Ada Reference Manual, 2012 Edition Ada Reference Manual 2012 Edition Language and Standard Libraries Copyright © 1992, 1993, 1994, 1995 Intermetrics, Inc. Copyright © 2000 The MITRE Corporation, Inc. Copyright © 2004, 2005, 2006 AXE Consultants Copyright © 2004, 2005, 2006 Ada-Europe Copyright © 2008, 2009, 2010, 2011, 2012 AXE Consultants Ada Reference Manual - Language and Standard Libraries Copyright © 1992, 1993, 1994, 1995, Intermetrics, Inc. This copyright is assigned to the U.S. Government. All rights reserved. This document may be copied, in whole or in part, in any form or by any means, as is or with alterations, provided that (1) alterations are clearly marked as alterations and (2) this copyright notice is included unmodified in any copy. Compiled copies of standard library units and examples need not contain this copyright notice so long as the notice is included in all copies of source code and documentation. Technical Corrigendum 1 Copyright © 2000, The MITRE Corporation. All Rights Reserved. This document may be copied, in whole or in part, in any form or by any means, as is, or with alterations, provided that (1) alterations are clearly marked as alterations and (2) this copyright notice is included unmodified in any copy. Any other use or distribution of this document is prohibited without the prior express permission of MITRE. You use this document on the condition that you indemnify and hold harmless MITRE, its Board of Trustees, officers, agents, and employees, from any and all liability or damages to yourself or your hardware or software, or third parties, including attorneys' fees, court costs, and other related costs and expenses, arising out of your use of this document irrespective of the cause of said liability. MITRE MAKES THIS DOCUMENT AVAILABLE ON AN "AS IS" BASIS AND MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE ACCURACY, CAPABILITY, EFFICIENCY MERCHANTABILITY, OR FUNCTIONING OF THIS DOCUMENT. IN NO EVENT WILL MITRE BE LIABLE FOR ANY GENERAL, CONSEQUENTIAL, INDIRECT, INCIDENTAL, EXEMPLARY, OR SPECIAL DAMAGES, EVEN IF MITRE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Amendment 1 Copyright © 2004, 2005, 2006, 2007, AXE Consultants. All Rights Reserved. This document may be copied, in whole or in part, in any form or by any means, as is, or with alterations, provided that (1) alterations are clearly marked as alterations and (2) this copyright notice is included unmodified in any copy. Any other use or distribution of this document is prohibited without the prior express permission of AXE. You use this document on the condition that you indemnify and hold harmless AXE, its board, officers, agents, and employees, from any and all liability or damages to yourself or your hardware or software, or third parties, including attorneys' fees, court costs, and other related costs and expenses, arising out of your use of this document irrespective of the cause of said liability. AXE MAKES THIS DOCUMENT AVAILABLE ON AN "AS IS" BASIS AND MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE ACCURACY, CAPABILITY, EFFICIENCY MERCHANTABILITY, OR FUNCTIONING OF THIS DOCUMENT. IN NO EVENT WILL AXE BE LIABLE FOR ANY GENERAL, CONSEQUENTIAL, INDIRECT, INCIDENTAL, EXEMPLARY, OR SPECIAL DAMAGES, EVEN IF AXE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Third Edition Copyright © 2008, 2009, 2010, 2011, 2012 AXE Consultants. All Rights Reserved. This document may be copied, in whole or in part, in any form or by any means, as is, or with alterations, provided that (1) alterations are clearly marked as alterations and (2) this copyright notice is included unmodified in any copy. Any other use or distribution of this document is prohibited without the prior express permission of AXE. You use this document on the condition that you indemnify and hold harmless AXE, its board, officers, agents, and employees, from any and all liability or damages to yourself or your hardware or software, or third parties, including attorneys' fees, court costs, and other related costs and expenses, arising out of your use of this document irrespective of the cause of said liability. AXE MAKES THIS DOCUMENT AVAILABLE ON AN "AS IS" BASIS AND MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE ACCURACY, CAPABILITY, EFFICIENCY MERCHANTABILITY, OR FUNCTIONING OF THIS DOCUMENT. IN NO EVENT WILL AXE BE LIABLE FOR ANY GENERAL, CONSEQUENTIAL, INDIRECT, INCIDENTAL, EXEMPLARY, OR SPECIAL DAMAGES, EVEN IF AXE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Ada 2005 Consolidated Standard Copyright © 2004, 2005, 2006, Ada-Europe. This document may be copied, in whole or in part, in any form or by any means, as is, or with alterations, provided that (1) alterations are clearly marked as alterations and (2) this copyright notice is included unmodified in any copy. Any other use or distribution of this document is prohibited without the prior express permission of Ada-Europe. You use this document on the condition that you indemnify and hold harmless Ada-Europe and its Board from any and all liability or damages to yourself or your hardware or software, or third parties, including attorneys' fees, court costs, and other related costs and expenses, arising out of your use of this document irrespective of the cause of said liability. ADA-EUROPE MAKES THIS DOCUMENT AVAILABLE ON AN "AS IS" BASIS AND MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE ACCURACY, CAPABILITY, EFFICIENCY MERCHANTABILITY, OR FUNCTIONING OF THIS DOCUMENT. IN NO EVENT WILL ADA- EUROPE BE LIABLE FOR ANY GENERAL, CONSEQUENTIAL, INDIRECT, INCIDENTAL, EXEMPLARY, OR SPECIAL DAMAGES, EVEN IF ADA-EUROPE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Ada Reference Manual — 2012 Edition Table of Contents Table of Contents............................................................................................................i Introduction ...................................................................................................................xi 1 General.......................................................................................................................1 1.1 Scope .............................................................................................................................................1 1.1.1 Extent ......................................................................................................................................1 1.1.2 Structure .................................................................................................................................2 1.1.3 Conformity of an Implementation with the Standard.........................................................4 1.1.4 Method of Description and Syntax Notation.......................................................................5 1.1.5 Classification of Errors .........................................................................................................6 1.2 Normative References ..................................................................................................................7 1.3 Terms and Definitions ..................................................................................................................8 2 Lexical Elements .......................................................................................................9 2.1 Character Set.................................................................................................................................9 2.2 Lexical Elements, Separators, and Delimiters.........................................................................11 2.3 Identifiers .....................................................................................................................................12 2.4 Numeric Literals ..........................................................................................................................13 2.4.1 Decimal Literals ...................................................................................................................13 2.4.2 Based Literals ......................................................................................................................14 2.5 Character Literals .......................................................................................................................14 2.6 String Literals ..............................................................................................................................15 2.7 Comments....................................................................................................................................15 2.8 Pragmas .......................................................................................................................................16 2.9 Reserved Words..........................................................................................................................18 3 Declarations and Types..........................................................................................19 3.1 Declarations.................................................................................................................................19 3.2 Types and Subtypes ...................................................................................................................20 3.2.1 Type Declarations................................................................................................................22 3.2.2 Subtype Declarations ..........................................................................................................23 3.2.3 Classification of Operations...............................................................................................24 3.2.4 Subtype Predicates .............................................................................................................25 3.3 Objects and Named Numbers....................................................................................................27 3.3.1 Object Declarations .............................................................................................................29 3.3.2 Number Declarations...........................................................................................................31 3.4 Derived Types and Classes .......................................................................................................32 3.4.1 Derivation Classes...............................................................................................................35 3.5 Scalar Types ................................................................................................................................37 3.5.1 Enumeration Types .............................................................................................................42 3.5.2 Character Types...................................................................................................................43 3.5.3 Boolean Types .....................................................................................................................44 3.5.4 Integer Types .......................................................................................................................44 3.5.5 Operations of Discrete Types.............................................................................................47 3.5.6 Real Types ............................................................................................................................48 3.5.7 Floating Point Types ...........................................................................................................49 3.5.8 Operations of Floating Point Types...................................................................................51 3.5.9 Fixed Point Types ................................................................................................................51 3.5.10 Operations of Fixed Point Types .....................................................................................53 i 13 December 2012 Table of Contents Ada Reference Manual — 2012 Edition 3.6 Array Types ................................................................................................................................. 54 3.6.1 Index Constraints and Discrete Ranges ........................................................................... 57 3.6.2 Operations of Array Types ................................................................................................. 58 3.6.3 String Types......................................................................................................................... 59 3.7 Discriminants .............................................................................................................................. 60 3.7.1 Discriminant Constraints ................................................................................................... 62 3.7.2 Operations of Discriminated Types .................................................................................. 63 3.8 Record Types.............................................................................................................................. 64 3.8.1 Variant Parts and Discrete Choices .................................................................................. 66 3.9 Tagged Types and Type Extensions ........................................................................................ 68 3.9.1 Type Extensions.................................................................................................................. 72 3.9.2 Dispatching Operations of Tagged Types........................................................................ 73 3.9.3 Abstract Types and Subprograms .................................................................................... 76 3.9.4 Interface Types .................................................................................................................... 77 3.10 Access Types............................................................................................................................ 80 3.10.1 Incomplete Type Declarations ......................................................................................... 82 3.10.2 Operations of Access Types............................................................................................ 85 3.11 Declarative Parts ...................................................................................................................... 91 3.11.1 Completions of Declarations ........................................................................................... 91 4 Names and Expressions ........................................................................................ 93 4.1 Names .......................................................................................................................................... 93 4.1.1 Indexed Components.......................................................................................................... 94 4.1.2 Slices .................................................................................................................................... 95 4.1.3 Selected Components ........................................................................................................ 96 4.1.4 Attributes.............................................................................................................................. 98 4.1.5 User-Defined References ................................................................................................... 99 4.1.6 User-Defined Indexing ...................................................................................................... 100 4.2 Literals ....................................................................................................................................... 102 4.3 Aggregates ................................................................................................................................ 103 4.3.1 Record Aggregates ........................................................................................................... 103 4.3.2 Extension Aggregates ...................................................................................................... 105 4.3.3 Array Aggregates .............................................................................................................. 107 4.4 Expressions .............................................................................................................................. 110 4.5 Operators and Expression Evaluation ................................................................................... 111 4.5.1 Logical Operators and Short-circuit Control Forms ..................................................... 112 4.5.2 Relational Operators and Membership Tests ................................................................ 113 4.5.3 Binary Adding Operators ................................................................................................. 117 4.5.4 Unary Adding Operators .................................................................................................. 118 4.5.5 Multiplying Operators ....................................................................................................... 118 4.5.6 Highest Precedence Operators ....................................................................................... 121 4.5.7 Conditional Expressions .................................................................................................. 122 4.5.8 Quantified Expressions .................................................................................................... 123 4.6 Type Conversions .................................................................................................................... 124 4.7 Qualified Expressions.............................................................................................................. 129 4.8 Allocators .................................................................................................................................. 129 4.9 Static Expressions and Static Subtypes................................................................................ 132 4.9.1 Statically Matching Constraints and Subtypes.............................................................. 136 5 Statements............................................................................................................. 137 5.1 Simple and Compound Statements - Sequences of Statements ........................................ 137 5.2 Assignment Statements........................................................................................................... 138 5.3 If Statements ............................................................................................................................. 140 5.4 Case Statements....................................................................................................................... 141 Table of Contents 13 December 2012 ii Ada Reference Manual — 2012 Edition 5.5 Loop Statements.......................................................................................................................142 5.5.1 User-Defined Iterator Types .............................................................................................144 5.5.2 Generalized Loop Iteration ...............................................................................................145 5.6 Block Statements......................................................................................................................147 5.7 Exit Statements .........................................................................................................................147 5.8 Goto Statements .......................................................................................................................148 6 Subprograms.........................................................................................................151 6.1 Subprogram Declarations ........................................................................................................151 6.1.1 Preconditions and Postconditions ..................................................................................154 6.2 Formal Parameter Modes .........................................................................................................157 6.3 Subprogram Bodies..................................................................................................................158 6.3.1 Conformance Rules...........................................................................................................159 6.3.2 Inline Expansion of Subprograms ...................................................................................161 6.4 Subprogram Calls .....................................................................................................................161 6.4.1 Parameter Associations....................................................................................................163 6.5 Return Statements ....................................................................................................................166 6.5.1 Nonreturning Procedures .................................................................................................169 6.6 Overloading of Operators ........................................................................................................170 6.7 Null Procedures ........................................................................................................................171 6.8 Expression Functions ..............................................................................................................172 7 Packages................................................................................................................173 7.1 Package Specifications and Declarations..............................................................................173 7.2 Package Bodies ........................................................................................................................174 7.3 Private Types and Private Extensions....................................................................................175 7.3.1 Private Operations.............................................................................................................178 7.3.2 Type Invariants...................................................................................................................180 7.4 Deferred Constants...................................................................................................................182 7.5 Limited Types ............................................................................................................................183 7.6 Assignment and Finalization ...................................................................................................185 7.6.1 Completion and Finalization.............................................................................................187 8 Visibility Rules.......................................................................................................191 8.1 Declarative Region....................................................................................................................191 8.2 Scope of Declarations ..............................................................................................................192 8.3 Visibility......................................................................................................................................193 8.3.1 Overriding Indicators ........................................................................................................196 8.4 Use Clauses...............................................................................................................................197 8.5 Renaming Declarations ............................................................................................................198 8.5.1 Object Renaming Declarations ........................................................................................198 8.5.2 Exception Renaming Declarations ..................................................................................200 8.5.3 Package Renaming Declarations.....................................................................................200 8.5.4 Subprogram Renaming Declarations ..............................................................................201 8.5.5 Generic Renaming Declarations ......................................................................................203 8.6 The Context of Overload Resolution ......................................................................................203 9 Tasks and Synchronization .................................................................................207 9.1 Task Units and Task Objects...................................................................................................207 9.2 Task Execution - Task Activation............................................................................................210 9.3 Task Dependence - Termination of Tasks..............................................................................211 9.4 Protected Units and Protected Objects ..................................................................................213 9.5 Intertask Communication.........................................................................................................216 9.5.1 Protected Subprograms and Protected Actions ............................................................218 iii 13 December 2012 Table of Contents Ada Reference Manual — 2012 Edition 9.5.2 Entries and Accept Statements ....................................................................................... 219 9.5.3 Entry Calls.......................................................................................................................... 222 9.5.4 Requeue Statements......................................................................................................... 225 9.6 Delay Statements, Duration, and Time................................................................................... 226 9.6.1 Formatting, Time Zones, and other operations for Time .............................................. 229 9.7 Select Statements..................................................................................................................... 235 9.7.1 Selective Accept ................................................................................................................ 236 9.7.2 Timed Entry Calls .............................................................................................................. 238 9.7.3 Conditional Entry Calls..................................................................................................... 239 9.7.4 Asynchronous Transfer of Control ................................................................................. 239 9.8 Abort of a Task - Abort of a Sequence of Statements .......................................................... 240 9.9 Task and Entry Attributes........................................................................................................ 242 9.10 Shared Variables .................................................................................................................... 242 9.11 Example of Tasking and Synchronization ........................................................................... 244 10 Program Structure and Compilation Issues .................................................... 247 10.1 Separate Compilation............................................................................................................. 247 10.1.1 Compilation Units - Library Units .................................................................................. 247 10.1.2 Context Clauses - With Clauses .................................................................................... 250 10.1.3 Subunits of Compilation Units ...................................................................................... 252 10.1.4 The Compilation Process ............................................................................................... 254 10.1.5 Pragmas and Program Units.......................................................................................... 255 10.1.6 Environment-Level Visibility Rules ............................................................................... 256 10.2 Program Execution................................................................................................................. 257 10.2.1 Elaboration Control......................................................................................................... 259 11 Exceptions........................................................................................................... 263 11.1 Exception Declarations.......................................................................................................... 263 11.2 Exception Handlers ................................................................................................................ 264 11.3 Raise Statements.................................................................................................................... 265 11.4 Exception Handling ................................................................................................................ 265 11.4.1 The Package Exceptions ................................................................................................ 266 11.4.2 Pragmas Assert and Assertion_Policy ......................................................................... 268 11.4.3 Example of Exception Handling .................................................................................... 271 11.5 Suppressing Checks.............................................................................................................. 272 11.6 Exceptions and Optimization ................................................................................................ 275 12 Generic Units....................................................................................................... 277 12.1 Generic Declarations.............................................................................................................. 277 12.2 Generic Bodies ....................................................................................................................... 279 12.3 Generic Instantiation.............................................................................................................. 280 12.4 Formal Objects ....................................................................................................................... 282 12.5 Formal Types .......................................................................................................................... 284 12.5.1 Formal Private and Derived Types ................................................................................ 285 12.5.2 Formal Scalar Types ....................................................................................................... 288 12.5.3 Formal Array Types......................................................................................................... 288 12.5.4 Formal Access Types ..................................................................................................... 289 12.5.5 Formal Interface Types................................................................................................... 290 12.6 Formal Subprograms ............................................................................................................. 290 12.7 Formal Packages .................................................................................................................... 293 12.8 Example of a Generic Package ............................................................................................. 295 13 Representation Issues ....................................................................................... 297 13.1 Operational and Representation Aspects............................................................................ 297 Table of Contents 13 December 2012 iv Ada Reference Manual — 2012 Edition 13.1.1 Aspect Specifications .....................................................................................................300 13.2 Packed Types ..........................................................................................................................303 13.3 Operational and Representation Attributes .........................................................................304 13.4 Enumeration Representation Clauses..................................................................................310 13.5 Record Layout .........................................................................................................................311 13.5.1 Record Representation Clauses ....................................................................................312 13.5.2 Storage Place Attributes .................................................................................................314 13.5.3 Bit Ordering ......................................................................................................................315 13.6 Change of Representation .....................................................................................................316 13.7 The Package System ..............................................................................................................317 13.7.1 The Package System.Storage_Elements ......................................................................319 13.7.2 The Package System.Address_To_Access_Conversions ..........................................320 13.8 Machine Code Insertions .......................................................................................................320 13.9 Unchecked Type Conversions ..............................................................................................321 13.9.1 Data Validity .....................................................................................................................322 13.9.2 The Valid Attribute...........................................................................................................324 13.10 Unchecked Access Value Creation.....................................................................................324 13.11 Storage Management............................................................................................................325 13.11.1 Storage Allocation Attributes .......................................................................................328 13.11.2 Unchecked Storage Deallocation ................................................................................329 13.11.3 Default Storage Pools ...................................................................................................330 13.11.4 Storage Subpools ..........................................................................................................331 13.11.5 Subpool Reclamation....................................................................................................333 13.11.6 Storage Subpool Example ............................................................................................334 13.12 Pragma Restrictions and Pragma Profile...........................................................................336 13.12.1 Language-Defined Restrictions and Profiles .............................................................338 13.13 Streams ..................................................................................................................................340 13.13.1 The Package Streams ...................................................................................................340 13.13.2 Stream-Oriented Attributes ..........................................................................................341 13.14 Freezing Rules ......................................................................................................................346 The Standard Libraries ..............................................................................................349 Annex A (normative) Predefined Language Environment ......................................351 A.1 The Package Standard.............................................................................................................354 A.2 The Package Ada......................................................................................................................358 A.3 Character Handling ..................................................................................................................358 A.3.1 The Packages Characters, Wide_Characters, and Wide_Wide_Characters...............359 A.3.2 The Package Characters.Handling..................................................................................359 A.3.3 The Package Characters.Latin_1.....................................................................................362 A.3.4 The Package Characters.Conversions ...........................................................................367 A.3.5 The Package Wide_Characters.Handling .......................................................................369 A.3.6 The Package Wide_Wide_Characters.Handling ............................................................371 A.4 String Handling.........................................................................................................................372 A.4.1 The Package Strings.........................................................................................................372 A.4.2 The Package Strings.Maps ..............................................................................................372 A.4.3 Fixed-Length String Handling..........................................................................................375 A.4.4 Bounded-Length String Handling ...................................................................................384 A.4.5 Unbounded-Length String Handling...............................................................................391 A.4.6 String-Handling Sets and Mappings ...............................................................................396 A.4.7 Wide_String Handling.......................................................................................................397 A.4.8 Wide_Wide_String Handling ............................................................................................399 A.4.9 String Hashing...................................................................................................................402 A.4.10 String Comparison..........................................................................................................403 v 13 December 2012 Table of Contents Ada Reference Manual — 2012 Edition A.4.11 String Encoding .............................................................................................................. 404 A.5 The Numerics Packages.......................................................................................................... 409 A.5.1 Elementary Functions ...................................................................................................... 410 A.5.2 Random Number Generation........................................................................................... 413 A.5.3 Attributes of Floating Point Types.................................................................................. 418 A.5.4 Attributes of Fixed Point Types ...................................................................................... 422 A.6 Input-Output ............................................................................................................................. 423 A.7 External Files and File Objects............................................................................................... 423 A.8 Sequential and Direct Files ..................................................................................................... 424 A.8.1 The Generic Package Sequential_IO .............................................................................. 425 A.8.2 File Management............................................................................................................... 426 A.8.3 Sequential Input-Output Operations .............................................................................. 428 A.8.4 The Generic Package Direct_IO ...................................................................................... 428 A.8.5 Direct Input-Output Operations....................................................................................... 429 A.9 The Generic Package Storage_IO .......................................................................................... 430 A.10 Text Input-Output................................................................................................................... 431 A.10.1 The Package Text_IO ..................................................................................................... 432 A.10.2 Text File Management .................................................................................................... 437 A.10.3 Default Input, Output, and Error Files .......................................................................... 438 A.10.4 Specification of Line and Page Lengths ...................................................................... 439 A.10.5 Operations on Columns, Lines, and Pages ................................................................. 440 A.10.6 Get and Put Procedures................................................................................................. 443 A.10.7 Input-Output of Characters and Strings....................................................................... 445 A.10.8 Input-Output for Integer Types...................................................................................... 447 A.10.9 Input-Output for Real Types .......................................................................................... 448 A.10.10 Input-Output for Enumeration Types ......................................................................... 451 A.10.11 Input-Output for Bounded Strings.............................................................................. 452 A.10.12 Input-Output for Unbounded Strings ......................................................................... 454 A.11 Wide Text Input-Output and Wide Wide Text Input-Output............................................... 455 A.12 Stream Input-Output .............................................................................................................. 456 A.12.1 The Package Streams.Stream_IO ................................................................................. 456 A.12.2 The Package Text_IO.Text_Streams............................................................................. 458 A.12.3 The Package Wide_Text_IO.Text_Streams .................................................................. 459 A.12.4 The Package Wide_Wide_Text_IO.Text_Streams ....................................................... 459 A.13 Exceptions in Input-Output................................................................................................... 459 A.14 File Sharing............................................................................................................................. 461 A.15 The Package Command_Line............................................................................................... 461 A.16 The Package Directories ....................................................................................................... 462 A.16.1 The Package Directories.Hierarchical_File_Names.................................................... 470 A.17 The Package Environment_Variables.................................................................................. 472 A.18 Containers .............................................................................................................................. 475 A.18.1 The Package Containers................................................................................................ 475 A.18.2 The Generic Package Containers.Vectors ................................................................... 475 A.18.3 The Generic Package Containers.Doubly_Linked_Lists............................................ 493 A.18.4 Maps................................................................................................................................. 504 A.18.5 The Generic Package Containers.Hashed_Maps........................................................ 511 A.18.6 The Generic Package Containers.Ordered_Maps....................................................... 515 A.18.7 Sets .................................................................................................................................. 519 A.18.8 The Generic Package Containers.Hashed_Sets ......................................................... 527 A.18.9 The Generic Package Containers.Ordered_Sets ........................................................ 532 A.18.10 The Generic Package Containers.Multiway_Trees ................................................... 538 A.18.11 The Generic Package Containers.Indefinite_Vectors............................................... 552 A.18.12 The Generic Package Containers.Indefinite_Doubly_Linked_Lists ....................... 553 Table of Contents 13 December 2012 vi Ada Reference Manual — 2012 Edition A.18.13 The Generic Package Containers.Indefinite_Hashed_Maps ....................................553 A.18.14 The Generic Package Containers.Indefinite_Ordered_Maps ...................................554 A.18.15 The Generic Package Containers.Indefinite_Hashed_Sets......................................554 A.18.16 The Generic Package Containers.Indefinite_Ordered_Sets.....................................554 A.18.17 The Generic Package Containers.Indefinite_Multiway_Trees .................................555 A.18.18 The Generic Package Containers.Indefinite_Holders ...............................................555 A.18.19 The Generic Package Containers.Bounded_Vectors ...............................................559 A.18.20 The Generic Package Containers.Bounded_Doubly_Linked_Lists ........................560 A.18.21 The Generic Package Containers.Bounded_Hashed_Maps ....................................561 A.18.22 The Generic Package Containers.Bounded_Ordered_Maps ...................................562 A.18.23 The Generic Package Containers.Bounded_Hashed_Sets ......................................563 A.18.24 The Generic Package Containers.Bounded_Ordered_Sets .....................................565 A.18.25 The Generic Package Containers.Bounded_Multiway_Trees..................................566 A.18.26 Array Sorting .................................................................................................................568 A.18.27 The Generic Package Containers.Synchronized_Queue_Interfaces ......................569 A.18.28 The Generic Package Containers.Unbounded_Synchronized_Queues .................570 A.18.29 The Generic Package Containers.Bounded_Synchronized_Queues......................571 A.18.30 The Generic Package Containers.Unbounded_Priority_Queues ............................572 A.18.31 The Generic Package Containers.Bounded_Priority_Queues.................................573 A.18.32 Example of Container Use ...........................................................................................574 A.19 The Package Locales .............................................................................................................576 Annex B (normative) Interface to Other Languages................................................579 B.1 Interfacing Aspects ..................................................................................................................579 B.2 The Package Interfaces ...........................................................................................................582 B.3 Interfacing with C and C++......................................................................................................583 B.3.1 The Package Interfaces.C.Strings...................................................................................591 B.3.2 The Generic Package Interfaces.C.Pointers ..................................................................594 B.3.3 Unchecked Union Types ..................................................................................................597 B.4 Interfacing with COBOL...........................................................................................................599 B.5 Interfacing with Fortran ...........................................................................................................605 Annex C (normative) Systems Programming ...........................................................609 C.1 Access to Machine Operations ...............................................................................................609 C.2 Required Representation Support..........................................................................................610 C.3 Interrupt Support......................................................................................................................610 C.3.1 Protected Procedure Handlers ........................................................................................612 C.3.2 The Package Interrupts ....................................................................................................614 C.4 Preelaboration Requirements .................................................................................................616 C.5 Pragma Discard_Names ..........................................................................................................617 C.6 Shared Variable Control ..........................................................................................................618 C.7 Task Information ......................................................................................................................620 C.7.1 The Package Task_Identification ....................................................................................620 C.7.2 The Package Task_Attributes..........................................................................................622 C.7.3 The Package Task_Termination ......................................................................................624 Annex D (normative) Real-Time Systems .................................................................627 D.1 Task Priorities...........................................................................................................................627 D.2 Priority Scheduling ..................................................................................................................629 D.2.1 The Task Dispatching Model ...........................................................................................629 D.2.2 Task Dispatching Pragmas ..............................................................................................631 D.2.3 Preemptive Dispatching ...................................................................................................632 D.2.4 Non-Preemptive Dispatching...........................................................................................633 D.2.5 Round Robin Dispatching................................................................................................635 vii 13 December 2012 Table of Contents Ada Reference Manual — 2012 Edition D.2.6 Earliest Deadline First Dispatching ................................................................................ 636 D.3 Priority Ceiling Locking........................................................................................................... 638 D.4 Entry Queuing Policies............................................................................................................ 640 D.5 Dynamic Priorities ................................................................................................................... 642 D.5.1 Dynamic Priorities for Tasks ........................................................................................... 642 D.5.2 Dynamic Priorities for Protected Objects ...................................................................... 643 D.6 Preemptive Abort ..................................................................................................................... 644 D.7 Tasking Restrictions................................................................................................................ 645 D.8 Monotonic Time ....................................................................................................................... 647 D.9 Delay Accuracy ........................................................................................................................ 651 D.10 Synchronous Task Control................................................................................................... 652 D.10.1 Synchronous Barriers.................................................................................................... 653 D.11 Asynchronous Task Control................................................................................................. 654 D.12 Other Optimizations and Determinism Rules ..................................................................... 655 D.13 The Ravenscar Profile ........................................................................................................... 656 D.14 Execution Time ...................................................................................................................... 657 D.14.1 Execution Time Timers .................................................................................................. 659 D.14.2 Group Execution Time Budgets.................................................................................... 661 D.14.3 Execution Time of Interrupt Handlers .......................................................................... 663 D.15 Timing Events......................................................................................................................... 664 D.16 Multiprocessor Implementation ........................................................................................... 666 D.16.1 Multiprocessor Dispatching Domains.......................................................................... 667 Annex E (normative) Distributed Systems ............................................................... 671 E.1 Partitions................................................................................................................................... 671 E.2 Categorization of Library Units .............................................................................................. 673 E.2.1 Shared Passive Library Units .......................................................................................... 674 E.2.2 Remote Types Library Units ............................................................................................ 674 E.2.3 Remote Call Interface Library Units................................................................................ 676 E.3 Consistency of a Distributed System .................................................................................... 677 E.4 Remote Subprogram Calls...................................................................................................... 677 E.4.1 Asynchronous Remote Calls........................................................................................... 679 E.4.2 Example of Use of a Remote Access-to-Class-Wide Type........................................... 680 E.5 Partition Communication Subsystem.................................................................................... 682 Annex F (normative) Information Systems............................................................... 685 F.1 Machine_Radix Attribute Definition Clause .......................................................................... 685 F.2 The Package Decimal............................................................................................................... 686 F.3 Edited Output for Decimal Types ........................................................................................... 687 F.3.1 Picture String Formation.................................................................................................. 688 F.3.2 Edited Output Generation ................................................................................................ 692 F.3.3 The Package Text_IO.Editing........................................................................................... 696 F.3.4 The Package Wide_Text_IO.Editing................................................................................ 699 F.3.5 The Package Wide_Wide_Text_IO.Editing ..................................................................... 699 Annex G (normative) Numerics ................................................................................. 701 G.1 Complex Arithmetic................................................................................................................. 701 G.1.1 Complex Types ................................................................................................................. 701 G.1.2 Complex Elementary Functions ..................................................................................... 706 G.1.3 Complex Input-Output ..................................................................................................... 709 G.1.4 The Package Wide_Text_IO.Complex_IO ...................................................................... 712 G.1.5 The Package Wide_Wide_Text_IO.Complex_IO............................................................ 712 G.2 Numeric Performance Requirements .................................................................................... 712 G.2.1 Model of Floating Point Arithmetic................................................................................. 713 Table of Contents 13 December 2012 viii Ada Reference Manual — 2012 Edition G.2.2 Model-Oriented Attributes of Floating Point Types ......................................................714 G.2.3 Model of Fixed Point Arithmetic......................................................................................715 G.2.4 Accuracy Requirements for the Elementary Functions ...............................................717 G.2.5 Performance Requirements for Random Number Generation ....................................719 G.2.6 Accuracy Requirements for Complex Arithmetic..........................................................719 G.3 Vector and Matrix Manipulation..............................................................................................721 G.3.1 Real Vectors and Matrices ...............................................................................................721 G.3.2 Complex Vectors and Matrices .......................................................................................726 Annex H (normative) High Integrity Systems ...........................................................739 H.1 Pragma Normalize_Scalars .....................................................................................................739 H.2 Documentation of Implementation Decisions.......................................................................740 H.3 Reviewable Object Code .........................................................................................................740 H.3.1 Pragma Reviewable ..........................................................................................................740 H.3.2 Pragma Inspection_Point.................................................................................................741 H.4 High Integrity Restrictions ......................................................................................................742 H.5 Pragma Detect_Blocking .........................................................................................................744 H.6 Pragma Partition_Elaboration_Policy ....................................................................................745 Annex J (normative) Obsolescent Features .............................................................747 J.1 Renamings of Library Units .....................................................................................................747 J.2 Allowed Replacements of Characters ....................................................................................747 J.3 Reduced Accuracy Subtypes ..................................................................................................748 J.4 The Constrained Attribute........................................................................................................749 J.5 ASCII...........................................................................................................................................749 J.6 Numeric_Error ...........................................................................................................................750 J.7 At Clauses..................................................................................................................................750 J.7.1 Interrupt Entries.................................................................................................................750 J.8 Mod Clauses ..............................................................................................................................752 J.9 The Storage_Size Attribute ......................................................................................................752 J.10 Specific Suppression of Checks ...........................................................................................752 J.11 The Class Attribute of Untagged Incomplete Types ...........................................................753 J.12 Pragma Interface.....................................................................................................................753 J.13 Dependence Restriction Identifiers ......................................................................................753 J.14 Character and Wide_Character Conversion Functions......................................................754 J.15 Aspect-related Pragmas.........................................................................................................754 J.15.1 Pragma Inline ...................................................................................................................754 J.15.2 Pragma No_Return ..........................................................................................................755 J.15.3 Pragma Pack ....................................................................................................................755 J.15.4 Pragma Storage_Size......................................................................................................755 J.15.5 Interfacing Pragmas ........................................................................................................756 J.15.6 Pragma Unchecked_Union .............................................................................................757 J.15.7 Pragmas Interrupt_Handler and Attach_Handler.........................................................757 J.15.8 Shared Variable Pragmas ...............................................................................................758 J.15.9 Pragma CPU .....................................................................................................................758 J.15.10 Pragma Dispatching_Domain ......................................................................................759 J.15.11 Pragmas Priority and Interrupt_Priority......................................................................759 J.15.12 Pragma Relative_Deadline............................................................................................760 J.15.13 Pragma Asynchronous .................................................................................................760 Annex K (informative) Language-Defined Aspects and Attributes ........................761 K.1 Language-Defined Aspects .....................................................................................................761 K.2 Language-Defined Attributes ..................................................................................................764 Annex L (informative) Language-Defined Pragmas .................................................781 ix 13 December 2012 Table of Contents Ada Reference Manual — 2012 Edition Annex M (informative) Summary of Documentation Requirements ...................... 785 M.1 Specific Documentation Requirements ................................................................................ 785 M.2 Implementation-Defined Characteristics .............................................................................. 787 M.3 Implementation Advice ........................................................................................................... 794 Annex N (informative) Glossary................................................................................. 803 Annex P (informative) Syntax Summary ................................................................... 809 Annex Q (informative) Language-Defined Entities .................................................. 843 Q.1 Language-Defined Packages.................................................................................................. 843 Q.2 Language-Defined Types and Subtypes ............................................................................... 846 Q.3 Language-Defined Subprograms........................................................................................... 850 Q.4 Language-Defined Exceptions ............................................................................................... 861 Q.5 Language-Defined Objects ..................................................................................................... 862 Index............................................................................................................................ 867 Table of Contents 13 December 2012 x Ada Reference Manual — 2012 Edition Introduction This is the Ada Reference Manual. Other available Ada documents include: • Ada 2012 Rationale. This gives an introduction to the changes and new features in Ada 2012, and explains the rationale behind them. Programmers should read this rationale before reading this Standard in depth. Rationales for Ada 83, Ada 95, and Ada 2005 are also available. • This paragraph was deleted. • The Annotated Ada Reference Manual (AARM). The AARM contains all of the text in this International Standard, plus various annotations. It is intended primarily for compiler writers, validation test writers, and others who wish to study the fine details. The annotations include detailed rationale for individual rules and explanations of some of the more arcane interactions among the rules. Design Goals Ada was originally designed with three overriding concerns: program reliability and maintenance, programming as a human activity, and efficiency. The 1995 revision to the language was designed to provide greater flexibility and extensibility, additional control over storage management and synchronization, and standardized packages oriented toward supporting important application areas, while at the same time retaining the original emphasis on reliability, maintainability, and efficiency. This third edition provides further flexibility and adds more standardized packages within the framework provided by the 1995 revision. The need for languages that promote reliability and simplify maintenance is well established. Hence emphasis was placed on program readability over ease of writing. For example, the rules of the language require that program variables be explicitly declared and that their type be specified. Since the type of a variable is invariant, compilers can ensure that operations on variables are compatible with the properties intended for objects of the type. Furthermore, error-prone notations have been avoided, and the syntax of the language avoids the use of encoded forms in favor of more English-like constructs. Finally, the language offers support for separate compilation of program units in a way that facilitates program development and maintenance, and which provides the same degree of checking between units as within a unit. Concern for the human programmer was also stressed during the design. Above all, an attempt was made to keep to a relatively small number of underlying concepts integrated in a consistent and systematic way while continuing to avoid the pitfalls of excessive involution. The design especially aims to provide language constructs that correspond intuitively to the normal expectations of users. Like many other human activities, the development of programs is becoming ever more decentralized and distributed. Consequently, the ability to assemble a program from independently produced software components continues to be a central idea in the design. The concepts of packages, of private types, and of generic units are directly related to this idea, which has ramifications in many other aspects of the language. An allied concern is the maintenance of programs to match changing requirements; type extension and the hierarchical library enable a program to be modified while minimizing disturbance to existing tested and trusted components. 1 2 3/3 4/1 5/3 6/3 7 8 9 No language can avoid the problem of efficiency. Languages that require over-elaborate compilers, or that lead to the inefficient use of storage or execution time, force these inefficiencies on all machines and on all 10 xi 13 December 2012 Introduction Ada Reference Manual — 2012 Edition programs. Every construct of the language was examined in the light of present implementation techniques. Any proposed construct whose implementation was unclear or that required excessive machine resources was rejected. Language Summary An Ada program is composed of one or more program units. Program units may be subprograms (which define executable algorithms), packages (which define collections of entities), task units (which define concurrent computations), protected units (which define operations for the coordinated sharing of data between tasks), or generic units (which define parameterized forms of packages and subprograms). Each program unit normally consists of two parts: a specification, containing the information that must be visible to other units, and a body, containing the implementation details, which need not be visible to other units. Most program units can be compiled separately. This distinction of the specification and body, and the ability to compile units separately, allows a program to be designed, written, and tested as a set of largely independent software components. An Ada program will normally make use of a library of program units of general utility. The language provides means whereby individual organizations can construct their own libraries. All libraries are structured in a hierarchical manner; this enables the logical decomposition of a subsystem into individual components. The text of a separately compiled program unit must name the library units it requires. Program Units A subprogram is the basic unit for expressing an algorithm. There are two kinds of subprograms: procedures and functions. A procedure is the means of invoking a series of actions. For example, it may read data, update variables, or produce some output. It may have parameters, to provide a controlled means of passing information between the procedure and the point of call. A function is the means of invoking the computation of a value. It is similar to a procedure, but in addition will return a result. A package is the basic unit for defining a collection of logically related entities. For example, a package can be used to define a set of type declarations and associated operations. Portions of a package can be hidden from the user, thus allowing access only to the logical properties expressed by the package specification. Subprogram and package units may be compiled separately and arranged in hierarchies of parent and child units giving fine control over visibility of the logical properties and their detailed implementation. A task unit is the basic unit for defining a task whose sequence of actions may be executed concurrently with those of other tasks. Such tasks may be implemented on multicomputers, multiprocessors, or with interleaved execution on a single processor. A task unit may define either a single executing task or a task type permitting the creation of any number of similar tasks. 11 12 13 14 15 16 17 18 19/2 A protected unit is the basic unit for defining protected operations for the coordinated use of data shared between tasks. Simple mutual exclusion is provided automatically, and more elaborate sharing protocols can be defined. A protected operation can either be a subprogram or an entry. A protected entry specifies a Boolean expression (an entry barrier) that must be True before the body of the entry is executed. A protected unit may define a single protected object or a protected type permitting the creation of several similar objects. Introduction 13 December 2012 xii Ada Reference Manual — 2012 Edition Declarations and Statements The body of a program unit generally contains two parts: a declarative part, which defines the logical entities to be used in the program unit, and a sequence of statements, which defines the execution of the program unit. The declarative part associates names with declared entities. For example, a name may denote a type, a constant, a variable, or an exception. A declarative part also introduces the names and parameters of other nested subprograms, packages, task units, protected units, and generic units to be used in the program unit. The sequence of statements describes a sequence of actions that are to be performed. The statements are executed in succession (unless a transfer of control causes execution to continue from another place). An assignment statement changes the value of a variable. A procedure call invokes execution of a procedure after associating any actual parameters provided at the call with the corresponding formal parameters. Case statements and if statements allow the selection of an enclosed sequence of statements based on the value of an expression or on the value of a condition. The loop statement provides the basic iterative mechanism in the language. A loop statement specifies that a sequence of statements is to be executed repeatedly as directed by an iteration scheme, or until an exit statement is encountered. A block statement comprises a sequence of statements preceded by the declaration of local entities used by the statements. Certain statements are associated with concurrent execution. A delay statement delays the execution of a task for a specified duration or until a specified time. An entry call statement is written as a procedure call statement; it requests an operation on a task or on a protected object, blocking the caller until the operation can be performed. A called task may accept an entry call by executing a corresponding accept statement, which specifies the actions then to be performed as part of the rendezvous with the calling task. An entry call on a protected object is processed when the corresponding entry barrier evaluates to true, whereupon the body of the entry is executed. The requeue statement permits the provision of a service as a number of related activities with preference control. One form of the select statement allows a selective wait for one of several alternative rendezvous. Other forms of the select statement allow conditional or timed entry calls and the asynchronous transfer of control in response to some triggering event. Execution of a program unit may encounter error situations in which normal program execution cannot continue. For example, an arithmetic computation may exceed the maximum allowed value of a number, or an attempt may be made to access an array component by using an incorrect index value. To deal with such error situations, the statements of a program unit can be textually followed by exception handlers that specify the actions to be taken when the error situation arises. Exceptions can be raised explicitly by a raise statement. Data Types Every object in the language has a type, which characterizes a set of values and a set of applicable operations. The main classes of types are elementary types (comprising enumeration, numeric, and access types) and composite types (including array and record types). 20 21 22 23 24 25 26 27 28 29 30 31 An enumeration type defines an ordered set of distinct enumeration literals, for example a list of states or an alphabet of characters. The enumeration types Boolean, Character, Wide_Character, and Wide_Wide_Character are predefined. 32/2 xiii 13 December 2012 Introduction Ada Reference Manual — 2012 Edition 33 34/2 35 36 37 38 Numeric types provide a means of performing exact or approximate numerical computations. Exact computations use integer types, which denote sets of consecutive integers. Approximate computations use either fixed point types, with absolute bounds on the error, or floating point types, with relative bounds on the error. The numeric types Integer, Float, and Duration are predefined. Composite types allow definitions of structured objects with related components. The composite types in the language include arrays and records. An array is an object with indexed components of the same type. A record is an object with named components of possibly different types. Task and protected types are also forms of composite types. The array types String, Wide_String, and Wide_Wide_String are predefined. Record, task, and protected types may have special components called discriminants which parameterize the type. Variant record structures that depend on the values of discriminants can be defined within a record type. Access types allow the construction of linked data structures. A value of an access type represents a reference to an object declared as aliased or to an object created by the evaluation of an allocator. Several variables of an access type may designate the same object, and components of one object may designate the same or other objects. Both the elements in such linked data structures and their relation to other elements can be altered during program execution. Access types also permit references to subprograms to be stored, passed as parameters, and ultimately dereferenced as part of an indirect call. Private types permit restricted views of a type. A private type can be defined in a package so that only the logically necessary properties are made visible to the users of the type. The full structural details that are externally irrelevant are then only available within the package and any child units. From any type a new type may be defined by derivation. A type, together with its derivatives (both direct and indirect) form a derivation class. Class-wide operations may be defined that accept as a parameter an operand of any type in a derivation class. For record and private types, the derivatives may be extensions of the parent type. Types that support these object-oriented capabilities of class-wide operations and type extension must be tagged, so that the specific type of an operand within a derivation class can be identified at run time. When an operation of a tagged type is applied to an operand whose specific type is not known until run time, implicit dispatching is performed based on the tag of the operand. 38.1/2 Interface types provide abstract models from which other interfaces and types may be composed and derived. This provides a reliable form of multiple inheritance. Interface types may also be implemented by task types and protected types thereby enabling concurrent programming and inheritance to be merged. 39 The concept of a type is further refined by the concept of a subtype, whereby a user can constrain the set of allowed values of a type. Subtypes can be used to define subranges of scalar types, arrays with a limited set of index values, and records and private types with particular discriminant values. 40 Other Facilities 41/2 Aspect clauses can be used to specify the mapping between types and features of an underlying machine. For example, the user can specify that objects of a given type must be represented with a given number of bits, or that the components of a record are to be represented using a given storage layout. Other features allow the controlled use of low level, nonportable, or implementation-dependent aspects, including the direct insertion of machine code. 42/2 The predefined environment of the language provides for input-output and other capabilities by means of standard library packages. Input-output is supported for values of user-defined as well as of predefined types. Standard means of representing values in display form are also provided. Introduction 13 December 2012 xiv Ada Reference Manual — 2012 Edition The predefined standard library packages provide facilities such as string manipulation, containers of various kinds (vectors, lists, maps, etc.), mathematical functions, random number generation, and access to the execution environment. The specialized annexes define further predefined library packages and facilities with emphasis on areas such as real-time scheduling, interrupt handling, distributed systems, numerical computation, and high- integrity systems. Finally, the language provides a powerful means of parameterization of program units, called generic program units. The generic parameters can be types and subprograms (as well as objects and packages) and so allow general algorithms and data structures to be defined that are applicable to all types of a given class. Language Changes Paragraphs 44 through 57 have been removed as they described differences from the first edition of Ada (Ada 83). This International Standard replaces the second edition of 1995. It modifies the previous edition by making changes and additions that improve the capability of the language and the reliability of programs written in the language. This edition incorporates the changes from Amendment 1 (ISO/IEC 8652:1995:AMD 1:2007), which were designed to improve the portability of programs, interfacing to other languages, and both the object-oriented and real-time capabilities. Significant changes originating in Amendment 1 are incorporated: • Support for program text is extended to cover the entire ISO/IEC 10646:2003 repertoire. Execution support now includes the 32-bit character set. See subclauses 2.1, 3.5.2, 3.6.3, A.1, A.3, and A.4. • The object-oriented model has been improved by the addition of an interface facility which provides multiple inheritance and additional flexibility for type extensions. See subclauses 3.4, 3.9, and 7.3. An alternative notation for calling operations more akin to that used in other languages has also been added. See subclause 4.1.3. • Access types have been further extended to unify properties such as the ability to access constants and to exclude null values. See clause 3.10. Anonymous access types are now permitted more freely and anonymous access-to-subprogram types are introduced. See subclauses 3.3, 3.6, 3.10, and 8.5.1. • The control of structure and visibility has been enhanced to permit mutually dependent references between units and finer control over access from the private part of a package. See subclauses 3.10.1 and 10.1.2. In addition, limited types have been made more useful by the provision of aggregates, constants, and constructor functions. See subclauses 4.3, 6.5, and 7.5. • The predefined environment has been extended to include additional time and calendar operations, improved string handling, a comprehensive container library, file and directory management, and access to environment variables. See subclauses 9.6.1, A.4, A.16, A.17, and A.18. • Two of the Specialized Needs Annexes have been considerably enhanced: • The Real-Time Systems Annex now includes the Ravenscar profile for high-integrity systems, further dispatching policies such as Round Robin and Earliest Deadline First, support for timing events, and support for control of CPU time utilization. See subclauses D.2, D.13, D.14, and D.15. 42.1/2 42.2/2 43 57.1/3 57.2/3 57.3/3 57.4/3 57.5/3 57.6/3 57.7/3 57.8/3 57.9/2 xv 13 December 2012 Introduction Ada Reference Manual — 2012 Edition 57.10/3 57.11/3 57.12/3 • The Numerics Annex now includes support for real and complex vectors and matrices as previously defined in ISO/IEC 13813:1997 plus further basic operations for linear algebra. See subclause G.3. • The overall reliability of the language has been enhanced by a number of improvements. These include new syntax which detects accidental overloading, as well as pragmas for making assertions and giving better control over the suppression of checks. See subclauses 6.1, 11.4.2, and 11.5. In addition, this third edition makes enhancements to address two important issues, namely, the particular problems of multiprocessor architectures, and the need to further increase the capabilities regarding assertions for correctness. It also makes additional changes and additions that improve the capability of the language and the reliability of programs written in the language. 57.13/3 The following significant changes with respect to the 1995 edition as amended by Amendment 1 are incorporated: 57.14/3 • New syntax (the aspect specification) is introduced to enable properties to be specified for various entities in a more structured manner than through pragmas. See subclause 13.1.1. 57.15/3 57.16/3 57.17/3 57.18/3 57.19/3 57.20/3 • The concept of assertions introduced in the 2005 edition is extended with the ability to specify preconditions and postconditions for subprograms, and invariants for private types. The concept of constraints in defining subtypes is supplemented with subtype predicates that enable subsets to be specified other than as simple ranges. These properties are all indicated using aspect specifications. See subclauses 3.2.4, 6.1.1, and 7.3.2. • New forms of expressions are introduced. These are if expressions, case expressions, quantified expressions, and expression functions. As well as being useful for programming in general by avoiding the introduction of unnecessary assignments, they are especially valuable in conditions and invariants since they avoid the need to introduce auxiliary functions. See subclauses 4.5.7, 4.5.8, and 6.8. Membership tests are also made more flexible. See subclauses 4.4 and 4.5.2. • A number of changes are made to subprogram parameters. Functions may now have parameters of all modes. In order to mitigate consequent (and indeed existing) problems of inadvertent order dependence, rules are introduced to reduce aliasing. A parameter may now be explicitly marked as aliased and the type of a parameter may be incomplete in certain circumstances. See subclauses 3.10.1, 6.1, and 6.4.1. • The use of access types is now more flexible. The rules for accessibility and certain conversions are improved. See subclauses 3.10.2, 4.5.2, 4.6, and 8.6. Furthermore, better control of storage pools is provided. See subclause 13.11.4. • The Real-Time Systems Annex now includes facilities for defining domains of processors and assigning tasks to them. Improvements are made to scheduling and budgeting facilities. See subclauses D.10.1, D.14, and D.16. • A number of important improvements are made to the standard library. These include packages for conversions between strings and UTF encodings, and classification functions for wide and wide wide characters. Internationalization is catered for by a package giving locale information. See subclauses A.3, A.4.11, and A.19. The container library is extended to include bounded forms of the existing containers and new containers for indefinite objects, multiway trees, and queues. See subclause A.18. 57.21/3 • Finally, certain features are added primarily to ease the use of containers, such as the ability to iterate over all elements in a container without having to encode the iteration. These can also be used for iteration over arrays, and within quantified expressions. See subclauses 4.1.5, 4.1.6, 5.5.1, and 5.5.2. Introduction 13 December 2012 xvi Ada Reference Manual — 2012 Edition Instructions for Comment Submission Informal comments on this International Standard may be sent via e-mail to ada-comment@ada- auth.org. If appropriate, the Project Editor will initiate the defect correction procedure. Comments should use the following format: !topic Title summarizing comment !reference Ada 2012 RMss.ss(pp) !from Author Name yy-mm-dd !keywords keywords related to topic !discussion text of discussion where ss.ss is the clause or subclause number, pp is the paragraph number where applicable, and yy-mm-dd is the date the comment was sent. The date is optional, as is the !keywords line. Please use a descriptive “Subject” in your e-mail message, and limit each message to a single comment. When correcting typographical errors or making minor wording suggestions, please put the correction directly as the topic of the comment; use square brackets [ ] to indicate text to be omitted and curly braces { } to indicate text to be added, and provide enough context to make the nature of the suggestion self- evident or put additional information in the body of the comment, for example: !topic [c]{C}haracter !topic it[']s meaning is not defined Formal requests for interpretations and for reporting defects in this International Standard may be made in accordance with the ISO/IEC JTC 1 Directives and the ISO/IEC JTC 1/SC 22 policy for interpretations. National Bodies may submit a Defect Report to ISO/IEC JTC 1/SC 22 for resolution under the JTC 1 procedures. A response will be provided and, if appropriate, a Technical Corrigendum will be issued in accordance with the procedures. 58/1 59 60/3 61/3 62/1 63 64 65 xvii 13 December 2012 Introduction Ada Reference Manual — 2012 Edition Acknowledgements for the Ada 83 edition 65.1/3 Ada is the result of a collective effort to design a common language for programming large scale and real- time systems. 65.2/3 65.3/3 65.4/3 65.5/3 65.6/3 65.7/3 65.8/3 65.9/3 The common high order language program began in 1974. The requirements of the United States Department of Defense were formalized in a series of documents which were extensively reviewed by the Services, industrial organizations, universities, and foreign military departments. The Ada language was designed in accordance with the final (1978) form of these requirements, embodied in the Steelman specification. The Ada design team was led by Jean D. Ichbiah and has included Bernd Krieg-Brueckner, Brian A. Wichmann, Henry F. Ledgard, Jean-Claude Heliard, Jean-Loup Gailly, Jean-Raymond Abrial, John G.P. Barnes, Mike Woodger, Olivier Roubine, Paul N. Hilfinger, and Robert Firth. At various stages of the project, several people closely associated with the design team made major contributions. They include J.B. Goodenough, R.F. Brender, M.W. Davis, G. Ferran, K. Lester, L. MacLaren, E. Morel, I.R. Nassi, I.C. Pyle, S.A. Schuman, and S.C. Vestal. Two parallel efforts that were started in the second phase of this design had a deep influence on the language. One was the development of a formal definition using denotational semantics, with the participation of V. Donzeau-Gouge, G. Kahn, and B. Lang. The other was the design of a test translator with the participation of K. Ripken, P. Boullier, P. Cadiou, J. Holden, J.F. Hueras, R.G. Lange, and D.T. Cornhill. The entire effort benefitted from the dedicated assistance of Lyn Churchill and Marion Myers, and the effective technical support of B. Gravem, W.L. Heimerdinger, and P. Cleve. H.G. Schmitz served as program manager. Over the five years spent on this project, several intense week-long design reviews were conducted, with the participation of P. Belmont, B. Brosgol, P. Cohen, R. Dewar, A. Evans, G. Fisher, H. Harte, A.L. Hisgen, P. Knueven, M. Kronental, N. Lomuto, E. Ploedereder, G. Seegmueller, V. Stenning, D. Taffs, and also F. Belz, R. Converse, K. Correll, A.N. Habermann, J. Sammet, S. Squires, J. Teller, P. Wegner, and P.R. Wetherall. Several persons had a constructive influence with their comments, criticisms and suggestions. They include P. Brinch Hansen, G. Goos, C.A.R. Hoare, Mark Rain, W.A. Wulf, and also E. Boebert, P. Bonnard, H. Clausen, M. Cox, G. Dismukes, R. Eachus, T. Froggatt, H. Ganzinger, C. Hewitt, S. Kamin, R. Kotler, O. Lecarme, J.A.N. Lee, J.L. Mansion, F. Minel, T. Phinney, J. Roehrich, V. Schneider, A. Singer, D. Slosberg, I.C. Wand, the reviewers of Ada-Europe, AdaTech, Afcet, those of the LMSC review team, and those of the Ada Tokyo Study Group. These reviews and comments, the numerous evaluation reports received at the end of the first and second phase, the nine hundred language issue reports and test and evaluation reports received from fifteen different countries during the third phase of the project, the thousands of comments received during the ANSI Canvass, and the on-going work of the IFIP Working Group 2.4 on system implementation languages and that of the Purdue Europe LTPL-E committee, all had a substantial influence on the final definition of Ada. The Military Departments and Agencies have provided a broad base of support including funding, extensive reviews, and countless individual contributions by the members of the High Order Language Working Group and other interested personnel. In particular, William A. Whitaker provided leadership for the program during the formative stages. David A. Fisher was responsible for the successful development and refinement of the language requirement documents that led to the Steelman specification. Introduction 13 December 2012 xviii Ada Reference Manual — 2012 Edition The Ada 83 language definition was developed by Cii Honeywell Bull and later Alsys, and by Honeywell Systems and Research Center, under contract to the United States Department of Defense. William E. Carlson and later Larry E. Druffel served as the technical representatives of the United States Government and effectively coordinated the efforts of all participants in the Ada program. 65.10/3 Acknowledgements for the Ada 95 edition This International Standard was prepared by the Ada 9X Mapping/Revision Team based at Intermetrics, Inc., which has included: W. Carlson, Program Manager; T. Taft, Technical Director; J. Barnes (consultant); B. Brosgol (consultant); R. Duff (Oak Tree Software); M. Edwards; C. Garrity; R. Hilliard; O. Pazy (consultant); D. Rosenfeld; L. Shafer; W. White; M. Woodger. The following consultants to the Ada 9X Project contributed to the Specialized Needs Annexes: T. Baker (Real-Time/Systems Programming — SEI, FSU); K. Dritz (Numerics — Argonne National Laboratory); A. Gargaro (Distributed Systems — Computer Sciences); J. Goodenough (Real-Time/Systems Programming — SEI); J. McHugh (Secure Systems — consultant); B. Wichmann (Safety-Critical Systems — NPL: UK). This work was regularly reviewed by the Ada 9X Distinguished Reviewers and the members of the Ada 9X Rapporteur Group (XRG): E. Ploedereder, Chairman of DRs and XRG (University of Stuttgart: Germany); B. Bardin (Hughes); J. Barnes (consultant: UK); B. Brett (DEC); B. Brosgol (consultant); R. Brukardt (RR Software); N. Cohen (IBM); R. Dewar (NYU); G. Dismukes (TeleSoft); A. Evans (consultant); A. Gargaro (Computer Sciences); M. Gerhardt (ESL); J. Goodenough (SEI); S. Heilbrunner (University of Salzburg: Austria); P. Hilfinger (UC/Berkeley); B. Källberg (CelsiusTech: Sweden); M. Kamrad II (Unisys); J. van Katwijk (Delft University of Technology: The Netherlands); V. Kaufman (Russia); P. Kruchten (Rational); R. Landwehr (CCI: Germany); C. Lester (Portsmouth Polytechnic: UK); L. Månsson (TELIA Research: Sweden); S. Michell (Multiprocessor Toolsmiths: Canada); M. Mills (US Air Force); D. Pogge (US Navy); K. Power (Boeing); O. Roubine (Verdix: France); A. Strohmeier (Swiss Fed Inst of Technology: Switzerland); W. Taylor (consultant: UK); J. Tokar (Tartan); E. Vasilescu (Grumman); J. Vladik (Prospeks s.r.o.: Czech Republic); S. Van Vlierberghe (OFFIS: Belgium). Other valuable feedback influencing the revision process was provided by the Ada 9X Language Precision Team (Odyssey Research Associates), the Ada 9X User/Implementer Teams (AETECH, Tartan, TeleSoft), the Ada 9X Implementation Analysis Team (New York University) and the Ada community-at-large. Special thanks go to R. Mathis, Convenor of ISO/IEC JTC 1/SC 22 Working Group 9. The Ada 9X Project was sponsored by the Ada Joint Program Office. Christine M. Anderson at the Air Force Phillips Laboratory (Kirtland AFB, NM) was the project manager. 66 67 68 69 70 71 Acknowledgements for the Corrigendum version The editor [R. Brukardt (USA)] would like to thank the many people whose hard work and assistance has made this update possible. 71.1/3 Thanks go out to all of the members of the ISO/IEC JTC 1/SC 22/WG 9 Ada Rapporteur Group, whose work on creating and editing the wording corrections was critical to the entire process. Especially valuable contributions came from the chairman of the ARG, E. Ploedereder (Germany), who kept the process moving; J. Barnes (UK) and K. Ishihata (Japan), whose extremely detailed reviews kept the editor on his toes; G. Dismukes (USA), M. Kamrad (USA), P. Leroy (France), S. Michell (Canada), T. Taft (USA), J. Tokar (USA), and other members too numerous to mention. 71.2/1 xix 13 December 2012 Introduction Ada Reference Manual — 2012 Edition 71.3/1 Special thanks go to R. Duff (USA) for his explanations of the previous system of formatting of these documents during the tedious conversion to more modern formats. Special thanks also go to the convenor of ISO/IEC JTC 1/SC 22/WG 9, J. Moore (USA), without whose help and support the Corrigendum and this consolidated reference manual would not have been possible. Acknowledgements for the Amendment 1 version 71.4/3 The editor [R. Brukardt (USA)] would like to thank the many people whose hard work and assistance has made this update possible. 71.5/2 Thanks go out to all of the members of the ISO/IEC JTC 1/SC 22/WG 9 Ada Rapporteur Group, whose work on creating and editing the wording corrections was critical to the entire process. Especially valuable contributions came from the chairman of the ARG, P. Leroy (France), who kept the process on schedule; J. Barnes (UK) whose careful reviews found many typographical errors; T. Taft (USA), who always seemed to have a suggestion when we were stuck, and who also was usually able to provide the valuable service of explaining why things were as they are; S. Baird (USA), who found many obscure problems with the proposals; and A. Burns (UK), who pushed many of the real-time proposals to completion. Other ARG members who contributed were: R. Dewar (USA), G. Dismukes (USA), R. Duff (USA), K. Ishihata (Japan), S. Michell (Canada), E. Ploedereder (Germany), J.P. Rosen (France), E. Schonberg (USA), J. Tokar (USA), and T. Vardanega (Italy). 71.6/2 Special thanks go to Ada-Europe and the Ada Resource Association, without whose help and support the Amendment and this consolidated reference manual would not have been possible. M. Heaney (USA) requires special thanks for his tireless work on the containers packages. Finally, special thanks go to the convenor of ISO/IEC JTC 1/SC 22/WG 9, J. Moore (USA), who guided the document through the standardization process. Acknowledgements for the Ada 2012 edition 71.7/3 The editor [R. Brukardt (USA)] would like to thank the many people whose hard work and assistance has made this revision possible. 71.8/3 Thanks go out to all of the members of the ISO/IEC JTC 1/SC 22/WG 9 Ada Rapporteur Group, whose work on creating and editing the wording changes was critical to the entire process. Especially valuable contributions came from the chairman of the ARG, E. Schonberg (USA), who guided the work; T. Taft (USA), whose insights broke many logjams, both in design and wording; J. Barnes (UK) whose careful reviews uncovered many editorial errors; S. Baird (USA), who repeatedly found obscure interactions with the proposals that the rest of us missed. Other ARG members who substantially contributed were: A. Burns (UK), J. Cousins (UK), R. Dewar (USA), G. Dismukes (USA), R. Duff (USA), P. Leroy (France), B. Moore (Canada), E. Ploedereder (Germany), J.P. Rosen (France), B. Thomas (USA), and T. Vardanega (Italy). 71.9/3 Special thanks go to Ada-Europe and the Ada Resource Association, without whose help and support this third edition of the Ada Standard would not have been possible. A special mention has to go to A. Beneschan (USA) for his efforts in eliminating sloppiness in our wording. M. Heaney (USA) also deserves a mention for his efforts to improve the containers packages. Finally, special thanks go to the convenor of ISO/IEC JTC 1/SC 22/WG 9, J. Tokar (USA), who guided the document through the standardization process. Introduction 13 December 2012 xx Ada Reference Manual — 2012 Edition Changes The International Standard is the same as this version of the Reference Manual, except: • This list of Changes is not included in the International Standard. • The “Acknowledgements” page is not included in the International Standard. • The text in the running headers and footers on each page is slightly different in the International Standard. • The title page(s) are different in the International Standard. • This document is formatted for 8.5-by-11-inch paper, whereas the International Standard is formatted for A4 paper (210-by-297mm); thus, the page breaks are in different places. • This paragraph was deleted. • The “Using this version of the Ada Reference Manual” subclause is not included in the International Standard. • Paragraph numbers are not included in the International Standard. Using this version of the Ada Reference Manual This document has been revised with the corrections specified in Technical Corrigendum 1 (ISO/IEC 8652:1995/COR.1:2001) and Amendment 1 (ISO/IEC 8652/AMD 1:2007), along with changes specifically for this third edition. In addition, a variety of editorial errors have been corrected. Changes to the original 8652:1995 can be identified by the version number following the paragraph number. Paragraphs with a version number of /1 were changed by Technical Corrigendum 1 or were editorial corrections at that time, while paragraphs with a version number of /2 were changed by Amendment 1 or were more recent editorial corrections, and paragraphs with a version number of /3 were changed by the third (2012) edition of the Standard or were still more recent editorial corrections. Paragraphs not so marked are unchanged by the third edition, Amendment 1, Technical Corrigendum 1, or editorial corrections. Paragraph numbers of unchanged paragraphs are the same as in the 1995 edition of the Ada Reference Manual. In addition, some versions of this document include revision bars near the paragraph numbers. Where paragraphs are inserted, the paragraph numbers are of the form pp.nn, where pp is the number of the preceding paragraph, and nn is an insertion number. For instance, the first paragraph inserted after paragraph 8 is numbered 8.1, the second paragraph inserted is numbered 8.2, and so on. Deleted paragraphs are indicated by the text This paragraph was deleted. Deleted paragraphs include empty paragraphs that were numbered in the 1995 edition of the Ada Reference Manual. 72 73 74 75 76 77 77.1/3 77.2/3 77.3/3 77.4/3 77.5/3 xxi 13 December 2012 Introduction Ada Reference Manual — 2012 Edition 1 General 1.1 Scope This International Standard specifies the form and meaning of programs written in Ada. Its purpose is to promote the portability of Ada programs to a variety of computing systems. Ada is a programming language designed to support the construction of long-lived, highly reliable software systems. The language includes facilities to define packages of related types, objects, and operations. The packages may be parameterized and the types may be extended to support the construction of libraries of reusable, adaptable software components. The operations may be implemented as subprograms using conventional sequential control structures, or as entries that include synchronization of concurrent threads of control as part of their invocation. Ada supports object-oriented programming by providing classes and interfaces, inheritance, polymorphism of variables and methods, and generic units. The language treats modularity in the physical sense as well, with a facility to support separate compilation. The language provides rich support for real-time, concurrent programming, and includes facilities for multicore and multiprocessor programming. Errors can be signaled as exceptions and handled explicitly. The language also covers systems programming; this requires precise control over the representation of data and access to system-dependent properties. Finally, a predefined environment of standard packages is provided, including facilities for, among others, input-output, string manipulation, numeric elementary functions, and random number generation, and definition and use of containers. 1.1.1 Extent This International Standard specifies: • The form of a program written in Ada; • The effect of translating and executing such a program; • The manner in which program units may be combined to form Ada programs; • The language-defined library units that a conforming implementation is required to supply; • The permissible variations within the standard, and the manner in which they are to be documented; • Those violations of the standard that a conforming implementation is required to detect, and the effect of attempting to translate or execute a program containing such violations; • Those violations of the standard that a conforming implementation is not required to detect. This International Standard does not specify: • The means whereby a program written in Ada is transformed into object code executable by a processor; • The means whereby translation or execution of programs is invoked and the executing units are controlled; 1/3 2/3 3/3 1 2 3 4 5 6 7 8 9 10 11 1 13 December 2012 1 General Ada Reference Manual — 2012 Edition • The size or speed of the object code, or the relative execution speed of different language constructs; • The form or contents of any listings produced by implementations; in particular, the form or contents of error or warning messages; • The effect of unspecified execution. • The size of a program or program unit that will exceed the capacity of a particular conforming implementation. 1.1.2 Structure This International Standard contains thirteen clauses, fifteen annexes, and an index. The core of the Ada language consists of: • Clauses 1 through 13 • Annex A, “Predefined Language Environment” • Annex B, “Interface to Other Languages” • Annex J, “Obsolescent Features” The following Specialized Needs Annexes define features that are needed by certain application areas: • Annex C, “Systems Programming” • Annex D, “Real-Time Systems” • Annex E, “Distributed Systems” • Annex F, “Information Systems” • Annex G, “Numerics” • Annex H, “High Integrity Systems” The core language and the Specialized Needs Annexes are normative, except that the material in each of the items listed below is informative: • Text under a NOTES or Examples heading. • Each subclause whose title starts with the word “Example” or “Examples”. All implementations shall conform to the core language. In addition, an implementation may conform separately to one or more Specialized Needs Annexes. The following Annexes are informative: • Annex K, “Language-Defined Aspects and Attributes” • Annex L, “Language-Defined Pragmas” • Annex M, “Summary of Documentation Requirements” • Annex N, “Glossary” • Annex P, “Syntax Summary” • Annex Q, “Language-Defined Entities” 12 13 14 15 1/3 2 3/3 4 5 6 7 8 9 10 11 12 13 14 15 16/3 17 18 19 20 21/3 22 23 23.1/3 1.1.1 Extent 13 December 2012 2 Each section is divided into subclauses that have a common structure. Each clause and subclause first introduces its subject. After the introductory text, text is labeled with the following headings: 24/3 Ada Reference Manual — 2012 Edition Syntax rules (indented). Syntax Name Resolution Rules Compile-time rules that are used in name resolution, including overload resolution. Rules that are enforced at compile time. A construct is legal if it obeys all of the Legality Rules. Legality Rules A definition of the compile-time effect of each construct. Static Semantics Post-Compilation Rules Rules that are enforced before running a partition. A partition is legal if its compilation units are legal and it obeys all of the Post-Compilation Rules. A definition of the run-time effect of each construct. Dynamic Semantics Situations that result in bounded (run-time) errors (see 1.1.5). Bounded (Run-Time) Errors Situations that result in erroneous execution (see 1.1.5). Erroneous Execution Additional requirements for conforming implementations. Implementation Requirements Documentation requirements for conforming implementations. Documentation Requirements Metrics that are specified for the time/space properties of the execution of certain language constructs. Metrics Additional permissions given to the implementer. Implementation Permissions Implementation Advice Optional advice given to the implementer. The word “should” is used to indicate that the advice is a recommendation, not a requirement. It is implementation defined whether or not a given recommendation is obeyed. NOTES 1 Notes emphasize consequences of the rules described in the (sub)clause or elsewhere. This material is informative. Examples illustrate the possible forms of the constructs described. This material is informative. Examples 3 13 December 2012 Structure 1.1.2 25 26/3 27 28 29 30 31 32 33 34 35 36 37 38 39 Ada Reference Manual — 2012 Edition 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1.1.3 Conformity of an Implementation with the Standard A conforming implementation shall: Implementation Requirements • Translate and correctly execute legal programs written in Ada, provided that they are not so large as to exceed the capacity of the implementation; • Identify all programs or program units that are so large as to exceed the capacity of the implementation (or raise an appropriate exception at run time); • Identify all programs or program units that contain errors whose detection is required by this International Standard; • Supply all language-defined library units required by this International Standard; • Contain no variations except those explicitly permitted by this International Standard, or those that are impossible or impractical to avoid given the implementation's execution environment; • Specify all such variations in the manner prescribed by this International Standard. The external effect of the execution of an Ada program is defined in terms of its interactions with its external environment. The following are defined as external interactions: • Any interaction with an external file (see A.7); • The execution of certain code_statements (see 13.8); which code_statements cause external interactions is implementation defined. • Any call on an imported subprogram (see Annex B), including any parameters passed to it; • Any result returned or exception propagated from a main subprogram (see 10.2) or an exported subprogram (see Annex B) to an external caller; • Any read or update of an atomic or volatile object (see C.6); • The values of imported and exported objects (see Annex B) at the time of any other interaction with the external environment. A conforming implementation of this International Standard shall produce for the execution of a given Ada program a set of interactions with the external environment whose order and timing are consistent with the definitions and requirements of this International Standard for the semantics of the given program. An implementation that conforms to this Standard shall support each capability required by the core language as specified. In addition, an implementation that conforms to this Standard may conform to one or more Specialized Needs Annexes (or to none). Conformance to a Specialized Needs Annex means that each capability required by the Annex is provided as specified. 17/3 An implementation conforming to this International Standard may provide additional aspects, attributes, library units, and pragmas. However, it shall not provide any aspect, attribute, library unit, or pragma having the same name as an aspect, attribute, library unit, or pragma (respectively) specified in a Specialized Needs Annex unless the provided construct is either as specified in the Specialized Needs Annex or is more limited in capability than that required by the Annex. A program that attempts to use an unsupported capability of an Annex shall either be identified by the implementation before run time or shall raise an exception at run time. 1.1.3 Conformity of an Implementation with the Standard 13 December 2012 4 Ada Reference Manual — 2012 Edition Documentation Requirements Certain aspects of the semantics are defined to be either implementation defined or unspecified. In such cases, the set of possible effects is specified, and the implementation may choose any effect in the set. Implementations shall document their behavior in implementation-defined situations, but documentation is not required for unspecified situations. The implementation-defined characteristics are summarized in M.2. The implementation may choose to document implementation-defined behavior either by documenting what happens in general, or by providing some mechanism for the user to determine what happens in a particular case. Implementation Advice If an implementation detects the use of an unsupported Specialized Needs Annex feature at run time, it should raise Program_Error if feasible. If an implementation wishes to provide implementation-defined extensions to the functionality of a language-defined library unit, it should normally do so by adding children to the library unit. NOTES 2 The above requirements imply that an implementation conforming to this Standard may support some of the capabilities required by a Specialized Needs Annex without supporting all required capabilities. 1.1.4 Method of Description and Syntax Notation The form of an Ada program is described by means of a context-free syntax together with context- dependent requirements expressed by narrative rules. The meaning of Ada programs is described by means of narrative rules defining both the effects of each construct and the composition rules for constructs. The context-free syntax of the language is described using a simple variant of Backus-Naur Form. In particular: • Lower case words in a sans-serif font, some containing embedded underlines, are used to denote syntactic categories, for example: case_statement • Boldface words are used to denote reserved words, for example: array • Square brackets enclose optional items. Thus the two following rules are equivalent. simple_return_statement ::= return [expression]; simple_return_statement ::= return; | return expression; • Curly brackets enclose a repeated item. The item may appear zero or more times; the repetitions occur from left to right as with an equivalent left-recursive rule. Thus the two following rules are equivalent. term ::= factor {multiplying_operator factor} term ::= factor | term multiplying_operator factor • A vertical line separates alternative items unless it occurs immediately after an opening curly bracket, in which case it stands for itself: constraint ::= scalar_constraint | composite_constraint discrete_choice_list ::= discrete_choice {| discrete_choice} 18 19 20 21 22 1 2 3 4 5 6 7 8 9/2 10 11 12 13 5 13 December 2012 Conformity of an Implementation with the Standard 1.1.3 Ada Reference Manual — 2012 Edition 14 14.1/3 • If the name of any syntactic category starts with an italicized part, it is equivalent to the category name without the italicized part. The italicized part is intended to convey some semantic information. For example subtype_name and task_name are both equivalent to name alone. The delimiters, compound delimiters, reserved words, and numeric_literals are exclusively made of the characters whose code point is between 16#20# and 16#7E#, inclusively. The special characters for which names are defined in this International Standard (see 2.1) belong to the same range. For example, the character E in the definition of exponent is the character whose name is “LATIN CAPITAL LETTER E”, not “GREEK CAPITAL LETTER EPSILON”. 14.2/3 When this International Standard mentions the conversion of some character or sequence of characters to upper case, it means the character or sequence of characters obtained by using simple upper case mapping, as defined by documents referenced in the note in Clause 1 of ISO/IEC 10646:2011. 15 16 17 18 19 20 21 1 2 3 A syntactic category is a nonterminal in the grammar defined in BNF under “Syntax.” Names of syntactic categories are set in a different font, like_this. A construct is a piece of text (explicit or implicit) that is an instance of a syntactic category defined under “Syntax”. A constituent of a construct is the construct itself, or any construct appearing within it. Whenever the run-time semantics defines certain actions to happen in an arbitrary order, this means that the implementation shall arrange for these actions to occur in a way that is equivalent to some sequential order, following the rules that result from that sequential order. When evaluations are defined to happen in an arbitrary order, with conversion of the results to some subtypes, or with some run-time checks, the evaluations, conversions, and checks may be arbitrarily interspersed, so long as each expression is evaluated before converting or checking its value. Note that the effect of a program can depend on the order chosen by the implementation. This can happen, for example, if two actual parameters of a given call have side effects. NOTES 3 The syntax rules describing structured constructs are presented in a form that corresponds to the recommended paragraphing. For example, an if_statement is defined as: if_statement ::= if condition then sequence_of_statements {elsif condition then sequence_of_statements} [else sequence_of_statements] end if; 4 The line breaks and indentation in the syntax rules indicate the recommended line breaks and indentation in the corresponding constructs. The preferred places for other line breaks are after semicolons. 1.1.5 Classification of Errors Implementation Requirements The language definition classifies errors into several different categories: • Errors that are required to be detected prior to run time by every Ada implementation; These errors correspond to any violation of a rule given in this International Standard, other than those listed below. In particular, violation of any rule that uses the terms shall, allowed, permitted, legal, or illegal belongs to this category. Any program that contains such an error is 1.1.4 Method of Description and Syntax Notation 13 December 2012 6 Ada Reference Manual — 2012 Edition not a legal Ada program; on the other hand, the fact that a program is legal does not mean, per se, that the program is free from other forms of error. The rules are further classified as either compile time rules, or post compilation rules, depending on whether a violation has to be detected at the time a compilation unit is submitted to the compiler, or may be postponed until the time a compilation unit is incorporated into a partition of a program. • Errors that are required to be detected at run time by the execution of an Ada program; The corresponding error situations are associated with the names of the predefined exceptions. Every Ada compiler is required to generate code that raises the corresponding exception if such an error situation arises during program execution. If such an error situation is certain to arise in every execution of a construct, then an implementation is allowed (although not required) to report this fact at compilation time. • Bounded errors; The language rules define certain kinds of errors that need not be detected either prior to or during run time, but if not detected, the range of possible effects shall be bounded. The errors of this category are called bounded errors. The possible effects of a given bounded error are specified for each such error, but in any case one possible effect of a bounded error is the raising of the exception Program_Error. • Erroneous execution. In addition to bounded errors, the language rules define certain kinds of errors as leading to erroneous execution. Like bounded errors, the implementation need not detect such errors either prior to or during run time. Unlike bounded errors, there is no language-specified bound on the possible effect of erroneous execution; the effect is in general not predictable. Implementation Permissions An implementation may provide nonstandard modes of operation. Typically these modes would be selected by a pragma or by a command line switch when the compiler is invoked. When operating in a nonstandard mode, the implementation may reject compilation_units that do not conform to additional requirements associated with the mode, such as an excessive number of warnings or violation of coding style guidelines. Similarly, in a nonstandard mode, the implementation may apply special optimizations or alternative algorithms that are only meaningful for programs that satisfy certain criteria specified by the implementation. In any case, an implementation shall support a standard mode that conforms to the requirements of this International Standard; in particular, in the standard mode, all legal compilation_units shall be accepted. 4 5 6 7 8 9 10 11 If an implementation detects a bounded error or erroneous execution, it should raise Program_Error. 12 Implementation Advice 1.2 Normative References The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. 1/3 ISO 639-3:2007, Codes for the representation of names of languages — Part 3: Alpha-3 code for comprehensive coverage of languages. 1.1/3 ISO/IEC 646:1991, Information technology — ISO 7-bit coded character set for information interchange. 2 7 13 December 2012 Classification of Errors 1.1.5 Ada Reference Manual — 2012 Edition 3/2 ISO/IEC 1539-1:2004, Information technology — Programming languages — Fortran — Part 1: Base language. 4/2 ISO/IEC 1989:2002, Information technology — Programming languages — COBOL. 4.1/3 ISO/IEC 3166-1:2006, Codes for the representation of names of countries and their subdivisions — Part 1: Country Codes. 5 ISO/IEC 6429:1992, Information technology — Control functions for coded graphic character sets. 5.1/2 ISO 8601:2004, Data elements and interchange formats — Information interchange — Representation of dates and times. 6/3 7/3 8/3 9/3 10/2 1/2 ISO/IEC 8859-1:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 1: Latin alphabet No. 1. ISO/IEC 9899:2011, Information technology — Programming languages — C. ISO/IEC 10646:2011, Information technology — Universal Multiple-Octet Coded Character Set (UCS). ISO/IEC 14882:2011, Information technology — Programming languages — C++. ISO/IEC TR 19769:2004, Information technology — Programming languages, their environments and system software interfaces — Extensions for the programming language C to support new character data types. 1.3 Terms and Definitions Terms are defined throughout this International Standard, indicated by italic type. Terms explicitly defined in this International Standard are not to be presumed to refer implicitly to similar terms defined elsewhere. Mathematical terms not defined in this International Standard are to be interpreted according to the CRC Concise Encyclopedia of Mathematics, Second Edition. Other terms not defined in this International Standard are to be interpreted according to the Webster's Third New International Dictionary of the English Language. Informal descriptions of some terms are also given in Annex N, “Glossary”. 1.2 Normative References 13 December 2012 8 Ada Reference Manual — 2012 Edition 2 Lexical Elements The text of a program consists of the texts of one or more compilations. The text of a compilation is a sequence of lexical elements, each composed of characters; the rules of composition are given in this clause. Pragmas, which provide certain information for the compiler, are also described in this clause. 1/3 2.1 Character Set The character repertoire for the text of an Ada program consists of the entire coding space described by the ISO/IEC 10646:2011 Universal Multiple-Octet Coded Character Set. This coding space is organized in planes, each plane comprising 65536 characters. 1/3 Paragraphs 2 and 3 were deleted. Syntax A character is defined by this International Standard for each cell in the coding space described by ISO/IEC 10646:2011, regardless of whether or not ISO/IEC 10646:2011 allocates a character to that cell. Static Semantics The coded representation for characters is implementation defined (it need not be a representation defined within ISO/IEC 10646:2011). A character whose relative code point in its plane is 16#FFFE# or 16#FFFF# is not allowed anywhere in the text of a program. The only characters allowed outside of comments are those in categories other_format, format_effector, and graphic_character. The semantics of an Ada program whose text is not in Normalization Form KC (as defined by Clause 21 of ISO/IEC 10646:2011) is implementation defined. The description of the language definition in this International Standard uses the character properties General Category, Simple Uppercase Mapping, Uppercase Mapping, and Special Case Condition of the documents referenced by the note in Clause 1 of ISO/IEC 10646:2011. The actual set of graphic symbols used by an implementation for the visual representation of the text of an Ada program is not specified. Characters are categorized as follows: This paragraph was deleted. letter_uppercase Any character whose General Category is defined to be “Letter, Uppercase”. letter_lowercase Any character whose General Category is defined to be “Letter, Lowercase”. letter_titlecase Any character whose General Category is defined to be “Letter, Titlecase”. letter_modifier Any character whose General Category is defined to be “Letter, Modifier”. letter_other Any character whose General Category is defined to be “Letter, Other”. mark_non_spacing Any character whose General Category is defined to be “Mark, Non-Spacing”. mark_spacing_combining Any character whose General Category is defined to be “Mark, Spacing Combining”. 3.1/3 4/3 4.1/3 5/3 6/3 7/2 8/2 9/2 9.1/2 9.2/2 9.3/2 9.4/2 9.5/2 9 13 December 2012 Lexical Elements 2 Ada Reference Manual — 2012 Edition 10/2 number_decimal Any character whose General Category is defined to be “Number, Decimal”. 10.1/2 number_letter Any character whose General Category is defined to be “Number, Letter”. 10.2/2 punctuation_connector Any character whose General Category is defined to be “Punctuation, Connector”. 10.3/2 other_format Any character whose General Category is defined to be “Other, Format”. 11/2 separator_space Any character whose General Category is defined to be “Separator, Space”. 12/2 separator_line Any character whose General Category is defined to be “Separator, Line”. 12.1/2 separator_paragraph Any character whose General Category is defined to be “Separator, Paragraph”. 13/3 format_effector The characters whose code points are 16#09# (CHARACTER TABULATION), 16#0A# (LINE FEED), 16#0B# (LINE TABULATION), 16#0C# (FORM FEED), 16#0D# (CARRIAGE RETURN), 16#85# (NEXT LINE), and the characters in categories separator_line and separator_paragraph. 13.1/2 other_control Any character whose General Category is defined to be “Other, Control”, and which is not defined to be a format_effector. 13.2/2 other_private_use Any character whose General Category is defined to be “Other, Private Use”. 13.3/2 other_surrogate Any character whose General Category is defined to be “Other, Surrogate”. 14/3 graphic_character the categories other_control, other_private_use, Any character other_surrogate, format_effector, and whose relative code point in its plane is neither 16#FFFE# nor 16#FFFF#. is not that in 15/3 The following names are used when referring to certain characters (the first name is that given in ISO/IEC 10646:2011): graphic symbol name graphic symbol name " # & ' ( ) * + , – . quotation mark number sign ampersand apostrophe, tick left parenthesis right parenthesis asterisk, multiply plus sign comma hyphen-minus, minus full stop, dot, point : ; < = > _ | / ! % colon semicolon less-than sign equals sign greater-than sign low line, underline vertical line solidus, divide exclamation point percent sign 2.1 Character Set 13 December 2012 10 Ada Reference Manual — 2012 Edition Implementation Requirements An Ada implementation shall accept Ada source code in UTF-8 encoding, with or without a BOM (see A.4.11), where every character is represented by its code point. The character pair CARRIAGE RETURN/LINE FEED (code points 16#0D# 16#0A#) signifies a single end of line (see 2.2); every other occurrence of a format_effector other than the character whose code point position is 16#09# (CHARACTER TABULATION) also signifies a single end of line. Implementation Permissions The categories defined above, as well as case mapping and folding, may be based on an implementation- defined version of ISO/IEC 10646 (2003 edition or later). NOTES 1 The characters in categories other_control, other_private_use, and other_surrogate are only allowed in comments. 2.2 Lexical Elements, Separators, and Delimiters Static Semantics The text of a program consists of the texts of one or more compilations. The text of each compilation is a sequence of separate lexical elements. Each lexical element is formed from a sequence of characters, and is either a delimiter, an identifier, a reserved word, a numeric_literal, a character_literal, a string_literal, or a comment. The meaning of a program depends only on the particular sequences of lexical elements that form its compilations, excluding comments. The text of a compilation is divided into lines. In general, the representation for an end of line is implementation defined. However, a sequence of one or more format_effectors other than the character whose code point is 16#09# (CHARACTER TABULATION) signifies at least one end of line. In some cases an explicit separator is required to separate adjacent lexical elements. A separator is any of a separator_space, a format_effector, or the end of a line, as follows: • A separator_space is a separator except within a comment, a string_literal, or a character_literal. • The character whose code point is 16#09# (CHARACTER TABULATION) is a separator except within a comment. • The end of a line is always a separator. One or more separators are allowed between any two adjacent lexical elements, before the first of each compilation, or after the last. At least one separator is required between an identifier, a reserved word, or a numeric_literal and an adjacent identifier, reserved word, or numeric_literal. 16/3 17/3 18/2 1 2/3 3/2 4/2 5/3 6 7 One or more other_format characters are allowed anywhere that a separator is; any such characters have no effect on the meaning of an Ada program. 7.1/3 A delimiter is either one of the following characters: & ' ( ) * + , – . / : ; < = > | or one of the following compound delimiters each composed of two adjacent special characters => .. ** := /= >= <= << >> <> 8/2 9 10 11 11 13 December 2012 Character Set 2.1 Ada Reference Manual — 2012 Edition 12 Each of the special characters listed for single character delimiters is a single delimiter except if this character is used as a character of a compound delimiter, or as a character of a comment, string_literal, character_literal, or numeric_literal. 13 The following names are used when referring to compound delimiters: delimiter => .. ** := /= >= <= << >> <> name arrow double dot double star, exponentiate assignment (pronounced: “becomes”) inequality (pronounced: “not equal”) greater than or equal less than or equal left label bracket right label bracket box 14 An implementation shall support lines of at least 200 characters in length, not counting any characters used to signify the end of a line. An implementation shall support lexical elements of at least 200 characters in length. The maximum supported line length and lexical element length are implementation defined. Implementation Requirements 2.3 Identifiers 1 Identifiers are used as names. 2/2 3/2 3.1/3 identifier ::= identifier_start {identifier_start | identifier_extend} Syntax identifier_start ::= letter_uppercase | letter_lowercase | letter_titlecase | letter_modifier | letter_other | number_letter identifier_extend ::= mark_non_spacing | mark_spacing_combining | number_decimal | punctuation_connector 4/3 An identifier shall not contain two consecutive characters in category punctuation_connector, or end with a character in that category. 2.2 Lexical Elements, Separators, and Delimiters 13 December 2012 12 Ada Reference Manual — 2012 Edition Static Semantics Two identifiers are considered the same if they consist of the same sequence of characters after applying locale-independent simple case folding, as defined by documents referenced in the note in Clause 1 of ISO/IEC 10646:2011. After applying simple case folding, an identifier shall not be identical to a reserved word. 5/3 5.1/3 In a nonstandard mode, an implementation may support other upper/lower case equivalence rules for identifiers, to accommodate local conventions. 6 Implementation Permissions NOTES 2 Identifiers differing only in the use of corresponding upper and lower case letters are considered the same. Examples Examples of identifiers: Count X Get_Symbol Ethelyn Marion Snobol_4 X1 Page_Count Store_Next_Item Πλάτων -- Plato Чайковский -- Tchaikovsky θ φ -- Angles 2.4 Numeric Literals There are two kinds of numeric_literals, real literals and integer literals. A real literal is a numeric_literal that includes a point; an integer literal is a numeric_literal without a point. numeric_literal ::= decimal_literal | based_literal Syntax NOTES 3 The type of an integer literal is universal_integer. The type of a real literal is universal_real. 2.4.1 Decimal Literals A decimal_literal is a numeric_literal in the conventional decimal notation (that is, the base is ten). Syntax decimal_literal ::= numeral [.numeral] [exponent] numeral ::= digit {[underline] digit} exponent ::= E [+] numeral | E – numeral digit ::= 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 An exponent for an integer literal shall not have a minus sign. Static Semantics An underline character in a numeric_literal does not affect its meaning. The letter E of an exponent can be written either in lower case or in upper case, with the same meaning. An exponent indicates the power of ten by which the value of the decimal_literal without the exponent is to be multiplied to obtain the value of the decimal_literal with the exponent. 13 13 December 2012 Identifiers 2.3 6.1/2 7 8/2 1 2 3 1 2 3 4 4.1/2 5 6 7 Ada Reference Manual — 2012 Edition Examples of decimal literals: 12 0 1E6 123_456 -- integer literals 12.0 0.0 0.456 3.14159_26 -- real literals Examples 2.4.2 Based Literals A based_literal is a numeric_literal expressed in a form that specifies the base explicitly. based_literal ::= base # based_numeral [.based_numeral] # [exponent] Syntax base ::= numeral based_numeral ::= extended_digit {[underline] extended_digit} extended_digit ::= digit | A | B | C | D | E | F Legality Rules The base (the numeric value of the decimal numeral preceding the first #) shall be at least two and at most sixteen. The extended_digits A through F represent the digits ten through fifteen, respectively. The value of each extended_digit of a based_literal shall be less than the base. Static Semantics The conventional meaning of based notation is assumed. An exponent indicates the power of the base by which the value of the based_literal without the exponent is to be multiplied to obtain the value of the based_literal with the exponent. The base and the exponent, if any, are in decimal notation. The extended_digits A through F can be written either in lower case or in upper case, with the same meaning. Examples of based literals: Examples 2#1111_1111# 16#FF# 016#0ff# -- integer literals of value 255 16#E#E1 2#1110_0000# -- integer literals of value 224 16#F.FF#E+2 2#1.1111_1111_1110#E11 -- real literals of value 4095.0 2.5 Character Literals A character_literal is formed by enclosing a graphic character between two apostrophe characters. character_literal ::= 'graphic_character' NOTES 4 A character_literal is an enumeration literal of a character type. See 3.5.2. Syntax 8 9 1 2 3 4 5 6 7 8 9 10 1 2 3 2.4.1 Decimal Literals 13 December 2012 14 Ada Reference Manual — 2012 Edition Examples of character literals: 'A' '*' ''' ' ' 'L' 'Л' 'Λ' -- Various els. '∞' 'א' -- Big numbers - infinity and aleph. Examples 2.6 String Literals A string_literal is formed by a sequence of graphic characters (possibly none) enclosed between two quotation marks used as string brackets. They are used to represent operator_symbols (see 6.1), values of a string type (see 4.2), and array subaggregates (see 4.3.3). string_literal ::= "{string_element}" string_element ::= "" | non_quotation_mark_graphic_character Syntax A string_element is either a pair of quotation marks (""), or a single graphic_character other than a quotation mark. Static Semantics The sequence of characters of a string_literal is formed from the sequence of string_elements between the bracketing quotation marks, in the given order, with a string_element that is "" becoming a single quotation mark in the sequence of characters, and any other string_element being reproduced in the sequence. A null string literal is a string_literal with no string_elements between the quotation marks. NOTES 5 An end of line cannot appear in a string_literal. 6 No transformation is performed on the sequence of characters of a string_literal. Examples of string literals: "Message of the day:" Examples "" -- a null string literal " " "A" """" -- three string literals of length 1 "Characters such as $, %, and } are allowed in string literals" "Archimedes said ""Εύρηκα""" "Volume of cylinder (πr²h) = " 2.7 Comments A comment starts with two adjacent hyphens and extends up to the end of the line. comment ::= --{non_end_of_line_character} A comment may appear on any line of a program. Syntax 4 5/2 1 2 3 4 5 6 7 7.1/2 8 9/2 1 2 3 15 13 December 2012 Character Literals 2.5 4 5 6 1 2 3/3 4/3 5 6 7/3 7.1/3 7.2/3 8 9 10/3 Ada Reference Manual — 2012 Edition The presence or absence of comments has no influence on whether a program is legal or illegal. Furthermore, comments do not influence the meaning of a program; their sole purpose is the enlightenment of the human reader. Static Semantics Examples of comments: -- the last sentence above echoes the Algol 68 report Examples end; -- processing of Line is complete -- a long comment may be split onto -- two or more consecutive lines ---------------- the first two hyphens start the comment 2.8 Pragmas A pragma is a compiler directive. There are language-defined pragmas that give instructions for optimization, listing control, etc. An implementation may support additional (implementation-defined) pragmas. pragma ::= pragma identifier [(pragma_argument_association {, pragma_argument_association})]; Syntax pragma_argument_association ::= [pragma_argument_identifier =>] name | [pragma_argument_identifier =>] expression | pragma_argument_aspect_mark => name | pragma_argument_aspect_mark => expression In a pragma, any pragma_argument_associations without a pragma_argument_identifier or pragma_argument_aspect_mark shall precede any associations with a pragma_argument_identifier or pragma_argument_aspect_mark. Pragmas are only allowed at the following places in a program: • After a semicolon delimiter, but not within a formal_part or discriminant_part. • At any place where the syntax rules allow a construct defined by a syntactic category whose name ends with “declaration”, “item”, “statement”, “clause”, or “alternative”, or one of the syntactic categories variant or exception_handler; but not in place of such a construct if the construct is required, or is part of a list that is required to have at least one such construct. • In place of a statement in a sequence_of_statements. • At any place where a compilation_unit is allowed. Additional syntax rules and placement restrictions exist for specific pragmas. The name of a pragma is the identifier following the reserved word pragma. The name or expression of a pragma_argument_association is a pragma argument. An identifier specific to a pragma is an identifier or reserved word that is used in a pragma argument with special meaning for that pragma. 2.7 Comments 13 December 2012 16 Ada Reference Manual — 2012 Edition If an implementation does not recognize the name of a pragma, then it has no effect on the semantics of the program. Inside such a pragma, the only rules that apply are the Syntax Rules. Static Semantics Any pragma that appears at the place of an executable construct is executed. Unless otherwise specified for a particular pragma, this execution consists of the evaluation of each evaluable pragma argument in an arbitrary order. Dynamic Semantics The implementation shall give a warning message for an unrecognized pragma name. Implementation Requirements Implementation Permissions An implementation may provide implementation-defined pragmas; the name of an implementation-defined pragma shall differ from those of the language-defined pragmas. An implementation may ignore an unrecognized pragma even if it violates some of the Syntax Rules, if detecting the syntax error is too complex. Implementation Advice Normally, implementation-defined pragmas should have no semantic effect for error-free programs; that is, if the implementation-defined pragmas in a working program are replaced with unrecognized pragmas, the program should still be legal, and should still have the same semantics. Normally, an implementation should not define pragmas that can make an illegal program legal, except as follows: • A pragma used to complete a declaration; • A pragma used to configure the environment by adding, removing, or replacing library_items. The forms of List, Page, and Optimize pragmas are as follows: pragma List(identifier); Syntax pragma Page; pragma Optimize(identifier); Other pragmas are defined throughout this International Standard, and are summarized in Annex L. Static Semantics A pragma List takes one of the identifiers On or Off as the single argument. This pragma is allowed anywhere a pragma is allowed. It specifies that listing of the compilation is to be continued or suspended until a List pragma with the opposite argument is given within the same compilation. The pragma itself is always listed if the compiler is producing a listing. A pragma Page is allowed anywhere a pragma is allowed. It specifies that the program text which follows the pragma should start on a new page (if the compiler is currently producing a listing). A pragma Optimize takes one of the identifiers Time, Space, or Off as the single argument. This pragma is allowed anywhere a pragma is allowed, and it applies until the end of the immediately enclosing declarative region, or for a pragma at the place of a compilation_unit, to the end of the compilation. It 11 12 13 14 15 16/3 17 18/3 19 20 21 22 23 24 25 26 27 17 13 December 2012 Pragmas 2.8 Ada Reference Manual — 2012 Edition gives advice to the implementation as to whether time or space is the primary optimization criterion, or that optional optimizations should be turned off. It is implementation defined how this advice is followed. 28 Examples of pragmas: Examples 29/3 1/1 2/3 pragma List(Off); -- turn off listing generation pragma Optimize(Off); -- turn off optional optimizations pragma Pure(Rational_Numbers); -- set categorization for package pragma Assert(Exists(File_Name), Message => "Nonexistent file"); -- assert file exists 2.9 Reserved Words This paragraph was deleted. Syntax The following are the reserved words. Within a program, some or all of the letters of a reserved word may be in upper case. abort abs abstract accept access aliased all and array at begin body case constant declare delay delta digits do else elsif end entry exception exit for function generic goto if in interface is limited loop mod new not null of or others out overriding package pragma private procedure protected raise range record rem renames requeue return reverse select separate some subtype synchronized tagged task terminate then type until use when while with xor 3 NOTES 7 The reserved words appear in lower case boldface in this International Standard, except when used in the designator of an attribute (see 4.1.4). Lower case boldface is also used for a reserved word in a string_literal used as an operator_symbol. This is merely a convention — programs may be written in whatever typeface is desired and available. 2.8 Pragmas 13 December 2012 18 Ada Reference Manual — 2012 Edition 3 Declarations and Types This clause describes the types in the language and the rules for declaring constants, variables, and named numbers. 1/3 3.1 Declarations The language defines several kinds of named entities that are declared by declarations. The entity's name is defined by the declaration, usually by a defining_identifier, but sometimes by a defining_character_- literal or defining_operator_symbol. There are several forms of declaration. A basic_declaration is a form of declaration defined as follows. basic_declaration ::= type_declaration | object_declaration | subprogram_declaration | null_procedure_declaration | package_declaration | exception_declaration | generic_instantiation defining_identifier ::= identifier Syntax | subtype_declaration | number_declaration | abstract_subprogram_declaration | expression_function_declaration | renaming_declaration | generic_declaration Static Semantics A declaration is a language construct that associates a name with (a view of) an entity. A declaration may appear explicitly in the program text (an explicit declaration), or may be supposed to occur at a given place in the text as a consequence of the semantics of another construct (an implicit declaration). Each of the following is defined to be a declaration: any basic_declaration; an enumeration_literal_- specification; a discriminant_specification; a component_declaration; a loop_parameter_specification; an iterator_specification; a parameter_specification; a subprogram_body; an extended_return_object_- declaration; an entry_declaration; an entry_index_specification; a choice_parameter_specification; a generic_formal_parameter_declaration. All declarations contain a definition for a view of an entity. A view consists of an identification of the entity (the entity of the view), plus view-specific characteristics that affect the use of the entity through that view (such as mode of access to an object, formal parameter names and defaults for a subprogram, or visibility to components of a type). In most cases, a declaration also contains the definition for the entity itself (a renaming_declaration is an example of a declaration that does not define a new entity, but instead defines a view of an existing entity (see 8.5)). 1 2 3/3 4 5 6/3 7 When it is clear from context, the term object is used in place of view of an object. Similarly, the terms type and subtype are used in place of view of a type and view of a subtype, respectively. 7.1/3 For each declaration, the language rules define a certain region of text called the scope of the declaration (see 8.2). Most declarations associate an identifier with a declared entity. Within its scope, and only there, there are places where it is possible to use the identifier to refer to the declaration, the view it defines, and the associated entity; these places are defined by the visibility rules (see 8.3). At such places the identifier is said to be a name of the entity (the direct_name or selector_name); the name is said to denote the 8 19 13 December 2012 Declarations and Types 3 Ada Reference Manual — 2012 Edition declaration, the view, and the associated entity (see 8.6). The declaration is said to declare the name, the view, and in most cases, the entity itself. As an alternative to an identifier, an enumeration literal can be declared with a character_literal as its name (see 3.5.1), and a function can be declared with an operator_symbol as its name (see 6.1). The syntax rules use the terms defining_identifier, defining_character_literal, and defining_operator_- symbol for the defining occurrence of a name; these are collectively called defining names. The terms direct_name and selector_name are used for usage occurrences of identifiers, character_literals, and operator_symbols. These are collectively called usage names. Dynamic Semantics The process by which a construct achieves its run-time effect is called execution. This process is also called elaboration for declarations and evaluation for expressions. One of the terms execution, elaboration, or evaluation is defined by this International Standard for each construct that has a run-time effect. NOTES 1 At compile time, the declaration of an entity declares the entity. At run time, the elaboration of the declaration creates the entity. 3.2 Types and Subtypes Static Semantics A type is characterized by a set of values, and a set of primitive operations which implement the fundamental aspects of its semantics. An object of a given type is a run-time entity that contains (has) a value of the type. Types are grouped into categories of types. There exist several language-defined categories of types (see NOTES below), reflecting the similarity of their values and primitive operations. Most categories of types form classes of types. Elementary types are those whose values are logically indivisible; composite types are those whose values are composed of component values. The elementary types are the scalar types (discrete and real) and the access types (whose values provide access to objects or subprograms). Discrete types are either integer types or are defined by enumeration of their values (enumeration types). Real types are either floating point types or fixed point types. The composite types are the record types, record extensions, array types, interface types, task types, and protected types. There can be multiple views of a type with varying sets of operations. An incomplete type represents an incomplete view (see 3.10.1) of a type with a very restricted usage, providing support for recursive data structures. A private type or private extension represents a partial view (see 7.3) of a type, providing support for data abstraction. The full view (see 3.2.1) of a type represents its complete definition. An incomplete or partial view is considered a composite type, even if the full view is not. Certain composite types (and views thereof) have special components called discriminants whose values affect the presence, constraints, or initialization of other components. Discriminants can be thought of as parameters of the type. The term subcomponent is used in this International Standard in place of the term component to indicate either a component, or a component of another subcomponent. Where other subcomponents are excluded, 9 10 11 12 1 2/2 3 4/2 4.1/2 5/2 6/2 3.1 Declarations 13 December 2012 20 7/2 8/2 9 10/2 11/2 12/2 Ada Reference Manual — 2012 Edition the term component is used instead. Similarly, a part of an object or value is used to mean the whole object or value, or any set of its subcomponents. The terms component, subcomponent, and part are also applied to a type meaning the component, subcomponent, or part of objects and values of the type. The set of possible values for an object of a given type can be subjected to a condition that is called a constraint (the case of a null constraint that specifies no restriction is also included); the rules for which values satisfy a given kind of constraint are given in 3.5 for range_constraints, 3.6.1 for index_constraints, and 3.7.1 for discriminant_constraints. The set of possible values for an object of an access type can also be subjected to a condition that excludes the null value (see 3.10). A subtype of a given type is a combination of the type, a constraint on values of the type, and certain attributes specific to the subtype. The given type is called the type of the subtype. Similarly, the associated constraint is called the constraint of the subtype. The set of values of a subtype consists of the values of its type that satisfy its constraint and any exclusion of the null value. Such values belong to the subtype. A subtype is called an unconstrained subtype if its type has unknown discriminants, or if its type allows range, index, or discriminant constraints, but the subtype does not impose such a constraint; otherwise, the subtype is called a constrained subtype (since it has no unconstrained characteristics). NOTES 2 Any set of types can be called a “category” of types, and any set of types that is closed under derivation (see 3.4) can be called a “class” of types. However, only certain categories and classes are used in the description of the rules of the language — generally those that have their own particular set of primitive operations (see 3.2.3), or that correspond to a set of types that are matched by a given kind of generic formal type (see 12.5). The following are examples of “interesting” language-defined classes: elementary, scalar, discrete, enumeration, character, boolean, integer, signed integer, modular, real, floating point, fixed point, ordinary fixed point, decimal fixed point, numeric, access, access-to- object, access-to-subprogram, composite, array, string, (untagged) record, tagged, task, protected, nonlimited. Special syntax is provided to define types in each of these classes. In addition to these classes, the following are examples of “interesting” language-defined categories: abstract, incomplete, interface, limited, private, record. These language-defined categories are organized like this: all types elementary scalar discrete enumeration character boolean other enumeration integer signed integer modular integer real floating point fixed point ordinary fixed point decimal fixed point access access-to-object access-to-subprogram composite untagged array string other array record task protected 21 13 December 2012 Types and Subtypes 3.2 Ada Reference Manual — 2012 Edition tagged (including interfaces) nonlimited tagged record limited tagged limited tagged record synchronized tagged tagged task tagged protected 13/2 There are other categories, such as “numeric” and “discriminated”, which represent other categorization dimensions, but do not fit into the above strictly hierarchical picture. 1 2 3/3 4/2 5 6 7/2 8/2 3.2.1 Type Declarations A type_declaration declares a type and its first subtype. type_declaration ::= full_type_declaration | incomplete_type_declaration | private_type_declaration | private_extension_declaration Syntax full_type_declaration ::= type defining_identifier [known_discriminant_part] is type_definition [aspect_specification]; | task_type_declaration | protected_type_declaration type_definition ::= enumeration_type_definition | real_type_definition | record_type_definition | derived_type_definition | integer_type_definition | array_type_definition | access_type_definition | interface_type_definition Legality Rules A given type shall not have a subcomponent whose type is the given type itself. Static Semantics The defining_identifier of a type_declaration denotes the first subtype of the type. The known_- discriminant_part, if any, defines the discriminants of the type (see 3.7, “Discriminants”). The remainder of the type_declaration defines the remaining characteristics of (the view of) the type. A type defined by a type_declaration is a named type; such a type has one or more nameable subtypes. Certain other forms of declaration also include type definitions as part of the declaration for an object. The type defined by such a declaration is anonymous — it has no nameable subtypes. For explanatory purposes, this International Standard sometimes refers to an anonymous type by a pseudo-name, written in italics, and uses such pseudo-names at places where the syntax normally requires an identifier. For a named type whose first subtype is T, this International Standard sometimes refers to the type of T as simply “the type T”. A named type that is declared by a full_type_declaration, or an anonymous type that is defined by an access_definition or as part of declaring an object of the type, is called a full type. The declaration of a full type also declares the full view of the type. The type_definition, task_definition, protected_definition, or access_definition that defines a full type is called a full type definition. Types declared by other forms of type_declaration are not separate types; they are partial or incomplete views of some full type. 3.2 Types and Subtypes 13 December 2012 22 Ada Reference Manual — 2012 Edition The definition of a type implicitly declares certain predefined operators that operate on the type, according to what classes the type belongs, as specified in 4.5, “Operators and Expression Evaluation”. The predefined types (for example the types Boolean, Wide_Character, Integer, root_integer, and universal_integer) are the types that are defined in a predefined library package called Standard; this package also includes the (implicit) declarations of their predefined operators. The package Standard is described in A.1. The elaboration of a full_type_declaration consists of the elaboration of the full type definition. Each elaboration of a full type definition creates a distinct type and its first subtype. Dynamic Semantics Examples of type definitions: (White, Red, Yellow, Green, Blue, Brown, Black) range 1 .. 72 array(1 .. 10) of Integer Examples Examples of type declarations: type Color is (White, Red, Yellow, Green, Blue, Brown, Black); type Column is range 1 .. 72; type Table is array(1 .. 10) of Integer; NOTES 3 Each of the above examples declares a named type. The identifier given denotes the first subtype of the type. Other named subtypes of the type can be declared with subtype_declarations (see 3.2.2). Although names do not directly denote types, a phrase like “the type Column” is sometimes used in this International Standard to refer to the type of Column, where Column denotes the first subtype of the type. For an example of the definition of an anonymous type, see the declaration of the array Color_Table in 3.3.1; its type is anonymous — it has no nameable subtypes. 9 10 11 12 13 14 15 16 3.2.2 Subtype Declarations A subtype_declaration declares a subtype of some previously declared type, as defined by a subtype_indication. 1 subtype_declaration ::= subtype defining_identifier is subtype_indication [aspect_specification]; Syntax subtype_indication ::= [null_exclusion] subtype_mark [constraint] subtype_mark ::= subtype_name constraint ::= scalar_constraint | composite_constraint scalar_constraint ::= range_constraint | digits_constraint | delta_constraint composite_constraint ::= index_constraint | discriminant_constraint Name Resolution Rules A subtype_mark shall resolve to denote a subtype. The type determined by a subtype_mark is the type of the subtype denoted by the subtype_mark. 23 13 December 2012 Type Declarations 3.2.1 2/3 3/2 4 5 6 7 8 Ada Reference Manual — 2012 Edition Dynamic Semantics 9 10 11 12 13 The elaboration of a subtype_declaration consists of the elaboration of the subtype_indication. The elaboration of a subtype_indication creates a new subtype. If the subtype_indication does not include a constraint, the new subtype has the same (possibly null) constraint as that denoted by the subtype_mark. The elaboration of a subtype_indication that includes a constraint proceeds as follows: • The constraint is first elaborated. • A check is then made that the constraint is compatible with the subtype denoted by the subtype_mark. The condition imposed by a constraint is the condition obtained after elaboration of the constraint. The rules defining compatibility are given for each form of constraint in the appropriate subclause. These rules are such that if a constraint is compatible with a subtype, then the condition imposed by the constraint cannot contradict any condition already imposed by the subtype on its values. The exception Constraint_Error is raised if any check of compatibility fails. NOTES 4 A scalar_constraint may be applied to a subtype of an appropriate scalar type (see 3.5, 3.5.9, and J.3), even if the subtype is already constrained. On the other hand, a composite_constraint may be applied to a composite subtype (or an access-to-composite subtype) only if the composite subtype is unconstrained (see 3.6.1 and 3.7.1). 14 Examples of subtype declarations: Examples 15/2 1/2 2 3 4 5 6 subtype Rainbow is Color range Red .. Blue; -- see 3.2.1 subtype Red_Blue is Rainbow; subtype Int is Integer; subtype Small_Int is Integer range -10 .. 10; subtype Up_To_K is Column range 1 .. K; -- see 3.2.1 subtype Square is Matrix(1 .. 10, 1 .. 10); -- see 3.6 subtype Male is Person(Sex => M); -- see 3.10.1 subtype Binop_Ref is not null Binop_Ptr; -- see 3.10 3.2.3 Classification of Operations Static Semantics An operation operates on a type T if it yields a value of type T, if it has an operand whose expected type (see 8.6) is T, or if it has an access parameter or access result type (see 6.1) designating T. A predefined operator, or other language-defined operation such as assignment or a membership test, that operates on a type, is called a predefined operation of the type. The primitive operations of a type are the predefined operations of the type, plus any user-defined primitive subprograms. The primitive subprograms of a specific type are defined as follows: • The predefined operators of the type (see 4.5); • For a derived type, the inherited (see 3.4) user-defined subprograms; • For an enumeration type, the enumeration literals (which are considered parameterless functions — see 3.5.1); • For a specific type declared immediately within a package_specification, any subprograms (in addition to the enumeration literals) that are explicitly declared immediately within the same package_specification and that operate on the type; 6.1/3 • For a specific type with an explicitly declared primitive "=" operator whose result type is Boolean, the corresponding "/=" operator (see 6.6); 3.2.2 Subtype Declarations 13 December 2012 24 Ada Reference Manual — 2012 Edition • For a nonformal type, any subprograms not covered above that are explicitly declared immediately within the same declarative region as the type and that override (see 8.3) other implicitly declared primitive subprograms of the type. A primitive subprogram whose designator is an operator_symbol is called a primitive operator. 3.2.4 Subtype Predicates The language-defined predicate aspects Static_Predicate and Dynamic_Predicate may be used to define properties of subtypes. A predicate specification is an aspect_specification for one of the two predicate aspects. General rules for aspects and aspect_specifications are found in Clause 13 (13.1 and 13.1.1 respectively). The expected type for a predicate aspect expression is any boolean type. Name Resolution Rules Static Semantics A predicate specification may be given on a type_declaration or a subtype_declaration, and applies to the declared subtype. In addition, predicate specifications apply to certain other subtypes: • For a (first) subtype defined by a derived type declaration, the predicates of the parent subtype and the progenitor subtypes apply. • For a subtype created by a subtype_indication, the predicate of the subtype denoted by the subtype_mark applies. The predicate of a subtype consists of all predicate specifications that apply, and-ed together; if no predicate specifications apply, the predicate is True (in particular, the predicate of a base subtype is True). Predicate checks are defined to be enabled or disabled for a given subtype as follows: • If a subtype is declared by a type_declaration or subtype_declaration that includes a predicate specification, then: • • if performing checks is required by the Static_Predicate assertion policy (see 11.4.2) and the declaration includes a Static_Predicate specification, then predicate checks are enabled for the subtype; if performing checks is required by the Dynamic_Predicate assertion policy (see 11.4.2) and the declaration includes a Dynamic_Predicate specification, then predicate checks are enabled for the subtype; • otherwise, predicate checks are disabled for the subtype, regardless of whether predicate checking is enabled for any other subtypes mentioned in the declaration; • If a subtype is defined by a derived type declaration that does not include a predicate specification, then predicate checks are enabled for the subtype if and only if predicate checks are enabled for at least one of the parent subtype and the progenitor subtypes; • If a subtype is created by a subtype_indication other than in one of the previous cases, then predicate checks are enabled for the subtype if and only if predicate checks are enabled for the subtype denoted by the subtype_mark; • Otherwise, predicate checks are disabled for the given subtype. 7/2 8 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 14/3 The expression of a Static_Predicate specification shall be predicate-static; that is, one of the following: 15/3 Legality Rules 25 13 December 2012 Classification of Operations 3.2.3 Ada Reference Manual — 2012 Edition 16/3 17/3 • a static expression; • a membership test whose simple_expression is the current instance, and whose membership_choice_list meets the requirements for a static membership test (see 4.9); 18/3 • a case_expression whose selecting_expression is the current instance, and whose dependent_expressions are static expressions; 19/3 • a call to a predefined equality or ordering operator, where one operand is the current instance, and the other is a static expression; 20/3 21/3 22/3 23/3 24/3 25/3 26/3 27/3 28/3 29/3 30/3 31/3 • a call to a predefined boolean logical operator, where each operand is predicate-static; • a short-circuit control form where both operands are predicate-static; or • a parenthesized predicate-static expression. A predicate shall not be specified for an incomplete subtype. If a predicate applies to a subtype, then that predicate shall not mention any other subtype to which the same predicate applies. An index subtype, discrete_range of an index_constraint or slice, or a discrete_subtype_definition of a constrained_array_definition, entry_declaration, or entry_index_specification shall not denote a subtype to which predicate specifications apply. The prefix of an attribute_reference whose attribute_designator is First, Last, or Range shall not denote a scalar subtype to which predicate specifications apply. The discrete_subtype_definition of a loop_parameter_specification shall not denote a nonstatic subtype to which predicate specifications apply or any subtype to which Dynamic_Predicate specifications apply. The discrete_choice of a named_array_aggregate shall not denote a nonstatic subtype to which predicate specifications apply. In addition to the places where Legality Rules normally apply (see 12.3), these rules apply also in the private part of an instance of a generic unit. If predicate checks are enabled for a given subtype, then: Dynamic Semantics On every subtype conversion, the predicate of the target subtype is evaluated, and a check is performed that the predicate is True. This includes all parameter passing, except for certain parameters passed by reference, which are covered by the following rule: After normal completion and leaving of a subprogram, for each in out or out parameter that is passed by reference, the predicate of the subtype of the actual is evaluated, and a check is performed that the predicate is True. For an object created by an object_declaration with no explicit initialization expression, or by an uninitialized allocator, if any subcomponents have default_expressions, the predicate of the nominal subtype of the created object is evaluated, and a check is performed that the predicate is True. Assertions.Assertion_Error is raised if any of these checks fail. 32/3 A value satisfies a predicate if the predicate is True for that value. 33/3 If any of the above Legality Rules is violated in an instance of a generic unit, Program_Error is raised at the point of the violation. 3.2.4 Subtype Predicates 13 December 2012 26 Ada Reference Manual — 2012 Edition NOTES 5 A predicate specification does not cause a subtype to be considered constrained. 6 A Static_Predicate, like a constraint, always remains True for all objects of the subtype, except in the case of uninitialized variables and other invalid values. A Dynamic_Predicate, on the other hand, is checked as specified above, but can become False at other times. For example, the predicate of a record subtype is not checked when a subcomponent is modified. 3.3 Objects and Named Numbers Objects are created at run time and contain a value of a given type. An object can be created and initialized as part of elaborating a declaration, evaluating an allocator, aggregate, or function_call, or passing a parameter by copy. Prior to reclaiming the storage for an object, it is finalized if necessary (see 7.6.1). All of the following are objects: Static Semantics the entity declared by an object_declaration; • • a formal parameter of a subprogram, entry, or generic subprogram; • a generic formal object; • a loop parameter; • a choice parameter of an exception_handler; • an entry index of an entry_body; • • • • a qualified_expression whose operand denotes an object; • a component, slice, or view conversion of another object. the result of dereferencing an access-to-object value (see 4.1); the result of evaluating an aggregate; the return object of a function; An object is either a constant object or a variable object. Similarly, a view of an object is either a constant or a variable. All views of a constant elementary object are constant. All views of a constant composite object are constant, except for parts that are of controlled or immutably limited types; variable views of those parts and their subcomponents may exist. In this sense, objects of controlled and immutably limited types are inherently mutable. A constant view of an object cannot be used to modify its value. The terms constant and variable by themselves refer to constant and variable views of objects. The value of an object is read when the value of any part of the object is evaluated, or when the value of an enclosing object is evaluated. The value of a variable is updated when an assignment is performed to any part of the variable, or when an assignment is performed to an enclosing object. Whether a view of an object is constant or variable is determined by the definition of the view. The following (and no others) represent constants: • an object declared by an object_declaration with the reserved word constant; • a formal parameter or generic formal object of mode in; • a discriminant; • a loop parameter unless specified to be a variable for a generalized loop (see 5.5.2); • a choice parameter or entry index; 27 13 December 2012 Subtype Predicates 3.2.4 34/3 35/3 1 2 3 4 5 6 7 8 9 10/3 11 11.1/3 12 13/3 14 15 16 17 18 18.1/3 19/3 Ada Reference Manual — 2012 Edition 20 20.1/3 21/3 21.1/3 21.2/3 22 23/3 the dereference of an access-to-constant value; the return object declared by an extended_return_statement with the reserved word constant; • • • • • within the body of a protected function (or a function declared immediately within a the object denoted by a function_call or an aggregate; the result of evaluating a qualified_expression; protected_body), the current instance of the enclosing protected unit; • a selected_component, indexed_component, slice, or view conversion of a constant. At the place where a view of an object is defined, a nominal subtype is associated with the view. The object's actual subtype (that is, its subtype) can be more restrictive than the nominal subtype of the view; it always is if the nominal subtype is an indefinite subtype. A subtype is an indefinite subtype if it is an unconstrained array subtype, or if it has unknown discriminants or unconstrained discriminants without defaults (see 3.7); otherwise, the subtype is a definite subtype (all elementary subtypes are definite subtypes). A class-wide subtype is defined to have unknown discriminants, and is therefore an indefinite subtype. An indefinite subtype does not by itself provide enough information to create an object; an additional constraint or explicit initialization expression is necessary (see 3.3.1). A component cannot have an indefinite nominal subtype. 23.1/3 A view of a composite object is known to be constrained if: 23.2/3 23.3/3 23.4/3 23.5/3 23.6/3 23.7/3 23.8/3 23.9/3 • • • • • • • • its nominal subtype is constrained, and is not an untagged partial view; or its nominal subtype is indefinite; or its type is immutably limited (see 7.5); or it is part of a stand-alone constant (including a generic formal object of mode in); or it is part of a formal parameter of mode in; or it is part of the object denoted by a function_call or aggregate; or it is part of a constant return object of an extended_return_statement; or it is a dereference of a pool-specific access type, and there is no ancestor of its type that has a constrained partial view. 23.10/3 For the purposes of determining within a generic body whether an object is known to be constrained: 23.11/3 23.12/3 • • if a subtype is a descendant of an untagged generic formal private or derived type, and the subtype is not an unconstrained array subtype, it is not considered indefinite and is considered to have a constrained partial view; if a subtype is a descendant of a formal access type, it is not considered pool-specific. 24 25 25.1/3 26/3 A named number provides a name for a numeric value known at compile time. It is declared by a number_declaration. NOTES 7 A constant cannot be the target of an assignment operation, nor be passed as an in out or out parameter, between its initialization and finalization, if any. 8 The value of a constant object cannot be changed after its initialization, except in some cases where the object has a controlled or immutably limited part (see 7.5, 7.6, and 13.9.1). 9 The nominal and actual subtypes of an elementary object are always the same. For a discriminated or array object, if the nominal subtype is constrained, then so is the actual subtype. 3.3 Objects and Named Numbers 13 December 2012 28 Ada Reference Manual — 2012 Edition 3.3.1 Object Declarations An object_declaration declares a stand-alone object with a given nominal subtype and, optionally, an explicit initial value given by an initialization expression. For an array, access, task, or protected object, the object_declaration may include the definition of the (anonymous) type of the object. Syntax object_declaration ::= defining_identifier_list : [aliased] [constant] subtype_indication [:= expression] [aspect_specification]; | defining_identifier_list : [aliased] [constant] access_definition [:= expression] [aspect_specification]; | defining_identifier_list : [aliased] [constant] array_type_definition [:= expression] [aspect_specification]; | single_task_declaration | single_protected_declaration defining_identifier_list ::= defining_identifier {, defining_identifier} Name Resolution Rules For an object_declaration with an expression following the compound delimiter :=, the type expected for the expression is that of the object. This expression is called the initialization expression. An object_declaration without the reserved word constant declares a variable object. If it has a subtype_indication or an array_type_definition that defines an indefinite subtype, then there shall be an initialization expression. Legality Rules Static Semantics An object_declaration with the reserved word constant declares a constant object. If it has an initialization expression, then it is called a full constant declaration. Otherwise, it is called a deferred constant declaration. The rules for deferred constant declarations are given in subclause 7.4. The rules for full constant declarations are given in this subclause. Any declaration that includes a defining_identifier_list with more than one defining_identifier is equivalent to a series of declarations each containing one defining_identifier from the list, with the rest of the text of the declaration copied for each declaration in the series, in the same order as the list. The remainder of this International Standard relies on this equivalence; explanations are given for declarations with a single defining_identifier. The subtype_indication, access_definition, or full type definition of an object_declaration defines the nominal subtype of the object. The object_declaration declares an object of the type of the nominal subtype. A component of an object is said to require late initialization if it has an access discriminant value constrained by a per-object expression, or if it has an initialization expression that includes a name denoting the current instance of the type or denoting an access discriminant. 1/3 2/3 3 4 5/2 6/3 7 8/2 8.1/2 29 13 December 2012 Object Declarations 3.3.1 Ada Reference Manual — 2012 Edition Dynamic Semantics 9/2 10 11 11.1/3 If a composite object declared by an object_declaration has an unconstrained nominal subtype, then if this subtype is indefinite or the object is constant the actual subtype of this object is constrained. The constraint is determined by the bounds or discriminants (if any) of its initial value; the object is said to be constrained by its initial value. When not constrained by its initial value, the actual and nominal subtypes of the object are the same. If its actual subtype is constrained, the object is called a constrained object. For an object_declaration without an initialization expression, any initial values for the object or its subcomponents are determined by the implicit initial values defined for its nominal subtype, as follows: • The implicit initial value for an access subtype is the null value of the access type. • The implicit initial value for a scalar subtype that has the Default_Value aspect specified is the value of that aspect converted to the nominal subtype (which might raise Constraint_Error — see 4.6, “Type Conversions”); 12 • The implicit initial (and only) value for each discriminant of a constrained discriminated subtype is defined by the subtype. 13/3 • For a (definite) composite subtype, the implicit initial value of each component with a default_expression is obtained by evaluation of this expression and conversion to the component's nominal subtype (which might raise Constraint_Error), unless the component is a discriminant of a constrained subtype (the previous case), or is in an excluded variant (see 3.8.1). For each component that does not have a default_expression, if the composite subtype has the Default_Component_Value aspect specified, the implicit initial value is the value of that aspect converted to the component's nominal subtype; otherwise, any implicit initial values are those determined by the component's nominal subtype. 14 • For a protected or task subtype, there is an implicit component (an entry queue) corresponding to each entry, with its implicit initial value being an empty queue. 15 The elaboration of an object_declaration proceeds in the following sequence of steps: 16/2 17 18/2 19/2 20/2 1. The subtype_indication, access_definition, array_type_definition, single_task_declaration, or single_protected_declaration is first elaborated. This creates the nominal subtype (and the anonymous type in the last four cases). 2. If the object_declaration includes an initialization expression, the (explicit) initial value is obtained by evaluating the expression and converting it to the nominal subtype (which might raise Constraint_Error — see 4.6). 3. The object is created, and, if there is not an initialization expression, the object is initialized by default. When an object is initialized by default, any per-object constraints (see 3.8) are elaborated and any implicit initial values for the object or for its subcomponents are obtained as determined by the nominal subtype. Any initial values (whether explicit or implicit) are assigned to the object or to the corresponding subcomponents. As described in 5.2 and 7.6, Initialize and Adjust procedures can be called. This paragraph was deleted. For the third step above, evaluations and assignments are performed in an arbitrary order subject to the following restrictions: 20.1/2 • Assignment to any part of the object is preceded by the evaluation of the value that is to be assigned. 20.2/2 • The evaluation of a default_expression that includes the name of a discriminant is preceded by the assignment to that discriminant. 3.3.1 Object Declarations 13 December 2012 30 Ada Reference Manual — 2012 Edition • The evaluation of the default_expression for any component that depends on a discriminant is preceded by the assignment to that discriminant. • The assignments to any components, including implicit components, not requiring late initialization precede the initial value evaluations for any components requiring late initialization; if two components both require late initialization, then assignments to parts of the component occurring earlier in the order of the component declarations precede the initial value evaluations of the component occurring later. 20.3/2 20.4/3 There is no implicit initial value defined for a scalar subtype unless the Default_Value aspect has been specified for the type. In the absence of an explicit initialization or the specification of the Default_Value aspect, a newly created scalar object might have a value that does not belong to its subtype (see 13.9.1 and H.1). NOTES 10 Implicit initial values are not defined for an indefinite subtype, because if an object's nominal subtype is indefinite, an explicit initial value is required. 11 As indicated above, a stand-alone object is an object declared by an object_declaration. Similar definitions apply to “stand-alone constant” and “stand-alone variable.” A subcomponent of an object is not a stand-alone object, nor is an object that is created by an allocator. An object declared by a loop_parameter_specification, iterator_specification, parameter_specification, entry_index_specification, choice_parameter_specification, extended_return_statement, or a formal_object_declaration of mode in out is not considered a stand-alone object. 12 The type of a stand-alone object cannot be abstract (see 3.9.3). Examples Example of a multiple object declaration: -- the multiple object declaration John, Paul : not null Person_Name := new Person(Sex => M); -- see 3.10.1 -- is equivalent to the two single object declarations in the order given John : not null Person_Name := new Person(Sex => M); Paul : not null Person_Name := new Person(Sex => M); Examples of variable declarations: Count, Sum : Integer; Size : Integer range 0 .. 10_000 := 0; Sorted : Boolean := False; Color_Table : array(1 .. Max) of Color; Option : Bit_Vector(1 .. 10) := (others => True); Hello : aliased String := "Hi, world."; θ, φ : Float range -π .. +π; Examples of constant declarations: Limit : constant Integer := 10_000; Low_Limit : constant Integer := Limit/10; Tolerance : constant Real := Dispersion(1.15); Hello_Msg : constant access String := Hello'Access; -- see 3.10.2 3.3.2 Number Declarations A number_declaration declares a named number. number_declaration ::= defining_identifier_list : constant := static_expression; Syntax 21/3 22 23/3 24 25 26 27/2 28 29/2 30 31/2 32 33/2 1 2 31 13 December 2012 Object Declarations 3.3.1 Ada Reference Manual — 2012 Edition 3 The static_expression given for a number_declaration is expected to be of any numeric type. Name Resolution Rules 4/3 The static_expression given for a number declaration shall be a static expression, as defined by subclause 4.9. Legality Rules 5 6 7 8 9 10/2 1/2 1.1/2 2/2 3/2 4 Static Semantics The named number denotes a value of type universal_integer if the type of the static_expression is an integer type. The named number denotes a value of type universal_real if the type of the static_- expression is a real type. The value denoted by the named number is the value of the static_expression, converted to the corresponding universal type. The elaboration of a number_declaration has no effect. Dynamic Semantics Examples of number declarations: Examples Two_Pi : constant := 2.0*Ada.Numerics.Pi; -- a real number (see A.5) Max : constant := 500; -- an integer number Max_Line_Size : constant := Max/6; -- the integer 83 Power_16 : constant := 2**16; -- the integer 65_536 One, Un, Eins : constant := 1; -- three different names for 1 3.4 Derived Types and Classes A derived_type_definition defines a derived type (and its first subtype) whose characteristics are derived from those of a parent type, and possibly from progenitor types. A class of types is a set of types that is closed under derivation; that is, if the parent or a progenitor type of a derived type belongs to a class, then so does the derived type. By saying that a particular group of types forms a class, we are saying that all derivatives of a type in the set inherit the characteristics that define that set. The more general term category of types is used for a set of types whose defining characteristics are not necessarily inherited by derivatives; for example, limited, abstract, and interface are all categories of types, but not classes of types. derived_type_definition ::= [abstract] [limited] new parent_subtype_indication [[and interface_list] record_extension_part] Syntax Legality Rules The parent_subtype_indication defines the parent subtype; its type is the parent type. The interface_list defines the progenitor types (see 3.9.4). A derived type has one parent type and zero or more progenitor types. A type shall be completely defined (see 3.11.1) prior to being specified as the parent type in a derived_type_definition — the full_type_declarations for the parent type and any of its subcomponents have to precede the derived_type_definition. 3.3.2 Number Declarations 13 December 2012 32 Ada Reference Manual — 2012 Edition If there is a record_extension_part, the derived type is called a record extension of the parent type. A record_extension_part shall be provided if and only if the parent type is a tagged type. An interface_list shall be provided only if the parent type is a tagged type. If the reserved word limited appears in a derived_type_definition, the parent type shall be a limited type. If the parent type is a tagged formal type, then in addition to the places where Legality Rules normally apply (see 12.3), this rule applies also in the private part of an instance of a generic unit. Static Semantics The first subtype of the derived type is unconstrained if a known_discriminant_part is provided in the declaration of the derived type, or if the parent subtype is unconstrained. Otherwise, the constraint of the first subtype corresponds to that of the parent subtype in the following sense: it is the same as that of the parent subtype except that for a range constraint (implicit or explicit), the value of each bound of its range is replaced by the corresponding value of the derived type. 5/2 5.1/3 6 The first subtype of the derived type excludes null (see 3.10) if and only if the parent subtype excludes null. 6.1/2 The characteristics and implicitly declared primitive subprograms of the derived type are defined as follows: • If the parent type or a progenitor type belongs to a class of types, then the derived type also belongs to that class. The following sets of types, as well as any higher-level sets composed from them, are classes in this sense, and hence the characteristics defining these classes are inherited by derived types from their parent or progenitor types: signed integer, modular integer, ordinary fixed, decimal fixed, floating point, enumeration, boolean, character, access-to- constant, general access-to-variable, pool-specific access-to-variable, access-to-subprogram, array, string, non-array composite, nonlimited, untagged record, tagged, task, protected, and synchronized tagged. • If the parent type is an elementary type or an array type, then the set of possible values of the derived type is a copy of the set of possible values of the parent type. For a scalar type, the base range of the derived type is the same as that of the parent type. • If the parent type is a composite type other than an array type, then the components, protected subprograms, and entries that are declared for the derived type are as follows: • The discriminants specified by a new known_discriminant_part, if there is one; otherwise, each discriminant of the parent type (implicitly declared in the same order with the same specifications) — in the latter case, the discriminants are said to be inherited, or if unknown in the parent, are also unknown in the derived type; • Each nondiscriminant component, entry, and protected subprogram of the parent type, implicitly declared in the same order with the same declarations; these components, entries, and protected subprograms are said to be inherited; • Each component declared in a record_extension_part, if any. Declarations of components, protected subprograms, and entries, whether implicit or explicit, occur immediately within the declarative region of the type, in the order indicated above, following the parent subtype_indication. 7/3 8/2 9 10 11 12 13 14 • This paragraph was deleted. • For each predefined operator of the parent type, there is a corresponding predefined operator of 15/2 16 the derived type. 33 13 December 2012 Derived Types and Classes 3.4 17/2 18/3 19 20 21 22/2 23/2 24 25 26 27/2 Ada Reference Manual — 2012 Edition • For each user-defined primitive subprogram (other than a user-defined equality operator — see below) of the parent type or of a progenitor type that already exists at the place of the derived_type_definition, there exists a corresponding inherited primitive subprogram of the derived type with the same defining name. Primitive user-defined equality operators of the parent type and any progenitor types are also inherited by the derived type, except when the derived type is a nonlimited record extension, and the inherited operator would have a profile that is type conformant with the profile of the corresponding predefined equality operator; in this case, the user-defined equality operator is not inherited, but is rather incorporated into the implementation of the predefined equality operator of the record extension (see 4.5.2). The profile of an inherited subprogram (including an inherited enumeration literal) is obtained from the profile of the corresponding (user-defined) primitive subprogram of the parent or progenitor type, after systematic replacement of each subtype of its profile (see 6.1) that is of the parent or progenitor type, other than those subtypes found in the designated profile of an access_definition, with a corresponding subtype of the derived type. For a given subtype of the parent or progenitor type, the corresponding subtype of the derived type is defined as follows: • If the declaration of the derived type has neither a known_discriminant_part nor a record_extension_part, then the corresponding subtype has a constraint that corresponds (as defined above for the first subtype of the derived type) to that of the given subtype. • If the derived type is a record extension, then the corresponding subtype is the first subtype of the derived type. • If the derived type has a new known_discriminant_part but is not a record extension, then the corresponding subtype is constrained to those values that when converted to the parent type belong to the given subtype (see 4.6). The same formal parameters have default_expressions in the profile of the inherited subprogram. Any type mismatch due to the systematic replacement of the parent or progenitor type by the derived type is handled as part of the normal type conversion associated with parameter passing — see 6.4.1. If a primitive subprogram of the parent or progenitor type is visible at the place of the derived_type_definition, then the corresponding inherited subprogram is implicitly declared immediately after the derived_type_definition. Otherwise, the inherited subprogram is implicitly declared later or not at all, as explained in 7.3.1. A derived type can also be defined by a private_extension_declaration (see 7.3) or a formal_derived_- type_definition (see 12.5.1). Such a derived type is a partial view of the corresponding full or actual type. All numeric types are derived types, in that they are implicitly derived from a corresponding root numeric type (see 3.5.4 and 3.5.6). Dynamic Semantics The elaboration of a derived_type_definition creates the derived type and its first subtype, and consists of the elaboration of the subtype_indication and the record_extension_part, if any. If the subtype_- indication depends on a discriminant, then only those expressions that do not depend on a discriminant are evaluated. For the execution of a call on an inherited subprogram, a call on the corresponding primitive subprogram of the parent or progenitor type is performed; the normal conversion of each actual parameter to the subtype of the corresponding formal parameter (see 6.4.1) performs any necessary type conversion as well. If the result type of the inherited subprogram is the derived type, the result of calling the subprogram of the parent or progenitor is converted to the derived type, or in the case of a null extension, extended to 3.4 Derived Types and Classes 13 December 2012 34 Ada Reference Manual — 2012 Edition the derived type using the equivalent of an extension_aggregate with the original result as the ancestor_part and null record as the record_component_association_list. NOTES 13 Classes are closed under derivation — any class that contains a type also contains its derivatives. Operations available for a given class of types are available for the derived types in that class. 14 Evaluating an inherited enumeration literal is equivalent to evaluating the corresponding enumeration literal of the parent type, and then converting the result to the derived type. This follows from their equivalence to parameterless functions. 15 A generic subprogram is not a subprogram, and hence cannot be a primitive subprogram and cannot be inherited by a derived type. On the other hand, an instance of a generic subprogram can be a primitive subprogram, and hence can be inherited. 16 If the parent type is an access type, then the parent and the derived type share the same storage pool; there is a null access value for the derived type and it is the implicit initial value for the type. See 3.10. 17 If the parent type is a boolean type, the predefined relational operators of the derived type deliver a result of the predefined type Boolean (see 4.5.2). If the parent type is an integer type, the right operand of the predefined exponentiation operator is of the predefined type Integer (see 4.5.6). 18 Any discriminants of the parent type are either all inherited, or completely replaced with a new set of discriminants. 19 For an inherited subprogram, the subtype of a formal parameter of the derived type need not have any value in common with the first subtype of the derived type. 20 If the reserved word abstract is given in the declaration of a type, the type is abstract (see 3.9.3). 21 An interface type that has a progenitor type “is derived from” that type. A derived_type_definition, however, never defines an interface type. 22 It is illegal for the parent type of a derived_type_definition to be a synchronized tagged type. Examples of derived type declarations: Examples type Local_Coordinate is new Coordinate; -- two different types type Midweek is new Day range Tue .. Thu; -- see 3.5.1 type Counter is new Positive; -- same range as Positive type Special_Key is new Key_Manager.Key; -- see 7.3.1 -- the inherited subprograms have the following specifications: -- procedure Get_Key(K : out Special_Key); -- function "<"(X,Y : Special_Key) return Boolean; 28 29 30 31 32 33 34 35 35.1/2 35.2/2 36 37 38 3.4.1 Derivation Classes In addition to the various language-defined classes of types, types can be grouped into derivation classes. 1 Static Semantics A derived type is derived from its parent type directly; it is derived indirectly from any type from which its parent type is derived. A derived type, interface type, type extension, task type, protected type, or formal derived type is also derived from every ancestor of each of its progenitor types, if any. The derivation class of types for a type T (also called the class rooted at T) is the set consisting of T (the root type of the class) and all types derived from T (directly or indirectly) plus any associated universal or class-wide types (defined below). Every type is either a specific type, a class-wide type, or a universal type. A specific type is one defined by a type_declaration, a formal_type_declaration, or a full type definition embedded in another construct. Class-wide and universal types are implicitly defined, to act as representatives for an entire class of types, as follows: 2/2 3/2 35 13 December 2012 Derived Types and Classes 3.4 Ada Reference Manual — 2012 Edition 4 Class-wide types 5 Class-wide types are defined for (and belong to) each derivation class rooted at a tagged type (see 3.9). Given a subtype S of a tagged type T, S'Class is the subtype_mark for a corresponding subtype of the tagged class-wide type T'Class. Such types are called “class- wide” because when a formal parameter is defined to be of a class-wide type T'Class, an actual parameter of any type in the derivation class rooted at T is acceptable (see 8.6). The set of values for a class-wide type T'Class is the discriminated union of the set of values of each specific type in the derivation class rooted at T (the tag acts as the implicit discriminant — see 3.9). Class-wide types have no primitive subprograms of their own. However, as explained in 3.9.2, operands of a class-wide type T'Class can be used as part of a dispatching call on a primitive subprogram of the type T. The only components (including discriminants) of T'Class that are visible are those of T. If S is a first subtype, then S'Class is a first subtype. 6/2 Universal types to in Universal types are defined for (and belong to) the integer, real, fixed point, and access classes, and are referred this standard as respectively, universal_integer, universal_real, universal_fixed, and universal_access. These are analogous to class-wide types for these language-defined elementary classes. As with class-wide types, if a formal parameter is of a universal type, then an actual parameter of any type in the corresponding class is acceptable. In addition, a value of a universal type (including an integer or real numeric_literal, or the literal null) is “universal” in that it is acceptable where some particular type in the class is expected (see 8.6). 7 8 9 10/2 11 12 13 14 The set of values of a universal type is the undiscriminated union of the set of values possible for any definable type in the associated class. Like class-wide types, universal types have no primitive subprograms of their own. However, their “universality” allows them to be used as operands with the primitive subprograms of any type in the corresponding class. The integer and real numeric classes each have a specific root type in addition to their universal type, named respectively root_integer and root_real. A class-wide or universal type is said to cover all of the types in its class. A specific type covers only itself. A specific type T2 is defined to be a descendant of a type T1 if T2 is the same as T1, or if T2 is derived (directly or indirectly) from T1. A class-wide type T2'Class is defined to be a descendant of type T1 if T2 is a descendant of T1. Similarly, the numeric universal types are defined to be descendants of the root types of their classes. If a type T2 is a descendant of a type T1, then T1 is called an ancestor of T2. An ultimate ancestor of a type is an ancestor of that type that is not itself a descendant of any other type. Every untagged type has a unique ultimate ancestor. An inherited component (including an inherited discriminant) of a derived type is inherited from a given ancestor of the type if the corresponding component was inherited by each derived type in the chain of derivations going back to the given ancestor. NOTES 23 Because operands of a universal type are acceptable to the predefined operators of any type in their class, ambiguity can result. For universal_integer and universal_real, this potential ambiguity is resolved by giving a preference (see 8.6) to the predefined operators of the corresponding root types (root_integer and root_real, respectively). Hence, in an apparently ambiguous expression like 1 + 4 < 7 where each of the literals is of type universal_integer, the predefined operators of root_integer will be preferred over those of other specific integer types, thereby resolving the ambiguity. 3.4.1 Derivation Classes 13 December 2012 36 Ada Reference Manual — 2012 Edition 3.5 Scalar Types Scalar types comprise enumeration types, integer types, and real types. Enumeration types and integer types are called discrete types; each value of a discrete type has a position number which is an integer value. Integer types and real types are called numeric types. All scalar types are ordered, that is, all relational operators are predefined for their values. range_constraint ::= range range range ::= range_attribute_reference | simple_expression .. simple_expression Syntax A range has a lower bound and an upper bound and specifies a subset of the values of some scalar type (the type of the range). A range with lower bound L and upper bound R is described by “L .. R”. If R is less than L, then the range is a null range, and specifies an empty set of values. Otherwise, the range specifies the values of the type from the lower bound to the upper bound, inclusive. A value belongs to a range if it is of the type of the range, and is in the subset of values specified by the range. A value satisfies a range constraint if it belongs to the associated range. One range is included in another if all values that belong to the first range also belong to the second. Name Resolution Rules For a subtype_indication containing a range_constraint, either directly or as part of some other scalar_constraint, the type of the range shall resolve to that of the type determined by the subtype_mark of the subtype_indication. For a range of a given type, the simple_expressions of the range (likewise, the simple_expressions of the equivalent range for a range_attribute_reference) are expected to be of the type of the range. Static Semantics The base range of a scalar type is the range of finite values of the type that can be represented in every unconstrained object of the type; it is also the range supported at a minimum for intermediate values during the evaluation of expressions involving predefined operators of the type. A constrained scalar subtype is one to which a range constraint applies. The range of a constrained scalar subtype is the range associated with the range constraint of the subtype. The range of an unconstrained scalar subtype is the base range of its type. Dynamic Semantics A range is compatible with a scalar subtype if and only if it is either a null range or each bound of the range belongs to the range of the subtype. A range_constraint is compatible with a scalar subtype if and only if its range is compatible with the subtype. The elaboration of a range_constraint consists of the evaluation of the range. The evaluation of a range determines a lower bound and an upper bound. If simple_expressions are given to specify bounds, the evaluation of the range evaluates these simple_expressions in an arbitrary order, and converts them to the type of the range. If a range_attribute_reference is given, the evaluation of the range consists of the evaluation of the range_attribute_reference. 1 2 3 4 5 6 7 8 9 37 13 December 2012 Scalar Types 3.5 Ada Reference Manual — 2012 Edition Attributes For every scalar subtype S, the following attributes are defined: S'First S'First denotes the lower bound of the range of S. The value of this attribute is of the type of S. 10 11 12 13 S'Last S'Last denotes the upper bound of the range of S. The value of this attribute is of the type of S. 14 15 16 17 18 19 20 21 22 23 24 25 26 27 S'Range S'Range is equivalent to the range S'First .. S'Last. S'Base S'Base denotes an unconstrained subtype of the type of S. This unconstrained subtype is called the base subtype of the type. S'Min S'Min denotes a function with the following specification: function S'Min(Left, Right : S'Base) return S'Base The function returns the lesser of the values of the two parameters. S'Max S'Max denotes a function with the following specification: function S'Max(Left, Right : S'Base) return S'Base The function returns the greater of the values of the two parameters. S'Succ S'Succ denotes a function with the following specification: function S'Succ(Arg : S'Base) return S'Base For an enumeration type, the function returns the value whose position number is one more than that of the value of Arg; Constraint_Error is raised if there is no such value of the type. For an integer type, the function returns the result of adding one to the value of Arg. For a fixed point type, the function returns the result of adding small to the value of Arg. For a floating point type, the function returns the machine number (as defined in 3.5.7) immediately above the value of Arg; Constraint_Error is raised if there is no such machine number. S'Pred S'Pred denotes a function with the following specification: function S'Pred(Arg : S'Base) return S'Base For an enumeration type, the function returns the value whose position number is one less than that of the value of Arg; Constraint_Error is raised if there is no such value of the type. For an integer type, the function returns the result of subtracting one from the value of Arg. For a fixed point type, the function returns the result of subtracting small from the value of Arg. For a floating point type, the function returns the machine number (as defined in 3.5.7) immediately below the value of Arg; Constraint_Error is raised if there is no such machine number. 27.1/2 S'Wide_Wide_Image 27.2/2 27.3/2 27.4/2 S'Wide_Wide_Image denotes a function with the following specification: function S'Wide_Wide_Image(Arg : S'Base) return Wide_Wide_String The function returns an image of the value of Arg, that is, a sequence of characters representing the value in display form. The lower bound of the result is one. The image of an integer value is the corresponding decimal literal, without underlines, leading zeros, exponent, or trailing spaces, but with a single leading character that is either a minus sign or a space. 3.5 Scalar Types 13 December 2012 38 Ada Reference Manual — 2012 Edition The image of an enumeration value is either the corresponding identifier in upper case or the corresponding character literal (including the two apostrophes); neither leading nor trailing spaces are included. For a nongraphic character (a value of a character type that has no enumeration literal associated with it), the result is a corresponding language- defined name in upper case (for example, the image of the nongraphic character identified as nul is “NUL” — the quotes are not part of the image). The image of a floating point value is a decimal real literal best approximating the value (rounded away from zero if halfway between) with a single leading character that is either a minus sign or a space, a single digit (that is nonzero unless the value is zero), a decimal point, S'Digits–1 (see 3.5.8) digits after the decimal point (but one if S'Digits is one), an upper case E, the sign of the exponent (either + or –), and two or more digits (with leading zeros if necessary) representing the exponent. If S'Signed_Zeros is True, then the leading character is a minus sign for a negatively signed zero. 27.5/2 27.6/2 The image of a fixed point value is a decimal real literal best approximating the value (rounded away from zero if halfway between) with a single leading character that is either a minus sign or a space, one or more digits before the decimal point (with no redundant leading zeros), a decimal point, and S'Aft (see 3.5.10) digits after the decimal point. 27.7/2 S'Wide_Image S'Wide_Image denotes a function with the following specification: function S'Wide_Image(Arg : S'Base) return Wide_String The function returns an image of the value of Arg as a Wide_String. The lower bound of the result is one. The image has the same sequence of graphic characters as defined for S'Wide_Wide_Image if all the graphic characters are defined in Wide_Character; otherwise, the sequence of characters is implementation defined (but no shorter than that of S'Wide_Wide_Image for the same value of Arg). Paragraphs 31 through 34 were moved to Wide_Wide_Image. S'Image S'Image denotes a function with the following specification: function S'Image(Arg : S'Base) return String The function returns an image of the value of Arg as a String. The lower bound of the result is one. The image has the same sequence of graphic characters as that defined for S'Wide_Wide_Image if all the graphic characters are defined in Character; otherwise, the sequence of characters that of S'Wide_Wide_Image for the same value of Arg). implementation defined (but no shorter than is S'Wide_Wide_Width S'Wide_Wide_Width denotes the maximum length of a Wide_Wide_String returned by S'Wide_Wide_Image over all values of the subtype S. It denotes zero for a subtype that has a null range. Its type is universal_integer. S'Wide_Width S'Wide_Width denotes the maximum length of a Wide_String returned by S'Wide_Image over all values of the subtype S. It denotes zero for a subtype that has a null range. Its type is universal_integer. S'Width S'Width denotes the maximum length of a String returned by S'Image over all values of the subtype S. It denotes zero for a subtype that has a null range. Its type is universal_integer. S'Wide_Wide_Value S'Wide_Wide_Value denotes a function with the following specification: function S'Wide_Wide_Value(Arg : Wide_Wide_String) return S'Base 39 13 December 2012 Scalar Types 3.5 28 29 30/3 35 36 37/3 37.1/2 38 39 39.1/2 39.2/2 Ada Reference Manual — 2012 Edition 39.3/2 39.4/3 39.5/3 39.6/2 39.7/2 39.8/2 39.9/2 39.10/2 39.11/2 39.12/3 This function returns a value given an image of the value as a Wide_Wide_String, ignoring any leading or trailing spaces. For the evaluation of a call on S'Wide_Wide_Value for an enumeration subtype S, if the sequence of characters of the parameter (ignoring leading and trailing spaces) has the syntax of an enumeration literal and if it corresponds to a literal of the type of S (or corresponds to the result of S'Wide_Wide_Image for a nongraphic character of the type), the result is the corresponding enumeration value; otherwise, Constraint_Error is raised. For the evaluation of a call on S'Wide_Wide_Value for an integer subtype S, if the sequence of characters of the parameter (ignoring leading and trailing spaces) has the syntax of an integer literal, with an optional leading sign character (plus or minus for a signed type; only plus for a modular type), and the corresponding numeric value belongs to the base range of the type of S, then that value is the result; otherwise, Constraint_Error is raised. For the evaluation of a call on S'Wide_Wide_Value for a real subtype S, if the sequence of characters of the parameter (ignoring leading and trailing spaces) has the syntax of one of the following: • numeric_literal • numeral.[exponent] • • base#based_numeral.#[exponent] • base#.based_numeral#[exponent] .numeral[exponent] with an optional leading sign character (plus or minus), and if the corresponding numeric value belongs to the base range of the type of S, then that value is the result; otherwise, Constraint_Error is raised. The sign of a zero value is preserved (positive if none has been specified) if S'Signed_Zeros is True. 40 S'Wide_Value 41 42 43/3 52 53 54 55/3 S'Wide_Value denotes a function with the following specification: function S'Wide_Value(Arg : Wide_String) return S'Base This function returns a value given an image of the value as a Wide_String, ignoring any leading or trailing spaces. For the evaluation of a call on S'Wide_Value for an enumeration subtype S, if the sequence of characters of the parameter (ignoring leading and trailing spaces) has the syntax of an enumeration literal and if it corresponds to a literal of the type of S (or corresponds to the result of S'Wide_Image for a value of the type), the result is the corresponding enumeration value; otherwise, Constraint_Error is raised. For a numeric subtype S, the evaluation of a call on S'Wide_Value with Arg of type Wide_String is equivalent to a call on S'Wide_Wide_Value for a corresponding Arg of type Wide_Wide_String. Paragraphs 44 through 51 were moved to Wide_Wide_Value. S'Value S'Value denotes a function with the following specification: function S'Value(Arg : String) return S'Base This function returns a value given an image of the value as a String, ignoring any leading or trailing spaces. For the evaluation of a call on S'Value for an enumeration subtype S, if the sequence of characters of the parameter (ignoring leading and trailing spaces) has the syntax of an 3.5 Scalar Types 13 December 2012 40 Ada Reference Manual — 2012 Edition enumeration literal and if it corresponds to a literal of the type of S (or corresponds to the result of S'Image for a value of the type), the result is the corresponding enumeration value; otherwise, Constraint_Error is raised. For a numeric subtype S, the evaluation of a call on S'Value with Arg of type String is equivalent to a call on S'Wide_Wide_Value for a corresponding Arg of type Wide_Wide_String. Implementation Permissions An implementation may extend the Wide_Wide_Value, Wide_Value, Value, Wide_Wide_Image, Wide_Image, and Image attributes of a floating point type to support special values such as infinities and NaNs. 56/2 An implementation may extend the Wide_Wide_Value, Wide_Value, and Value attributes of a character type to accept strings of the form “Hex_hhhhhhhh” (ignoring case) for any character (not just the ones for which Wide_Wide_Image would produce that form — see 3.5.2), as well as three-character strings of the form “'X'”, where X is any character, including nongraphic characters. 56.1/3 For a scalar type, the following language-defined representation aspect may be specified with an aspect_specification (see 13.1.1): Static Semantics Default_Value This aspect shall be specified by a static expression, and that expression shall be explicit, even if the aspect has a boolean type. Default_Value shall be specified only on a full_type_declaration. 56.2/3 56.3/3 If a derived type with no primitive subprograms inherits a boolean Default_Value aspect, the aspect may be specified to have any value for the derived type. 56.4/3 The expected type for the expression specified for the Default_Value aspect is the type defined by the full_type_declaration on which it appears. 56.5/3 Name Resolution Rules NOTES 24 The evaluation of S'First or S'Last never raises an exception. If a scalar subtype S has a nonnull range, S'First and S'Last belong to this range. These values can, for example, always be assigned to a variable of subtype S. 25 For a subtype of a scalar type, the result delivered by the attributes Succ, Pred, and Value might not belong to the subtype; similarly, the actual parameters of the attributes Succ, Pred, and Image need not belong to the subtype. 26 For any value V (including any nongraphic character) of an enumeration subtype S, S'Value(S'Image(V)) equals V, as do S'Wide_Value(S'Wide_Image(V)) and S'Wide_Wide_Value(S'Wide_Wide_Image(V)). None of these expressions ever raise Constraint_Error. Examples Examples of ranges: -10 .. 10 X .. X + 1 0.0 .. 2.0*Pi Red .. Green -- see 3.5.1 1 .. 0 -- a null range Table'Range -- a range attribute reference (see 3.6) Examples of range constraints: range -999.0 .. +999.0 range S'First+1 .. S'Last-1 57 58 59 60 61 62 63 41 13 December 2012 Scalar Types 3.5 Ada Reference Manual — 2012 Edition 3.5.1 Enumeration Types An enumeration_type_definition defines an enumeration type. Syntax enumeration_type_definition ::= (enumeration_literal_specification {, enumeration_literal_specification}) enumeration_literal_specification ::= defining_identifier | defining_character_literal defining_character_literal ::= character_literal 1 2 3 4 5/3 The defining_identifiers enumeration_type_definition shall be distinct. in upper case and the defining_character_literals listed in an Legality Rules 6/3 Each enumeration_literal_specification is the explicit declaration of the corresponding enumeration literal: it declares a parameterless function, whose defining name is the defining_identifier or defining_- character_literal, and whose result subtype is the base subtype of the enumeration type. Static Semantics 7 8 9 10 11 12 13 14 Each enumeration literal corresponds to a distinct value of the enumeration type, and to a distinct position number. The position number of the value of the first listed enumeration literal is zero; the position number of the value of each subsequent enumeration literal is one more than that of its predecessor in the list. The predefined order relations between values of the enumeration type follow the order of corresponding position numbers. If the same defining_identifier or defining_character_literal is specified in more than one enumeration_- type_definition, the corresponding enumeration literals are said to be overloaded. At any place where an overloaded enumeration literal occurs in the text of a program, the type of the enumeration literal has to be determinable from the context (see 8.6). Dynamic Semantics The elaboration of an enumeration_type_definition creates the enumeration type and its first subtype, which is constrained to the base range of the type. When called, the parameterless function associated with an enumeration literal returns the corresponding value of the enumeration type. NOTES 27 If an enumeration literal occurs in a context that does not otherwise suffice to determine the type of the literal, then qualification by the name of the enumeration type is one way to resolve the ambiguity (see 4.7). Examples of enumeration types and subtypes: Examples type Day is (Mon, Tue, Wed, Thu, Fri, Sat, Sun); type Suit is (Clubs, Diamonds, Hearts, Spades); type Gender is (M, F); type Level is (Low, Medium, Urgent); type Color is (White, Red, Yellow, Green, Blue, Brown, Black); type Light is (Red, Amber, Green); -- Red and Green are overloaded 3.5.1 Enumeration Types 13 December 2012 42 Ada Reference Manual — 2012 Edition type Hexa is ('A', 'B', 'C', 'D', 'E', 'F'); type Mixed is ('A', 'B', '*', B, None, '?', '%'); subtype Weekday is Day range Mon .. Fri; subtype Major is Suit range Hearts .. Spades; subtype Rainbow is Color range Red .. Blue; -- the Color Red, not the Light 3.5.2 Character Types Static Semantics An enumeration type is said to be a character type if at least one of its enumeration literals is a character_literal. The predefined type Character is a character type whose values correspond to the 256 code points of Row 00 (also known as Latin-1) of the ISO/IEC 10646:2011 Basic Multilingual Plane (BMP). Each of the graphic characters of Row 00 of the BMP has a corresponding character_literal in Character. Each of the nongraphic characters of Row 00 has a corresponding language-defined name, which is not usable as an enumeration literal, but which is usable with the attributes Image, Wide_Image, Wide_Wide_Image, Value, Wide_Value, and Wide_Wide_Value; these names are given in the definition of type Character in A.1, “The Package Standard”, but are set in italics. The predefined type Wide_Character is a character type whose values correspond to the 65536 code points of the ISO/IEC 10646:2011 Basic Multilingual Plane (BMP). Each of the graphic characters of the BMP has a corresponding character_literal in Wide_Character. The first 256 values of Wide_Character have the same character_literal or language-defined name as defined for Character. Each of the graphic_characters has a corresponding character_literal. The predefined type Wide_Wide_Character is a character type whose values correspond to the 2147483648 code points of the ISO/IEC 10646:2011 character set. Each of the graphic_characters has a of corresponding Wide_Wide_Character have the same character_literal or language-defined name as defined for Wide_Character. in Wide_Wide_Character. The character_literal values 65536 first The characters whose code point is larger than 16#FF# and which are not graphic_characters have language-defined names which are formed by appending to the string "Hex_" the representation of their code point in hexadecimal as eight extended digits. As with other language-defined names, these names are usable only with the attributes (Wide_)Wide_Image and (Wide_)Wide_Value; they are not usable as enumeration literals. Paragraphs 6 and 7 were deleted. NOTES 28 The language-defined library package Characters.Latin_1 (see A.3.3) includes the declaration of constants denoting control characters, lower case characters, and special characters of the predefined type Character. 29 A conventional character set such as EBCDIC can be declared as a character type; the internal codes of the characters can be specified by an enumeration_representation_clause as explained in subclause 13.4. Example of a character type: type Roman_Digit is ('I', 'V', 'X', 'L', 'C', 'D', 'M'); Examples 43 13 December 2012 Enumeration Types 3.5.1 15 16 1 2/3 3/3 4/3 5/3 8 9/3 10 11 Ada Reference Manual — 2012 Edition 3.5.3 Boolean Types 1 1 2 3 4 5 6 7 8 9 10 11 There is a predefined enumeration type named Boolean, declared in the visible part of package Standard. It has the two enumeration literals False and True ordered with the relation False < True. Any descendant of the predefined type Boolean is called a boolean type. Static Semantics 3.5.4 Integer Types An integer_type_definition defines an integer type; it defines either a signed integer type, or a modular integer type. The base range of a signed integer type includes at least the values of the specified range. A modular type is an integer type with all arithmetic modulo a specified positive modulus; such a type corresponds to an unsigned type with wrap-around semantics. integer_type_definition ::= signed_integer_type_definition | modular_type_definition signed_integer_type_definition ::= range static_simple_expression .. static_simple_expression modular_type_definition ::= mod static_expression Syntax Each simple_expression in a signed_integer_type_definition is expected to be of any integer type; they need not be of the same type. The expression in a modular_type_definition is likewise expected to be of any integer type. Name Resolution Rules Legality Rules The simple_expressions of a signed_integer_type_definition shall be static, and their values shall be in the range System.Min_Int .. System.Max_Int. The expression of a modular_type_definition shall be static, and its value (the modulus) shall be positive, and shall be no greater than System.Max_Binary_Modulus if a power of 2, or no greater than System.Max_Nonbinary_Modulus if not. Static Semantics The set of values for a signed integer type is the (infinite) set of mathematical integers, though only values of the base range of the type are fully supported for run-time operations. The set of values for a modular integer type are the values from 0 to one less than the modulus, inclusive. A signed_integer_type_definition defines an integer type whose base range includes at least the values of the simple_expressions and is symmetric about zero, excepting possibly an extra negative value. A signed_integer_type_definition also defines a constrained first subtype of the type, with a range whose bounds are given by the values of the simple_expressions, converted to the type being defined. A modular_type_definition defines a modular type whose base range is from zero to one less than the given modulus. A modular_type_definition also defines a constrained first subtype of the type with a range that is the same as the base range of the type. There is a predefined signed integer subtype named Integer, declared in the visible part of package Standard. It is constrained to the base range of its type. 3.5.3 Boolean Types 13 December 2012 44 Ada Reference Manual — 2012 Edition Integer has two predefined subtypes, declared in the visible part of package Standard: subtype Natural is Integer range 0 .. Integer'Last; subtype Positive is Integer range 1 .. Integer'Last; A type defined by an integer_type_definition is implicitly derived from root_integer, an anonymous predefined (specific) integer type, whose base range is System.Min_Int .. System.Max_Int. However, the base range of the new type is not inherited from root_integer, but is instead determined by the range or modulus specified by the integer_type_definition. Integer literals are all of the type universal_integer, the universal type (see 3.4.1) for the class rooted at root_integer, allowing their use with the operations of any integer type. The position number of an integer value is equal to the value. For every modular subtype S, the following attributes are defined: S'Mod S'Mod denotes a function with the following specification: function S'Mod (Arg : universal_integer) return S'Base This function returns Arg mod S'Modulus, as a value of the type of S. S'Modulus S'Modulus yields the modulus of the type of S, as a value of the type universal_integer. The elaboration of an integer_type_definition creates the integer type and its first subtype. Dynamic Semantics For a modular type, if the result of the execution of a predefined operator (see 4.5) is outside the base range of the type, the result is reduced modulo the modulus of the type to a value that is within the base range of the type. For a signed integer type, the exception Constraint_Error is raised by the execution of an operation that cannot deliver the correct result because it is outside the base range of the type. For any integer type, Constraint_Error is raised by the operators "/", "rem", and "mod" if the right operand is zero. In an implementation, the range of Integer shall include the range –2**15+1 .. +2**15–1. Implementation Requirements If Long_Integer is predefined for an implementation, then its range shall include the range –2**31+1 .. +2**31–1. System.Max_Binary_Modulus shall be at least 2**16. Implementation Permissions For the execution of a predefined operation of a signed integer type, the implementation need not raise Constraint_Error if the result is outside the base range of the type, so long as the correct result is produced. An implementation may provide additional predefined signed integer types, declared in the visible part of Standard, whose first subtypes have names of the form Short_Integer, Long_Integer, Short_Short_Integer, Long_Long_Integer, etc. Different predefined integer types are allowed to have the same base range. However, the range of Integer should be no wider than that of Long_Integer. Similarly, the range of Short_Integer (if provided) should be no wider than Integer. Corresponding recommendations apply to any other predefined integer types. There need not be a named integer type corresponding to each distinct base range supported by an implementation. The range of each first subtype should be the base range of its type. 12 13 14 15 16/2 16.1/2 16.2/2 16.3/2 17 18 19 20 21 22 23 24 25 45 13 December 2012 Integer Types 3.5.4 Ada Reference Manual — 2012 Edition 26 An implementation may provide nonstandard integer types, descendants of root_integer that are declared outside of the specification of package Standard, which need not have all the standard characteristics of a type defined by an integer_type_definition. For example, a nonstandard integer type might have an asymmetric base range or it might not be allowed as an array or loop index (a very long integer). Any type descended from a nonstandard integer type is also nonstandard. An implementation may place arbitrary restrictions on the use of such types; it is implementation defined whether operators that are predefined for “any integer type” are defined for a particular nonstandard integer type. In any case, such types are not permitted as explicit_generic_actual_parameters for formal scalar types — see 12.5.2. 27 For a one's complement machine, the high bound of the base range of a modular type whose modulus is one less than a power of 2 may be equal to the modulus, rather than one less than the modulus. It is implementation defined for which powers of 2, if any, this permission is exercised. 27.1/1 For a one's complement machine, implementations may support nonbinary modulus values greater than System.Max_Nonbinary_Modulus. It is implementation defined which specific values greater than System.Max_Nonbinary_Modulus, if any, are supported. 28 29 30 31 32 33 34 35 36 Implementation Advice An implementation should support Long_Integer in addition to Integer if the target machine supports 32- bit (or longer) arithmetic. No other named integer subtypes are recommended for package Standard. Instead, appropriate named integer subtypes should be provided in the library package Interfaces (see B.2). An implementation for a two's complement machine should support modular types with a binary modulus up to System.Max_Int*2+2. An implementation should support a nonbinary modulus up to Integer'Last. NOTES 30 Integer literals are of the anonymous predefined integer type universal_integer. Other integer types have no literals. However, the overload resolution rules (see 8.6, “The Context of Overload Resolution”) allow expressions of the type universal_integer whenever an integer type is expected. 31 The same arithmetic operators are predefined for all signed integer types defined by a signed_integer_type_definition (see 4.5, “Operators and Expression Evaluation”). For modular types, these same operators are predefined, plus bit-wise logical operators (and, or, xor, and not). In addition, for the unsigned types declared in the language-defined package Interfaces (see B.2), functions are defined that provide bit-wise shifting and rotating. 32 Modular types match a generic_formal_parameter_declaration of the form "type T is mod <>;"; signed integer types match "type T is range <>;" (see 12.5.2). Examples of integer types and subtypes: Examples type Page_Num is range 1 .. 2_000; type Line_Size is range 1 .. Max_Line_Size; subtype Small_Int is Integer range -10 .. 10; subtype Column_Ptr is Line_Size range 1 .. 10; subtype Buffer_Size is Integer range 0 .. Max; type Byte is mod 256; -- an unsigned byte type Hash_Index is mod 97; -- modulus is prime 3.5.4 Integer Types 13 December 2012 46 Ada Reference Manual — 2012 Edition 3.5.5 Operations of Discrete Types For every discrete subtype S, the following attributes are defined: S'Pos S'Pos denotes a function with the following specification: Static Semantics function S'Pos(Arg : S'Base) return universal_integer This function returns the position number of the value of Arg, as a value of type universal_integer. S'Val S'Val denotes a function with the following specification: function S'Val(Arg : universal_integer) return S'Base This function returns a value of the type of S whose position number equals the value of Arg. For the evaluation of a call on S'Val, if there is no value in the base range of its type with the given position number, Constraint_Error is raised. For every static discrete subtype S for which there exists at least one value belonging to S that satisfies any predicate of S, the following attributes are defined: S'First_Valid S'Last_Valid S'First_Valid denotes the smallest value that belongs to S and satisfies the predicate of S. The value of this attribute is of the type of S. 1 2 3 4 5 6 7 7.1/3 7.2/3 7.3/3 S'Last_Valid denotes the largest value that belongs to S and satisfies the predicate of S. The value of this attribute is of the type of S. First_Valid and Last_Valid attribute_references are always static expressions. Any explicit predicate of S can only have been specified by a Static_Predicate aspect. 7.4/3 Implementation Advice For the evaluation of a call on S'Pos for an enumeration subtype, if the value of the operand does not correspond to the internal code for any enumeration literal of its type (perhaps due to an uninitialized variable), then the implementation should raise Program_Error. This is particularly important for enumeration types with noncontiguous internal codes specified by an enumeration_representation_- clause. NOTES 33 Indexing and loop iteration use values of discrete types. 34 The predefined operations of a discrete type include the assignment operation, qualification, the membership tests, and the relational operators; for a boolean type they include the short-circuit control forms and the logical operators; for an integer type they include type conversion to and from other numeric types, as well as the binary and unary adding operators – and +, the multiplying operators, the unary operator abs, and the exponentiation operator. The assignment operation is described in 5.2. The other predefined operations are described in Clause 4. 35 As for all types, objects of a discrete type have Size and Address attributes (see 13.3). 36 For a subtype of a discrete type, the result delivered by the attribute Val might not belong to the subtype; similarly, the actual parameter of the attribute Pos need not belong to the subtype. The following relations are satisfied (in the absence of an exception) by these attributes: S'Val(S'Pos(X)) = X S'Pos(S'Val(N)) = N 8 9 10/3 11 12 13 47 13 December 2012 Operations of Discrete Types 3.5.5 14 15 16 17 1 2 3 4 5 6 7/2 8 Ada Reference Manual — 2012 Edition Examples of attributes of discrete subtypes: Examples -- For the types and subtypes declared in subclause 3.5.1 the following hold: -- Color'First = White, Color'Last = Black -- Rainbow'First = Red, Rainbow'Last = Blue -- Color'Succ(Blue) = Rainbow'Succ(Blue) = Brown -- Color'Pos(Blue) = Rainbow'Pos(Blue) = 4 -- Color'Val(0) = Rainbow'Val(0) = White 3.5.6 Real Types Real types provide approximations to the real numbers, with relative bounds on errors for floating point types, and with absolute bounds for fixed point types. real_type_definition ::= floating_point_definition | fixed_point_definition Syntax Static Semantics A type defined by a real_type_definition is implicitly derived from root_real, an anonymous predefined (specific) real type. Hence, all real types, whether floating point or fixed point, are in the derivation class rooted at root_real. Real literals are all of the type universal_real, the universal type (see 3.4.1) for the class rooted at root_real, allowing their use with the operations of any real type. Certain multiplying operators have a result type of universal_fixed (see 4.5.5), the universal type for the class of fixed point types, allowing the result of the multiplication or division to be used where any specific fixed point type is expected. The elaboration of a real_type_definition consists of the elaboration of the floating_point_definition or the fixed_point_definition. Dynamic Semantics An implementation shall perform the run-time evaluation of a use of a predefined operator of root_real with an accuracy at least as great as that of any floating point type definable by a floating_point_definition. Implementation Requirements Implementation Permissions For the execution of a predefined operation of a real type, the implementation need not raise Constraint_Error if the result is outside the base range of the type, so long as the correct result is produced, or the Machine_Overflows attribute of the type is False (see G.2). An implementation may provide nonstandard real types, descendants of root_real that are declared outside of the specification of package Standard, which need not have all the standard characteristics of a type defined by a real_type_definition. For example, a nonstandard real type might have an asymmetric or unsigned base range, or its predefined operations might wrap around or “saturate” rather than overflow (modular or saturating arithmetic), or it might not conform to the accuracy model (see G.2). Any type descended from a nonstandard real type is also nonstandard. An implementation may place arbitrary restrictions on the use of such types; it is implementation defined whether operators that are predefined for “any real type” are defined for a particular nonstandard real type. In any case, such types are not permitted as explicit_generic_actual_parameters for formal scalar types — see 12.5.2. 3.5.5 Operations of Discrete Types 13 December 2012 48 Ada Reference Manual — 2012 Edition NOTES 37 As stated, real literals are of the anonymous predefined real type universal_real. Other real types have no literals. However, the overload resolution rules (see 8.6) allow expressions of the type universal_real whenever a real type is expected. 3.5.7 Floating Point Types For floating point types, the error bound is specified as a relative precision by giving the required minimum number of significant decimal digits. Syntax floating_point_definition ::= digits static_expression [real_range_specification] real_range_specification ::= range static_simple_expression .. static_simple_expression Name Resolution Rules The requested decimal precision, which is the minimum number of significant decimal digits required for the floating point type, is specified by the value of the expression given after the reserved word digits. This expression is expected to be of any integer type. Each simple_expression of a real_range_specification is expected to be of any real type; the types need not be the same. Legality Rules The requested decimal precision shall be specified by a static expression whose value is positive and no greater than System.Max_Base_Digits. Each simple_expression of a real_range_specification shall also be static. If the real_range_specification is omitted, the requested decimal precision shall be no greater than System.Max_Digits. A floating_point_definition is illegal if the implementation does not support a floating point type that satisfies the requested decimal precision and range. Static Semantics The set of values for a floating point type is the (infinite) set of rational numbers. The machine numbers of a floating point type are the values of the type that can be represented exactly in every unconstrained variable of the type. The base range (see 3.5) of a floating point type is symmetric around zero, except that it can include some extra negative values in some implementations. The base decimal precision of a floating point type is the number of decimal digits of precision representable in objects of the type. The safe range of a floating point type is that part of its base range for which the accuracy corresponding to the base decimal precision is preserved by all predefined operations. 9 1 2 3 4 5 6 7 8 9 A floating_point_definition defines a floating point type whose base decimal precision is no less than the requested decimal precision. If a real_range_specification is given, the safe range of the floating point type (and hence, also its base range) includes at least the values of the simple expressions given in the real_range_specification. If a real_range_specification is not given, the safe (and base) range of the type includes at least the values of the range –10.0**(4*D) .. +10.0**(4*D) where D is the requested decimal precision. The safe range might include other values as well. The attributes Safe_First and Safe_Last give the actual bounds of the safe range. 10 49 13 December 2012 Real Types 3.5.6 Ada Reference Manual — 2012 Edition 11 A floating_point_definition also defines a first subtype of the type. If a real_range_specification is given, then the subtype is constrained to a range whose bounds are given by a conversion of the values of the simple_expressions of the real_range_specification to the type being defined. Otherwise, the subtype is unconstrained. 12 There is a predefined, unconstrained, floating point subtype named Float, declared in the visible part of package Standard. 13 The elaboration of a floating_point_definition creates the floating point type and its first subtype. Dynamic Semantics Implementation Requirements In an implementation that supports floating point types with 6 or more digits of precision, the requested decimal precision for Float shall be at least 6. If Long_Float is predefined for an implementation, then its requested decimal precision shall be at least 11. Implementation Permissions An implementation is allowed to provide additional predefined floating point types, declared in the visible part of Standard, whose (unconstrained) first subtypes have names of the form Short_Float, Long_Float, Short_Short_Float, Long_Long_Float, etc. Different predefined floating point types are allowed to have the same base decimal precision. However, the precision of Float should be no greater than that of Long_Float. Similarly, the precision of Short_Float (if provided) should be no greater than Float. Corresponding recommendations apply to any other predefined floating point types. There need not be a named floating point type corresponding to each distinct base decimal precision supported by an implementation. Implementation Advice An implementation should support Long_Float in addition to Float if the target machine supports 11 or more digits of precision. No other named floating point subtypes are recommended for package Standard. Instead, appropriate named floating point subtypes should be provided in the library package Interfaces (see B.2). NOTES 38 If a floating point subtype is unconstrained, then assignments to variables of the subtype involve only Overflow_Checks, never Range_Checks. Examples of floating point types and subtypes: Examples type Coefficient is digits 10 range -1.0 .. 1.0; type Real is digits 8; type Mass is digits 7 range 0.0 .. 1.0E35; subtype Probability is Real range 0.0 .. 1.0; -- a subtype with a smaller range 14 15 16 17 18 19 20 21 22 3.5.7 Floating Point Types 13 December 2012 50 Ada Reference Manual — 2012 Edition 3.5.8 Operations of Floating Point Types The following attribute is defined for every floating point subtype S: Static Semantics S'Digits S'Digits denotes the requested decimal precision for the subtype S. The value of this attribute is of the type universal_integer. The requested decimal precision of the base subtype of a floating point type T is defined to be the largest value of d for which ceiling(d * log(10) / log(T'Machine_Radix)) + g <= T'Model_Mantissa where g is 0 if Machine_Radix is a positive power of 10 and 1 otherwise. NOTES 39 The predefined operations of a floating point type include the assignment operation, qualification, the membership tests, and explicit conversion to and from other numeric types. They also include the relational operators and the following predefined arithmetic operators: the binary and unary adding operators – and +, certain multiplying operators, the unary operator abs, and the exponentiation operator. 40 As for all types, objects of a floating point type have Size and Address attributes (see 13.3). Other attributes of floating point types are defined in A.5.3. 3.5.9 Fixed Point Types A fixed point type is either an ordinary fixed point type, or a decimal fixed point type. The error bound of a fixed point type is specified as an absolute value, called the delta of the fixed point type. fixed_point_definition ::= ordinary_fixed_point_definition | decimal_fixed_point_definition Syntax ordinary_fixed_point_definition ::= delta static_expression real_range_specification decimal_fixed_point_definition ::= delta static_expression digits static_expression [real_range_specification] digits_constraint ::= digits static_expression [range_constraint] Name Resolution Rules For a type defined by a fixed_point_definition, the delta of the type is specified by the value of the expression given after the reserved word delta; this expression is expected to be of any real type. For a type defined by a decimal_fixed_point_definition (a decimal fixed point type), the number of significant decimal digits for its first subtype (the digits of the first subtype) is specified by the expression given after the reserved word digits; this expression is expected to be of any integer type. Legality Rules In a fixed_point_definition or digits_constraint, the expressions given after the reserved words delta and digits shall be static; their values shall be positive. The set of values of a fixed point type comprise the integral multiples of a number called the small of the type. The machine numbers of a fixed point type are the values of the type that can be represented exactly in every unconstrained variable of the type. For a type defined by an ordinary_fixed_point_definition (an ordinary fixed point type), the small may be specified by an attribute_definition_clause (see 13.3); if so specified, it shall be no greater than the delta of the type. If not specified, the small of an ordinary fixed point type is an implementation-defined power of two less than or equal to the delta. 1 2/1 3 4 1 2 3 4 5 6 7 8/2 51 13 December 2012 Operations of Floating Point Types 3.5.8 Ada Reference Manual — 2012 Edition 9 10 11 12 13 14 15 16 17 18 19 For a decimal fixed point type, the small equals the delta; the delta shall be a power of 10. If a real_range_specification is given, both bounds of the range shall be in the range –(10**digits–1)*delta .. +(10**digits–1)*delta. A fixed_point_definition is illegal if the implementation does not support a fixed point type with the given small and specified range or digits. For a subtype_indication with a digits_constraint, the subtype_mark shall denote a decimal fixed point subtype. Static Semantics The base range (see 3.5) of a fixed point type is symmetric around zero, except possibly for an extra negative value in some implementations. An ordinary_fixed_point_definition defines an ordinary fixed point type whose base range includes at least all multiples of small that are between the bounds specified in the real_range_specification. The base range of the type does not necessarily include the specified bounds themselves. An ordinary_fixed_point_- definition also defines a constrained first subtype of the type, with each bound of its range given by the closer to zero of: • • the value of the conversion to the fixed point type of the corresponding expression of the real_range_specification; the corresponding bound of the base range. A decimal_fixed_point_definition defines a decimal fixed point type whose base range includes at least the range –(10**digits–1)*delta .. +(10**digits–1)*delta. A decimal_fixed_point_definition also defines a constrained first subtype of the type. If a real_range_specification is given, the bounds of the first subtype are given by a conversion of the values of the expressions of the real_range_specification. Otherwise, the range of the first subtype is –(10**digits–1)*delta .. +(10**digits–1)*delta. The elaboration of a fixed_point_definition creates the fixed point type and its first subtype. Dynamic Semantics For a digits_constraint on a decimal fixed point subtype with a given delta, if it does not have a range_constraint, then it specifies an implicit range –(10**D–1)*delta .. +(10**D–1)*delta, where D is the value of the expression. A digits_constraint is compatible with a decimal fixed point subtype if the value of the expression is no greater than the digits of the subtype, and if it specifies (explicitly or implicitly) a range that is compatible with the subtype. The elaboration of a digits_constraint consists of the elaboration of the range_constraint, if any. If a range_constraint is given, a check is made that the bounds of the range are both in the range –(10**D– 1)*delta .. +(10**D–1)*delta, where D is the value of the (static) expression given after the reserved word digits. If this check fails, Constraint_Error is raised. 20 The implementation shall support at least 24 bits of precision (including the sign bit) for fixed point types. Implementation Requirements Implementation Permissions 21 Implementations are permitted to support only smalls that are a power of two. In particular, all decimal fixed point type declarations can be disallowed. Note however that conformance with the Information Systems Annex requires support for decimal smalls, and decimal fixed point type declarations with digits up to at least 18. 3.5.9 Fixed Point Types 13 December 2012 52 Ada Reference Manual — 2012 Edition NOTES 41 The base range of an ordinary fixed point type need not include the specified bounds themselves so that the range specification can be given in a natural way, such as: type Fraction is delta 2.0**(-15) range -1.0 .. 1.0; With 2's complement hardware, such a type could have a signed 16-bit representation, using 1 bit for the sign and 15 bits for fraction, resulting in a base range of –1.0 .. 1.0–2.0**(–15). Examples of fixed point types and subtypes: Examples type Volt is delta 0.125 range 0.0 .. 255.0; -- A pure fraction which requires all the available -- space in a word can be declared as the type Fraction: type Fraction is delta System.Fine_Delta range -1.0 .. 1.0; -- Fraction'Last = 1.0 – System.Fine_Delta type Money is delta 0.01 digits 15; -- decimal fixed point subtype Salary is Money digits 10; -- Money'Last = 10.0**13 – 0.01, Salary'Last = 10.0**8 – 0.01 3.5.10 Operations of Fixed Point Types The following attributes are defined for every fixed point subtype S: Static Semantics S'Small S'Delta S'Fore S'Aft S'Small denotes the small of the type of S. The value of this attribute is of the type universal_real. Small may be specified for nonderived ordinary fixed point types via an attribute_definition_clause (see 13.3); the expression of such a clause shall be static. S'Delta denotes the delta of the fixed point subtype S. The value of this attribute is of the type universal_real. S'Fore yields the minimum number of characters needed before the decimal point for the decimal representation of any value of the subtype S, assuming that the representation does not include an exponent, but includes a one-character prefix that is either a minus sign or a space. (This minimum number does not include superfluous zeros or underlines, and is at least 2.) The value of this attribute is of the type universal_integer. S'Aft yields the number of decimal digits needed after the decimal point to accommodate the delta of the subtype S, unless the delta of the subtype S is greater than 0.1, in which case the attribute yields the value one. (S'Aft is the smallest positive integer N for which (10**N)*S'Delta is greater than or equal to one.) The value of this attribute is of the type universal_integer. The following additional attributes are defined for every decimal fixed point subtype S: S'Digits S'Digits denotes the digits of the decimal fixed point subtype S, which corresponds to the number of decimal digits that are representable in objects of the subtype. The value of this attribute is of the type universal_integer. Its value is determined as follows: • For a first subtype or a subtype defined by a subtype_indication with a digits_constraint, the digits is the value of the expression given after the reserved word digits; • For a subtype defined by a subtype_indication without a digits_constraint, the digits of the subtype is the same as that of the subtype denoted by the subtype_mark in the subtype_indication. 53 13 December 2012 Fixed Point Types 3.5.9 22 23 24 25 26 27 28 1 2/1 3 4 5 6 7 8 9 Ada Reference Manual — 2012 Edition 10 11 S'Scale • The digits of a base subtype is the largest integer D such that the range –(10**D– 1)*delta .. +(10**D–1)*delta is included in the base range of the type. S'Scale denotes the scale of the subtype S, defined as the value N such that S'Delta = 10.0**(–N). The scale indicates the position of the point relative to the rightmost significant digits of values of subtype S. The value of this attribute is of the type universal_integer. 12 13 14 15 16 17 18 1 2 3 4 5 6 7/2 8 S'Round S'Round denotes a function with the following specification: function S'Round(X : universal_real) return S'Base The function returns the value obtained by rounding X (away from 0, if X is midway between two values of the type of S). NOTES 42 All subtypes of a fixed point type will have the same value for the Delta attribute, in the absence of delta_constraints (see J.3). 43 S'Scale is not always the same as S'Aft for a decimal subtype; for example, if S'Delta = 1.0 then S'Aft is 1 while S'Scale is 0. 44 The predefined operations of a fixed point type include the assignment operation, qualification, the membership tests, and explicit conversion to and from other numeric types. They also include the relational operators and the following predefined arithmetic operators: the binary and unary adding operators – and +, multiplying operators, and the unary operator abs. 45 As for all types, objects of a fixed point type have Size and Address attributes (see 13.3). Other attributes of fixed point types are defined in A.5.4. 3.6 Array Types An array object is a composite object consisting of components which all have the same subtype. The name for a component of an array uses one or more index values belonging to specified discrete types. The value of an array object is a composite value consisting of the values of the components. array_type_definition ::= unconstrained_array_definition | constrained_array_definition Syntax unconstrained_array_definition ::= array(index_subtype_definition {, index_subtype_definition}) of component_definition index_subtype_definition ::= subtype_mark range <> constrained_array_definition ::= array (discrete_subtype_definition {, discrete_subtype_definition}) of component_definition discrete_subtype_definition ::= discrete_subtype_indication | range component_definition ::= [aliased] subtype_indication | [aliased] access_definition For a discrete_subtype_definition that is a range, the range shall resolve to be of some specific discrete type; which discrete type shall be determined without using any context other than the bounds of the range itself (plus the preference for root_integer — see 8.6). Name Resolution Rules 3.5.10 Operations of Fixed Point Types 13 December 2012 54 Ada Reference Manual — 2012 Edition Legality Rules Each index_subtype_definition or discrete_subtype_definition in an array_type_definition defines an index subtype; its type (the index type) shall be discrete. The subtype defined by the subtype_indication of a component_definition (the component subtype) shall be a definite subtype. This paragraph was deleted. Static Semantics An array is characterized by the number of indices (the dimensionality of the array), the type and position of each index, the lower and upper bounds for each index, and the subtype of the components. The order of the indices is significant. A one-dimensional array has a distinct component for each possible index value. A multidimensional array has a distinct component for each possible sequence of index values that can be formed by selecting one value for each index position (in the given order). The possible values for a given index are all the values between the lower and upper bounds, inclusive; this range of values is called the index range. The bounds of an array are the bounds of its index ranges. The length of a dimension of an array is the number of values of the index range of the dimension (zero for a null range). The length of a one-dimensional array is the length of its only dimension. An array_type_definition defines an array type and its first subtype. For each object of this array type, the number of indices, the type and position of each index, and the subtype of the components are as in the type definition; the values of the lower and upper bounds for each index belong to the corresponding index subtype of its type, except for null arrays (see 3.6.1). An unconstrained_array_definition defines an array type with an unconstrained first subtype. Each index_subtype_definition defines the corresponding index subtype to be the subtype denoted by the subtype_mark. The compound delimiter <> (called a box) of an index_subtype_definition stands for an undefined range (different objects of the type need not have the same bounds). A constrained_array_definition defines an array type with a constrained first subtype. Each discrete_- subtype_definition defines the corresponding index subtype, as well as the corresponding index range for the constrained first subtype. The constraint of the first subtype consists of the bounds of the index ranges. The discrete subtype defined by a discrete_subtype_definition is either that defined by the subtype_- indication, or a subtype determined by the range as follows: • If the type of the range resolves to root_integer, then the discrete_subtype_definition defines a subtype of the predefined type Integer with bounds given by a conversion to Integer of the bounds of the range; • Otherwise, the discrete_subtype_definition defines a subtype of the type of the range, with the bounds given by the range. The component_definition of an array_type_definition defines the nominal subtype of the components. If the reserved word aliased appears in the component_definition, then each component of the array is aliased (see 3.10). 9 10 11/2 12 13 14 15 16 17 18 19 20 The elaboration of an array_type_definition creates the array type and its first subtype, and consists of the elaboration of any discrete_subtype_definitions and the component_definition. 21 Dynamic Semantics 55 13 December 2012 Array Types 3.6 Ada Reference Manual — 2012 Edition 22/2 The elaboration of a discrete_subtype_definition that does not contain any per-object expressions creates the discrete subtype, and consists of the elaboration of the subtype_indication or the evaluation of the range. The elaboration of a discrete_subtype_definition that contains one or more per-object expressions is defined in 3.8. The elaboration of a component_definition in an array_type_definition consists of the elaboration of the subtype_indication or access_definition. The elaboration of any discrete_subtype_- definitions and the elaboration of the component_definition are performed in an arbitrary order. 22.1/3 For an array type with a scalar component type, the following language-defined representation aspect may be specified with an aspect_specification (see 13.1.1): Static Semantics 22.2/3 Default_Component_Value This aspect shall be specified by a static expression, and that expression shall be explicit, even if the aspect has a boolean type. Default_Component_Value shall be specified only on a full_type_declaration. 22.3/3 If a derived type with no primitive subprograms inherits a boolean Default_Component_Value aspect, the aspect may be specified to have any value for the derived type. 22.4/3 The expected type for the expression specified for the Default_Component_Value aspect is the component type of the array type defined by the full_type_declaration on which it appears. Name Resolution Rules 23 24 25 26 27 28 NOTES 46 All components of an array have the same subtype. In particular, for an array of components that are one-dimensional arrays, this means that all components have the same bounds and hence the same length. 47 Each elaboration of an array_type_definition creates a distinct array type. A consequence of this is that each object whose object_declaration contains an array_type_definition is of its own unique type. Examples of type declarations with unconstrained array definitions: Examples type Vector is array(Integer range <>) of Real; type Matrix is array(Integer range <>, Integer range <>) of Real; type Bit_Vector is array(Integer range <>) of Boolean; type Roman is array(Positive range <>) of Roman_Digit; -- see 3.5.2 Examples of type declarations with constrained array definitions: type Table is array(1 .. 10) of Integer; type Schedule is array(Day) of Boolean; type Line is array(1 .. Max_Line_Size) of Character; 29 Examples of object declarations with array type definitions: 30/2 Grid : array(1 .. 80, 1 .. 100) of Boolean; Mix : array(Color range Red .. Green) of Boolean; Msg_Table : constant array(Error_Code) of access constant String := (Too_Big => new String'("Result too big"), Too_Small => ...); Page : array(Positive range <>) of Line := -- an array of arrays (1 | 50 => Line'(1 | Line'Last => '+', others => '-'), -- see 4.3.3 2 .. 49 => Line'(1 | Line'Last => '|', others => ' ')); -- Page is constrained by its initial value to (1..50) 3.6 Array Types 13 December 2012 56 Ada Reference Manual — 2012 Edition 3.6.1 Index Constraints and Discrete Ranges An index_constraint determines the range of possible values for every index of an array subtype, and thereby the corresponding array bounds. index_constraint ::= (discrete_range {, discrete_range}) discrete_range ::= discrete_subtype_indication | range Syntax Name Resolution Rules The type of a discrete_range is the type of the subtype defined by the subtype_indication, or the type of the range. For an index_constraint, each discrete_range shall resolve to be of the type of the corresponding index. Legality Rules An index_constraint shall appear only in a subtype_indication whose subtype_mark denotes either an unconstrained array subtype, or an unconstrained access subtype whose designated subtype is an unconstrained array subtype; in either case, the index_constraint shall provide a discrete_range for each index of the array type. A discrete_range defines a range whose bounds are given by the range, or by the range of the subtype defined by the subtype_indication. Static Semantics Dynamic Semantics An index_constraint is compatible with an unconstrained array subtype if and only if the index range defined by each discrete_range is compatible (see 3.5) with the corresponding index subtype. If any of the discrete_ranges defines a null range, any array thus constrained is a null array, having no components. An array value satisfies an index_constraint if at each index position the array value and the index_constraint have the same index bounds. The elaboration of an index_constraint consists of the evaluation of the discrete_range(s), in an arbitrary order. The evaluation of a discrete_range consists of the elaboration of the subtype_indication or the evaluation of the range. NOTES 48 The elaboration of a subtype_indication consisting of a subtype_mark followed by an index_constraint checks the compatibility of the index_constraint with the subtype_mark (see 3.2.2). 49 Even if an array value does not satisfy the index constraint of an array subtype, Constraint_Error is not raised on conversion to the array subtype, so long as the length of each dimension of the array value and the array subtype match. See 4.6. Examples Examples of array declarations including an index constraint: Board : Matrix(1 .. 8, 1 .. 8); -- see 3.6 Rectangle : Matrix(1 .. 20, 1 .. 30); Inverse : Matrix(1 .. N, 1 .. N); -- N need not be static Filter : Bit_Vector(0 .. 31); 1 2 3 4 5 6 7 8 9 10 11 12 13 57 13 December 2012 Index Constraints and Discrete Ranges 3.6.1 Ada Reference Manual — 2012 Edition Example of array declaration with a constrained array subtype: My_Schedule : Schedule; -- all arrays of type Schedule have the same bounds Example of record type with a component that is an array: type Var_Line(Length : Natural) is record Image : String(1 .. Length); end record; Null_Line : Var_Line(0); -- Null_Line.Image is a null array 3.6.2 Operations of Array Types Legality Rules The argument N used in the attribute_designators for the N-th dimension of an array shall be a static expression of some integer type. The value of N shall be positive (nonzero) and no greater than the dimensionality of the array. 14 15 16 17 18 1 Static Semantics 2/1 The following attributes are defined for a prefix A that is of an array type (after any implicit dereference), or denotes a constrained array subtype: 3 4 5 6 7 8 9 A'First A'First denotes the lower bound of the first index range; its type is the corresponding index type. A'First(N) A'First(N) denotes the lower bound of the N-th index range; its type is the corresponding index type. A'Last A'Last(N) A'Range A'Last denotes the upper bound of the first index range; its type is the corresponding index type. A'Last(N) denotes the upper bound of the N-th index range; its type is the corresponding index type. A'Range is equivalent to the range A'First .. A'Last, except that the prefix A is only evaluated once. A'Range(N) A'Range(N) is equivalent to the range A'First(N) .. A'Last(N), except that the prefix A is only evaluated once. A'Length A'Length denotes the number of values of the first index range (zero for a null range); its type is universal_integer. 10 A'Length(N) A'Length(N) denotes the number of values of the N-th index range (zero for a null range); its type is universal_integer. Implementation Advice 11/3 12 13 An implementation should normally represent multidimensional arrays in row-major order, consistent with the notation used for multidimensional array aggregates (see 4.3.3). However, if convention Fortran is specified for a multidimensional array type, then column-major order should be used instead (see B.5, “Interfacing with Fortran”). NOTES 50 The attribute_references A'First and A'First(1) denote the same value. A similar relation exists for the attribute_references A'Last, A'Range, and A'Length. The following relation is satisfied (except for a null array) by the above attributes if the index type is an integer type: A'Length(N) = A'Last(N) - A'First(N) + 1 3.6.1 Index Constraints and Discrete Ranges 13 December 2012 58 Ada Reference Manual — 2012 Edition 51 An array type is limited if its component type is limited (see 7.5). 52 The predefined operations of an array type include the membership tests, qualification, and explicit conversion. If the array type is not limited, they also include assignment and the predefined equality operators. For a one-dimensional array type, they include the predefined concatenation operators (if nonlimited) and, if the component type is discrete, the predefined relational operators; if the component type is boolean, the predefined logical operators are also included. 14 15 53 A component of an array can be named with an indexed_component. A value of an array type can be specified with an array_aggregate. For a one-dimensional array type, a slice of the array can be named; also, string literals are defined if the component type is a character type. 16/2 Examples (using arrays declared in the examples of subclause 3.6.1): Examples -- Filter'First = 0 Filter'Last = 31 Filter'Length = 32 -- Rectangle'Last(1) = 20 Rectangle'Last(2) = 30 3.6.3 String Types Static Semantics A one-dimensional array type whose component type is a character type is called a string type. There are three predefined string types, String, Wide_String, and Wide_Wide_String, each indexed by values of the predefined subtype Positive; these are declared in the visible part of package Standard: subtype Positive is Integer range 1 .. Integer'Last; type String is array(Positive range <>) of Character; type Wide_String is array(Positive range <>) of Wide_Character; type Wide_Wide_String is array(Positive range <>) of Wide_Wide_Character; NOTES 54 String literals (see 2.6 and 4.2) are defined for all string types. The concatenation operator & is predefined for string types, as for all nonlimited one-dimensional array types. The ordering operators <, <=, >, and >= are predefined for string types, as for all one-dimensional discrete array types; these ordering operators correspond to lexicographic order (see 4.5.2). Examples of string objects: Stars : String(1 .. 120) := (1 .. 120 => '*' ); Question : constant String := "How many characters?"; Examples characters) Ask_Twice : String := Question & Question; Ninety_Six : constant Roman := "XCVI"; -- see 3.5.2 and 3.6 -- constrained to (1..40) -- Question'First = 1, Question'Last = 20 -- Question'Length = 20 (the number of 17 18 1 2/2 3 4/2 5 6 7 8 59 13 December 2012 Operations of Array Types 3.6.2 Ada Reference Manual — 2012 Edition 3.7 Discriminants 1/2 2/2 3 4 5/2 6 7 8/2 9/2 9.1/3 10/3 A composite type (other than an array or interface type) can have discriminants, which parameterize the type. A known_discriminant_part specifies the discriminants of a composite type. A discriminant of an object is a component of the object, and is either of a discrete type or an access type. An unknown_discriminant_part in the declaration of a view of a type specifies that the discriminants of the type are unknown for the given view; all subtypes of such a view are indefinite subtypes. discriminant_part ::= unknown_discriminant_part | known_discriminant_part Syntax unknown_discriminant_part ::= (<>) known_discriminant_part ::= (discriminant_specification {; discriminant_specification}) discriminant_specification ::= defining_identifier_list : [null_exclusion] subtype_mark [:= default_expression] | defining_identifier_list : access_definition [:= default_expression] default_expression ::= expression The expected type for the default_expression of a discriminant_specification is that of the corresponding discriminant. Name Resolution Rules Legality Rules A discriminant_part is only permitted in a declaration for a composite type that is not an array or interface type (this includes generic formal types). A type declared with a known_discriminant_part is called a discriminated type, as is a type that inherits (known) discriminants. The subtype of a discriminant may be defined by an optional null_exclusion and a subtype_mark, in which case the subtype_mark shall denote a discrete or access subtype, or it may be defined by an access_definition. A discriminant that is defined by an access_definition is called an access discriminant and is of an anonymous access type. Default_expressions shall be provided either for all or for none of the discriminants of a known_- discriminant_part. No default_expressions are permitted in a known_discriminant_part in a declaration of a nonlimited tagged type or a generic formal type. A discriminant_specification for an access discriminant may have a default_expression only in the declaration for an immutably limited type (see 7.5). In addition to the places where Legality Rules normally apply (see 12.3), this rule applies also in the private part of an instance of a generic unit. 11/2 This paragraph was deleted. 12 13 14 For a type defined by a derived_type_definition, if a known_discriminant_part is provided in its declaration, then: • The parent subtype shall be constrained; • If the parent type is not a tagged type, then each discriminant of the derived type shall be used in the constraint defining the parent subtype; 3.7 Discriminants 13 December 2012 60 Ada Reference Manual — 2012 Edition • If a discriminant is used in the constraint defining the parent subtype, the subtype of the discriminant shall be statically compatible (see 4.9.1) with the subtype of the corresponding parent discriminant. This paragraph was deleted. Static Semantics A discriminant_specification declares a discriminant; the subtype_mark denotes its subtype unless it is an access discriminant, in which case the discriminant's subtype is the anonymous access-to-variable subtype defined by the access_definition. For a type defined by a derived_type_definition, each discriminant of the parent type is either inherited, constrained to equal some new discriminant of the derived type, or constrained to the value of an expression. When inherited or constrained to equal some new discriminant, the parent discriminant and the discriminant of the derived type are said to correspond. Two discriminants also correspond if there is some common discriminant to which they both correspond. A discriminant corresponds to itself as well. If a discriminant of a parent type is constrained to a specific value by a derived_type_definition, then that discriminant is said to be specified by that derived_type_definition. A constraint that appears within the definition of a discriminated type depends on a discriminant of the type if it names the discriminant as a bound or discriminant value. A component_definition depends on a discriminant if its constraint depends on the discriminant, or on a discriminant that corresponds to it. A component depends on a discriminant if: • Its component_definition depends on the discriminant; or • It is declared in a variant_part that is governed by the discriminant; or • It is a component inherited as part of a derived_type_definition, and the constraint of the parent_subtype_indication depends on the discriminant; or • It is a subcomponent of a component that depends on the discriminant. Each value of a discriminated type includes a value for each component of the type that does not depend on a discriminant; this includes the discriminants themselves. The values of discriminants determine which other component values are present in the value of the discriminated type. A type declared with a known_discriminant_part is said to have known discriminants; its first subtype is unconstrained. A type declared with an unknown_discriminant_part is said to have unknown discriminants. A type declared without a discriminant_part has no discriminants, unless it is a derived type; if derived, such a type has the same sort of discriminants (known, unknown, or none) as its parent (or ancestor) type. A tagged class-wide type also has unknown discriminants. Any subtype of a type with unknown discriminants is an unconstrained and indefinite subtype (see 3.2 and 3.3). Dynamic Semantics For an access discriminant, its access_definition is elaborated when the value of the access discriminant is defined: by evaluation of its default_expression, by elaboration of a discriminant_constraint, or by an assignment that initializes the enclosing object. NOTES 55 If a discriminated type has default_expressions for its discriminants, then unconstrained variables of the type are permitted, and the values of the discriminants can be changed by an assignment to such a variable. If defaults are not provided for the discriminants, then all variables of the type are constrained, either by explicit constraint or by their initial value; the values of the discriminants of such a variable cannot be changed after initialization. 15 16/3 17 18 19 20 21 22 23 24 25 26 27/2 28 61 13 December 2012 Discriminants 3.7 29 30 31 32 33 34 35 36 37/3 1 2 3 4 5 Ada Reference Manual — 2012 Edition 56 The default_expression for a discriminant of a type is evaluated when an object of an unconstrained subtype of the type is created. 57 Assignment to a discriminant of an object (after its initialization) is not allowed, since the name of a discriminant is a constant; neither assignment_statements nor assignments inherent in passing as an in out or out parameter are allowed. Note however that the value of a discriminant can be changed by assigning to the enclosing object, presuming it is an unconstrained variable. 58 A discriminant that is of a named access type is not called an access discriminant; that term is used only for discriminants defined by an access_definition. Examples of discriminated types: Examples type Buffer(Size : Buffer_Size := 100) is -- see 3.5.4 record Pos : Buffer_Size := 0; Value : String(1 .. Size); end record; type Matrix_Rec(Rows, Columns : Integer) is record Mat : Matrix(1 .. Rows, 1 .. Columns); -- see 3.6 end record; type Square(Side : Integer) is new Matrix_Rec(Rows => Side, Columns => Side); type Double_Square(Number : Integer) is record Left : Square(Number); Right : Square(Number); end record; task type Worker(Prio : System.Priority; Buf : access Buffer) with Priority => Prio is -- see D.1 -- discriminants used to parameterize the task type (see 9.1) entry Fill; entry Drain; end Worker; 3.7.1 Discriminant Constraints A discriminant_constraint specifies the values of the discriminants for a given discriminated type. discriminant_constraint ::= (discriminant_association {, discriminant_association}) Syntax discriminant_association ::= [discriminant_selector_name {| discriminant_selector_name} =>] expression A discriminant_association is said to be named if it has one or more discriminant_selector_names; it is otherwise said to be positional. In a discriminant_constraint, any positional associations shall precede any named associations. Name Resolution Rules Each selector_name of a named discriminant_association shall resolve to denote a discriminant of the subtype being constrained; the discriminants so named are the associated discriminants of the named association. For a positional association, the associated discriminant is the one whose discriminant_- specification occurred in the corresponding position in the known_discriminant_part that defined the discriminants of the subtype being constrained. 3.7 Discriminants 13 December 2012 62 Ada Reference Manual — 2012 Edition The expected type for the expression in a discriminant_association is that of the associated discriminant(s). 6 Legality Rules A discriminant_constraint is only allowed in a subtype_indication whose subtype_mark denotes either an unconstrained discriminated subtype, or an unconstrained access subtype whose designated subtype is an unconstrained discriminated subtype. However, in the case of an access subtype, a discriminant_constraint is legal only if any dereference of a value of the access type is known to be constrained (see 3.3). In addition to the places where Legality Rules normally apply (see 12.3), these rules apply also in the private part of an instance of a generic unit. A named discriminant_association with more than one selector_name is allowed only if the named discriminants are all of the same type. A discriminant_constraint shall provide exactly one value for each discriminant of the subtype being constrained. This paragraph was deleted. Dynamic Semantics A discriminant_constraint is compatible with an unconstrained discriminated subtype if each discriminant value belongs to the subtype of the corresponding discriminant. A composite value satisfies a discriminant constraint if and only if each discriminant of the composite value has the value imposed by the discriminant constraint. For the elaboration of a discriminant_constraint, the expressions in the discriminant_associations are evaluated in an arbitrary order and converted to the type of the associated discriminant (which might raise Constraint_Error — see 4.6); the expression of a named association is evaluated (and converted) once for each associated discriminant. The result of each evaluation and conversion is the value imposed by the constraint for the associated discriminant. 7/3 8 9/3 10 11 12 NOTES 59 The rules of the language ensure that a discriminant of an object always has a value, either from explicit or implicit initialization. 13 Examples (using types declared above in subclause 3.7): Examples Large : Buffer(200); -- constrained, always 200 characters -- (explicit discriminant value) Message : Buffer; -- unconstrained, initially 100 characters -- (default discriminant value) Basis : Square(5); -- constrained, always 5 by 5 Illegal : Square; -- illegal, a Square has to be constrained 14/3 15 3.7.2 Operations of Discriminated Types If a discriminated type has default_expressions for its discriminants, then unconstrained variables of the type are permitted, and the discriminants of such a variable can be changed by assignment to the variable. For a formal parameter of such a type, an attribute is provided to determine whether the corresponding actual parameter is constrained or unconstrained. 1 63 13 December 2012 Discriminant Constraints 3.7.1 Ada Reference Manual — 2012 Edition 2 For a prefix A that is of a discriminated type (after any implicit dereference), the following attribute is defined: Static Semantics 3/3 A'Constrained Yields the value True if A denotes a constant, a value, a tagged object, or a constrained variable, and False otherwise. 4 1 2 3 4 5/1 6/3 Erroneous Execution The execution of a construct is erroneous if the construct has a constituent that is a name denoting a subcomponent that depends on discriminants, and the value of any of these discriminants is changed by this execution between evaluating the name and the last use (within this execution) of the subcomponent denoted by the name. 3.8 Record Types A record object is a composite object consisting of named components. The value of a record object is a composite value consisting of the values of the components. record_type_definition ::= [[abstract] tagged] [limited] record_definition Syntax record_definition ::= record component_list end record | null record component_list ::= component_item {component_item} | {component_item} variant_part | null; component_item ::= component_declaration | aspect_clause component_declaration ::= defining_identifier_list : component_definition [:= default_expression] [aspect_specification]; Name Resolution Rules 7 The expected type for the default_expression, if any, in a component_declaration is the type of the component. 8/2 9/2 This paragraph was deleted. Legality Rules Each component_declaration declares a component of the record type. Besides components declared by component_declarations, the components of a record type include any components declared by discriminant_specifications of the record type declaration. The identifiers of all components of a record type shall be distinct. 10 Within a type_declaration, a name that denotes a component, protected subprogram, or entry of the type is allowed only in the following cases: 3.7.2 Operations of Discriminated Types 13 December 2012 64 Ada Reference Manual — 2012 Edition • A name that denotes any component, protected subprogram, or entry is allowed within an aspect_specification, an operational item, or a representation item that occurs within the declaration of the composite type. • A name that denotes a noninherited discriminant is allowed within the declaration of the type, but not within the discriminant_part. If the discriminant is used to define the constraint of a component, the bounds of an entry family, or the constraint of the parent subtype in a derived_type_definition, then its name shall appear alone as a direct_name (not as part of a larger expression or expanded name). A discriminant shall not be used to define the constraint of a scalar component. 11/3 12/3 If the name of the current instance of a type (see 8.6) is used to define the constraint of a component, then it shall appear as a direct_name that is the prefix of an attribute_reference whose result is of an access type, and the attribute_reference shall appear alone. 13 If a record_type_definition includes the reserved word limited, the type is called an explicitly limited record type. 13.1/3 Static Semantics The component_definition of a component_declaration defines the (nominal) subtype of the component. If the reserved word aliased appears in the component_definition, then the component is aliased (see 3.10). If the component_list of a record type is defined by the reserved word null and there are no discriminants, then the record type has no components and all records of the type are null records. A record_definition of null record is equivalent to record null; end record. Dynamic Semantics The elaboration of a record_type_definition creates the record type and its first subtype, and consists of the elaboration of the record_definition. The elaboration of a record_definition consists of the elaboration of its component_list, if any. The elaboration of a component_list consists of the elaboration of the component_items and variant_part, if any, in the order in which they appear. The elaboration of a component_declaration consists of the elaboration of the component_definition. Within the definition of a composite type, if a component_definition or discrete_subtype_definition (see 9.5.2) includes a name that denotes a discriminant of the type, or that is an attribute_reference whose prefix denotes the current instance of the type, the expression containing the name is called a per-object expression, and the constraint or range being defined is called a per-object constraint. For the elaboration of a component_definition of a component_declaration or the discrete_subtype_definition of an entry_- declaration for an entry family (see 9.5.2), if the component subtype is defined by an access_definition or if the constraint or range of the subtype_indication or discrete_subtype_definition is not a per-object constraint, then the access_definition, subtype_indication, or discrete_subtype_definition is elaborated. On the other hand, if the constraint or range is a per-object constraint, then the elaboration consists of the evaluation of any included expression that is not part of a per-object expression. Each such expression is evaluated once unless it is part of a named association in a discriminant constraint, in which case it is evaluated once for each associated discriminant. 14 15 16 17 18/2 When a per-object constraint is elaborated (as part of creating an object), each per-object expression of the constraint is evaluated. For other expressions, the values determined during the elaboration of the component_definition or entry_declaration are used. Any checks associated with the enclosing 18.1/1 65 13 December 2012 Record Types 3.8 Ada Reference Manual — 2012 Edition subtype_indication or discrete_subtype_definition are performed, including the subtype compatibility check (see 3.2.2), and the associated subtype is created. 19 20 21 22 23 24 NOTES 60 A component_declaration with several identifiers is equivalent to a sequence of single component_declarations, as explained in 3.3.1. 61 The default_expression of a record component is only evaluated upon the creation of a default-initialized object of the record type (presuming the object has the component, if it is in a variant_part — see 3.3.1). 62 The subtype defined by a component_definition (see 3.6) has to be a definite subtype. 63 If a record type does not have a variant_part, then the same components are present in all values of the type. 64 A record type is limited if it has the reserved word limited in its definition, or if any of its components are limited (see 7.5). 65 The predefined operations of a record type include membership tests, qualification, and explicit conversion. If the record type is nonlimited, they also include assignment and the predefined equality operators. 25/2 66 A component of a record can be named with a selected_component. A value of a record can be specified with a record_aggregate. 26 27 28 29 30 31 1 2 3 4 Examples of record type declarations: Examples type Date is record Day : Integer range 1 .. 31; Month : Month_Name; Year : Integer range 0 .. 4000; end record; type Complex is record Re : Real := 0.0; Im : Real := 0.0; end record; Examples of record variables: Tomorrow, Yesterday : Date; A, B, C : Complex; -- both components of A, B, and C are implicitly initialized to zero 3.8.1 Variant Parts and Discrete Choices A record type with a variant_part specifies alternative lists of components. Each variant defines the components for the value or values of the discriminant covered by its discrete_choice_list. Syntax variant_part ::= case discriminant_direct_name is variant {variant} end case; variant ::= when discrete_choice_list => component_list discrete_choice_list ::= discrete_choice {| discrete_choice} 3.8 Record Types 13 December 2012 66 Ada Reference Manual — 2012 Edition discrete_choice ::= choice_expression | discrete_subtype_indication | range | others Name Resolution Rules The discriminant_direct_name shall resolve to denote a discriminant (called the discriminant of the variant_part) specified in the known_discriminant_part of the full_type_declaration that contains the variant_part. The expected type for each discrete_choice in a variant is the type of the discriminant of the variant_part. The discriminant of the variant_part shall be of a discrete type. Legality Rules The choice_expressions, subtype_indications, and ranges given as discrete_choices in a variant_part shall be static. The discrete_choice others shall appear alone in a discrete_choice_list, and such a discrete_choice_list, if it appears, shall be the last one in the enclosing construct. A discrete_choice is defined to cover a value in the following cases: • A discrete_choice that is a choice_expression covers a value if the value equals the value of the choice_expression converted to the expected type. 5/3 6 7 8/3 9 10/3 • A discrete_choice that is a subtype_indication covers all values (possibly none) that belong to 10.1/3 the subtype and that satisfy the static predicate of the subtype (see 3.2.4). • A discrete_choice that is a range covers all values (possibly none) that belong to the range. • The discrete_choice others covers all values of its expected type that are not covered by previous discrete_choice_lists of the same construct. A discrete_choice_list covers a value if one of its discrete_choices covers the value. The possible values of the discriminant of a variant_part shall be covered as follows: • If the discriminant is of a static constrained scalar subtype then, except within an instance of a generic unit, each non-others discrete_choice shall cover only values in that subtype that satisfy its predicate, and each value of that subtype that satisfies its predicate shall be covered by some discrete_choice (either explicitly or by others); 11/3 12 13 14 15/3 • If the type of the discriminant is a descendant of a generic formal scalar type, then the 16/3 variant_part shall have an others discrete_choice; • Otherwise, each value of the base range of the type of the discriminant shall be covered (either explicitly or by others). Two distinct discrete_choices of a variant_part shall not cover the same value. If the component_list of a variant is specified by null, the variant has no components. Static Semantics The discriminant of a variant_part is said to govern the variant_part and its variants. In addition, the discriminant of a derived type governs a variant_part and its variants if it corresponds (see 3.7) to the discriminant of the variant_part. A record value contains the values of the components of a particular variant only if the value of the discriminant governing the variant is covered by the discrete_choice_list of the variant. This rule applies in turn to any further variant that is, itself, included in the component_list of the given variant. Dynamic Semantics 17 18 19 20 21 67 13 December 2012 Variant Parts and Discrete Choices 3.8.1 Ada Reference Manual — 2012 Edition 21.1/3 When an object of a discriminated type T is initialized by default, Constraint_Error is raised if no discrete_choice_list of any variant of a variant_part of T covers the value of the discriminant that governs the variant_part. When a variant_part appears in the component_list of another variant V, this test is only applied if the value of the discriminant governing V is covered by the discrete_choice_list of V. 22 23 24 25 26 27 28 29 The elaboration of a variant_part consists of the elaboration of the component_list of each variant in the order in which they appear. Example of record type with a variant part: Examples type Device is (Printer, Disk, Drum); type State is (Open, Closed); type Peripheral(Unit : Device := Disk) is record Status : State; case Unit is when Printer => Line_Count : Integer range 1 .. Page_Size; when others => Cylinder : Cylinder_Index; Track : Track_Number; end case; end record; Examples of record subtypes: subtype Drum_Unit is Peripheral(Drum); subtype Disk_Unit is Peripheral(Disk); Examples of constrained record variables: Writer : Peripheral(Unit => Printer); Archive : Disk_Unit; 3.9 Tagged Types and Type Extensions 1 Tagged types and type extensions support object-oriented programming, based on inheritance with extension and run-time polymorphism via dispatching operations. Static Semantics 2/2 2.1/2 A record type or private type that has the reserved word tagged in its declaration is called a tagged type. In addition, an interface type is a tagged type, as is a task or protected type derived from an interface (see 3.9.4). When deriving from a tagged type, as for any derived type, additional primitive subprograms may be defined, and inherited primitive subprograms may be overridden. The derived type is called an extension of its ancestor types, or simply a type extension. Every type extension is also a tagged type, and is a record extension or a private extension of some other tagged type, or a noninterface synchronized tagged type (see 3.9.4). A record extension is defined by a derived_type_definition with a record_extension_part (see 3.9.1), which may include the definition of additional components. A private extension, which is a partial view of a record extension or of a synchronized tagged type, can be declared in the visible part of a package (see 7.3) or in a generic formal part (see 12.5.1). 3 An object of a tagged type has an associated (run-time) tag that identifies the specific tagged type used to create the object originally. The tag of an operand of a class-wide tagged type T'Class controls which 3.8.1 Variant Parts and Discrete Choices 13 December 2012 68 Ada Reference Manual — 2012 Edition subprogram body is to be executed when a primitive subprogram of type T is applied to the operand (see 3.9.2); using a tag to control which body to execute is called dispatching. The tag of a specific tagged type identifies the full_type_declaration of the type, and for a type extension, is sufficient to uniquely identify the type among all descendants of the same ancestor. If a declaration for a tagged type occurs within a generic_package_declaration, then the corresponding type declarations in distinct instances of the generic package are associated with distinct tags. For a tagged type that is local to a generic package body and with all of its ancestors (if any) also local to the generic body, the language does not specify whether repeated instantiations of the generic body result in distinct tags. The following language-defined library package exists: package Ada.Tags is pragma Preelaborate(Tags); type Tag is private; pragma Preelaborable_Initialization(Tag); No_Tag : constant Tag; function Expanded_Name(T : Tag) return String; function Wide_Expanded_Name(T : Tag) return Wide_String; function Wide_Wide_Expanded_Name(T : Tag) return Wide_Wide_String; function External_Tag(T : Tag) return String; function Internal_Tag(External : String) return Tag; function Descendant_Tag(External : String; Ancestor : Tag) return Tag; function Is_Descendant_At_Same_Level(Descendant, Ancestor : Tag) return Boolean; function Parent_Tag (T : Tag) return Tag; type Tag_Array is array (Positive range <>) of Tag; function Interface_Ancestor_Tags (T : Tag) return Tag_Array; function Is_Abstract (T : Tag) return Boolean; Tag_Error : exception; private ... -- not specified by the language end Ada.Tags; No_Tag is the default initial value of type Tag. The function Wide_Wide_Expanded_Name returns the full expanded name of the first subtype of the specific type identified by the tag, in upper case, starting with a root library unit. The result is implementation defined if the type is declared within an unnamed block_statement. The function Expanded_Name (respectively, Wide_Expanded_Name) returns the same sequence of graphic characters as that defined for Wide_Wide_Expanded_Name, if all the graphic characters are defined is implementation defined, but no shorter than that returned by Wide_Wide_Expanded_Name for the same value of the argument. in Character (respectively, Wide_Character); otherwise, the sequence of characters 4/2 5 6/2 6.1/2 7/2 7.1/2 7.2/2 7.3/2 7.4/2 7.5/3 8 9 9.1/2 10/2 10.1/2 The function External_Tag returns a string to be used in an external representation for the given tag. The call External_Tag(S'Tag) is equivalent to the attribute_reference S'External_Tag (see 13.3). 11 The string returned by the functions Expanded_Name, Wide_Expanded_Name, Wide_Wide_Expanded_- Name, and External_Tag has lower bound 1. 11.1/2 The function Internal_Tag returns a tag that corresponds to the given external tag, or raises Tag_Error if the given string is not the external tag for any specific type of the partition. Tag_Error is also raised if the specific type identified is a library-level type whose tag has not yet been created (see 13.14). 12/2 69 13 December 2012 Tagged Types and Type Extensions 3.9 12.1/3 12.2/2 12.3/3 Ada Reference Manual — 2012 Edition The function Descendant_Tag returns the (internal) tag for the type that corresponds to the given external tag and is both a descendant of the type identified by the Ancestor tag and has the same accessibility level as the identified ancestor. Tag_Error is raised if External is not the external tag for such a type. Tag_Error is also raised if the specific type identified is a library-level type whose tag has not yet been created, or if the given external tag identifies more than one type that has the appropriate Ancestor and accessibility level. The function Is_Descendant_At_Same_Level returns True if the Descendant tag identifies a type that is both a descendant of the type identified by Ancestor and at the same accessibility level. If not, it returns False. of the purposes For and Is_Descendant_At_Same_Level, a tagged type T2 is a descendant of a type T1 if it is the same as T1, or if its parent type or one of its progenitor types is a descendant of type T1 by this rule, even if at the point of the declaration of T2, one of the derivations in the chain is not visible. functions Descendant_Tag semantics dynamic the of 12.4/3 The function Parent_Tag returns the tag of the parent type of the type whose tag is T. If the type does not have a parent type (that is, it was not declared by a derived_type_declaration), then No_Tag is returned. 12.5/3 The function Interface_Ancestor_Tags returns an array containing the tag of each interface ancestor type of the type whose tag is T, other than T itself. The lower bound of the returned array is 1, and the order of the returned tags is unspecified. Each tag appears in the result exactly once. If the type whose tag is T has no interface ancestors, a null array is returned. 12.6/3 The function Is_Abstract returns True if the type whose tag is T is abstract, and False otherwise. 13 14 15 For every subtype S of a tagged type T (specific or class-wide), the following attributes are defined: S'Class S'Class denotes a subtype of the class-wide type (called T'Class in this International Standard) for the class rooted at T (or if S already denotes a class-wide subtype, then S'Class is the same as S). S'Class is unconstrained. However, if S is constrained, then the values of S'Class are only those that when converted to the type T belong to S. 16 S'Tag S'Tag denotes the tag of the type T (or if T is class-wide, the tag of the root type of the corresponding class). The value of this attribute is of type Tag. 17 Given a prefix X that is of a class-wide tagged type (after any implicit dereference), the following attribute is defined: 18 X'Tag X'Tag denotes the tag of X. The value of this attribute is of type Tag. 18.1/2 The following language-defined generic function exists: 18.2/3 generic type T (<>) is abstract tagged limited private; type Parameters (<>) is limited private; with function Constructor (Params : not null access Parameters) return T is abstract; function Ada.Tags.Generic_Dispatching_Constructor (The_Tag : Tag; Params : not null access Parameters) return T'Class with Convention => Intrinsic; pragma Preelaborate(Generic_Dispatching_Constructor); 18.3/2 Tags.Generic_Dispatching_Constructor provides a mechanism to create an object of an appropriate type from just a tag value. The function Constructor is expected to create the object given a reference to an object of type Parameters. 3.9 Tagged Types and Type Extensions 13 December 2012 70 Ada Reference Manual — 2012 Edition Dynamic Semantics The tag associated with an object of a tagged type is determined as follows: • The tag of a stand-alone object, a component, or an aggregate of a specific tagged type T identifies T. • The tag of an object created by an allocator for an access type with a specific designated tagged type T, identifies T. • The tag of an object of a class-wide tagged type is that of its initialization expression. • The tag of the result returned by a function whose result type is a specific tagged type T identifies T. • The tag of the result returned by a function with a class-wide result type is that of the return object. The tag is preserved by type conversion and by parameter passing. The tag of a value is the tag of the associated object (see 6.2). Tag_Error is raised by a call of Descendant_Tag, Expanded_Name, External_Tag, Interface_Ancestor_- or Tags, Wide_Wide_Expanded_Name if any tag passed is No_Tag. Parent_Tag, Wide_Expanded_Name, Is_Descendant_At_Same_Level, Is_Abstract, An instance of Tags.Generic_Dispatching_Constructor raises Tag_Error if The_Tag does not represent a concrete descendant of T or if the innermost master (see 7.6.1) of this descendant is not also a master of the instance. Otherwise, it dispatches to the primitive function denoted by the formal Constructor for the type identified by The_Tag, passing Params, and returns the result. Any exception raised by the function is propagated. 19 20 21 22 23 24/2 25 25.1/3 25.2/2 Erroneous Execution If an internal tag provided to an instance of Tags.Generic_Dispatching_Constructor or to any subprogram declared in package Tags identifies either a type that is not library-level and whose tag has not been created (see 13.14), or a type that does not exist in the partition at the time of the call, then execution is erroneous. 25.3/2 The implementation of Internal_Tag and Descendant_Tag may raise Tag_Error if no specific type corresponding to the string External passed as a parameter exists in the partition at the time the function is called, or if there is no such type whose innermost master is a master of the point of the function call. 26/2 Implementation Permissions Internal_Tag should return the tag of a type, if one exists, whose innermost master is a master of the point of the function call. 26.1/3 Implementation Advice NOTES 67 A type declared with the reserved word tagged should normally be declared in a package_specification, so that new primitive subprograms can be declared for it. 68 Once an object has been created, its tag never changes. 69 Class-wide types are defined to have unknown discriminants (see 3.7). This means that objects of a class-wide type have to be explicitly initialized (whether created by an object_declaration or an allocator), and that aggregates have to be explicitly qualified with a specific type when their expected type is class-wide. 27 28 29 70 The capability provided by Tags.Generic_Dispatching_Constructor is sometimes known as a factory. 30/2 71 13 December 2012 Tagged Types and Type Extensions 3.9 Ada Reference Manual — 2012 Edition Examples 31 32 33 Examples of tagged record types: type Point is tagged record X, Y : Real := 0.0; end record; type Expression is tagged null record; -- Components will be added by each extension 3.9.1 Type Extensions 1/2 Every type extension is a tagged type, and is a record extension or a private extension of some other tagged type, or a noninterface synchronized tagged type. 2 3/2 Syntax record_extension_part ::= with record_definition Legality Rules The parent type of a record extension shall not be a class-wide type nor shall it be a synchronized tagged type (see 3.9.4). If the parent type or any progenitor is nonlimited, then each of the components of the record_extension_part shall be nonlimited. In addition to the places where Legality Rules normally apply (see 12.3), these rules apply also in the private part of an instance of a generic unit. 4/2 Within the body of a generic unit, or the body of any of its descendant library units, a tagged type shall not be declared as a descendant of a formal type declared within the formal part of the generic unit. 4.1/2 A record extension is a null extension if its declaration has no known_discriminant_part and its record_extension_part includes no component_declarations. Static Semantics 5 6 7/2 8 9 10 11 The elaboration of a record_extension_part consists of the elaboration of the record_definition. Dynamic Semantics NOTES 71 The term “type extension” refers to a type as a whole. The term “extension part” refers to the piece of text that defines the additional components (if any) the type extension has relative to its specified ancestor type. 72 When an extension is declared immediately within a body, primitive subprograms are inherited and are overridable, but new primitive subprograms cannot be added. 73 A name that denotes a component (including a discriminant) of the parent type is not allowed within the record_extension_part. Similarly, a name that denotes a component defined within the record_extension_part is not allowed within the record_extension_part. It is permissible to use a name that denotes a discriminant of the record extension, providing there is a new known_discriminant_part in the enclosing type declaration. (The full rule is given in 3.8.) 74 Each visible component of a record extension has to have a unique name, whether the component is (visibly) inherited from the parent type or declared in the record_extension_part (see 8.3). Examples of record extensions (of types defined above in 3.9): Examples type Painted_Point is new Point with record Paint : Color := White; end record; -- Components X and Y are inherited 3.9 Tagged Types and Type Extensions 13 December 2012 72 Ada Reference Manual — 2012 Edition Origin : constant Painted_Point := (X | Y => 0.0, Paint => Black); type Literal is new Expression with record -- a leaf in an Expression tree Value : Real; end record; type Expr_Ptr is access all Expression'Class; -- see 3.10 type Binary_Operation is new Expression with record -- an internal node in an Expression tree Left, Right : Expr_Ptr; end record; type Addition is new Binary_Operation with null record; type Subtraction is new Binary_Operation with null record; -- No additional components needed for these extensions Tree : Expr_Ptr := -- A tree representation of “5.0 + (13.0–7.0)” new Addition'( Left => new Literal'(Value => 5.0), Right => new Subtraction'( Left => new Literal'(Value => 13.0), Right => new Literal'(Value => 7.0))); 3.9.2 Dispatching Operations of Tagged Types The primitive subprograms of a tagged type, the subprograms declared by formal_abstract_subprogram_- declarations, and the stream attributes of a specific tagged type that are available (see 13.13.2) at the end of the declaration list where the type is declared are called dispatching operations. A dispatching operation can be called using a statically determined controlling tag, in which case the body to be executed is determined at compile time. Alternatively, the controlling tag can be dynamically determined, in which case the call dispatches to a body that is determined at run time; such a call is termed a dispatching call. As explained below, the properties of the operands and the context of a particular call on a dispatching operation determine how the controlling tag is determined, and hence whether or not the call is a dispatching call. Run-time polymorphism is achieved when a dispatching operation is called by a dispatching call. Static Semantics A call on a dispatching operation is a call whose name or prefix denotes the declaration of a dispatching operation. A controlling operand in a call on a dispatching operation of a tagged type T is one whose corresponding formal parameter is of type T or is of an anonymous access type with designated type T; the corresponding formal parameter is called a controlling formal parameter. If the controlling formal parameter is an access parameter, the controlling operand is the object designated by the actual parameter, rather than the actual parameter itself. If the call is to a (primitive) function with result type T (a function with a controlling result), then the call has a controlling result — the context of the call can control the dispatching. Similarly, if the call is to a function with an access result type designating T (a function with a controlling access result), then the call has a controlling access result, and the context can similarly control dispatching. 12 13 14 15 16 17 1/2 2/3 A name or expression of a tagged type is either statically tagged, dynamically tagged, or tag indeterminate, according to whether, when used as a controlling operand, the tag that controls dispatching is determined statically by the operand's (specific) type, dynamically by its tag at run time, or from context. A qualified_expression or parenthesized expression is statically, dynamically, or indeterminately tagged according to its operand. For other kinds of names and expressions, this is determined as follows: 3 73 13 December 2012 Type Extensions 3.9.1 Ada Reference Manual — 2012 Edition 4/2 5/2 6/2 7/1 8 9/1 10/2 • The name or expression is statically tagged if it is of a specific tagged type and, if it is a call with a controlling result or controlling access result, it has at least one statically tagged controlling operand; • The name or expression is dynamically tagged if it is of a class-wide type, or it is a call with a controlling result or controlling access result and at least one dynamically tagged controlling operand; • The name or expression is tag indeterminate if it is a call with a controlling result or controlling access result, all of whose controlling operands (if any) are tag indeterminate. A type_conversion is statically or dynamically tagged according to whether the type determined by the subtype_mark is specific or class-wide, respectively. For an object that is designated by an expression whose expected type is an anonymous access-to-specific tagged type, the object is dynamically tagged if the expression, ignoring enclosing parentheses, is of the form X'Access, where X is of a class-wide type, or is of the form new T'(...), where T denotes a class-wide subtype. Otherwise, the object is statically or dynamically tagged according to whether the designated type of the type of the expression is specific or class-wide, respectively. Legality Rules A call on a dispatching operation shall not have both dynamically tagged and statically tagged controlling operands. If the expected type for an expression or name is some specific tagged type, then the expression or name shall not be dynamically tagged unless it is a controlling operand in a call on a dispatching operation. Similarly, if the expected type for an expression is an anonymous access-to-specific tagged type, then the object designated by the expression shall not be dynamically tagged unless it is a controlling operand in a call on a dispatching operation. In the declaration of a dispatching operation of a tagged type, everywhere a subtype of the tagged type appears as a subtype of the profile (see 6.1), it shall statically match the first subtype of the tagged type. If the dispatching operation overrides an inherited subprogram, it shall be subtype conformant with the inherited subprogram. The convention of an inherited dispatching operation is the convention of the corresponding primitive operation of the parent or progenitor type. The default convention of a dispatching operation that overrides an inherited primitive operation is the convention of the inherited operation; if the operation overrides multiple inherited operations, then they shall all have the same convention. An explicitly declared dispatching operation shall not be of convention Intrinsic. 11/2 The default_expression for a controlling formal parameter of a dispatching operation shall be tag indeter- minate. 11.1/2 If a dispatching operation is defined by a subprogram_renaming_declaration or the instantiation of a generic subprogram, any access parameter of the renamed subprogram or the generic subprogram that corresponds to a controlling access parameter of the dispatching operation, shall have a subtype that excludes null. 12 13 A given subprogram shall not be a dispatching operation of two or more distinct tagged types. The explicit declaration of a primitive subprogram of a tagged type shall occur before the type is frozen (see 13.14). For example, new dispatching operations cannot be added after objects or values of the type exist, nor after deriving a record extension from it, nor after a body. 3.9.2 Dispatching Operations of Tagged Types 13 December 2012 74 Ada Reference Manual — 2012 Edition Dynamic Semantics For the execution of a call on a dispatching operation of a type T, the controlling tag value determines which subprogram body is executed. The controlling tag value is defined as follows: • If one or more controlling operands are statically tagged, then the controlling tag value is statically determined to be the tag of T. • If one or more controlling operands are dynamically tagged, then the controlling tag value is not statically determined, but is rather determined by the tags of the controlling operands. If there is more than one dynamically tagged controlling operand, a check is made that they all have the same tag. If this check fails, Constraint_Error is raised unless the call is a function_call whose name denotes the declaration of an equality operator (predefined or user defined) that returns Boolean, in which case the result of the call is defined to indicate inequality, and no subprogram_body is executed. This check is performed prior to evaluating any tag- indeterminate controlling operands. • If all of the controlling operands (if any) are tag-indeterminate, then: • If the call has a controlling result or controlling access result and is itself, or designates, a (possibly parenthesized or qualified) controlling operand of an enclosing call on a dispatching operation of a descendant of type T, then its controlling tag value is determined by the controlling tag value of this enclosing call; • If the call has a controlling result or controlling access result and (possibly parenthesized, qualified, or dereferenced) is the expression of an assignment_statement whose target is of a class-wide type, then its controlling tag value is determined by the target; • Otherwise, the controlling tag value is statically determined to be the tag of type T. For the execution of a call on a dispatching operation, the action performed is determined by the properties of the corresponding dispatching operation of the specific type identified by the controlling tag value: • • • if the corresponding operation is explicitly declared for this type, even if the declaration occurs in a private part, then the action comprises an invocation of the explicit body for the operation; if the corresponding operation is implicitly declared for this type and is implemented by an entry or protected subprogram (see 9.1 and 9.4), then the action comprises a call on this entry or protected subprogram, with the target object being given by the first actual parameter of the call, and the actual parameters of the entry or protected subprogram being given by the remaining actual parameters of the call, if any; if the corresponding operation is a predefined operator then the action comprises an invocation of that operator; • otherwise, the action is the same as the action for the corresponding operation of the parent type or progenitor type from which the operation was inherited except that additional invariant checks (see 7.3.2) and class-wide postcondition checks (see 6.1.1) may apply. If there is more than one such corresponding operation, the action is that for the operation that is not a null procedure, if any; otherwise, the action is that of an arbitrary one of the operations. NOTES 75 The body to be executed for a call on a dispatching operation is determined by the tag; it does not matter whether that tag is determined statically or dynamically, and it does not matter whether the subprogram's declaration is visible at the place of the call. 76 This subclause covers calls on dispatching subprograms of a tagged type. Rules for tagged type membership tests are described in 4.5.2. Controlling tag determination for an assignment_statement is described in 5.2. 77 A dispatching call can dispatch to a body whose declaration is not visible at the place of the call. 14 15 16 17/2 18/2 18.1/2 19 20/3 20.1/3 20.2/3 20.3/3 20.4/3 21 22/2 23 75 13 December 2012 Dispatching Operations of Tagged Types 3.9.2 24 1/2 1.1/3 Ada Reference Manual — 2012 Edition 78 A call through an access-to-subprogram value is never a dispatching call, even if the access value designates a dispatching operation. Similarly a call whose prefix denotes a subprogram_renaming_declaration cannot be a dispatching call unless the renaming itself is the declaration of a primitive subprogram. 3.9.3 Abstract Types and Subprograms An abstract type is a tagged type intended for use as an ancestor of other types, but which is not allowed to have objects of its own. An abstract subprogram is a subprogram that has no body, but is intended to be overridden at some point when inherited. Because objects of an abstract type cannot be created, a dispatching call to an abstract subprogram always dispatches to some overriding body. abstract_subprogram_declaration ::= [overriding_indicator] subprogram_specification is abstract [aspect_specification]; Syntax Static Semantics 1.2/2 Interface types (see 3.9.4) are abstract types. In addition, a tagged type that has the reserved word abstract in its declaration is an abstract type. The class-wide type (see 3.4.1) rooted at an abstract type is not itself an abstract type. 2/2 3/2 4/3 5/2 6/2 7 8/3 Only a tagged type shall have the reserved word abstract in its declaration. Legality Rules A subprogram declared by an abstract_subprogram_declaration or a formal_abstract_subprogram_- declaration (see 12.6) is an abstract subprogram. If it is a primitive subprogram of a tagged type, then the tagged type shall be abstract. If a type has an implicitly declared primitive subprogram that is inherited or is a predefined operator, and the corresponding primitive subprogram of the parent or ancestor type is abstract or is a function with a controlling access result, or if a type other than a nonabstract null extension inherits a function with a controlling result, then: • If the type is abstract or untagged, the implicitly declared subprogram is abstract. • Otherwise, the subprogram shall be overridden with a nonabstract subprogram or, in the case of a private extension inheriting a function with a controlling result, have a full type that is a null extension; for a type declared in the visible part of a package, the overriding may be either in the visible or the private part. Such a subprogram is said to require overriding. However, if the type is a generic formal type, the subprogram need not be overridden for the formal type itself; a nonabstract version will necessarily be provided by the actual type. A call on an abstract subprogram shall be a dispatching call; nondispatching calls to an abstract subprogram are not allowed. The type of an aggregate, or of an object created by an object_declaration or an allocator, or a generic formal object of mode in, shall not be abstract. The type of the target of an assignment operation (see 5.2) shall not be abstract. The type of a component shall not be abstract. If the result type of a function is abstract, then the function shall be abstract. If a function has an access result type designating an abstract type, then the function shall be abstract. The type denoted by a return_subtype_indication (see 6.5) shall not be abstract. A generic function shall not have an abstract result type or an access result type designating an abstract type. 3.9.2 Dispatching Operations of Tagged Types 13 December 2012 76 Ada Reference Manual — 2012 Edition If a partial view is not abstract, the corresponding full view shall not be abstract. If a generic formal type is abstract, then for each primitive subprogram of the formal that is not abstract, the corresponding primitive subprogram of the actual shall not be abstract. For an abstract type declared in a visible part, an abstract primitive subprogram shall not be declared in the private part, unless it is overriding an abstract subprogram implicitly declared in the visible part. For a tagged type declared in a visible part, a primitive function with a controlling result or a controlling access result shall not be declared in the private part, unless it is overriding a function implicitly declared in the visible part. 9 10/3 A generic actual subprogram shall not be an abstract subprogram unless the generic formal subprogram is declared by a formal_abstract_subprogram_declaration. The prefix of an attribute_reference for the Access, Unchecked_Access, or Address attributes shall not denote an abstract subprogram. 11/2 The elaboration of an abstract_subprogram_declaration has no effect. 11.1/2 Dynamic Semantics NOTES 79 Abstractness is not inherited; to declare an abstract type, the reserved word abstract has to be used in the declaration of the type extension. 80 A class-wide type is never abstract. Even if a class is rooted at an abstract type, the class-wide type for the class is not abstract, and an object of the class-wide type can be created; the tag of such an object will identify some nonabstract type in the class. Example of an abstract type representing a set of natural numbers: Examples package Sets is subtype Element_Type is Natural; type Set is abstract tagged null record; function Empty return Set is abstract; function Union(Left, Right : Set) return Set is abstract; function Intersection(Left, Right : Set) return Set is abstract; function Unit_Set(Element : Element_Type) return Set is abstract; procedure Take(Element : out Element_Type; From : in out Set) is abstract; end Sets; 12 13 14 15 NOTES 81 Notes on the example: Given the above abstract type, one could then derive various (nonabstract) extensions of the type, representing alternative implementations of a set. One might use a bit vector, but impose an upper bound on the largest element representable, while another might use a hash table, trading off space for flexibility. 16 3.9.4 Interface Types An interface type is an abstract tagged type that provides a restricted form of multiple inheritance. A tagged type, task type, or protected type may have one or more interface types as ancestors. 1/2 interface_type_definition ::= [limited | task | protected | synchronized] interface [and interface_list] interface_list ::= interface_subtype_mark {and interface_subtype_mark} Syntax An interface type (also called an interface) is a specific abstract tagged type that is defined by an interface_type_definition. Static Semantics 77 13 December 2012 Abstract Types and Subprograms 3.9.3 2/2 3/2 4/2 Ada Reference Manual — 2012 Edition 5/2 6/2 7/2 8/2 9/2 An interface with the reserved word limited, task, protected, or synchronized in its definition is termed, respectively, a limited interface, a task interface, a protected interface, or a synchronized interface. In addition, all task and protected interfaces are synchronized interfaces, and all synchronized interfaces are limited interfaces. A task or protected type derived from an interface is a tagged type. Such a tagged type is called a synchronized tagged type, as are synchronized interfaces and private extensions whose declaration includes the reserved word synchronized. A task interface is an abstract task type. A protected interface is an abstract protected type. An interface type has no components. An interface_subtype_mark in an interface_list names a progenitor subtype; its type is the progenitor type. An interface type inherits user-defined primitive subprograms from each progenitor type in the same way that a derived type inherits user-defined primitive subprograms from its progenitor types (see 3.4). 10/2 All user-defined primitive subprograms of an interface type shall be abstract subprograms or null procedures. Legality Rules 11/2 The type of a subtype named in an interface_list shall be an interface type. 12/2 A type derived from a nonlimited interface shall be nonlimited. 13/2 14/2 15/2 An interface derived from a task interface shall include the reserved word task in its definition; any other type derived from a task interface shall be a private extension or a task type declared by a task declaration (see 9.1). An interface derived from a protected interface shall include the reserved word protected in its definition; any other type derived from a protected interface shall be a private extension or a protected type declared by a protected declaration (see 9.4). An interface derived from a synchronized interface shall include one of the reserved words task, protected, or synchronized in its definition; any other type derived from a synchronized interface shall be a private extension, a task type declared by a task declaration, or a protected type declared by a protected declaration. 16/2 No type shall be derived from both a task interface and a protected interface. 17/2 In addition to the places where Legality Rules normally apply (see 12.3), these rules apply also in the private part of an instance of a generic unit. Dynamic Semantics 18/3 The elaboration of an interface_type_definition creates the interface type and its first subtype. 19/2 NOTES 82 Nonlimited interface types have predefined nonabstract equality operators. These may be overridden with user-defined abstract equality operators. Such operators will then require an explicit overriding for any nonabstract descendant of the interface. 20/2 Example of a limited interface and a synchronized interface extending it: Examples 3.9.4 Interface Types 13 December 2012 78 Ada Reference Manual — 2012 Edition type Queue is limited interface; procedure Append(Q : in out Queue; Person : in Person_Name) is abstract; procedure Remove_First(Q : in out Queue; Person : out Person_Name) is abstract; function Cur_Count(Q : in Queue) return Natural is abstract; function Max_Count(Q : in Queue) return Natural is abstract; -- See 3.10.1 for Person_Name. Queue_Error : exception; -- Append raises Queue_Error if Cur_Count(Q) = Max_Count(Q) -- Remove_First raises Queue_Error if Cur_Count(Q) = 0 type Synchronized_Queue is synchronized interface and Queue; -- see 9.11 procedure Append_Wait(Q : in out Synchronized_Queue; Person : in Person_Name) is abstract; procedure Remove_First_Wait(Q : in out Synchronized_Queue; Person : out Person_Name) is abstract; ... procedure Transfer(From : in out Queue'Class; To : in out Queue'Class; Number : in Natural := 1) is Person : Person_Name; begin for I in 1..Number loop Remove_First(From, Person); Append(To, Person); end loop; end Transfer; This defines a Queue interface defining a queue of people. (A similar design could be created to define any kind of queue simply by replacing Person_Name by an appropriate type.) The Queue interface has four dispatching operations, Append, Remove_First, Cur_Count, and Max_Count. The body of a class- wide operation, Transfer is also shown. Every nonabstract extension of Queue must provide implementations for at least its four dispatching operations, as they are abstract. Any object of a type derived from Queue may be passed to Transfer as either the From or the To operand. The two operands need not be of the same type in any given call. The Synchronized_Queue interface inherits the four dispatching operations from Queue and adds two additional dispatching operations, which wait if necessary rather than raising the Queue_Error exception. This synchronized interface may only be implemented by a task or protected type, and as such ensures safe concurrent access. Example use of the interface: type Fast_Food_Queue is new Queue with record ...; procedure Append(Q : in out Fast_Food_Queue; Person : in Person_Name); procedure Remove_First(Q : in out Fast_Food_Queue; Person : out Person_Name); function Cur_Count(Q : in Fast_Food_Queue) return Natural; function Max_Count(Q : in Fast_Food_Queue) return Natural; ... Cashier, Counter : Fast_Food_Queue; ... -- Add George (see 3.10.1) to the cashier's queue: Append (Cashier, George); -- After payment, move George to the sandwich counter queue: Transfer (Cashier, Counter); ... 21/2 22/3 23/2 24/2 25/2 26/2 27/2 28/2 29/3 30/2 31/2 32/2 An interface such as Queue can be used directly as the parent of a new type (as shown here), or can be used as a progenitor when a type is derived. In either case, the primitive operations of the interface are inherited. For Queue, the implementation of the four inherited routines must be provided. Inside the call of 33/2 79 13 December 2012 Interface Types 3.9.4 34/2 35/2 36/2 1 2/2 3 4 5 5.1/2 6/2 7/1 8 9/3 Ada Reference Manual — 2012 Edition Transfer, calls will dispatch Fast_Food_Queue. Example of a task interface: to the implementations of Append and Remove_First for type type Serial_Device is task interface; -- see 9.1 procedure Read (Dev : in Serial_Device; C : out Character) is abstract; procedure Write(Dev : in Serial_Device; C : in Character) is abstract; The Serial_Device interface has two dispatching operations which are intended to be implemented by task entries (see 9.1). 3.10 Access Types A value of an access type (an access value) provides indirect access to the object or subprogram it designates. Depending on its type, an access value can designate either subprograms, objects created by allocators (see 4.8), or more generally aliased objects of an appropriate type. Syntax access_type_definition ::= [null_exclusion] access_to_object_definition | [null_exclusion] access_to_subprogram_definition access_to_object_definition ::= access [general_access_modifier] subtype_indication general_access_modifier ::= all | constant access_to_subprogram_definition ::= access [protected] procedure parameter_profile | access [protected] function parameter_and_result_profile null_exclusion ::= not null access_definition ::= [null_exclusion] access [constant] subtype_mark | [null_exclusion] access [protected] procedure parameter_profile | [null_exclusion] access [protected] function parameter_and_result_profile Static Semantics There are two kinds of access types, access-to-object types, whose values designate objects, and access-to- subprogram types, whose values designate subprograms. Associated with an access-to-object type is a storage pool; several access types may share the same storage pool. All descendants of an access type share the same storage pool. A storage pool is an area of storage used to hold dynamically allocated objects (called pool elements) created by allocators; storage pools are described further in 13.11, “Storage Management”. Access-to-object types are further subdivided into pool-specific access types, whose values can designate only the elements of their associated storage pool, and general access types, whose values can designate the elements of any storage pool, as well as aliased objects created by declarations rather than allocators, and aliased subcomponents of other objects. A view of an object is defined to be aliased if it is defined by an object_declaration, component_- definition, parameter_specification, or extended_return_object_declaration with the reserved word aliased, or by a renaming of an aliased view. In addition, the dereference of an access-to-object value denotes an aliased view, as does a view conversion (see 4.6) of an aliased view. The current instance of an 3.9.4 Interface Types 13 December 2012 80 Ada Reference Manual — 2012 Edition immutably limited type (see 7.5) is defined to be aliased. Finally, a formal parameter or generic formal object of a tagged type is defined to be aliased. Aliased views are the ones that can be designated by an access value. An access_to_object_definition defines an access-to-object type and its first subtype; the subtype_- indication defines the designated subtype of the access type. If a general_access_modifier appears, then the access type is a general access type. If the modifier is the reserved word constant, then the type is an access-to-constant type; a designated object cannot be updated through a value of such a type. If the modifier is the reserved word all, then the type is an access-to-variable type; a designated object can be both read and updated through a value of such a type. If no general_access_modifier appears in the access_to_object_definition, the access type is a pool-specific access-to-variable type. An access_to_subprogram_definition defines an access-to-subprogram type and its first subtype; the parameter_profile or parameter_and_result_profile defines the designated profile of the access type. There is a calling convention associated with the designated profile; only subprograms with this calling convention can be designated by values of the access type. By default, the calling convention is “protected” if the reserved word protected appears, and “Ada” otherwise. See Annex B for how to override this default. An access_definition defines an anonymous general access type or an anonymous access-to-subprogram type. For a general access type, the subtype_mark denotes its designated subtype; if the general_- access_modifier constant appears, the type is an access-to-constant type; otherwise, it is an access-to- variable type. For an access-to-subprogram type, the parameter_profile or parameter_and_result_profile denotes its designated profile. For each access type, there is a null access value designating no entity at all, which can be obtained by (implicitly) converting the literal null to the access type. The null value of an access type is the default initial value of the type. Nonnull values of an access-to-object type are obtained by evaluating an allocator, which returns an access value designating a newly created object (see 3.10.2), or in the case of a general access-to-object type, evaluating an attribute_reference for the Access or Unchecked_Access attribute of an aliased view of an object. Nonnull values of an access-to-subprogram type are obtained by evaluating an attribute_reference for the Access attribute of a nonintrinsic subprogram. 10 11 12/3 13/2 A null_exclusion in a construct specifies that the null value does not belong to the access subtype defined by the construct, that is, the access subtype excludes null. In addition, the anonymous access subtype defined by the access_definition for a controlling access parameter (see 3.9.2) excludes null. Finally, for a subtype_indication without a null_exclusion, the subtype denoted by the subtype_indication excludes null if and only if the subtype denoted by the subtype_mark in the subtype_indication excludes null. 13.1/2 All subtypes of an access-to-subprogram type are constrained. The first subtype of a type defined by an access_definition or an access_to_object_definition is unconstrained if the designated subtype is an unconstrained array or discriminated subtype; otherwise, it is constrained. 14/3 If a subtype_indication, discriminant_specification, parameter_specification, parameter_and_result_- profile, object_renaming_declaration, or formal_object_declaration has a null_exclusion, the subtype_- mark in that construct shall denote an access subtype that does not exclude null. 14.1/2 Legality Rules A composite_constraint is compatible with an unconstrained access subtype if it is compatible with the designated subtype. A null_exclusion is compatible with any access subtype that does not exclude null. An 15/2 Dynamic Semantics 81 13 December 2012 Access Types 3.10 Ada Reference Manual — 2012 Edition access value satisfies a composite_constraint of an access subtype if it equals the null value of its type or if it designates an object whose value satisfies the constraint. An access value satisfies an exclusion of the null value if it does not equal the null value of its type. 16 The elaboration of an access_type_definition creates the access type and its first subtype. For an access- to-object type, this elaboration includes the elaboration of the subtype_indication, which creates the designated subtype. 17/2 The elaboration of an access_definition creates an anonymous access type. 18 19 20 NOTES 83 Access values are called “pointers” or “references” in some other languages. 84 Each access-to-object type has an associated storage pool; several access types can share the same pool. An object can be created in the storage pool of an access type by an allocator (see 4.8) for the access type. A storage pool (roughly) corresponds to what some other languages call a “heap.” See 13.11 for a discussion of pools. 85 Only index_constraints and discriminant_constraints can be applied to access types (see 3.6.1 and 3.7.1). 21 Examples of access-to-object types: Examples 22/2 23 24 25 26 type Peripheral_Ref is not null access Peripheral; -- see 3.8.1 type Binop_Ptr is access all Binary_Operation'Class; -- general access-to-class-wide, see 3.9.1 Example of an access subtype: subtype Drum_Ref is Peripheral_Ref(Drum); -- see 3.8.1 Example of an access-to-subprogram type: type Message_Procedure is access procedure (M : in String := "Error!"); procedure Default_Message_Procedure(M : in String); Give_Message : Message_Procedure := Default_Message_Procedure'Access; ... procedure Other_Procedure(M : in String); ... Give_Message := Other_Procedure'Access; ... Give_Message("File not found."); -- call with parameter (.all is optional) Give_Message.all; -- call with no parameters 3.10.1 Incomplete Type Declarations 1 There are no particular limitations on the designated type of an access type. In particular, the type of a component of the designated type can be another access type, or even the same access type. This permits mutually dependent and recursive access types. An incomplete_type_declaration can be used to introduce a type to be used as a designated type, while deferring its full definition to a subsequent full_type_declaration. 2/2 incomplete_type_declaration ::= type defining_identifier [discriminant_part] [is tagged]; Syntax 2.1/2 An incomplete_type_declaration declares an incomplete view of a type and its first subtype; the first subtype is unconstrained if a discriminant_part appears. If the incomplete_type_declaration includes the reserved word tagged, it declares a tagged incomplete view. An incomplete view of a type is a limited view of the type (see 7.5). Static Semantics 3.10 Access Types 13 December 2012 82 Ada Reference Manual — 2012 Edition Given an access type A whose designated type T is an incomplete view, a dereference of a value of type A also has this incomplete view except when: • • • it occurs within the immediate scope of the completion of T, or it occurs within the scope of a nonlimited_with_clause that mentions a library package in whose visible part the completion of T is declared, or it occurs within the scope of the completion of T and T is an incomplete view declared by an incomplete_type_declaration. In these cases, the dereference has the view of T visible at the point of the dereference. Similarly, if a subtype_mark denotes a subtype_declaration defining a subtype of an incomplete view T, the subtype_mark denotes an incomplete view except under the same three circumstances given above, in which case it denotes the view of T visible at the point of the subtype_mark. Legality Rules An incomplete_type_declaration requires a completion, which shall be a type_declaration other than an incomplete_type_declaration. If the incomplete_type_declaration occurs immediately within either the visible part of a package_specification or a declarative_part, then the type_declaration shall occur later and immediately within this visible part or declarative_part. If the incomplete_type_declaration occurs immediately within the private part of a given package_specification, then the type_declaration shall occur later and immediately within either the private part itself, or the declarative_part of the corresponding package_body. If an incomplete_type_declaration includes the reserved word tagged, then a type_declaration that completes it shall declare a tagged type. If an incomplete_type_declaration has a known_discriminant_- part, then a type_declaration that completes it shall have a fully conforming (explicit) known_- discriminant_part (see 6.3.1). If an incomplete_type_declaration has no discriminant_part (or an unknown_discriminant_part), then a corresponding type_declaration is nevertheless allowed to have discriminants, either explicitly, or inherited via derivation. A name that denotes an incomplete view of a type may be used as follows: • as the subtype_mark in the subtype_indication of an access_to_object_definition; the only form of constraint allowed in this subtype_indication is a discriminant_constraint (a null_exclusion is not allowed); • as the subtype_mark in the subtype_indication of a subtype_declaration; the subtype_- indication shall not have a null_exclusion or a constraint; • as the subtype_mark in an access_definition for an access-to-object type; • as the subtype_mark defining the subtype of a parameter or result in a profile occurring within a basic_declaration; • as a generic actual parameter whose corresponding generic formal parameter is a formal incomplete type (see 12.5.1). If such a name denotes a tagged incomplete view, it may also be used: • as the subtype_mark defining the subtype of a parameter in the profile for a subprogram_body, entry_body, or accept_statement; • as the prefix of an attribute_reference whose attribute_designator is Class; such an attribute_- reference is restricted to the uses allowed here; it denotes a tagged incomplete view. This paragraph was deleted. 2.2/2 2.3/2 2.4/3 2.5/3 2.6/3 2.7/3 3/3 4/3 5/2 6/3 7/2 8/3 8.1/3 8.2/3 8.3/2 8.4/3 9/2 9.1/3 83 13 December 2012 Incomplete Type Declarations 3.10.1 9.2/3 9.3/2 Ada Reference Manual — 2012 Edition • This paragraph was deleted. If any of the above uses occurs as part of the declaration of a primitive subprogram of the incomplete view, and the declaration occurs immediately within the private part of a package, then the completion of the incomplete view shall also occur immediately within the private part; it shall not be deferred to the package body. 9.4/2 No other uses of a name that denotes an incomplete view of a type are allowed. 10/3 A prefix that denotes an object shall not be of an incomplete view. An actual parameter in a call shall not be of an untagged incomplete view. The result object of a function call shall not be of an incomplete view. A prefix shall not denote a subprogram having a formal parameter of an untagged incomplete view, nor a return type that is an incomplete view. Paragraph 11 was deleted. 12 The elaboration of an incomplete_type_declaration has no effect. Dynamic Semantics 13 13.1/3 14 15 16 17 18 19/2 20/2 21/2 NOTES 86 Within a declarative_part, an incomplete_type_declaration and a corresponding full_type_declaration cannot be separated by an intervening body. This is because a type has to be completely defined before it is frozen, and a body freezes all types declared prior to it in the same declarative_part (see 13.14). 87 A name that denotes an object of an incomplete view is defined to be of a limited type. Hence, the target of an assignment statement cannot be of an incomplete view. Example of a recursive type: Examples type Cell; -- incomplete type declaration type Link is access Cell; type Cell is record Value : Integer; Succ : Link; Pred : Link; end record; Head : Link := new Cell'(0, null, null); Next : Link := Head.Succ; Examples of mutually dependent access types: type Person(<>); -- incomplete type declaration type Car is tagged; -- incomplete type declaration type Person_Name is access Person; type Car_Name is access all Car'Class; type Car is tagged record Number : Integer; Owner : Person_Name; end record; 3.10.1 Incomplete Type Declarations 13 December 2012 84 Ada Reference Manual — 2012 Edition type Person(Sex : Gender) is record Name : String(1 .. 20); Birth : Date; Age : Integer range 0 .. 130; Vehicle : Car_Name; case Sex is when M => Wife : Person_Name(Sex => F); when F => Husband : Person_Name(Sex => M); end case; end record; My_Car, Your_Car, Next_Car : Car_Name := new Car; -- see 4.8 George : Person_Name := new Person(M); ... George.Vehicle := Your_Car; 22 23 3.10.2 Operations of Access Types The attribute Access is used to create access values designating aliased objects and nonintrinsic subprograms. The “accessibility” rules prevent dangling references (in the absence of uses of certain unchecked features — see Clause 13). 1/3 For an attribute_reference with attribute_designator Access (or Unchecked_Access — see 13.10), the expected type shall be a single access type A such that: 2/2 Name Resolution Rules • A is an access-to-object type with designated type D and the type of the prefix is D'Class or is covered by D, or • A is an access-to-subprogram type whose designated profile is type conformant with that of the prefix. The prefix of such an attribute_reference is never interpreted as an implicit_dereference or a parameterless function_call (see 4.1.4). The designated type or profile of the expected type of the attribute_reference is the expected type or profile for the prefix. Static Semantics The accessibility rules, which prevent dangling references, are written in terms of accessibility levels, which reflect the run-time nesting of masters. As explained in 7.6.1, a master is the execution of a certain construct, such as a subprogram_body. An accessibility level is deeper than another if it is more deeply nested at run time. For example, an object declared local to a called subprogram has a deeper accessibility level than an object declared local to the calling subprogram. The accessibility rules for access types require that the accessibility level of an object designated by an access value be no deeper than that of the access type. This ensures that the object will live at least as long as the access type, which in turn ensures that the access value cannot later designate an object that no longer exists. The Unchecked_Access attribute may be used to circumvent the accessibility rules. 2.1/2 2.2/2 2.3/2 3/2 A given accessibility level is said to be statically deeper than another if the given level is known at compile time (as defined below) to be deeper than the other for all possible executions. In most cases, accessibility is enforced at compile time by Legality Rules. Run-time accessibility checks are also used, since the Legality Rules do not cover certain cases involving access parameters and generic packages. 4 85 13 December 2012 Incomplete Type Declarations 3.10.1 Ada Reference Manual — 2012 Edition 5 6 7/3 8 9/2 Each master, and each entity and view created by it, has an accessibility level: • The accessibility level of a given master is deeper than that of each dynamically enclosing master, and deeper than that of each master upon which the task executing the given master directly depends (see 9.3). • An entity or view defined by a declaration and created as part of its elaboration has the same accessibility level as the innermost master of the declaration except in the cases of renaming and derived access types described below. Other than for an explicitly aliased parameter, a formal parameter of a callable entity has the same accessibility level as the master representing the invocation of the entity. • The accessibility level of a view of an object or subprogram defined by a renaming_declaration is the same as that of the renamed view. • The accessibility level of a view conversion, qualified_expression, or parenthesized expression, is the same as that of the operand. 9.1/3 • The accessibility level of a conditional_expression is the accessibility level of the evaluated dependent_expression. 10/3 • The accessibility level of an aggregate that is used (in its entirety) to directly initialize part of an object is that of the object being initialized. In other contexts, the accessibility level of an aggregate is that of the innermost master that evaluates the aggregate. 10.1/3 • The accessibility level of the result of a function call is that of the master of the function call, which is determined by the point of call as follows: 10.2/3 • If the result is used (in its entirety) to directly initialize part of an object, the master is that of the object being initialized. In the case where the initialized object is a coextension (see below) that becomes a coextension of another object, the master is that of the eventual object to which the coextension will be transferred. 10.3/3 • If the result is of an anonymous access type and is the operand of an explicit conversion, the master is that of the target type of the conversion; 10.4/3 • If the result is of an anonymous access type and defines an access discriminant, the master is the same as that for an object created by an anonymous allocator that defines an access discriminant (even if the access result is of an access-to-subprogram type). 10.5/3 • If the call itself defines the result of a function to which one of the above rules applies, these rules are applied recursively; 10.6/3 • In other cases, the master of the call is that of the innermost master that evaluates the function call. 10.7/3 10.8/3 In the case of a call to a function whose result type is an anonymous access type, the accessibility level of the type of the result of the function call is also determined by the point of call as described above. • Within a return statement, the accessibility level of the return object is that of the execution of the return statement. If the return statement completes normally by returning from the function, then prior to leaving the function, the accessibility level of the return object changes to be a level determined by the point of call, as does the level of any coextensions (see below) of the return object. 11 11.1/2 • The accessibility level of a derived access type is the same as that of its ultimate ancestor. • The accessibility level of the anonymous access type defined by an access_definition of an object_renaming_declaration is the same as that of the renamed view. 3.10.2 Operations of Access Types 13 December 2012 86 Ada Reference Manual — 2012 Edition • The accessibility level of the anonymous access type of an access discriminant in the subtype_indication or qualified_expression of an allocator, or in the expression or return_- subtype_indication of a return statement is determined as follows: • If the value of the access discriminant is determined by a discriminant_association in a subtype_indication, the accessibility level of the object or subprogram designated by the associated value (or library level if the value is null); • If the value of the access discriminant is determined by a default_expression in the declaration of the discriminant, the level of the object or subprogram designated by the associated value (or library level if null); • If the value of the access discriminant is determined by a record_component_association in an aggregate, the accessibility level of the object or subprogram designated by the associated value (or library level if the value is null); 12/2 12.1/2 12.2/3 12.3/3 • In other cases, where the value of the access discriminant is determined by an object with 12.4/3 an unconstrained nominal subtype, the accessibility level of the object. • The accessibility level of the anonymous access type of an access discriminant in any other 12.5/3 context is that of the enclosing object. • The accessibility level of the anonymous access type of an access parameter specifying an access-to-object type is the same as that of the view designated by the actual (or library-level if the actual is null). • The accessibility level of the anonymous access type of an access parameter specifying an access-to-subprogram type is deeper than that of any master; all such anonymous access types have this same level. • The accessibility level of the type of a stand-alone object of an anonymous access-to-object type is the same as the accessibility level of the type of the access value most recently assigned to the object; accessibility checks ensure that this is never deeper than that of the declaration of the stand-alone object. • The accessibility level of an explicitly aliased (see 6.1) formal parameter in a function body is determined by the point of call; it is the same level that the return object ultimately will have. • The accessibility level of an object created by an allocator is the same as that of the access type, except for an allocator of an anonymous access type (an anonymous allocator) in certain contexts, as follows: For an anonymous allocator that defines the result of a function with an access result, the accessibility level is determined as though the allocator were in place of the call of the function; in the special case of a call that is the operand of a type conversion, the level is that of the target access type of the conversion. For an anonymous allocator defining the value of an access parameter, the accessibility level is that of the innermost master of the call. For an anonymous allocator whose type is that of a stand-alone object of an anonymous access-to- object type, the accessibility level is that of the declaration of the stand-alone object. For one defining an access discriminant, the accessibility level is determined as follows: • for an allocator used to define the discriminant of an object, the level of the object; • for an allocator used to define the constraint in a subtype_indication in any other context, the level of the master that elaborates the subtype_indication. • This paragraph was deleted. In the first case, the allocated object is said to be a coextension of the object whose discriminant designates it, as well as of any object of which the discriminated object is itself a coextension or subcomponent. If the allocated object is a coextension of an anonymous object representing the result of an aggregate or function call that is used (in its entirety) to directly initialize a part of an object, after the result is assigned, the coextension becomes a coextension of the object being 13/3 13.1/2 13.2/3 13.3/3 14/3 14.1/3 14.2/3 14.3/3 14.4/3 87 13 December 2012 Operations of Access Types 3.10.2 Ada Reference Manual — 2012 Edition initialized and is no longer considered a coextension of the anonymous object. All coextensions of an object (which have not thus been transfered by such an initialization) are finalized when the object is finalized (see 7.6.1). 14.5/3 • Within a return statement, the accessibility level of the anonymous access type of an access result is that of the master of the call. 15/3 • The accessibility level of a view of an object or subprogram designated by an access value is the same as that of the access type. 16 • The accessibility level of a component, protected subprogram, or entry of (a view of) a composite object is the same as that of (the view of) the composite object. 16.1/3 17 18 18.1/2 19/3 19.1/3 19.2/3 19.3/3 20 21 22 to be used In the above rules, the operand of a view conversion, parenthesized expression or qualified_expression is considered the view conversion, parenthesized expression or if that context. Similarly, a dependent_expression of a qualified_expression conditional_expression is considered to be used in a context if the conditional_expression itself is used in that context. in a context in is used itself One accessibility level is defined to be statically deeper than another in the following cases: • For a master that is statically nested within another master, the accessibility level of the inner master is statically deeper than that of the outer master. • The accessibility level of the anonymous access type of an access parameter specifying an access-to-subprogram type is statically deeper than that of any master; all such anonymous access types have this same level. • The statically deeper relationship does not apply to the accessibility level of the anonymous type of an access parameter specifying an access-to-object type nor does it apply to a descendant of a generic formal type; that is, such an accessibility level is not considered to be statically deeper, nor statically shallower, than any other. • The statically deeper relationship does not apply to the accessibility level of the type of a stand- alone object of an anonymous access-to-object type; that is, such an accessibility level is not considered to be statically deeper, nor statically shallower, than any other. • Inside a return statement that applies to a function F, when determining whether the accessibility level of an explicitly aliased parameter of F is statically deeper than the level of the return object of F, the level of the return object is considered to be the same as that of the level of the explicitly aliased parameter; for statically comparing with the level of other entities, an explicitly aliased parameter of F is considered to have the accessibility level of the body of F. • For determining whether a level is statically deeper than the level of the anonymous access type of an access result of a function, when within a return statement that applies to the function, the level of the master of the call is presumed to be the same as that of the level of the master that elaborated the function body. • For determining whether one level is statically deeper than another when within a generic package body, the generic package is presumed to be instantiated at the same level as where it was declared; run-time checks are needed in the case of more deeply nested instantiations. • For determining whether one level is statically deeper than another when within the declarative region of a type_declaration, the current instance of the type is presumed to be an object created at a deeper level than that of the type. The accessibility level of all library units is called the library level; a library-level declaration or entity is one whose accessibility level is the library level. 3.10.2 Operations of Access Types 13 December 2012 88 Ada Reference Manual — 2012 Edition The following attribute is defined for a prefix X that denotes an aliased view of an object: X'Access X'Access yields an access value that designates the object denoted by X. The type of X'Access is an access-to-object type, as determined by the expected type. The expected type shall be a general access type. X shall denote an aliased view of an object, including possibly the current instance (see 8.6) of a limited type within its definition, or a formal parameter or generic formal object of a tagged type. The view denoted by the prefix X shall satisfy the following additional requirements, presuming the expected type for X'Access is the general access type A with designated type D: • If A is an access-to-variable type, then the view shall be a variable; on the other hand, if A is an access-to-constant type, the view may be either a constant or a variable. • The view shall not be a subcomponent that depends on discriminants of an object unless the object is known to be constrained. • If A is a named access type and D is a tagged type, then the type of the view shall be covered by D; if A is anonymous and D is tagged, then the type of the view shall be either D'Class or a type covered by D; if D is untagged, then the type of the view shall be D, and either: • the designated subtype of A shall statically match the nominal subtype of the view; or • D shall be discriminated in its full view and unconstrained in any partial view, and the designated subtype of A shall be unconstrained. For the purposes of determining within a generic body whether D is unconstrained in any partial view, a discriminated subtype is considered to have a constrained partial view if it is a descendant of an untagged generic formal private or derived type. 23 24/1 25 26/3 27/2 27.1/2 27.2/3 • The accessibility level of the view shall not be statically deeper than that of the 28/3 access type A. In addition to the places where Legality Rules normally apply (see 12.3), these requirements apply also in the private part of an instance of a generic unit. 28.1/3 A check is made that the accessibility level of X is not deeper than that of the access type A. If this check fails, Program_Error is raised. If the nominal subtype of X does not statically match the designated subtype of A, a view conversion of X to the designated subtype is evaluated (which might raise Constraint_Error — see 4.6) and the value of X'Access designates that view. The following attribute is defined for a prefix P that denotes a subprogram: P'Access P'Access yields an access value that designates the subprogram denoted by P. The type of P'Access is an access-to-subprogram type (S), as determined by the expected type. The accessibility level of P shall not be statically deeper than that of S. In addition to the places where Legality Rules normally apply (see 12.3), this rule applies also in the private part of an instance of a generic unit. The profile of P shall be subtype conformant with the designated profile of S, and shall not be Intrinsic. If the subprogram denoted by P is declared within a generic unit, and the expression P'Access occurs within the body of that generic unit or within the body of a generic unit declared within the declarative region of the generic unit, then the ultimate ancestor of S shall be either a nonformal type declared within the generic unit or an anonymous access type of an access parameter. 29 30 31 32/3 89 13 December 2012 Operations of Access Types 3.10.2 Ada Reference Manual — 2012 Edition 32.1/3 An expression is said to have distributed accessibility if it is Legality Rules 32.2/3 32.3/3 32.4/3 32.5/3 33 34/2 35 36 37/2 38 39 40 41 • a conditional_expression (see 4.5.7); or • a view conversion, qualified_expression, or parenthesized expression whose operand has distributed accessibility. The statically deeper relationship does not apply to the accessibility level of an expression having distributed accessibility; that is, such an accessibility level is not considered to be statically deeper, nor statically shallower, than any other. Any static accessibility requirement that is imposed on an expression that has distributed accessibility (or on its type) is instead imposed on the dependent_expressions of the underlying conditional_expression. This rule is applied recursively if a dependent_expression also has distributed accessibility. NOTES 88 The Unchecked_Access attribute yields the same result as the Access attribute for objects, but has fewer restrictions (see 13.10). There are other predefined operations that yield access values: an allocator can be used to create an object, and return an access value that designates it (see 4.8); evaluating the literal null yields a null access value that designates no entity at all (see 4.2). 89 The predefined operations of an access type also include the assignment operation, qualification, and membership tests. Explicit conversion is allowed between general access types with matching designated subtypes; explicit conversion is allowed between access-to-subprogram types with subtype conformant profiles (see 4.6). Named access types have predefined equality operators; anonymous access types do not, but they can use the predefined equality operators for universal_access (see 4.5.2). 90 The object or subprogram designated by an access value can be named with a dereference, either an explicit_- dereference or an implicit_dereference. See 4.1. 91 A call through the dereference of an access-to-subprogram value is never a dispatching call. 92 The Access attribute for subprograms and parameters of an anonymous access-to-subprogram type may together be used to implement “downward closures” — that is, to pass a more-nested subprogram as a parameter to a less-nested subprogram, as might be appropriate for an iterator abstraction or numerical integration. Downward closures can also be implemented using generic formal subprograms (see 12.6). Note that Unchecked_Access is not allowed for subprograms. 93 Note that using an access-to-class-wide tagged type with a dispatching operation is a potentially more structured alternative to using an access-to-subprogram type. 94 An implementation may consider two access-to-subprogram values to be unequal, even though they designate the same subprogram. This might be because one points directly to the subprogram, while the other points to a special prologue that performs an Elaboration_Check and then jumps to the subprogram. See 4.5.2. Example of use of the Access attribute: Examples Martha : Person_Name := new Person(F); -- see 3.10.1 Cars : array (1..2) of aliased Car; ... Martha.Vehicle := Cars(1)'Access; George.Vehicle := Cars(2)'Access; 3.10.2 Operations of Access Types 13 December 2012 90 Ada Reference Manual — 2012 Edition 3.11 Declarative Parts A declarative_part contains declarative_items (possibly none). Syntax declarative_part ::= {declarative_item} declarative_item ::= basic_declarative_item | body basic_declarative_item ::= basic_declaration | aspect_clause | use_clause body ::= proper_body | body_stub proper_body ::= subprogram_body | package_body | task_body | protected_body Static Semantics 1 2 3 4/1 5 6 The list of declarative_items of a declarative_part is called the declaration list of the declarative_part. 6.1/2 Dynamic Semantics The elaboration of a declarative_part consists of the elaboration of the declarative_items, if any, in the order in which they are given in the declarative_part. An elaborable construct is in the elaborated state after the normal completion of its elaboration. Prior to that, it is not yet elaborated. For a construct that attempts to use a body, a check (Elaboration_Check) is performed, as follows: • For a call to a (non-protected) subprogram that has an explicit body, a check is made that the body is already elaborated. This check and the evaluations of any actual parameters of the call are done in an arbitrary order. • For a call to a protected operation of a protected type (that has a body — no check is performed if the protected type is imported — see B.1), a check is made that the protected_body is already elaborated. This check and the evaluations of any actual parameters of the call are done in an arbitrary order. • For the activation of a task, a check is made by the activator that the task_body is already elaborated. If two or more tasks are being activated together (see 9.2), as the result of the elaboration of a declarative_part or the initialization for the object created by an allocator, this check is done for all of them before activating any of them. • For the instantiation of a generic unit that has a body, a check is made that this body is already elaborated. This check and the evaluation of any explicit_generic_actual_parameters of the instantiation are done in an arbitrary order. The exception Program_Error is raised if any of these checks fails. 3.11.1 Completions of Declarations Declarations sometimes come in two parts. A declaration that requires a second part is said to require completion. The second part is called the completion of the declaration (and of the entity declared), and is is a body, an entry_body, a either another declaration, a body, or a pragma. A body 7 8 9 10/1 11/3 12 13 14 1/3 91 13 December 2012 Declarative Parts 3.11 Ada Reference Manual — 2012 Edition null_procedure_declaration or an expression_function_declaration that completes another declaration, or a renaming-as-body (see 8.5.4). 2 3 4 5 6/3 7 8 9/3 10 Name Resolution Rules A construct that can be a completion is interpreted as the completion of a prior declaration only if: • The declaration and the completion occur immediately within the same declarative region; • The defining name or defining_program_unit_name in the completion is the same as in the declaration, or in the case of a pragma, the pragma applies to the declaration; • If the declaration is overloadable, then the completion either has a type-conformant profile, or is a pragma. Legality Rules An implicit declaration shall not have a completion. For any explicit declaration that is specified to require completion, there shall be a corresponding explicit completion, unless the declared entity is imported (see B.1). At most one completion is allowed for a given declaration. Additional requirements on completions appear where each kind of completion is defined. A type is completely defined at a place that is after its full type definition (if it has one) and after all of its subcomponent types are completely defined. A type shall be completely defined before it is frozen (see 13.14 and 7.3). NOTES 95 Completions are in principle allowed for any kind of explicit declaration. However, for some kinds of declaration, the only allowed completion is an implementation-defined pragma, and implementations are not required to have any such pragmas. 96 There are rules that prevent premature uses of declarations that have a corresponding completion. The Elaboration_Checks of 3.11 prevent such uses at run time for subprograms, protected operations, tasks, and generic units. The rules of 13.14, “Freezing Rules” prevent, at compile time, premature uses of other entities such as private types and deferred constants. 3.11.1 Completions of Declarations 13 December 2012 92 Ada Reference Manual — 2012 Edition 4 Names and Expressions The rules applicable to the different forms of name and expression, and to their evaluation, are given in this clause. 1/3 4.1 Names Names can denote declared entities, whether declared explicitly or implicitly (see 3.1). Names can also denote objects or subprograms designated by access values; the results of type_conversions or function_calls; subcomponents and slices of objects and values; protected subprograms, single entries, entry families, and entries in families of entries. Finally, names can denote attributes of any of the foregoing. Syntax name ::= direct_name | explicit_dereference | indexed_component | slice | selected_component | attribute_reference | type_conversion | function_call | character_literal | qualified_expression | generalized_reference | generalized_indexing direct_name ::= identifier | operator_symbol prefix ::= name | implicit_dereference explicit_dereference ::= name.all implicit_dereference ::= name Certain forms of name (indexed_components, selected_components, slices, and attribute_references) include a prefix that is either itself a name that denotes some related entity, or an implicit_dereference of an access value that designates some related entity. 1 2/3 3 4 5 6 7/3 The name in a dereference (either an implicit_dereference or an explicit_dereference) is expected to be of any access type. 8 Name Resolution Rules Static Semantics If the type of the name in a dereference is some access-to-object type T, then the dereference denotes a view of an object, the nominal subtype of the view being the designated subtype of T. If the designated subtype has unconstrained discriminants, the (actual) subtype of the view is constrained by the values of the discriminants of the designated object, except when there is a partial view of the type of the designated subtype that does not have discriminants, in which case the dereference is not constrained by its discriminant values. 9/3 If the type of the name in a dereference is some access-to-subprogram type S, then the dereference denotes a view of a subprogram, the profile of the view being the designated profile of S. 10 The evaluation of a name determines the entity denoted by the name. This evaluation has no other effect for a name that is a direct_name or a character_literal. 11/2 Dynamic Semantics 93 13 December 2012 Names and Expressions 4 12 13 14 15 16 17 1 2 3 4 5 6 7 Ada Reference Manual — 2012 Edition The evaluation of a name that has a prefix includes the evaluation of the prefix. The evaluation of a prefix consists of the evaluation of the name or the implicit_dereference. The prefix denotes the entity denoted by the name or the implicit_dereference. The evaluation of a dereference consists of the evaluation of the name and the determination of the object or subprogram that is designated by the value of the name. A check is made that the value of the name is not the null access value. Constraint_Error is raised if this check fails. The dereference denotes the object or subprogram designated by the value of the name. Examples of direct names: Examples Pi -- the direct name of a number Limit -- the direct name of a constant Count -- the direct name of a scalar variable Board -- the direct name of an array variable Matrix -- the direct name of a type Random -- the direct name of a function Error -- the direct name of an exception (see 3.3.2) (see 3.3.1) (see 3.3.1) (see 3.6.1) (see 3.6) (see 6.1) (see 11.1) Examples of dereferences: Next_Car.all -- the access variable Next_Car (see 3.10.1) Next_Car.Owner -- selected component with implicit dereference; -- same as Next_Car.all.Owner -- explicit dereference denoting the object designated by 4.1.1 Indexed Components An indexed_component denotes either a component of an array or an entry in a family of entries. indexed_component ::= prefix(expression {, expression}) Syntax Name Resolution Rules The prefix of an indexed_component with a given number of expressions shall resolve to denote an array (after any implicit dereference) with the corresponding number of index positions, or shall resolve to denote an entry family of a task or protected object (in which case there shall be only one expression). The expected type for each expression is the corresponding index type. Static Semantics When the prefix denotes an array, the indexed_component denotes the component of the array with the specified index value(s). The nominal subtype of the indexed_component is the component subtype of the array type. When the prefix denotes an entry family, the indexed_component denotes the individual entry of the entry family with the specified index value. Dynamic Semantics For the evaluation of an indexed_component, the prefix and the expressions are evaluated in an arbitrary order. The value of each expression is converted to the corresponding index type. A check is made that each index value belongs to the corresponding index range of the array or entry family denoted by the prefix. Constraint_Error is raised if this check fails. 4.1 Names 13 December 2012 94 Ada Reference Manual — 2012 Edition Examples of indexed components: Examples My_Schedule(Sat) -- a component of a one-dimensional array (see 3.6.1) Page(10) -- a component of a one-dimensional array (see 3.6) Board(M, J + 1) -- a component of a two-dimensional array (see 3.6.1) Page(10)(20) -- a component of a component Request(Medium) -- an entry in a family of entries Next_Frame(L)(M, N) -- a component of a function call (see 3.6) (see 9.1) (see 6.1) NOTES 1 Notes on the examples: Distinct notations are used for components of multidimensional arrays (such as Board) and arrays of arrays (such as Page). The components of an array of arrays are arrays and can therefore be indexed. Thus Page(10)(20) denotes the 20th component of Page(10). In the last example Next_Frame(L) is a function call returning an access value that designates a two-dimensional array. 4.1.2 Slices A slice denotes a one-dimensional array formed by a sequence of consecutive components of a one- dimensional array. A slice of a variable is a variable; a slice of a constant is a constant; a slice of a value is a value. slice ::= prefix(discrete_range) Syntax Name Resolution Rules The prefix of a slice shall resolve to denote a one-dimensional array (after any implicit dereference). The expected type for the discrete_range of a slice is the index type of the array type. A slice denotes a one-dimensional array formed by the sequence of consecutive components of the array denoted by the prefix, corresponding to the range of values of the index given by the discrete_range. The type of the slice is that of the prefix. Its bounds are those defined by the discrete_range. Static Semantics Dynamic Semantics For the evaluation of a slice, the prefix and the discrete_range are evaluated in an arbitrary order. If the slice is not a null slice (a slice where the discrete_range is a null range), then a check is made that the bounds of the discrete_range belong to the index range of the array denoted by the prefix. Constraint_Error is raised if this check fails. NOTES 2 A slice is not permitted as the prefix of an Access attribute_reference, even if the components or the array as a whole are aliased. See 3.10.2. 3 For a one-dimensional array A, the slice A(N .. N) denotes an array that has only one component; its type is the type of A. On the other hand, A(N) denotes a component of the array A and has the corresponding component type. 8 9 10 1 2 3 4 5 6 7 8 9 95 13 December 2012 Indexed Components 4.1.1 10 11 1 2 3 4 5 6 7 8 9 Ada Reference Manual — 2012 Edition Examples of slices: Examples Stars(1 .. 15) -- a slice of 15 characters Page(10 .. 10 + Size) -- a slice of 1 + Size components (see 3.6) (see 3.6) Page(L)(A .. B) -- a slice of the array Page(L) (see 3.6.3) Stars(1 .. 0) -- a null slice (see 3.6.1 and 3.5.1) My_Schedule(Weekday) -- bounds given by subtype Stars(5 .. 15)(K) -- same as Stars(K) (see 3.6.3) -- provided that K is in 5 .. 15 (see 3.6.3) 4.1.3 Selected Components Selected_components are used to denote components (including discriminants), entries, entry families, and protected subprograms; they are also used as expanded names as described below. selected_component ::= prefix . selector_name selector_name ::= identifier | character_literal | operator_symbol Syntax Name Resolution Rules A selected_component is called an expanded name if, according to the visibility rules, at least one possible interpretation of its prefix denotes a package or an enclosing named construct (directly, not through a subprogram_renaming_declaration or generic_renaming_declaration). A selected_component that is not an expanded name shall resolve to denote one of the following: • A component (including a discriminant): The prefix shall resolve to denote an object or value of some non-array composite type (after any implicit dereference). The selector_name shall resolve to denote a discriminant_specification of the type, or, unless the type is a protected type, a component_declaration of the type. The selected_component denotes the corresponding component of the object or value. • A single entry, an entry family, or a protected subprogram: The prefix shall resolve to denote an object or value of some task or protected type (after any implicit dereference). The selector_name shall resolve to denote an entry_declaration or subprogram_declaration occurring (implicitly or explicitly) within the visible part of that type. The selected_component denotes the corresponding entry, entry family, or protected subprogram. 9.1/2 • A view of a subprogram whose first formal parameter is of a tagged type or is an access parameter whose designated type is tagged: 9.2/3 The prefix (after any implicit dereference) shall resolve to denote an object or value of a specific tagged type T or class-wide type T'Class. The selector_name shall resolve to denote a view of a subprogram declared immediately within the declarative region in which an ancestor of the type T is declared. The first formal parameter of the subprogram shall be of type T, or a class-wide type that covers T, or an access parameter designating one of these types. The designator of the subprogram shall not be the same as that of a component of the tagged type visible at the point of the selected_component. The subprogram shall not be an implicitly declared primitive operation of type T that overrides an inherited subprogram implemented by an entry or protected subprogram visible at the point of the selected_component. The selected_component denotes a view of this subprogram that omits the first formal parameter. This view is called a prefixed view of the subprogram, and the prefix of the selected_component (after any implicit dereference) is called the prefix of the prefixed view. 4.1.2 Slices 13 December 2012 96 Ada Reference Manual — 2012 Edition An expanded name shall resolve to denote a declaration that occurs immediately within a named declarative region, as follows: • The prefix shall resolve to denote either a package (including the current instance of a generic package, or a rename of a package), or an enclosing named construct. • The selector_name shall resolve to denote a declaration that occurs immediately within the declarative region of the package or enclosing construct (the declaration shall be visible at the place of the expanded name — see 8.3). The expanded name denotes that declaration. • If the prefix does not denote a package, then it shall be a direct_name or an expanded name, and it shall resolve to denote a program unit (other than a package), the current instance of a type, a block_statement, a loop_statement, or an accept_statement (in the case of an accept_- statement or entry_body, no family index is allowed); the expanded name shall occur within the declarative region of this construct. Further, if this construct is a callable construct and the prefix denotes more than one such enclosing callable construct, then the expanded name is ambiguous, independently of the selector_name. 10 11 12 13 Legality Rules For a subprogram whose first parameter is an access parameter, the prefix of any prefixed view shall denote an aliased view of an object. 13.1/2 For a subprogram whose first parameter is of mode in out or out, or of an anonymous access-to-variable type, the prefix of any prefixed view shall denote a variable. 13.2/2 The evaluation of a selected_component includes the evaluation of the prefix. Dynamic Semantics For a selected_component that denotes a component of a variant, a check is made that the values of the discriminants are such that the value or object denoted by the prefix has this component. The exception Constraint_Error is raised if this check fails. Examples of selected components: Examples (see 3.8) Tomorrow.Month -- a record component (see 3.10.1) Next_Car.Owner -- a record component Next_Car.Owner.Age -- a record component (see 3.10.1) -- the previous two lines involve implicit dereferences Writer.Unit -- a record component (a discriminant) (see 3.8.1) Min_Cell(H).Value -- a record component of the result -- of the function call Min_Cell(H) Cashier.Append -- a prefixed view of a procedure Control.Seize -- an entry of a protected object Pool(K).Write -- an entry of the task Pool(K) (see 3.9.4) (see 9.4) (see 9.4) (see 6.1) Examples of expanded names: Key_Manager."<" -- an operator of the visible part of a package (see 7.3.1) Dot_Product.Sum -- a variable declared in a function body Buffer.Pool -- a variable declared in a protected unit Buffer.Read -- an entry of a protected unit Swap.Temp -- a variable declared in a block statement Standard.Boolean -- the name of a predefined type (see 6.1) (see 9.11) (see 9.11) (see 5.6) (see A.1) 97 13 December 2012 Selected Components 4.1.3 14 15 16 17/2 18 19 Ada Reference Manual — 2012 Edition 4.1.4 Attributes 1 An attribute is a characteristic of an entity that can be queried via an attribute_reference or a range_- attribute_reference. 2 3/2 4 5 6 Syntax attribute_reference ::= prefix'attribute_designator attribute_designator ::= identifier[(static_expression)] | Access | Delta | Digits | Mod range_attribute_reference ::= prefix'range_attribute_designator range_attribute_designator ::= Range[(static_expression)] Name Resolution Rules In an attribute_reference, if the attribute_designator is for an attribute defined for (at least some) objects of an access type, then the prefix is never interpreted as an implicit_dereference; otherwise (and for all range_attribute_references), if the type of the name within the prefix is of an access type, the prefix is interpreted as an implicit_dereference. Similarly, if the attribute_designator is for an attribute defined for (at least some) functions, then the prefix is never interpreted as a parameterless function_call; otherwise (and for all range_attribute_references), if the prefix consists of a name that denotes a function, it is interpreted as a parameterless function_call. 7 The expression, if any, in an attribute_designator or range_attribute_designator is expected to be of any integer type. 8 The expression, if any, in an attribute_designator or range_attribute_designator shall be static. Legality Rules Static Semantics 9/3 An attribute_reference denotes a value, an object, a subprogram, or some other kind of program entity. For an attribute_reference that denotes a value or an object, if its type is scalar, then its nominal subtype is the base subtype of the type; if its type is tagged, its nominal subtype is the first subtype of the type; otherwise, its nominal subtype is a subtype of the type without any constraint or null_exclusion. Similarly, unless explicitly specified otherwise, for an attribute_reference that denotes a function, when its result type is scalar, its result subtype is the base subtype of the type, when its result type is tagged, the result subtype is the first subtype of the type, and when the result type is some other type, the result subtype is a subtype of the type without any constraint or null_exclusion. 10 A range_attribute_reference X'Range(N) is equivalent to the range X'First(N) .. X'Last(N), except that the prefix is only evaluated once. Similarly, X'Range is equivalent to X'First .. X'Last, except that the prefix is only evaluated once. 11 The evaluation of an attribute_reference (or range_attribute_reference) consists of the evaluation of the prefix. Dynamic Semantics 4.1.4 Attributes 13 December 2012 98 Ada Reference Manual — 2012 Edition An implementation may provide implementation-defined attributes; the identifier for an implementation- defined attribute shall differ from those of the language-defined attributes unless supplied for compatibility with a previous edition of this International Standard. Implementation Permissions NOTES 4 Attributes are defined throughout this International Standard, and are summarized in K.2. 5 In general, the name in a prefix of an attribute_reference (or a range_attribute_reference) has to be resolved without using any context. However, in the case of the Access attribute, the expected type for the attribute_reference has to be a single access type, and the resolution of the name can use the fact that the type of the object or the profile of the callable entity denoted by the prefix has to match the designated type or be type conformant with the designated profile of the access type. Examples of attributes: Examples Color'First -- minimum value of the enumeration type Color (see 3.5.1) (see 3.5.1) Rainbow'Base'First -- same as Color'First Real'Digits -- precision of the type Real (see 3.5.7) Board'Last(2) -- upper bound of the second dimension of Board (see 3.6.1) (see 3.6.1) Board'Range(1) -- index range of the first dimension of Board (see 9.1) Pool(K)'Terminated -- True if task Pool(K) is terminated (see 3.8) Date'Size -- number of bits for records of type Date (see 3.7.1) Message'Address -- address of the record variable Message 4.1.5 User-Defined References Static Semantics Given a discriminated type T, the following type-related operational aspect may be specified: Implicit_Dereference This aspect is specified by a name that denotes an access discriminant declared for the type T. A (view of a) type with a specified Implicit_Dereference aspect is a reference type. A reference object is an object of a reference type. The discriminant named by the Implicit_Dereference aspect is the reference discriminant of the reference type or reference object. A generalized_reference is a name that identifies a reference object, and denotes the object or subprogram designated by the reference discriminant of the reference object. Syntax generalized_reference ::= reference_object_name Name Resolution Rules The expected type for the reference_object_name in a generalized_reference is any reference type. Static Semantics A generalized_reference denotes a view equivalent to that of a dereference of the reference discriminant of the reference object. Given a reference type T, the Implicit_Dereference aspect is inherited by descendants of type T if not overridden. If a descendant type constrains the value of the reference discriminant of T by a new discriminant, that new discriminant is the reference discriminant of the descendant. If the descendant type constrains the value of the reference discriminant of T by an expression other than the name of a new 12/1 13 14/2 15 16 1/3 2/3 3/3 4/3 5/3 6/3 7/3 99 13 December 2012 Attributes 4.1.4 Ada Reference Manual — 2012 Edition 8/3 9/3 10/3 11/3 12/3 13/3 14/3 15/3 1/3 2/3 discriminant, a generalized_reference that identifies an object of the descendant type denotes the object or subprogram designated by the value of this constraining expression. Dynamic Semantics The evaluation of a generalized_reference consists of the evaluation of the reference_object_name and a determination of the object or subprogram designated by the reference discriminant of the named reference object. A check is made that the value of the reference discriminant is not the null access value. Constraint_Error is raised if this check fails. The generalized_reference denotes the object or subprogram designated by the value of the reference discriminant of the named reference object. Examples type Barrel is tagged ... -- holds objects of type Element type Ref_Element(Data : access Element) is limited private with Implicit_Dereference => Data; -- This Ref_Element type is a "reference" type. -- "Data" is its reference discriminant. function Find (B : aliased in out Barrel; Key : String) return Ref_Element; -- Return a reference to an element of a barrel. B: aliased Barrel; ... Find (B, "grape") := Element'(...); -- Assign through a reference. -- This is equivalent to: Find (B, "grape").Data.all := Element'(...); 4.1.6 User-Defined Indexing Given a tagged type T, the following type-related, operational aspects may be specified: Static Semantics Constant_Indexing This aspect shall be specified by a name that denotes one or more functions declared immediately within the same declaration list in which T is declared. All such functions shall have at least two parameters, the first of which is of type T or T'Class, or is an access-to- constant parameter with designated type T or T'Class. 3/3 Variable_Indexing This aspect shall be specified by a name that denotes one or more functions declared immediately within the same declaration list in which T is declared. All such functions shall have at least two parameters, the first of which is of type T or T'Class, or is an access parameter with designated type T or T'Class. All such functions shall have a return type that is a reference type (see 4.1.5), whose reference discriminant is of an access-to-variable type. 4/3 5/3 These aspects are inherited by descendants of T (including the class-wide type T'Class). The aspects shall not be overridden, but the functions they denote may be. An indexable container type is (a view of) a tagged type with at least one of the aspects Constant_Indexing or Variable_Indexing specified. An indexable container object is an object of an indexable container type. A generalized_indexing is a name that denotes the result of calling a function named by a Constant_Indexing or Variable_Indexing aspect. 4.1.5 User-Defined References 13 December 2012 100 Ada Reference Manual — 2012 Edition The Constant_Indexing or Variable_Indexing aspect shall not be specified: • on a derived type if the parent type has the corresponding aspect specified or inherited; or • on a full_type_declaration if the type has a tagged partial view. Legality Rules In addition to the places where Legality Rules normally apply (see 12.3), these rules apply also in the private part of an instance of a generic unit. generalized_indexing ::= indexable_container_object_prefix actual_parameter_part Syntax Name Resolution Rules The expected type for the indexable_container_object_prefix of a generalized_indexing is any indexable container type. If the Constant_Indexing aspect is specified for the type of the indexable_container_object_prefix of a generalized_indexing, then the generalized_indexing is interpreted as a constant indexing under the following circumstances: • when the Variable_Indexing aspect is not specified for the type of the indexable_container_object_prefix; • when the indexable_container_object_prefix denotes a constant; • when the generalized_indexing is used within a primary where a name denoting a constant is permitted. Otherwise, the generalized_indexing is interpreted as a variable indexing. When a generalized_indexing is interpreted as a constant (or variable) indexing, it is equivalent to a call on a prefixed view of one of the functions named by the Constant_Indexing (or Variable_Indexing) aspect of the type of the indexable_container_object_prefix with the given actual_parameter_part, and with the indexable_container_object_prefix as the prefix of the prefixed view. Examples type Indexed_Barrel is tagged ... with Variable_Indexing => Find; -- Indexed_Barrel is an indexable container type, -- Find is the generalized indexing operation. function Find (B : aliased in out Indexed_Barrel; Key : String) return Ref_Element; -- Return a reference to an element of a barrel (see 4.1.5). IB: aliased Indexed_Barrel; -- All of the following calls are then equivalent: Find (IB,"pear").Data.all := Element'(...); -- Traditional call IB.Find ("pear").Data.all := Element'(...); -- Call of prefixed view IB.Find ("pear") := Element'(...); -- Implicit dereference (see 4.1.5) IB ("pear") := Element'(...); -- Implicit indexing and dereference IB ("pear").Data.all := Element'(...); -- Implicit indexing only 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 14/3 15/3 16/3 17/3 18/3 19/3 20/3 21/3 101 13 December 2012 User-Defined Indexing 4.1.6 Ada Reference Manual — 2012 Edition 4.2 Literals 1 A literal represents a value literally, that is, by means of notation suited to its kind. A literal is either a numeric_literal, a character_literal, the literal null, or a string_literal. 2/2 This paragraph was deleted. Name Resolution Rules 3 4 5 6 For a name that consists of a character_literal, either its expected type shall be a single character type, in which case it is interpreted as a parameterless function_call that yields the corresponding value of the character type, or its expected profile shall correspond to a parameterless function with a character result type, in which case it is interpreted as the name of the corresponding parameterless function declared as part of the character type's definition (see 3.5.1). In either case, the character_literal denotes the enumeration_literal_specification. The expected type for a primary that is a string_literal shall be a single string type. Legality Rules A character_literal that is a name shall correspond to a defining_character_literal of the expected type, or of the result type of the expected profile. For each character of a string_literal with a given expected string type, there shall be a corresponding defining_character_literal of the component type of the expected string type. 7/2 This paragraph was deleted. 8/2 An integer literal is of type universal_integer. A real literal is of type universal_real. The literal null is of type universal_access. Static Semantics 9 10 11 12 The evaluation of a numeric literal, or the literal null, yields the represented value. Dynamic Semantics The evaluation of a string_literal that is a primary yields an array value containing the value of each character of the sequence of characters of the string_literal, as defined in 2.6. The bounds of this array value are determined according to the rules for positional_array_aggregates (see 4.3.3), except that for a null string literal, the upper bound is the predecessor of the lower bound. For the evaluation of a string_literal of type T, a check is made that the value of each character of the string_literal belongs to the component subtype of T. For the evaluation of a null string literal, a check is made that its lower bound is greater than the lower bound of the base range of the index type. The exception Constraint_Error is raised if either of these checks fails. NOTES 6 Enumeration literals that are identifiers rather than character_literals follow the normal rules for identifiers when used in a name (see 4.1 and 4.1.3). Character_literals used as selector_names follow the normal rules for expanded names (see 4.1.3). 4.2 Literals 13 December 2012 102 Examples of literals: Examples Ada Reference Manual — 2012 Edition 3.14159_26536 1_345 'A' "Some Text" -- a string literal -- an integer literal -- a character literal -- a real literal 4.3 Aggregates An aggregate combines component values into a composite value of an array type, record type, or record extension. aggregate ::= record_aggregate | extension_aggregate | array_aggregate Syntax Name Resolution Rules 13 14 1 2 The expected type for an aggregate shall be a single array type, record type, or record extension. 3/2 An aggregate shall not be of a class-wide type. Legality Rules Dynamic Semantics For the evaluation of an aggregate, an anonymous object is created and values for the components or ancestor part are obtained (as described in the subsequent subclause for each kind of the aggregate) and assigned into the corresponding components or ancestor part of the anonymous object. Obtaining the values and the assignments occur in an arbitrary order. The value of the aggregate is the value of this object. If an aggregate is of a tagged type, a check is made that its value belongs to the first subtype of the type. Constraint_Error is raised if this check fails. 4.3.1 Record Aggregates In a record_aggregate, a value is specified for each component of the record or record extension value, using either a named or a positional association. Syntax record_aggregate ::= (record_component_association_list) record_component_association_list ::= record_component_association {, record_component_association} | null record record_component_association ::= [component_choice_list =>] expression | component_choice_list => <> component_choice_list ::= component_selector_name {| component_selector_name} | others A record_component_association is a named component association if it has a component_choice_list; otherwise, it is a positional component association. Any positional 4 5 6 1 2 3 4/2 5 6 103 13 December 2012 Literals 4.2 Ada Reference Manual — 2012 Edition component associations shall precede any named component associations. If there is a named association with a component_choice_list of others, it shall come last. 7 In the record_component_association_list for a record_aggregate, if there is only one association, it shall be a named association. 8/2 The expected type for a record_aggregate shall be a single record type or record extension. Name Resolution Rules 9 10 11 12 13 14 15/3 16/3 For the record_component_association_list of a record_aggregate, all components of the composite value defined by the aggregate are needed; for the association list of an extension_aggregate, only those components not determined by the ancestor expression or subtype are needed (see 4.3.2). Each selector_- name in a record_component_association shall denote a needed component (including possibly a discriminant). The expected type for the expression of a record_component_association is the type of the associated component(s); the associated component(s) are as follows: • For a positional association, the component (including possibly a discriminant) in the corresponding relative position (in the declarative region of the type), counting only the needed components; • For a named association with one or more component_selector_names, the named component(s); • For a named association with the reserved word others, all needed components that are not associated with some previous association. Legality Rules If the type of a record_aggregate is a record extension, then it shall be a descendant of a record type, through one or more record extensions (and no private extensions). The reserved words null record may appear only if there are no components needed in a given record_- component_association_list. Each record_component_association other than an others choice with a <> shall have at least one associated component, and each needed component shall be associated with exactly one record_- component_association. If a record_component_association with an expression has two or more associated components, all of them shall be of the same type, or all of them shall be of anonymous access types whose subtypes statically match. 17/3 The value of a discriminant that governs a variant_part P shall be given by a static expression, unless P is nested within a variant V that is not selected by the discriminant value governing the variant_part enclosing V. 17.1/2 A record_component_association for a discriminant without a default_expression shall have an expression rather than <>. Dynamic Semantics 18 19 The evaluation of a record_aggregate consists of the evaluation of the record_component_association_- list. For the evaluation of a record_component_association_list, any per-object constraints (see 3.8) for components specified in the association list are elaborated and any expressions are evaluated and converted to the subtype of the associated component. Any constraint elaborations and expression 4.3.1 Record Aggregates 13 December 2012 104 Ada Reference Manual — 2012 Edition evaluations (and conversions) occur in an arbitrary order, except that the expression for a discriminant is evaluated (and converted) prior to the elaboration of any per-object constraint that depends on it, which in turn occurs prior to the evaluation and conversion of the expression for the component with the per-object constraint. For a record_component_association with an expression, the expression defines the value for the associated component(s). For a record_component_association with <>, if the component_declaration has a default_expression, that default_expression defines the value for the associated component(s); otherwise, the associated component(s) are initialized by default as for a stand-alone object of the component subtype (see 3.3.1). 19.1/2 The expression of a record_component_association is evaluated (and converted) once for each associated component. NOTES 7 For a record_aggregate with positional associations, expressions specifying discriminant values appear first since the known_discriminant_part is given first in the declaration of the type; they have to be in the same order as in the known_discriminant_part. Example of a record aggregate with positional associations: (4, July, 1776) -- see 3.8 Examples Examples of record aggregates with named associations: (Day => 4, Month => July, Year => 1776) (Month => July, Day => 4, Year => 1776) (Disk, Closed, Track => 5, Cylinder => 12) -- see 3.8.1 (Unit => Disk, Status => Closed, Cylinder => 9, Track => 1) Examples of component associations with several choices: (Value => 0, Succ|Pred => new Cell'(0, null, null)) -- The allocator is evaluated twice: Succ and Pred designate different cells (Value => 0, Succ|Pred => <>) -- Succ and Pred will be set to null -- see 3.10.1 -- see 3.10.1 Examples of record aggregates for tagged types (see 3.9 and 3.9.1): Expression'(null record) Literal'(Value => 0.0) Painted_Point'(0.0, Pi/2.0, Paint => Red) 4.3.2 Extension Aggregates An extension_aggregate specifies a value for a type that is a record extension by specifying a value or subtype for an ancestor of the type, followed by associations for any components not determined by the ancestor_part. extension_aggregate ::= (ancestor_part with record_component_association_list) ancestor_part ::= expression | subtype_mark Syntax 20 21 22 23 24 25 26 27/2 28 29 29.1/2 29.2/2 30 31 1 2 3 105 13 December 2012 Record Aggregates 4.3.1 Ada Reference Manual — 2012 Edition 4/2 The expected type for an extension_aggregate shall be a single type that is a record extension. If the ancestor_part is an expression, it is expected to be of any tagged type. Name Resolution Rules 5/3 5.1/3 5.2/3 5.3/3 5.4/3 6 7 8/3 9 10 11 12 Legality Rules If the ancestor_part is a subtype_mark, it shall denote a specific tagged subtype. If the ancestor_part is an expression, it shall not be dynamically tagged. The type of the extension_aggregate shall be a descendant of the type of the ancestor_part (the ancestor type), through one or more record extensions (and no private extensions). If the ancestor_part is a subtype_mark, the view of the ancestor type from which the type is descended (see 7.3.1) shall not have unknown discriminants. If the type of the ancestor_part is limited and at least one component is needed in the record_component_association_list, then the ancestor_part shall not be: • a call to a function with an unconstrained result subtype; nor • a parenthesized or qualified expression whose operand would violate this rule; nor • a conditional_expression having at least one dependent_expression that would violate this rule. Static Semantics For the record_component_association_list of an extension_aggregate, the only components needed are those of the composite value defined by the aggregate that are not inherited from the type of the ancestor_part, plus any inherited discriminants if the ancestor_part is a subtype_mark that denotes an unconstrained subtype. Dynamic Semantics For the evaluation of an extension_aggregate, the record_component_association_list is evaluated. If the ancestor_part is an expression, it is also evaluated; if the ancestor_part is a subtype_mark, the components of the value of the aggregate not given by the record_component_association_list are initialized by default as for an object of the ancestor type. Any implicit initializations or evaluations are performed in an arbitrary order, except that the expression for a discriminant is evaluated prior to any other evaluation or initialization that depends on it. If the type of the ancestor_part has discriminants and the ancestor_part is not a subtype_mark that denotes an unconstrained subtype, then a check is made that each discriminant determined by the ancestor_part has the value specified for a corresponding discriminant, if any, either in the record_- component_association_list, or in the derived_type_definition for some ancestor of the type of the extension_aggregate. Constraint_Error is raised if this check fails. NOTES 8 If all components of the value of the extension_aggregate are determined by the ancestor_part, then the record_- component_association_list is required to be simply null record. 9 If the ancestor_part is a subtype_mark, then its type can be abstract. If its type is controlled, then as the last step of evaluating the aggregate, the Initialize procedure of the ancestor type is called, unless the Initialize procedure is abstract (see 7.6). Examples of extension aggregates (for types defined in 3.9.1): Painted_Point'(Point with Red) (Point'(P) with Paint => Black) Examples 4.3.2 Extension Aggregates 13 December 2012 106 Ada Reference Manual — 2012 Edition (Expression with Left => 1.2, Right => 3.4) Addition'(Binop with null record) -- presuming Binop is of type Binary_Operation 4.3.3 Array Aggregates In an array_aggregate, a value is specified for each component of an array, either positionally or by its index. For a positional_array_aggregate, the components are given in increasing-index order, with a final others, if any, representing any remaining components. For a named_array_aggregate, the components are identified by the values covered by the discrete_choices. Syntax array_aggregate ::= positional_array_aggregate | named_array_aggregate positional_array_aggregate ::= (expression, expression {, expression}) | (expression {, expression}, others => expression) | (expression {, expression}, others => <>) named_array_aggregate ::= (array_component_association {, array_component_association}) array_component_association ::= discrete_choice_list => expression | discrete_choice_list => <> An n-dimensional array_aggregate is one that is written as n levels of nested array_aggregates (or at the bottom level, equivalent string_literals). For the multidimensional case (n >= 2) the array_aggregates (or equivalent string_literals) at the n–1 lower levels are called subaggregates of the enclosing n-dimensional array_aggregate. The expressions of the bottom level subaggregates (or of the array_aggregate itself if one-dimensional) are called the enclosing n-dimensional the array component expressions of array_aggregate. Name Resolution Rules The expected type for an array_aggregate (that is not a subaggregate) shall be a single array type. The component type of this array type is the expected type for each array component expression of the array_aggregate. The expected type for each discrete_choice in any discrete_choice_list of a named_array_aggregate is the type of the corresponding index; the corresponding index for an array_aggregate that is not a subaggregate is the first index of its type; for an (n–m)-dimensional subaggregate within an array_aggregate of an n-dimensional type, the corresponding index is the index in position m+1. 13 1 2 3/2 4 5/2 6 7/2 8 Legality Rules An array_aggregate of an n-dimensional array array_aggregate. type shall be written as an n-dimensional 9 An others choice is allowed for an array_aggregate only if an applicable index constraint applies to the array_aggregate. An applicable index constraint is a constraint provided by certain contexts where an array_aggregate is permitted that can be used to determine the bounds of the array value specified by the aggregate. Each of the following contexts (and none other) defines an applicable index constraint: • For an explicit_actual_parameter, an explicit_generic_actual_parameter, the expression of a return statement, the initialization expression in an object_declaration, or a default_expression 10 11/2 107 13 December 2012 Extension Aggregates 4.3.2 Ada Reference Manual — 2012 Edition (for a parameter or a component), when the nominal subtype of the corresponding formal parameter, generic formal parameter, function return object, object, or component is a constrained array subtype, the applicable index constraint is the constraint of the subtype; 12 13 14 • For the expression of an assignment_statement where the name denotes an array variable, the applicable index constraint is the constraint of the array variable; • For the operand of a qualified_expression whose subtype_mark denotes a constrained array subtype, the applicable index constraint is the constraint of the subtype; • For a component expression in an aggregate, if the component's nominal subtype is a constrained array subtype, the applicable index constraint is the constraint of the subtype; 15/3 • For a parenthesized expression, the applicable index constraint is that, if any, defined for the expression; 15.1/3 • For a conditional_expression, the applicable index constraint for each dependent_expression is that, if any, defined for the conditional_expression. 16 17/3 18/3 19 20 21 22 23 The applicable index constraint applies to an array_aggregate that appears in such a context, as well as to any subaggregates thereof. In the case of an explicit_actual_parameter (or default_expression) for a call on a generic formal subprogram, no applicable index constraint is defined. The discrete_choice_list of an array_component_association is allowed to have a discrete_choice that is a nonstatic choice_expression or that is a subtype_indication or range that defines a nonstatic or null range, only if it is the single discrete_choice of its discrete_choice_list, and there is only one array_component_association in the array_aggregate. In a named_array_aggregate where all discrete_choices are static, no two discrete_choices are allowed to cover the same value (see 3.8.1); if there is no others choice, the discrete_choices taken together shall exactly cover a contiguous sequence of values of the corresponding index type. A bottom level subaggregate of a multidimensional array_aggregate of a given array type is allowed to be a string_literal only if the component type of the array type is a character type; each character of such a string_literal shall correspond to a defining_character_literal of the component type. A subaggregate that is a string_literal is equivalent to one that is a positional_array_aggregate of the same length, with each expression being the character_literal for the corresponding character of the string_literal. Static Semantics Dynamic Semantics The evaluation of an array_aggregate of a given array type proceeds in two steps: 1. Any discrete_choices of this aggregate and of its subaggregates are evaluated in an arbitrary order, and converted to the corresponding index type; 2. The array component expressions of the aggregate are evaluated in an arbitrary order and their values are converted to the component subtype of the array type; an array component expression is evaluated once for each associated component. 23.1/2 Each expression in an array_component_association defines the value for the associated component(s). For an array_component_association with <>, the associated component(s) are initialized by default as for a stand-alone object of the component subtype (see 3.3.1). 24 The bounds of the index range of an array_aggregate (including a subaggregate) are determined as follows: 4.3.3 Array Aggregates 13 December 2012 108 Ada Reference Manual — 2012 Edition • For an array_aggregate with an others choice, the bounds are those of the corresponding index range from the applicable index constraint; • For a positional_array_aggregate (or equivalent string_literal) without an others choice, the lower bound is that of the corresponding index range in the applicable index constraint, if defined, or that of the corresponding index subtype, if not; in either case, the upper bound is determined from the lower bound and the number of expressions (or the length of the string_literal); • For a named_array_aggregate without an others choice, the bounds are determined by the smallest and largest index values covered by any discrete_choice_list. For an array_aggregate, a check is made that the index range defined by its bounds is compatible with the corresponding index subtype. 25 26 27 28 For an array_aggregate with an others choice, a check is made that no expression or <> is specified for an index value outside the bounds determined by the applicable index constraint. 29/3 For a multidimensional array_aggregate, a check is made that all subaggregates that correspond to the same index have the same bounds. The exception Constraint_Error is raised if any of the above checks fail. NOTES 10 In an array_aggregate, positional notation may only be used with two or more expressions; a single expression in parentheses is interpreted as a parenthesized expression. A named_array_aggregate, such as (1 => X), may be used to specify an array with a single component. Examples of array aggregates with positional associations: (7, 9, 5, 1, 3, 2, 4, 8, 6, 0) Table'(5, 8, 4, 1, others => 0) -- see 3.6 Examples Examples of array aggregates with named associations: (1 .. 5 => (1 .. 8 => 0.0)) -- two-dimensional (1 .. N => new Cell) -- N new cells, in particular for N = 0 Table'(2 | 4 | 10 => 1, others => 0) Schedule'(Mon .. Fri => True, others => False) -- see 3.6 Schedule'(Wed | Sun => False, others => True) Vector'(1 => 2.5) -- single-component vector Examples of two-dimensional array aggregates: -- Three aggregates for the same value of subtype Matrix(1..2,1..3) (see 3.6): ((1.1, 1.2, 1.3), (2.1, 2.2, 2.3)) (1 => (1.1, 1.2, 1.3), 2 => (2.1, 2.2, 2.3)) (1 => (1 => 1.1, 2 => 1.2, 3 => 1.3), 2 => (1 => 2.1, 2 => 2.2, 3 => 2.3)) Examples of aggregates as initial values: A : Table := (7, 9, 5, 1, 3, 2, 4, 8, 6, 0); -- A(1)=7, A(10)=0 B : Table := (2 | 4 | 10 => 1, others => 0); -- B(1)=0, B(10)=1 C : constant Matrix := (1 .. 5 => (1 .. 8 => 0.0)); -- C'Last(1)=5, C'Last(2)=8 D : Bit_Vector(M .. N) := (M .. N => True); -- see 3.6 E : Bit_Vector(M .. N) := (others => True); F : String(1 .. 1) := (1 => 'F'); -- a one component aggregate: same as "F" 30 31 32/3 33 34 35 36 37 38 39 40 41 42 43 109 13 December 2012 Array Aggregates 4.3.3 Ada Reference Manual — 2012 Edition Example of an array aggregate with defaulted others choice and with an applicable index constraint provided by an enclosing record aggregate: Buffer'(Size => 50, Pos => 1, Value => String'('x', others => <>)) -- see 3.7 4.4 Expressions An expression is a formula that defines the computation or retrieval of a value. In this International Standard, the term “expression” refers to a construct of the syntactic category expression or of any of the following categories: choice_expression, choice_relation, relation, simple_expression, term, factor, primary, conditional_expression, quantified_expression. expression ::= relation {and relation} | relation {and then relation} | relation {or relation} | relation {xor relation} | relation {or else relation} Syntax choice_expression ::= choice_relation {and choice_relation} | choice_relation {or choice_relation} | choice_relation {xor choice_relation} | choice_relation {and then choice_relation} | choice_relation {or else choice_relation} choice_relation ::= simple_expression [relational_operator simple_expression] relation ::= simple_expression [relational_operator simple_expression] | simple_expression [not] in membership_choice_list membership_choice_list ::= membership_choice {| membership_choice} membership_choice ::= choice_expression | range | subtype_mark simple_expression ::= [unary_adding_operator] term {binary_adding_operator term} term ::= factor {multiplying_operator factor} factor ::= primary [** primary] | abs primary | not primary primary ::= numeric_literal | null | string_literal | aggregate | name | allocator | (expression) | (conditional_expression) | (quantified_expression) A name used as a primary shall resolve to denote an object or a value. Name Resolution Rules Each expression has a type; it specifies the computation or retrieval of a value of that type. Static Semantics 44/2 45/2 1/3 2 2.1/3 2.2/3 3/3 3.1/3 3.2/3 4 5 6 7/3 8 9 10 The value of a primary that is a name denoting an object is the value of the object. Dynamic Semantics 4.3.3 Array Aggregates 13 December 2012 110 Ada Reference Manual — 2012 Edition For the evaluation of a primary that is a name denoting an object of an unconstrained numeric subtype, if the value of the object is outside the base range of its type, the implementation may either raise Constraint_Error or return the value of the object. Implementation Permissions Examples Examples of primaries: 4.0 -- real literal Pi -- named number (1 .. 10 => 0) -- array aggregate Sum -- variable Integer'Last -- attribute Sine(X) -- function call Color'(Blue) -- qualified expression Real(M*N) -- conversion (Line_Count + 10) -- parenthesized expression Examples of expressions: Volume -- primary not Destroyed -- factor 2*Line_Count -- term -4.0 -- simple expression -4.0 + A -- simple expression B**2 - 4.0*A*C -- simple expression R*Sin(θ)*Cos(φ) -- simple expression Password(1 .. 3) = "Bwv" -- relation Count in Small_Int -- relation Count not in Small_Int -- relation Index = 0 or Item_Hit -- expression (Cold and Sunny) or Warm -- expression (parentheses are required) A**(B**C) -- expression (parentheses are required) 4.5 Operators and Expression Evaluation The language defines the following six categories of operators (given in order of increasing precedence). The corresponding operator_symbols, and only those, can be used as designators in declarations of functions for user-defined operators. See 6.6, “Overloading of Operators”. logical_operator ::= relational_operator ::= binary_adding_operator ::= unary_adding_operator ::= Syntax and | or | xor = | /= | < | <= | > | >= + | – | & + | – multiplying_operator ::= * | / | mod | rem highest_precedence_operator ::= ** | abs | not Static Semantics For a sequence of operators of the same precedence level, the operators are associated with their operands in textual order from left to right. Parentheses can be used to impose specific associations. For each form of type definition, certain of the above operators are predefined; that is, they are implicitly declared immediately after the type definition. For each such implicit operator declaration, the parameters are called Left and Right for binary operators; the single parameter is called Right for unary operators. An 111 13 December 2012 Expressions 4.4 11 12 13 14 15/2 1 2 3 4 5 6 7 8 9 Ada Reference Manual — 2012 Edition expression of the form X op Y, where op is a binary operator, is equivalent to a function_call of the form "op"(X, Y). An expression of the form op Y, where op is a unary operator, is equivalent to a function_call of the form "op"(Y). The predefined operators and their effects are described in subclauses 4.5.1 through 4.5.6. Dynamic Semantics The predefined operations on integer types either yield the mathematically correct result or raise the exception Constraint_Error. For implementations that support the Numerics Annex, the predefined operations on real types yield results whose accuracy is defined in Annex G, or raise the exception Constraint_Error. Implementation Requirements The implementation of a predefined operator that delivers a result of an integer or fixed point type may raise Constraint_Error only if the result is outside the base range of the result type. The implementation of a predefined operator that delivers a result of a floating point type may raise Constraint_Error only if the result is outside the safe range of the result type. Implementation Permissions For a sequence of predefined operators of the same precedence level (and in the absence of parentheses imposing a specific association), an implementation may impose any association of the operators with operands so long as the result produced is an allowed result for the left-to-right association, but ignoring the potential for failure of language-defined checks in either the left-to-right or chosen order of association. NOTES 11 The two operands of an expression of the form X op Y, where op is a binary operator, are evaluated in an arbitrary order, as for any function_call (see 6.4). Examples of precedence: Examples not Sunny or Warm -- same as (not Sunny) or Warm X > 4.0 and Y > 0.0 -- same as (X > 4.0) and (Y > 0.0) -4.0*A**2 -- same as –(4.0 * (A**2)) abs(1 + A) + B -- same as (abs (1 + A)) + B Y**(-3) -- parentheses are necessary A / B * C -- same as (A/B)*C A + (B + C) -- evaluate B + C before adding it to A 4.5.1 Logical Operators and Short-circuit Control Forms An expression consisting of two relations connected by and then or or else (a short-circuit control form) shall resolve to be of some boolean type; the expected type for both relations is that same boolean type. Name Resolution Rules The following logical operators are predefined for every boolean type T, for every modular type T, and for every one-dimensional array type T whose component type is a boolean type: Static Semantics function "and"(Left, Right : T) return T function "or" (Left, Right : T) return T function "xor"(Left, Right : T) return T 4.5 Operators and Expression Evaluation 13 December 2012 112 10 11 12 13 14 15 16 17 1 2 3 Ada Reference Manual — 2012 Edition For boolean types, the predefined logical operators and, or, and xor perform the conventional operations of conjunction, inclusive disjunction, and exclusive disjunction, respectively. For modular types, the predefined logical operators are defined on a bit-by-bit basis, using the binary representation of the value of the operands to yield a binary representation for the result, where zero represents False and one represents True. If this result is outside the base range of the type, a final subtraction by the modulus is performed to bring the result into the base range of the type. The logical operators on arrays are performed on a component-by-component basis on matching components (as for equality — see 4.5.2), using the predefined logical operator for the component type. The bounds of the resulting array are those of the left operand. Dynamic Semantics The short-circuit control forms and then and or else deliver the same result as the corresponding predefined and and or operators for boolean types, except that the left operand is always evaluated first, and the right operand is not evaluated if the value of the left operand determines the result. For the logical operators on arrays, a check is made that for each component of the left operand there is a matching component of the right operand, and vice versa. Also, a check is made that each component of the result belongs to the component subtype. The exception Constraint_Error is raised if either of the above checks fails. NOTES 12 The conventional meaning of the logical operators is given by the following truth table: A True True False False B True False True False (A and B) (A or B) (A xor B) True False False False Examples True True True False False True True False Examples of logical operators: Sunny or Warm Filter(1 .. 10) and Filter(15 .. 24) -- see 3.6.1 Examples of short-circuit control forms: Next_Car.Owner /= null and then Next_Car.Owner.Age > 25 -- see 3.10.1 N = 0 or else A(N) = Hit_Value 4.5.2 Relational Operators and Membership Tests The equality operators = (equals) and /= (not equals) are predefined for nonlimited types. The other relational_operators are the ordering operators < (less than), <= (less than or equal), > (greater than), and >= (greater than or equal). The ordering operators are predefined for scalar types, and for discrete array types, that is, one-dimensional array types whose components are of a discrete type. A membership test, using in or not in, determines whether or not a value belongs to any given subtype or range, is equal to any given value, has a tag that identifies a type that is covered by a given type, or is convertible to and has an accessibility level appropriate for a given access type. Membership tests are allowed for all types. 4 5 6 7 8 9 10 11 12 13 14 1 2/3 113 13 December 2012 Logical Operators and Short-circuit Control Forms 4.5.1 Ada Reference Manual — 2012 Edition Name Resolution Rules 3/3 3.1/3 tested type of a membership The the membership_choice_list. Either all membership_choices of the membership_choice_list shall resolve to the same type, which is the tested type; or each membership_choice shall be of an elementary type, and the tested type shall be covered by each of these elementary types. the membership_choices of is determined by test If the tested type is tagged, then the simple_expression shall resolve to be of a type that is convertible (see 4.6) to the tested type; if untagged, the expected type for the simple_expression is the tested type. The expected type of a choice_expression in a membership_choice, and of a simple_expression of a range in a membership_choice, is the tested type of the membership operation. 4 For a membership test, if the simple_expression is of a tagged class-wide type, then the tested type shall be (visibly) tagged. 4.1/3 If a membership test includes one or more choice_expressions and the tested type of the membership test is limited, then the tested type of the membership test shall have a visible primitive equality operator. Legality Rules 5 6 7 7.1/2 7.2/2 8 9 9.1/2 The result type of a membership test is the predefined type Boolean. Static Semantics The equality operators are predefined for every specific type T that is not limited, and not an anonymous access type, with the following specifications: function "=" (Left, Right : T) return Boolean function "/="(Left, Right : T) return Boolean The following additional equality operators for the universal_access type are declared in package Standard for use with anonymous access types: function "=" (Left, Right : universal_access) return Boolean function "/="(Left, Right : universal_access) return Boolean The ordering operators are predefined for every specific scalar type T, and for every discrete array type T, with the following specifications: function "<" (Left, Right : T) return Boolean function "<="(Left, Right : T) return Boolean function ">" (Left, Right : T) return Boolean function ">="(Left, Right : T) return Boolean Name Resolution Rules At least one of the operands of an equality operator for universal_access shall be of a specific anonymous access type. Unless the predefined equality operator is identified using an expanded name with prefix denoting the package Standard, neither operand shall be of an access-to-object type whose designated type is D or D'Class, where D has a user-defined primitive equality operator such that: 9.2/2 9.3/3 • • its result type is Boolean; it is declared immediately within the same declaration list as D or any partial or incomplete view of D; and 9.4/2 • at least one of its operands is an access parameter with designated type D. 9.5/2 At least one of the operands of the equality operators for universal_access shall be of type universal_access, or both shall be of access-to-object types, or both shall be of access-to-subprogram types. Further: Legality Rules 4.5.2 Relational Operators and Membership Tests 13 December 2012 114 Ada Reference Manual — 2012 Edition • When both are of access-to-object types, the designated types shall be the same or one shall cover the other, and if the designated types are elementary or array types, then the designated subtypes shall statically match; • When both are of access-to-subprogram types, the designated profiles shall be subtype conformant. If the profile of an explicitly declared primitive equality operator of an untagged record type is type conformant with that of the corresponding predefined equality operator, the declaration shall occur before the type is frozen. In addition, if the untagged record type has a nonlimited partial view, then the declaration shall occur in the visible part of the enclosing package. In addition to the places where Legality Rules normally apply (see 12.3), this rule applies also in the private part of an instance of a generic unit. Dynamic Semantics For discrete types, the predefined relational operators are defined in terms of corresponding mathematical operations on the position numbers of the values of the operands. For real types, the predefined relational operators are defined in terms of the corresponding mathematical operations on the values of the operands, subject to the accuracy of the type. Two access-to-object values are equal if they designate the same object, or if both are equal to the null value of the access type. Two access-to-subprogram values are equal if they are the result of the same evaluation of an Access attribute_reference, or if both are equal to the null value of the access type. Two access-to-subprogram values are unequal if they designate different subprograms. It is unspecified whether two access values that designate the result of distinct evaluations of Access attribute_references are equal or unequal. the same subprogram but are 9.6/2 9.7/2 9.8/3 10 11 12 13 For a type extension, predefined equality is defined in terms of the primitive (possibly user-defined) equals operator for the parent type and for any components that have a record type in the extension part, and predefined equality for any other components not inherited from the parent type. 14/3 For a derived type whose parent is an untagged record type, predefined equality is defined in terms of the primitive (possibly user-defined) equals operator of the parent type. 14.1/3 For a private type, if its full type is a record type, predefined equality is defined in terms of the primitive equals operator of the full type; otherwise, predefined equality for the private type is that of its full type. 15/3 For other composite types, the predefined equality operators (and certain other predefined operations on composite types — see 4.5.1 and 4.6) are defined in terms of the corresponding operation on matching components, defined as follows: • For two composite objects or values of the same non-array type, matching components are those that correspond to the same component_declaration or discriminant_specification; • For two one-dimensional arrays of the same type, matching components are those (if any) whose index values match in the following sense: the lower bounds of the index ranges are defined to match, and the successors of matching indices are defined to match; • For two multidimensional arrays of the same type, matching components are those whose index values match in successive index positions. The analogous definitions apply if the types of the two objects or values are convertible, rather than being the same. 16 17 18 19 20 115 13 December 2012 Relational Operators and Membership Tests 4.5.2 Ada Reference Manual — 2012 Edition 21 22 23 24/3 Given the above definition of matching components, the result of the predefined equals operator for composite types (other than for those composite types covered earlier) is defined as follows: • If there are no components, the result is defined to be True; • If there are unmatched components, the result is defined to be False; • Otherwise, the result is defined in terms of the primitive equals operator for any matching components that are records, and the predefined equals for any other matching components. 24.1/3 If the primitive equals operator for an untagged record type is abstract, then Program_Error is raised at the point of any (implicit) call to that abstract subprogram. 24.2/1 For any composite type, the order in which "=" is called for components is unspecified. Furthermore, if the result can be determined before calling "=" on some components, it is unspecified whether "=" is called on those components. 25 The predefined "/=" operator gives the complementary result to the predefined "=" operator. 26/3 For a discrete array type, the predefined ordering operators correspond to lexicographic order using the predefined order relation of the component type: A null array is lexicographically less than any array having at least one component. In the case of nonnull arrays, the left operand is lexicographically less than the right operand if the first component of the left operand is less than that of the right; otherwise, the left operand is lexicographically less than the right operand only if their first components are equal and the tail of the left operand is lexicographically less than that of the right (the tail consists of the remaining components beyond the first and can be null). 26.1/3 An individual membership test is the membership test of a single membership_choice. 27/3 For the evaluation of a membership test using in whose membership_choice_list has a single membership_choice, the simple_expression and the membership_choice are evaluated in an arbitrary order; the result is the result of the individual membership test for the membership_choice. 27.1/3 For the evaluation of a membership test using in whose membership_choice_list has more than one membership_choice, the simple_expression of the membership test is evaluated first and the result of the operation is equivalent to that of a sequence consisting of an individual membership test on each membership_choice combined with the short-circuit control form or else. 28/3 An individual membership test yields the result True if: 28.1/3 • The membership_choice is a choice_expression, and the simple_expression is equal to the value of the membership_choice. If the tested type is a record type or a limited type, the test uses the primitive equality for the type; otherwise, the test uses predefined equality. 28.2/3 • The membership_choice is a range and the value of the simple_expression belongs to the given range. 29/3 30/3 30.1/2 • The membership_choice is a subtype_mark, the tested type is scalar, the value of the simple_expression belongs to the range of the named subtype, and the predicate of the named subtype evaluates to True. • The membership_choice is a subtype_mark, the tested type is not scalar, the value of the simple_expression satisfies any constraints of the named subtype, the predicate of the named subtype evaluates to True, and: • if the type of the simple_expression is class-wide, the value has a tag that identifies a type covered by the tested type; 4.5.2 Relational Operators and Membership Tests 13 December 2012 116 Ada Reference Manual — 2012 Edition • • if the tested type is an access type and the named subtype excludes null, the value of the simple_expression is not null; if the tested type is a general access-to-object type, the type of the simple_expression is convertible to the tested type and its accessibility level is no deeper than that of the tested type; further, if the designated type of the tested type is tagged and the simple_expression is nonnull, the tag of the object designated by the value of the simple_expression is covered by the designated type of the tested type. Otherwise, the test yields the result False. A membership test using not in gives the complementary result to the corresponding membership test using in. 30.2/3 30.3/3 31/3 32 For all nonlimited types declared in language-defined packages, the "=" and "/=" operators of the type shall behave as if they were the predefined equality operators for the purposes of the equality of composite types and generic formal types. 32.1/1 Implementation Requirements NOTES This paragraph was deleted. 13 If a composite type has components that depend on discriminants, two values of this type have matching components if and only if their discriminants are equal. Two nonnull arrays have matching components if and only if the length of each dimension is the same for both. Examples of expressions involving relational operators and membership tests: Examples X /= Y "" < "A" and "A" < "Aa" -- True "Aa" < "B" and "A" < "A " -- True My_Car = null -- True if My_Car has been set to null (see 3.10.1) My_Car = Your_Car -- True if we both share the same car My_Car.all = Your_Car.all -- True if the two cars are identical N not in 1 .. 10 -- range membership test Today in Mon .. Fri -- range membership test Today in Weekday -- subtype membership test (see 3.5.1) Card in Clubs | Spades -- list membership test (see 3.5.1) Archive in Disk_Unit -- subtype membership test (see 3.8.1) Tree.all in Addition'Class -- class membership test (see 3.9.1) 4.5.3 Binary Adding Operators Static Semantics The binary adding operators + (addition) and – (subtraction) are predefined for every specific numeric type T with their conventional meaning. They have the following specifications: function "+"(Left, Right : T) return T function "-"(Left, Right : T) return T The concatenation operators & are predefined for every nonlimited, one-dimensional array type T with component type C. They have the following specifications: function "&"(Left : T; Right : T) return T function "&"(Left : T; Right : C) return T function "&"(Left : C; Right : T) return T function "&"(Left : C; Right : C) return T 117 13 December 2012 Relational Operators and Membership Tests 4.5.2 33/2 34 35 36 37 38/3 39/3 1 2 3 4 Ada Reference Manual — 2012 Edition Dynamic Semantics For the evaluation of a concatenation with result type T, if both operands are of type T, the result of the concatenation is a one-dimensional array whose length is the sum of the lengths of its operands, and whose components comprise the components of the left operand followed by the components of the right operand. If the left operand is a null array, the result of the concatenation is the right operand. Otherwise, the lower bound of the result is determined as follows: • If the ultimate ancestor of the array type was defined by a constrained_array_definition, then the lower bound of the result is that of the index subtype; • If the ultimate ancestor of the array type was defined by an unconstrained_array_definition, then the lower bound of the result is that of the left operand. The upper bound is determined by the lower bound and the length. A check is made that the upper bound of the result of the concatenation belongs to the range of the index subtype, unless the result is a null array. Constraint_Error is raised if this check fails. If either operand is of the component type C, the result of the concatenation is given by the above rules, using in place of such an operand an array having this operand as its only component (converted to the component subtype) and having the lower bound of the index subtype of the array type as its lower bound. The result of a concatenation is defined in terms of an assignment to an anonymous object, as for any function call (see 6.5). NOTES 14 As for all predefined operators on modular types, the binary adding operators + and – on modular types include a final reduction modulo the modulus if the result is outside the base range of the type. Examples Examples of expressions involving binary adding operators: Z + 0.1 -- Z has to be of a real type "A" & "BCD" -- concatenation of two string literals 'A' & "BCD" -- concatenation of a character literal and a string literal 'A' & 'A' -- concatenation of two character literals 4.5.4 Unary Adding Operators Static Semantics The unary adding operators + (identity) and – (negation) are predefined for every specific numeric type T with their conventional meaning. They have the following specifications: function "+"(Right : T) return T function "-"(Right : T) return T NOTES 15 For modular integer types, the unary adding operator –, when given a nonzero operand, returns the result of subtracting the value of the operand from the modulus; for a zero operand, the result is zero. 4.5.5 Multiplying Operators Static Semantics The multiplying operators * (multiplication), / (division), mod (modulus), and rem (remainder) are predefined for every specific integer type T: 5 6 7 8 9 10 11 12 13 14 1 2 3 1 4.5.3 Binary Adding Operators 13 December 2012 118 Ada Reference Manual — 2012 Edition function "*" (Left, Right : T) return T function "/" (Left, Right : T) return T function "mod"(Left, Right : T) return T function "rem"(Left, Right : T) return T Signed integer multiplication has its conventional meaning. Signed integer division and remainder are defined by the relation: A = (A/B)*B + (A rem B) where (A rem B) has the sign of A and an absolute value less than the absolute value of B. Signed integer division satisfies the identity: (-A)/B = -(A/B) = A/(-B) 2 3 4 5 6 7 The signed integer modulus operator is defined such that the result of A mod B is either zero, or has the sign of B and an absolute value less than the absolute value of B; in addition, for some signed integer value N, this result satisfies the relation: 8/3 A = B*N + (A mod B) The multiplying operators on modular types are defined in terms of the corresponding signed integer operators, followed by a reduction modulo the modulus if the result is outside the base range of the type (which is only possible for the "*" operator). Multiplication and division operators are predefined for every specific floating point type T: function "*"(Left, Right : T) return T function "/"(Left, Right : T) return T The following multiplication and division operators, with an operand of the predefined type Integer, are predefined for every specific fixed point type T: function "*"(Left : T; Right : Integer) return T function "*"(Left : Integer; Right : T) return T function "/"(Left : T; Right : Integer) return T All of the above multiplying operators are usable with an operand of an appropriate universal numeric type. The following additional multiplying operators for root_real are predefined, and are usable when both operands are of an appropriate universal or root numeric type, and the result is allowed to be of type root_real, as in a number_declaration: function "*"(Left, Right : root_real) return root_real function "/"(Left, Right : root_real) return root_real function "*"(Left : root_real; Right : root_integer) return root_real function "*"(Left : root_integer; Right : root_real) return root_real function "/"(Left : root_real; Right : root_integer) return root_real Multiplication and division between any two fixed point types are provided by the following two predefined operators: function "*"(Left, Right : universal_fixed) return universal_fixed function "/"(Left, Right : universal_fixed) return universal_fixed 9 10 11 12 13 14 15 16 17 18 19 Name Resolution Rules The above two fixed-fixed multiplying operators shall not be used in a context where the expected type for the result is itself universal_fixed — the context has to identify some other numeric type to which the result is to be converted, either explicitly or implicitly. Unless the predefined universal operator is identified using an expanded name with prefix denoting the package Standard, an explicit conversion is required on the result when using the above fixed-fixed multiplication operator if either operand is of a type having a user-defined primitive multiplication operator such that: 19.1/2 119 13 December 2012 Multiplying Operators 4.5.5 Ada Reference Manual — 2012 Edition 19.2/3 • it is declared immediately within the same declaration list as the type or any partial or incomplete view thereof; and 19.3/2 • both of its formal parameters are of a fixed-point type. 19.4/2 A corresponding requirement applies to the universal fixed-fixed division operator. Paragraph 20 was deleted. Dynamic Semantics The multiplication and division operators for real types have their conventional meaning. For floating point types, the accuracy of the result is determined by the precision of the result type. For decimal fixed point types, the result is truncated toward zero if the mathematical result is between two multiples of the small of the specific result type (possibly determined by context); for ordinary fixed point types, if the mathematical result is between two multiples of the small, it is unspecified which of the two is the result. The exception Constraint_Error is raised by integer division, rem, and mod if the right operand is zero. Similarly, for a real type T with T'Machine_Overflows True, division by zero raises Constraint_Error. NOTES 16 For positive A and B, A/B is the quotient and A rem B is the remainder when A is divided by B. The following relations are satisfied by the rem operator: A rem (-B) = A rem B (-A) rem B = -(A rem B) 17 For any signed integer K, the following identity holds: A mod B = (A + K*B) mod B The relations between signed integer division, remainder, and modulus are illustrated by the following table: A B A/B A rem B A mod B A B A/B A rem B A mod B 10 5 2 0 0 -10 5 -2 0 0 11 5 2 1 1 -11 5 -2 -1 4 12 5 2 2 2 -12 5 -2 -2 3 13 5 2 3 3 -13 5 -2 -3 2 14 5 2 4 4 -14 5 -2 -4 1 A B A/B A rem B A mod B A B A/B A rem B A mod B 10 -5 -2 0 0 -10 -5 2 0 0 11 -5 -2 1 -4 -11 -5 2 -1 -1 12 -5 -2 2 -3 -12 -5 2 -2 -2 13 -5 -2 3 -2 -13 -5 2 -3 -3 14 -5 -2 4 -1 -14 -5 2 -4 -4 Examples of expressions involving multiplying operators: Examples I : Integer := 1; J : Integer := 2; K : Integer := 3; X : Real := 1.0; -- see 3.5.7 Y : Real := 2.0; F : Fraction := 0.25; -- see 3.5.9 G : Fraction := 0.5; 21 22 23 24 25 26 27 28 29 30 31 32 33 34 4.5.5 Multiplying Operators 13 December 2012 120 Expression Value Result Type 35 Ada Reference Manual — 2012 Edition I*J 2 K/J 1 1 K mod J same as I and J, that is, Integer same as K and J, that is, Integer same as K and J, that is, Integer X/Y 0.5 F/2 0.125 same as X and Y, that is, Real same as F, that is, Fraction 3*F 0.75 0.75*G 0.375 Fraction(F*G) Real(J)*Y 0.125 4.0 same as F, that is, Fraction universal_fixed, implicitly convertible to any fixed point type Fraction, as stated by the conversion Real, the type of both operands after conversion of J 4.5.6 Highest Precedence Operators Static Semantics The highest precedence unary operator abs (absolute value) is predefined for every specific numeric type T, with the following specification: function "abs"(Right : T) return T The highest precedence unary operator not (logical negation) is predefined for every boolean type T, every modular type T, and for every one-dimensional array type T whose components are of a boolean type, with the following specification: function "not"(Right : T) return T The result of the operator not for a modular type is defined as the difference between the high bound of the base range of the type and the value of the operand. For a binary modulus, this corresponds to a bit- wise complement of the binary representation of the value of the operand. The operator not that applies to a one-dimensional array of boolean components yields a one-dimensional boolean array with the same bounds; each component of the result is obtained by logical negation of the corresponding component of the operand (that is, the component that has the same index value). A check is made that each component of the result belongs to the component subtype; the exception Constraint_Error is raised if this check fails. The highest precedence exponentiation operator ** is predefined for every specific integer type T with the following specification: function "**"(Left : T; Right : Natural) return T Exponentiation is also predefined for every specific floating point type as well as root_real, with the following specification (where T is root_real or the floating point type): function "**"(Left : T; Right : Integer'Base) return T The right operand of an exponentiation is the exponent. The value of X**N with the value of the exponent N positive is the same as the value of X*X*...X (with N–1 multiplications) except that the multiplications are associated in an arbitrary order. With N equal to zero, the result is one. With the value of N negative (only defined for a floating point operand), the result is the reciprocal of the result using the absolute value of N as the exponent. 1 2 3 4 5 6 7 8 9 10 11/3 The implementation of exponentiation for the case of a negative exponent is allowed to raise Constraint_Error if the intermediate result of the repeated multiplications is outside the safe range of the 12 Implementation Permissions 121 13 December 2012 Multiplying Operators 4.5.5 Ada Reference Manual — 2012 Edition type, even though the final result (after taking the reciprocal) would not be. (The best machine approximation to the final result in this case would generally be 0.0.) NOTES 18 As implied by the specification given above for exponentiation of an integer type, a check is made that the exponent is not negative. Constraint_Error is raised if this check fails. 4.5.7 Conditional Expressions A conditional_expression selects for evaluation at most one of the enclosed dependent_expressions, depending on a decision among the alternatives. One kind of conditional_expression is the if_expression, which selects for evaluation a dependent_expression depending on the value of one or more corresponding conditions. The other kind of conditional_expression is the case_expression, which selects for evaluation one of a number of alternative dependent_expressions; the chosen alternative is determined by the value of a selecting_expression. conditional_expression ::= if_expression | case_expression Syntax if_expression ::= if condition then dependent_expression {elsif condition then dependent_expression} [else dependent_expression] condition ::= boolean_expression case_expression ::= case selecting_expression is case_expression_alternative {, case_expression_alternative} case_expression_alternative ::= when discrete_choice_list => dependent_expression Wherever the Syntax Rules allow an expression, a conditional_expression may be used in place of the expression, so long as it is immediately surrounded by parentheses. Name Resolution Rules If a conditional_expression is expected to be of a type T, then each dependent_expression of the conditional_expression is expected to be of type T. Similarly, if a conditional_expression is expected to be of some class of types, then each dependent_expression of the conditional_expression is subject to the same expectation. If a conditional_expression shall resolve then each dependent_expression shall resolve to be of type T. to be of a type T, 13 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 The possible types of a conditional_expression are further determined as follows: 10/3 • If the conditional_expression is the operand of a type conversion, the type of the conditional_expression is the target type of the conversion; otherwise, 11/3 • If all of the dependent_expressions are of the same type, the type of the conditional_expression is that type; otherwise, 12/3 • If a dependent_expression is of an elementary type, the type of the conditional_expression shall be covered by that type; otherwise, 13/3 • If the conditional_expression is expected to be of type T or shall resolve to type T, then the conditional_expression is of type T. 4.5.6 Highest Precedence Operators 13 December 2012 122 Ada Reference Manual — 2012 Edition A condition is expected to be of any boolean type. The expected type for the selecting_expression and the discrete_choices are as for case statements (see 5.4). 14/3 15/3 All of the dependent_expressions shall be convertible (see 4.6) to the type of the conditional_expression. 16/3 Legality Rules the expected type of a conditional_expression the If dependent_expressions of the conditional_expression shall be dynamically tagged, or none shall be dynamically tagged. In this case, the conditional_expression is dynamically tagged if all of the dependent_expressions are dynamically tagged, is tag-indeterminate if all of the dependent_expressions are tag-indeterminate, and is statically tagged otherwise. is a specific type, all of tagged If there is no else dependent_expression, the if_expression shall be of a boolean type. All Legality Rules that apply to the discrete_choices of a case_statement (see 5.4) also apply to the discrete_choices of a case_expression except within an instance of a generic unit. Dynamic Semantics For the evaluation of an if_expression, the condition specified after if, and any conditions specified after elsif, are evaluated in succession (treating a final else as elsif True then), until one evaluates to True or all conditions are evaluated and yield False. If a condition evaluates the associated dependent_expression is evaluated, converted to the type of the if_expression, and the resulting value is the value of the if_expression. Otherwise (when there is no else clause), the value of the if_expression is True. to True, For the evaluation of a case_expression, the selecting_expression is first evaluated. If the value of the selecting_expression is covered by the discrete_choice_list of some case_expression_alternative, then the dependent_expression of the case_expression_alternative is evaluated, converted to the type of the case_expression, and the resulting value is the value of the case_expression. Otherwise (the value is not covered by any discrete_choice_list, perhaps due to being outside the base range), Constraint_Error is raised. 4.5.8 Quantified Expressions quantified_expression ::= for quantifier loop_parameter_specification => predicate | for quantifier iterator_specification => predicate Syntax quantifier ::= all | some predicate ::= boolean_expression Wherever the Syntax Rules allow an expression, a quantified_expression may be used in place of the expression, so long as it is immediately surrounded by parentheses. Name Resolution Rules 17/3 18/3 19/3 20/3 21/3 1/3 2/3 3/3 4/3 The expected quantified_expression is expected to be of the same type. type of a quantified_expression is any Boolean type. The predicate in a 5/3 123 13 December 2012 Conditional Expressions 4.5.7 Ada Reference Manual — 2012 Edition Dynamic Semantics 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 1/3 2 3 4/3 5/2 6 7 For the evaluation of a quantified_expression, the loop_parameter_specification or iterator_specification is first elaborated. The evaluation of a quantified_expression then evaluates the predicate for each value the of loop_parameter_specification (see 5.5) or iterator_specification (see 5.5.2). loop parameter. These values are examined specified by the order the in The value of the quantified_expression is determined as follows: • If the quantifier is all, the expression is True if the evaluation of the predicate yields True for each value of the loop parameter. It is False otherwise. Evaluation of the quantified_expression stops when all values of the domain have been examined, or when the predicate yields False for a given value. Any exception raised by evaluation of the predicate is propagated. • If the quantifier is some, the expression is True if the evaluation of the predicate yields True for some value of the loop parameter. It is False otherwise. Evaluation of the quantified_expression stops when all values of the domain have been examined, or when the predicate yields True for a given value. Any exception raised by evaluation of the predicate is propagated. Examples The postcondition for a sorting routine on an array A with an index subtype T can be written: Post => (A'Length < 2 or else (for all I in A'First .. T'Pred(A'Last) => A (I) <= A (T'Succ (I)))) The assertion that a positive number is composite (as opposed to prime) can be written: pragma Assert (for some X in 2 .. N / 2 => N mod X = 0); 4.6 Type Conversions Explicit type conversions, both value conversions and view conversions, are allowed between closely related types as defined below. This subclause also defines rules for value and view conversions to a particular subtype of a type, both explicit ones and those implicit in other constructs. type_conversion ::= subtype_mark(expression) | subtype_mark(name) Syntax The target subtype of a type_conversion is the subtype denoted by the subtype_mark. The operand of a type_conversion is the expression or name within the parentheses; its type is the operand type. One type is convertible to a second type if a type_conversion with the first type as operand type and the second type as target type is legal according to the rules of this subclause. Two types are convertible if each is convertible to the other. A type_conversion whose operand is the name of an object is called a view conversion if both its target type and operand type are tagged, or if it appears in a call as an actual parameter of mode out or in out; other type_conversions are called value conversions. The operand of a type_conversion is expected to be of any type. Name Resolution Rules The operand of a view conversion is interpreted only as a name; the operand of a value conversion is interpreted as an expression. 4.5.8 Quantified Expressions 13 December 2012 124 Ada Reference Manual — 2012 Edition In a view conversion for an untagged type, the target type shall be convertible (back) to the operand type. 8/2 Legality Rules Paragraphs 9 through 20 were reorganized and moved below. If there is a type (other than a root numeric type) that is an ancestor of both the target type and the operand type, or both types are class-wide types, then at least one of the following rules shall apply: 21/3 • The target type shall be untagged; or • The operand type shall be covered by or descended from the target type; or • The operand type shall be a class-wide type that covers the target type; or • The operand and target types shall both be class-wide types and the specific type associated with 21.1/2 22 23/2 23.1/2 at least one of them shall be an interface type. If there is no type (other than a root numeric type) that is the ancestor of both the target type and the operand type, and they are not both class-wide types, one of the following rules shall apply: 24/3 • If the target type is a numeric type, then the operand type shall be a numeric type. • If the target type is an array type, then the operand type shall be an array type. Further: • The types shall have the same dimensionality; • Corresponding index types shall be convertible; • The component subtypes shall statically match; • If the component types are anonymous access types, then the accessibility level of the operand type shall not be statically deeper than that of the target type; • Neither the target type nor the operand type shall be limited; • If the target type of a view conversion has aliased components, then so shall the operand type; and 24.1/2 24.2/2 24.3/2 24.4/2 24.5/2 24.6/2 24.7/2 24.8/2 • The operand type of a view conversion shall not have a tagged, private, or volatile 24.9/2 subcomponent. • If the target type is universal_access, then the operand type shall be an access type. • If the target type is a general access-to-object type, then the operand type shall be universal_- 24.10/2 24.11/2 access or an access-to-object type. Further, if the operand type is not universal_access: • If the target type is an access-to-variable type, then the operand type shall be an access-to- 24.12/2 variable type; • If the target designated type is tagged, then the operand designated type shall be convertible 24.13/2 to the target designated type; • If the target designated type is not tagged, then the designated types shall be the same, and 24.14/2 either: • • the designated subtypes shall statically match; or the designated type shall be discriminated in its full view and unconstrained in any partial view, and one of the designated subtypes shall be unconstrained; • The accessibility level of the operand type shall not be statically deeper than that of the target type, unless the target type is an anonymous access type of a stand-alone object. If the target type is that of such a stand-alone object, the accessibility level of the operand type shall not be statically deeper than that of the declaration of the stand-alone object. In 24.15/2 24.16/2 24.17/3 125 13 December 2012 Type Conversions 4.6 Ada Reference Manual — 2012 Edition addition to the places where Legality Rules normally apply (see 12.3), this rule applies also in the private part of an instance of a generic unit. 24.18/2 • If the target type is a pool-specific access-to-object type, then the operand type shall be universal_access. 24.19/2 24.20/3 24.21/2 25 26/3 • If the target type is an access-to-subprogram type, then the operand type shall be universal_- access or an access-to-subprogram type. Further, if the operand type is not universal_access: • The designated profiles shall be subtype conformant. • The accessibility level of the operand type shall not be statically deeper than that of the target type. In addition to the places where Legality Rules normally apply (see 12.3), this rule applies also in the private part of an instance of a generic unit. If the operand type is declared within a generic body, the target type shall be declared within the generic body. Static Semantics A type_conversion that is a value conversion denotes the value that is the result of converting the value of the operand to the target subtype. A type_conversion that is a view conversion denotes a view of the object denoted by the operand. This view is a variable of the target type if the operand denotes a variable; otherwise, it is a constant of the target type. 27 The nominal subtype of a type_conversion is its target subtype. 28 29 30 31 32 33 34 35 36 37 Dynamic Semantics For the evaluation of a type_conversion that is a value conversion, the operand is evaluated, and then the value of the operand is converted to a corresponding value of the target type, if any. If there is no value of the target type that corresponds to the operand value, Constraint_Error is raised; this can only happen on conversion to a modular type, and only when the operand value is outside the base range of the modular type. Additional rules follow: • Numeric Type Conversion • If the target and the operand types are both integer types, then the result is the value of the target type that corresponds to the same mathematical integer as the operand. • If the target type is a decimal fixed point type, then the result is truncated (toward 0) if the value of the operand is not a multiple of the small of the target type. • If the target type is some other real type, then the result is within the accuracy of the target type (see G.2, “Numeric Performance Requirements”, for implementations that support the Numerics Annex). • If the target type is an integer type and the operand type is real, the result is rounded to the nearest integer (away from zero if exactly halfway between two integers). • Enumeration Type Conversion • The result is the value of the target type with the same position number as that of the operand value. • Array Type Conversion • If the target subtype is a constrained array subtype, then a check is made that the length of each dimension of the value of the operand equals the length of the corresponding dimension of the target subtype. The bounds of the result are those of the target subtype. 4.6 Type Conversions 13 December 2012 126 Ada Reference Manual — 2012 Edition • If the target subtype is an unconstrained array subtype, then the bounds of the result are obtained by converting each bound of the value of the operand to the corresponding index type of the target type. For each nonnull index range, a check is made that the bounds of the range belong to the corresponding index subtype. 38 • In either array case, the value of each component of the result is that of the matching 39 component of the operand value (see 4.5.2). • If the component types of the array types are anonymous access types, then a check is made that the accessibility level of the operand type is not deeper than that of the target type. 39.1/2 • Composite (Non-Array) Type Conversion • The value of each nondiscriminant component of the result is that of the matching component of the operand value. • The tag of the result is that of the operand. If the operand type is class-wide, a check is made that the tag of the operand identifies a (specific) type that is covered by or descended from the target type. • For each discriminant of the target type that corresponds to a discriminant of the operand type, its value is that of the corresponding discriminant of the operand value; if it corresponds to more than one discriminant of the operand type, a check is made that all these discriminants are equal in the operand value. • For each discriminant of the target type that corresponds to a discriminant that is specified by the derived_type_definition for some ancestor of the operand type (or if class-wide, some ancestor of the specific type identified by the tag of the operand), its value in the result is that specified by the derived_type_definition. • For each discriminant of the operand type that corresponds to a discriminant that is specified by the derived_type_definition for some ancestor of the target type, a check is made that in the operand value it equals the value specified for it. • For each discriminant of the result, a check is made that its value belongs to its subtype. • Access Type Conversion • For an access-to-object type, a check is made that the accessibility level of the operand type is not deeper than that of the target type, unless the target type is an anonymous access type of a stand-alone object. If the target type is that of such a stand-alone object, a check is made that the accessibility level of the operand type is not deeper than that of the declaration of the stand-alone object; then if the check succeeds, the accessibility level of the target type becomes that of the operand type. • If the operand value is null, the result of the conversion is the null value of the target type. • If the operand value is not null, then the result designates the same object (or subprogram) as is designated by the operand value, but viewed as being of the target designated subtype (or profile); any checks associated with evaluating a conversion to the target designated subtype are performed. After conversion of the value to the target type, if the target subtype is constrained, a check is performed that the value satisfies this constraint. If the target subtype excludes null, then a check is made that the value is not null. If predicate checks are enabled for the target subtype (see 3.2.4), a check is performed that the predicate of the target subtype is satisfied for the value. 40 41 42 43 44 45 46 47 48/3 49/2 50 51/3 For the evaluation of a view conversion, the operand name is evaluated, and a new view of the object denoted by the operand is created, whose type is the target type; if the target type is composite, checks are performed as above for a value conversion. 52 127 13 December 2012 Type Conversions 4.6 Ada Reference Manual — 2012 Edition 53 The properties of this new view are as follows: 54/1 55 56 57/3 • If the target type is composite, the bounds or discriminants (if any) of the view are as defined above for a value conversion; each nondiscriminant component of the view denotes the matching component of the operand object; the subtype of the view is constrained if either the target subtype or the operand object is constrained, or if the target subtype is indefinite, or if the operand type is a descendant of the target type and has discriminants that were not inherited from the target type; • If the target type is tagged, then an assignment to the view assigns to the corresponding part of the object denoted by the operand; otherwise, an assignment to the view assigns to the object, after converting the assigned value to the subtype of the object (which might raise Constraint_Error); • Reading the value of the view yields the result of converting the value of the operand object to the target subtype (which might raise Constraint_Error), except if the object is of an access type and the view conversion is passed as an out parameter; in this latter case, the value of the operand object is used to initialize the formal parameter without checking against any constraint of the target subtype (see 6.4.1). an Accessibility_Check fails, If Assertions.Assertion_Error is raised. Any other check associated with a conversion raises Constraint_Error if it fails. fails, Program_Error a predicate raised. check is If 58 Conversion to a type is the same as conversion to an unconstrained subtype of the type. 59 60 61/2 62 63 64 65 66 67 68 NOTES 19 In addition to explicit type_conversions, type conversions are performed implicitly in situations where the expected type and the actual type of a construct differ, as is permitted by the type resolution rules (see 8.6). For example, an integer literal is of the type universal_integer, and is implicitly converted when assigned to a target of some specific integer type. Similarly, an actual parameter of a specific tagged type is implicitly converted when the corresponding formal parameter is of a class-wide type. Even when the expected and actual types are the same, implicit subtype conversions are performed to adjust the array bounds (if any) of an operand to match the desired target subtype, or to raise Constraint_Error if the (possibly adjusted) value does not satisfy the constraints of the target subtype. 20 A ramification of the overload resolution rules is that the operand of an (explicit) type_conversion cannot be an allocator, an aggregate, a string_literal, a character_literal, or an attribute_reference for an Access or Unchecked_Access attribute. Similarly, such an expression enclosed by parentheses is not allowed. A qualified_expression (see 4.7) can be used instead of such a type_conversion. 21 The constraint of the target subtype has no effect for a type_conversion of an elementary type passed as an out parameter. Hence, it is recommended that the first subtype be specified as the target to minimize confusion (a similar recommendation applies to renaming and generic formal in out objects). Examples of numeric type conversion: Real(2*J) -- value is converted to floating point Integer(1.6) -- value is 2 Integer(-0.4) -- value is 0 Examples Example of conversion between derived types: type A_Form is new B_Form; X : A_Form; Y : B_Form; X := A_Form(Y); Y := B_Form(X); -- the reverse conversion 4.6 Type Conversions 13 December 2012 128 Ada Reference Manual — 2012 Edition Examples of conversions between array types: type Sequence is array (Integer range <>) of Integer; subtype Dozen is Sequence(1 .. 12); Ledger : array(1 .. 100) of Integer; Sequence(Ledger) -- bounds are those of Ledger Sequence(Ledger(31 .. 42)) -- bounds are 31 and 42 Dozen(Ledger(31 .. 42)) -- bounds are those of Dozen 4.7 Qualified Expressions A qualified_expression is used to state explicitly the type, and to verify the subtype, of an operand that is either an expression or an aggregate. qualified_expression ::= subtype_mark'(expression) | subtype_mark'aggregate Syntax Name Resolution Rules The operand (the expression or aggregate) shall resolve to be of the type determined by the subtype_- mark, or a universal type that covers it. 69 70 71 1 2 3 If the operand of a qualified_expression denotes an object, the qualified_expression denotes a constant view of that object. The nominal subtype of a qualified_expression is the subtype denoted by the subtype_mark. 3.1/3 Static Semantics Dynamic Semantics The evaluation of a qualified_expression evaluates the operand (and if of a universal type, converts it to the type determined by the subtype_mark) and checks that its value belongs to the subtype denoted by the subtype_mark. The exception Constraint_Error is raised if this check fails. NOTES 22 When a given context does not uniquely identify an expected type, a qualified_expression can be used to do so. In particular, if an overloaded name or aggregate is passed to an overloaded subprogram, it might be necessary to qualify the operand to resolve its type. Examples Examples of disambiguating expressions using qualification: type Mask is (Fix, Dec, Exp, Signif); type Code is (Fix, Cla, Dec, Tnz, Sub); Print (Mask'(Dec)); -- Dec is of type Mask Print (Code'(Dec)); -- Dec is of type Code for J in Code'(Fix) .. Code'(Dec) loop ... -- qualification needed for either Fix or Dec for J in Code range Fix .. Dec loop ... -- qualification unnecessary for J in Code'(Fix) .. Dec loop ... -- qualification unnecessary for Dec Dozen'(1 | 3 | 5 | 7 => 2, others => 0) -- see 4.6 4 5 6 7 8 9 10 4.8 Allocators The evaluation of an allocator creates an object and yields an access value that designates the object. 1 129 13 December 2012 Type Conversions 4.6 2/3 2.1/3 2.2/3 3/3 Ada Reference Manual — 2012 Edition Syntax allocator ::= new [subpool_specification] subtype_indication | new [subpool_specification] qualified_expression subpool_specification ::= (subpool_handle_name) For an allocator with a subtype_indication, the subtype_indication shall not specify a null_exclusion. Name Resolution Rules The expected type for an allocator shall be a single access-to-object type with designated type D such that either D covers the type determined by the subtype_mark of the subtype_indication or qualified_- expression, or is D'Class. A is anonymous and subpool_handle_name is expected to be of any type descended from Subpool_Handle, which is the type used to identify a subpool, declared in package System.Storage_Pools.Subpools (see 13.11.4). the determined the expected type type Legality Rules 4 An initialized allocator is an allocator with a qualified_expression. An uninitialized allocator is one with a subtype_indication. In the subtype_indication of an uninitialized allocator, a constraint is permitted only if the subtype_mark denotes an unconstrained composite subtype; if there is no constraint, then the subtype_mark shall denote a definite subtype. 5/2 If the type of the allocator is an access-to-constant type, the allocator shall be an initialized allocator. 5.1/3 5.2/3 5.3/3 5.4/3 5.5/3 5.6/3 6/3 If a subpool_specification is given, the type of the storage pool of the access type shall be a descendant of Root_Storage_Pool_With_Subpools. If the designated type of the type of the allocator is class-wide, the accessibility level of the type determined by the subtype_indication or qualified_expression shall not be statically deeper than that of the type of the allocator. If the subtype determined by the subtype_indication or qualified_expression of the allocator has one or more access discriminants, then the accessibility level of the anonymous access type of each access discriminant shall not be statically deeper than that of the type of the allocator (see 3.10.2). An allocator shall not be of an access type for which the Storage_Size has been specified by a static expression with value zero or is defined by the language to be zero. If the designated type of the type of the allocator is limited, then the allocator shall not be used to define the value of an access discriminant, unless the discriminated type is immutably limited (see 7.5). In addition to the places where Legality Rules normally apply (see 12.3), these rules apply also in the private part of an instance of a generic unit. Static Semantics If the designated type of the type of the allocator is elementary, then the subtype of the created object is the designated subtype. If the designated type is composite, then the subtype of the created object is the designated subtype when the designated subtype is constrained or there is an ancestor of the designated type that has a constrained partial view; otherwise, the created object is constrained by its initial value (even if the designated subtype is unconstrained with defaults). 4.8 Allocators 13 December 2012 130 Ada Reference Manual — 2012 Edition Dynamic Semantics For the evaluation of an initialized allocator, the evaluation of the qualified_expression is performed first. An object of the designated type is created and the value of the qualified_expression is converted to the designated subtype and assigned to the object. For the evaluation of an uninitialized allocator, the elaboration of the subtype_indication is performed first. Then: • If the designated type is elementary, an object of the designated subtype is created and any implicit initial value is assigned; • If the designated type is composite, an object of the designated type is created with tag, if any, determined by the subtype_mark of the subtype_indication. This object is then initialized by default (see 3.3.1) using the subtype_indication to determine its nominal subtype. A check is made that the value of the object belongs to the designated subtype. Constraint_Error is raised if this check fails. This check and the initialization of the object are performed in an arbitrary order. For any allocator, if the designated type of the type of the allocator is class-wide, then a check is made that the master of the type determined by the subtype_indication, or by the tag of the value of the qualified_expression, includes the elaboration of the type of the allocator. If any part of the subtype determined by the subtype_indication or qualified_expression of the allocator (or by the tag of the value if the type of the qualified_expression is class-wide) has one or more access discriminants, then a check is made that the accessibility level of the anonymous access type of each access discriminant is not deeper than that of the type of the allocator. Program_Error is raised if either such check fails. 7/2 8 9/2 10/2 10.1/3 If the object to be created by an allocator has a controlled or protected part, and the finalization of the collection of the type of the allocator (see 7.6.1) has started, Program_Error is raised. 10.2/2 If the object to be created by an allocator contains any tasks, and the master of the type of the allocator is completed, and all of the dependent tasks of the master are terminated (see 9.3), then Program_Error is raised. If the allocator includes a subpool_handle_name, Constraint_Error is raised if the subpool handle is null. Program_Error is raised if the subpool does not belong (see 13.11.4) to the storage pool of the access type of the allocator. 10.3/2 10.4/3 If the created object contains any tasks, they are activated (see 9.2). Finally, an access value that designates the created object is returned. 11 It is a bounded error if the finalization of the collection of the type (see 7.6.1) of the allocator has started. If the error is detected, Program_Error is raised. Otherwise, the allocation proceeds normally. 11.1/2 Bounded (Run-Time) Errors NOTES 23 Allocators cannot create objects of an abstract type. See 3.9.3. 24 If any part of the created object is controlled, the initialization includes calls on corresponding Initialize or Adjust procedures. See 7.6. 25 As explained in 13.11, “Storage Management”, the storage for an object allocated by an allocator comes from a storage pool (possibly user defined). The exception Storage_Error is raised by an allocator if there is not enough storage. Instances of Unchecked_Deallocation may be used to explicitly reclaim storage. 26 Implementations are permitted, but not required, to provide garbage collection. 12 13 14 15/3 131 13 December 2012 Allocators 4.8 Ada Reference Manual — 2012 Edition Examples of allocators: Examples new Cell'(0, null, null) -- initialized explicitly, see 3.10.1 new Cell'(Value => 0, Succ => null, Pred => null) -- initialized explicitly new Cell -- not initialized new Matrix(1 .. 10, 1 .. 20) -- the bounds only are given new Matrix'(1 .. 10 => (1 .. 20 => 0.0)) -- initialized explicitly new Buffer(100) -- the discriminant only is given new Buffer'(Size => 80, Pos => 0, Value => (1 .. 80 => 'A')) -- initialized explicitly Expr_Ptr'(new Literal) -- allocator for access-to-class-wide type, see 3.9.1 Expr_Ptr'(new Literal'(Expression with 3.5)) -- initialized explicitly 4.9 Static Expressions and Static Subtypes Certain expressions of a scalar or string type are defined to be static. Similarly, certain discrete ranges are defined to be static, and certain scalar and string subtypes are defined to be static subtypes. Static means determinable at compile time, using the declared properties or values of the program entities. A static expression is a scalar or string expression that is one of the following: • a numeric_literal; • a string_literal of a static string subtype; • a name that denotes the declaration of a named number or a static constant; • a function_call whose function_name or function_prefix statically denotes a static function, and whose actual parameters, if any (whether given explicitly or by default), are all static expressions; • an attribute_reference that denotes a scalar value, and whose prefix denotes a static scalar subtype; • an attribute_reference whose prefix statically denotes a statically constrained array object or array subtype, and whose attribute_designator is First, Last, or Length, with an optional dimension; • a type_conversion whose subtype_mark denotes a static scalar subtype, and whose operand is a static expression; 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 • a qualified_expression whose subtype_mark denotes a static (scalar or string) subtype, and whose operand is a static expression; 11/3 12 12.1/3 13 14 15 • a membership is a static expression, and whose test whose simple_expression membership_choice_list consists only of membership_choices that are either static choice_expressions, static ranges, or subtype_marks that denote a static (scalar or string) subtype; • a short-circuit control form both of whose relations are static expressions; • a conditional_expression of whose conditions, all selecting_expressions, and dependent_expressions are static expressions; • a static expression enclosed in parentheses. A name statically denotes an entity if it denotes the entity and: • It is a direct_name, expanded name, or character_literal, and it denotes a declaration other than a renaming_declaration; or 4.8 Allocators 13 December 2012 132 Ada Reference Manual — 2012 Edition • It is an attribute_reference whose prefix statically denotes some entity; or • It denotes a renaming_declaration with a name that statically denotes the renamed entity. A static function is one of the following: • a predefined operator whose parameter and result types are all scalar types none of which are descendants of formal scalar types; • a predefined concatenation operator whose result type is a string type; • an enumeration literal; • a language-defined attribute that is a function, if the prefix denotes a static scalar subtype, and if the parameter and result types are scalar. In any case, a generic formal subprogram is not a static function. A static constant is a constant view declared by a full constant declaration or an object_renaming_- declaration with a static nominal subtype, having a value defined by a static scalar expression or by a static string expression whose value has a length not exceeding the maximum length of a string_literal in the implementation. A static range is a range whose bounds are static expressions, or a range_attribute_reference that is equivalent to such a range. A static discrete_range is one that is a static range or is a subtype_indication that defines a static scalar subtype. The base range of a scalar type is a static range, unless the type is a descendant of a formal scalar type. A static subtype is either a static scalar subtype or a static string subtype. A static scalar subtype is an unconstrained scalar subtype whose type is not a descendant of a formal type, or a constrained scalar subtype formed by imposing a compatible static constraint on a static scalar subtype. A static string subtype is an unconstrained string subtype whose index subtype and component subtype are static, or a constrained string subtype formed by imposing a compatible static constraint on a static string subtype. In any case, the subtype of a generic formal object of mode in out, and the result subtype of a generic formal function, are not static. Also, a subtype is not static if any Dynamic_Predicate specifications apply to it. The different kinds of static constraint are defined as follows: • A null constraint is always static; • A scalar constraint is static if it has no range_constraint, or one with a static range; • An index constraint is static if each discrete_range is static, and each index subtype of the corresponding array type is static; • A discriminant constraint is static if each expression of the constraint is static, and the subtype of each discriminant is static. In any case, the constraint of the first subtype of a scalar formal type is neither static nor null. A subtype is statically constrained if it is constrained, and its constraint is static. An object is statically constrained if its nominal subtype is statically constrained, or if it is a static string constant. An expression is statically unevaluated if it is part of: Legality Rules • the right operand of a static short-circuit control form whose value is determined by its left operand; or 16 17 18 19 20 21 22 23 24 25 26/3 27 28 29 30 31 31.1/2 32 32.1/3 32.2/3 133 13 December 2012 Static Expressions and Static Subtypes 4.9 Ada Reference Manual — 2012 Edition 32.3/3 • a dependent_expression of an if_expression whose associated condition is static and equals False; or 32.4/3 32.5/3 32.6/3 • a condition or dependent_expression of an if_expression where the condition corresponding to at least one preceding dependent_expression of the if_expression is static and equals True; or • a dependent_expression of a case_expression whose selecting_expression is static and whose value is not covered by the corresponding discrete_choice_list; or • a choice_expression (or a simple_expression of a range that occurs as a membership_choice of a membership_choice_list) of a static membership test that is preceded in the enclosing membership_choice_list by another item whose individual membership test (see 4.5.2) statically yields True. 33/3 A static expression is evaluated at compile time except when it is statically unevaluated. The compile-time evaluation of a static expression is performed exactly, without performing Overflow_Checks. For a static expression that is evaluated: 34/3 • The expression is illegal if its evaluation fails a language-defined check other than Overflow_- Check. For the purposes of this evaluation, the assertion policy is assumed to be Check. 35/2 36/2 • If the expression is not part of a larger static expression and the expression is expected to be of a single specific type, then its value shall be within the base range of its expected type. Otherwise, the value may be arbitrarily large or small. • If the expression is of type universal_real and its expected type is a decimal fixed point type, then its value shall be a multiple of the small of the decimal type. This restriction does not apply if the expected type is a descendant of a formal scalar type (or a corresponding actual type in an instance). 37/2 In addition to the places where Legality Rules normally apply (see 12.3), the above restrictions also apply in the private part of an instance of a generic unit. Implementation Requirements 38/2 For a real static expression that is not part of a larger static expression, and whose expected type is not a descendant of a formal type, the implementation shall round or truncate the value (according to the Machine_Rounds attribute of the expected type) to the nearest machine number of the expected type; if the value is exactly half-way between two machine numbers, the rounding performed is implementation- defined. If the expected type is a descendant of a formal type, or if the static expression appears in the body of an instance of a generic unit and the corresponding expression is nonstatic in the corresponding generic body, then no special rounding or truncating is required — normal accuracy rules apply (see Annex G). 38.1/2 For a real static expression that is not part of a larger static expression, and whose expected type is not a descendant of a formal type, the rounding should be the same as the default rounding for the target system. Implementation Advice 39 40 41 42 NOTES 27 An expression can be static even if it occurs in a context where staticness is not required. 28 A static (or run-time) type_conversion from a real type to an integer type performs rounding. If the operand value is exactly half-way between two integers, the rounding is performed away from zero. Examples of static expressions: 1 + 1 -- 2 abs(-10)*3 -- 30 Examples 4.9 Static Expressions and Static Subtypes 13 December 2012 134 Ada Reference Manual — 2012 Edition Kilo : constant := 1000; Mega : constant := Kilo*Kilo; -- 1_000_000 Long : constant := Float'Digits*2; Half_Pi : constant := Pi/2; -- see 3.3.2 Deg_To_Rad : constant := Half_Pi/90; Rad_To_Deg : constant := 1.0/Deg_To_Rad; -- equivalent to 1.0/((3.14159_26536/2)/90) 43 44 135 13 December 2012 Static Expressions and Static Subtypes 4.9 Ada Reference Manual — 2012 Edition 4.9.1 Statically Matching Constraints and Subtypes 1/2 A constraint statically matches another constraint if: Static Semantics 1.1/2 1.2/2 1.3/2 1.4/2 2/3 3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 • both are null constraints; • both are static and have equal corresponding bounds or discriminant values; • both are nonstatic and result from the same elaboration of a constraint of a subtype_indication or the same evaluation of a range of a discrete_subtype_definition; or • both are nonstatic and come from the same formal_type_declaration. A subtype statically matches another subtype of the same type if they have statically matching constraints, all predicate specifications that apply to them come from the same declarations, and, for access subtypes, either both or neither exclude null. Two anonymous access-to-object subtypes statically match if their designated subtypes statically match, and either both or neither exclude null, and either both or neither are access-to-constant. Two anonymous access-to-subprogram subtypes statically match if their designated profiles are subtype conformant, and either both or neither exclude null. Two ranges of the same type statically match if both result from the same evaluation of a range, or if both are static and have equal corresponding bounds. A constraint is statically compatible with a scalar subtype if it statically matches the constraint of the subtype, or if both are static and the constraint is compatible with the subtype. A constraint is statically compatible with an access or composite subtype if it statically matches the constraint of the subtype, or if the subtype is unconstrained. Two statically matching subtypes are statically compatible with each other. In addition, a subtype S1 is statically compatible with a subtype S2 if: the constraint of S1 is statically compatible with S2, and if S2 excludes null, so does S1, and • • • either: • all predicate specifications that apply to S2 apply also to S1, or • both subtypes are static, every value that satisfies the predicate of S1 also satisfies the predicate of S2, and it is not the case that both types each have at least one applicable predicate specification, predicate checks are enabled (see 11.4.2) for S2, and predicate checks are not enabled for S1. 4.9.1 Statically Matching Constraints and Subtypes 13 December 2012 136 Ada Reference Manual — 2012 Edition 5 Statements A statement defines an action to be performed upon its execution. This clause describes the general rules applicable to all statements. Some statements are discussed in later clauses: Procedure_call_statements and return statements are described in 6, “Subprograms”. Entry_call_statements, requeue_statements, delay_statements, accept_statements, select_statements, and abort_statements are described in 9, “Tasks and Synchronization”. Raise_statements are described in 11, “Exceptions”, and code_statements in 13. The remaining forms of statements are presented in this clause. 1 2/3 5.1 Simple and Compound Statements - Sequences of Statements A statement is either simple or compound. A simple_statement encloses no other statement. A compound_statement can enclose simple_statements and other compound_statements. 1 sequence_of_statements ::= statement {statement} {label} statement ::= {label} simple_statement | {label} compound_statement Syntax simple_statement ::= null_statement | assignment_statement | goto_statement | simple_return_statement | requeue_statement | abort_statement | code_statement compound_statement ::= if_statement | loop_statement | extended_return_statement | accept_statement null_statement ::= null; | exit_statement | procedure_call_statement | entry_call_statement | delay_statement | raise_statement | case_statement | block_statement | select_statement label ::= <> statement_identifier ::= direct_name The direct_name of a statement_identifier shall be an identifier (not an operator_symbol). The direct_name of a statement_identifier shall resolve to denote its corresponding implicit declaration (see below). Name Resolution Rules Distinct identifiers shall be used for all statement_identifiers that appear in the same body, including inner block_statements but excluding inner program units. Legality Rules 137 13 December 2012 Statements 5 2/3 3 4/2 5/2 6 7 8 9 10 11 Ada Reference Manual — 2012 Edition Static Semantics 12 For each statement_identifier, there is an implicit declaration (with the specified identifier) at the end of the declarative_part of the innermost block_statement or body that encloses the statement_identifier. The implicit declarations occur in the same order as the statement_identifiers occur in the source text. If a usage name denotes such an implicit declaration, the entity it denotes is the label, loop_statement, or block_statement with the given statement_identifier. 12.1/3 If one or more labels end a sequence_of_statements, an implicit null_statement follows the labels before any following constructs. 13 The execution of a null_statement has no effect. Dynamic Semantics 14/2 A transfer of control is the run-time action of an exit_statement, return statement, goto_statement, or requeue_statement, selection of a terminate_alternative, raising of an exception, or an abort, which causes the next action performed to be one other than what would normally be expected from the other rules of the language. As explained in 7.6.1, a transfer of control can cause the execution of constructs to be completed and then left, which may trigger finalization. 15 16 17 18 19 1 2 3 The execution of a sequence_of_statements consists of the execution of the individual statements in succession until the sequence_ is completed. NOTES 1 A statement_identifier that appears immediately within the declarative region of a named loop_statement or an accept_statement is nevertheless implicitly declared immediately within the declarative region of the innermost enclosing body or block_statement; in other words, the expanded name for a named statement is not affected by whether the statement occurs inside or outside a named loop or an accept_statement — only nesting within block_statements is relevant to the form of its expanded name. Examples of labeled statements: <> <> <> <> null; <> X := 1; Examples 5.2 Assignment Statements An assignment_statement replaces the current value of a variable with the result of evaluating an expression. assignment_statement ::= variable_name := expression; Syntax The execution of an assignment_statement includes the evaluation of the expression and the assignment of the value of the expression into the target. An assignment operation (as opposed to an assignment_- statement) is performed in other contexts as well, including object initialization and by-copy parameter passing. The target of an assignment operation is the view of the object to which a value is being assigned; the target of an assignment_statement is the variable denoted by the variable_name. 4/2 The variable_name of an assignment_statement is expected to be of any type. The expected type for the expression is the type of the target. Name Resolution Rules 5.1 Simple and Compound Statements - Sequences of Statements 13 December 2012 138 Ada Reference Manual — 2012 Edition The target denoted by the variable_name shall be a variable of a nonlimited type. Legality Rules If the target is of a tagged class-wide type T'Class, then the expression shall either be dynamically tagged, or of type T and tag-indeterminate (see 3.9.2). Dynamic Semantics For the execution of an assignment_statement, the variable_name and the expression are first evaluated in an arbitrary order. When the type of the target is class-wide: • If the expression is tag-indeterminate (see 3.9.2), then the controlling tag value for the expression is the tag of the target; • Otherwise (the expression is dynamically tagged), a check is made that the tag of the value of the expression is the same as that of the target; if this check fails, Constraint_Error is raised. The value of the expression is converted to the subtype of the target. The conversion might raise an exception (see 4.6). In cases involving controlled types, the target is finalized, and an anonymous object might be used as an intermediate in the assignment, as described in 7.6.1, “Completion and Finalization”. In any case, the converted value of the expression is then assigned to the target, which consists of the following two steps: • The value of the target becomes the converted value. • If any part of the target is controlled, its value is adjusted as explained in subclause 7.6. NOTES 2 The tag of an object never changes; in particular, an assignment_statement does not change the tag of the target. This paragraph was deleted. Examples Examples of assignment statements: Value := Max_Value - 1; Shade := Blue; Next_Frame(F)(M, N) := 2.5; -- see 4.1.1 U := Dot_Product(V, W); -- see 6.3 Writer := (Status => Open, Unit => Printer, Line_Count => 60); -- see 3.8.1 Next_Car.all := (72074, null); -- see 3.10.1 Examples involving scalar subtype conversions: I, J : Integer range 1 .. 10 := 5; K : Integer range 1 .. 20 := 15; ... I := J; -- identical ranges K := J; -- compatible ranges J := K; -- will raise Constraint_Error if K > 10 5/2 6 7 8 9 10 11 12 13 14/3 15 16/2 17 18 19 20 21 22 23 139 13 December 2012 Assignment Statements 5.2 24 25 26 27 28 1 2 Ada Reference Manual — 2012 Edition Examples involving array subtype conversions: A : String(1 .. 31); B : String(3 .. 33); ... A := B; -- same number of components A(1 .. 9) := "tar sauce"; A(4 .. 12) := A(1 .. 9); -- A(1 .. 12) = "tartar sauce" NOTES 3 Notes on the examples: Assignment_statements are allowed even in the case of overlapping slices of the same array, because the variable_name and expression are both evaluated before copying the value into the variable. In the above example, an implementation yielding A(1 .. 12) = "tartartartar" would be incorrect. 5.3 If Statements An if_statement selects for execution at most one of the enclosed sequences_of_statements, depending on the (truth) value of one or more corresponding conditions. Syntax if_statement ::= if condition then sequence_of_statements {elsif condition then sequence_of_statements} [else sequence_of_statements] end if; Paragraphs 3 and 4 were deleted. 5/3 For the execution of an if_statement, the condition specified after if, and any conditions specified after elsif, are evaluated in succession (treating a final else as elsif True then), until one evaluates to True or all conditions are evaluated and yield False. If a condition evaluates to True, then the corresponding sequence_of_statements is executed; otherwise, none of them is executed. Dynamic Semantics 6 7 8 9 Examples of if statements: Examples if Month = December and Day = 31 then Month := January; Day := 1; Year := Year + 1; end if; if Line_Too_Short then raise Layout_Error; elsif Line_Full then New_Line; Put(Item); else Put(Item); end if; if My_Car.Owner.Vehicle /= My_Car then -- see 3.10.1 Report ("Incorrect data"); end if; 5.2 Assignment Statements 13 December 2012 140 Ada Reference Manual — 2012 Edition 5.4 Case Statements A case_statement selects for execution one of a number of alternative sequences_of_statements; the chosen alternative is defined by the value of an expression. 1 Syntax case_statement ::= case selecting_expression is case_statement_alternative {case_statement_alternative} end case; case_statement_alternative ::= when discrete_choice_list => sequence_of_statements 2/3 3 The selecting_expression is expected to be of any discrete type. The expected type for each discrete_choice is the type of the selecting_expression. 4/3 Name Resolution Rules ranges given as discrete_choices of a The choice_expressions, subtype_indications, and case_statement shall be static. A discrete_choice others, if present, shall appear alone and in the last discrete_choice_list. Legality Rules The possible values of the selecting_expression shall be covered (see 3.8.1) as follows: • If the selecting_expression is a name (including a type_conversion, qualified_expression, or function_call) having a static and constrained nominal subtype, then each non-others discrete_choice shall cover only values in that subtype that satisfy its predicate (see 3.2.4), and each value of that subtype that satisfies its predicate shall be covered by some discrete_choice (either explicitly or by others). • If the type of the selecting_expression is root_integer, universal_integer, or a descendant of a formal scalar type, then the case_statement shall have an others discrete_choice. • Otherwise, each value of the base range of the type of the selecting_expression shall be covered (either explicitly or by others). Two distinct discrete_choices of a case_statement shall not cover the same value. For the execution of a case_statement the selecting_expression is first evaluated. Dynamic Semantics If the value of the selecting_expression is covered by the discrete_choice_list of some case_statement_- alternative, then the sequence_of_statements of the _alternative is executed. Otherwise (the value is not covered by any discrete_choice_list, perhaps due to being outside the base range), Constraint_Error is raised. NOTES 4 The execution of a case_statement chooses one and only one alternative. Qualification of the expression of a case_statement by a static subtype can often be used to limit the number of choices that need be given explicitly. 5/3 6/3 7/3 8/3 9/3 10 11/3 12/3 13 14 141 13 December 2012 Case Statements 5.4 15 16 17 18 1 2 3/3 4 5 6 7 Ada Reference Manual — 2012 Edition Examples => null; Examples of case statements: case Sensor is when Elevation => Record_Elevation(Sensor_Value); when Azimuth => Record_Azimuth (Sensor_Value); when Distance => Record_Distance (Sensor_Value); when others end case; case Today is when Mon when Fri when Tue .. Thu => Generate_Report(Today); when Sat .. Sun => null; end case; case Bin_Number(Count) is when 1 when 2 when 3 | 4 => Empty_Bin(1); Empty_Bin(2); when others end case; => Compute_Initial_Balance; => Compute_Closing_Balance; => Update_Bin(1); => Update_Bin(2); => raise Error; 5.5 Loop Statements A loop_statement includes a sequence_of_statements that is to be executed repeatedly, zero or more times. Syntax loop_statement ::= [loop_statement_identifier:] [iteration_scheme] loop sequence_of_statements end loop [loop_identifier]; iteration_scheme ::= while condition | for loop_parameter_specification | for iterator_specification loop_parameter_specification ::= defining_identifier in [reverse] discrete_subtype_definition If a loop_statement has a loop_statement_identifier, then the identifier shall be repeated after the end loop; otherwise, there shall not be an identifier after the end loop. A loop_parameter_specification declares a loop parameter, which is an object whose subtype is that defined by the discrete_subtype_definition. Static Semantics For the execution of a loop_statement, the sequence_of_statements is executed repeatedly, zero or more times, until the loop_statement is complete. The loop_statement is complete when a transfer of control occurs that transfers control out of the loop, or, in the case of an iteration_scheme, as specified below. Dynamic Semantics 5.4 Case Statements 13 December 2012 142 Ada Reference Manual — 2012 Edition For the execution of a loop_statement with a while iteration_scheme, the condition is evaluated before each execution of the sequence_of_statements; if the value of the condition is True, the sequence_of_- statements is executed; if False, the execution of the loop_statement is complete. For the execution of a loop_statement with the iteration_scheme being for loop_parameter_- specification, the loop_parameter_specification is first elaborated. This elaboration creates the loop parameter and elaborates the discrete_subtype_definition. If the discrete_subtype_definition defines a subtype with a null range, the execution of the loop_statement is complete. Otherwise, the sequence_of_statements is executed once for each value of the discrete subtype defined by the discrete_subtype_definition that satisfies the predicate of the subtype (or until the loop is left as a consequence of a transfer of control). Prior to each such iteration, the corresponding value of the discrete subtype is assigned to the loop parameter. These values are assigned in increasing order unless the reserved word reverse is present, in which case the values are assigned in decreasing order. 8 9/3 For details about iterator_specification, see 5.5.2. the execution of a loop_statement with the iteration_scheme being for 9.1/3 NOTES 5 A loop parameter is a constant; it cannot be updated within the sequence_of_statements of the loop (see 3.3). 6 An object_declaration should not be given for a loop parameter, since the loop parameter is automatically declared by the loop_parameter_specification. The scope of a loop parameter extends from the loop_parameter_specification to the end of the loop_statement, and the visibility rules are such that a loop parameter is only visible within the sequence_of_statements of the loop. 7 The discrete_subtype_definition of a for loop is elaborated just once. Use of the reserved word reverse does not alter the discrete subtype defined, so that the following iteration_schemes are not equivalent; the first has a null range. for J in reverse 1 .. 0 for J in 0 .. 1 Examples Example of a loop statement without an iteration scheme: loop Get(Current_Character); exit when Current_Character = '*'; end loop; Example of a loop statement with a while iteration scheme: while Bid(N).Price < Cut_Off.Price loop Record_Bid(Bid(N).Price); N := N + 1; end loop; Example of a loop statement with a for iteration scheme: for J in Buffer'Range loop -- works even with a null range if Buffer(J) /= Space then Put(Buffer(J)); end if; end loop; Example of a loop statement with a name: Summation: while Next /= Head loop -- see 3.10.1 Sum := Sum + Next.Value; Next := Next.Succ; end loop Summation; 10 11 12 13 14 15 16 17 18 19 20 21 143 13 December 2012 Loop Statements 5.5 Ada Reference Manual — 2012 Edition 5.5.1 User-Defined Iterator Types The following language-defined generic library package exists: Static Semantics generic type Cursor; with function Has_Element (Position : Cursor) return Boolean; package Ada.Iterator_Interfaces is pragma Pure (Iterator_Interfaces); type Forward_Iterator is limited interface; function First (Object : Forward_Iterator) return Cursor is abstract; function Next (Object : Forward_Iterator; Position : Cursor) return Cursor is abstract; type Reversible_Iterator is limited interface and Forward_Iterator; function Last (Object : Reversible_Iterator) return Cursor is abstract; function Previous (Object : Reversible_Iterator; Position : Cursor) return Cursor is abstract; end Ada.Iterator_Interfaces; An iterator type is a type descended from the Forward_Iterator interface from some instance of Ada.Iterator_Interfaces. A reversible iterator type is a type descended from the Reversible_Iterator interface from some instance of Ada.Iterator_Interfaces. An iterator object is an object of an iterator type. A reversible iterator object is an object of a reversible iterator type. The formal subtype Cursor from the associated instance of Ada.Iterator_Interfaces is the iteration cursor subtype for the iterator type. 1/3 2/3 3/3 4/3 5/3 6/3 7/3 The following type-related operational aspects may be specified for an indexable container type T (see 4.1.6): 8/3 Default_Iterator This aspect is specified by a name that denotes exactly one function declared immediately within the same declaration list in which T is declared, whose first parameter is of type T or T'Class or an access parameter whose designated type is type T or T'Class, whose other parameters, if any, have default expressions, and whose result type is an iterator type. This function is the default iterator function for T. Its result subtype is the default iterator subtype for T. The iteration cursor subtype for the default iterator subtype is the default cursor subtype for T. 9/3 Iterator_Element This aspect is specified by a name that denotes a subtype. This is the default element subtype for T. 10/3 These aspects are inherited by descendants of type T (including T'Class). 11/3 An iterable container type is an indexable container type with specified Default_Iterator and Iterator_Element aspects. A reversible iterable container type is an iterable container type with the default iterator type being a reversible iterator type. An iterable container object is an object of an iterable container type. A reversible iterable container object is an object of a reversible iterable container type. Legality Rules 12/3 The Constant_Indexing aspect (if any) of an iterable container type T shall denote exactly one function with the following properties: 13/3 • the result type of the function is covered by the default element type of T or is a reference type (see 4.1.5) with an access discriminant designating a type covered by the default element type of T; 5.5.1 User-Defined Iterator Types 13 December 2012 144 Ada Reference Manual — 2012 Edition • • the type of the second parameter of the function covers the default cursor type for T; if there are more than two parameters, the additional parameters all have default expressions. This function (if any) is the default constant indexing function for T. The Variable_Indexing aspect (if any) of an iterable container type T shall denote exactly one function with the following properties: • • • the result type of the function is a reference type (see 4.1.5) with an access discriminant designating a type covered by the default element type of T; the type of the second parameter of the function covers the default cursor type for T; if there are more than two parameters, the additional parameters all have default expressions. This function (if any) is the default variable indexing function for T. 5.5.2 Generalized Loop Iteration Generalized forms of loop iteration are provided by an iterator_specification. iterator_specification ::= defining_identifier in [reverse] iterator_name | defining_identifier [: subtype_indication] of [reverse] iterable_name Syntax Name Resolution Rules For the first form of iterator_specification, called a generalized iterator, the expected type for the iterator_name is any iterator type. For the second form of iterator_specification, the expected type for the iterable_name is any array or iterable container type. If the iterable_name denotes an array object, the iterator_specification is called an array component iterator; otherwise it is called a container element iterator. Legality Rules If the reserved word reverse appears, the iterator_specification is a reverse iterator; otherwise it is a forward iterator. In a reverse generalized iterator, the iterator_name shall be of a reversible iterator type. In a reverse container element iterator, the default iterator type for the type of the iterable_name shall be a reversible iterator type. The type of the subtype_indication, if any, of an array component iterator shall cover the component type of the type of the iterable_name. The type of the subtype_indication, if any, of a container element iterator shall cover the default element type for the type of the iterable_name. In a container element iterator whose iterable_name has type T, if the iterable_name denotes a constant or the Variable_Indexing aspect is not specified for T, then the Constant_Indexing aspect shall be specified for T. Static Semantics An iterator_specification declares a loop parameter. In a generalized iterator, the nominal subtype of the loop parameter is the iteration cursor subtype. In an array component iterator or a container element iterator, if a subtype_indication is present, it determines the nominal subtype of the loop parameter. In an array component iterator, if a subtype_indication is not present, the nominal subtype of the loop parameter is the component subtype of the type of the iterable_name. In a container element iterator, if a 145 13 December 2012 User-Defined Iterator Types 5.5.1 14/3 15/3 16/3 17/3 18/3 19/3 20/3 21/3 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 Ada Reference Manual — 2012 Edition subtype_indication is not present, the nominal subtype of the loop parameter is the default element subtype for the type of the iterable_name. In a generalized iterator, the loop parameter is a constant. In an array component iterator, the loop parameter is a constant if the iterable_name denotes a constant; otherwise it denotes a variable. In a container element iterator, the loop parameter is a constant if the iterable_name denotes a constant, or if the Variable_Indexing aspect is not specified for the type of the iterable_name; otherwise it is a variable. Dynamic Semantics For the execution of a loop_statement with an iterator_specification, the iterator_specification is first elaborated. This elaboration elaborates the subtype_indication, if any. For a generalized iterator, the loop parameter is created, the iterator_name is evaluated, and the denoted iterator object becomes the loop iterator. In a forward generalized iterator, the operation First of the iterator type is called on the loop iterator, to produce the initial value for the loop parameter. If the result of calling Has_Element on the initial value is False, then the execution of the loop_statement is complete. Otherwise, the sequence_of_statements is executed and then the Next operation of the iterator type is called with the loop iterator and the current value of the loop parameter to produce the next value to be assigned to the loop parameter. This repeats until the result of calling Has_Element on the loop parameter is False, or the loop is left as a consequence of a transfer of control. For a reverse generalized iterator, the operations Last and Previous are called rather than First and Next. For an array component iterator, the iterable_name is evaluated and the denoted array object becomes the array for the loop. If the array for the loop is a null array, then the execution of the loop_statement is complete. Otherwise, the sequence_of_statements is executed with the loop parameter denoting each component of the array for the loop, using a canonical order of components, which is last dimension varying fastest (unless the array has convention Fortran, in which case it is first dimension varying fastest). For a forward array component iterator, the iteration starts with the component whose index values are each the first in their index range, and continues in the canonical order. For a reverse array component iterator, the iteration starts with the component whose index values are each the last in their index range, and continues the reverse of the canonical order. The loop iteration proceeds until the sequence_of_statements has been executed for each component of the array for the loop, or until the loop is left as a consequence of a transfer of control. in For a container element iterator, the iterable_name is evaluated and the denoted iterable container object becomes the iterable container object for the loop. The default iterator function for the type of the iterable container object for the loop is called on the iterable container object and the result is the loop iterator. An object of the default cursor subtype is created (the loop cursor). the then is False, loop_statement the execution of For a forward container element iterator, the operation First of the iterator type is called on the loop iterator, to produce the initial value for the loop cursor. If the result of calling Has_Element on the initial the value sequence_of_statements is executed with the loop parameter denoting an indexing (see 4.1.6) into the iterable container object for the loop, with the only parameter to the indexing being the current value of the loop cursor; then the Next operation of the iterator type is called with the loop iterator and the loop cursor to produce the next value to be assigned to the loop cursor. This repeats until the result of calling Has_Element on the loop cursor is False, or until the loop is left as a consequence of a transfer of control. For a reverse container element iterator, the operations Last and Previous are called rather than First and Next. If the loop parameter is a constant (see above), then the indexing uses the default constant indexing function for the type of the iterable container object for the loop; otherwise it uses the default variable indexing function. is complete. Otherwise, 5.5.2 Generalized Loop Iteration 13 December 2012 146 Ada Reference Manual — 2012 Edition Examples -- Array component iterator example: for Element of Board loop -- See 3.6.1. Element := Element * 2.0; -- Double each element of Board, a two-dimensional array. end loop; 14/3 For examples of use of generalized iterators, see A.18.32 and the corresponding container packages in A.18.2 and A.18.3. 15/3 5.6 Block Statements A block_statement encloses a handled_sequence_of_statements optionally preceded by a declarative_part. Syntax block_statement ::= [block_statement_identifier:] [declare declarative_part] begin handled_sequence_of_statements end [block_identifier]; If a block_statement has a block_statement_identifier, then the identifier shall be repeated after the end; otherwise, there shall not be an identifier after the end. A block_statement that has no explicit declarative_part has an implicit empty declarative_part. Static Semantics The execution of a block_statement consists of the elaboration of its declarative_part followed by the execution of its handled_sequence_of_statements. Dynamic Semantics Examples Example of a block statement with a local variable: Swap: declare Temp : Integer; begin Temp := V; V := U; U := Temp; end Swap; 5.7 Exit Statements An exit_statement is used to complete the execution of an enclosing loop_statement; the completion is conditional if the exit_statement includes a condition. exit_statement ::= exit [loop_name] [when condition]; Syntax Name Resolution Rules The loop_name, if any, in an exit_statement shall resolve to denote a loop_statement. 147 13 December 2012 Generalized Loop Iteration 5.5.2 1 2 3 4 5 6 7 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 Ada Reference Manual — 2012 Edition Legality Rules Each exit_statement applies to a loop_statement; this is the loop_statement being exited. An exit_- statement with a name is only allowed within the loop_statement denoted by the name, and applies to that loop_statement. An exit_statement without a name is only allowed within a loop_statement, and applies to the innermost enclosing one. An exit_statement that applies to a given loop_statement shall not appear within a body or accept_statement, if this construct is itself enclosed by the given loop_statement. For the execution of an exit_statement, the condition, if present, is first evaluated. If the value of the condition is True, or if there is no condition, a transfer of control is done to complete the loop_statement. If the value of the condition is False, no transfer of control takes place. Dynamic Semantics NOTES 8 Several nested loops can be exited by an exit_statement that names the outer loop. Examples of loops with exit statements: Examples for N in 1 .. Max_Num_Items loop Get_New_Item(New_Item); Merge_Item(New_Item, Storage_File); exit when New_Item = Terminal_Item; end loop; Main_Cycle: loop -- initial statements exit Main_Cycle when Found; -- final statements end loop Main_Cycle; 5.8 Goto Statements A goto_statement specifies an explicit transfer of control from this statement to a target statement with a given label. goto_statement ::= goto label_name; Syntax Name Resolution Rules The label_name shall resolve to denote a label; the statement with that label is the target statement. The innermost sequence_of_statements that encloses the target statement shall also enclose the goto_statement. Furthermore, if a goto_statement is enclosed by an accept_statement or a body, then the target statement shall not be outside this enclosing construct. Legality Rules Dynamic Semantics The execution of a goto_statement transfers control to the target statement, completing the execution of any compound_statement that encloses the goto_statement but does not enclose the target. NOTES 9 The above rules allow transfer of control to a statement of an enclosing sequence_of_statements but not the reverse. Similarly, they prohibit transfers of control such as between alternatives of a case_statement, if_statement, or 5.7 Exit Statements 13 December 2012 148 select_statement; between exception_handlers; or from an exception_handler of a handled_sequence_of_statements back to its sequence_of_statements. Ada Reference Manual — 2012 Edition Examples Example of a loop containing a goto statement: <> for I in 1 .. N-1 loop if A(I) > A(I+1) then Exchange(A(I), A(I+1)); goto Sort; end if; end loop; 7 8 149 13 December 2012 Goto Statements 5.8 Ada Reference Manual — 2012 Edition 6 Subprograms A subprogram is a program unit or intrinsic operation whose execution is invoked by a subprogram call. There are two forms of subprogram: procedures and functions. A procedure call is a statement; a function call is an expression and returns a value. The definition of a subprogram can be given in two parts: a subprogram declaration defining its interface, and a subprogram_body defining its execution. Operators and enumeration literals are functions. 1 A callable entity is a subprogram or entry (see Section 9). A callable entity is invoked by a call; that is, a subprogram call or entry call. A callable construct is a construct that defines the action of a call upon a callable entity: a subprogram_body, entry_body, or accept_statement. 2/3 6.1 Subprogram Declarations A subprogram_declaration declares a procedure or function. Syntax subprogram_declaration ::= [overriding_indicator] subprogram_specification [aspect_specification]; This paragraph was deleted. subprogram_specification ::= procedure_specification | function_specification procedure_specification ::= procedure defining_program_unit_name parameter_profile function_specification ::= function defining_designator parameter_and_result_profile designator ::= [parent_unit_name . ]identifier | operator_symbol defining_designator ::= defining_program_unit_name | defining_operator_symbol defining_program_unit_name ::= [parent_unit_name . ]defining_identifier The optional parent_unit_name is only allowed for library units (see 10.1.1). operator_symbol ::= string_literal The sequence of characters in an operator_symbol shall form a reserved word, a delimiter, or compound delimiter that corresponds to an operator belonging to one of the six categories of operators defined in subclause 4.5. defining_operator_symbol ::= operator_symbol parameter_profile ::= [formal_part] parameter_and_result_profile ::= [formal_part] return [null_exclusion] subtype_mark | [formal_part] return access_definition formal_part ::= (parameter_specification {; parameter_specification}) parameter_specification ::= defining_identifier_list : [aliased] mode [null_exclusion] subtype_mark [:= default_expression] | defining_identifier_list : access_definition [:= default_expression] 151 13 December 2012 Subprograms 6 1 2/3 3/2 4/2 4.1/2 4.2/2 5 6 7 8 9 10/3 11 12 13/2 14 15/3 16 17 Ada Reference Manual — 2012 Edition mode ::= [in] | in out | out A formal parameter is an object directly visible within a subprogram_body that represents the actual parameter passed to the subprogram in a call; it is declared by a parameter_specification. For a formal parameter, the expected type for its default_expression, if any, is that of the formal parameter. Name Resolution Rules 18/3 The parameter mode of a formal parameter conveys the direction of information transfer with the actual parameter: in, in out, or out. Mode in is the default, and is the mode of a parameter defined by an access_definition. 19 A default_expression is only allowed in a parameter_specification for a formal parameter of mode in. Legality Rules 20/3 21 22 23/2 A subprogram_declaration or a generic_subprogram_declaration requires a completion unless the Import aspect (see B.1) is True for the declaration; the completion shall be a body or a renaming_declaration (see 8.5). A completion is not allowed for an abstract_subprogram_declaration (see 3.9.3), a null_procedure_declaration (see 6.7), or an expression_function_declaration (see 6.8). A name that denotes a formal parameter is not allowed within the formal_part in which it is declared, nor within the formal_part of a corresponding body or accept_statement. Static Semantics The profile of (a view of) a callable entity is either a parameter_profile or parameter_and_result_profile; it embodies information about the interface to that entity — for example, the profile includes information about parameters passed to the callable entity. All callable entities have a profile — enumeration literals, other subprograms, and entries. An access-to-subprogram type has a designated profile. Associated with a profile is a calling convention. A subprogram_declaration declares a procedure or a function, as indicated by the initial reserved word, with name and profile as given by its specification. The nominal subtype of a formal parameter is the subtype determined by the optional null_exclusion and the subtype_mark, or defined by the access_definition, in the parameter_specification. The nominal subtype of a function result is the subtype determined by the optional null_exclusion and the subtype_mark, or defined by the access_definition, in the parameter_and_result_profile. 23.1/3 An explicitly aliased parameter is a formal parameter whose parameter_specification includes the reserved word aliased. 24/2 25 26 27/2 An access parameter is a formal in parameter specified by an access_definition. An access result type is a function result type specified by an access_definition. An access parameter or result type is of an anonymous access type (see 3.10). Access parameters of an access-to-object type allow dispatching calls to be controlled by access values. Access parameters of an access-to-subprogram type permit calls to subprograms passed as parameters irrespective of their accessibility level. The subtypes of a profile are: • For any non-access parameters, the nominal subtype of the parameter. • For any access parameters of an access-to-object type, the designated subtype of the parameter type. 27.1/3 • For any access parameters of an access-to-subprogram type, the subtypes of the designated profile of the parameter type. 28/2 • For any non-access result, the nominal subtype of the function result. 6.1 Subprogram Declarations 13 December 2012 152 Ada Reference Manual — 2012 Edition • For any access result type of an access-to-object type, the designated subtype of the result type. • For any access result type of an access-to-subprogram type, the subtypes of the designated profile of the result type. The types of a profile are the types of those subtypes. A subprogram declared by an abstract_subprogram_declaration is abstract; a subprogram declared by a subprogram_declaration is not. See 3.9.3, “Abstract Types and Subprograms”. Similarly, a procedure is a null procedure; a procedure declared by a declared by a null_procedure_declaration subprogram_declaration is not. See 6.7, “Null Procedures”. Finally, a function declared by an expression_function_declaration a expression subprogram_declaration is not. See 6.8, “Expression Functions”. declared by function; function an is a 28.1/2 28.2/3 29 30/3 An overriding_indicator is used to indicate whether overriding is intended. See 8.3.1, “Overriding Indicators”. 30.1/2 The elaboration of a subprogram_declaration has no effect. Dynamic Semantics NOTES 1 A parameter_specification with several identifiers is equivalent to a sequence of single parameter_specifications, as explained in 3.3. 2 Abstract subprograms do not have bodies, and cannot be used in a nondispatching call (see 3.9.3, “Abstract Types and Subprograms”). 3 The evaluation of default_expressions is caused by certain calls, as described in 6.4.1. They are not evaluated during the elaboration of the subprogram declaration. 4 Subprograms can be called recursively and can be called concurrently from multiple tasks. Examples of subprogram declarations: Examples procedure Traverse_Tree; procedure Increment(X : in out Integer); procedure Right_Indent(Margin : out Line_Size); -- see 3.5.4 procedure Switch(From, To : in out Link); -- see 3.10.1 function Random return Probability; -- see 3.5.7 function Min_Cell(X : Link) return Cell; -- see 3.10.1 function Next_Frame(K : Positive) return Frame; -- see 3.10 function Dot_Product(Left, Right : Vector) return Real; -- see 3.6 function "*"(Left, Right : Matrix) return Matrix; -- see 3.6 Examples of in parameters with default expressions: procedure Print_Header(Pages : in Natural; Header : in Line := (1 .. Line'Last => ' '); -- see 3.6 Center : in Boolean := True); 31/2 32 33 34 35 36 37 38 39 40 41 42 153 13 December 2012 Subprogram Declarations 6.1 Ada Reference Manual — 2012 Edition 6.1.1 Preconditions and Postconditions 1/3 For a subprogram or entry, the following language-defined aspects may be specified with an aspect_specification (see 13.1.1): 2/3 Pre 3/3 Pre'Class 4/3 Post 5/3 Post'Class This aspect specifies a specific precondition for a callable entity; it shall be specified by an expression, called a specific precondition expression. If not specified for an entity, the specific precondition expression for the entity is the enumeration literal True. This aspect specifies a class-wide precondition for an operation of a tagged type and its descendants; it shall be specified by an expression, called a class-wide precondition expression. If not specified for an entity, then if no other class-wide precondition applies to the entity, the class-wide precondition expression for the entity is the enumeration literal True. This aspect specifies a specific postcondition for a callable entity; it shall be specified by an expression, called a specific postcondition expression. If not specified for an entity, the specific postcondition expression for the entity is the enumeration literal True. This aspect specifies a class-wide postcondition for an operation of a tagged type and its descendants; it shall be specified by an expression, called a class-wide postcondition expression. If not specified for an entity, the class-wide postcondition expression for the entity is the enumeration literal True. 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 14/3 15/3 16/3 The expected type for a precondition or postcondition expression is any boolean type. Name Resolution Rules Within the expression for a Pre'Class or Post'Class aspect for a primitive subprogram of a tagged type T, a name that denotes a formal parameter of type T is interpreted as having type T'Class. Similarly, a name that denotes a formal access parameter of type access-to-T is interpreted as having type access-to-T'Class. This ensures that the expression is well-defined for a primitive subprogram of a type descended from T. For an attribute_reference with attribute_designator Old, if the attribute reference has an expected type or shall resolve to a given type, the same applies to the prefix; otherwise, the prefix shall be resolved independently of context. Legality Rules The Pre or Post aspect shall not be specified for an abstract subprogram or a null procedure. Only the Pre'Class and Post'Class aspects may be specified for such a subprogram. If a type T has an implicitly declared subprogram P inherited from a parent type T1 and a homograph (see 8.3) of P from a progenitor type T2, and • • • the corresponding primitive subprogram P1 of type T1 is neither null nor abstract; and the class-wide precondition expression True does not apply to P1 (implicitly or explicitly); and there is a class-wide precondition expression that applies to the corresponding primitive subprogram P2 of T2 that does not fully conform to any class-wide precondition expression that applies to P1, then: • If the type T is abstract, the implicitly declared subprogram P is abstract. • Otherwise, the subprogram P requires overriding and shall be overridden with a nonabstract subprogram. 6.1.1 Preconditions and Postconditions 13 December 2012 154 Ada Reference Manual — 2012 Edition If a renaming of a subprogram or entry S1 overrides an inherited subprogram S2, then the overriding is illegal unless each class-wide precondition expression that applies to S1 fully conforms to some class-wide precondition expression that applies to S2 and each class-wide precondition expression that applies to S2 fully conforms to some class-wide precondition expression that applies to S1. Static Semantics If a Pre'Class or Post'Class aspect is specified for a primitive subprogram of a tagged type T, then the associated expression also applies to the corresponding primitive subprogram of each descendant of T. If performing checks is required by the Pre, Pre'Class, Post, or Post'Class assertion policies (see 11.4.2) in effect at the point of a corresponding aspect specification applicable to a given subprogram or entry, then the respective precondition or postcondition expressions are considered enabled. An expression is potentially unevaluated if it occurs within: • any part of an if_expression other than the first condition; • a dependent_expression of a case_expression; • • a membership_choice other than the first of a membership operation. the right operand of a short-circuit control form; or For a prefix X that denotes an object of a nonlimited type, the following attribute is defined: X'Old For each X'Old in a postcondition expression that is enabled, a constant is implicitly declared at the beginning of the subprogram or entry. The constant is of the type of X and is initialized to the result of evaluating X (as an expression) at the point of the constant declaration. The value of X'Old in the postcondition expression is the value of this constant; the type of X'Old is the type of X. These implicit constant declarations occur in an arbitrary order. Reference to this attribute is only allowed within a postcondition expression. The prefix of an Old attribute_reference shall not contain a Result attribute_reference, nor an Old attribute_reference, nor a use of an entity declared within the postcondition expression but not within prefix loop parameter of an enclosing quantified_expression). The prefix of an Old attribute_reference that is potentially unevaluated shall statically denote an entity. (for example, itself the For a prefix F that denotes a function declaration, the following attribute is defined: F'Result Within a postcondition expression for function F, denotes the result object of the function. The type of this attribute is that of the function result except within a Post'Class postcondition expression for a function with a controlling result or with a controlling access result. For a controlling result, the type of the attribute is T'Class, where T is the function result type. For a controlling access result, the type of the attribute is an anonymous access type whose designated type is T'Class, where T is the designated type of the function result type. Use of this attribute is allowed only within a postcondition expression for F. Dynamic Semantics Upon a call of the subprogram or entry, after evaluating any actual parameters, precondition checks are performed as follows: • The specific precondition check begins with the evaluation of the specific precondition expression that applies to the subprogram or entry, if it is enabled; if the expression evaluates to False, Assertions.Assertion_Error is raised; if the expression is not enabled, the check succeeds. 155 13 December 2012 Preconditions and Postconditions 6.1.1 17/3 18/3 19/3 20/3 21/3 22/3 23/3 24/3 25/3 26/3 27/3 28/3 29/3 30/3 31/3 32/3 Ada Reference Manual — 2012 Edition 33/3 34/3 35/3 36/3 37/3 38/3 39/3 40/3 • The class-wide precondition check begins with the evaluation of any enabled class-wide precondition expressions that apply to the subprogram or entry. If and only if all the class-wide precondition expressions evaluate to False, Assertions.Assertion_Error is raised. The precondition checks are performed in an arbitrary order, and if any of the class-wide precondition expressions evaluate to True, it is not specified whether the other class-wide precondition expressions are evaluated. The precondition checks and any check for elaboration of the subprogram body are performed in an arbitrary order. It is not specified whether in a call on a protected operation, the checks are performed before or after starting the protected action. For an entry call, the checks are performed prior to checking whether the entry is open. Upon successful return from a call of the subprogram or entry, prior to copying back any by-copy in out or out parameters, the postcondition check is performed. This consists of the evaluation of any enabled specific and class-wide postcondition expressions that apply to the subprogram or entry. If any of the postcondition expressions evaluate to False, then Assertions.Assertion_Error is raised. The postcondition expressions are evaluated in an arbitrary order, and if any postcondition expression evaluates to False, it is not specified whether any other postcondition expressions are evaluated. The postcondition check, and any constraint or predicate checks associated with in out or out parameters are performed in an arbitrary order. If a precondition or postcondition check fails, the exception is raised at the point of the call; the exception cannot be handled inside the called subprogram or entry. Similarly, any exception raised by the evaluation of a precondition or postcondition expression is raised at the point of call. For any subprogram or entry call (including dispatching calls), the checks that are performed to verify specific precondition expressions and specific and class-wide postcondition expressions are determined by those for the subprogram or entry actually invoked. Note that the class-wide postcondition expressions verified by the postcondition check that is part of a call on a primitive subprogram of type T includes all class-wide postcondition expressions originating in any progenitor of T, even if the primitive subprogram called is inherited from a type T1 and some of the postcondition expressions do not apply to the corresponding primitive subprogram of T1. The class-wide precondition check for a call to a subprogram or entry consists solely of checking the class-wide precondition expressions that apply to the denoted callable entity (not necessarily the one that is invoked). For a call via an access-to-subprogram value, all precondition and postcondition checks performed are determined by the subprogram or entry denoted by the prefix of the Access attribute reference that produced the value. NOTES 5 A precondition is checked just before the call. If another task can change any value that the precondition expression depends on, the precondition need not hold within the subprogram or entry body. 6.1.1 Preconditions and Postconditions 13 December 2012 156 Ada Reference Manual — 2012 Edition 6.2 Formal Parameter Modes A parameter_specification declares a formal parameter of mode in, in out, or out. Static Semantics A parameter is passed either by copy or by reference. When a parameter is passed by copy, the formal parameter denotes a separate object from the actual parameter, and any information transfer between the two occurs only before and after executing the subprogram. When a parameter is passed by reference, the formal parameter denotes (a view of) the object denoted by the actual parameter; reads and updates of the formal parameter directly reference the actual parameter object. A type is a by-copy type if it is an elementary type, or if it is a descendant of a private type whose full type is a by-copy type. A parameter of a by-copy type is passed by copy, unless the formal parameter is explicitly aliased. A type is a by-reference type if it is a descendant of one of the following: • a tagged type; • a task or protected type; • an explicitly limited record type; • a composite type with a subcomponent of a by-reference type; • a private type whose full type is a by-reference type. A parameter of a by-reference type is passed by reference, as is an explicitly aliased parameter of any type. Each value of a by-reference type has an associated object. For a parenthesized expression, qualified_expression, or type_conversion, this object is the one associated with the operand. For a conditional_expression, this object is the one associated with the evaluated dependent_expression. For other parameters, it is unspecified whether the parameter is passed by copy or by reference. Bounded (Run-Time) Errors If one name denotes a part of a formal parameter, and a second name denotes a part of a distinct formal parameter or an object that is not part of a formal parameter, then the two names are considered distinct access paths. If an object is of a type for which the parameter passing mechanism is not specified and is not an explicitly aliased parameter, then it is a bounded error to assign to the object via one access path, and then read the value of the object via a distinct access path, unless the first access path denotes a part of a formal parameter that no longer exists at the point of the second access (due to leaving the corresponding callable construct). The possible consequences are that Program_Error is raised, or the newly assigned value is read, or some old value of the object is read. 1 2 3/3 4 5 6 7/3 8 9 10/3 11/3 12/3 NOTES 6 A formal parameter of mode in is a constant view (see 3.3); it cannot be updated within the subprogram_body. 13 157 13 December 2012 Formal Parameter Modes 6.2 Ada Reference Manual — 2012 Edition 6.3 Subprogram Bodies 1 A subprogram_body specifies the execution of a subprogram. Syntax 2/3 3 4 5 6 7 8 9 10 11 subprogram_body ::= [overriding_indicator] subprogram_specification [aspect_specification] is declarative_part begin handled_sequence_of_statements end [designator]; If a designator appears at the end of a subprogram_body, it shall repeat the defining_designator of the subprogram_specification. Legality Rules In contrast to other bodies, a subprogram_body need not be the completion of a previous declaration, in which case the body declares the subprogram. If the body is a completion, it shall be the completion of a subprogram_declaration or generic_subprogram_declaration. The profile of a subprogram_body that completes a declaration shall conform fully to that of the declaration. Static Semantics A subprogram_body is considered a declaration. It can either complete a previous declaration, or itself be the initial declaration of the subprogram. Dynamic Semantics The elaboration of a nongeneric subprogram_body has no other effect than to establish that the subprogram can from then on be called without failing the Elaboration_Check. The execution of a subprogram_body is invoked by a subprogram call. For this execution the declarative_part is elaborated, and the handled_sequence_of_statements is then executed. Example of procedure body: Examples procedure Push(E : in Element_Type; S : in out Stack) is begin if S.Index = S.Size then raise Stack_Overflow; else S.Index := S.Index + 1; S.Space(S.Index) := E; end if; end Push; Example of a function body: function Dot_Product(Left, Right : Vector) return Real is Sum : Real := 0.0; begin Check(Left'First = Right'First and Left'Last = Right'Last); for J in Left'Range loop Sum := Sum + Left(J)*Right(J); end loop; return Sum; end Dot_Product; 6.3 Subprogram Bodies 13 December 2012 158 Ada Reference Manual — 2012 Edition 6.3.1 Conformance Rules When subprogram profiles are given in more than one place, they are required to conform in one of four ways: type conformance, mode conformance, subtype conformance, or full conformance. 1 Static Semantics As explained in B.1, “Interfacing Aspects”, a convention can be specified for an entity. Unless this International Standard states otherwise, the default convention of an entity is Ada. For a callable entity or access-to-subprogram type, the convention is called the calling convention. The following conventions are defined by the language: 2/1 • The default calling convention for any subprogram not listed below is Ada. The Convention 3/3 aspect may be specified to override the default calling convention (see B.1). • The Intrinsic calling convention represents subprograms that are “built in” to the compiler. The default calling convention is Intrinsic for the following: • an enumeration literal; • a "/=" operator declared implicitly due to the declaration of "=" (see 6.6); • any other implicitly declared subprogram unless it is a dispatching operation of a tagged type; • an inherited subprogram of a generic formal tagged type with unknown discriminants; • an attribute that is a subprogram; • a subprogram declared immediately within a protected_body; • any prefixed view of a subprogram (see 4.1.3). The Access attribute is not allowed for Intrinsic subprograms. • The default calling convention is protected for a protected subprogram, and for an access-to- subprogram type with the reserved word protected in its definition. • The default calling convention is entry for an entry. • The calling convention for an anonymous access-to-subprogram parameter or anonymous access-to-subprogram result is protected if the reserved word protected appears in its definition; otherwise, it is the convention of the subprogram that contains the parameter. • If not specified above as Intrinsic, the calling convention for any inherited or overriding dispatching operation of a tagged type is that of the corresponding subprogram of the parent type. The default calling convention for a new dispatching operation of a tagged type is the convention of the type. Of these four conventions, only Ada and Intrinsic are allowed as a convention_identifier in the specification of a Convention aspect. Two profiles are type conformant if they have the same number of parameters, and both have a result if either does, and corresponding parameter and result types are the same, or, for access parameters or access results, corresponding designated types are the same, or corresponding designated profiles are type conformant. Two profiles are mode conformant if: they are type conformant; and • • corresponding parameters have identical modes and both or neither are explicitly aliased parameters; and 4 5 6 7 8 9 10/2 10.1/2 11 12 13 13.1/3 13.2/1 14/3 15/2 16/3 16.1/3 16.2/3 159 13 December 2012 Conformance Rules 6.3.1 Ada Reference Manual — 2012 Edition 16.3/3 17/3 18/3 18.1/3 18.2/3 18.3/3 • for corresponding access parameters and any access result type, the designated subtypes statically match and either both or neither are access-to-constant, or the designated profiles are subtype conformant. Two profiles are subtype conformant if they are mode conformant, corresponding subtypes of the profile statically match, and the associated calling conventions are the same. The profile of a generic formal subprogram is not subtype conformant with any other profile. Two profiles are fully conformant if they are subtype conformant, if they have access-to-subprogram results whose designated profiles are fully conformant, and for corresponding parameters: they have the same names; and • • both or neither have null_exclusions; and • neither have default_expressions, or they both have default_expressions that are fully conformant with one another; and 18.4/3 • for access-to-subprogram parameters, the designated profiles are fully conformant. 19 20 21 Two expressions are fully conformant if, after replacing each use of an operator with the equivalent function_call: • each constituent construct of one corresponds to an instance of the same syntactic category in the other, except that an expanded name may correspond to a direct_name (or character_literal) or to a different expanded name in the other; and • each direct_name, character_literal, and selector_name that is not part of the prefix of an expanded name in one denotes the same declaration as the corresponding direct_name, character_literal, or selector_name in the other; and 21.1/3 • each attribute_designator in one is the same as the corresponding attribute_designator in the other; and 22 23 24 • each primary that is a literal in one has the same value as the corresponding literal in the other. Two known_discriminant_parts are fully conformant if they have the same number of discriminants, and discriminants in the same positions have the same names, statically matching subtypes, and default_expressions that are fully conformant with one another. Two discrete_subtype_definitions are fully conformant if they are both subtype_indications or are both ranges, the subtype_marks (if any) denote the same subtype, and the corresponding simple_expressions of the ranges (if any) fully conform. 24.1/2 The prefixed view profile of a subprogram is the profile obtained by omitting the first parameter of that subprogram. There is no prefixed view profile for a parameterless subprogram. For the purposes of defining subtype and mode conformance, the convention of a prefixed view profile is considered to match that of either an entry or a protected operation. 25 An implementation may declare an operator declared in a language-defined library unit to be intrinsic. Implementation Permissions 6.3.1 Conformance Rules 13 December 2012 160 Ada Reference Manual — 2012 Edition 6.3.2 Inline Expansion of Subprograms Subprograms may be expanded in line at the call site. Paragraphs 2 through 4 were moved to Annex J, “Obsolescent Features”. Static Semantics For a callable entity or a generic subprogram, the following language-defined representation aspect may be specified: Inline The type of aspect Inline is Boolean. When aspect Inline is True for a callable entity, inline expansion is desired for all calls to that entity. When aspect Inline is True for a generic subprogram, inline expansion is desired for all calls to all instances of that generic subprogram. 1 5/3 5.1/3 If directly specified, the aspect_definition shall be a static expression. This aspect is never inherited; if not directly specified, the aspect is False. 5.2/3 For each call, an implementation is free to follow or to ignore the recommendation determined by the Inline aspect. 6/3 Implementation Permissions 6.4 Subprogram Calls A subprogram call is either a procedure_call_statement or a function_call; it invokes the execution of the subprogram_body. The call specifies the association of the actual parameters, if any, with formal parameters of the subprogram. Syntax procedure_call_statement ::= procedure_name; | procedure_prefix actual_parameter_part; function_call ::= function_name | function_prefix actual_parameter_part actual_parameter_part ::= (parameter_association {, parameter_association}) parameter_association ::= [formal_parameter_selector_name =>] explicit_actual_parameter explicit_actual_parameter ::= expression | variable_name A parameter_association is named or positional according to whether or not the formal_parameter_- selector_name is specified. Any positional associations shall precede any named associations. Named associations are not allowed if the prefix in a subprogram call is an attribute_reference. 1 2 3 4 5 6 7 The name or prefix given in a procedure_call_statement shall resolve to denote a callable entity that is a procedure, or an entry renamed as (viewed as) a procedure. The name or prefix given in a function_call shall resolve to denote a callable entity that is a function. The name or prefix shall not resolve to denote an 8/2 Name Resolution Rules 161 13 December 2012 Inline Expansion of Subprograms 6.3.2 Ada Reference Manual — 2012 Edition abstract subprogram unless it is also a dispatching subprogram. When there is an actual_parameter_part, the prefix can be an implicit_dereference of an access-to-subprogram value. 9 A subprogram call shall contain at most one association for each formal parameter. Each formal parameter without an association shall have a default_expression (in the profile of the view denoted by the name or prefix). This rule is an overloading rule (see 8.6). Dynamic Semantics 10/2 For the execution of a subprogram call, the name or prefix of the call is evaluated, and each parameter_- association is evaluated (see 6.4.1). If a default_expression is used, an implicit parameter_association is assumed for this rule. These evaluations are done in an arbitrary order. The subprogram_body is then executed, or a call on an entry or protected subprogram is performed (see 3.9.2). Finally, if the subprogram completes normally, then after it is left, any necessary assigning back of formal to actual parameters occurs (see 6.4.1). 10.1/2 If the name or prefix of a subprogram call denotes a prefixed view (see 4.1.3), the subprogram call is equivalent to a call on the underlying subprogram, with the first actual parameter being provided by the prefix of the prefixed view (or the Access attribute of this prefix if the first formal parameter is an access parameter), and the remaining actual parameters given by the actual_parameter_part, if any. 11/2 12/2 13 14 15 16 17 18 19 20/3 21 22 23/3 The exception Program_Error is raised at the point of a function_call if the function completes normally without executing a return statement. A function_call denotes a constant, as defined in 6.5; the nominal subtype of the constant is given by the nominal subtype of the function result. Examples of procedure calls: Examples Traverse_Tree; -- see 6.1 Print_Header(128, Title, True); -- see 6.1 Switch(From => X, To => Next); -- see 6.1 Print_Header(128, Header => Title, Center => True); -- see 6.1 Print_Header(Header => Title, Center => True, Pages => 128); -- see 6.1 Examples of function calls: Dot_Product(U, V) -- see 6.1 and 6.3 Clock -- see 9.6 F.all -- presuming F is of an access-to-subprogram type — see 3.10 Examples of procedures with default expressions: procedure Activate(Process : in Process_Name; After : in Process_Name := No_Process; Wait : in Duration := 0.0; Prior : in Boolean := False); procedure Pair(Left, Right : in Person_Name := new Person(M)); -- see 3.10.1 Examples of their calls: Activate(X); Activate(X, After => Y); Activate(X, Wait => 60.0, Prior => True); Activate(X, Y, 10.0, False); Pair; Pair(Left => new Person(F), Right => new Person(M)); 6.4 Subprogram Calls 13 December 2012 162 Ada Reference Manual — 2012 Edition NOTES 7 If a default_expression is used for two or more parameters in a multiple parameter_specification, the default_- expression is evaluated once for each omitted parameter. Hence in the above examples, the two calls of Pair are equivalent. Examples Examples of overloaded subprograms: procedure Put(X : in Integer); procedure Put(X : in String); procedure Set(Tint : in Color); procedure Set(Signal : in Light); Examples of their calls: Put(28); Put("no possible ambiguity here"); Set(Tint => Red); Set(Signal => Red); Set(Color'(Red)); -- Set(Red) would be ambiguous since Red may -- denote a value either of type Color or of type Light 6.4.1 Parameter Associations A parameter association defines the association between an actual parameter and a formal parameter. Name Resolution Rules The formal_parameter_selector_name of a named parameter_association shall resolve to denote a parameter_specification of the view being called; this is the formal parameter of the association. The formal parameter for a positional parameter_association is the parameter with the corresponding position in the formal part of the view being called. The actual parameter is either the explicit_actual_parameter given in a parameter_association for a given formal parameter, or the corresponding default_expression if no parameter_association is given for the formal parameter. The expected type for an actual parameter is the type of the corresponding formal parameter. If the mode is in, the actual is interpreted as an expression; otherwise, the actual is interpreted only as a name, if possible. If the mode is in out or out, the actual shall be a name that denotes a variable. Legality Rules If the formal parameter is an explicitly aliased parameter, the type of the actual parameter shall be tagged or the actual parameter shall be an aliased view of an object. Further, if the formal parameter subtype F is untagged: • • the subtype F shall statically match the nominal subtype of the actual object; or the subtype F shall be unconstrained, discriminated in its full view, and unconstrained in any partial view. In a function call, the accessibility level of the actual object for each explicitly aliased parameter shall not be statically deeper than the accessibility level of the master of the call (see 3.10.2). Two names are known to denote the same object if: 163 13 December 2012 Subprogram Calls 6.4 24 25 26 27 28 29 30 31 1 2/3 3 4 5 6/3 6.1/3 6.2/3 6.3/3 6.4/3 Ada Reference Manual — 2012 Edition 6.5/3 6.6/3 • both names statically denote the same stand-alone object or parameter; or • both names are selected_components, their prefixes are known to denote the same object, and their selector_names denote the same component; or 6.7/3 • both names are dereferences (implicit or explicit) and the dereferenced names are known to denote the same object; or 6.8/3 • both names are indexed_components, their prefixes are known to denote the same object, and each of the pairs of corresponding index values are either both static expressions with the same static value or both names that are known to denote the same object; or 6.9/3 • both names are slices, their prefixes are known to denote the same object, and the two slices have statically matching index constraints; or 6.10/3 • one of the two names statically denotes a renaming declaration whose renamed object_name is known to denote the same object as the other, the prefix of any dereference within the renamed object_name is not a variable, and any expression within the renamed object_name contains no references to variables nor calls on nonstatic functions. 6.11/3 Two names are known to refer to the same object if 6.12/3 6.13/3 • The two names are known to denote the same object; or • One of the names is a selected_component, indexed_component, or slice and its prefix is known to refer to the same object as the other name; or 6.14/3 • One of the two names statically denotes a renaming declaration whose renamed object_name is known to refer to the same object as the other name. 6.15/3 6.16/3 6.17/3 6.18/3 If a call C has two or more parameters of mode in out or out that are of an elementary type, then the call is legal only if: • For each name N that is passed as a parameter of mode in out or out to the call C, there is no other name among the other parameters of mode in out or out to C that is known to denote the same object. If a construct C has two or more direct constituents that are names or expressions whose evaluation may occur in an arbitrary order, at least one of which contains a function call with an in out or out parameter, then the construct is legal only if: • For each name N that is passed as a parameter of mode in out or out to some inner function call C2 (not including the construct C itself), there is no other name anywhere within a direct constituent of the construct C other than the one containing C2, that is known to refer to the same object. 6.19/3 For the purposes of checking this rule: 6.20/3 6.21/3 6.22/3 • For an array aggregate, an expression associated with a discrete_choice_list that has two or more discrete choices, or that has a nonstatic range, is considered as two or more separate occurrences of the expression; • For a record aggregate: • The expression of a record_component_association is considered to occur once for each associated component; and 6.23/3 • The default_expression for each record_component_association with <> for which the associated component has a default_expression is considered part of the aggregate; 6.24/3 • For a call, any default_expression evaluated as part of the call is considered part of the call. 6.4.1 Parameter Associations 13 December 2012 164 Ada Reference Manual — 2012 Edition Dynamic Semantics For the evaluation of a parameter_association: • The actual parameter is first evaluated. • For an access parameter, the access_definition is elaborated, which creates the anonymous access type. • For a parameter (of any mode) that is passed by reference (see 6.2), a view conversion of the actual parameter to the nominal subtype of the formal parameter is evaluated, and the formal parameter denotes that conversion. • For an in or in out parameter that is passed by copy (see 6.2), the formal parameter object is created, and the value of the actual parameter is converted to the nominal subtype of the formal parameter and assigned to the formal. • For an out parameter that is passed by copy, the formal parameter object is created, and: • For an access type, the formal parameter is initialized from the value of the actual, without checking that the value satisfies any constraint, any predicate, or any exclusion of the null value; • For a scalar type that has the Default_Value aspect specified, the formal parameter is initialized from the value of the actual, without checking that the value satisfies any constraint or any predicate; • For a composite type with discriminants or that has implicit initial values for any subcomponents (see 3.3.1), the behavior is as for an in out parameter passed by copy. • For any other type, the formal parameter is uninitialized. If composite, a view conversion of the actual parameter to the nominal subtype of the formal is evaluated (which might raise Constraint_Error), and the actual subtype of the formal is that of the view conversion. If elementary, the actual subtype of the formal is given by its nominal subtype. • In a function call, for each explicitly aliased parameter, a check is made that the accessibility level of the master of the actual object is not deeper than that of the master of the call (see 3.10.2). A formal parameter of mode in out or out with discriminants is constrained if either its nominal subtype or the actual parameter is constrained. After normal completion and leaving of a subprogram, for each in out or out parameter that is passed by copy, the value of the formal parameter is converted to the subtype of the variable given as the actual parameter and assigned to it. These conversions and assignments occur in an arbitrary order. Erroneous Execution If the nominal subtype of a formal parameter with discriminants is constrained or indefinite, and the parameter is passed by reference, then the execution of the call is erroneous if the value of any discriminant of the actual is changed while the formal parameter exists (that is, before leaving the corresponding callable construct). 7 8 9 10 11 12 13/3 13.1/3 14 15 15.1/3 16 17 18/3 165 13 December 2012 Parameter Associations 6.4.1 Ada Reference Manual — 2012 Edition 6.5 Return Statements 1/2 A simple_return_statement or extended_return_statement (collectively called a return statement) is used to complete the execution of the innermost enclosing subprogram_body, entry_body, or accept_- statement. 2/2 2.1/3 2.2/3 Syntax simple_return_statement ::= return [expression]; extended_return_object_declaration ::= defining_identifier : [aliased][constant] return_subtype_indication [:= expression] extended_return_statement ::= return extended_return_object_declaration [do handled_sequence_of_statements end return]; 2.3/2 return_subtype_indication ::= subtype_indication | access_definition 3/2 4/2 5/3 Name Resolution Rules The result subtype of a function is the subtype denoted by the subtype_mark, or defined by the access_definition, after the reserved word return in the profile of the function. The expected type for the expression, if any, of a simple_return_statement is the result type of the corresponding function. The expected type for the expression of an extended_return_statement is that of the return_subtype_- indication. Legality Rules A return statement shall be within a callable construct, and it applies to the innermost callable construct or extended_return_statement that contains it. A return statement shall not be within a body that is within the construct to which the return statement applies. A function body shall contain at least one return statement that applies to the function body, unless the function contains code_statements. A simple_return_statement shall include an expression if and only if it applies to a function body. An extended_return_statement shall apply to a function body. An extended_return_statement with the reserved word constant shall include an expression. 5.1/2 For an extended_return_statement that applies to a function body: 5.2/3 5.3/2 5.4/3 • If the result subtype of the function is defined by a subtype_mark, the return_subtype_- indication shall be a subtype_indication. The type of the subtype_indication shall be covered by the result type of the function. The subtype defined by the subtype_indication shall be statically compatible with the result subtype of the function; if the result type of the function is elementary, the two subtypes shall statically match. If the result subtype of the function is indefinite, then the subtype defined by the subtype_indication shall be a definite subtype, or there shall be an expression. • If the result subtype of the function is defined by an access_definition, the return_subtype_- indication shall be an access_definition. The subtype defined by the access_definition shall statically match the result subtype of the function. The accessibility level of this anonymous access subtype is that of the result subtype. • If the result subtype of the function is class-wide, the accessibility level of the type of the subtype defined by the return_subtype_indication shall not be statically deeper than that of the master that elaborated the function body. 6.5 Return Statements 13 December 2012 166 Ada Reference Manual — 2012 Edition For any return statement that applies to a function body: • If the result subtype of the function is limited, then the expression of the return statement (if any) shall meet the restrictions described in 7.5. • If the result subtype of the function is class-wide, the accessibility level of the type of the expression (if any) of the return statement shall not be statically deeper than that of the master that elaborated the function body. • If the subtype determined by the expression of the simple_return_statement or by the return_subtype_indication has one or more access discriminants, the accessibility level of the anonymous access type of each access discriminant shall not be statically deeper than that of the master that elaborated the function body. 5.5/3 5.6/3 5.7/3 5.8/3 If the keyword aliased is present in an extended_return_object_declaration, the type of the extended return object shall be immutably limited. 5.9/3 Static Semantics Within an extended_return_statement, the return object is declared with the given defining_identifier, with the nominal subtype defined by the return_subtype_indication. An extended_return_statement with the reserved word constant is a full constant declaration that declares the return object to be a constant object. 5.10/3 Dynamic Semantics For the execution of an extended_return_statement, the subtype_indication or access_definition is elaborated. This creates the nominal subtype of the return object. If there is an expression, it is evaluated and converted to the nominal subtype (which might raise Constraint_Error — see 4.6); the return object is created and the converted value is assigned to the return object. Otherwise, the return object is created and initialized by default as for a stand-alone object of its nominal subtype (see 3.3.1). If the nominal subtype is indefinite, the return object is constrained by its initial value. A check is made that the value of the return object belongs to the function result subtype. Constraint_Error is raised if this check fails. 5.11/3 For the execution of a simple_return_statement, the expression (if any) is first evaluated, converted to the result subtype, and then is assigned to the anonymous return object. If the return object has any parts that are tasks, the activation of those tasks does not occur until after the function returns (see 9.2). If the result type of a function is a specific tagged type, the tag of the return object is that of the result type. If the result type is class-wide, the tag of the return object is that of the type of the subtype_indication if it is specific, or otherwise that of the value of the expression. A check is made that the master of the type identified by the tag of the result includes the elaboration of the master that elaborated the function body. If this check fails, Program_Error is raised. 6/2 7/2 8/3 If the result subtype of the function is defined by an access_definition designating a specific tagged type T, a check is made that the result value is null or the tag of the object designated by the result value identifies T. Constraint_Error is raised if this check fails. 8.1/3 Paragraphs 9 through 20 were deleted. If any part of the specific type of the return object of a function (or coextension thereof) has one or more access discriminants whose value is not constrained by the result subtype of the function, a check is made that the accessibility level of the anonymous access type of each access discriminant, as determined by the 21/3 167 13 December 2012 Return Statements 6.5 Ada Reference Manual — 2012 Edition expression or the return_subtype_indication of the return statement, is not deeper than the level of the master of the call (see 3.10.2). If this check fails, Program_Error is raised. 22/3 For the execution of an extended_return_statement, the handled_sequence_of_statements is executed. Within this handled_sequence_of_statements, the execution of a simple_return_statement that applies to the extended_return_statement causes a transfer of control that completes the extended_return_- statement. Upon completion of a return statement that applies to a callable construct by the normal completion of a simple_return_statement or by reaching the end return of an extended_return_- statement, a transfer of control is performed which completes the execution of the callable construct, and returns to the caller. 23/2 In the case of a function, the function_call denotes a constant view of the return object. Implementation Permissions 24/3 For a function call used to initialize a composite object with a constrained nominal subtype or used to initialize a return object that is built in place into such an object: 24.1/3 24.2/3 • If the result subtype of the function is constrained, and conversion of an object of this subtype to the subtype of the object being initialized would raise Constraint_Error, then Constraint_Error may be raised before calling the function. • If the result subtype of the function is unconstrained, and a return statement is executed such that the return object is known to be constrained, and conversion of the return object to the subtype of the object being initialized would raise Constraint_Error, then Constraint_Error may be raised at the point of the call (after abandoning the execution of the function body). 25 Examples of return statements: Examples 26/2 27 28/2 return; -- in a procedure body, entry_body, -- accept_statement, or extended_return_statement return Key_Value(Last_Index); -- in a function body return Node : Cell do -- in a function body, see 3.10.1 for Cell Node.Value := Result; Node.Succ := Next_Node; end return; 6.5 Return Statements 13 December 2012 168 Ada Reference Manual — 2012 Edition 6.5.1 Nonreturning Procedures Specifying aspect No_Return to have the value True indicates that a procedure cannot return normally; it may propagate an exception or loop forever. 1/3 Paragraphs 2 and 3 were moved to Annex J, “Obsolescent Features”. Static Semantics For a procedure or generic procedure, the following language-defined representation aspect may be specified: No_Return The type of aspect No_Return is Boolean. When aspect No_Return is True for an entity, the entity is said to be nonreturning. If directly specified, the aspect_definition shall be a static expression. This aspect is never inherited; if not directly specified, the aspect is False. If a generic procedure is nonreturning, then so are its instances. If a procedure declared within a generic unit is nonreturning, then so are the corresponding copies of that procedure in instances. Aspect No_Return shall not be specified for a null procedure nor an instance of a generic unit. A return statement shall not apply to a nonreturning procedure or generic procedure. Legality Rules A procedure shall be nonreturning if it overrides a dispatching nonreturning procedure. In addition to the places where Legality Rules normally apply (see 12.3), this rule applies also in the private part of an instance of a generic unit. If a renaming-as-body completes a nonreturning procedure declaration, then the renamed procedure shall be nonreturning. 3.1/3 3.2/3 3.3/3 3.4/3 4/3 5/2 6/2 7/2 Paragraph 8 was deleted. If the body of a nonreturning procedure completes normally, Program_Error is raised at the point of the call. 9/2 Dynamic Semantics procedure Fail(Msg : String) -- raises Fatal_Error exception with No_Return; -- Inform compiler and reader that procedure never returns normally Examples 10/3 169 13 December 2012 Nonreturning Procedures 6.5.1 Ada Reference Manual — 2012 Edition 6.6 Overloading of Operators 1 2 3/3 4 5 An operator is a function whose designator is an operator_symbol. Operators, like other functions, may be overloaded. Each use of a unary or binary operator is equivalent to a function_call with function_prefix being the corresponding operator_symbol, and with (respectively) one or two positional actual parameters being the operand(s) of the operator (in order). Name Resolution Rules Legality Rules The subprogram_specification of a unary or binary operator shall have one or two parameters, respectively. The parameters shall be of mode in. A generic function instantiation whose designator is an operator_symbol is only allowed if the specification of the generic function has the corresponding number of parameters, and they are all of mode in. Default_expressions are not allowed for the parameters of an operator (whether the operator is declared with an explicit subprogram_specification or by a generic_instantiation). An explicit declaration of "/=" shall not have a result type of the predefined type Boolean. 6/3 An explicit declaration of "=" whose result type is Boolean implicitly declares an operator "/=" that gives the complementary result. Static Semantics 7 8 9 NOTES 8 The operators "+" and "–" are both unary and binary operators, and hence may be overloaded with both one- and two- parameter functions. Examples of user-defined operators: function "+" (Left, Right : Matrix) return Matrix; function "+" (Left, Right : Vector) return Vector; Examples -- assuming that A, B, and C are of the type Vector -- the following two statements are equivalent: A := B + C; A := "+"(B, C); 6.6 Overloading of Operators 13 December 2012 170 Ada Reference Manual — 2012 Edition 6.7 Null Procedures A null_procedure_declaration provides a shorthand to declare a procedure with an empty body. null_procedure_declaration ::= [overriding_indicator] procedure_specification is null [aspect_specification]; Syntax Legality Rules 1/2 2/3 If a null_procedure_declaration is a completion, it shall be the completion of a subprogram_declaration or generic_subprogram_declaration. The profile of a null_procedure_declaration that completes a declaration shall conform fully to that of the declaration. 2.1/3 A null_procedure_declaration declares a null procedure. A completion is not allowed for a null_procedure_declaration; however, a null_procedure_declaration can complete a previous declaration. 3/3 Static Semantics Dynamic Semantics The execution of a null procedure is invoked by a subprogram call. For the execution of a subprogram call on a null procedure, the execution of the subprogram_body has no effect. The elaboration of a null_procedure_declaration has no other effect than to establish that the null procedure can be called without failing the Elaboration_Check. procedure Simplify(Expr : in out Expression) is null; -- see 3.9 -- By default, Simplify does nothing, but it may be overridden in extensions of Expression Examples 4/2 5/3 6/2 171 13 December 2012 Null Procedures 6.7 Ada Reference Manual — 2012 Edition 6.8 Expression Functions 1/3 An expression_function_declaration provides a shorthand to declare a function whose body consists of a single return statement. 2/3 expression_function_declaration ::= [overriding_indicator] function_specification is (expression) [aspect_specification]; Syntax 3/3 The expected type for the expression of an expression_function_declaration is the result type (see 6.5) of the function. Name Resolution Rules Legality Rules 4/3 5/3 6/3 7/3 If an expression_function_declaration the completion of a subprogram_declaration or generic_subprogram_declaration. The profile of an expression_function_- declaration that completes a declaration shall conform fully to that of the declaration. is a completion, it shall be If the result subtype has one or more unconstrained access discriminants, the accessibility level of the anonymous access type of each access discriminant, as determined by the expression of the expression function, shall not be statically deeper than that of the master that elaborated the expression_function_- declaration. An expression_function_declaration declares an expression function. A completion is not allowed for an expression_function_declaration; however, an expression_function_declaration can complete a previous declaration. Static Semantics Dynamic Semantics The execution of an expression function is invoked by a subprogram call. For the execution of a subprogram call on an expression function, the execution of the subprogram_body executes an implicit function body containing only a simple_return_statement whose expression is that of the expression function. 8/3 The elaboration of an expression_function_declaration has no other effect than to establish that the expression function can be called without failing the Elaboration_Check. 9/3 function Is_Origin (P : in Point) return Boolean is -- see 3.9 (P.X = 0.0 and P.Y = 0.0); Examples 6.8 Expression Functions 13 December 2012 172 Ada Reference Manual — 2012 Edition 7 Packages Packages are program units that allow the specification of groups of logically related entities. Typically, a package contains the declaration of a type (often a private type or private extension) along with the declarations of primitive subprograms of the type, which can be called from outside the package, while their inner workings remain hidden from outside users. 1 7.1 Package Specifications and Declarations A package is generally provided in two parts: a package_specification and a package_body. Every package has a package_specification, but not all packages have a package_body. 1 package_declaration ::= package_specification; Syntax package_specification ::= package defining_program_unit_name [aspect_specification] is {basic_declarative_item} [private {basic_declarative_item}] end [[parent_unit_name.]identifier] If an identifier or parent_unit_name.identifier appears at the end of a package_specification, then this sequence of lexical elements shall repeat the defining_program_unit_name. Legality Rules A package_declaration or generic_package_declaration requires a completion (a body) if it contains any basic_declarative_item its package_specification. requires a completion, but whose completion is not that in Static Semantics The first list of basic_declarative_items of a package_specification of a package other than a generic formal package is called the visible part of the package. The optional list of basic_declarative_items after the reserved word private (of any package_specification) is called the private part of the package. If the reserved word private does not appear, the package has an implicit empty private part. Each list of basic_declarative_items of a package_specification forms a declaration list of the package. An entity declared in the private part of a package is visible only within the declarative region of the package itself (including any child units — see 10.1.1). In contrast, expanded names denoting entities declared in the visible part can be used even outside the package; furthermore, direct visibility of such entities can be achieved by means of use_clauses (see 4.1.3 and 8.4). Dynamic Semantics The elaboration of a package_declaration consists of the elaboration of its basic_declarative_items in the given order. NOTES 1 The visible part of a package contains all the information that another program unit is able to know about the package. 2 If a declaration occurs immediately within the specification of a package, and the declaration has a corresponding completion that is a body, then that body has to occur immediately within the body of the package. 173 13 December 2012 Packages 7 2 3/3 4 5/2 6/2 7 8 9 10 11 12 13 14 15 16 17 1 2/3 3 4 5/3 Ada Reference Manual — 2012 Edition Example of a package declaration: Examples package Rational_Numbers is type Rational is record Numerator : Integer; Denominator : Positive; end record; function "="(X,Y : Rational) return Boolean; function "/" (X,Y : Integer) return Rational; -- to construct a rational number function "+" (X,Y : Rational) return Rational; function "-" (X,Y : Rational) return Rational; function "*" (X,Y : Rational) return Rational; function "/" (X,Y : Rational) return Rational; end Rational_Numbers; There are also many examples of package declarations in the predefined language environment (see Annex A). 7.2 Package Bodies In contrast to the entities declared in the visible part of a package, the entities declared in the package_body are visible only within the package_body itself. As a consequence, a package with a package_body can be used for the construction of a group of related subprograms in which the logical operations available to clients are clearly isolated from the internal entities. Syntax package_body ::= package body defining_program_unit_name [aspect_specification] is declarative_part [begin handled_sequence_of_statements] end [[parent_unit_name.]identifier]; If an identifier or parent_unit_name.identifier appears at the end of a package_body, then this sequence of lexical elements shall repeat the defining_program_unit_name. Legality Rules A package_body shall be the completion of a previous package_declaration or generic_package_- declaration. A library package_declaration or library generic_package_declaration shall not have a body unless it requires a body; pragma Elaborate_Body can be used to require a library_unit_declaration to have a body (see 10.2.1) if it would not otherwise require one. Static Semantics In any package_body without statements there is an implicit null_statement. For any package_- declaration without an explicit completion, there is an implicit package_body containing a single null_statement. For a noninstance, nonlibrary package, this body occurs at the end of the declarative_part of the innermost enclosing program unit or block_statement; if there are several such packages, the order of the implicit package_bodies is unspecified. (For an instance, the implicit package_body occurs at the place of the instantiation (see 12.3). For a library package, the place is partially determined by the elaboration dependences (see Clause 10).) 7.1 Package Specifications and Declarations 13 December 2012 174 Ada Reference Manual — 2012 Edition For the elaboration of a nongeneric package_body, its declarative_part is first elaborated, and its handled_sequence_of_statements is then executed. Dynamic Semantics NOTES 3 A variable declared in the body of a package is only visible within this body and, consequently, its value can only be changed within the package_body. In the absence of local tasks, the value of such a variable remains unchanged between calls issued from outside the package to subprograms declared in the visible part. The properties of such a variable are similar to those of a “static” variable of C. 4 The elaboration of the body of a subprogram explicitly declared in the visible part of a package is caused by the elaboration of the body of the package. Hence a call of such a subprogram by an outside program unit raises the exception Program_Error if the call takes place before the elaboration of the package_body (see 3.11). Example of a package body (see 7.1): Examples package body Rational_Numbers is procedure Same_Denominator (X,Y : in out Rational) is begin -- reduces X and Y to the same denominator: ... end Same_Denominator; function "="(X,Y : Rational) return Boolean is U : Rational := X; V : Rational := Y; begin Same_Denominator (U,V); return U.Numerator = V.Numerator; end "="; function "/" (X,Y : Integer) return Rational is begin if Y > 0 then return (Numerator => X, Denominator => Y); else return (Numerator => -X, Denominator => -Y); end if; end "/"; function "+" (X,Y : Rational) return Rational is ... end "+"; function "-" (X,Y : Rational) return Rational is ... end "-"; function "*" (X,Y : Rational) return Rational is ... end "*"; function "/" (X,Y : Rational) return Rational is ... end "/"; end Rational_Numbers; 7.3 Private Types and Private Extensions The declaration (in the visible part of a package) of a type as a private type or private extension serves to separate the characteristics that can be used directly by outside program units (that is, the logical properties) from other characteristics whose direct use is confined to the package (the details of the definition of the type itself). See 3.9.1 for an overview of type extensions. private_type_declaration ::= type defining_identifier [discriminant_part] is [[abstract] tagged] [limited] private [aspect_specification]; Syntax 175 13 December 2012 Package Bodies 7.2 6 7 8 9 10 11 12 13 14 15 1 2/3 3/3 4 5 6/2 7 Ada Reference Manual — 2012 Edition private_extension_declaration ::= type defining_identifier [discriminant_part] is [abstract] [limited | synchronized] new ancestor_subtype_indication [and interface_list] with private [aspect_specification]; Legality Rules A private_type_declaration or private_extension_declaration declares a partial view of the type; such a declaration is allowed only as a declarative_item of the visible part of a package, and it requires a completion, which shall be a full_type_declaration that occurs as a declarative_item of the private part of the package. The view of the type declared by the full_type_declaration is called the full view. A generic formal private type or a generic formal private extension is also a partial view. A type shall be completely defined before it is frozen (see 3.11.1 and 13.14). Thus, neither the declaration of a variable of a partial view of a type, nor the creation by an allocator of an object of the partial view are allowed before the full declaration of the type. Similarly, before the full declaration, the name of the partial view cannot be used in a generic_instantiation or in a representation item. A private type is limited if its declaration includes the reserved word limited; a private extension is limited if its ancestor type is a limited type that is not an interface type, or if the reserved word limited or synchronized appears in its definition. If the partial view is nonlimited, then the full view shall be nonlimited. If a tagged partial view is limited, then the full view shall be limited. On the other hand, if an untagged partial view is limited, the full view may be limited or nonlimited. If the partial view is tagged, then the full view shall be tagged. On the other hand, if the partial view is untagged, then the full view may be tagged or untagged. In the case where the partial view is untagged and the full view is tagged, no derivatives of the partial view are allowed within the immediate scope of the partial view; derivatives of the full view are allowed. 7.1/2 If a full type has a partial view that is tagged, then: 7.2/2 7.3/2 8 • • the partial view shall be a synchronized tagged type (see 3.9.4) if and only if the full type is a synchronized tagged type; the partial view shall be a descendant of an interface type (see 3.9.4) if and only if the full type is a descendant of the interface type. The ancestor subtype of a private_extension_declaration is the subtype defined by the ancestor_- subtype_indication; the ancestor type shall be a specific tagged type. The full view of a private extension shall be derived (directly or indirectly) from the ancestor type. In addition to the places where Legality Rules normally apply (see 12.3), the requirement that the ancestor be specific applies also in the private part of an instance of a generic unit. 8.1/2 If the reserved word limited appears in a private_extension_declaration, the ancestor type shall be a limited type. If the reserved word synchronized appears in a private_extension_declaration, the ancestor type shall be a limited interface. 9 10 If the declaration of a partial view includes a known_discriminant_part, then the full_type_declaration shall have a fully conforming (explicit) known_discriminant_part (see 6.3.1, “Conformance Rules”). The ancestor subtype may be unconstrained; the parent subtype of the full view is required to be constrained (see 3.7). If a private extension inherits known discriminants from the ancestor subtype, then the full view shall also inherit its discriminants from the ancestor subtype, and the parent subtype of the full view shall be constrained if and only if the ancestor subtype is constrained. 7.3 Private Types and Private Extensions 13 December 2012 176 Ada Reference Manual — 2012 Edition If the full_type_declaration for a private extension includes a derived_type_definition, then the reserved word limited shall appear in the full_type_declaration if and only if it also appears in the private_extension_declaration. 10.1/3 If a partial view has unknown discriminants, then the full_type_declaration may define a definite or an indefinite subtype, with or without discriminants. If a partial view has neither known nor unknown discriminants, then the full_type_declaration shall define a definite subtype. If the ancestor subtype of a private extension has constrained discriminants, then the parent subtype of the full view shall impose a statically matching constraint on those discriminants. Static Semantics A private_type_declaration declares a private type and its first subtype. Similarly, a private_extension_- declaration declares a private extension and its first subtype. A declaration of a partial view and the corresponding full_type_declaration define two views of a single type. The declaration of a partial view together with the visible part define the operations that are available to outside program units; the declaration of the full view together with the private part define other operations whose direct use is possible only within the declarative region of the package itself. Moreover, within the scope of the declaration of the full view, the characteristics (see 3.4) of the type are determined by the full view; in particular, within its scope, the full view determines the classes that include the type, which components, entries, and protected subprograms are visible, what attributes and other predefined operations are allowed, and whether the first subtype is static. See 7.3.1. 11 12 13 14 15/3 For a private extension, the characteristics (including components, but excluding discriminants if there is a new discriminant_part specified), predefined operators, and inherited user-defined primitive subprograms are determined by its ancestor type and its progenitor types (if any), in the same way that those of a record extension are determined by those of its parent type and its progenitor types (see 3.4 and 7.3.1). 16/3 The elaboration of a private_type_declaration creates a partial view of a type. The elaboration of a private_extension_declaration elaborates the ancestor_subtype_indication, and creates a partial view of a type. 17 Dynamic Semantics NOTES 5 The partial view of a type as declared by a private_type_declaration is defined to be a composite view (in 3.2). The full view of the type might or might not be composite. A private extension is also composite, as is its full view. 6 Declaring a private type with an unknown_discriminant_part is a way of preventing clients from creating uninitialized objects of the type; they are then forced to initialize each object by calling some operation declared in the visible part of the package. 7 The ancestor type specified in a private_extension_declaration and the parent type specified in the corresponding declaration of a record extension given in the private part need not be the same. If the ancestor type is not an interface type, the parent type of the full view can be any descendant of the ancestor type. In this case, for a primitive subprogram that is inherited from the ancestor type and not overridden, the formal parameter names and default expressions (if any) come from the corresponding primitive subprogram of the specified ancestor type, while the body comes from the corresponding primitive subprogram of the parent type of the full view. See 3.9.2. the full view 8 If the ancestor type specified in a private_extension_declaration is an interface type, the parent type can be any type so long as in a the ancestor private_extension_declaration and the progenitor types specified in the corresponding declaration of a record extension given in the private part need not be the same — the only requirement is that the private extension and the record extension be descended from the same set of interfaces. type. The progenitor is a descendant of types specified 18 19/2 20/2 20.1/2 177 13 December 2012 Private Types and Private Extensions 7.3 21 22 23 24 1 2 3/3 4/1 5/1 5.1/3 5.2/3 Ada Reference Manual — 2012 Edition Examples Examples of private type declarations: type Key is private; type File_Name is limited private; Example of a private extension declaration: type List is new Ada.Finalization.Controlled with private; 7.3.1 Private Operations For a type declared in the visible part of a package or generic package, certain operations on the type do not become visible until later in the package — either in the private part or the body. Such private operations are available only inside the declarative region of the package or generic package. Static Semantics The predefined operators that exist for a given type are determined by the classes to which the type belongs. For example, an integer type has a predefined "+" operator. In most cases, the predefined operators of a type are declared immediately after the definition of the type; the exceptions are explained below. Inherited subprograms are also implicitly declared immediately after the definition of the type, except as stated below. For a composite type, the characteristics (see 7.3) of the type are determined in part by the characteristics of its component types. At the place where the composite type is declared, the only characteristics of component types used are those characteristics visible at that place. If later immediately within the declarative region in which the composite type is declared additional characteristics become visible for a component type, then any corresponding characteristics become visible for the composite type. Any additional predefined operators are implicitly declared at that place. If there is no such place, then additional predefined operators are not declared at all, but they still exist. The corresponding rule applies to a type defined by a derived_type_definition, if there is a place immediately within the declarative region in which the type is declared where additional characteristics of its parent type become visible. For example, an array type whose component type is limited private becomes nonlimited if the full view of the component type is nonlimited and visible at some later place immediately within the declarative region in which the array type is declared. In such a case, the predefined "=" operator is implicitly declared at that place, and assignment is allowed after that place. A type is a descendant of the full view of some ancestor of its parent type only if the current view it has of its parent is a descendant of the full view of that ancestor. More generally, at any given place, a type is descended from the same view of an ancestor as that from which the current view of its parent is descended. This view determines what characteristics are inherited from the ancestor, and, for example, whether the type is considered to be a descendant of a record type, or a descendant only through record extensions of a more distant ancestor. It is possible for there to be places where a derived type is visibly a descendant of an ancestor type, but not a descendant of even a partial view of the ancestor type, because the parent of the derived type is not visibly a descendant of the ancestor. In this case, the derived type inherits no characteristics from that ancestor, but nevertheless is within the derivation class of the ancestor for the purposes of type conversion, the "covers" relationship, and matching against a formal derived type. In this case the derived type is considered to be a descendant of an incomplete view of the ancestor. 7.3 Private Types and Private Extensions 13 December 2012 178 Ada Reference Manual — 2012 Edition Inherited primitive subprograms follow a different rule. For a derived_type_definition, each inherited primitive subprogram is implicitly declared at the earliest place, if any, immediately within the declarative region in which the type_declaration occurs, but after the type_declaration, where the corresponding declaration from the parent is visible. If there is no such place, then the inherited subprogram is not declared at all, but it still exists. For a tagged type, it is possible to dispatch to an inherited subprogram that is not declared at all. For a private_extension_declaration, each inherited subprogram is declared immediately after the private_extension_declaration if the corresponding declaration from the ancestor is visible at that place. Otherwise, the inherited subprogram is not declared for the private extension, though it might be for the full type. The Class attribute is defined for tagged subtypes in 3.9. In addition, for every subtype S of an untagged private type whose full view is tagged, the following attribute is defined: S'Class Denotes the class-wide subtype corresponding to the full view of S. This attribute is allowed only from the beginning of the private part in which the full view is declared, until the declaration of the full view. After the full view, the Class attribute of the full view can be used. NOTES 9 Because a partial view and a full view are two different views of one and the same type, outside of the defining package the characteristics of the type are those defined by the visible part. Within these outside program units the type is just a private type or private extension, and any language rule that applies only to another class of types does not apply. The fact that the full declaration might implement a private type with a type of a particular class (for example, as an array type) is relevant only within the declarative region of the package itself including any child units. The consequences of this actual implementation are, however, valid everywhere. For example: any default initialization of components takes place; the attribute Size provides the size of the full view; finalization is still done for controlled components of the full view; task dependence rules still apply to components that are task objects. 6/3 7 8 9 10 11 10 Partial views provide initialization, membership tests, selected components for the selection of discriminants and inherited components, qualification, and explicit conversion. Nonlimited partial views also allow use of assignment_statements. 12/2 11 For a subtype S of a partial view, S'Size is defined (see 13.3). For an object A of a partial view, the attributes A'Size and A'Address are defined (see 13.3). The Position, First_Bit, and Last_Bit attributes are also defined for discriminants and inherited components. Example of a type with private operations: Examples package Key_Manager is type Key is private; Null_Key : constant Key; -- a deferred constant declaration (see 7.4) procedure Get_Key(K : out Key); function "<" (X, Y : Key) return Boolean; private type Key is new Natural; Null_Key : constant Key := Key'First; end Key_Manager; 13 14 15 179 13 December 2012 Private Operations 7.3.1 Ada Reference Manual — 2012 Edition package body Key_Manager is Last_Key : Key := Null_Key; procedure Get_Key(K : out Key) is begin Last_Key := Last_Key + 1; K := Last_Key; end Get_Key; function "<" (X, Y : Key) return Boolean is begin return Natural(X) < Natural(Y); end "<"; end Key_Manager; NOTES 12 Notes on the example: Outside of the package Key_Manager, the operations available for objects of type Key include assignment, the comparison for equality or inequality, the procedure Get_Key and the operator "<"; they do not include other relational operators such as ">=", or arithmetic operators. The explicitly declared operator "<" hides the predefined operator "<" implicitly declared by the full_type_declaration. Within the body of the function, an explicit conversion of X and Y to the subtype Natural is necessary to invoke the "<" operator of the parent type. Alternatively, the result of the function could be written as not (X >= Y), since the operator ">=" is not redefined. The value of the variable Last_Key, declared in the package body, remains unchanged between calls of the procedure Get_Key. (See also the NOTES of 7.2.) 16 17 18 19 20 7.3.2 Type Invariants 1/3 For a private type or private extension, the following language-defined aspects may be specified with an aspect_specification (see 13.1.1): 2/3 Type_Invariant This aspect shall be specified by an expression, called an invariant expression. Type_Invariant may be specified on a private_type_declaration, on a private_extension_- declaration, or on a full_type_declaration that declares the completion of a private type or private extension. 3/3 Type_Invariant'Class This aspect shall be specified by an expression, called an invariant expression. Type_Invariant'Class may be specified on a private_type_declaration or a private_- extension_declaration. 4/3 5/3 The expected type for an invariant expression is any boolean type. Name Resolution Rules Within an invariant expression, the identifier of the first subtype of the associated type denotes the current instance of the type. Within an invariant expression associated with type T, the type of the current instance is T for the Type_Invariant aspect and T'Class for the Type_Invariant'Class aspect. 6/3 The Type_Invariant'Class aspect shall not be specified for an untagged type. The Type_Invariant aspect shall not be specified for an abstract type. Legality Rules 7/3 8/3 If the Type_Invariant aspect is specified for a type T, then the invariant expression applies to T. If the Type_Invariant'Class aspect is specified for a tagged type T, then the invariant expression applies to all descendants of T. Static Semantics 7.3.1 Private Operations 13 December 2012 180 Ada Reference Manual — 2012 Edition Dynamic Semantics If one or more invariant expressions apply to a type T, then an invariant check is performed at the following places, on the specified object(s): • After successful default initialization of an object of type T, the check is performed on the new object; • After successful conversion to type T, the check is performed on the result of the conversion; • For a view conversion, outside the immediate scope of T, that converts from a descendant of T (including T itself) to an ancestor of type T (other than T itself), a check is performed on the part of the object that is of type T: • after assigning to the view conversion; and • after successful return from a call that passes the view conversion as an in out or out parameter. • After a successful call on the Read or Input stream attribute of the type T, the check is performed on the object initialized by the stream attribute; • An invariant is checked upon successful return from a call on any subprogram or entry that: • • is declared within the immediate scope of type T (or by an instance of a generic unit, and the generic is declared within the immediate scope of type T), and is visible outside the immediate scope of type T or overrides an operation that is visible outside the immediate scope of T, and • has a result with a part of type T, or one or more parameters with a part of type T, or an access to variable parameter whose designated type has a part of type T. The check is performed on each such part of type T. If performing checks is required by the Invariant or Invariant'Class assertion policies (see 11.4.2) in effect at the point of corresponding aspect specification applicable to a given type, then the respective invariant expression is considered enabled. The invariant check consists of the evaluation of each enabled invariant expression that applies to T, on each of the objects specified above. If any of these evaluate to False, Assertions.Assertion_Error is raised at the point of the object initialization, conversion, or call. If a given call requires more than one evaluation of an invariant expression, either for multiple objects of a single type or for multiple types with invariants, the evaluations are performed in an arbitrary order, and if one of them evaluates to False, it is not specified whether the others are evaluated. Any invariant check is performed prior to copying back any by-copy in out or out parameters. Invariant checks, any postcondition check, and any constraint or predicate checks associated with in out or out parameters are performed in an arbitrary order. 9/3 10/3 11/3 12/3 13/3 14/3 15/3 16/3 17/3 18/3 19/3 20/3 21/3 22/3 The invariant checks performed on a call are determined by the subprogram or entry actually invoked, whether directly, as part of a dispatching call, or as part of a call through an access-to-subprogram value. 23/3 NOTES 13 For a call of a primitive subprogram of type NT that is inherited from type T, the specified checks of the specific invariants of both the types NT and T are performed. For a call of a primitive subprogram of type NT that is overridden for type NT, the specified checks of the specific invariants of only type NT are performed. 24/3 181 13 December 2012 Type Invariants 7.3.2 Ada Reference Manual — 2012 Edition 7.4 Deferred Constants 1 2/3 3 4 5/2 6/3 Deferred constant declarations may be used to declare constants in the visible part of a package, but with the value of the constant given in the private part. They may also be used to declare constants imported from other languages (see Annex B). Legality Rules A deferred constant declaration is an object_declaration with the reserved word constant but no initialization expression. The constant declared by a deferred constant declaration is called a deferred constant. Unless the Import aspect (see B.1) is True for a deferred constant declaration, the deferred constant declaration requires a completion, which shall be a full constant declaration (called the full declaration of the deferred constant). A deferred constant declaration that is completed by a full constant declaration shall occur immediately within the visible part of a package_specification. For this case, the following additional rules apply to the corresponding full declaration: • The full declaration shall occur immediately within the private part of the same package; • The deferred and full constants shall have the same type, or shall have statically matching anonymous access subtypes; • If the deferred constant declaration includes a subtype_indication S that defines a constrained subtype, then the constraint defined by the subtype_indication in the full declaration shall match the constraint defined by S statically. On the other hand, if the subtype of the deferred constant is unconstrained, then the full declaration is still allowed to impose a constraint. The constant itself will be constrained, like all constants; 7/2 • If the deferred constant declaration includes the reserved word aliased, then the full declaration shall also; 7.1/2 • If the subtype of the deferred constant declaration excludes null, the subtype of the full declaration shall also exclude null. 8/3 A deferred constant declaration for which the Import aspect is True need not appear in the visible part of a package_specification, and has no full constant declaration. 9/2 The completion of a deferred constant declaration shall occur before the constant is frozen (see 13.14). 10/3 The elaboration of a deferred constant declaration elaborates the subtype_indication, access_definition, or (only allowed in the case of an imported constant) the array_type_definition. Dynamic Semantics 11 12 13 14/3 NOTES 14 The full constant declaration for a deferred constant that is of a given private type or private extension is not allowed before the corresponding full_type_declaration. This is a consequence of the freezing rules for types (see 13.14). Examples of deferred constant declarations: Examples Null_Key : constant Key; -- see 7.3.1 CPU_Identifier : constant String(1..8) with Import => True, Convention => Assembler, Link_Name => "CPU_ID"; -- see B.1 7.4 Deferred Constants 13 December 2012 182 Ada Reference Manual — 2012 Edition 7.5 Limited Types A limited type is (a view of) a type for which copying (such as for an assignment_statement) is not allowed. A nonlimited type is a (view of a) type for which copying is allowed. 1/2 Legality Rules If a tagged record type has any limited components, then the reserved word limited shall appear in its record_type_definition. a derived_type_definition, its parent type and any progenitor interfaces shall be limited. the definition of reserved word appears limited the in If In the following contexts, an expression of a limited type is not permitted unless it is an aggregate, a function_call, a parenthesized expression or qualified_expression whose operand is permitted by this rule, or a conditional_expression all of whose dependent_expressions are permitted by this rule: the initialization expression of an object_declaration (see 3.3.1) the default_expression of a component_declaration (see 3.8) the expression of a record_component_association (see 4.3.1) the expression for an ancestor_part of an extension_aggregate (see 4.3.2) • • • • • an expression of array_component_association (see 4.3.3) a positional_array_aggregate or the expression of an • • • • the qualified_expression of an initialized allocator (see 4.8) the expression of a return statement (see 6.5) the expression of an expression_function_declaration (see 6.8) the default_expression or actual parameter for a formal object of mode in (see 12.4) A view of a type is limited if it is one of the following: Static Semantics • a type with the reserved word limited, synchronized, task, or protected in its definition; • a class-wide type whose specific type is limited; • a composite type with a limited component; • an incomplete view; • a derived type whose parent is limited and is not an interface. Otherwise, the type is nonlimited. There are no predefined equality operators for a limited type. A type is immutably limited if it is one of the following: • An explicitly limited record type; • A record extension with the reserved word limited; • A nonformal limited private type that is tagged or has at least one access discriminant with a default_expression; • A task type, a protected type, or a synchronized interface; • A type derived from an immutably limited type. 183 13 December 2012 Limited Types 7.5 2/2 2.1/3 2.2/2 2.3/2 2.4/2 2.5/2 2.6/2 2.7/2 2.8/2 2.9/3 2.10/3 3/3 4/2 5/3 6/2 6.1/3 6.2/2 7 8 8.1/3 8.2/3 8.3/3 8.4/3 8.5/3 8.6/3 Ada Reference Manual — 2012 Edition 8.7/3 A descendant of a generic formal limited private type is presumed to be immutably limited except within the body of a generic unit or a body declared within the declarative region of a generic unit, if the formal type is declared within the formal part of the generic unit. 9/3 16 17 18 19 20 21 22 NOTES 15 While it is allowed to write initializations of limited objects, such initializations never copy a limited object. The source of such an assignment operation must be an aggregate or function_call, and such aggregates and function_calls must be built directly in the target object (see 7.6). Paragraphs 10 through 15 were deleted. 16 As illustrated in 7.3.1, an untagged limited type can become nonlimited under certain circumstances. Example of a package with a limited type: Examples package IO_Package is type File_Name is limited private; procedure Open (F : in out File_Name); procedure Close(F : in out File_Name); procedure Read (F : in File_Name; Item : out Integer); procedure Write(F : in File_Name; Item : in Integer); private type File_Name is limited record Internal_Name : Integer := 0; end record; end IO_Package; package body IO_Package is Limit : constant := 200; type File_Descriptor is record ... end record; Directory : array (1 .. Limit) of File_Descriptor; ... procedure Open (F : in out File_Name) is ... end; procedure Close(F : in out File_Name) is ... end; procedure Read (F : in File_Name; Item : out Integer) is ... end; procedure Write(F : in File_Name; Item : in Integer) is ... end; begin ... end IO_Package; NOTES 17 Notes on the example: In the example above, an outside subprogram making use of IO_Package may obtain a file name by calling Open and later use it in calls to Read and Write. Thus, outside the package, a file name obtained from Open acts as a kind of password; its internal properties (such as containing a numeric value) are not known and no other operations (such as addition or comparison of internal names) can be performed on a file name. Most importantly, clients of the package cannot make copies of objects of type File_Name. This example is characteristic of any case where complete control over the operations of a type is desired. Such packages serve a dual purpose. They prevent a user from making use of the internal structure of the type. They also implement the notion of an encapsulated data type where the only operations on the type are those given in the package specification. 23/2 The fact that the full view of File_Name is explicitly declared limited means that parameter passing will always be by reference and function results will always be built directly in the result object (see 6.2 and 6.5). 7.5 Limited Types 13 December 2012 184 Ada Reference Manual — 2012 Edition 7.6 Assignment and Finalization Three kinds of actions are fundamental to the manipulation of objects: initialization, finalization, and assignment. Every object is initialized, either explicitly or by default, after being created (for example, by an object_declaration or allocator). Every object is finalized before being destroyed (for example, by leaving a subprogram_body containing an object_declaration, or by a call to an instance of Unchecked_Deallocation). An assignment operation is used as part of assignment_statements, explicit initialization, parameter passing, and other operations. Default definitions for these three fundamental operations are provided by the language, but a controlled type gives the user additional control over parts of these operations. In particular, the user can define, for a controlled type, an Initialize procedure which is invoked immediately after the normal default initialization of a controlled object, a Finalize procedure which is invoked immediately before finalization of any of the components of a controlled object, and an Adjust procedure which is invoked as the last step of an assignment to a (nonlimited) controlled object. The following language-defined library package exists: Static Semantics package Ada.Finalization is pragma Pure(Finalization); type Controlled is abstract tagged private; pragma Preelaborable_Initialization(Controlled); procedure Initialize (Object : in out Controlled) is null; procedure Adjust (Object : in out Controlled) is null; procedure Finalize (Object : in out Controlled) is null; type Limited_Controlled is abstract tagged limited private; pragma Preelaborable_Initialization(Limited_Controlled); procedure Initialize (Object : in out Limited_Controlled) is null; procedure Finalize (Object : in out Limited_Controlled) is null; private ... -- not specified by the language end Ada.Finalization; A controlled type is a descendant of Controlled or Limited_Controlled. The predefined "=" operator of type Controlled always returns True, since this operator is incorporated into the implementation of the predefined equality operator of types derived from Controlled, as explained in 4.5.2. The type Limited_Controlled is like Controlled, except that it is limited and it lacks the primitive subprogram Adjust. A type is said to need finalization if: • • • • • it is a controlled type, a task type or a protected type; or it has a component whose type needs finalization; or it is a class-wide type; or it is a partial view whose full view needs finalization; or it is one of a number of language-defined types that are explicitly defined to need finalization. 1 2 3 4/3 5/2 6/2 7/2 8/2 9/2 9.1/2 9.2/2 9.3/3 9.4/3 9.5/3 9.6/2 During the elaboration or evaluation of a construct that causes an object to be initialized by default, for every controlled subcomponent of the object that is not assigned an initial value (as defined in 3.3.1), 10/2 Dynamic Semantics 185 13 December 2012 Assignment and Finalization 7.6 Ada Reference Manual — 2012 Edition 11/2 12 13 14 15 16/3 17 Initialize is called on that subcomponent. Similarly, if the object that is initialized by default as a whole is controlled, Initialize is called on the object. For an extension_aggregate whose ancestor_part is a subtype_mark denoting a controlled subtype, the Initialize procedure of the ancestor type is called, unless that Initialize procedure is abstract. Initialize and other initialization operations are done in an arbitrary order, except as follows. Initialize is applied to an object after initialization of its subcomponents, if any (including both implicit initialization and Initialize calls). If an object has a component with an access discriminant constrained by a per-object expression, Initialize is applied to this component after any components that do not have such discriminants. For an object with several components with such a discriminant, Initialize is applied to them in order of their component_declarations. For an allocator, any task activations follow all calls on Initialize. When a target object with any controlled parts is assigned a value, either when created or in a subsequent assignment_statement, the assignment operation proceeds as follows: • The value of the target becomes the assigned value. • The value of the target is adjusted. To adjust the value of a composite object, the values of the components of the object are first adjusted in an arbitrary order, and then, if the object is nonlimited controlled, Adjust is called. Adjusting the value of an elementary object has no effect, nor does adjusting the value of a composite object with no controlled parts. For an assignment_statement, after the name and expression have been evaluated, and any conversion (including constraint checking) has been done, an anonymous object is created, and the value is assigned into it; that is, the assignment operation is applied. (Assignment includes value adjustment.) The target of the assignment_statement is then finalized. The value of the anonymous object is then assigned into the target of the assignment_statement. Finally, the anonymous object is finalized. As explained below, the implementation may eliminate the intermediate anonymous object, so this description subsumes the one given in 5.2, “Assignment Statements”. 17.1/3 When a function call or aggregate is used to initialize an object, the result of the function call or aggregate is an anonymous object, which is assigned into the newly-created object. For such an assignment, the anonymous object might be built in place, in which case the assignment does not involve any copying. Under certain circumstances, the anonymous object is required to be built in place. In particular: 17.2/3 • If the full type of any part of the object is immutably limited, the anonymous object is built in place. 17.3/3 • In the case of an aggregate, if the full type of any part of the newly-created object is controlled, the anonymous object is built in place. 17.4/3 • In other cases, it is unspecified whether the anonymous object is built in place. 17.5/3 Notwithstanding what this International Standard says elsewhere, if an object is built in place: 17.6/3 • Upon successful completion of the return statement or aggregate, the anonymous object mutates into the newly-created object; that is, the anonymous object ceases to exist, and the newly- created object appears in its place. 17.7/3 17.8/3 • Finalization is not performed on the anonymous object. • Adjustment is not performed on the newly-created object. 7.6 Assignment and Finalization 13 December 2012 186 Ada Reference Manual — 2012 Edition • All access values that designate parts of the anonymous object now designate the corresponding 17.9/3 parts of the newly-created object. • All renamings of parts of the anonymous object now denote views of the corresponding parts of 17.10/3 the newly-created object. • Coextensions of the anonymous object become coextensions of the newly-created object. 17.11/3 An implementation is allowed to relax the above rules for assignment_statements in the following ways: 18/3 Implementation Permissions • If an object is assigned the value of that same object, the implementation need not do anything. • For assignment of a noncontrolled type, the implementation may finalize and assign each component of the variable separately (rather than finalizing the entire variable and assigning the entire new value) unless a discriminant of the variable is changed by the assignment. • The implementation need not create an anonymous object if the value being assigned is the result of evaluating a name denoting an object (the source object) whose storage cannot overlap with the target. If the source object might overlap with the target object, then the implementation can avoid the need for an intermediary anonymous object by exercising one of the above permissions and perform the assignment one component at a time (for an overlapping array assignment), or not at all (for an assignment where the target and the source of the assignment are the same object). Furthermore, an implementation is permitted to omit implicit Initialize, Adjust, and Finalize calls and associated assignment operations on an object of a nonlimited controlled type provided that: • any omitted Initialize call is not a call on a user-defined Initialize procedure, and • any usage of the value of the object after the implicit Initialize or Adjust call and before any subsequent Finalize call on the object does not change the external effect of the program, and • after the omission of such calls and operations, any execution of the program that executes an Initialize or Adjust call on an object or initializes an object by an aggregate will also later execute a Finalize call on the object and will always do so prior to assigning a new value to the object, and • the assignment operations associated with omitted Adjust calls are also omitted. This permission applies to Adjust and Finalize calls even if the implicit calls have additional external effects. 7.6.1 Completion and Finalization This subclause defines completion and leaving of the execution of constructs and entities. A master is the execution of a construct that includes finalization of local objects after it is complete (and after waiting for any local tasks — see 9.3), but before leaving. Other constructs and entities are left immediately upon completion. Dynamic Semantics The execution of a construct or entity is complete when the end of that execution has been reached, or when a transfer of control (see 5.1) causes it to be abandoned. Completion due to reaching the end of execution, or due to the transfer of control of an exit_statement, return statement, goto_statement, or requeue_statement or of the selection of a terminate_alternative is normal completion. Completion is abnormal otherwise — when control is transferred out of a construct due to abort or the raising of an exception. 19/3 20/3 21/3 22/2 23/2 24/2 25/2 26/2 27/2 1 2/2 187 13 December 2012 Assignment and Finalization 7.6 Ada Reference Manual — 2012 Edition 3/2 4 5 6/3 7/3 8/3 9/3 After execution of a construct or entity is complete, it is left, meaning that execution continues with the next action, as defined for the execution that is taking place. Leaving an execution happens immediately after its completion, except in the case of a master: the execution of a body other than a package_body; the execution of a statement; or the evaluation of an expression, function_call, or range that is not part of an enclosing expression, function_call, range, or simple_statement other than a simple_return_- statement. A master is finalized after it is complete, and before it is left. For the finalization of a master, dependent tasks are first awaited, as explained in 9.3. Then each object whose accessibility level is the same as that of the master is finalized if the object was successfully initialized and still exists. These actions are performed whether the master is left by reaching the last statement or via a transfer of control. When a transfer of control causes completion of an execution, each included master is finalized in order, from innermost outward. For the finalization of an object: • If the full type of the object is an elementary type, finalization has no effect; • If the full type of the object is a tagged type, and the tag of the object identifies a controlled type, the Finalize procedure of that controlled type is called; • If the full type of the object is a protected type, or if the full type of the object is a tagged type and the tag of the object identifies a protected type, the actions defined in 9.4 are performed; • If the full type of the object is a composite type, then after performing the above actions, if any, every component of the object is finalized in an arbitrary order, except as follows: if the object has a component with an access discriminant constrained by a per-object expression, this component is finalized before any components that do not have such discriminants; for an object with several components with such a discriminant, they are finalized in the reverse of the order of their component_declarations; 9.1/2 • If the object has coextensions (see 3.10.2), each coextension is finalized after the object whose access discriminant designates it. 10 11/3 11.1/3 11.2/3 11.3/3 11.4/3 11.5/3 Immediately before an instance of Unchecked_Deallocation reclaims the storage of an object, the object is finalized. If an instance of Unchecked_Deallocation is never applied to an object created by an allocator, the object will still exist when the corresponding master completes, and it will be finalized then. The finalization of a master performs finalization of objects created by declarations in the master in the reverse order of their creation. After the finalization of a master is complete, the objects finalized as part of its finalization cease to exist, as do any types and subtypes defined and created within the master. Each nonderived access type T has an associated collection, which is the set of objects created by allocators of T, or of types derived from T. Unchecked_Deallocation removes an object from its collection. Finalization of a collection consists of finalization of each object in the collection, in an arbitrary order. The collection of an access type is an object implicitly declared at the following place: • For a named access type, the first freezing point (see 13.14) of the type. • For the type of an access parameter, the call that contains the allocator. • For the type of an access result, within the master of the call (see 3.10.2). • For any other anonymous access type, the first freezing point of the innermost enclosing declaration. 12/2 The target of an assignment_statement is finalized before copying in the new value, as explained in 7.6. 13/3 The master of an object is the master enclosing its creation whose accessibility level (see 3.10.2) is equal to that of the object, except in the case of an anonymous object representing the result of an aggregate or 7.6.1 Completion and Finalization 13 December 2012 188 Ada Reference Manual — 2012 Edition function call. If such an anonymous object is part of the result of evaluating the actual parameter expression for an explicitly aliased parameter of a function call, the master of the object is the innermost master enclosing the evaluation of the aggregate or function call, excluding the aggregate or function call itself. Otherwise, the master of such an anonymous object is the innermost master enclosing the evaluation of the aggregate or function call, which may be the aggregate or function call itself. In the case of an expression that is a master, finalization of any (anonymous) objects occurs after completing evaluation of the expression and all use of the objects, prior to starting the execution of any subsequent construct. 13.1/3 Bounded (Run-Time) Errors It is a bounded error for a call on Finalize or Adjust that occurs as part of object finalization or assignment to propagate an exception. The possible consequences depend on what action invoked the Finalize or Adjust operation: • For a Finalize invoked as part of an assignment_statement, Program_Error is raised at that point. • For an Adjust invoked as part of assignment operations other than those invoked as part of an assignment_statement, other adjustments due to be performed might or might not be performed, and then Program_Error is raised. During its propagation, finalization might or might not be applied to objects whose Adjust failed. For an Adjust invoked as part of an assignment_statement, any other adjustments due to be performed are performed, and then Program_Error is raised. 14/1 15 16/2 • For a Finalize invoked as part of a call on an instance of Unchecked_Deallocation, any other 17 finalizations due to be performed are performed, and then Program_Error is raised. • This paragraph was deleted. • For a Finalize invoked due to reaching the end of the execution of a master, any other finalizations associated with the master are performed, and Program_Error is raised immediately after leaving the master. • For a Finalize invoked by the transfer of control of an exit_statement, return statement, goto_statement, or requeue_statement, Program_Error is raised no earlier than after the finalization of the master being finalized when the exception occurred, and no later than the point where normal execution would have continued. Any other finalizations due to be performed up to that point are performed before raising Program_Error. • For a Finalize invoked by a transfer of control that is due to raising an exception, any other finalizations due to be performed for the same master are performed; Program_Error is raised immediately after leaving the master. • For a Finalize invoked by a transfer of control due to an abort or selection of a terminate alternative, the exception is ignored; any other finalizations due to be performed are performed. Implementation Permissions If the execution of an allocator propagates an exception, any parts of the allocated object that were successfully initialized may be finalized as part of the finalization of the innermost master enclosing the allocator. The implementation may finalize objects created by allocators for an access type whose storage pool supports subpools (see 13.11.4) as if the objects were created (in an arbitrary order) at the point where the storage pool was elaborated instead of at the first freezing point of the access type. 17.1/3 17.2/1 18/2 19 20 20.1/3 20.2/3 189 13 December 2012 Completion and Finalization 7.6.1 Ada Reference Manual — 2012 Edition 21/3 22 23 24 NOTES 18 The rules of Clause 10 imply that immediately prior to partition termination, Finalize operations are applied to library- level controlled objects (including those created by allocators of library-level access types, except those already finalized). This occurs after waiting for library-level tasks to terminate. 19 A constant is only constant between its initialization and finalization. Both initialization and finalization are allowed to change the value of a constant. 20 Abort is deferred during certain operations related to controlled types, as explained in 9.8. Those rules prevent an abort from causing a controlled object to be left in an ill-defined state. 21 The Finalize procedure is called upon finalization of a controlled object, even if Finalize was called earlier, either explicitly or as part of an assignment; hence, if a controlled type is visibly controlled (implying that its Finalize primitive is directly callable), or is nonlimited (implying that assignment is allowed), its Finalize procedure should be designed to have no ill effect if it is applied a second time to the same object. 7.6.1 Completion and Finalization 13 December 2012 190 Ada Reference Manual — 2012 Edition 8 Visibility Rules The rules defining the scope of declarations and the rules defining which identifiers, character_literals, and operator_symbols are visible at (or from) various places in the text of the program are described in this clause. The formulation of these rules uses the notion of a declarative region. As explained in Clause 3, a declaration declares a view of an entity and associates a defining name with that view. The view comprises an identification of the viewed entity, and possibly additional properties. A usage name denotes a declaration. It also denotes the view declared by that declaration, and denotes the entity of that view. Thus, two different usage names might denote two different views of the same entity; in this case they denote the same entity. 8.1 Declarative Region For each of the following constructs, there is a portion of the program text called its declarative region, within which nested declarations can occur: • any declaration, other than that of an enumeration type, that is not a completion of a previous Static Semantics declaration; • a block_statement; • a loop_statement; • a quantified_expression; • an extended_return_statement; • an accept_statement; • an exception_handler. The declarative region includes the text of the construct together with additional text determined (recursively), as follows: • If a declaration is included, so is its completion, if any. • If the declaration of a library unit (including Standard — see 10.1.1) is included, so are the declarations of any child units (and their completions, by the previous rule). The child declarations occur after the declaration. • If a body_stub is included, so is the corresponding subunit. • If a type_declaration is included, then so is a corresponding record_representation_clause, if any. The declarative region of a declaration is also called the declarative region of any view or entity declared by the declaration. A declaration occurs immediately within a declarative region if this region is the innermost declarative region that encloses the declaration (the immediately enclosing declarative region), not counting the declarative region (if any) associated with the declaration itself. A declaration is local to a declarative region if the declaration occurs immediately within the declarative region. An entity is local to a declarative region if the entity is declared by a declaration that is local to the declarative region. 191 13 December 2012 Visibility Rules 8 1/3 2/3 1 2 3 4 4.1/3 4.2/3 5 6 7 8 9 10 11 12 13 14 Ada Reference Manual — 2012 Edition 15 16 17 18 1 2 3 4 5 6 7 8 9 A declaration is global to a declarative region if the declaration occurs immediately within another declarative region that encloses the declarative region. An entity is global to a declarative region if the entity is declared by a declaration that is global to the declarative region. NOTES 1 The children of a parent library unit are inside the parent's declarative region, even though they do not occur inside the parent's declaration or body. This implies that one can use (for example) "P.Q" to refer to a child of P whose defining name is Q, and that after "use P;" Q can refer (directly) to that child. 2 As explained above and in 10.1.1, “Compilation Units - Library Units”, all library units are descendants of Standard, and so are contained in the declarative region of Standard. They are not inside the declaration or body of Standard, but they are inside its declarative region. 3 For a declarative region that comes in multiple parts, the text of the declarative region does not contain any text that might appear between the parts. Thus, when a portion of a declarative region is said to extend from one place to another in the declarative region, the portion does not contain any text that might appear between the parts of the declarative region. 8.2 Scope of Declarations For each declaration, the language rules define a certain portion of the program text called the scope of the declaration. The scope of a declaration is also called the scope of any view or entity declared by the declaration. Within the scope of an entity, and only there, there are places where it is legal to refer to the declared entity. These places are defined by the rules of visibility and overloading. Static Semantics The immediate scope of a declaration is a portion of the declarative region immediately enclosing the declaration. The immediate scope starts at the beginning of the declaration, except in the case of an overloadable declaration, in which case the immediate scope starts just after the place where the profile of the callable entity is determined (which is at the end of the _specification for the callable entity, or at the end of the generic_instantiation if an instance). The immediate scope extends to the end of the declarative region, with the following exceptions: • The immediate scope of a library_item includes only its semantic dependents. • The immediate scope of a declaration in the private part of a library unit does not include the visible part of any public descendant of that library unit. The visible part of (a view of) an entity is a portion of the text of its declaration containing declarations that are visible from outside. The private part of (a view of) an entity that has a visible part contains all declarations within the declaration of (the view of) the entity, except those in the visible part; these are not visible from outside. Visible and private parts are defined only for these kinds of entities: callable entities, other program units, and composite types. • The visible part of a view of a callable entity is its profile. • The visible part of a composite type other than a task or protected type consists of the declarations of all components declared (explicitly or implicitly) within the type_declaration. • The visible part of a generic unit includes the generic_formal_part. For a generic package, it also includes the first list of basic_declarative_items of the package_specification. For a generic subprogram, it also includes the profile. • The visible part of a package, task unit, or protected unit consists of declarations in the program unit's declaration other than those following the reserved word private, if any; see 7.1 and 12.7 for packages, 9.1 for task units, and 9.4 for protected units. 8.1 Declarative Region 13 December 2012 192 Ada Reference Manual — 2012 Edition The scope of a declaration always contains the immediate scope of the declaration. In addition, for a given declaration that occurs immediately within the visible part of an outer declaration, or is a public child of an outer declaration, the scope of the given declaration extends to the end of the scope of the outer declaration, except that the scope of a library_item includes only its semantic dependents. 10 The scope of an attribute_definition_clause is identical to the scope of a declaration that would occur at the point of the attribute_definition_clause. The scope of an aspect_specification is identical to the scope of the associated declaration. 10.1/3 The immediate scope of a declaration is also the immediate scope of the entity or view declared by the declaration. Similarly, the scope of a declaration is also the scope of the entity or view declared by the declaration. 11 NOTES 4 There are notations for denoting visible declarations that are not directly visible. For example, parameter_- specifications are in the visible part of a subprogram_declaration so that they can be used in named-notation calls appearing outside the called subprogram. For another example, declarations of the visible part of a package can be denoted by expanded names appearing outside the package, and can be made directly visible by a use_clause. 12/3 8.3 Visibility The visibility rules, given below, determine which declarations are visible and directly visible at each place within a program. The visibility rules apply to both explicit and implicit declarations. Static Semantics A declaration is defined to be directly visible at places where a name consisting of only an identifier or operator_symbol is sufficient to denote the declaration; that is, no selected_component notation or special context (such as preceding => in a named association) is necessary to denote the declaration. A declaration is defined to be visible wherever it is directly visible, as well as at other places where some name (such as a selected_component) can denote the declaration. The syntactic category direct_name is used to indicate contexts where direct visibility is required. The syntactic category selector_name is used to indicate contexts where visibility, but not direct visibility, is required. There are two kinds of direct visibility: immediate visibility and use-visibility. A declaration is immediately visible at a place if it is directly visible because the place is within its immediate scope. A declaration is use-visible if it is directly visible because of a use_clause (see 8.4). Both conditions can apply. A declaration can be hidden, either from direct visibility, or from all visibility, within certain parts of its scope. Where hidden from all visibility, it is not visible at all (neither using a direct_name nor a selector_name). Where hidden from direct visibility, only direct visibility is lost; visibility using a selector_name is still possible. Two or more declarations are overloaded if they all have the same defining name and there is a place where they are all directly visible. The declarations of callable entities (including enumeration literals) are overloadable, meaning that overloading is allowed for them. Two declarations are homographs if they have the same defining name, and, if both are overloadable, their profiles are type conformant. An inner declaration hides any outer homograph from direct visibility. 1 2 3 4 5 6 7 8 193 13 December 2012 Scope of Declarations 8.2 Ada Reference Manual — 2012 Edition 9/1 Two homographs are not generally allowed immediately within the same declarative region unless one overrides the other (see Legality Rules below). The only declarations that are overridable are the implicit declarations for predefined operators and inherited primitive subprograms. A declaration overrides another homograph that occurs immediately within the same declarative region in the following cases: 10/1 • A declaration that is not overridable overrides one that is overridable, regardless of which declaration occurs first; 11 12 • The implicit declaration of an inherited operator overrides that of a predefined operator; • An implicit declaration of an inherited subprogram overrides a previous implicit declaration of 12.1/2 12.2/2 12.3/2 13 14 15 16 17 18/3 18.1/2 19 an inherited subprogram. • If two or more homographs are implicitly declared at the same place: • If at least one is a subprogram that is neither a null procedure nor an abstract subprogram, and does not require overriding (see 3.9.3), then they override those that are null procedures, abstract subprograms, or require overriding. If more than one such homograph remains that is not thus overridden, then they are all hidden from all visibility. • Otherwise (all are null procedures, abstract subprograms, or require overriding), then any null procedure overrides all abstract subprograms and all subprograms that require overriding; if more than one such homograph remains that is not thus overridden, then if they are all fully conformant with one another, one is chosen arbitrarily; if not, they are all hidden from all visibility. • For an implicit declaration of a primitive subprogram in a generic unit, there is a copy of this declaration in an instance. However, a whole new set of primitive subprograms is implicitly declared for each type declared within the visible part of the instance. These new declarations occur immediately after the type declaration, and override the copied ones. The copied ones can be called only from within the instance; the new ones can be called only from outside the instance, although for tagged types, the body of a new one can be executed by a call to an old one. A declaration is visible within its scope, except where hidden from all visibility, as follows: • An overridden declaration is hidden from all visibility within the scope of the overriding declaration. • A declaration is hidden from all visibility until the end of the declaration, except: • For a record type or record extension, the declaration is hidden from all visibility only until the reserved word record; • For a package_declaration, generic_package_declaration, subprogram_body, or expression_function_declaration, the declaration is hidden from all visibility only until the reserved word is of the declaration; • For a task declaration or protected declaration, the declaration is hidden from all visibility only until the reserved word with of the declaration if there is one, or the reserved word is of the declaration if there is no with. • If the completion of a declaration is a declaration, then within the scope of the completion, the first declaration is hidden from all visibility. Similarly, a discriminant_specification or parameter_specification is hidden within the scope of a corresponding discriminant_- specification or parameter_specification of a corresponding completion, or of a corresponding accept_statement. 20/2 • The declaration of a library unit (including a library_unit_renaming_declaration) is hidden from all visibility at places outside its declarative region that are not within the scope of a nonlimited_with_clause that mentions it. The limited view of a library package is hidden from 8.3 Visibility 13 December 2012 194 Ada Reference Manual — 2012 Edition all visibility at places that are not within the scope of a limited_with_clause that mentions it; in addition, the limited view is hidden from all visibility within the declarative region of the package, as well as within the scope of any nonlimited_with_clause that mentions the package. Where the declaration of the limited view of a package is visible, any name that denotes the package denotes the limited view, including those provided by a package renaming. • For each declaration or renaming of a generic unit as a child of some parent generic package, there is a corresponding declaration nested immediately within each instance of the parent. Such a nested declaration is hidden from all visibility except at places that are within the scope of a with_clause that mentions the child. A declaration with a defining_identifier or defining_operator_symbol is immediately visible (and hence directly visible) within its immediate scope except where hidden from direct visibility, as follows: • A declaration is hidden from direct visibility within the immediate scope of a homograph of the declaration, if the homograph occurs within an inner declarative region; • A declaration is also hidden from direct visibility where hidden from all visibility. 20.1/2 21 22 23 An attribute_definition_clause or an aspect_specification is visible everywhere within its scope. 23.1/3 Name Resolution Rules A direct_name shall resolve to denote a directly visible declaration whose defining name is the same as the direct_name. A selector_name shall resolve to denote a visible declaration whose defining name is the same as the selector_name. These rules on visibility and direct visibility do not apply in a context_clause, a parent_unit_name, or a pragma that appears at the place of a compilation_unit. For those contexts, see the rules in 10.1.6, “Environment-Level Visibility Rules”. Legality Rules A nonoverridable declaration is illegal if there is a homograph occurring immediately within the same declarative region that is visible at the place of the declaration, and is not hidden from all visibility by the nonoverridable declaration. In addition, a type extension is illegal if somewhere within its immediate scope it has two visible components with the same name. Similarly, the context_clause for a compilation unit is illegal if it mentions (in a with_clause) some library unit, and there is a homograph of the library unit that is visible at the place of the compilation unit, and the homograph and the mentioned library unit are both declared immediately within the same declarative region. These rules also apply to dispatching operations declared in the visible part of an instance of a generic unit. However, they do not apply to other overloadable declarations in an instance; such declarations may have type conformant profiles in the instance, so long as the corresponding declarations in the generic were not type conformant. NOTES 5 Visibility for compilation units follows from the definition of the environment in 10.1.4, except that it is necessary to apply a with_clause to obtain visibility to a library_unit_declaration or library_unit_renaming_declaration. 6 In addition to the visibility rules given above, the meaning of the occurrence of a direct_name or selector_name at a given place in the text can depend on the overloading rules (see 8.6). 7 Not all contexts where an identifier, character_literal, or operator_symbol are allowed require visibility of a corresponding declaration. Contexts where visibility is not required are identified by using one of these three syntactic categories directly in a syntax rule, rather than using direct_name or selector_name. 24 25 26/2 27 28 29 195 13 December 2012 Visibility 8.3 Ada Reference Manual — 2012 Edition 8.3.1 Overriding Indicators 1/2 An overriding_indicator is used to declare that an operation is intended to override (or not override) an inherited operation. 2/2 3/3 4/2 5/2 6/2 7/2 8/2 9/2 10/2 11/2 12/2 13/2 14/2 15/2 16/2 overriding_indicator ::= [not] overriding Syntax Legality Rules If an abstract_subprogram_declaration, null_procedure_declaration, expression_function_declaration, subprogram_body, subprogram_body_stub, subprogram_renaming_declaration, generic_instantiation of a subprogram, or subprogram_declaration other than a protected subprogram has an overriding_- indicator, then: • • • the operation shall be a primitive operation for some type; if the overriding_indicator is overriding, then the operation shall override a homograph at the place of the declaration or body; if the overriding_indicator is not overriding, then the operation shall not override any homograph (at any place). In addition to the places where Legality Rules normally apply, these rules also apply in the private part of an instance of a generic unit. NOTES 8 Rules for overriding_indicators of task and protected entries and of protected subprograms are found in 9.5.2 and 9.4, respectively. Examples The use of overriding_indicators allows the detection of errors at compile-time that otherwise might not be detected at all. For instance, we might declare a security queue derived from the Queue interface of 3.9.4 as: type Security_Queue is new Queue with record ...; overriding procedure Append(Q : in out Security_Queue; Person : in Person_Name); overriding procedure Remove_First(Q : in out Security_Queue; Person : in Person_Name); overriding function Cur_Count(Q : in Security_Queue) return Natural; overriding function Max_Count(Q : in Security_Queue) return Natural; not overriding procedure Arrest(Q : in out Security_Queue; Person : in Person_Name); The first four subprogram declarations guarantee that these subprograms will override the four subprograms inherited from the Queue interface. A misspelling in one of these subprograms will be detected by the implementation. Conversely, the declaration of Arrest guarantees that this is a new operation. 8.3.1 Overriding Indicators 13 December 2012 196 Ada Reference Manual — 2012 Edition 8.4 Use Clauses A use_package_clause achieves direct visibility of declarations that appear in the visible part of a package; a use_type_clause achieves direct visibility of the primitive operators of a type. 1 use_clause ::= use_package_clause | use_type_clause use_package_clause ::= use package_name {, package_name}; use_type_clause ::= use [all] type subtype_mark {, subtype_mark}; Syntax A package_name of a use_package_clause shall denote a nonlimited view of a package. Legality Rules Static Semantics For each use_clause, there is a certain region of text called the scope of the use_clause. For a use_clause within a context_clause of a library_unit_declaration or library_unit_renaming_declaration, the scope is the entire declarative region of the declaration. For a use_clause within a context_clause of a body, the scope is the entire body and any subunits (including multiply nested subunits). The scope does not include context_clauses themselves. For a use_clause immediately within a declarative region, the scope is the portion of the declarative region starting just after the use_clause and extending to the end of the declarative region. However, the scope of a use_clause in the private part of a library unit does not include the visible part of any public descendant of that library unit. A package is named in a use_package_clause if it is denoted by a package_name of that clause. A type is named in a use_type_clause if it is determined by a subtype_mark of that clause. For each package named in a use_package_clause whose scope encloses a place, each declaration that occurs immediately within the declarative region of the package is potentially use-visible at this place if the declaration is visible at this place. For each type T or T'Class named in a use_type_clause whose scope encloses a place, the declaration of each primitive operator of type T is potentially use-visible at this place if its declaration is visible at this place. If a use_type_clause whose scope encloses a place includes the reserved word all, then the following entities are also potentially use-visible at this place if the declaration of the entity is visible at this place: 2 3 4/3 5/2 6 7 7.1/2 8/3 • Each primitive subprogram of T including each enumeration literal (if any); • Each subprogram that is declared immediately within the declarative region in which an ancestor 8.1/3 8.2/3 type of T is declared and that operates on a class-wide type that covers T. Certain implicit declarations may become potentially use-visible in certain contexts as described in 12.6. 8.3/3 A declaration is use-visible if it is potentially use-visible, except in these naming-conflict cases: • A potentially use-visible declaration is not use-visible if the place considered is within the immediate scope of a homograph of the declaration. • Potentially use-visible declarations that have the same identifier are not use-visible unless each of them is an overloadable declaration. The elaboration of a use_clause has no effect. Dynamic Semantics 9 10 11 12 197 13 December 2012 Use Clauses 8.4 Ada Reference Manual — 2012 Edition Example of a use clause in a context clause: with Ada.Calendar; use Ada; Examples Example of a use type clause: use type Rational_Numbers.Rational; -- see 7.1 Two_Thirds: Rational_Numbers.Rational := 2/3; 8.5 Renaming Declarations A renaming_declaration declares another name for an entity, such as an object, exception, package, subprogram, entry, or generic unit. Alternatively, a subprogram_renaming_declaration can be the completion of a previous subprogram_declaration. Syntax renaming_declaration ::= object_renaming_declaration | exception_renaming_declaration | package_renaming_declaration | subprogram_renaming_declaration | generic_renaming_declaration The elaboration of a renaming_declaration evaluates the name that follows the reserved word renames and thereby determines the view and entity denoted by this name (the renamed view and renamed entity). A name that denotes the renaming_declaration denotes (a new view of) the renamed entity. Dynamic Semantics NOTES 9 Renaming may be used to resolve name conflicts and to act as a shorthand. Renaming with a different identifier or operator_symbol does not hide the old name; the new name and the old name need not be visible at the same places. 10 A task or protected object that is declared by an explicit object_declaration can be renamed as an object. However, a single task or protected object cannot be renamed since the corresponding type is anonymous (meaning it has no nameable subtypes). For similar reasons, an object of an anonymous array or access type cannot be renamed. 11 A subtype defined without any additional constraint can be used to achieve the effect of renaming another subtype (including a task or protected subtype) as in subtype Mode is Ada.Text_IO.File_Mode; 13 14 15 16 1 2 3 4 5 6 7 8.5.1 Object Renaming Declarations 1 An object_renaming_declaration is used to rename an object. 2/3 object_renaming_declaration ::= defining_identifier : [null_exclusion] subtype_mark renames object_name [aspect_specification]; | defining_identifier : access_definition renames object_name [aspect_specification]; Syntax 3/2 The type of the object_name shall resolve to the type determined by the subtype_mark, or in the case where the type is defined by an access_definition, to an anonymous access type. If the anonymous access Name Resolution Rules 8.4 Use Clauses 13 December 2012 198 Ada Reference Manual — 2012 Edition type is an access-to-object type, the type of the object_name shall have the same designated type as that of the access_definition. If the anonymous access type is an access-to-subprogram type, the type of the object_name shall have a designated profile that is type conformant with that of the access_definition. The renamed entity shall be an object. Legality Rules In the case where the type is defined by an access_definition, the type of the renamed object and the type defined by the access_definition: • shall both be access-to-object types with statically matching designated subtypes and with both or neither being access-to-constant types; or • shall both be access-to-subprogram types with subtype conformant designated profiles. For an object_renaming_declaration with a null_exclusion or an access_definition that has a null_exclusion: • if the object_name denotes a generic formal object of a generic unit G, and the object_renaming_declaration occurs within the body of G or within the body of a generic unit declared within the declarative region of G, then the declaration of the formal object of G shall have a null_exclusion; • otherwise, the subtype of the object_name shall exclude null. In addition to the places where Legality Rules normally apply (see 12.3), this rule applies also in the private part of an instance of a generic unit. The renamed entity shall not be a subcomponent that depends on discriminants of an object whose nominal subtype is unconstrained unless the object is known to be constrained. A slice of an array shall not be renamed if this restriction disallows renaming of the array. In addition to the places where Legality Rules normally apply, these rules apply also in the private part of an instance of a generic unit. Static Semantics An object_renaming_declaration declares a new view of the renamed object whose properties are identical to those of the renamed view. Thus, the properties of the renamed object are not affected by the renaming_declaration. In particular, its value and whether or not it is a constant are unaffected; similarly, the null exclusion or constraints that apply to an object are not affected by renaming (any constraint implied by the subtype_mark or access_definition of the object_renaming_declaration is ignored). Examples Example of renaming an object: declare L : Person renames Leftmost_Person; -- see 3.10.1 begin L.Age := L.Age + 1; end; 4 4.1/2 4.2/2 4.3/2 4.4/2 4.5/2 4.6/2 5/3 6/2 7 8 199 13 December 2012 Object Renaming Declarations 8.5.1 Ada Reference Manual — 2012 Edition 8.5.2 Exception Renaming Declarations 1 An exception_renaming_declaration is used to rename an exception. Syntax exception_renaming_declaration ::= defining_identifier : exception renames exception_name [aspect_specification]; The renamed entity shall be an exception. Legality Rules Static Semantics An exception_renaming_declaration declares a new view of the renamed exception. Example of renaming an exception: Examples EOF : exception renames Ada.IO_Exceptions.End_Error; -- see A.13 2/3 3 4 5 6 8.5.3 Package Renaming Declarations 1 A package_renaming_declaration is used to rename a package. 2/3 package_renaming_declaration ::= package defining_program_unit_name renames package_name [aspect_specification]; Syntax 3 The renamed entity shall be a package. Legality Rules 3.1/2 If the package_name of a package_renaming_declaration denotes a limited view of a package P, then a name that denotes the package_renaming_declaration shall occur only within the immediate scope of the renaming or the scope of a with_clause that mentions the package P or, if P is a nested package, the innermost library package enclosing P. 4 A package_renaming_declaration declares a new view of the renamed package. Static Semantics 4.1/2 At places where the declaration of the limited view of the renamed package is visible, a name that denotes the package_renaming_declaration denotes a limited view of the package (see 10.1.1). 5 6 Example of renaming a package: package TM renames Table_Manager; Examples 8.5.2 Exception Renaming Declarations 13 December 2012 200 Ada Reference Manual — 2012 Edition 8.5.4 Subprogram Renaming Declarations A subprogram_renaming_declaration can serve as the completion of a subprogram_declaration; such a renaming_declaration is called a renaming-as-body. A subprogram_renaming_declaration that is not a completion is called a renaming-as-declaration, and is used to rename a subprogram (possibly an enumeration literal) or an entry. subprogram_renaming_declaration ::= [overriding_indicator] subprogram_specification renames callable_entity_name [aspect_specification]; Syntax Name Resolution Rules 1/3 2/3 The expected profile for the callable_entity_name is the profile given in the subprogram_specification. 3 The profile of a renaming-as-declaration shall be mode conformant, with that of the renamed callable entity. 4/3 Legality Rules For a parameter or result subtype of the subprogram_specification that has an explicit null_exclusion: • if the callable_entity_name denotes a generic formal subprogram of a generic unit G, and the subprogram_renaming_declaration occurs within the body of a generic unit G or within the body of a generic unit declared within the declarative region of the generic unit G, then the corresponding parameter or result subtype of the formal subprogram of G shall have a null_exclusion; • otherwise, the subtype of the corresponding parameter or result type of the renamed callable entity shall exclude null. In addition to the places where Legality Rules normally apply (see 12.3), this rule applies also in the private part of an instance of a generic unit. The profile of a renaming-as-body shall conform fully to that of the declaration it completes. If the renaming-as-body completes that declaration before the subprogram it declares is frozen, the profile shall be mode conformant with that of the renamed callable entity and the subprogram it declares takes its convention from the renamed subprogram; otherwise, the profile shall be subtype conformant with that of the renamed callable entity and the convention of the renamed subprogram shall not be Intrinsic. A renaming-as-body is illegal if the declaration occurs before the subprogram whose declaration it completes is frozen, and the renaming renames the subprogram itself, through one or more subprogram renaming declarations, none of whose subprograms has been frozen. The callable_entity_name of a renaming shall not denote a subprogram that requires overriding (see 3.9.3). The callable_entity_name of a renaming-as-body shall not denote an abstract subprogram. A name that denotes a formal parameter of the subprogram_specification is not allowed within the callable_entity_name. A renaming-as-declaration declares a new view of the renamed entity. The profile of this new view takes its subtypes, parameter modes, and calling convention from the original profile of the callable entity, while Static Semantics 4.1/2 4.2/2 4.3/2 5/3 5.1/2 5.2/2 6 7 201 13 December 2012 Subprogram Renaming Declarations 8.5.4 Ada Reference Manual — 2012 Edition the formal parameter names and default_expressions from taking subprogram_renaming_declaration. The new view is a function or procedure, never an entry. the profile given in the Dynamic Semantics 7.1/1 8/3 For a call to a subprogram whose body is given as a renaming-as-body, the execution of the renaming-as- body is equivalent to the execution of a subprogram_body that simply calls the renamed subprogram with its formal parameters as the actual parameters and, if it is a function, returns the value of the call. For a call on a renaming of a dispatching subprogram that is overridden, if the overriding occurred before the renaming, then the body executed is that of the overriding declaration, even if the overriding declaration is not visible at the place of the renaming; otherwise, the inherited or predefined subprogram is called. A corresponding rule applies to a call on a renaming of a predefined equality operator for an untagged record type. 8.1/1 If a subprogram directly or indirectly renames itself, then it is a bounded error to call that subprogram. Possible consequences are that Program_Error or Storage_Error is raised, or that the call results in infinite recursion. Bounded (Run-Time) Errors NOTES 12 A procedure can only be renamed as a procedure. A function whose defining_designator is either an identifier or an operator_symbol can be renamed with either an identifier or an operator_symbol; for renaming as an operator, the subprogram specification given in the renaming_declaration is subject to the rules given in 6.6 for operator declarations. Enumeration literals can be renamed as functions; similarly, attribute_references that denote functions (such as references to Succ and Pred) can be renamed as functions. An entry can only be renamed as a procedure; the new name is only allowed to appear in contexts that allow a procedure name. An entry of a family can be renamed, but an entry family cannot be renamed as a whole. 13 The operators of the root numeric types cannot be renamed because the types in the profile are anonymous, so the corresponding specifications cannot be written; the same holds for certain attributes, such as Pos. 14 Calls with the new name of a renamed entry are procedure_call_statements and are not allowed at places where the syntax requires an entry_call_statement in conditional_ and timed_entry_calls, nor in an asynchronous_select; similarly, the Count attribute is not available for the new name. 15 The primitiveness of a renaming-as-declaration is determined by its profile, and by where it occurs, as for any declaration of (a view of) a subprogram; primitiveness is not determined by the renamed view. In order to perform a dispatching call, the subprogram name has to denote a primitive subprogram, not a nonprimitive renaming of a primitive subprogram. Examples of subprogram renaming declarations: Examples procedure My_Write(C : in Character) renames Pool(K).Write; -- see 4.1.3 function Real_Plus(Left, Right : Real ) return Real renames "+"; function Int_Plus (Left, Right : Integer) return Integer renames "+"; function Rouge return Color renames Red; -- see 3.5.1 function Rot return Color renames Red; function Rosso return Color renames Rouge; function Next(X : Color) return Color renames Color'Succ; -- see 3.5.1 Example of a subprogram renaming declaration with new parameter names: function "*" (X,Y : Vector) return Real renames Dot_Product; -- see 6.1 Example of a subprogram renaming declaration with a new default expression: function Minimum(L : Link := Head) return Cell renames Min_Cell; -- see 6.1 9 10 11 12 13 14 15 16 17 18 19 20 21 8.5.4 Subprogram Renaming Declarations 13 December 2012 202 Ada Reference Manual — 2012 Edition 8.5.5 Generic Renaming Declarations A generic_renaming_declaration is used to rename a generic unit. Syntax generic_renaming_declaration ::= generic package [aspect_specification]; | generic procedure [aspect_specification]; | generic function [aspect_specification]; defining_program_unit_name renames generic_package_name defining_program_unit_name renames generic_procedure_name defining_program_unit_name renames generic_function_name The renamed entity shall be a generic unit of the corresponding kind. Legality Rules A generic_renaming_declaration declares a new view of the renamed generic unit. Static Semantics NOTES 16 Although the properties of the new view are the same as those of the renamed view, the place where the generic_renaming_declaration occurs may affect the legality of subsequent renamings and instantiations that denote the generic_renaming_declaration, in particular if the renamed generic unit is a library unit (see 10.1.1). Example of renaming a generic unit: Examples generic package Enum_IO renames Ada.Text_IO.Enumeration_IO; -- see A.10.10 1 2/3 3 4 5 6 7 8.6 The Context of Overload Resolution Because declarations can be overloaded, it is possible for an occurrence of a usage name to have more than one possible interpretation; in most cases, ambiguity is disallowed. This subclause describes how the possible interpretations resolve to the actual interpretation. 1/3 Certain rules of the language (the Name Resolution Rules) are considered “overloading rules”. If a possible interpretation violates an overloading rule, it is assumed not to be the intended interpretation; some other possible interpretation is assumed to be the actual interpretation. On the other hand, violations of nonoverloading rules do not affect which interpretation is chosen; instead, they cause the construct to be illegal. To be legal, there usually has to be exactly one acceptable interpretation of a construct that is a “complete context”, not counting any nested complete contexts. The syntax rules of the language and the visibility rules given in 8.3 determine the possible interpretations. Most type checking rules (rules that require a particular type, or a particular class of types, for example) are overloading rules. Various rules for the matching of formal and actual parameters are overloading rules. Overload resolution is applied separately to each complete context, not counting inner complete contexts. Each of the following constructs is a complete context: Name Resolution Rules • A context_item. 2 3 4 5 203 13 December 2012 Generic Renaming Declarations 8.5.5 6 7 8 9 10 11 12 13 14 15 16 17/3 Ada Reference Manual — 2012 Edition • A declarative_item or declaration. • A statement. • A pragma_argument_association. • The expression of a case_statement. An (overall) interpretation of a complete context embodies its meaning, and includes the following information about the constituents of the complete context, not including constituents of inner complete contexts: • for each constituent of the complete context, to which syntactic categories it belongs, and by which syntax rules; and • for each usage name, which declaration it denotes (and, therefore, which view and which entity it denotes); and • for a complete context that is a declarative_item, whether or not it is a completion of a declaration, and (if so) which declaration it completes. A possible interpretation is one that obeys the syntax rules and the visibility rules. An acceptable interpretation is a possible interpretation that obeys the overloading rules, that is, those rules that specify an expected type or expected profile, or specify how a construct shall resolve or be interpreted. The interpretation of a constituent of a complete context is determined from the overall interpretation of the complete context as a whole. Thus, for example, “interpreted as a function_call,” means that the construct's interpretation says that it belongs to the syntactic category function_call. Each occurrence of a usage name denotes the declaration determined by its interpretation. It also denotes the view declared by its denoted declaration, except in the following cases: • If a usage name appears within the declarative region of a type_declaration and denotes that same type_declaration, then it denotes the current instance of the type (rather than the type itself); the current instance of a type is the object or value of the type that is associated with the execution that evaluates the usage name. Similarly, if a usage name appears within the declarative region of a subtype_declaration and denotes that same subtype_declaration, then it denotes the current instance of the subtype. These rules do not apply if the usage name appears within the subtype_mark of an access_definition for an access-to-object type, or within the subtype of a parameter or result of an access-to-subprogram type. 18 • If a usage name appears within the declarative region of a generic_declaration (but not within its generic_formal_part) and it denotes that same generic_declaration, then it denotes the current instance of the generic unit (rather than the generic unit itself). See also 12.3. 19 A usage name that denotes a view also denotes the entity of that view. 20/2 The expected type for a given expression, name, or other construct determines, according to the type resolution rules given below, the types considered for the construct during overload resolution. The type resolution rules provide support for class-wide programming, universal literals, dispatching operations, and anonymous access types: 21 22 23 • If a construct is expected to be of any type in a class of types, or of the universal or class-wide type for a class, then the type of the construct shall resolve to a type in that class or to a universal type that covers the class. • If the expected type for a construct is a specific type T, then the type of the construct shall resolve either to T, or: • to T'Class; or 8.6 The Context of Overload Resolution 13 December 2012 204 Ada Reference Manual — 2012 Edition • to a universal type that covers T; or • when T is a specific anonymous access-to-object type (see 3.10) with designated type D, to an access-to-object type whose designated type is D'Class or is covered by D; or 24 25/2 • when T is a named general access-to-object type (see 3.10) with designated type D, to an 25.1/3 anonymous access-to-object type whose designated type covers or is covered by D; or • when T is an anonymous access-to-subprogram type (see 3.10), to an access-to-subprogram 25.2/3 type whose designated profile is type conformant with that of T. In certain contexts, such as in a subprogram_renaming_declaration, the Name Resolution Rules define an expected profile for a given name; in such cases, the name shall resolve to the name of a callable entity whose profile is type conformant with the expected profile. 26 Legality Rules When a construct is one that requires that its expected type be a single type in a given class, the type of the construct shall be determinable solely from the context in which the construct appears, excluding the construct itself, but using the requirement that it be in the given class. Furthermore, the context shall not be one that expects any type in some class that contains types of the given class; in particular, the construct shall not be the operand of a type_conversion. Other than for the simple_expression of a membership test, if the expected type for a name or expression is not the same as the actual type of the name or expression, the actual type shall be convertible to the expected type (see 4.6); further, if the expected type is a named access-to-object type with designated type D1 and the actual type is an anonymous access-to-object type with designated type D2, then D1 shall cover D2, and the name or expression shall denote a view with an accessibility level for which the statically deeper relationship applies; in particular it shall not denote an access parameter nor a stand-alone access object. A complete context shall have at least one acceptable interpretation; if there is exactly one, then that one is chosen. There is a preference for the primitive operators (and ranges) of the root numeric types root_integer and root_real. In particular, if two acceptable interpretations of a constituent of a complete context differ only in that one is for a primitive operator (or range) of the type root_integer or root_real, and the other is not, the interpretation using the primitive operator (or range) of the root numeric type is preferred. 27/2 27.1/3 28 29 Similarly, there is a preference for the equality operators of the universal_access type (see 4.5.2). If two acceptable interpretations of a constituent of a complete context differ only in that one is for an equality operator of the universal_access type, and the other is not, the interpretation using the equality operator of the universal_access type is preferred. 29.1/3 For a complete context, if there is exactly one overall acceptable interpretation where each constituent's interpretation is the same as or preferred (in the above sense) over those in all other overall acceptable interpretations, then that one overall acceptable interpretation is chosen. Otherwise, the complete context is ambiguous. A complete context other than a pragma_argument_association shall not be ambiguous. A complete context that is a pragma_argument_association is allowed to be ambiguous (unless otherwise specified for the particular pragma), but only if every acceptable interpretation of the pragma argument is as a name that statically denotes a callable entity. Such a name denotes all of the declarations determined by its interpretations, and all of the views declared by these declarations. 30 31 32 205 13 December 2012 The Context of Overload Resolution 8.6 Ada Reference Manual — 2012 Edition 33 34 NOTES 17 If a usage name has only one acceptable interpretation, then it denotes the corresponding entity. However, this does not mean that the usage name is necessarily legal since other requirements exist which are not considered for overload resolution; for example, the fact that an expression is static, whether an object is constant, mode and subtype conformance rules, freezing rules, order of elaboration, and so on. Similarly, subtypes are not considered for overload resolution (the violation of a constraint does not make a program illegal but raises an exception during program execution). 8.6 The Context of Overload Resolution 13 December 2012 206 Ada Reference Manual — 2012 Edition 9 Tasks and Synchronization The execution of an Ada program consists of the execution of one or more tasks. Each task represents a separate thread of control that proceeds independently and concurrently between the points where it interacts with other tasks. The various forms of task interaction are described in this clause, and include: 1/3 the activation and termination of a task; • • a call on a protected subprogram of a protected object, providing exclusive read-write access, or concurrent read-only access to shared data; • a call on an entry, either of another task, allowing for synchronous communication with that task, or of a protected object, allowing for asynchronous communication with one or more other tasks using that same protected object; • a timed operation, including a simple delay statement, a timed entry call or accept, or a timed asynchronous select statement (see next item); • an asynchronous transfer of control as part of an asynchronous select statement, where a task stops what it is doing and begins execution at a different point in response to the completion of an entry call or the expiration of a delay; • an abort statement, allowing one task to cause the termination of another task. In addition, tasks can communicate indirectly by reading and updating (unprotected) shared variables, presuming the access is properly synchronized through some other kind of task interaction. The properties of a task are defined by a corresponding task declaration and task_body, which together define a program unit called a task unit. Static Semantics Dynamic Semantics Over time, tasks proceed through various states. A task is initially inactive; upon activation, and prior to its termination it is either blocked (as part of some task interaction) or ready to run. While ready, a task competes for the available execution resources that it requires to run. NOTES 1 Concurrent task execution may be implemented on multicomputers, multiprocessors, or with interleaved execution on a single physical processor. On the other hand, whenever an implementation can determine that the required semantic effects can be achieved when parts of the execution of a given task are performed by different physical processors acting in parallel, it may choose to perform them in this way. 9.1 Task Units and Task Objects A task unit is declared by a task declaration, which has a corresponding task_body. A task declaration may be a task_type_declaration, in which case it declares a named task type; alternatively, it may be a single_task_declaration, in which case it defines an anonymous task type, as well as declaring a named task object of that type. 2 3 4 5 6 7 8 9 10 11 1 207 13 December 2012 Tasks and Synchronization 9 Ada Reference Manual — 2012 Edition Syntax task_type_declaration ::= task type defining_identifier [known_discriminant_part] [aspect_specification] [is [new interface_list with] task_definition]; single_task_declaration ::= task defining_identifier [aspect_specification][is [new interface_list with] task_definition]; task_definition ::= {task_item} [ private {task_item}] end [task_identifier] task_item ::= entry_declaration | aspect_clause task_body ::= task body defining_identifier [aspect_specification] is declarative_part begin handled_sequence_of_statements end [task_identifier]; If a task_identifier appears at the end of a task_definition or task_body, it shall repeat the defining_identifier. Paragraph 8 was deleted. A task_definition defines a task type and its first subtype. The first list of task_items of a task_definition, together with the known_discriminant_part, if any, is called the visible part of the task unit. The optional list of task_items after the reserved word private is called the private part of the task unit. Static Semantics 2/3 3/3 4 5/1 6/3 7 9 9.1/1 For a task declaration without a task_definition, a task_definition without task_items is assumed. 9.2/3 9.3/2 9.4/2 For a task declaration with an interface_list, the task type inherits user-defined primitive subprograms from each progenitor type (see 3.9.4), in the same way that a derived type inherits user-defined primitive subprograms from its progenitor types (see 3.4). If the first parameter of a primitive inherited subprogram is of the task type or an access parameter designating the task type, and there is an entry_declaration for a single entry with the same identifier within the task declaration, whose profile is type conformant with the prefixed view profile of the inherited subprogram, the inherited subprogram is said to be implemented by the conforming task entry using an implicitly declared nonabstract subprogram which has the same profile as the inherited subprogram and which overrides it. Legality Rules A task declaration requires a completion, which shall be a task_body, and every task_body shall be the completion of some task declaration. Each interface_subtype_mark of an interface_list appearing within a task declaration shall denote a limited interface type that is not a protected interface. 9.1 Task Units and Task Objects 13 December 2012 208 Ada Reference Manual — 2012 Edition The prefixed view profile of an explicitly declared primitive subprogram of a tagged task type shall not be type conformant with any entry of the task type, if the subprogram has the same defining name as the entry and the first parameter of the subprogram is of the task type or is an access parameter designating the task type. For each primitive subprogram inherited by the type declared by a task declaration, at most one of the following shall apply: • • the inherited subprogram is overridden with a primitive subprogram of the task type, in which case the overriding subprogram shall be subtype conformant with the inherited subprogram and not abstract; or the inherited subprogram is implemented by a single entry of the task type; in which case its prefixed view profile shall be subtype conformant with that of the task entry. If neither applies, the inherited subprogram shall be a null procedure. In addition to the places where Legality Rules normally apply (see 12.3), these rules also apply in the private part of an instance of a generic unit. Dynamic Semantics The elaboration of a task declaration elaborates the task_definition. The elaboration of a single_task_- declaration also creates an object of an (anonymous) task type. The elaboration of a task_definition creates the task type and its first subtype; it also includes the elaboration of the entry_declarations in the given order. 9.5/3 9.6/2 9.7/2 9.8/2 9.9/2 10 11 As part of the initialization of a task object, any aspect_clauses and any per-object constraints associated with entry_declarations of the corresponding task_definition are elaborated in the given order. 12/1 The elaboration of a task_body has no effect other than to establish that tasks of the type can from then on be activated without failing the Elaboration_Check. The execution of a task_body is invoked by the activation of a task of the corresponding type (see 9.2). The content of a task object of a given task type includes: • The values of the discriminants of the task object, if any; • An entry queue for each entry of the task object; • A representation of the state of the associated task. NOTES 2 Other than in an access_definition, the name of a task unit within the declaration or body of the task unit denotes the current instance of the unit (see 8.6), rather than the first subtype of the corresponding task type (and thus the name cannot be used as a subtype_mark). 3 The notation of a selected_component can be used to denote a discriminant of a task (see 4.1.3). Within a task unit, the name of a discriminant of the task type denotes the corresponding discriminant of the current instance of the unit. 4 A task type is a limited type (see 7.5), and hence precludes use of assignment_statements and predefined equality operators. If an application needs to store and exchange task identities, it can do so by defining an access type designating the corresponding task objects and by using access values for identification purposes. Assignment is available for such an access type as for any access type. Alternatively, if the implementation supports the Systems Programming Annex, the Identity attribute can be used for task identification (see C.7.1). 13 14 15 16 17 18 19/2 20 21/2 209 13 December 2012 Task Units and Task Objects 9.1 22 23 24/2 25 26 27 28 29 30 31 32 1 2/2 3/2 Ada Reference Manual — 2012 Edition Examples of declarations of task types: Examples task type Server is entry Next_Work_Item(WI : in Work_Item); entry Shut_Down; end Server; task type Keyboard_Driver(ID : Keyboard_ID := New_ID) is new Serial_Device with -- see 3.9.4 entry Read (C : out Character); entry Write(C : in Character); end Keyboard_Driver; Examples of declarations of single tasks: task Controller is entry Request(Level)(D : Item); -- a family of entries end Controller; task Parser is entry Next_Lexeme(L : in Lexical_Element); entry Next_Action(A : out Parser_Action); end; task User; -- has no entries Examples of task objects: Agent : Server; Teletype : Keyboard_Driver(TTY_ID); Pool : array(1 .. 10) of Keyboard_Driver; Example of access type designating task objects: type Keyboard is access Keyboard_Driver; Terminal : Keyboard := new Keyboard_Driver(Term_ID); 9.2 Task Execution - Task Activation Dynamic Semantics The execution of a task of a given task type consists of the execution of the corresponding task_body. The initial part of this execution is called the activation of the task; it consists of the elaboration of the declarative_part of the task_body. Should an exception be propagated by the elaboration of its declarative_part, the activation of the task is defined to have failed, and it becomes a completed task. A task object (which represents one task) can be a part of a stand-alone object, of an object created by an allocator, or of an anonymous object of a limited type, or a coextension of one of these. All tasks that are part or coextensions of any of the stand-alone objects created by the elaboration of object_declarations (or generic_associations of formal objects of mode in) of a single declarative region are activated together. All tasks that are part or coextensions of a single object that is not a stand-alone object are activated together. For the tasks of a given declarative region, the activations are initiated within the context of the handled_- sequence_of_statements (and its associated exception_handlers if any — see 11.2), just prior to executing the statements of the handled_sequence_of_statements. For a package without an explicit body or an explicit handled_sequence_of_statements, an implicit body or an implicit null_statement is assumed, as defined in 7.2. 9.1 Task Units and Task Objects 13 December 2012 210 Ada Reference Manual — 2012 Edition For tasks that are part or coextensions of a single object that is not a stand-alone object, activations are initiated after completing any initialization of the outermost object enclosing these tasks, prior to performing any other operation on the outermost object. In particular, for tasks that are part or coextensions of the object created by the evaluation of an allocator, the activations are initiated as the last step of evaluating the allocator, prior to returning the new access value. For tasks that are part or coextensions of an object that is the result of a function call, the activations are not initiated until after the function returns. The task that created the new tasks and initiated their activations (the activator) is blocked until all of these activations complete (successfully or not). Once all of these activations are complete, if the activation of any of the tasks has failed (due to the propagation of an exception), Tasking_Error is raised in the activator, at the place at which it initiated the activations. Otherwise, the activator proceeds with its execution normally. Any tasks that are aborted prior to completing their activation are ignored when determining whether to raise Tasking_Error. If the master that directly encloses the point where the activation of a task T would be initiated, completes before the activation of T is initiated, T becomes terminated and is never activated. Furthermore, if a return statement is left such that the return object is not returned to the caller, any task that was created as a part of the return object or one of its coextensions immediately becomes terminated and is never activated. NOTES 5 An entry of a task can be called before the task has been activated. 6 If several tasks are activated together, the execution of any of these tasks need not await the end of the activation of the other tasks. 7 A task can become completed during its activation either because of an exception or because it is aborted (see 9.8). Examples Example of task activation: procedure P is A, B : Server; -- elaborate the task objects A, B C : Server; -- elaborate the task object C begin -- the tasks A, B, C are activated together before the first statement ... end; 9.3 Task Dependence - Termination of Tasks Dynamic Semantics 4/2 5 6/3 7 8 9 10 11 Each task (other than an environment task — see 10.2) depends on one or more masters (see 7.6.1), as follows: • If the task is created by the evaluation of an allocator for a given access type, it depends on each master that includes the elaboration of the declaration of the ultimate ancestor of the given access type. • If the task is created by the elaboration of an object_declaration, it depends on each master that includes this elaboration. • Otherwise, the task depends on the master of the outermost object of which it is a part (as determined by the accessibility level of that object — see 3.10.2 and 7.6.1), as well as on any master whose execution includes that of the master of the outermost object. 1 2 3 3.1/2 211 13 December 2012 Task Execution - Task Activation 9.2 4 5 6/1 7/2 8 9 10 11 12 13 14 15 16 17 18 19 20 Ada Reference Manual — 2012 Edition Furthermore, if a task depends on a given master, it is defined to depend on the task that executes the master, and (recursively) on any master of that task. A task is said to be completed when the execution of its corresponding task_body is completed. A task is said to be terminated when any finalization of the task_body has been performed (see 7.6.1). The first step of finalizing a master (including a task_body) is to wait for the termination of any tasks dependent on the master. The task executing the master is blocked until all the dependents have terminated. Any remaining finalization is then performed and the master is left. Completion of a task (and the corresponding task_body) can occur when the task is blocked at a select_- statement with an open terminate_alternative (see 9.7.1); the open terminate_alternative is selected if and only if the following conditions are satisfied: • The task depends on some completed master; and • Each task that depends on the master considered is either already terminated or similarly blocked at a select_statement with an open terminate_alternative. When both conditions are satisfied, the task considered becomes completed, together with all tasks that depend on the master considered that are not yet completed. NOTES 8 The full view of a limited private type can be a task type, or can have subcomponents of a task type. Creation of an object of such a type creates dependences according to the full type. 9 An object_renaming_declaration defines a new view of an existing entity and hence creates no further dependence. 10 The rules given for the collective completion of a group of tasks all blocked on select_statements with open terminate_alternatives ensure that the collective completion can occur only when there are no remaining active tasks that could call one of the tasks being collectively completed. 11 If two or more tasks are blocked on select_statements with open terminate_alternatives, and become completed collectively, their finalization actions proceed concurrently. 12 The completion of a task can occur due to any of the following: • • • • the raising of an exception during the elaboration of the declarative_part of the corresponding task_body; the completion of the handled_sequence_of_statements of the corresponding task_body; the selection of an open terminate_alternative of a select_statement in the corresponding task_body; the abort of the task. Example of task dependence: Examples declare type Global is access Server; -- see 9.1 A, B : Server; G : Global; begin -- activation of A and B declare type Local is access Server; X : Global := new Server; -- activation of X.all L : Local := new Server; -- activation of L.all C : Server; begin -- activation of C G := X; -- both G and X designate the same task object ... end; -- await termination of C and L.all (but not X.all) ... end; -- await termination of A, B, and G.all 9.3 Task Dependence - Termination of Tasks 13 December 2012 212 Ada Reference Manual — 2012 Edition 9.4 Protected Units and Protected Objects A protected object provides coordinated access to shared data, through calls on its visible protected operations, which can be protected subprograms or protected entries. A protected unit is declared by a protected declaration, which has a corresponding protected_body. A protected declaration may be a protected_type_declaration, in which case it declares a named protected type; alternatively, it may be a single_protected_declaration, in which case it defines an anonymous protected type, as well as declaring a named protected object of that type. Syntax protected_type_declaration ::= protected type defining_identifier [known_discriminant_part] [aspect_specification] is [new interface_list with] protected_definition; single_protected_declaration ::= protected defining_identifier [aspect_specification] is [new interface_list with] protected_definition; protected_definition ::= { protected_operation_declaration } [ private { protected_element_declaration } ] end [protected_identifier] protected_operation_declaration ::= subprogram_declaration | entry_declaration | aspect_clause protected_element_declaration ::= protected_operation_declaration | component_declaration protected_body ::= protected body defining_identifier [aspect_specification] is { protected_operation_item } end [protected_identifier]; protected_operation_item ::= subprogram_declaration | subprogram_body | entry_body | aspect_clause If a protected_identifier appears at the end of a protected_definition or protected_body, it shall repeat the defining_identifier. Paragraph 10 was deleted. 1 2/3 3/3 4 5/1 6 7/3 8/1 9 A protected_definition defines a protected type and its first subtype. The list of protected_operation_- declarations of a protected_definition, together with the known_discriminant_part, if any, is called the 11/2 Static Semantics 213 13 December 2012 Protected Units and Protected Objects 9.4 Ada Reference Manual — 2012 Edition visible part of the protected unit. The optional list of protected_element_declarations after the reserved word private is called the private part of the protected unit. 11.1/3 For a protected declaration with an interface_list, the protected type inherits user-defined primitive subprograms from each progenitor type (see 3.9.4), in the same way that a derived type inherits user- defined primitive subprograms from its progenitor types (see 3.4). If the first parameter of a primitive inherited subprogram is of the protected type or an access parameter designating the protected type, and there is a protected_operation_declaration for a protected subprogram or single entry with the same identifier within the protected declaration, whose profile is type conformant with the prefixed view profile of the inherited subprogram, the inherited subprogram is said to be implemented by the conforming protected subprogram or entry using an implicitly declared nonabstract subprogram which has the same profile as the inherited subprogram and which overrides it. Legality Rules 11.2/2 A protected declaration requires a completion, which shall be a protected_body, and every protected_- body shall be the completion of some protected declaration. 11.3/2 Each interface_subtype_mark of an interface_list appearing within a protected declaration shall denote a limited interface type that is not a task interface. 11.4/3 11.5/2 11.6/2 11.7/2 11.8/2 11.9/3 The prefixed view profile of an explicitly declared primitive subprogram of a tagged protected type shall not be type conformant with any protected operation of the protected type, if the subprogram has the same defining name as the protected operation and the first parameter of the subprogram is of the protected type or is an access parameter designating the protected type. For each primitive subprogram inherited by the type declared by a protected declaration, at most one of the following shall apply: • • the inherited subprogram is overridden with a primitive subprogram of the protected type, in which case the overriding subprogram shall be subtype conformant with the inherited subprogram and not abstract; or the inherited subprogram is implemented by a protected subprogram or single entry of the protected type, in which case its prefixed view profile shall be subtype conformant with that of the protected subprogram or entry. If neither applies, the inherited subprogram shall be a null procedure. In addition to the places where Legality Rules normally apply (see 12.3), these rules also apply in the private part of an instance of a generic unit. If an inherited subprogram is implemented by a protected procedure or an entry, then the first parameter of the inherited subprogram shall be of mode out or in out, or an access-to-variable parameter. If an inherited subprogram is implemented by a protected function, then the first parameter of the inherited subprogram shall be of mode in, but not an access-to-variable parameter. 11.10/2 If a protected subprogram declaration has an overriding_indicator, then at the point of the declaration: 11.11/2 11.12/2 11.13/2 • • if the overriding_indicator is overriding, then the subprogram shall implement an inherited subprogram; if the overriding_indicator is not overriding, then the subprogram shall not implement any inherited subprogram. In addition to the places where Legality Rules normally apply (see 12.3), these rules also apply in the private part of an instance of a generic unit. 9.4 Protected Units and Protected Objects 13 December 2012 214 Ada Reference Manual — 2012 Edition Dynamic Semantics The elaboration of a protected declaration elaborates the protected_definition. The elaboration of a single_protected_declaration also creates an object of an (anonymous) protected type. The elaboration of a protected_definition creates the protected type and its first subtype; it also includes the elaboration of the component_declarations and protected_operation_declarations in the given order. As part of the initialization of a protected object, any per-object constraints (see 3.8) are elaborated. The elaboration of a protected_body has no other effect than to establish that protected operations of the type can from then on be called without failing the Elaboration_Check. The content of an object of a given protected type includes: • The values of the components of the protected object, including (implicitly) an entry queue for each entry declared for the protected object; • A representation of the state of the execution resource associated with the protected object (one such resource is associated with each protected object). The execution resource associated with a protected object has to be acquired to read or update any components of the protected object; it can be acquired (as part of a protected action — see 9.5.1) either for concurrent read-only access, or for exclusive read-write access. As the first step of the finalization of a protected object, each call remaining on any entry queue of the object is removed from its queue and Program_Error is raised at the place of the corresponding entry_- call_statement. 12 13 14 15 16 17 18 19 20 It is a bounded error to call an entry or subprogram of a protected object after that object is finalized. If the error is detected, Program_Error is raised. Otherwise, the call proceeds normally, which may leave a task queued forever. 20.1/2 Bounded (Run-Time) Errors NOTES 13 Within the declaration or body of a protected unit other than in an access_definition, the name of the protected unit denotes the current instance of the unit (see 8.6), rather than the first subtype of the corresponding protected type (and thus the name cannot be used as a subtype_mark). 14 A selected_component can be used to denote a discriminant of a protected object (see 4.1.3). Within a protected unit, the name of a discriminant of the protected type denotes the corresponding discriminant of the current instance of the unit. 15 A protected type is a limited type (see 7.5), and hence precludes use of assignment_statements and predefined equality operators. 16 The bodies of the protected operations given in the protected_body define the actions that take place upon calls to the protected operations. 17 The declarations in the private part are only visible within the private part and the body of the protected unit. Example of declaration of protected type and corresponding body: Examples protected type Resource is entry Seize; procedure Release; private Busy : Boolean := False; end Resource; 21/2 22 23/2 24 25 26 27 215 13 December 2012 Protected Units and Protected Objects 9.4 28 29 30 31 32 33 34 35 1 2/3 3/3 4/3 Ada Reference Manual — 2012 Edition protected body Resource is entry Seize when not Busy is begin Busy := True; end Seize; procedure Release is begin Busy := False; end Release; end Resource; Example of a single protected declaration and corresponding body: protected Shared_Array is -- Index, Item, and Item_Array are global types function Component (N : in Index) return Item; procedure Set_Component(N : in Index; E : in Item); private Table : Item_Array(Index) := (others => Null_Item); end Shared_Array; protected body Shared_Array is function Component(N : in Index) return Item is begin return Table(N); end Component; procedure Set_Component(N : in Index; E : in Item) is begin Table(N) := E; end Set_Component; end Shared_Array; Examples of protected objects: Control : Resource; Flags : array(1 .. 100) of Resource; 9.5 Intertask Communication The primary means for intertask communication is provided by calls on entries and protected subprograms. Calls on protected subprograms allow coordinated access to shared data objects. Entry calls allow for blocking the caller until a given condition is satisfied (namely, that the corresponding entry is open — see 9.5.3), and then communicating data or control information directly with another task or indirectly via a shared protected object. Static Semantics When a name or prefix denotes an entry, protected subprogram, or a prefixed view of a primitive subprogram of a limited interface whose first parameter is a controlling parameter, the name or prefix determines a target object, as follows: • If it is a direct_name or expanded name that denotes the declaration (or body) of the operation, then the target object is implicitly specified to be the current instance of the task or protected unit immediately enclosing the operation; a call using such a name is defined to be an internal call; • If it is a selected_component that is not an expanded name, then the target object is explicitly specified to be the object denoted by the prefix of the name; a call using such a name is defined to be an external call; 9.4 Protected Units and Protected Objects 13 December 2012 216 Ada Reference Manual — 2012 Edition • If the name or prefix is a dereference (implicit or explicit) of an access-to-protected-subprogram value, then the target object is determined by the prefix of the Access attribute_reference that produced the access value originally; a call using such a name is defined to be an external call; • If the name or prefix denotes a subprogram_renaming_declaration, then the target object is as determined by the name of the renamed entity. A call on an entry or a protected subprogram either uses a name or prefix that determines a target object implicitly, as above, or is a call on (a non-prefixed view of) a primitive subprogram of a limited interface whose first parameter is a controlling parameter, in which case the target object is identified explicitly by the first parameter. This latter case is an external call. 5/3 6 6.1/3 A corresponding definition of target object applies to a requeue_statement (see 9.5.4), with a corresponding distinction between an internal requeue and an external requeue. 7 If a name or prefix determines a target object, and the name denotes a protected entry or procedure, then the target object shall be a variable, unless the prefix is for an attribute_reference to the Count attribute (see 9.9). 7.1/3 Legality Rules Dynamic Semantics Within the body of a protected operation, the current instance (see 8.6) of the immediately enclosing protected unit is determined by the target object specified (implicitly or explicitly) in the call (or requeue) on the protected operation. Any call on a protected procedure or entry of a target protected object is defined to be an update to the object, as is a requeue on such an entry. synchronization_kind ::= By_Entry | By_Protected_Procedure | Optional Syntax Static Semantics For the declaration of a primitive procedure of a synchronized tagged type the following language-defined representation aspect may be specified with an aspect_specification (see 13.1.1): Synchronization If specified, the aspect definition shall be a synchronization_kind. Inherited subprograms inherit the Synchronization aspect, if any, from the corresponding subprogram of the parent or progenitor type. If an overriding operation does not have a directly specified Synchronization aspect then the Synchronization aspect of the inherited operation is inherited by the overriding operation. Legality Rules The synchronization_kind By_Protected_Procedure shall not be applied to a primitive procedure of a task interface. A procedure for which the specified synchronization_kind is By_Entry shall be implemented by an entry. A procedure for which the specified synchronization_kind is By_Protected_Procedure shall be implemented by a protected procedure. A procedure for which the specified synchronization_kind is Optional may be implemented by an entry or by a procedure (including a protected procedure). If a primitive procedure overrides an inherited operation for which the Synchronization aspect has been specified to be By_Entry or By_Protected_Procedure, then any specification of the aspect Synchronization applied to the overriding operation shall have the same synchronization_kind. 8 9 10/3 11/3 12/3 13/3 14/3 15/3 16/3 217 13 December 2012 Intertask Communication 9.5 Ada Reference Manual — 2012 Edition 17/3 In addition to the places where Legality Rules normally apply (see 12.3), these rules also apply in the private part of an instance of a generic unit. 18/3 NOTES 18 The synchronization_kind By_Protected_Procedure implies that the operation will not block. 9.5.1 Protected Subprograms and Protected Actions A protected subprogram is a subprogram declared immediately within a protected_definition. Protected procedures provide exclusive read-write access to the data of a protected object; protected functions provide concurrent read-only access to the data. Static Semantics Within the body of a protected function (or a function declared immediately within a protected_body), the current instance of the enclosing protected unit is defined to be a constant (that is, its subcomponents may be read but not updated). Within the body of a protected procedure (or a procedure declared immediately within a protected_body), and within an entry_body, the current instance is defined to be a variable (updating is permitted). Dynamic Semantics For the execution of a call on a protected subprogram, the evaluation of the name or prefix and of the parameter associations, and any assigning back of in out or out parameters, proceeds as for a normal subprogram call (see 6.4). If the call is an internal call (see 9.5), the body of the subprogram is executed as for a normal subprogram call. If the call is an external call, then the body of the subprogram is executed as part of a new protected action on the target protected object; the protected action completes after the body of the subprogram is executed. A protected action can also be started by an entry call (see 9.5.3). A new protected action is not started on a protected object while another protected action on the same protected object is underway, unless both actions are the result of a call on a protected function. This rule is expressible in terms of the execution resource associated with the protected object: • Starting a protected action on a protected object corresponds to acquiring the execution resource associated with the protected object, either for concurrent read-only access if the protected action is for a call on a protected function, or for exclusive read-write access otherwise; • Completing the protected action corresponds to releasing the associated execution resource. After performing an operation on a protected object other than a call on a protected function, but prior to completing the associated protected action, the entry queues (if any) of the protected object are serviced (see 9.5.3). During a protected action, it is a bounded error to invoke an operation that is potentially blocking. The following are defined to be potentially blocking operations: Bounded (Run-Time) Errors • a select_statement; • an accept_statement; • an entry_call_statement; • a delay_statement; • an abort_statement; • task creation or activation; 1 2 3 4 5 6 7 8 9 10 11 12 13 14 9.5 Intertask Communication 13 December 2012 218 Ada Reference Manual — 2012 Edition • an external call on a protected subprogram (or an external requeue) with the same target object as that of the protected action; • a call on a subprogram whose body contains a potentially blocking operation. If the bounded error is detected, Program_Error is raised. If not detected, the bounded error might result in deadlock or a (nested) protected action on the same target object. Certain language-defined subprograms are potentially blocking. In particular, the subprograms of the language-defined input-output packages that manipulate files (implicitly or explicitly) are potentially blocking. Other potentially blocking subprograms are identified where they are defined. When not specified as potentially blocking, a language-defined subprogram is nonblocking. NOTES 19 If two tasks both try to start a protected action on a protected object, and at most one is calling a protected function, then only one of the tasks can proceed. Although the other task cannot proceed, it is not considered blocked, and it might be consuming processing resources while it awaits its turn. There is no language-defined ordering or queuing presumed for tasks competing to start a protected action — on a multiprocessor such tasks might use busy-waiting; for monoprocessor considerations, see D.3, “Priority Ceiling Locking”. 20 The body of a protected unit may contain declarations and bodies for local subprograms. These are not visible outside the protected unit. 21 The body of a protected function can contain internal calls on other protected functions, but not protected procedures, because the current instance is a constant. On the other hand, the body of a protected procedure can contain internal calls on both protected functions and procedures. 22 From within a protected action, an internal call on a protected subprogram, or an external call on a protected subprogram with a different target object is not considered a potentially blocking operation. 15 16 17 18 19 20 21 22 23 The pragma Detect_Blocking may be used to ensure that all executions of potentially blocking operations during a protected action raise Program_Error. See H.5. 22.1/2 Examples of protected subprogram calls (see 9.4): Shared_Array.Set_Component(N, E); E := Shared_Array.Component(M); Control.Release; Examples 9.5.2 Entries and Accept Statements 23 24 Entry_declarations, with the corresponding entry_bodies or accept_statements, are used to define potentially queued operations on tasks and protected objects. 1 entry_declaration ::= [overriding_indicator] entry defining_identifier [(discrete_subtype_definition)] parameter_profile [aspect_specification]; Syntax accept_statement ::= accept entry_direct_name [(entry_index)] parameter_profile [do handled_sequence_of_statements end [entry_identifier]]; entry_index ::= expression 2/3 3 4 219 13 December 2012 Protected Subprograms and Protected Actions 9.5.1 5 6 7 8 9 10 10.1/2 11 12 Ada Reference Manual — 2012 Edition entry_body ::= entry defining_identifier entry_body_formal_part entry_barrier is declarative_part begin handled_sequence_of_statements end [entry_identifier]; entry_body_formal_part ::= [(entry_index_specification)] parameter_profile entry_barrier ::= when condition entry_index_specification ::= for defining_identifier in discrete_subtype_definition If an entry_identifier appears at the end of an accept_statement, it shall repeat the entry_direct_- name. If an entry_identifier appears at the end of an entry_body, it shall repeat the defining_- identifier. An entry_declaration is allowed only in a protected or task declaration. An overriding_indicator is not allowed in an entry_declaration that includes a discrete_subtype_definition. Name Resolution Rules In an accept_statement, the expected profile for the entry_direct_name is that of the entry_declaration; the expected type for an entry_index is that of the subtype defined by the discrete_subtype_definition of the corresponding entry_declaration. Within the handled_sequence_of_statements of an accept_statement, if a selected_component has a prefix that denotes the corresponding entry_declaration, then the entity denoted by the prefix is the accept_statement, and the selected_component is interpreted as an expanded name (see 4.1.3); the selector_name of the selected_component has to be the identifier for some formal parameter of the accept_statement. Legality Rules 13 An entry_declaration in a task declaration shall not contain a specification for an access parameter (see 3.10). 13.1/2 If an entry_declaration has an overriding_indicator, then at the point of the declaration: 13.2/2 13.3/2 13.4/2 14 • • if the overriding_indicator is overriding, then the entry shall implement an inherited subprogram; if the overriding_indicator is not overriding, then the entry shall not implement any inherited subprogram. In addition to the places where Legality Rules normally apply (see 12.3), these rules also apply in the private part of an instance of a generic unit. For an accept_statement, the innermost enclosing body shall be a task_body, and the entry_direct_name shall denote an entry_declaration in the corresponding task declaration; the profile of the accept_- statement shall conform fully to that of the corresponding entry_declaration. An accept_statement shall have a parenthesized entry_index if and only if the corresponding entry_declaration has a discrete_- subtype_definition. 15 An accept_statement shall not be within another accept_statement that corresponds to the same entry_- declaration, nor within an asynchronous_select inner to the enclosing task_body. 9.5.2 Entries and Accept Statements 13 December 2012 220 Ada Reference Manual — 2012 Edition An entry_declaration of a protected unit requires a completion, which shall be an entry_body, and every entry_body shall be the completion of an entry_declaration of a protected unit. The profile of the entry_- body shall conform fully to that of the corresponding declaration. An entry_body_formal_part shall have an entry_index_specification if and only if the corresponding entry_declaration has a discrete_subtype_definition. In this case, the discrete_subtype_definitions of the entry_declaration and the entry_index_specification shall fully conform to one another (see 6.3.1). A name that denotes a formal parameter of an entry_body is not allowed within the entry_barrier of the entry_body. Static Semantics The parameter modes defined for parameters in the parameter_profile of an entry_declaration are the same as for a subprogram_declaration and have the same meaning (see 6.2). An entry_declaration with a discrete_subtype_definition (see 3.6) declares a family of distinct entries having the same profile, with one such entry for each value of the entry index subtype defined by the discrete_subtype_definition. A name for an entry of a family takes the form of an indexed_component, where the prefix denotes the entry_declaration for the family, and the index value identifies the entry within the family. The term single entry is used to refer to any entry other than an entry of an entry family. In the entry_body for an entry family, the entry_index_specification declares a named constant whose subtype is the entry index subtype defined by the corresponding entry_declaration; the value of the named entry index identifies which entry of the family was called. 16 17 18 19 20 21 Dynamic Semantics The elaboration of an entry_declaration for an entry family consists of the elaboration of the discrete_- subtype_definition, as described in 3.8. The elaboration of an entry_declaration for a single entry has no effect. 22/1 The actions to be performed when an entry is called are specified by the corresponding accept_- statements (if any) for an entry of a task unit, and by the corresponding entry_body for an entry of a protected unit. For the execution of an accept_statement, the entry_index, if any, is first evaluated and converted to the entry index subtype; this index value identifies which entry of the family is to be accepted. Further execution of the accept_statement is then blocked until a caller of the corresponding entry is selected (see 9.5.3), whereupon the handled_sequence_of_statements, if any, of the accept_statement is executed, with the formal parameters associated with the corresponding actual parameters of the selected entry call. Upon completion of the handled_sequence_of_statements, the accept_statement completes and is left. When an exception is propagated from the handled_sequence_of_statements of an accept_statement, the same exception is also raised by the execution of the corresponding entry_call_statement. The above interaction between a calling task and an accepting task is called a rendezvous. After a rendezvous, the two tasks continue their execution independently. An entry_body is executed when the condition of the entry_barrier evaluates to True and a caller of the corresponding single entry, or entry of the corresponding entry family, has been selected (see 9.5.3). For the execution of the entry_body, the declarative_part of the entry_body is elaborated, and the handled_- sequence_of_statements of the body is executed, as for the execution of a subprogram_body. The value of the named entry index, if any, is determined by the value of the entry index specified in the entry_name of the selected entry call (or intermediate requeue_statement — see 9.5.4). 23 24 25 26 221 13 December 2012 Entries and Accept Statements 9.5.2 27 28 29/2 30 31 32 33 34 35 36 37 1 2 3 4 5 Ada Reference Manual — 2012 Edition NOTES 24 A task entry has corresponding accept_statements (zero or more), whereas a protected entry has a corresponding entry_body (exactly one). 25 A consequence of the rule regarding the allowed placements of accept_statements is that a task can execute accept_statements only for its own entries. 26 A return statement (see 6.5) or a requeue_statement (see 9.5.4) may be used to complete the execution of an accept_statement or an entry_body. 27 The condition in the entry_barrier may reference anything visible except the formal parameters of the entry. This includes the entry index (if any), the components (including discriminants) of the protected object, the Count attribute of an entry of that protected object, and data global to the protected unit. The restriction against referencing the formal parameters within an entry_barrier ensures that all calls of the same entry see the same barrier value. If it is necessary to look at the parameters of an entry call before deciding whether to handle it, the entry_barrier can be “when True” and the caller can be requeued (on some private entry) when its parameters indicate that it cannot be handled immediately. Examples of entry declarations: entry Read(V : out Item); entry Seize; entry Request(Level)(D : Item); -- a family of entries Examples Examples of accept statements: accept Shut_Down; accept Read(V : out Item) do V := Local_Item; end Read; accept Request(Low)(D : Item) do ... end Request; 9.5.3 Entry Calls An entry_call_statement (an entry call) can appear in various contexts. A simple entry call is a stand- alone statement that represents an unconditional call on an entry of a target task or a protected object. Entry calls can also appear as part of select_statements (see 9.7). entry_call_statement ::= entry_name [actual_parameter_part]; Syntax Name Resolution Rules The entry_name given in an entry_call_statement shall resolve to denote an entry. The rules for parameter associations are the same as for subprogram calls (see 6.4 and 6.4.1). The entry_name of an entry_call_statement specifies (explicitly or implicitly) the target object of the call, the entry or entry family, and the entry index, if any (see 9.5). Static Semantics Under certain circumstances (detailed below), an entry of a task or protected object is checked to see whether it is open or closed: Dynamic Semantics 9.5.2 Entries and Accept Statements 13 December 2012 222 Ada Reference Manual — 2012 Edition • An entry of a task is open if the task is blocked on an accept_statement that corresponds to the entry (see 9.5.2), or on a selective_accept (see 9.7.1) with an open accept_alternative that corresponds to the entry; otherwise, it is closed. • An entry of a protected object is open if the condition of the entry_barrier of the corresponding entry_body evaluates to True; otherwise, it is closed. If the evaluation of the condition propagates an exception, the exception Program_Error is propagated to all current callers of all entries of the protected object. For the execution of an entry_call_statement, evaluation of the name and of the parameter associations is as for a subprogram call (see 6.4). The entry call is then issued: For a call on an entry of a protected object, a new protected action is started on the object (see 9.5.1). The named entry is checked to see if it is open; if open, the entry call is said to be selected immediately, and the execution of the call proceeds as follows: • For a call on an open entry of a task, the accepting task becomes ready and continues the execution of the corresponding accept_statement (see 9.5.2). • For a call on an open entry of a protected object, the corresponding entry_body is executed (see 9.5.2) as part of the protected action. If the accept_statement or entry_body completes other than by a requeue (see 9.5.4), return is made to the caller (after servicing the entry queues — see below); any necessary assigning back of formal to actual parameters occurs, as for a subprogram call (see 6.4.1); such assignments take place outside of any protected action. If the named entry is closed, the entry call is added to an entry queue (as part of the protected action, for a call on a protected entry), and the call remains queued until it is selected or cancelled; there is a separate (logical) entry queue for each entry of a given task or protected object (including each entry of an entry family). When a queued call is selected, it is removed from its entry queue. Selecting a queued call from a particular entry queue is called servicing the entry queue. An entry with queued calls can be serviced under the following circumstances: • When the associated task reaches a corresponding accept_statement, or a selective_accept with a corresponding open accept_alternative; • If after performing, as part of a protected action on the associated protected object, an operation on the object other than a call on a protected function, the entry is checked and found to be open. If there is at least one call on a queue corresponding to an open entry, then one such call is selected according to the entry queuing policy in effect (see below), and the corresponding accept_statement or entry_body is executed as above for an entry call that is selected immediately. The entry queuing policy controls selection among queued calls both for task and protected entry queues. The default entry queuing policy is to select calls on a given entry queue in order of arrival. If calls from two or more queues are simultaneously eligible for selection, the default entry queuing policy does not specify which queue is serviced first. Other entry queuing policies can be specified by pragmas (see D.4). For a protected object, the above servicing of entry queues continues until there are no open entries with queued calls, at which point the protected action completes. For an entry call that is added to a queue, and that is not the triggering_statement of an asynchronous_- select (see 9.7.4), the calling task is blocked until the call is cancelled, or the call is selected and a corresponding accept_statement or entry_body completes without requeuing. In addition, the calling task is blocked during a rendezvous. 6/3 7/3 8 9 10 11 12 13 14 15 16 17 18 19 223 13 December 2012 Entry Calls 9.5.3 20 21 22 23 24 25 26 27 28 29 30 31 Ada Reference Manual — 2012 Edition An attempt can be made to cancel an entry call upon an abort (see 9.8) and as part of certain forms of select_statement (see 9.7.2, 9.7.3, and 9.7.4). The cancellation does not take place until a point (if any) when the call is on some entry queue, and not protected from cancellation as part of a requeue (see 9.5.4); at such a point, the call is removed from the entry queue and the call completes due to the cancellation. The cancellation of a call on an entry of a protected object is a protected action, and as such cannot take place while any other protected action is occurring on the protected object. Like any protected action, it includes servicing of the entry queues (in case some entry barrier depends on a Count attribute). A call on an entry of a task that has already completed its execution raises the exception Tasking_Error at the point of the call; similarly, this exception is raised at the point of the call if the called task completes its execution or becomes abnormal before accepting the call or completing the rendezvous (see 9.8). This applies equally to a simple entry call and to an entry call as part of a select_statement. Implementation Permissions An implementation may perform the sequence of steps of a protected action using any thread of control; it need not be that of the task that started the protected action. If an entry_body completes without requeuing, then the corresponding calling task may be made ready without waiting for the entire protected action to complete. When the entry of a protected object is checked to see whether it is open, the implementation need not reevaluate the condition of the corresponding entry_barrier if no variable or attribute referenced by the condition (directly or indirectly) has been altered by the execution (or cancellation) of a protected procedure or entry call on the object since the condition was last evaluated. An implementation may evaluate the conditions of all entry_barriers of a given protected object any time any entry of the object is checked to see if it is open. When an attempt is made to cancel an entry call, the implementation need not make the attempt using the thread of control of the task (or interrupt) that initiated the cancellation; in particular, it may use the thread of control of the caller itself to attempt the cancellation, even if this might allow the entry call to be selected in the interim. NOTES 28 If an exception is raised during the execution of an entry_body, it is propagated to the corresponding caller (see 11.4). 29 For a call on a protected entry, the entry is checked to see if it is open prior to queuing the call, and again thereafter if its Count attribute (see 9.9) is referenced in some entry barrier. 30 In addition to simple entry calls, the language permits timed, conditional, and asynchronous entry calls (see 9.7.2, 9.7.3, and see 9.7.4). 31 The condition of an entry_barrier is allowed to be evaluated by an implementation more often than strictly necessary, even if the evaluation might have side effects. On the other hand, an implementation need not reevaluate the condition if nothing it references was updated by an intervening protected action on the protected object, even if the condition references some global variable that might have been updated by an action performed from outside of a protected action. Examples Examples of entry calls: Agent.Shut_Down; -- see 9.1 Parser.Next_Lexeme(E); -- see 9.1 Pool(5).Read(Next_Char); -- see 9.1 Controller.Request(Low)(Some_Item); -- see 9.1 Flags(3).Seize; -- see 9.4 9.5.3 Entry Calls 13 December 2012 224 Ada Reference Manual — 2012 Edition 9.5.4 Requeue Statements A requeue_statement can be used to complete an accept_statement or entry_body, while redirecting the corresponding entry call to a new (or the same) entry queue. Such a requeue can be performed with or without allowing an intermediate cancellation of the call, due to an abort or the expiration of a delay. requeue_statement ::= requeue procedure_or_entry_name [with abort]; Syntax Name Resolution Rules The procedure_or_entry_name of a requeue_statement shall resolve to denote a procedure or an entry (the requeue target). The profile of the entry, or the profile or prefixed profile of the procedure, shall either have no parameters, or be type conformant (see 6.3.1) with the profile of the innermost enclosing entry_body or accept_statement. Legality Rules A requeue_statement shall be within a callable construct that is either an entry_body or an accept_statement, and this construct shall be the innermost enclosing body or callable construct. If the requeue target has parameters, then its (prefixed) profile shall be subtype conformant with the profile of the innermost enclosing callable construct. If the target is a procedure, the name shall denote a renaming of an entry, or shall denote a view or a prefixed view of a primitive subprogram of a synchronized interface, where the first parameter of the unprefixed view of the primitive subprogram shall be a controlling parameter, and the Synchronization aspect shall be specified with synchronization_kind By_Entry for the primitive subprogram. In a requeue_statement of an accept_statement of some task unit, either the target object shall be a part of a formal parameter of the accept_statement, or the accessibility level of the target object shall not be equal to or statically deeper than any enclosing accept_statement of the task unit. In a requeue_- statement of an entry_body of some protected unit, either the target object shall be a part of a formal parameter of the entry_body, or the accessibility level of the target object shall not be statically deeper than that of the entry_declaration for the entry_body. Dynamic Semantics The execution of a requeue_statement proceeds by first evaluating the procedure_or_entry_name, including the prefix identifying the target task or protected object and the expression identifying the entry within an entry family, if any. The entry_body or accept_statement enclosing the requeue_statement is then completed, finalized, and left (see 7.6.1). For the execution of a requeue on an entry of a target task, after leaving the enclosing callable construct, the named entry is checked to see if it is open and the requeued call is either selected immediately or queued, as for a normal entry call (see 9.5.3). For the execution of a requeue on an entry of a target protected object, after leaving the enclosing callable construct: • if the requeue is an internal requeue (that is, the requeue is back on an entry of the same protected object — see 9.5), the call is added to the queue of the named entry and the ongoing protected action continues (see 9.5.1); 1 2/3 3/3 4 5/3 5.1/3 6/3 7/3 8 9 10 225 13 December 2012 Requeue Statements 9.5.4 Ada Reference Manual — 2012 Edition 11 • if the requeue is an external requeue (that is, the target protected object is not implicitly the same as the current object — see 9.5), a protected action is started on the target object and proceeds as for a normal entry call (see 9.5.3). 12/3 If the requeue target named in the requeue_statement has formal parameters, then during the execution of the accept_statement or entry_body corresponding to the new entry, the formal parameters denote the same objects as did the corresponding formal parameters of the callable construct completed by the requeue. In any case, no parameters are specified in a requeue_statement; any parameter passing is implicit. 13 14 15 16 17 18 19 20 1 2 3 4 5 If the requeue_statement includes the reserved words with abort (it is a requeue-with-abort), then: • • if the original entry call has been aborted (see 9.8), then the requeue acts as an abort completion point for the call, and the call is cancelled and no requeue is performed; if the original entry call was timed (or conditional), then the original expiration time is the expiration time for the requeued call. If the reserved words with abort do not appear, then the call remains protected against cancellation while queued as the result of the requeue_statement. NOTES 32 A requeue is permitted from a single entry to an entry of an entry family, or vice-versa. The entry index, if any, plays no part in the subtype conformance check between the profiles of the two entries; an entry index is part of the entry_name for an entry of a family. Examples of requeue statements: Examples requeue Request(Medium) with abort; -- requeue on a member of an entry family of the current task, see 9.1 requeue Flags(I).Seize; -- requeue on an entry of an array component, see 9.4 9.6 Delay Statements, Duration, and Time A delay_statement is used to block further execution until a specified expiration time is reached. The expiration time can be specified either as a particular point in time (in a delay_until_statement), or in seconds from the current time (in a delay_relative_statement). The language-defined package Calendar provides definitions for a type Time and associated operations, including a function Clock that returns the current time. delay_statement ::= delay_until_statement | delay_relative_statement delay_until_statement ::= delay until delay_expression; delay_relative_statement ::= delay delay_expression; Syntax Name Resolution Rules The expected type for the delay_expression in a delay_relative_statement is the predefined type Duration. The delay_expression in a delay_until_statement is expected to be of any nonlimited type. 6/3 There can be multiple time bases, each with a corresponding clock, and a corresponding time type. The type of the delay_expression in a delay_until_statement shall be a time type — either the type Time Legality Rules 9.5.4 Requeue Statements 13 December 2012 226 Ada Reference Manual — 2012 Edition defined in the language-defined package Calendar (see below), the type Time in the package Real_Time (see D.8), or some other implementation-defined time type. Static Semantics There is a predefined fixed point type named Duration, declared in the visible part of package Standard; a value of type Duration is used to represent the length of an interval of time, expressed in seconds. The type Duration is not specific to a particular time base, but can be used with any time base. A value of the type Time in package Calendar, or of some other time type, represents a time as reported by a corresponding clock. The following language-defined library package exists: package Ada.Calendar is type Time is private; subtype Year_Number is Integer range 1901 .. 2399; subtype Month_Number is Integer range 1 .. 12; subtype Day_Number is Integer range 1 .. 31; subtype Day_Duration is Duration range 0.0 .. 86_400.0; function Clock return Time; function Year (Date : Time) return Year_Number; function Month (Date : Time) return Month_Number; function Day (Date : Time) return Day_Number; function Seconds(Date : Time) return Day_Duration; procedure Split (Date : in Time; Year : out Year_Number; Month : out Month_Number; Day : out Day_Number; Seconds : out Day_Duration); function Time_Of(Year : Year_Number; Month : Month_Number; Day : Day_Number; Seconds : Day_Duration := 0.0) return Time; function "+" (Left : Time; Right : Duration) return Time; function "+" (Left : Duration; Right : Time) return Time; function "-" (Left : Time; Right : Duration) return Time; function "-" (Left : Time; Right : Time) return Duration; function "<" (Left, Right : Time) return Boolean; function "<="(Left, Right : Time) return Boolean; function ">" (Left, Right : Time) return Boolean; function ">="(Left, Right : Time) return Boolean; Time_Error : exception; private ... -- not specified by the language end Ada.Calendar; Dynamic Semantics the execution of a delay_statement, For first evaluated. For a delay_until_statement, the expiration time for the delay is the value of the delay_expression, in the time base associated with the type of the expression. For a delay_relative_statement, the expiration time is defined as the current time, in the time base associated with relative delays, plus the value of the delay_expression converted to the type Duration, and then rounded up to the next clock tick. The time base associated with relative delays is as defined in D.9, “Delay Accuracy” or is implementation defined. the delay_expression is 7 8/3 9 10 11/2 12 13 14 15 16 17 18 19 20 227 13 December 2012 Delay Statements, Duration, and Time 9.6 Ada Reference Manual — 2012 Edition 21 22/3 23 24/2 25 26/1 27 The task executing a delay_statement is blocked until the expiration time is reached, at which point it becomes ready again. If the expiration time has already passed, the task is not blocked. If an attempt is made to cancel the delay_statement (as part of an asynchronous_select or abort — see 9.7.4 and 9.8), the statement is cancelled if the expiration time has not yet passed, thereby completing the delay_statement. The time base associated with the type Time of package Calendar is implementation defined. The function Clock of package Calendar returns a value representing the current time for this time base. The implementation-defined value of the named number System.Tick (see 13.7) is an approximation of the length of the real-time interval during which the value of Calendar.Clock remains constant. The functions Year, Month, Day, and Seconds return the corresponding values for a given value of the type Time, as appropriate to an implementation-defined time zone; the procedure Split returns all four corresponding values. Conversely, the function Time_Of combines a year number, a month number, a day number, and a duration, into a value of type Time. The operators "+" and "–" for addition and subtraction of times and durations, and the relational operators for times, have the conventional meaning. If Time_Of is called with a seconds value of 86_400.0, the value returned is equal to the value of Time_Of for the next day with a seconds value of 0.0. The value returned by the function Seconds or through the Seconds parameter of the procedure Split is always less than 86_400.0. The exception Time_Error is raised by the function Time_Of if the actual parameters do not form a proper date. This exception is also raised by the operators "+" and "–" if the result is not representable in the type Time or Duration, as appropriate. This exception is also raised by the functions Year, Month, Day, and Seconds and the procedure Split if the year number of the given date is outside of the range of the subtype Year_Number. Implementation Requirements The implementation of the type Duration shall allow representation of time intervals (both positive and negative) up to at least 86400 seconds (one day); Duration'Small shall not be greater than twenty milliseconds. The implementation of the type Time shall allow representation of all dates with year numbers in the range of Year_Number; it may allow representation of other dates as well (both earlier and later). 28/3 An implementation may define additional time types. Implementation Permissions 29 30 31 32 An implementation may raise Time_Error if the value of a delay_expression in a delay_until_statement of a select_statement represents a time more than 90 days past the current time. The actual limit, if any, is implementation-defined. Implementation Advice Whenever possible in an implementation, the value of Duration'Small should be no greater than 100 microseconds. The time base for delay_relative_statements should be monotonic; it need not be the same time base as used for Calendar.Clock. NOTES 33 A delay_relative_statement with a negative value of the delay_expression is equivalent to one with a zero value. 9.6 Delay Statements, Duration, and Time 13 December 2012 228 Ada Reference Manual — 2012 Edition 34 A delay_statement may be executed by the environment task; consequently delay_statements may be executed as part of the elaboration of a library_item or the execution of the main subprogram. Such statements delay the environment task (see 10.2). 35 A delay_statement is an abort completion point and a potentially blocking operation, even if the task is not actually blocked. 36 There is no necessary relationship between System.Tick (the resolution of the clock of package Calendar) and Duration'Small (the small of type Duration). 37 Additional requirements associated with delay_statements are given in D.9, “Delay Accuracy”. Example of a relative delay statement: delay 3.0; -- delay 3.0 seconds Example of a periodic task: Examples declare use Ada.Calendar; Next_Time : Time := Clock + Period; -- Period is a global constant of type Duration begin loop -- repeated every Period seconds delay until Next_Time; ... -- perform some actions Next_Time := Next_Time + Period; end loop; end; 9.6.1 Formatting, Time Zones, and other operations for Time The following language-defined library packages exist: Static Semantics package Ada.Calendar.Time_Zones is -- Time zone manipulation: type Time_Offset is range -28*60 .. 28*60; Unknown_Zone_Error : exception; function UTC_Time_Offset (Date : Time := Clock) return Time_Offset; end Ada.Calendar.Time_Zones; package Ada.Calendar.Arithmetic is -- Arithmetic on days: type Day_Count is range -366*(1+Year_Number'Last - Year_Number'First) .. 366*(1+Year_Number'Last - Year_Number'First); subtype Leap_Seconds_Count is Integer range -2047 .. 2047; procedure Difference (Left, Right : in Time; Days : out Day_Count; Seconds : out Duration; Leap_Seconds : out Leap_Seconds_Count); function "+" (Left : Time; Right : Day_Count) return Time; function "+" (Left : Day_Count; Right : Time) return Time; function "-" (Left : Time; Right : Day_Count) return Time; function "-" (Left, Right : Time) return Day_Count; 33 34 35 36 37 38 39 40 1/2 2/2 3/2 4/2 5/2 6/2 7/2 8/2 9/2 10/2 11/2 12/2 13/2 229 13 December 2012 Delay Statements, Duration, and Time 9.6 14/2 15/2 16/2 17/2 18/2 19/2 20/2 21/2 22/2 23/2 24/2 25/2 26/2 27/2 28/2 29/2 30/2 31/2 Ada Reference Manual — 2012 Edition end Ada.Calendar.Arithmetic; with Ada.Calendar.Time_Zones; package Ada.Calendar.Formatting is -- Day of the week: type Day_Name is (Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday); function Day_of_Week (Date : Time) return Day_Name; -- Hours:Minutes:Seconds access: subtype Hour_Number is Natural range 0 .. 23; subtype Minute_Number is Natural range 0 .. 59; subtype Second_Number is Natural range 0 .. 59; subtype Second_Duration is Day_Duration range 0.0 .. 1.0; function Year (Date : Time; Time_Zone : Time_Zones.Time_Offset := 0) return Year_Number; function Month (Date : Time; Time_Zone : Time_Zones.Time_Offset := 0) return Month_Number; function Day (Date : Time; Time_Zone : Time_Zones.Time_Offset := 0) return Day_Number; function Hour (Date : Time; Time_Zone : Time_Zones.Time_Offset := 0) return Hour_Number; function Minute (Date : Time; Time_Zone : Time_Zones.Time_Offset := 0) return Minute_Number; function Second (Date : Time) return Second_Number; function Sub_Second (Date : Time) return Second_Duration; function Seconds_Of (Hour : Hour_Number; Minute : Minute_Number; Second : Second_Number := 0; Sub_Second : Second_Duration := 0.0) return Day_Duration; procedure Split (Seconds : in Day_Duration; Hour : out Hour_Number; Minute : out Minute_Number; Second : out Second_Number; Sub_Second : out Second_Duration); function Time_Of (Year : Year_Number; Month : Month_Number; Day : Day_Number; Hour : Hour_Number; Minute : Minute_Number; Second : Second_Number; Sub_Second : Second_Duration := 0.0; Leap_Second: Boolean := False; Time_Zone : Time_Zones.Time_Offset := 0) return Time; function Time_Of (Year : Year_Number; Month : Month_Number; Day : Day_Number; Seconds : Day_Duration := 0.0; Leap_Second: Boolean := False; Time_Zone : Time_Zones.Time_Offset := 0) return Time; 9.6.1 Formatting, Time Zones, and other operations for Time 13 December 2012 230 Ada Reference Manual — 2012 Edition procedure Split (Date : in Time; Year : out Year_Number; Month : out Month_Number; Day : out Day_Number; Hour : out Hour_Number; Minute : out Minute_Number; Second : out Second_Number; Sub_Second : out Second_Duration; Time_Zone : in Time_Zones.Time_Offset := 0); procedure Split (Date : in Time; Year : out Year_Number; Month : out Month_Number; Day : out Day_Number; Hour : out Hour_Number; Minute : out Minute_Number; Second : out Second_Number; Sub_Second : out Second_Duration; Leap_Second: out Boolean; Time_Zone : in Time_Zones.Time_Offset := 0); procedure Split (Date : in Time; Year : out Year_Number; Month : out Month_Number; Day : out Day_Number; Seconds : out Day_Duration; Leap_Second: out Boolean; Time_Zone : in Time_Zones.Time_Offset := 0); -- Simple image and value: function Image (Date : Time; Include_Time_Fraction : Boolean := False; Time_Zone : Time_Zones.Time_Offset := 0) return String; function Value (Date : String; Time_Zone : Time_Zones.Time_Offset := 0) return Time; function Image (Elapsed_Time : Duration; Include_Time_Fraction : Boolean := False) return String; function Value (Elapsed_Time : String) return Duration; end Ada.Calendar.Formatting; Type Time_Offset represents the number of minutes difference between the implementation-defined time zone used by Calendar and another time zone. function UTC_Time_Offset (Date : Time := Clock) return Time_Offset; Returns, as a number of minutes, the result of subtracting the implementation-defined time zone of Calendar from UTC time, at the time Date. If the time zone of the Calendar implementation is unknown, then Unknown_Zone_Error is raised. procedure Difference (Left, Right : in Time; Days : out Day_Count; Seconds : out Duration; Leap_Seconds : out Leap_Seconds_Count); Returns the difference between Left and Right. Days is the number of days of difference, Seconds is the remainder seconds of difference excluding leap seconds, and Leap_Seconds is the number of leap seconds. If Left < Right, then Seconds <= 0.0, Days <= 0, and Leap_Seconds <= 0. Otherwise, all values are nonnegative. The absolute value of Seconds is always less than 86_400.0. For the returned values, if Days = 0, then Seconds + Duration(Leap_Seconds) = Calendar."–" (Left, Right). 32/2 33/2 34/2 35/2 36/2 37/2 38/2 39/2 40/2 41/2 42/3 43/2 44/2 231 13 December 2012 Formatting, Time Zones, and other operations for Time 9.6.1 Ada Reference Manual — 2012 Edition function "+" (Left : Time; Right : Day_Count) return Time; function "+" (Left : Day_Count; Right : Time) return Time; Adds a number of days to a time value. Time_Error is raised if the result is not representable as a value of type Time. function "-" (Left : Time; Right : Day_Count) return Time; Subtracts a number of days from a time value. Time_Error is raised if the result is not representable as a value of type Time. function "-" (Left, Right : Time) return Day_Count; Subtracts two time values, and returns the number of days between them. This is the same value that Difference would return in Days. function Day_of_Week (Date : Time) return Day_Name; Returns the day of the week for Time. This is based on the Year, Month, and Day values of Time. function Year (Date : Time; Time_Zone : Time_Zones.Time_Offset := 0) return Year_Number; Returns the year for Date, as appropriate for the specified time zone offset. function Month (Date : Time; Time_Zone : Time_Zones.Time_Offset := 0) return Month_Number; Returns the month for Date, as appropriate for the specified time zone offset. function Day (Date : Time; Time_Zone : Time_Zones.Time_Offset := 0) return Day_Number; Returns the day number for Date, as appropriate for the specified time zone offset. function Hour (Date : Time; Time_Zone : Time_Zones.Time_Offset := 0) return Hour_Number; Returns the hour for Date, as appropriate for the specified time zone offset. function Minute (Date : Time; Time_Zone : Time_Zones.Time_Offset := 0) return Minute_Number; Returns the minute within the hour for Date, as appropriate for the specified time zone offset. function Second (Date : Time) return Second_Number; Returns the second within the hour and minute for Date. function Sub_Second (Date : Time) return Second_Duration; Returns the fraction of second for Date (this has the same accuracy as Day_Duration). The value returned is always less than 1.0. 45/2 46/2 47/2 48/2 49/2 50/2 51/2 52/2 53/2 54/2 55/2 56/2 57/2 58/2 59/2 60/2 61/2 62/2 63/2 64/2 65/2 66/2 9.6.1 Formatting, Time Zones, and other operations for Time 13 December 2012 232 Ada Reference Manual — 2012 Edition function Seconds_Of (Hour : Hour_Number; Minute : Minute_Number; Second : Second_Number := 0; Sub_Second : Second_Duration := 0.0) return Day_Duration; Returns a Day_Duration value for the combination of the given Hour, Minute, Second, and Sub_Second. This value can be used in Calendar.Time_Of as well as the argument to Calendar."+" and Calendar."–". If Seconds_Of is called with a Sub_Second value of 1.0, the value returned is equal to the value of Seconds_Of for the next second with a Sub_Second value of 0.0. procedure Split (Seconds : in Day_Duration; Hour : out Hour_Number; Minute : out Minute_Number; Second : out Second_Number; Sub_Second : out Second_Duration); Splits Seconds into Hour, Minute, Second and Sub_Second in such a way that the resulting values all belong to their respective subtypes. The value returned in the Sub_Second parameter is always less than 1.0. If Seconds = 86400.0, Split propagates Time_Error. function Time_Of (Year : Year_Number; Month : Month_Number; Day : Day_Number; Hour : Hour_Number; Minute : Minute_Number; Second : Second_Number; Sub_Second : Second_Duration := 0.0; Leap_Second: Boolean := False; Time_Zone : Time_Zones.Time_Offset := 0) return Time; If Leap_Second is False, returns a Time built from the date and time values, relative to the specified time zone offset. If Leap_Second is True, returns the Time that represents the time within the leap second that is one second later than the time specified by the other parameters. Time_Error is raised if the parameters do not form a proper date or time. If Time_Of is called with a Sub_Second value of 1.0, the value returned is equal to the value of Time_Of for the next second with a Sub_Second value of 0.0. function Time_Of (Year : Year_Number; Month : Month_Number; Day : Day_Number; Seconds : Day_Duration := 0.0; Leap_Second: Boolean := False; Time_Zone : Time_Zones.Time_Offset := 0) return Time; If Leap_Second is False, returns a Time built from the date and time values, relative to the specified time zone offset. If Leap_Second is True, returns the Time that represents the time within the leap second that is one second later than the time specified by the other parameters. Time_Error is raised if the parameters do not form a proper date or time. If Time_Of is called with a Seconds value of 86_400.0, the value returned is equal to the value of Time_Of for the next day with a Seconds value of 0.0. 67/2 68/2 69/2 70/3 71/2 72/2 73/2 74/2 233 13 December 2012 Formatting, Time Zones, and other operations for Time 9.6.1 Ada Reference Manual — 2012 Edition 75/2 76/2 77/2 78/2 79/2 80/2 81/2 82/2 procedure Split (Date : in Time; Year : out Year_Number; Month : out Month_Number; Day : out Day_Number; Hour : out Hour_Number; Minute : out Minute_Number; Second : out Second_Number; Sub_Second : out Second_Duration; Leap_Second: out Boolean; Time_Zone : in Time_Zones.Time_Offset := 0); If Date does not represent a time within a leap second, splits Date into its constituent parts (Year, Month, Day, Hour, Minute, Second, Sub_Second), relative to the specified time zone offset, and sets Leap_Second to False. If Date represents a time within a leap second, set the constituent parts to values corresponding to a time one second earlier than that given by Date, relative to the specified time zone offset, and sets Leap_Seconds to True. The value returned in the Sub_Second parameter is always less than 1.0. procedure Split (Date : in Time; Year : out Year_Number; Month : out Month_Number; Day : out Day_Number; Hour : out Hour_Number; Minute : out Minute_Number; Second : out Second_Number; Sub_Second : out Second_Duration; Time_Zone : in Time_Zones.Time_Offset := 0); Splits Date into its constituent parts (Year, Month, Day, Hour, Minute, Second, Sub_Second), relative to the specified time zone offset. The value returned in the Sub_Second parameter is always less than 1.0. procedure Split (Date : in Time; Year : out Year_Number; Month : out Month_Number; Day : out Day_Number; Seconds : out Day_Duration; Leap_Second: out Boolean; Time_Zone : in Time_Zones.Time_Offset := 0); If Date does not represent a time within a leap second, splits Date into its constituent parts (Year, Month, Day, Seconds), relative to the specified time zone offset, and sets Leap_Second to False. If Date represents a time within a leap second, set the constituent parts to values corresponding to a time one second earlier than that given by Date, relative to the specified time zone offset, and sets Leap_Seconds to True. The value returned in the Seconds parameter is always less than 86_400.0. function Image (Date : Time; Include_Time_Fraction : Boolean := False; Time_Zone : Time_Zones.Time_Offset := 0) return String; Returns a string form of the Date relative to the given Time_Zone. The format is "Year-Month- Day Hour:Minute:Second", where the Year is a 4-digit value, and all others are 2-digit values, of the functions defined in Calendar and Calendar.Formatting, including a leading zero, if needed. The separators between the values are a minus, another minus, a colon, and a single space is True, the integer part of between Sub_Seconds*100 is suffixed to the string as a point followed by a 2-digit value. the Day and Hour. If Include_Time_Fraction 9.6.1 Formatting, Time Zones, and other operations for Time 13 December 2012 234 Ada Reference Manual — 2012 Edition function Value (Date : String; Time_Zone : Time_Zones.Time_Offset := 0) return Time; Returns a Time value for the image given as Date, relative to the given time zone. Constraint_Error is raised if the string is not formatted as described for Image, or the function cannot interpret the given string as a Time value. function Image (Elapsed_Time : Duration; Include_Time_Fraction : Boolean := False) return String; Returns a string form of the Elapsed_Time. The format is "Hour:Minute:Second", where all values are 2-digit values, including a leading zero, if needed. The separators between the values are colons. If Include_Time_Fraction is True, the integer part of Sub_Seconds*100 is suffixed to the string as a point followed by a 2-digit value. If Elapsed_Time < 0.0, the result is Image (abs Elapsed_Time, Include_Time_Fraction) prefixed with a minus sign. If abs Elapsed_Time represents 100 hours or more, the result is implementation-defined. function Value (Elapsed_Time : String) return Duration; Returns a Duration value for the image given as Elapsed_Time. Constraint_Error is raised if the string is not formatted as described for Image, or the function cannot interpret the given string as a Duration value. An implementation should support leap seconds if the target system supports them. If leap seconds are not supported, Difference should return zero for Leap_Seconds, Split should return False for Leap_Second, and Time_Of should raise Time_Error if Leap_Second is True. Implementation Advice NOTES 38 The implementation-defined time zone of package Calendar may, but need not, be the local time zone. UTC_Time_Offset always returns the difference relative to the implementation-defined time zone of package Calendar. If UTC_Time_Offset does not raise Unknown_Zone_Error, UTC time can be safely calculated (within the accuracy of the underlying time-base). 39 Calling Split on the results of subtracting Duration(UTC_Time_Offset*60) from Clock provides the components (hours, minutes, and so on) of the UTC time. In the United States, for example, UTC_Time_Offset will generally be negative. 9.7 Select Statements There are four forms of the select_statement. One form provides a selective wait for one or more select_alternatives. Two provide timed and conditional entry calls. The fourth provides asynchronous transfer of control. Syntax select_statement ::= selective_accept | timed_entry_call | conditional_entry_call | asynchronous_select 83/2 84/2 85/2 86/2 87/2 88/2 89/2 90/2 91/2 1 2 235 13 December 2012 Formatting, Time Zones, and other operations for Time 9.6.1 3 4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Examples Ada Reference Manual — 2012 Edition Example of a select statement: select accept Driver_Awake_Signal; or delay 30.0*Seconds; Stop_The_Train; end select; 9.7.1 Selective Accept This form of the select_statement allows a combination of waiting for, and selecting from, one or more alternatives. The selection may depend on conditions associated with each alternative of the selective_accept. Syntax selective_accept ::= select [guard] select_alternative { or [guard] select_alternative } [ else sequence_of_statements ] end select; guard ::= when condition => select_alternative ::= accept_alternative | delay_alternative | terminate_alternative accept_alternative ::= accept_statement [sequence_of_statements] delay_alternative ::= delay_statement [sequence_of_statements] terminate_alternative ::= terminate; A selective_accept shall contain at least one accept_alternative. In addition, it can contain: • a terminate_alternative (only one); or • one or more delay_alternatives; or • an else part (the reserved word else followed by a sequence_of_statements). These three possibilities are mutually exclusive. If a selective_accept contains more than one delay_alternative, then all shall be delay_relative_- statements, or all shall be delay_until_statements for the same time type. Legality Rules A select_alternative is said to be open if it is not immediately preceded by a guard, or if the condition of its guard evaluates to True. It is said to be closed otherwise. Dynamic Semantics 9.7 Select Statements 13 December 2012 236 Ada Reference Manual — 2012 Edition For the execution of a selective_accept, any guard conditions are evaluated; open alternatives are thus determined. For an open delay_alternative, the delay_expression is also evaluated. Similarly, for an open accept_alternative for an entry of a family, the entry_index is also evaluated. These evaluations are performed in an arbitrary order, except that a delay_expression or entry_index is not evaluated until after evaluating the corresponding condition, if any. Selection and execution of one open alternative, or of the else part, then completes the execution of the selective_accept; the rules for this selection are described below. Open accept_alternatives are first considered. Selection of one such alternative takes place immediately if the corresponding entry already has queued calls. If several alternatives can thus be selected, one of them is selected according to the entry queuing policy in effect (see 9.5.3 and D.4). When such an alternative is selected, the selected call is removed from its entry queue and the handled_sequence_of_statements (if any) of the corresponding accept_statement is executed; after the rendezvous completes any subsequent sequence_of_statements of the alternative is executed. If no selection is immediately possible (in the above sense) and there is no else part, the task blocks until an open alternative can be selected. Selection of the other forms of alternative or of an else part is performed as follows: • An open delay_alternative is selected when its expiration time is reached if no accept_- alternative or other delay_alternative can be selected prior to the expiration time. If several delay_alternatives have this same expiration time, one of them is selected according to the queuing policy in effect (see D.4); the default queuing policy chooses arbitrarily among the delay_alternatives whose expiration time has passed. • The else part is selected and its sequence_of_statements is executed if no accept_alternative can immediately be selected; in particular, if all alternatives are closed. • An open terminate_alternative is selected if the conditions stated at the end of subclause 9.3 are satisfied. The exception Program_Error is raised if all alternatives are closed and there is no else part. NOTES 40 A selective_accept is allowed to have several open delay_alternatives. A selective_accept is allowed to have several open accept_alternatives for the same entry. Example of a task body with a selective accept: Examples task body Server is Current_Work_Item : Work_Item; begin loop select accept Next_Work_Item(WI : in Work_Item) do Current_Work_Item := WI; end; Process_Work_Item(Current_Work_Item); or accept Shut_Down; exit; -- Premature shut down requested or terminate; -- Normal shutdown at end of scope end select; end loop; end Server; 15 16 17 18 19 20/3 21 22 23 24 237 13 December 2012 Selective Accept 9.7.1 Ada Reference Manual — 2012 Edition 9.7.2 Timed Entry Calls A timed_entry_call issues an entry call that is cancelled if the call (or a requeue-with-abort of the call) is not selected before the expiration time is reached. A procedure call may appear rather than an entry call for cases where the procedure might be implemented by an entry. Syntax timed_entry_call ::= select entry_call_alternative or delay_alternative end select; entry_call_alternative ::= procedure_or_entry_call [sequence_of_statements] procedure_or_entry_call ::= procedure_call_statement | entry_call_statement Legality Rules If a procedure_call_statement is used for a procedure_or_entry_call, the procedure_name or procedure_prefix of the procedure_call_statement shall statically denote an entry renamed as a procedure or (a view of) a primitive subprogram of a limited interface whose first parameter is a controlling parameter (see 3.9.2). Dynamic Semantics For the execution of a timed_entry_call, the entry_name, procedure_name, or procedure_prefix, and any actual parameters are evaluated, as for a simple entry call (see 9.5.3) or procedure call (see 6.4). The expiration time (see 9.6) for the call is determined by evaluating the delay_expression of the delay_alternative. If the call is an entry call or a call on a procedure implemented by an entry, the entry call is then issued. Otherwise, the call proceeds as described in 6.4 for a procedure call, followed by the sequence_of_statements of the entry_call_alternative; the sequence_of_statements of the delay_- alternative is ignored. If the call is queued (including due to a requeue-with-abort), and not selected before the expiration time is reached, an attempt to cancel the call is made. If the call completes due to the cancellation, the optional sequence_of_statements of the delay_alternative is executed; if the entry call completes normally, the optional sequence_of_statements of the entry_call_alternative is executed. Examples Example of a timed entry call: select Controller.Request(Medium)(Some_Item); or delay 45.0; -- controller too busy, try something else end select; 1/2 2 3/2 3.1/2 3.2/2 4/2 5 6 7 9.7.2 Timed Entry Calls 13 December 2012 238 Ada Reference Manual — 2012 Edition 9.7.3 Conditional Entry Calls A conditional_entry_call issues an entry call that is then cancelled if it is not selected immediately (or if a requeue-with-abort of the call is not selected immediately). A procedure call may appear rather than an entry call for cases where the procedure might be implemented by an entry. 1/2 Syntax conditional_entry_call ::= select entry_call_alternative else sequence_of_statements end select; Dynamic Semantics The execution of a conditional_entry_call is defined to be equivalent to the execution of a timed_entry_- call with a delay_alternative specifying an immediate expiration time and the same sequence_of_- statements as given after the reserved word else. NOTES 41 A conditional_entry_call may briefly increase the Count attribute of the entry, even if the conditional call is not selected. Examples Example of a conditional entry call: procedure Spin(R : in Resource) is begin loop select R.Seize; return; else null; -- busy waiting end select; end loop; end; 9.7.4 Asynchronous Transfer of Control An asynchronous select_statement provides asynchronous transfer of control upon completion of an entry call or the expiration of a delay. Syntax asynchronous_select ::= select triggering_alternative then abort abortable_part end select; triggering_alternative ::= triggering_statement [sequence_of_statements] triggering_statement ::= procedure_or_entry_call | delay_statement abortable_part ::= sequence_of_statements 239 13 December 2012 Conditional Entry Calls 9.7.3 2 3 4 5 6 1 2 3 4/2 5 6/2 7 8 9 10 11 12 13 1 2 Ada Reference Manual — 2012 Edition Dynamic Semantics For the execution of an asynchronous_select whose triggering_statement is a procedure_or_entry_call, the entry_name, procedure_name, or procedure_prefix, and actual parameters are evaluated as for a simple entry call (see 9.5.3) or procedure call (see 6.4). If the call is an entry call or a call on a procedure implemented by an entry, the entry call is issued. If the entry call is queued (or requeued-with-abort), then the abortable_part is executed. If the entry call is selected immediately, and never requeued-with-abort, then the abortable_part is never started. If the call is on a procedure that is not implemented by an entry, the call proceeds as described in 6.4, followed by the sequence_of_statements of the triggering_- alternative; the abortable_part is never started. For the execution of an asynchronous_select whose triggering_statement is a delay_statement, the delay_expression is evaluated and the expiration time is determined, as for a normal delay_statement. If the expiration time has not already passed, the abortable_part is executed. If the abortable_part completes and is left prior to completion of the triggering_statement, an attempt to cancel the triggering_statement is made. If the attempt to cancel succeeds (see 9.5.3 and 9.6), the asynchronous_select is complete. If the triggering_statement completes other than due to cancellation, the abortable_part is aborted (if started but not yet completed — see 9.8). If the triggering_statement completes normally, the optional sequence_of_statements of the triggering_alternative is executed after the abortable_part is left. Example of a main command loop for a command interpreter: Examples loop select Terminal.Wait_For_Interrupt; Put_Line("Interrupted"); then abort -- This will be abandoned upon terminal interrupt Put_Line("-> "); Get_Line(Command, Last); Process_Command(Command(1..Last)); end select; end loop; Example of a time-limited calculation: select delay 5.0; Put_Line("Calculation does not converge"); then abort -- This calculation should finish in 5.0 seconds; -- if not, it is assumed to diverge. Horribly_Complicated_Recursive_Function(X, Y); end select; 9.8 Abort of a Task - Abort of a Sequence of Statements An abort_statement causes one or more tasks to become abnormal, thus preventing any further interaction with such tasks. The completion of the triggering_statement of an asynchronous_select causes a sequence_of_statements to be aborted. abort_statement ::= abort task_name {, task_name}; Syntax 9.7.4 Asynchronous Transfer of Control 13 December 2012 240 Ada Reference Manual — 2012 Edition Each task_name is expected to be of any task type; they need not all be of the same task type. Name Resolution Rules Dynamic Semantics For the execution of an abort_statement, the given task_names are evaluated in an arbitrary order. Each named task is then aborted, which consists of making the task abnormal and aborting the execution of the corresponding task_body, unless it is already completed. When the execution of a construct is aborted (including that of a task_body or of a sequence_of_- statements), the execution of every construct included within the aborted execution is also aborted, except for executions included within the execution of an abort-deferred operation; the execution of an abort- deferred operation continues to completion without being affected by the abort; the following are the abort-deferred operations: • a protected action; • waiting for an entry call to complete (after having initiated the attempt to cancel it — see below); • waiting for the termination of dependent tasks; • the execution of an Initialize procedure as the last step of the default initialization of a controlled object; the execution of a Finalize procedure as part of the finalization of a controlled object; • • an assignment operation to an object with a controlled part. The last three of these are discussed further in 7.6. When a master is aborted, all tasks that depend on that master are aborted. The order in which tasks become abnormal as the result of an abort_statement or the abort of a sequence_of_statements is not specified by the language. If the execution of an entry call is aborted, an immediate attempt is made to cancel the entry call (see 9.5.3). If the execution of a construct is aborted at a time when the execution is blocked, other than for an entry call, at a point that is outside the execution of an abort-deferred operation, then the execution of the construct completes immediately. For an abort due to an abort_statement, these immediate effects occur before the execution of the abort_statement completes. Other than for these immediate cases, the execution of a construct that is aborted does not necessarily complete before the abort_statement completes. However, the execution of the aborted construct completes no later than its next abort completion point (if any) that occurs outside of an abort-deferred operation; the following are abort completion points for an execution: • • • • the point where the execution initiates the activation of another task; the end of the activation of a task; the start or end of the execution of an entry call, accept_statement, delay_statement, or abort_statement; the start of the execution of a select_statement, or of the sequence_of_statements of an exception_handler. 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 An attempt to execute an asynchronous_select as part of the execution of an abort-deferred operation is a bounded error. Similarly, an attempt to create a task that depends on a master that is included entirely 20/3 Bounded (Run-Time) Errors 241 13 December 2012 Abort of a Task - Abort of a Sequence of Statements 9.8 Ada Reference Manual — 2012 Edition within the execution of an abort-deferred operation is a bounded error. In both cases, Program_Error is raised if the error is detected by the implementation; otherwise, the operations proceed as they would outside an abort-deferred operation, except that an abort of the abortable_part or the created task might or might not have an effect. If an assignment operation completes prematurely due to an abort, the assignment is said to be disrupted; the target of the assignment or its parts can become abnormal, and certain subsequent uses of the object can be erroneous, as explained in 13.9.1. Erroneous Execution NOTES 42 An abort_statement should be used only in situations requiring unconditional termination. 43 A task is allowed to abort any task it can name, including itself. 44 Additional requirements associated with abort are given in D.6, “Preemptive Abort”. 9.9 Task and Entry Attributes Dynamic Semantics For a prefix T that is of a task type (after any implicit dereference), the following attributes are defined: T'Callable Yields the value True when the task denoted by T is callable, and False otherwise; a task is callable unless it is completed or abnormal. The value of this attribute is of the predefined type Boolean. T'Terminated Yields the value True if the task denoted by T is terminated, and False otherwise. The value of this attribute is of the predefined type Boolean. For a prefix E that denotes an entry of a task or protected unit, the following attribute is defined. This attribute is only allowed within the body of the task or protected unit, but excluding, in the case of an entry of a task unit, within any program unit that is, itself, inner to the body of the task unit. E'Count Yields the number of calls presently queued on the entry E of the current instance of the unit. The value of this attribute is of the type universal_integer. NOTES 45 For the Count attribute, the entry can be either a single entry or an entry of a family. The name of the entry or entry family can be either a direct_name or an expanded name. 46 Within task units, algorithms interrogating the attribute E'Count should take precautions to allow for the increase of the value of this attribute for incoming entry calls, and its decrease, for example with timed_entry_calls. Also, a conditional_entry_call may briefly increase this value, even if the conditional call is not accepted. 47 Within protected units, algorithms interrogating the attribute E'Count in the entry_barrier for the entry E should take precautions to allow for the evaluation of the condition of the barrier both before and after queuing a given caller. 21 22 23 24 1 2 3 4 5 6 7 8 9.10 Shared Variables Static Semantics 1/3 If two different objects, including nonoverlapping parts of the same object, are independently addressable, they can be manipulated concurrently by two different tasks without synchronization. Any two nonoverlapping objects are independently addressable if either object is specified as independently addressable (see C.6). Otherwise, two nonoverlapping objects are independently addressable except when they are both parts of a composite object for which a nonconfirming value is specified for any of the 9.8 Abort of a Task - Abort of a Sequence of Statements 13 December 2012 242 Ada Reference Manual — 2012 Edition following representation aspects: (record) Layout, Component_Size, Pack, Atomic, or Convention; in this case it is unspecified whether the parts are independently addressable. Dynamic Semantics Separate tasks normally proceed independently and concurrently with one another. However, task interactions can be used to synchronize the actions of two or more tasks to allow, for example, meaningful communication by the direct updating and reading of variables shared between the tasks. The actions of two different tasks are synchronized in this sense when an action of one task signals an action of the other task; an action A1 is defined to signal an action A2 under the following circumstances: • If A1 and A2 are part of the execution of the same task, and the language rules require A1 to be performed before A2; • If A1 is the action of an activator that initiates the activation of a task, and A2 is part of the execution of the task that is activated; • If A1 is part of the activation of a task, and A2 is the action of waiting for completion of the activation; • If A1 is part of the execution of a task, and A2 is the action of waiting for the termination of the task; 2 3 4 5 6 • If A1 is the termination of a task T, and A2 is either an evaluation of the expression T'Terminated that results in True, or a call to Ada.Task_Identification.Is_Terminated with an actual parameter that identifies T and a result of True (see C.7.1); 6.1/3 • If A1 is the action of issuing an entry call, and A2 is part of the corresponding execution of the 7/3 appropriate entry_body or accept_statement; • If A1 is part of the execution of an accept_statement or entry_body, and A2 is the action of returning from the corresponding entry call; • If A1 is part of the execution of a protected procedure body or entry_body for a given protected object, and A2 is part of a later execution of an entry_body for the same protected object; • If A1 signals some action that in turn signals A2. Erroneous Execution Given an action of assigning to an object, and an action of reading or updating a part of the same object (or of a neighboring object if the two are not independently addressable), then the execution of the actions is erroneous unless the actions are sequential. Two actions are sequential if one of the following is true: • One action signals the other; • Both actions occur as part of the execution of the same task; • Both actions occur as part of protected actions on the same protected object, and at most one of the actions is part of a call on a protected function of the protected object. 8 9 10 11 12 13 14 Aspect Atomic or aspect Atomic_Components may also be specified to ensure that certain reads and updates are sequential — see C.6. 15/3 243 13 December 2012 Shared Variables 9.10 Ada Reference Manual — 2012 Edition 9.11 Example of Tasking and Synchronization Examples The following example defines a buffer protected object to smooth variations between the speed of output of a producing task and the speed of input of some consuming task. For instance, the producing task might have the following structure: task Producer; task body Producer is Person : Person_Name; -- see 3.10.1 begin loop ... -- simulate arrival of the next customer Buffer.Append_Wait(Person); exit when Person = null; end loop; end Producer; and the consuming task might have the following structure: task Consumer; task body Consumer is Person : Person_Name; begin loop Buffer.Remove_First_Wait(Person); exit when Person = null; ... -- simulate serving a customer end loop; end Consumer; The buffer object contains an internal array of person names managed in a round-robin fashion. The array has two indices, an In_Index denoting the index for the next input person name and an Out_Index denoting the index for the next output person name. The Buffer is defined as an extension of the Synchronized_Queue interface (see 3.9.4), and as such promises to implement the abstraction defined by that interface. By doing so, the Buffer can be passed to the Transfer class-wide operation defined for objects of a type covered by Queue'Class. protected Buffer is new Synchronized_Queue with -- see 3.9.4 entry Append_Wait(Person : in Person_Name); entry Remove_First_Wait(Person : out Person_Name); function Cur_Count return Natural; function Max_Count return Natural; procedure Append(Person : in Person_Name); procedure Remove_First(Person : out Person_Name); private Pool : Person_Name_Array(1 .. 100); Count : Natural := 0; In_Index, Out_Index : Positive := 1; end Buffer; protected body Buffer is entry Append_Wait(Person : in Person_Name) when Count < Pool'Length is begin Append(Person); end Append_Wait; 1 2 3/2 4 5 6/2 7/2 7.1/2 8/2 9/2 9.11 Example of Tasking and Synchronization 13 December 2012 244 Ada Reference Manual — 2012 Edition procedure Append(Person : in Person_Name) is begin if Count = Pool'Length then raise Queue_Error with "Buffer Full"; -- see 11.3 end if; Pool(In_Index) := Person; In_Index := (In_Index mod Pool'Length) + 1; Count := Count + 1; end Append; entry Remove_First_Wait(Person : out Person_Name) when Count > 0 is begin Remove_First(Person); end Remove_First_Wait; procedure Remove_First(Person : out Person_Name) is begin if Count = 0 then raise Queue_Error with "Buffer Empty"; -- see 11.3 end if; Person := Pool(Out_Index); Out_Index := (Out_Index mod Pool'Length) + 1; Count := Count - 1; end Remove_First; function Cur_Count return Natural is begin return Buffer.Count; end Cur_Count; function Max_Count return Natural is begin return Pool'Length; end Max_Count; end Buffer; 9.1/2 10/2 11/2 12/2 13/2 245 13 December 2012 Example of Tasking and Synchronization 9.11 Ada Reference Manual — 2012 Edition 10 Program Structure and Compilation Issues The overall structure of programs and the facilities for separate compilation are described in this clause. A program is a set of partitions, each of which may execute in a separate address space, possibly on a separate computer. As explained below, a partition is constructed from library units. Syntactically, the declaration of a library unit is a library_item, as is the body of a library unit. An implementation may support a concept of a program library (or simply, a “library”), which contains library_items and their subunits. Library units may be organized into a hierarchy of children, grandchildren, and so on. This clause has two subclauses: 10.1, “Separate Compilation” discusses compile-time issues related to separate compilation. 10.2, “Program Execution” discusses issues related to what is traditionally known as “link time” and “run time” — building and executing partitions. 10.1 Separate Compilation A program unit is either a package, a task unit, a protected unit, a protected entry, a generic unit, or an explicitly declared subprogram other than an enumeration literal. Certain kinds of program units can be separately compiled. Alternatively, they can appear physically nested within other program units. The text of a program can be submitted to the compiler in one or more compilations. Each compilation is a succession of compilation_units. A compilation_unit contains either the declaration, the body, or a renaming of a program unit. The representation for a compilation is implementation-defined. A library unit is a separately compiled program unit, and is always a package, subprogram, or generic unit. Library units may have other (logically nested) library units as children, and may have other program units physically nested within them. A root library unit, together with its children and grandchildren and so on, form a subsystem. An implementation may impose implementation-defined restrictions on compilations that contain multiple compilation_units. Implementation Permissions 10.1.1 Compilation Units - Library Units A library_item is a compilation unit that is the declaration, body, or renaming of a library unit. Each library unit (except Standard) has a parent unit, which is a library package or generic library package. A library unit is a child of its parent unit. The root library units are the children of the predefined library package Standard. Syntax compilation ::= {compilation_unit} compilation_unit ::= context_clause library_item | context_clause subunit library_item ::= [private] library_unit_declaration | library_unit_body | [private] library_unit_renaming_declaration 1/3 2 3/3 1 2 3 4 1 2 3 4 247 13 December 2012 Program Structure and Compilation Issues 10 5 6 7 8 8.1/2 9 10 11 12 Ada Reference Manual — 2012 Edition library_unit_declaration ::= subprogram_declaration | generic_declaration | package_declaration | generic_instantiation library_unit_renaming_declaration ::= package_renaming_declaration | generic_renaming_declaration | subprogram_renaming_declaration library_unit_body ::= subprogram_body | package_body parent_unit_name ::= name An overriding_indicator is not allowed in a subprogram_declaration, generic_instantiation, or subprogram_renaming_declaration that declares a library unit. A library unit is a program unit that is declared by a library_item. When a program unit is a library unit, the prefix “library” is used to refer to it (or “generic library” if generic), as well as to its declaration and body, as in “library procedure”, “library package_body”, or “generic library package”. The term compilation unit is used to refer to a compilation_unit. When the meaning is clear from context, the term is also used to refer to the library_item of a compilation_unit or to the proper_body of a subunit (that is, the compilation_unit without the context_clause and the separate (parent_unit_name)). The parent declaration of a library_item (and of the library unit) is the declaration denoted by the parent_- unit_name, if any, of the defining_program_unit_name of the library_item. If there is no parent_- unit_name, the parent declaration is the declaration of Standard, the library_item is a root library_item, and the library unit (renaming) is a root library unit (renaming). The declaration and body of Standard itself have no parent declaration. The parent unit of a library_item or library unit is the library unit declared by its parent declaration. The children of a library unit occur immediately within the declarative region of the declaration of the library unit. The ancestors of a library unit are itself, its parent, its parent's parent, and so on. (Standard is an ancestor of every library unit.) The descendant relation is the inverse of the ancestor relation. A library_unit_declaration or a library_unit_renaming_declaration is private if the declaration is immediately preceded by the reserved word private; it is otherwise public. A library unit is private or public according to its declaration. The public descendants of a library unit are the library unit itself, and the public descendants of its public children. Its other descendants are private descendants. 12.1/2 For each library package_declaration in the environment, there is an implicit declaration of a limited view of that library package. The limited view of a package contains: 12.2/3 • For each package_declaration occurring immediately within the visible part, a declaration of the limited view of that package, with the same defining_program_unit_name. 12.3/3 • For each type_declaration occurring immediately within the visible part that is not an incomplete_type_declaration, an incomplete view of the type with no discriminant_part; if the type_declaration is tagged, then the view is a tagged incomplete view. 12.4/2 The limited view of a library package_declaration is private if that library package_declaration is immediately preceded by the reserved word private. 12.5/2 There is no syntax for declaring limited views of packages, because they are always implicit. The implicit declaration of a limited view of a library package is not the declaration of a library unit (the library package_declaration is); nonetheless, it is a library_item. The implicit declaration of the limited view of a library package forms an (implicit) compilation unit whose context_clause is empty. 12.6/2 A library package_declaration is the completion of the declaration of its limited view. 10.1.1 Compilation Units - Library Units 13 December 2012 248 Ada Reference Manual — 2012 Edition The parent unit of a library_item shall be a library package or generic library package. Legality Rules If a defining_program_unit_name of a given declaration or body has a parent_unit_name, then the given declaration or body shall be a library_item. The body of a program unit shall be a library_item if and only if the declaration of the program unit is a library_item. In a library_unit_renaming_declaration, the (old) name shall denote a library_item. A parent_unit_name (which can be used within a defining_program_unit_name of a library_item and in the separate clause of a subunit), and each of its prefixes, shall not denote a renaming_declaration. On in a library_unit_renaming_declaration the other hand, a name nonlimited_with_clause and other places where the name of a library unit is allowed. that denotes a is allowed If a library package is an instance of a generic package, then every child of the library package shall either be itself an instance or be a renaming of a library unit. A child of a generic library package shall either be itself a generic unit or be a renaming of some other child of the same generic unit. A child of a parent generic package shall be instantiated or renamed only within the declarative region of the parent generic. For each child C of some parent generic package P, there is a corresponding declaration C nested immediately within each instance of P. For the purposes of this rule, if a child C itself has a child D, each corresponding declaration for C has a corresponding child D. The corresponding declaration for a child within an instance is visible only within the scope of a with_clause that mentions the (original) child generic unit. A library subprogram shall not override a primitive subprogram. The defining name of a function that is a compilation unit shall not be an operator_symbol. Static Semantics A subprogram_renaming_declaration that is a library_unit_renaming_declaration is a renaming-as- declaration, not a renaming-as-body. There are two kinds of dependences among compilation units: • The semantic dependences (see below) are the ones needed to check the compile-time rules across compilation unit boundaries; a compilation unit depends semantically on the other compilation units needed to determine its legality. The visibility rules are based on the semantic dependences. • The elaboration dependences (see 10.2) determine the order of elaboration of library_items. A library_item depends semantically upon its parent declaration. A subunit depends semantically upon its parent body. A library_unit_body depends semantically upon the corresponding library_unit_declaration, if any. The declaration of the limited view of a library package depends semantically upon the declaration of the limited view of its parent. The declaration of a library package depends semantically upon the declaration of its limited view. A compilation unit depends semantically upon each library_item mentioned in a with_clause of the compilation unit. In addition, if a given compilation unit contains an attribute_reference of a type defined in another compilation unit, then the given compilation unit depends semantically upon the other compilation unit. The semantic dependence relationship is transitive. 249 13 December 2012 Compilation Units - Library Units 10.1.1 13 14 15/2 16 17/3 18 19/2 20 21 22 23 24 25 26/2 Ada Reference Manual — 2012 Edition 26.1/2 The elaboration of the declaration of the limited view of a package has no effect. Dynamic Semantics 27 28 29 30 31 32 33 34 NOTES 1 A simple program may consist of a single compilation unit. A compilation need not have any compilation units; for example, its text can consist of pragmas. 2 The designator of a library function cannot be an operator_symbol, but a nonlibrary renaming_declaration is allowed to rename a library function as an operator. Within a partition, two library subprograms are required to have distinct names and hence cannot overload each other. However, renaming_declarations are allowed to define overloaded names for such subprograms, and a locally declared subprogram is allowed to overload a library subprogram. The expanded name Standard.L can be used to denote a root library unit L (unless the declaration of Standard is hidden) since root library unit declarations occur immediately within the declarative region of package Standard. Examples of library units: Examples package Rational_Numbers.IO is -- public child of Rational_Numbers, see 7.1 procedure Put(R : in Rational); procedure Get(R : out Rational); end Rational_Numbers.IO; private procedure Rational_Numbers.Reduce(R : in out Rational); -- private child of Rational_Numbers with Rational_Numbers.Reduce; -- refer to a private child package body Rational_Numbers is ... end Rational_Numbers; with Rational_Numbers.IO; use Rational_Numbers; with Ada.Text_io; -- see A.10 procedure Main is -- a root library procedure R : Rational; begin R := 5/3; -- construct a rational number, see 7.1 Ada.Text_IO.Put("The answer is: "); IO.Put(R); Ada.Text_IO.New_Line; end Main; with Rational_Numbers.IO; package Rational_IO renames Rational_Numbers.IO; -- a library unit renaming declaration 35 Each of the above library_items can be submitted to the compiler separately. 10.1.2 Context Clauses - With Clauses A context_clause is used to specify the library_items whose names are needed within a compilation unit. context_clause ::= {context_item} context_item ::= with_clause | use_clause Syntax with_clause ::= limited_with_clause | nonlimited_with_clause limited_with_clause ::= limited [private] with library_unit_name {, library_unit_name}; nonlimited_with_clause ::= [private] with library_unit_name {, library_unit_name}; 1 2 3 4/2 4.1/2 4.2/2 10.1.1 Compilation Units - Library Units 13 December 2012 250 Ada Reference Manual — 2012 Edition Name Resolution Rules The scope of a with_clause that appears on a library_unit_declaration or library_unit_renaming_- declaration consists of the entire declarative region of the declaration, which includes all children and subunits. The scope of a with_clause that appears on a body consists of the body, which includes all subunits. A library_item (and the corresponding library unit) is named in a with_clause if it is denoted by a library_unit_name in the with_clause. A library_item (and the corresponding library unit) is mentioned in a with_clause if it is named in the with_clause or if it is denoted by a prefix in the with_clause. Outside its own declarative region, the declaration or renaming of a library unit can be visible only within the scope of a with_clause that mentions it. The visibility of the declaration or renaming of a library unit otherwise follows from its placement in the environment. Legality Rules If a with_clause of a given compilation_unit mentions a private child of some library unit, then the given compilation_unit shall be one of: • • • the declaration, body, or subunit of a private descendant of that library unit; the body or subunit of a public descendant of that library unit, but not a subprogram body acting as a subprogram declaration (see 10.1.4); or the declaration of a public descendant of that library unit, in which case the with_clause shall include the reserved word private. A name denoting a library_item (or the corresponding declaration for a child of a generic within an instance — see 10.1.1), if it is visible only due to being mentioned in one or more with_clauses that include the reserved word private, shall appear only within: • a private part; • a body, but not within the subprogram_specification of a library subprogram body; • a private descendant of the unit on which one of these with_clauses appear; or • a pragma within a context clause. A library_item mentioned in a limited_with_clause shall be the implicit declaration of the limited view of a library package, not the declaration of a subprogram, generic unit, generic instance, or a renaming. A limited_with_clause shall not appear on a library_unit_body, subunit, or library_unit_renaming_- declaration. A limited_with_clause that names a library package shall not appear: • in the context_clause for the explicit declaration of the named library package or any of its descendants; • within a context_clause for a library_item that is within the scope of a nonlimited_with_clause that mentions the same library package; or • within a context_clause for a library_item that is within the scope of a use_clause that names an entity declared within the declarative region of the library package. NOTES 3 A library_item mentioned in a nonlimited_with_clause of a compilation unit is visible within the compilation unit and hence acts just like an ordinary declaration. Thus, within a compilation unit that mentions its declaration, the name of a library package can be given in use_clauses and can be used to form expanded names, a library subprogram can be called, and instances of a generic library unit can be declared. If a child of a parent generic package is mentioned in a 5 6/2 7 8/2 9/2 10/2 11/2 12/3 13/2 14/2 15/2 16/2 17/2 18/2 19/2 20/3 21/3 22/3 23/2 251 13 December 2012 Context Clauses - With Clauses 10.1.2 Ada Reference Manual — 2012 Edition nonlimited_with_clause, then the corresponding declaration nested within each visible instance is visible within the compilation unit. Similarly, a library_item mentioned in a limited_with_clause of a compilation unit is visible within the compilation unit and thus can be used to form expanded names. Examples package Office is end Office; with Ada.Strings.Unbounded; package Office.Locations is type Location is new Ada.Strings.Unbounded.Unbounded_String; end Office.Locations; limited with Office.Departments; -- types are incomplete private with Office.Locations; -- only visible in private part package Office.Employees is type Employee is private; function Dept_Of(Emp : Employee) return access Departments.Department; procedure Assign_Dept(Emp : in out Employee; Dept : access Departments.Department); ... private type Employee is record Dept : access Departments.Department; Loc : Locations.Location; ... end record; end Office.Employees; limited with Office.Employees; package Office.Departments is type Department is private; function Manager_Of(Dept : Department) return access Employees.Employee; procedure Assign_Manager(Dept : in out Department; Mgr : access Employees.Employee); ... end Office.Departments; The limited_with_clause may be used to support mutually dependent abstractions that are split across multiple packages. In this case, an employee is assigned to a department, and a department has a manager who is an employee. If a with_clause with the reserved word private appears on one library unit and mentions a second library unit, it provides visibility to the second library unit, but restricts that visibility to the private part and body of the first unit. The compiler checks that no use is made of the second unit in the visible part of the first unit. 10.1.3 Subunits of Compilation Units Subunits are like child units, with these (important) differences: subunits support the separate compilation of bodies only (not declarations); the parent contains a body_stub to indicate the existence and place of each of its subunits; declarations appearing in the parent's body can be visible within the subunits. body_stub ::= subprogram_body_stub | package_body_stub | task_body_stub | protected_body_stub Syntax subprogram_body_stub ::= [overriding_indicator] subprogram_specification is separate [aspect_specification]; 24/2 25/2 26/2 27/2 28/2 29/2 30/2 31/2 1 2 3/3 10.1.2 Context Clauses - With Clauses 13 December 2012 252 Ada Reference Manual — 2012 Edition package_body_stub ::= package body defining_identifier is separate [aspect_specification]; task_body_stub ::= task body defining_identifier is separate [aspect_specification]; protected_body_stub ::= protected body defining_identifier is separate [aspect_specification]; subunit ::= separate (parent_unit_name) proper_body Legality Rules The parent body of a subunit is the body of the program unit denoted by its parent_unit_name. The term subunit is used to refer to a subunit and also to the proper_body of a subunit. The subunits of a program unit include any subunit that names that program unit as its parent, as well as any subunit that names such a subunit as its parent (recursively). 4 5 6 7 8/2 The parent body of a subunit shall be present in the current environment, and shall contain a corresponding body_stub with the same defining_identifier as the subunit. 9 A package_body_stub shall be the completion of a package_declaration or generic_package_- declaration; a task_body_stub shall be the completion of a task declaration; a protected_body_stub shall be the completion of a protected declaration. 10/3 In contrast, a subprogram_body_stub need not be the completion of a previous declaration, in which case the _stub declares the subprogram. If the _stub is a completion, it shall be the completion of a subprogram_declaration or generic_subprogram_declaration. The profile of a subprogram_body_stub that completes a declaration shall conform fully to that of the declaration. A subunit that corresponds to a body_stub shall be of the same kind (package_, subprogram_, task_, or protected_) as the body_stub. The profile of a subprogram_body subunit shall be fully conformant to that of the corresponding body_stub. A body_stub shall appear immediately within the declarative_part of a compilation unit body. This rule does not apply within an instance of a generic unit. The defining_identifiers of all body_stubs that appear immediately within a particular declarative_part shall be distinct. For each body_stub, there shall be a subunit containing the corresponding proper_body. Post-Compilation Rules NOTES 4 The rules in 10.1.4, “The Compilation Process” say that a body_stub is equivalent to the corresponding proper_body. This implies: • Visibility within a subunit is the visibility that would be obtained at the place of the corresponding body_stub (within the parent body) if the context_clause of the subunit were appended to that of the parent body. • The effect of the elaboration of a body_stub is to elaborate the subunit. 11 12 13 14 15 16 17 18 253 13 December 2012 Subunits of Compilation Units 10.1.3 19 20 21 22 23 24 1 2 3/2 4/3 Ada Reference Manual — 2012 Edition The package Parent is first written without subunits: Examples package Parent is procedure Inner; end Parent; with Ada.Text_IO; package body Parent is Variable : String := "Hello, there."; procedure Inner is begin Ada.Text_IO.Put_Line(Variable); end Inner; end Parent; The body of procedure Inner may be turned into a subunit by rewriting the package body as follows (with the declaration of Parent remaining the same): package body Parent is Variable : String := "Hello, there."; procedure Inner is separate; end Parent; with Ada.Text_IO; separate(Parent) procedure Inner is begin Ada.Text_IO.Put_Line(Variable); end Inner; 10.1.4 The Compilation Process Each compilation unit submitted to the compiler is compiled in the context of an environment declarative_part (or simply, an environment), which is a conceptual declarative_part that forms the outermost declarative region of the context of any compilation. At run time, an environment forms the declarative_part of the body of the environment task of a partition (see 10.2, “Program Execution”). The declarative_items of the environment are library_items appearing in an order such that there are no forward semantic dependences. Each included subunit occurs in place of the corresponding stub. The visibility rules apply as if the environment were the outermost declarative region, except that with_clauses are needed to make declarations of library units visible (see 10.1.2). The mechanisms for creating an environment and for adding and replacing compilation units within an environment are implementation defined. The mechanisms for adding a compilation unit mentioned in a limited_with_clause to an environment are implementation defined. Name Resolution Rules If a library_unit_body that is a subprogram_body is submitted to the compiler, it is interpreted only as a completion if a library_unit_declaration with the same defining_program_unit_name already exists in the environment for a subprogram other than an instance of a generic subprogram or for a generic subprogram (even if the profile of the body is not type conformant with that of the declaration); otherwise, the subprogram_body is interpreted as both the declaration and body of a library subprogram. 5 When a compilation unit is compiled, all compilation units upon which it depends semantically shall already exist in the environment; the set of these compilation units shall be consistent in the sense that the Legality Rules 10.1.3 Subunits of Compilation Units 13 December 2012 254 Ada Reference Manual — 2012 Edition new compilation unit shall not semantically depend (directly or indirectly) on two different versions of the same compilation unit, nor on an earlier version of itself. Implementation Permissions The implementation may require that a compilation unit be legal before it can be mentioned in a limited_with_clause or it can be inserted into the environment. When a compilation unit that declares or renames a library unit is added to the environment, the implementation may remove from the environment any preexisting library_item or subunit with the same full expanded name. When a compilation unit that is a subunit or the body of a library unit is added to the environment, the implementation may remove from the environment any preexisting version of the same compilation unit. When a compilation unit that contains a body_stub is added to the environment, the implementation may remove any preexisting library_item or subunit with the same full expanded name as the body_stub. When a given compilation unit is removed from the environment, the implementation may also remove any compilation unit that depends semantically upon the given one. If the given compilation unit contains the body of a subprogram for which aspect Inline is True, the implementation may also remove any compilation unit containing a call to that subprogram. NOTES 5 The rules of the language are enforced across compilation and compilation unit boundaries, just as they are enforced within a single compilation unit. 6 An implementation may support a concept of a library, which contains library_items. If multiple libraries are supported, the implementation has to define how a single environment is constructed when a compilation unit is submitted to the compiler. Naming conflicts between different libraries might be resolved by treating each library as the root of a hierarchy of child library units. 7 A compilation unit containing an instantiation of a separately compiled generic unit does not semantically depend on the body of the generic unit. Therefore, replacing the generic body in the environment does not result in the removal of the compilation unit containing the instantiation. 10.1.5 Pragmas and Program Units This subclause discusses pragmas related to program units, library units, and compilations. Name Resolution Rules Certain pragmas are defined to be program unit pragmas. A name given as the argument of a program unit pragma shall resolve to denote the declarations or renamings of one or more program units that occur immediately within the declarative region or compilation in which the pragma immediately occurs, or it shall resolve to denote the declaration of the immediately enclosing program unit (if any); the pragma applies to the denoted program unit(s). If there are no names given as arguments, the pragma applies to the immediately enclosing program unit. A program unit pragma shall appear in one of these places: Legality Rules • At the place of a compilation_unit, in which case the pragma shall immediately follow in the same compilation (except for other pragmas) a library_unit_declaration that is a subprogram_- declaration, generic_subprogram_declaration, or generic_instantiation, and the pragma shall have an argument that is a name denoting that declaration. • Immediately within the visible part of a program unit and before any nested declaration (but not within a generic formal part), in which case the argument, if any, shall be a direct_name that denotes the immediately enclosing program unit declaration. 6/2 7/3 8 9 10 1 2 3 4 5/1 255 13 December 2012 The Compilation Process 10.1.4 Ada Reference Manual — 2012 Edition 6 • At the place of a declaration other than the first, of a declarative_part or program unit declaration, in which case the pragma shall have an argument, which shall be a direct_name that denotes one or more of the following (and nothing else): a subprogram_declaration, a generic_subprogram_declaration, or a generic_instantiation, of the same declarative_part or program unit declaration. 7/3 Certain program unit pragmas are defined to be library unit pragmas. If a library unit pragma applies to a program unit, the program unit shall be a library unit. 7.1/1 A library unit pragma that applies to a generic unit does not apply to its instances, unless a specific rule for the pragma specifies the contrary. Static Semantics 8 9/2 Post-Compilation Rules Certain pragmas are defined to be configuration pragmas; they shall appear before the first compilation_unit of a compilation. They are generally used to select a partition-wide or system-wide option. The pragma applies to all compilation_units appearing in the compilation, unless there are none, in which case it applies to all future compilation_units compiled into the same environment. Implementation Permissions An implementation may require that configuration pragmas that select partition-wide or system-wide options be compiled when the environment contains no library_items other than those of the predefined environment. In this case, the implementation shall still accept configuration pragmas in individual compilations that confirm the initially selected partition-wide or system-wide options. 10/1 When applied to a generic unit, a program unit pragma that is not a library unit pragma should apply to each instance of the generic unit for which there is not an overriding pragma applied directly to the instance. Implementation Advice 1 2/2 3 10.1.6 Environment-Level Visibility Rules The normal visibility rules do not apply within a parent_unit_name or a context_clause, nor within a pragma that appears at the place of a compilation unit. The special visibility rules for those contexts are given here. Static Semantics the parent_unit_name at the beginning of an explicit Within library_item, and within a nonlimited_with_clause, the only declarations that are visible are those that are explicit library_items of the environment, and the only declarations that are directly visible are those that are explicit root library_items of the environment. Within a limited_with_clause, the only declarations that are visible are those that are the implicit declaration of the limited view of a library package of the environment, and the only declarations that are directly visible are those that are the implicit declaration of the limited view of a root library package. Within a use_clause or pragma that is within a context_clause, each library_item mentioned in a previous with_clause of the same context_clause is visible, and each root library_item so mentioned is directly visible. In addition, within such a use_clause, if a given declaration is visible or directly visible, each declaration that occurs immediately within the given declaration's visible part is also visible. No other declarations are visible or directly visible. 10.1.5 Pragmas and Program Units 13 December 2012 256 Ada Reference Manual — 2012 Edition Within the parent_unit_name of a subunit, library_items are visible as they are in the parent_unit_name of a library_item; in addition, the declaration corresponding to each body_stub in the environment is also visible. Within a pragma that appears at the place of a compilation unit, the immediately preceding library_item and each of its ancestors is visible. The ancestor root library_item is directly visible. Notwithstanding the rules of 4.1.3, an expanded name in a with_clause, a pragma in a context_clause, or a pragma that appears at the place of a compilation unit may consist of a prefix that denotes a generic package and a selector_name that denotes a child of that generic package. (The child is necessarily a generic unit; see 10.1.1.) 10.2 Program Execution An Ada program consists of a set of partitions, which can execute in parallel with one another, possibly in a separate address space, and possibly on a separate computer. Post-Compilation Rules A partition is a program or part of a program that can be invoked from outside the Ada implementation. For example, on many systems, a partition might be an executable file generated by the system linker. The user can explicitly assign library units to a partition. The assignment is done in an implementation-defined manner. The compilation units included in a partition are those of the explicitly assigned library units, as well as other compilation units needed by those library units. The compilation units needed by a given compilation unit are determined as follows (unless specified otherwise via an implementation-defined pragma, or by some other implementation-defined means): • A compilation unit needs itself; • If a compilation unit is needed, then so are any compilation units upon which it depends semantically; • If a library_unit_declaration is needed, then so is any corresponding library_unit_body; • If a compilation unit with stubs is needed, then so are any corresponding subunits; • If the (implicit) declaration of the limited view of a library package is needed, then so is the explicit declaration of the library package. The user can optionally designate (in an implementation-defined manner) one subprogram as the main subprogram for the partition. A main subprogram, if specified, shall be a subprogram. Each partition has an anonymous environment task, which is an implicit outermost task whose execution elaborates the library_items of the environment declarative_part, and then calls the main subprogram, if there is one. A partition's execution is that of its tasks. The order of elaboration of library units is determined primarily by the elaboration dependences. There is an elaboration dependence of a given library_item upon another if the given library_item or any of its subunits depends semantically on the other library_item. In addition, if a given library_item or any of its subunits has a pragma Elaborate or Elaborate_All that names another library unit, then there is an elaboration dependence of the given library_item upon the body of the other library unit, and, for Elaborate_All only, upon each library_item needed by the declaration of the other library unit. The environment task for a partition has the following structure: task Environment_Task; 4 5 6/2 1 2 3 4 5 6/2 6.1/2 7 8 9 10 11 257 13 December 2012 Environment-Level Visibility Rules 10.1.6 12 13 Ada Reference Manual — 2012 Edition task body Environment_Task is ... (1) -- The environment declarative_part -- (that is, the sequence of library_items) goes here. begin ... (2) -- Call the main subprogram, if there is one. end Environment_Task; The environment declarative_part at (1) is a sequence of declarative_items consisting of copies of the library_items included in the partition. The order of elaboration of library_items is the order in which they appear in the environment declarative_part: 14 • The order of all included library_items is such that there are no forward elaboration dependences. 15/3 • Any included library_unit_declaration for which aspect Elaborate_Body is True (including when a pragma Elaborate_Body applies) is immediately followed by its library_unit_body, if included. 16 17 18 19 20 21 22 23 24 25 26 • All library_items declared pure occur before any that are not declared pure. • All preelaborated library_items occur before any that are not preelaborated. There shall be a total order of the library_items that obeys the above rules. The order is otherwise implementation defined. The full expanded names of the library units and subunits included in a given partition shall be distinct. The sequence_of_statements of the environment task (see (2) above) consists of either: • A call to the main subprogram, if the partition has one. If the main subprogram has parameters, they are passed; where the actuals come from is implementation defined. What happens to the result of a main function is also implementation defined. or: • A null_statement, if there is no main subprogram. The mechanisms for building and running partitions are implementation defined. These might be combined into one operation, as, for example, in dynamic linking, or “load-and-go” systems. Dynamic Semantics The execution of a program consists of the execution of a set of partitions. Further details are implementation defined. The execution of a partition starts with the execution of its environment task, ends when the environment task terminates, and includes the executions of all tasks of the partition. The execution of the (implicit) task_body of the environment task acts as a master for all other tasks created as part of the execution of the partition. When the environment task completes (normally or abnormally), it waits for the termination of all such tasks, and then finalizes any remaining objects of the partition. Bounded (Run-Time) Errors Once the environment task has awaited the termination of all other tasks of the partition, any further attempt to create a task (during finalization) is a bounded error, and may result in the raising of Program_Error either upon creation or activation of the task. If such a task is activated, it is not specified whether the task is awaited prior to termination of the environment task. 27 The implementation shall ensure that all compilation units included in a partition are consistent with one another, and are legal according to the rules of the language. Implementation Requirements 10.2 Program Execution 13 December 2012 258 The kind of partition described in this subclause is known as an active partition. An implementation is allowed to support other kinds of partitions, with implementation-defined semantics. 28/3 Implementation Permissions Ada Reference Manual — 2012 Edition An implementation may restrict the kinds of subprograms it supports as main subprograms. However, an implementation is required to support all main subprograms that are public parameterless library procedures. If the environment task completes abnormally, the implementation may abort any dependent tasks. NOTES 8 An implementation may provide inter-partition communication mechanism(s) via special packages and pragmas. Standard pragmas for distribution and methods for specifying inter-partition communication are defined in Annex E, “Distributed Systems”. If no such mechanisms are provided, then each partition is isolated from all others, and behaves as a program in and of itself. 9 Partitions are not required to run in separate address spaces. For example, an implementation might support dynamic linking via the partition concept. 10 An order of elaboration of library_items that is consistent with the partial ordering defined above does not always ensure that each library_unit_body is elaborated before any other compilation unit whose elaboration necessitates that the library_unit_body be already elaborated. (In particular, there is no requirement that the body of a library unit be elaborated as soon as possible after the library_unit_declaration is elaborated, unless the pragmas in subclause 10.2.1 are used.) 11 A partition (active or otherwise) need not have a main subprogram. In such a case, all the work done by the partition would be done by elaboration of various library_items, and by tasks created by that elaboration. Passive partitions, which cannot have main subprograms, are defined in Annex E, “Distributed Systems”. 10.2.1 Elaboration Control This subclause defines pragmas that help control the elaboration order of library_items. Syntax The form of a pragma Preelaborate is as follows: pragma Preelaborate[(library_unit_name)]; A pragma Preelaborate is a library unit pragma. The form of a pragma Preelaborable_Initialization is as follows: pragma Preelaborable_Initialization(direct_name); Legality Rules An elaborable construct is preelaborable unless its elaboration performs any of the following actions: • The execution of a statement other than a null_statement. • A call to a subprogram other than a static function. • The evaluation of a primary that is a name of an object, unless the name is a static expression, or statically denotes a discriminant of an enclosing type. • The creation of an object (including a component) that is initialized by default, if its type does not have preelaborable initialization. Similarly, the evaluation of an extension_aggregate with an ancestor subtype_mark denoting a subtype of such a type. 29 30 31 32 33 34 1 2 3 4 4.1/2 4.2/2 5 6 7 8 9/3 A generic body is preelaborable only if elaboration of a corresponding instance body would not perform any such actions, presuming that: 10/2 • the actual for each discriminated formal derived type, formal private type, or formal private extension declared within the formal part of the generic unit is a type that does not have 10.1/3 259 13 December 2012 Program Execution 10.2 Ada Reference Manual — 2012 Edition 10.2/2 10.3/2 10.4/2 11/3 preelaborable initialization, unless pragma Preelaborable_Initialization has been applied to the formal type; • • • the actual for each formal type is nonstatic; the actual for each formal object is nonstatic; and the actual for each formal subprogram is a user-defined subprogram. A pragma Preelaborate (or pragma Pure — see below) is used to specify that a library unit is preelaborated, namely that the Preelaborate aspect of the library unit is True; all compilation units of the library unit are preelaborated. The declaration and body of a preelaborated library unit, and all subunits that are elaborated as part of elaborating the library unit, shall be preelaborable. All compilation units of a preelaborated library unit shall depend semantically only on declared pure or preelaborated library_items. In addition to the places where Legality Rules normally apply (see 12.3), these rules also apply in the private part of an instance of a generic unit. If a library unit is preelaborated, then its declaration, if any, and body, if any, are elaborated prior to all nonpreelaborated library_items of the partition. 11.1/2 The following rules specify which entities have preelaborable initialization: 11.2/3 11.3/2 11.4/3 11.5/2 • The partial view of a private type or private extension, a protected type without entry_declarations, a generic formal private type, or a generic formal derived type, has preelaborable initialization if and only if the pragma Preelaborable_Initialization has been applied to them. A protected type with entry_declarations or a task type never has preelaborable initialization. • A component (including a discriminant) of a record or protected type has preelaborable initialization if its declaration includes a default_expression whose execution does not perform any actions prohibited in preelaborable constructs as described above, or if its declaration does not include a default expression and its type has preelaborable initialization. • A derived type has preelaborable initialization if its parent type has preelaborable initialization and if the noninherited components all have preelaborable initialization. However, a controlled type with an Initialize procedure that is not a null procedure does not have preelaborable initialization. • A view of a type has preelaborable initialization if it is an elementary type, an array type whose component type has preelaborable initialization, a record type whose components all have preelaborable initialization, or an interface type. 11.6/2 A pragma Preelaborable_Initialization specifies that a type has preelaborable initialization. This pragma shall appear in the visible part of a package or generic package. 11.7/3 If the pragma appears in the first list of basic_declarative_items of a package_specification, then the direct_name shall denote the first subtype of a composite type, and the type shall be declared immediately within the same package as the pragma. If the pragma is applied to a private type or a private extension, the full view of the type shall have preelaborable initialization. If the pragma is applied to a protected type, the protected type shall not have entries, and each component of the protected type shall have preelaborable initialization. For any other composite type, the type shall have preelaborable initialization. In addition to the places where Legality Rules normally apply (see 12.3), these rules apply also in the private part of an instance of a generic unit. 11.8/2 If the pragma appears in a generic_formal_part, then the direct_name shall denote a generic formal private type or a generic formal derived type declared in the same generic_formal_part as the pragma. In a generic_instantiation the corresponding actual type shall have preelaborable initialization. 10.2.1 Elaboration Control 13 December 2012 260 Ada Reference Manual — 2012 Edition In an implementation, a type declared in a preelaborated package should have the same representation in every elaboration of a given version of the package, whether the elaborations occur in distinct executions of the same program, or in executions of distinct programs or partitions that include the given version. Implementation Advice The form of a pragma Pure is as follows: pragma Pure[(library_unit_name)]; A pragma Pure is a library unit pragma. Syntax Static Semantics A pure compilation unit is a preelaborable compilation unit whose elaboration does not perform any of the following actions: • • • • the elaboration of a variable declaration; the evaluation of an allocator of an access-to-variable type; for the purposes of this rule, the partial view of a type is presumed to have nonvisible components whose default initialization evaluates such an allocator; the elaboration of the declaration of a nonderived named access-to-variable type unless the Storage_Size of the type has been specified by a static expression with value zero or is defined by the language to be zero; the elaboration of the declaration of a nonderived named access-to-constant type for which the Storage_Size has been specified by an expression other than a static expression with value zero. A generic body is pure only if elaboration of a corresponding instance body would not perform any such actions presuming any composite formal types have nonvisible components whose default initialization evaluates an allocator of an access-to-variable type. 12 13 14 15 15.1/3 15.2/2 15.3/2 15.4/3 15.5/3 15.6/3 The Storage_Size for an anonymous access-to-variable type declared at library level in a library unit that is declared pure is defined to be zero. 15.7/2 This paragraph was deleted. Legality Rules A pragma Pure is used to specify that a library unit is declared pure, namely that the Pure aspect of the library unit is True; all compilation units of the library unit are declared pure. In addition, the limited view of any library package is declared pure. The declaration and body of a declared pure library unit, and all subunits that are elaborated as part of elaborating the library unit, shall be pure. All compilation units of a declared pure library unit shall depend semantically only on declared pure library_items. In addition to the places where Legality Rules normally apply (see 12.3), these rules also apply in the private part of an instance of a generic unit. Furthermore, the full view of any partial view declared in the visible part of a declared pure library unit that has any available stream attributes shall support external streaming (see 13.13.2). 16/2 17/3 Implementation Permissions If a library unit is declared pure, then the implementation is permitted to omit a call on a library-level subprogram of the library unit if the results are not needed after the call. In addition, the implementation may omit a call on such a subprogram and simply reuse the results produced by an earlier call on the same subprogram, provided that none of the parameters nor any object accessible via access values from the parameters have any part that is of a type whose full type is an immutably limited type, and the addresses 18/3 261 13 December 2012 Elaboration Control 10.2.1 Ada Reference Manual — 2012 Edition and values of all by-reference actual parameters, the values of all by-copy-in actual parameters, and the values of all objects accessible via access values from the parameters, are the same as they were at the earlier call. This permission applies even if the subprogram produces other side effects when called. Syntax 19 20 21 22 23 24 The form of a pragma Elaborate, Elaborate_All, or Elaborate_Body is as follows: pragma Elaborate(library_unit_name{, library_unit_name}); pragma Elaborate_All(library_unit_name{, library_unit_name}); pragma Elaborate_Body[(library_unit_name)]; A pragma Elaborate or Elaborate_All is only allowed within a context_clause. A pragma Elaborate_Body is a library unit pragma. 25/3 If the aspect Elaborate_Body is True for a declaration (including when pragma Elaborate_Body applies), then the declaration requires a completion (a body). 25.1/2 The library_unit_name of a pragma Elaborate or Elaborate_All shall denote a nonlimited view of a library unit. Legality Rules Static Semantics 26/3 A pragma Elaborate specifies that the body of the named library unit is elaborated before the current library_item. A pragma Elaborate_All specifies that each library_item that is needed by the named library unit declaration is elaborated before the current library_item. 26.1/3 A pragma Elaborate_Body sets the Elaborate_Body representation aspect of the library unit to which it applies to the value True. If the Elaborate_Body aspect of a library unit is True, the body of the library unit is elaborated immediately after its declaration. 27 28 NOTES 12 A preelaborated library unit is allowed to have nonpreelaborable children. 13 A library unit that is declared pure is allowed to have impure children. 10.2.1 Elaboration Control 13 December 2012 262 Ada Reference Manual — 2012 Edition 11 Exceptions This clause defines the facilities for dealing with errors or other exceptional situations that arise during program execution. An exception represents a kind of exceptional situation; an occurrence of such a situation (at run time) is called an exception occurrence. To raise an exception is to abandon normal program execution so as to draw attention to the fact that the corresponding situation has arisen. Performing some actions in response to the arising of an exception is called handling the exception. An exception_declaration declares a name for an exception. An exception can be raised explicitly (for example, by a raise_statement) or implicitly (for example, by the failure of a language-defined check). When an exception arises, control can be transferred to a user-provided exception_handler at the end of a handled_sequence_of_statements, or it can be propagated to a dynamically enclosing execution. 11.1 Exception Declarations An exception_declaration declares a name for an exception. exception_declaration ::= defining_identifier_list : exception [aspect_specification]; Syntax Static Semantics Each single exception_declaration declares a name for a different exception. If a generic unit includes an exception_declaration, the exception_declarations implicitly generated by different instantiations of the generic unit refer to distinct exceptions (but all have the same defining_identifier). The particular exception denoted by an exception name is determined at compilation time and is the same regardless of how many times the exception_declaration is elaborated. The predefined exceptions are the ones declared in the declaration of package Standard: Constraint_Error, Program_Error, Storage_Error, and Tasking_Error; one of them is raised when a language-defined check fails. The elaboration of an exception_declaration has no effect. Dynamic Semantics The execution of any construct raises Storage_Error if there is insufficient storage for that execution. The amount of storage needed for the execution of constructs is unspecified. Examples of user-defined exception declarations: Singular : exception; Error : exception; Overflow, Underflow : exception; Examples 1/3 2/3 1 2/3 3 4 5 6 7 8 263 13 December 2012 Exceptions 11 1 2 3 4 5 6 7 8 9 10 11 12 Ada Reference Manual — 2012 Edition 11.2 Exception Handlers The response to one or more exceptions is specified by an exception_handler. Syntax handled_sequence_of_statements ::= sequence_of_statements [exception exception_handler {exception_handler}] exception_handler ::= when [choice_parameter_specification:] exception_choice {| exception_choice} => sequence_of_statements choice_parameter_specification ::= defining_identifier exception_choice ::= exception_name | others Legality Rules A choice with an exception_name covers the named exception. A choice with others covers all exceptions not named by previous choices of the same handled_sequence_of_statements. Two choices in different exception_handlers of the same handled_sequence_of_statements shall not cover the same exception. A choice with others is allowed only for the last handler of a handled_sequence_of_statements and as the only choice of that handler. An exception_name of a choice shall not denote an exception declared in a generic formal package. A choice_parameter_specification declares a choice parameter, which is a constant object of type Exception_Occurrence (see 11.4.1). During the handling of an exception occurrence, the choice parameter, if any, of the handler represents the exception occurrence that is being handled. Static Semantics The execution of a handled_sequence_of_statements consists of the execution of the sequence_of_- statements. The optional handlers are used to handle any exceptions that are propagated by the sequence_of_statements. Dynamic Semantics Example of an exception handler: Examples begin Open(File, In_File, "input.txt"); -- see A.8.2 exception when E : Name_Error => Put("Cannot open input file : "); Put_Line(Exception_Message(E)); -- see 11.4.1 raise; end; 11.2 Exception Handlers 13 December 2012 264 Ada Reference Manual — 2012 Edition 11.3 Raise Statements A raise_statement raises an exception. raise_statement ::= raise; | raise exception_name [with string_expression]; Syntax Legality Rules The name, if any, in a raise_statement shall denote an exception. A raise_statement with no exception_name (that is, a re-raise statement) shall be within a handler, but not within a body enclosed by that handler. The expression, if any, in a raise_statement, is expected to be of type String. Name Resolution Rules Dynamic Semantics To raise an exception is to raise a new occurrence of that exception, as explained in 11.4. For the execution of a raise_statement with an exception_name, the named exception is raised. If a string_expression is present, the expression is evaluated and its value is associated with the exception occurrence. For the execution of a re-raise statement, the exception occurrence that caused transfer of control to the innermost enclosing handler is raised again. Examples of raise statements: Examples raise Ada.IO_Exceptions.Name_Error; -- see A.13 raise Queue_Error with "Buffer Full"; -- see 9.11 raise; -- re-raise the current exception 11.4 Exception Handling When an exception occurrence is raised, normal program execution is abandoned and control is transferred to an applicable exception_handler, if any. To handle an exception occurrence is to respond to the exceptional event. To propagate an exception occurrence is to raise it again in another context; that is, to fail to respond to the exceptional event in the present context. Dynamic Semantics Within a given task, if the execution of construct a is defined by this International Standard to consist (in part) of the execution of construct b, then while b is executing, the execution of a is said to dynamically enclose the execution of b. The innermost dynamically enclosing execution of a given execution is the dynamically enclosing execution that started most recently. When an exception occurrence is raised by the execution of a given construct, the rest of the execution of that construct is abandoned; that is, any portions of the execution that have not yet taken place are not performed. The construct is first completed, and then left, as explained in 7.6.1. Then: • If the construct is a task_body, the exception does not propagate further; • If the construct is the sequence_of_statements of a handled_sequence_of_statements that has a handler with a choice covering the exception, the occurrence is handled by that handler; 265 13 December 2012 Raise Statements 11.3 1 2/2 3 3.1/2 4/2 5 6/2 7 1 2 3 4 5 Ada Reference Manual — 2012 Edition • Otherwise, the occurrence is propagated to the innermost dynamically enclosing execution, which means that the occurrence is raised again in that context. When an occurrence is handled by a given handler, the choice_parameter_specification, if any, is first elaborated, which creates the choice parameter and initializes it to the occurrence. Then, the sequence_of_statements of the handler is executed; this execution replaces the abandoned portion of the execution of the sequence_of_statements. NOTES 1 Note that exceptions raised in a declarative_part of a body are not handled by the handlers of the handled_- sequence_of_statements of that body. 11.4.1 The Package Exceptions The following language-defined library package exists: Static Semantics with Ada.Streams; package Ada.Exceptions is pragma Preelaborate(Exceptions); type Exception_Id is private; pragma Preelaborable_Initialization(Exception_Id); Null_Id : constant Exception_Id; function Exception_Name(Id : Exception_Id) return String; function Wide_Exception_Name(Id : Exception_Id) return Wide_String; function Wide_Wide_Exception_Name(Id : Exception_Id) return Wide_Wide_String; type Exception_Occurrence is limited private; pragma Preelaborable_Initialization(Exception_Occurrence); type Exception_Occurrence_Access is access all Exception_Occurrence; Null_Occurrence : constant Exception_Occurrence; procedure Raise_Exception(E : in Exception_Id; Message : in String := "") with No_Return; function Exception_Message(X : Exception_Occurrence) return String; procedure Reraise_Occurrence(X : in Exception_Occurrence); function Exception_Identity(X : Exception_Occurrence) return Exception_Id; function Exception_Name(X : Exception_Occurrence) return String; -- Same as Exception_Name(Exception_Identity(X)). function Wide_Exception_Name(X : Exception_Occurrence) return Wide_String; -- Same as Wide_Exception_Name(Exception_Identity(X)). function Wide_Wide_Exception_Name(X : Exception_Occurrence) return Wide_Wide_String; -- Same as Wide_Wide_Exception_Name(Exception_Identity(X)). function Exception_Information(X : Exception_Occurrence) return String; procedure Save_Occurrence(Target : out Exception_Occurrence; Source : in Exception_Occurrence); function Save_Occurrence(Source : Exception_Occurrence) return Exception_Occurrence_Access; procedure Read_Exception_Occurrence (Stream : not null access Ada.Streams.Root_Stream_Type'Class; Item : out Exception_Occurrence); procedure Write_Exception_Occurrence (Stream : not null access Ada.Streams.Root_Stream_Type'Class; Item : in Exception_Occurrence); for Exception_Occurrence'Read use Read_Exception_Occurrence; for Exception_Occurrence'Write use Write_Exception_Occurrence; 6 7 8 1 2/2 3/2 4/3 5/2 6/2 6.1/2 6.2/2 11.4 Exception Handling 13 December 2012 266 Ada Reference Manual — 2012 Edition private ... -- not specified by the language end Ada.Exceptions; Each distinct exception is represented by a distinct value of type Exception_Id. Null_Id does not represent any exception, and is the default initial value of type Exception_Id. Each occurrence of an exception is represented by a value of type Exception_Occurrence. Null_Occurrence does not represent any exception occurrence, and is the default initial value of type Exception_Occurrence. For a prefix E that denotes an exception, the following attribute is defined: E'Identity E'Identity returns the unique identity of the exception. The type of this attribute is Exception_Id. Raise_Exception raises a new occurrence of the identified exception. Exception_Message returns the message associated with the given Exception_Occurrence. For an occurrence raised by a call to Raise_Exception, the message is the Message parameter passed to Raise_Exception. For the occurrence raised by a raise_statement with an exception_name and a string_expression, the message is the string_expression. For the occurrence raised by a raise_statement with an exception_name but without a string_expression, the message is a string giving implementation- defined information about the exception occurrence. For an occurrence originally raised in some other manner (including by the failure of a language-defined check), the message is an unspecified string. In all cases, Exception_Message returns a string with lower bound 1. Reraise_Occurrence reraises the specified exception occurrence. Exception_Identity returns the identity of the exception of the occurrence. The Wide_Wide_Exception_Name functions return the full expanded name of the exception, in upper case, starting with a root library unit. For an exception declared immediately within package Standard, the defining_identifier is returned. The result is implementation defined if the exception is declared within an unnamed block_statement. The Exception_Name functions (respectively, Wide_Exception_Name) return the same sequence of graphic characters as that defined for Wide_Wide_Exception_Name, if all the graphic characters are defined is implementation defined, but no shorter than that returned by Wide_Wide_Exception_Name for the same value of the argument. in Character (respectively, Wide_Character); otherwise, the sequence of characters 6.3/2 7 8/1 9 10/2 10.1/3 10.2/2 11 12/2 12.1/2 The string returned by the Exception_Name, Wide_Exception_Name, and Wide_Wide_Exception_Name functions has lower bound 1. 12.2/2 Exception_Information returns implementation-defined information about the exception occurrence. The returned string has lower bound 1. Reraise_Occurrence has no effect in the case of Null_Occurrence. Raise_Exception and Exception_Name raise Constraint_Error for a Null_Id. Exception_Message, Exception_Name, and Exception_Information raise Constraint_Error for a Null_Occurrence. Exception_Identity applied to Null_Occurrence returns Null_Id. The Save_Occurrence procedure copies the Source to the Target. The Save_Occurrence function uses an allocator of type Exception_Occurrence_Access to create a new object, copies the Source to this new object, and returns an access value designating this new object; the result may be deallocated using an instance of Unchecked_Deallocation. 13/2 14/2 15 267 13 December 2012 The Package Exceptions 11.4.1 Ada Reference Manual — 2012 Edition 15.1/2 Write_Exception_Occurrence writes a representation of an exception occurrence to a stream; Read_Exception_Occurrence reconstructs an exception occurrence from a stream (including one written in a different partition). Paragraph 16 was deleted. 17 18 19 1/3 1.1/3 Implementation Permissions An implementation of Exception_Name in a space-constrained environment may return the defining_- identifier instead of the full expanded name. The string returned by Exception_Message may be truncated (to no less than 200 characters) by the Save_Occurrence procedure (not the function), the Reraise_Occurrence procedure, and the re-raise statement. Implementation Advice Exception_Message (by default) and Exception_Information should produce information useful for debugging. Exception_Message should be short (about one line), whereas Exception_Information can be long. Exception_Message should not include the Exception_Name. Exception_Information should include both the Exception_Name and the Exception_Message. 11.4.2 Pragmas Assert and Assertion_Policy Pragma Assert is used to assert the truth of a boolean expression at a point within a sequence of declarations or statements. Assert pragmas, subtype predicates (see 3.2.4), preconditions and postconditions (see 6.1.1), and type invariants (see 7.3.2) are collectively referred to as assertions; their boolean expressions are referred to as assertion expressions. 1.2/3 Pragma Assertion_Policy is used to control whether assertions are to be ignored by the implementation, checked at run time, or handled in some implementation-defined manner. 2/2 3/2 4/2 5/2 6/2 6.1/3 7/3 8/2 The form of a pragma Assert is as follows: pragma Assert([Check =>] boolean_expression[, [Message =>] string_expression]); A pragma Assert is allowed at the place where a declarative_item or a statement is allowed. Syntax The form of a pragma Assertion_Policy is as follows: pragma Assertion_Policy(policy_identifier); pragma Assertion_Policy( assertion_aspect_mark => policy_identifier {, assertion_aspect_mark => policy_identifier}); A pragma Assertion_Policy is allowed only immediately within a declarative_part, immediately within a package_specification, or as a configuration pragma. The expected type for the boolean_expression of a pragma Assert is any boolean type. The expected type for the string_expression of a pragma Assert is type String. Name Resolution Rules 11.4.1 The Package Exceptions 13 December 2012 268 Ada Reference Manual — 2012 Edition Legality Rules The assertion_aspect_mark of a pragma Assertion_Policy shall be one of Assert, Static_Predicate, Dynamic_Predicate, Pre, Pre'Class, Post, Post'Class, Type_Invariant, Type_Invariant'Class, or some implementation defined aspect_mark. The policy_identifier shall be either Check, Ignore, or some implementation-defined identifier. 9/3 Static Semantics each assertion determines pragma Assertion_Policy the for A pragma_argument_associations whether assertions of the given aspect are to be enforced by a run-time check. The policy_identifier Check requires that assertion expressions of the given aspect be checked that they evaluate to True at the points specified for the given aspect; the policy_identifier Ignore requires that the assertion expression not be evaluated at these points, and the run-time checks not be performed. Note that for subtype predicate aspects (see 3.2.4), even when the applicable Assertion_Policy is Ignore, the predicate will still be evaluated as part of membership tests and Valid attribute_references, and if static, will selection of iteration over loop still have an effect on case_statement_alternatives and variants. subtype, and named aspect the the in 10/3 If no assertion_aspect_marks are specified in the pragma, the specified policy applies to all assertion aspects. 10.1/3 A pragma Assertion_Policy applies to the named assertion aspects in a specific region, and applies to all assertion expressions specified in that region. A pragma Assertion_Policy given in a declarative_part or immediately within a package_specification applies from the place of the pragma to the end of the innermost enclosing declarative region. The region for a pragma Assertion_Policy given as a configuration pragma is the declarative region for the entire compilation unit (or units) to which it applies. 10.2/3 If a pragma Assertion_Policy applies to a generic_instantiation, then the pragma Assertion_Policy applies to the entire instance. 10.3/3 If multiple Assertion_Policy pragmas apply to a given construct for a given assertion aspect, the assertion policy is determined by the one in the innermost enclosing region of a pragma Assertion_Policy specifying a policy for the assertion aspect. If no such Assertion_Policy pragma exists, the policy is implementation defined. 10.4/3 The following language-defined library package exists: package Ada.Assertions is pragma Pure(Assertions); Assertion_Error : exception; procedure Assert(Check : in Boolean); procedure Assert(Check : in Boolean; Message : in String); end Ada.Assertions; A compilation unit containing a check for an assertion (including a pragma Assert) has a semantic dependence on the Assertions library unit. This paragraph was deleted. Dynamic Semantics If performing checks is required by the Assert assertion policy in effect at the place of a pragma Assert, the elaboration of the pragma consists of evaluating the boolean expression, and if the result is False, evaluating the Message argument, if any, and raising the exception Assertions.Assertion_Error, with a message if the Message argument is provided. 11/2 12/2 13/2 14/2 15/2 16/3 17/3 18/3 269 13 December 2012 Pragmas Assert and Assertion_Policy 11.4.2 Ada Reference Manual — 2012 Edition 19/2 20/2 21/2 22/2 Calling the procedure Assertions.Assert without a Message parameter is equivalent to: if Check = False then raise Ada.Assertions.Assertion_Error; end if; Calling the procedure Assertions.Assert with a Message parameter is equivalent to: if Check = False then raise Ada.Assertions.Assertion_Error with Message; end if; 23/2 The procedures Assertions.Assert have these effects independently of the assertion policy in effect. 23.1/3 It is a bounded error to invoke a potentially blocking operation (see 9.5.1) during the evaluation of an assertion expression associated with a call on, or return from, a protected operation. If the bounded error is detected, Program_Error is raised. If not detected, execution proceeds normally, but if it is invoked within a protected action, it might result in deadlock or a (nested) protected action. Bounded (Run-Time) Errors 24/2 Assertion_Error may be declared by renaming an implementation-defined exception from another package. Implementation Permissions 25/2 Implementations may define their own assertion policies. 26/3 27/3 28/2 If the result of a function call in an assertion is not needed to determine the value of the assertion expression, an implementation is permitted to omit the function call. This permission applies even if the function has side effects. An implementation need not allow the specification of an assertion expression if the evaluation of the expression has a side effect such that an immediate reevaluation of the expression could produce a different value. Similarly, an implementation need not allow the specification of an assertion expression that is checked as part of a call on or return from a callable entity C, if the evaluation of the expression has a side effect such that the evaluation of some other assertion expression associated with the same call of (or return from) C could produce a different value than it would if the first expression had not been evaluated. NOTES 2 Normally, the boolean expression in a pragma Assert should not call functions that have significant side effects when the result of the expression is True, so that the particular assertion policy in effect will not affect normal operation of the program. 11.4.2 Pragmas Assert and Assertion_Policy 13 December 2012 270 Ada Reference Manual — 2012 Edition 11.4.3 Example of Exception Handling Examples Exception handling may be used to separate the detection of an error from the response to that error: package File_System is type File_Handle is limited private; File_Not_Found : exception; procedure Open(F : in out File_Handle; Name : String); -- raises File_Not_Found if named file does not exist End_Of_File : exception; procedure Read(F : in out File_Handle; Data : out Data_Type); -- raises End_Of_File if the file is not open ... end File_System; package body File_System is procedure Open(F : in out File_Handle; Name : String) is begin if File_Exists(Name) then ... else raise File_Not_Found with "File not found: " & Name & "."; end if; end Open; procedure Read(F : in out File_Handle; Data : out Data_Type) is begin if F.Current_Position <= F.Last_Position then ... else raise End_Of_File; end if; end Read; ... end File_System; with Ada.Text_IO; with Ada.Exceptions; with File_System; use File_System; use Ada; procedure Main is begin ... -- call operations in File_System exception when End_Of_File => Close(Some_File); when Not_Found_Error : File_Not_Found => Text_IO.Put_Line(Exceptions.Exception_Message(Not_Found_Error)); when The_Error : others => Text_IO.Put_Line("Unknown error:"); if Verbosity_Desired then Text_IO.Put_Line(Exceptions.Exception_Information(The_Error)); else Text_IO.Put_Line(Exceptions.Exception_Name(The_Error)); Text_IO.Put_Line(Exceptions.Exception_Message(The_Error)); end if; raise; end Main; 1 2/2 3 4 5 6/2 7 8 9 10 In the above example, the File_System package contains information about detecting certain exceptional situations, but it does not specify how to handle those situations. Procedure Main specifies how to handle 11 271 13 December 2012 Example of Exception Handling 11.4.3 Ada Reference Manual — 2012 Edition them; other clients of File_System might have different handlers, even though the exceptional situations arise from the same basic causes. 11.5 Suppressing Checks Checking pragmas give instructions to an implementation on handling language-defined checks. A pragma Suppress gives permission to an implementation to omit certain language-defined checks, while a pragma Unsuppress revokes the permission to omit checks.. A language-defined check (or simply, a “check”) is one of the situations defined by this International Standard that requires a check to be made at run time to determine whether some condition is true. A check fails when the condition being checked is False, causing an exception to be raised. The forms of checking pragmas are as follows: pragma Suppress(identifier); pragma Unsuppress(identifier); Syntax A checking pragma is allowed only immediately within a declarative_part, immediately within a package_specification, or as a configuration pragma. The identifier shall be the name of a check. This paragraph was deleted. Legality Rules Static Semantics A checking pragma applies to the named check in a specific region, and applies to all entities in that region. A checking pragma given in a declarative_part or immediately within a package_specification applies from the place of the pragma to the end of the innermost enclosing declarative region. The region for a checking pragma given as a configuration pragma is the declarative region for the entire compilation unit (or units) to which it applies. If a checking pragma applies to a generic_instantiation, then the checking pragma also applies to the entire instance. A pragma Suppress gives permission to an implementation to omit the named check (or every check in the case of All_Checks) for any entities to which it applies. If permission has been given to suppress a given check, the check is said to be suppressed. A pragma Unsuppress revokes the permission to omit the named check (or every check in the case of All_Checks) given by any pragma Suppress that applies at the point of the pragma Unsuppress. The permission is revoked for the region to which the pragma Unsuppress applies. If there is no such permission at the point of a pragma Unsuppress, then the pragma has no effect. A later pragma Suppress can renew the permission. The following are the language-defined checks: • The following checks correspond to situations in which the exception Constraint_Error is raised upon failure. 1/2 2/3 3/2 4/2 4.1/2 5/2 6/2 7/2 7.1/2 7.2/3 8/2 8.1/2 9 10 11.4.3 Example of Exception Handling 13 December 2012 272 Ada Reference Manual — 2012 Edition Access_Check When evaluating a dereference (explicit or implicit), check that the value of the name is not null. When converting to a subtype that excludes null, check that the converted value is not null. Discriminant_Check Check that the discriminants of a composite value have the values imposed by a discriminant constraint. Also, when accessing a record component, check that it exists for the current discriminant values. Division_Check Check that the second operand is not zero for the operations /, rem and mod. Index_Check Check that the bounds of an array value are equal to the corresponding bounds of an index constraint. Also, when accessing a component of an array object, check for each dimension that the given index value belongs to the range defined by the bounds of the array object. Also, when accessing a slice of an array object, check that the given discrete range is compatible with the range defined by the bounds of the array object. Length_Check Check that two arrays have matching components, in the case of array subtype conversions, and logical operators for arrays of boolean components. Overflow_Check Check that a scalar value is within the base range of its type, in cases where the implementation chooses to raise an exception instead of returning the correct mathematical result. Range_Check Check that a scalar value satisfies a range constraint. Also, for the elaboration of a subtype_indication, check that the constraint (if present) is compatible with the subtype denoted by the subtype_mark. Also, for an aggregate, check that an index or discriminant value belongs to the corresponding subtype. Also, check that when the result of an operation yields an array, the value of each component belongs to the component subtype. Tag_Check Check that operand tags in a dispatching call are all equal. Check for the correct tag on tagged type conversions, for an assignment_statement, and when returning a tagged limited object from a function. • The following checks correspond to situations in which the exception Program_Error is raised upon failure. Accessibility_Check Check the accessibility level of an entity or view. Allocation_Check For an allocator, check that the master of any tasks to be created by the allocator is not yet completed or some dependents have not yet terminated, and that the finalization of the collection has not started. Elaboration_Check When a subprogram or protected entry is called, a task activation is accomplished, or a generic instantiation is elaborated, check that the body of the corresponding unit has already been elaborated. This paragraph was deleted. 11/2 12 13/2 14 15 16 17 18 19 19.1/2 19.2/2 20 21/2 273 13 December 2012 Suppressing Checks 11.5 Ada Reference Manual — 2012 Edition 22 23 24 25/3 • The following check corresponds to situations in which the exception Storage_Error is raised upon failure. Storage_Check Check that evaluation of an allocator does not require more space than is available for a storage pool. Check that the space available for a task or subprogram has not been exceeded. • The following check corresponds to all situations in which any predefined exception is raised. All_Checks Represents the union of all checks; suppressing All_Checks suppresses all checks other than those associated with assertions. In addition, an implementation is allowed (but not required) to behave as if a pragma Assertion_Policy(Ignore) applies to any region to which pragma Suppress(All_Checks) applies. 26 If a given check has been suppressed, and the corresponding error situation occurs, the execution of the program is erroneous. Erroneous Execution Implementation Permissions 27/2 An implementation is allowed to place restrictions on checking pragmas, subject only to the requirement that pragma Unsuppress shall allow any check names supported by pragma Suppress. An implementation is allowed to add additional check names, with implementation-defined semantics. When Overflow_Check has been suppressed, an implementation may also suppress an unspecified subset of the Range_Checks. 27.1/2 An implementation may support an additional parameter on pragma Unsuppress similar to the one allowed for pragma Suppress (see J.10). The meaning of such a parameter is implementation-defined. 28 The implementation should minimize the code executed for checks that have been suppressed. Implementation Advice 29 29.1/2 30/2 31/2 NOTES 3 There is no guarantee that a suppressed check is actually removed; hence a pragma Suppress should be used only for efficiency reasons. 4 It is possible to give both a pragma Suppress and Unsuppress for the same check immediately within the same declarative_part. In that case, the last pragma given determines whether or not the check is suppressed. Similarly, it is possible to resuppress a check which has been unsuppressed by giving a pragma Suppress in an inner declarative region. Examples of suppressing and unsuppressing checks: pragma Suppress(Index_Check); pragma Unsuppress(Overflow_Check); Examples 11.5 Suppressing Checks 13 December 2012 274 Ada Reference Manual — 2012 Edition 11.6 Exceptions and Optimization This subclause gives permission to the implementation to perform certain “optimizations” that do not necessarily preserve the canonical semantics. 1/3 Dynamic Semantics The rest of this International Standard (outside this subclause) defines the canonical semantics of the language. The canonical semantics of a given (legal) program determines a set of possible external effects that can result from the execution of the program with given inputs. As explained in 1.1.3, “Conformity of an Implementation with the Standard”, the external effect of a program is defined in terms of its interactions with its external environment. Hence, the implementation can perform any internal actions whatsoever, in any order or in parallel, so long as the external effect of the execution of the program is one that is allowed by the canonical semantics, or by the rules of this subclause. The following additional permissions are granted to the implementation: Implementation Permissions • An implementation need not always raise an exception when a language-defined check fails. Instead, the operation that failed the check can simply yield an undefined result. The exception need be raised by the implementation only if, in the absence of raising it, the value of this undefined result would have some effect on the external interactions of the program. In determining this, the implementation shall not presume that an undefined result has a value that belongs to its subtype, nor even to the base range of its type, if scalar. Having removed the raise of the exception, the canonical semantics will in general allow the implementation to omit the code for the check, and some or all of the operation itself. • If an exception is raised due to the failure of a language-defined check, then upon reaching the corresponding exception_handler (or the termination of the task, if none), the external interactions that have occurred need reflect only that the exception was raised somewhere within the execution of the sequence_of_statements with the handler (or the task_body), possibly earlier (or later if the interactions are independent of the result of the checked operation) than that defined by the canonical semantics, but not within the execution of some abort-deferred operation or independent subprogram that does not dynamically enclose the execution of the construct whose check failed. An independent subprogram is one that is defined outside the library unit containing the construct whose check failed, and for which the Inline aspect is False. Any assignment that occurred outside of such abort-deferred operations or independent subprograms can be disrupted by the raising of the exception, causing the object or its parts to become abnormal, and certain subsequent uses of the object to be erroneous, as explained in 13.9.1. 2/3 3/3 4 5 6/3 NOTES 5 The permissions granted by this subclause can have an effect on the semantics of a program only if the program fails a language-defined check. 7/3 275 13 December 2012 Exceptions and Optimization 11.6 Ada Reference Manual — 2012 Edition 12 Generic Units A generic unit is a program unit that is either a generic subprogram or a generic package. A generic unit is a template, which can be parameterized, and from which corresponding (nongeneric) subprograms or packages can be obtained. The resulting program units are said to be instances of the original generic unit. A generic unit is declared by a generic_declaration. This form of declaration has a generic_formal_part declaring any generic formal parameters. An instance of a generic unit is obtained as the result of a generic_instantiation with appropriate generic actual parameters for the generic formal parameters. An instance of a generic subprogram is a subprogram. An instance of a generic package is a package. Generic units are templates. As templates they do not have the properties that are specific to their nongeneric counterparts. For example, a generic subprogram can be instantiated but it cannot be called. In contrast, an instance of a generic subprogram is a (nongeneric) subprogram; hence, this instance can be called but it cannot be used to produce further instances. 12.1 Generic Declarations A generic_declaration declares a generic unit, which is either a generic subprogram or a generic package. A generic_declaration includes a generic_formal_part declaring any generic formal parameters. A generic formal parameter can be an object; alternatively (unlike a parameter of a subprogram), it can be a type, a subprogram, or a package. generic_declaration ::= generic_subprogram_declaration | generic_package_declaration Syntax generic_subprogram_declaration ::= generic_formal_part subprogram_specification [aspect_specification]; generic_package_declaration ::= generic_formal_part package_specification; generic_formal_part ::= generic {generic_formal_parameter_declaration | use_clause} generic_formal_parameter_declaration ::= formal_object_declaration | formal_type_declaration | formal_subprogram_declaration | formal_package_declaration The only form of subtype_indication allowed within a generic_formal_part is a subtype_mark (that is, the subtype_indication shall not include an explicit constraint). The defining name of a generic subprogram shall be an identifier (not an operator_symbol). Static Semantics A generic_declaration declares a generic unit — a generic package, generic procedure, or generic function, as appropriate. An entity is a generic formal entity if it is declared by a generic_formal_parameter_declaration. “Generic formal,” or simply “formal,” is used as a prefix in referring to objects, subtypes (and types), functions, procedures and packages, that are generic formal entities, as well as to their respective declarations. Examples: “generic formal procedure” or a “formal integer type declaration.” 277 13 December 2012 Generic Units 12 1 2 3 1 2 3/3 4 5 6 7 8/2 9 Ada Reference Manual — 2012 Edition 10 The elaboration of a generic_declaration has no effect. Dynamic Semantics 11 12 13 14 15 16 17 18 19 20 21 22 23 24 NOTES 1 Outside a generic unit a name that denotes the generic_declaration denotes the generic unit. In contrast, within the declarative region of the generic unit, a name that denotes the generic_declaration denotes the current instance. 2 Within a generic subprogram_body, the name of this program unit acts as the name of a subprogram. Hence this name can be overloaded, and it can appear in a recursive call of the current instance. For the same reason, this name cannot appear after the reserved word new in a (recursive) generic_instantiation. 3 A default_expression or default_name appearing in a generic_formal_part is not evaluated during elaboration of the generic_formal_part; instead, it is evaluated when used. (The usual visibility rules apply to any name used in a default: the denoted declaration therefore has to be visible at the place of the expression.) Examples of generic formal parts: Examples generic -- parameterless generic Size : Natural; -- formal object generic Length : Integer := 200; -- formal object with a default expression Area : Integer := Length*Length; -- formal object with a default expression generic type Item is private; -- formal type type Index is (<>); -- formal type type Row is array(Index range <>) of Item; -- formal type with function "<"(X, Y : Item) return Boolean; -- formal subprogram Examples of generic declarations declaring generic subprograms Exchange and Squaring: generic type Elem is private; procedure Exchange(U, V : in out Elem); generic type Item is private; with function "*"(U, V : Item) return Item is <>; function Squaring(X : Item) return Item; Example of a generic declaration declaring a generic package: generic type Item is private; type Vector is array (Positive range <>) of Item; with function Sum(X, Y : Item) return Item; package On_Vectors is function Sum (A, B : Vector) return Vector; function Sigma(A : Vector) return Item; Length_Error : exception; end On_Vectors; 12.1 Generic Declarations 13 December 2012 278 Ada Reference Manual — 2012 Edition 12.2 Generic Bodies The body of a generic unit (a generic body) is a template for the instance bodies. The syntax of a generic body is identical to that of a nongeneric body. Dynamic Semantics The elaboration of a generic body has no other effect than to establish that the generic unit can from then on be instantiated without failing the Elaboration_Check. If the generic body is a child of a generic package, then its elaboration establishes that each corresponding declaration nested in an instance of the parent (see 10.1.1) can from then on be instantiated without failing the Elaboration_Check. NOTES 4 The syntax of generic subprograms implies that a generic subprogram body is always the completion of a declaration. Example of a generic procedure body: Examples procedure Exchange(U, V : in out Elem) is -- see 12.1 T : Elem; -- the generic formal type begin T := U; U := V; V := T; end Exchange; Example of a generic function body: function Squaring(X : Item) return Item is -- see 12.1 begin return X*X; -- the formal operator "*" end Squaring; Example of a generic package body: package body On_Vectors is -- see 12.1 function Sum(A, B : Vector) return Vector is Result : Vector(A'Range); -- the formal type Vector Bias : constant Integer := B'First - A'First; begin if A'Length /= B'Length then raise Length_Error; end if; for N in A'Range loop Result(N) := Sum(A(N), B(N + Bias)); -- the formal function Sum end loop; return Result; end Sum; function Sigma(A : Vector) return Item is Total : Item := A(A'First); -- the formal type Item begin for N in A'First + 1 .. A'Last loop Total := Sum(Total, A(N)); -- the formal function Sum end loop; return Total; end Sigma; end On_Vectors; 1 2 3 4 5 6 7 8 9 10 11 12 279 13 December 2012 Generic Bodies 12.2 Ada Reference Manual — 2012 Edition 12.3 Generic Instantiation 1 An instance of a generic unit is declared by a generic_instantiation. 2/3 3 4 5 6 7/3 8 9/3 Syntax generic_instantiation ::= package defining_program_unit_name is new generic_package_name [generic_actual_part] [aspect_specification]; | [overriding_indicator] procedure defining_program_unit_name is new generic_procedure_name [generic_actual_part] [aspect_specification]; | [overriding_indicator] function defining_designator is new generic_function_name [generic_actual_part] [aspect_specification]; generic_actual_part ::= (generic_association {, generic_association}) generic_association ::= [generic_formal_parameter_selector_name =>] explicit_generic_actual_parameter explicit_generic_actual_parameter ::= expression | variable_name | subprogram_name | entry_name | subtype_mark | package_instance_name A generic_association is named or positional according to whether or not the generic_formal_- parameter_selector_name is specified. Any positional associations shall precede any named associations. The generic actual parameter is either the explicit_generic_actual_parameter given in a generic_- association for each formal, or the corresponding default_expression or default_name if no generic_- association is given for the formal. When the meaning is clear from context, the term “generic actual,” or simply “actual,” is used as a synonym for “generic actual parameter” and also for the view denoted by one, or the value of one. Legality Rules In a generic_instantiation for a particular kind of program unit (package, procedure, or function), the name shall denote a generic unit of the corresponding kind (generic package, generic procedure, or generic function, respectively). The generic_formal_parameter_selector_name of a named generic_association shall denote a generic_formal_parameter_declaration of the generic unit being instantiated. If two or more formal subprograms have the same defining name, then named associations are not allowed for the corresponding actuals. 9.1/3 The generic_formal_parameter_declaration for a positional generic_association is the parameter with the corresponding position in the generic_formal_part of the generic unit being instantiated. 10 A generic_instantiation shall contain at most one generic_association for each formal. Each formal without an association shall have a default_expression or subprogram_default. 12.3 Generic Instantiation 13 December 2012 280 Ada Reference Manual — 2012 Edition In a generic unit Legality Rules are enforced at compile time of the generic_declaration and generic body, given the properties of the formals. In the visible part and formal part of an instance, Legality Rules are enforced at compile time of the generic_instantiation, given the properties of the actuals. In other parts of an instance, Legality Rules are not enforced; this rule does not apply when a given rule explicitly specifies otherwise. Static Semantics A generic_instantiation declares an instance; it is equivalent to the instance declaration (a package_- declaration or subprogram_declaration) immediately followed by the instance body, both at the place of the instantiation. The instance is a copy of the text of the template. Each use of a formal parameter becomes (in the copy) a use of the actual, as explained below. An instance of a generic package is a package, that of a generic procedure is a procedure, and that of a generic function is a function. The interpretation of each construct within a generic declaration or body is determined using the overloading rules when that generic declaration or body is compiled. In an instance, the interpretation of each (copied) construct is the same, except in the case of a name that denotes the generic_declaration or some declaration within the generic unit; the corresponding name in the instance then denotes the corresponding copy of the denoted declaration. The overloading rules do not apply in the instance. In an instance, a generic_formal_parameter_declaration declares a view whose properties are identical to those of the actual, except as specified in 12.4, “Formal Objects” and 12.6, “Formal Subprograms”. Similarly, for a declaration within a generic_formal_parameter_declaration, the corresponding declaration in an instance declares a view whose properties are identical to the corresponding declaration within the declaration of the actual. Implicit declarations are also copied, and a name that denotes an implicit declaration in the generic denotes the corresponding copy in the instance. However, for a type declared within the visible part of the generic, a whole new set of primitive subprograms is implicitly declared for use outside the instance, and may differ from the copied set if the properties of the type in some way depend on the properties of some actual type specified in the instantiation. For example, if the type in the generic is derived from a formal private type, then in the instance the type will inherit subprograms from the corresponding actual type. These new implicit declarations occur immediately after the type declaration in the instance, and override the copied ones. The copied ones can be called only from within the instance; the new ones can be called only from outside the instance, although for tagged types, the body of a new one can be executed by a call to an old one. In the visible part of an instance, an explicit declaration overrides an implicit declaration if they are homographs, as described in 8.3. On the other hand, an explicit declaration in the private part of an instance overrides an implicit declaration in the instance, only if the corresponding explicit declaration in the generic overrides a corresponding implicit declaration in the generic. Corresponding rules apply to the other kinds of overriding described in 8.3. Post-Compilation Rules Recursive generic instantiation is not allowed in the following sense: if a given generic unit includes an instantiation of a second generic unit, then the instance generated by this instantiation shall not include an instance of the first generic unit (whether this instance is generated directly, or indirectly by intermediate instantiations). 11 12 13 14 15 16 17 18 19 281 13 December 2012 Generic Instantiation 12.3 Ada Reference Manual — 2012 Edition 20 21 22 23 24 25 26 27 28 29 Dynamic Semantics For the elaboration of a generic_instantiation, each generic_association is first evaluated. If a default is used, an implicit generic_association is assumed for this rule. These evaluations are done in an arbitrary order, except that the evaluation for a default actual takes place after the evaluation for another actual if the default includes a name that denotes the other one. Finally, the instance declaration and body are elaborated. For the evaluation of a generic_association the generic actual parameter is evaluated. Additional actions are performed in the case of a formal object of mode in (see 12.4). NOTES 5 If a formal type is not tagged, then the type is treated as an untagged type within the generic body. Deriving from such a type in a generic body is permitted; the new type does not get a new tag value, even if the actual is tagged. Overriding operations for such a derived type cannot be dispatched to from outside the instance. Examples of generic instantiations (see 12.1): Examples procedure Swap is new Exchange(Elem => Integer); procedure Swap is new Exchange(Character); -- Swap is overloaded function Square is new Squaring(Integer); -- "*" of Integer used by default function Square is new Squaring(Item => Matrix, "*" => Matrix_Product); function Square is new Squaring(Matrix, Matrix_Product); -- same as previous package Int_Vectors is new On_Vectors(Integer, Table, "+"); Examples of uses of instantiated units: Swap(A, B); A := Square(A); T : Table(1 .. 5) := (10, 20, 30, 40, 50); N : Integer := Int_Vectors.Sigma(T); -- 150 (see 12.2, “Generic Bodies” for the body of Sigma) use Int_Vectors; M : Integer := Sigma(T); -- 150 12.4 Formal Objects 1 A generic formal object can be used to pass a value or variable to a generic unit. 2/3 3 4 5/2 Syntax formal_object_declaration ::= defining_identifier_list : mode [null_exclusion] subtype_mark [:= default_expression] [aspect_specification]; | defining_identifier_list : mode access_definition [:= default_expression] [aspect_specification]; Name Resolution Rules The expected type for the default_expression, if any, of a formal object is the type of the formal object. For a generic formal object of mode in, the expected type for the actual is the type of the formal. For a generic formal object of mode in out, the type of the actual shall resolve to the type determined by the subtype_mark, or for a formal_object_declaration with an access_definition, to a specific anonymous access type. If the anonymous access type is an access-to-object type, the type of the actual shall have the same designated type as that of the access_definition. If the anonymous access type is an access-to- 12.3 Generic Instantiation 13 December 2012 282 Ada Reference Manual — 2012 Edition subprogram type, the type of the actual shall have a designated profile which is type conformant with that of the access_definition. Legality Rules If a generic formal object has a default_expression, then the mode shall be in (either explicitly or by default); otherwise, its mode shall be either in or in out. For a generic formal object of mode in, the actual shall be an expression. For a generic formal object of mode in out, the actual shall be a name that denotes a variable for which renaming is allowed (see 8.5.1). In the case where the type of the formal is defined by an access_definition, the type of the actual and the type of the formal: • shall both be access-to-object types with statically matching designated subtypes and with both or neither being access-to-constant types; or • shall both be access-to-subprogram types with subtype conformant designated profiles. For a formal_object_declaration with a null_exclusion or an access_definition that has a null_exclusion: • if the actual matching the formal_object_declaration denotes the generic formal object of another generic unit G, and the instantiation containing the actual occurs within the body of G or within the body of a generic unit declared within the declarative region of G, then the declaration of the formal object of G shall have a null_exclusion; • otherwise, the subtype of the actual matching the formal_object_declaration shall exclude null. In addition to the places where Legality Rules normally apply (see 12.3), this rule applies also in the private part of an instance of a generic unit. Static Semantics A formal_object_declaration declares a generic formal object. The default mode is in. For a formal object of mode in, the nominal subtype is the one denoted by the subtype_mark or access_definition in the declaration of the formal. For a formal object of mode in out, its type is determined by the subtype_mark or access_definition in the declaration; its nominal subtype is nonstatic, even if the subtype_mark denotes a static subtype; for a composite type, its nominal subtype is unconstrained if the first subtype of the type is unconstrained, even if the subtype_mark denotes a constrained subtype. In an instance, a formal_object_declaration of mode in is a full constant declaration and declares a new stand-alone a formal_object_declaration of mode in out declares a view whose properties are identical to those of the actual. constant object whose actual, whereas initialization expression the is Dynamic Semantics For the evaluation of a generic_association for a formal object of mode in, a constant object is created, the value of the actual parameter is converted to the nominal subtype of the formal object, and assigned to the object, including any value adjustment — see 7.6. NOTES 6 The constraints that apply to a generic formal object of mode in out are those of the corresponding generic actual parameter (not those implied by the subtype_mark that appears in the formal_object_declaration). Therefore, to avoid confusion, it is recommended that the name of a first subtype be used for the declaration of such a formal object. 283 13 December 2012 Formal Objects 12.4 6 7 8/2 8.1/2 8.2/2 8.3/2 8.4/2 8.5/2 9/2 10/2 11 12 Ada Reference Manual — 2012 Edition 12.5 Formal Types 1/2 A generic formal subtype can be used to pass to a generic unit a subtype whose type is in a certain category of types. 2/3 2.1/3 2.2/3 3/2 4 5 6/3 formal_type_declaration ::= formal_complete_type_declaration | formal_incomplete_type_declaration Syntax formal_complete_type_declaration ::= type defining_identifier[discriminant_part] is formal_type_definition [aspect_specification]; formal_incomplete_type_declaration ::= type defining_identifier[discriminant_part] [is tagged]; formal_type_definition ::= formal_private_type_definition | formal_derived_type_definition | formal_discrete_type_definition | formal_signed_integer_type_definition | formal_modular_type_definition | formal_floating_point_definition | formal_ordinary_fixed_point_definition | formal_decimal_fixed_point_definition | formal_array_type_definition | formal_access_type_definition | formal_interface_type_definition For a generic formal subtype, the actual shall be a subtype_mark; it denotes the (generic) actual subtype. Legality Rules A formal_type_declaration declares a (generic) formal type, and its first subtype, the (generic) formal subtype. Static Semantics The form of a formal_type_definition determines a category (of types) to which the formal type belongs. For a formal_private_type_definition the reserved words tagged and limited indicate the category of types (see 12.5.1). The a formal_incomplete_type_declaration. For a formal_derived_type_definition the category of types is the derivation class rooted at the ancestor type. For other formal types, the name of the syntactic category indicates the category of types; a formal_discrete_type_definition defines a discrete type, and so on. reserved word also plays case of tagged role this the in 7/2 The actual type shall be in the category determined for the formal. Legality Rules 8/3 The formal type also belongs to each category that contains the determined category. The primitive subprograms of the type are as for any type in the determined category. For a formal type other than a formal derived type, these are the predefined operators of the type. For an elementary formal type, the predefined operators are implicitly declared immediately after the declaration of the formal type. For a Static Semantics 12.5 Formal Types 13 December 2012 284 Ada Reference Manual — 2012 Edition composite formal type, the predefined operators are implicitly declared either immediately after the declaration of the formal type, or later immediately within the declarative region in which the type is declared according to the rules of 7.3.1. In an instance, the copy of such an implicit declaration declares a view of the predefined operator of the actual type, even if this operator has been overridden for the actual type and even if it is never declared for the actual type. The rules specific to formal derived types are given in 12.5.1. NOTES 7 Generic formal types, like all types, are not named. Instead, a name can denote a generic formal subtype. Within a generic unit, a generic formal type is considered as being distinct from all other (formal or nonformal) types. 8 A discriminant_part is allowed only for certain kinds of types, and therefore only for certain kinds of generic formal types. See 3.7. Examples of generic formal types: Examples type Item is private; type Buffer(Length : Natural) is limited private; type Enum is (<>); type Int is range <>; type Angle is delta <>; type Mass is digits <>; type Table is array (Enum) of Item; Example of a generic formal part declaring a formal integer type: generic type Rank is range <>; First : Rank := Rank'First; Second : Rank := First + 1; -- the operator "+" of the type Rank 12.5.1 Formal Private and Derived Types In its most general form, the category determined for a formal private type is all types, but the category can be restricted to only nonlimited types or to only tagged types. Similarly, the category for a formal incomplete type is all types but the category can be restricted to only tagged types; unlike other formal types, the actual type does not need to be able to be frozen (see 13.14). The category determined for a formal derived type is the derivation class rooted at the ancestor type. formal_private_type_definition ::= [[abstract] tagged] [limited] private formal_derived_type_definition ::= [abstract] [limited | synchronized] new subtype_mark [[and interface_list]with private] Syntax Legality Rules If a generic formal type declaration has a known_discriminant_part, then it shall not include a default_expression for a discriminant. The ancestor subtype of a formal derived type is the subtype denoted by the subtype_mark of the formal_derived_type_definition. For a formal derived type declaration, the reserved words with private shall appear if and only if the ancestor type is a tagged type; in this case the formal derived type is a private extension of the ancestor type and the ancestor shall not be a class-wide type. Similarly, an interface_list or the optional reserved words abstract or synchronized shall appear only if the ancestor type is a tagged type. The reserved word limited or synchronized shall appear only if the ancestor type 285 13 December 2012 Formal Types 12.5 9 10 11 12 13 14 15 16 1/3 2 3/2 4 5/3 Ada Reference Manual — 2012 Edition and any progenitor types are limited types. The reserved word synchronized shall appear (rather than limited) if the ancestor type or any of the progenitor types are synchronized interfaces. The ancestor type shall be a limited interface if the reserved word synchronized appears. 5.1/3 The actual type for a formal derived type shall be a descendant of the ancestor type and every progenitor of the formal type. If the formal type is nonlimited, the actual type shall be nonlimited. If the reserved word synchronized appears in the declaration of the formal derived type, the actual type shall be a synchronized tagged type. 6/3 If a formal private or derived subtype is definite, then the actual subtype shall also be definite. 6.1/3 A formal_incomplete_type_declaration declares a formal incomplete type. The only view of a formal incomplete type is an incomplete view. Thus, a formal incomplete type is subject to the same usage restrictions as any other incomplete type — see 3.10.1. 7 8 9 10 For a generic formal derived type with no discriminant_part: • If the ancestor subtype is constrained, the actual subtype shall be constrained, and shall be statically compatible with the ancestor; • If the ancestor subtype is an unconstrained access or composite subtype, the actual subtype shall be unconstrained. • If the ancestor subtype is an unconstrained discriminated subtype, then the actual shall have the same number of discriminants, and each discriminant of the actual shall correspond to a discriminant of the ancestor, in the sense of 3.7. 10.1/2 • If the ancestor subtype is an access subtype, the actual subtype shall exclude null if and only if the ancestor subtype excludes null. 11/3 The declaration of a formal derived type shall not have a known_discriminant_part. For a generic formal private or incomplete type with a known_discriminant_part: 12 13 14 15 16/2 17/2 • The actual type shall be a type with the same number of discriminants. • The actual subtype shall be unconstrained. • The subtype of each discriminant of the actual type shall statically match the subtype of the corresponding discriminant of the formal type. For a generic formal type with an unknown_discriminant_part, the actual may, but need not, have discriminants, and may be definite or indefinite. The category determined for a formal private type is as follows: Type Definition Determined Category Static Semantics limited private private tagged limited private tagged private the category of all types the category of all nonlimited types the category of all tagged types the category of all nonlimited tagged types 18 The presence of the reserved word abstract determines whether the actual type may be abstract. 18.1/3 The category determined for a formal incomplete type is the category of all types, unless the formal_type_declaration includes the reserved word tagged; in this case, it is the category of all tagged types. 12.5.1 Formal Private and Derived Types 13 December 2012 286 Ada Reference Manual — 2012 Edition A formal private or derived type is a private or derived type, respectively. A formal derived tagged type is a private extension. A formal private or derived type is abstract if the reserved word abstract appears in its declaration. For a formal derived type, the characteristics (including components, but excluding discriminants if there is a new discriminant_part), predefined operators, and inherited user-defined primitive subprograms are determined by its ancestor type and its progenitor types (if any), in the same way that those of a derived type are determined by those of its parent type and its progenitor types (see 3.4 and 7.3.1). In an instance, the copy of an implicit declaration of a primitive subprogram of a formal derived type declares a view of the corresponding primitive subprogram of the ancestor or progenitor of the formal derived type, even if this primitive has been overridden for the actual type and even if it is never declared for the actual type. When the ancestor or progenitor of the formal derived type is itself a formal type, the copy of the implicit declaration declares a view of the corresponding copied operation of the ancestor or progenitor. In the case of a formal private extension, however, the tag of the formal type is that of the actual type, so if the tag in a call is statically determined to be that of the formal type, the body executed will be that corresponding to the actual type. For a prefix S that denotes a formal indefinite subtype, the following attribute is defined: S'Definite S'Definite yields True if the actual subtype corresponding to S is definite; otherwise, it yields False. The value of this attribute is of the predefined type Boolean. Dynamic Semantics In the case where a formal type has unknown discriminants, and the actual type is a class-wide type T'Class: • For the purposes of defining the primitive operations of the formal type, each of the primitive operations of the actual type is considered to be a subprogram (with an intrinsic calling convention — see 6.3.1) whose body consists of a dispatching call upon the corresponding operation of T, with its formal parameters as the actual parameters. If it is a function, the result of the dispatching call is returned. • If the corresponding operation of T has no controlling formal parameters, then the controlling tag value is determined by the context of the call, according to the rules for tag-indeterminate calls (see 3.9.2 and 5.2). In the case where the tag would be statically determined to be that of the formal type, the call raises Program_Error. If such a function is renamed, any call on the renaming raises Program_Error. NOTES 9 In accordance with the general rule that the actual type shall belong to the category determined for the formal (see 12.5, “Formal Types”): If the formal type is nonlimited, then so shall be the actual; • • For a formal derived type, the actual shall be in the class rooted at the ancestor subtype. 10 The actual type can be abstract only if the formal type is abstract (see 3.9.3). 11 If the formal has a discriminant_part, the actual can be either definite or indefinite. Otherwise, the actual has to be definite. 19 20/3 21/3 22/1 23/3 23.1/3 23.2/2 23.3/2 24/2 25 26 27 28 287 13 December 2012 Formal Private and Derived Types 12.5.1 Ada Reference Manual — 2012 Edition 12.5.2 Formal Scalar Types 1/2 A formal scalar type is one defined by any of the formal_type_definitions in this subclause. The category determined for a formal scalar type is the category of all discrete, signed integer, modular, floating point, ordinary fixed point, or decimal types. 2 3 4 5 6 7 8 9 Syntax formal_discrete_type_definition ::= (<>) formal_signed_integer_type_definition ::= range <> formal_modular_type_definition ::= mod <> formal_floating_point_definition ::= digits <> formal_ordinary_fixed_point_definition ::= delta <> formal_decimal_fixed_point_definition ::= delta <> digits <> The actual type for a formal scalar type shall not be a nonstandard numeric type. Legality Rules NOTES 12 The actual type shall be in the class of types implied by the syntactic category of the formal type definition (see 12.5, “Formal Types”). For example, the actual for a formal_modular_type_definition shall be a modular type. 12.5.3 Formal Array Types 1/2 The category determined for a formal array type is the category of all array types. formal_array_type_definition ::= array_type_definition Syntax Legality Rules The only form of discrete_subtype_definition that is allowed within the declaration of a generic formal (constrained) array subtype is a subtype_mark. For a formal array subtype, the actual subtype shall satisfy the following conditions: • The formal array type and the actual array type shall have the same dimensionality; the formal subtype and the actual subtype shall be either both constrained or both unconstrained. • For each index position, the index types shall be the same, and the index subtypes (if unconstrained), or the index ranges (if constrained), shall statically match (see 4.9.1). • The component subtypes of the formal and actual array types shall statically match. • If the formal type has aliased components, then so shall the actual. 2 3 4 5 6 7 8 9 10 Example of formal array types: -- given the generic package Examples 12.5.2 Formal Scalar Types 13 December 2012 288 Ada Reference Manual — 2012 Edition generic type Item is private; type Index is (<>); type Vector is array (Index range <>) of Item; type Table is array (Index) of Item; package P is ... end P; -- and the types type Mix is array (Color range <>) of Boolean; type Option is array (Color) of Boolean; -- then Mix can match Vector and Option can match Table package R is new P(Item => Boolean, Index => Color, Vector => Mix, Table => Option); -- Note that Mix cannot match Table and Option cannot match Vector 12.5.4 Formal Access Types The category determined for a formal access type is the category of all access types. formal_access_type_definition ::= access_type_definition Syntax Legality Rules For a formal access-to-object type, the designated subtypes of the formal and actual types shall statically match. If and only if the general_access_modifier constant applies to the formal, the actual shall be an access- to-constant type. If the general_access_modifier all applies to the formal, then the actual shall be a general access-to-variable type (see 3.10). If and only if the formal subtype excludes null, the actual subtype shall exclude null. 11 12 13 14 15 16 1/2 2 3 4/2 For a formal access-to-subprogram subtype, the designated profiles of the formal and the actual shall be subtype conformant. 5/3 Example of formal access types: Examples -- the formal types of the generic package generic type Node is private; type Link is access Node; package P is ... end P; -- can be matched by the actual types type Car; type Car_Name is access Car; type Car is record Pred, Succ : Car_Name; Number : License_Number; Owner : Person; end record; -- in the following generic instantiation 6 7 8 9 10 11 12 289 13 December 2012 Formal Array Types 12.5.3 Ada Reference Manual — 2012 Edition 13 package R is new P(Node => Car, Link => Car_Name); 12.5.5 Formal Interface Types 1/2 The category determined for a formal interface type is the category of all interface types. 2/2 3/2 4/2 5/2 6/2 formal_interface_type_definition ::= interface_type_definition Syntax The actual type shall be a descendant of every progenitor of the formal type. Legality Rules The actual type shall be a limited, task, protected, or synchronized interface if and only if the formal type is also, respectively, a limited, task, protected, or synchronized interface. Examples type Root_Work_Item is tagged private; generic type Managed_Task is task interface; type Work_Item(<>) is new Root_Work_Item with private; package Server_Manager is task type Server is new Managed_Task with entry Start(Data : in out Work_Item); end Server; end Server_Manager; 7/2 This generic allows an application to establish a standard interface that all tasks need to implement so they can be managed appropriately by an application-specific scheduler. 12.6 Formal Subprograms 1 Formal subprograms can be used to pass callable entities to a generic unit. 2/2 2.1/3 2.2/3 3/2 4 4.1/2 5 6 formal_subprogram_declaration ::= formal_concrete_subprogram_declaration | formal_abstract_subprogram_declaration Syntax formal_concrete_subprogram_declaration ::= with subprogram_specification [is subprogram_default] [aspect_specification]; formal_abstract_subprogram_declaration ::= with subprogram_specification is abstract [subprogram_default] [aspect_specification]; subprogram_default ::= default_name | <> | null default_name ::= name A subprogram_default of null shall not be specified for a formal function or for a formal_abstract_subprogram_declaration. The expected profile for the default_name, if any, is that of the formal subprogram. Name Resolution Rules For a generic formal subprogram, the expected profile for the actual is that of the formal subprogram. 12.5.4 Formal Access Types 13 December 2012 290 Ada Reference Manual — 2012 Edition The profiles of the formal and any named default shall be mode conformant. The profiles of the formal and actual shall be mode conformant. Legality Rules 7/3 8/3 For a parameter or result subtype of a formal_subprogram_declaration that has an explicit null_exclusion: 8.1/2 • if the actual matching the formal_subprogram_declaration denotes a generic formal object of another generic unit G, and the instantiation containing the actual that occurs within the body of a generic unit G or within the body of a generic unit declared within the declarative region of the generic unit G, then the corresponding parameter or result type of the formal subprogram of G shall have a null_exclusion; • otherwise, the subtype of the corresponding parameter or result type of the actual matching the formal_subprogram_declaration shall exclude null. In addition to the places where Legality Rules normally apply (see 12.3), this rule applies also in the private part of an instance of a generic unit. If a formal parameter of a formal_abstract_subprogram_declaration is of a specific tagged type T or of an anonymous access type designating a specific tagged type T, T is called a controlling type of the formal_abstract_subprogram_declaration. Similarly, if the result of a formal_abstract_subprogram_- declaration for a function is of a specific tagged type T or of an anonymous access type designating a specific tagged type T, T is called a controlling type of the formal_abstract_subprogram_declaration. A formal_abstract_subprogram_declaration shall have exactly one controlling type, and that type shall not be incomplete. 8.2/2 8.3/2 8.4/3 The actual subprogram for a formal_abstract_subprogram_declaration shall be a dispatching operation of the controlling type or of the actual type corresponding to the controlling type. 8.5/2 Static Semantics A formal_subprogram_declaration declares a generic formal subprogram. The types of the formal parameters and result, if any, of the formal subprogram are those determined by the subtype_marks given in the formal_subprogram_declaration; however, independent of the particular subtypes that are denoted by the subtype_marks, the nominal subtypes of the formal parameters and result, if any, are defined to be nonstatic, and unconstrained if of an array type (no applicable index constraint is provided in a call on a formal subprogram). In an instance, a formal_subprogram_declaration declares a view of the actual. The profile of this view takes its subtypes and calling convention from the original profile of the actual entity, while taking the formal parameter names and default_expressions from the profile given in the formal_- subprogram_declaration. The view is a function or procedure, never an entry. If a subtype_mark in the profile of the formal_subprogram_declaration denotes a formal private or formal derived type and the actual type for this formal type is a class-wide type T'Class, then for the purposes of resolving the corresponding actual subprogram at the point of the instantiation, certain implicit declarations may be available as possible resolutions as follows: For each primitive subprogram of T that is directly visible at the point of the instantiation, and that has at least one controlling formal parameter, a corresponding implicitly declared subprogram with the same defining name, and having the same profile as the primitive subprogram except that T is systematically replaced by T'Class in the types of its profile, is potentially use-visible. The body of such a subprogram is as defined in 12.5.1 for primitive subprograms of a formal type when the actual type is class-wide. 9 9.1/3 9.2/3 291 13 December 2012 Formal Subprograms 12.6 Ada Reference Manual — 2012 Edition 10 If a generic unit has a subprogram_default specified by a box, and the corresponding actual parameter is omitted, then it is equivalent to an explicit actual parameter that is a usage name identical to the defining name of the formal. 10.1/2 If a generic unit has a subprogram_default specified by the reserved word null, and the corresponding actual parameter is omitted, then it is equivalent to an explicit actual parameter that is a null procedure having the profile given in the formal_subprogram_declaration. 10.2/2 The subprogram declared by a formal_abstract_subprogram_declaration with a controlling type T is a dispatching operation of type T. 11 12 13 14 15 16/2 16.1/2 NOTES 13 The matching rules for formal subprograms state requirements to subprogram_renaming_declarations (see 8.5.4). In particular, the name of a parameter of the formal subprogram need not be the same as that of the corresponding parameter of the actual subprogram; similarly, for these parameters, default_expressions need not correspond. that are similar those applying to 14 The constraints that apply to a parameter of a formal subprogram are those of the corresponding formal parameter of the matching actual subprogram (not those implied by the corresponding subtype_mark in the _specification of the formal subprogram). A similar remark applies to the result of a function. Therefore, to avoid confusion, it is recommended that the name of a first subtype be used in any declaration of a formal subprogram. 15 The subtype specified for a formal parameter of a generic formal subprogram can be any visible subtype, including a generic formal subtype of the same generic_formal_part. 16 A formal subprogram is matched by an attribute of a type if the attribute is a function with a matching specification. An enumeration literal of a given type matches a parameterless formal function whose result type is the given type. 17 A default_name denotes an entity that is visible or directly visible at the place of the generic_declaration; a box used as a default is equivalent to a name that denotes an entity that is directly visible at the place of the _instantiation. 18 The actual subprogram cannot be abstract unless the formal subprogram is a formal_abstract_subprogram_- declaration (see 3.9.3). 19 The subprogram declared by a formal_abstract_subprogram_declaration is an abstract subprogram. All calls on a subprogram declared by a formal_abstract_subprogram_declaration must be dispatching calls. See 3.9.3. 16.2/2 20 A null procedure as a subprogram default has convention Intrinsic (see 6.3.1). 17 Examples of generic formal subprograms: Examples 18/2 19 20 21 22 23 24 with function "+"(X, Y : Item) return Item is <>; with function Image(X : Enum) return String is Enum'Image; with procedure Update is Default_Update; with procedure Pre_Action(X : in Item) is null; -- defaults to no action with procedure Write(S : not null access Root_Stream_Type'Class; Desc : Descriptor) is abstract Descriptor'Write; -- see 13.13.2 -- Dispatching operation on Descriptor with default -- given the generic procedure declaration generic with procedure Action (X : in Item); procedure Iterate(Seq : in Item_Sequence); -- and the procedure procedure Put_Item(X : in Item); -- the following instantiation is possible procedure Put_List is new Iterate(Action => Put_Item); 12.6 Formal Subprograms 13 December 2012 292 Ada Reference Manual — 2012 Edition 12.7 Formal Packages Formal packages can be used to pass packages to a generic unit. The formal_package_declaration declares that the formal package is an instance of a given generic package. Upon instantiation, the actual package has to be an instance of that generic package. Syntax formal_package_declaration ::= with package defining_identifier is new generic_package_name formal_package_actual_part [aspect_specification]; formal_package_actual_part ::= ([others =>] <>) | [generic_actual_part] | (formal_package_association {, formal_package_association} [, others => <>]) formal_package_association ::= generic_association | generic_formal_parameter_selector_name => <> Any positional formal_package_associations shall precede any named formal_package_associations. Legality Rules 1 2/3 3/2 3.1/2 3.2/2 The generic_package_name shall denote a generic package (the template for the formal package); the formal package is an instance of the template. 4 The generic_formal_parameter_selector_name of a formal_package_association shall denote a generic_formal_parameter_declaration of the template. If two or more formal subprograms of the template have the same defining name, then named associations are not allowed for the corresponding actuals. A formal_package_actual_part shall contain at most one formal_package_association for each formal parameter. If the formal_package_actual_part does not include “others => <>”, each formal parameter without an association shall have a default_expression or subprogram_default. The rules for matching between formal_package_associations and the generic formals of the template are as follows: • If all of the the explicit_generic_actual_parameters of the formal_package_associations shall be legal for an instantiation of the template. formal_package_associations are given by generic associations, • If a formal_package_association for a formal type T of the template is given by <>, then the formal_package_association for any other generic_formal_parameter_declaration of the template that mentions T directly or indirectly must be given by <> as well. The actual shall be an instance of the template. If the formal_package_actual_part is (<>) or (others => <>), then the actual may be any instance of the template; otherwise, certain of the actual parameters of the actual instance shall match the corresponding actual parameters of the formal package, determined as follows: • If the formal_package_actual_part includes generic_associations as well as associations with <>, then only the actual parameters specified explicitly with generic_associations are required to match; 293 13 December 2012 Formal Packages 12.7 4.1/3 4.2/3 4.3/3 4.4/3 4.5/3 5/2 5.1/2 Ada Reference Manual — 2012 Edition 5.2/2 • Otherwise, all actual parameters shall match, whether any actual parameter is given explicitly or by default. 5.3/2 The rules for matching of actual parameters between the actual instance and the formal package are as follows: 6/2 • For a formal object of mode in, the actuals match if they are static expressions with the same value, or if they statically denote the same constant, or if they are both the literal null. 7 8 8.1/1 • For a formal subtype, the actuals match if they denote statically matching subtypes. • For other kinds of formals, the actuals match if they statically denote the same entity. For the purposes of matching, any actual parameter that is the name of a formal object of mode in is replaced by the formal object's actual expression (recursively). 9 A formal_package_declaration declares a generic formal package. Static Semantics 10/2 The visible part of a formal package includes the first list of basic_declarative_items of the package_- specification. In addition, for each actual parameter that is not required to match, a copy of the declaration of the corresponding formal parameter of the template is included in the visible part of the formal package. If the copied declaration is for a formal type, copies of the implicit declarations of the primitive subprograms of the formal type are also included in the visible part of the formal package. 11/2 For the purposes of matching, if the actual instance A is itself a formal package, then the actual parameters of A are those specified explicitly or implicitly in the formal_package_actual_part for A, plus, for those not specified, the copies of the formal parameters of the template included in the visible part of A. 12/2 13/2 14/2 15/2 16/2 17/2 18/2 19/2 20/2 21/2 22/2 Examples Example of a generic package with formal package parameters: with Ada.Containers.Ordered_Maps; -- see A.18.6 generic with package Mapping_1 is new Ada.Containers.Ordered_Maps(<>); with package Mapping_2 is new Ada.Containers.Ordered_Maps (Key_Type => Mapping_1.Element_Type, others => <>); package Ordered_Join is -- Provide a "join" between two mappings subtype Key_Type is Mapping_1.Key_Type; subtype Element_Type is Mapping_2.Element_Type; function Lookup(Key : Key_Type) return Element_Type; ... end Ordered_Join; Example of an instantiation of a package with formal packages: with Ada.Containers.Ordered_Maps; package Symbol_Package is type String_Id is ... type Symbol_Info is ... package String_Table is new Ada.Containers.Ordered_Maps (Key_Type => String, Element_Type => String_Id); package Symbol_Table is new Ada.Containers.Ordered_Maps (Key_Type => String_Id, Element_Type => Symbol_Info); 12.7 Formal Packages 13 December 2012 294 Ada Reference Manual — 2012 Edition package String_Info is new Ordered_Join(Mapping_1 => String_Table, Mapping_2 => Symbol_Table); Apple_Info : constant Symbol_Info := String_Info.Lookup("Apple"); end Symbol_Package; 23/2 24/2 25/2 12.8 Example of a Generic Package The following example provides a possible formulation of stacks by means of a generic package. The size of each stack and the type of the stack elements are provided as generic formal parameters. 1 This paragraph was deleted. Examples generic Size : Positive; type Item is private; package Stack is procedure Push(E : in Item); procedure Pop (E : out Item); Overflow, Underflow : exception; end Stack; package body Stack is type Table is array (Positive range <>) of Item; Space : Table(1 .. Size); Index : Natural := 0; procedure Push(E : in Item) is begin if Index >= Size then raise Overflow; end if; Index := Index + 1; Space(Index) := E; end Push; procedure Pop(E : out Item) is begin if Index = 0 then raise Underflow; end if; E := Space(Index); Index := Index - 1; end Pop; end Stack; Instances of this generic package can be obtained as follows: package Stack_Int is new Stack(Size => 200, Item => Integer); package Stack_Bool is new Stack(100, Boolean); Thereafter, the procedures of the instantiated packages can be called as follows: Stack_Int.Push(N); Stack_Bool.Push(True); 2/1 3 4 5 6 7 8 9 10 11 12 295 13 December 2012 Formal Packages 12.7 13 14 15 16 Ada Reference Manual — 2012 Edition Alternatively, a generic formulation of the type Stack can be given as follows (package body omitted): generic type Item is private; package On_Stacks is type Stack(Size : Positive) is limited private; procedure Push(S : in out Stack; E : in Item); procedure Pop (S : in out Stack; E : out Item); Overflow, Underflow : exception; private type Table is array (Positive range <>) of Item; type Stack(Size : Positive) is record Space : Table(1 .. Size); Index : Natural := 0; end record; end On_Stacks; In order to use such a package, an instance has to be created and thereafter stacks of the corresponding type can be declared: declare package Stack_Real is new On_Stacks(Real); use Stack_Real; S : Stack(100); begin ... Push(S, 2.54); ... end; 12.8 Example of a Generic Package 13 December 2012 296 Ada Reference Manual — 2012 Edition 13 Representation Issues This clause describes features for querying and controlling certain aspects of entities and for interfacing to hardware. 1/3 13.1 Operational and Representation Aspects Two kinds of aspects of entities can be specified: representation aspects and operational aspects. Representation aspects affect how the types and other entities of the language are to be mapped onto the underlying machine. Operational aspects determine other properties of entities. Either kind of aspect of an entity may be specified by means of an aspect_specification (see 13.1.1), which is an optional element of most kinds of declarations and applies to the entity or entities being declared. Aspects may also be specified by certain other constructs occurring subsequent to the declaration of the affected entity: a representation aspect value may be specified by means of a representation item and an operational aspect value may be specified by means of an operational item. There are six kinds of representation items: attribute_definition_clauses for representation attributes, enumeration_representation_clauses, record_representation_clauses, at_clauses, component_clauses, and representation pragmas. They can be provided to give more efficient representation or to interface with features that are outside the domain of the language (for example, peripheral hardware). An operational item is an attribute_definition_clause for an operational attribute. An operational item or a representation item applies to an entity identified by a local_name, which denotes an entity declared local to the current declarative region, or a library unit declared immediately preceding a representation pragma in a compilation. Syntax aspect_clause ::= attribute_definition_clause | enumeration_representation_clause | record_representation_clause | at_clause local_name ::= direct_name | direct_name'attribute_designator | library_unit_name A representation pragma is allowed only at places where an aspect_clause or compilation_unit is allowed. Name Resolution Rules In an operational item or representation item, if the local_name is a direct_name, then it shall resolve to denote a declaration (or, in the case of a pragma, one or more declarations) that occurs immediately within the same declarative region as the item. If the local_name has an attribute_designator, then it shall resolve to denote an implementation-defined component (see 13.5.1) or a class-wide type implicitly declared immediately within the same declarative region as the item. A local_name that is a library_unit_name (only permitted in a representation pragma) shall resolve to denote the library_item that immediately precedes (except for other pragmas) the representation pragma. 0.1/3 0.2/3 1/1 1.1/1 1.2/1 2/1 3 4/1 5/1 297 13 December 2012 Representation Issues 13 Ada Reference Manual — 2012 Edition Legality Rules 6/1 7/2 8/3 8.1/3 9/3 9.1/3 The local_name of an aspect_clause or representation pragma shall statically denote an entity (or, in the case of a pragma, one or more entities) declared immediately preceding it in a compilation, or within the same declarative_part, package_specification, task_definition, protected_definition, or record_definition as the representation or operational item. If a local_name denotes a local callable entity, it may do so through a local subprogram_renaming_declaration (as a way to resolve ambiguity in the presence of overloading); otherwise, the local_name shall not denote a renaming_declaration. The representation of an object consists of a certain number of bits (the size of the object). For an object of an elementary type, these are the bits that are normally read or updated by the machine code when loading, storing, or operating-on the value of the object. For an object of a composite type, these are the bits reserved for this object, and include bits occupied by subcomponents of the object. If the size of an object is greater than that of its subtype, the additional bits are padding bits. For an elementary object, these padding bits are normally read and updated along with the others. For a composite object, padding bits might not be read or updated in any given composite operation, depending on the implementation. A representation item directly specifies a representation aspect of the entity denoted by the local_name, except in the case of a type-related representation item, whose local_name shall denote a first subtype, and which directly specifies an aspect of the subtype's type. A representation item that names a subtype is either subtype-specific (Size and Alignment clauses) or type-related (all others). Subtype-specific aspects may differ for different subtypes of the same type. An operational item directly specifies an operational aspect of the entity denoted by the local_name, except in the case of a type-related operational item, whose local_name shall denote a first subtype, and which directly specifies an aspect of the type of the subtype. A representation item that directly specifies an aspect of a subtype or type shall appear after the type is completely defined (see 3.11.1), and before the subtype or type is frozen (see 13.14). If a representation item or aspect_specification is given that directly specifies an aspect of an entity, then it is illegal to give another representation item or aspect_specification that directly specifies the same aspect of the entity. An operational item that directly specifies an aspect of an entity shall appear before the entity is frozen (see 13.14). If an operational item or aspect_specification is given that directly specifies an aspect of an entity, then it is illegal to give another operational item or aspect_specification that directly specifies the same aspect of the entity. 9.2/3 Unless otherwise specified, it is illegal to specify an operational or representation aspect of a generic formal parameter. 10/3 11/3 12/3 For an untagged derived type, it is illegal to specify a type-related representation aspect if the parent type is a by-reference type, or has any user-defined primitive subprograms. Operational and representation aspects of a generic formal parameter are the same as those of the actual. Operational and representation aspects are the same for all views of a type. Specification of a type-related representation aspect is not allowed for a descendant of a generic formal untagged type. The specification of the Size aspect for a given subtype, or the size or storage place for an object (including a component) of a given subtype, shall allow for enough storage space to accommodate any value of the subtype. 13/3 If a specification of a representation or operational aspect is not supported by the implementation, it is illegal or raises an exception at run time. 13.1 Operational and Representation Aspects 13 December 2012 298 Ada Reference Manual — 2012 Edition A type_declaration is illegal if it has one or more progenitors, and a nonconfirming value was specified for a representation aspect of an ancestor, and this conflicts with the representation of some other ancestor. The cases that cause conflicts are implementation defined. 13.1/3 Static Semantics If two subtypes statically match, then their subtype-specific aspects (Size and Alignment) are the same. A derived type inherits each type-related representation aspect of its parent type that was directly specified before the declaration of the derived type, or (in the case where the parent is derived) that was inherited by the parent type from the grandparent type. A derived subtype inherits each subtype-specific representation aspect of its parent subtype that was directly specified before the declaration of the derived type, or (in the case where the parent is derived) that was inherited by the parent subtype from the grandparent subtype, but only if the parent subtype statically matches the first subtype of the parent type. An inherited representation aspect is overridden by a subsequent aspect_specification or representation item that specifies a different value for the same aspect of the type or subtype. 14 15/3 In contrast, whether operational aspects are inherited by a derived type depends on each specific aspect; unless specified, an operational aspect is not inherited. When operational aspects are inherited by a derived type, aspects that were directly specified by aspect_specifications or operational items that are visible at the point of the derived type declaration, or (in the case where the parent is derived) that were inherited by the parent type from the grandparent type are inherited. An inherited operational aspect is overridden by a subsequent aspect_specification or operational item that specifies the same aspect of the type. 15.1/3 When an aspect that is a subprogram is inherited, the derived type inherits the aspect in the same way that a derived type inherits a user-defined primitive subprogram from its parent (see 3.4). 15.2/2 Each aspect of representation of an entity is as follows: • If the aspect is specified for the entity, meaning that it is either directly specified or inherited, then that aspect of the entity is as specified, except in the case of Storage_Size, which specifies a minimum. • If an aspect of representation of an entity is not specified, it is chosen by default in an unspecified manner. If an operational aspect is specified for an entity (meaning that it is either directly specified or inherited), then that aspect of the entity is as specified. Otherwise, the aspect of the entity has the default value for that aspect. An aspect_specification or representation item that specifies a representation aspect that would have been chosen in the absence of the aspect_specification or representation item is said to be confirming. The aspect value specified in this case is said to be a confirming representation aspect value. Other values of the aspect are said to be nonconfirming, as are the aspect_specifications and representation items that specified them. For the elaboration of an aspect_clause, any evaluable constructs within it are evaluated. Dynamic Semantics Implementation Permissions An implementation may interpret representation aspects in an implementation-defined manner. An implementation may place implementation-defined restrictions on the specification of representation aspects. A recommended level of support is defined for the specification of representation aspects and to requirements for related features in each subclause. These recommendations are changed 16 17 18 18.1/1 18.2/3 19/1 20/3 299 13 December 2012 Operational and Representation Aspects 13.1 Ada Reference Manual — 2012 Edition implementations that support the Systems Programming Annex (see C.2, “Required Representation Support”). Implementation Advice 21/3 The recommended level of support for the specification of all representation aspects is qualified as follows: 21.1/3 22/3 • A confirming specification for a representation aspect should be supported. • An implementation need not support the specification for a representation aspect that contains nonstatic expressions, unless each nonstatic expression is a name that statically denotes a constant declared before the entity. 23 24/3 25/3 26/3 • An implementation need not support a specification for the Size for a given composite subtype, nor the size or storage place for an object (including a component) of a given composite subtype, unless the constraints on the subtype and its composite subcomponents (if any) are all static constraints. • An implementation need not support specifying a nonconfirming representation aspect value if it could cause an aliased object or an object of a by-reference type to be allocated at a nonaddressable location or, when the alignment attribute of the subtype of such an object is nonzero, at an address that is not an integral multiple of that alignment. • An implementation need not support specifying a nonconfirming representation aspect value if it could cause an aliased object of an elementary type to have a size other than that which would have been chosen by default. • An implementation need not support specifying a nonconfirming representation aspect value if it could cause an aliased object of a composite type, or an object whose type is by-reference, to have a size smaller than that which would have been chosen by default. 27/3 • An implementation need not support specifying a nonconfirming subtype-specific representation aspect value for an indefinite or abstract subtype. 28/3 For purposes of these rules, the determination of whether specifying a representation aspect value for a type could cause an object to have some property is based solely on the properties of the type itself, not on any available information about how the type is used. In particular, it presumes that minimally aligned objects of this type might be declared at some point. 29/3 NOTES 1 Aspects that can be specified are defined throughout this International Standard, and are summarized in K.1. 13.1.1 Aspect Specifications Certain representation or operational aspects of an entity may be specified as part of its declaration using an aspect_specification, rather than using a separate representation or operational item. The declaration with the aspect_specification is termed the associated declaration. Syntax aspect_specification ::= with aspect_mark [=> aspect_definition] {, aspect_mark [=> aspect_definition] } aspect_mark ::= aspect_identifier['Class] aspect_definition ::= name | expression | identifier 1/3 2/3 3/3 4/3 13.1 Operational and Representation Aspects 13 December 2012 300 Ada Reference Manual — 2012 Edition An aspect_mark identifies an aspect of the entity defined by the associated declaration (the associated entity); the aspect denotes an object, a value, an expression, a subprogram, or some other kind of entity. If the aspect_mark identifies: Name Resolution Rules • an aspect that denotes an object, the aspect_definition shall be a name. The expected type for the name is the type of the identified aspect of the associated entity; • an aspect that is a value or an expression, the aspect_definition shall be an expression. The expected type for the expression is the type of the identified aspect of the associated entity; • an aspect that denotes a subprogram, the aspect_definition shall be a name; the expected profile for the name is the profile required for the aspect of the associated entity; • an aspect that denotes some other kind of entity, the aspect_definition shall be a name, and the name shall resolve to denote an entity of the appropriate kind; • an aspect that is given by an identifier specific to the aspect, the aspect_definition shall be an identifier, and the identifier shall be one of the identifiers specific to the identified aspect. The usage names in an aspect_definition are not resolved at the point of the associated declaration, but rather are resolved at the end of the immediately enclosing declaration list. If the associated declaration is for a subprogram or entry, the names of the formal parameters are directly visible within the aspect_definition, as are certain attributes, as specified elsewhere in this International Standard for the identified aspect. If the associated declaration is a type_declaration, within the aspect_definition the names of any components are directly visible, and the name of the first subtype denotes the current instance of the type (see 8.6). If the associated declaration is a subtype_declaration, within the aspect_definition the name of the new subtype denotes the current instance of the subtype. Legality Rules If the first freezing point of the associated entity comes before the end of the immediately enclosing declaration list, then each usage name in the aspect_definition shall resolve to the same entity at the first freezing point as it does at the end of the immediately enclosing declaration list. At most one occurrence of each aspect_mark is allowed within a single aspect_specification. The aspect identified by the aspect_mark shall be an aspect that can be specified for the associated entity (or view of the entity defined by the associated declaration). The aspect_definition associated with a given aspect_mark may be omitted only when the aspect_mark identifies an aspect of a boolean type, in which case it is equivalent to the aspect_definition being specified as True. If the aspect_mark includes 'Class, then the associated entity shall be a tagged type or a primitive subprogram of a tagged type. There are no language-defined aspects that may be specified on a renaming_declaration, a generic_formal_parameter_declaration, a subunit, a package_body, a task_body, a protected_body, or a body_stub other than a subprogram_body_stub. 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 14/3 15/3 16/3 17/3 A language-defined aspect shall not be specified in an aspect_specification given on a subprogram_body or subprogram_body_stub that is a completion of another declaration. 18/3 Depending on which aspect is identified by the aspect_mark, an aspect_definition specifies: 19/3 Static Semantics 301 13 December 2012 Aspect Specifications 13.1.1 20/3 21/3 22/3 23/3 24/3 25/3 26/3 27/3 28/3 29/3 30/3 31/3 32/3 33/3 34/3 35/3 Ada Reference Manual — 2012 Edition • a name that denotes a subprogram, object, or other kind of entity; • an expression, which is either evaluated to produce a single value, or which (as in a precondition) is to be evaluated at particular points during later execution; or • an identifier specific to the aspect. The identified aspect of the associated entity, or in some cases, the view of the entity defined by the declaration, is as specified by the aspect_definition (or by the default of True when boolean). Whether an aspect_specification applies to an entity or only to the particular view of the entity defined by the declaration is determined by the aspect_mark and the kind of entity. The following aspects are view specific: • An aspect specified on an object_declaration; • An aspect specified on a subprogram_declaration; • An aspect specified on a renaming_declaration. All other aspect_specifications are associated with the entity, and apply to all views of the entity, unless otherwise specified in this International Standard. If the aspect_mark includes 'Class, then: • • if the associated entity is a tagged type, the specification applies to all descendants of the type; if the associated entity is a primitive subprogram of a tagged type T, the specification applies to the corresponding primitive subprogram of all descendants of T. All specifiable operational and representation attributes may be specified with an aspect_specification instead of an attribute_definition_clause (see 13.3). Any aspect specified by a representation pragma or library unit pragma that has a local_name as its single argument may be specified by an aspect_specification, with the entity being the local_name. The aspect_definition is expected to be of type Boolean. The expression shall be static. In addition, other operational and representation aspects not associated with specifiable attributes or representation pragmas may be specified, as specified elsewhere in this International Standard. If an aspect of a derived type is inherited from an ancestor type and has the boolean value True, the inherited value shall not be overridden to have the value False for the derived type, unless otherwise specified in this International Standard. If a Legality Rule or Static Semantics rule only applies when a particular aspect has been specified, the the aspect_specification or aspect attribute_definition_clause is visible (see 8.3) at the point of the application of the rule. specified only when to have been considered is 36/3 Alternative legality and semantics rules may apply for particular aspects, as specified elsewhere in this International Standard. Dynamic Semantics 37/3 At the freezing point of the associated entity, the aspect_specification is elaborated. The elaboration of the aspect_specification includes the evaluation of the name or expression, if any, unless the aspect itself is an expression. If the corresponding aspect represents an expression (as in a precondition), the elaboration has no effect; the expression is evaluated later at points within the execution as specified elsewhere in this International Standard for the particular aspect. 13.1.1 Aspect Specifications 13 December 2012 302 Ada Reference Manual — 2012 Edition Implementations may support implementation-defined aspects. The aspect_specification for an implementation-defined aspect may use an implementation-defined syntax for the aspect_definition, and may follow implementation-defined legality and semantics rules. 38/3 Implementation Permissions 13.2 Packed Types The Pack aspect having the value True specifies that storage minimization should be the main criterion when selecting the representation of a composite type. 1/3 Paragraphs 2 through 4 were moved to Annex J, “Obsolescent Features”. Static Semantics For a full type declaration of a composite type, the following language-defined representation aspect may be specified: Pack The type of aspect Pack is Boolean. When aspect Pack is True for a type, the type (or the extension part) is said to be packed. For a type extension, the parent part is packed as for the parent type, and specifying Pack causes packing only of the extension part. 5/3 5.1/3 If directly specified, the aspect_definition shall be a static expression. If not specified (including by inheritance), the aspect is False. 5.2/3 Implementation Advice If a type is packed, then the implementation should try to minimize storage allocated to objects of the type, possibly at the expense of speed of accessing components, subject to reasonable complexity in addressing calculations. 6 If a packed type has a component that is not of a by-reference type and has no aliased part, then such a component need not be aligned according to the Alignment of its subtype; in particular it need not be allocated on a storage element boundary. 6.1/2 The recommended level of support for the Pack aspect is: • For a packed record type, the components should be packed as tightly as possible subject to the Sizes of the component subtypes, and subject to any record_representation_clause that applies to the type; the implementation may, but need not, reorder components or cross aligned word boundaries to improve the packing. A component whose Size is greater than the word size may be allocated an integral number of words. • For a packed array type, if the Size of the component subtype is less than or equal to the word size, Component_Size should be less than or equal to the Size of the component subtype, rounded up to the nearest factor of the word size. 7/3 8 9/3 303 13 December 2012 Aspect Specifications 13.1.1 Ada Reference Manual — 2012 Edition 13.3 Operational and Representation Attributes 1/1 The values of certain implementation-dependent characteristics can be obtained by interrogating appropriate operational or representation attributes. Some of these attributes are specifiable via an attribute_definition_clause. 2 3 4 5/3 6 7/2 8 attribute_definition_clause ::= for local_name'attribute_designator use expression; | for local_name'attribute_designator use name; Syntax Name Resolution Rules For an attribute_definition_clause that specifies an attribute that denotes a value, the form with an expression shall be used. Otherwise, the form with a name shall be used. For an attribute_definition_clause that specifies an attribute that denotes a value or an object, the expected type for the expression or name is that of the attribute. For an attribute_definition_clause that specifies an attribute that denotes a subprogram, the expected profile for the name is the profile required for the attribute. For an attribute_definition_clause that specifies an attribute that denotes some other kind of entity, the name shall resolve to denote an entity of the appropriate kind. Legality Rules An attribute_designator is allowed in an attribute_definition_clause only if this International Standard explicitly allows it, or for an implementation-defined attribute if the implementation allows it. Each specifiable attribute constitutes an operational aspect or aspect of representation; the name of the aspect is that of the attribute. For an attribute_definition_clause that specifies an attribute that denotes a subprogram, the profile shall be mode conformant with the one required for the attribute, and the convention shall be Ada. Additional requirements are defined for particular attributes. Static Semantics A Size clause is an attribute_definition_clause whose attribute_designator is Size. Similar definitions apply to the other specifiable attributes. A storage element is an addressable element of storage in the machine. A word is the largest amount of storage that can be conveniently and efficiently manipulated by the hardware, given the implementation's run-time model. A word consists of an integral number of storage elements. 8.1/3 A machine scalar is an amount of storage that can be conveniently and efficiently loaded, stored, or operated upon by the hardware. Machine scalars consist of an integral number of storage elements. The set of machine scalars is implementation defined, but includes at least the storage element and the word. Machine scalars are used to interpret component_clauses when the nondefault bit ordering applies. 9/3 The following representation attributes are defined: Address, Alignment, Size, Storage_Size, Component_Size, Has_Same_Storage, and Overlaps_Storage. 10/1 For a prefix X that denotes an object, program unit, or label: 11 X'Address Denotes the address of the first of the storage elements allocated to X. For a program unit or label, this value refers to the machine code associated with the corresponding body or statement. The value of this attribute is of type System.Address. 13.3 Operational and Representation Attributes 13 December 2012 304 Ada Reference Manual — 2012 Edition The prefix of X'Address shall not statically denote a subprogram that has convention Intrinsic. X'Address raises Program_Error if X denotes a subprogram that has convention Intrinsic. 11.1/3 Address may be specified for stand-alone objects and for program units via an attribute_definition_clause. 12 If an Address is specified, it is the programmer's responsibility to ensure that the address is valid and appropriate for the entity and its use; otherwise, program execution is erroneous. 13/3 Erroneous Execution Implementation Advice For an array X, X'Address should point at the first component of the array, and not at the array bounds. The recommended level of support for the Address attribute is: • X'Address should produce a useful result if X is an object that is aliased or of a by-reference type, or is an entity whose Address has been specified. • An implementation should support Address clauses for imported subprograms. • This paragraph was deleted. • If the Address of an object is specified, or it is imported or exported, then the implementation should not perform optimizations based on assumptions of no aliases. NOTES 2 The specification of a link name with the Link_Name aspect (see B.1) for a subprogram or object is an alternative to explicit specification of its link-time address, allowing a link-time directive to place the subprogram or object within memory. 3 The rules for the Size attribute imply, for an aliased object X, that if X'Size = Storage_Unit, then X'Address points at a storage element containing all of the bits of X, and only the bits of X. For a prefix X that denotes an object: Static Semantics X'Alignment The value of this attribute is of type universal_integer, and nonnegative; zero means that the object is not necessarily aligned on a storage element boundary. If X'Alignment is not zero, then X is aligned on a storage unit boundary and X'Address is an integral multiple of X'Alignment (that is, the Address modulo the Alignment is zero). This paragraph was deleted. Alignment may be specified for stand-alone objects via an attribute_definition_clause; the expression of such a clause shall be static, and its value nonnegative. This paragraph was deleted. For every subtype S: S'Alignment The value of this attribute is of type universal_integer, and nonnegative. For an object X of subtype S, if S'Alignment is not zero, then X'Alignment is a nonzero integral multiple of S'Alignment unless specified otherwise by a representation item. Alignment may be specified for first subtypes via an attribute_definition_clause; the expression of such a clause shall be static, and its value nonnegative. 14 15 16 17 18/2 19 20 21 22/2 23/2 24/2 25/2 26/2 26.1/2 26.2/2 26.3/2 26.4/2 Program execution is erroneous if an Address clause is given that conflicts with the Alignment. 27 Erroneous Execution 305 13 December 2012 Operational and Representation Attributes 13.3 Ada Reference Manual — 2012 Edition 28/2 For an object that is not allocated under control of the implementation, execution is erroneous if the object is not aligned according to its Alignment. 28.1/3 For any tagged specific subtype S, S'Class'Alignment should equal S'Alignment. 29 The recommended level of support for the Alignment attribute for subtypes is: Implementation Advice 30/2 31/2 32/2 • An implementation should support an Alignment clause for a discrete type, fixed point type, record type, or array type, specifying an Alignment value that is zero or a power of two, subject to the following: • An implementation need not support an Alignment clause for a signed integer type specifying an Alignment greater than the largest Alignment value that is ever chosen by default by the implementation for any signed integer type. A corresponding limitation may be imposed for modular integer types, fixed point types, enumeration types, record types, and array types. • An implementation need not support a nonconfirming Alignment clause which could enable the creation of an object of an elementary type which cannot be easily loaded and stored by available machine instructions. 32.1/2 • An implementation need not support an Alignment specified for a derived tagged type which is not a multiple of the Alignment of the parent type. An implementation need not support a nonconfirming Alignment specified for a derived untagged by-reference type. 33 The recommended level of support for the Alignment attribute for objects is: 34/2 35 • This paragraph was deleted. • For stand-alone library-level objects of statically constrained subtypes, the implementation should support all Alignments supported by the target linker. For example, page alignment is likely to be supported for such objects, but not for subtypes. 35.1/2 • For other objects, an implementation should at least support the alignments supported for their subtype, subject to the following: 35.2/2 36 37/2 38/3 • An implementation need not support Alignments specified for objects of a by-reference type or for objects of types containing aliased subcomponents if the specified Alignment is not a multiple of the Alignment of the subtype of the object. NOTES 4 Alignment is a subtype-specific attribute. This paragraph was deleted. 5 A component_clause, Component_Size clause, or specifying the Pack aspect as True can override a specified Alignment. 39/1 For a prefix X that denotes an object: Static Semantics 40 X'Size Denotes the size in bits of the representation of the object. The value of this attribute is of the type universal_integer. 41 Size may be specified for stand-alone objects via an attribute_definition_clause; the expression of such a clause shall be static and its value nonnegative. 41.1/2 The size of an array object should not include its bounds. Implementation Advice 13.3 Operational and Representation Attributes 13 December 2012 306 The recommended level of support for the Size attribute of objects is the same as for subtypes (see below), except that only a confirming Size clause need be supported for an aliased elementary object. Ada Reference Manual — 2012 Edition • This paragraph was deleted. For every subtype S: Static Semantics S'Size If S is definite, denotes the size (in bits) that the implementation would choose for the following objects of subtype S: • A record component of subtype S when the record type is packed. • The formal parameter of an instance of Unchecked_Conversion that converts from subtype S to some other subtype. If S is indefinite, the meaning is implementation defined. The value of this attribute is of the type universal_integer. The Size of an object is at least as large as that of its subtype, unless the object's Size is determined by a Size clause, a component_clause, or a Component_Size clause. Size may be specified for first subtypes via an attribute_- definition_clause; the expression of such a clause shall be static and its value nonnegative. In an implementation, Boolean'Size shall be 1. Implementation Requirements Implementation Advice 42/2 43/2 44 45 46 47 48 49 If the Size of a subtype allows for efficient independent addressability (see 9.10) on the target architecture, then the Size of the following objects of the subtype should equal the Size of the subtype: 50/2 • Aliased objects (including components). • Unaliased components, unless the Size of the component is determined by a component_clause or Component_Size clause. A Size clause on a composite subtype should not affect the internal layout of components. The recommended level of support for the Size attribute of subtypes is: • The Size (if not specified) of a static discrete or fixed point subtype should be the number of bits needed to represent each value belonging to the subtype using an unbiased representation, leaving space for a sign bit only if the subtype contains negative values. If such a subtype is a first subtype, then an implementation should support a specified Size for it that reflects this representation. 51 52 53 54 55 • For a subtype implemented with levels of indirection, the Size should include the size of the 56 pointers, but not the size of what they point at. • An implementation should support a Size clause for a discrete type, fixed point type, record type, or array type, subject to the following: • An implementation need not support a Size clause for a signed integer type specifying a Size greater than that of the largest signed integer type supported by the implementation in the absence of a size clause (that is, when the size is chosen by default). A corresponding limitation may be imposed for modular integer types, fixed point types, enumeration types, record types, and array types. 56.1/2 56.2/2 • A nonconfirming size clause for the first subtype of a derived untagged by-reference type 56.3/2 need not be supported. 307 13 December 2012 Operational and Representation Attributes 13.3 57 58/3 59/1 60/3 Ada Reference Manual — 2012 Edition NOTES 6 Size is a subtype-specific attribute. 7 A component_clause or Component_Size clause can override a specified Size. Aspect Pack cannot. For a prefix T that denotes a task object (after any implicit dereference): Static Semantics T'Storage_Size Denotes the number of storage elements reserved for the task. The value of this attribute is of the type universal_integer. The Storage_Size includes the size of the task's stack, if any. The language does not specify whether or not it includes other storage associated with the task (such as the “task control block” used by some implementations.) If the aspect Storage_Size is specified for the type of the object, the value of the Storage_Size attribute is at least the value determined by the aspect. 61/3 Aspect Storage_Size specifies the amount of storage to be reserved for the execution of a task. Paragraphs 62 through 65 were moved to Annex J, “Obsolescent Features”. 65.1/3 For a task type (including the anonymous type of a single_task_declaration), the following language- defined representation aspect may be specified: 65.2/3 Storage_Size The Storage_Size aspect is an expression, which shall be of any integer type. Static Semantics 65.3/3 The Storage_Size aspect shall not be specified for a task interface type. Legality Rules Dynamic Semantics 66/3 When a task object is created, the expression (if any) associated with the Storage_Size aspect of its type is evaluated; the Storage_Size attribute of the newly created task object is at least the value of the expression. 67 At the point of task object creation, or upon task activation, Storage_Error is raised if there is insufficient free storage to accommodate the requested Storage_Size. 68/1 For a prefix X that denotes an array subtype or array object (after any implicit dereference): Static Semantics 69 X'Component_Size Denotes the size in bits of components of the type of X. The value of this attribute is of type universal_integer. Component_Size may be specified for array types via an attribute_definition_clause; the expression of such a clause shall be static, and its value nonnegative. Implementation Advice The recommended level of support for the Component_Size attribute is: • An implementation need not support specified Component_Sizes that are less than the Size of the component subtype. • An implementation should support specified Component_Sizes that are factors and multiples of the word size. For such Component_Sizes, the array should contain no gaps between components. For other Component_Sizes (if supported), the array should contain no gaps 70 71 72 73/3 13.3 Operational and Representation Attributes 13 December 2012 308 between components when Pack is also specified; the implementation should forbid this combination in cases where it cannot support a no-gaps representation. Ada Reference Manual — 2012 Edition For a prefix X that denotes an object: X'Has_Same_Storage Static Semantics X'Has_Same_Storage denotes a function with the following specification: function X'Has_Same_Storage (Arg : any_type) return Boolean The actual parameter shall be a name that denotes an object. The object denoted by the actual parameter can be of any type. This function evaluates the names of the objects involved and returns True if the representation of the object denoted by the actual parameter occupies exactly the same bits as the representation of the object denoted by X; otherwise, it returns False. For a prefix X that denotes an object: X'Overlaps_Storage X'Overlaps_Storage denotes a function with the following specification: function X'Overlaps_Storage (Arg : any_type) return Boolean The actual parameter shall be a name that denotes an object. The object denoted by the actual parameter can be of any type. This function evaluates the names of the objects involved and returns True if the representation of the object denoted by the actual parameter shares at least one bit with the representation of the object denoted by X; otherwise, it returns False. NOTES 8 X'Has_Same_Storage(Y) implies X'Overlaps_Storage(Y). 9 X'Has_Same_Storage(Y) and X'Overlaps_Storage(Y) are not considered to be reads of X and Y. The following type-related operational attribute is defined: External_Tag. For every subtype S of a tagged type T (specific or class-wide): Static Semantics S'External_Tag 73.1/3 73.2/3 73.3/3 73.4/3 73.5/3 73.6/3 73.7/3 73.8/3 73.9/3 73.10/3 73.11/3 74/1 75/3 S'External_Tag denotes an external string representation for S'Tag; it is of the predefined type String. External_Tag may be specified for a specific tagged type via an attribute_definition_clause; the expression of such a clause shall be static. The default external tag representation is implementation defined. See 13.13.2. The value of External_Tag is never inherited; the default value is always used unless a new value is directly specified for a type. If a user-specified external tag S'External_Tag is the same as T'External_Tag for some other tagged type declared by a different declaration in the partition, Program_Error is raised by the elaboration of the attribute_definition_clause. 75.1/3 Dynamic Semantics In an implementation, the default external tag for each specific tagged type declared in a partition shall be distinct, so long as the type is declared outside an instance of a generic body. If the compilation unit in which a given tagged type is declared, and all compilation units on which it semantically depends, are the 76 Implementation Requirements 309 13 December 2012 Operational and Representation Attributes 13.3 Ada Reference Manual — 2012 Edition same in two different partitions, then the external tag for the type shall be the same in the two partitions. What it means for a compilation unit to be the same in two different partitions is implementation defined. At a minimum, if the compilation unit is not recompiled between building the two different partitions that include it, the compilation unit is considered the same in the two partitions. 76.1/3 If a user-specified external tag S'External_Tag is the same as T'External_Tag for some other tagged type declared by a different declaration in the partition, the partition may be rejected. Implementation Permissions 77/2 78 79 80 81 82 83 84/2 85 1 2 3 4 NOTES 10 The following language-defined attributes are specifiable, at least for some of the kinds of entities to which they apply: Address, Alignment, Bit_Order, Component_Size, External_Tag, Input, Machine_Radix, Output, Read, Size, Small, Storage_Pool, Storage_Size, Stream_Size, and Write. 11 It follows from the general rules in 13.1 that if one writes “for X'Size use Y;” then the X'Size attribute_reference will return Y (assuming the implementation allows the Size clause). The same is true for all of the specifiable attributes except Storage_Size. Examples of attribute definition clauses: Examples Byte : constant := 8; Page : constant := 2**12; type Medium is range 0 .. 65_000; for Medium'Size use 2*Byte; for Medium'Alignment use 2; Device_Register : Medium; for Device_Register'Size use Medium'Size; for Device_Register'Address use System.Storage_Elements.To_Address(16#FFFF_0020#); type Short is delta 0.01 range -100.0 .. 100.0; for Short'Size use 15; for Car_Name'Storage_Size use -- specify access type's storage pool size 2000*((Car'Size/System.Storage_Unit) +1); -- approximately 2000 cars function My_Input(Stream : not null access Ada.Streams.Root_Stream_Type'Class) return T; for T'Input use My_Input; -- see 13.13.2 NOTES 12 Notes on the examples: In the Size clause for Short, fifteen bits is the minimum necessary, since the type definition requires Short'Small <= 2**(–7). 13.4 Enumeration Representation Clauses An enumeration_representation_clause specifies the internal codes for enumeration literals. enumeration_representation_clause ::= for first_subtype_local_name use enumeration_aggregate; enumeration_aggregate ::= array_aggregate Syntax Name Resolution Rules The enumeration_aggregate shall be written as a one-dimensional array_aggregate, for which the index subtype is the unconstrained subtype of the enumeration type, and each component expression is expected to be of any integer type. 13.3 Operational and Representation Attributes 13 December 2012 310 Ada Reference Manual — 2012 Edition Legality Rules The first_subtype_local_name of an enumeration_representation_clause shall denote an enumeration subtype. Each component of the array_aggregate shall be given by an expression rather than a <>. The expressions given in the array_aggregate shall be static, and shall specify distinct integer codes for each value of the enumeration type; the associated integer codes shall satisfy the predefined ordering relation of the type. An enumeration_representation_clause specifies the coding aspect of representation. The coding consists of the internal code for each enumeration literal, that is, the integral value used internally to represent each literal. Static Semantics For nonboolean enumeration types, if the coding is not specified for the type, then for each value of the type, the internal code shall be equal to its position number. Implementation Requirements The recommended level of support for enumeration_representation_clauses is: Implementation Advice • An implementation should System.Min_Int..System.Max_Int. An representation_clauses for boolean types. support at least range internal codes implementation need not support enumeration_- the the in NOTES 13 Unchecked_Conversion may be used to query the internal codes used for an enumeration type. The attributes of the type, such as Succ, Pred, and Pos, are unaffected by the enumeration_representation_clause. For example, Pos always in an returns enumeration_representation_clause. that might have been specified the position number, not integer code internal the Example of an enumeration representation clause: Examples type Mix_Code is (ADD, SUB, MUL, LDA, STA, STZ); for Mix_Code use (ADD => 1, SUB => 2, MUL => 3, LDA => 8, STA => 24, STZ =>33); 13.5 Record Layout The (record) layout aspect of representation consists of the storage places for some or all components, that is, storage place attributes of the components. The layout can be specified with a record_representation_- clause. 311 13 December 2012 Enumeration Representation Clauses 13.4 5 6/2 7 8 9 10 11/3 12 13 14 1 Ada Reference Manual — 2012 Edition 13.5.1 Record Representation Clauses A record_representation_clause specifies the storage representation of records and record extensions, that is, the order, position, and size of components (including discriminants, if any). Syntax record_representation_clause ::= for first_subtype_local_name use record [mod_clause] {component_clause} end record; component_clause ::= component_local_name at position range first_bit .. last_bit; position ::= static_expression first_bit ::= static_simple_expression last_bit ::= static_simple_expression Each position, first_bit, and last_bit is expected to be of any integer type. Name Resolution Rules Legality Rules The first_subtype_local_name of a record_representation_clause shall denote a specific record or record extension subtype. If the component_local_name is a direct_name, the local_name shall denote a component of the type. For a record extension, the component shall not be inherited, and shall not be a discriminant that corresponds to a discriminant of the parent type. If the component_local_name has an attribute_designator, the direct_name of the local_name shall denote either the declaration of the type or a component of the type, and the attribute_designator shall denote an implementation-defined implicit component of the type. 1 2 3 4 5 6 7 8/2 9 10 The position, first_bit, and last_bit shall be static expressions. The value of position and first_bit shall be nonnegative. The value of last_bit shall be no less than first_bit – 1. 10.1/2 If the nondefault bit ordering applies to the type, then either: 10.2/2 10.3/2 11 • • the value of last_bit shall be less than the size of the largest machine scalar; or the value of first_bit shall be zero and the value of last_bit + 1 shall be a multiple of System.Storage_Unit. At most one component_clause is allowed for each component of the type, including for each discriminant (component_clauses may be given for some, all, or none of the components). Storage places within a component_list shall not overlap, unless they are for components in distinct variants of the same variant_part. 12 A name that denotes a component of a type is not allowed within a record_representation_clause for the type, except as the component_local_name of a component_clause. 13/2 A record_representation_clause (without the mod_clause) specifies the layout. Static Semantics 13.5.1 Record Representation Clauses 13 December 2012 312 Ada Reference Manual — 2012 Edition If the default bit ordering applies to the type, the position, component_clause directly specify the position and size of the corresponding component. first_bit, and last_bit of each If the nondefault bit ordering applies to the type, then the layout is determined as follows: • the component_clauses for which the value of last_bit is greater than or equal to the size of the largest machine scalar directly specify the position and size of the corresponding component; • for other component_clauses, all of the components having the same value of position are considered to be part of a single machine scalar, located at that position; this machine scalar has a size which is the smallest machine scalar size larger than the largest last_bit for all component_clauses at that position; the first_bit and last_bit of each component_clause are then interpreted as bit offsets in this machine scalar. A record_representation_clause for a record extension does not override the layout of the parent part; if the layout was specified for the parent type, it is inherited by the record extension. Implementation Permissions An implementation may generate implementation-defined components (for example, one containing the offset of another component). An implementation may generate names that denote such implementation- defined components; such names shall be implementation-defined attribute_references. An implemen- tation may allow such implementation-defined names to be used in record_representation_clauses. An implementation can restrict such component_clauses in any manner it sees fit. If a record_representation_clause is given for an untagged derived type, the storage place attributes for all of the components of the derived type may differ from those of the corresponding components of the parent type, even for components whose storage place is not specified explicitly in the record_- representation_clause. Implementation Advice The recommended level of support for record_representation_clauses is: • An implementation should support machine scalars that correspond to all of the integer, floating point, and address formats supported by the machine. • An implementation should support storage places that can be extracted with a load, mask, shift sequence of machine code, and set with a load, shift, mask, store sequence, given the available machine instructions and run-time model. • A storage place should be supported if its size is equal to the Size of the component subtype, and it starts and ends on a boundary that obeys the Alignment of the component subtype. 13.1/2 13.2/3 13.3/2 13.4/2 14 15 16 17 17.1/2 18 19 • For a component with a subtype whose Size is less than the word size, any storage place that 20/2 does not cross an aligned word boundary should be supported. • An implementation may reserve a storage place for the tag field of a tagged type, and disallow other components from overlapping that place. • An implementation need not support a component_clause for a component of an extension part if the storage place is not after the storage places of all components of the parent type, whether or not those storage places had been specified. NOTES 14 If no component_clause is given for a component, then the choice of the storage place for the component is left to the implementation. If component_clauses are given for all components, the record_representation_clause completely specifies the representation of the type and will be obeyed exactly by the implementation. 21 22 23 313 13 December 2012 Record Representation Clauses 13.5.1 Ada Reference Manual — 2012 Edition Example of specifying the layout of a record type: Examples Word : constant := 4; -- storage element is byte, 4 bytes per word type State is (A,M,W,P); type Mode is (Fix, Dec, Exp, Signif); type Byte_Mask is array (0..7) of Boolean; type State_Mask is array (State) of Boolean; type Mode_Mask is array (Mode) of Boolean; type Program_Status_Word is record System_Mask : Byte_Mask; Protection_Key : Integer range 0 .. 3; Machine_State : State_Mask; Interrupt_Cause : Interruption_Code; Ilc : Integer range 0 .. 3; Cc : Integer range 0 .. 3; Program_Mask : Mode_Mask; Inst_Address : Address; end record; for Program_Status_Word use record System_Mask at 0*Word range 0 .. 7; Protection_Key at 0*Word range 10 .. 11; -- bits 8,9 unused Machine_State at 0*Word range 12 .. 15; Interrupt_Cause at 0*Word range 16 .. 31; Ilc at 1*Word range 0 .. 1; -- second word Cc at 1*Word range 2 .. 3; Program_Mask at 1*Word range 4 .. 7; Inst_Address at 1*Word range 8 .. 31; end record; for Program_Status_Word'Size use 8*System.Storage_Unit; for Program_Status_Word'Alignment use 8; NOTES 15 Note on the example: The record_representation_clause defines the record layout. The Size clause guarantees that (at least) eight storage elements are used for objects of the type. The Alignment clause guarantees that aliased, imported, or exported objects of the type will have addresses divisible by eight. 13.5.2 Storage Place Attributes Static Semantics For a component C of a composite, non-array object R, the storage place attributes are defined: R.C'Position If the nondefault bit ordering applies to the composite type, and if a component_clause specifies the placement of C, denotes the value given for the position of the component_clause; otherwise, denotes the same value as R.C'Address – R'Address. The value of this attribute is of the type universal_integer. 24 25 26 27 28 29 30 31 1 2/2 3/2 R.C'First_Bit If the nondefault bit ordering applies to the composite type, and if a component_clause specifies the placement of C, denotes the value given for the first_bit of the component_clause; otherwise, denotes the offset, from the start of the first of the storage elements occupied by C, of the first bit occupied by C. This offset is measured in bits. The first bit of a storage element is numbered zero. The value of this attribute is of the type universal_integer. 13.5.1 Record Representation Clauses 13 December 2012 314 Ada Reference Manual — 2012 Edition R.C'Last_Bit If the nondefault bit ordering applies to the composite type, and if a component_clause specifies the placement of C, denotes the value given for the last_bit of the component_clause; otherwise, denotes the offset, from the start of the first of the storage elements occupied by C, of the last bit occupied by C. This offset is measured in bits. The value of this attribute is of the type universal_integer. Implementation Advice If a component is represented using some form of pointer (such as an offset) to the actual data of the component, and this data is contiguous with the rest of the object, then the storage place attributes should reflect the place of the actual data, not the pointer. If a component is allocated discontiguously from the rest of the object, then a warning should be generated upon reference to one of its storage place attributes. 13.5.3 Bit Ordering The Bit_Order attribute specifies the interpretation of the storage place attributes. Static Semantics A bit ordering is a method of interpreting the meaning of the storage place attributes. High_Order_First (known in the vernacular as “big endian”) means that the first bit of a storage element (bit 0) is the most significant bit (interpreting the sequence of bits that represent a component as an unsigned integer value). Low_Order_First (known in the vernacular as “little endian”) means the opposite: the first bit is the least significant. For every specific record subtype S, the following attribute is defined: S'Bit_Order Denotes the bit ordering for the type of S. The value of this attribute is of type System.Bit_Order. Bit_Order may be specified for specific record types via an attribute_definition_clause; the expression of such a clause shall be static. If Word_Size = Storage_Unit, the default bit ordering is implementation defined. If Word_Size > Storage_Unit, the default bit ordering is the same as the ordering of storage elements in a word, when interpreted as an integer. The storage place attributes of a component of a type are interpreted according to the bit ordering of the type. Implementation Advice The recommended level of support for the nondefault bit ordering is: • The implementation should support the nondefault bit ordering in addition to the default bit ordering. NOTES 16 Bit_Order clauses make it possible to write record_representation_clauses that can be ported between machines having different bit ordering. They do not guarantee transparent exchange of data between such machines. 4/2 5 1 2 3 4 5 6 7 8/2 9/2 315 13 December 2012 Storage Place Attributes 13.5.2 Ada Reference Manual — 2012 Edition 13.6 Change of Representation A type_conversion (see 4.6) can be used to convert between two different representations of the same array or record. To convert an array from one representation to another, two array types need to be declared with matching component subtypes, and convertible index types. If one type has Pack specified and the other does not, then explicit conversion can be used to pack or unpack an array. To convert a record from one representation to another, two record types with a common ancestor type need to be declared, with no inherited subprograms. Distinct representations can then be specified for the record types, and explicit conversion between the types can be used to effect a change in representation. Example of change of representation: Examples -- Packed_Descriptor and Descriptor are two different types -- with identical characteristics, apart from their -- representation type Descriptor is record -- components of a descriptor end record; type Packed_Descriptor is new Descriptor; for Packed_Descriptor use record -- component clauses for some or for all components end record; -- Change of representation can now be accomplished by explicit type conversions: D : Descriptor; P : Packed_Descriptor; P := Packed_Descriptor(D); -- pack D D := Descriptor(P); -- unpack P 1/3 2 3 4 5 6 7 8 9 10 13.6 Change of Representation 13 December 2012 316 Ada Reference Manual — 2012 Edition 13.7 The Package System For each implementation there is a library package called System which includes the definitions of certain configuration-dependent characteristics. 1 The following language-defined library package exists: Static Semantics package System is pragma Pure(System); type Name is implementation-defined-enumeration-type; System_Name : constant Name := implementation-defined; -- System-Dependent Named Numbers: Min_Int : constant := root_integer'First; Max_Int : constant := root_integer'Last; Max_Binary_Modulus : constant := implementation-defined; Max_Nonbinary_Modulus : constant := implementation-defined; Max_Base_Digits : constant := root_real'Digits; Max_Digits : constant := implementation-defined; Max_Mantissa : constant := implementation-defined; Fine_Delta : constant := implementation-defined; Tick : constant := implementation-defined; -- Storage-related Declarations: type Address is implementation-defined; Null_Address : constant Address; Storage_Unit : constant := implementation-defined; Word_Size : constant := implementation-defined * Storage_Unit; Memory_Size : constant := implementation-defined; -- Address Comparison: function "<" (Left, Right : Address) return Boolean with Convention => Intrinsic; function "<="(Left, Right : Address) return Boolean with Convention => Intrinsic; function ">" (Left, Right : Address) return Boolean with Convention => Intrinsic; function ">="(Left, Right : Address) return Boolean with Convention => Intrinsic; function "=" (Left, Right : Address) return Boolean with Convention => Intrinsic; -- function "/=" (Left, Right : Address) return Boolean; -- "/=" is implicitly defined -- Other System-Dependent Declarations: type Bit_Order is (High_Order_First, Low_Order_First); Default_Bit_Order : constant Bit_Order := implementation-defined; -- Priority-related declarations (see D.1): subtype Any_Priority is Integer range implementation-defined; subtype Priority is Any_Priority range Any_Priority'First .. implementation-defined; subtype Interrupt_Priority is Any_Priority range Priority'Last+1 .. Any_Priority'Last; Default_Priority : constant Priority := (Priority'First + Priority'Last)/2; private ... -- not specified by the language end System; 2 3/2 4 5 6 7 8 9 10 11 12 13 14/3 15/2 16 17 18 317 13 December 2012 The Package System 13.7 Ada Reference Manual — 2012 Edition 19 20 21 22 Name is an enumeration subtype. Values of type Name are the names of alternative machine configura- tions handled by the implementation. System_Name represents the current machine configuration. The named numbers Fine_Delta and Tick are of the type universal_real; the others are of the type universal_integer. The meanings of the named numbers are: Min_Int The smallest (most negative) value allowed for the expressions of a signed_integer_type_- definition. 23 Max_Int The largest (most positive) value allowed for the expressions of a signed_integer_type_- definition. 24 Max_Binary_Modulus A power of two such that it, and all lesser positive powers of two, are allowed as the modulus of a modular_type_definition. 25 Max_Nonbinary_Modulus A value such that it, and all lesser positive integers, are allowed as the modulus of a modular_type_definition. 26 Max_Base_Digits The largest value allowed for the requested decimal precision in a floating_point_definition. 27 Max_Digits The largest value allowed for the requested decimal precision in a floating_point_definition to real_range_specification. Max_Digits than or equal less is that has no Max_Base_Digits. 28 Max_Mantissa The largest possible number of binary digits in the mantissa of machine numbers of a user- defined ordinary fixed point type. (The mantissa is defined in Annex G.) 29 Fine_Delta The smallest delta allowed in an ordinary_fixed_point_definition that has the real_range_- specification range –1.0 .. 1.0. 30 Tick A period in seconds approximating the real time interval during which the value of Calendar.Clock remains constant. 31 Storage_Unit 32 33 34/2 The number of bits per storage element. Word_Size The number of bits per word. Memory_Size An implementation-defined value that is intended to reflect the memory size of the configuration in storage elements. Address is a definite, nonlimited type with preelaborable initialization (see 10.2.1). Address represents machine addresses capable of addressing individual storage elements. Null_Address is an address that is distinct from the address of any object or program unit. 35/2 Default_Bit_Order shall be a static constant. See 13.5.3 for an explanation of Bit_Order and Default_Bit_Order. 36/2 An implementation may add additional implementation-defined declarations to package System and its children. However, it is usually better for the implementation to provide additional functionality via implementation-defined children of System. Implementation Permissions 13.7 The Package System 13 December 2012 318 Ada Reference Manual — 2012 Edition Address should be a private type. Implementation Advice NOTES 17 There are also some language-defined child packages of System defined elsewhere. 13.7.1 The Package System.Storage_Elements Static Semantics The following language-defined library package exists: package System.Storage_Elements is pragma Pure(Storage_Elements); type Storage_Offset is range implementation-defined; subtype Storage_Count is Storage_Offset range 0..Storage_Offset'Last; type Storage_Element is mod implementation-defined; for Storage_Element'Size use Storage_Unit; type Storage_Array is array (Storage_Offset range <>) of aliased Storage_Element; for Storage_Array'Component_Size use Storage_Unit; -- Address Arithmetic: function "+"(Left : Address; Right : Storage_Offset) return Address with Convention => Intrinsic; function "+"(Left : Storage_Offset; Right : Address) return Address with Convention => Intrinsic; function "-"(Left : Address; Right : Storage_Offset) return Address with Convention => Intrinsic; function "-"(Left, Right : Address) return Storage_Offset with Convention => Intrinsic; function "mod"(Left : Address; Right : Storage_Offset) return Storage_Offset with Convention => Intrinsic; -- Conversion to/from integers: type Integer_Address is implementation-defined; function To_Address(Value : Integer_Address) return Address with Convention => Intrinsic; function To_Integer(Value : Address) return Integer_Address with Convention => Intrinsic; end System.Storage_Elements; Storage_Element represents a storage element. Storage_Offset represents an offset in storage elements. Storage_Count represents a number of storage elements. Storage_Array represents a contiguous sequence of storage elements. Integer_Address is a (signed or modular) integer subtype. To_Address and To_Integer convert back and forth between this type and Address. Storage_Offset'Last shall be greater than or equal to Integer'Last or the largest possible storage offset, whichever is smaller. Storage_Offset'First shall be <= (–Storage_Offset'Last). Implementation Requirements Paragraph 15 was deleted. 37 38 1 2/2 3 4 5 6 7/3 8/3 9 10/3 11/3 12 13 14 319 13 December 2012 The Package System 13.7 Ada Reference Manual — 2012 Edition 16 Operations in System and its children should reflect the target environment semantics as closely as is reasonable. For example, on most machines, it makes sense for address arithmetic to “wrap around.” Operations that do not make sense should raise Program_Error. Implementation Advice 1 2 3/3 4/3 5/2 13.7.2 The Package System.Address_To_Access_Conversions The following language-defined generic library package exists: Static Semantics generic type Object(<>) is limited private; package System.Address_To_Access_Conversions is pragma Preelaborate(Address_To_Access_Conversions); type Object_Pointer is access all Object; function To_Pointer(Value : Address) return Object_Pointer with Convention => Intrinsic; function To_Address(Value : Object_Pointer) return Address with Convention => Intrinsic; end System.Address_To_Access_Conversions; The To_Pointer and To_Address subprograms convert back and forth between values of types Object_Pointer and Address. To_Pointer(X'Address) is equal to X'Unchecked_Access for any X that allows Unchecked_Access. To_Pointer(Null_Address) returns null. For other addresses, the behavior is unspecified. To_Address(null) returns Null_Address. To_Address(Y), where Y /= null, returns Y.all'Address. 6 An implementation may place restrictions on instantiations of Address_To_Access_Conversions. Implementation Permissions 13.8 Machine Code Insertions A machine code insertion can be achieved by a call to a subprogram whose sequence_of_statements contains code_statements. code_statement ::= qualified_expression; Syntax A code_statement is only allowed in the handled_sequence_of_statements of a subprogram_- body. If a subprogram_body contains any code_statements, then within this subprogram_body the only allowed form of statement is a code_statement (labeled or not), the only allowed declarative_- items are use_clauses, and no exception_handler is allowed (comments and pragmas are allowed as usual). The qualified_expression is expected to be of any type. Name Resolution Rules The qualified_expression shall be of a type declared in package System.Machine_Code. Legality Rules A code_statement shall appear only within the scope of a with_clause that mentions package System.Machine_Code. 1 2 3 4 5 6 13.7.1 The Package System.Storage_Elements 13 December 2012 320 Ada Reference Manual — 2012 Edition The contents of the library package System.Machine_Code (if provided) are implementation defined. The meaning of code_statements is implementation defined. Typically, each qualified_expression represents a machine instruction or assembly directive. Static Semantics An implementation may place restrictions on code_statements. An implementation is not required to provide package System.Machine_Code. Implementation Permissions NOTES 18 An implementation may provide implementation-defined pragmas specifying register conventions and calling conventions. 19 Machine code functions are exempt from the rule that a return statement is required. In fact, return statements are forbidden, since only code_statements are allowed. 20 Intrinsic subprograms (see 6.3.1, “Conformance Rules”) can also be used to achieve machine code insertions. Interface to assembly language can be achieved using the features in Annex B, “Interface to Other Languages”. Example of a code statement: Examples M : Mask; procedure Set_Mask with Inline; procedure Set_Mask is use System.Machine_Code; -- assume “with System.Machine_Code;” appears somewhere above begin SI_Format'(Code => SSM, B => M'Base_Reg, D => M'Disp); -- Base_Reg and Disp are implementation-defined attributes end Set_Mask; 7 8 9 10/2 11 12 13/3 14 13.9 Unchecked Type Conversions An unchecked type conversion can be achieved by a call to an instance of the generic function Unchecked_Conversion. 1 The following language-defined generic library function exists: Static Semantics generic type Source(<>) is limited private; type Target(<>) is limited private; function Ada.Unchecked_Conversion(S : Source) return Target with Convention => Intrinsic; pragma Pure(Ada.Unchecked_Conversion); Dynamic Semantics The size of the formal parameter S in an instance of Unchecked_Conversion is that of its subtype. This is the actual subtype passed to Source, except when the actual is an unconstrained composite subtype, in which case the subtype is constrained by the bounds or discriminants of the value of the actual expression passed to S. If all of the following are true, the effect of an unchecked conversion is to return the value of an object of the target subtype whose representation is the same as that of the source object S: • S'Size = Target'Size. 2 3/3 4 5 6 321 13 December 2012 Machine Code Insertions 13.8 7/3 8 9 10 11/2 Ada Reference Manual — 2012 Edition • S'Alignment is a multiple of Target'Alignment or Target'Alignment is zero. • The target subtype is not an unconstrained composite subtype. • S and the target subtype both have a contiguous representation. • The representation of S is a representation of an object of the target subtype. Otherwise, if the result type is scalar, the result of the function is implementation defined, and can have an invalid representation (see 13.9.1). If the result type is nonscalar, the effect is implementation defined; in particular, the result can be abnormal (see 13.9.1). 12 An implementation may return the result of an unchecked conversion by reference, if the Source type is not a by-copy type. In this case, the result of the unchecked conversion represents simply a different (read- only) view of the operand of the conversion. Implementation Permissions 13 An implementation may place restrictions on Unchecked_Conversion. Implementation Advice 14/2 15 Since the Size of an array object generally does not include its bounds, the bounds should not be part of the converted data. The implementation should not generate unnecessary run-time checks to ensure that the representation of S is a representation of the target type. It should take advantage of the permission to return by reference when possible. Restrictions on unchecked conversions should be avoided unless required by the target environment. 16 The recommended level of support for unchecked conversions is: 17/3 • Unchecked conversions should be supported and should be reversible in the cases where this subclause defines the result. To enable meaningful use of unchecked conversion, a contiguous representation should be used for elementary subtypes, for statically constrained array subtypes whose component subtype is one of the subtypes described in this paragraph, and for record subtypes without discriminants whose component subtypes are described in this paragraph. 13.9.1 Data Validity 1 2 3 4 5 Certain actions that can potentially lead to erroneous execution are not directly erroneous, but instead can cause objects to become abnormal. Subsequent uses of abnormal objects can be erroneous. A scalar object can have an invalid representation, which means that the object's representation does not represent any value of the object's subtype. The primary cause of invalid representations is uninitialized variables. Abnormal objects and invalid representations are explained in this subclause. Dynamic Semantics When an object is first created, and any explicit or default initializations have been performed, the object and all of its parts are in the normal state. Subsequent operations generally leave them normal. However, an object or part of an object can become abnormal in the following ways: • An assignment to the object is disrupted due to an abort (see 9.8) or due to the failure of a language-defined check (see 11.6). 13.9 Unchecked Type Conversions 13 December 2012 322 Ada Reference Manual — 2012 Edition • The object is not scalar, and is passed to an in out or out parameter of an imported procedure, the Read procedure of an instance of Sequential_IO, Direct_IO, or Storage_IO, or the stream attribute T'Read, if after return from the procedure the representation of the parameter does not represent a value of the parameter's subtype. • The object is the return object of a function call of a nonscalar type, and the function is an imported function, an instance of Unchecked_Conversion, or the stream attribute T'Input, if after return from the function the representation of the return object does not represent a value of the function's subtype. 6/2 6.1/2 For an imported object, it is the programmer's responsibility to ensure that the object remains in a normal state. 6.2/2 Whether or not an object actually becomes abnormal in these cases is not specified. An abnormal object becomes normal again upon successful completion of an assignment to the object as a whole. It is erroneous to evaluate a primary that is a name denoting an abnormal object, or to evaluate a prefix that denotes an abnormal object. Erroneous Execution Bounded (Run-Time) Errors If the representation of a scalar object does not represent a value of the object's subtype (perhaps because the object was not initialized), the object is said to have an invalid representation. It is a bounded error to evaluate the value of such an object. If the error is detected, either Constraint_Error or Program_Error is raised. Otherwise, execution continues using the invalid representation. The rules of the language outside this subclause assume that all objects have valid representations. The semantics of operations on invalid representations are as follows: • If the representation of the object represents a value of the object's type, the value of the type is used. • If the representation of the object does not represent a value of the object's type, the semantics of operations on such representations is implementation-defined, but does not by itself lead to erroneous or unpredictable execution, or to other objects becoming abnormal. Erroneous Execution A call to an imported function or an instance of Unchecked_Conversion is erroneous if the result is scalar, the result object has an invalid representation, and the result is used other than as the expression of an an assignment_statement object_renaming_declaration, or as the prefix of a Valid attribute. If such a result object is used as the source of an assignment, and the assigned value is an invalid representation for the target of the assignment, then any use of the target object prior to a further assignment to the target object, other than as the prefix of a Valid attribute reference, is erroneous. object_declaration, object_name the an of or as The dereference of an access value is erroneous if it does not designate an object of an appropriate type or a subprogram with an appropriate profile, if it designates a nonexistent object, or if it is an access-to- variable value that designates a constant object and it did not originate from an attribute_reference applied to an aliased variable view of a controlled or immutably limited object. An access value whose dereference is erroneous can exist, for example, because of Unchecked_Deallocation, Unchecked_Access, or Unchecked_Conversion. 7 8 9 10 11 12/3 13/3 NOTES 21 Objects can become abnormal due to other kinds of actions that directly update the object's representation; such actions are generally considered directly erroneous, however. 14 323 13 December 2012 Data Validity 13.9.1 Ada Reference Manual — 2012 Edition 13.9.2 The Valid Attribute 1 2 The Valid attribute can be used to check the validity of data produced by unchecked conversion, input, interface to foreign languages, and the like. For a prefix X that denotes a scalar object (after any implicit dereference), the following attribute is defined: Static Semantics 3/3 X'Valid Yields True if and only if the object denoted by X is normal, has a valid representation, and the predicate of the nominal subtype of X evaluates to True. The value of this attribute is of the predefined type Boolean. 4 5 6 7 8 9 10 11 12 13/2 1 2 3 4 5 NOTES 22 Invalid data can be created in the following cases (not counting erroneous or unpredictable execution): input, an uninitialized scalar object, the result of an unchecked conversion, • • • • • • disrupting an assignment due to the failure of a language-defined check (see 11.6), and • use of an object whose Address has been specified. interface to another language (including machine code), aborting an assignment, 23 X'Valid is not considered to be a read of X; hence, it is not an error to check the validity of invalid data. 24 The Valid attribute may be used to check the result of calling an instance of Unchecked_Conversion (or any other operation that can return invalid values). However, an exception handler should also be provided because implementations are permitted to raise Constraint_Error or Program_Error if they detect the use of an invalid representation (see 13.9.1). 13.10 Unchecked Access Value Creation The attribute Unchecked_Access is used to create access values in an unsafe manner — the programmer is responsible for preventing “dangling references.” The following attribute is defined for a prefix X that denotes an aliased view of an object: Static Semantics X'Unchecked_Access rules and semantics to All X'Unchecked_Access, except that, for the purposes of accessibility rules and checks, it is as if X were declared immediately within a library package. (see 3.10.2) apply also to X'Access that apply NOTES 25 This attribute is provided to support the situation where a local object is to be inserted into a global linked data structure, when the programmer knows that it will always be removed from the data structure prior to exiting the object's scope. The Access attribute would be illegal in this case (see 3.10.2, “Operations of Access Types”). 26 There is no Unchecked_Access attribute for subprograms. 13.9.2 The Valid Attribute 13 December 2012 324 Ada Reference Manual — 2012 Edition 13.11 Storage Management Each access-to-object type has an associated storage pool. The storage allocated by an allocator comes from the pool; instances of Unchecked_Deallocation return storage to the pool. Several access types can share the same pool. A storage pool is a variable of a type in the class rooted at Root_Storage_Pool, which is an abstract limited controlled type. By default, the implementation chooses a standard storage pool for each access-to-object type. The user may define new pool types, and may override the choice of pool for an access-to-object type by specifying Storage_Pool for the type. If Storage_Pool is specified for a given access type, Storage_Size shall not be specified for it. Legality Rules The following language-defined library package exists: Static Semantics with Ada.Finalization; with System.Storage_Elements; package System.Storage_Pools is pragma Preelaborate(System.Storage_Pools); type Root_Storage_Pool is abstract new Ada.Finalization.Limited_Controlled with private; pragma Preelaborable_Initialization(Root_Storage_Pool); procedure Allocate( Pool : in out Root_Storage_Pool; Storage_Address : out Address; Size_In_Storage_Elements : in Storage_Elements.Storage_Count; Alignment : in Storage_Elements.Storage_Count) is abstract; procedure Deallocate( Pool : in out Root_Storage_Pool; Storage_Address : in Address; Size_In_Storage_Elements : in Storage_Elements.Storage_Count; Alignment : in Storage_Elements.Storage_Count) is abstract; function Storage_Size(Pool : Root_Storage_Pool) return Storage_Elements.Storage_Count is abstract; private ... -- not specified by the language end System.Storage_Pools; A storage pool type (or pool type) is a descendant of Root_Storage_Pool. The elements of a storage pool are the objects allocated in the pool by allocators. For every access-to-object subtype S, the following representation attributes are defined: S'Storage_Pool Denotes the storage pool of the type of S. The type of this attribute is Root_Storage_- Pool'Class. S'Storage_Size Yields the result of calling Storage_Size(S'Storage_Pool), which is intended to be a measure of the number of storage elements reserved for the pool. The type of this attribute is universal_integer. Storage_Size or Storage_Pool may be specified for a nonderived access-to-object type via an attribute_- definition_clause; the name in a Storage_Pool clause shall denote a variable. 1 2/2 3 4 5 6/2 7 8 9 10 11 12/2 13 14 15 325 13 December 2012 Storage Management 13.11 Ada Reference Manual — 2012 Edition 16/3 An allocator of a type T that does not support subpools allocates storage from T's storage pool. If the storage pool is a user-defined object, then the storage is allocated by calling Allocate as described below. Allocators for types that support subpools are described in 13.11.4. 17 18 19 20 21 If Storage_Pool is not specified for a type defined by an access_to_object_definition, then the implementation chooses a standard storage pool for it in an implementation-defined manner. In this case, the exception Storage_Error is raised by an allocator if there is not enough storage. It is implementation defined whether or not the implementation provides user-accessible names for the standard pool type(s). If Storage_Size is specified for an access type, then the Storage_Size of this pool is at least that requested, and the storage for the pool is reclaimed when the master containing the declaration of the access type is left. If the implementation cannot satisfy the request, Storage_Error is raised at the point of the attribute_- definition_clause. If neither Storage_Pool nor Storage_Size are specified, then the meaning of Storage_Size is implementation defined. If Storage_Pool is specified for an access type, then the specified pool is used. The effect of calling Allocate and Deallocate for a standard storage pool directly (rather than implicitly via an allocator or an instance of Unchecked_Deallocation) is unspecified. Erroneous Execution If Storage_Pool is specified for an access type, then if Allocate can satisfy the request, it should allocate a contiguous block of memory, and return the address of the first storage element in Storage_Address. The block should contain Size_In_Storage_Elements storage elements, and should be aligned according to Alignment. The allocated storage should not be used for any other purpose while the pool element remains in existence. If the request cannot be satisfied, then Allocate should propagate an exception (such as Storage_Error). If Allocate behaves in any other manner, then the program execution is erroneous. Implementation Requirements 21.1/3 21.2/3 21.3/3 The Allocate procedure of a user-defined storage pool object P may be called by the implementation only to allocate storage for a type T whose pool is P, only at the following points: • During the execution of an allocator of type T; • During the execution of a return statement for a function whose result is built-in-place in the result of an allocator of type T; 21.4/3 • During the execution of an assignment operation with a target of an allocated object of type T with a part that has an unconstrained discriminated subtype with defaults. 21.5/3 For each of the calls of Allocate described above, P (equivalent to T'Storage_Pool) is passed as the Pool parameter. The Size_In_Storage_Elements parameter indicates the number of storage elements to be allocated, and is no more than D'Max_Size_In_Storage_Elements, where D is the designated subtype of T. The Alignment parameter is a nonzero integral multiple of D'Alignment if D is a specific type, and otherwise is a nonzero integral multiple of the alignment of the specific type identified by the tag of the object being created; it is unspecified if there is no such value. The Alignment parameter is no more than D'Max_Alignment_For_Allocation. The result returned in the Storage_Address parameter is used as the address of the allocated storage, which is a contiguous block of memory of Size_In_Storage_Elements storage elements. Any exception propagated by Allocate is propagated by the construct that contained the call. 21.6/3 The number of calls to Allocate needed to implement an allocator for any particular type is unspecified. The number of calls to Deallocate needed to implement an instance of Unchecked_Deallocation (see 13.11.2) for any particular object is the same as the number of Allocate calls for that object. 13.11 Storage Management 13 December 2012 326 Ada Reference Manual — 2012 Edition The Deallocate procedure of a user-defined storage pool object P may be called by the implementation to deallocate storage for a type T whose pool is P only at the places when an Allocate call is allowed for P, during the execution of an instance of Unchecked_Deallocation for T, or as part of the finalization of the collection of T. For such a call of Deallocate, P (equivalent to T'Storage_Pool) is passed as the Pool parameter. The value of the Storage_Address parameter for a call to Deallocate is the value returned in the Storage_Address parameter of the corresponding successful call to Allocate. The values of the Size_In_Storage_Elements and Alignment parameters are the same values passed to the corresponding Allocate call. Any exception propagated by Deallocate is propagated by the construct that contained the call. An implementation shall document the set of values that a user-defined Allocate procedure needs to accept for the Alignment parameter. An implementation shall document how the standard storage pool is chosen, and how storage is allocated by standard storage pools. Documentation Requirements Implementation Advice An implementation should document any cases in which it dynamically allocates heap storage for a purpose other than the evaluation of an allocator. A default (implementation-provided) storage pool for an access-to-constant type should not have overhead to support deallocation of individual objects. The storage pool used for an allocator of an anonymous access type should be determined as follows: • If the allocator is defining a coextension (see 3.10.2) of an object being created by an outer allocator, then the storage pool used for the outer allocator should also be used for the coextension; • For other access discriminants and access parameters, the storage pool should be created at the point of the allocator, and be reclaimed when the allocated object becomes inaccessible; • If the allocator defines the result of a function with an access result, the storage pool is determined as though the allocator were in place of the call of the function. If the call is the operand of a type conversion, the storage pool is that of the target access type of the conversion. If the call is itself defining the result of a function with an access result, this rule is applied recursively; 21.7/3 22 23 24 25/2 25.1/2 25.2/2 25.3/3 • Otherwise, a default storage pool should be created at the point where the anonymous access 25.4/2 type is elaborated; such a storage pool need not support deallocation of individual objects. NOTES 27 A user-defined storage pool type can be obtained by extending the Root_Storage_Pool type, and overriding the primitive subprograms Allocate, Deallocate, and Storage_Size. A user-defined storage pool can then be obtained by declaring an object of the type extension. The user can override Initialize and Finalize if there is any need for nontrivial initialization and finalization for a user-defined pool type. For example, Finalize might reclaim blocks of storage that are allocated separately from the pool object itself. 28 The writer of the user-defined allocation and deallocation procedures, and users of allocators for the associated access type, are responsible for dealing with any interactions with tasking. In particular: • • • If the allocators are used in different tasks, they require mutual exclusion. If they are used inside protected objects, they cannot block. If they are used by interrupt handlers (see C.3, “Interrupt Support”), the mutual exclusion mechanism has to work properly in that context. 29 The primitives Allocate, Deallocate, and Storage_Size are declared as abstract (see 3.9.3), and therefore they have to be overridden when a new (nonabstract) storage pool type is declared. 26 27 28 29 30 31 327 13 December 2012 Storage Management 13.11 Ada Reference Manual — 2012 Edition To associate an access type with a storage pool object, the user first declares a pool object of some type derived from Root_Storage_Pool. Then, the user defines its Storage_Pool attribute, as follows: Examples Pool_Object : Some_Storage_Pool_Type; type T is access Designated; for T'Storage_Pool use Pool_Object; Another access type may be added to an existing storage pool, via: for T2'Storage_Pool use T'Storage_Pool; The semantics of this is implementation defined for a standard storage pool. As usual, a derivative of Root_Storage_Pool may define additional operations. For example, consider the Mark_Release_Pool_Type defined in 13.11.6, that has two additional operations, Mark and Release, the following is a possible use: type Mark_Release_Pool_Type (Pool_Size : Storage_Elements.Storage_Count) is new Subpools.Root_Storage_Pool_With_Subpools with private; -- As defined in package MR_Pool, see 13.11.6 ... Our_Pool : Mark_Release_Pool_Type (Pool_Size => 2000); My_Mark : MR_Pool.Subpool_Handle; -- See 13.11.6 type Acc is access ...; for Acc'Storage_Pool use Our_Pool; ... My_Mark := Mark(Our_Pool); ... -- Allocate objects using “new (My_Mark) Designated(...)”. Release(My_Mark); -- Finalize objects and reclaim storage. 32 33 34 35 36 37 38/3 39/3 40 41/3 42/3 43/3 13.11.1 Storage Allocation Attributes 1/3 The Max_Size_In_Storage_Elements and Max_Alignment_For_Allocation attributes may be useful in writing user-defined pool types. 2/3 3/3 For every subtype S, the following attributes are defined: S'Max_Size_In_Storage_Elements Static Semantics Denotes the maximum value for Size_In_Storage_Elements that could be requested by the implementation via Allocate for an access type whose designated subtype is S. The value of this attribute is of type universal_integer. 4/3 S'Max_Alignment_For_Allocation Denotes the maximum value for Alignment that could be requested by the implementation via Allocate for an access type whose designated subtype is S. The value of this attribute is of type universal_integer. 5/3 For a type with access discriminants, if the implementation allocates space for a coextension in the same pool as that of the object having the access discriminant, then these attributes account for any calls on Allocate that could be performed to provide space for such coextensions. 13.11 Storage Management 13 December 2012 328 Ada Reference Manual — 2012 Edition 13.11.2 Unchecked Storage Deallocation Unchecked storage deallocation of an object designated by a value of an access type is achieved by a call to an instance of the generic procedure Unchecked_Deallocation. 1 Static Semantics The following language-defined generic library procedure exists: generic type Object(<>) is limited private; type Name is access Object; procedure Ada.Unchecked_Deallocation(X : in out Name) with Convention => Intrinsic; pragma Preelaborate(Ada.Unchecked_Deallocation); Legality Rules 2 3/3 A call on an instance of Unchecked_Deallocation is illegal if the actual access type of the instance is a type for which the Storage_Size has been specified by a static expression with value zero or is defined by the language to be zero. In addition to the places where Legality Rules normally apply (see 12.3), this rule applies also in the private part of an instance of a generic unit. 3.1/3 Given an instance of Unchecked_Deallocation declared as follows: procedure Free is new Ada.Unchecked_Deallocation( object_subtype_name, access_to_variable_subtype_name); Dynamic Semantics Procedure Free has the following effect: 1. After executing Free(X), the value of X is null. 2. Free(X), when X is already equal to null, has no effect. 3. Free(X), when X is not equal to null first performs finalization of the object designated by X (and any coextensions of the object — see 3.10.2), as described in 7.6.1. It then deallocates the storage occupied by the object designated by X (and any coextensions). If the storage pool is a user-defined object, then the storage is deallocated by calling Deallocate as described in 13.11. There is one exception: if the object being freed contains tasks, the object might not be deallocated. 4 5 6 7 8 9/3 After Free(X), the object designated by X, and any subcomponents (and coextensions) thereof, no longer exist; their storage can be reused for other purposes. 10/2 Bounded (Run-Time) Errors It is a bounded error to free a discriminated, unterminated task object. The possible consequences are: • No exception is raised. • Program_Error or Tasking_Error is raised at the point of the deallocation. • Program_Error or Tasking_Error is raised in the task the next time it references any of the discriminants. In the first two cases, the storage for the discriminants (and for any enclosing object if it is designated by an access discriminant of the task) is not reclaimed prior to task termination. 11 12 13 14 15 329 13 December 2012 Unchecked Storage Deallocation 13.11.2 Ada Reference Manual — 2012 Edition 16/3 Evaluating a name that denotes a nonexistent object, or a protected subprogram or subprogram renaming whose associated object (if any) is nonexistent, is erroneous. The execution of a call to an instance of Unchecked_Deallocation is erroneous if the object was created other than by an allocator for an access type whose pool is Name'Storage_Pool. Erroneous Execution 17 For a standard storage pool, Free should actually reclaim the storage. Implementation Advice 17.1/3 A call on an instance of Unchecked_Deallocation with a nonnull access value should raise Program_Error if the actual access type of the instance is a type for which the Storage_Size has been specified to be zero or is defined by the language to be zero. 18 19 NOTES 30 The rules here that refer to Free apply to any instance of Unchecked_Deallocation. 31 Unchecked_Deallocation cannot be instantiated for an access-to-constant type. This is implied by the rules of 12.5.4. 13.11.3 Default Storage Pools 1/3 This paragraph was deleted. 2/3 3/3 3.1/3 3.2/3 The form of a pragma Default_Storage_Pool is as follows: pragma Default_Storage_Pool (storage_pool_indicator); storage_pool_indicator ::= storage_pool_name | null Syntax A pragma Default_Storage_Pool is allowed immediately within the visible part of a package_specification, immediately within a declarative_part, or as a configuration pragma. 3.3/3 The storage_pool_name is expected to be of type Root_Storage_Pool'Class. Name Resolution Rules 4/3 The storage_pool_name shall denote a variable. Legality Rules 4.1/3 If the pragma is used as a configuration pragma, the storage_pool_indicator shall be null, and it defines the default pool to be null within all applicable compilation units (see 10.1.5), except within the immediate scope of another pragma Default_Storage_Pool. Otherwise, the pragma occurs immediately within a sequence of declarations, and it defines the default pool within the immediate scope of the pragma to be either null or the pool denoted by the storage_pool_name, except within the immediate scope of a later pragma Default_Storage_Pool. Thus, an inner pragma overrides an outer one. 4.2/3 A pragma Default_Storage_Pool shall not be used as a configuration pragma that applies to a compilation unit that is within the immediate scope of another pragma Default_Storage_Pool. Static Semantics 5/3 The language-defined aspect Default_Storage_Pool may be specified for a generic instance; it defines the default pool for access types within an instance. The expected type for the Default_Storage_Pool aspect is Root_Storage_Pool'Class. The aspect_definition must be a name that denotes a variable. This aspect overrides any Default_Storage_Pool pragma that might apply to the generic unit; if the aspect is not specified, the default pool of the instance is that defined for the generic unit. 13.11.2 Unchecked Storage Deallocation 13 December 2012 330 Ada Reference Manual — 2012 Edition For nonderived access types declared in places where the default pool is defined by the pragma or aspect, their Storage_Pool or Storage_Size attribute is determined as follows, unless Storage_Pool or Storage_Size is specified for the type: • If the default pool is null, the Storage_Size attribute is defined by the language to be zero. Therefore, an allocator for such a type is illegal. • If the default pool is nonnull, the Storage_Pool attribute is that pool. Otherwise, there is no default pool; the standard storage pool is used for the type as described in 13.11. This paragraph was deleted. Implementation Permissions An object created by an allocator that is passed as the actual parameter to an access parameter may be allocated on the stack, and automatically reclaimed, regardless of the default pool.. NOTES 32 Default_Storage_Pool may be used with restrictions No_Coextensions and No_Access_Parameter_Allocators (see H.4) to ensure that all allocators use the default pool. 13.11.4 Storage Subpools This subclause defines a package to support the partitioning of a storage pool into subpools. A subpool may be specified as the default to be used for allocation from the associated storage pool, or a particular subpool may be specified as part of an allocator (see 4.8). The following language-defined library package exists: Static Semantics package System.Storage_Pools.Subpools is pragma Preelaborate (Subpools); type Root_Storage_Pool_With_Subpools is abstract new Root_Storage_Pool with private; type Root_Subpool is abstract tagged limited private; type Subpool_Handle is access all Root_Subpool'Class; for Subpool_Handle'Storage_Size use 0; function Create_Subpool (Pool : in out Root_Storage_Pool_With_Subpools) return not null Subpool_Handle is abstract; -- The following operations are intended for pool implementers: function Pool_of_Subpool (Subpool : not null Subpool_Handle) return access Root_Storage_Pool_With_Subpools'Class; procedure Set_Pool_of_Subpool ( Subpool : in not null Subpool_Handle; To : in out Root_Storage_Pool_With_Subpools'Class); procedure Allocate_From_Subpool ( Pool : in out Root_Storage_Pool_With_Subpools; Storage_Address : out Address; Size_In_Storage_Elements : in Storage_Elements.Storage_Count; Alignment : in Storage_Elements.Storage_Count; Subpool : in not null Subpool_Handle) is abstract with Pre'Class => Pool_of_Subpool(Subpool) = Pool'Access; procedure Deallocate_Subpool ( Pool : in out Root_Storage_Pool_With_Subpools; Subpool : in out Subpool_Handle) is abstract with Pre'Class => Pool_of_Subpool(Subpool) = Pool'Access; 6/3 6.1/3 6.2/3 6.3/3 7/3 8/3 9/3 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 331 13 December 2012 Default Storage Pools 13.11.3 13/3 14/3 15/3 16/3 17/3 18/3 19/3 20/3 21/3 22/3 23/3 Ada Reference Manual — 2012 Edition function Default_Subpool_for_Pool ( Pool : in out Root_Storage_Pool_With_Subpools) return not null Subpool_Handle; overriding procedure Allocate ( Pool : in out Root_Storage_Pool_With_Subpools; Storage_Address : out Address; Size_In_Storage_Elements : in Storage_Elements.Storage_Count; Alignment : in Storage_Elements.Storage_Count); overriding procedure Deallocate ( Pool : in out Root_Storage_Pool_With_Subpools; Storage_Address : in Address; Size_In_Storage_Elements : in Storage_Elements.Storage_Count; Alignment : in Storage_Elements.Storage_Count) is null; overriding function Storage_Size (Pool : Root_Storage_Pool_With_Subpools) return Storage_Elements.Storage_Count is (Storage_Elements.Storage_Count'Last); private ... -- not specified by the language end System.Storage_Pools.Subpools; A subpool is a separately reclaimable portion of a storage pool, identified by an object of type Subpool_Handle (a subpool handle). A subpool handle also identifies the enclosing storage pool, a storage pool from Root_Storage_Pool_With_Subpools. A subpool is created by calling Create_Subpool or a similar constructor; the constructor returns the subpool handle. that supports subpools, which is a storage pool whose is descended type A subpool object is an object of a type descended from Root_Subpool. Typically, subpool objects are managed by the containing storage pool; only the handles need be exposed to clients of the storage pool. Subpool objects are designated by subpool handles, and are the run-time representation of a subpool. Each subpool belongs to a single storage pool (which will always be a pool that supports subpools). An access to the pool that a subpool belongs to can be obtained by calling Pool_of_Subpool with the subpool handle. Set_Pool_of_Subpool causes the subpool of the subpool handle to belong to the given pool; this is intended to be called from subpool constructors like Create_Subpool. Set_Pool_of_Subpool propagates Program_Error if the subpool already belongs to a pool. When an allocator for a type whose storage pool supports subpools is evaluated, a call is made on Allocate_From_Subpool passing in a Subpool_Handle, in addition to the parameters as defined for calls on Allocate (see 13.11). The subpool designated by the subpool_handle_name is used, if specified in an allocator. Otherwise, Default_Subpool_for_Pool of the Pool is used to provide a subpool handle. All requirements on the Allocate procedure also apply to Allocate_from_Subpool. Legality Rules If a storage pool that supports subpools is specified as the Storage_Pool for an access type, the access type is called a subpool access type. A subpool access type shall be a pool-specific access type. The accessibility level of a subpool access type shall not be statically deeper than that of the storage pool object. If the specified storage pool object is a storage pool that supports subpools, then the name that denotes the object shall not denote part of a formal parameter, nor shall it denote part of a dereference of a value of a non-library-level general access type. In addition to the places where Legality Rules normally apply (see 12.3), these rules also apply in the private part of an instance of a generic unit. 13.11.4 Storage Subpools 13 December 2012 332 Ada Reference Manual — 2012 Edition Dynamic Semantics When an access type with a specified storage pool is frozen (see 13.14), if the tag of the storage pool object identifies a storage pool that supports subpools, the following checks are made: • • the name used to specify the storage pool object does not denote part of a formal parameter nor part of a dereference of a value of a non-library-level general access type; and the accessibility level of the access type is not deeper than that of the storage pool object. Program_Error is raised if either of these checks fail. A call to Subpools.Allocate(P, Addr, Size, Align) does the following: Allocate_From_Subpool (Root_Storage_Pool_With_Subpools'Class(P), Addr, Size, Align, Subpool => Default_Subpool_for_Pool (Root_Storage_Pool_With_Subpools'Class(P))); An allocator that allocates in a subpool raises Program_Error if the allocated object has task parts. Unless overridden, Default_Subpool_for_Pool propagates Program_Error. When an allocator for a type whose storage pool is of type Root_Storage_Pool'Class is evaluated, but supports subpools, the implementation may call Allocate rather than Allocate_From_Subpool. This will have the same effect, so long as Allocate has not been overridden. Implementation Permissions NOTES the 33 A user-defined storage pool Root_Storage_Pool_With_Subpools subprograms Create_Subpool, overriding Allocate_From_Subpool, and Deallocate_Subpool. Create_Subpool should call Set_Pool_Of_Subpool before returning the subpool handle. To make use of such a pool, a user would declare an object of the type extension, use it to define the Storage_Pool attribute of one or more access types, and then call Create_Subpool to obtain subpool handles associated with the pool. that supports subpools can be implemented by extending type type, primitive and the 34 A user-defined storage pool type that supports subpools may define additional subpool constructors similar to Create_Subpool (these typically will have additional parameters). 35 The pool implementor should override Default_Subpool_For_Pool if the pool is to support a default subpool for the pool. The implementor can override Deallocate if individual object reclamation is to be supported, and can override Storage_Size if there is some limit on the total size of the storage pool. The implementor can override Initialize and Finalize if there is any need for nontrivial initialization and finalization for the pool as a whole. For example, Finalize might reclaim blocks of storage that are allocated over and above the space occupied by the pool object itself. The pool implementor may extend the Root_Subpool type as necessary to carry additional information with each subpool provided by Create_Subpool. 13.11.5 Subpool Reclamation A subpool may be explicitly deallocated using Unchecked_Deallocate_Subpool. The following language-defined library procedure exists: with System.Storage_Pools.Subpools; procedure Ada.Unchecked_Deallocate_Subpool (Subpool : in out System.Storage_Pools.Subpools.Subpool_Handle); Static Semantics If Subpool is null, a call on Unchecked_Deallocate_Subpool has no effect. Otherwise, the subpool is finalized, and Subpool is set to null. 333 13 December 2012 Storage Subpools 13.11.4 24/3 25/3 26/3 27/3 28/3 29/3 30/3 31/3 32/3 33/3 34/3 35/3 1/3 2/3 3/3 4/3 Ada Reference Manual — 2012 Edition Finalization of a subpool has the following effects: • The subpool no longer belongs to any pool; • Any of the objects allocated from the subpool that still exist are finalized in an arbitrary order; • The following dispatching call is then made: Deallocate_Subpool(Pool_of_Subpool(Subpool).all, Subpool); Finalization of a Root_Storage_Pool_With_Subpools object finalizes all subpools that belong to that pool that have not yet been finalized. 13.11.6 Storage Subpool Example Examples The following example is a simple but complete implementation of the classic Mark/Release pool using subpools: with System.Storage_Pools.Subpools; with System.Storage_Elements; with Ada.Unchecked_Deallocate_Subpool; package MR_Pool is use System.Storage_Pools; -- For uses of Subpools. use System.Storage_Elements; -- For uses of Storage_Count and Storage_Array. -- Mark and Release work in a stack fashion, and allocations are not allowed -- from a subpool other than the one at the top of the stack. This is also -- the default pool. subtype Subpool_Handle is Subpools.Subpool_Handle; type Mark_Release_Pool_Type (Pool_Size : Storage_Count) is new Subpools.Root_Storage_Pool_With_Subpools with private; function Mark (Pool : in out Mark_Release_Pool_Type) return not null Subpool_Handle; procedure Release (Subpool : in out Subpool_Handle) renames Ada.Unchecked_Deallocate_Subpool; private type MR_Subpool is new Subpools.Root_Subpool with record Start : Storage_Count; end record; subtype Subpool_Indexes is Positive range 1 .. 10; type Subpool_Array is array (Subpool_Indexes) of aliased MR_Subpool; type Mark_Release_Pool_Type (Pool_Size : Storage_Count) is new Subpools.Root_Storage_Pool_With_Subpools with record Storage : Storage_Array (0 .. Pool_Size-1); Next_Allocation : Storage_Count := 0; Markers : Subpool_Array; Current_Pool : Subpool_Indexes := 1; end record; overriding function Create_Subpool (Pool : in out Mark_Release_Pool_Type) return not null Subpool_Handle; function Mark (Pool : in out Mark_Release_Pool_Type) return not null Subpool_Handle renames Create_Subpool; 5/3 6/3 7/3 8/3 9/3 10/3 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 13.11.5 Subpool Reclamation 13 December 2012 334 Ada Reference Manual — 2012 Edition overriding procedure Allocate_From_Subpool ( Pool : in out Mark_Release_Pool_Type; Storage_Address : out System.Address; Size_In_Storage_Elements : in Storage_Count; Alignment : in Storage_Count; Subpool : not null Subpool_Handle); overriding procedure Deallocate_Subpool ( Pool : in out Mark_Release_Pool_Type; Subpool : in out Subpool_Handle); overriding function Default_Subpool_for_Pool (Pool : in out Mark_Release_Pool_Type) return not null Subpool_Handle; overriding procedure Initialize (Pool : in out Mark_Release_Pool_Type); -- We don't need Finalize. end MR_Pool; package body MR_Pool is use type Subpool_Handle; procedure Initialize (Pool : in out Mark_Release_Pool_Type) is -- Initialize the first default subpool. begin Pool.Markers(1).Start := 1; Subpools.Set_Pool_of_Subpool (Pool.Markers(1)'Unchecked_Access, Pool); end Initialize; function Create_Subpool (Pool : in out Mark_Release_Pool_Type) return not null Subpool_Handle is -- Mark the current allocation location. begin if Pool.Current_Pool = Subpool_Indexes'Last then raise Storage_Error; -- No more subpools. end if; Pool.Current_Pool := Pool.Current_Pool + 1; -- Move to the next subpool return Result : constant not null Subpool_Handle := Pool.Markers(Pool.Current_Pool)'Unchecked_Access do Pool.Markers(Pool.Current_Pool).Start := Pool.Next_Allocation; Subpools.Set_Pool_of_Subpool (Result, Pool); end return; end Create_Subpool; procedure Deallocate_Subpool ( Pool : in out Mark_Release_Pool_Type; Subpool : in out Subpool_Handle) is begin if Subpool /= Pool.Markers(Pool.Current_Pool)'Unchecked_Access then raise Program_Error; -- Only the last marked subpool can be released. end if; if Pool.Current_Pool /= 1 then Pool.Next_Allocation := Pool.Markers(Pool.Current_Pool).Start; Pool.Current_Pool := Pool.Current_Pool - 1; -- Move to the previous subpool else -- Reinitialize the default subpool: Pool.Next_Allocation := 1; Subpools.Set_Pool_of_Subpool (Pool.Markers(1)'Unchecked_Access, Pool); end if; end Deallocate_Subpool; 14/3 15/3 16/3 17/3 18/3 19/3 20/3 21/3 22/3 23/3 24/3 25/3 335 13 December 2012 Storage Subpool Example 13.11.6 Ada Reference Manual — 2012 Edition function Default_Subpool_for_Pool (Pool : in out Mark_Release_Pool_Type) return not null Subpool_Handle is begin return Pool.Markers(Pool.Current_Pool)'Unchecked_Access; end Default_Subpool_for_Pool; procedure Allocate_From_Subpool ( Pool : in out Mark_Release_Pool_Type; Storage_Address : out System.Address; Size_In_Storage_Elements : in Storage_Count; Alignment : in Storage_Count; Subpool : not null Subpool_Handle) is begin if Subpool /= Pool.Markers(Pool.Current_Pool)'Unchecked_Access then raise Program_Error; -- Only the last marked subpool can be used for allocations. end if; -- Correct the alignment if necessary: Pool.Next_Allocation := Pool.Next_Allocation + ((-Pool.Next_Allocation) mod Alignment); if Pool.Next_Allocation + Size_In_Storage_Elements > Pool.Pool_Size then raise Storage_Error; -- Out of space. end if; Storage_Address := Pool.Storage (Pool.Next_Allocation)'Address; Pool.Next_Allocation := Pool.Next_Allocation + Size_In_Storage_Elements; end Allocate_From_Subpool; end MR_Pool; 13.12 Pragma Restrictions and Pragma Profile A pragma Restrictions expresses the user's intent to abide by certain restrictions. A pragma Profile expresses the user's intent to abide by a set of Restrictions or other specified run-time policies. These may facilitate the construction of simpler run-time environments. The form of a pragma Restrictions is as follows: pragma Restrictions(restriction{, restriction}); Syntax restriction ::= restriction_identifier | restriction_parameter_identifier => restriction_parameter_argument 26/3 27/3 28/3 29/3 1/3 2 3 4/2 4.1/2 restriction_parameter_argument ::= name | expression Name Resolution Rules 5 6 Unless otherwise specified for a particular restriction, the expression is expected to be of any integer type. Unless otherwise specified for a particular restriction, the expression shall be static, and its value shall be nonnegative. Legality Rules Paragraph 7 was deleted. 8/3 A pragma Restrictions is a configuration pragma. If a pragma Restrictions applies to any compilation unit included in the partition, this may impose either (or both) of two kinds of requirements, as specified for the particular restriction: Post-Compilation Rules 13.11.6 Storage Subpool Example 13 December 2012 336 Ada Reference Manual — 2012 Edition • A restriction may impose requirements on some or all of the units comprising the partition. Unless otherwise specified for a particular restriction, such a requirement applies to all of the units comprising the partition and is enforced via a post-compilation check. • A restriction may impose requirements on the run-time behavior of the program, as indicated by the specification of run-time behavior associated with a violation of the requirement. For the purpose of checking whether a partition contains constructs that violate any restriction (unless specified otherwise for a particular restriction): • Generic instances are logically expanded at the point of instantiation; • If an object of a type is declared or allocated and not explicitly initialized, then all expressions appearing in the definition for the type and any of its ancestors are presumed to be used; • A default_expression for a formal parameter or a generic formal object is considered to be used if and only if the corresponding actual parameter is not provided in a given call or instantiation. Implementation Permissions An implementation may provide implementation-defined restrictions; the identifier for an implementation- defined restriction shall differ from those of the language-defined restrictions. An implementation may place limitations on the values of the expression that are supported, and limitations on the supported combinations of restrictions. The consequences of violating such limitations are implementation defined. An implementation is permitted to omit restriction checks for code that is recognized at compile time to be unreachable and for which no code is generated. Whenever enforcement of a restriction is not required prior to execution, an implementation may nevertheless enforce the restriction prior to execution of a partition to which the restriction applies, provided that every execution of the partition would violate the restriction. The form of a pragma Profile is as follows: pragma Profile (profile_identifier {, profile_pragma_argument_association}); Syntax The profile_identifier shall be the name of a usage profile. The semantics of any profile_pragma_- argument_associations are defined by the usage profile specified by the profile_identifier. Legality Rules 8.1/3 8.2/3 8.3/1 8.4/1 8.5/1 8.6/1 8.7/3 9 9.1/1 9.2/1 10/3 11/3 12/3 A profile is equivalent to the set of configuration pragmas that is defined for each usage profile. 13/3 Static Semantics A pragma Profile is a configuration pragma. There may be more than one pragma Profile for a partition. 14/3 Post-Compilation Rules Implementation Permissions implementation may provide An implementation-defined usage profile shall differ from those of the language-defined usage profiles. implementation-defined usage profiles; the identifier for an NOTES 36 Restrictions intended to facilitate the construction of efficient tasking run-time systems are defined in D.7. Restrictions intended for use when constructing high integrity systems are defined in H.4. 337 13 December 2012 Pragma Restrictions and Pragma Profile 13.12 15/3 16/2 Ada Reference Manual — 2012 Edition 17 37 An implementation has to enforce the restrictions in cases where enforcement is required, even if it chooses not to take advantage of the restrictions in terms of efficiency. 13.12.1 Language-Defined Restrictions and Profiles Static Semantics 1/2 The following restriction_identifiers are language defined (additional restrictions are defined in the Specialized Needs Annexes): 1.1/3 No_Implementation_Aspect_Specifications There are no implementation-defined aspects specified by an aspect_specification. This restriction applies only to the current compilation or environment, not the entire partition. 2/2 No_Implementation_Attributes There are no implementation-defined attributes. This restriction applies only to the current compilation or environment, not the entire partition. 2.1/3 No_Implementation_Identifiers There are no usage names that denote declarations with implementation-defined identifiers that occur within language-defined packages or instances of language-defined generic packages. Such identifiers can arise as follows: • The following language-defined packages and generic packages allow implementation-defined identifiers: • package System (see 13.7); • package Standard (see A.1); • package Ada.Command_Line (see A.15); • package Interfaces.C (see B.3); • package Interfaces.C.Strings (see B.3.1); • package Interfaces.C.Pointers (see B.3.2); • package Interfaces.COBOL (see B.4); • package Interfaces.Fortran (see B.5); • The following language-defined packages contain only implementation-defined identifiers: • package System.Machine_Code (see 13.8); • package Ada.Directories.Information (see A.16); • nested Implementation packages of the Queue containers (see A.18.28-31); • package Interfaces (see B.2); • package Ada.Interrupts.Names (see C.3.2). For package Standard, Standard.Long_Integer and Standard.Long_Float are considered language-defined identifiers, but identifiers such as Standard.Short_Short_Integer are considered implementation-defined. This restriction applies only to the current compilation or environment, not the entire partition. 2.2/3 2.3/3 2.4/3 2.5/3 2.6/3 2.7/3 2.8/3 2.9/3 2.10/3 2.11/3 2.12/3 2.13/3 2.14/3 2.15/3 2.16/3 2.17/3 2.18/3 13.12 Pragma Restrictions and Pragma Profile 13 December 2012 338 Ada Reference Manual — 2012 Edition No_Implementation_Pragmas There are no implementation-defined pragmas or pragma arguments. This restriction applies only to the current compilation or environment, not the entire partition. No_Implementation_Units There is no mention in the context_clause of any implementation-defined descendants of packages Ada, Interfaces, or System. This restriction applies only to the current compilation or environment, not the entire partition. No_Obsolescent_Features There is no use of language features defined in Annex J. It is implementation defined whether uses of the renamings of J.1 and of the pragmas of J.15 are detected by this restriction. This restriction applies only to the current compilation or environment, not the entire partition. The following restriction_parameter_identifiers are language defined: No_Dependence Specifies a library unit on which there are no semantic dependences. No_Specification_of_Aspect Identifies an aspect for which no aspect_specification, attribute_definition_clause, or pragma is given. No_Use_Of_Attribute Identifies an attribute for which no attribute_reference or attribute_definition_clause is given. No_Use_Of_Pragma Identifies a pragma which is not to be used. Legality Rules The restriction_parameter_argument of a No_Dependence restriction shall be a name; the name shall have the form of a full expanded name of a library unit, but need not denote a unit present in the environment. The restriction_parameter_argument of a No_Specification_of_Aspect restriction shall be an identifier; this is an identifier specific to a pragma (see 2.8) and does not denote any declaration. The restriction_parameter_argument of a No_Use_Of_Attribute restriction shall be an identifier or one of the reserved words Access, Delta, Digits, Mod, or Range; this is an identifier specific to a pragma. The restriction_parameter_argument of a No_Use_Of_Pragma restriction shall be an identifier or the reserved word Interface; this is an identifier specific to a pragma. 3/2 3.1/3 4/3 5/3 6/2 6.1/3 6.2/3 6.3/3 7/2 7.1/3 7.2/3 7.3/3 No compilation unit included in the partition shall depend semantically on the library unit identified by the name of a No_Dependence restriction. 8/3 Post-Compilation Rules The following profile_identifier is language defined: No_Implementation_Extensions Static Semantics For profile_pragma_argument_associations. profile usage No_Implementation_Extensions, 9/3 10/3 there shall be no 11/3 339 13 December 2012 Language-Defined Restrictions and Profiles 13.12.1 12/3 13/3 1 1 2 3/2 4/1 5 6 7 8/2 Ada Reference Manual — 2012 Edition The No_Implementation_Extensions usage profile is equivalent to the following restrictions: No_Implementation_Aspect_Specifications, No_Implementation_Attributes, No_Implementation_Identifiers, No_Implementation_Pragmas, No_Implementation_Units. 13.13 Streams A stream is a sequence of elements comprising values from possibly different types and allowing sequential access to these values. A stream type is a type in the class whose root type is Streams.Root_Stream_Type. A stream type may be implemented in various ways, such as an external sequential file, an internal buffer, or a network channel. 13.13.1 The Package Streams Static Semantics The abstract type Root_Stream_Type is the root type of the class of stream types. The types in this class represent different kinds of streams. A new stream type is defined by extending the root type (or some other stream type), overriding the Read and Write operations, and optionally defining additional primitive subprograms, according to the requirements of the particular kind of stream. The predefined stream- oriented attributes like T'Read and T'Write make dispatching calls on the Read and Write procedures of the Root_Stream_Type. (User-defined T'Read and T'Write attributes can also make such calls, or can call the Read and Write attributes of other types.) package Ada.Streams is pragma Pure(Streams); type Root_Stream_Type is abstract tagged limited private; pragma Preelaborable_Initialization(Root_Stream_Type); type Stream_Element is mod implementation-defined; type Stream_Element_Offset is range implementation-defined; subtype Stream_Element_Count is Stream_Element_Offset range 0..Stream_Element_Offset'Last; type Stream_Element_Array is array(Stream_Element_Offset range <>) of aliased Stream_Element; procedure Read( Stream : in out Root_Stream_Type; Item : out Stream_Element_Array; Last : out Stream_Element_Offset) is abstract; procedure Write( Stream : in out Root_Stream_Type; Item : in Stream_Element_Array) is abstract; private ... -- not specified by the language end Ada.Streams; The Read operation transfers stream elements from the specified stream to fill the array Item. Elements are transferred until Item'Length elements have been transferred, or until the end of the stream is reached. If any elements are transferred, the index of the last stream element transferred is returned in Last. Otherwise, Item'First - 1 is returned in Last. Last is less than Item'Last only if the end of the stream is reached. 9 The Write operation appends Item to the specified stream. 13.12.1 Language-Defined Restrictions and Profiles 13 December 2012 340 Ada Reference Manual — 2012 Edition Implementation Permissions If Stream_Element'Size is not a multiple of System.Storage_Unit, then the components of Stream_- Element_Array need not be aliased. 9.1/1 NOTES 38 See A.12.1, “The Package Streams.Stream_IO” for an example of extending type Root_Stream_Type. 10 39 If the end of stream has been reached, and Item'First is Stream_Element_Offset'First, Read will raise Constraint_Error. 11/2 13.13.2 Stream-Oriented Attributes The type-related operational attributes Write, Read, Output, and Input convert values to a stream of elements and reconstruct values from a stream. 1/3 For every subtype S of an elementary type T, the following representation attribute is defined: Static Semantics S'Stream_Size Denotes the number of bits read from or written to a stream by the default implementations of S'Read and S'Write. Hence, the number of stream elements required per item of elementary type T is: T'Stream_Size / Ada.Streams.Stream_Element'Size The value of Stream_Element'Size. this attribute is of type universal_integer and is a multiple of Stream_Size may be specified for first subtypes via an attribute_definition_clause; the expression of such a clause shall be static, nonnegative, and a multiple of Stream_Element'Size. Implementation Advice If not specified, the value of Stream_Size for an elementary type should be the number of bits that corresponds to the minimum number of stream elements required by the first subtype of the type, rounded up to the nearest factor or multiple of the word size that is also a multiple of the stream element size. The recommended level of support for the Stream_Size attribute is: • A Stream_Size clause should be supported for a discrete or fixed point type T if the specified Stream_Size is a multiple of Stream_Element'Size and is no less than the size of the first subtype of T, and no greater than the size of the largest type of the same elementary class (signed integer, modular integer, enumeration, ordinary fixed point, or decimal fixed point). For every subtype S of a specific type T, the following attributes are defined. S'Write S'Write denotes a procedure with the following specification: Static Semantics procedure S'Write( Stream : not null access Ada.Streams.Root_Stream_Type'Class; Item : in T) S'Write writes the value of Item to Stream. S'Read S'Read denotes a procedure with the following specification: procedure S'Read( Stream : not null access Ada.Streams.Root_Stream_Type'Class; Item : out T) S'Read reads the value of Item from Stream. 1.1/2 1.2/3 1.3/2 1.4/2 1.5/2 1.6/2 1.7/2 1.8/2 2 3 4/2 5 6 7/2 8 341 13 December 2012 The Package Streams 13.13.1 Ada Reference Manual — 2012 Edition 8.1/3 For an untagged derived type, the Write (resp. Read) attribute is inherited according to the rules given in 13.1 if the attribute is specified and available for the parent type at the point where T is declared. For a tagged derived type, these attributes are not inherited, but rather the default implementations are used. 8.2/2 The default implementations of the Write and Read attributes, where available, execute as follows: 9/3 9.1/3 9.2/3 10 11 12/2 13 14 15/2 16 18 19 For elementary types, Read reads (and Write writes) the number of stream elements implied by the Stream_Size for the type T; the representation of those stream elements is implementation defined. For composite types, the Write or Read attribute for each component is called in canonical order, which is last dimension varying fastest for an array (unless the convention of the array is Fortran, in which case it is first dimension varying fastest), and positional aggregate order for a record. Bounds are not included in the stream if T is an array type. If T is a discriminated type, discriminants are included only if they have defaults. If T is a tagged type, the tag is not included. For type extensions, the Write or Read attribute for the parent type is called, followed by the Write or Read attribute of each component of the extension part, in canonical order. For a limited type extension, if the attribute of the parent type or any progenitor type of T is available anywhere within the immediate scope of T, and the attribute of the parent type or the type of any of the extension components is not available at the freezing point of T, then the attribute of T shall be directly specified. If T is a discriminated type and its discriminants have defaults, then S'Read first reads the discriminants from the stream without modifying Item. S'Read then creates an object of type T constrained by these discriminants. The value of this object is then converted to the subtype of Item and is assigned to Item. Finally, the Read attribute for each nondiscriminant component of Item is called in canonical order as described above. Normal default initialization and finalization take place for the created object. Constraint_Error is raised by the predefined Write attribute if the value of the elementary item is outside the range of values representable using Stream_Size bits. For a signed integer type, an enumeration type, or a fixed point type, the range is unsigned only if the integer code for the lower bound of the first subtype is nonnegative, and a (symmetric) signed range that covers all values of the first subtype would require more than Stream_Size bits; otherwise, the range is signed. For every subtype S'Class of a class-wide type T'Class: S'Class'Write S'Class'Write denotes a procedure with the following specification: procedure S'Class'Write( Stream : not null access Ada.Streams.Root_Stream_Type'Class; Item : in T'Class) Dispatches to the subprogram denoted by the Write attribute of the specific type identified by the tag of Item. S'Class'Read S'Class'Read denotes a procedure with the following specification: procedure S'Class'Read( Stream : not null access Ada.Streams.Root_Stream_Type'Class; Item : out T'Class) Dispatches to the subprogram denoted by the Read attribute of the specific type identified by the tag of Item. Paragraph 17 was deleted. For every subtype S of a specific type T, the following attributes are defined. S'Output S'Output denotes a procedure with the following specification: Static Semantics 13.13.2 Stream-Oriented Attributes 13 December 2012 342 Ada Reference Manual — 2012 Edition procedure S'Output( Stream : not null access Ada.Streams.Root_Stream_Type'Class; Item : in T) S'Output writes the value of Item to Stream, including any bounds or discriminants. S'Input S'Input denotes a function with the following specification: function S'Input( Stream : not null access Ada.Streams.Root_Stream_Type'Class) return T S'Input reads and returns one value from Stream, using any bounds or discriminants written by a corresponding S'Output to determine how much to read. For an untagged derived type, the Output (resp. Input) attribute is inherited according to the rules given in 13.1 if the attribute is specified and available for the parent type at the point where T is declared. For a tagged derived type, these attributes are not inherited, but rather the default implementations are used. The default implementations of the Output and Input attributes, where available, execute as follows: • If T is an array type, S'Output first writes the bounds, and S'Input first reads the bounds. If T has discriminants without defaults, S'Output first writes the discriminants (using the Write attribute of the discriminant type for each), and S'Input first reads the discriminants (using the Read attribute of the discriminant type for each). • S'Output then calls S'Write to write the value of Item to the stream. S'Input then creates an object of type T, with the bounds or (when without defaults) the discriminants, if any, taken from the stream, passes it to S'Read, and returns the value of the object. If T has discriminants, then this object is unconstrained if and only the discriminants have defaults. Normal default initialization and finalization take place for this object (see 3.3.1, 7.6, and 7.6.1). If T is an abstract type, then S'Input is an abstract function. For every subtype S'Class of a class-wide type T'Class: S'Class'Output S'Class'Input S'Class'Output denotes a procedure with the following specification: procedure S'Class'Output( Stream : not null access Ada.Streams.Root_Stream_Type'Class; Item : in T'Class) First writes the external tag of Item to Stream (by calling String'Output(Stream, Tags.- External_Tag(Item'Tag)) — see 3.9) and then dispatches to the subprogram denoted by the Output attribute of the specific type identified by the tag. Tag_Error is raised if the tag of Item identifies a type declared at an accessibility level deeper than that of S. S'Class'Input denotes a function with the following specification: function S'Class'Input( Stream : not null access Ada.Streams.Root_Stream_Type'Class) return T'Class First reads the external tag from Stream and determines the corresponding internal tag (by calling Tags.Descendant_Tag(String'Input(Stream), S'Tag) which might raise Tag_Error — see 3.9) and then dispatches to the subprogram denoted by the Input attribute of the specific type identified by the internal tag; returns that result. If the specific type identified by the internal tag is abstract, Constraint_Error is raised. 20/2 21 22 23/2 24 25/3 25.1/2 26/3 27/3 27.1/2 28 29 30/2 31/2 32 33/2 34/3 In the default implementation of Read and Input for a composite type, for each scalar component that is a discriminant or that has an implicit initial value, a check is made that the value returned by Read for the component belongs to its subtype. Constraint_Error is raised if this check fails. For other scalar 35/3 343 13 December 2012 Stream-Oriented Attributes 13.13.2 Ada Reference Manual — 2012 Edition components, no check is made. For each component that is of an access type, if the implementation can detect that the value returned by Read for the component is not a value of its subtype, Constraint_Error is raised. If the value is not a value of its subtype and this error is not detected, the component has an abnormal value, and erroneous execution can result (see 13.9.1). In the default implementation of Read for a composite type with defaulted discriminants, if the actual parameter of Read is constrained, a check is made that the discriminants read from the stream are equal to those of the actual parameter. Constraint_Error is raised if this check fails. It is unspecified at which point and in which order these checks are performed. In particular, if Constraint_Error is raised due to the failure of one of these checks, it is unspecified how many stream elements have been read from the stream. In the default implementation of Read and Input for a type, End_Error is raised if the end of the stream is reached before the reading of a value of the type is completed. The stream-oriented attributes may be specified for any type via an attribute_definition_clause. The subprogram name given in such a clause shall statically denote a subprogram that is not an abstract subprogram. Furthermore, if a stream-oriented attribute is specified for an interface type by an attribute_definition_clause, the subprogram name given in the clause shall statically denote a null procedure. A stream-oriented attribute for a subtype of a specific type T is available at places where one of the following conditions is true: • T is nonlimited. • The attribute_designator is Read (resp. Write) and T is a limited record extension, and the attribute Read (resp. Write) is available for the parent type of T and for the types of all of the extension components. • T is a limited untagged derived type, and the attribute was inherited for the type. • The attribute_designator is Input (resp. Output), and T is a limited type, and the attribute Read (resp. Write) is available for T. • The attribute has been attribute_definition_clause is visible. specified via an attribute_definition_clause, and the A stream-oriented attribute for a subtype of a class-wide type T'Class is available at places where one of the following conditions is true: • T is nonlimited; • attribute the specified has attribute_definition_clause is visible; or been via an attribute_definition_clause, and the 36/2 37/1 38/3 39/2 40/2 41/2 42/2 43/2 44/2 45/2 46/2 47/2 48/2 • the corresponding attribute of T is available, provided that if T has a partial view, the corresponding attribute is available at the end of the visible part where T is declared. 49/2 50/3 An attribute_reference for one of the stream-oriented attributes is illegal unless the attribute is available at the place of the attribute_reference. Furthermore, an attribute_reference for T'Input is illegal if T is an abstract type. In the parameter_and_result_profiles for the default implementations of the stream-oriented attributes, the subtype of the Item parameter is the base subtype of T if T is a scalar type, and the first subtype otherwise. The same rule applies to the result of the Input attribute. 13.13.2 Stream-Oriented Attributes 13 December 2012 344 Ada Reference Manual — 2012 Edition For an attribute_definition_clause specifying one of these attributes, the subtype of the Item parameter shall be the first subtype or the base subtype if scalar, and the first subtype if not scalar. The same rule applies to the result of the Input function. A type is said to support external streaming if Read and Write attributes are provided for sending values of such a type between active partitions, with Write marshalling the representation, and Read unmarshalling the representation. A limited type supports external streaming only if it has available Read and Write attributes. A type with a part that is of a nonremote access type supports external streaming only if that access type or the type of some part that includes the access type component, has Read and Write attributes that have been specified via an attribute_definition_clause, and that attribute_definition_clause is visible. An anonymous access type does not support external streaming. All other types (including remote access types, see E.2.2) support external streaming. 51/3 52/3 If the internal tag returned by Descendant_Tag to T'Class'Input identifies a type that is not library-level and whose tag has not been created, or does not exist in the partition at the time of the call, execution is erroneous. 53/2 Erroneous Execution Implementation Requirements For every subtype S of a language-defined nonlimited specific type T, the output generated by S'Output or S'Write shall be readable by S'Input or S'Read, respectively. This rule applies across partitions if the implementation conforms to the Distributed Systems Annex. 54/1 If Constraint_Error is raised during a call to Read because of failure of one the above checks, the implementation shall ensure that the discriminants of the actual parameter of Read are not modified. 55/3 Implementation Permissions The number of calls performed by the predefined implementation of the stream-oriented attributes on the Read and Write operations of the stream type is unspecified. An implementation may take advantage of this permission to perform internal buffering. However, all the calls on the Read and Write operations of the stream type needed to implement an explicit invocation of a stream-oriented attribute shall take place before this invocation returns. An explicit invocation is one appearing explicitly in the program text, possibly through a generic instantiation (see 12.3). If T is a discriminated type and its discriminants have defaults, then in two cases an execution of the default implementation of S'Read is not required to create an anonymous object of type T: If the discriminant values that are read in are equal to the corresponding discriminant values of Item, then no object of type T need be created and Item may be used instead. If they are not equal and Item is a constrained variable, then Constraint_Error may be raised at that point, before any further values are read from the stream and before the object of type T is created. 56/3 56.1/3 A default implementation of S'Input that calls the default implementation of S'Read may create a constrained anonymous object with discriminants that match those in the stream. 56.2/3 NOTES 40 For a definite subtype S of a type T, only T'Write and T'Read are needed to pass an arbitrary value of the subtype through a stream. For an indefinite subtype S of a type T, T'Output and T'Input will normally be needed, since T'Write and T'Read do not pass bounds, discriminants, or tags. 41 User-specified attributes of S'Class are not inherited by other class-wide types descended from S. 57 58 345 13 December 2012 Stream-Oriented Attributes 13.13.2 Ada Reference Manual — 2012 Edition 59 Example of user-defined Write attribute: Examples 60/2 1/3 2 2.1/3 3/3 4/1 5/3 6 7 7.1/2 7.2/3 8/3 procedure My_Write( Stream : not null access Ada.Streams.Root_Stream_Type'Class; Item : My_Integer'Base); for My_Integer'Write use My_Write; 13.14 Freezing Rules This subclause defines a place in the program text where each declared entity becomes “frozen.” A use of an entity, such as a reference to it by name, or (for a type) an expression of the type, causes freezing of the entity in some contexts, as described below. The Legality Rules forbid certain kinds of uses of an entity in the region of text where it is frozen. The freezing of an entity occurs at one or more places (freezing points) in the program text where the representation for the entity has to be fully determined. Each entity is frozen from its first freezing point to the end of the program text (given the ordering of compilation units defined in 10.1.4). This subclause also defines a place in the program text where the profile of each declared callable entity becomes frozen. A use of a callable entity causes freezing of its profile in some contexts, as described below. At the place where the profile of a callable entity becomes frozen, the entity itself becomes frozen. The end of a declarative_part, protected_body, or a declaration of a library package or generic library package, causes freezing of each entity and profile declared within it, except for incomplete types. A noninstance body other than a renames-as-body causes freezing of each entity and profile declared before it within the same declarative_part that is not an incomplete type; it only causes freezing of an incomplete type if the body is within the immediate scope of the incomplete type. A construct that (explicitly or implicitly) references an entity can cause the freezing of the entity, as defined by subsequent paragraphs. At the place where a construct causes freezing, each name, expression, implicit_dereference, or range within the construct causes freezing: • The occurrence of a generic_instantiation causes freezing, except that a name which is a generic actual parameter whose corresponding generic formal parameter is a formal incomplete type (see 12.5.1) does not cause freezing. In addition, if a parameter of the instantiation is defaulted, the default_expression or default_name for that parameter causes freezing. • The occurrence of an object_declaration that has no corresponding completion causes freezing. • The declaration of a record extension causes freezing of the parent subtype. • The declaration of a record extension, interface type, task unit, or protected unit causes freezing of any progenitor types specified in the declaration. • At the freezing point of the entity associated with an aspect_specification, any expressions or names within the aspect_specification cause freezing. Any static expressions within an aspect_specification also cause freezing at the end of the immediately enclosing declaration list. A static expression (other than within an aspect_specification) causes freezing where it occurs. An object name or nonstatic expression causes freezing where it occurs, unless the name or expression is part of a default_expression, a default_name, the expression of an expression function, an aspect_specification, or a per-object expression of a component's constraint, in which case, the freezing occurs later as part of another construct or at the freezing point of an associated entity. 8.1/3 An implicit call freezes the same entities and profiles that would be frozen by an explicit call. This is true even if the implicit call is removed via implementation permissions. 13.13.2 Stream-Oriented Attributes 13 December 2012 346 Ada Reference Manual — 2012 Edition If an expression is implicitly converted to a type or subtype T, then at the place where the expression causes freezing, T is frozen. 8.2/1 The following rules define which entities are frozen at the place where a construct causes freezing: • At the place where an expression causes freezing, the type of the expression is frozen, unless the expression is an enumeration literal used as a discrete_choice of the array_aggregate of an enumeration_representation_clause. • At the place where a function call causes freezing, the profile of the function is frozen. Furthermore, if a parameter of the call is defaulted, the default_expression for that parameter causes freezing. If the function call is to an expression function, the expression of the expression function causes freezing. • At the place where a generic_instantiation causes freezing of a callable entity, the profile of that entity is frozen unless the formal subprogram corresponding to the callable entity has a parameter or result of a formal untagged incomplete type; if the callable entity is an expression function, the expression of the expression function causes freezing. • At the place where a use of the Access or Unchecked_Access attribute whose prefix denotes an expression function causes freezing, the expression of the expression function causes freezing. • At the place where a name causes freezing, the entity denoted by the name is frozen, unless the name is a prefix of an expanded name; at the place where an object name causes freezing, the nominal subtype associated with the name is frozen. 9 10 10.1/3 10.2/3 10.3/3 11 • At the place where an implicit_dereference causes freezing, the nominal subtype associated with 11.1/1 the implicit_dereference is frozen. • At the place where a range causes freezing, the type of the range is frozen. • At the place where an allocator causes freezing, the designated subtype of its type is frozen. If the type of the allocator is a derived type, then all ancestor types are also frozen. • At the place where a profile is frozen, each subtype of the profile is frozen. If the corresponding callable entity is a member of an entry family, the index subtype of the family is frozen. • At the place where a subtype is frozen, its type is frozen. At the place where a type is frozen, any expressions or names within the full type definition cause freezing; the first subtype, and any component subtypes, index subtypes, and parent subtype of the type are frozen as well. For a specific tagged type, the corresponding class-wide type is frozen as well. For a class-wide type, the corresponding specific type is frozen as well. • At the place where a specific tagged type is frozen, the primitive subprograms of the type are in an is frozen, any subprogram named frozen. At the place where a attribute_definition_clause for the type is frozen. type Legality Rules The explicit declaration of a primitive subprogram of a tagged type shall occur before the type is frozen (see 3.9.2). A type shall be completely defined before it is frozen (see 3.11.1 and 7.3). The completion of a deferred constant declaration shall occur before the constant is frozen (see 7.4). An operational or representation item that directly specifies an aspect of an entity shall appear before the entity is frozen (see 13.1). The tag (see 3.9) of a tagged type T is created at the point where T is frozen. Dynamic Semantics 347 13 December 2012 Freezing Rules 13.14 12 13 14/3 15 15.1/3 16 17 18 19/1 20/2 Ada Reference Manual — 2012 Edition The Standard Libraries 349 13 December 2012 The Standard Libraries Ada Reference Manual — 2012 Edition Annex A (normative) Predefined Language Environment This Annex contains the specifications of library units that shall be provided by every implementation. There are three root library units: Ada, Interfaces, and System; other library units are children of these: 1 2/3 Standard — A.1 Ada — A.2 Assertions — 11.4.2 Asynchronous_Task_Control — D.11 Calendar — 9.6 Arithmetic — 9.6.1 Formatting — 9.6.1 Time_Zones — 9.6.1 Characters — A.3.1 Conversions — A.3.4 Handling — A.3.2 Latin_1 — A.3.3 Command_Line — A.15 Complex_Text_IO — G.1.3 Containers — A.18.1 Bounded_Doubly_Linked_Lists — A.18.20 Bounded_Hashed_Maps — A.18.21 Bounded_Hashed_Sets — A.18.23 Bounded_Multiway_Trees — A.18.25 Bounded_Ordered_Maps — A.18.22 Bounded_Ordered_Sets — A.18.24 Bounded_Priority_Queues — A.18.31 Bounded_Synchronized_Queues — A.18.29 Bounded_Vectors — A.18.19 Doubly_Linked_Lists — A.18.3 Generic_Array_Sort — A.18.26 Generic_Constrained_Array_Sort — A.18.26 Generic_Sort — A.18.26 Hashed_Maps — A.18.5 Hashed_Sets — A.18.8 Indefinite_Doubly_Linked_Lists — A.18.12 Indefinite_Hashed_Maps — A.18.13 Indefinite_Hashed_Sets — A.18.15 Indefinite_Holders — A.18.18 Indefinite_Multiway_Trees — A.18.17 Indefinite_Ordered_Maps — A.18.14 Indefinite_Ordered_Sets — A.18.16 Indefinite_Vectors — A.18.11 Standard (...continued) Ada (...continued) Containers (...continued) Multiway_Trees — A.18.10 Ordered_Maps — A.18.6 Ordered_Sets — A.18.9 Synchronized_Queue_Interfaces — A.18.27 Unbounded_Priority_Queues — A.18.30 Unbounded_Synchronized_Queues — A.18.28 Vectors — A.18.2 Decimal — F.2 Direct_IO — A.8.4 Directories — A.16 Hierarchical_File_Names — A.16.1 Information — A.16 Dispatching — D.2.1 EDF — D.2.6 Non_Preemptive — D.2.4 Round_Robin — D.2.5 Dynamic_Priorities — D.5.1 Environment_Variables — A.17 Exceptions — 11.4.1 Execution_Time — D.14 Group_Budgets — D.14.2 Interrupts — D.14.3 Timers — D.14.1 Finalization — 7.6 Float_Text_IO — A.10.9 Float_Wide_Text_IO — A.11 Float_Wide_Wide_Text_IO — A.11 Integer_Text_IO — A.10.8 Integer_Wide_Text_IO — A.11 Integer_Wide_Wide_Text_IO — A.11 Interrupts — C.3.2 Names — C.3.2 IO_Exceptions — A.13 Iterator_Interfaces — 5.5.1 Locales — A.19 351 13 December 2012 Predefined Language Environment A Ada Reference Manual — 2012 Edition Standard (...continued) Ada (...continued) Numerics — A.5 Complex_Arrays — G.3.2 Complex_Elementary_Functions — G.1.2 Complex_Types — G.1.1 Discrete_Random — A.5.2 Elementary_Functions — A.5.1 Float_Random — A.5.2 Generic_Complex_Arrays — G.3.2 Generic_Complex_Elementary_Functions — G.1.2 Generic_Complex_Types — G.1.1 Generic_Elementary_Functions — A.5.1 Generic_Real_Arrays — G.3.1 Real_Arrays — G.3.1 Real_Time — D.8 Timing_Events — D.15 Sequential_IO — A.8.1 Storage_IO — A.9 Streams — 13.13.1 Stream_IO — A.12.1 Strings — A.4.1 Bounded — A.4.4 Equal_Case_Insensitive — A.4.10 Hash — A.4.9 Hash_Case_Insensitive — A.4.9 Less_Case_Insensitive — A.4.10 Fixed — A.4.3 Equal_Case_Insensitive — A.4.10 Hash — A.4.9 Hash_Case_Insensitive — A.4.9 Less_Case_Insensitive — A.4.10 Equal_Case_Insensitive — A.4.10 Hash — A.4.9 Hash_Case_Insensitive — A.4.9 Less_Case_Insensitive — A.4.10 Maps — A.4.2 Constants — A.4.6 Unbounded — A.4.5 Standard (...continued) Ada (...continued) Strings (...continued) Wide_Bounded — A.4.7 Wide_Equal_Case_Insensitive — A.4.7 Wide_Hash — A.4.7 Wide_Hash_Case_Insensitive — A.4.7 Wide_Equal_Case_Insensitive — A.4.7 Wide_Fixed — A.4.7 Wide_Equal_Case_Insensitive — A.4.7 Wide_Hash — A.4.7 Wide_Hash_Case_Insensitive — A.4.7 Wide_Hash — A.4.7 Wide_Hash_Case_Insensitive — A.4.7 Wide_Maps — A.4.7 Wide_Constants — A.4.7 Wide_Unbounded — A.4.7 Wide_Equal_Case_Insensitive — A.4.7 Wide_Hash — A.4.7 Wide_Hash_Case_Insensitive — A.4.7 Wide_Wide_Bounded — A.4.8 Wide_Wide_Equal_Case_Insensitive — A.4.8 Wide_Wide_Hash — A.4.8 Wide_Wide_Hash_Case_Insensitive — A.4.8 Wide_Wide_Equal_Case_Insensitive — A.4.8 Wide_Wide_Fixed — A.4.8 Wide_Wide_Equal_Case_Insensitive — A.4.8 Wide_Wide_Hash — A.4.8 Wide_Wide_Hash_Case_Insensitive — A.4.8 Wide_Wide_Hash — A.4.8 Wide_Wide_Hash_Case_Insensitive — A.4.8 Equal_Case_Insensitive — A.4.10 Wide_Wide_Maps — A.4.8 Hash — A.4.9 Hash_Case_Insensitive — A.4.9 Less_Case_Insensitive — A.4.10 UTF_Encoding — A.4.11 Conversions — A.4.11 Strings — A.4.11 Wide_Strings — A.4.11 Wide_Wide_Strings — A.4.11 Wide_Wide_Constants — A.4.8 Wide_Wide_Unbounded — A.4.8 Wide_Wide_Equal_Case_Insensitive — A.4.8 Wide_Wide_Hash — A.4.8 Wide_Wide_Hash_Case_Insensitive — A.4.8 Synchronous_Barriers — D.10.1 Synchronous_Task_Control — D.10 EDF — D.10 A Predefined Language Environment 13 December 2012 352 Ada Reference Manual — 2012 Edition Interfaces — B.2 C — B.3 Pointers — B.3.2 Strings — B.3.1 COBOL — B.4 Fortran — B.5 System — 13.7 Address_To_Access_Conversions — 13.7.2 Machine_Code — 13.8 Multiprocessors — D.16 Dispatching_Domains — D.16.1 RPC — E.5 Storage_Elements — 13.7.1 Storage_Pools — 13.11 Subpools — 13.11.4 Standard (...continued) Ada (...continued) Tags — 3.9 Generic_Dispatching_Constructor — 3.9 Task_Attributes — C.7.2 Task_Identification — C.7.1 Task_Termination — C.7.3 Text_IO — A.10.1 Bounded_IO — A.10.11 Complex_IO — G.1.3 Editing — F.3.3 Text_Streams — A.12.2 Unbounded_IO — A.10.12 Unchecked_Conversion — 13.9 Unchecked_Deallocate_Subpool — 13.11.5 Unchecked_Deallocation — 13.11.2 Wide_Characters — A.3.1 Handling — A.3.5 Wide_Text_IO — A.11 Complex_IO — G.1.4 Editing — F.3.4 Text_Streams — A.12.3 Wide_Bounded_IO — A.11 Wide_Unbounded_IO — A.11 Wide_Wide_Characters — A.3.1 Handling — A.3.6 Wide_Wide_Text_IO — A.11 Complex_IO — G.1.5 Editing — F.3.5 Text_Streams — A.12.4 Wide_Wide_Bounded_IO — A.11 Wide_Wide_Unbounded_IO — A.11 Implementation Requirements The implementation shall ensure that each language-defined subprogram is reentrant in the sense that concurrent calls on the same subprogram perform as specified, so long as all parameters that could be passed by reference denote nonoverlapping objects. If a descendant of a language-defined tagged type is declared, the implementation shall ensure that each inherited language-defined subprogram behaves as described in this International Standard. In particular, overriding a language-defined subprogram shall not alter the effect of any inherited language-defined subprogram. Implementation Permissions implementation may restrict The implementation may restrict children of language-defined library units (other than Standard). the replacement of language-defined compilation units. The 3/2 3.1/3 4 353 13 December 2012 Predefined Language Environment A Ada Reference Manual — 2012 Edition A.1 The Package Standard 1/3 This subclause outlines the specification of the package Standard containing all predefined identifiers in the language. The corresponding package body is not specified by the language. 2 3 4 5 6 7/1 8 9/1 10/1 11/2 12 13 14 15 16 17 18 The operators that are predefined for the types declared in the package Standard are given in comments since they are implicitly declared. Italics are used for pseudo-names of anonymous types (such as root_real) and for undefined information (such as implementation-defined). The library package Standard has the following declaration: Static Semantics package Standard is pragma Pure(Standard); type Boolean is (False, True); -- The predefined relational operators for this type are as follows: -- function "=" (Left, Right : Boolean'Base) return Boolean; -- function "/=" (Left, Right : Boolean'Base) return Boolean; -- function "<" (Left, Right : Boolean'Base) return Boolean; -- function "<=" (Left, Right : Boolean'Base) return Boolean; -- function ">" (Left, Right : Boolean'Base) return Boolean; -- function ">=" (Left, Right : Boolean'Base) return Boolean; -- The predefined logical operators and the predefined logical -- negation operator are as follows: -- function "and" (Left, Right : Boolean'Base) return Boolean'Base; -- function "or" (Left, Right : Boolean'Base) return Boolean'Base; -- function "xor" (Left, Right : Boolean'Base) return Boolean'Base; -- function "not" (Right : Boolean'Base) return Boolean'Base; -- The integer type root_integer and the -- corresponding universal type universal_integer are predefined. type Integer is range implementation-defined; subtype Natural is Integer range 0 .. Integer'Last; subtype Positive is Integer range 1 .. Integer'Last; -- The predefined operators for type Integer are as follows: -- function "=" (Left, Right : Integer'Base) return Boolean; -- function "/=" (Left, Right : Integer'Base) return Boolean; -- function "<" (Left, Right : Integer'Base) return Boolean; -- function "<=" (Left, Right : Integer'Base) return Boolean; -- function ">" (Left, Right : Integer'Base) return Boolean; -- function ">=" (Left, Right : Integer'Base) return Boolean; -- function "+" (Right : Integer'Base) return Integer'Base; -- function "-" (Right : Integer'Base) return Integer'Base; -- function "abs" (Right : Integer'Base) return Integer'Base; -- function "+" (Left, Right : Integer'Base) return Integer'Base; -- function "-" (Left, Right : Integer'Base) return Integer'Base; -- function "*" (Left, Right : Integer'Base) return Integer'Base; -- function "/" (Left, Right : Integer'Base) return Integer'Base; -- function "rem" (Left, Right : Integer'Base) return Integer'Base; -- function "mod" (Left, Right : Integer'Base) return Integer'Base; -- function "**" (Left : Integer'Base; Right : Natural) -- return Integer'Base; A.1 The Package Standard 13 December 2012 354 Ada Reference Manual — 2012 Edition -- The specification of each operator for the type -- root_integer, or for any additional predefined integer -- type, is obtained by replacing Integer by the name of the type -- in the specification of the corresponding operator of the type -- Integer. The right operand of the exponentiation operator -- remains as subtype Natural. -- The floating point type root_real and the -- corresponding universal type universal_real are predefined. type Float is digits implementation-defined; -- The predefined operators for this type are as follows: -- function "=" (Left, Right : Float) return Boolean; -- function "/=" (Left, Right : Float) return Boolean; -- function "<" (Left, Right : Float) return Boolean; -- function "<=" (Left, Right : Float) return Boolean; -- function ">" (Left, Right : Float) return Boolean; -- function ">=" (Left, Right : Float) return Boolean; -- function "+" (Right : Float) return Float; -- function "-" (Right : Float) return Float; -- function "abs" (Right : Float) return Float; -- function "+" (Left, Right : Float) return Float; -- function "-" (Left, Right : Float) return Float; -- function "*" (Left, Right : Float) return Float; -- function "/" (Left, Right : Float) return Float; -- function "**" (Left : Float; Right : Integer'Base) return Float; -- The specification of each operator for the type root_real, or for -- any additional predefined floating point type, is obtained by -- replacing Float by the name of the type in the specification of the -- corresponding operator of the type Float. -- In addition, the following operators are predefined for the root -- numeric types: function "*" (Left : root_integer; Right : root_real) return root_real; function "*" (Left : root_real; Right : root_integer) return root_real; function "/" (Left : root_real; Right : root_integer) return root_real; -- The type universal_fixed is predefined. -- The only multiplying operators defined between -- fixed point types are function "*" (Left : universal_fixed; Right : universal_fixed) return universal_fixed; function "/" (Left : universal_fixed; Right : universal_fixed) return universal_fixed; -- The type universal_access is predefined. -- The following equality operators are predefined: function "=" (Left, Right: universal_access) return Boolean; function "/=" (Left, Right: universal_access) return Boolean; 19 20/2 21 22 23 24 25 26 27 28 29 30 31 32 33 34 34.1/2 34.2/2 355 13 December 2012 The Package Standard A.1 Ada Reference Manual — 2012 Edition 35/3 -- The declaration of type Character is based on the standard ISO 8859-1 character set. -- There are no character literals corresponding to the positions for control characters. -- They are indicated in italics in this definition. See 3.5.2. type Character is (nul, soh, stx, etx, vt, ht, bs, lf, dle, dc1, dc2, dc3, can, em, sub, esc, eot, enq, ack, bel, --0 (16#00#) .. 7 (16#07#) ff, si, --8 (16#08#) .. 15 (16#0F#) so, cr, dc4, nak, syn, etb, --16 (16#10#) .. 23 (16#17#) us, --24 (16#18#) .. 31 (16#1F#) fs, gs, rs, ' ', '!', '"', '#', '(', ')', '*', '+', '$', '%', '&', ''', --32 (16#20#) .. 39 (16#27#) ',', '-', '.', '/', --40 (16#28#) .. 47 (16#2F#) '0', '1', '2', '3', '8', '9', ':', ';', '4', '5', '6', '7', --48 (16#30#) .. 55 (16#37#) '<', '=', '>', '?', --56 (16#38#) .. 63 (16#3F#) '@', 'A', 'B', 'C', 'H', 'I', 'J', 'K', 'D', 'E', 'F', 'G', --64 (16#40#) .. 71 (16#47#) 'L', 'M', 'N', 'O', --72 (16#48#) .. 79 (16#4F#) 'P', 'Q', 'R', 'S', 'X', 'Y', 'Z', '[', 'T', 'U', 'V', 'W', --80 (16#50#) .. 87 (16#57#) '\', ']', '^', '_', --88 (16#58#) .. 95 (16#5F#) '`', 'a', 'b', 'c', 'h', 'i', 'j', 'k', 'd', 'e', 'f', 'g', --96 (16#60#) .. 103 (16#67#) 'l', 'm', 'n', 'o', --104 (16#68#) .. 111 (16#6F#) 'p', 'q', 'r', 's', 'x', 'y', 'z', '{', 't', 'u', 'v', 'w', --112 (16#70#) .. 119 (16#77#) '|', '}', '~', del, --120 (16#78#) .. 127 (16#7F#) reserved_128, reserved_129, reserved_132, nel, ssa, vts, pld, hts, htj, bph, nbh, esa, plu, ri, --128 (16#80#) .. 131 (16#83#) --132 (16#84#) .. 135 (16#87#) ss2, ss3, --136 (16#88#) .. 143 (16#8F#) dcs, pu1, pu2, sts, sos, reserved_153, sci, osc, pm, apc, st, cch, mw, spa, epa, --144 (16#90#) .. 151 (16#97#) --152 (16#98#) .. 155 (16#9B#) csi, --156 (16#9C#) .. 159 (16#9F#) ' ', '¡', '¢', '£', '¨', '©', 'ª', '«', ¬', soft_hyphen, '®', '¤', '¥', '¦', '§', --160 (16#A0#) .. 167 (16#A7#) --168 (16#A8#) .. 171 (16#AB#) --172 (16#AC#) .. 175 (16#AF#) '¯', '°', '±', '²', '³', '¸', '¹', 'º', '»', '´', 'µ', '¶', '·', --176 (16#B0#) .. 183 (16#B7#) '¼', '½', '¾', '¿', --184 (16#B8#) .. 191 (16#BF#) 'À', 'Á', 'Â', 'Ã', 'È', 'É', 'Ê', 'Ë', 'Ä', 'Å', 'Æ', 'Ç', --192 (16#C0#) .. 199 (16#C7#) 'Ì', 'Í', 'Î', 'Ï', --200 (16#C8#) .. 207 (16#CF#) 'Ð', 'Ñ', 'Ò', 'Ó', 'Ø', 'Ù', 'Ú', 'Û', 'Ô', 'Õ', 'Ö', '×', --208 (16#D0#) .. 215 (16#D7#) 'Ü', 'Ý', 'Þ', 'ß', --216 (16#D8#) .. 223 (16#DF#) 'à', 'á', 'â', 'ã', 'è', 'é', 'ê', 'ë', 'ä', 'å', 'æ', 'ç', --224 (16#E0#) .. 231 (16#E7#) 'ì', 'í', 'î', 'ï', --232 (16#E8#) .. 239 (16#EF#) 'ð', 'ñ', 'ò', 'ó', 'ø', 'ù', 'ú', 'û', -- The predefined operators for the type Character are the same as for -- any enumeration type. 'ô', 'õ', 'ö', '÷', --240 (16#F0#) .. 247 (16#F7#) 'ü', 'ý', 'þ', 'ÿ');--248 (16#F8#) .. 255 (16#FF#) -- The declaration of type Wide_Character is based on the standard ISO/IEC 10646:2011 BMP character -- set. The first 256 positions have the same contents as type Character. See 3.5.2. type Wide_Character is (nul, soh ... Hex_0000FFFE, Hex_0000FFFF); 36 36.1/3 A.1 The Package Standard 13 December 2012 356 Ada Reference Manual — 2012 Edition -- The declaration of type Wide_Wide_Character is based on the full -- ISO/IEC 10646:2011 character set. The first 65536 positions have the -- same contents as type Wide_Character. See 3.5.2. type Wide_Wide_Character is (nul, soh ... Hex_7FFFFFFE, Hex_7FFFFFFF); for Wide_Wide_Character'Size use 32; package ASCII is ... end ASCII; --Obsolescent; see J.5 -- Predefined string types: type String is array(Positive range <>) of Character with Pack; -- The predefined operators for this type are as follows: -- function "=" (Left, Right: String) return Boolean; -- function "/=" (Left, Right: String) return Boolean; -- function "<" (Left, Right: String) return Boolean; -- function "<=" (Left, Right: String) return Boolean; -- function ">" (Left, Right: String) return Boolean; -- function ">=" (Left, Right: String) return Boolean; -- function "&" (Left: String; Right: String) return String; -- function "&" (Left: Character; Right: String) return String; -- function "&" (Left: String; Right: Character) return String; -- function "&" (Left: Character; Right: Character) return String; type Wide_String is array(Positive range <>) of Wide_Character with Pack; -- The predefined operators for this type correspond to those for String. type Wide_Wide_String is array (Positive range <>) of Wide_Wide_Character with Pack; -- The predefined operators for this type correspond to those for String. type Duration is delta implementation-defined range implementation-defined; -- The predefined operators for the type Duration are the same as for -- any fixed point type. -- The predefined exceptions: Constraint_Error: exception; Program_Error : exception; Storage_Error : exception; Tasking_Error : exception; end Standard; Standard has no private part. In each of the types Character, Wide_Character, and Wide_Wide_Character, the character literals for the space character (position 32) and the non-breaking space character (position 160) correspond to different values. Unless indicated otherwise, each occurrence of the character literal ' ' in this International Standard refers to the space character. Similarly, the character literals for hyphen (position 45) and soft hyphen (position 173) correspond to different values. Unless indicated otherwise, each occurrence of the character literal '–' in this International Standard refers to the hyphen character. Elaboration of the body of Standard has no effect. Dynamic Semantics An implementation may provide additional predefined integer types and additional predefined floating point types. Not all of these types need have names. Implementation Permissions 357 13 December 2012 The Package Standard A.1 36.2/3 36.3/2 37/3 38 39 40 41/3 42 42.1/3 42.2/2 43 44 45 46 47 48 49/2 50 51 Ada Reference Manual — 2012 Edition If an implementation provides additional named predefined integer types, then the names should end with “Integer” as in “Long_Integer”. If an implementation provides additional named predefined floating point types, then the names should end with “Float” as in “Long_Float”. Implementation Advice NOTES 1 Certain aspects of the predefined entities cannot be completely described in the language itself. For example, although the enumeration type Boolean can be written showing the two enumeration literals False and True, the short-circuit control forms cannot be expressed in the language. 2 As explained in 8.1, “Declarative Region” and 10.1.4, “The Compilation Process”, the declarative region of the package Standard encloses every library unit and consequently the main subprogram; the declaration of every library unit is assumed to occur within this declarative region. Library_items are assumed to be ordered in such a way that there are no forward semantic dependences. However, as explained in 8.3, “Visibility”, the only library units that are visible within a given compilation unit are the library units named by all with_clauses that apply to the given unit, and moreover, within the declarative region of a given library unit, that library unit itself. 3 If all block_statements of a program are named, then the name of each program unit can always be written as an expanded name starting with Standard (unless Standard is itself hidden). The name of a library unit cannot be a homograph of a name (such as Integer) that is already declared in Standard. 4 The exception Standard.Numeric_Error is defined in J.6. A.2 The Package Ada The following language-defined library package exists: Static Semantics package Ada is pragma Pure(Ada); end Ada; Ada serves as the parent of most of the other language-defined library units; its declaration is empty (except for the pragma Pure). 52 53 54 55 56 1 2 3 4 In the standard mode, it is illegal to compile a child of package Ada. Legality Rules A.3 Character Handling 1/3 and This subclause presents the packages related to character processing: an empty declared pure package Characters and Characters.Latin_1. The package Characters.Handling provides classification and conversion functions for Character data, and some simple functions for dealing with Wide_Character and Wide_Wide_Character data. The child package Characters.Latin_1 declares a set of constants initialized to values of type Character. child packages Characters.Handling A.1 The Package Standard 13 December 2012 358 Ada Reference Manual — 2012 Edition A.3.1 The Packages Characters, Wide_Characters, and Wide_Wide_Characters The library package Characters has the following declaration: Static Semantics package Ada.Characters is pragma Pure(Characters); end Ada.Characters; The library package Wide_Characters has the following declaration: package Ada.Wide_Characters is pragma Pure(Wide_Characters); end Ada.Wide_Characters; The library package Wide_Wide_Characters has the following declaration: package Ada.Wide_Wide_Characters is pragma Pure(Wide_Wide_Characters); end Ada.Wide_Wide_Characters; Implementation Advice If an implementation chooses to provide implementation-defined operations on Wide_Character or Wide_String (such as collating and sorting, etc.) it should do so by providing child units of implementation-defined operations on it chooses Wide_Characters. Similarly to provide Wide_Wide_Character or Wide_Wide_String it should do so by providing child units of Wide_Wide_Characters. if A.3.2 The Package Characters.Handling The library package Characters.Handling has the following declaration: Static Semantics with Ada.Characters.Conversions; package Ada.Characters.Handling is pragma Pure(Handling); --Character classification functions function Is_Control (Item : in Character) return Boolean; function Is_Graphic (Item : in Character) return Boolean; function Is_Letter (Item : in Character) return Boolean; function Is_Lower (Item : in Character) return Boolean; function Is_Upper (Item : in Character) return Boolean; function Is_Basic (Item : in Character) return Boolean; function Is_Digit (Item : in Character) return Boolean; function Is_Decimal_Digit (Item : in Character) return Boolean renames Is_Digit; function Is_Hexadecimal_Digit (Item : in Character) return Boolean; function Is_Alphanumeric (Item : in Character) return Boolean; function Is_Special (Item : in Character) return Boolean; function Is_Line_Terminator (Item : in Character) return Boolean; function Is_Mark (Item : in Character) return Boolean; function Is_Other_Format (Item : in Character) return Boolean; function Is_Punctuation_Connector (Item : in Character) return Boolean; function Is_Space (Item : in Character) return Boolean; 1 2 3/2 4/2 5/2 6/2 7/3 1 2/2 3 4/3 359 13 December 2012 The Packages Characters, Wide_Characters, and Wide_Wide_Characters A.3.1 Ada Reference Manual — 2012 Edition --Conversion functions for Character and String function To_Lower (Item : in Character) return Character; function To_Upper (Item : in Character) return Character; function To_Basic (Item : in Character) return Character; function To_Lower (Item : in String) return String; function To_Upper (Item : in String) return String; function To_Basic (Item : in String) return String; --Classifications of and conversions between Character and ISO 646 subtype ISO_646 is Character range Character'Val(0) .. Character'Val(127); function Is_ISO_646 (Item : in Character) return Boolean; function Is_ISO_646 (Item : in String) return Boolean; function To_ISO_646 (Item : in Character; Substitute : in ISO_646 := ' ') return ISO_646; function To_ISO_646 (Item : in String; Substitute : in ISO_646 := ' ') return String; -- The functions Is_Character, Is_String, To_Character, To_String, To_Wide_Character, -- and To_Wide_String are obsolescent; see J.14. Paragraphs 14 through 18 were deleted. end Ada.Characters.Handling; In the description below for each function that returns a Boolean result, the effect is described in terms of the conditions under which the value True is returned. If these conditions are not met, then the function returns False. Each of the following classification functions has a formal Character parameter, Item, and returns a Boolean result. 5 6 7 8 9 10 11 12 13/2 19 20 21 22 Is_Control True if Item is a control character. A control character is a character whose position is in one of the ranges 0..31 or 127..159. 23 Is_Graphic True if Item is a graphic character. A graphic character is a character whose position is in one of the ranges 32..126 or 160..255. 24 Is_Letter True if Item is a letter. A letter is a character that is in one of the ranges 'A'..'Z' or 'a'..'z', or whose position is in one of the ranges 192..214, 216..246, or 248..255. 25 Is_Lower True if Item is a lower-case letter. A lower-case letter is a character that is in the range 'a'..'z', or whose position is in one of the ranges 223..246 or 248..255. 26 Is_Upper 27 Is_Basic True if Item is an upper-case letter. An upper-case letter is a character that is in the range 'A'..'Z' or whose position is in one of the ranges 192..214 or 216.. 222. True if Item is a basic letter. A basic letter is a character that is in one of the ranges 'A'..'Z' and 'a'..'z', or that is one of the following: 'Æ', 'æ', 'Ð', 'ð', 'Þ', 'þ', or 'ß'. 28 29 Is_Digit True if Item is a decimal digit. A decimal digit is a character in the range '0'..'9'. Is_Decimal_Digit A renaming of Is_Digit. 30 Is_Hexadecimal_Digit True if Item is a hexadecimal digit. A hexadecimal digit is a character that is either a decimal digit or that is in one of the ranges 'A' .. 'F' or 'a' .. 'f'. A.3.2 The Package Characters.Handling 13 December 2012 360 Ada Reference Manual — 2012 Edition Is_Alphanumeric True if Item is an alphanumeric character. An alphanumeric character is a character that is either a letter or a decimal digit. Is_Special True if Item is a special graphic character. A special graphic character is a graphic character that is not alphanumeric. Is_Line_Terminator True if Item is a character with position 10 .. 13 (Line_Feed, Line_Tabulation, Form_Feed, Carriage_Return) or 133 (Next_Line). Is_Mark Never True (no value of type Character has categories Mark, Non-Spacing or Mark, Spacing Combining). Is_Other_Format True if Item is a character with position 173 (Soft_Hyphen). Is_Punctuation_Connector True if Item is a character with position 95 ('_', known as Low_Line or Underscore). Is_Space True if Item is a character with position 32 (' ') or 160 (No_Break_Space). Each of the names To_Lower, To_Upper, and To_Basic refers to two functions: one that converts from Character to Character, and the other that converts from String to String. The result of each Character-to- Character function is described below, in terms of the conversion applied to Item, its formal Character parameter. The result of each String-to-String conversion is obtained by applying to each element of the function's String parameter the corresponding Character-to-Character conversion; the result is the null String if the value of the formal parameter is the null String. The lower bound of the result String is 1. To_Lower To_Upper Returns the corresponding lower-case value for Item if Is_Upper(Item), and returns Item otherwise. Returns the corresponding upper-case value for Item if Is_Lower(Item) and Item has an upper-case form, and returns Item otherwise. The lower case letters 'ß' and 'ÿ' do not have upper case forms. To_Basic Returns the letter corresponding to Item but with no diacritical mark, if Item is a letter but not a basic letter; returns Item otherwise. The following set of functions test for membership in the ISO 646 character range, or convert between ISO 646 and Character. 31 32 32.1/3 32.2/3 32.3/3 32.4/3 32.5/3 33 34 35 36 37 Is_ISO_646 The function whose formal parameter, Item, is of type Character returns True if Item is in 38 the subtype ISO_646. Is_ISO_646 The function whose formal parameter, Item, is of type String returns True if 39 Is_ISO_646(Item(I)) is True for each I in Item'Range. To_ISO_646 To_ISO_646 The function whose first formal parameter, Item, is of type Character returns Item if Is_ISO_646(Item), and returns the Substitute ISO_646 character otherwise. The function whose first formal parameter, Item, is of type String returns the String whose Range is 1..Item'Length and each of whose elements is given by To_ISO_646 of the corresponding element in Item. Paragraphs 42 through 49 were deleted. NOTES 5 A basic letter is a letter without a diacritical mark. 40 41 50 361 13 December 2012 The Package Characters.Handling A.3.2 Ada Reference Manual — 2012 Edition 6 Except for the hexadecimal digits, basic letters, and ISO_646 characters, the categories identified in the classification functions form a strict hierarchy: — Control characters — Graphic characters — Alphanumeric characters — Letters — Upper-case letters — Lower-case letters — Decimal digits — Special graphic characters 51 52 53 54 55 56 57 58 59 60/3 7 There are certain characters which are defined to be lower case letters by ISO 10646 and are therefore allowed in identifiers, but are not considered lower case letters by Ada.Characters.Handling. 1 2 3 4 5 6 A.3.3 The Package Characters.Latin_1 The package Characters.Latin_1 declares constants for characters in ISO 8859-1. The library package Characters.Latin_1 has the following declaration: Static Semantics package Ada.Characters.Latin_1 is pragma Pure(Latin_1); -- Control characters: NUL : constant Character := Character'Val(0); SOH : constant Character := Character'Val(1); STX : constant Character := Character'Val(2); ETX : constant Character := Character'Val(3); EOT : constant Character := Character'Val(4); ENQ : constant Character := Character'Val(5); ACK : constant Character := Character'Val(6); BEL : constant Character := Character'Val(7); BS : constant Character := Character'Val(8); HT : constant Character := Character'Val(9); LF : constant Character := Character'Val(10); VT : constant Character := Character'Val(11); FF : constant Character := Character'Val(12); CR : constant Character := Character'Val(13); SO : constant Character := Character'Val(14); SI : constant Character := Character'Val(15); DLE : constant Character := Character'Val(16); DC1 : constant Character := Character'Val(17); DC2 : constant Character := Character'Val(18); DC3 : constant Character := Character'Val(19); DC4 : constant Character := Character'Val(20); NAK : constant Character := Character'Val(21); SYN : constant Character := Character'Val(22); ETB : constant Character := Character'Val(23); CAN : constant Character := Character'Val(24); EM : constant Character := Character'Val(25); SUB : constant Character := Character'Val(26); ESC : constant Character := Character'Val(27); FS : constant Character := Character'Val(28); GS : constant Character := Character'Val(29); RS : constant Character := Character'Val(30); US : constant Character := Character'Val(31); A.3.2 The Package Characters.Handling 13 December 2012 362 Ada Reference Manual — 2012 Edition -- ISO 646 graphic characters: Space : constant Character := ' '; -- Character'Val(32) Exclamation : constant Character := '!'; -- Character'Val(33) Quotation : constant Character := '"'; -- Character'Val(34) Number_Sign : constant Character := '#'; -- Character'Val(35) Dollar_Sign : constant Character := '$'; -- Character'Val(36) Percent_Sign : constant Character := '%'; -- Character'Val(37) Ampersand : constant Character := '&'; -- Character'Val(38) Apostrophe : constant Character := '''; -- Character'Val(39) Left_Parenthesis : constant Character := '('; -- Character'Val(40) Right_Parenthesis : constant Character := ')'; -- Character'Val(41) Asterisk : constant Character := '*'; -- Character'Val(42) Plus_Sign : constant Character := '+'; -- Character'Val(43) Comma : constant Character := ','; -- Character'Val(44) Hyphen : constant Character := '-'; -- Character'Val(45) Minus_Sign : Character renames Hyphen; Full_Stop : constant Character := '.'; -- Character'Val(46) Solidus : constant Character := '/'; -- Character'Val(47) -- Decimal digits '0' though '9' are at positions 48 through 57 Colon : constant Character := ':'; -- Character'Val(58) Semicolon : constant Character := ';'; -- Character'Val(59) Less_Than_Sign : constant Character := '<'; -- Character'Val(60) Equals_Sign : constant Character := '='; -- Character'Val(61) Greater_Than_Sign : constant Character := '>'; -- Character'Val(62) Question : constant Character := '?'; -- Character'Val(63) Commercial_At : constant Character := '@'; -- Character'Val(64) -- Letters 'A' through 'Z' are at positions 65 through 90 Left_Square_Bracket : constant Character := '['; -- Character'Val(91) Reverse_Solidus : constant Character := '\'; -- Character'Val(92) Right_Square_Bracket : constant Character := ']'; -- Character'Val(93) Circumflex : constant Character := '^'; -- Character'Val(94) Low_Line : constant Character := '_'; -- Character'Val(95) Grave : constant Character := '`'; -- Character'Val(96) LC_A : constant Character := 'a'; -- Character'Val(97) LC_B : constant Character := 'b'; -- Character'Val(98) LC_C : constant Character := 'c'; -- Character'Val(99) LC_D : constant Character := 'd'; -- Character'Val(100) LC_E : constant Character := 'e'; -- Character'Val(101) LC_F : constant Character := 'f'; -- Character'Val(102) LC_G : constant Character := 'g'; -- Character'Val(103) LC_H : constant Character := 'h'; -- Character'Val(104) LC_I : constant Character := 'i'; -- Character'Val(105) LC_J : constant Character := 'j'; -- Character'Val(106) LC_K : constant Character := 'k'; -- Character'Val(107) LC_L : constant Character := 'l'; -- Character'Val(108) LC_M : constant Character := 'm'; -- Character'Val(109) LC_N : constant Character := 'n'; -- Character'Val(110) LC_O : constant Character := 'o'; -- Character'Val(111) LC_P : constant Character := 'p'; -- Character'Val(112) LC_Q : constant Character := 'q'; -- Character'Val(113) LC_R : constant Character := 'r'; -- Character'Val(114) LC_S : constant Character := 's'; -- Character'Val(115) LC_T : constant Character := 't'; -- Character'Val(116) LC_U : constant Character := 'u'; -- Character'Val(117) LC_V : constant Character := 'v'; -- Character'Val(118) LC_W : constant Character := 'w'; -- Character'Val(119) LC_X : constant Character := 'x'; -- Character'Val(120) LC_Y : constant Character := 'y'; -- Character'Val(121) LC_Z : constant Character := 'z'; -- Character'Val(122) Left_Curly_Bracket : constant Character := '{'; -- Character'Val(123) Vertical_Line : constant Character := '|'; -- Character'Val(124) Right_Curly_Bracket : constant Character := '}'; -- Character'Val(125) Tilde : constant Character := '~'; -- Character'Val(126) DEL : constant Character := Character'Val(127); 7 8 9 10 11 12 13 14 363 13 December 2012 The Package Characters.Latin_1 A.3.3 Ada Reference Manual — 2012 Edition 15 16 17 18 19 20 21/3 -- ISO 6429 control characters: IS4 : Character renames FS; IS3 : Character renames GS; IS2 : Character renames RS; IS1 : Character renames US; Reserved_128 : constant Character := Character'Val(128); Reserved_129 : constant Character := Character'Val(129); BPH : constant Character := Character'Val(130); NBH : constant Character := Character'Val(131); Reserved_132 : constant Character := Character'Val(132); NEL : constant Character := Character'Val(133); SSA : constant Character := Character'Val(134); ESA : constant Character := Character'Val(135); HTS : constant Character := Character'Val(136); HTJ : constant Character := Character'Val(137); VTS : constant Character := Character'Val(138); PLD : constant Character := Character'Val(139); PLU : constant Character := Character'Val(140); RI : constant Character := Character'Val(141); SS2 : constant Character := Character'Val(142); SS3 : constant Character := Character'Val(143); DCS : constant Character := Character'Val(144); PU1 : constant Character := Character'Val(145); PU2 : constant Character := Character'Val(146); STS : constant Character := Character'Val(147); CCH : constant Character := Character'Val(148); MW : constant Character := Character'Val(149); SPA : constant Character := Character'Val(150); EPA : constant Character := Character'Val(151); SOS : constant Character := Character'Val(152); Reserved_153 : constant Character := Character'Val(153); SCI : constant Character := Character'Val(154); CSI : constant Character := Character'Val(155); ST : constant Character := Character'Val(156); OSC : constant Character := Character'Val(157); PM : constant Character := Character'Val(158); APC : constant Character := Character'Val(159); -- Other graphic characters: -- Character positions 160 (16#A0#) .. 175 (16#AF#): No_Break_Space : constant Character := ' '; --Character'Val(160) NBSP : Character renames No_Break_Space; Inverted_Exclamation : constant Character := '¡'; --Character'Val(161) Cent_Sign : constant Character := '¢'; --Character'Val(162) Pound_Sign : constant Character := '£'; --Character'Val(163) Currency_Sign : constant Character := '¤'; --Character'Val(164) Yen_Sign : constant Character := '¥'; --Character'Val(165) Broken_Bar : constant Character := '¦'; --Character'Val(166) Section_Sign : constant Character := '§'; --Character'Val(167) Diaeresis : constant Character := '¨'; --Character'Val(168) Copyright_Sign : constant Character := '©'; --Character'Val(169) Feminine_Ordinal_Indicator : constant Character := 'ª'; --Character'Val(170) Left_Angle_Quotation : constant Character := '«'; --Character'Val(171) Not_Sign : constant Character := '¬'; --Character'Val(172) Soft_Hyphen : constant Character := Character'Val(173); Registered_Trade_Mark_Sign : constant Character := '®'; --Character'Val(174) Macron : constant Character := '¯'; --Character'Val(175) A.3.3 The Package Characters.Latin_1 13 December 2012 364 Ada Reference Manual — 2012 Edition -- Character positions 176 (16#B0#) .. 191 (16#BF#): Degree_Sign : constant Character := '°'; --Character'Val(176) Ring_Above : Character renames Degree_Sign; Plus_Minus_Sign : constant Character := '±'; --Character'Val(177) Superscript_Two : constant Character := '²'; --Character'Val(178) Superscript_Three : constant Character := '³'; --Character'Val(179) Acute : constant Character := '´'; --Character'Val(180) Micro_Sign : constant Character := 'µ'; --Character'Val(181) Pilcrow_Sign : constant Character := '¶'; --Character'Val(182) Paragraph_Sign : Character renames Pilcrow_Sign; Middle_Dot : constant Character := '·'; --Character'Val(183) Cedilla : constant Character := '¸'; --Character'Val(184) Superscript_One : constant Character := '¹'; --Character'Val(185) Masculine_Ordinal_Indicator: constant Character := 'º'; --Character'Val(186) Right_Angle_Quotation : constant Character := '»'; --Character'Val(187) Fraction_One_Quarter : constant Character := '¼'; --Character'Val(188) Fraction_One_Half : constant Character := '½'; --Character'Val(189) Fraction_Three_Quarters : constant Character := '¾'; --Character'Val(190) Inverted_Question : constant Character := '¿'; --Character'Val(191) -- Character positions 192 (16#C0#) .. 207 (16#CF#): UC_A_Grave : constant Character := 'À'; --Character'Val(192) UC_A_Acute : constant Character := 'Á'; --Character'Val(193) UC_A_Circumflex : constant Character := 'Â'; --Character'Val(194) UC_A_Tilde : constant Character := 'Ã'; --Character'Val(195) UC_A_Diaeresis : constant Character := 'Ä'; --Character'Val(196) UC_A_Ring : constant Character := 'Å'; --Character'Val(197) UC_AE_Diphthong : constant Character := 'Æ'; --Character'Val(198) UC_C_Cedilla : constant Character := 'Ç'; --Character'Val(199) UC_E_Grave : constant Character := 'È'; --Character'Val(200) UC_E_Acute : constant Character := 'É'; --Character'Val(201) UC_E_Circumflex : constant Character := 'Ê'; --Character'Val(202) UC_E_Diaeresis : constant Character := 'Ë'; --Character'Val(203) UC_I_Grave : constant Character := 'Ì'; --Character'Val(204) UC_I_Acute : constant Character := 'Í'; --Character'Val(205) UC_I_Circumflex : constant Character := 'Î'; --Character'Val(206) UC_I_Diaeresis : constant Character := 'Ï'; --Character'Val(207) -- Character positions 208 (16#D0#) .. 223 (16#DF#): UC_Icelandic_Eth : constant Character := 'Ð'; --Character'Val(208) UC_N_Tilde : constant Character := 'Ñ'; --Character'Val(209) UC_O_Grave : constant Character := 'Ò'; --Character'Val(210) UC_O_Acute : constant Character := 'Ó'; --Character'Val(211) UC_O_Circumflex : constant Character := 'Ô'; --Character'Val(212) UC_O_Tilde : constant Character := 'Õ'; --Character'Val(213) UC_O_Diaeresis : constant Character := 'Ö'; --Character'Val(214) Multiplication_Sign : constant Character := '×'; --Character'Val(215) UC_O_Oblique_Stroke : constant Character := 'Ø'; --Character'Val(216) UC_U_Grave : constant Character := 'Ù'; --Character'Val(217) UC_U_Acute : constant Character := 'Ú'; --Character'Val(218) UC_U_Circumflex : constant Character := 'Û'; --Character'Val(219) UC_U_Diaeresis : constant Character := 'Ü'; --Character'Val(220) UC_Y_Acute : constant Character := 'Ý'; --Character'Val(221) UC_Icelandic_Thorn : constant Character := 'Þ'; --Character'Val(222) LC_German_Sharp_S : constant Character := 'ß'; --Character'Val(223) 22 23 24 365 13 December 2012 The Package Characters.Latin_1 A.3.3 Ada Reference Manual — 2012 Edition 25 26 -- Character positions 224 (16#E0#) .. 239 (16#EF#): LC_A_Grave : constant Character := 'à'; --Character'Val(224) LC_A_Acute : constant Character := 'á'; --Character'Val(225) LC_A_Circumflex : constant Character := 'â'; --Character'Val(226) LC_A_Tilde : constant Character := 'ã'; --Character'Val(227) LC_A_Diaeresis : constant Character := 'ä'; --Character'Val(228) LC_A_Ring : constant Character := 'å'; --Character'Val(229) LC_AE_Diphthong : constant Character := 'æ'; --Character'Val(230) LC_C_Cedilla : constant Character := 'ç'; --Character'Val(231) LC_E_Grave : constant Character := 'è'; --Character'Val(232) LC_E_Acute : constant Character := 'é'; --Character'Val(233) LC_E_Circumflex : constant Character := 'ê'; --Character'Val(234) LC_E_Diaeresis : constant Character := 'ë'; --Character'Val(235) LC_I_Grave : constant Character := 'ì'; --Character'Val(236) LC_I_Acute : constant Character := 'í'; --Character'Val(237) LC_I_Circumflex : constant Character := 'î'; --Character'Val(238) LC_I_Diaeresis : constant Character := 'ï'; --Character'Val(239) -- Character positions 240 (16#F0#) .. 255 (16#FF#): LC_Icelandic_Eth : constant Character := 'ð'; --Character'Val(240) LC_N_Tilde : constant Character := 'ñ'; --Character'Val(241) LC_O_Grave : constant Character := 'ò'; --Character'Val(242) LC_O_Acute : constant Character := 'ó'; --Character'Val(243) LC_O_Circumflex : constant Character := 'ô'; --Character'Val(244) LC_O_Tilde : constant Character := 'õ'; --Character'Val(245) LC_O_Diaeresis : constant Character := 'ö'; --Character'Val(246) Division_Sign : constant Character := '÷'; --Character'Val(247) LC_O_Oblique_Stroke : constant Character := 'ø'; --Character'Val(248) LC_U_Grave : constant Character := 'ù'; --Character'Val(249) LC_U_Acute : constant Character := 'ú'; --Character'Val(250) LC_U_Circumflex : constant Character := 'û'; --Character'Val(251) LC_U_Diaeresis : constant Character := 'ü'; --Character'Val(252) LC_Y_Acute : constant Character := 'ý'; --Character'Val(253) LC_Icelandic_Thorn : constant Character := 'þ'; --Character'Val(254) LC_Y_Diaeresis : constant Character := 'ÿ'; --Character'Val(255) end Ada.Characters.Latin_1; 27 An implementation may provide additional packages as children of Ada.Characters, to declare names for the symbols of the local character set or other character sets. Implementation Permissions A.3.3 The Package Characters.Latin_1 13 December 2012 366 Ada Reference Manual — 2012 Edition A.3.4 The Package Characters.Conversions The library package Characters.Conversions has the following declaration: Static Semantics package Ada.Characters.Conversions is pragma Pure(Conversions); function Is_Character (Item : in Wide_Character) return Boolean; function Is_String (Item : in Wide_String) return Boolean; function Is_Character (Item : in Wide_Wide_Character) return Boolean; function Is_String (Item : in Wide_Wide_String) return Boolean; function Is_Wide_Character (Item : in Wide_Wide_Character) return Boolean; function Is_Wide_String (Item : in Wide_Wide_String) return Boolean; function To_Wide_Character (Item : in Character) return Wide_Character; function To_Wide_String (Item : in String) return Wide_String; function To_Wide_Wide_Character (Item : in Character) return Wide_Wide_Character; function To_Wide_Wide_String (Item : in String) return Wide_Wide_String; function To_Wide_Wide_Character (Item : in Wide_Character) return Wide_Wide_Character; function To_Wide_Wide_String (Item : in Wide_String) return Wide_Wide_String; function To_Character (Item : in Wide_Character; Substitute : in Character := ' ') return Character; function To_String (Item : in Wide_String; Substitute : in Character := ' ') return String; function To_Character (Item : in Wide_Wide_Character; Substitute : in Character := ' ') return Character; function To_String (Item : in Wide_Wide_String; Substitute : in Character := ' ') return String; function To_Wide_Character (Item : in Wide_Wide_Character; Substitute : in Wide_Character := ' ') return Wide_Character; function To_Wide_String (Item : in Wide_Wide_String; Substitute : in Wide_Character := ' ') return Wide_String; end Ada.Characters.Conversions; The functions in package Characters.Conversions test Wide_Wide_Character or Wide_Character values for membership in Wide_Character or Character, or convert between corresponding characters of Wide_Wide_Character, Wide_Character, and Character. function Is_Character (Item : in Wide_Character) return Boolean; Returns True if Wide_Character'Pos(Item) <= Character'Pos(Character'Last). function Is_Character (Item : in Wide_Wide_Character) return Boolean; Returns True if Wide_Wide_Character'Pos(Item) <= Character'Pos(Character'Last). function Is_Wide_Character (Item : in Wide_Wide_Character) return Boolean; Returns True if Wide_Wide_Character'Pos(Item) <= Wide_Character'Pos(Wide_Character'Last). 1/2 2/2 3/2 4/2 5/2 6/2 7/2 8/2 9/2 10/2 11/2 12/2 13/2 367 13 December 2012 The Package Characters.Conversions A.3.4 Ada Reference Manual — 2012 Edition 14/2 15/2 16/2 17/2 18/2 19/2 20/2 21/2 22/2 23/2 24/2 25/2 26/2 27/2 28/2 29/2 30/2 31/2 32/2 33/2 function Is_String (Item : in Wide_String) return Boolean; function Is_String (Item : in Wide_Wide_String) return Boolean; Returns True if Is_Character(Item(I)) is True for each I in Item'Range. function Is_Wide_String (Item : in Wide_Wide_String) return Boolean; Returns True if Is_Wide_Character(Item(I)) is True for each I in Item'Range. function To_Character (Item : in Wide_Character; Substitute : in Character := ' ') return Character; function To_Character (Item : in Wide_Wide_Character; Substitute : in Character := ' ') return Character; Returns the Character corresponding to Item if Is_Character(Item), and returns the Substitute Character otherwise. function To_Wide_Character (Item : in Character) return Wide_Character; Returns the Wide_Character X such that Character'Pos(Item) = Wide_Character'Pos (X). function To_Wide_Character (Item : in Wide_Wide_Character; Substitute : in Wide_Character := ' ') return Wide_Character; Returns the Wide_Character corresponding to Item if Is_Wide_Character(Item), and returns the Substitute Wide_Character otherwise. function To_Wide_Wide_Character (Item : in Character) return Wide_Wide_Character; Returns Wide_Wide_Character'Pos (X). the Wide_Wide_Character X such that Character'Pos(Item) = function To_Wide_Wide_Character (Item : in Wide_Character) return Wide_Wide_Character; Returns Wide_Wide_Character'Pos (X). the Wide_Wide_Character X such that Wide_Character'Pos(Item) = function To_String (Item : in Wide_String; Substitute : in Character := ' ') return String; function To_String (Item : in Wide_Wide_String; Substitute : in Character := ' ') return String; Returns the String whose range is 1..Item'Length and each of whose elements is given by To_Character of the corresponding element in Item. function To_Wide_String (Item : in String) return Wide_String; Returns the Wide_String whose range is 1..Item'Length and each of whose elements is given by To_Wide_Character of the corresponding element in Item. function To_Wide_String (Item : in Wide_Wide_String; Substitute : in Wide_Character := ' ') return Wide_String; Returns the Wide_String whose range is 1..Item'Length and each of whose elements is given by To_Wide_Character of the corresponding element in Item with the given Substitute Wide_Character. A.3.4 The Package Characters.Conversions 13 December 2012 368 Ada Reference Manual — 2012 Edition function To_Wide_Wide_String (Item : in String) return Wide_Wide_String; function To_Wide_Wide_String (Item : in Wide_String) return Wide_Wide_String; Returns the Wide_Wide_String whose range is 1..Item'Length and each of whose elements is given by To_Wide_Wide_Character of the corresponding element in Item. 34/2 35/2 A.3.5 The Package Wide_Characters.Handling The package Wide_Characters.Handling provides operations for classifying Wide_Characters and case folding for Wide_Characters. 1/3 The library package Wide_Characters.Handling has the following declaration: Static Semantics package Ada.Wide_Characters.Handling is pragma Pure(Handling); function Character_Set_Version return String; function Is_Control (Item : Wide_Character) return Boolean; function Is_Letter (Item : Wide_Character) return Boolean; function Is_Lower (Item : Wide_Character) return Boolean; function Is_Upper (Item : Wide_Character) return Boolean; function Is_Digit (Item : Wide_Character) return Boolean; function Is_Decimal_Digit (Item : Wide_Character) return Boolean renames Is_Digit; function Is_Hexadecimal_Digit (Item : Wide_Character) return Boolean; function Is_Alphanumeric (Item : Wide_Character) return Boolean; function Is_Special (Item : Wide_Character) return Boolean; function Is_Line_Terminator (Item : Wide_Character) return Boolean; function Is_Mark (Item : Wide_Character) return Boolean; function Is_Other_Format (Item : Wide_Character) return Boolean; function Is_Punctuation_Connector (Item : Wide_Character) return Boolean; function Is_Space (Item : Wide_Character) return Boolean; function Is_Graphic (Item : Wide_Character) return Boolean; function To_Lower (Item : Wide_Character) return Wide_Character; function To_Upper (Item : Wide_Character) return Wide_Character; function To_Lower (Item : Wide_String) return Wide_String; function To_Upper (Item : Wide_String) return Wide_String; end Ada.Wide_Characters.Handling; The subprograms defined in Wide_Characters.Handling are locale independent. function Character_Set_Version return String; Returns an implementation-defined identifier that identifies the version of the character set standard that is used for categorizing characters by the implementation. function Is_Control (Item : Wide_Character) return Boolean; Returns True if the Wide_Character designated by Item is categorized as other_control; otherwise returns False. 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 14/3 15/3 16/3 17/3 18/3 19/3 20/3 21/3 22/3 23/3 24/3 25/3 26/3 27/3 369 13 December 2012 The Package Characters.Conversions A.3.4 Ada Reference Manual — 2012 Edition function Is_Letter (Item : Wide_Character) return Boolean; Returns True if the Wide_Character designated by Item is categorized as letter_uppercase, letter_lowercase, letter_titlecase, letter_modifier, letter_other, or number_letter; otherwise returns False. function Is_Lower (Item : Wide_Character) return Boolean; Returns True if the Wide_Character designated by Item is categorized as letter_lowercase; otherwise returns False. function Is_Upper (Item : Wide_Character) return Boolean; Returns True if the Wide_Character designated by Item is categorized as letter_uppercase; otherwise returns False. function Is_Digit (Item : Wide_Character) return Boolean; Returns True if the Wide_Character designated by Item is categorized as number_decimal; otherwise returns False. function Is_Hexadecimal_Digit (Item : Wide_Character) return Boolean; Returns True if the Wide_Character designated by Item is categorized as number_decimal, or is in the range 'A' .. 'F' or 'a' .. 'f'; otherwise returns False. function Is_Alphanumeric (Item : Wide_Character) return Boolean; Returns True if the Wide_Character designated by Item is categorized as letter_uppercase, letter_lowercase, or letter_modifier, number_decimal; otherwise returns False. letter_titlecase, number_letter, letter_other, function Is_Special (Item : Wide_Character) return Boolean; Returns True if the Wide_Character designated by Item is categorized as graphic_character, but letter_modifier, not categorized as letter_other, number_letter, or number_decimal; otherwise returns False. letter_uppercase, letter_lowercase, letter_titlecase, function Is_Line_Terminator (Item : Wide_Character) return Boolean; Returns True if the Wide_Character designated by Item is categorized as separator_line or separator_paragraph, or if Item is a conventional line terminator character (Line_Feed, Line_Tabulation, Form_Feed, Carriage_Return, Next_Line); otherwise returns False. function Is_Mark (Item : Wide_Character) return Boolean; Returns True if the Wide_Character designated by Item is categorized as mark_non_spacing or mark_spacing_combining; otherwise returns False. function Is_Other_Format (Item : Wide_Character) return Boolean; Returns True if the Wide_Character designated by Item is categorized as other_format; otherwise returns False. function Is_Punctuation_Connector (Item : Wide_Character) return Boolean; Returns True punctuation_connector; otherwise returns False. the Wide_Character designated by if Item is categorized as 28/3 29/3 30/3 31/3 32/3 33/3 34/3 35/3 36/3 37/3 38/3 39/3 40/3 41/3 42/3 43/3 44/3 45/3 46/3 47/3 48/3 49/3 A.3.5 The Package Wide_Characters.Handling 13 December 2012 370 Ada Reference Manual — 2012 Edition function Is_Space (Item : Wide_Character) return Boolean; Returns True if the Wide_Character designated by Item is categorized as separator_space; otherwise returns False. function Is_Graphic (Item : Wide_Character) return Boolean; Returns True if the Wide_Character designated by Item is categorized as graphic_character; otherwise returns False. function To_Lower (Item : Wide_Character) return Wide_Character; Returns the Simple Lowercase Mapping as defined by documents referenced in the note in Clause 1 of ISO/IEC 10646:2011 of the Wide_Character designated by Item. If the Simple Lowercase Mapping does not exist for the Wide_Character designated by Item, then the value of Item is returned. function To_Lower (Item : Wide_String) return Wide_String; Returns the result of applying the To_Lower conversion to each Wide_Character element of the Wide_String designated by Item. The result is the null Wide_String if the value of the formal parameter is the null Wide_String. The lower bound of the result Wide_String is 1. function To_Upper (Item : Wide_Character) return Wide_Character; Returns the Simple Uppercase Mapping as defined by documents referenced in the note in Clause 1 of ISO/IEC 10646:2011 of the Wide_Character designated by Item. If the Simple Uppercase Mapping does not exist for the Wide_Character designated by Item, then the value of Item is returned. function To_Upper (Item : Wide_String) return Wide_String; Returns the result of applying the To_Upper conversion to each Wide_Character element of the Wide_String designated by Item. The result is the null Wide_String if the value of the formal parameter is the null Wide_String. The lower bound of the result Wide_String is 1. The string returned by Character_Set_Version should include either “10646:” or “Unicode”. Implementation Advice NOTES 8 The results returned by these functions may depend on which particular version of the 10646 standard is supported by the implementation (see 2.1). 9 The case insensitive equality comparison routines provided in A.4.10, “String Comparison” are also available for wide strings (see A.4.7). 50/3 51/3 52/3 53/3 54/3 55/3 56/3 57/3 58/3 59/3 60/3 61/3 62/3 63/3 64/3 A.3.6 The Package Wide_Wide_Characters.Handling The package Wide_Wide_Characters.Handling has the same contents as Wide_Characters.Handling except that each occurrence of Wide_Character is replaced by Wide_Wide_Character, and each occurrence of Wide_String is replaced by Wide_Wide_String. 1/3 371 13 December 2012 The Package Wide_Characters.Handling A.3.5 Ada Reference Manual — 2012 Edition A.4 String Handling 1/3 1 2 3 4/2 5 6 This subclause presents the specifications of the package Strings and several child packages, which provide facilities for dealing with string data. Fixed-length, bounded-length, and unbounded-length strings are supported, for String, Wide_String, and Wide_Wide_String. The string-handling subprograms include searches for pattern strings and for characters in program-specified sets, translation (via a character-to- character mapping), and transformation (replacing, inserting, overwriting, and deleting of substrings). A.4.1 The Package Strings The package Strings provides declarations common to the string handling packages. The library package Strings has the following declaration: Static Semantics package Ada.Strings is pragma Pure(Strings); Space : constant Character := ' '; Wide_Space : constant Wide_Character := ' '; Wide_Wide_Space : constant Wide_Wide_Character := ' '; Length_Error, Pattern_Error, Index_Error, Translation_Error : exception; type Alignment is (Left, Right, Center); type Truncation is (Left, Right, Error); type Membership is (Inside, Outside); type Direction is (Forward, Backward); type Trim_End is (Left, Right, Both); end Ada.Strings; A.4.2 The Package Strings.Maps 1 The package Strings.Maps defines the types, operations, and other entities needed for character sets and character-to-character mappings. The library package Strings.Maps has the following declaration: Static Semantics package Ada.Strings.Maps is pragma Pure(Maps); -- Representation for a set of character values: type Character_Set is private; pragma Preelaborable_Initialization(Character_Set); Null_Set : constant Character_Set; type Character_Range is record Low : Character; High : Character; end record; -- Represents Character range Low..High type Character_Ranges is array (Positive range <>) of Character_Range; function To_Set (Ranges : in Character_Ranges)return Character_Set; function To_Set (Span : in Character_Range)return Character_Set; function To_Ranges (Set : in Character_Set) return Character_Ranges; function "=" (Left, Right : in Character_Set) return Boolean; 2 3/2 4/2 5 6 7 8 9 10 11 A.4 String Handling 13 December 2012 372 Ada Reference Manual — 2012 Edition function "not" (Right : in Character_Set) return Character_Set; function "and" (Left, Right : in Character_Set) return Character_Set; function "or" (Left, Right : in Character_Set) return Character_Set; function "xor" (Left, Right : in Character_Set) return Character_Set; function "-" (Left, Right : in Character_Set) return Character_Set; function Is_In (Element : in Character; Set : in Character_Set) return Boolean; function Is_Subset (Elements : in Character_Set; Set : in Character_Set) return Boolean; function "<=" (Left : in Character_Set; Right : in Character_Set) return Boolean renames Is_Subset; -- Alternative representation for a set of character values: subtype Character_Sequence is String; function To_Set (Sequence : in Character_Sequence)return Character_Set; function To_Set (Singleton : in Character) return Character_Set; function To_Sequence (Set : in Character_Set) return Character_Sequence; -- Representation for a character to character mapping: type Character_Mapping is private; pragma Preelaborable_Initialization(Character_Mapping); function Value (Map : in Character_Mapping; Element : in Character) return Character; Identity : constant Character_Mapping; function To_Mapping (From, To : in Character_Sequence) return Character_Mapping; function To_Domain (Map : in Character_Mapping) return Character_Sequence; function To_Range (Map : in Character_Mapping) return Character_Sequence; type Character_Mapping_Function is access function (From : in Character) return Character; private ... -- not specified by the language end Ada.Strings.Maps; An object of type Character_Set represents a set of characters. Null_Set represents the set containing no characters. An object Obj of type Character_Range represents the set of characters in the range Obj.Low .. Obj.High. An object Obj of type Character_Ranges represents the union of the sets corresponding to Obj(I) for I in Obj'Range. function To_Set (Ranges : in Character_Ranges) return Character_Set; If Ranges'Length=0 then Null_Set is returned; otherwise, the returned value represents the set corresponding to Ranges. function To_Set (Span : in Character_Range) return Character_Set; The returned value represents the set containing each character in Span. 12 13 14 15 16 17 18 19 20/2 21 22 23 24 25 26 27 28 29 30 31 32/3 33 34 373 13 December 2012 The Package Strings.Maps A.4.2 35 36/3 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 Ada Reference Manual — 2012 Edition function To_Ranges (Set : in Character_Set) return Character_Ranges; If Set = Null_Set, then an empty Character_Ranges array is returned; otherwise, the shortest array of contiguous ranges of Character values in Set, in increasing order of Low, is returned. function "=" (Left, Right : in Character_Set) return Boolean; The function "=" returns True if Left and Right represent identical sets, and False otherwise. Each of the logical operators "not", "and", "or", and "xor" returns a Character_Set value that represents the set obtained by applying the corresponding operation to the set(s) represented by the parameter(s) of the operator. "–"(Left, Right) is equivalent to "and"(Left, "not"(Right)). function Is_In (Element : in Character; Set : in Character_Set); return Boolean; Is_In returns True if Element is in Set, and False otherwise. function Is_Subset (Elements : in Character_Set; Set : in Character_Set) return Boolean; Is_Subset returns True if Elements is a subset of Set, and False otherwise. subtype Character_Sequence is String; The Character_Sequence subtype is used to portray a set of character values and also to identify the domain and range of a character mapping. function To_Set (Sequence : in Character_Sequence) return Character_Set; function To_Set (Singleton : in Character) return Character_Set; Sequence portrays the set of character values that it explicitly contains (ignoring duplicates). Singleton portrays the set comprising a single Character. Each of the To_Set functions returns a Character_Set value that represents the set portrayed by Sequence or Singleton. function To_Sequence (Set : in Character_Set) return Character_Sequence; The function To_Sequence returns a Character_Sequence value containing each of the characters in the set represented by Set, in ascending order with no duplicates. type Character_Mapping is private; An object of type Character_Mapping represents a Character-to-Character mapping. function Value (Map : in Character_Mapping; Element : in Character) return Character; The function Value returns the Character value to which Element maps with respect to the mapping represented by Map. A character C matches a pattern character P with respect to a given Character_Mapping value Map if Value(Map, C) = P. A string S matches a pattern string P with respect to a given Character_Mapping if their lengths are the same and if each character in S matches its corresponding character in the pattern string P. 55 String handling subprograms that deal with character mappings have parameters whose type is Character_Mapping. A.4.2 The Package Strings.Maps 13 December 2012 374 Ada Reference Manual — 2012 Edition Identity : constant Character_Mapping; Identity maps each Character to itself. function To_Mapping (From, To : in Character_Sequence) return Character_Mapping; To_Mapping produces a Character_Mapping such that each element of From maps to the corresponding element of To, and each other character maps to itself. If From'Length /= To'Length, or if some character is repeated in From, then Translation_Error is propagated. function To_Domain (Map : in Character_Mapping) return Character_Sequence; To_Domain returns the shortest Character_Sequence value D such that each character not in D maps to itself, and such that the characters in D are in ascending order. The lower bound of D is 1. function To_Range (Map : in Character_Mapping) return Character_Sequence; To_Range returns the Character_Sequence value R, such that if D = To_Domain(Map), then R has the same bounds as D, and D(I) maps to R(I) for each I in D'Range. An object F of type Character_Mapping_Function maps a Character value C to the Character value F.all(C), which is said to match C with respect to mapping function F. NOTES 10 Character_Mapping and Character_Mapping_Function are used both for character equivalence mappings in the search subprograms (such as for case insensitivity) and as transformational mappings in the Translate subprograms. 11 To_Domain(Identity) and To_Range(Identity) each returns the null string. To_Mapping("ABCD", "ZZAB") returns a Character_Mapping that maps 'A' and 'B' to 'Z', 'C' to 'A', 'D' to 'B', and each other Character to itself. Examples A.4.3 Fixed-Length String Handling The language-defined package Strings.Fixed provides string-handling subprograms for fixed-length strings; that is, for values of type Standard.String. Several of these subprograms are procedures that modify the contents of a String that is passed as an out or an in out parameter; each has additional parameters to control the effect when the logical length of the result differs from the parameter's length. For each function that returns a String, the lower bound of the returned value is 1. The basic model embodied in the package is that a fixed-length string comprises significant characters and possibly padding (with space characters) on either or both ends. When a shorter string is copied to a longer string, padding is inserted, and when a longer string is copied to a shorter one, padding is stripped. The Move procedure in Strings.Fixed, which takes a String as an out parameter, allows the programmer to control these effects. Similar control is provided by the string transformation procedures. Static Semantics The library package Strings.Fixed has the following declaration: with Ada.Strings.Maps; package Ada.Strings.Fixed is pragma Preelaborate(Fixed); -- "Copy" procedure for strings of possibly different lengths 56 57 58 59 60 61 62 63/1 64 65 66 67 1 2 3 4 5 6 375 13 December 2012 The Package Strings.Maps A.4.2 Ada Reference Manual — 2012 Edition 7 8 8.1/2 8.2/2 9 10 10.1/2 11 11.1/2 12 13 14 15 procedure Move (Source : in String; Target : out String; Drop : in Truncation := Error; Justify : in Alignment := Left; Pad : in Character := Space); -- Search subprograms function Index (Source : in String; Pattern : in String; From : in Positive; Going : in Direction := Forward; Mapping : in Maps.Character_Mapping := Maps.Identity) return Natural; function Index (Source : in String; Pattern : in String; From : in Positive; Going : in Direction := Forward; Mapping : in Maps.Character_Mapping_Function) return Natural; function Index (Source : in String; Pattern : in String; Going : in Direction := Forward; Mapping : in Maps.Character_Mapping := Maps.Identity) return Natural; function Index (Source : in String; Pattern : in String; Going : in Direction := Forward; Mapping : in Maps.Character_Mapping_Function) return Natural; function Index (Source : in String; Set : in Maps.Character_Set; From : in Positive; Test : in Membership := Inside; Going : in Direction := Forward) return Natural; function Index (Source : in String; Set : in Maps.Character_Set; Test : in Membership := Inside; Going : in Direction := Forward) return Natural; function Index_Non_Blank (Source : in String; From : in Positive; Going : in Direction := Forward) return Natural; function Index_Non_Blank (Source : in String; Going : in Direction := Forward) return Natural; function Count (Source : in String; Pattern : in String; Mapping : in Maps.Character_Mapping := Maps.Identity) return Natural; function Count (Source : in String; Pattern : in String; Mapping : in Maps.Character_Mapping_Function) return Natural; function Count (Source : in String; Set : in Maps.Character_Set) return Natural; A.4.3 Fixed-Length String Handling 13 December 2012 376 Ada Reference Manual — 2012 Edition procedure Find_Token (Source : in String; Set : in Maps.Character_Set; From : in Positive; Test : in Membership; First : out Positive; Last : out Natural); procedure Find_Token (Source : in String; Set : in Maps.Character_Set; Test : in Membership; First : out Positive; Last : out Natural); -- String translation subprograms function Translate (Source : in String; Mapping : in Maps.Character_Mapping) return String; procedure Translate (Source : in out String; Mapping : in Maps.Character_Mapping); function Translate (Source : in String; Mapping : in Maps.Character_Mapping_Function) return String; procedure Translate (Source : in out String; Mapping : in Maps.Character_Mapping_Function); -- String transformation subprograms function Replace_Slice (Source : in String; Low : in Positive; High : in Natural; By : in String) return String; procedure Replace_Slice (Source : in out String; Low : in Positive; High : in Natural; By : in String; Drop : in Truncation := Error; Justify : in Alignment := Left; Pad : in Character := Space); function Insert (Source : in String; Before : in Positive; New_Item : in String) return String; procedure Insert (Source : in out String; Before : in Positive; New_Item : in String; Drop : in Truncation := Error); function Overwrite (Source : in String; Position : in Positive; New_Item : in String) return String; procedure Overwrite (Source : in out String; Position : in Positive; New_Item : in String; Drop : in Truncation := Right); function Delete (Source : in String; From : in Positive; Through : in Natural) return String; procedure Delete (Source : in out String; From : in Positive; Through : in Natural; Justify : in Alignment := Left; Pad : in Character := Space); 15.1/3 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 377 13 December 2012 Fixed-Length String Handling A.4.3 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45/3 46 47 48 49 Ada Reference Manual — 2012 Edition --String selector subprograms function Trim (Source : in String; Side : in Trim_End) return String; procedure Trim (Source : in out String; Side : in Trim_End; Justify : in Alignment := Left; Pad : in Character := Space); function Trim (Source : in String; Left : in Maps.Character_Set; Right : in Maps.Character_Set) return String; procedure Trim (Source : in out String; Left : in Maps.Character_Set; Right : in Maps.Character_Set; Justify : in Alignment := Strings.Left; Pad : in Character := Space); function Head (Source : in String; Count : in Natural; Pad : in Character := Space) return String; procedure Head (Source : in out String; Count : in Natural; Justify : in Alignment := Left; Pad : in Character := Space); function Tail (Source : in String; Count : in Natural; Pad : in Character := Space) return String; procedure Tail (Source : in out String; Count : in Natural; Justify : in Alignment := Left; Pad : in Character := Space); --String constructor functions function "*" (Left : in Natural; Right : in Character) return String; function "*" (Left : in Natural; Right : in String) return String; end Ada.Strings.Fixed; The effects of the above subprograms are as follows. procedure Move (Source : in String; Target : out String; Drop : in Truncation := Error; Justify : in Alignment := Left; Pad : in Character := Space); The Move procedure copies characters from Source to Target. If Source has the same length as Target, then the effect is to assign Source to Target. If Source is shorter than Target, then: • If Justify=Left, then Source is copied into the first Source'Length characters of Target. • If Justify=Right, then Source is copied into the last Source'Length characters of Target. • If Justify=Center, then Source is copied into the middle Source'Length characters of Target. In this case, if the difference in length between Target and Source is odd, then the extra Pad character is on the right. • Pad is copied to each Target character not otherwise assigned. A.4.3 Fixed-Length String Handling 13 December 2012 378 Ada Reference Manual — 2012 Edition If Source is longer than Target, then the effect is based on Drop. • If Drop=Left, then the rightmost Target'Length characters of Source are copied into Target. • If Drop=Right, then the leftmost Target'Length characters of Source are copied into Target. • If Drop=Error, then the effect depends on the value of the Justify parameter and also on whether any characters in Source other than Pad would fail to be copied: • If Justify=Left, and if each of the rightmost Source'Length-Target'Length characters in Source is Pad, then the leftmost Target'Length characters of Source are copied to Target. • If Justify=Right, and if each of the leftmost Source'Length-Target'Length characters in Source is Pad, then the rightmost Target'Length characters of Source are copied to Target. • Otherwise, Length_Error is propagated. function Index (Source : in String; Pattern : in String; From : in Positive; Going : in Direction := Forward; Mapping : in Maps.Character_Mapping := Maps.Identity) return Natural; function Index (Source : in String; Pattern : in String; From : in Positive; Going : in Direction := Forward; Mapping : in Maps.Character_Mapping_Function) return Natural; Each Index function searches, starting from From, for a slice of Source, with length Pattern'Length, that matches Pattern with respect to Mapping; the parameter Going indicates the direction of the lookup. If Source is the null string, Index returns 0; otherwise, if From is not in Source'Range, then Index_Error is propagated. If Going = Forward, then Index returns the smallest index I which is greater than or equal to From such that the slice of Source starting at I matches Pattern. If Going = Backward, then Index returns the largest index I such that the slice of Source starting at I matches Pattern and has an upper bound less than or equal to From. If there is no such slice, then 0 is returned. If Pattern is the null string, then Pattern_Error is propagated. function Index (Source : in String; Pattern : in String; Going : in Direction := Forward; Mapping : in Maps.Character_Mapping := Maps.Identity) return Natural; function Index (Source : in String; Pattern : in String; Going : in Direction := Forward; Mapping : in Maps.Character_Mapping_Function) return Natural; If Going = Forward, returns Index (Source, Pattern, Source'First, Forward, Mapping); otherwise, returns 50 51 52 53 54 55 56 56.1/2 56.2/3 57 58/2 58.1/2 58.2/3 379 13 December 2012 Fixed-Length String Handling A.4.3 58.3/2 58.4/2 58.5/3 59 60/2 60.1/2 60.2/3 60.3/2 60.4/2 Ada Reference Manual — 2012 Edition Index (Source, Pattern, Source'Last, Backward, Mapping); function Index (Source : in String; Set : in Maps.Character_Set; From : in Positive; Test : in Membership := Inside; Going : in Direction := Forward) return Natural; Index searches for the first or last occurrence of any of a set of characters (when Test=Inside), or any of the complement of a set of characters (when Test=Outside). If Source is the null string, Index returns 0; otherwise, if From is not in Source'Range, then Index_Error is propagated. Otherwise, it returns the smallest index I >= From (if Going=Forward) or the largest index I <= From (if Going=Backward) such that Source(I) satisfies the Test condition with respect to Set; it returns 0 if there is no such Character in Source. function Index (Source : in String; Set : in Maps.Character_Set; Test : in Membership := Inside; Going : in Direction := Forward) return Natural; If Going = Forward, returns Index (Source, Set, Source'First, Test, Forward); otherwise, returns Index (Source, Set, Source'Last, Test, Backward); function Index_Non_Blank (Source : in String; From : in Positive; Going : in Direction := Forward) return Natural; 60.5/2 Returns Index (Source, Maps.To_Set(Space), From, Outside, Going); 61 62 63 64 65 66 function Index_Non_Blank (Source : in String; Going : in Direction := Forward) return Natural; Returns Index(Source, Maps.To_Set(Space), Outside, Going) function Count (Source : in String; Pattern : in String; Mapping : in Maps.Character_Mapping := Maps.Identity) return Natural; function Count (Source : in String; Pattern : in String; Mapping : in Maps.Character_Mapping_Function) return Natural; Returns the maximum number of nonoverlapping slices of Source that match Pattern with respect to Mapping. If Pattern is the null string then Pattern_Error is propagated. function Count (Source : in String; Set : in Maps.Character_Set) return Natural; Returns the number of occurrences in Source of characters that are in Set. A.4.3 Fixed-Length String Handling 13 December 2012 380 Ada Reference Manual — 2012 Edition procedure Find_Token (Source : in String; Set : in Maps.Character_Set; From : in Positive; Test : in Membership; First : out Positive; Last : out Natural); If Source is not the null string and From is not in Source'Range, then Index_Error is raised. Otherwise, First is set to the index of the first character in Source(From .. Source'Last) that satisfies the Test condition. Last is set to the largest index such that all characters in Source(First .. Last) satisfy the Test condition. If no characters in Source(From .. Source'Last) satisfy the Test condition, First is set to From, and Last is set to 0. procedure Find_Token (Source : in String; Set : in Maps.Character_Set; Test : in Membership; First : out Positive; Last : out Natural); Equivalent to Find_Token (Source, Set, Source'First, Test, First, Last). function Translate (Source : in String; Mapping : in Maps.Character_Mapping) return String; function Translate (Source : in String; Mapping : in Maps.Character_Mapping_Function) return String; Returns the string S whose length is Source'Length and such that S(I) is the character to which Mapping maps the corresponding element of Source, for I in 1..Source'Length. procedure Translate (Source : in out String; Mapping : in Maps.Character_Mapping); procedure Translate (Source : in out String; Mapping : in Maps.Character_Mapping_Function); Equivalent to Source := Translate(Source, Mapping). function Replace_Slice (Source : in String; Low : in Positive; High : in Natural; By : in String) return String; 66.1/3 66.2/3 67 68/3 69 70 71 72 73 If Low > Source'Last+1, or High < Source'First–1, then Index_Error is propagated. Otherwise: • If High >= Low, then the returned string comprises Source(Source'First..Low–1) & By 74/1 74.1/1 & Source(High+1..Source'Last), but with lower bound 1. • If High < Low, New_Item=>By). then the returned string is Insert(Source, Before=>Low, 74.2/1 procedure Replace_Slice (Source : in out String; Low : in Positive; High : in Natural; By : in String; Drop : in Truncation := Error; Justify : in Alignment := Left; Pad : in Character := Space); 75 Equivalent to Move(Replace_Slice(Source, Low, High, By), Source, Drop, Justify, Pad). 76 381 13 December 2012 Fixed-Length String Handling A.4.3 Ada Reference Manual — 2012 Edition function Insert (Source : in String; Before : in Positive; New_Item : in String) return String; Propagates Index_Error if Before is not in Source'First .. Source'Last+1; otherwise, returns Source(Source'First..Before–1) & New_Item & Source(Before..Source'Last), but with lower bound 1. procedure Insert (Source : in out String; Before : in Positive; New_Item : in String; Drop : in Truncation := Error); Equivalent to Move(Insert(Source, Before, New_Item), Source, Drop). function Overwrite (Source : in String; Position : in Positive; New_Item : in String) return String; Propagates Index_Error if Position is not in Source'First .. Source'Last+1; otherwise, returns the string obtained from Source by consecutively replacing characters starting at Position with corresponding characters from New_Item. If the end of Source is reached before the characters in New_Item are exhausted, the remaining characters from New_Item are appended to the string. procedure Overwrite (Source : in out String; Position : in Positive; New_Item : in String; Drop : in Truncation := Right); Equivalent to Move(Overwrite(Source, Position, New_Item), Source, Drop). function Delete (Source : in String; From : in Positive; Through : in Natural) return String; If From <= Through, the returned string is Replace_Slice(Source, From, Through, ""); otherwise, it is Source with lower bound 1. procedure Delete (Source : in out String; From : in Positive; Through : in Natural; Justify : in Alignment := Left; Pad : in Character := Space); Equivalent to Move(Delete(Source, From, Through), Source, Justify => Justify, Pad => Pad). function Trim (Source : in String; Side : in Trim_End) return String; Returns the string obtained by removing from Source all leading Space characters (if Side = Left), all trailing Space characters (if Side = Right), or all leading and trailing Space characters (if Side = Both). procedure Trim (Source : in out String; Side : in Trim_End; Justify : in Alignment := Left; Pad : in Character := Space); Equivalent to Move(Trim(Source, Side), Source, Justify=>Justify, Pad=>Pad). 77 78/3 79 80 81 82/3 83 84 85 86/3 87 88 89 90 91 92 A.4.3 Fixed-Length String Handling 13 December 2012 382 Ada Reference Manual — 2012 Edition function Trim (Source : in String; Left : in Maps.Character_Set; Right : in Maps.Character_Set) return String; Returns the string obtained by removing from Source all leading characters in Left and all trailing characters in Right. procedure Trim (Source : in out String; Left : in Maps.Character_Set; Right : in Maps.Character_Set; Justify : in Alignment := Strings.Left; Pad : in Character := Space); Equivalent to Move(Trim(Source, Left, Right), Source, Justify => Justify, Pad=>Pad). function Head (Source : in String; Count : in Natural; Pad : in Character := Space) return String; Returns a string of length Count. If Count <= Source'Length, the string comprises the first Count characters of Source. Otherwise, its contents are Source concatenated with Count–Source'Length Pad characters. procedure Head (Source : in out String; Count : in Natural; Justify : in Alignment := Left; Pad : in Character := Space); 93 94 95 96 97 98/3 99 Equivalent Pad=>Pad). to Move(Head(Source, Count, Pad), Source, Drop=>Error, Justify=>Justify, 100 function Tail (Source : in String; Count : in Natural; Pad : in Character := Space) return String; Returns a string of length Count. If Count <= Source'Length, the string comprises the last Count characters of Source. Otherwise, its contents are Count-Source'Length Pad characters concatenated with Source. procedure Tail (Source : in out String; Count : in Natural; Justify : in Alignment := Left; Pad : in Character := Space); 101 102/3 103 Equivalent Pad=>Pad). to Move(Tail(Source, Count, Pad), Source, Drop=>Error, Justify=>Justify, 104 function "*" (Left : in Natural; Right : in Character) return String; function "*" (Left : in Natural; Right : in String) return String; These functions replicate a character or string a specified number of times. The first function returns a string whose length is Left and each of whose elements is Right. The second function returns a string whose length is Left*Right'Length and whose value is the null string if Left = 0 and otherwise is (Left–1)*Right & Right with lower bound 1. 105 106/1 383 13 December 2012 Fixed-Length String Handling A.4.3 Ada Reference Manual — 2012 Edition 107/3 108 109 NOTES 12 In the Index and Count functions taking Pattern and Mapping parameters, the actual String parameter passed to Pattern should comprise characters occurring as target characters of the mapping. Otherwise, the pattern will not match. 13 In the Insert subprograms, inserting at the end of a string is obtained by passing Source'Last+1 as the Before parameter. 14 If a null Character_Mapping_Function is passed to any of the string handling subprograms, Constraint_Error is propagated. 1 2 3 4 5 6 7 8 9 10 11 12 12.1/2 13 14 15 A.4.4 Bounded-Length String Handling The language-defined package Strings.Bounded provides a generic package each of whose instances yields a private type Bounded_String and a set of operations. An object of a particular Bounded_String type represents a String whose low bound is 1 and whose length can vary conceptually between 0 and a maximum size established at the generic instantiation. The subprograms for fixed-length string handling are either overloaded directly for Bounded_String, or are modified as needed to reflect the variability in length. Additionally, since the Bounded_String type is private, appropriate constructor and selector operations are provided. The library package Strings.Bounded has the following declaration: Static Semantics with Ada.Strings.Maps; package Ada.Strings.Bounded is pragma Preelaborate(Bounded); generic Max : Positive; -- Maximum length of a Bounded_String package Generic_Bounded_Length is Max_Length : constant Positive := Max; type Bounded_String is private; Null_Bounded_String : constant Bounded_String; subtype Length_Range is Natural range 0 .. Max_Length; function Length (Source : in Bounded_String) return Length_Range; -- Conversion, Concatenation, and Selection functions function To_Bounded_String (Source : in String; Drop : in Truncation := Error) return Bounded_String; function To_String (Source : in Bounded_String) return String; procedure Set_Bounded_String (Target : out Bounded_String; Source : in String; Drop : in Truncation := Error); function Append (Left, Right : in Bounded_String; Drop : in Truncation := Error) return Bounded_String; function Append (Left : in Bounded_String; Right : in String; Drop : in Truncation := Error) return Bounded_String; function Append (Left : in String; Right : in Bounded_String; Drop : in Truncation := Error) return Bounded_String; A.4.3 Fixed-Length String Handling 13 December 2012 384 Ada Reference Manual — 2012 Edition function Append (Left : in Bounded_String; Right : in Character; Drop : in Truncation := Error) return Bounded_String; function Append (Left : in Character; Right : in Bounded_String; Drop : in Truncation := Error) return Bounded_String; procedure Append (Source : in out Bounded_String; New_Item : in Bounded_String; Drop : in Truncation := Error); procedure Append (Source : in out Bounded_String; New_Item : in String; Drop : in Truncation := Error); procedure Append (Source : in out Bounded_String; New_Item : in Character; Drop : in Truncation := Error); function "&" (Left, Right : in Bounded_String) return Bounded_String; function "&" (Left : in Bounded_String; Right : in String) return Bounded_String; function "&" (Left : in String; Right : in Bounded_String) return Bounded_String; function "&" (Left : in Bounded_String; Right : in Character) return Bounded_String; function "&" (Left : in Character; Right : in Bounded_String) return Bounded_String; function Element (Source : in Bounded_String; Index : in Positive) return Character; procedure Replace_Element (Source : in out Bounded_String; Index : in Positive; By : in Character); function Slice (Source : in Bounded_String; Low : in Positive; High : in Natural) return String; function Bounded_Slice (Source : in Bounded_String; Low : in Positive; High : in Natural) return Bounded_String; procedure Bounded_Slice (Source : in Bounded_String; Target : out Bounded_String; Low : in Positive; High : in Natural); function "=" (Left, Right : in Bounded_String) return Boolean; function "=" (Left : in Bounded_String; Right : in String) return Boolean; function "=" (Left : in String; Right : in Bounded_String) return Boolean; function "<" (Left, Right : in Bounded_String) return Boolean; function "<" (Left : in Bounded_String; Right : in String) return Boolean; function "<" (Left : in String; Right : in Bounded_String) return Boolean; 16 17 18 19 20 21 22 23 24 25 26 27 28 28.1/2 28.2/2 29 30 31 32 33 385 13 December 2012 Bounded-Length String Handling A.4.4 Ada Reference Manual — 2012 Edition 34 35 36 37 38 39 40 41 42 43/2 43.1/2 43.2/2 44 45 45.1/2 46 46.1/2 47 function "<=" (Left, Right : in Bounded_String) return Boolean; function "<=" (Left : in Bounded_String; Right : in String) return Boolean; function "<=" (Left : in String; Right : in Bounded_String) return Boolean; function ">" (Left, Right : in Bounded_String) return Boolean; function ">" (Left : in Bounded_String; Right : in String) return Boolean; function ">" (Left : in String; Right : in Bounded_String) return Boolean; function ">=" (Left, Right : in Bounded_String) return Boolean; function ">=" (Left : in Bounded_String; Right : in String) return Boolean; function ">=" (Left : in String; Right : in Bounded_String) return Boolean; -- Search subprograms function Index (Source : in Bounded_String; Pattern : in String; From : in Positive; Going : in Direction := Forward; Mapping : in Maps.Character_Mapping := Maps.Identity) return Natural; function Index (Source : in Bounded_String; Pattern : in String; From : in Positive; Going : in Direction := Forward; Mapping : in Maps.Character_Mapping_Function) return Natural; function Index (Source : in Bounded_String; Pattern : in String; Going : in Direction := Forward; Mapping : in Maps.Character_Mapping := Maps.Identity) return Natural; function Index (Source : in Bounded_String; Pattern : in String; Going : in Direction := Forward; Mapping : in Maps.Character_Mapping_Function) return Natural; function Index (Source : in Bounded_String; Set : in Maps.Character_Set; From : in Positive; Test : in Membership := Inside; Going : in Direction := Forward) return Natural; function Index (Source : in Bounded_String; Set : in Maps.Character_Set; Test : in Membership := Inside; Going : in Direction := Forward) return Natural; function Index_Non_Blank (Source : in Bounded_String; From : in Positive; Going : in Direction := Forward) return Natural; function Index_Non_Blank (Source : in Bounded_String; Going : in Direction := Forward) return Natural; A.4.4 Bounded-Length String Handling 13 December 2012 386 Ada Reference Manual — 2012 Edition function Count (Source : in Bounded_String; Pattern : in String; Mapping : in Maps.Character_Mapping := Maps.Identity) return Natural; function Count (Source : in Bounded_String; Pattern : in String; Mapping : in Maps.Character_Mapping_Function) return Natural; function Count (Source : in Bounded_String; Set : in Maps.Character_Set) return Natural; procedure Find_Token (Source : in Bounded_String; Set : in Maps.Character_Set; From : in Positive; Test : in Membership; First : out Positive; Last : out Natural); procedure Find_Token (Source : in Bounded_String; Set : in Maps.Character_Set; Test : in Membership; First : out Positive; Last : out Natural); -- String translation subprograms function Translate (Source : in Bounded_String; Mapping : in Maps.Character_Mapping) return Bounded_String; procedure Translate (Source : in out Bounded_String; Mapping : in Maps.Character_Mapping); function Translate (Source : in Bounded_String; Mapping : in Maps.Character_Mapping_Function) return Bounded_String; procedure Translate (Source : in out Bounded_String; Mapping : in Maps.Character_Mapping_Function); -- String transformation subprograms function Replace_Slice (Source : in Bounded_String; Low : in Positive; High : in Natural; By : in String; Drop : in Truncation := Error) return Bounded_String; procedure Replace_Slice (Source : in out Bounded_String; Low : in Positive; High : in Natural; By : in String; Drop : in Truncation := Error); function Insert (Source : in Bounded_String; Before : in Positive; New_Item : in String; Drop : in Truncation := Error) return Bounded_String; procedure Insert (Source : in out Bounded_String; Before : in Positive; New_Item : in String; Drop : in Truncation := Error); function Overwrite (Source : in Bounded_String; Position : in Positive; New_Item : in String; Drop : in Truncation := Error) return Bounded_String; 48 49 50 50.1/3 51 52 53 54 55 56 57 58 59 60 61 62 387 13 December 2012 Bounded-Length String Handling A.4.4 Ada Reference Manual — 2012 Edition 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 procedure Overwrite (Source : in out Bounded_String; Position : in Positive; New_Item : in String; Drop : in Truncation := Error); function Delete (Source : in Bounded_String; From : in Positive; Through : in Natural) return Bounded_String; procedure Delete (Source : in out Bounded_String; From : in Positive; Through : in Natural); --String selector subprograms function Trim (Source : in Bounded_String; Side : in Trim_End) return Bounded_String; procedure Trim (Source : in out Bounded_String; Side : in Trim_End); function Trim (Source : in Bounded_String; Left : in Maps.Character_Set; Right : in Maps.Character_Set) return Bounded_String; procedure Trim (Source : in out Bounded_String; Left : in Maps.Character_Set; Right : in Maps.Character_Set); function Head (Source : in Bounded_String; Count : in Natural; Pad : in Character := Space; Drop : in Truncation := Error) return Bounded_String; procedure Head (Source : in out Bounded_String; Count : in Natural; Pad : in Character := Space; Drop : in Truncation := Error); function Tail (Source : in Bounded_String; Count : in Natural; Pad : in Character := Space; Drop : in Truncation := Error) return Bounded_String; procedure Tail (Source : in out Bounded_String; Count : in Natural; Pad : in Character := Space; Drop : in Truncation := Error); --String constructor subprograms function "*" (Left : in Natural; Right : in Character) return Bounded_String; function "*" (Left : in Natural; Right : in String) return Bounded_String; function "*" (Left : in Natural; Right : in Bounded_String) return Bounded_String; function Replicate (Count : in Natural; Item : in Character; Drop : in Truncation := Error) return Bounded_String; A.4.4 Bounded-Length String Handling 13 December 2012 388 Ada Reference Manual — 2012 Edition function Replicate (Count : in Natural; Item : in String; Drop : in Truncation := Error) return Bounded_String; function Replicate (Count : in Natural; Item : in Bounded_String; Drop : in Truncation := Error) return Bounded_String; private ... -- not specified by the language end Generic_Bounded_Length; end Ada.Strings.Bounded; Null_Bounded_String represents the null string. If an object of type Bounded_String is not otherwise initialized, it will be initialized to the same value as Null_Bounded_String. function Length (Source : in Bounded_String) return Length_Range; The Length function returns the length of the string represented by Source. function To_Bounded_String (Source : in String; Drop : in Truncation := Error) return Bounded_String; 79 80 81 82 83 84 85 86 If Source'Length <= Max_Length, then this function returns a Bounded_String that represents Source. Otherwise, the effect depends on the value of Drop: 87/3 • If Drop=Left, then the result is a Bounded_String that represents the string comprising the rightmost Max_Length characters of Source. • If Drop=Right, then the result is a Bounded_String that represents the string comprising the leftmost Max_Length characters of Source. • If Drop=Error, then Strings.Length_Error is propagated. function To_String (Source : in Bounded_String) return String; To_String returns the String value with lower bound 1 represented by Source. If B is a Bounded_String, then B = To_Bounded_String(To_String(B)). procedure Set_Bounded_String (Target : out Bounded_String; Source : in String; Drop : in Truncation := Error); Equivalent to Target := To_Bounded_String (Source, Drop); Each of the Append functions returns a Bounded_String obtained by concatenating the string or character given or represented by one of the parameters, with the string or character given or represented by the other parameter, and applying To_Bounded_String to the concatenation result string, with Drop as provided to the Append function. Each of the procedures Append(Source, New_Item, Drop) has the same effect as the corresponding assignment Source := Append(Source, New_Item, Drop). Each of the "&" functions has the same effect as the corresponding Append function, with Error as the Drop parameter. 88 89 90 91 92 92.1/2 92.2/2 93 94 95 389 13 December 2012 Bounded-Length String Handling A.4.4 96 97 98 99 100 101/1 101.1/2 101.2/2 101.3/2 Ada Reference Manual — 2012 Edition function Element (Source : in Bounded_String; Index : in Positive) return Character; Returns the character at position Index in the string represented by Source; propagates Index_Error if Index > Length(Source). procedure Replace_Element (Source : in out Bounded_String; Index : in Positive; By : in Character); Updates Source such that the character at position Index in the string represented by Source is By; propagates Index_Error if Index > Length(Source). function Slice (Source : in Bounded_String; Low : in Positive; High : in Natural) return String; Returns the slice at positions Low through High in the string represented by Source; propagates Index_Error if Low > Length(Source)+1 or High > Length(Source). The bounds of the returned string are Low and High.. function Bounded_Slice (Source : in Bounded_String; Low : in Positive; High : in Natural) return Bounded_String; Returns the slice at positions Low through High in the string represented by Source as a bounded string; propagates Index_Error if Low > Length(Source)+1 or High > Length(Source). procedure Bounded_Slice (Source : in Bounded_String; Target : out Bounded_String; Low : in Positive; High : in Natural); 101.4/2 Equivalent to Target := Bounded_Slice (Source, Low, High); 102 103 104 105/1 Each of the functions "=", "<", ">", "<=", and ">=" returns the same result as the corresponding String operation applied to the String values given or represented by the two parameters. Each of the search subprograms (Index, Index_Non_Blank, Count, Find_Token) has the same effect as the corresponding subprogram in Strings.Fixed applied to the string represented by the Bounded_String parameter. Each of the Translate subprograms, when applied to a Bounded_String, has an analogous effect to the corresponding subprogram in Strings.Fixed. For the Translate function, the translation is applied to the string represented by the Bounded_String parameter, and the result is converted (via To_Bounded_String) to a Bounded_String. For the Translate procedure, the string represented by the Bounded_String parameter after the translation is given by the Translate function for fixed-length strings applied to the string represented by the original value of the parameter. Each of the transformation subprograms (Replace_Slice, Insert, Overwrite, Delete), selector subprograms (Trim, Head, Tail), and constructor functions ("*") has an effect based on its corresponding subprogram in Strings.Fixed, and Replicate is based on Fixed."*". In the case of a function, the corresponding fixed- length string subprogram is applied to the string represented by the Bounded_String parameter. To_Bounded_String the case of Generic_Bounded_Length."*") determining the effect when the string length exceeds Max_Length. In the string, with Drop is applied (or Error result the in A.4.4 Bounded-Length String Handling 13 December 2012 390 Ada Reference Manual — 2012 Edition case of a procedure, the corresponding function in Strings.Bounded.Generic_Bounded_Length is applied, with the result assigned into the Source parameter. Bounded string objects should not be implemented by implicit pointers and dynamic allocation. 106 Implementation Advice A.4.5 Unbounded-Length String Handling The language-defined package Strings.Unbounded provides a private type Unbounded_String and a set of operations. An object of type Unbounded_String represents a String whose low bound is 1 and whose length can vary conceptually between 0 and Natural'Last. The subprograms for fixed-length string handling are either overloaded directly for Unbounded_String, or are modified as needed to reflect the flexibility in length. Since the Unbounded_String type is private, relevant constructor and selector operations are provided. The library package Strings.Unbounded has the following declaration: Static Semantics with Ada.Strings.Maps; package Ada.Strings.Unbounded is pragma Preelaborate(Unbounded); type Unbounded_String is private; pragma Preelaborable_Initialization(Unbounded_String); Null_Unbounded_String : constant Unbounded_String; function Length (Source : in Unbounded_String) return Natural; type String_Access is access all String; procedure Free (X : in out String_Access); -- Conversion, Concatenation, and Selection functions function To_Unbounded_String (Source : in String) return Unbounded_String; function To_Unbounded_String (Length : in Natural) return Unbounded_String; function To_String (Source : in Unbounded_String) return String; procedure Set_Unbounded_String (Target : out Unbounded_String; Source : in String); procedure Append (Source : in out Unbounded_String; New_Item : in Unbounded_String); procedure Append (Source : in out Unbounded_String; New_Item : in String); procedure Append (Source : in out Unbounded_String; New_Item : in Character); function "&" (Left, Right : in Unbounded_String) return Unbounded_String; function "&" (Left : in Unbounded_String; Right : in String) return Unbounded_String; function "&" (Left : in String; Right : in Unbounded_String) return Unbounded_String; function "&" (Left : in Unbounded_String; Right : in Character) return Unbounded_String; function "&" (Left : in Character; Right : in Unbounded_String) return Unbounded_String; 1 2 3 4/2 5 6 7 8 9 10 11 11.1/2 12 13 14 15 16 17 18 19 391 13 December 2012 Bounded-Length String Handling A.4.4 Ada Reference Manual — 2012 Edition 20 21 22 22.1/2 22.2/2 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 38.1/2 function Element (Source : in Unbounded_String; Index : in Positive) return Character; procedure Replace_Element (Source : in out Unbounded_String; Index : in Positive; By : in Character); function Slice (Source : in Unbounded_String; Low : in Positive; High : in Natural) return String; function Unbounded_Slice (Source : in Unbounded_String; Low : in Positive; High : in Natural) return Unbounded_String; procedure Unbounded_Slice (Source : in Unbounded_String; Target : out Unbounded_String; Low : in Positive; High : in Natural); function "=" (Left, Right : in Unbounded_String) return Boolean; function "=" (Left : in Unbounded_String; Right : in String) return Boolean; function "=" (Left : in String; Right : in Unbounded_String) return Boolean; function "<" (Left, Right : in Unbounded_String) return Boolean; function "<" (Left : in Unbounded_String; Right : in String) return Boolean; function "<" (Left : in String; Right : in Unbounded_String) return Boolean; function "<=" (Left, Right : in Unbounded_String) return Boolean; function "<=" (Left : in Unbounded_String; Right : in String) return Boolean; function "<=" (Left : in String; Right : in Unbounded_String) return Boolean; function ">" (Left, Right : in Unbounded_String) return Boolean; function ">" (Left : in Unbounded_String; Right : in String) return Boolean; function ">" (Left : in String; Right : in Unbounded_String) return Boolean; function ">=" (Left, Right : in Unbounded_String) return Boolean; function ">=" (Left : in Unbounded_String; Right : in String) return Boolean; function ">=" (Left : in String; Right : in Unbounded_String) return Boolean; -- Search subprograms function Index (Source : in Unbounded_String; Pattern : in String; From : in Positive; Going : in Direction := Forward; Mapping : in Maps.Character_Mapping := Maps.Identity) return Natural; A.4.5 Unbounded-Length String Handling 13 December 2012 392 Ada Reference Manual — 2012 Edition function Index (Source : in Unbounded_String; Pattern : in String; From : in Positive; Going : in Direction := Forward; Mapping : in Maps.Character_Mapping_Function) return Natural; function Index (Source : in Unbounded_String; Pattern : in String; Going : in Direction := Forward; Mapping : in Maps.Character_Mapping := Maps.Identity) return Natural; function Index (Source : in Unbounded_String; Pattern : in String; Going : in Direction := Forward; Mapping : in Maps.Character_Mapping_Function) return Natural; function Index (Source : in Unbounded_String; Set : in Maps.Character_Set; From : in Positive; Test : in Membership := Inside; Going : in Direction := Forward) return Natural; function Index (Source : in Unbounded_String; Set : in Maps.Character_Set; Test : in Membership := Inside; Going : in Direction := Forward) return Natural; function Index_Non_Blank (Source : in Unbounded_String; From : in Positive; Going : in Direction := Forward) return Natural; function Index_Non_Blank (Source : in Unbounded_String; Going : in Direction := Forward) return Natural; function Count (Source : in Unbounded_String; Pattern : in String; Mapping : in Maps.Character_Mapping := Maps.Identity) return Natural; function Count (Source : in Unbounded_String; Pattern : in String; Mapping : in Maps.Character_Mapping_Function) return Natural; function Count (Source : in Unbounded_String; Set : in Maps.Character_Set) return Natural; procedure Find_Token (Source : in Unbounded_String; Set : in Maps.Character_Set; From : in Positive; Test : in Membership; First : out Positive; Last : out Natural); procedure Find_Token (Source : in Unbounded_String; Set : in Maps.Character_Set; Test : in Membership; First : out Positive; Last : out Natural); -- String translation subprograms function Translate (Source : in Unbounded_String; Mapping : in Maps.Character_Mapping) return Unbounded_String; 38.2/2 39 40 40.1/2 41 41.1/2 42 43 44 45 45.1/3 46 47 48 393 13 December 2012 Unbounded-Length String Handling A.4.5 Ada Reference Manual — 2012 Edition 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 procedure Translate (Source : in out Unbounded_String; Mapping : in Maps.Character_Mapping); function Translate (Source : in Unbounded_String; Mapping : in Maps.Character_Mapping_Function) return Unbounded_String; procedure Translate (Source : in out Unbounded_String; Mapping : in Maps.Character_Mapping_Function); -- String transformation subprograms function Replace_Slice (Source : in Unbounded_String; Low : in Positive; High : in Natural; By : in String) return Unbounded_String; procedure Replace_Slice (Source : in out Unbounded_String; Low : in Positive; High : in Natural; By : in String); function Insert (Source : in Unbounded_String; Before : in Positive; New_Item : in String) return Unbounded_String; procedure Insert (Source : in out Unbounded_String; Before : in Positive; New_Item : in String); function Overwrite (Source : in Unbounded_String; Position : in Positive; New_Item : in String) return Unbounded_String; procedure Overwrite (Source : in out Unbounded_String; Position : in Positive; New_Item : in String); function Delete (Source : in Unbounded_String; From : in Positive; Through : in Natural) return Unbounded_String; procedure Delete (Source : in out Unbounded_String; From : in Positive; Through : in Natural); function Trim (Source : in Unbounded_String; Side : in Trim_End) return Unbounded_String; procedure Trim (Source : in out Unbounded_String; Side : in Trim_End); function Trim (Source : in Unbounded_String; Left : in Maps.Character_Set; Right : in Maps.Character_Set) return Unbounded_String; procedure Trim (Source : in out Unbounded_String; Left : in Maps.Character_Set; Right : in Maps.Character_Set); function Head (Source : in Unbounded_String; Count : in Natural; Pad : in Character := Space) return Unbounded_String; procedure Head (Source : in out Unbounded_String; Count : in Natural; Pad : in Character := Space); A.4.5 Unbounded-Length String Handling 13 December 2012 394 Ada Reference Manual — 2012 Edition function Tail (Source : in Unbounded_String; Count : in Natural; Pad : in Character := Space) return Unbounded_String; procedure Tail (Source : in out Unbounded_String; Count : in Natural; Pad : in Character := Space); function "*" (Left : in Natural; Right : in Character) return Unbounded_String; function "*" (Left : in Natural; Right : in String) return Unbounded_String; function "*" (Left : in Natural; Right : in Unbounded_String) return Unbounded_String; private ... -- not specified by the language end Ada.Strings.Unbounded; 67 68 69 70 71 72 The type Unbounded_String needs finalization (see 7.6). 72.1/2 Null_Unbounded_String represents the null String. If an object of type Unbounded_String is not otherwise initialized, it will be initialized to the same value as Null_Unbounded_String. The function Length returns the length of the String represented by Source. The type String_Access provides a (nonprivate) access type for explicit processing of unbounded-length strings. The procedure Free performs an unchecked deallocation of an object of type String_Access. The function To_Unbounded_String(Source : in String) returns an Unbounded_String that represents Source. The function To_Unbounded_String(Length : in Natural) returns an Unbounded_String that represents an uninitialized String whose length is Length. The function To_String returns the String with lower bound 1 represented by Source. To_String and To_Unbounded_String are related as follows: • If S is a String, then To_String(To_Unbounded_String(S)) = S. • If U is an Unbounded_String, then To_Unbounded_String(To_String(U)) = U. 73 74 75 76 77 78 79 The procedure Set_Unbounded_String sets Target to an Unbounded_String that represents Source. 79.1/2 For each of the Append procedures, the resulting string represented by the Source parameter is given by the concatenation of the original value of Source and the value of New_Item. Each of the "&" functions returns an Unbounded_String obtained by concatenating the string or character given or represented by one of the parameters, with the string or character given or represented by the other parameter, and applying To_Unbounded_String to the concatenation result string. The Element, Replace_Element, and Slice subprograms have the same effect as the corresponding bounded-length string subprograms. 80 81 82 The function Unbounded_Slice returns the slice at positions Low through High in the string represented by Source as an Unbounded_String. The procedure Unbounded_Slice sets Target to the Unbounded_String representing the slice at positions Low through High in the string represented by Source. Both subprograms propagate Index_Error if Low > Length(Source)+1 or High > Length(Source). 82.1/3 395 13 December 2012 Unbounded-Length String Handling A.4.5 Ada Reference Manual — 2012 Edition 83 84 85 86 87 Each of the functions "=", "<", ">", "<=", and ">=" returns the same result as the corresponding String operation applied to the String values given or represented by Left and Right. Each of the search subprograms (Index, Index_Non_Blank, Count, Find_Token) has the same effect as the corresponding subprogram in Strings.Fixed applied to the string represented by the Unbounded_String parameter. The Translate function has an analogous effect to the corresponding subprogram in Strings.Fixed. The translation is applied to the string represented by the Unbounded_String parameter, and the result is converted (via To_Unbounded_String) to an Unbounded_String. Each of the transformation functions (Replace_Slice, Insert, Overwrite, Delete), selector functions (Trim, Head, Tail), and constructor functions ("*") is likewise analogous to its corresponding subprogram in Strings.Fixed. For each of the subprograms, the corresponding fixed-length string subprogram is applied to the string represented by the Unbounded_String parameter, and To_Unbounded_String is applied the result string. For each of the procedures Translate, Replace_Slice, Insert, Overwrite, Delete, Trim, Head, and Tail, the resulting string represented by the Source parameter is given by the corresponding function for fixed- length strings applied to the string represented by Source's original value. 88 No storage associated with an Unbounded_String object shall be lost upon assignment or scope exit. Implementation Requirements A.4.6 String-Handling Sets and Mappings 1 The language-defined package Strings.Maps.Constants declares Character_Set and Character_Mapping constants corresponding to classification and conversion functions in package Characters.Handling. 2 3/2 4 5 6 The library package Strings.Maps.Constants has the following declaration: Static Semantics package Ada.Strings.Maps.Constants is pragma Pure(Constants); Control_Set : constant Character_Set; Graphic_Set : constant Character_Set; Letter_Set : constant Character_Set; Lower_Set : constant Character_Set; Upper_Set : constant Character_Set; Basic_Set : constant Character_Set; Decimal_Digit_Set : constant Character_Set; Hexadecimal_Digit_Set : constant Character_Set; Alphanumeric_Set : constant Character_Set; Special_Set : constant Character_Set; ISO_646_Set : constant Character_Set; Lower_Case_Map : constant Character_Mapping; --Maps to lower case for letters, else identity Upper_Case_Map : constant Character_Mapping; --Maps to upper case for letters, else identity Basic_Map : constant Character_Mapping; --Maps to basic letter for letters, else identity private ... -- not specified by the language end Ada.Strings.Maps.Constants; A.4.5 Unbounded-Length String Handling 13 December 2012 396 Ada Reference Manual — 2012 Edition Each of these constants represents a correspondingly named set of characters or character mapping in Characters.Handling (see A.3.2). NOTES 15 There are certain characters which are defined to be lower case letters by ISO 10646 and are therefore allowed in identifiers, but are not considered lower case letters by Ada.Strings.Maps.Constants. A.4.7 Wide_String Handling Facilities for handling strings of Wide_Character elements are found in the packages Strings.Wide_Maps, Strings.Wide_Fixed, Strings.Wide_Bounded, Strings.Wide_Unbounded, and Strings.Wide_Maps.Wide_- Constants, and in the library functions Strings.Wide_Hash, Strings.Wide_Fixed.Wide_Hash, Strings.- Wide_Bounded.Wide_Hash, Strings.Wide_Hash_Case_- Strings.Wide_Unbounded.Wide_Hash, Insensitive, Strings.Wide_Fixed.Wide_Hash_Case_Insensitive, Strings.Wide_Bounded.Wide_Hash_- Case_Insensitive, Strings.Wide_Unbounded.Wide_Hash_Case_Insensitive, Strings.Wide_Equal_Case_- Insensitive, Strings.Wide_Fixed.Wide_Equal_Case_Insensitive, Strings.Wide_Bounded.Wide_Equal_- Case_Insensitive, and Strings.Wide_Unbounded.Wide_Equal_Case_Insensitive. They provide the same string-handling operations as the corresponding packages and functions for strings of Character elements. The package Strings.Wide_Maps has the following declaration. Static Semantics package Ada.Strings.Wide_Maps is pragma Preelaborate(Wide_Maps); -- Representation for a set of Wide_Character values: type Wide_Character_Set is private; pragma Preelaborable_Initialization(Wide_Character_Set); Null_Set : constant Wide_Character_Set; type Wide_Character_Range is record Low : Wide_Character; High : Wide_Character; end record; -- Represents Wide_Character range Low..High type Wide_Character_Ranges is array (Positive range <>) of Wide_Character_Range; function To_Set (Ranges : in Wide_Character_Ranges) return Wide_Character_Set; function To_Set (Span : in Wide_Character_Range) return Wide_Character_Set; function To_Ranges (Set : in Wide_Character_Set) return Wide_Character_Ranges; function "=" (Left, Right : in Wide_Character_Set) return Boolean; function "not" (Right : in Wide_Character_Set) return Wide_Character_Set; function "and" (Left, Right : in Wide_Character_Set) return Wide_Character_Set; function "or" (Left, Right : in Wide_Character_Set) return Wide_Character_Set; function "xor" (Left, Right : in Wide_Character_Set) return Wide_Character_Set; function "-" (Left, Right : in Wide_Character_Set) return Wide_Character_Set; function Is_In (Element : in Wide_Character; Set : in Wide_Character_Set) return Boolean; 7 8/3 1/3 2 3 4/2 5 6 7 8 9 10 11 12 13 397 13 December 2012 String-Handling Sets and Mappings A.4.6 Ada Reference Manual — 2012 Edition function Is_Subset (Elements : in Wide_Character_Set; Set : in Wide_Character_Set) return Boolean; function "<=" (Left : in Wide_Character_Set; Right : in Wide_Character_Set) return Boolean renames Is_Subset; -- Alternative representation for a set of Wide_Character values: subtype Wide_Character_Sequence is Wide_String; function To_Set (Sequence : in Wide_Character_Sequence) return Wide_Character_Set; function To_Set (Singleton : in Wide_Character) return Wide_Character_Set; function To_Sequence (Set : in Wide_Character_Set) return Wide_Character_Sequence; -- Representation for a Wide_Character to Wide_Character mapping: type Wide_Character_Mapping is private; pragma Preelaborable_Initialization(Wide_Character_Mapping); function Value (Map : in Wide_Character_Mapping; Element : in Wide_Character) return Wide_Character; Identity : constant Wide_Character_Mapping; function To_Mapping (From, To : in Wide_Character_Sequence) return Wide_Character_Mapping; function To_Domain (Map : in Wide_Character_Mapping) return Wide_Character_Sequence; function To_Range (Map : in Wide_Character_Mapping) return Wide_Character_Sequence; type Wide_Character_Mapping_Function is access function (From : in Wide_Character) return Wide_Character; private ... -- not specified by the language end Ada.Strings.Wide_Maps; The context clause for each of the packages Strings.Wide_Fixed, Strings.Wide_Bounded, and Strings.Wide_Unbounded identifies Strings.Wide_Maps instead of Strings.Maps. 14 15 16 17 18 19 20/2 21 22 23 24 25 26 27 28 28.1/3 Types Wide_Character_Set and Wide_Character_Mapping need finalization. 29/3 30 31 32 33 34 35 36 of each packages and Strings.Fixed, library and For the Strings.Maps.Constants, Strings.Fixed.Hash, Strings.Bounded.Hash, Strings.Unbounded.Hash, Strings.Hash_Case_Insensitive, Strings.Fixed.Hash_- Case_Insensitive, Strings.Bounded.Hash_Case_Insensitive, Strings.Unbounded.Hash_Case_Insensitive, Strings.Equal_Case_Insensitive, Strings.Fixed.Equal_Case_Insensitive, Strings.Bounded.Equal_Case_- Insensitive, and Strings.Unbounded.Equal_Case_Insensitive, the corresponding wide string package or function has the same contents except that Strings.Unbounded, Strings.Bounded, Strings.Hash, functions for • Wide_Space replaces Space • Wide_Character replaces Character • Wide_String replaces String • Wide_Character_Set replaces Character_Set • Wide_Character_Mapping replaces Character_Mapping • Wide_Character_Mapping_Function replaces Character_Mapping_Function • Wide_Maps replaces Maps A.4.7 Wide_String Handling 13 December 2012 398 Ada Reference Manual — 2012 Edition • Bounded_Wide_String replaces Bounded_String • Null_Bounded_Wide_String replaces Null_Bounded_String • To_Bounded_Wide_String replaces To_Bounded_String • To_Wide_String replaces To_String • Set_Bounded_Wide_String replaces Set_Bounded_String • Unbounded_Wide_String replaces Unbounded_String • Null_Unbounded_Wide_String replaces Null_Unbounded_String • Wide_String_Access replaces String_Access • To_Unbounded_Wide_String replaces To_Unbounded_String • Set_Unbounded_Wide_String replaces Set_Unbounded_String The following additional declaration is present in Strings.Wide_Maps.Wide_Constants: Character_Set : constant Wide_Maps.Wide_Character_Set; --Contains each Wide_Character value WC such that --Characters.Conversions.Is_Character(WC) is True Each Wide_Character_Set constant in the package Strings.Wide_Maps.Wide_Constants contains no values outside the Character portion of Wide_Character. Similarly, each Wide_Character_Mapping constant in this package is the identity mapping when applied to any element outside the Character portion of Wide_Character. Pragma Pure is replaced by pragma Preelaborate in Strings.Wide_Maps.Wide_Constants. NOTES 16 If a null Wide_Character_Mapping_Function is passed to any of the Wide_String handling subprograms, Constraint_Error is propagated. A.4.8 Wide_Wide_String Handling Facilities for handling strings of Wide_Wide_Character elements are found in the packages Strings.- Wide_Wide_Maps, Strings.Wide_Wide_Fixed, Strings.Wide_Wide_Bounded, Strings.Wide_Wide_- Unbounded, and Strings.Wide_Wide_Maps.Wide_Wide_Constants, and in the library functions Strings.- Wide_Wide_Hash, Strings.Wide_Wide_Fixed.Wide_Wide_Hash, Strings.Wide_Wide_Bounded.Wide_- Strings.Wide_Wide_Hash_Case_- Wide_Hash, Strings.Wide_Wide_- Insensitive, Bounded.Wide_Wide_Hash_Case_Insensitive, Strings.Wide_Wide_Unbounded.Wide_Wide_Hash_- Case_Insensitive, Strings.Wide_Wide_Equal_Case_Insensitive, Strings.Wide_Wide_Fixed.Wide_Wide_- Equal_Case_Insensitive, and Strings.Wide_Wide_Unbounded.Wide_Wide_Equal_Case_Insensitive. They provide the same string- handling operations as the corresponding packages and functions for strings of Character elements. Strings.Wide_Wide_Unbounded.Wide_Wide_Hash, Strings.Wide_Wide_Fixed.Wide_Wide_Hash_Case_Insensitive, Strings.Wide_Wide_Bounded.Wide_Wide_Equal_Case_Insensitive, Static Semantics The library package Strings.Wide_Wide_Maps has the following declaration. package Ada.Strings.Wide_Wide_Maps is pragma Preelaborate(Wide_Wide_Maps); -- Representation for a set of Wide_Wide_Character values: type Wide_Wide_Character_Set is private; pragma Preelaborable_Initialization(Wide_Wide_Character_Set); Null_Set : constant Wide_Wide_Character_Set; 399 13 December 2012 Wide_String Handling A.4.7 37 38 39 40 40.1/2 41 42 43 44 44.1/2 45 46/2 46.1/2 46.2/2 47 1/3 2/2 3/2 4/2 5/2 Ada Reference Manual — 2012 Edition 6/2 7/2 8/2 9/2 10/2 11/2 12/2 13/2 14/2 15/2 16/2 17/2 18/2 19/2 20/2 21/2 22/2 23/2 24/2 25/2 type Wide_Wide_Character_Range is record Low : Wide_Wide_Character; High : Wide_Wide_Character; end record; -- Represents Wide_Wide_Character range Low..High type Wide_Wide_Character_Ranges is array (Positive range <>) of Wide_Wide_Character_Range; function To_Set (Ranges : in Wide_Wide_Character_Ranges) return Wide_Wide_Character_Set; function To_Set (Span : in Wide_Wide_Character_Range) return Wide_Wide_Character_Set; function To_Ranges (Set : in Wide_Wide_Character_Set) return Wide_Wide_Character_Ranges; function "=" (Left, Right : in Wide_Wide_Character_Set) return Boolean; function "not" (Right : in Wide_Wide_Character_Set) return Wide_Wide_Character_Set; function "and" (Left, Right : in Wide_Wide_Character_Set) return Wide_Wide_Character_Set; function "or" (Left, Right : in Wide_Wide_Character_Set) return Wide_Wide_Character_Set; function "xor" (Left, Right : in Wide_Wide_Character_Set) return Wide_Wide_Character_Set; function "-" (Left, Right : in Wide_Wide_Character_Set) return Wide_Wide_Character_Set; function Is_In (Element : in Wide_Wide_Character; Set : in Wide_Wide_Character_Set) return Boolean; function Is_Subset (Elements : in Wide_Wide_Character_Set; Set : in Wide_Wide_Character_Set) return Boolean; function "<=" (Left : in Wide_Wide_Character_Set; Right : in Wide_Wide_Character_Set) return Boolean renames Is_Subset; -- Alternative representation for a set of Wide_Wide_Character values: subtype Wide_Wide_Character_Sequence is Wide_Wide_String; function To_Set (Sequence : in Wide_Wide_Character_Sequence) return Wide_Wide_Character_Set; function To_Set (Singleton : in Wide_Wide_Character) return Wide_Wide_Character_Set; function To_Sequence (Set : in Wide_Wide_Character_Set) return Wide_Wide_Character_Sequence; -- Representation for a Wide_Wide_Character to Wide_Wide_Character -- mapping: type Wide_Wide_Character_Mapping is private; pragma Preelaborable_Initialization(Wide_Wide_Character_Mapping); function Value (Map : in Wide_Wide_Character_Mapping; Element : in Wide_Wide_Character) return Wide_Wide_Character; Identity : constant Wide_Wide_Character_Mapping; function To_Mapping (From, To : in Wide_Wide_Character_Sequence) return Wide_Wide_Character_Mapping; function To_Domain (Map : in Wide_Wide_Character_Mapping) return Wide_Wide_Character_Sequence; function To_Range (Map : in Wide_Wide_Character_Mapping) return Wide_Wide_Character_Sequence; A.4.8 Wide_Wide_String Handling 13 December 2012 400 Ada Reference Manual — 2012 Edition type Wide_Wide_Character_Mapping_Function is access function (From : in Wide_Wide_Character) return Wide_Wide_Character; private ... -- not specified by the language end Ada.Strings.Wide_Wide_Maps; The context clause for each of the packages Strings.Wide_Wide_Fixed, Strings.Wide_Wide_Bounded, and Strings.Wide_Wide_Unbounded identifies Strings.Wide_Wide_Maps instead of Strings.Maps. Types Wide_Wide_Character_Set and Wide_Wide_Character_Mapping need finalization. For each of the packages Strings.Fixed, Strings.Bounded, Strings.Unbounded, and Strings.- Maps.Constants, and for library functions Strings.Hash, Strings.Fixed.Hash, Strings.Bounded.Hash, Strings.Unbounded.Hash, Strings.Hash_Case_Insensitive, Strings.Fixed.Hash_Case_Insensitive, Strings.- Bounded.Hash_Case_Insensitive, Strings.Equal_Case_- Insensitive, Strings.Fixed.Equal_Case_Insensitive, Strings.Bounded.Equal_Case_Insensitive, and Strings.- Unbounded.Equal_Case_Insensitive, the corresponding wide wide string package or function has the same contents except that Strings.Unbounded.Hash_Case_Insensitive, • Wide_Wide_Space replaces Space • Wide_Wide_Character replaces Character • Wide_Wide_String replaces String • Wide_Wide_Character_Set replaces Character_Set • Wide_Wide_Character_Mapping replaces Character_Mapping • Wide_Wide_Character_Mapping_Function replaces Character_Mapping_Function • Wide_Wide_Maps replaces Maps • Bounded_Wide_Wide_String replaces Bounded_String • Null_Bounded_Wide_Wide_String replaces Null_Bounded_String • To_Bounded_Wide_Wide_String replaces To_Bounded_String • To_Wide_Wide_String replaces To_String • Set_Bounded_Wide_Wide_String replaces Set_Bounded_String • Unbounded_Wide_Wide_String replaces Unbounded_String • Null_Unbounded_Wide_Wide_String replaces Null_Unbounded_String • Wide_Wide_String_Access replaces String_Access • To_Unbounded_Wide_Wide_String replaces To_Unbounded_String • Set_Unbounded_Wide_Wide_String replaces Set_Unbounded_String The following additional declarations are present in Strings.Wide_Wide_Maps.Wide_Wide_Constants: Character_Set : constant Wide_Wide_Maps.Wide_Wide_Character_Set; -- Contains each Wide_Wide_Character value WWC such that -- Characters.Conversions.Is_Character(WWC) is True Wide_Character_Set : constant Wide_Wide_Maps.Wide_Wide_Character_Set; -- Contains each Wide_Wide_Character value WWC such that -- Characters.Conversions.Is_Wide_Character(WWC) is True 26/2 27/2 28/2 28.1/3 29/3 30/2 31/2 32/2 33/2 34/2 35/2 36/2 37/2 38/2 39/2 40/2 41/2 42/2 43/2 44/2 45/2 46/2 47/2 48/2 Each Wide_Wide_Character_Set constant in the package Strings.Wide_Wide_Maps.Wide_Wide_- Constants contains no values outside the Character portion of Wide_Wide_Character. Similarly, each 49/2 401 13 December 2012 Wide_Wide_String Handling A.4.8 Ada Reference Manual — 2012 Edition Wide_Wide_Character_Mapping constant in this package is the identity mapping when applied to any element outside the Character portion of Wide_Wide_Character. 50/2 Pragma Pure is replaced by pragma Preelaborate in Strings.Wide_Wide_Maps.Wide_Wide_Constants. 51/2 NOTES 17 If a null Wide_Wide_Character_Mapping_Function is passed to any of the Wide_Wide_String handling subprograms, Constraint_Error is propagated. A.4.9 String Hashing The library function Strings.Hash has the following declaration: Static Semantics with Ada.Containers; function Ada.Strings.Hash (Key : String) return Containers.Hash_Type; pragma Pure(Ada.Strings.Hash); Returns an implementation-defined value which is a function of the value of Key. If A and B are strings such that A equals B, Hash(A) equals Hash(B). The library function Strings.Fixed.Hash has the following declaration: with Ada.Containers, Ada.Strings.Hash; function Ada.Strings.Fixed.Hash (Key : String) return Containers.Hash_Type renames Ada.Strings.Hash; The generic library function Strings.Bounded.Hash has the following declaration: with Ada.Containers; generic with package Bounded is new Ada.Strings.Bounded.Generic_Bounded_Length (<>); function Ada.Strings.Bounded.Hash (Key : Bounded.Bounded_String) return Containers.Hash_Type; pragma Preelaborate(Ada.Strings.Bounded.Hash); Equivalent to Strings.Hash (Bounded.To_String (Key)); The library function Strings.Unbounded.Hash has the following declaration: with Ada.Containers; function Ada.Strings.Unbounded.Hash (Key : Unbounded_String) return Containers.Hash_Type; pragma Preelaborate(Ada.Strings.Unbounded.Hash); Equivalent to Strings.Hash (To_String (Key)); 1/2 2/3 3/2 4/2 5/3 6/2 7/3 8/3 9/2 10/3 11/3 11.1/3 The library function Strings.Hash_Case_Insensitive has the following declaration: 11.2/3 11.3/3 with Ada.Containers; function Ada.Strings.Hash_Case_Insensitive (Key : String) return Containers.Hash_Type; pragma Pure(Ada.Strings.Hash_Case_Insensitive); Returns an implementation-defined value which is a function of the value of Key, converted to lower case. If A and B are strings such that Strings.Equal_Case_Insensitive (A, B) (see A.4.10) is True, then Hash_Case_Insensitive(A) equals Hash_Case_Insensitive(B). 11.4/3 The library function Strings.Fixed.Hash_Case_Insensitive has the following declaration: 11.5/3 with Ada.Containers, Ada.Strings.Hash_Case_Insensitive; function Ada.Strings.Fixed.Hash_Case_Insensitive (Key : String) return Containers.Hash_Type renames Ada.Strings.Hash_Case_Insensitive; A.4.8 Wide_Wide_String Handling 13 December 2012 402 Ada Reference Manual — 2012 Edition The generic library function Strings.Bounded.Hash_Case_Insensitive has the following declaration: with Ada.Containers; generic with package Bounded is new Ada.Strings.Bounded.Generic_Bounded_Length (<>); function Ada.Strings.Bounded.Hash_Case_Insensitive (Key : Bounded.Bounded_String) return Containers.Hash_Type; pragma Preelaborate(Ada.Strings.Bounded.Hash_Case_Insensitive); Equivalent to Strings.Hash_Case_Insensitive (Bounded.To_String (Key)); The library function Strings.Unbounded.Hash_Case_Insensitive has the following declaration: with Ada.Containers; function Ada.Strings.Unbounded.Hash_Case_Insensitive (Key : Unbounded_String) return Containers.Hash_Type; pragma Preelaborate(Ada.Strings.Unbounded.Hash_Case_Insensitive); Equivalent to Strings.Hash_Case_Insensitive (To_String (Key)); 11.6/3 11.7/3 11.8/3 11.9/3 11.10/3 11.11/3 The Hash functions should be good hash functions, returning a wide spread of values for different string values. It should be unlikely for similar strings to return the same value. 12/2 Implementation Advice A.4.10 String Comparison The library function Strings.Equal_Case_Insensitive has the following declaration: function Ada.Strings.Equal_Case_Insensitive (Left, Right : String) return Boolean; pragma Pure(Ada.Strings.Equal_Case_Insensitive); Static Semantics Returns True if the strings consist of the same sequence of characters after applying locale- independent simple case folding, as defined by documents referenced in the note in Clause 1 of ISO/IEC 10646:2011. Otherwise, returns False. This function uses the same method as is used to determine whether two identifiers are the same. The library function Strings.Fixed.Equal_Case_Insensitive has the following declaration: with Ada.Strings.Equal_Case_Insensitive; function Ada.Strings.Fixed.Equal_Case_Insensitive (Left, Right : String) return Boolean renames Ada.Strings.Equal_Case_Insensitive; The generic library function Strings.Bounded.Equal_Case_Insensitive has the following declaration: generic with package Bounded is new Ada.Strings.Bounded.Generic_Bounded_Length (<>); function Ada.Strings.Bounded.Equal_Case_Insensitive (Left, Right : Bounded.Bounded_String) return Boolean; pragma Preelaborate(Ada.Strings.Bounded.Equal_Case_Insensitive); 1/3 2/3 3/3 4/3 5/3 6/3 7/3 Equivalent to Strings.Equal_Case_Insensitive (Bounded.To_String (Left), Bounded.To_String (Right)); 8/3 The library function Strings.Unbounded.Equal_Case_Insensitive has the following declaration: function Ada.Strings.Unbounded.Equal_Case_Insensitive (Left, Right : Unbounded_String) return Boolean; pragma Preelaborate(Ada.Strings.Unbounded.Equal_Case_Insensitive); 9/3 10/3 403 13 December 2012 String Hashing A.4.9 11/3 12/3 13/3 14/3 15/3 16/3 17/3 18/3 19/3 20/3 21/3 22/3 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 Ada Reference Manual — 2012 Edition Equivalent to Strings.Equal_Case_Insensitive (To_String (Left), To_String (Right)); The library function Strings.Less_Case_Insensitive has the following declaration: function Ada.Strings.Less_Case_Insensitive (Left, Right : String) return Boolean; pragma Pure(Ada.Strings.Less_Case_Insensitive); Performs a lexicographic comparison of strings Left and Right, converted to lower case. The library function Strings.Fixed.Less_Case_Insensitive has the following declaration: with Ada.Strings.Less_Case_Insensitive; function Ada.Strings.Fixed.Less_Case_Insensitive (Left, Right : String) return Boolean renames Ada.Strings.Less_Case_Insensitive; The generic library function Strings.Bounded.Less_Case_Insensitive has the following declaration: generic with package Bounded is new Ada.Strings.Bounded.Generic_Bounded_Length (<>); function Ada.Strings.Bounded.Less_Case_Insensitive (Left, Right : Bounded.Bounded_String) return Boolean; pragma Preelaborate(Ada.Strings.Bounded.Less_Case_Insensitive); Equivalent to Strings.Less_Case_Insensitive (Bounded.To_String (Left), Bounded.To_String (Right)); The library function Strings.Unbounded.Less_Case_Insensitive has the following declaration: function Ada.Strings.Unbounded.Less_Case_Insensitive (Left, Right : Unbounded_String) return Boolean; pragma Preelaborate(Ada.Strings.Unbounded.Less_Case_Insensitive); Equivalent to Strings.Less_Case_Insensitive (To_String (Left), To_String (Right)); A.4.11 String Encoding Facilities for encoding, decoding, and converting strings in various character encoding schemes are provided Strings.- UTF_Encoding.Strings, Strings.UTF_Encoding.- Wide_Wide_Strings. Strings.UTF_Encoding.Wide_Strings, Strings.UTF_Encoding.Conversions, Strings.UTF_Encoding, packages and by The encoding library packages have the following declarations: Static Semantics package Ada.Strings.UTF_Encoding is pragma Pure (UTF_Encoding); -- Declarations common to the string encoding packages type Encoding_Scheme is (UTF_8, UTF_16BE, UTF_16LE); subtype UTF_String is String; subtype UTF_8_String is String; subtype UTF_16_Wide_String is Wide_String; Encoding_Error : exception; BOM_8 : constant UTF_8_String := Character'Val(16#EF#) & Character'Val(16#BB#) & Character'Val(16#BF#); A.4.10 String Comparison 13 December 2012 404 Ada Reference Manual — 2012 Edition BOM_16BE : constant UTF_String := Character'Val(16#FE#) & Character'Val(16#FF#); BOM_16LE : constant UTF_String := Character'Val(16#FF#) & Character'Val(16#FE#); BOM_16 : constant UTF_16_Wide_String := (1 => Wide_Character'Val(16#FEFF#)); function Encoding (Item : UTF_String; Default : Encoding_Scheme := UTF_8) return Encoding_Scheme; end Ada.Strings.UTF_Encoding; package Ada.Strings.UTF_Encoding.Conversions is pragma Pure (Conversions); -- Conversions between various encoding schemes function Convert (Item : UTF_String; Input_Scheme : Encoding_Scheme; Output_Scheme : Encoding_Scheme; Output_BOM : Boolean := False) return UTF_String; function Convert (Item : UTF_String; Input_Scheme : Encoding_Scheme; Output_BOM : Boolean := False) return UTF_16_Wide_String; function Convert (Item : UTF_8_String; Output_BOM : Boolean := False) return UTF_16_Wide_String; function Convert (Item : UTF_16_Wide_String; Output_Scheme : Encoding_Scheme; Output_BOM : Boolean := False) return UTF_String; function Convert (Item : UTF_16_Wide_String; Output_BOM : Boolean := False) return UTF_8_String; end Ada.Strings.UTF_Encoding.Conversions; package Ada.Strings.UTF_Encoding.Strings is pragma Pure (Strings); -- Encoding / decoding between String and various encoding schemes function Encode (Item : String; Output_Scheme : Encoding_Scheme; Output_BOM : Boolean := False) return UTF_String; function Encode (Item : String; Output_BOM : Boolean := False) return UTF_8_String; function Encode (Item : String; Output_BOM : Boolean := False) return UTF_16_Wide_String; function Decode (Item : UTF_String; Input_Scheme : Encoding_Scheme) return String; function Decode (Item : UTF_8_String) return String; function Decode (Item : UTF_16_Wide_String) return String; end Ada.Strings.UTF_Encoding.Strings; package Ada.Strings.UTF_Encoding.Wide_Strings is pragma Pure (Wide_Strings); -- Encoding / decoding between Wide_String and various encoding schemes function Encode (Item : Wide_String; Output_Scheme : Encoding_Scheme; Output_BOM : Boolean := False) return UTF_String; function Encode (Item : Wide_String; Output_BOM : Boolean := False) return UTF_8_String; 10/3 11/3 12/3 13/3 14/3 15/3 16/3 17/3 18/3 19/3 20/3 21/3 22/3 23/3 24/3 25/3 26/3 27/3 28/3 29/3 30/3 31/3 32/3 405 13 December 2012 String Encoding A.4.11 Ada Reference Manual — 2012 Edition 33/3 34/3 35/3 36/3 37/3 38/3 39/3 40/3 41/3 42/3 43/3 44/3 45/3 46/3 47/3 48/3 49/3 50/3 function Encode (Item : Wide_String; Output_BOM : Boolean := False) return UTF_16_Wide_String; function Decode (Item : UTF_String; Input_Scheme : Encoding_Scheme) return Wide_String; function Decode (Item : UTF_8_String) return Wide_String; function Decode (Item : UTF_16_Wide_String) return Wide_String; end Ada.Strings.UTF_Encoding.Wide_Strings; package Ada.Strings.UTF_Encoding.Wide_Wide_Strings is pragma Pure (Wide_Wide_Strings); -- Encoding / decoding between Wide_Wide_String and various encoding schemes function Encode (Item : Wide_Wide_String; Output_Scheme : Encoding_Scheme; Output_BOM : Boolean := False) return UTF_String; function Encode (Item : Wide_Wide_String; Output_BOM : Boolean := False) return UTF_8_String; function Encode (Item : Wide_Wide_String; Output_BOM : Boolean := False) return UTF_16_Wide_String; function Decode (Item : UTF_String; Input_Scheme : Encoding_Scheme) return Wide_Wide_String; function Decode (Item : UTF_8_String) return Wide_Wide_String; function Decode (Item : UTF_16_Wide_String) return Wide_Wide_String; end Ada.Strings.UTF_Encoding.Wide_Wide_Strings; The type Encoding_Scheme defines encoding schemes. UTF_8 corresponds to the UTF-8 encoding scheme defined by Annex D of ISO/IEC 10646. UTF_16BE corresponds to the UTF-16 encoding scheme defined by Annex C of ISO/IEC 10646 in 8 bit, big-endian order; and UTF_16LE corresponds to the UTF- 16 encoding scheme in 8 bit, little-endian order. The subtype UTF_String is used to represent a String of 8-bit values containing a sequence of values encoded in one of three ways (UTF-8, UTF-16BE, or UTF-16LE). The subtype UTF_8_String is used to represent a String of 8-bit values containing a sequence of values encoded in UTF-8. The subtype UTF_16_Wide_String is used to represent a Wide_String of 16-bit values containing a sequence of values encoded in UTF-16. The BOM_8, BOM_16BE, BOM_16LE, and BOM_16 constants correspond to values used at the start of a string to indicate the encoding. Each of the Encode functions takes a String, Wide_String, or Wide_Wide_String Item parameter that is assumed to be an array of unencoded characters. Each of the Convert functions takes a UTF_String, UTF_8_String, or UTF_16_String Item parameter that is assumed to contain characters whose position values correspond to a valid encoding sequence according to the encoding scheme required by the function or specified by its Input_Scheme parameter. Each of the Convert and Encode functions returns a UTF_String, UTF_8_String, or UTF_16_String value whose characters have position values that correspond to the encoding of the Item parameter according to the encoding scheme required by the function or specified by its Output_Scheme parameter. For UTF_8, no overlong encoding is returned. A BOM is included at the start of the returned string if the Output_BOM parameter is set to True. The lower bound of the returned string is 1. 51/3 Each of the Decode functions takes a UTF_String, UTF_8_String, or UTF_16_String Item parameter which is assumed to contain characters whose position values correspond to a valid encoding sequence according to the encoding scheme required by the function or specified by its Input_Scheme parameter, A.4.11 String Encoding 13 December 2012 406 Ada Reference Manual — 2012 Edition and returns the corresponding String, Wide_String, or Wide_Wide_String value. The lower bound of the returned string is 1. For each of the Convert and Decode functions, an initial BOM in the input that matches the expected encoding scheme is ignored, and a different initial BOM causes Encoding_Error to be propagated. The exception Encoding_Error is also propagated in the following situations: • By a Decode function when a UTF encoded string contains an invalid encoding sequence. • By a Decode function when the expected encoding is UTF-16BE or UTF-16LE and the input string has an odd length. • By a Decode function yielding a String when the decoding of a sequence results in a code point whose value exceeds 16#FF#. • By a Decode function yielding a Wide_String when the decoding of a sequence results in a code point whose value exceeds 16#FFFF#. • By an Encode function taking a Wide_String as input when an invalid character appears in the input. In particular, the characters whose position is in the range 16#D800# .. 16#DFFF# are invalid because they conflict with UTF-16 surrogate encodings, and the characters whose position is 16#FFFE# or 16#FFFF# are also invalid because they conflict with BOM codes. function Encoding (Item : UTF_String; Default : Encoding_Scheme := UTF_8) return Encoding_Scheme; Inspects a UTF_String value to determine whether it starts with a BOM for UTF-8, UTF-16BE, or UTF_16LE. If so, returns the scheme corresponding to the BOM; otherwise, returns the value of Default. function Convert (Item : UTF_String; Input_Scheme : Encoding_Scheme; Output_Scheme : Encoding_Scheme; Output_BOM : Boolean := False) return UTF_String; Returns the value of Item (originally encoded in UTF-8, UTF-16LE, or UTF-16BE as specified by Input_Scheme) encoded in one of these three schemes as specified by Output_Scheme. function Convert (Item : UTF_String; Input_Scheme : Encoding_Scheme; Output_BOM : Boolean := False) return UTF_16_Wide_String; Returns the value of Item (originally encoded in UTF-8, UTF-16LE, or UTF-16BE as specified by Input_Scheme) encoded in UTF-16. function Convert (Item : UTF_8_String; Output_BOM : Boolean := False) return UTF_16_Wide_String; Returns the value of Item (originally encoded in UTF-8) encoded in UTF-16. function Convert (Item : UTF_16_Wide_String; Output_Scheme : Encoding_Scheme; Output_BOM : Boolean := False) return UTF_String; Returns the value of Item (originally encoded in UTF-16) encoded in UTF-8, UTF-16LE, or UTF-16BE as specified by Output_Scheme. 52/3 53/3 54/3 55/3 56/3 57/3 58/3 59/3 60/3 61/3 62/3 63/3 64/3 65/3 66/3 67/3 68/3 407 13 December 2012 String Encoding A.4.11 Ada Reference Manual — 2012 Edition 69/3 70/3 71/3 72/3 73/3 74/3 75/3 76/3 77/3 78/3 79/3 80/3 81/3 82/3 83/3 84/3 85/3 86/3 87/3 88/3 89/3 90/3 91/3 92/3 93/3 94/3 function Convert (Item : UTF_16_Wide_String; Output_BOM : Boolean := False) return UTF_8_String; Returns the value of Item (originally encoded in UTF-16) encoded in UTF-8. function Encode (Item : String; Output_Scheme : Encoding_Scheme; Output_BOM : Boolean := False) return UTF_String; Returns the value of Item encoded in UTF-8, UTF-16LE, or UTF-16BE as specified by Output_Scheme. function Encode (Item : String; Output_BOM : Boolean := False) return UTF_8_String; Returns the value of Item encoded in UTF-8. function Encode (Item : String; Output_BOM : Boolean := False) return UTF_16_Wide_String; Returns the value of Item encoded in UTF_16. function Decode (Item : UTF_String; Input_Scheme : Encoding_Scheme) return String; Returns the result of decoding Item, which is encoded in UTF-8, UTF-16LE, or UTF-16BE as specified by Input_Scheme. function Decode (Item : UTF_8_String) return String; Returns the result of decoding Item, which is encoded in UTF-8. function Decode (Item : UTF_16_Wide_String) return String; Returns the result of decoding Item, which is encoded in UTF-16. function Encode (Item : Wide_String; Output_Scheme : Encoding_Scheme; Output_BOM : Boolean := False) return UTF_String; Returns the value of Item encoded in UTF-8, UTF-16LE, or UTF-16BE as specified by Output_Scheme. function Encode (Item : Wide_String; Output_BOM : Boolean := False) return UTF_8_String; Returns the value of Item encoded in UTF-8. function Encode (Item : Wide_String; Output_BOM : Boolean := False) return UTF_16_Wide_String; Returns the value of Item encoded in UTF_16. function Decode (Item : UTF_String; Input_Scheme : Encoding_Scheme) return Wide_String; Returns the result of decoding Item, which is encoded in UTF-8, UTF-16LE, or UTF-16BE as specified by Input_Scheme. function Decode (Item : UTF_8_String) return Wide_String; Returns the result of decoding Item, which is encoded in UTF-8. function Decode (Item : UTF_16_Wide_String) return Wide_String; Returns the result of decoding Item, which is encoded in UTF-16. A.4.11 String Encoding 13 December 2012 408 Ada Reference Manual — 2012 Edition function Encode (Item : Wide_Wide_String; Output_Scheme : Encoding_Scheme; Output_BOM : Boolean := False) return UTF_String; Returns the value of Item encoded in UTF-8, UTF-16LE, or UTF-16BE as specified by Output_Scheme. function Encode (Item : Wide_Wide_String; Output_BOM : Boolean := False) return UTF_8_String; Returns the value of Item encoded in UTF-8. function Encode (Item : Wide_Wide_String; Output_BOM : Boolean := False) return UTF_16_Wide_String; Returns the value of Item encoded in UTF_16. function Decode (Item : UTF_String; Input_Scheme : Encoding_Scheme) return Wide_Wide_String; Returns the result of decoding Item, which is encoded in UTF-8, UTF-16LE, or UTF-16BE as specified by Input_Scheme. function Decode (Item : UTF_8_String) return Wide_Wide_String; Returns the result of decoding Item, which is encoded in UTF-8. function Decode (Item : UTF_16_Wide_String) return Wide_Wide_String; Returns the result of decoding Item, which is encoded in UTF-16. 95/3 96/3 97/3 98/3 99/3 100/3 101/3 102/3 103/3 104/3 105/3 106/3 Implementation Advice If an implementation supports other encoding schemes, another similar child of Ada.Strings should be defined. 107/3 NOTES 18 A BOM (Byte-Order Mark, code position 16#FEFF#) can be included in a file or other entity to indicate the encoding; it is skipped when decoding. Typically, only the first line of a file or other entity contains a BOM. When decoding, the Encoding function can be called on the first line to determine the encoding; this encoding will then be used in subsequent calls to Decode to convert all of the lines to an internal format. 108/3 A.5 The Numerics Packages The library package Numerics is the parent of several child units that provide facilities for mathematical computation. One child, the generic package Generic_Elementary_Functions, is defined in A.5.1, together with nongeneric equivalents; two others, the package Float_Random and the generic package Discrete_Random, are defined in A.5.2. Additional (optional) children are defined in Annex G, “Numerics”. This paragraph was deleted. Static Semantics 1 2/1 409 13 December 2012 String Encoding A.4.11 Ada Reference Manual — 2012 Edition 3/2 package Ada.Numerics is pragma Pure(Numerics); Argument_Error : exception; Pi : constant := 3.14159_26535_89793_23846_26433_83279_50288_41971_69399_37511; π : constant := Pi; e : constant := 2.71828_18284_59045_23536_02874_71352_66249_77572_47093_69996; end Ada.Numerics; 4 The Argument_Error exception is raised by a subprogram in a child unit of Numerics to signal that one or more of the actual subprogram parameters are outside the domain of the corresponding mathematical function. 5 The implementation may specify the values of Pi and e to a larger number of significant digits. Implementation Permissions 1 2 3 4 5 A.5.1 Elementary Functions Implementation-defined approximations to the mathematical functions known as the “elementary functions” are provided by the subprograms in Numerics.Generic_Elementary_Functions. Nongeneric equivalents of this generic package for each of the predefined floating point types are also provided as children of Numerics. The generic library package Numerics.Generic_Elementary_Functions has the following declaration: Static Semantics generic type Float_Type is digits <>; package Ada.Numerics.Generic_Elementary_Functions is pragma Pure(Generic_Elementary_Functions); function Sqrt (X : Float_Type'Base) return Float_Type'Base; function Log (X : Float_Type'Base) return Float_Type'Base; function Log (X, Base : Float_Type'Base) return Float_Type'Base; function Exp (X : Float_Type'Base) return Float_Type'Base; function "**" (Left, Right : Float_Type'Base) return Float_Type'Base; function Sin (X : Float_Type'Base) return Float_Type'Base; function Sin (X, Cycle : Float_Type'Base) return Float_Type'Base; function Cos (X : Float_Type'Base) return Float_Type'Base; function Cos (X, Cycle : Float_Type'Base) return Float_Type'Base; function Tan (X : Float_Type'Base) return Float_Type'Base; function Tan (X, Cycle : Float_Type'Base) return Float_Type'Base; function Cot (X : Float_Type'Base) return Float_Type'Base; function Cot (X, Cycle : Float_Type'Base) return Float_Type'Base; A.5 The Numerics Packages 13 December 2012 410 Ada Reference Manual — 2012 Edition function Arcsin (X : Float_Type'Base) return Float_Type'Base; function Arcsin (X, Cycle : Float_Type'Base) return Float_Type'Base; function Arccos (X : Float_Type'Base) return Float_Type'Base; function Arccos (X, Cycle : Float_Type'Base) return Float_Type'Base; function Arctan (Y : Float_Type'Base; X : Float_Type'Base := 1.0) return Float_Type'Base; function Arctan (Y : Float_Type'Base; X : Float_Type'Base := 1.0; Cycle : Float_Type'Base) return Float_Type'Base; function Arccot (X : Float_Type'Base; Y : Float_Type'Base := 1.0) return Float_Type'Base; function Arccot (X : Float_Type'Base; Y : Float_Type'Base := 1.0; Cycle : Float_Type'Base) return Float_Type'Base; function Sinh (X : Float_Type'Base) return Float_Type'Base; function Cosh (X : Float_Type'Base) return Float_Type'Base; function Tanh (X : Float_Type'Base) return Float_Type'Base; function Coth (X : Float_Type'Base) return Float_Type'Base; function Arcsinh (X : Float_Type'Base) return Float_Type'Base; function Arccosh (X : Float_Type'Base) return Float_Type'Base; function Arctanh (X : Float_Type'Base) return Float_Type'Base; function Arccoth (X : Float_Type'Base) return Float_Type'Base; end Ada.Numerics.Generic_Elementary_Functions; The library package Numerics.Elementary_Functions is declared pure and defines the same subprograms as Numerics.Generic_Elementary_Functions, except that the predefined type Float is systematically substituted for Float_Type'Base throughout. Nongeneric equivalents of Numerics.Generic_Elementary_- Functions for each of the other predefined floating point types are defined similarly, with the names Numerics.Short_Elementary_Functions, Numerics.Long_Elementary_Functions, etc. The functions have their usual mathematical meanings. When the Base parameter is specified, the Log function computes the logarithm to the given base; otherwise, it computes the natural logarithm. When the Cycle parameter is specified, the parameter X of the forward trigonometric functions (Sin, Cos, Tan, and Cot) and the results of the inverse trigonometric functions (Arcsin, Arccos, Arctan, and Arccot) are measured in units such that a full cycle of revolution has the given value; otherwise, they are measured in radians. The computed results of the mathematically multivalued functions are rendered single-valued by the following conventions, which are meant to imply the principal branch: • The results of the Sqrt and Arccosh functions and that of the exponentiation operator are nonnegative. • The result of the Arcsin function is in the quadrant containing the point (1.0, x), where x is the value of the parameter X. This quadrant is I or IV; thus, the range of the Arcsin function is approximately –π/2.0 to π/2.0 (–Cycle/4.0 to Cycle/4.0, if the parameter Cycle is specified). • The result of the Arccos function is in the quadrant containing the point (x, 1.0), where x is the value of the parameter X. This quadrant is I or II; thus, the Arccos function ranges from 0.0 to approximately π (Cycle/2.0, if the parameter Cycle is specified). • The results of the Arctan and Arccot functions are in the quadrant containing the point (x, y), where x and y are the values of the parameters X and Y, respectively. This may be any quadrant (I through IV) when the parameter X (resp., Y) of Arctan (resp., Arccot) is specified, but it is restricted to quadrants I and IV (resp., I and II) when that parameter is omitted. Thus, the range when that parameter is specified is approximately –π to π (–Cycle/2.0 to Cycle/2.0, if the parameter Cycle is specified); when omitted, the range of Arctan (resp., Arccot) is that of Arcsin 6 7 8 9/1 10 11 12 13 14 15 411 13 December 2012 Elementary Functions A.5.1 Ada Reference Manual — 2012 Edition 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 (resp., Arccos), as given above. When the point (x, y) lies on the negative x-axis, the result approximates • π (resp., –π) when the sign of the parameter Y is positive (resp., negative), if Float_Type'Signed_Zeros is True; • π, if Float_Type'Signed_Zeros is False. (In the case of the inverse trigonometric functions, in which a result lying on or near one of the axes may not be exactly representable, the approximation inherent in computing the result may place it in an adjacent quadrant, close to but on the wrong side of the axis.) Dynamic Semantics The exception Numerics.Argument_Error is raised, signaling a parameter value outside the domain of the corresponding mathematical function, in the following cases: • by any forward or inverse trigonometric function with specified cycle, when the value of the parameter Cycle is zero or negative; • by the Log function with specified base, when the value of the parameter Base is zero, one, or negative; • by the Sqrt and Log functions, when the value of the parameter X is negative; • by the exponentiation operator, when the value of the left operand is negative or when both operands have the value zero; • by the Arcsin, Arccos, and Arctanh functions, when the absolute value of the parameter X exceeds one; • by the Arctan and Arccot functions, when the parameters X and Y both have the value zero; • by the Arccosh function, when the value of the parameter X is less than one; and • by the Arccoth function, when the absolute value of the parameter X is less than one. The exception Constraint_Error is raised, signaling a pole of the mathematical function (analogous to dividing by zero), in the following cases, provided that Float_Type'Machine_Overflows is True: • by the Log, Cot, and Coth functions, when the value of the parameter X is zero; • by the exponentiation operator, when the value of the left operand is zero and the value of the exponent is negative; • by the Tan function with specified cycle, when the value of the parameter X is an odd multiple of the quarter cycle; • by the Cot function with specified cycle, when the value of the parameter X is zero or a multiple of the half cycle; and • by the Arctanh and Arccoth functions, when the absolute value of the parameter X is one. Constraint_Error can also be raised when a finite result overflows (see G.2.4); this may occur for parameter values sufficiently near poles, and, in the case of some of the functions, for parameter values with sufficiently large magnitudes. When Float_Type'Machine_Overflows is False, the result at poles is unspecified. 35 When one parameter of a function with multiple parameters represents a pole and another is outside the function's domain, the latter takes precedence (i.e., Numerics.Argument_Error is raised). A.5.1 Elementary Functions 13 December 2012 412 Ada Reference Manual — 2012 Edition Implementation Requirements In the implementation of Numerics.Generic_Elementary_Functions, the range of intermediate values allowed during the calculation of a final result shall not be affected by any range constraint of the subtype Float_Type. In the following cases, evaluation of an elementary function shall yield the prescribed result, provided that the preceding rules do not call for an exception to be raised: • When the parameter X has the value zero, the Sqrt, Sin, Arcsin, Tan, Sinh, Arcsinh, Tanh, and Arctanh functions yield a result of zero, and the Exp, Cos, and Cosh functions yield a result of one. • When the parameter X has the value one, the Sqrt function yields a result of one, and the Log, Arccos, and Arccosh functions yield a result of zero. • When the parameter Y has the value zero and the parameter X has a positive value, the Arctan and Arccot functions yield a result of zero. • The results of the Sin, Cos, Tan, and Cot functions with specified cycle are exact when the mathematical result is zero; those of the first two are also exact when the mathematical result is ± 1.0. • Exponentiation by a zero exponent yields the value one. Exponentiation by a unit exponent yields the value of the left operand. Exponentiation of the value one yields the value one. Exponentiation of the value zero yields the value zero. Other accuracy requirements for the elementary functions, which apply only in implementations conforming to the Numerics Annex, and then only in the “strict” mode defined there (see G.2), are given in G.2.4. When Float_Type'Signed_Zeros is True, the sign of a zero result shall be as follows: • A prescribed zero result delivered at the origin by one of the odd functions (Sin, Arcsin, Sinh, Arcsinh, Tan, Arctan or Arccot as a function of Y when X is fixed and positive, Tanh, and Arctanh) has the sign of the parameter X (Y, in the case of Arctan or Arccot). • A prescribed zero result delivered by one of the odd functions away from the origin, or by some other elementary function, has an implementation-defined sign. • A zero result that is not a prescribed result (i.e., one that results from rounding or underflow) has the correct mathematical sign. The nongeneric equivalent packages may, but need not, be actual instantiations of the generic package for the appropriate predefined type. Implementation Permissions A.5.2 Random Number Generation Facilities for the generation of pseudo-random floating point numbers are provided in the package Numerics.Float_Random; the generic package Numerics.Discrete_Random provides similar facilities for the generation of pseudo-random integers and pseudo-random values of enumeration types. For brevity, pseudo-random values of any of these types are called random numbers. Some of the facilities provided are basic to all applications of random numbers. These include a limited private type each of whose objects serves as the generator of a (possibly distinct) sequence of random numbers; a function to obtain the “next” random number from a given sequence of random numbers (that 36 37 38 39 40 41 42 43 44 45 46 47 48 1 2 413 13 December 2012 Elementary Functions A.5.1 Ada Reference Manual — 2012 Edition is, from its generator); and subprograms to initialize or reinitialize a given generator to a time-dependent state or a state denoted by a single integer. Other facilities are provided specifically for advanced applications. These include subprograms to save and restore the state of a given generator; a private type whose objects can be used to hold the saved state of a generator; and subprograms to obtain a string representation of a given generator state, or, given such a string representation, the corresponding state. The library package Numerics.Float_Random has the following declaration: Static Semantics package Ada.Numerics.Float_Random is -- Basic facilities type Generator is limited private; subtype Uniformly_Distributed is Float range 0.0 .. 1.0; function Random (Gen : Generator) return Uniformly_Distributed; procedure Reset (Gen : in Generator; Initiator : in Integer); procedure Reset (Gen : in Generator); -- Advanced facilities type State is private; procedure Save (Gen : in Generator; To_State : out State); procedure Reset (Gen : in Generator; From_State : in State); Max_Image_Width : constant := implementation-defined integer value; function Image (Of_State : State) return String; function Value (Coded_State : String) return State; private ... -- not specified by the language end Ada.Numerics.Float_Random; 3 4 5 6 7 8 9 10 11 12 13 14 15 15.1/2 The type Generator needs finalization (see 7.6). 16 17 18 19 20 21 22 23 24 25 26 The generic library package Numerics.Discrete_Random has the following declaration: generic type Result_Subtype is (<>); package Ada.Numerics.Discrete_Random is -- Basic facilities type Generator is limited private; function Random (Gen : Generator) return Result_Subtype; procedure Reset (Gen : in Generator; Initiator : in Integer); procedure Reset (Gen : in Generator); -- Advanced facilities type State is private; procedure Save (Gen : in Generator; To_State : out State); procedure Reset (Gen : in Generator; From_State : in State); Max_Image_Width : constant := implementation-defined integer value; function Image (Of_State : State) return String; function Value (Coded_State : String) return State; A.5.2 Random Number Generation 13 December 2012 414 Ada Reference Manual — 2012 Edition private ... -- not specified by the language end Ada.Numerics.Discrete_Random; The type Generator needs finalization (see 7.6) in every instantiation of Numerics.Discrete_Random. An object of the limited private type Generator is associated with a sequence of random numbers. Each generator has a hidden (internal) state, which the operations on generators use to determine the position in the associated sequence. All generators are implicitly initialized to an unspecified state that does not vary from one program execution to another; they may also be explicitly initialized, or reinitialized, to a time- dependent state, to a previously saved state, or to a state uniquely denoted by an integer value. 27 27.1/2 28 An object of the private type State can be used to hold the internal state of a generator. Such objects are only needed if the application is designed to save and restore generator states or to examine or manufacture them. The implicit initial value of type State corresponds to the implicit initial value of all generators. 29/3 The operations on generators affect the state and therefore the future values of the associated sequence. The semantics of the operations on generators and states are defined below. function Random (Gen : Generator) return Uniformly_Distributed; function Random (Gen : Generator) return Result_Subtype; to an implementation-defined algorithm. The Obtains the “next” random number from the given generator, relative to its current state, according in Numerics.Float_Random is delivered as a value of the subtype Uniformly_Distributed, which is a subtype of the predefined type Float having a range of 0.0 .. 1.0. The result of the function in an instantiation of Numerics.Discrete_Random is delivered as a value of the generic formal subtype Result_Subtype. result of function the procedure Reset (Gen : in Generator; Initiator : in Integer); procedure Reset (Gen : in Generator); Sets the state of the specified generator to one that is an unspecified function of the value of the parameter Initiator (or to a time-dependent state, if only a generator parameter is specified). The latter form of the procedure is known as the time-dependent Reset procedure. procedure Save (Gen : in Generator; To_State : out State); procedure Reset (Gen : in Generator; From_State : in State); Save obtains the current state of a generator. Reset gives a generator the specified state. A generator that is reset to a state previously obtained by invoking Save is restored to the state it had when Save was invoked. function Image (Of_State : State) return String; function Value (Coded_State : String) return State; Image provides a representation of a state coded (in an implementation-defined way) as a string whose length is bounded by the value of Max_Image_Width. Value is the inverse of Image: Value(Image(S)) = S for each state S that can be obtained from a generator by invoking Save. Instantiation of Numerics.Discrete_Random with a subtype having a null range raises Constraint_Error. Dynamic Semantics This paragraph was deleted. 415 13 December 2012 Random Number Generation A.5.2 30 31 32 33 34 35 36 37 38 39 40/1 Ada Reference Manual — 2012 Edition Bounded (Run-Time) Errors 40.1/1 It is a bounded error to invoke Value with a string that is not the image of any generator state. If the error is detected, Constraint_Error or Program_Error is raised. Otherwise, a call to Reset with the resulting state will produce a generator such that calls to Random with this generator will produce a sequence of values of the appropriate subtype, but which might not be random in character. That is, the sequence of values might not fulfill the implementation requirements of this subclause. 41 42 43 44 45 46 47 48 49 50 Implementation Requirements A sufficiently long sequence of random numbers obtained by successive calls to Random is approximately uniformly distributed over the range of the result subtype. The Random function in an instantiation of Numerics.Discrete_Random is guaranteed to yield each value in its result subtype in a finite number of calls, provided that the number of such values does not exceed 2 15. Other performance requirements for the random number generator, which apply only in implementations conforming to the Numerics Annex, and then only in the “strict” mode defined there (see G.2), are given in G.2.5. Documentation Requirements No one algorithm for random number generation is best for all applications. To enable the user to determine the suitability of the random number generators for the intended application, the implementation shall describe the algorithm used and shall give its period, if known exactly, or a lower bound on the period, if the exact period is unknown. Periods that are so long that the periodicity is unobservable in practice can be described in such terms, without giving a numerical bound. The implementation also shall document the minimum time interval between calls to the time-dependent Reset procedure that are guaranteed to initiate different sequences, and it shall document the nature of the strings that Value will accept without raising Constraint_Error. Implementation Advice Any storage associated with an object of type Generator should be reclaimed on exit from the scope of the object. If the generator period is sufficiently long in relation to the number of distinct initiator values, then each possible value of Initiator passed to Reset should initiate a sequence of random numbers that does not, in a practical sense, overlap the sequence initiated by any other value. If this is not possible, then the mapping between initiator values and generator states should be a rapidly varying function of the initiator value. NOTES 19 If two or more tasks are to share the same generator, then the tasks have to synchronize their access to the generator as for any shared variable (see 9.10). 20 Within a given implementation, a repeatable random number sequence can be obtained by relying on the implicit initialization of generators or by explicitly initializing a generator with a repeatable initiator value. Different sequences of random numbers can be obtained from a given generator in different program executions by explicitly initializing the generator to a time-dependent state. 21 A given implementation of the Random function in Numerics.Float_Random may or may not be capable of delivering the values 0.0 or 1.0. Portable applications should assume that these values, or values sufficiently close to them to behave indistinguishably from them, can occur. If a sequence of random integers from some fixed range is needed, the application should use the Random function in an appropriate instantiation of Numerics.Discrete_Random, rather than transforming the result of the Random function in Numerics.Float_Random. However, some applications with unusual requirements, such as for a sequence of random integers each drawn from a different range, will find it more convenient to transform the result of the floating point Random function. For M ≥ 1, the expression A.5.2 Random Number Generation 13 December 2012 416 51 52 53/2 54 55 56 57 58 Ada Reference Manual — 2012 Edition Integer(Float(M) * Random(G)) mod M transforms the result of Random(G) to an integer uniformly distributed over the range 0 .. M–1; it is valid even if Random delivers 0.0 or 1.0. Each value of the result range is possible, provided that M is not too large. Exponentially distributed (floating point) random numbers with mean and standard deviation 1.0 can be obtained by the transformation -Log(Random(G) + Float'Model_Small) where Log comes from Numerics.Elementary_Functions (see A.5.1); the addition of Float'Model_Small avoids the exception that would be raised were Log to be given the value zero, without affecting the result (in most implementations) when Random returns a nonzero value. this expression, in Examples Example of a program that plays a simulated dice game: with Ada.Numerics.Discrete_Random; procedure Dice_Game is subtype Die is Integer range 1 .. 6; subtype Dice is Integer range 2*Die'First .. 2*Die'Last; package Random_Die is new Ada.Numerics.Discrete_Random (Die); use Random_Die; G : Generator; D : Dice; begin Reset (G); -- Start the generator in a unique state in each run loop -- Roll a pair of dice; sum and process the results D := Random(G) + Random(G); ... end loop; end Dice_Game; Example of a program that simulates coin tosses: with Ada.Numerics.Discrete_Random; procedure Flip_A_Coin is type Coin is (Heads, Tails); package Random_Coin is new Ada.Numerics.Discrete_Random (Coin); use Random_Coin; G : Generator; begin Reset (G); -- Start the generator in a unique state in each run loop -- Toss a coin and process the result case Random(G) is when Heads => ... when Tails => ... end case; ... end loop; end Flip_A_Coin; 417 13 December 2012 Random Number Generation A.5.2 59 60 61 1 2 3 4 5 6 Ada Reference Manual — 2012 Edition Example of a parallel simulation of a physical system, with a separate generator of event probabilities in each task: with Ada.Numerics.Float_Random; procedure Parallel_Simulation is use Ada.Numerics.Float_Random; task type Worker is entry Initialize_Generator (Initiator : in Integer); ... end Worker; W : array (1 .. 10) of Worker; task body Worker is G : Generator; Probability_Of_Event : Uniformly_Distributed; begin accept Initialize_Generator (Initiator : in Integer) do Reset (G, Initiator); end Initialize_Generator; loop ... Probability_Of_Event := Random(G); ... end loop; end Worker; begin -- Initialize the generators in the Worker tasks to different states for I in W'Range loop W(I).Initialize_Generator (I); end loop; ... -- Wait for the Worker tasks to terminate end Parallel_Simulation; NOTES 22 Notes on the last example: Although each Worker task initializes its generator to a different state, those states will be the same in every execution of the program. The generator states can be initialized uniquely in each program execution by instantiating Ada.Numerics.Discrete_Random for the type Integer in the main procedure, resetting the generator obtained from that instance to a time-dependent state, and then using random integers obtained from that generator to initialize the generators in each Worker task. A.5.3 Attributes of Floating Point Types Static Semantics The following representation-oriented attributes are defined for every subtype S of a floating point type T. S'Machine_Radix Yields the radix of the hardware representation of the type T. The value of this attribute is of the type universal_integer. The values of other representation-oriented attributes of a floating point subtype, and of the “primitive function” attributes of a floating point subtype described later, are defined in terms of a particular representation of nonzero values called the canonical form. The canonical form (for the type T) is the form ± mantissa · T'Machine_Radixexponent where • mantissa is a fraction in the number base T'Machine_Radix, the first digit of which is nonzero, and • exponent is an integer. S'Machine_Mantissa Yields the largest value of p such that every value expressible in the canonical form (for the type T), having a p-digit mantissa and an exponent between T'Machine_Emin and A.5.2 Random Number Generation 13 December 2012 418 Ada Reference Manual — 2012 Edition T'Machine_Emax, is a machine number (see 3.5.7) of the type T. This attribute yields a value of the type universal_integer. S'Machine_Emin Yields the smallest (most negative) value of exponent such that every value expressible in the canonical form (for the type T), having a mantissa of T'Machine_Mantissa digits, is a machine number (see 3.5.7) of the type T. This attribute yields a value of the type universal_integer. S'Machine_Emax S'Denorm Yields the largest (most positive) value of exponent such that every value expressible in the canonical form (for the type T), having a mantissa of T'Machine_Mantissa digits, is a machine number (see 3.5.7) of the type T. This attribute yields a value of the type universal_integer. Yields the value True if every value expressible in the form ± mantissa · T'Machine_RadixT'Machine_Emin where mantissa is a nonzero T'Machine_Mantissa-digit fraction in the number base T'Machine_Radix, the first digit of which is zero, is a machine number (see 3.5.7) of the type T; yields the value False otherwise. The value of this attribute is of the predefined type Boolean. The values described by the formula in the definition of S'Denorm are called denormalized numbers. A nonzero machine number that is not a denormalized number is a normalized number. A normalized number x of a given type T is said to be represented in canonical form when it is expressed in the canonical form (for the type T) with a mantissa having T'Machine_Mantissa digits; the resulting form is the canonical-form representation of x. S'Machine_Rounds Yields the value True if rounding is performed on inexact results of every predefined operation that yields a result of the type T; yields the value False otherwise. The value of this attribute is of the predefined type Boolean. S'Machine_Overflows Yields the value True if overflow and divide-by-zero are detected and reported by raising Constraint_Error for every predefined operation that yields a result of the type T; yields the value False otherwise. The value of this attribute is of the predefined type Boolean. S'Signed_Zeros Yields the value True if the hardware representation for the type T has the capability of representing both positively and negatively signed zeros, these being generated and used by the predefined operations of the type T as specified in IEC 559:1989; yields the value False otherwise. The value of this attribute is of the predefined type Boolean. For every value x of a floating point type T, the normalized exponent of x is defined as follows: the normalized exponent of zero is (by convention) zero; • • for nonzero x, the normalized exponent of x is the unique integer k such that T'Machine_Radixk–1 ≤ |x| < T'Machine_Radixk. The following primitive function attributes are defined for any subtype S of a floating point type T. S'Exponent S'Exponent denotes a function with the following specification: function S'Exponent (X : T) return universal_integer The function yields the normalized exponent of X. 419 13 December 2012 Attributes of Floating Point Types A.5.3 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Ada Reference Manual — 2012 Edition 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 S'Fraction S'Fraction denotes a function with the following specification: function S'Fraction (X : T) return T The function yields the value X · T'Machine_Radix–k, where k is the normalized exponent of X. A zero result, which can only occur when X is zero, has the sign of X. S'Compose S'Compose denotes a function with the following specification: function S'Compose (Fraction : T; Exponent : universal_integer) return T Let v be the value Fraction · T'Machine_RadixExponent–k, where k is the normalized exponent of Fraction. If v is a machine number of the type T, or if |v| ≥ T'Model_Small, the function yields v; otherwise, it yields either one of the machine numbers of the type T adjacent to v. Constraint_Error is optionally raised if v is outside the base range of S. A zero result has the sign of Fraction when S'Signed_Zeros is True. S'Scaling S'Scaling denotes a function with the following specification: function S'Scaling (X : T; Adjustment : universal_integer) return T Let v be the value X · T'Machine_RadixAdjustment. If v is a machine number of the type T, or if |v| ≥ T'Model_Small, the function yields v; otherwise, it yields either one of the machine numbers of the type T adjacent to v. Constraint_Error is optionally raised if v is outside the base range of S. A zero result has the sign of X when S'Signed_Zeros is True. S'Floor S'Floor denotes a function with the following specification: function S'Floor (X : T) return T The function yields the value X, i.e., the largest (most positive) integral value less than or equal to X. When X is zero, the result has the sign of X; a zero result otherwise has a positive sign. S'Ceiling S'Ceiling denotes a function with the following specification: function S'Ceiling (X : T) return T The function yields the value X, i.e., the smallest (most negative) integral value greater than or equal to X. When X is zero, the result has the sign of X; a zero result otherwise has a negative sign when S'Signed_Zeros is True. S'Rounding S'Rounding denotes a function with the following specification: function S'Rounding (X : T) return T The function yields the integral value nearest to X, rounding away from zero if X lies exactly halfway between two integers. A zero result has the sign of X when S'Signed_Zeros is True. 39 S'Unbiased_Rounding 40 41 S'Unbiased_Rounding denotes a function with the following specification: function S'Unbiased_Rounding (X : T) return T The function yields the integral value nearest to X, rounding toward the even integer if X lies exactly halfway between two integers. A zero result has the sign of X when S'Signed_Zeros is True. A.5.3 Attributes of Floating Point Types 13 December 2012 420 Ada Reference Manual — 2012 Edition S'Machine_Rounding S'Machine_Rounding denotes a function with the following specification: function S'Machine_Rounding (X : T) return T The function yields the integral value nearest to X. If X lies exactly halfway between two integers, one of those integers is returned, but which of them is returned is unspecified. A zero result has the sign of X when S'Signed_Zeros is True. This function provides access to the rounding behavior which is most efficient on the target processor. S'Truncation S'Truncation denotes a function with the following specification: function S'Truncation (X : T) return T The function yields the value X when X is negative, and X otherwise. A zero result has the sign of X when S'Signed_Zeros is True. S'Remainder S'Remainder denotes a function with the following specification: function S'Remainder (X, Y : T) return T For nonzero Y, let v be the value X – n · Y, where n is the integer nearest to the exact value of X/Y; if |n – X/Y| = 1/2, then n is chosen to be even. If v is a machine number of the type T, the function yields v; otherwise, it yields zero. Constraint_Error is raised if Y is zero. A zero result has the sign of X when S'Signed_Zeros is True. S'Adjacent S'Adjacent denotes a function with the following specification: function S'Adjacent (X, Towards : T) return T If Towards = X, the function yields X; otherwise, it yields the machine number of the type T adjacent to X in the direction of Towards, if that machine number exists. If the result would be outside the base range of S, Constraint_Error is raised. When T'Signed_Zeros is True, a zero result has the sign of X. When Towards is zero, its sign has no bearing on the result. S'Copy_Sign S'Copy_Sign denotes a function with the following specification: function S'Copy_Sign (Value, Sign : T) return T If the value of Value is nonzero, the function yields a result whose magnitude is that of Value and whose sign is that of Sign; otherwise, it yields the value zero. Constraint_Error is optionally raised if the result is outside the base range of S. A zero result has the sign of Sign when S'Signed_Zeros is True. S'Leading_Part S'Leading_Part denotes a function with the following specification: function S'Leading_Part (X : T; Radix_Digits : universal_integer) return T Let v be the value T'Machine_Radixk–Radix_Digits, where k is the normalized exponent of X. The function yields the value • X/v · v, when X is nonnegative and Radix_Digits is positive; • X/v · v, when X is negative and Radix_Digits is positive. Constraint_Error is raised when Radix_Digits is zero or negative. A zero result, which can only occur when X is zero, has the sign of X. S'Machine S'Machine denotes a function with the following specification: 41.1/2 41.2/2 41.3/2 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 421 13 December 2012 Attributes of Floating Point Types A.5.3 61 62 63 64 Ada Reference Manual — 2012 Edition function S'Machine (X : T) return T If X is a machine number of the type T, the function yields X; otherwise, it yields the value obtained by rounding or truncating X to either one of the adjacent machine numbers of the type T. Constraint_Error is raised if rounding or truncating X to the precision of the machine numbers results in a value outside the base range of S. A zero result has the sign of X when S'Signed_Zeros is True. The following model-oriented attributes are defined for any subtype S of a floating point type T. S'Model_Mantissa If the Numerics Annex is not supported, this attribute yields an implementation defined value that is greater than or equal to d · log(10) / log(T'Machine_Radix) + 1, where d is the requested decimal precision of T, and less than or equal to the value of T'Machine_Mantissa. See G.2.2 for further requirements that apply to implementations supporting the Numerics Annex. The value of this attribute is of the type universal_integer. 65 S'Model_Emin If the Numerics Annex is not supported, this attribute yields an implementation defined value that is greater than or equal to the value of T'Machine_Emin. See G.2.2 for further requirements that apply to implementations supporting the Numerics Annex. The value of this attribute is of the type universal_integer. 66 S'Model_Epsilon Yields the value T'Machine_Radix1 – T'Model_Mantissa. The value of this attribute is of the type universal_real. 67 S'Model_Small Yields the value T'Machine_RadixT'Model_Emin – 1. The value of this attribute is of the type universal_real. S'Model S'Model denotes a function with the following specification: function S'Model (X : T) return T If the Numerics Annex is not supported, the meaning of this attribute is implementation defined; see G.2.2 for the definition that applies to implementations supporting the Numerics Annex. Yields the lower bound of the safe range (see 3.5.7) of the type T. If the Numerics Annex is not supported, the value of this attribute is implementation defined; see G.2.2 for the definition that applies to implementations supporting the Numerics Annex. The value of this attribute is of the type universal_real. 68 69 70 71 S'Safe_First 72 S'Safe_Last Yields the upper bound of the safe range (see 3.5.7) of the type T. If the Numerics Annex is not supported, the value of this attribute is implementation defined; see G.2.2 for the definition that applies to implementations supporting the Numerics Annex. The value of this attribute is of the type universal_real. A.5.4 Attributes of Fixed Point Types Static Semantics 1 The following representation-oriented attributes are defined for every subtype S of a fixed point type T. A.5.3 Attributes of Floating Point Types 13 December 2012 422 Ada Reference Manual — 2012 Edition S'Machine_Radix Yields the radix of the hardware representation of the type T. The value of this attribute is of the type universal_integer. S'Machine_Rounds Yields the value True if rounding is performed on inexact results of every predefined operation that yields a result of the type T; yields the value False otherwise. The value of this attribute is of the predefined type Boolean. S'Machine_Overflows Yields the value True if overflow and divide-by-zero are detected and reported by raising Constraint_Error for every predefined operation that yields a result of the type T; yields the value False otherwise. The value of this attribute is of the predefined type Boolean. A.6 Input-Output Input-output is provided through language-defined packages, each of which is a child of the root package Ada. The generic packages Sequential_IO and Direct_IO define input-output operations applicable to files containing elements of a given type. The generic package Storage_IO supports reading from and writing to an in-memory buffer. Additional operations for text input-output are supplied in the packages Text_IO, Wide_Text_IO, and Wide_Wide_Text_IO. Heterogeneous input-output is provided through the child packages Streams.Stream_IO and Text_IO.Text_Streams (see also 13.13). The package IO_Exceptions defines the exceptions needed by the predefined input-output packages. A.7 External Files and File Objects Static Semantics Values input from the external environment of the program, or output to the external environment, are considered to occupy external files. An external file can be anything external to the program that can produce a value to be read or receive a value to be written. An external file is identified by a string (the name). A second string (the form) gives further system-dependent characteristics that may be associated with the file, such as the physical organization or access rights. The conventions governing the interpretation of such strings shall be documented. Input and output operations are expressed as operations on objects of some file type, rather than directly in terms of the external files. In the remainder of this clause, the term file is always used to refer to a file object; the term external file is used otherwise. Input-output for sequential files of values of a single element type is defined by means of the generic package Sequential_IO. In order to define sequential input-output for a given element type, an instantiation of this generic unit, with the given type as actual parameter, has to be declared. The resulting package contains the declaration of a file type (called File_Type) for files of such elements, as well as the operations applicable to these files, such as the Open, Read, and Write procedures. Input-output for direct access files is likewise defined by a generic package called Direct_IO. Input-output in human-readable form is defined by the (nongeneric) packages Text_IO for Character and String data, for Wide_Text_IO Wide_Wide_Character and Wide_Wide_String data. Input-output for files containing streams of elements representing values of possibly different types is defined by means of the (nongeneric) package Streams.Stream_IO. and Wide_Wide_Text_IO and Wide_String data, for Wide_Character 2 3 4 1/2 1 2/3 3 4/2 423 13 December 2012 Attributes of Fixed Point Types A.5.4 Ada Reference Manual — 2012 Edition 5 6 7 8 9 10/2 11 12 13/2 14/3 15/2 16 1/2 2 Before input or output operations can be performed on a file, the file first has to be associated with an external file. While such an association is in effect, the file is said to be open, and otherwise the file is said to be closed. The language does not define what happens to external files after the completion of the main program and all the library tasks (in particular, if corresponding files have not been closed). The effect of input-output for access types is unspecified. An open file has a current mode, which is a value of one of the following enumeration types: type File_Mode is (In_File, Inout_File, Out_File); -- for Direct_IO These values correspond respectively to the cases where only reading, both reading and writing, or only writing are to be performed. type File_Mode is (In_File, Out_File, Append_File); -- for Sequential_IO, Text_IO, Wide_Text_IO, Wide_Wide_Text_IO, and Stream_IO These values correspond respectively to the cases where only reading, only writing, or only appending are to be performed. The mode of a file can be changed. Several file management operations are common to Sequential_IO, Direct_IO, Text_IO, Wide_Text_IO, and Wide_Wide_Text_IO. These operations are described in subclause A.8.2 for sequential and direct files. Any additional effects concerning text input-output are described in subclause A.10.2. The exceptions that can be propagated by the execution of an input-output subprogram are defined in the package IO_Exceptions; the situations in which they can be propagated are described following the description of the subprogram (and in subclause A.13). The exceptions Storage_Error and Program_Error may be propagated. (Program_Error can only be propagated due to errors made by the caller of the subprogram.) Finally, exceptions can be propagated in certain implementation-defined situations. NOTES 23 Each instantiation of the generic packages Sequential_IO and Direct_IO declares a different type File_Type. In the case of Text_IO, Wide_Text_IO, Wide_Wide_Text_IO, and Streams.Stream_IO, the corresponding type File_Type is unique. 24 A bidirectional device can often be modeled as two sequential files associated with the device, one of mode In_File, and one of mode Out_File. An implementation may restrict the number of files that may be associated with a given external file. A.8 Sequential and Direct Files Static Semantics Two kinds of access to external files are defined in this subclause: sequential access and direct access. The corresponding file types and the associated operations are provided by the generic packages Sequential_IO and Direct_IO. A file object to be used for sequential access is called a sequential file, and one to be used for direct access is called a direct file. Access to stream files is described in A.12.1. For sequential access, the file is viewed as a sequence of values that are transferred in the order of their appearance (as produced by the program or by the external environment). When the file is opened with mode In_File or Out_File, transfer starts respectively from or to the beginning of the file. When the file is opened with mode Append_File, transfer to the file starts after the last element of the file. A.7 External Files and File Objects 13 December 2012 424 Ada Reference Manual — 2012 Edition For direct access, the file is viewed as a set of elements occupying consecutive positions in linear order; a value can be transferred to or from an element of the file at any selected position. The position of an element is specified by its index, which is a number, greater than zero, of the implementation-defined integer type Count. The first element, if any, has index one; the index of the last element, if any, is called the current size; the current size is zero if there are no elements. The current size is a property of the external file. An open direct file has a current index, which is the index that will be used by the next read or write operation. When a direct file is opened, the current index is set to one. The current index of a direct file is a property of a file object, not of an external file. A.8.1 The Generic Package Sequential_IO The generic library package Sequential_IO has the following declaration: Static Semantics with Ada.IO_Exceptions; generic type Element_Type(<>) is private; package Ada.Sequential_IO is type File_Type is limited private; type File_Mode is (In_File, Out_File, Append_File); -- File management procedure Create(File : in out File_Type; Mode : in File_Mode := Out_File; Name : in String := ""; Form : in String := ""); procedure Open (File : in out File_Type; Mode : in File_Mode; Name : in String; Form : in String := ""); procedure Close (File : in out File_Type); procedure Delete(File : in out File_Type); procedure Reset (File : in out File_Type; Mode : in File_Mode); procedure Reset (File : in out File_Type); function Mode (File : in File_Type) return File_Mode; function Name (File : in File_Type) return String; function Form (File : in File_Type) return String; function Is_Open(File : in File_Type) return Boolean; -- Input and output operations procedure Read (File : in File_Type; Item : out Element_Type); procedure Write (File : in File_Type; Item : in Element_Type); function End_Of_File(File : in File_Type) return Boolean; -- Exceptions Status_Error : exception renames IO_Exceptions.Status_Error; Mode_Error : exception renames IO_Exceptions.Mode_Error; Name_Error : exception renames IO_Exceptions.Name_Error; Use_Error : exception renames IO_Exceptions.Use_Error; Device_Error : exception renames IO_Exceptions.Device_Error; End_Error : exception renames IO_Exceptions.End_Error; Data_Error : exception renames IO_Exceptions.Data_Error; private ... -- not specified by the language end Ada.Sequential_IO; 3 4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 425 13 December 2012 Sequential and Direct Files A.8 Ada Reference Manual — 2012 Edition 17/2 The type File_Type needs finalization (see 7.6) in every instantiation of Sequential_IO. 1 2 3/2 4 5 6 7 8 9 10 A.8.2 File Management Static Semantics The procedures and functions described in this subclause provide for the control of external files; their declarations are repeated in each of the packages for sequential, direct, text, and stream input-output. For text input-output, the procedures Create, Open, and Reset have additional effects described in subclause A.10.2. procedure Create(File : in out File_Type; Mode : in File_Mode := default_mode; Name : in String := ""; Form : in String := ""); Establishes a new external file, with the given name and form, and associates this external file with the given file. The given file is left open. The current mode of the given file is set to the given access mode. The default access mode is the mode Out_File for sequential, stream, and text input-output; it is the mode Inout_File for direct input-output. For direct access, the size of the created file is implementation defined. A null string for Name specifies an external file that is not accessible after the completion of the main program (a temporary file). A null string for Form specifies the use of the default options of the implementation for the external file. The exception Status_Error is propagated if the given file is already open. The exception Name_Error is propagated if the string given as Name does not allow the identification of an external file. The exception Use_Error is propagated if, for the specified mode, the external environment does not support creation of an external file with the given name (in the absence of Name_Error) and form. procedure Open(File : in out File_Type; Mode : in File_Mode; Name : in String; Form : in String := ""); Associates the given file with an existing external file having the given name and form, and sets the current mode of the given file to the given mode. The given file is left open. The exception Status_Error is propagated if the given file is already open. The exception Name_Error is propagated if the string given as Name does not allow the identification of an external file; in particular, this exception is propagated if no external file with the given name exists. The exception Use_Error is propagated if, for the specified mode, the external environment does not support opening for an external file with the given name (in the absence of Name_Error) and form. procedure Close(File : in out File_Type); Severs the association between the given file and its associated external file. The given file is left closed. In addition, for sequential files, if the file being closed has mode Out_File or Append_File, then the last element written since the most recent open or reset is the last element that can be read from the file. If no elements have been written and the file mode is Out_File, then the closed file is empty. If no elements have been written and the file mode is Append_File, then the closed file is unchanged. A.8.1 The Generic Package Sequential_IO 13 December 2012 426 Ada Reference Manual — 2012 Edition The exception Status_Error is propagated if the given file is not open. procedure Delete(File : in out File_Type); Deletes the external file associated with the given file. The given file is closed, and the external file ceases to exist. The exception Status_Error is propagated if the given file is not open. The exception Use_Error is propagated if deletion of the external file is not supported by the external environment. procedure Reset(File : in out File_Type; Mode : in File_Mode); procedure Reset(File : in out File_Type); Resets the given file so that reading from its elements can be restarted from the beginning of the external file (for modes In_File and Inout_File), and so that writing to its elements can be restarted at the beginning of the external file (for modes Out_File and Inout_File) or after the last element of the external file (for mode Append_File). In particular, for direct access this means that the current index is set to one. If a Mode parameter is supplied, the current mode of the given file is set to the given mode. In addition, for sequential files, if the given file has mode Out_File or Append_File when Reset is called, the last element written since the most recent open or reset is the last element that can be read from the external file. If no elements have been written and the file mode is Out_File, the reset file is empty. If no elements have been written and the file mode is Append_File, then the reset file is unchanged. The exception Status_Error is propagated if the file is not open. The exception Use_Error is propagated if the external environment does not support resetting for the external file and, also, if the external environment does not support resetting to the specified mode for the external file. function Mode(File : in File_Type) return File_Mode; Returns the current mode of the given file. The exception Status_Error is propagated if the file is not open. function Name(File : in File_Type) return String; 11 12 13 14 15 16/2 17 18 19 20 21 Returns a string which uniquely identifies the external file currently associated with the given file (and may thus be used in an Open operation). 22/2 The exception Status_Error is propagated if the given file is not open. The exception Use_Error is propagated if the associated external file is a temporary file that cannot be opened by any name. function Form(File : in File_Type) return String; Returns the form string for the external file currently associated with the given file. If an external environment allows alternative specifications of the form (for example, abbreviations using default options), the string returned by the function should correspond to a full specification (that is, it should indicate explicitly all options selected, including default options). The exception Status_Error is propagated if the given file is not open. function Is_Open(File : in File_Type) return Boolean; Returns True if the file is open (that is, if it is associated with an external file); otherwise, returns False. 23 24 25 26 27 28/3 427 13 December 2012 File Management A.8.2 Ada Reference Manual — 2012 Edition 29 An implementation may propagate Name_Error or Use_Error if an attempt is made to use an I/O feature that cannot be supported by the implementation due to limitations in the external environment. Any such restriction should be documented. Implementation Permissions A.8.3 Sequential Input-Output Operations Static Semantics The operations available for sequential input and output are described in this subclause. The exception Status_Error is propagated if any of these operations is attempted for a file that is not open. procedure Read(File : in File_Type; Item : out Element_Type); Operates on a file of mode In_File. Reads an element from the given file, and returns the value of this element in the Item parameter. The exception Mode_Error is propagated if the mode is not In_File. The exception End_Error is propagated if no more elements can be read from the given file. The exception Data_Error can be propagated if the element read cannot be interpreted as a value of the subtype Element_Type (see A.13, “Exceptions in Input-Output”). procedure Write(File : in File_Type; Item : in Element_Type); Operates on a file of mode Out_File or Append_File. Writes the value of Item to the given file. The exception Mode_Error is propagated if the mode is not Out_File or Append_File. The exception Use_Error is propagated if the capacity of the external file is exceeded. function End_Of_File(File : in File_Type) return Boolean; Operates on a file of mode In_File. Returns True if no more elements can be read from the given file; otherwise, returns False. The exception Mode_Error is propagated if the mode is not In_File. A.8.4 The Generic Package Direct_IO The generic library package Direct_IO has the following declaration: Static Semantics with Ada.IO_Exceptions; generic type Element_Type is private; package Ada.Direct_IO is type File_Type is limited private; type File_Mode is (In_File, Inout_File, Out_File); type Count is range 0 .. implementation-defined; subtype Positive_Count is Count range 1 .. Count'Last; -- File management procedure Create(File : in out File_Type; Mode : in File_Mode := Inout_File; Name : in String := ""; Form : in String := ""); 1 2 3 4 5 6 7 8 9/3 10 1 2 3 4 5 6 A.8.2 File Management 13 December 2012 428 Ada Reference Manual — 2012 Edition procedure Open (File : in out File_Type; Mode : in File_Mode; Name : in String; Form : in String := ""); procedure Close (File : in out File_Type); procedure Delete(File : in out File_Type); procedure Reset (File : in out File_Type; Mode : in File_Mode); procedure Reset (File : in out File_Type); function Mode (File : in File_Type) return File_Mode; function Name (File : in File_Type) return String; function Form (File : in File_Type) return String; function Is_Open(File : in File_Type) return Boolean; -- Input and output operations procedure Read (File : in File_Type; Item : out Element_Type; From : in Positive_Count); procedure Read (File : in File_Type; Item : out Element_Type); procedure Write(File : in File_Type; Item : in Element_Type; To : in Positive_Count); procedure Write(File : in File_Type; Item : in Element_Type); procedure Set_Index(File : in File_Type; To : in Positive_Count); function Index(File : in File_Type) return Positive_Count; function Size (File : in File_Type) return Count; function End_Of_File(File : in File_Type) return Boolean; -- Exceptions Status_Error : exception renames IO_Exceptions.Status_Error; Mode_Error : exception renames IO_Exceptions.Mode_Error; Name_Error : exception renames IO_Exceptions.Name_Error; Use_Error : exception renames IO_Exceptions.Use_Error; Device_Error : exception renames IO_Exceptions.Device_Error; End_Error : exception renames IO_Exceptions.End_Error; Data_Error : exception renames IO_Exceptions.Data_Error; private ... -- not specified by the language end Ada.Direct_IO; The type File_Type needs finalization (see 7.6) in every instantiation of Direct_IO. A.8.5 Direct Input-Output Operations Static Semantics The operations available for direct input and output are described in this subclause. The exception Status_Error is propagated if any of these operations is attempted for a file that is not open. procedure Read(File : in File_Type; Item : out Element_Type; From : in Positive_Count); procedure Read(File : in File_Type; Item : out Element_Type); Operates on a file of mode In_File or Inout_File. In the case of the first form, sets the current index of the given file to the index value given by the parameter From. Then (for both forms) returns, in the parameter Item, the value of the element whose position in the given file is specified by the current index of the file; finally, increases the current index by one. The exception Mode_Error is propagated if the mode of the given file is Out_File. The exception End_Error is propagated if the index to be used exceeds the size of the external file. The exception Data_Error can be propagated if the element read cannot be interpreted as a value of the subtype Element_Type (see A.13). 429 13 December 2012 The Generic Package Direct_IO A.8.4 7 8 9 10 11 12 13 14 15 16 17 18 19 20/2 1 2 3 4 Ada Reference Manual — 2012 Edition 5 6 7 8 9 10 11 12 13 14 15/3 16 17 1 2 3 4 5 6 7 procedure Write(File : in File_Type; Item : in Element_Type; To : in Positive_Count); procedure Write(File : in File_Type; Item : in Element_Type); Operates on a file of mode Inout_File or Out_File. In the case of the first form, sets the index of the given file to the index value given by the parameter To. Then (for both forms) gives the value of the parameter Item to the element whose position in the given file is specified by the current index of the file; finally, increases the current index by one. The exception Mode_Error is propagated if the mode of the given file is In_File. The exception Use_Error is propagated if the capacity of the external file is exceeded. procedure Set_Index(File : in File_Type; To : in Positive_Count); Operates on a file of any mode. Sets the current index of the given file to the given index value (which may exceed the current size of the file). function Index(File : in File_Type) return Positive_Count; Operates on a file of any mode. Returns the current index of the given file. function Size(File : in File_Type) return Count; Operates on a file of any mode. Returns the current size of the external file that is associated with the given file. function End_Of_File(File : in File_Type) return Boolean; Operates on a file of mode In_File or Inout_File. Returns True if the current index exceeds the size of the external file; otherwise, returns False. The exception Mode_Error is propagated if the mode of the given file is Out_File. NOTES 25 Append_File mode is not supported for the generic package Direct_IO. A.9 The Generic Package Storage_IO The generic package Storage_IO provides for reading from and writing to an in-memory buffer. This generic package supports the construction of user-defined input-output packages. The generic library package Storage_IO has the following declaration: Static Semantics with Ada.IO_Exceptions; with System.Storage_Elements; generic type Element_Type is private; package Ada.Storage_IO is pragma Preelaborate(Storage_IO); Buffer_Size : constant System.Storage_Elements.Storage_Count := implementation-defined; subtype Buffer_Type is System.Storage_Elements.Storage_Array(1..Buffer_Size); -- Input and output operations procedure Read (Buffer : in Buffer_Type; Item : out Element_Type); procedure Write(Buffer : out Buffer_Type; Item : in Element_Type); A.8.5 Direct Input-Output Operations 13 December 2012 430 Ada Reference Manual — 2012 Edition -- Exceptions Data_Error : exception renames IO_Exceptions.Data_Error; end Ada.Storage_IO; In each instance, the constant Buffer_Size has a value that is the size (in storage elements) of the buffer required to represent the content of an object of subtype Element_Type, including any implicit levels of indirection used by the implementation. The Read and Write procedures of Storage_IO correspond to the Read and Write procedures of Direct_IO (see A.8.4), but with the content of the Item parameter being read from or written into the specified Buffer, rather than an external file. 8 9 10 NOTES 26 A buffer used for Storage_IO holds only one element at a time; an external file used for Direct_IO holds a sequence of elements. 11 A.10 Text Input-Output Static Semantics This subclause describes the package Text_IO, which provides facilities for input and output in human- readable form. Each file is read or written sequentially, as a sequence of characters grouped into lines, and as a sequence of lines grouped into pages. The specification of the package is given below in subclause A.10.1. The facilities for file management given above, in subclauses A.8.2 and A.8.3, are available for text input- output. In place of Read and Write, however, there are procedures Get and Put that input values of suitable types from text files, and output values to them. These values are provided to the Put procedures, and returned by the Get procedures, in a parameter Item. Several overloaded procedures of these names exist, for different types of Item. These Get procedures analyze the input sequences of characters based on lexical elements (see Clause 2) and return the corresponding values; the Put procedures output the given values as appropriate lexical elements. Procedures Get and Put are also available that input and output individual characters treated as character values rather than as lexical elements. Related to character input are procedures to look ahead at the next character without reading it, and to read a character “immediately” without waiting for an end-of-line to signal availability. In addition to the procedures Get and Put for numeric and enumeration types of Item that operate on text files, analogous procedures are provided that read from and write to a parameter of type String. These procedures perform the same analysis and composition of character sequences as their counterparts which have a file parameter. For all Get and Put procedures that operate on text files, and for many other subprograms, there are forms with and without a file parameter. Each such Get procedure operates on an input file, and each such Put procedure operates on an output file. If no file is specified, a default input file or a default output file is used. At the beginning of program execution the default input and output files are the so-called standard input file and standard output file. These files are open, have respectively the current modes In_File and Out_File, and are associated with two implementation-defined external files. Procedures are provided to change the current default input file and the current default output file. At the beginning of program execution a default file for program-dependent error-related text output is the so-called standard error file. This file is open, has the current mode Out_File, and is associated with an implementation-defined external file. A procedure is provided to change the current default error file. 1/3 2/3 3 4 5 6 431 13 December 2012 The Generic Package Storage_IO A.9 Ada Reference Manual — 2012 Edition From a logical point of view, a text file is a sequence of pages, a page is a sequence of lines, and a line is a sequence of characters; the end of a line is marked by a line terminator; the end of a page is marked by the combination of a line terminator immediately followed by a page terminator; and the end of a file is marked by the combination of a line terminator immediately followed by a page terminator and then a file terminator. Terminators are generated during output; either by calls of procedures provided expressly for that purpose; or implicitly as part of other operations, for example, when a bounded line length, a bounded page length, or both, have been specified for a file. The actual nature of terminators is not defined by the language and hence depends on the implementation. Although terminators are recognized or generated by certain of the procedures that follow, they are not necessarily implemented as characters or as sequences of characters. Whether they are characters (and if so which ones) in any particular implementation need not concern a user who neither explicitly outputs nor explicitly inputs control characters. The effect of input (Get) or output (Put) of control characters (other than horizontal tabulation) is not specified by the language. The characters of a line are numbered, starting from one; the number of a character is called its column number. For a line terminator, a column number is also defined: it is one more than the number of characters in the line. The lines of a page, and the pages of a file, are similarly numbered. The current column number is the column number of the next character or line terminator to be transferred. The current line number is the number of the current line. The current page number is the number of the current page. These numbers are values of the subtype Positive_Count of the type Count (by convention, the value zero of the type Count is used to indicate special conditions). type Count is range 0 .. implementation-defined; subtype Positive_Count is Count range 1 .. Count'Last; For an output file or an append file, a maximum line length can be specified and a maximum page length can be specified. If a value to be output cannot fit on the current line, for a specified maximum line length, then a new line is automatically started before the value is output; if, further, this new line cannot fit on the current page, for a specified maximum page length, then a new page is automatically started before the value is output. Functions are provided to determine the maximum line length and the maximum page length. When a file is opened with mode Out_File or Append_File, both values are zero: by convention, this means that the line lengths and page lengths are unbounded. (Consequently, output consists of a single line if the subprograms for explicit control of line and page structure are not used.) The constant Unbounded is provided for this purpose. A.10.1 The Package Text_IO The library package Text_IO has the following declaration: Static Semantics with Ada.IO_Exceptions; package Ada.Text_IO is type File_Type is limited private; type File_Mode is (In_File, Out_File, Append_File); type Count is range 0 .. implementation-defined; subtype Positive_Count is Count range 1 .. Count'Last; Unbounded : constant Count := 0; -- line and page length subtype Field is Integer range 0 .. implementation-defined; subtype Number_Base is Integer range 2 .. 16; type Type_Set is (Lower_Case, Upper_Case); -- File Management 7 8 9 10 11 1 2 3 4 5 6 7 8 A.10 Text Input-Output 13 December 2012 432 Ada Reference Manual — 2012 Edition procedure Create (File : in out File_Type; Mode : in File_Mode := Out_File; Name : in String := ""; Form : in String := ""); procedure Open (File : in out File_Type; Mode : in File_Mode; Name : in String; Form : in String := ""); procedure Close (File : in out File_Type); procedure Delete (File : in out File_Type); procedure Reset (File : in out File_Type; Mode : in File_Mode); procedure Reset (File : in out File_Type); function Mode (File : in File_Type) return File_Mode; function Name (File : in File_Type) return String; function Form (File : in File_Type) return String; function Is_Open(File : in File_Type) return Boolean; -- Control of default input and output files procedure Set_Input (File : in File_Type); procedure Set_Output(File : in File_Type); procedure Set_Error (File : in File_Type); function Standard_Input return File_Type; function Standard_Output return File_Type; function Standard_Error return File_Type; function Current_Input return File_Type; function Current_Output return File_Type; function Current_Error return File_Type; type File_Access is access constant File_Type; function Standard_Input return File_Access; function Standard_Output return File_Access; function Standard_Error return File_Access; function Current_Input return File_Access; function Current_Output return File_Access; function Current_Error return File_Access; --Buffer control procedure Flush (File : in File_Type); procedure Flush; -- Specification of line and page lengths procedure Set_Line_Length(File : in File_Type; To : in Count); procedure Set_Line_Length(To : in Count); procedure Set_Page_Length(File : in File_Type; To : in Count); procedure Set_Page_Length(To : in Count); function Line_Length(File : in File_Type) return Count; function Line_Length return Count; function Page_Length(File : in File_Type) return Count; function Page_Length return Count; -- Column, Line, and Page Control procedure New_Line (File : in File_Type; Spacing : in Positive_Count := 1); procedure New_Line (Spacing : in Positive_Count := 1); procedure Skip_Line (File : in File_Type; Spacing : in Positive_Count := 1); procedure Skip_Line (Spacing : in Positive_Count := 1); function End_Of_Line(File : in File_Type) return Boolean; function End_Of_Line return Boolean; procedure New_Page (File : in File_Type); procedure New_Page; 9 10 11 12 13 14 15 16 17 18 19 20 21/1 22 23 24 25 26 27 28 29 30 31 433 13 December 2012 The Package Text_IO A.10.1 Ada Reference Manual — 2012 Edition 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 49.1/2 50 51 52 53 procedure Skip_Page (File : in File_Type); procedure Skip_Page; function End_Of_Page(File : in File_Type) return Boolean; function End_Of_Page return Boolean; function End_Of_File(File : in File_Type) return Boolean; function End_Of_File return Boolean; procedure Set_Col (File : in File_Type; To : in Positive_Count); procedure Set_Col (To : in Positive_Count); procedure Set_Line(File : in File_Type; To : in Positive_Count); procedure Set_Line(To : in Positive_Count); function Col (File : in File_Type) return Positive_Count; function Col return Positive_Count; function Line(File : in File_Type) return Positive_Count; function Line return Positive_Count; function Page(File : in File_Type) return Positive_Count; function Page return Positive_Count; -- Character Input-Output procedure Get(File : in File_Type; Item : out Character); procedure Get(Item : out Character); procedure Put(File : in File_Type; Item : in Character); procedure Put(Item : in Character); procedure Look_Ahead (File : in File_Type; Item : out Character; End_Of_Line : out Boolean); procedure Look_Ahead (Item : out Character; End_Of_Line : out Boolean); procedure Get_Immediate(File : in File_Type; Item : out Character); procedure Get_Immediate(Item : out Character); procedure Get_Immediate(File : in File_Type; Item : out Character; Available : out Boolean); procedure Get_Immediate(Item : out Character; Available : out Boolean); -- String Input-Output procedure Get(File : in File_Type; Item : out String); procedure Get(Item : out String); procedure Put(File : in File_Type; Item : in String); procedure Put(Item : in String); procedure Get_Line(File : in File_Type; Item : out String; Last : out Natural); procedure Get_Line(Item : out String; Last : out Natural); function Get_Line(File : in File_Type) return String; function Get_Line return String; procedure Put_Line(File : in File_Type; Item : in String); procedure Put_Line(Item : in String); -- Generic packages for Input-Output of Integer Types generic type Num is range <>; package Integer_IO is Default_Width : Field := Num'Width; Default_Base : Number_Base := 10; A.10.1 The Package Text_IO 13 December 2012 434 Ada Reference Manual — 2012 Edition procedure Get(File : in File_Type; Item : out Num; Width : in Field := 0); procedure Get(Item : out Num; Width : in Field := 0); procedure Put(File : in File_Type; Item : in Num; Width : in Field := Default_Width; Base : in Number_Base := Default_Base); procedure Put(Item : in Num; Width : in Field := Default_Width; Base : in Number_Base := Default_Base); procedure Get(From : in String; Item : out Num; Last : out Positive); procedure Put(To : out String; Item : in Num; Base : in Number_Base := Default_Base); end Integer_IO; generic type Num is mod <>; package Modular_IO is Default_Width : Field := Num'Width; Default_Base : Number_Base := 10; procedure Get(File : in File_Type; Item : out Num; Width : in Field := 0); procedure Get(Item : out Num; Width : in Field := 0); procedure Put(File : in File_Type; Item : in Num; Width : in Field := Default_Width; Base : in Number_Base := Default_Base); procedure Put(Item : in Num; Width : in Field := Default_Width; Base : in Number_Base := Default_Base); procedure Get(From : in String; Item : out Num; Last : out Positive); procedure Put(To : out String; Item : in Num; Base : in Number_Base := Default_Base); end Modular_IO; -- Generic packages for Input-Output of Real Types generic type Num is digits <>; package Float_IO is Default_Fore : Field := 2; Default_Aft : Field := Num'Digits-1; Default_Exp : Field := 3; procedure Get(File : in File_Type; Item : out Num; Width : in Field := 0); procedure Get(Item : out Num; Width : in Field := 0); 54 55 56 57 58 59 60 61 62 63 64 65 435 13 December 2012 The Package Text_IO A.10.1 66 67 68 69 70 71 72 73 74 75 Ada Reference Manual — 2012 Edition procedure Put(File : in File_Type; Item : in Num; Fore : in Field := Default_Fore; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); procedure Put(Item : in Num; Fore : in Field := Default_Fore; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); procedure Get(From : in String; Item : out Num; Last : out Positive); procedure Put(To : out String; Item : in Num; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); end Float_IO; generic type Num is delta <>; package Fixed_IO is Default_Fore : Field := Num'Fore; Default_Aft : Field := Num'Aft; Default_Exp : Field := 0; procedure Get(File : in File_Type; Item : out Num; Width : in Field := 0); procedure Get(Item : out Num; Width : in Field := 0); procedure Put(File : in File_Type; Item : in Num; Fore : in Field := Default_Fore; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); procedure Put(Item : in Num; Fore : in Field := Default_Fore; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); procedure Get(From : in String; Item : out Num; Last : out Positive); procedure Put(To : out String; Item : in Num; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); end Fixed_IO; generic type Num is delta <> digits <>; package Decimal_IO is Default_Fore : Field := Num'Fore; Default_Aft : Field := Num'Aft; Default_Exp : Field := 0; procedure Get(File : in File_Type; Item : out Num; Width : in Field := 0); procedure Get(Item : out Num; Width : in Field := 0); A.10.1 The Package Text_IO 13 December 2012 436 Ada Reference Manual — 2012 Edition procedure Put(File : in File_Type; Item : in Num; Fore : in Field := Default_Fore; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); procedure Put(Item : in Num; Fore : in Field := Default_Fore; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); procedure Get(From : in String; Item : out Num; Last : out Positive); procedure Put(To : out String; Item : in Num; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); end Decimal_IO; -- Generic package for Input-Output of Enumeration Types generic type Enum is (<>); package Enumeration_IO is Default_Width : Field := 0; Default_Setting : Type_Set := Upper_Case; procedure Get(File : in File_Type; Item : out Enum); procedure Get(Item : out Enum); procedure Put(File : in File_Type; Item : in Enum; Width : in Field := Default_Width; Set : in Type_Set := Default_Setting); procedure Put(Item : in Enum; Width : in Field := Default_Width; Set : in Type_Set := Default_Setting); procedure Get(From : in String; Item : out Enum; Last : out Positive); procedure Put(To : out String; Item : in Enum; Set : in Type_Set := Default_Setting); end Enumeration_IO; -- Exceptions Status_Error : exception renames IO_Exceptions.Status_Error; Mode_Error : exception renames IO_Exceptions.Mode_Error; Name_Error : exception renames IO_Exceptions.Name_Error; Use_Error : exception renames IO_Exceptions.Use_Error; Device_Error : exception renames IO_Exceptions.Device_Error; End_Error : exception renames IO_Exceptions.End_Error; Data_Error : exception renames IO_Exceptions.Data_Error; Layout_Error : exception renames IO_Exceptions.Layout_Error; private ... -- not specified by the language end Ada.Text_IO; 76 77 78 79 80 81 82 83 84 85 The type File_Type needs finalization (see 7.6). 86/2 A.10.2 Text File Management Static Semantics The only allowed file modes for text files are the modes In_File, Out_File, and Append_File. The subprograms given in subclause A.8.2 for the control of external files, and the function End_Of_File given 1 437 13 December 2012 The Package Text_IO A.10.1 Ada Reference Manual — 2012 Edition in subclause A.8.3 for sequential input-output, are also available for text files. There is also a version of End_Of_File that refers to the current default input file. For text files, the procedures have the following additional effects: • For the procedures Create and Open: After a file with mode Out_File or Append_File is opened, the page length and line length are unbounded (both have the conventional value zero). After a file (of any mode) is opened, the current column, current line, and current page numbers are set to one. If the mode is Append_File, it is implementation defined whether a page terminator will separate preexisting text in the file from the new text to be written. • For the procedure Close: If the file has the current mode Out_File or Append_File, has the effect of calling New_Page, unless the current page is already terminated; then outputs a file terminator. • For the procedure Reset: If the file has the current mode Out_File or Append_File, has the effect of calling New_Page, unless the current page is already terminated; then outputs a file terminator. The current column, line, and page numbers are set to one, and the line and page lengths to Unbounded. If the new mode is Append_File, it is implementation defined whether a page terminator will separate preexisting text in the file from the new text to be written. The exception Mode_Error is propagated by the procedure Reset upon an attempt to change the mode of a file that is the current default input file, the current default output file, or the current default error file. NOTES 27 An implementation can define the Form parameter of Create and Open to control effects including the following: • • the interpretation of line and column numbers for an interactive file, and the interpretation of text formats in a file created by a foreign program. A.10.3 Default Input, Output, and Error Files Static Semantics The following subprograms provide for the control of the particular default files that are used when a file parameter is omitted from a Get, Put, or other operation of text input-output described below, or when application-dependent error-related text is to be output. procedure Set_Input(File : in File_Type); Operates on a file of mode In_File. Sets the current default input file to File. The exception Status_Error is propagated if the given file is not open. The exception Mode_Error is propagated if the mode of the given file is not In_File. procedure Set_Output(File : in File_Type); procedure Set_Error (File : in File_Type); Each operates on a file of mode Out_File or Append_File. Set_Output sets the current default output file to File. Set_Error sets the current default error file to File. The exception Status_Error is propagated if the given file is not open. The exception Mode_Error is propagated if the mode of the given file is not Out_File or Append_File. function Standard_Input return File_Type; function Standard_Input return File_Access; Returns the standard input file (see A.10), or an access value designating the standard input file, respectively. 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 A.10.2 Text File Management 13 December 2012 438 Ada Reference Manual — 2012 Edition function Standard_Output return File_Type; function Standard_Output return File_Access; Returns the standard output file (see A.10) or an access value designating the standard output file, respectively. function Standard_Error return File_Type; function Standard_Error return File_Access; 9 10 11 Returns the standard error file (see A.10), or an access value designating the standard error file, respectively. 12/1 The Form strings implicitly associated with the opening of Standard_Input, Standard_Output, and Standard_Error at the start of program execution are implementation defined. function Current_Input return File_Type; function Current_Input return File_Access; Returns the current default input file, or an access value designating the current default input file, respectively. function Current_Output return File_Type; function Current_Output return File_Access; Returns the current default output file, or an access value designating the current default output file, respectively. function Current_Error return File_Type; function Current_Error return File_Access; Returns the current default error file, or an access value designating the current default error file, respectively. procedure Flush (File : in File_Type); procedure Flush; The effect of Flush is the same as the corresponding subprogram in Streams.Stream_IO (see A.12.1). If File is not explicitly specified, Current_Output is used. The execution of a program is erroneous if it invokes an operation on a current default input, default output, or default error file, and if the corresponding file object is closed or no longer exists. Erroneous Execution This paragraph was deleted. NOTES 28 The standard input, standard output, and standard error files cannot be opened, closed, reset, or deleted, because the parameter File of the corresponding procedures has the mode in out. 29 The standard input, standard output, and standard error files are different file objects, but not necessarily different external files. 13 14 15 16 17 18 19 20/1 21 22/1 23/1 24 25 A.10.4 Specification of Line and Page Lengths Static Semantics The subprograms described in this subclause are concerned with the line and page structure of a file of mode Out_File or Append_File. They operate either on the file given as the first parameter, or, in the absence of such a file parameter, on the current default output file. They provide for output of text with a specified maximum line length or page length. In these cases, line and page terminators are output 1 439 13 December 2012 Default Input, Output, and Error Files A.10.3 Ada Reference Manual — 2012 Edition implicitly and automatically when needed. When line and page lengths are unbounded (that is, when they have the conventional value zero), as in the case of a newly opened file, new lines and new pages are only started when explicitly called for. In all cases, the exception Status_Error is propagated if the file to be used is not open; the exception Mode_Error is propagated if the mode of the file is not Out_File or Append_File. procedure Set_Line_Length(File : in File_Type; To : in Count); procedure Set_Line_Length(To : in Count); Sets the maximum line length of the specified output or append file to the number of characters specified by To. The value zero for To specifies an unbounded line length. The exception Use_Error is propagated if the specified line length is inappropriate for the associated external file. procedure Set_Page_Length(File : in File_Type; To : in Count); procedure Set_Page_Length(To : in Count); Sets the maximum page length of the specified output or append file to the number of lines specified by To. The value zero for To specifies an unbounded page length. The exception Use_Error is propagated if the specified page length is inappropriate for the associated external file. function Line_Length(File : in File_Type) return Count; function Line_Length return Count; Returns the maximum line length currently set for the specified output or append file, or zero if the line length is unbounded. function Page_Length(File : in File_Type) return Count; function Page_Length return Count; Returns the maximum page length currently set for the specified output or append file, or zero if the page length is unbounded. A.10.5 Operations on Columns, Lines, and Pages Static Semantics The subprograms described in this subclause provide for explicit control of line and page structure; they operate either on the file given as the first parameter, or, in the absence of such a file parameter, on the appropriate (input or output) current default file. The exception Status_Error is propagated by any of these subprograms if the file to be used is not open. procedure New_Line(File : in File_Type; Spacing : in Positive_Count := 1); procedure New_Line(Spacing : in Positive_Count := 1); Operates on a file of mode Out_File or Append_File. For a Spacing of one: Outputs a line terminator and sets the current column number to one. Then increments the current line number by one, except in the case that the current line number is already greater than or equal to the maximum page length, for a bounded page length; in that case a page terminator is output, the current page number is incremented by one, and the current line number is set to one. For a Spacing greater than one, the above actions are performed Spacing times. 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 A.10.4 Specification of Line and Page Lengths 13 December 2012 440 Ada Reference Manual — 2012 Edition The exception Mode_Error is propagated if the mode is not Out_File or Append_File. procedure Skip_Line(File : in File_Type; Spacing : in Positive_Count := 1); procedure Skip_Line(Spacing : in Positive_Count := 1); Operates on a file of mode In_File. For a Spacing of one: Reads and discards all characters until a line terminator has been read, and then sets the current column number to one. If the line terminator is not immediately followed by a page terminator, the current line number is incremented by one. Otherwise, if the line terminator is immediately followed by a page terminator, then the page terminator is skipped, the current page number is incremented by one, and the current line number is set to one. For a Spacing greater than one, the above actions are performed Spacing times. The exception Mode_Error is propagated if the mode is not In_File. The exception End_Error is propagated if an attempt is made to read a file terminator. function End_Of_Line(File : in File_Type) return Boolean; function End_Of_Line return Boolean; 6 7 8 9 10 11 12 Operates on a file of mode In_File. Returns True if a line terminator or a file terminator is next; otherwise, returns False. 13/3 The exception Mode_Error is propagated if the mode is not In_File. procedure New_Page(File : in File_Type); procedure New_Page; Operates on a file of mode Out_File or Append_File. Outputs a line terminator if the current line is not terminated, or if the current page is empty (that is, if the current column and line numbers are both equal to one). Then outputs a page terminator, which terminates the current page. Adds one to the current page number and sets the current column and line numbers to one. The exception Mode_Error is propagated if the mode is not Out_File or Append_File. procedure Skip_Page(File : in File_Type); procedure Skip_Page; Operates on a file of mode In_File. Reads and discards all characters and line terminators until a page terminator has been read. Then adds one to the current page number, and sets the current column and line numbers to one. The exception Mode_Error is propagated if the mode is not In_File. The exception End_Error is propagated if an attempt is made to read a file terminator. function End_Of_Page(File : in File_Type) return Boolean; function End_Of_Page return Boolean; Operates on a file of mode In_File. Returns True if the combination of a line terminator and a page terminator is next, or if a file terminator is next; otherwise, returns False. The exception Mode_Error is propagated if the mode is not In_File. function End_Of_File(File : in File_Type) return Boolean; function End_Of_File return Boolean; Operates on a file of mode In_File. Returns True if a file terminator is next, or if the combination of a line, a page, and a file terminator is next; otherwise, returns False. 14 15 16 17 18 19 20 21 22/3 23 24 25/3 441 13 December 2012 Operations on Columns, Lines, and Pages A.10.5 Ada Reference Manual — 2012 Edition The exception Mode_Error is propagated if the mode is not In_File. The following subprograms provide for the control of the current position of reading or writing in a file. In all cases, the default file is the current output file. procedure Set_Col(File : in File_Type; To : in Positive_Count); procedure Set_Col(To : in Positive_Count); If the file mode is Out_File or Append_File: • If the value specified by To is greater than the current column number, outputs spaces, adding one to the current column number after each space, until the current column number equals the specified value. If the value specified by To is equal to the current column number, there is no effect. If the value specified by To is less than the current column number, has the effect of calling New_Line (with a spacing of one), then outputs (To – 1) spaces, and sets the current column number to the specified value. • The exception Layout_Error is propagated if the value specified by To exceeds Line_Length when the line length is bounded (that is, when it does not have the conventional value zero). If the file mode is In_File: • Reads (and discards) individual characters, line terminators, and page terminators, until the next character to be read has a column number that equals the value specified by To; there is no effect if the current column number already equals this value. Each transfer of a character or terminator maintains the current column, line, and page numbers in the same way as a Get procedure (see A.10.6). (Short lines will be skipped until a line is reached that has a character at the specified column position.) • The exception End_Error is propagated if an attempt is made to read a file terminator. procedure Set_Line(File : in File_Type; To : in Positive_Count); procedure Set_Line(To : in Positive_Count); If the file mode is Out_File or Append_File: • If the value specified by To is greater than the current line number, has the effect of repeatedly calling New_Line (with a spacing of one), until the current line number equals the specified value. If the value specified by To is equal to the current line number, there is no effect. If the value specified by To is less than the current line number, has the effect of calling New_Page followed, if To is greater than 1, by a call of New_Line with a spacing equal to (To – 1). • The exception Layout_Error is propagated if the value specified by To exceeds Page_Length when the page length is bounded (that is, when it does not have the conventional value zero). If the mode is In_File: • Has the effect of repeatedly calling Skip_Line (with a spacing of one), until the current line number equals the value specified by To; there is no effect if the current line number already equals this value. (Short pages will be skipped until a page is reached that has a line at the specified line position.) • The exception End_Error is propagated if an attempt is made to read a file terminator. function Col(File : in File_Type) return Positive_Count; function Col return Positive_Count; Returns the current column number. 26 27 28 29 30 31 32 33 34 35 36 37/3 38 39 40 41 42 43 A.10.5 Operations on Columns, Lines, and Pages 13 December 2012 442 Ada Reference Manual — 2012 Edition The exception Layout_Error is propagated if this number exceeds Count'Last. function Line(File : in File_Type) return Positive_Count; function Line return Positive_Count; Returns the current line number. The exception Layout_Error is propagated if this number exceeds Count'Last. function Page(File : in File_Type) return Positive_Count; function Page return Positive_Count; Returns the current page number. The exception Layout_Error is propagated if this number exceeds Count'Last. The column number, line number, or page number are allowed to exceed Count'Last (as a consequence of the input or output of sufficiently many characters, lines, or pages). These events do not cause any exception to be propagated. However, a call of Col, Line, or Page propagates the exception Layout_Error if the corresponding number exceeds Count'Last. NOTES 30 A page terminator is always skipped whenever the preceding line terminator is skipped. An implementation may represent the combination of these terminators by a single character, provided that it is properly recognized on input. A.10.6 Get and Put Procedures Static Semantics The procedures Get and Put for items of the type Character, String, numeric types, and enumeration types are described in subsequent subclauses. Features of these procedures that are common to most of these types are described in this subclause. The Get and Put procedures for items of type Character and String deal with individual character values; the Get and Put procedures for numeric and enumeration types treat the items as lexical elements. All procedures Get and Put have forms with a file parameter, written first. Where this parameter is omitted, the appropriate (input or output) current default file is understood to be specified. Each procedure Get operates on a file of mode In_File. Each procedure Put operates on a file of mode Out_File or Append_File. All procedures Get and Put maintain the current column, line, and page numbers of the specified file: the effect of each of these procedures upon these numbers is the result of the effects of individual transfers of characters and of individual output or skipping of terminators. Each transfer of a character adds one to the current column number. Each output of a line terminator sets the current column number to one and adds one to the current line number. Each output of a page terminator sets the current column and line numbers to one and adds one to the current page number. For input, each skipping of a line terminator sets the current column number to one and adds one to the current line number; each skipping of a page terminator sets the current column and line numbers to one and adds one to the current page number. Similar considerations apply to the procedures Get_Line, Put_Line, and Set_Col. Several Get and Put procedures, for numeric and enumeration types, have format parameters which specify field lengths; these parameters are of the nonnegative subtype Field of the type Integer. Input-output of enumeration values uses the syntax of the corresponding lexical elements. Any Get procedure for an enumeration type begins by skipping any leading blanks, or line or page terminators. A blank is defined as a space or a horizontal tabulation character. Next, characters are input only so long as 443 13 December 2012 Operations on Columns, Lines, and Pages A.10.5 44 45 46 47 48 49 50 51 52 1 2 3 4 5/2 Ada Reference Manual — 2012 Edition the sequence input is an initial sequence of an identifier or of a character literal (in particular, input ceases when a line terminator is encountered). The character or line terminator that causes input to cease remains available for subsequent input. For a numeric type, the Get procedures have a format parameter called Width. If the value given for this parameter is zero, the Get procedure proceeds in the same manner as for enumeration types, but using the syntax of numeric literals instead of that of enumeration literals. If a nonzero value is given, then exactly Width characters are input, or the characters up to a line terminator, whichever comes first; any skipped leading blanks are included in the count. The syntax used for numeric literals is an extended syntax that allows a leading sign (but no intervening blanks, or line or page terminators) and that also allows (for real types) an integer literal as well as forms that have digits only before the point or only after the point. Any Put procedure, for an item of a numeric or an enumeration type, outputs the value of the item as a numeric literal, identifier, or character literal, as appropriate. This is preceded by leading spaces if required by the format parameters Width or Fore (as described in later subclauses), and then a minus sign for a negative value; for an enumeration type, the spaces follow instead of leading. The format given for a Put procedure is overridden if it is insufficiently wide, by using the minimum needed width. Two further cases arise for Put procedures for numeric and enumeration types, if the line length of the specified output file is bounded (that is, if it does not have the conventional value zero). If the number of characters to be output does not exceed the maximum line length, but is such that they cannot fit on the current line, starting from the current column, then (in effect) New_Line is called (with a spacing of one) before output of the item. Otherwise, if the number of characters exceeds the maximum line length, then the exception Layout_Error is propagated and nothing is output. The exception Status_Error is propagated by any of the procedures Get, Get_Line, Put, and Put_Line if the file to be used is not open. The exception Mode_Error is propagated by the procedures Get and Get_Line if the mode of the file to be used is not In_File; and by the procedures Put and Put_Line, if the mode is not Out_File or Append_File. The exception End_Error is propagated by a Get procedure if an attempt is made to skip a file terminator. The exception Data_Error is propagated by a Get procedure if the sequence finally input is not a lexical element corresponding to the type, in particular if no characters were input; for this test, leading blanks are ignored; for an item of a numeric type, when a sign is input, this rule applies to the succeeding numeric literal. The exception Layout_Error is propagated by a Put procedure that outputs to a parameter of type String, if the length of the actual string is insufficient for the output of the item. In the examples, here and in subclauses A.10.8 and A.10.9, the string quotes and the lower case letter b are not transferred: they are shown only to reveal the layout and spaces. Examples N : Integer; ... Get(N); -- Characters at input Sequence input Value of N -- bb–12535b -- bb12_535e1b -- bb12_535e; –12535 12_535e1 12_535e –12535 125350 (none) Data_Error raised Example of overridden width parameter: Put(Item => -23, Width => 2); -- "–23" 6 7 8 9 10 11 12 13 14 15 A.10.6 Get and Put Procedures 13 December 2012 444 Ada Reference Manual — 2012 Edition A.10.7 Input-Output of Characters and Strings For an item of type Character the following procedures are provided: procedure Get(File : in File_Type; Item : out Character); procedure Get(Item : out Character); Static Semantics After skipping any line terminators and any page terminators, reads the next character from the specified input file and returns the value of this character in the out parameter Item. The exception End_Error is propagated if an attempt is made to skip a file terminator. procedure Put(File : in File_Type; Item : in Character); procedure Put(Item : in Character); If the line length of the specified output file is bounded (that is, does not have the conventional value zero), and the current column number exceeds it, has the effect of calling New_Line with a spacing of one. Then, or otherwise, outputs the given character to the file. procedure Look_Ahead (File : in File_Type; Item : out Character; End_Of_Line : out Boolean); procedure Look_Ahead (Item : out Character; End_Of_Line : out Boolean); Status_Error is propagated if the file is not open. Mode_Error is propagated if the mode of the file is not In_File. Sets End_Of_Line to True if at end of line, including if at end of page or at end of file; in each of these cases the value of Item is not specified. Otherwise, End_Of_Line is set to False and Item is set to the next character (without consuming it) from the file. procedure Get_Immediate(File : in File_Type; Item : out Character); procedure Get_Immediate(Item : out Character); Reads the next character, either control or graphic, from the specified File or the default input file. Status_Error is propagated if the file is not open. Mode_Error is propagated if the mode of the file is not In_File. End_Error is propagated if at the end of the file. The current column, line and page numbers for the file are not affected. procedure Get_Immediate(File : in File_Type; Item : out Character; Available : out Boolean); procedure Get_Immediate(Item : out Character; Available : out Boolean); If a character, either control or graphic, is available from the specified File or the default input file, then the character is read; Available is True and Item contains the value of this character. If a character is not available, then Available is False and the value of Item is not specified. Status_Error is propagated if the file is not open. Mode_Error is propagated if the mode of the file is not In_File. End_Error is propagated if at the end of the file. The current column, line and page numbers for the file are not affected. For an item of type String the following subprograms are provided: 1 2 3 4 5 6 7 8/3 9 10/3 11 12/3 13/2 445 13 December 2012 Input-Output of Characters and Strings A.10.7 Ada Reference Manual — 2012 Edition 14 15 16 17 17.1/2 17.2/2 17.3/2 18 19 20 21 22 23 24 procedure Get(File : in File_Type; Item : out String); procedure Get(Item : out String); Determines the length of the given string and attempts that number of Get operations for successive characters of the string (in particular, no operation is performed if the string is null). procedure Put(File : in File_Type; Item : in String); procedure Put(Item : in String); Determines the length of the given string and attempts that number of Put operations for successive characters of the string (in particular, no operation is performed if the string is null). function Get_Line(File : in File_Type) return String; function Get_Line return String; Returns a result string constructed by reading successive characters from the specified input file, and assigning them to successive characters of the result string. The result string has a lower bound of 1 and an upper bound of the number of characters read. Reading stops when the end of the line is met; Skip_Line is then (in effect) called with a spacing of 1. Constraint_Error is raised if the length of the line exceeds Positive'Last; in this case, the line number and page number are unchanged, and the column number is unspecified but no less than it was before the call. The exception End_Error is propagated if an attempt is made to skip a file terminator. procedure Get_Line(File : in File_Type; Item : out String; Last : out Natural); procedure Get_Line(Item : out String; Last : out Natural); Reads successive characters from the specified input file and assigns them to successive characters of the specified string. Reading stops if the end of the string is met. Reading also stops if the end of the line is met before meeting the end of the string; in this case Skip_Line is (in effect) called with a spacing of 1. The values of characters not assigned are not specified. If characters are read, returns in Last the index value such that Item(Last) is the last character assigned (the index of the first character assigned is Item'First). If no characters are read, returns in Last an index value that is one less than Item'First. The exception End_Error is propagated if an attempt is made to skip a file terminator. procedure Put_Line(File : in File_Type; Item : in String); procedure Put_Line(Item : in String); Calls the procedure Put for the given string, and then the procedure New_Line with a spacing of one. Implementation Advice The Get_Immediate procedures should be implemented with unbuffered input. For a device such as a keyboard, input should be “available” if a key has already been typed, whereas for a disk file, input should always be available except at end of file. For a file associated with a keyboard-like device, any line-editing features of the underlying operating system should be disabled during the execution of Get_Immediate. NOTES 31 Get_Immediate can be used to read a single key from the keyboard “immediately”; that is, without waiting for an end of line. In a call of Get_Immediate without the parameter Available, the caller will wait until a character is available. A.10.7 Input-Output of Characters and Strings 13 December 2012 446 Ada Reference Manual — 2012 Edition 32 In a literal string parameter of Put, the enclosing string bracket characters are not output. Each doubled string bracket character in the enclosed string is output as a single string bracket character, as a consequence of the rule for string literals (see 2.6). 33 A string read by Get or written by Put can extend over several lines. An implementation is allowed to assume that certain external files do not contain page terminators, in which case Get_Line and Skip_Line can return as soon as a line terminator is read. A.10.8 Input-Output for Integer Types Static Semantics The following procedures are defined in the generic packages Integer_IO and Modular_IO, which have to be instantiated for the appropriate signed integer or modular type respectively (indicated by Num in the specifications). Values are output as decimal or based literals, without low line characters or exponent, and, for Integer_IO, preceded by a minus sign if negative. The format (which includes any leading spaces and minus sign) can be specified by an optional field width parameter. Values of widths of fields in output formats are of the nonnegative integer subtype Field. Values of bases are of the integer subtype Number_Base. subtype Number_Base is Integer range 2 .. 16; The default field width and base to be used by output procedures are defined by the following variables that are declared in the generic packages Integer_IO and Modular_IO: Default_Width : Field := Num'Width; Default_Base : Number_Base := 10; The following procedures are provided: procedure Get(File : in File_Type; Item : out Num; Width : in Field := 0); procedure Get(Item : out Num; Width : in Field := 0); If the value of the parameter Width is zero, skips any leading blanks, line terminators, or page terminators, then reads a plus sign if present or (for a signed type only) a minus sign if present, then reads the longest possible sequence of characters matching the syntax of a numeric literal without a point. If a nonzero value of Width is supplied, then exactly Width characters are input, or the characters (possibly none) up to a line terminator, whichever comes first; any skipped leading blanks are included in the count. Returns, in the parameter Item, the value of type Num that corresponds to the sequence input. The exception Data_Error is propagated if the sequence of characters read does not form a legal integer literal or if the value obtained is not of the subtype Num. procedure Put(File : in File_Type; Item : in Num; Width : in Field := Default_Width; Base : in Number_Base := Default_Base); procedure Put(Item : in Num; Width : in Field := Default_Width; Base : in Number_Base := Default_Base); 25 26 1 2 3 4 5 6 7 8 9 10/3 11 Outputs the value of the parameter Item as an integer literal, with no low lines, no exponent, and no leading zeros (but a single zero for the value zero), and a preceding minus sign for a negative value. 12 447 13 December 2012 Input-Output of Characters and Strings A.10.7 Ada Reference Manual — 2012 Edition 13 14 15 16 17 18 19 20 21 22 23 If the resulting sequence of characters to be output has fewer than Width characters, then leading spaces are first output to make up the difference. Uses the syntax for decimal literal if the parameter Base has the value ten (either explicitly or through Default_Base); otherwise, uses the syntax for based literal, with any letters in upper case. procedure Get(From : in String; Item : out Num; Last : out Positive); Reads an integer value from the beginning of the given string, following the same rules as the Get procedure that reads an integer value from a file, but treating the end of the string as a file terminator. Returns, in the parameter Item, the value of type Num that corresponds to the sequence input. Returns in Last the index value such that From(Last) is the last character read. The exception Data_Error is propagated if the sequence input does not have the required syntax or if the value obtained is not of the subtype Num. procedure Put(To : out String; Item : in Num; Base : in Number_Base := Default_Base); Outputs the value of the parameter Item to the given string, following the same rule as for output to a file, using the length of the given string as the value for Width. Integer_Text_IO is a library package that is a nongeneric equivalent to Text_IO.Integer_IO for the predefined type Integer: with Ada.Text_IO; package Ada.Integer_Text_IO is new Ada.Text_IO.Integer_IO(Integer); For each predefined signed integer type, a nongeneric equivalent to Text_IO.Integer_IO is provided, with names such as Ada.Long_Integer_Text_IO. The nongeneric equivalent packages may, but need not, be actual instantiations of the generic package for the appropriate predefined type. Implementation Permissions Paragraphs 24 and 25 were deleted. Examples 26/3 27 subtype Byte_Int is Integer range -127 .. 127; package Int_IO is new Integer_IO(Byte_Int); use Int_IO; -- default format used at instantiation, -- Default_Width = 4, Default_Base = 10 Put(126); -- "b126" Put(-126, 7); -- "bbb–126" Put(126, Width => 13, Base => 2); -- "bbb2#1111110#" A.10.9 Input-Output for Real Types Static Semantics 1 The following procedures are defined in the generic packages Float_IO, Fixed_IO, and Decimal_IO, which have to be instantiated for the appropriate floating point, ordinary fixed point, or decimal fixed point type respectively (indicated by Num in the specifications). A.10.8 Input-Output for Integer Types 13 December 2012 448 Values are output as decimal literals without low line characters. The format of each value output consists of a Fore field, a decimal point, an Aft field, and (if a nonzero Exp parameter is supplied) the letter E and an Exp field. The two possible formats thus correspond to: Ada Reference Manual — 2012 Edition Fore . Aft and to: Fore . Aft E Exp without any spaces between these fields. The Fore field may include leading spaces, and a minus sign for negative values. The Aft field includes only decimal digits (possibly with trailing zeros). The Exp field includes the sign (plus or minus) and the exponent (possibly with leading zeros). For floating point types, the default lengths of these fields are defined by the following variables that are declared in the generic package Float_IO: Default_Fore : Field := 2; Default_Aft : Field := Num'Digits-1; Default_Exp : Field := 3; For ordinary or decimal fixed point types, the default lengths of these fields are defined by the following variables that are declared in the generic packages Fixed_IO and Decimal_IO, respectively: Default_Fore : Field := Num'Fore; Default_Aft : Field := Num'Aft; Default_Exp : Field := 0; The following procedures are provided: procedure Get(File : in File_Type; Item : out Num; Width : in Field := 0); procedure Get(Item : out Num; Width : in Field := 0); If the value of the parameter Width is zero, skips any leading blanks, line terminators, or page terminators, then reads the longest possible sequence of characters matching the syntax of any of the following (see 2.4): • [+|–]numeric_literal • [+|–]numeral.[exponent] • [+|–].numeral[exponent] • [+|–]base#based_numeral.#[exponent] • [+|–]base#.based_numeral#[exponent] If a nonzero value of Width is supplied, then exactly Width characters are input, or the characters (possibly none) up to a line terminator, whichever comes first; any skipped leading blanks are included in the count. Returns in the parameter Item the value of type Num that corresponds to the sequence input, preserving the sign (positive if none has been specified) of a zero value if Num is a floating point type and Num'Signed_Zeros is True. The exception Data_Error is propagated if the sequence input does not have the required syntax or if the value obtained is not of the subtype Num. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 449 13 December 2012 Input-Output for Real Types A.10.9 22 23 24 25 26 27 28 29 30 31 32 33 Ada Reference Manual — 2012 Edition procedure Put(File : in File_Type; Item : in Num; Fore : in Field := Default_Fore; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); procedure Put(Item : in Num; Fore : in Field := Default_Fore; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); Outputs the value of the parameter Item as a decimal literal with the format defined by Fore, Aft and Exp. If the value is negative, or if Num is a floating point type where Num'Signed_Zeros is True and the value is a negatively signed zero, then a minus sign is included in the integer part. If Exp has the value zero, then the integer part to be output has as many digits as are needed to represent the integer part of the value of Item, overriding Fore if necessary, or consists of the digit zero if the value of Item has no integer part. If Exp has a value greater than zero, then the integer part to be output has a single digit, which is nonzero except for the value 0.0 of Item. In both cases, however, if the integer part to be output has fewer than Fore characters, including any minus sign, then leading spaces are first output to make up the difference. The number of digits of the fractional part is given by Aft, or is one if Aft equals zero. The value is rounded; a value of exactly one half in the last place is rounded away from zero. If Exp has the value zero, there is no exponent part. If Exp has a value greater than zero, then the exponent part to be output has as many digits as are needed to represent the exponent part of the value of Item (for which a single digit integer part is used), and includes an initial sign (plus or minus). If the exponent part to be output has fewer than Exp characters, including the sign, then leading zeros precede the digits, to make up the difference. For the value 0.0 of Item, the exponent has the value zero. procedure Get(From : in String; Item : out Num; Last : out Positive); Reads a real value from the beginning of the given string, following the same rule as the Get procedure that reads a real value from a file, but treating the end of the string as a file terminator. Returns, in the parameter Item, the value of type Num that corresponds to the sequence input. Returns in Last the index value such that From(Last) is the last character read. The exception Data_Error is propagated if the sequence input does not have the required syntax, or if the value obtained is not of the subtype Num. procedure Put(To : out String; Item : in Num; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); Outputs the value of the parameter Item to the given string, following the same rule as for output to a file, using a value for Fore such that the sequence of characters output exactly fills the string, including any leading spaces. Float_Text_IO is a library package that is a nongeneric equivalent to Text_IO.Float_IO for the predefined type Float: with Ada.Text_IO; package Ada.Float_Text_IO is new Ada.Text_IO.Float_IO(Float); A.10.9 Input-Output for Real Types 13 December 2012 450 Ada Reference Manual — 2012 Edition For each predefined floating point type, a nongeneric equivalent to Text_IO.Float_IO is provided, with names such as Ada.Long_Float_Text_IO. Implementation Permissions An implementation may extend Get and Put for floating point types to support special values such as infinities and NaNs. The implementation of Put need not produce an output value with greater accuracy than is supported for the base subtype. The additional accuracy, if any, of the value produced by Put when the number of requested digits in the integer and fractional parts exceeds the required accuracy is implementation defined. The nongeneric equivalent packages may, but need not, be actual instantiations of the generic package for the appropriate predefined type. NOTES 34 For an item with a positive value, if output to a string exactly fills the string without leading spaces, then output of the corresponding negative value will propagate Layout_Error. 35 The rules for the Value attribute (see 3.5) and the rules for Get are based on the same set of formats. Examples This paragraph was deleted. package Real_IO is new Float_IO(Real); use Real_IO; -- default format used at instantiation, Default_Exp = 3 X : Real := -123.4567; -- digits 8 (see 3.5.7) Put(X); -- default format "–1.2345670E+02" Put(X, Fore => 5, Aft => 3, Exp => 2); -- "bbb–1.235E+2" Put(X, 5, 3, 0); -- "b–123.457" A.10.10 Input-Output for Enumeration Types Static Semantics The following procedures are defined in the generic package Enumeration_IO, which has to be instantiated for the appropriate enumeration type (indicated by Enum in the specification). Values are output using either upper or lower case letters for identifiers. This is specified by the parameter Set, which is of the enumeration type Type_Set. type Type_Set is (Lower_Case, Upper_Case); The format (which includes any trailing spaces) can be specified by an optional field width parameter. The default field width and letter case are defined by the following variables that are declared in the generic package Enumeration_IO: Default_Width : Field := 0; Default_Setting : Type_Set := Upper_Case; The following procedures are provided: procedure Get(File : in File_Type; Item : out Enum); procedure Get(Item : out Enum); After skipping any leading blanks, line terminators, or page terminators, reads an identifier according to the syntax of this lexical element (lower and upper case being considered equivalent), or a character literal according to the syntax of this lexical element (including the 451 13 December 2012 Input-Output for Real Types A.10.9 34 35 36 37 38 39 40/1 41 42 43 1 2 3 4 5 6 7 8 Ada Reference Manual — 2012 Edition apostrophes). Returns, in the parameter Item, the value of type Enum that corresponds to the sequence input. The exception Data_Error is propagated if the sequence input does not have the required syntax, or if the identifier or character literal does not correspond to a value of the subtype Enum. procedure Put(File : in File_Type; Item : in Enum; Width : in Field := Default_Width; Set : in Type_Set := Default_Setting); procedure Put(Item : in Enum; Width : in Field := Default_Width; Set : in Type_Set := Default_Setting); Outputs the value of the parameter Item as an enumeration literal (either an identifier or a character literal). The optional parameter Set indicates whether lower case or upper case is used for identifiers; it has no effect for character literals. If the sequence of characters produced has fewer than Width characters, then trailing spaces are finally output to make up the difference. If Enum is a character type, the sequence of characters produced is as for Enum'Image(Item), as modified by the Width and Set parameters. procedure Get(From : in String; Item : out Enum; Last : out Positive); Reads an enumeration value from the beginning of the given string, following the same rule as the Get procedure that reads an enumeration value from a file, but treating the end of the string as a file terminator. Returns, in the parameter Item, the value of type Enum that corresponds to the sequence input. Returns in Last the index value such that From(Last) is the last character read. The exception Data_Error is propagated if the sequence input does not have the required syntax, or if the identifier or character literal does not correspond to a value of the subtype Enum. procedure Put(To : out String; Item : in Enum; Set : in Type_Set := Default_Setting); Outputs the value of the parameter Item to the given string, following the same rule as for output to a file, using the length of the given string as the value for Width. 9 10 11 12 13 14 15 16 17/1 Although the specification of the generic package Enumeration_IO would allow instantiation for an integer type, this is not the intended purpose of this generic package, and the effect of such instantiations is not defined by the language. 18 19 20 21 NOTES 36 There is a difference between Put defined for characters, and for enumeration values. Thus Ada.Text_IO.Put('A'); -- outputs the character A package Char_IO is new Ada.Text_IO.Enumeration_IO(Character); Char_IO.Put('A'); -- outputs the character 'A', between apostrophes 37 The type Boolean is an enumeration type, hence Enumeration_IO can be instantiated for this type. A.10.11 Input-Output for Bounded Strings 1/2 The package Text_IO.Bounded_IO provides input-output in human-readable form for Bounded_Strings. A.10.10 Input-Output for Enumeration Types 13 December 2012 452 Ada Reference Manual — 2012 Edition The generic library package Text_IO.Bounded_IO has the following declaration: Static Semantics with Ada.Strings.Bounded; generic with package Bounded is new Ada.Strings.Bounded.Generic_Bounded_Length (<>); package Ada.Text_IO.Bounded_IO is procedure Put (File : in File_Type; Item : in Bounded.Bounded_String); procedure Put (Item : in Bounded.Bounded_String); procedure Put_Line (File : in File_Type; Item : in Bounded.Bounded_String); procedure Put_Line (Item : in Bounded.Bounded_String); function Get_Line (File : in File_Type) return Bounded.Bounded_String; function Get_Line return Bounded.Bounded_String; procedure Get_Line (File : in File_Type; Item : out Bounded.Bounded_String); procedure Get_Line (Item : out Bounded.Bounded_String); end Ada.Text_IO.Bounded_IO; For an item of type Bounded_String, the following subprograms are provided: procedure Put (File : in File_Type; Item : in Bounded.Bounded_String); Equivalent to Text_IO.Put (File, Bounded.To_String(Item)); procedure Put (Item : in Bounded.Bounded_String); Equivalent to Text_IO.Put (Bounded.To_String(Item)); procedure Put_Line (File : in File_Type; Item : in Bounded.Bounded_String); Equivalent to Text_IO.Put_Line (File, Bounded.To_String(Item)); procedure Put_Line (Item : in Bounded.Bounded_String); Equivalent to Text_IO.Put_Line (Bounded.To_String(Item)); function Get_Line (File : in File_Type) return Bounded.Bounded_String; Returns Bounded.To_Bounded_String(Text_IO.Get_Line(File)); function Get_Line return Bounded.Bounded_String; Returns Bounded.To_Bounded_String(Text_IO.Get_Line); 2/2 3/2 4/2 5/2 6/2 7/2 8/2 9/2 10/2 11/2 12/2 13/2 14/2 15/2 16/2 17/2 18/2 19/2 20/2 21/2 22/2 23/2 24/2 25/2 453 13 December 2012 Input-Output for Bounded Strings A.10.11 Ada Reference Manual — 2012 Edition 26/2 27/2 28/2 29/2 procedure Get_Line (File : in File_Type; Item : out Bounded.Bounded_String); Equivalent to Item := Get_Line (File); procedure Get_Line (Item : out Bounded.Bounded_String); Equivalent to Item := Get_Line; A.10.12 Input-Output for Unbounded Strings 1/2 The package Text_IO.Unbounded_IO provides Unbounded_Strings. input-output in human-readable form for The library package Text_IO.Unbounded_IO has the following declaration: Static Semantics with Ada.Strings.Unbounded; package Ada.Text_IO.Unbounded_IO is procedure Put (File : in File_Type; Item : in Strings.Unbounded.Unbounded_String); procedure Put (Item : in Strings.Unbounded.Unbounded_String); procedure Put_Line (File : in File_Type; Item : in Strings.Unbounded.Unbounded_String); procedure Put_Line (Item : in Strings.Unbounded.Unbounded_String); function Get_Line (File : in File_Type) return Strings.Unbounded.Unbounded_String; function Get_Line return Strings.Unbounded.Unbounded_String; procedure Get_Line (File : in File_Type; Item : out Strings.Unbounded.Unbounded_String); procedure Get_Line (Item : out Strings.Unbounded.Unbounded_String); end Ada.Text_IO.Unbounded_IO; For an item of type Unbounded_String, the following subprograms are provided: procedure Put (File : in File_Type; Item : in Strings.Unbounded.Unbounded_String); Equivalent to Text_IO.Put (File, Strings.Unbounded.To_String(Item)); procedure Put (Item : in Strings.Unbounded.Unbounded_String); Equivalent to Text_IO.Put (Strings.Unbounded.To_String(Item)); procedure Put_Line (File : in File_Type; Item : in Strings.Unbounded.Unbounded_String); Equivalent to Text_IO.Put_Line (File, Strings.Unbounded.To_String(Item)); 2/2 3/2 4/2 5/2 6/2 7/2 8/2 9/2 10/2 11/2 12/2 13/2 14/2 15/2 16/2 17/2 18/2 19/2 A.10.11 Input-Output for Bounded Strings 13 December 2012 454 Ada Reference Manual — 2012 Edition procedure Put_Line (Item : in Strings.Unbounded.Unbounded_String); Equivalent to Text_IO.Put_Line (Strings.Unbounded.To_String(Item)); function Get_Line (File : in File_Type) return Strings.Unbounded.Unbounded_String; Returns Strings.Unbounded.To_Unbounded_String(Text_IO.Get_Line(File)); function Get_Line return Strings.Unbounded.Unbounded_String; Returns Strings.Unbounded.To_Unbounded_String(Text_IO.Get_Line); procedure Get_Line (File : in File_Type; Item : out Strings.Unbounded.Unbounded_String); Equivalent to Item := Get_Line (File); procedure Get_Line (Item : out Strings.Unbounded.Unbounded_String); Equivalent to Item := Get_Line; A.11 Wide Text Input-Output and Wide Wide Text Input-Output The packages Wide_Text_IO and Wide_Wide_Text_IO provide facilities for input and output in human- readable form. Each file is read or written sequentially, as a sequence of wide characters (or wide wide characters) grouped into lines, and as a sequence of lines grouped into pages. Static Semantics The specification of package Wide_Text_IO is the same as that for Text_IO, except that in each Get, Look_Ahead, Get_Immediate, Get_Line, Put, and Put_Line subprogram, any occurrence of Character is replaced by Wide_Character, and any occurrence of String is replaced by Wide_String. Nongeneric equivalents of Wide_Text_IO.Integer_IO and Wide_Text_IO.Float_IO are provided (as for Text_IO) for each predefined numeric type, with names such as Ada.Integer_Wide_Text_IO, Ada.Long_Integer_- Wide_Text_IO, Ada.Float_Wide_Text_IO, Ada.Long_Float_Wide_Text_IO. The specification of package Wide_Wide_Text_IO is the same as that for Text_IO, except that in each Get, Look_Ahead, Get_Immediate, Get_Line, Put, and Put_Line subprogram, any occurrence of Character is replaced by Wide_Wide_Character, and any occurrence of String is replaced by Wide_Wide_String. Nongeneric equivalents of Wide_Wide_Text_IO.Integer_IO and Wide_Wide_Text_IO.Float_IO are provided (as for Text_IO) for each predefined numeric type, with names such as Ada.Integer_- Wide_Wide_Text_IO, Ada.Float_Wide_Wide_Text_IO, Ada.Long_Float_Wide_Wide_Text_IO. Ada.Long_Integer_Wide_Wide_Text_IO, specification of package Wide_Text_IO.Wide_Bounded_IO The for Text_IO.Bounded_IO, except that any occurrence of Bounded_String is replaced by Bounded_Wide_- String, and any occurrence of package Bounded is replaced by Wide_Bounded. The specification of package Wide_Wide_Text_IO.Wide_Wide_Bounded_IO is the same as that for Text_IO.Bounded_IO, except that any occurrence of Bounded_String is replaced by Bounded_Wide_Wide_String, and any occurrence of package Bounded is replaced by Wide_Wide_Bounded. same as that the is 20/2 21/2 22/2 23/2 24/2 25/2 26/2 27/2 28/2 29/2 1/2 2/2 3/2 4/3 The specification of package Wide_Text_IO.Wide_Unbounded_IO is the same as that for Text_IO.- Unbounded_IO, except that any occurrence of Unbounded_String is replaced by Unbounded_Wide_- String, and any occurrence of package Unbounded is replaced by Wide_Unbounded. The specification of 5/3 455 13 December 2012 Input-Output for Unbounded Strings A.10.12 Ada Reference Manual — 2012 Edition package Wide_Wide_Text_IO.Wide_Wide_Unbounded_IO for Text_IO.Unbounded_IO, except that any occurrence of Unbounded_String is replaced by Unbounded_- Wide_Wide_String, and any occurrence of package Unbounded is replaced by Wide_Wide_Unbounded. same that the as is A.12 Stream Input-Output 1/2 packages Streams.Stream_IO, Text_IO.Text_Streams, Wide_Text_IO.Text_Streams, The Wide_Wide_Text_IO.Text_Streams provide stream-oriented operations on files. and A.12.1 The Package Streams.Stream_IO 1 The subprograms in the child package Streams.Stream_IO provide control over stream files. Access to a stream file is either sequential, via a call on Read or Write to transfer an array of stream elements, or positional (if supported by the implementation for the given file), by specifying a relative index for an element. Since a stream file can be converted to a Stream_Access value, calling stream-oriented attribute subprograms of different element types with the same Stream_Access value provides heterogeneous input- output. See 13.13 for a general discussion of streams. 1.1/1 2 3/3 4 5 6 7 8 9 10 11 12 13 Static Semantics The elements of a stream file are stream elements. If positioning is supported for the specified external file, a current index and current size are maintained for the file as described in A.8. If positioning is not supported, a current index is not maintained, and the current size is implementation defined. The library package Streams.Stream_IO has the following declaration: with Ada.IO_Exceptions; package Ada.Streams.Stream_IO is pragma Preelaborate(Stream_IO); type Stream_Access is access all Root_Stream_Type'Class; type File_Type is limited private; type File_Mode is (In_File, Out_File, Append_File); type Count is range 0 .. implementation-defined; subtype Positive_Count is Count range 1 .. Count'Last; -- Index into file, in stream elements. procedure Create (File : in out File_Type; Mode : in File_Mode := Out_File; Name : in String := ""; Form : in String := ""); procedure Open (File : in out File_Type; Mode : in File_Mode; Name : in String; Form : in String := ""); procedure Close (File : in out File_Type); procedure Delete (File : in out File_Type); procedure Reset (File : in out File_Type; Mode : in File_Mode); procedure Reset (File : in out File_Type); function Mode (File : in File_Type) return File_Mode; function Name (File : in File_Type) return String; function Form (File : in File_Type) return String; function Is_Open (File : in File_Type) return Boolean; function End_Of_File (File : in File_Type) return Boolean; function Stream (File : in File_Type) return Stream_Access; -- Return stream access for use with T'Input and T'Output A.11 Wide Text Input-Output and Wide Wide Text Input-Output 13 December 2012 456 Ada Reference Manual — 2012 Edition This paragraph was deleted. -- Read array of stream elements from file procedure Read (File : in File_Type; Item : out Stream_Element_Array; Last : out Stream_Element_Offset; From : in Positive_Count); procedure Read (File : in File_Type; Item : out Stream_Element_Array; Last : out Stream_Element_Offset); This paragraph was deleted. -- Write array of stream elements into file procedure Write (File : in File_Type; Item : in Stream_Element_Array; To : in Positive_Count); procedure Write (File : in File_Type; Item : in Stream_Element_Array); This paragraph was deleted. -- Operations on position within file procedure Set_Index(File : in File_Type; To : in Positive_Count); function Index(File : in File_Type) return Positive_Count; function Size (File : in File_Type) return Count; procedure Set_Mode(File : in out File_Type; Mode : in File_Mode); procedure Flush(File : in File_Type); -- exceptions Status_Error : exception renames IO_Exceptions.Status_Error; Mode_Error : exception renames IO_Exceptions.Mode_Error; Name_Error : exception renames IO_Exceptions.Name_Error; Use_Error : exception renames IO_Exceptions.Use_Error; Device_Error : exception renames IO_Exceptions.Device_Error; End_Error : exception renames IO_Exceptions.End_Error; Data_Error : exception renames IO_Exceptions.Data_Error; private ... -- not specified by the language end Ada.Streams.Stream_IO; The type File_Type needs finalization (see 7.6). The subprograms given in subclause A.8.2 for the control of external files (Create, Open, Close, Delete, Reset, Mode, Name, Form, and Is_Open) are available for stream files. The End_Of_File function: • Propagates Mode_Error if the mode of the file is not In_File; • If positioning is supported for the given external file, the function returns True if the current index exceeds the size of the external file; otherwise, it returns False; • If positioning is not supported for the given external file, the function returns True if no more elements can be read from the given file; otherwise, it returns False. The Set_Mode procedure sets the mode of the file. If the new mode is Append_File, the file is positioned to its end; otherwise, the position in the file is unchanged. The Flush procedure synchronizes the external file with the internal file (by flushing any internal buffers) without closing the file or changing the position. Mode_Error is propagated if the mode of the file is In_File. 457 13 December 2012 The Package Streams.Stream_IO A.12.1 14/1 15 16 17/1 18 19 20/1 21 22 23 24 25/1 26 27 27.1/2 28/2 28.1/2 28.2/2 28.3/3 28.4/3 28.5/2 28.6/1 Ada Reference Manual — 2012 Edition 29/1 30/2 The Stream function returns a Stream_Access result from a File_Type object, thus allowing the stream- oriented attributes Read, Write, Input, and Output to be used on the same file for multiple types. Stream propagates Status_Error if File is not open. The procedures Read and Write are equivalent to the corresponding operations in the package Streams. Read propagates Mode_Error if the mode of File is not In_File. Write propagates Mode_Error if the mode of File is not Out_File or Append_File. The Read procedure with a Positive_Count parameter starts reading at the specified index. The Write procedure with a Positive_Count parameter starts writing at the specified index. For a file that supports positioning, Read without a Positive_Count parameter starts reading at the current index, and Write without a Positive_Count parameter starts writing at the current index. 30.1/1 The Size function returns the current size of the file. 31/1 The Index function returns the current index. 32 The Set_Index procedure sets the current index to the specified value. 32.1/1 If positioning is supported for the external file, the current index is maintained as follows: 32.2/1 • For Open and Create, if the Mode parameter is Append_File, the current index is set to the current size of the file plus one; otherwise, the current index is set to one. 32.3/1 • For Reset, if the Mode parameter is Append_File, or no Mode parameter is given and the current mode is Append_File, the current index is set to the current size of the file plus one; otherwise, the current index is set to one. 32.4/1 • For Set_Mode, if the new mode is Append_File, the current index is set to current size plus one; otherwise, the current index is unchanged. 32.5/1 • For Read and Write without a Positive_Count parameter, the current index is incremented by the number of stream elements read or written. 32.6/1 • For Read and Write with a Positive_Count parameter, the value of the current index is set to the value of the Positive_Count parameter plus the number of stream elements read or written. 33 If positioning is not supported for the given file, then a call of Index or Set_Index propagates Use_Error. Similarly, a call of Read or Write with a Positive_Count parameter propagates Use_Error. Paragraphs 34 through 36 were deleted. 36.1/1 If the File_Type object passed to the Stream function is later closed or finalized, and the stream-oriented attributes are subsequently called (explicitly or implicitly) on the Stream_Access value returned by Stream, execution is erroneous. This rule applies even if the File_Type object was opened again after it had been closed. Erroneous Execution 1 2 3 A.12.2 The Package Text_IO.Text_Streams The package Text_IO.Text_Streams provides a function for treating a text file as a stream. The library package Text_IO.Text_Streams has the following declaration: with Ada.Streams; package Ada.Text_IO.Text_Streams is type Stream_Access is access all Streams.Root_Stream_Type'Class; Static Semantics A.12.1 The Package Streams.Stream_IO 13 December 2012 458 Ada Reference Manual — 2012 Edition function Stream (File : in File_Type) return Stream_Access; end Ada.Text_IO.Text_Streams; The Stream function has the same effect as the corresponding function in Streams.Stream_IO. NOTES 38 The ability to obtain a stream for a text file allows Current_Input, Current_Output, and Current_Error to be processed with the functionality of streams, including the mixing of text and binary input-output, and the mixing of binary input- output for different types. 39 Performing operations on the stream associated with a text file does not affect the column, line, or page counts. A.12.3 The Package Wide_Text_IO.Text_Streams The package Wide_Text_IO.Text_Streams provides a function for treating a wide text file as a stream. Static Semantics The library package Wide_Text_IO.Text_Streams has the following declaration: with Ada.Streams; package Ada.Wide_Text_IO.Text_Streams is type Stream_Access is access all Streams.Root_Stream_Type'Class; function Stream (File : in File_Type) return Stream_Access; end Ada.Wide_Text_IO.Text_Streams; The Stream function has the same effect as the corresponding function in Streams.Stream_IO. 4 5 6 7 1 2 3 4 5 A.12.4 The Package Wide_Wide_Text_IO.Text_Streams The package Wide_Wide_Text_IO.Text_Streams provides a function for treating a wide wide text file as a stream. 1/2 Static Semantics The library package Wide_Wide_Text_IO.Text_Streams has the following declaration: with Ada.Streams; package Ada.Wide_Wide_Text_IO.Text_Streams is type Stream_Access is access all Streams.Root_Stream_Type'Class; function Stream (File : in File_Type) return Stream_Access; end Ada.Wide_Wide_Text_IO.Text_Streams; The Stream function has the same effect as the corresponding function in Streams.Stream_IO. A.13 Exceptions in Input-Output The package IO_Exceptions defines the exceptions needed by the predefined input-output packages. The library package IO_Exceptions has the following declaration: package Ada.IO_Exceptions is pragma Pure(IO_Exceptions); Static Semantics 2/2 3/2 4/2 5/2 1 2 3 459 13 December 2012 The Package Text_IO.Text_Streams A.12.2 4 5 6 7 8 9 10 11 12 13 14 Ada Reference Manual — 2012 Edition Status_Error : exception; Mode_Error : exception; Name_Error : exception; Use_Error : exception; Device_Error : exception; End_Error : exception; Data_Error : exception; Layout_Error : exception; end Ada.IO_Exceptions; If more than one error condition exists, the corresponding exception that appears earliest in the following list is the one that is propagated. The exception Status_Error is propagated by an attempt to operate upon a file that is not open, and by an attempt to open a file that is already open. The exception Mode_Error is propagated by an attempt to read from, or test for the end of, a file whose current mode is Out_File or Append_File, and also by an attempt to write to a file whose current mode is In_File. In the case of Text_IO, the exception Mode_Error is also propagated by specifying a file whose current mode is Out_File or Append_File in a call of Set_Input, Skip_Line, End_Of_Line, Skip_Page, or End_Of_Page; and by specifying a file whose current mode is In_File in a call of Set_Output, Set_Line_Length, Set_Page_Length, Line_Length, Page_Length, New_Line, or New_Page. The exception Name_Error is propagated by a call of Create or Open if the string given for the parameter Name does not allow the identification of an external file. For example, this exception is propagated if the string is improper, or, alternatively, if either none or more than one external file corresponds to the string. The exception Use_Error is propagated if an operation is attempted that is not possible for reasons that depend on characteristics of the external file. For example, this exception is propagated by the procedure Create, among other circumstances, if the given mode is Out_File but the form specifies an input only device, if the parameter Form specifies invalid access rights, or if an external file with the given name already exists and overwriting is not allowed. The exception Device_Error is propagated if an input-output operation cannot be completed because of a malfunction of the underlying system. The exception End_Error is propagated by an attempt to skip (read past) the end of a file. The exception Data_Error can be propagated by the procedure Read (or by the Read attribute) if the element read cannot be interpreted as a value of the required subtype. This exception is also propagated by a procedure Get (defined in the package Text_IO) if the input character sequence fails to satisfy the required syntax, or if the value input does not belong to the range of the required subtype. The exception Layout_Error is propagated (in text input-output) by Col, Line, or Page if the value returned exceeds Count'Last. The exception Layout_Error is also propagated on output by an attempt to set column or line numbers in excess of specified maximum line or page lengths, respectively (excluding the unbounded cases). It is also propagated by an attempt to Put too many characters to a string. 14.1/3 These exceptions are also propagated by various other language-defined packages and operations, see the definition of those entities for other reasons that these exceptions are propagated. 15 The implementation shall document the conditions under which Name_Error, Use_Error and Device_Error are propagated. Documentation Requirements A.13 Exceptions in Input-Output 13 December 2012 460 Ada Reference Manual — 2012 Edition If the associated check is too complex, an implementation need not propagate Data_Error as part of a procedure Read (or the Read attribute) if the value read cannot be interpreted as a value of the required subtype. Implementation Permissions If the element read by the procedure Read (or by the Read attribute) cannot be interpreted as a value of the required subtype, but this is not detected and Data_Error is not propagated, then the resulting value can be abnormal, and subsequent references to the value can lead to erroneous execution, as explained in 13.9.1. Erroneous Execution A.14 File Sharing Dynamic Semantics It is not specified by the language whether the same external file can be associated with more than one file object. If such sharing is supported by the implementation, the following effects are defined: • Operations on one text file object do not affect the column, line, and page numbers of any other file object. • This paragraph was deleted. • For direct and stream files, the current index is a property of each file object; an operation on one file object does not affect the current index of any other file object. • For direct and stream files, the current size of the file is a property of the external file. All other effects are identical. A.15 The Package Command_Line The package Command_Line allows a program to obtain the values of its arguments and to set the exit status code to be returned on normal termination. The library package Ada.Command_Line has the following declaration: Static Semantics package Ada.Command_Line is pragma Preelaborate(Command_Line); function Argument_Count return Natural; function Argument (Number : in Positive) return String; function Command_Name return String; type Exit_Status is implementation-defined integer type; Success : constant Exit_Status; Failure : constant Exit_Status; procedure Set_Exit_Status (Code : in Exit_Status); private ... -- not specified by the language end Ada.Command_Line; 16 17 1 2 3/1 4 5 6 1 2 3 4 5 6 7 8 9 10 461 13 December 2012 Exceptions in Input-Output A.13 Ada Reference Manual — 2012 Edition 11 12/3 13 14 15 16/3 16.1/1 17 18 19 20 21 22 function Argument_Count return Natural; If the external execution environment supports passing arguments to a program, then Argument_Count returns the number of arguments passed to the program invoking the function. Otherwise, it returns 0. The meaning of “number of arguments” is implementation defined. function Argument (Number : in Positive) return String; If the external execution environment supports passing arguments to a program, then Argument returns an implementation-defined value corresponding to the argument at relative position Number. If Number is outside the range 1..Argument_Count, then Constraint_Error is propagated. function Command_Name return String; If the external execution environment supports passing arguments to a program, then Command_Name returns an implementation-defined value corresponding to the name of the command invoking the program; otherwise, Command_Name returns the null string. type Exit_Status is implementation-defined integer type; The type Exit_Status represents the range of exit status values supported by the external execution environment. The constants Success and Failure correspond to success and failure, respectively. procedure Set_Exit_Status (Code : in Exit_Status); If the external execution environment supports returning an exit status from a program, then Set_Exit_Status sets Code as the status. Normal termination of a program returns as the exit status the value most recently set by Set_Exit_Status, or, if no such value has been set, then the value Success. If a program terminates abnormally, the status set by Set_Exit_Status is ignored, and an implementation-defined exit status value is set. If the external execution environment does not support returning an exit value from a program, then Set_Exit_Status does nothing. Implementation Permissions An alternative declaration is allowed for package Command_Line if different functionality is appropriate for the external execution environment. NOTES 40 Argument_Count, Argument, and Command_Name correspond to the C language's argc, argv[n] (for n>0) and argv[0], respectively. A.16 The Package Directories 1/2 The package Directories provides operations for manipulating files and directories, and their names. Static Semantics 2/2 3/2 4/2 5/2 The library package Directories has the following declaration: with Ada.IO_Exceptions; with Ada.Calendar; package Ada.Directories is -- Directory and file operations: function Current_Directory return String; A.15 The Package Command_Line 13 December 2012 462 Ada Reference Manual — 2012 Edition procedure Set_Directory (Directory : in String); procedure Create_Directory (New_Directory : in String; Form : in String := ""); procedure Delete_Directory (Directory : in String); procedure Create_Path (New_Directory : in String; Form : in String := ""); procedure Delete_Tree (Directory : in String); procedure Delete_File (Name : in String); procedure Rename (Old_Name, New_Name : in String); procedure Copy_File (Source_Name, Target_Name : in String; Form : in String := ""); -- File and directory name operations: function Full_Name (Name : in String) return String; function Simple_Name (Name : in String) return String; function Containing_Directory (Name : in String) return String; function Extension (Name : in String) return String; function Base_Name (Name : in String) return String; function Compose (Containing_Directory : in String := ""; Name : in String; Extension : in String := "") return String; type Name_Case_Kind is (Unknown, Case_Sensitive, Case_Insensitive, Case_Preserving); function Name_Case_Equivalence (Name : in String) return Name_Case_Kind; -- File and directory queries: type File_Kind is (Directory, Ordinary_File, Special_File); type File_Size is range 0 .. implementation-defined; function Exists (Name : in String) return Boolean; function Kind (Name : in String) return File_Kind; function Size (Name : in String) return File_Size; function Modification_Time (Name : in String) return Ada.Calendar.Time; -- Directory searching: type Directory_Entry_Type is limited private; type Filter_Type is array (File_Kind) of Boolean; type Search_Type is limited private; procedure Start_Search (Search : in out Search_Type; Directory : in String; Pattern : in String; Filter : in Filter_Type := (others => True)); procedure End_Search (Search : in out Search_Type); function More_Entries (Search : in Search_Type) return Boolean; procedure Get_Next_Entry (Search : in out Search_Type; Directory_Entry : out Directory_Entry_Type); procedure Search ( Directory : in String; Pattern : in String; Filter : in Filter_Type := (others => True); Process : not null access procedure ( Directory_Entry : in Directory_Entry_Type)); -- Operations on Directory Entries: 6/2 7/2 8/2 9/2 10/2 11/2 12/2 13/2 14/2 15/2 16/2 17/2 18/2 19/2 20/2 20.1/3 20.2/3 21/2 22/2 23/2 24/2 25/2 26/2 27/2 28/2 29/2 30/2 31/2 32/2 33/2 34/2 35/2 36/2 37/2 463 13 December 2012 The Package Directories A.16 Ada Reference Manual — 2012 Edition 38/2 39/2 40/2 41/2 42/2 43/2 44/3 45/2 46/2 47/2 48/2 49/2 function Simple_Name (Directory_Entry : in Directory_Entry_Type) return String; function Full_Name (Directory_Entry : in Directory_Entry_Type) return String; function Kind (Directory_Entry : in Directory_Entry_Type) return File_Kind; function Size (Directory_Entry : in Directory_Entry_Type) return File_Size; function Modification_Time (Directory_Entry : in Directory_Entry_Type) return Ada.Calendar.Time; Status_Error : exception renames Ada.IO_Exceptions.Status_Error; Name_Error : exception renames Ada.IO_Exceptions.Name_Error; Use_Error : exception renames Ada.IO_Exceptions.Use_Error; Device_Error : exception renames Ada.IO_Exceptions.Device_Error; private ... -- not specified by the language end Ada.Directories; External files may be classified as directories, special files, or ordinary files. A directory is an external file that is a container for files on the target system. A special file is an external file that cannot be created or read by a predefined Ada input-output package. External files that are not special files or directories are called ordinary files. A file name is a string identifying an external file. Similarly, a directory name is a string identifying a directory. The interpretation of file names and directory names is implementation-defined. The full name of an external file is a full specification of the name of the file. If the external environment allows alternative specifications of the name (for example, abbreviations), the full name should not use such alternatives. A full name typically will include the names of all of the directories that contain the item. The simple name of an external file is the name of the item, not including any containing directory names. Unless otherwise specified, a file name or directory name parameter in a call to a predefined Ada input-output subprogram can be a full name, a simple name, or any other form of name supported by the implementation. The default directory is the directory that is used if a directory or file name is not a full name (that is, when the name does not fully identify all of the containing directories). A directory entry is a single item in a directory, identifying a single external file (including directories and special files). 50/2 For each function that returns a string, the lower bound of the returned value is 1. 51/2 52/2 53/2 54/2 55/2 The following file and directory operations are provided: function Current_Directory return String; Returns the full directory name for the current default directory. The name returned shall be suitable for a future call to Set_Directory. The exception Use_Error is propagated if a default directory is not supported by the external environment. procedure Set_Directory (Directory : in String); Sets the current default directory. The exception Name_Error is propagated if the string given as Directory does not identify an existing directory. The exception Use_Error is propagated if the external environment does not support making Directory (in the absence of Name_Error) a default directory. A.16 The Package Directories 13 December 2012 464 Ada Reference Manual — 2012 Edition procedure Create_Directory (New_Directory : in String; Form : in String := ""); Creates a directory with name New_Directory. The Form parameter can be used to give system- dependent characteristics of the directory; the interpretation of the Form parameter is implementation-defined. A null string for Form specifies the use of the default options of the implementation of the new directory. The exception Name_Error is propagated if the string given as New_Directory does not allow the identification of a directory. The exception Use_Error is propagated if the external environment does not support the creation of a directory with the given name (in the absence of Name_Error) and form. procedure Delete_Directory (Directory : in String); Deletes an existing empty directory with name Directory. The exception Name_Error is propagated if the string given as Directory does not identify an existing directory. The exception Use_Error is propagated if the directory is not empty or the external environment does not support the deletion of the directory with the given name (in the absence of Name_Error). procedure Create_Path (New_Directory : in String; Form : in String := ""); Creates zero or more directories with name New_Directory. Each nonexistent directory named by New_Directory is created. For example, on a typical Unix system, Create_Path ("/usr/me/my"); would create directory "me" in directory "usr", then create directory "my" in directory "me". The Form parameter can be used to give system-dependent characteristics of the directory; the interpretation of the Form parameter is implementation-defined. A null string for Form specifies the use of the default options of the implementation of the new directory. The exception Name_Error is propagated if the string given as New_Directory does not allow the identification of any directory. The exception Use_Error is propagated if the external environment does not support the creation of any directories with the given name (in the absence of Name_Error) and form. If Use_Error is propagated, it is unspecified whether a portion of the directory path is created. procedure Delete_Tree (Directory : in String); Deletes an existing directory with name Directory. The directory and all of its contents (possibly including other directories) are deleted. The exception Name_Error is propagated if the string given as Directory does not identify an existing directory. The exception Use_Error is propagated if the external environment does not support the deletion of the directory or some portion of its contents with the given name (in the absence of Name_Error). If Use_Error is propagated, it is unspecified whether a portion of the contents of the directory is deleted. procedure Delete_File (Name : in String); Deletes an existing ordinary or special file with name Name. The exception Name_Error is propagated if the string given as Name does not identify an existing ordinary or special external file. The exception Use_Error is propagated if the external environment does not support the deletion of the file with the given name (in the absence of Name_Error). procedure Rename (Old_Name, New_Name : in String); Renames an existing external file (including directories) with name Old_Name to New_Name. The exception Name_Error is propagated if the string given as Old_Name does not identify an existing external file or if the string given as New_Name does not allow the identification of an external file. The exception Use_Error is propagated if the external environment does not 56/2 57/2 58/2 59/3 60/2 61/3 62/2 63/2 64/2 65/2 66/2 67/3 465 13 December 2012 The Package Directories A.16 Ada Reference Manual — 2012 Edition 68/3 69/3 70/2 71/2 72/2 73/2 74/2 75/2 76/2 77/2 78/2 79/2 80/2 support the renaming of the file with the given name (in the absence of Name_Error). In particular, Use_Error is propagated if a file or directory already exists with name New_Name. procedure Copy_File (Source_Name, Target_Name : in String; Form : in String := ""); Copies the contents of the existing external file with name Source_Name to an external file with name Target_Name. The resulting external file is a duplicate of the source external file. The Form parameter can be used to give system-dependent characteristics of the resulting external file; the interpretation of the Form parameter is implementation-defined. Exception Name_Error is propagated if the string given as Source_Name does not identify an existing external ordinary or special file, or if the string given as Target_Name does not allow the identification of an external file. The exception Use_Error is propagated if the external environment does not support creating the file with the name given by Target_Name and form given by Form, or copying of the file with the name given by Source_Name (in the absence of Name_Error). If Use_Error is propagated, it is unspecified whether a portion of the file is copied. The following file and directory name operations are provided: function Full_Name (Name : in String) return String; Returns the full name corresponding to the file name specified by Name. The exception Name_Error is propagated if the string given as Name does not allow the identification of an external file (including directories and special files). function Simple_Name (Name : in String) return String; Returns the simple name portion of the file name specified by Name. The exception Name_Error is propagated if the string given as Name does not allow the identification of an external file (including directories and special files). function Containing_Directory (Name : in String) return String; Returns the name of the containing directory of the external file (including directories) identified by Name. (If more than one directory can contain Name, the directory name returned is implementation-defined.) The exception Name_Error is propagated if the string given as Name does not allow the identification of an external file. The exception Use_Error is propagated if the external file does not have a containing directory. function Extension (Name : in String) return String; Returns the extension name corresponding to Name. The extension name is a portion of a simple name (not including any separator characters), typically used to identify the file class. If the external environment does not have extension names, then the null string is returned. The exception Name_Error is propagated if the string given as Name does not allow the identification of an external file. function Base_Name (Name : in String) return String; Returns the base name corresponding to Name. The base name is the remainder of a simple name after removing any extension and extension separators. The exception Name_Error is propagated if the string given as Name does not allow the identification of an external file (including directories and special files). A.16 The Package Directories 13 December 2012 466 Ada Reference Manual — 2012 Edition function Compose (Containing_Directory : in String := ""; Name : in String; Extension : in String := "") return String; Returns the name of the external file with the specified Containing_Directory, Name, and Extension. If Extension is the null string, then Name is interpreted as a simple name; otherwise, Name is interpreted as a base name. The exception Name_Error is propagated if the string given as Containing_Directory is not null and does not allow the identification of a directory, or if the string given as Extension is not null and is not a possible extension, or if the string given as Name is not a possible simple name (if Extension is null) or base name (if Extension is nonnull). function Name_Case_Equivalence (Name : in String) return Name_Case_Kind; Returns the file name equivalence rule for the directory containing Name. Raises Name_Error if Name is not a full name. Returns Case_Sensitive if file names that differ only in the case of letters are considered different names. If file names that differ only in the case of letters are considered the same name, then Case_Preserving is returned if names have the case of the file name used when a file is created; and Case_Insensitive is returned otherwise. Returns Unknown if the file name equivalence is not known. The following file and directory queries and types are provided: type File_Kind is (Directory, Ordinary_File, Special_File); The type File_Kind represents the kind of file represented by an external file or directory. type File_Size is range 0 .. implementation-defined; The type File_Size represents the size of an external file. function Exists (Name : in String) return Boolean; Returns True if an external file represented by Name exists, and False otherwise. The exception Name_Error is propagated if the string given as Name does not allow the identification of an external file (including directories and special files). function Kind (Name : in String) return File_Kind; Returns the kind of external file represented by Name. The exception Name_Error is propagated if the string given as Name does not allow the identification of an existing external file. function Size (Name : in String) return File_Size; Returns the size of the external file represented by Name. The size of an external file is the number of stream elements contained in the file. If the external file is not an ordinary file, the result is implementation-defined. The exception Name_Error is propagated if the string given as Name does not allow the identification of an existing external file. The exception Constraint_Error is propagated if the file size is not a value of type File_Size. function Modification_Time (Name : in String) return Ada.Calendar.Time; Returns the time that the external file represented by Name was most recently modified. If the external file is not an ordinary file, the result is implementation-defined. The exception Name_Error is propagated if the string given as Name does not allow the identification of an existing external file. The exception Use_Error is propagated if the external environment does not support reading the modification time of the file with the name given by Name (in the absence of Name_Error). The following directory searching operations and types are provided: 81/2 82/3 82.1/3 82.2/3 83/2 84/2 85/2 86/2 87/2 88/2 89/2 90/2 91/2 92/2 93/2 94/2 95/2 96/2 467 13 December 2012 The Package Directories A.16 Ada Reference Manual — 2012 Edition 97/2 98/2 99/2 100/2 101/2 102/2 103/2 104/3 105/2 106/2 107/2 108/2 109/2 110/3 type Directory_Entry_Type is limited private; The type Directory_Entry_Type represents a single item in a directory. These items can only be created by the Get_Next_Entry procedure in this package. Information about the item can be obtained from the functions declared in this package. A default-initialized object of this type is invalid; objects returned from Get_Next_Entry are valid. type Filter_Type is array (File_Kind) of Boolean; The type Filter_Type specifies which directory entries are provided from a search operation. If the Directory component is True, directory entries representing directories are provided. If the Ordinary_File component is True, directory entries representing ordinary files are provided. If the Special_File component is True, directory entries representing special files are provided. type Search_Type is limited private; The type Search_Type contains the state of a directory search. A default-initialized Search_Type object has no entries available (function More_Entries returns False). Type Search_Type needs finalization (see 7.6). procedure Start_Search (Search : in out Search_Type; Directory : in String; Pattern : in String; Filter : in Filter_Type := (others => True)); Starts a search in the directory named by Directory for entries matching Pattern and Filter. Pattern represents a pattern for matching file names. If Pattern is the null string, all items in the directory are matched; otherwise, the interpretation of Pattern is implementation-defined. Only items that match Filter will be returned. After a successful call on Start_Search, the object Search may have entries available, but it may have no entries available if no files or directories match Pattern and Filter. The exception Name_Error is propagated if the string given by Directory does not identify an existing directory, or if Pattern does not allow the identification of any possible external file or directory. The exception Use_Error is propagated if the external environment does not support the searching of the directory with the given name (in the absence of Name_Error). When Start_Search propagates Name_Error or Use_Error, the object Search will have no entries available. procedure End_Search (Search : in out Search_Type); Ends the search represented by Search. After a successful call on End_Search, the object Search will have no entries available. function More_Entries (Search : in Search_Type) return Boolean; Returns True if more entries are available to be returned by a call to Get_Next_Entry for the specified search object, and False otherwise. procedure Get_Next_Entry (Search : in out Search_Type; Directory_Entry : out Directory_Entry_Type); Returns the next Directory_Entry for the search described by Search that matches the pattern and filter. If no further matches are available, Status_Error is raised. It is implementation-defined as to whether the results returned by this subprogram are altered if the contents of the directory are altered while the Search object is valid (for example, by another program). The exception Use_Error is propagated if the external environment does not support continued searching of the directory represented by Search. A.16 The Package Directories 13 December 2012 468 Ada Reference Manual — 2012 Edition procedure Search ( Directory : in String; Pattern : in String; Filter : in Filter_Type := (others => True); Process : not null access procedure ( Directory_Entry : in Directory_Entry_Type)); Searches in the directory named by Directory for entries matching Pattern and Filter. The subprogram designated by Process is called with each matching entry in turn. Pattern represents a pattern for matching file names. If Pattern is the null string, all items in the directory are matched; otherwise, the interpretation of Pattern is implementation-defined. Only items that match Filter will be returned. The exception Name_Error is propagated if the string given by Directory does not identify an existing directory, or if Pattern does not allow the identification of any possible external file or directory. The exception Use_Error is propagated if the external environment does not support the searching of the directory with the given name (in the absence of Name_Error). function Simple_Name (Directory_Entry : in Directory_Entry_Type) return String; Returns the simple external name of the external file (including directories) represented by Directory_Entry. The format of the name returned is implementation-defined. The exception Status_Error is propagated if Directory_Entry is invalid. function Full_Name (Directory_Entry : in Directory_Entry_Type) return String; Returns the full external name of the external file (including directories) represented by Directory_Entry. The format of the name returned is implementation-defined. The exception Status_Error is propagated if Directory_Entry is invalid. function Kind (Directory_Entry : in Directory_Entry_Type) return File_Kind; Returns the kind of external file represented by Directory_Entry. The exception Status_Error is propagated if Directory_Entry is invalid. function Size (Directory_Entry : in Directory_Entry_Type) return File_Size; Returns the size of the external file represented by Directory_Entry. The size of an external file is the number of stream elements contained in the file. If the external file represented by Directory_Entry is not an ordinary file, the result is implementation-defined. The exception Status_Error is propagated if Directory_Entry is invalid. The exception Constraint_Error is propagated if the file size is not a value of type File_Size. function Modification_Time (Directory_Entry : in Directory_Entry_Type) return Ada.Calendar.Time; Returns the time that the external file represented by Directory_Entry was most recently modified. If the external file represented by Directory_Entry is not an ordinary file, the result is implementation-defined. The exception Status_Error is propagated if Directory_Entry is invalid. The exception Use_Error is propagated if the external environment does not support reading the modification time of the file represented by Directory_Entry. 111/2 112/3 113/2 114/2 115/2 116/2 117/2 118/2 119/2 120/2 121/2 122/2 469 13 December 2012 The Package Directories A.16 Ada Reference Manual — 2012 Edition 123/2 For Copy_File, if Source_Name identifies an existing external ordinary file created by a predefined Ada input-output package, and Target_Name and Form can be used in the Create operation of that input-output package with mode Out_File without raising an exception, then Copy_File shall not propagate Use_Error. Implementation Requirements 124/2 125/3 126/2 127/2 128/2 129/2 130/2 131/2 Implementation Advice If other information about a file (such as the owner or creation date) is available in a directory entry, the implementation should provide functions in a child package Directories.Information to retrieve it. Start_Search and Search should raise Name_Error if Pattern is malformed, but not if it could represent a file in the directory but does not actually do so. Rename should be supported at least when both New_Name and Old_Name are simple names and New_Name does not identify an existing external file. NOTES 41 The operations Containing_Directory, Full_Name, Simple_Name, Base_Name, Extension, and Compose operate on file names, not external files. The files identified by these operations do not need to exist. Name_Error is raised only if the file name is malformed and cannot possibly identify a file. Of these operations, only the result of Full_Name depends on the current default directory; the result of the others depends only on their parameters. 42 Using access types, values of Search_Type and Directory_Entry_Type can be saved and queried later. However, another task or application can modify or delete the file represented by a Directory_Entry_Type value or the directory represented by a Search_Type value; such a value can only give the information valid at the time it is created. Therefore, long-term storage of these values is not recommended. 43 If the target system does not support directories inside of directories, then Kind will never return Directory and Containing_Directory will always raise Use_Error. 44 If the target system does not support creation or deletion of directories, then Create_Directory, Create_Path, Delete_Directory, and Delete_Tree will always propagate Use_Error. 45 To move a file or directory to a different location, use Rename. Most target systems will allow renaming of files from one directory to another. If the target file or directory might already exist, it should be deleted first. A.16.1 The Package Directories.Hierarchical_File_Names 1/3 The library package Directories.Hierarchical_File_Names is an optional package providing operations for file name construction and decomposition for targets with hierarchical file naming. Static Semantics 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 If provided, the library package Directories.Hierarchical_File_Names has the following declaration: package Ada.Directories.Hierarchical_File_Names is function Is_Simple_Name (Name : in String) return Boolean; function Is_Root_Directory_Name (Name : in String) return Boolean; function Is_Parent_Directory_Name (Name : in String) return Boolean; function Is_Current_Directory_Name (Name : in String) return Boolean; function Is_Full_Name (Name : in String) return Boolean; function Is_Relative_Name (Name : in String) return Boolean; function Simple_Name (Name : in String) return String renames Ada.Directories.Simple_Name; function Containing_Directory (Name : in String) return String renames Ada.Directories.Containing_Directory; function Initial_Directory (Name : in String) return String; A.16 The Package Directories 13 December 2012 470 Ada Reference Manual — 2012 Edition function Relative_Name (Name : in String) return String; function Compose (Directory : in String := ""; Relative_Name : in String; Extension : in String := "") return String; end Ada.Directories.Hierarchical_File_Names; In addition to the operations provided in package Directories.Hierarchical_File_Names, the operations in package Directories can be used with hierarchical file names. In particular, functions Full_Name, Base_Name, and Extension provide additional capabilities for hierarchical file names. function Is_Simple_Name (Name : in String) return Boolean; Returns True if Name is a simple name, and returns False otherwise. function Is_Root_Directory_Name (Name : in String) return Boolean; Returns True if Name is syntactically a root (a directory that cannot be decomposed further), and returns False otherwise. function Is_Parent_Directory_Name (Name : in String) return Boolean; Returns True if Name can be used to indicate symbolically the parent directory of any directory, and returns False otherwise. function Is_Current_Directory_Name (Name : in String) return Boolean; Returns True if Name can be used to indicate symbolically the directory itself for any directory, and returns False otherwise. function Is_Full_Name (Name : in String) return Boolean; Returns True if the leftmost directory part of Name is a root, and returns False otherwise. function Is_Relative_Name (Name : in String) return Boolean; Returns True if Name allows the identification of an external file (including directories and special files) but is not a full name, and returns False otherwise. function Initial_Directory (Name : in String) return String; Returns the leftmost directory part in Name. That is, it returns a root directory name (for a full name), or one of a parent directory name, a current directory name, or a simple name (for a relative name). The exception Name_Error is propagated if the string given as Name does not allow the identification of an external file (including directories and special files). function Relative_Name (Name : in String) return String; Returns the entire file name except the Initial_Directory portion. The exception Name_Error is propagated if the string given as Name does not allow the identification of an external file (including directories and special files), or if Name has a single part (this includes if any of Is_Simple_Name, or Is_Current_Directory_Name are True). Is_Parent_Directory_Name, Is_Root_Directory_Name, function Compose (Directory : in String := ""; Relative_Name : in String; Extension : in String := "") return String; Returns the name of the external file with the specified Directory, Relative_Name, and Extension. The exception Name_Error is propagated if the string given as Directory is not the null string and does not allow the identification of a directory, or if Is_Relative_Name (Relative_Name) is False, or if the string given as Extension is not the null string and is not a possible extension, or if Extension is not the null string and Simple_Name (Relative_Name) is not a base name. 471 13 December 2012 The Package Directories.Hierarchical_File_Names A.16.1 13/3 14/3 15/3 16/3 17/3 18/3 19/3 20/3 21/3 22/3 23/3 24/3 25/3 26/3 27/3 28/3 29/3 30/3 31/3 32/3 33/3 34/3 Ada Reference Manual — 2012 Edition 35/3 The result of Compose is a full name if Is_Full_Name (Directory) is True; result is a relative name otherwise. 36/3 Directories.Hierarchical_File_Names should be provided for systems with hierarchical file naming, and should not be provided on other systems. Implementation Advice 37/3 38/3 1/2 2/2 3/2 4/2 4.1/3 5/2 6/2 7/2 8/3 9/2 10/2 11/2 11.1/3 11.2/3 12/2 13/3 NOTES 46 These operations operate on file names, not external files. The files identified by these operations do not need to exist. Name_Error is raised only as specified or if the file name is malformed and cannot possibly identify a file. The result of these operations depends only on their parameters. 47 Containing_Directory raises Use_Error if Name does not have a containing directory, including when any of Is_Simple_Name, Is_Root_Directory_Name, Is_Parent_Directory_Name, or Is_Current_Directory_Name are True. A.17 The Package Environment_Variables The package Environment_Variables allows a program to read or modify environment variables. Environment variables are name-value pairs, where both the name and value are strings. The definition of what constitutes an environment variable, and the meaning of the name and value, are implementation defined. The library package Environment_Variables has the following declaration: Static Semantics package Ada.Environment_Variables is pragma Preelaborate(Environment_Variables); function Value (Name : in String) return String; function Value (Name : in String; Default : in String) return String; function Exists (Name : in String) return Boolean; procedure Set (Name : in String; Value : in String); procedure Clear (Name : in String); procedure Clear; procedure Iterate (Process : not null access procedure (Name, Value : in String)); end Ada.Environment_Variables; function Value (Name : in String) return String; If the external execution environment supports environment variables, then Value returns the value of the environment variable with the given name. If no environment variable with the given name exists, then Constraint_Error is propagated. If the execution environment does not support environment variables, then Program_Error is propagated. function Value (Name : in String; Default : in String) return String; If the external execution environment supports environment variables and an environment variable with the given name currently exists, then Value returns its value; otherwise, it returns Default. function Exists (Name : in String) return Boolean; If the external execution environment supports environment variables and an environment variable with the given name currently exists, then Exists returns True; otherwise, it returns False. A.16.1 The Package Directories.Hierarchical_File_Names 13 December 2012 472 Ada Reference Manual — 2012 Edition procedure Set (Name : in String; Value : in String); If the external execution environment supports environment variables, then Set first clears any existing environment variable with the given name, and then defines a single new environment variable with the given name and value. Otherwise, Program_Error is propagated. If implementation-defined circumstances prohibit the definition of an environment variable with the given name and value, then Constraint_Error is propagated. It is implementation defined whether there exist values for which the call Set(Name, Value) has the same effect as Clear (Name). procedure Clear (Name : in String); If the external execution environment supports environment variables, then Clear deletes all existing environment variables with the given name. Otherwise, Program_Error is propagated. procedure Clear; If the external execution environment supports environment variables, then Clear deletes all existing environment variables. Otherwise, Program_Error is propagated. procedure Iterate (Process : not null access procedure (Name, Value : in String)); If the external execution environment supports environment variables, then Iterate calls the subprogram designated by Process for each existing environment variable, passing the name and value of that environment variable. Otherwise, Program_Error is propagated. 14/2 15/3 16/2 17/2 18/2 19/3 20/2 21/3 22/3 23/3 If several environment variables exist that have the same name, Process is called once for each such variable. 24/2 Bounded (Run-Time) Errors It is a bounded error to call Value if more than one environment variable exists with the given name; the possible outcomes are that: • one of the values is returned, and that same value is returned in subsequent calls in the absence of changes to the environment; or • Program_Error is propagated. Erroneous Execution Making calls to the procedures Set or Clear concurrently with calls to any subprogram of package Environment_Variables, or to any instantiation of Iterate, results in erroneous execution. Making calls to the procedures Set or Clear in the actual subprogram corresponding to the Process parameter of Iterate results in erroneous execution. 25/2 26/2 27/2 28/2 29/2 An implementation shall document how the operations of this package behave if environment variables are changed by external mechanisms (for instance, calling operating system services). 30/2 Documentation Requirements An implementation running on a system that does not support environment variables is permitted to define the operations of package Environment_Variables with the semantics corresponding to the case where the 31/2 Implementation Permissions 473 13 December 2012 The Package Environment_Variables A.17 Ada Reference Manual — 2012 Edition external execution environment does support environment variables. In this case, it shall provide a mechanism to initialize a nonempty set of environment variables prior to the execution of a partition. Implementation Advice 32/2 33/2 If the execution environment supports subprocesses, the currently defined environment variables should be used to initialize the environment variables of a subprocess. Changes to the environment variables made outside the control of this package should be reflected immediately in the effect of the operations of this package. Changes to the environment variables made using this package should be reflected immediately in the external execution environment. This package should not perform any buffering of the environment variables. A.17 The Package Environment_Variables 13 December 2012 474 Ada Reference Manual — 2012 Edition A.18 Containers This clause presents the specifications of the package Containers and several child packages, which provide facilities for storing collections of elements. A variety of sequence and associative containers are provided. Each container includes a cursor type. A cursor is a reference to an element within a container. Many operations on cursors are common to all of the containers. A cursor referencing an element in a container is considered to be overlapping with the container object itself. Within this clause we provide Implementation Advice for the desired average or worst case time complexity of certain operations on a container. This advice is expressed using the Landau symbol O(X). Presuming f is some function of a length parameter N and t(N) is the time the operation takes (on average or worst case, as specified) for the length N, a complexity of O(f(N)) means that there exists a finite A such that for any N, t(N)/f(N) < A. If the advice suggests that the complexity should be less than O(f(N)), then for any arbitrarily small positive real D, there should exist a positive integer M such that for all N > M, t(N)/f(N) < D. When a formal function is used to provide an ordering for a container, it is generally required to define a strict weak ordering. A function "<" defines a strict weak ordering if it is irreflexive, asymmetric, transitive, and in addition, if x < y for any values x and y, then for all other values z, (x < z) or (z < y). A.18.1 The Package Containers The package Containers is the root of the containers subsystem. The library package Containers has the following declaration: Static Semantics package Ada.Containers is pragma Pure(Containers); type Hash_Type is mod implementation-defined; type Count_Type is range 0 .. implementation-defined; Capacity_Error : exception; end Ada.Containers; Hash_Type represents the range of the result of a hash function. Count_Type represents the (potential or actual) number of elements of a container. Capacity_Error is raised when the capacity of a container is exceeded. Hash_Type'Modulus should be at least 2**32. Count_Type'Last should be at least 2**31–1. Implementation Advice A.18.2 The Generic Package Containers.Vectors The language-defined generic package Containers.Vectors provides private types Vector and Cursor, and a set of operations for each type. A vector container allows insertion and deletion at any position, but it is specifically optimized for insertion and deletion at the high end (the end with the higher index) of the container. A vector container also provides random access to its elements. 475 13 December 2012 Containers A.18 1/2 2/2 3/2 4/2 5/3 1/2 2/2 3/2 4/2 5/2 5.1/3 6/2 7/2 7.1/3 8/2 1/2 Ada Reference Manual — 2012 Edition 2/2 3/2 A vector container behaves conceptually as an array that expands as necessary as items are inserted. The length of a vector is the number of elements that the vector contains. The capacity of a vector is the maximum number of elements that can be inserted into the vector prior to it being automatically expanded. Elements in a vector container can be referred to by an index value of a generic formal type. The first element of a vector always has its index value equal to the lower bound of the formal type. 4/2 A vector container may contain empty elements. Empty elements do not have a specified value. 5/2 6/3 7/2 8/3 9/2 10/2 11/2 11.1/3 11.2/3 12/2 13/2 14/2 15/2 16/2 17/2 18/2 19/2 20/2 21/2 22/2 The generic library package Containers.Vectors has the following declaration: Static Semantics with Ada.Iterator_Interfaces; generic type Index_Type is range <>; type Element_Type is private; with function "=" (Left, Right : Element_Type) return Boolean is <>; package Ada.Containers.Vectors is pragma Preelaborate(Vectors); pragma Remote_Types(Vectors); subtype Extended_Index is Index_Type'Base range Index_Type'First-1 .. Index_Type'Min (Index_Type'Base'Last - 1, Index_Type'Last) + 1; No_Index : constant Extended_Index := Extended_Index'First; type Vector is tagged private with Constant_Indexing => Constant_Reference, Variable_Indexing => Reference, Default_Iterator => Iterate, Iterator_Element => Element_Type; pragma Preelaborable_Initialization(Vector); type Cursor is private; pragma Preelaborable_Initialization(Cursor); Empty_Vector : constant Vector; No_Element : constant Cursor; function Has_Element (Position : Cursor) return Boolean; package Vector_Iterator_Interfaces is new Ada.Iterator_Interfaces (Cursor, Has_Element); function "=" (Left, Right : Vector) return Boolean; function To_Vector (Length : Count_Type) return Vector; function To_Vector (New_Item : Element_Type; Length : Count_Type) return Vector; function "&" (Left, Right : Vector) return Vector; function "&" (Left : Vector; Right : Element_Type) return Vector; function "&" (Left : Element_Type; Right : Vector) return Vector; function "&" (Left, Right : Element_Type) return Vector; function Capacity (Container : Vector) return Count_Type; procedure Reserve_Capacity (Container : in out Vector; Capacity : in Count_Type); function Length (Container : Vector) return Count_Type; procedure Set_Length (Container : in out Vector; Length : in Count_Type); A.18.2 The Generic Package Containers.Vectors 13 December 2012 476 Ada Reference Manual — 2012 Edition function Is_Empty (Container : Vector) return Boolean; procedure Clear (Container : in out Vector); function To_Cursor (Container : Vector; Index : Extended_Index) return Cursor; function To_Index (Position : Cursor) return Extended_Index; function Element (Container : Vector; Index : Index_Type) return Element_Type; function Element (Position : Cursor) return Element_Type; procedure Replace_Element (Container : in out Vector; Index : in Index_Type; New_Item : in Element_Type); procedure Replace_Element (Container : in out Vector; Position : in Cursor; New_item : in Element_Type); procedure Query_Element (Container : in Vector; Index : in Index_Type; Process : not null access procedure (Element : in Element_Type)); procedure Query_Element (Position : in Cursor; Process : not null access procedure (Element : in Element_Type)); procedure Update_Element (Container : in out Vector; Index : in Index_Type; Process : not null access procedure (Element : in out Element_Type)); procedure Update_Element (Container : in out Vector; Position : in Cursor; Process : not null access procedure (Element : in out Element_Type)); type Constant_Reference_Type (Element : not null access constant Element_Type) is private with Implicit_Dereference => Element; type Reference_Type (Element : not null access Element_Type) is private with Implicit_Dereference => Element; function Constant_Reference (Container : aliased in Vector; Index : in Index_Type) return Constant_Reference_Type; function Reference (Container : aliased in out Vector; Index : in Index_Type) return Reference_Type; function Constant_Reference (Container : aliased in Vector; Position : in Cursor) return Constant_Reference_Type; function Reference (Container : aliased in out Vector; Position : in Cursor) return Reference_Type; procedure Assign (Target : in out Vector; Source : in Vector); function Copy (Source : Vector; Capacity : Count_Type := 0) return Vector; procedure Move (Target : in out Vector; Source : in out Vector); procedure Insert (Container : in out Vector; Before : in Extended_Index; New_Item : in Vector); 23/2 24/2 25/2 26/2 27/2 28/2 29/2 30/2 31/2 32/2 33/2 34/2 34.1/3 34.2/3 34.3/3 34.4/3 34.5/3 34.6/3 34.7/3 34.8/3 35/2 36/2 477 13 December 2012 The Generic Package Containers.Vectors A.18.2 Ada Reference Manual — 2012 Edition 37/2 38/2 39/2 40/2 41/2 42/2 43/2 44/2 45/2 46/2 47/2 48/2 49/2 50/2 51/2 52/2 53/2 54/2 55/2 procedure Insert (Container : in out Vector; Before : in Cursor; New_Item : in Vector); procedure Insert (Container : in out Vector; Before : in Cursor; New_Item : in Vector; Position : out Cursor); procedure Insert (Container : in out Vector; Before : in Extended_Index; New_Item : in Element_Type; Count : in Count_Type := 1); procedure Insert (Container : in out Vector; Before : in Cursor; New_Item : in Element_Type; Count : in Count_Type := 1); procedure Insert (Container : in out Vector; Before : in Cursor; New_Item : in Element_Type; Position : out Cursor; Count : in Count_Type := 1); procedure Insert (Container : in out Vector; Before : in Extended_Index; Count : in Count_Type := 1); procedure Insert (Container : in out Vector; Before : in Cursor; Position : out Cursor; Count : in Count_Type := 1); procedure Prepend (Container : in out Vector; New_Item : in Vector); procedure Prepend (Container : in out Vector; New_Item : in Element_Type; Count : in Count_Type := 1); procedure Append (Container : in out Vector; New_Item : in Vector); procedure Append (Container : in out Vector; New_Item : in Element_Type; Count : in Count_Type := 1); procedure Insert_Space (Container : in out Vector; Before : in Extended_Index; Count : in Count_Type := 1); procedure Insert_Space (Container : in out Vector; Before : in Cursor; Position : out Cursor; Count : in Count_Type := 1); procedure Delete (Container : in out Vector; Index : in Extended_Index; Count : in Count_Type := 1); procedure Delete (Container : in out Vector; Position : in out Cursor; Count : in Count_Type := 1); procedure Delete_First (Container : in out Vector; Count : in Count_Type := 1); procedure Delete_Last (Container : in out Vector; Count : in Count_Type := 1); procedure Reverse_Elements (Container : in out Vector); procedure Swap (Container : in out Vector; I, J : in Index_Type); A.18.2 The Generic Package Containers.Vectors 13 December 2012 478 Ada Reference Manual — 2012 Edition procedure Swap (Container : in out Vector; I, J : in Cursor); function First_Index (Container : Vector) return Index_Type; function First (Container : Vector) return Cursor; function First_Element (Container : Vector) return Element_Type; function Last_Index (Container : Vector) return Extended_Index; function Last (Container : Vector) return Cursor; function Last_Element (Container : Vector) return Element_Type; function Next (Position : Cursor) return Cursor; procedure Next (Position : in out Cursor); function Previous (Position : Cursor) return Cursor; procedure Previous (Position : in out Cursor); function Find_Index (Container : Vector; Item : Element_Type; Index : Index_Type := Index_Type'First) return Extended_Index; function Find (Container : Vector; Item : Element_Type; Position : Cursor := No_Element) return Cursor; function Reverse_Find_Index (Container : Vector; Item : Element_Type; Index : Index_Type := Index_Type'Last) return Extended_Index; function Reverse_Find (Container : Vector; Item : Element_Type; Position : Cursor := No_Element) return Cursor; function Contains (Container : Vector; Item : Element_Type) return Boolean; This paragraph was deleted. procedure Iterate (Container : in Vector; Process : not null access procedure (Position : in Cursor)); procedure Reverse_Iterate (Container : in Vector; Process : not null access procedure (Position : in Cursor)); function Iterate (Container : in Vector) return Vector_Iterator_Interfaces.Reversible_Iterator'Class; function Iterate (Container : in Vector; Start : in Cursor) return Vector_Iterator_Interfaces.Reversible_Iterator'Class; generic with function "<" (Left, Right : Element_Type) return Boolean is <>; package Generic_Sorting is function Is_Sorted (Container : Vector) return Boolean; procedure Sort (Container : in out Vector); procedure Merge (Target : in out Vector; Source : in out Vector); end Generic_Sorting; private 56/2 57/2 58/2 59/2 60/2 61/2 62/2 63/2 64/2 65/2 66/2 67/2 68/2 69/2 70/2 71/2 72/3 73/2 74/2 74.1/3 74.2/3 75/2 76/2 77/2 78/2 79/2 80/2 479 13 December 2012 The Generic Package Containers.Vectors A.18.2 81/2 82/2 83/2 Ada Reference Manual — 2012 Edition ... -- not specified by the language end Ada.Containers.Vectors; The actual function for the generic formal function "=" on Element_Type values is expected to define a reflexive and symmetric relationship and return the same result value each time it is called with a particular pair of values. If it behaves in some other manner, the functions defined to use it return an unspecified value. The exact arguments and number of calls of this generic formal function by the functions defined to use it are unspecified. 84/2 The type Vector is used to represent vectors. The type Vector needs finalization (see 7.6). 85/2 86/2 87/2 88/2 Empty_Vector represents the empty vector object. It has a length of 0. If an object of type Vector is not otherwise initialized, it is initialized to the same value as Empty_Vector. No_Element represents a cursor that designates no element. If an object of type Cursor is not otherwise initialized, it is initialized to the same value as No_Element. The predefined "=" operator for type Cursor returns True if both cursors are No_Element, or designate the same element in the same container. Execution of the default implementation of the Input, Output, Read, or Write attribute of type Cursor raises Program_Error. 88.1/3 Vector'Write for a Vector object V writes Length(V) elements of the vector to the stream. It also may write additional information about the vector. 88.2/3 Vector'Read reads the representation of a vector from the stream, and assigns to Item a vector with the same length and elements as was written by Vector'Write. 89/2 No_Index represents a position that does not correspond to any element. The subtype Extended_Index includes the indices covered by Index_Type plus the value No_Index and, if it exists, the successor to the Index_Type'Last. 89.1/3 If an operation attempts to modify the vector such that the position of the last element would be greater than Index_Type'Last, then the operation propagates Constraint_Error. 90/2 91/2 92/2 93/2 93.1/3 94/2 95/2 96/2 Some operations of this generic package have access-to-subprogram parameters. To ensure such operations are well-defined, they guard against certain actions by the designated subprogram. In particular, some operations check for “tampering with cursors” of a container because they depend on the set of elements of the container remaining constant, and others check for “tampering with elements” of a container because they depend on elements of the container not being replaced. A subprogram is said to tamper with cursors of a vector object V if: • • • • it inserts or deletes elements of V, that is, it calls the Insert, Insert_Space, Clear, Delete, or Set_Length procedures with V as a parameter; or it finalizes V; or it calls the Assign procedure with V as the Target parameter; or it calls the Move procedure with V as a parameter. A subprogram is said to tamper with elements of a vector object V if: • it tampers with cursors of V; or A.18.2 The Generic Package Containers.Vectors 13 December 2012 480 Ada Reference Manual — 2012 Edition • it replaces one or more elements of V, that is, it calls the Replace_Element, Reverse_Elements, or Swap procedures or the Sort or Merge procedures of an instance of Generic_Sorting with V as a parameter. When tampering with cursors is prohibited for a particular vector object V, Program_Error is propagated by a call of any language-defined subprogram that is defined to tamper with the cursors of V, leaving V unmodified. Similarly, when tampering with elements is prohibited for a particular vector object V, Program_Error is propagated by a call of any language-defined subprogram that is defined to tamper with the elements of V (or tamper with the cursors of V), leaving V unmodified. function Has_Element (Position : Cursor) return Boolean; Returns True if Position designates an element, and returns False otherwise. function "=" (Left, Right : Vector) return Boolean; If Left and Right denote the same vector object, then the function returns True. If Left and Right have different lengths, then the function returns False. Otherwise, it compares each element in Left to the corresponding element in Right using the generic formal equality operator. If any such comparison returns False, the function returns False; otherwise, it returns True. Any exception raised during evaluation of element equality is propagated. function To_Vector (Length : Count_Type) return Vector; Returns a vector with a length of Length, filled with empty elements. function To_Vector (New_Item : Element_Type; Length : Count_Type) return Vector; 97/2 97.1/3 97.2/3 97.3/3 98/2 99/3 100/2 101/2 102/2 Returns a vector with a length of Length, filled with elements initialized to the value New_Item. 103/2 function "&" (Left, Right : Vector) return Vector; Returns a vector comprising the elements of Left followed by the elements of Right. function "&" (Left : Vector; Right : Element_Type) return Vector; Returns a vector comprising the elements of Left followed by the element Right. function "&" (Left : Element_Type; Right : Vector) return Vector; Returns a vector comprising the element Left followed by the elements of Right. function "&" (Left, Right : Element_Type) return Vector; Returns a vector comprising the element Left followed by the element Right. function Capacity (Container : Vector) return Count_Type; Returns the capacity of Container. procedure Reserve_Capacity (Container : in out Vector; Capacity : in Count_Type); If the capacity of Container is already greater than or equal to Capacity, then Reserve_Capacity has no effect. Otherwise, Reserve_Capacity allocates additional storage as necessary to ensure that the length of the resulting vector can become at least the value Capacity without requiring an additional call to Reserve_Capacity, and is large enough to hold the current length of Container. Reserve_Capacity then, as necessary, moves elements into the new storage and 481 13 December 2012 The Generic Package Containers.Vectors A.18.2 104/2 105/2 106/2 107/2 108/2 109/2 110/2 111/2 112/2 113/2 114/2 115/3 Ada Reference Manual — 2012 Edition deallocates any storage no longer needed. Any exception raised during allocation is propagated and Container is not modified. function Length (Container : Vector) return Count_Type; Returns the number of elements in Container. procedure Set_Length (Container : in out Vector; Length : in Count_Type); If Length is larger than the capacity of Container, Set_Length calls Reserve_Capacity (Container, Length), then sets the length of the Container to Length. If Length is greater than the original length of Container, empty elements are added to Container; otherwise, elements are removed from Container. function Is_Empty (Container : Vector) return Boolean; Equivalent to Length (Container) = 0. procedure Clear (Container : in out Vector); Removes all the elements from Container. The capacity of Container does not change. function To_Cursor (Container : Vector; Index : Extended_Index) return Cursor; If Index is not in the range First_Index (Container) .. Last_Index (Container), then No_Element is returned. Otherwise, a cursor designating the element at position Index in Container is returned. function To_Index (Position : Cursor) return Extended_Index; If Position is No_Element, No_Index is returned. Otherwise, the index (within its containing vector) of the element designated by Position is returned. function Element (Container : Vector; Index : Index_Type) return Element_Type; If Index is not in the range First_Index (Container) Constraint_Error is propagated. Otherwise, Element returns the element at position Index. .. Last_Index (Container), then function Element (Position : Cursor) return Element_Type; If Position equals No_Element, then Constraint_Error is propagated. Otherwise, Element returns the element designated by Position. procedure Replace_Element (Container : in out Vector; Index : in Index_Type; New_Item : in Element_Type); If Index is not in the range First_Index (Container) .. Last_Index (Container), then Constraint_Error is propagated. Otherwise, Replace_Element assigns the value New_Item to the element at position Index. Any exception raised during the assignment is propagated. The element at position Index is not an empty element after successful call to Replace_Element. procedure Replace_Element (Container : in out Vector; Position : in Cursor; New_Item : in Element_Type); If Position equals No_Element, then Constraint_Error is propagated; if Position does not is propagated. Otherwise, designate an element then Program_Error in Container, 116/2 117/2 118/2 119/3 120/2 121/2 122/2 123/2 124/2 125/2 126/2 127/2 128/2 129/2 130/2 131/2 132/2 133/3 134/2 135/3 A.18.2 The Generic Package Containers.Vectors 13 December 2012 482 Ada Reference Manual — 2012 Edition Replace_Element assigns New_Item to the element designated by Position. Any exception raised during the assignment is propagated. The element at Position is not an empty element after successful call to Replace_Element. procedure Query_Element (Container : in Vector; Index : in Index_Type; Process : not null access procedure (Element : in Element_Type)); .. Last_Index (Container), then If Index is not in the range First_Index (Container) Constraint_Error is propagated. Otherwise, Query_Element calls Process.all with the element at position Index as the argument. Tampering with the elements of Container is prohibited during the execution of the call on Process.all. Any exception raised by Process.all is propagated. procedure Query_Element (Position : in Cursor; Process : not null access procedure (Element : in Element_Type)); If Position equals No_Element, then Constraint_Error is propagated. Otherwise, Query_Element calls Process.all with the element designated by Position as the argument. Tampering with the elements of the vector that contains the element designated by Position is prohibited during the execution of the call on Process.all. Any exception raised by Process.all is propagated. procedure Update_Element (Container : in out Vector; Index : in Index_Type; Process : not null access procedure (Element : in out Element_Type)); If Index is not in the range First_Index (Container) .. Last_Index (Container), then Constraint_Error is propagated. Otherwise, Update_Element calls Process.all with the element at position Index as the argument. Tampering with the elements of Container is prohibited during the execution of the call on Process.all. Any exception raised by Process.all is propagated. If Element_Type is unconstrained and definite, then the actual Element parameter of Process.all shall be unconstrained. The element at position Index is not an empty element after successful completion of this operation. procedure Update_Element (Container : in out Vector; Position : in Cursor; Process : not null access procedure (Element : in out Element_Type)); If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element is propagated. Otherwise, Update_Element calls Process.all with the element designated by Position as the argument. Tampering with the elements of Container is prohibited during the execution of the call on Process.all. Any exception raised by Process.all is propagated. then Program_Error in Container, If Element_Type is unconstrained and definite, then the actual Element parameter of Process.all shall be unconstrained. The element designated by Position is not an empty element after successful completion of this operation. type Constant_Reference_Type (Element : not null access constant Element_Type) is private with Implicit_Dereference => Element; 483 13 December 2012 The Generic Package Containers.Vectors A.18.2 136/2 137/3 138/2 139/3 140/2 141/3 142/2 143/2 144/2 145/3 146/2 147/2 147.1/3 147.2/3 147.3/3 147.4/3 147.5/3 147.6/3 147.7/3 147.8/3 147.9/3 147.10/3 147.11/3 147.12/3 147.13/3 147.14/3 147.15/3 147.16/3 Ada Reference Manual — 2012 Edition type Reference_Type (Element : not null access Element_Type) is private with Implicit_Dereference => Element; The types Constant_Reference_Type and Reference_Type need finalization. The default initialization of an object of type Constant_Reference_Type or Reference_Type propagates Program_Error. function Constant_Reference (Container : aliased in Vector; Index : in Index_Type) return Constant_Reference_Type; This function (combined with the Constant_Indexing and Implicit_Dereference aspects) provides a convenient way to gain read access to an individual element of a vector given an index value. .. Last_Index (Container), then If Index is not in the range First_Index (Container) Constraint_Error is propagated. Otherwise, Constant_Reference returns an object whose discriminant is an access value that designates the element at position Index. Tampering with the elements of Container is prohibited while the object returned by Constant_Reference exists and has not been finalized. function Reference (Container : aliased in out Vector; Index : in Index_Type) return Reference_Type; This function (combined with the Variable_Indexing and Implicit_Dereference aspects) provides a convenient way to gain read and write access to an individual element of a vector given an index value. If Index is not in the range First_Index (Container) .. Last_Index (Container), then Constraint_Error is propagated. Otherwise, Reference returns an object whose discriminant is an access value that designates the element at position Index. Tampering with the elements of Container is prohibited while the object returned by Reference exists and has not been finalized. The element at position Index is not an empty element after successful completion of this operation. function Constant_Reference (Container : aliased in Vector; Position : in Cursor) return Constant_Reference_Type; This function (combined with the Constant_Indexing and Implicit_Dereference aspects) provides a convenient way to gain read access to an individual element of a vector given a cursor. If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element is propagated. Otherwise, Constant_Reference returns an object whose discriminant is an access value that designates the element designated by Position. Tampering with the elements of Container is prohibited while the object returned by Constant_Reference exists and has not been finalized. then Program_Error in Container, function Reference (Container : aliased in out Vector; Position : in Cursor) return Reference_Type; This function (combined with the Variable_Indexing and Implicit_Dereference aspects) provides a convenient way to gain read and write access to an individual element of a vector given a cursor. A.18.2 The Generic Package Containers.Vectors 13 December 2012 484 Ada Reference Manual — 2012 Edition If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element in Container, then Program_Error is propagated. Otherwise, Reference returns an object whose discriminant is an access value that designates the element designated by Position. Tampering with the elements of Container is prohibited while the object returned by Reference exists and has not been finalized. 147.17/3 The element designated by Position is not an empty element after successful completion of this operation. 147.18/3 procedure Assign (Target : in out Vector; Source : in Vector); If Target denotes the same object as Source, the operation has no effect. If the length of Source is greater than the capacity of Target, Reserve_Capacity (Target, Length (Source)) is called. The elements of Source are then copied to Target as for an assignment_statement assigning Source to Target (this includes setting the length of Target to be that of Source). function Copy (Source : Vector; Capacity : Count_Type := 0) return Vector; Returns a vector whose elements are initialized from the corresponding elements of Source. If Capacity is 0, then the vector capacity is the length of Source; if Capacity is equal to or greater than the length of Source, the vector capacity is at least the specified value. Otherwise, the operation propagates Capacity_Error. procedure Move (Target : in out Vector; Source : in out Vector); If Target denotes the same object as Source, then the operation has no effect. Otherwise, Move first calls Reserve_Capacity (Target, Length (Source)) and then Clear (Target); then, each element from Source is removed from Source and inserted into Target in the original order. The length of Source is 0 after a successful call to Move. procedure Insert (Container : in out Vector; Before : in Extended_Index; New_Item : in Vector); If Before is not in the range First_Index (Container) .. Last_Index (Container) + 1, then Constraint_Error is propagated. If Length(New_Item) is 0, then Insert does nothing. Otherwise, it computes the new length NL as the sum of the current length and Length (New_Item); if the value of Last appropriate for length NL would be greater than Index_Type'Last, then Constraint_Error is propagated. If the current vector capacity is less than NL, Reserve_Capacity (Container, NL) is called to increase the vector capacity. Then Insert slides the elements in the range Before .. Last_Index (Container) up by Length(New_Item) positions, and then copies the elements of New_Item to the positions starting at Before. Any exception raised during the copying is propagated. procedure Insert (Container : in out Vector; Before : in Cursor; New_Item : in Vector); If Before is not No_Element, and does not designate an element in Container, then Program_Error is propagated. Otherwise, if Length(New_Item) is 0, then Insert does nothing. If Before is No_Element, then the call is equivalent to Insert (Container, Last_Index (Container) + 1, New_Item); otherwise, the call is equivalent to Insert (Container, To_Index (Before), New_Item); 147.19/3 147.20/3 147.21/3 147.22/3 148/2 149/3 150/2 151/3 152/2 153/2 154/3 485 13 December 2012 The Generic Package Containers.Vectors A.18.2 Ada Reference Manual — 2012 Edition procedure Insert (Container : in out Vector; Before : in Cursor; New_Item : in Vector; Position : out Cursor); If Before is not No_Element, and does not designate an element in Container, then Program_Error is propagated. If Before equals No_Element, then let T be Last_Index (Container) + 1; otherwise, let T be To_Index (Before). Insert (Container, T, New_Item) is called, and then Position is set to To_Cursor (Container, T). procedure Insert (Container : in out Vector; Before : in Extended_Index; New_Item : in Element_Type; Count : in Count_Type := 1); Equivalent to Insert (Container, Before, To_Vector (New_Item, Count)); procedure Insert (Container : in out Vector; Before : in Cursor; New_Item : in Element_Type; Count : in Count_Type := 1); Equivalent to Insert (Container, Before, To_Vector (New_Item, Count)); procedure Insert (Container : in out Vector; Before : in Cursor; New_Item : in Element_Type; Position : out Cursor; Count : in Count_Type := 1); Equivalent to Insert (Container, Before, To_Vector (New_Item, Count), Position); procedure Insert (Container : in out Vector; Before : in Extended_Index; Count : in Count_Type := 1); If Before is not in the range First_Index (Container) .. Last_Index (Container) + 1, then Constraint_Error is propagated. If Count is 0, then Insert does nothing. Otherwise, it computes the new length NL as the sum of the current length and Count; if the value of Last appropriate for length NL would be greater than Index_Type'Last, then Constraint_Error is propagated. If the current vector capacity is less than NL, Reserve_Capacity (Container, NL) is called to increase the vector capacity. Then Insert slides the elements in the range Before .. Last_Index (Container) up by Count positions, and then inserts elements that are initialized by default (see 3.3.1) in the positions starting at Before. procedure Insert (Container : in out Vector; Before : in Cursor; Position : out Cursor; Count : in Count_Type := 1); If Before is not No_Element, and does not designate an element in Container, then Program_Error is propagated. If Before equals No_Element, then let T be Last_Index (Container) + 1; otherwise, let T be To_Index (Before). Insert (Container, T, Count) is called, and then Position is set to To_Cursor (Container, T). procedure Prepend (Container : in out Vector; New_Item : in Vector; Count : in Count_Type := 1); Equivalent to Insert (Container, First_Index (Container), New_Item). 155/2 156/2 157/2 158/2 159/2 160/2 161/2 162/2 163/2 164/3 165/2 166/2 167/2 168/2 169/2 A.18.2 The Generic Package Containers.Vectors 13 December 2012 486 Ada Reference Manual — 2012 Edition procedure Prepend (Container : in out Vector; New_Item : in Element_Type; Count : in Count_Type := 1); Equivalent to Insert (Container, First_Index (Container), New_Item, Count). procedure Append (Container : in out Vector; New_Item : in Vector); Equivalent to Insert (Container, Last_Index (Container) + 1, New_Item). procedure Append (Container : in out Vector; New_Item : in Element_Type; Count : in Count_Type := 1); Equivalent to Insert (Container, Last_Index (Container) + 1, New_Item, Count). procedure Insert_Space (Container : in out Vector; Before : in Extended_Index; Count : in Count_Type := 1); If Before is not in the range First_Index (Container) .. Last_Index (Container) + 1, then Constraint_Error is propagated. If Count is 0, then Insert_Space does nothing. Otherwise, it computes the new length NL as the sum of the current length and Count; if the value of Last appropriate for length NL would be greater than Index_Type'Last, then Constraint_Error is propagated. If the current vector capacity is less than NL, Reserve_Capacity (Container, NL) is called to increase the vector capacity. Then Insert_Space slides the elements in the range Before .. Last_Index (Container) up by Count positions, and then inserts empty elements in the positions starting at Before. procedure Insert_Space (Container : in out Vector; Before : in Cursor; Position : out Cursor; Count : in Count_Type := 1); If Before is not No_Element, and does not designate an element in Container, then Program_Error is propagated. If Before equals No_Element, then let T be Last_Index (Container) + 1; otherwise, let T be To_Index (Before). Insert_Space (Container, T, Count) is called, and then Position is set to To_Cursor (Container, T). procedure Delete (Container : in out Vector; Index : in Extended_Index; Count : in Count_Type := 1); If Index is not in the range First_Index (Container) .. Last_Index (Container) + 1, then Constraint_Error is propagated. If Count is 0, Delete has no effect. Otherwise, Delete slides the elements (if any) starting at position Index + Count down to Index. Any exception raised during element assignment is propagated. procedure Delete (Container : in out Vector; Position : in out Cursor; Count : in Count_Type := 1); If Position equals No_Element, then Constraint_Error is propagated. If Position does not designate an element in Container, then Program_Error is propagated. Otherwise, Delete (Container, To_Index (Position), Count) is called, and then Position is set to No_Element. 170/2 171/2 172/2 173/2 174/2 175/2 176/2 177/3 178/2 179/2 180/2 181/2 182/3 183/2 184/2 487 13 December 2012 The Generic Package Containers.Vectors A.18.2 Ada Reference Manual — 2012 Edition 185/2 186/2 187/2 188/3 189/2 190/2 191/2 192/2 193/2 194/2 195/2 196/2 197/2 198/2 199/2 200/2 201/2 202/2 203/2 204/2 205/2 206/2 207/2 208/2 procedure Delete_First (Container : in out Vector; Count : in Count_Type := 1); Equivalent to Delete (Container, First_Index (Container), Count). procedure Delete_Last (Container : in out Vector; Count : in Count_Type := 1); If Length (Container) <= Count, then Delete_Last is equivalent to Clear (Container). Otherwise, it is equivalent to Delete (Container, Index_Type'Val(Index_Type'Pos(Last_Index (Container)) – Count + 1), Count). procedure Reverse_Elements (Container : in out Vector); Reorders the elements of Container in reverse order. procedure Swap (Container : in out Vector; I, J : in Index_Type); If either I or J is not in the range First_Index (Container) .. Last_Index (Container), then Constraint_Error is propagated. Otherwise, Swap exchanges the values of the elements at positions I and J. procedure Swap (Container : in out Vector; I, J : in Cursor); If either I or J is No_Element, then Constraint_Error is propagated. If either I or J do not designate an element in Container, then Program_Error is propagated. Otherwise, Swap exchanges the values of the elements designated by I and J. function First_Index (Container : Vector) return Index_Type; Returns the value Index_Type'First. function First (Container : Vector) return Cursor; If Container is empty, First returns No_Element. Otherwise, it returns a cursor that designates the first element in Container. function First_Element (Container : Vector) return Element_Type; Equivalent to Element (Container, First_Index (Container)). function Last_Index (Container : Vector) return Extended_Index; If Container is empty, Last_Index returns No_Index. Otherwise, it returns the position of the last element in Container. function Last (Container : Vector) return Cursor; If Container is empty, Last returns No_Element. Otherwise, it returns a cursor that designates the last element in Container. function Last_Element (Container : Vector) return Element_Type; Equivalent to Element (Container, Last_Index (Container)). function Next (Position : Cursor) return Cursor; If Position equals No_Element or designates the last element of the container, then Next returns the value No_Element. Otherwise, it returns a cursor that designates the element with index To_Index (Position) + 1 in the same vector as Position. A.18.2 The Generic Package Containers.Vectors 13 December 2012 488 Ada Reference Manual — 2012 Edition procedure Next (Position : in out Cursor); Equivalent to Position := Next (Position). function Previous (Position : Cursor) return Cursor; If Position equals No_Element or designates the first element of the container, then Previous returns the value No_Element. Otherwise, it returns a cursor that designates the element with index To_Index (Position) – 1 in the same vector as Position. procedure Previous (Position : in out Cursor); Equivalent to Position := Previous (Position). function Find_Index (Container : Vector; Item : Element_Type; Index : Index_Type := Index_Type'First) return Extended_Index; Searches the elements of Container for an element equal to Item (using the generic formal equality operator). The search starts at position Index and proceeds towards Last_Index (Container). If no equal element is found, then Find_Index returns No_Index. Otherwise, it returns the index of the first equal element encountered. function Find (Container : Vector; Item : Element_Type; Position : Cursor := No_Element) return Cursor; If Position is not No_Element, and does not designate an element in Container, then Program_Error is propagated. Otherwise, Find searches the elements of Container for an element equal to Item (using the generic formal equality operator). The search starts at the first element if Position equals No_Element, and at the element designated by Position otherwise. It proceeds towards the last element of Container. If no equal element is found, then Find returns No_Element. Otherwise, it returns a cursor designating the first equal element encountered. function Reverse_Find_Index (Container : Vector; Item : Element_Type; Index : Index_Type := Index_Type'Last) return Extended_Index; Searches the elements of Container for an element equal to Item (using the generic formal equality operator). The search starts at position Index or, if Index is greater than Last_Index (Container), at position Last_Index (Container). It proceeds towards First_Index (Container). If no equal element is found, then Reverse_Find_Index returns No_Index. Otherwise, it returns the index of the first equal element encountered. function Reverse_Find (Container : Vector; Item : Element_Type; Position : Cursor := No_Element) return Cursor; If Position is not No_Element, and does not designate an element in Container, then Program_Error is propagated. Otherwise, Reverse_Find searches the elements of Container for an element equal to Item (using the generic formal equality operator). The search starts at the last element if Position equals No_Element, and at the element designated by Position otherwise. It proceeds towards the first element of Container. If no equal element is found, then Reverse_Find returns No_Element. Otherwise, it returns a cursor designating the first equal element encountered. 209/2 210/2 211/2 212/2 213/2 214/2 215/2 216/2 217/2 218/3 219/2 220/2 221/2 222/3 489 13 December 2012 The Generic Package Containers.Vectors A.18.2 Ada Reference Manual — 2012 Edition 223/2 224/2 227/2 228/3 229/2 230/3 230.1/3 230.2/3 230.3/3 230.4/3 231/3 232/2 233/2 function Contains (Container : Vector; Item : Element_Type) return Boolean; Equivalent to Has_Element (Find (Container, Item)). Paragraphs 225 and 226 were moved above. procedure Iterate (Container : in Vector; Process : not null access procedure (Position : in Cursor)); Invokes Process.all with a cursor that designates each element in Container, in index order. Tampering with the cursors of Container is prohibited during the execution of a call on Process.all. Any exception raised by Process.all is propagated. procedure Reverse_Iterate (Container : in Vector; Process : not null access procedure (Position : in Cursor)); Iterates over the elements in Container as per procedure Iterate, except that elements are traversed in reverse index order. function Iterate (Container : in Vector) return Vector_Iterator_Interfaces.Reversible_Iterator'Class; Iterate returns a reversible iterator object (see 5.5.1) that will generate a value for a loop parameter (see 5.5.2) designating each node in Container, starting with the first node and moving the cursor as per the Next function when used as a forward iterator, and starting with the last node and moving the cursor as per the Previous function when used as a reverse iterator. Tampering with the cursors of Container is prohibited while the iterator object exists (in particular, in the sequence_of_statements of the loop_statement whose iterator_specification denotes this object). The iterator object needs finalization. function Iterate (Container : in Vector; Start : in Cursor) return Vector_Iterator_Interfaces.Reversible_Iterator'Class; If Start is not No_Element and does not designate an item in Container, then Program_Error is propagated. If Start is No_Element, then Constraint_Error is propagated. Otherwise, Iterate returns a reversible iterator object (see 5.5.1) that will generate a value for a loop parameter (see 5.5.2) designating each node in Container, starting with the node designated by Start and moving the cursor as per the Next function when used as a forward iterator, or moving the cursor as per the Previous function when used as a reverse iterator. Tampering with the cursors of Container is prohibited while the iterator object exists (in particular, in the sequence_of_statements of the loop_statement whose iterator_specification denotes this object). The iterator object needs finalization. The actual function for the generic formal function "<" of Generic_Sorting is expected to return the same value each time it is called with a particular pair of element values. It should define a strict weak ordering relationship (see A.18); it should not modify Container. If the actual for "<" behaves in some other manner, the behavior of the subprograms of Generic_Sorting are unspecified. The number of times the subprograms of Generic_Sorting call "<" is unspecified. function Is_Sorted (Container : Vector) return Boolean; Returns True if the elements are sorted smallest first as determined by the generic formal "<" operator; otherwise, Is_Sorted returns False. Any exception raised during evaluation of "<" is propagated. A.18.2 The Generic Package Containers.Vectors 13 December 2012 490 Ada Reference Manual — 2012 Edition procedure Sort (Container : in out Vector); Reorders the elements of Container such that the elements are sorted smallest first as determined by the generic formal "<" operator provided. Any exception raised during evaluation of "<" is propagated. procedure Merge (Target : in out Vector; Source : in out Vector); If Source is empty, then Merge does nothing. If Source and Target are the same nonempty container object, then Program_Error is propagated. Otherwise, Merge removes elements from Source and inserts them into Target; afterwards, Target contains the union of the elements that were initially in Source and Target; Source is left empty. If Target and Source are initially sorted smallest first, then Target is ordered smallest first as determined by the generic formal "<" operator; otherwise, the order of elements in Target is unspecified. Any exception raised during evaluation of "<" is propagated. 234/2 235/2 236/2 237/3 Bounded (Run-Time) Errors Reading the value of an empty element by calling Element, Query_Element, Update_Element, Constant_Reference, Reference, Swap, Is_Sorted, Sort, Merge, "=", Find, or Reverse_Find is a bounded error. The implementation may treat the element as having any normal value (see 13.9.1) of the element type, or raise Constraint_Error or Program_Error before modifying the vector. 238/3 Calling Merge in an instance of Generic_Sorting with either Source or Target not ordered smallest first using the provided generic formal "<" operator is a bounded error. Either Program_Error is raised after Target is updated as described for Merge, or the operation works as defined. 239/2 It is a bounded error for the actual function associated with a generic formal subprogram, when called as part of an operation of this package, to tamper with elements of any Vector parameter of the operation. Either Program_Error is raised, or the operation works as defined on the value of the Vector either prior to, or subsequent to, some or all of the modifications to the Vector. It is a bounded error to call any subprogram declared in the visible part of Containers.Vectors when the associated container has been finalized. If the operation takes Container as an in out parameter, then it raises Constraint_Error or Program_Error. Otherwise, the operation either proceeds as it would for an empty container, or it raises Constraint_Error or Program_Error. A Cursor value is ambiguous if any of the following have occurred since it was created: • Insert, Insert_Space, or Delete has been called on the vector that contains the element the cursor designates with an index value (or a cursor designating an element at such an index value) less than or equal to the index value of the element designated by the cursor; or • The vector that contains the element it designates has been passed to the Sort or Merge procedures of an instance of Generic_Sorting, or to the Reverse_Elements procedure. It is a bounded error to call any subprogram other than "=" or Has_Element declared in Containers.Vectors with an ambiguous (but not invalid, see below) cursor parameter. Possible results are: • The cursor may be treated as if it were No_Element; • The cursor may designate some element in the vector (but not necessarily the element that it originally designated); • Constraint_Error may be raised; or • Program_Error may be raised. 239.1/3 239.2/3 240/2 241/2 242/2 243/2 244/2 245/2 246/2 247/2 491 13 December 2012 The Generic Package Containers.Vectors A.18.2 Ada Reference Manual — 2012 Edition Erroneous Execution 248/2 A Cursor value is invalid if any of the following have occurred since it was created: 249/2 249.1/3 • The vector that contains the element it designates has been finalized; • The vector that contains the element it designates has been used as the Target of a call to Assign, or as the target of an assignment_statement; 250/2 • The vector that contains the element it designates has been used as the Source or Target of a call to Move; or 251/3 • The element it designates has been deleted or removed from the vector that previously contained the element. 252/2 The result of "=" or Has_Element is unspecified if it is called with an invalid cursor parameter. Execution is erroneous if any other subprogram declared in Containers.Vectors is called with an invalid cursor parameter. 252.1/3 Execution is erroneous if the vector associated with the result of a call to Reference or Constant_Reference is finalized before the result object returned by the call to Reference or Constant_Reference is finalized. 253/2 No storage associated with a vector object shall be lost upon assignment or scope exit. Implementation Requirements 254/3 The execution of an assignment_statement for a vector shall have the effect of copying the elements from the source vector object to the target vector object and changing the length of the target object to that of the source object. Implementation Advice 255/2 256/2 257/2 Containers.Vectors should be implemented similarly to an array. In particular, if the length of a vector is N, then • • the worst-case time complexity of Append with Count=1 when N is less than the capacity of the vector should be O(log N); and the worst-case time complexity of Element should be O(log N); 258/2 • the worst-case time complexity of Prepend with Count=1 and Delete_First with Count=1 should be O(N log N). 259/2 The worst-case instance of Containers.Vectors.Generic_Sorting should be O(N**2), and the average time complexity should be better than O(N**2). call on procedure Sort of complexity of time an a 260/2 Containers.Vectors.Generic_Sorting.Sort and Containers.Vectors.Generic_Sorting.Merge should minimize copying of elements. 261/2 Move should not copy elements, and should minimize copying of internal data structures. 262/2 If an exception is propagated from a vector operation, no storage should be lost, nor any elements removed from a vector unless specified by the operation. 263/2 264/2 NOTES 48 All elements of a vector occupy locations in the internal array. If a sparse container is required, a Hashed_Map should be used rather than a vector. 49 If Index_Type'Base'First = Index_Type'First an instance of Ada.Containers.Vectors will raise Constraint_Error. A value below Index_Type'First is required so that an empty vector has a meaningful value of Last_Index. A.18.2 The Generic Package Containers.Vectors 13 December 2012 492 Ada Reference Manual — 2012 Edition A.18.3 The Generic Package Containers.Doubly_Linked_Lists The language-defined generic package Containers.Doubly_Linked_Lists provides private types List and Cursor, and a set of operations for each type. A list container is optimized for insertion and deletion at any position. A doubly-linked list container object manages a linked list of internal nodes, each of which contains an element and pointers to the next (successor) and previous (predecessor) internal nodes. A cursor designates a particular node within a list (and by extension the element contained in that node). A cursor keeps designating the same node (and element) as long as the node is part of the container, even if the node is moved in the container. The length of a list is the number of elements it contains. The generic library package Containers.Doubly_Linked_Lists has the following declaration: Static Semantics with Ada.Iterator_Interfaces; generic type Element_Type is private; with function "=" (Left, Right : Element_Type) return Boolean is <>; package Ada.Containers.Doubly_Linked_Lists is pragma Preelaborate(Doubly_Linked_Lists); pragma Remote_Types(Doubly_Linked_Lists); type List is tagged private with Constant_Indexing => Constant_Reference, Variable_Indexing => Reference, Default_Iterator => Iterate, Iterator_Element => Element_Type; pragma Preelaborable_Initialization(List); type Cursor is private; pragma Preelaborable_Initialization(Cursor); Empty_List : constant List; No_Element : constant Cursor; function Has_Element (Position : Cursor) return Boolean; package List_Iterator_Interfaces is new Ada.Iterator_Interfaces (Cursor, Has_Element); function "=" (Left, Right : List) return Boolean; function Length (Container : List) return Count_Type; function Is_Empty (Container : List) return Boolean; procedure Clear (Container : in out List); function Element (Position : Cursor) return Element_Type; procedure Replace_Element (Container : in out List; Position : in Cursor; New_Item : in Element_Type); procedure Query_Element (Position : in Cursor; Process : not null access procedure (Element : in Element_Type)); procedure Update_Element (Container : in out List; Position : in Cursor; Process : not null access procedure (Element : in out Element_Type)); 1/2 2/2 3/2 4/2 5/3 6/3 7/2 8/2 9/2 9.1/3 9.2/3 10/2 11/2 12/2 13/2 14/2 15/2 16/2 17/2 493 13 December 2012 The Generic Package Containers.Doubly_Linked_Lists A.18.3 Ada Reference Manual — 2012 Edition 17.1/3 17.2/3 17.3/3 17.4/3 17.5/3 17.6/3 18/2 19/2 20/2 21/2 22/2 23/2 24/2 25/2 26/2 27/2 28/2 29/2 30/2 31/2 32/2 type Constant_Reference_Type (Element : not null access constant Element_Type) is private with Implicit_Dereference => Element; type Reference_Type (Element : not null access Element_Type) is private with Implicit_Dereference => Element; function Constant_Reference (Container : aliased in List; Position : in Cursor) return Constant_Reference_Type; function Reference (Container : aliased in out List; Position : in Cursor) return Reference_Type; procedure Assign (Target : in out List; Source : in List); function Copy (Source : List) return List; procedure Move (Target : in out List; Source : in out List); procedure Insert (Container : in out List; Before : in Cursor; New_Item : in Element_Type; Count : in Count_Type := 1); procedure Insert (Container : in out List; Before : in Cursor; New_Item : in Element_Type; Position : out Cursor; Count : in Count_Type := 1); procedure Insert (Container : in out List; Before : in Cursor; Position : out Cursor; Count : in Count_Type := 1); procedure Prepend (Container : in out List; New_Item : in Element_Type; Count : in Count_Type := 1); procedure Append (Container : in out List; New_Item : in Element_Type; Count : in Count_Type := 1); procedure Delete (Container : in out List; Position : in out Cursor; Count : in Count_Type := 1); procedure Delete_First (Container : in out List; Count : in Count_Type := 1); procedure Delete_Last (Container : in out List; Count : in Count_Type := 1); procedure Reverse_Elements (Container : in out List); procedure Swap (Container : in out List; I, J : in Cursor); procedure Swap_Links (Container : in out List; I, J : in Cursor); procedure Splice (Target : in out List; Before : in Cursor; Source : in out List); procedure Splice (Target : in out List; Before : in Cursor; Source : in out List; Position : in out Cursor); procedure Splice (Container: in out List; Before : in Cursor; Position : in Cursor); A.18.3 The Generic Package Containers.Doubly_Linked_Lists 13 December 2012 494 Ada Reference Manual — 2012 Edition function First (Container : List) return Cursor; function First_Element (Container : List) return Element_Type; function Last (Container : List) return Cursor; function Last_Element (Container : List) return Element_Type; function Next (Position : Cursor) return Cursor; function Previous (Position : Cursor) return Cursor; procedure Next (Position : in out Cursor); procedure Previous (Position : in out Cursor); function Find (Container : List; Item : Element_Type; Position : Cursor := No_Element) return Cursor; function Reverse_Find (Container : List; Item : Element_Type; Position : Cursor := No_Element) return Cursor; function Contains (Container : List; Item : Element_Type) return Boolean; This paragraph was deleted. procedure Iterate (Container : in List; Process : not null access procedure (Position : in Cursor)); procedure Reverse_Iterate (Container : in List; Process : not null access procedure (Position : in Cursor)); function Iterate (Container : in List) return List_Iterator_Interfaces.Reversible_Iterator'Class; function Iterate (Container : in List; Start : in Cursor) return List_Iterator_Interfaces.Reversible_Iterator'Class; generic with function "<" (Left, Right : Element_Type) return Boolean is <>; package Generic_Sorting is function Is_Sorted (Container : List) return Boolean; procedure Sort (Container : in out List); procedure Merge (Target : in out List; Source : in out List); end Generic_Sorting; private ... -- not specified by the language end Ada.Containers.Doubly_Linked_Lists; The actual function for the generic formal function "=" on Element_Type values is expected to define a reflexive and symmetric relationship and return the same result value each time it is called with a particular pair of values. If it behaves in some other manner, the functions Find, Reverse_Find, and "=" on list values return an unspecified value. The exact arguments and number of calls of this generic formal function by the functions Find, Reverse_Find, and "=" on list values are unspecified. The type List is used to represent lists. The type List needs finalization (see 7.6). Empty_List represents the empty List object. It has a length of 0. If an object of type List is not otherwise initialized, it is initialized to the same value as Empty_List. 495 13 December 2012 The Generic Package Containers.Doubly_Linked_Lists A.18.3 33/2 34/2 35/2 36/2 37/2 38/2 39/2 40/2 41/2 42/2 43/2 44/3 45/2 46/2 46.1/3 46.2/3 47/2 48/2 49/2 50/2 51/2 52/2 53/2 54/2 55/2 56/2 57/2 Ada Reference Manual — 2012 Edition 58/2 59/2 60/2 No_Element represents a cursor that designates no element. If an object of type Cursor is not otherwise initialized, it is initialized to the same value as No_Element. The predefined "=" operator for type Cursor returns True if both cursors are No_Element, or designate the same element in the same container. Execution of the default implementation of the Input, Output, Read, or Write attribute of type Cursor raises Program_Error. 60.1/3 List'Write for a List object L writes Length(L) elements of the list to the stream. It also may write additional information about the list. 60.2/3 List'Read reads the representation of a list from the stream, and assigns to Item a list with the same length and elements as was written by List'Write. 61/2 62/2 63/2 64/2 65/2 65.1/3 66/2 67/2 68/2 69/2 69.1/3 69.2/3 69.3/3 70/2 71/3 Some operations of this generic package have access-to-subprogram parameters. To ensure such operations are well-defined, they guard against certain actions by the designated subprogram. In particular, some operations check for “tampering with cursors” of a container because they depend on the set of elements of the container remaining constant, and others check for “tampering with elements” of a container because they depend on elements of the container not being replaced. A subprogram is said to tamper with cursors of a list object L if: • • • • • it inserts or deletes elements of L, that is, it calls the Insert, Clear, Delete, or Delete_Last procedures with L as a parameter; or it reorders the elements of L, that is, it calls the Splice, Swap_Links, or Reverse_Elements procedures or the Sort or Merge procedures of an instance of Generic_Sorting with L as a parameter; or it finalizes L; or it calls the Assign procedure with L as the Target parameter; or it calls the Move procedure with L as a parameter. A subprogram is said to tamper with elements of a list object L if: • • it tampers with cursors of L; or it replaces one or more elements of L, that is, it calls the Replace_Element or Swap procedures with L as a parameter. When tampering with cursors is prohibited for a particular list object L, Program_Error is propagated by a call of any language-defined subprogram that is defined to tamper with the cursors of L, leaving L unmodified. Similarly, when tampering with elements is prohibited for a particular list object L, Program_Error is propagated by a call of any language-defined subprogram that is defined to tamper with the elements of L (or tamper with the cursors of L), leaving L unmodified. function Has_Element (Position : Cursor) return Boolean; Returns True if Position designates an element, and returns False otherwise. function "=" (Left, Right : List) return Boolean; If Left and Right denote the same list object, then the function returns True. If Left and Right have different lengths, then the function returns False. Otherwise, it compares each element in Left to the corresponding element in Right using the generic formal equality operator. If any such comparison returns False, the function returns False; otherwise, it returns True. Any exception raised during evaluation of element equality is propagated. A.18.3 The Generic Package Containers.Doubly_Linked_Lists 13 December 2012 496 Ada Reference Manual — 2012 Edition function Length (Container : List) return Count_Type; Returns the number of elements in Container. function Is_Empty (Container : List) return Boolean; Equivalent to Length (Container) = 0. procedure Clear (Container : in out List); Removes all the elements from Container. function Element (Position : Cursor) return Element_Type; If Position equals No_Element, then Constraint_Error is propagated. Otherwise, Element returns the element designated by Position. procedure Replace_Element (Container : in out List; Position : in Cursor; New_Item : in Element_Type); If Position equals No_Element, then Constraint_Error is propagated; if Position does not is propagated. Otherwise, designate an element Replace_Element assigns the value New_Item to the element designated by Position. then Program_Error in Container, procedure Query_Element (Position : in Cursor; Process : not null access procedure (Element : in Element_Type)); If Position equals No_Element, then Constraint_Error is propagated. Otherwise, Query_Element calls Process.all with the element designated by Position as the argument. Tampering with the elements of the list that contains the element designated by Position is prohibited during the execution of the call on Process.all. Any exception raised by Process.all is propagated. procedure Update_Element (Container : in out List; Position : in Cursor; Process : not null access procedure (Element : in out Element_Type)); If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element is propagated. Otherwise, Update_Element calls Process.all with the element designated by Position as the argument. Tampering with the elements of Container is prohibited during the execution of the call on Process.all. Any exception raised by Process.all is propagated. then Program_Error in Container, 72/2 73/2 74/2 75/2 76/2 77/2 78/2 79/2 80/2 81/3 82/2 83/3 84/2 85/3 If Element_Type is unconstrained and definite, then the actual Element parameter of Process.all shall be unconstrained. 86/2 type Constant_Reference_Type (Element : not null access constant Element_Type) is private with Implicit_Dereference => Element; type Reference_Type (Element : not null access Element_Type) is private with Implicit_Dereference => Element; The types Constant_Reference_Type and Reference_Type need finalization. The default initialization of an object of type Constant_Reference_Type or Reference_Type propagates Program_Error. 86.1/3 86.2/3 86.3/3 86.4/3 497 13 December 2012 The Generic Package Containers.Doubly_Linked_Lists A.18.3 86.5/3 86.6/3 86.7/3 86.8/3 86.9/3 86.10/3 86.11/3 86.12/3 86.13/3 86.14/3 87/2 88/3 89/2 90/2 91/2 92/3 Ada Reference Manual — 2012 Edition function Constant_Reference (Container : aliased in List; Position : in Cursor) return Constant_Reference_Type; This function (combined with the Constant_Indexing and Implicit_Dereference aspects) provides a convenient way to gain read access to an individual element of a list given a cursor. If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element is propagated. Otherwise, Constant_Reference returns an object whose discriminant is an access value that designates the element designated by Position. Tampering with the elements of Container is prohibited while the object returned by Constant_Reference exists and has not been finalized. then Program_Error in Container, function Reference (Container : aliased in out List; Position : in Cursor) return Reference_Type; This function (combined with the Variable_Indexing and Implicit_Dereference aspects) provides a convenient way to gain read and write access to an individual element of a list given a cursor. If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element in Container, then Program_Error is propagated. Otherwise, Reference returns an object whose discriminant is an access value that designates the element designated by Position. Tampering with the elements of Container is prohibited while the object returned by Reference exists and has not been finalized. procedure Assign (Target : in out List; Source : in List); If Target denotes the same object as Source, the operation has no effect. Otherwise, the elements of Source are copied to Target as for an assignment_statement assigning Source to Target. function Copy (Source : List) return List; Returns a list whose elements match the elements of Source. procedure Move (Target : in out List; Source : in out List); If Target denotes the same object as Source, then the operation has no effect. Otherwise, the operation is equivalent to Assign (Target, Source) followed by Clear (Source). procedure Insert (Container : in out List; Before : in Cursor; New_Item : in Element_Type; Count : in Count_Type := 1); If Before is not No_Element, and does not designate an element in Container, then Program_Error is propagated. Otherwise, Insert inserts Count copies of New_Item prior to the element designated by Before. If Before equals No_Element, the new elements are inserted after the last node (if any). Any exception raised during allocation of internal storage is propagated, and Container is not modified. procedure Insert (Container : in out List; Before : in Cursor; New_Item : in Element_Type; Position : out Cursor; Count : in Count_Type := 1); If Before is not No_Element, and does not designate an element in Container, then Program_Error is propagated. Otherwise, Insert allocates Count copies of New_Item, and inserts A.18.3 The Generic Package Containers.Doubly_Linked_Lists 13 December 2012 498 Ada Reference Manual — 2012 Edition them prior to the element designated by Before. If Before equals No_Element, the new elements are inserted after the last element (if any). Position designates the first newly-inserted element, or if Count equals 0, then Position is assigned the value of Before. Any exception raised during allocation of internal storage is propagated, and Container is not modified. procedure Insert (Container : in out List; Before : in Cursor; Position : out Cursor; Count : in Count_Type := 1); If Before is not No_Element, and does not designate an element in Container, then Program_Error is propagated. Otherwise, Insert inserts Count new elements prior to the element designated by Before. If Before equals No_Element, the new elements are inserted after the last node (if any). The new elements are initialized by default (see 3.3.1). Position designates the first newly-inserted element, or if Count equals 0, then Position is assigned the value of Before. Any exception raised during allocation of internal storage is propagated, and Container is not modified. procedure Prepend (Container : in out List; New_Item : in Element_Type; Count : in Count_Type := 1); Equivalent to Insert (Container, First (Container), New_Item, Count). procedure Append (Container : in out List; New_Item : in Element_Type; Count : in Count_Type := 1); Equivalent to Insert (Container, No_Element, New_Item, Count). procedure Delete (Container : in out List; Position : in out Cursor; Count : in Count_Type := 1); If Position equals No_Element, then Constraint_Error is propagated. If Position does not designate an element in Container, then Program_Error is propagated. Otherwise, Delete removes (from Container) Count elements starting at the element designated by Position (or all of the elements starting at Position if there are fewer than Count elements starting at Position). Finally, Position is set to No_Element. procedure Delete_First (Container : in out List; Count : in Count_Type := 1); If Length (Container) <= Count, then Delete_First is equivalent to Clear (Container). Otherwise, it removes the first Count nodes from Container. procedure Delete_Last (Container : in out List; Count : in Count_Type := 1); If Length (Container) <= Count, then Delete_Last is equivalent to Clear (Container). Otherwise, it removes the last Count nodes from Container. procedure Reverse_Elements (Container : in out List); Reorders the elements of Container in reverse order. 93/2 94/3 95/2 96/2 97/2 98/2 99/2 100/3 101/2 102/3 103/2 104/3 105/2 106/2 499 13 December 2012 The Generic Package Containers.Doubly_Linked_Lists A.18.3 Ada Reference Manual — 2012 Edition procedure Swap (Container : in out List; I, J : in Cursor); If either I or J is No_Element, then Constraint_Error is propagated. If either I or J do not designate an element in Container, then Program_Error is propagated. Otherwise, Swap exchanges the values of the elements designated by I and J. procedure Swap_Links (Container : in out List; I, J : in Cursor); If either I or J is No_Element, then Constraint_Error is propagated. If either I or J do not designate an element in Container, then Program_Error is propagated. Otherwise, Swap_Links exchanges the nodes designated by I and J. procedure Splice (Target : in out List; Before : in Cursor; Source : in out List); If Before is not No_Element, and does not designate an element in Target, then Program_Error is propagated. Otherwise, if Source denotes the same object as Target, the operation has no effect. Otherwise, Splice reorders elements such that they are removed from Source and moved to Target, immediately prior to Before. If Before equals No_Element, the nodes of Source are spliced after the last node of Target. The length of Target is incremented by the number of nodes in Source, and the length of Source is set to 0. procedure Splice (Target : in out List; Before : in Cursor; Source : in out List; Position : in out Cursor); If Position is No_Element, then Constraint_Error is propagated. If Before does not equal No_Element, and does not designate an element in Target, then Program_Error is propagated. If Position does not equal No_Element, and does not designate a node in Source, then Program_Error is propagated. If Source denotes the same object as Target, then there is no effect if Position equals Before, else the element designated by Position is moved immediately prior to Before, or, if Before equals No_Element, after the last element. In both cases, Position and the length of Target are unchanged. Otherwise, the element designated by Position is removed from Source and moved to Target, immediately prior to Before, or, if Before equals No_Element, after the last element of Target. The length of Target is incremented, the length of Source is decremented, and Position is updated to represent an element in Target. procedure Splice (Container: in out List; Before : in Cursor; Position : in Cursor); If Position is No_Element, then Constraint_Error is propagated. If Before does not equal No_Element, and does not designate an element in Container, then Program_Error is propagated. If Position does not equal No_Element, and does not designate a node in Container, then Program_Error is propagated. If Position equals Before there is no effect. Otherwise, the element designated by Position is moved immediately prior to Before, or, if Before equals No_Element, after the last element. The length of Container is unchanged. function First (Container : List) return Cursor; If Container is empty, First returns the value No_Element. Otherwise, it returns a cursor that designates the first node in Container. 107/2 108/2 109/2 110/2 111/2 112/2 113/2 114/3 115/2 116/3 117/2 118/3 A.18.3 The Generic Package Containers.Doubly_Linked_Lists 13 December 2012 500 Ada Reference Manual — 2012 Edition function First_Element (Container : List) return Element_Type; Equivalent to Element (First (Container)). function Last (Container : List) return Cursor; If Container is empty, Last returns the value No_Element. Otherwise, it returns a cursor that designates the last node in Container. function Last_Element (Container : List) return Element_Type; Equivalent to Element (Last (Container)). function Next (Position : Cursor) return Cursor; If Position equals No_Element or designates the last element of the container, then Next returns the value No_Element. Otherwise, it returns a cursor that designates the successor of the element designated by Position. function Previous (Position : Cursor) return Cursor; If Position equals No_Element or designates the first element of the container, then Previous returns the value No_Element. Otherwise, it returns a cursor that designates the predecessor of the element designated by Position. procedure Next (Position : in out Cursor); Equivalent to Position := Next (Position). procedure Previous (Position : in out Cursor); Equivalent to Position := Previous (Position). function Find (Container : List; Item : Element_Type; Position : Cursor := No_Element) return Cursor; If Position is not No_Element, and does not designate an element in Container, then Program_Error is propagated. Find searches the elements of Container for an element equal to Item (using the generic formal equality operator). The search starts at the element designated by Position, or at the first element if Position equals No_Element. It proceeds towards Last (Container). If no equal element is found, then Find returns No_Element. Otherwise, it returns a cursor designating the first equal element encountered. function Reverse_Find (Container : List; Item : Element_Type; Position : Cursor := No_Element) return Cursor; If Position is not No_Element, and does not designate an element in Container, then Program_Error is propagated. Find searches the elements of Container for an element equal to Item (using the generic formal equality operator). The search starts at the element designated by Position, or at the last element if Position equals No_Element. It proceeds towards First (Container). If no equal element is found, then Reverse_Find returns No_Element. Otherwise, it returns a cursor designating the first equal element encountered. function Contains (Container : List; Item : Element_Type) return Boolean; Equivalent to Find (Container, Item) /= No_Element. 501 13 December 2012 The Generic Package Containers.Doubly_Linked_Lists A.18.3 119/2 120/2 121/2 122/3 123/2 124/2 125/2 126/2 127/2 128/2 129/2 130/2 131/2 132/2 133/2 134/2 135/2 136/2 137/2 138/2 Ada Reference Manual — 2012 Edition 141/2 142/3 143/2 144/3 144.1/3 144.2/3 144.3/3 144.4/3 145/3 146/2 147/2 Paragraphs 139 and 140 were moved above. procedure Iterate (Container : in List; Process : not null access procedure (Position : in Cursor)); Iterate calls Process.all with a cursor that designates each node in Container, starting with the first node and moving the cursor as per the Next function. Tampering with the cursors of Container is prohibited during the execution of a call on Process.all. Any exception raised by Process.all is propagated. procedure Reverse_Iterate (Container : in List; Process : not null access procedure (Position : in Cursor)); Iterates over the nodes in Container as per procedure Iterate, except that elements are traversed in reverse order, starting with the last node and moving the cursor as per the Previous function. function Iterate (Container : in List) return List_Iterator_Interfaces.Reversible_Iterator'Class; Iterate returns a reversible iterator object (see 5.5.1) that will generate a value for a loop parameter (see 5.5.2) designating each node in Container, starting with the first node and moving the cursor as per the Next function when used as a forward iterator, and starting with the last node and moving the cursor as per the Previous function when used as a reverse iterator. Tampering with the cursors of Container is prohibited while the iterator object exists (in particular, in the sequence_of_statements of the loop_statement whose iterator_specification denotes this object). The iterator object needs finalization. function Iterate (Container : in List; Start : in Cursor) return List_Iterator_Interfaces.Reversible_Iterator'Class; If Start is not No_Element and does not designate an item in Container, then Program_Error is propagated. If Start is No_Element, then Constraint_Error is propagated. Otherwise, Iterate returns a reversible iterator object (see 5.5.1) that will generate a value for a loop parameter (see 5.5.2) designating each node in Container, starting with the node designated by Start and moving the cursor as per the Next function when used as a forward iterator, or moving the cursor as per the Previous function when used as a reverse iterator. Tampering with the cursors of Container is prohibited while the iterator object exists (in particular, in the sequence_of_statements of the loop_statement whose iterator_specification denotes this object). The iterator object needs finalization. The actual function for the generic formal function "<" of Generic_Sorting is expected to return the same value each time it is called with a particular pair of element values. It should define a strict weak ordering relationship (see A.18); it should not modify Container. If the actual for "<" behaves in some other manner, the behavior of the subprograms of Generic_Sorting are unspecified. The number of times the subprograms of Generic_Sorting call "<" is unspecified. function Is_Sorted (Container : List) return Boolean; Returns True if the elements are sorted smallest first as determined by the generic formal "<" operator; otherwise, Is_Sorted returns False. Any exception raised during evaluation of "<" is propagated. A.18.3 The Generic Package Containers.Doubly_Linked_Lists 13 December 2012 502 Ada Reference Manual — 2012 Edition procedure Sort (Container : in out List); Reorders the nodes of Container such that the elements are sorted smallest first as determined by the generic formal "<" operator provided. The sort is stable. Any exception raised during evaluation of "<" is propagated. procedure Merge (Target : in out List; Source : in out List); If Source is empty, then Merge does nothing. If Source and Target are the same nonempty container object, then Program_Error is propagated. Otherwise, Merge removes elements from Source and inserts them into Target; afterwards, Target contains the union of the elements that were initially in Source and Target; Source is left empty. If Target and Source are initially sorted smallest first, then Target is ordered smallest first as determined by the generic formal "<" operator; otherwise, the order of elements in Target is unspecified. Any exception raised during evaluation of "<" is propagated. 148/2 149/2 150/2 151/3 Calling Merge in an instance of Generic_Sorting with either Source or Target not ordered smallest first using the provided generic formal "<" operator is a bounded error. Either Program_Error is raised after Target is updated as described for Merge, or the operation works as defined. 152/2 Bounded (Run-Time) Errors It is a bounded error for the actual function associated with a generic formal subprogram, when called as part of an operation of this package, to tamper with elements of any List parameter of the operation. Either Program_Error is raised, or the operation works as defined on the value of the List either prior to, or subsequent to, some or all of the modifications to the List. is to error a bounded It the visible part of Containers.Doubly_Linked_Lists when the associated container has been finalized. If the operation takes Container as an in out parameter, then it raises Constraint_Error or Program_Error. Otherwise, the operation either proceeds as it would for an empty container, or it raises Constraint_Error or Program_Error. subprogram declared any call in Erroneous Execution A Cursor value is invalid if any of the following have occurred since it was created: • The list that contains the element it designates has been finalized; • The list that contains the element it designates has been used as the Target of a call to Assign, or as the target of an assignment_statement; • The list that contains the element it designates has been used as the Source or Target of a call to Move; or • The element it designates has been removed from the list that previously contained the element. The result of "=" or Has_Element is unspecified if it is called with an invalid cursor parameter. Execution is erroneous if any other subprogram declared in Containers.Doubly_Linked_Lists is called with an invalid cursor parameter. 152.1/3 152.2/3 153/2 154/2 154.1/3 155/2 156/3 157/2 Execution is erroneous if the list associated with the result of a call to Reference or Constant_Reference is finalized before the result object returned by the call to Reference or Constant_Reference is finalized. 157.1/3 No storage associated with a doubly-linked List object shall be lost upon assignment or scope exit. 158/2 Implementation Requirements 503 13 December 2012 The Generic Package Containers.Doubly_Linked_Lists A.18.3 Ada Reference Manual — 2012 Edition 159/3 The execution of an assignment_statement for a list shall have the effect of copying the elements from the source list object to the target list object and changing the length of the target object to that of the source object. 160/2 161/2 Containers.Doubly_Linked_Lists should be implemented similarly to a linked list. In particular, if N is the length of a list, then the worst-case time complexity of Element, Insert with Count=1, and Delete with Count=1 should be O(log N). Implementation Advice The worst-case instance of Containers.Doubly_Linked_Lists.Generic_Sorting should be O(N**2), and the average time complexity should be better than O(N**2). call on procedure Sort of complexity of time an a 162/2 Move should not copy elements, and should minimize copying of internal data structures. 163/2 If an exception is propagated from a list operation, no storage should be lost, nor any elements removed from a list unless specified by the operation. 164/2 NOTES 50 Sorting a list never copies elements, and is a stable sort (equal elements remain in the original order). This is different than sorting an array or vector, which may need to copy elements, and is probably not a stable sort. A.18.4 Maps 1/2 2/3 3/2 4/2 5/2 6/2 The language-defined generic packages Containers.Hashed_Maps and Containers.Ordered_Maps provide private types Map and Cursor, and a set of operations for each type. A map container allows an arbitrary type to be used as a key to find the element associated with that key. A hashed map uses a hash function to organize the keys, while an ordered map orders the keys per a specified relation. This subclause describes the declarations that are common to both kinds of maps. See A.18.5 for a description of the semantics specific to Containers.Hashed_Maps and A.18.6 for a description of the semantics specific to Containers.Ordered_Maps. Static Semantics The actual function for the generic formal function "=" on Element_Type values is expected to define a reflexive and symmetric relationship and return the same result value each time it is called with a particular pair of values. If it behaves in some other manner, the function "=" on map values returns an unspecified value. The exact arguments and number of calls of this generic formal function by the function "=" on map values are unspecified. The type Map is used to represent maps. The type Map needs finalization (see 7.6). A map contains pairs of keys and elements, called nodes. Map cursors designate nodes, but also can be thought of as designating an element (the element contained in the node) for consistency with the other containers. There exists an equivalence relation on keys, whose definition is different for hashed maps and ordered maps. A map never contains two or more nodes with equivalent keys. The length of a map is the number of nodes it contains. Each nonempty map has two particular nodes called the first node and the last node (which may be the same). Each node except for the last node has a successor node. If there are no other intervening operations, starting with the first node and repeatedly going to the successor node will visit each node in the map exactly once until the last node is reached. The exact definition of these terms is different for hashed maps and ordered maps. A.18.3 The Generic Package Containers.Doubly_Linked_Lists 13 December 2012 504 Ada Reference Manual — 2012 Edition Some operations of these generic packages have access-to-subprogram parameters. To ensure such operations are well-defined, they guard against certain actions by the designated subprogram. In particular, some operations check for “tampering with cursors” of a container because they depend on the set of elements of the container remaining constant, and others check for “tampering with elements” of a container because they depend on elements of the container not being replaced. 7/2 A subprogram is said to tamper with cursors of a map object M if: • • • • • it inserts or deletes elements of M, that is, it calls the Insert, Include, Clear, Delete, or Exclude procedures with M as a parameter; or it finalizes M; or it calls the Assign procedure with M as the Target parameter; or it calls the Move procedure with M as a parameter; or it calls one of the operations defined to tamper with the cursors of M. A subprogram is said to tamper with elements of a map object M if: • • it tampers with cursors of M; or it replaces one or more elements of M, that is, it calls the Replace or Replace_Element procedures with M as a parameter. When tampering with cursors is prohibited for a particular map object M, Program_Error is propagated by a call of any language-defined subprogram that is defined to tamper with the cursors of M, leaving M unmodified. Similarly, when tampering with elements is prohibited for a particular map object M, Program_Error is propagated by a call of any language-defined subprogram that is defined to tamper with the elements of M (or tamper with the cursors of M), leaving M unmodified. Empty_Map represents the empty Map object. It has a length of 0. If an object of type Map is not otherwise initialized, it is initialized to the same value as Empty_Map. No_Element represents a cursor that designates no node. If an object of type Cursor is not otherwise initialized, it is initialized to the same value as No_Element. The predefined "=" operator for type Cursor returns True if both cursors are No_Element, or designate the same element in the same container. Execution of the default implementation of the Input, Output, Read, or Write attribute of type Cursor raises Program_Error. 8/2 9/2 10/2 10.1/3 11/2 12/2 13/2 14/2 15/2 15.1/3 16/2 17/2 18/2 19/2 Map'Write for a Map object M writes Length(M) elements of the map to the stream. It also may write additional information about the map. 19.1/3 Map'Read reads the representation of a map from the stream, and assigns to Item a map with the same length and elements as was written by Map'Write. function Has_Element (Position : Cursor) return Boolean; Returns True if Position designates an element, and returns False otherwise. function "=" (Left, Right : Map) return Boolean; If Left and Right denote the same map object, then the function returns True. If Left and Right have different lengths, then the function returns False. Otherwise, for each key K in Left, the function returns False if: • a key equivalent to K is not present in Right; or 19.2/3 19.3/3 19.4/3 20/2 21/2 22/2 505 13 December 2012 Maps A.18.4 23/2 24/2 25/2 26/2 27/2 28/2 29/2 30/2 31/2 32/2 33/2 34/2 35/2 36/3 37/2 38/3 39/2 40/3 41/2 Ada Reference Manual — 2012 Edition • the element associated with K in Left is not equal to the element associated with K in Right (using the generic formal equality operator for elements). If the function has not returned a result after checking all of the keys, it returns True. Any exception raised during evaluation of key equivalence or element equality is propagated. function Length (Container : Map) return Count_Type; Returns the number of nodes in Container. function Is_Empty (Container : Map) return Boolean; Equivalent to Length (Container) = 0. procedure Clear (Container : in out Map); Removes all the nodes from Container. function Key (Position : Cursor) return Key_Type; If Position equals No_Element, then Constraint_Error is propagated. Otherwise, Key returns the key component of the node designated by Position. function Element (Position : Cursor) return Element_Type; If Position equals No_Element, then Constraint_Error is propagated. Otherwise, Element returns the element component of the node designated by Position. procedure Replace_Element (Container : in out Map; Position : in Cursor; New_Item : in Element_Type); If Position equals No_Element, then Constraint_Error is propagated; if Position does not is propagated. Otherwise, designate an element Replace_Element assigns New_Item to the element of the node designated by Position. then Program_Error in Container, procedure Query_Element (Position : in Cursor; Process : not null access procedure (Key : in Key_Type; Element : in Element_Type)); If Position equals No_Element, then Constraint_Error is propagated. Otherwise, Query_Element calls Process.all with the key and element from the node designated by Position as the arguments. Tampering with the elements of the map that contains the element designated by Position is prohibited during the execution of the call on Process.all. Any exception raised by Process.all is propagated. procedure Update_Element (Container : in out Map; Position : in Cursor; Process : not null access procedure (Key : in Key_Type; Element : in out Element_Type)); If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element is propagated. Otherwise, Update_Element calls Process.all with the key and element from the node designated by Position as the arguments. Tampering with the elements of Container is prohibited during the execution of the call on Process.all. Any exception raised by Process.all is propagated. then Program_Error in Container, If Element_Type is unconstrained and definite, then the actual Element parameter of Process.all shall be unconstrained. A.18.4 Maps 13 December 2012 506 Ada Reference Manual — 2012 Edition type Constant_Reference_Type (Element : not null access constant Element_Type) is private with Implicit_Dereference => Element; type Reference_Type (Element : not null access Element_Type) is private with Implicit_Dereference => Element; The types Constant_Reference_Type and Reference_Type need finalization. The default initialization of an object of type Constant_Reference_Type or Reference_Type propagates Program_Error. function Constant_Reference (Container : aliased in Map; Position : in Cursor) return Constant_Reference_Type; 41.1/3 41.2/3 41.3/3 41.4/3 41.5/3 This function (combined with the Constant_Indexing and Implicit_Dereference aspects) provides a convenient way to gain read access to an individual element of a map given a cursor. 41.6/3 If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element is propagated. Otherwise, Constant_Reference returns an object whose discriminant is an access value that designates the element designated by Position. Tampering with the elements of Container is prohibited while the object returned by Constant_Reference exists and has not been finalized. then Program_Error in Container, function Reference (Container : aliased in out Map; Position : in Cursor) return Reference_Type; 41.7/3 41.8/3 This function (combined with the Variable_Indexing and Implicit_Dereference aspects) provides a convenient way to gain read and write access to an individual element of a map given a cursor. 41.9/3 If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element in Container, then Program_Error is propagated. Otherwise, Reference returns an object whose discriminant is an access value that designates the element designated by Position. Tampering with the elements of Container is prohibited while the object returned by Reference exists and has not been finalized. function Constant_Reference (Container : aliased in Map; Key : in Key_Type) return Constant_Reference_Type; 41.10/3 41.11/3 This function (combined with the Constant_Indexing and Implicit_Dereference aspects) provides a convenient way to gain read access to an individual element of a map given a key value. 41.12/3 Equivalent to Constant_Reference (Container, Find (Container, Key)). function Reference (Container : aliased in out Map; Key : in Key_Type) return Reference_Type; This function (combined with the Variable_Indexing and Implicit_Dereference aspects) provides a convenient way to gain read and write access to an individual element of a map given a key value. Equivalent to Reference (Container, Find (Container, Key)). 41.13/3 41.14/3 41.15/3 41.16/3 507 13 December 2012 Maps A.18.4 Ada Reference Manual — 2012 Edition 41.17/3 41.18/3 procedure Assign (Target : in out Map; Source : in Map); If Target denotes the same object as Source, the operation has no effect. Otherwise, the key/element pairs of Source are copied to Target as for an assignment_statement assigning Source to Target. 42/2 43/3 44/2 45/2 46/2 47/2 48/2 49/2 50/2 51/2 52/2 53/2 procedure Move (Target : in out Map; Source : in out Map); If Target denotes the same object as Source, then the operation has no effect. Otherwise, the operation is equivalent to Assign (Target, Source) followed by Clear (Source). procedure Insert (Container : in out Map; Key : in Key_Type; New_Item : in Element_Type; Position : out Cursor; Inserted : out Boolean); Insert checks if a node with a key equivalent to Key is already present in Container. If a match is found, Inserted is set to False and Position designates the element with the matching key. Otherwise, Insert allocates a new node, initializes it to Key and New_Item, and adds it to Container; Inserted is set to True and Position designates the newly-inserted node. Any exception raised during allocation is propagated and Container is not modified. procedure Insert (Container : in out Map; Key : in Key_Type; Position : out Cursor; Inserted : out Boolean); Insert inserts Key into Container as per the five-parameter Insert, with the difference that an element initialized by default (see 3.3.1) is inserted. procedure Insert (Container : in out Map; Key : in Key_Type; New_Item : in Element_Type); Insert inserts Key and New_Item into Container as per the five-parameter Insert, with the difference that if a node with a key equivalent to Key is already in the map, then Constraint_Error is propagated. procedure Include (Container : in out Map; Key : in Key_Type; New_Item : in Element_Type); Include inserts Key and New_Item into Container as per the five-parameter Insert, with the difference that if a node with a key equivalent to Key is already in the map, then this operation assigns Key and New_Item to the matching node. Any exception raised during assignment is propagated. procedure Replace (Container : in out Map; Key : in Key_Type; New_Item : in Element_Type); Replace checks if a node with a key equivalent to Key is present in Container. If a match is found, Replace assigns Key and New_Item to the matching node; otherwise, Constraint_Error is propagated. A.18.4 Maps 13 December 2012 508 Ada Reference Manual — 2012 Edition procedure Exclude (Container : in out Map; Key : in Key_Type); Exclude checks if a node with a key equivalent to Key is present in Container. If a match is found, Exclude removes the node from the map. procedure Delete (Container : in out Map; Key : in Key_Type); Delete checks if a node with a key equivalent to Key is present in Container. If a match is found, Delete removes the node from the map; otherwise, Constraint_Error is propagated. procedure Delete (Container : in out Map; Position : in out Cursor); If Position equals No_Element, then Constraint_Error is propagated. If Position does not designate an element in Container, then Program_Error is propagated. Otherwise, Delete removes the node designated by Position from the map. Position is set to No_Element on return. function First (Container : Map) return Cursor; If Length (Container) = 0, then First returns No_Element. Otherwise, First returns a cursor that designates the first node in Container. function Next (Position : Cursor) return Cursor; Returns a cursor that designates the successor of the node designated by Position. If Position designates the last node, then No_Element is returned. If Position equals No_Element, then No_Element is returned. procedure Next (Position : in out Cursor); Equivalent to Position := Next (Position). function Find (Container : Map; Key : Key_Type) return Cursor; If Length (Container) equals 0, then Find returns No_Element. Otherwise, Find checks if a node with a key equivalent to Key is present in Container. If a match is found, a cursor designating the matching node is returned; otherwise, No_Element is returned. function Element (Container : Map; Key : Key_Type) return Element_Type; Equivalent to Element (Find (Container, Key)). function Contains (Container : Map; Key : Key_Type) return Boolean; Equivalent to Find (Container, Key) /= No_Element. Paragraphs 72 and 73 were moved above. procedure Iterate (Container : in Map; Process : not null access procedure (Position : in Cursor)); Iterate calls Process.all with a cursor that designates each node in Container, starting with the first node and moving the cursor according to the successor relation. Tampering with the cursors of Container is prohibited during the execution of a call on Process.all. Any exception raised by Process.all is propagated. 54/2 55/2 56/2 57/2 58/2 59/2 60/2 61/2 62/2 63/2 64/2 65/2 66/2 67/2 68/2 69/2 70/2 71/2 74/2 75/3 509 13 December 2012 Maps A.18.4 Ada Reference Manual — 2012 Edition 75.1/3 75.2/3 76/2 77/2 77.1/3 Bounded (Run-Time) Errors It is a bounded error for the actual function associated with a generic formal subprogram, when called as part of an operation of a map package, to tamper with elements of any map parameter of the operation. Either Program_Error is raised, or the operation works as defined on the value of the map either prior to, or subsequent to, some or all of the modifications to the map. It is a bounded error to call any subprogram declared in the visible part of a map package when the associated container has been finalized. If the operation takes Container as an in out parameter, then it raises Constraint_Error or Program_Error. Otherwise, the operation either proceeds as it would for an empty container, or it raises Constraint_Error or Program_Error. Erroneous Execution A Cursor value is invalid if any of the following have occurred since it was created: • The map that contains the node it designates has been finalized; • The map that contains the node it designates has been used as the Target of a call to Assign, or as the target of an assignment_statement; 78/2 • The map that contains the node it designates has been used as the Source or Target of a call to Move; or 79/3 80/2 • The node it designates has been removed from the map that previously contained the node. The result of "=" or Has_Element is unspecified if these functions are called with an invalid cursor parameter. Execution is erroneous if any other subprogram declared in Containers.Hashed_Maps or Containers.Ordered_Maps is called with an invalid cursor parameter. 80.1/3 Execution is erroneous if the map associated with the result of a call to Reference or Constant_Reference is finalized before the result object returned by the call to Reference or Constant_Reference is finalized. 81/2 No storage associated with a Map object shall be lost upon assignment or scope exit. Implementation Requirements 82/3 The execution of an assignment_statement for a map shall have the effect of copying the elements from the source map object to the target map object and changing the length of the target object to that of the source object. 83/2 Move should not copy elements, and should minimize copying of internal data structures. Implementation Advice 84/2 If an exception is propagated from a map operation, no storage should be lost, nor any elements removed from a map unless specified by the operation. A.18.4 Maps 13 December 2012 510 Ada Reference Manual — 2012 Edition A.18.5 The Generic Package Containers.Hashed_Maps The generic library package Containers.Hashed_Maps has the following declaration: Static Semantics with Ada.Iterator_Interfaces; generic type Key_Type is private; type Element_Type is private; with function Hash (Key : Key_Type) return Hash_Type; with function Equivalent_Keys (Left, Right : Key_Type) return Boolean; with function "=" (Left, Right : Element_Type) return Boolean is <>; package Ada.Containers.Hashed_Maps is pragma Preelaborate(Hashed_Maps); pragma Remote_Types(Hashed_Maps); type Map is tagged private with Constant_Indexing => Constant_Reference, Variable_Indexing => Reference, Default_Iterator => Iterate, Iterator_Element => Element_Type; pragma Preelaborable_Initialization(Map); type Cursor is private; pragma Preelaborable_Initialization(Cursor); Empty_Map : constant Map; No_Element : constant Cursor; function Has_Element (Position : Cursor) return Boolean; package Map_Iterator_Interfaces is new Ada.Iterator_Interfaces (Cursor, Has_Element); function "=" (Left, Right : Map) return Boolean; function Capacity (Container : Map) return Count_Type; procedure Reserve_Capacity (Container : in out Map; Capacity : in Count_Type); function Length (Container : Map) return Count_Type; function Is_Empty (Container : Map) return Boolean; procedure Clear (Container : in out Map); function Key (Position : Cursor) return Key_Type; function Element (Position : Cursor) return Element_Type; procedure Replace_Element (Container : in out Map; Position : in Cursor; New_Item : in Element_Type); procedure Query_Element (Position : in Cursor; Process : not null access procedure (Key : in Key_Type; Element : in Element_Type)); procedure Update_Element (Container : in out Map; Position : in Cursor; Process : not null access procedure (Key : in Key_Type; Element : in out Element_Type)); type Constant_Reference_Type (Element : not null access constant Element_Type) is private with Implicit_Dereference => Element; 1/2 2/3 3/3 4/2 5/2 6/2 6.1/3 6.2/3 7/2 8/2 9/2 10/2 11/2 12/2 13/2 14/2 15/2 16/2 17/2 17.1/3 511 13 December 2012 The Generic Package Containers.Hashed_Maps A.18.5 Ada Reference Manual — 2012 Edition 17.2/3 17.3/3 17.4/3 17.5/3 17.6/3 17.7/3 17.8/3 18/2 19/2 20/2 21/2 22/2 23/2 24/2 25/2 26/2 27/2 28/2 29/2 30/2 31/2 32/2 33/3 type Reference_Type (Element : not null access Element_Type) is private with Implicit_Dereference => Element; function Constant_Reference (Container : aliased in Map; Position : in Cursor) return Constant_Reference_Type; function Reference (Container : aliased in out Map; Position : in Cursor) return Reference_Type; function Constant_Reference (Container : aliased in Map; Key : in Key_Type) return Constant_Reference_Type; function Reference (Container : aliased in out Map; Key : in Key_Type) return Reference_Type; procedure Assign (Target : in out Map; Source : in Map); function Copy (Source : Map; Capacity : Count_Type := 0) return Map; procedure Move (Target : in out Map; Source : in out Map); procedure Insert (Container : in out Map; Key : in Key_Type; New_Item : in Element_Type; Position : out Cursor; Inserted : out Boolean); procedure Insert (Container : in out Map; Key : in Key_Type; Position : out Cursor; Inserted : out Boolean); procedure Insert (Container : in out Map; Key : in Key_Type; New_Item : in Element_Type); procedure Include (Container : in out Map; Key : in Key_Type; New_Item : in Element_Type); procedure Replace (Container : in out Map; Key : in Key_Type; New_Item : in Element_Type); procedure Exclude (Container : in out Map; Key : in Key_Type); procedure Delete (Container : in out Map; Key : in Key_Type); procedure Delete (Container : in out Map; Position : in out Cursor); function First (Container : Map) return Cursor; function Next (Position : Cursor) return Cursor; procedure Next (Position : in out Cursor); function Find (Container : Map; Key : Key_Type) return Cursor; function Element (Container : Map; Key : Key_Type) return Element_Type; function Contains (Container : Map; Key : Key_Type) return Boolean; This paragraph was deleted. A.18.5 The Generic Package Containers.Hashed_Maps 13 December 2012 512 Ada Reference Manual — 2012 Edition function Equivalent_Keys (Left, Right : Cursor) return Boolean; function Equivalent_Keys (Left : Cursor; Right : Key_Type) return Boolean; function Equivalent_Keys (Left : Key_Type; Right : Cursor) return Boolean; procedure Iterate (Container : in Map; Process : not null access procedure (Position : in Cursor)); function Iterate (Container : in Map) return Map_Iterator_Interfaces.Forward_Iterator'Class; private ... -- not specified by the language end Ada.Containers.Hashed_Maps; An object of type Map contains an expandable hash table, which is used to provide direct access to nodes. The capacity of an object of type Map is the maximum number of nodes that can be inserted into the hash table prior to it being automatically expanded. Two keys K1 and K2 are defined to be equivalent if Equivalent_Keys (K1, K2) returns True. The actual function for the generic formal function Hash is expected to return the same value each time it is called with a particular key value. For any two equivalent key values, the actual for Hash is expected to return the same value. If the actual for Hash behaves in some other manner, the behavior of this package is unspecified. Which subprograms of this package call Hash, and how many times they call it, is unspecified. The actual function for the generic formal function Equivalent_Keys on Key_Type values is expected to return the same value each time it is called with a particular pair of key values. It should define an equivalence relationship, that is, be reflexive, symmetric, and transitive. If the actual for Equivalent_Keys behaves in some other manner, the behavior of this package is unspecified. Which subprograms of this package call Equivalent_Keys, and how many times they call it, is unspecified. If the value of a key stored in a node of a map is changed other than by an operation in this package such that at least one of Hash or Equivalent_Keys give different results, the behavior of this package is unspecified. Which nodes are the first node and the last node of a map, and which node is the successor of a given node, are unspecified, other than the general semantics described in A.18.4. function Capacity (Container : Map) return Count_Type; Returns the capacity of Container. procedure Reserve_Capacity (Container : in out Map; Capacity : in Count_Type); Reserve_Capacity allocates a new hash table such that the length of the resulting map can become at least the value Capacity without requiring an additional call to Reserve_Capacity, and is large enough to hold the current length of Container. Reserve_Capacity then rehashes the nodes in Container onto the new hash table. It replaces the old hash table with the new hash table, and then deallocates the old hash table. Any exception raised during allocation is propagated and Container is not modified. Reserve_Capacity tampers with the cursors of Container. 513 13 December 2012 The Generic Package Containers.Hashed_Maps A.18.5 34/2 35/2 36/2 37/2 37.1/3 38/2 39/2 40/2 41/2 42/2 43/2 44/2 45/2 46/2 47/2 48/2 49/2 50/2 51/2 52/2 53/2 53.1/3 53.2/3 53.3/3 53.4/3 54/2 55/2 56/2 57/2 58/2 59/2 60/2 61/2 61.1/3 61.2/3 Ada Reference Manual — 2012 Edition procedure Clear (Container : in out Map); In addition to the semantics described in A.18.4, Clear does not affect the capacity of Container. procedure Assign (Target : in out Map; Source : in Map); In addition to the semantics described in A.18.4, if the length of Source is greater than the capacity of Target, Reserve_Capacity (Target, Length (Source)) is called before assigning any elements. function Copy (Source : Map; Capacity : Count_Type := 0) return Map; Returns a map whose keys and elements are initialized from the keys and elements of Source. If Capacity is 0, then the map capacity is the length of Source; if Capacity is equal to or greater than the length of Source, the map capacity is at least the specified value. Otherwise, the operation propagates Capacity_Error. procedure Insert (Container : in out Map; Key : in Key_Type; New_Item : in Element_Type; Position : out Cursor; Inserted : out Boolean); In addition to the semantics described in A.18.4, if Length (Container) equals Capacity (Container), then Insert first calls Reserve_Capacity to increase the capacity of Container to some larger value. function Equivalent_Keys (Left, Right : Cursor) return Boolean; Equivalent to Equivalent_Keys (Key (Left), Key (Right)). function Equivalent_Keys (Left : Cursor; Right : Key_Type) return Boolean; Equivalent to Equivalent_Keys (Key (Left), Right). function Equivalent_Keys (Left : Key_Type; Right : Cursor) return Boolean; Equivalent to Equivalent_Keys (Left, Key (Right)). function Iterate (Container : in Map) return Map_Iterator_Interfaces.Forward_Iterator'Class; Iterate returns an iterator object (see 5.5.1) that will generate a value for a loop parameter (see 5.5.2) designating each node in Container, starting with the first node and moving the cursor according to the successor relation. Tampering with the cursors of Container is prohibited while the iterator object exists (in particular, in the sequence_of_statements of the loop_statement whose iterator_specification denotes this object). The iterator object needs finalization. 62/2 If N is the length of a map, the average time complexity of the subprograms Element, Insert, Include, Replace, Delete, Exclude and Find that take a key parameter should be O(log N). The average time complexity of the subprograms that take a cursor parameter should be O(1). The average time complexity of Reserve_Capacity should be O(N). Implementation Advice A.18.5 The Generic Package Containers.Hashed_Maps 13 December 2012 514 Ada Reference Manual — 2012 Edition A.18.6 The Generic Package Containers.Ordered_Maps The generic library package Containers.Ordered_Maps has the following declaration: Static Semantics with Ada.Iterator_Interfaces; generic type Key_Type is private; type Element_Type is private; with function "<" (Left, Right : Key_Type) return Boolean is <>; with function "=" (Left, Right : Element_Type) return Boolean is <>; package Ada.Containers.Ordered_Maps is pragma Preelaborate(Ordered_Maps); pragma Remote_Types(Ordered_Maps); function Equivalent_Keys (Left, Right : Key_Type) return Boolean; type Map is tagged private with Constant_Indexing => Constant_Reference, Variable_Indexing => Reference, Default_Iterator => Iterate, Iterator_Element => Element_Type; pragma Preelaborable_Initialization(Map); type Cursor is private; pragma Preelaborable_Initialization(Cursor); Empty_Map : constant Map; No_Element : constant Cursor; function Has_Element (Position : Cursor) return Boolean; package Map_Iterator_Interfaces is new Ada.Iterator_Interfaces (Cursor, Has_Element); function "=" (Left, Right : Map) return Boolean; function Length (Container : Map) return Count_Type; function Is_Empty (Container : Map) return Boolean; procedure Clear (Container : in out Map); function Key (Position : Cursor) return Key_Type; function Element (Position : Cursor) return Element_Type; procedure Replace_Element (Container : in out Map; Position : in Cursor; New_Item : in Element_Type); procedure Query_Element (Position : in Cursor; Process : not null access procedure (Key : in Key_Type; Element : in Element_Type)); procedure Update_Element (Container : in out Map; Position : in Cursor; Process : not null access procedure (Key : in Key_Type; Element : in out Element_Type)); type Constant_Reference_Type (Element : not null access constant Element_Type) is private with Implicit_Dereference => Element; type Reference_Type (Element : not null access Element_Type) is private with Implicit_Dereference => Element; function Constant_Reference (Container : aliased in Map; Position : in Cursor) return Constant_Reference_Type; 1/2 2/3 3/2 4/3 5/2 6/2 7/2 7.1/3 7.2/3 8/2 9/2 10/2 11/2 12/2 13/2 14/2 15/2 16/2 16.1/3 16.2/3 16.3/3 515 13 December 2012 The Generic Package Containers.Ordered_Maps A.18.6 Ada Reference Manual — 2012 Edition 16.4/3 16.5/3 16.6/3 16.7/3 16.8/3 17/2 18/2 19/2 20/2 21/2 22/2 23/2 24/2 25/2 26/2 27/2 28/2 29/2 30/2 31/2 32/2 33/2 34/2 35/2 36/2 37/2 38/2 39/2 function Reference (Container : aliased in out Map; Position : in Cursor) return Reference_Type; function Constant_Reference (Container : aliased in Map; Key : in Key_Type) return Constant_Reference_Type; function Reference (Container : aliased in out Map; Key : in Key_Type) return Reference_Type; procedure Assign (Target : in out Map; Source : in Map); function Copy (Source : Map) return Map; procedure Move (Target : in out Map; Source : in out Map); procedure Insert (Container : in out Map; Key : in Key_Type; New_Item : in Element_Type; Position : out Cursor; Inserted : out Boolean); procedure Insert (Container : in out Map; Key : in Key_Type; Position : out Cursor; Inserted : out Boolean); procedure Insert (Container : in out Map; Key : in Key_Type; New_Item : in Element_Type); procedure Include (Container : in out Map; Key : in Key_Type; New_Item : in Element_Type); procedure Replace (Container : in out Map; Key : in Key_Type; New_Item : in Element_Type); procedure Exclude (Container : in out Map; Key : in Key_Type); procedure Delete (Container : in out Map; Key : in Key_Type); procedure Delete (Container : in out Map; Position : in out Cursor); procedure Delete_First (Container : in out Map); procedure Delete_Last (Container : in out Map); function First (Container : Map) return Cursor; function First_Element (Container : Map) return Element_Type; function First_Key (Container : Map) return Key_Type; function Last (Container : Map) return Cursor; function Last_Element (Container : Map) return Element_Type; function Last_Key (Container : Map) return Key_Type; function Next (Position : Cursor) return Cursor; procedure Next (Position : in out Cursor); function Previous (Position : Cursor) return Cursor; procedure Previous (Position : in out Cursor); function Find (Container : Map; Key : Key_Type) return Cursor; function Element (Container : Map; Key : Key_Type) return Element_Type; A.18.6 The Generic Package Containers.Ordered_Maps 13 December 2012 516 Ada Reference Manual — 2012 Edition function Floor (Container : Map; Key : Key_Type) return Cursor; function Ceiling (Container : Map; Key : Key_Type) return Cursor; function Contains (Container : Map; Key : Key_Type) return Boolean; This paragraph was deleted. function "<" (Left, Right : Cursor) return Boolean; function ">" (Left, Right : Cursor) return Boolean; function "<" (Left : Cursor; Right : Key_Type) return Boolean; function ">" (Left : Cursor; Right : Key_Type) return Boolean; function "<" (Left : Key_Type; Right : Cursor) return Boolean; function ">" (Left : Key_Type; Right : Cursor) return Boolean; procedure Iterate (Container : in Map; Process : not null access procedure (Position : in Cursor)); procedure Reverse_Iterate (Container : in Map; Process : not null access procedure (Position : in Cursor)); function Iterate (Container : in Map) return Map_Iterator_Interfaces.Reversible_Iterator'Class; function Iterate (Container : in Map; Start : in Cursor) return Map_Iterator_Interfaces.Reversible_Iterator'Class; private ... -- not specified by the language end Ada.Containers.Ordered_Maps; Two keys K1 and K2 are equivalent if both K1 < K2 and K2 < K1 return False, using the generic formal "<" operator for keys. Function Equivalent_Keys returns True if Left and Right are equivalent, and False otherwise. The actual function for the generic formal function "<" on Key_Type values is expected to return the same value each time it is called with a particular pair of key values. It should define a strict weak ordering relationship (see A.18). If the actual for "<" behaves in some other manner, the behavior of this package is unspecified. Which subprograms of this package call "<" and how many times they call it, is unspecified. If the value of a key stored in a map is changed other than by an operation in this package such that at least one of "<" or "=" give different results, the behavior of this package is unspecified. The first node of a nonempty map is the one whose key is less than the key of all the other nodes in the map. The last node of a nonempty map is the one whose key is greater than the key of all the other elements in the map. The successor of a node is the node with the smallest key that is larger than the key of the given node. The predecessor of a node is the node with the largest key that is smaller than the key of the given node. All comparisons are done using the generic formal "<" operator for keys. function Copy (Source : Map) return Map; Returns a map whose keys and elements are initialized from the corresponding keys and elements of Source. procedure Delete_First (Container : in out Map); If Container is empty, Delete_First has no effect. Otherwise, the node designated by First (Container) is removed from Container. Delete_First tampers with the cursors of Container. 517 13 December 2012 The Generic Package Containers.Ordered_Maps A.18.6 40/2 41/2 42/2 43/3 44/2 45/2 46/2 47/2 48/2 49/2 50/2 51/2 51.1/3 51.2/3 52/2 53/2 54/2 55/2 56/3 57/2 58/3 58.1/3 58.2/3 59/2 60/3 Ada Reference Manual — 2012 Edition 61/2 62/3 63/2 64/2 65/2 66/2 67/2 68/2 69/2 70/2 71/2 72/2 73/2 74/3 75/2 76/2 77/2 78/3 79/2 80/3 81/2 82/2 83/2 84/2 85/2 86/2 procedure Delete_Last (Container : in out Map); If Container is empty, Delete_Last has no effect. Otherwise, the node designated by Last (Container) is removed from Container. Delete_Last tampers with the cursors of Container. function First_Element (Container : Map) return Element_Type; Equivalent to Element (First (Container)). function First_Key (Container : Map) return Key_Type; Equivalent to Key (First (Container)). function Last (Container : Map) return Cursor; Returns a cursor that designates the last node in Container. If Container is empty, returns No_Element. function Last_Element (Container : Map) return Element_Type; Equivalent to Element (Last (Container)). function Last_Key (Container : Map) return Key_Type; Equivalent to Key (Last (Container)). function Previous (Position : Cursor) return Cursor; If Position equals No_Element, then Previous returns No_Element. Otherwise, Previous returns a cursor designating the predecessor node of the one designated by Position. If Position designates the first element, then Previous returns No_Element. procedure Previous (Position : in out Cursor); Equivalent to Position := Previous (Position). function Floor (Container : Map; Key : Key_Type) return Cursor; Floor searches for the last node whose key is not greater than Key, using the generic formal "<" operator for keys. If such a node is found, a cursor that designates it is returned. Otherwise, No_Element is returned. function Ceiling (Container : Map; Key : Key_Type) return Cursor; Ceiling searches for the first node whose key is not less than Key, using the generic formal "<" operator for keys. If such a node is found, a cursor that designates it is returned. Otherwise, No_Element is returned. function "<" (Left, Right : Cursor) return Boolean; Equivalent to Key (Left) < Key (Right). function ">" (Left, Right : Cursor) return Boolean; Equivalent to Key (Right) < Key (Left). function "<" (Left : Cursor; Right : Key_Type) return Boolean; Equivalent to Key (Left) < Right. A.18.6 The Generic Package Containers.Ordered_Maps 13 December 2012 518 Ada Reference Manual — 2012 Edition function ">" (Left : Cursor; Right : Key_Type) return Boolean; Equivalent to Right < Key (Left). function "<" (Left : Key_Type; Right : Cursor) return Boolean; Equivalent to Left < Key (Right). function ">" (Left : Key_Type; Right : Cursor) return Boolean; Equivalent to Key (Right) < Left. procedure Reverse_Iterate (Container : in Map; Process : not null access procedure (Position : in Cursor)); Iterates over the nodes in Container as per procedure Iterate, with the difference that the nodes are traversed in predecessor order, starting with the last node. function Iterate (Container : in Map) return Map_Iterator_Interfaces.Reversible_Iterator'Class; Iterate returns a reversible iterator object (see 5.5.1) that will generate a value for a loop parameter (see 5.5.2) designating each node in Container, starting with the first node and moving the cursor according to the successor relation when used as a forward iterator, and starting with the last node and moving the cursor according to the predecessor relation when used as a reverse iterator. Tampering with the cursors of Container is prohibited while the iterator object exists (in particular, in the sequence_of_statements of the loop_statement whose iterator_specification denotes this object). The iterator object needs finalization. function Iterate (Container : in Map; Start : in Cursor) return Map_Iterator_Interfaces.Reversible_Iterator'Class; If Start is not No_Element and does not designate an item in Container, then Program_Error is propagated. If Start is No_Element, then Constraint_Error is propagated. Otherwise, Iterate returns a reversible iterator object (see 5.5.1) that will generate a value for a loop parameter (see 5.5.2) designating each node in Container, starting with the node designated by Start and moving the cursor according to the successor relation when used as a forward iterator, or moving the cursor according to the predecessor relation when used as a reverse iterator. Tampering with the cursors of Container is prohibited while the iterator object exists (in particular, in the sequence_of_statements of the loop_statement whose iterator_specification denotes this object). The iterator object needs finalization. 87/2 88/2 89/2 90/2 91/2 92/2 93/2 94/3 94.1/3 94.2/3 94.3/3 94.4/3 If N is the length of a map, then the worst-case time complexity of the Element, Insert, Include, Replace, Delete, Exclude and Find operations that take a key parameter should be O((log N)**2) or better. The worst-case time complexity of the subprograms that take a cursor parameter should be O(1). 95/2 Implementation Advice A.18.7 Sets The language-defined generic packages Containers.Hashed_Sets and Containers.Ordered_Sets provide private types Set and Cursor, and a set of operations for each type. A set container allows elements of an arbitrary type to be stored without duplication. A hashed set uses a hash function to organize elements, while an ordered set orders its element per a specified relation. 1/2 519 13 December 2012 The Generic Package Containers.Ordered_Maps A.18.6 Ada Reference Manual — 2012 Edition 2/3 3/2 4/2 5/2 6/2 7/2 8/2 9/2 10/2 10.1/3 11/2 12/2 13/2 14/2 14.1/3 15/2 16/2 This subclause describes the declarations that are common to both kinds of sets. See A.18.8 for a description of the semantics specific to Containers.Hashed_Sets and A.18.9 for a description of the semantics specific to Containers.Ordered_Sets. Static Semantics The actual function for the generic formal function "=" on Element_Type values is expected to define a reflexive and symmetric relationship and return the same result value each time it is called with a particular pair of values. If it behaves in some other manner, the function "=" on set values returns an unspecified value. The exact arguments and number of calls of this generic formal function by the function "=" on set values are unspecified. The type Set is used to represent sets. The type Set needs finalization (see 7.6). A set contains elements. Set cursors designate elements. There exists an equivalence relation on elements, whose definition is different for hashed sets and ordered sets. A set never contains two or more equivalent elements. The length of a set is the number of elements it contains. Each nonempty set has two particular elements called the first element and the last element (which may be the same). Each element except for the last element has a successor element. If there are no other intervening operations, starting with the first element and repeatedly going to the successor element will visit each element in the set exactly once until the last element is reached. The exact definition of these terms is different for hashed sets and ordered sets. Some operations of these generic packages have access-to-subprogram parameters. To ensure such operations are well-defined, they guard against certain actions by the designated subprogram. In particular, some operations check for “tampering with cursors” of a container because they depend on the set of elements of the container remaining constant, and others check for “tampering with elements” of a container because they depend on elements of the container not being replaced. A subprogram is said to tamper with cursors of a set object S if: • • • • • it inserts or deletes elements of S, that is, it calls the Insert, Include, Clear, Delete, Exclude, or Replace_Element procedures with S as a parameter; or it finalizes S; or it calls the Assign procedure with S as the Target parameter; or it calls the Move procedure with S as a parameter; or it calls one of the operations defined to tamper with cursors of S. A subprogram is said to tamper with elements of a set object S if: • it tampers with cursors of S. When tampering with cursors is prohibited for a particular set object S, Program_Error is propagated by a call of any language-defined subprogram that is defined to tamper with the cursors of S, leaving S unmodified. Similarly, when tampering with elements is prohibited for a particular set object S, Program_Error is propagated by a call of any language-defined subprogram that is defined to tamper with the elements of S (or tamper with the cursors of S), leaving S unmodified. Empty_Set represents the empty Set object. It has a length of 0. If an object of type Set is not otherwise initialized, it is initialized to the same value as Empty_Set. No_Element represents a cursor that designates no element. If an object of type Cursor is not otherwise initialized, it is initialized to the same value as No_Element. A.18.7 Sets 13 December 2012 520 Ada Reference Manual — 2012 Edition The predefined "=" operator for type Cursor returns True if both cursors are No_Element, or designate the same element in the same container. Execution of the default implementation of the Input, Output, Read, or Write attribute of type Cursor raises Program_Error. 17/2 18/2 Set'Write for a Set object S writes Length(S) elements of the set to the stream. It also may write additional information about the set. 18.1/3 Set'Read reads the representation of a set from the stream, and assigns to Item a set with the same length and elements as was written by Set'Write. function Has_Element (Position : Cursor) return Boolean; Returns True if Position designates an element, and returns False otherwise. function "=" (Left, Right : Set) return Boolean; If Left and Right denote the same set object, then the function returns True. If Left and Right have different lengths, then the function returns False. Otherwise, for each element E in Left, the function returns False if an element equal to E (using the generic formal equality operator) is not present in Right. If the function has not returned a result after checking all of the elements, it returns True. Any exception raised during evaluation of element equality is propagated. function Equivalent_Sets (Left, Right : Set) return Boolean; If Left and Right denote the same set object, then the function returns True. If Left and Right have different lengths, then the function returns False. Otherwise, for each element E in Left, the function returns False if an element equivalent to E is not present in Right. If the function has not returned a result after checking all of the elements, it returns True. Any exception raised during evaluation of element equivalence is propagated. function To_Set (New_Item : Element_Type) return Set; Returns a set containing the single element New_Item. function Length (Container : Set) return Count_Type; Returns the number of elements in Container. function Is_Empty (Container : Set) return Boolean; Equivalent to Length (Container) = 0. procedure Clear (Container : in out Set); Removes all the elements from Container. function Element (Position : Cursor) return Element_Type; If Position equals No_Element, then Constraint_Error is propagated. Otherwise, Element returns the element designated by Position. procedure Replace_Element (Container : in out Set; Position : in Cursor; New_Item : in Element_Type); If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element in Container, then Program_Error is propagated. If an element equivalent to New_Item is already present in Container at a position other than Position, Program_Error is 521 13 December 2012 Sets A.18.7 18.2/3 18.3/3 18.4/3 19/2 20/2 21/2 22/2 23/2 24/2 25/2 26/2 27/2 28/2 29/2 30/2 31/2 32/2 33/2 34/2 Ada Reference Manual — 2012 Edition propagated. Otherwise, Replace_Element assigns New_Item to the element designated by Position. Any exception raised by the assignment is propagated. procedure Query_Element (Position : in Cursor; Process : not null access procedure (Element : in Element_Type)); If Position equals No_Element, then Constraint_Error is propagated. Otherwise, Query_Element calls Process.all with the element designated by Position as the argument. Tampering with the elements of the set that contains the element designated by Position is prohibited during the execution of the call on Process.all. Any exception raised by Process.all is propagated. type Constant_Reference_Type (Element : not null access constant Element_Type) is private with Implicit_Dereference => Element; The type Constant_Reference_Type needs finalization. The default Program_Error. initialization of an object of type Constant_Reference_Type propagates function Constant_Reference (Container : aliased in Set; Position : in Cursor) return Constant_Reference_Type; This function (combined with the Constant_Indexing and Implicit_Dereference aspects) provides a convenient way to gain read access to an individual element of a set given a cursor. If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element is propagated. Otherwise, Constant_Reference returns an object whose discriminant is an access value that designates the element designated by Position. Tampering with the elements of Container is prohibited while the object returned by Constant_Reference exists and has not been finalized. then Program_Error in Container, procedure Assign (Target : in out Set; Source : in Set); If Target denotes the same object as Source, the operation has no effect. Otherwise, the elements of Source are copied to Target as for an assignment_statement assigning Source to Target. procedure Move (Target : in out Set; Source : in out Set); If Target denotes the same object as Source, then the operation has no effect. Otherwise, the operation is equivalent to Assign (Target, Source) followed by Clear (Source). procedure Insert (Container : in out Set; New_Item : in Element_Type; Position : out Cursor; Inserted : out Boolean); Insert checks if an element equivalent to New_Item is already present in Container. If a match is found, Inserted is set to False and Position designates the matching element. Otherwise, Insert adds New_Item to Container; Inserted is set to True and Position designates the newly-inserted element. Any exception raised during allocation is propagated and Container is not modified. procedure Insert (Container : in out Set; New_Item : in Element_Type); Insert inserts New_Item into Container as per the four-parameter Insert, with the difference that if an element equivalent to New_Item is already in the set, then Constraint_Error is propagated. A.18.7 Sets 13 December 2012 522 35/2 36/3 36.1/3 36.2/3 36.3/3 36.4/3 36.5/3 36.6/3 36.7/3 36.8/3 37/2 38/3 39/2 40/2 41/2 42/2 Ada Reference Manual — 2012 Edition procedure Include (Container : in out Set; New_Item : in Element_Type); Include inserts New_Item into Container as per the four-parameter Insert, with the difference that if an element equivalent to New_Item is already in the set, then it is replaced. Any exception raised during assignment is propagated. procedure Replace (Container : in out Set; New_Item : in Element_Type); Replace checks if an element equivalent to New_Item is already in the set. If a match is found, that element is replaced with New_Item; otherwise, Constraint_Error is propagated. procedure Exclude (Container : in out Set; Item : in Element_Type); Exclude checks if an element equivalent to Item is present in Container. If a match is found, Exclude removes the element from the set. procedure Delete (Container : in out Set; Item : in Element_Type); Delete checks if an element equivalent to Item is present in Container. If a match is found, Delete removes the element from the set; otherwise, Constraint_Error is propagated. procedure Delete (Container : in out Set; Position : in out Cursor); If Position equals No_Element, then Constraint_Error is propagated. If Position does not designate an element in Container, then Program_Error is propagated. Otherwise, Delete removes the element designated by Position from the set. Position is set to No_Element on return. procedure Union (Target : in out Set; Source : in Set); Union inserts into Target the elements of Source that are not equivalent to some element already in Target. function Union (Left, Right : Set) return Set; Returns a set comprising all of the elements of Left, and the elements of Right that are not equivalent to some element of Left. procedure Intersection (Target : in out Set; Source : in Set); Intersection deletes from Target the elements of Target that are not equivalent to some element of Source. function Intersection (Left, Right : Set) return Set; Returns a set comprising all the elements of Left that are equivalent to the some element of Right. procedure Difference (Target : in out Set; Source : in Set); If Target denotes the same object as Source, then Difference clears Target. Otherwise, it deletes from Target the elements that are equivalent to some element of Source. 43/2 44/2 45/2 46/2 47/2 48/2 49/2 50/2 51/2 52/2 53/2 54/2 55/2 56/2 57/2 58/3 59/2 60/2 61/2 62/2 523 13 December 2012 Sets A.18.7 Ada Reference Manual — 2012 Edition 63/2 64/2 65/2 66/2 67/2 68/2 69/2 70/3 71/2 72/3 73/2 74/2 75/2 76/2 77/2 78/2 79/3 80/2 81/2 82/2 82.1/3 function Difference (Left, Right : Set) return Set; Returns a set comprising the elements of Left that are not equivalent to some element of Right. procedure Symmetric_Difference (Target : in out Set; Source : in Set); If Target denotes the same object as Source, then Symmetric_Difference clears Target. Otherwise, it deletes from Target the elements that are equivalent to some element of Source, and inserts into Target the elements of Source that are not equivalent to some element of Target. function Symmetric_Difference (Left, Right : Set) return Set; Returns a set comprising the elements of Left that are not equivalent to some element of Right, and the elements of Right that are not equivalent to some element of Left. function Overlap (Left, Right : Set) return Boolean; If an element of Left is equivalent to some element of Right, then Overlap returns True. Otherwise, it returns False. function Is_Subset (Subset : Set; Of_Set : Set) return Boolean; If an element of Subset is not equivalent to some element of Of_Set, then Is_Subset returns False. Otherwise, it returns True. function First (Container : Set) return Cursor; If Length (Container) = 0, then First returns No_Element. Otherwise, First returns a cursor that designates the first element in Container. function Next (Position : Cursor) return Cursor; Returns a cursor that designates the successor of the element designated by Position. If Position designates the last element, then No_Element is returned. If Position equals No_Element, then No_Element is returned. procedure Next (Position : in out Cursor); Equivalent to Position := Next (Position). This paragraph was deleted. function Find (Container : Set; Item : Element_Type) return Cursor; If Length (Container) equals 0, then Find returns No_Element. Otherwise, Find checks if an element equivalent to Item is present in Container. If a match is found, a cursor designating the matching element is returned; otherwise, No_Element is returned. function Contains (Container : Set; Item : Element_Type) return Boolean; Equivalent to Find (Container, Item) /= No_Element. Paragraphs 83 and 84 were moved above. A.18.7 Sets 13 December 2012 524 Ada Reference Manual — 2012 Edition procedure Iterate (Container : in Set; Process : not null access procedure (Position : in Cursor)); Iterate calls Process.all with a cursor that designates each element in Container, starting with the first element and moving the cursor according to the successor relation. Tampering with the cursors of Container is prohibited during the execution of a call on Process.all. Any exception raised by Process.all is propagated. Both Containers.Hashed_Set and Containers.Ordered_Set declare a nested generic package Generic_Keys, which provides operations that allow set manipulation in terms of a key (typically, a portion of an element) instead of a complete element. The formal function Key of Generic_Keys extracts a key value from an element. It is expected to return the same value each time it is called with a particular element. The behavior of Generic_Keys is unspecified if Key behaves in some other manner. A key is expected to unambiguously determine a single equivalence class for elements. The behavior of Generic_Keys is unspecified if the formal parameters of this package behave in some other manner. function Key (Position : Cursor) return Key_Type; Equivalent to Key (Element (Position)). The subprograms in package Generic_Keys named Contains, Find, Element, Delete, and Exclude, are equivalent to the corresponding subprograms in the parent package, with the difference that the Key parameter is used to locate an element in the set. procedure Replace (Container : in out Set; Key : in Key_Type; New_Item : in Element_Type); Equivalent to Replace_Element (Container, Find (Container, Key), New_Item). procedure Update_Element_Preserving_Key (Container : in out Set; Position : in Cursor; Process : not null access procedure (Element : in out Element_Type)); If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element in Container, then Program_Error is propagated. Otherwise, Update_- Element_Preserving_Key uses Key to save the key value K of the element designated by Position. Update_Element_Preserving_Key then calls Process.all with that element as the argument. Tampering with the elements of Container is prohibited during the execution of the call on Process.all. Any exception raised by Process.all is propagated. After Process.all returns, Update_Element_Preserving_Key checks if K determines the same equivalence class as that for the new element; if not, the element is removed from the set and Program_Error is propagated. 85/2 86/3 87/2 88/2 89/2 90/2 91/2 92/2 93/2 94/2 95/3 If Element_Type is unconstrained and definite, then the actual Element parameter of Process.all shall be unconstrained. 96/2 type Reference_Type (Element : not null access Element_Type) is private with Implicit_Dereference => Element; The type Reference_Type needs finalization. The default initialization of an object of type Reference_Type propagates Program_Error. 96.1/3 96.2/3 96.3/3 525 13 December 2012 Sets A.18.7 Ada Reference Manual — 2012 Edition function Reference_Preserving_Key (Container : aliased in out Set; Position : in Cursor) return Reference_Type; This function (combined with the Implicit_Dereference aspect) provides a convenient way to gain read and write access to an individual element of a set given a cursor. in Container, then Program_Error If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element is propagated. Otherwise, Reference_Preserving_Key uses Key to save the key value K; then returns an object whose discriminant is an access value that designates the element designated by Position. Tampering with returned by Reference_Preserving_Key exists and has not been finalized. When the object returned by Reference_Preserving_Key is finalized, a check is made if K determines the same equivalence class as that for the new element; if not, the element is removed from the set and Program_Error is propagated. elements of Container is prohibited while the object the function Constant_Reference (Container : aliased in Set; Key : in Key_Type) return Constant_Reference_Type; This function (combined with the Implicit_Dereference aspect) provides a convenient way to gain read access to an individual element of a set given a key value. Equivalent to Constant_Reference (Container, Find (Container, Key)). function Reference_Preserving_Key (Container : aliased in out Set; Key : in Key_Type) return Reference_Type; This function (combined with the Implicit_Dereference aspect) provides a convenient way to gain read and write access to an individual element of a set given a key value. 96.4/3 96.5/3 96.6/3 96.7/3 96.8/3 96.9/3 96.10/3 96.11/3 96.12/3 Equivalent to Reference_Preserving_Key (Container, Find (Container, Key)). 96.13/3 96.14/3 97/2 98/2 98.1/3 Bounded (Run-Time) Errors It is a bounded error for the actual function associated with a generic formal subprogram, when called as part of an operation of a set package, to tamper with elements of any set parameter of the operation. Either Program_Error is raised, or the operation works as defined on the value of the set either prior to, or subsequent to, some or all of the modifications to the set. It is a bounded error to call any subprogram declared in the visible part of a set package when the associated container has been finalized. If the operation takes Container as an in out parameter, then it raises Constraint_Error or Program_Error. Otherwise, the operation either proceeds as it would for an empty container, or it raises Constraint_Error or Program_Error. Erroneous Execution A Cursor value is invalid if any of the following have occurred since it was created: • The set that contains the element it designates has been finalized; • The set that contains the element it designates has been used as the Target of a call to Assign, or as the target of an assignment_statement; 99/2 • The set that contains the element it designates has been used as the Source or Target of a call to Move; or 100/3 • The element it designates has been removed from the set that previously contained the element. A.18.7 Sets 13 December 2012 526 Ada Reference Manual — 2012 Edition The result of "=" or Has_Element is unspecified if these functions are called with an invalid cursor parameter. Execution is erroneous if any other subprogram declared in Containers.Hashed_Sets or Containers.Ordered_Sets is called with an invalid cursor parameter. 101/2 Execution is erroneous if the set associated with the result of a call to Reference or Constant_Reference is finalized before the result object returned by the call to Reference or Constant_Reference is finalized. 101.1/3 No storage associated with a Set object shall be lost upon assignment or scope exit. Implementation Requirements The execution of an assignment_statement for a set shall have the effect of copying the elements from the source set object to the target set object and changing the length of the target object to that of the source object. Move should not copy elements, and should minimize copying of internal data structures. Implementation Advice If an exception is propagated from a set operation, no storage should be lost, nor any elements removed from a set unless specified by the operation. A.18.8 The Generic Package Containers.Hashed_Sets The generic library package Containers.Hashed_Sets has the following declaration: Static Semantics with Ada.Iterator_Interfaces; generic type Element_Type is private; with function Hash (Element : Element_Type) return Hash_Type; with function Equivalent_Elements (Left, Right : Element_Type) return Boolean; with function "=" (Left, Right : Element_Type) return Boolean is <>; package Ada.Containers.Hashed_Sets is pragma Preelaborate(Hashed_Sets); pragma Remote_Types(Hashed_Sets); type Set is tagged private with Constant_Indexing => Constant_Reference, Default_Iterator => Iterate, Iterator_Element => Element_Type; pragma Preelaborable_Initialization(Set); type Cursor is private; pragma Preelaborable_Initialization(Cursor); Empty_Set : constant Set; No_Element : constant Cursor; function Has_Element (Position : Cursor) return Boolean; package Set_Iterator_Interfaces is new Ada.Iterator_Interfaces (Cursor, Has_Element); function "=" (Left, Right : Set) return Boolean; function Equivalent_Sets (Left, Right : Set) return Boolean; function To_Set (New_Item : Element_Type) return Set; function Capacity (Container : Set) return Count_Type; procedure Reserve_Capacity (Container : in out Set; Capacity : in Count_Type); 102/2 103/3 104/2 105/2 1/2 2/3 3/3 4/2 5/2 6/2 6.1/3 6.2/3 7/2 8/2 9/2 10/2 11/2 527 13 December 2012 Sets A.18.7 Ada Reference Manual — 2012 Edition 12/2 13/2 14/2 15/2 16/2 17/2 17.1/3 17.2/3 17.3/3 17.4/3 18/2 19/2 20/2 21/2 22/2 23/2 24/2 25/2 26/2 27/2 28/2 29/2 30/2 31/2 32/2 33/2 34/2 35/2 36/2 37/2 function Length (Container : Set) return Count_Type; function Is_Empty (Container : Set) return Boolean; procedure Clear (Container : in out Set); function Element (Position : Cursor) return Element_Type; procedure Replace_Element (Container : in out Set; Position : in Cursor; New_Item : in Element_Type); procedure Query_Element (Position : in Cursor; Process : not null access procedure (Element : in Element_Type)); type Constant_Reference_Type (Element : not null access constant Element_Type) is private with Implicit_Dereference => Element; function Constant_Reference (Container : aliased in Set; Position : in Cursor) return Constant_Reference_Type; procedure Assign (Target : in out Set; Source : in Set); function Copy (Source : Set; Capacity : Count_Type := 0) return Set; procedure Move (Target : in out Set; Source : in out Set); procedure Insert (Container : in out Set; New_Item : in Element_Type; Position : out Cursor; Inserted : out Boolean); procedure Insert (Container : in out Set; New_Item : in Element_Type); procedure Include (Container : in out Set; New_Item : in Element_Type); procedure Replace (Container : in out Set; New_Item : in Element_Type); procedure Exclude (Container : in out Set; Item : in Element_Type); procedure Delete (Container : in out Set; Item : in Element_Type); procedure Delete (Container : in out Set; Position : in out Cursor); procedure Union (Target : in out Set; Source : in Set); function Union (Left, Right : Set) return Set; function "or" (Left, Right : Set) return Set renames Union; procedure Intersection (Target : in out Set; Source : in Set); function Intersection (Left, Right : Set) return Set; function "and" (Left, Right : Set) return Set renames Intersection; procedure Difference (Target : in out Set; Source : in Set); function Difference (Left, Right : Set) return Set; function "-" (Left, Right : Set) return Set renames Difference; procedure Symmetric_Difference (Target : in out Set; Source : in Set); function Symmetric_Difference (Left, Right : Set) return Set; function "xor" (Left, Right : Set) return Set renames Symmetric_Difference; A.18.8 The Generic Package Containers.Hashed_Sets 13 December 2012 528 Ada Reference Manual — 2012 Edition function Overlap (Left, Right : Set) return Boolean; function Is_Subset (Subset : Set; Of_Set : Set) return Boolean; function First (Container : Set) return Cursor; function Next (Position : Cursor) return Cursor; procedure Next (Position : in out Cursor); function Find (Container : Set; Item : Element_Type) return Cursor; function Contains (Container : Set; Item : Element_Type) return Boolean; This paragraph was deleted. function Equivalent_Elements (Left, Right : Cursor) return Boolean; function Equivalent_Elements (Left : Cursor; Right : Element_Type) return Boolean; function Equivalent_Elements (Left : Element_Type; Right : Cursor) return Boolean; procedure Iterate (Container : in Set; Process : not null access procedure (Position : in Cursor)); function Iterate (Container : in Set) return Set_Iterator_Interfaces.Forward_Iterator'Class; generic type Key_Type (<>) is private; with function Key (Element : Element_Type) return Key_Type; with function Hash (Key : Key_Type) return Hash_Type; with function Equivalent_Keys (Left, Right : Key_Type) return Boolean; package Generic_Keys is function Key (Position : Cursor) return Key_Type; function Element (Container : Set; Key : Key_Type) return Element_Type; procedure Replace (Container : in out Set; Key : in Key_Type; New_Item : in Element_Type); procedure Exclude (Container : in out Set; Key : in Key_Type); procedure Delete (Container : in out Set; Key : in Key_Type); function Find (Container : Set; Key : Key_Type) return Cursor; function Contains (Container : Set; Key : Key_Type) return Boolean; procedure Update_Element_Preserving_Key (Container : in out Set; Position : in Cursor; Process : not null access procedure (Element : in out Element_Type)); type Reference_Type (Element : not null access Element_Type) is private with Implicit_Dereference => Element; 38/2 39/2 40/2 41/2 42/2 43/2 44/2 45/3 46/2 47/2 48/2 49/2 49.1/3 50/2 51/2 52/2 53/2 54/2 55/2 56/2 57/2 58/2 58.1/3 529 13 December 2012 The Generic Package Containers.Hashed_Sets A.18.8 Ada Reference Manual — 2012 Edition 58.2/3 58.3/3 58.4/3 59/2 60/2 61/2 62/2 63/2 function Reference_Preserving_Key (Container : aliased in out Set; Position : in Cursor) return Reference_Type; function Constant_Reference (Container : aliased in Set; Key : in Key_Type) return Constant_Reference_Type; function Reference_Preserving_Key (Container : aliased in out Set; Key : in Key_Type) return Reference_Type; end Generic_Keys; private ... -- not specified by the language end Ada.Containers.Hashed_Sets; An object of type Set contains an expandable hash table, which is used to provide direct access to elements. The capacity of an object of type Set is the maximum number of elements that can be inserted into the hash table prior to it being automatically expanded. 64/2 Two elements E1 and E2 are defined to be equivalent if Equivalent_Elements (E1, E2) returns True. 65/2 66/2 The actual function for the generic formal function Hash is expected to return the same value each time it is called with a particular element value. For any two equivalent elements, the actual for Hash is expected to return the same value. If the actual for Hash behaves in some other manner, the behavior of this package is unspecified. Which subprograms of this package call Hash, and how many times they call it, is unspecified. The actual function for the generic formal function Equivalent_Elements is expected to return the same value each time it is called with a particular pair of Element values. It should define an equivalence relationship, that is, be reflexive, symmetric, and transitive. If the actual for Equivalent_Elements behaves in some other manner, the behavior of this package is unspecified. Which subprograms of this package call Equivalent_Elements, and how many times they call it, is unspecified. 66.1/3 If the actual function for the generic formal function "=" returns True for any pair of nonequivalent elements, then the behavior of the container function "=" is unspecified. 67/2 68/2 69/2 70/2 71/2 72/2 If the value of an element stored in a set is changed other than by an operation in this package such that at least one of Hash or Equivalent_Elements give different results, the behavior of this package is unspecified. Which elements are the first element and the last element of a set, and which element is the successor of a given element, are unspecified, other than the general semantics described in A.18.7. function Capacity (Container : Set) return Count_Type; Returns the capacity of Container. procedure Reserve_Capacity (Container : in out Set; Capacity : in Count_Type); Reserve_Capacity allocates a new hash table such that the length of the resulting set can become at least the value Capacity without requiring an additional call to Reserve_Capacity, and is large enough to hold the current length of Container. Reserve_Capacity then rehashes the elements in Container onto the new hash table. It replaces the old hash table with the new hash table, and then deallocates the old hash table. Any exception raised during allocation is propagated and Container is not modified. 73/2 Reserve_Capacity tampers with the cursors of Container. A.18.8 The Generic Package Containers.Hashed_Sets 13 December 2012 530 Ada Reference Manual — 2012 Edition procedure Clear (Container : in out Set); In addition to the semantics described in A.18.7, Clear does not affect the capacity of Container. procedure Assign (Target : in out Set; Source : in Set); In addition to the semantics described in A.18.7, if the length of Source is greater than the capacity of Target, Reserve_Capacity (Target, Length (Source)) is called before assigning any elements. function Copy (Source : Set; Capacity : Count_Type := 0) return Set; Returns a set whose elements are initialized from the elements of Source. If Capacity is 0, then the set capacity is the length of Source; if Capacity is equal to or greater than the length of Source, the set capacity is at least the specified value. Otherwise, the operation propagates Capacity_Error. procedure Insert (Container : in out Set; New_Item : in Element_Type; Position : out Cursor; Inserted : out Boolean); In addition to the semantics described in A.18.7, if Length (Container) equals Capacity (Container), then Insert first calls Reserve_Capacity to increase the capacity of Container to some larger value. function First (Container : Set) return Cursor; If Length (Container) = 0, then First returns No_Element. Otherwise, First returns a cursor that designates the first hashed element in Container. function Equivalent_Elements (Left, Right : Cursor) return Boolean; Equivalent to Equivalent_Elements (Element (Left), Element (Right)). function Equivalent_Elements (Left : Cursor; Right : Element_Type) return Boolean; Equivalent to Equivalent_Elements (Element (Left), Right). function Equivalent_Elements (Left : Element_Type; Right : Cursor) return Boolean; Equivalent to Equivalent_Elements (Left, Element (Right)). function Iterate (Container : in Set) return Set_Iterator_Interfaces.Forward_Iterator'Class; Iterate returns an iterator object (see 5.5.1) that will generate a value for a loop parameter (see 5.5.2) designating each element in Container, starting with the first element and moving the cursor according to the successor relation. Tampering with the cursors of Container is prohibited while the iterator object exists (in particular, in the sequence_of_statements of the loop_statement whose iterator_specification denotes this object). The iterator object needs finalization. 74/2 75/2 75.1/3 75.2/3 75.3/3 75.4/3 76/2 77/2 78/2 79/2 80/2 81/2 82/2 83/2 84/2 85/2 85.1/3 85.2/3 For any element E, the actual function for the generic formal function Generic_Keys.Hash is expected to be such that Hash (E) = Generic_Keys.Hash (Key (E)). If the actuals for Key or Generic_Keys.Hash behave in some other manner, the behavior of Generic_Keys is unspecified. Which subprograms of Generic_Keys call Generic_Keys.Hash, and how many times they call it, is unspecified. 86/2 531 13 December 2012 The Generic Package Containers.Hashed_Sets A.18.8 Ada Reference Manual — 2012 Edition For any two elements E1 and E2, the boolean values Equivalent_Elements (E1, E2) and Equivalent_Keys (Key (E1), Key (E2)) are expected to be equal. If the actuals for Key or Equivalent_Keys behave in some other manner, the behavior of Generic_Keys is unspecified. Which subprograms of Generic_Keys call Equivalent_Keys, and how many times they call it, is unspecified. Implementation Advice If N is the length of a set, the average time complexity of the subprograms Insert, Include, Replace, Delete, Exclude and Find that take an element parameter should be O(log N). The average time complexity of the subprograms that take a cursor parameter should be O(1). The average time complexity of Reserve_Capacity should be O(N). A.18.9 The Generic Package Containers.Ordered_Sets The generic library package Containers.Ordered_Sets has the following declaration: Static Semantics with Ada.Iterator_Interfaces; generic type Element_Type is private; with function "<" (Left, Right : Element_Type) return Boolean is <>; with function "=" (Left, Right : Element_Type) return Boolean is <>; package Ada.Containers.Ordered_Sets is pragma Preelaborate(Ordered_Sets); pragma Remote_Types(Ordered_Sets); function Equivalent_Elements (Left, Right : Element_Type) return Boolean; type Set is tagged private with Constant_Indexing => Constant_Reference, Default_Iterator => Iterate, Iterator_Element => Element_Type; pragma Preelaborable_Initialization(Set); type Cursor is private; pragma Preelaborable_Initialization(Cursor); Empty_Set : constant Set; No_Element : constant Cursor; function Has_Element (Position : Cursor) return Boolean; package Set_Iterator_Interfaces is new Ada.Iterator_Interfaces (Cursor, Has_Element); function "=" (Left, Right : Set) return Boolean; function Equivalent_Sets (Left, Right : Set) return Boolean; function To_Set (New_Item : Element_Type) return Set; function Length (Container : Set) return Count_Type; function Is_Empty (Container : Set) return Boolean; procedure Clear (Container : in out Set); function Element (Position : Cursor) return Element_Type; procedure Replace_Element (Container : in out Set; Position : in Cursor; New_Item : in Element_Type); procedure Query_Element (Position : in Cursor; Process : not null access procedure (Element : in Element_Type)); type Constant_Reference_Type (Element : not null access constant Element_Type) is private with Implicit_Dereference => Element; 87/2 88/2 1/2 2/3 3/2 4/3 5/2 6/2 7/2 7.1/3 7.2/3 8/2 9/2 10/2 11/2 12/2 13/2 14/2 15/2 16/2 16.1/3 A.18.8 The Generic Package Containers.Hashed_Sets 13 December 2012 532 Ada Reference Manual — 2012 Edition function Constant_Reference (Container : aliased in Set; Position : in Cursor) return Constant_Reference_Type; procedure Assign (Target : in out Set; Source : in Set); function Copy (Source : Set) return Set; procedure Move (Target : in out Set; Source : in out Set); procedure Insert (Container : in out Set; New_Item : in Element_Type; Position : out Cursor; Inserted : out Boolean); procedure Insert (Container : in out Set; New_Item : in Element_Type); procedure Include (Container : in out Set; New_Item : in Element_Type); procedure Replace (Container : in out Set; New_Item : in Element_Type); procedure Exclude (Container : in out Set; Item : in Element_Type); procedure Delete (Container : in out Set; Item : in Element_Type); procedure Delete (Container : in out Set; Position : in out Cursor); procedure Delete_First (Container : in out Set); procedure Delete_Last (Container : in out Set); procedure Union (Target : in out Set; Source : in Set); function Union (Left, Right : Set) return Set; function "or" (Left, Right : Set) return Set renames Union; procedure Intersection (Target : in out Set; Source : in Set); function Intersection (Left, Right : Set) return Set; function "and" (Left, Right : Set) return Set renames Intersection; procedure Difference (Target : in out Set; Source : in Set); function Difference (Left, Right : Set) return Set; function "-" (Left, Right : Set) return Set renames Difference; procedure Symmetric_Difference (Target : in out Set; Source : in Set); function Symmetric_Difference (Left, Right : Set) return Set; function "xor" (Left, Right : Set) return Set renames Symmetric_Difference; function Overlap (Left, Right : Set) return Boolean; function Is_Subset (Subset : Set; Of_Set : Set) return Boolean; function First (Container : Set) return Cursor; function First_Element (Container : Set) return Element_Type; function Last (Container : Set) return Cursor; function Last_Element (Container : Set) return Element_Type; function Next (Position : Cursor) return Cursor; procedure Next (Position : in out Cursor); 16.2/3 16.3/3 16.4/3 17/2 18/2 19/2 20/2 21/2 22/2 23/2 24/2 25/2 26/2 27/2 28/2 29/2 30/2 31/2 32/2 33/2 34/2 35/2 36/2 37/2 38/2 39/2 40/2 41/2 42/2 43/2 44/2 45/2 46/2 533 13 December 2012 The Generic Package Containers.Ordered_Sets A.18.9 Ada Reference Manual — 2012 Edition 47/2 48/2 49/2 50/2 51/2 52/2 53/3 54/2 55/2 56/2 57/2 58/2 59/2 60/2 61/2 61.1/3 61.2/3 62/2 63/2 64/2 65/2 66/2 67/2 68/2 function Previous (Position : Cursor) return Cursor; procedure Previous (Position : in out Cursor); function Find (Container : Set; Item : Element_Type) return Cursor; function Floor (Container : Set; Item : Element_Type) return Cursor; function Ceiling (Container : Set; Item : Element_Type) return Cursor; function Contains (Container : Set; Item : Element_Type) return Boolean; This paragraph was deleted. function "<" (Left, Right : Cursor) return Boolean; function ">" (Left, Right : Cursor) return Boolean; function "<" (Left : Cursor; Right : Element_Type) return Boolean; function ">" (Left : Cursor; Right : Element_Type) return Boolean; function "<" (Left : Element_Type; Right : Cursor) return Boolean; function ">" (Left : Element_Type; Right : Cursor) return Boolean; procedure Iterate (Container : in Set; Process : not null access procedure (Position : in Cursor)); procedure Reverse_Iterate (Container : in Set; Process : not null access procedure (Position : in Cursor)); function Iterate (Container : in Set) return Set_Iterator_Interfaces.Reversible_Iterator'Class; function Iterate (Container : in Set; Start : in Cursor) return Set_Iterator_Interfaces.Reversible_Iterator'Class; generic type Key_Type (<>) is private; with function Key (Element : Element_Type) return Key_Type; with function "<" (Left, Right : Key_Type) return Boolean is <>; package Generic_Keys is function Equivalent_Keys (Left, Right : Key_Type) return Boolean; function Key (Position : Cursor) return Key_Type; function Element (Container : Set; Key : Key_Type) return Element_Type; procedure Replace (Container : in out Set; Key : in Key_Type; New_Item : in Element_Type); procedure Exclude (Container : in out Set; Key : in Key_Type); procedure Delete (Container : in out Set; Key : in Key_Type); A.18.9 The Generic Package Containers.Ordered_Sets 13 December 2012 534 Ada Reference Manual — 2012 Edition function Find (Container : Set; Key : Key_Type) return Cursor; function Floor (Container : Set; Key : Key_Type) return Cursor; function Ceiling (Container : Set; Key : Key_Type) return Cursor; function Contains (Container : Set; Key : Key_Type) return Boolean; procedure Update_Element_Preserving_Key (Container : in out Set; Position : in Cursor; Process : not null access procedure (Element : in out Element_Type)); type Reference_Type (Element : not null access Element_Type) is private with Implicit_Dereference => Element; function Reference_Preserving_Key (Container : aliased in out Set; Position : in Cursor) return Reference_Type; function Constant_Reference (Container : aliased in Set; Key : in Key_Type) return Constant_Reference_Type; function Reference_Preserving_Key (Container : aliased in out Set; Key : in Key_Type) return Reference_Type; end Generic_Keys; private ... -- not specified by the language end Ada.Containers.Ordered_Sets; Two elements E1 and E2 are equivalent if both E1 < E2 and E2 < E1 return False, using the generic formal "<" operator for elements. Function Equivalent_Elements returns True if Left and Right are equivalent, and False otherwise. The actual function for the generic formal function "<" on Element_Type values is expected to return the same value each time it is called with a particular pair of key values. It should define a strict weak ordering relationship (see A.18). If the actual for "<" behaves in some other manner, the behavior of this package is unspecified. Which subprograms of this package call "<" and how many times they call it, is unspecified. 69/2 70/2 71/2 72/2 73/2 73.1/3 73.2/3 73.3/3 73.4/3 74/2 75/2 76/2 77/2 78/2 79/3 If the actual function for the generic formal function "=" returns True for any pair of nonequivalent elements, then the behavior of the container function "=" is unspecified. 79.1/3 If the value of an element stored in a set is changed other than by an operation in this package such that at least one of "<" or "=" give different results, the behavior of this package is unspecified. The first element of a nonempty set is the one which is less than all the other elements in the set. The last element of a nonempty set is the one which is greater than all the other elements in the set. The successor of an element is the smallest element that is larger than the given element. The predecessor of an element is the largest element that is smaller than the given element. All comparisons are done using the generic formal "<" operator for elements. 80/2 81/3 535 13 December 2012 The Generic Package Containers.Ordered_Sets A.18.9 Ada Reference Manual — 2012 Edition 81.1/3 81.2/3 82/2 83/3 84/2 85/3 86/2 87/2 88/2 89/2 90/2 91/2 92/2 93/3 94/2 95/2 96/2 97/3 98/2 99/3 100/2 101/2 102/2 103/2 104/2 105/2 106/2 107/2 function Copy (Source : Set) return Set; Returns a set whose elements are initialized from the corresponding elements of Source. procedure Delete_First (Container : in out Set); If Container is empty, Delete_First has no effect. Otherwise, the element designated by First (Container) is removed from Container. Delete_First tampers with the cursors of Container. procedure Delete_Last (Container : in out Set); If Container is empty, Delete_Last has no effect. Otherwise, the element designated by Last (Container) is removed from Container. Delete_Last tampers with the cursors of Container. function First_Element (Container : Set) return Element_Type; Equivalent to Element (First (Container)). function Last (Container : Set) return Cursor; Returns a cursor that designates the last element in Container. If Container is empty, returns No_Element. function Last_Element (Container : Set) return Element_Type; Equivalent to Element (Last (Container)). function Previous (Position : Cursor) return Cursor; If Position equals No_Element, then Previous returns No_Element. Otherwise, Previous returns a cursor designating the predecessor element of the one designated by Position. If Position designates the first element, then Previous returns No_Element. procedure Previous (Position : in out Cursor); Equivalent to Position := Previous (Position). function Floor (Container : Set; Item : Element_Type) return Cursor; Floor searches for the last element which is not greater than Item. If such an element is found, a cursor that designates it is returned. Otherwise, No_Element is returned. function Ceiling (Container : Set; Item : Element_Type) return Cursor; Ceiling searches for the first element which is not less than Item. If such an element is found, a cursor that designates it is returned. Otherwise, No_Element is returned. function "<" (Left, Right : Cursor) return Boolean; Equivalent to Element (Left) < Element (Right). function ">" (Left, Right : Cursor) return Boolean; Equivalent to Element (Right) < Element (Left). function "<" (Left : Cursor; Right : Element_Type) return Boolean; Equivalent to Element (Left) < Right. function ">" (Left : Cursor; Right : Element_Type) return Boolean; Equivalent to Right < Element (Left). A.18.9 The Generic Package Containers.Ordered_Sets 13 December 2012 536 Ada Reference Manual — 2012 Edition function "<" (Left : Element_Type; Right : Cursor) return Boolean; Equivalent to Left < Element (Right). function ">" (Left : Element_Type; Right : Cursor) return Boolean; Equivalent to Element (Right) < Left. procedure Reverse_Iterate (Container : in Set; Process : not null access procedure (Position : in Cursor)); 108/2 109/2 110/2 111/2 112/2 Iterates over the elements in Container as per procedure Iterate, with the difference that the elements are traversed in predecessor order, starting with the last element. 113/3 function Iterate (Container : in Set) return Set_Iterator_Interfaces.Reversible_Iterator'Class; Iterate returns a reversible iterator object (see 5.5.1) that will generate a value for a loop parameter (see 5.5.2) designating each element in Container, starting with the first element and moving the cursor according to the successor relation when used as a forward iterator, and starting with the last element and moving the cursor according to the predecessor relation when used as a reverse iterator. Tampering with the cursors of Container is prohibited while the iterator object exists (in particular, in the sequence_of_statements of the loop_statement whose iterator_specification denotes this object). The iterator object needs finalization. function Iterate (Container : in Set; Start : in Cursor) return Set_Iterator_Interfaces.Reversible_Iterator'Class; If Start is not No_Element and does not designate an item in Container, then Program_Error is propagated. If Start is No_Element, then Constraint_Error is propagated. Otherwise, Iterate returns a reversible iterator object (see 5.5.1) that will generate a value for a loop parameter (see 5.5.2) designating each element in Container, starting with the element designated by Start and moving the cursor according to the successor relation when used as a forward iterator, or moving the cursor according to the predecessor relation when used as a reverse iterator. Tampering with the cursors of Container is prohibited while the iterator object exists (in particular, in the sequence_of_statements of the loop_statement whose iterator_specification denotes this object). The iterator object needs finalization. For any two elements E1 and E2, the boolean values (E1 < E2) and (Key(E1) < Key(E2)) are expected to be equal. If the actuals for Key or Generic_Keys."<" behave in some other manner, the behavior of this package is unspecified. Which subprograms of this package call Key and Generic_Keys."<", and how many times the functions are called, is unspecified. In addition to the semantics described in A.18.7, the subprograms in package Generic_Keys named Floor and Ceiling, are equivalent to the corresponding subprograms in the parent package, with the difference that the Key subprogram parameter is compared to elements in the container using the Key and "<" generic formal functions. The function named Equivalent_Keys in package Generic_Keys returns True if both Left < Right and Right < Left return False using the generic formal "<" operator, and returns True otherwise. 113.1/3 113.2/3 113.3/3 113.4/3 114/2 115/2 If N is the length of a set, then the worst-case time complexity of the Insert, Include, Replace, Delete, Exclude and Find operations that take an element parameter should be O((log N)**2) or better. The worst- case time complexity of the subprograms that take a cursor parameter should be O(1). 116/2 Implementation Advice 537 13 December 2012 The Generic Package Containers.Ordered_Sets A.18.9 Ada Reference Manual — 2012 Edition A.18.10 The Generic Package Containers.Multiway_Trees The language-defined generic package Containers.Multiway_Trees provides private types Tree and Cursor, and a set of operations for each type. A multiway tree container is well-suited to represent nested structures. A multiway tree container object manages a tree of internal nodes, each of which contains an element and pointers to the parent, first child, last child, next (successor) sibling, and previous (predecessor) sibling internal nodes. A cursor designates a particular node within a tree (and by extension the element contained in that node, if any). A cursor keeps designating the same node (and element) as long as the node is part of the container, even if the node is moved within the container. A subtree is a particular node (which roots the subtree) and all of its child nodes (including all of the children of the child nodes, recursively). There is a special node, the root, which is always present and has neither an associated element value nor any parent node. The root node provides a place to add nodes to an otherwise empty tree and represents the base of the tree. A node that has no children is called a leaf node. The ancestors of a node are the node itself, its parent node, the parent of the parent node, and so on until a node with no parent is reached. Similarly, the descendants of a node are the node itself, its child nodes, the children of each child node, and so on. The nodes of a subtree can be visited in several different orders. For a depth-first order, after visiting a node, the nodes of its child list are each visited in depth-first order, with each child node visited in natural order (first child to last child). The generic library package Containers.Multiway_Trees has the following declaration: Static Semantics with Ada.Iterator_Interfaces; generic type Element_Type is private; with function "=" (Left, Right : Element_Type) return Boolean is <>; package Ada.Containers.Multiway_Trees is pragma Preelaborate(Multiway_Trees); pragma Remote_Types(Multiway_Trees); type Tree is tagged private with Constant_Indexing => Constant_Reference, Variable_Indexing => Reference, Default_Iterator => Iterate, Iterator_Element => Element_Type; pragma Preelaborable_Initialization(Tree); type Cursor is private; pragma Preelaborable_Initialization(Cursor); Empty_Tree : constant Tree; No_Element : constant Cursor; function Has_Element (Position : Cursor) return Boolean; package Tree_Iterator_Interfaces is new Ada.Iterator_Interfaces (Cursor, Has_Element); function Equal_Subtree (Left_Position : Cursor; Right_Position: Cursor) return Boolean; function "=" (Left, Right : Tree) return Boolean; function Is_Empty (Container : Tree) return Boolean; function Node_Count (Container : Tree) return Count_Type; 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 14/3 15/3 16/3 17/3 A.18.10 The Generic Package Containers.Multiway_Trees 13 December 2012 538 Ada Reference Manual — 2012 Edition function Subtree_Node_Count (Position : Cursor) return Count_Type; function Depth (Position : Cursor) return Count_Type; function Is_Root (Position : Cursor) return Boolean; function Is_Leaf (Position : Cursor) return Boolean; function Root (Container : Tree) return Cursor; procedure Clear (Container : in out Tree); function Element (Position : Cursor) return Element_Type; procedure Replace_Element (Container : in out Tree; Position : in Cursor; New_Item : in Element_Type); procedure Query_Element (Position : in Cursor; Process : not null access procedure (Element : in Element_Type)); procedure Update_Element (Container : in out Tree; Position : in Cursor; Process : not null access procedure (Element : in out Element_Type)); type Constant_Reference_Type (Element : not null access constant Element_Type) is private with Implicit_Dereference => Element; type Reference_Type (Element : not null access Element_Type) is private with Implicit_Dereference => Element; function Constant_Reference (Container : aliased in Tree; Position : in Cursor) return Constant_Reference_Type; function Reference (Container : aliased in out Tree; Position : in Cursor) return Reference_Type; procedure Assign (Target : in out Tree; Source : in Tree); function Copy (Source : Tree) return Tree; procedure Move (Target : in out Tree; Source : in out Tree); procedure Delete_Leaf (Container : in out Tree; Position : in out Cursor); procedure Delete_Subtree (Container : in out Tree; Position : in out Cursor); procedure Swap (Container : in out Tree; I, J : in Cursor); function Find (Container : Tree; Item : Element_Type) return Cursor; function Find_In_Subtree (Position : Cursor; Item : Element_Type) return Cursor; function Ancestor_Find (Position : Cursor; Item : Element_Type) return Cursor; function Contains (Container : Tree; Item : Element_Type) return Boolean; procedure Iterate (Container : in Tree; Process : not null access procedure (Position : in Cursor)); 18/3 19/3 20/3 21/3 22/3 23/3 24/3 25/3 26/3 27/3 28/3 29/3 30/3 31/3 32/3 33/3 34/3 35/3 36/3 37/3 38/3 39/3 40/3 41/3 42/3 539 13 December 2012 The Generic Package Containers.Multiway_Trees A.18.10 Ada Reference Manual — 2012 Edition 43/3 44/3 45/3 46/3 47/3 48/3 49/3 50/3 51/3 52/3 53/3 54/3 55/3 56/3 57/3 58/3 59/3 procedure Iterate_Subtree (Position : in Cursor; Process : not null access procedure (Position : in Cursor)); function Iterate (Container : in Tree) return Tree_Iterator_Interfaces.Forward_Iterator'Class; function Iterate_Subtree (Position : in Cursor) return Tree_Iterator_Interfaces.Forward_Iterator'Class; function Child_Count (Parent : Cursor) return Count_Type; function Child_Depth (Parent, Child : Cursor) return Count_Type; procedure Insert_Child (Container : in out Tree; Parent : in Cursor; Before : in Cursor; New_Item : in Element_Type; Count : in Count_Type := 1); procedure Insert_Child (Container : in out Tree; Parent : in Cursor; Before : in Cursor; New_Item : in Element_Type; Position : out Cursor; Count : in Count_Type := 1); procedure Insert_Child (Container : in out Tree; Parent : in Cursor; Before : in Cursor; Position : out Cursor; Count : in Count_Type := 1); procedure Prepend_Child (Container : in out Tree; Parent : in Cursor; New_Item : in Element_Type; Count : in Count_Type := 1); procedure Append_Child (Container : in out Tree; Parent : in Cursor; New_Item : in Element_Type; Count : in Count_Type := 1); procedure Delete_Children (Container : in out Tree; Parent : in Cursor); procedure Copy_Subtree (Target : in out Tree; Parent : in Cursor; Before : in Cursor; Source : in Cursor); procedure Splice_Subtree (Target : in out Tree; Parent : in Cursor; Before : in Cursor; Source : in out Tree; Position : in out Cursor); procedure Splice_Subtree (Container: in out Tree; Parent : in Cursor; Before : in Cursor; Position : in Cursor); procedure Splice_Children (Target : in out Tree; Target_Parent : in Cursor; Before : in Cursor; Source : in out Tree; Source_Parent : in Cursor); procedure Splice_Children (Container : in out Tree; Target_Parent : in Cursor; Before : in Cursor; Source_Parent : in Cursor); function Parent (Position : Cursor) return Cursor; A.18.10 The Generic Package Containers.Multiway_Trees 13 December 2012 540 Ada Reference Manual — 2012 Edition function First_Child (Parent : Cursor) return Cursor; function First_Child_Element (Parent : Cursor) return Element_Type; function Last_Child (Parent : Cursor) return Cursor; function Last_Child_Element (Parent : Cursor) return Element_Type; function Next_Sibling (Position : Cursor) return Cursor; function Previous_Sibling (Position : Cursor) return Cursor; procedure Next_Sibling (Position : in out Cursor); procedure Previous_Sibling (Position : in out Cursor); procedure Iterate_Children (Parent : in Cursor; Process : not null access procedure (Position : in Cursor)); procedure Reverse_Iterate_Children (Parent : in Cursor; Process : not null access procedure (Position : in Cursor)); function Iterate_Children (Container : in Tree; Parent : in Cursor) return Tree_Iterator_Interfaces.Reversible_Iterator'Class; private ... -- not specified by the language end Ada.Containers.Multiway_Trees; The actual function for the generic formal function "=" on Element_Type values is expected to define a reflexive and symmetric relationship and return the same result value each time it is called with a particular pair of values. If it behaves in some other manner, the functions Find, Reverse_Find, Equal_Subtree, and "=" on tree values return an unspecified value. The exact arguments and number of calls of this generic formal function by the functions Find, Reverse_Find, Equal_Subtree, and "=" on tree values are unspecified. The type Tree is used to represent trees. The type Tree needs finalization (see 7.6). Empty_Tree represents the empty Tree object. It contains only the root node (Node_Count (Empty_Tree) returns 1). If an object of type Tree is not otherwise initialized, it is initialized to the same value as Empty_Tree. No_Element represents a cursor that designates no element. If an object of type Cursor is not otherwise initialized, it is initialized to the same value as No_Element. The predefined "=" operator for type Cursor returns True if both cursors are No_Element, or designate the same element in the same container. Execution of the default implementation of the Input, Output, Read, or Write attribute of type Cursor raises Program_Error. Tree'Write for a Tree object T writes Node_Count(T) - 1 elements of the tree to the stream. It also may write additional information about the tree. Tree'Read reads the representation of a tree from the stream, and assigns to Item a tree with the same elements and structure as was written by Tree'Write. Some operations of this generic package have access-to-subprogram parameters. To ensure such operations are well-defined, they guard against certain actions by the designated subprogram. In particular, some operations check for "tampering with cursors" of a container because they depend on the set of elements of the container remaining constant, and others check for "tampering with elements" of a container because they depend on elements of the container not being replaced. A subprogram is said to tamper with cursors of a tree object T if: 541 13 December 2012 The Generic Package Containers.Multiway_Trees A.18.10 60/3 61/3 62/3 63/3 64/3 65/3 66/3 67/3 68/3 69/3 70/3 71/3 72/3 73/3 74/3 75/3 76/3 77/3 78/3 79/3 80/3 81/3 Ada Reference Manual — 2012 Edition 82/3 83/3 84/3 85/3 86/3 87/3 88/3 89/3 90/3 91/3 92/3 93/3 94/3 95/3 96/3 97/3 98/3 99/3 100/3 • • • • • it inserts or deletes elements of T, that is, it calls the Clear, Delete_Leaf, Insert_Child, Delete_Children, Delete_Subtree, or Copy_Subtree procedures with T as a parameter; or it reorders the elements of T, that is, it calls the Splice_Subtree or Splice_Children procedures with T as a parameter; or it finalizes T; or it calls Assign with T as the Target parameter; or it calls the Move procedure with T as a parameter. A subprogram is said to tamper with elements of a tree object T if: • • it tampers with cursors of T; or it replaces one or more elements of T, that is, it calls the Replace_Element or Swap procedures with T as a parameter. When tampering with cursors is prohibited for a particular tree object T, Program_Error is propagated by a call of any language-defined subprogram that is defined to tamper with the cursors of T, leaving T unmodified. Similarly, when tampering with elements is prohibited for a particular tree object T, Program_Error is propagated by a call of any language-defined subprogram that is defined to tamper with the elements of T (or tamper with the cursors of T), leaving T unmodified. function Has_Element (Position : Cursor) return Boolean; Returns True if Position designates an element, and returns False otherwise. In particular, Has_Element returns False if the cursor designates a root node or equals No_Element. function Equal_Subtree (Left_Position : Cursor; Right_Position: Cursor) return Boolean; If Left_Position or Right_Position equals No_Element, propagates Constraint_Error. If the number of child nodes of the element designated by Left_Position is different from the number of child nodes of the element designated by Right_Position, the function returns False. If Left_Position designates a root node and Right_Position does not, the function returns False. If Right_Position designates a root node and Left_Position does not, the function returns False. Unless both cursors designate a root node, the elements are compared using the generic formal equality operator. If the result of the element comparison is False, the function returns False. Otherwise, it calls Equal_Subtree on a cursor designating each child element of the element designated by Left_Position and a cursor designating the corresponding child element of the element designated by Right_Position. If any such call returns False, the function returns False; otherwise, it returns True. Any exception raised during the evaluation of element equality is propagated. function "=" (Left, Right : Tree) return Boolean; If Left and Right denote the same tree object, then the function returns True. Otherwise, it calls Equal_Subtree with cursors designating the root nodes of Left and Right; the result is returned. Any exception raised during the evaluation of Equal_Subtree is propagated. function Node_Count (Container : Tree) return Count_Type; Node_Count returns the number of nodes in Container. function Subtree_Node_Count (Position : Cursor) return Count_Type; If Position is No_Element, Subtree_Node_Count returns 0; otherwise, Subtree_Node_Count returns the number of nodes in the subtree that is rooted by Position. A.18.10 The Generic Package Containers.Multiway_Trees 13 December 2012 542 Ada Reference Manual — 2012 Edition function Is_Empty (Container : Tree) return Boolean; Equivalent to Node_Count (Container) = 1. function Depth (Position : Cursor) return Count_Type; If Position equals No_Element, Depth returns 0; otherwise, Depth returns the number of ancestor nodes of the node designated by Position (including the node itself). function Is_Root (Position : Cursor) return Boolean; Is_Root returns True if the Position designates the root node of some tree; and returns False otherwise. function Is_Leaf (Position : Cursor) return Boolean; Is_Leaf returns True if Position designates a node that does not have any child nodes; and returns False otherwise. function Root (Container : Tree) return Cursor; Root returns a cursor that designates the root node of Container. procedure Clear (Container : in out Tree); Removes all the elements from Container. function Element (Position : Cursor) return Element_Type; If Position equals No_Element, then Constraint_Error is propagated; if Position designates the root node of a tree, then Program_Error is propagated. Otherwise, Element returns the element designated by Position. procedure Replace_Element (Container : in out Tree; Position : in Cursor; New_Item : in Element_Type); If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element in Container (including if it designates the root node), then Program_Error is propagated. Otherwise, Replace_Element assigns the value New_Item to the element designated by Position. procedure Query_Element (Position : in Cursor; Process : not null access procedure (Element : in Element_Type)); If Position equals No_Element, then Constraint_Error is propagated; if Position designates the root node of a tree, then Program_Error is propagated. Otherwise, Query_Element calls Process.all with the element designated by Position as the argument. Tampering with the elements of the tree that contains the element designated by Position is prohibited during the execution of the call on Process.all. Any exception raised by Process.all is propagated. procedure Update_Element (Container : in out Tree; Position : in Cursor; Process : not null access procedure (Element : in out Element_Type)); 101/3 102/3 103/3 104/3 105/3 106/3 107/3 108/3 109/3 110/3 111/3 112/3 113/3 114/3 115/3 116/3 117/3 118/3 119/3 If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element in Container (including if it designates the root node), then Program_Error is propagated. Otherwise, Update_Element calls Process.all with the element designated by 120/3 543 13 December 2012 The Generic Package Containers.Multiway_Trees A.18.10 121/3 122/3 123/3 124/3 125/3 126/3 127/3 128/3 129/3 130/3 131/3 132/3 133/3 134/3 135/3 136/3 137/3 Ada Reference Manual — 2012 Edition Position as the argument. Tampering with the elements of Container is prohibited during the execution of the call on Process.all. Any exception raised by Process.all is propagated. If Element_Type is unconstrained and definite, then the actual Element parameter of Process.all shall be unconstrained. type Constant_Reference_Type (Element : not null access constant Element_Type) is private with Implicit_Dereference => Element; type Reference_Type (Element : not null access Element_Type) is private with Implicit_Dereference => Element; The types Constant_Reference_Type and Reference_Type need finalization. The default initialization of an object of type Constant_Reference_Type or Reference_Type propagates Program_Error. function Constant_Reference (Container : aliased in Tree; Position : in Cursor) return Constant_Reference_Type; This function (combined with the Constant_Indexing and Implicit_Dereference aspects) provides a convenient way to gain read access to an individual element of a tree given a cursor. If Position equals No_Element, then Constraint_Error is propagated; if Position does not is propagated. Otherwise, designate an element Constant_Reference returns an object whose discriminant is an access value that designates the element designated by Position. Tampering with the elements of Container is prohibited while the object returned by Constant_Reference exists and has not been finalized. then Program_Error in Container, function Reference (Container : aliased in out Tree; Position : in Cursor) return Reference_Type; This function (combined with the Variable_Indexing and Implicit_Dereference aspects) provides a convenient way to gain read and write access to an individual element of a tree given a cursor. If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element in Container, then Program_Error is propagated. Otherwise, Reference returns an object whose discriminant is an access value that designates the element designated by Position. Tampering with the elements of Container is prohibited while the object returned by Reference exists and has not been finalized. procedure Assign (Target : in out Tree; Source : in Tree); If Target denotes the same object as Source, the operation has no effect. Otherwise, the elements of Source are copied to Target as for an assignment_statement assigning Source to Target. function Copy (Source : Tree) return Tree; Returns a tree with the same structure as Source and whose elements are initialized from the corresponding elements of Source. procedure Move (Target : in out Tree; Source : in out Tree); If Target denotes the same object as Source, then the operation has no effect. Otherwise, Move first calls Clear (Target). Then, the nodes other than the root node in Source are moved to Target A.18.10 The Generic Package Containers.Multiway_Trees 13 December 2012 544 Ada Reference Manual — 2012 Edition (in the same positions). After Move completes, Node_Count (Target) is the number of nodes originally in Source, and Node_Count (Source) is 1. procedure Delete_Leaf (Container : in out Tree; Position : in out Cursor); If Position equals No_Element, then Constraint_Error is propagated; if Position does not designate an element in Container (including if it designates the root node), then Program_Error then is propagated. If Constraint_Error is propagated. Otherwise, Delete_Leaf removes (from Container) the element designated by Position. Finally, Position is set to No_Element. the element designated by position has any child elements, procedure Delete_Subtree (Container : in out Tree; Position : in out Cursor); If Position equals No_Element, then Constraint_Error is propagated. If Position does not designate an element in Container (including if it designates the root node), then Program_Error is propagated. Otherwise, Delete_Subtree removes (from Container) the subtree designated by Position (that is, all descendants of the node designated by Position including the node itself), and Position is set to No_Element. procedure Swap (Container : in out Tree; I, J : in Cursor); If either I or J equals No_Element, then Constraint_Error is propagated. If either I or J do not designate an element in Container (including if either designates the root node), then Program_Error is propagated. Otherwise, Swap exchanges the values of the elements designated by I and J. function Find (Container : Tree; Item : Element_Type) return Cursor; Find searches the elements of Container for an element equal to Item (using the generic formal equality operator). The search starts at the root node. The search traverses the tree in a depth- first order. If no equal element is found, then Find returns No_Element. Otherwise, it returns a cursor designating the first equal element encountered. function Find_In_Subtree (Position : Cursor; Item : Element_Type) return Cursor; If Position equals No_Element, then Constraint_Error is propagated. Find_In_Subtree searches the subtree rooted by Position for an element equal to Item (using the generic formal equality operator). The search starts at the element designated by Position. The search traverses the subtree in a depth-first order. If no equal element is found, then Find returns No_Element. Otherwise, it returns a cursor designating the first equal element encountered. function Ancestor_Find (Position : Cursor; Item : Element_Type) return Cursor; If Position equals No_Element, then Constraint_Error is propagated. Otherwise, Ancestor_Find searches for an element equal to Item (using the generic formal equality operator). The search starts at the node designated by Position, and checks each ancestor proceeding toward the root of the subtree. If no equal element is found, then Ancestor_Find returns No_Element. Otherwise, it returns a cursor designating the first equal element encountered. 138/3 139/3 140/3 141/3 142/3 143/3 144/3 145/3 146/3 147/3 148/3 149/3 545 13 December 2012 The Generic Package Containers.Multiway_Trees A.18.10 150/3 151/3 152/3 153/3 154/3 155/3 156/3 157/3 158/3 159/3 160/3 161/3 162/3 163/3 Ada Reference Manual — 2012 Edition function Contains (Container : Tree; Item : Element_Type) return Boolean; Equivalent to Find (Container, Item) /= No_Element. procedure Iterate (Container : in Tree; Process : not null access procedure (Position : in Cursor)); Iterate calls Process.all with a cursor that designates each element in Container, starting with the root node and proceeding in a depth-first order. Tampering with the cursors of Container is prohibited during the execution of a call on Process.all. Any exception raised by Process.all is propagated. procedure Iterate_Subtree (Position : in Cursor; Process : not null access procedure (Position : in Cursor)); If Position equals No_Element, then Constraint_Error is propagated. Otherwise, Iterate_Subtree calls Process.all with a cursor that designates each element in the subtree rooted by the node designated by Position, starting with the node designated by Position and proceeding in a depth- first order. Tampering with the cursors of the tree that contains the element designated by Position is prohibited during the execution of a call on Process.all. Any exception raised by Process.all is propagated. function Iterate (Container : in Tree) return Tree_Iterator_Interfaces.Forward_Iterator'Class; Iterate returns an iterator object (see 5.5.1) that will generate a value for a loop parameter (see 5.5.2) designating each node in Container, starting with the root node and proceeding in a depth- first order. Tampering with the cursors of Container is prohibited while the iterator object exists loop_statement whose (in iterator_specification denotes this object). The iterator object needs finalization. sequence_of_statements particular, the the of in function Iterate_Subtree (Position : in Cursor) return Tree_Iterator_Interfaces.Forward_Iterator'Class; If Position equals No_Element, then Constraint_Error is propagated. Otherwise, Iterate_Subtree returns an iterator object (see 5.5.1) that will generate a value for a loop parameter (see 5.5.2) designating each element in the subtree rooted by the node designated by Position, starting with the node designated by Position and proceeding in a depth-first order. If Position equals No_Element, then Constraint_Error is propagated. Tampering with the cursors of the container that contains the node designated by Position is prohibited while the iterator object exists (in particular, in the sequence_of_statements of the loop_statement whose iterator_specification denotes this object). The iterator object needs finalization. function Child_Count (Parent : Cursor) return Count_Type; Child_Count returns the number of child nodes of the node designated by Parent. function Child_Depth (Parent, Child : Cursor) return Count_Type; If Child or Parent is equal to No_Element, then Constraint_Error is propagated. Otherwise, Child_Depth returns the number of ancestor nodes of Child (including Child itself), up to but not including Parent; Program_Error is propagated if Parent is not an ancestor of Child. A.18.10 The Generic Package Containers.Multiway_Trees 13 December 2012 546 Ada Reference Manual — 2012 Edition procedure Insert_Child (Container : in out Tree; Parent : in Cursor; Before : in Cursor; New_Item : in Element_Type; Count : in Count_Type := 1); If Parent equals No_Element, then Constraint_Error is propagated. If Parent does not designate a node in Container, then Program_Error is propagated. If Before is not equal to No_Element, and does not designate a node in Container, then Program_Error is propagated. If Before is not equal to No_Element, and Parent does not designate the parent node of the node designated by Before, then Constraint_Error is propagated. Otherwise, Insert_Child allocates Count nodes containing copies of New_Item and inserts them as children of Parent. If Parent already has child nodes, then the new nodes are inserted prior to the node designated by Before, or, if Before equals No_Element, the new nodes are inserted after the last existing child node of Parent. Any exception raised during allocation of internal storage is propagated, and Container is not modified. procedure Insert_Child (Container : in out Tree; Parent : in Cursor; Before : in Cursor; New_Item : in Element_Type; Position : out Cursor; Count : in Count_Type := 1); If Parent equals No_Element, then Constraint_Error is propagated. If Parent does not designate a node in Container, then Program_Error is propagated. If Before is not equal to No_Element, and does not designate a node in Container, then Program_Error is propagated. If Before is not equal to No_Element, and Parent does not designate the parent node of the node designated by Before, then Constraint_Error is propagated. Otherwise, Insert_Child allocates Count nodes containing copies of New_Item and inserts them as children of Parent. If Parent already has child nodes, then the new nodes are inserted prior to the node designated by Before, or, if Before equals No_Element, the new nodes are inserted after the last existing child node of Parent. Position designates the first newly-inserted node, or if Count equals 0, then Position is assigned the value of Before. Any exception raised during allocation of internal storage is propagated, and Container is not modified. procedure Insert_Child (Container : in out Tree; Parent : in Cursor; Before : in Cursor; Position : out Cursor; Count : in Count_Type := 1); If Parent equals No_Element, then Constraint_Error is propagated. If Parent does not designate a node in Container, then Program_Error is propagated. If Before is not equal to No_Element, and does not designate a node in Container, then Program_Error is propagated. If Before is not equal to No_Element, and Parent does not designate the parent node of the node designated by Before, then Constraint_Error is propagated. Otherwise, Insert_Child allocates Count nodes, the elements contained in the new nodes are initialized by default (see 3.3.1), and the new nodes are inserted as children of Parent. If Parent already has child nodes, then the new nodes are inserted prior to the node designated by Before, or, if Before equals No_Element, the new nodes are inserted after the last existing child node of Parent. Position designates the first newly-inserted node, or if Count equals 0, then Position is assigned the value of Before. Any exception raised during allocation of internal storage is propagated, and Container is not modified. 164/3 165/3 166/3 167/3 168/3 169/3 547 13 December 2012 The Generic Package Containers.Multiway_Trees A.18.10 Ada Reference Manual — 2012 Edition 170/3 171/3 172/3 173/3 174/3 175/3 176/3 177/3 178/3 179/3 procedure Prepend_Child (Container : in out Tree; Parent : in Cursor; New_Item : in Element_Type; Count : in Count_Type := 1); Equivalent to Insert_Child (Container, Parent, First_Child (Container, Parent), New_Item, Count). procedure Append_Child (Container : in out Tree; Parent : in Cursor; New_Item : in Element_Type; Count : in Count_Type := 1); Equivalent to Insert_Child (Container, Parent, No_Element, New_Item, Count). procedure Delete_Children (Container : in out Tree; Parent : in Cursor); If Parent equals No_Element, then Constraint_Error is propagated. If Parent does not designate a node in Container, Program_Error is propagated. Otherwise, Delete_Children removes (from Container) all of the descendants of Parent other than Parent itself. procedure Copy_Subtree (Target : in out Tree; Parent : in Cursor; Before : in Cursor; Source : in Cursor); If Parent equals No_Element, then Constraint_Error is propagated. If Parent does not designate a node in Target, then Program_Error is propagated. If Before is not equal to No_Element, and does not designate a node in Target, then Program_Error is propagated. If Before is not equal to No_Element, and Parent does not designate the parent node of the node designated by Before, then Constraint_Error is propagated. If Source designates a root node, then Constraint_Error is propagated. If Source is equal to No_Element, then the operation has no effect. Otherwise, the subtree rooted by Source (which can be from any tree; it does not have to be a subtree of Target) is copied (new nodes are allocated to create a new subtree with the same structure as the Source subtree, with each element initialized from the corresponding element of the Source subtree) and inserted into Target as a child of Parent. If Parent already has child nodes, then the new nodes are inserted prior to the node designated by Before, or, if Before equals No_Element, the new nodes are inserted after the last existing child node of Parent. The parent of the newly created subtree is set to Parent, and the overall count of Target is incremented by Subtree_Node_Count (Source). Any exception raised during allocation of internal storage is propagated, and Container is not modified. procedure Splice_Subtree (Target : in out Tree; Parent : in Cursor; Before : in Cursor; Source : in out Tree; Position : in out Cursor); If Parent equals No_Element, then Constraint_Error is propagated. If Parent does not designate a node in Target, then Program_Error is propagated. If Before is not equal to No_Element, and does not designate a node in Target, then Program_Error is propagated. If Before is not equal to No_Element, and Parent does not designate the parent node of the node designated by Before, then Constraint_Error is propagated. If Position equals No_Element, Constraint_Error is propagated. If Position does not designate a node in Source or designates a root node, then Program_Error is propagated. If Source denotes the same object as Target, then: if Position equals Before there is no effect; if Position designates an ancestor of Parent (including Parent itself), Constraint_Error is propagated; otherwise, the subtree rooted by the element designated A.18.10 The Generic Package Containers.Multiway_Trees 13 December 2012 548 Ada Reference Manual — 2012 Edition by Position is moved to be a child of Parent. If Parent already has child nodes, then the moved nodes are inserted prior to the node designated by Before, or, if Before equals No_Element, the moved nodes are inserted after the last existing child node of Parent. In each of these cases, Position and the count of Target are unchanged, and the parent of the element designated by Position is set to Parent. Otherwise (if Source does not denote the same object as Target), the subtree designated by Position is removed from Source and moved to Target. The subtree is inserted as a child of Parent. If Parent already has child nodes, then the moved nodes are inserted prior to the node designated by Before, or, if Before equals No_Element, the moved nodes are inserted after the last existing child node of Parent. In each of these cases, the count of Target is incremented by Subtree_Node_Count is decremented by Subtree_Node_Count (Position), Position is updated to represent an element in Target. count of Source (Position), and the procedure Splice_Subtree (Container: in out Tree; Parent : in Cursor; Before : in Cursor; Position : in Cursor); If Parent equals No_Element, then Constraint_Error is propagated. If Parent does not designate a node in Container, then Program_Error is propagated. If Before is not equal to No_Element, and does not designate a node in Container, then Program_Error is propagated. If Before is not equal to No_Element, and Parent does not designate the parent node of the node designated by Before, then Constraint_Error is propagated. If Position equals No_Element, Constraint_Error is propagated. If Position does not designate a node in Container or designates a root node, then Program_Error is propagated. If Position equals Before, there is no effect. If Position designates an ancestor of Parent (including Parent itself), Constraint_Error is propagated. Otherwise, the subtree rooted by the element designated by Position is moved to be a child of Parent. If Parent already has child nodes, then the moved nodes are inserted prior to the node designated by Before, or, if Before equals No_Element, the moved nodes are inserted after the last existing child node of Parent. The parent of the element designated by Position is set to Parent. procedure Splice_Children (Target : in out Tree; Target_Parent : in Cursor; Before : in Cursor; Source : in out Tree; Source_Parent : in Cursor); If Target_Parent equals No_Element, then Constraint_Error is propagated. If Target_Parent does not designate a node in Target, then Program_Error is propagated. If Before is not equal to No_Element, and does not designate an element in Target, then Program_Error is propagated. If Source_Parent equals No_Element, then Constraint_Error is propagated. If Source_Parent does not designate a node in Source, then Program_Error is propagated. If Before is not equal to No_Element, and Target_Parent does not designate the parent node of the node designated by Before, then Constraint_Error is propagated. If Source denotes the same object as Target, then: • • • if Target_Parent equals Source_Parent there is no effect; else if Source_Parent is an ancestor of Target_Parent other than Target_Parent itself, then Constraint_Error is propagated; else the child elements (and the further descendants) of Source_Parent are moved to be child elements of Target_Parent. If Target_Parent already has child elements, then the moved elements are inserted prior to the node designated by Before, or, if Before 549 13 December 2012 The Generic Package Containers.Multiway_Trees A.18.10 180/3 181/3 182/3 183/3 184/3 185/3 186/3 187/3 188/3 Ada Reference Manual — 2012 Edition equals No_Element, the moved elements are inserted after the last existing child node of Target_Parent. The parent of each moved child element is set to Target_Parent. Otherwise (if Source does not denote the same object as Target), the child elements (and the further descendants) of Source_Parent are removed from Source and moved to Target. The child elements are inserted as children of Target_Parent. If Target_Parent already has child elements, then the moved elements are inserted prior to the node designated by Before, or, if Before equals No_Element, the moved elements are inserted after the last existing child node of Target_Parent. In each of these cases, the overall count of Target is incremented by Subtree_Node_Count (Source_Parent)-1, and the overall count of Source is decremented by Subtree_Node_Count (Source_Parent)-1. procedure Splice_Children (Container : in out Tree; Target_Parent : in Cursor; Before : in Cursor; Source_Parent : in Cursor); If Target_Parent equals No_Element, then Constraint_Error is propagated. If Target_Parent does not designate a node in Container, then Program_Error is propagated. If Before is not equal to No_Element, and does not designate an element in Container, then Program_Error is propagated. If Source_Parent equals No_Element, then Constraint_Error is propagated. If Source_Parent does not designate a node in Container, then Program_Error is propagated. If Before is not equal to No_Element, and Target_Parent does not designate the parent node of the node designated by Before, then Constraint_Error is propagated. If Target_Parent equals Source_Parent there is no effect. If Source_Parent is an ancestor of Target_Parent other than Target_Parent itself, then Constraint_Error is propagated. Otherwise, the child elements (and the further descendants) of Source_Parent are moved to be child elements of Target_Parent. If Target_Parent already has child elements, then the moved elements are inserted prior to the node designated by Before, or, if Before equals No_Element, the moved elements are inserted after the last existing child node of Target_Parent. The parent of each moved child element is set to Target_Parent. function Parent (Position : Cursor) return Cursor; If Position is equal to No_Element or designates a root node, No_Element is returned. Otherwise, a cursor designating the parent node of the node designated by Position is returned. function First_Child (Parent : Cursor) return Cursor; If Parent is equal to No_Element, then Constraint_Error is propagated. Otherwise, First_Child returns a cursor designating the first child node of the node designated by Parent; if there is no such node, No_Element is returned. function First_Child_Element (Parent : Cursor) return Element_Type; Equivalent to Element (First_Child (Parent)). function Last_Child (Parent : Cursor) return Cursor; If Parent is equal to No_Element, then Constraint_Error is propagated. Otherwise, Last_Child returns a cursor designating the last child node of the node designated by Parent; if there is no such node, No_Element is returned. function Last_Child_Element (Parent : Cursor) return Element_Type; Equivalent to Element (Last_Child (Parent)). 189/3 190/3 191/3 192/3 193/3 194/3 195/3 196/3 197/3 198/3 199/3 200/3 201/3 A.18.10 The Generic Package Containers.Multiway_Trees 13 December 2012 550 Ada Reference Manual — 2012 Edition function Next_Sibling (Position : Cursor) return Cursor; If Position equals No_Element or designates the last child node of its parent, then Next_Sibling returns the value No_Element. Otherwise, it returns a cursor that designates the successor (with the same parent) of the node designated by Position. function Previous_Sibling (Position : Cursor) return Cursor; If Position equals No_Element or designates the first child node of its parent, then Previous_Sibling returns the value No_Element. Otherwise, it returns a cursor that designates the predecessor (with the same parent) of the node designated by Position. procedure Next_Sibling (Position : in out Cursor); Equivalent to Position := Next_Sibling (Position); procedure Previous_Sibling (Position : in out Cursor); Equivalent to Position := Previous_Sibling (Position); procedure Iterate_Children (Parent : in Cursor; Process : not null access procedure (Position : in Cursor)); If Parent equals No_Element, then Constraint_Error is propagated. Iterate_Children calls Process.all with a cursor that designates each child node of Parent, starting with the first child node and moving the cursor as per the Next_Sibling function. Tampering with the cursors of the tree containing Parent is prohibited during the execution of a call on Process.all. Any exception raised by Process.all is propagated. procedure Reverse_Iterate_Children (Parent : in Cursor; Process : not null access procedure (Position : in Cursor)); If Parent equals No_Element, then Constraint_Error is propagated. Reverse_Iterate_Children calls Process.all with a cursor that designates each child node of Parent, starting with the last child node and moving the cursor as per the Previous_Sibling function. Tampering with the cursors of the tree containing Parent is prohibited during the execution of a call on Process.all. Any exception raised by Process.all is propagated. function Iterate_Children (Container : in Tree; Parent : in Cursor) return Tree_Iterator_Interfaces.Reversible_Iterator'Class; Iterate_Children returns a reversible iterator object (see 5.5.1) that will generate a value for a loop parameter (see 5.5.2) designating each child node of Parent. If Parent equals No_Element, then Constraint_Error is propagated. If Parent does not designate a node in Container, then Program_Error is propagated. Otherwise, when used as a forward iterator, the nodes are designated starting with the first child node and moving the cursor as per the function Next_Sibling; when used as a reverse iterator, the nodes are designated starting with the last child node and moving the cursor as per the function Previous_Sibling. Tampering with the cursors of Container is prohibited while the iterator object exists (in particular, in the sequence_of_statements of the loop_statement whose iterator_specification denotes this object). The iterator object needs finalization. 202/3 203/3 204/3 205/3 206/3 207/3 208/3 209/3 210/3 211/3 212/3 213/3 214/3 215/3 216/3 217/3 218/3 219/3 551 13 December 2012 The Generic Package Containers.Multiway_Trees A.18.10 Ada Reference Manual — 2012 Edition Bounded (Run-Time) Errors 220/3 221/3 It is a bounded error for the actual function associated with a generic formal subprogram, when called as part of an operation of this package, to tamper with elements of any Tree parameter of the operation. Either Program_Error is raised, or the operation works as defined on the value of the Tree either prior to, or subsequent to, some or all of the modifications to the Tree. It is a bounded error to call any subprogram declared in the visible part of Containers.Multiway_Trees when the associated container has been finalized. If the operation takes Container as an in out parameter, then it raises Constraint_Error or Program_Error. Otherwise, the operation either proceeds as it would for an empty container, or it raises Constraint_Error or Program_Error. Erroneous Execution 222/3 A Cursor value is invalid if any of the following have occurred since it was created: 223/3 224/3 • The tree that contains the element it designates has been finalized; • The tree that contains the element it designates has been used as the Source or Target of a call to Move; 225/3 • The tree that contains the element it designates has been used as the Target of a call to Assign or the target of an assignment_statement; 226/3 227/3 • The element it designates has been removed from the tree that previously contained the element. The result of "=" or Has_Element is unspecified if it is called with an invalid cursor parameter. Execution is erroneous if any other subprogram declared in Containers.Multiway_Trees is called with an invalid cursor parameter. 228/3 Execution is erroneous if the tree associated with the result of a call to Reference or Constant_Reference is finalized before the result object returned by the call to Reference or Constant_Reference is finalized. Implementation Requirements 229/3 No storage associated with a multiway tree object shall be lost upon assignment or scope exit. 230/3 The execution of an assignment_statement for a tree shall have the effect of copying the elements from the source tree object to the target tree object and changing the node count of the target object to that of the source object. Implementation Advice 231/3 Containers.Multiway_Trees should be implemented similarly to a multiway tree. In particular, if N is the overall number of nodes for a particular tree, then the worst-case time complexity of Element, Parent, First_Child, Last_Child, Next_Sibling, Previous_Sibling, Insert_Child with Count=1, and Delete should be O(log N). 232/3 Move should not copy elements, and should minimize copying of internal data structures. 233/3 If an exception is propagated from a tree operation, no storage should be lost, nor any elements removed from a tree unless specified by the operation. A.18.11 The Generic Package Containers.Indefinite_Vectors 1/2 The language-defined generic package Containers.Indefinite_Vectors provides a private type Vector and a set of operations. It provides the same operations as the package Containers.Vectors (see A.18.2), with the difference that the generic formal Element_Type is indefinite. A.18.10 The Generic Package Containers.Multiway_Trees 13 December 2012 552 The declaration of the generic library package Containers.Indefinite_Vectors has the same contents and semantics as Containers.Vectors except: Static Semantics Ada Reference Manual — 2012 Edition • The generic formal Element_Type is indefinite. • The procedures with the profiles: procedure Insert (Container : in out Vector; Before : in Extended_Index; Count : in Count_Type := 1); procedure Insert (Container : in out Vector; Before : in Cursor; Position : out Cursor; Count : in Count_Type := 1); are omitted. • The actual Element parameter of access subprogram Process of Update_Element may be constrained even if Element_Type is unconstrained. A.18.12 The Generic Package Containers.Indefinite_Doubly_Linked_Lists The language-defined generic package Containers.Indefinite_Doubly_Linked_Lists provides private types List and Cursor, and a set of operations for each type. It provides the same operations as the package Containers.Doubly_Linked_Lists (see A.18.3), with the difference that the generic formal Element_Type is indefinite. The declaration of the generic library package Containers.Indefinite_Doubly_Linked_Lists has the same contents and semantics as Containers.Doubly_Linked_Lists except: Static Semantics • The generic formal Element_Type is indefinite. • The procedure with the profile: procedure Insert (Container : in out List; Before : in Cursor; Position : out Cursor; Count : in Count_Type := 1); is omitted. • The actual Element parameter of access subprogram Process of Update_Element may be constrained even if Element_Type is unconstrained. A.18.13 The Generic Package Containers.Indefinite_Hashed_Maps The language-defined generic package Containers.Indefinite_Hashed_Maps provides a map with the same operations as the package Containers.Hashed_Maps (see A.18.5), with the difference that the generic formal types Key_Type and Element_Type are indefinite. Static Semantics The declaration of the generic library package Containers.Indefinite_Hashed_Maps has the same contents and semantics as Containers.Hashed_Maps except: • The generic formal Key_Type is indefinite. • The generic formal Element_Type is indefinite. 553 13 December 2012 The Generic Package Containers.Indefinite_Vectors A.18.11 2/3 3/2 4/2 5/2 6/2 7/2 8/2 1/2 2/3 3/2 4/2 5/2 6/2 7/2 1/2 2/3 3/2 4/2 5/2 6/2 7/2 8/2 1/2 2/3 3/2 4/2 5/2 6/2 7/2 8/2 1/2 2/3 3/2 4/2 1/2 Ada Reference Manual — 2012 Edition • The procedure with the profile: procedure Insert (Container : in out Map; Key : in Key_Type; Position : out Cursor; Inserted : out Boolean); is omitted. • The actual Element parameter of access subprogram Process of Update_Element may be constrained even if Element_Type is unconstrained. A.18.14 The Generic Package Containers.Indefinite_Ordered_Maps The language-defined generic package Containers.Indefinite_Ordered_Maps provides a map with the same operations as the package Containers.Ordered_Maps (see A.18.6), with the difference that the generic formal types Key_Type and Element_Type are indefinite. Static Semantics The declaration of the generic library package Containers.Indefinite_Ordered_Maps has the same contents and semantics as Containers.Ordered_Maps except: • The generic formal Key_Type is indefinite. • The generic formal Element_Type is indefinite. • The procedure with the profile: procedure Insert (Container : in out Map; Key : in Key_Type; Position : out Cursor; Inserted : out Boolean); is omitted. • The actual Element parameter of access subprogram Process of Update_Element may be constrained even if Element_Type is unconstrained. A.18.15 The Generic Package Containers.Indefinite_Hashed_Sets The language-defined generic package Containers.Indefinite_Hashed_Sets provides a set with the same operations as the package Containers.Hashed_Sets (see A.18.8), with the difference that the generic formal type Element_Type is indefinite. Static Semantics The declaration of the generic library package Containers.Indefinite_Hashed_Sets has the same contents and semantics as Containers.Hashed_Sets except: • The generic formal Element_Type is indefinite. • The actual Element parameter of access subprogram Process of Update_Element_- Preserving_Key may be constrained even if Element_Type is unconstrained. A.18.16 The Generic Package Containers.Indefinite_Ordered_Sets The language-defined generic package Containers.Indefinite_Ordered_Sets provides a set with the same operations as the package Containers.Ordered_Sets (see A.18.9), with the difference that the generic formal type Element_Type is indefinite. A.18.13 The Generic Package Containers.Indefinite_Hashed_Maps 13 December 2012 554 Ada Reference Manual — 2012 Edition Static Semantics The declaration of the generic library package Containers.Indefinite_Ordered_Sets has the same contents and semantics as Containers.Ordered_Sets except: • The generic formal Element_Type is indefinite. • The actual Element parameter of access subprogram Process of Update_Element_- Preserving_Key may be constrained even if Element_Type is unconstrained. A.18.17 The Generic Package Containers.Indefinite_Multiway_Trees The language-defined generic package Containers.Indefinite_Multiway_Trees provides a multiway tree with the same operations as the package Containers.Multiway_Trees (see A.18.10), with the difference that the generic formal Element_Type is indefinite. The declaration of the generic library package Containers.Indefinite_Multiway_Trees has the same contents and semantics as Containers.Multiway_Trees except: Static Semantics • The generic formal Element_Type is indefinite. • The procedure with the profile: procedure Insert_Child (Container : in out Tree; Parent : in Cursor; Before : in Cursor; Position : out Cursor; Count : in Count_Type := 1); is omitted. • The actual Element parameter of access subprogram Process of Update_Element may be constrained even if Element_Type is unconstrained. A.18.18 The Generic Package Containers.Indefinite_Holders The language-defined generic package Containers.Indefinite_Holders provides a private type Holder and a set of operations for that type. A holder container holds a single element of an indefinite type. A holder container allows the declaration of an object that can be used like an uninitialized variable or component of an indefinite type. A holder container may be empty. An empty holder does not contain an element. The generic library package Containers.Indefinite_Holders has the following declaration: Static Semantics generic type Element_Type (<>) is private; with function "=" (Left, Right : Element_Type) return Boolean is <>; package Ada.Containers.Indefinite_Holders is pragma Preelaborate(Indefinite_Holders); pragma Remote_Types(Indefinite_Holders); type Holder is tagged private; pragma Preelaborable_Initialization (Holder); Empty_Holder : constant Holder; function "=" (Left, Right : Holder) return Boolean; function To_Holder (New_Item : Element_Type) return Holder; 2/3 3/2 4/2 1/3 2/3 3/3 4/3 5/3 6/3 7/3 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 555 13 December 2012 The Generic Package Containers.Indefinite_Ordered_Sets A.18.16 Ada Reference Manual — 2012 Edition 10/3 11/3 12/3 13/3 14/3 15/3 16/3 17/3 18/3 19/3 20/3 21/3 22/3 23/3 24/3 25/3 26/3 function Is_Empty (Container : Holder) return Boolean; procedure Clear (Container : in out Holder); function Element (Container : Holder) return Element_Type; procedure Replace_Element (Container : in out Holder; New_Item : in Element_Type); procedure Query_Element (Container : in Holder; Process : not null access procedure (Element : in Element_Type)); procedure Update_Element (Container : in out Holder; Process : not null access procedure (Element : in out Element_Type)); type Constant_Reference_Type (Element : not null access constant Element_Type) is private with Implicit_Dereference => Element; type Reference_Type (Element : not null access Element_Type) is private with Implicit_Dereference => Element; function Constant_Reference (Container : aliased in Holder) return Constant_Reference_Type; function Reference (Container : aliased in out Holder) return Reference_Type; procedure Assign (Target : in out Holder; Source : in Holder); function Copy (Source : Holder) return Holder; procedure Move (Target : in out Holder; Source : in out Holder); private ... -- not specified by the language end Ada.Containers.Indefinite_Holders; The actual function for the generic formal function "=" on Element_Type values is expected to define a reflexive and symmetric relationship and return the same result value each time it is called with a particular pair of values. If it behaves in some other manner, the function "=" on holder values returns an unspecified value. The exact arguments and number of calls of this generic formal function by the function "=" on holder values are unspecified. 27/3 The type Holder is used to represent holder containers. The type Holder needs finalization (see 7.6). 28/3 29/3 30/3 31/3 32/3 33/3 34/3 Empty_Holder represents an empty holder object. If an object of type Holder is not otherwise initialized, it is initialized to the same value as Empty_Holder. Some operations of this generic package have access-to-subprogram parameters. To ensure such operations are well-defined, they guard against certain actions by the designated subprogram. In particular, some operations check for “tampering with the element” of a container because they depend on the element of the container not being replaced. A subprogram is said to tamper with the element of a holder object H if: • It clears the element contained by H, that is, it calls the Clear procedure with H as a parameter; • It replaces the element contained by H, that is, it calls the Replace_Element procedure with H as a parameter; • It calls the Move procedure with H as a parameter; • It finalizes H. A.18.18 The Generic Package Containers.Indefinite_Holders 13 December 2012 556 Ada Reference Manual — 2012 Edition When tampering with the element is prohibited for a particular holder object H, Program_Error is propagated by a call of any language-defined subprogram that is defined to tamper with the element of H, leaving H unmodified. function "=" (Left, Right : Holder) return Boolean; If Left and Right denote the same holder object, then the function returns True. Otherwise, it compares the element contained in Left to the element contained in Right using the generic formal equality operator, returning the result of that operation. Any exception raised during the evaluation of element equality is propagated. function To_Holder (New_Item : Element_Type) return Holder; Returns a nonempty holder containing an element initialized to New_Item. function Is_Empty (Container : Holder) return Boolean; Returns True if Container is empty, and False if it contains an element. procedure Clear (Container : in out Holder); Removes the element from Container. Container is empty after a successful Clear operation. function Element (Container : Holder) return Element_Type; If Container is empty, Constraint_Error is propagated. Otherwise, returns the element stored in Container. procedure Replace_Element (Container : in out Holder; New_Item : in Element_Type); Replace_Element assigns the value New_Item into Container, replacing any preexisting content of Container. Container is not empty after a successful call to Replace_Element. procedure Query_Element (Container : in Holder; Process : not null access procedure (Element : in Element_Type)); If Container is empty, Constraint_Error is propagated. Otherwise, Query_Element calls Process.all with the contained element as the argument. Tampering with the element of Container is prohibited during the execution of the call on Process.all. Any exception raised by Process.all is propagated. procedure Update_Element (Container : in out Holder; Process : not null access procedure (Element : in out Element_Type)); If Container is empty, Constraint_Error is propagated. Otherwise, Update_Element calls Process.all with the contained element as the argument. Tampering with the element of Container is prohibited during the execution of the call on Process.all. Any exception raised by Process.all is propagated. type Constant_Reference_Type (Element : not null access constant Element_Type) is private with Implicit_Dereference => Element; type Reference_Type (Element : not null access Element_Type) is private with Implicit_Dereference => Element; The types Constant_Reference_Type and Reference_Type need finalization. 35/3 36/3 37/3 38/3 39/3 40/3 41/3 42/3 43/3 44/3 45/3 46/3 47/3 48/3 49/3 50/3 51/3 52/3 53/3 54/3 557 13 December 2012 The Generic Package Containers.Indefinite_Holders A.18.18 Ada Reference Manual — 2012 Edition 55/3 56/3 57/3 58/3 59/3 60/3 61/3 62/3 63/3 64/3 65/3 66/3 67/3 68/3 69/3 The default initialization of an object of type Constant_Reference_Type or Reference_Type propagates Program_Error. function Constant_Reference (Container : aliased in Holder) return Constant_Reference_Type; This function (combined with the Implicit_Dereference aspect) provides a convenient way to gain read access to the contained element of a holder container. If Container is empty, Constraint_Error is propagated. Otherwise, Constant_Reference returns an object whose discriminant is an access value that designates the contained element. Tampering with the elements of Container is prohibited while the object returned by Constant_Reference exists and has not been finalized. function Reference (Container : aliased in out Holder) return Reference_Type; This function (combined with the Implicit_Dereference aspects) provides a convenient way to gain read and write access to the contained element of a holder container. If Container is empty, Constraint_Error is propagated. Otherwise, Reference returns an object whose discriminant is an access value that designates the contained element. Tampering with the elements of Container is prohibited while the object returned by Reference exists and has not been finalized. procedure Assign (Target : in out Holder; Source : in Holder); If Target denotes the same object as Source, the operation has no effect. If Source is empty, Clear (Target) is called. Otherwise, Replace_Element (Target, Element (Source)) is called. function Copy (Source : Holder) return Holder; If Source is empty, returns an empty holder container; otherwise, returns To_Holder (Element (Source)). procedure Move (Target : in out Holder; Source : in out Holder); If Target denotes the same object as Source, then the operation has no effect. Otherwise, the element contained by Source (if any) is removed from Source and inserted into Target, replacing any preexisting content. Source is empty after a successful call to Move. Bounded (Run-Time) Errors It is a bounded error for the actual function associated with a generic formal subprogram, when called as part of an operation of this package, to tamper with the element of any Holder parameter of the operation. Either Program_Error is raised, or the operation works as defined on the value of the Holder either prior to, or subsequent to, some or all of the modifications to the Holder. It is a bounded error to call any subprogram declared in the visible part of Containers.Indefinite_Holders when the associated container has been finalized. If the operation takes Container as an in out parameter, then it raises Constraint_Error or Program_Error. Otherwise, the operation either proceeds as it would for an empty container, or it raises Constraint_Error or Program_Error. 70/3 Execution is erroneous if the holder container associated with the result of a call to Reference or Constant_Reference is finalized before the result object returned by the call to Reference or Constant_Reference is finalized. Erroneous Execution A.18.18 The Generic Package Containers.Indefinite_Holders 13 December 2012 558 Ada Reference Manual — 2012 Edition No storage associated with a holder object shall be lost upon assignment or scope exit. Implementation Requirements The execution of an assignment_statement for a holder container shall have the effect of copying the element (if any) from the source holder object to the target holder object. Move should not copy the element, and should minimize copying of internal data structures. Implementation Advice If an exception is propagated from a holder operation, no storage should be lost, nor should the element be removed from a holder container unless specified by the operation. A.18.19 The Generic Package Containers.Bounded_Vectors The language-defined generic package Containers.Bounded_Vectors provides a private type Vector and a set of operations. It provides the same operations as the package Containers.Vectors (see A.18.2), with the difference that the maximum storage is bounded. The declaration of the generic library package Containers.Bounded_Vectors has the same contents and semantics as Containers.Vectors except: Static Semantics • The pragma Preelaborate is replaced with pragma Pure. • The type Vector is declared with a discriminant that specifies the capacity: type Vector (Capacity : Count_Type) is tagged private; • The type Vector needs finalization if and only if type Element_Type needs finalization. • In function Copy, if the Capacity parameter is equal to or greater than the length of Source, the vector capacity exactly equals the value of the Capacity parameter. • The description of Reserve_Capacity is replaced with: If the specified Capacity is larger than the capacity of Container, then Reserve_Capacity propagates Capacity_Error. Otherwise, the operation has no effect. 71/3 72/3 73/3 74/3 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 It is a bounded error to assign from a bounded vector object while tampering with elements or cursors of that object is prohibited. Either Program_Error is raised by the assignment, execution proceeds with the target object prohibiting tampering with elements or cursors, or execution proceeds normally. 10/3 Bounded (Run-Time) Errors When a bounded vector object V is finalized, if tampering with cursors is prohibited for V other than due to an assignment from another vector, then execution is erroneous. 11/3 Erroneous Execution Implementation Requirements For each instance of Containers.Vectors and each instance of Containers.Bounded_Vectors, if the two instances meet the following conditions, then the output generated by the Vector'Output or Vector'Write subprograms of either instance shall be readable by the Vector'Input or Vector'Read of the other instance, respectively: • the Element_Type parameters of the two instances are statically matching subtypes of the same type; and 12/3 13/3 559 13 December 2012 The Generic Package Containers.Indefinite_Holders A.18.18 Ada Reference Manual — 2012 Edition 14/3 15/3 • • the output generated by Element_Type'Output or Element_Type'Write is readable by Element_Type'Input or Element_Type'Read, respectively (where Element_Type denotes the type of the two actual Element_Type parameters); and the preceding two conditions also hold for the Index_Type parameters of the instances. 16/3 Bounded vector objects should be implemented without implicit pointers or dynamic allocation. 17/3 The implementation advice for procedure Move to minimize copying does not apply. Implementation Advice A.18.20 The Generic Package Containers.Bounded_Doubly_Linked_Lists 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 The language-defined generic package Containers.Bounded_Doubly_Linked_Lists provides a private type List package provides Containers.Doubly_Linked_Lists (see A.18.3), with the difference that the maximum storage is bounded. operations. operations same and the the set of as It a Static Semantics The declaration of the generic library package Containers.Bounded_Doubly_Linked_Lists has the same contents and semantics as Containers.Doubly_Linked_Lists except: • The pragma Preelaborate is replaced with pragma Pure. • The type List is declared with a discriminant that specifies the capacity (maximum number of elements) as follows: type List (Capacity : Count_Type) is tagged private; • The type List needs finalization if and only if type Element_Type needs finalization. • The allocation of internal storage includes a check that the capacity is not exceeded, and Capacity_Error is raised if this check fails. • In procedure Assign, if Source length is greater than Target capacity, then Capacity_Error is propagated. • The function Copy is replaced with: function Copy (Source : List; Capacity : Count_Type := 0) return List; If Capacity is 0, then the list capacity is the length of Source; if Capacity is equal to or greater than the length of Source, the list capacity equals the value of the Capacity parameter; otherwise, the operation propagates Capacity_Error. • In the three-parameter procedure Splice whose Source has type List, if the sum of the length of Target and the length of Source is greater than the capacity of Target, then Splice propagates Capacity_Error. 13/3 • In the four-parameter procedure Splice, if the length of Target equals the capacity of Target, then Splice propagates Capacity_Error. 14/3 It is a bounded error to assign from a bounded list object while tampering with elements or cursors of that object is prohibited. Either Program_Error is raised by the assignment, execution proceeds with the target object prohibiting tampering with elements or cursors, or execution proceeds normally. Bounded (Run-Time) Errors A.18.19 The Generic Package Containers.Bounded_Vectors 13 December 2012 560 Ada Reference Manual — 2012 Edition When a bounded list object L is finalized, if tampering with cursors is prohibited for L other than due to an assignment from another list, then execution is erroneous. 15/3 Erroneous Execution Implementation Requirements each instance For of Containers.Doubly_Linked_Lists Containers.Bounded_Doubly_Linked_Lists, if the two instances meet the following conditions, then the output generated by the List'Output or List'Write subprograms of either instance shall be readable by the List'Input or List'Read of the other instance, respectively: instance each and of • • the Element_Type parameters of the two instances are statically matching subtypes of the same type; and the output generated by Element_Type'Output or Element_Type'Write is readable by Element_Type'Input or Element_Type'Read, respectively (where Element_Type denotes the type of the two actual Element_Type parameters). Bounded list objects should be implemented without implicit pointers or dynamic allocation. The implementation advice for procedure Move to minimize copying does not apply. Implementation Advice A.18.21 The Generic Package Containers.Bounded_Hashed_Maps The language-defined generic package Containers.Bounded_Hashed_Maps provides a private type Map and a set of operations. It provides the same operations as the package Containers.Hashed_Maps (see A.18.5), with the difference that the maximum storage is bounded. Static Semantics The declaration of the generic library package Containers.Bounded_Hashed_Maps has the same contents and semantics as Containers.Hashed_Maps except: • The pragma Preelaborate is replaced with pragma Pure. • The type Map is declared with discriminants that specify both the capacity (number of elements) and modulus (number of distinct hash values) of the hash table as follows: type Map (Capacity : Count_Type; Modulus : Hash_Type) is tagged private; • The type Map needs finalization if and only if type Key_Type or type Element_Type needs finalization. • The description of Reserve_Capacity is replaced with: If the specified Capacity is larger than the capacity of Container, then Reserve_Capacity propagates Capacity_Error. Otherwise, the operation has no effect. • An additional operation is added immediately following Reserve_Capacity: function Default_Modulus (Capacity : Count_Type) return Hash_Type; Default_Modulus returns an implementation-defined value for the number of distinct hash values to be used for the given capacity (maximum number of elements). • The function Copy is replaced with: function Copy (Source : Map; Capacity : Count_Type := 0; Modulus : Hash_Type := 0) return Map; 561 13 December 2012 The Generic Package Containers.Bounded_Doubly_Linked_Lists A.18.20 16/3 17/3 18/3 19/3 20/3 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 Ada Reference Manual — 2012 Edition 14/3 Returns a map with key/element pairs initialized from the values in Source. If Capacity is 0, then the map capacity is the length of Source; if Capacity is equal to or greater than the length of Source, the map capacity is the value of the Capacity parameter; otherwise, the operation propagates Capacity_Error. If the Modulus argument is 0, then the map modulus is the value returned by a call to Default_Modulus with the map capacity as its argument; otherwise, the map modulus is the value of the Modulus parameter. 15/3 It is a bounded error to assign from a bounded map object while tampering with elements or cursors of that object is prohibited. Either Program_Error is raised by the assignment, execution proceeds with the target object prohibiting tampering with elements or cursors, or execution proceeds normally. Bounded (Run-Time) Errors 16/3 When a bounded map object M is finalized, if tampering with cursors is prohibited for M other than due to an assignment from another map, then execution is erroneous. Erroneous Execution Implementation Requirements 17/3 18/3 19/3 20/3 For each instance of Containers.Hashed_Maps and each instance of Containers.Bounded_Hashed_Maps, if the two instances meet the following conditions, then the output generated by the Map'Output or Map'Write subprograms of either instance shall be readable by the Map'Input or Map'Read of the other instance, respectively: • • • the Element_Type parameters of the two instances are statically matching subtypes of the same type; and the output generated by Element_Type'Output or Element_Type'Write is readable by Element_Type'Input or Element_Type'Read, respectively (where Element_Type denotes the type of the two actual Element_Type parameters); and the preceding two conditions also hold for the Key_Type parameters of the instances. 21/3 Bounded hashed map objects should be implemented without implicit pointers or dynamic allocation. 22/3 The implementation advice for procedure Move to minimize copying does not apply. Implementation Advice A.18.22 The Generic Package Containers.Bounded_Ordered_Maps The language-defined generic package Containers.Bounded_Ordered_Maps provides a private type Map and a set of operations. It provides the same operations as the package Containers.Ordered_Maps (see A.18.6), with the difference that the maximum storage is bounded. Static Semantics The declaration of the generic library package Containers.Bounded_Ordered_Maps has the same contents and semantics as Containers.Ordered_Maps except: • The pragma Preelaborate is replaced with pragma Pure. • The type Map is declared with a discriminant that specifies the capacity (maximum number of elements) as follows: type Map (Capacity : Count_Type) is tagged private; 1/3 2/3 3/3 4/3 5/3 A.18.21 The Generic Package Containers.Bounded_Hashed_Maps 13 December 2012 562 Ada Reference Manual — 2012 Edition • The type Map needs finalization if and only if type Key_Type or type Element_Type needs finalization. • The allocation of a new node includes a check that the capacity is not exceeded, and Capacity_Error is raised if this check fails. • In procedure Assign, if Source length is greater than Target capacity, then Capacity_Error is propagated. • The function Copy is replaced with: function Copy (Source : Map; Capacity : Count_Type := 0) return Map; Returns a map with key/element pairs initialized from the values in Source. If Capacity is 0, then the map capacity is the length of Source; if Capacity is equal to or greater than the length of Source, the map capacity is the specified value; otherwise, the operation propagates Capacity_Error. 6/3 7/3 8/3 9/3 10/3 11/3 It is a bounded error to assign from a bounded map object while tampering with elements or cursors of that object is prohibited. Either Program_Error is raised by the assignment, execution proceeds with the target object prohibiting tampering with elements or cursors, or execution proceeds normally. 12/3 Bounded (Run-Time) Errors When a bounded map object M is finalized, if tampering with cursors is prohibited for M other than due to an assignment from another map, then execution is erroneous. 13/3 Erroneous Execution Implementation Requirements For each instance of Containers.Ordered_Maps and each instance of Containers.Bounded_Ordered_Maps, if the two instances meet the following conditions, then the output generated by the Map'Output or Map'Write subprograms of either instance shall be readable by the Map'Input or Map'Read of the other instance, respectively: • • • the Element_Type parameters of the two instances are statically matching subtypes of the same type; and the output generated by Element_Type'Output or Element_Type'Write is readable by Element_Type'Input or Element_Type'Read, respectively (where Element_Type denotes the type of the two actual Element_Type parameters); and the preceding two conditions also hold for the Key_Type parameters of the instances. Bounded ordered map objects should be implemented without implicit pointers or dynamic allocation. The implementation advice for procedure Move to minimize copying does not apply. Implementation Advice A.18.23 The Generic Package Containers.Bounded_Hashed_Sets The language-defined generic package Containers.Bounded_Hashed_Sets provides a private type Set and a set of operations. It provides the same operations as the package Containers.Hashed_Sets (see A.18.8), with the difference that the maximum storage is bounded. 14/3 15/3 16/3 17/3 18/3 19/3 1/3 563 13 December 2012 The Generic Package Containers.Bounded_Ordered_Maps A.18.22 Ada Reference Manual — 2012 Edition 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 14/3 Static Semantics The declaration of the generic library package Containers.Bounded_Hashed_Sets has the same contents and semantics as Containers.Hashed_Sets except: • The pragma Preelaborate is replaced with pragma Pure. • The type Set is declared with discriminants that specify both the capacity (number of elements) and modulus (number of distinct hash values) of the hash table as follows: type Set (Capacity : Count_Type; Modulus : Hash_Type) is tagged private; • The type Set needs finalization if and only if type Element_Type needs finalization. • The description of Reserve_Capacity is replaced with: If the specified Capacity is larger than the capacity of Container, then Reserve_Capacity propagates Capacity_Error. Otherwise, the operation has no effect. • An additional operation is added immediately following Reserve_Capacity: function Default_Modulus (Capacity : Count_Type) return Hash_Type; Default_Modulus returns an implementation-defined value for the number of distinct hash values to be used for the given capacity (maximum number of elements). • The function Copy is replaced with: function Copy (Source : Set; Capacity : Count_Type := 0; Modulus : Hash_Type := 0) return Set; Returns a set whose elements are initialized from the values in Source. If Capacity is 0, then the set capacity is the length of Source; if Capacity is equal to or greater than the length of Source, the set capacity is the value of the Capacity parameter; otherwise, the operation propagates Capacity_Error. If the Modulus argument is 0, then the set modulus is the value returned by a call to Default_Modulus with the set capacity as its argument; otherwise, the set modulus is the value of the Modulus parameter. 15/3 It is a bounded error to assign from a bounded set object while tampering with elements or cursors of that object is prohibited. Either Program_Error is raised by the assignment, execution proceeds with the target object prohibiting tampering with elements or cursors, or execution proceeds normally. Bounded (Run-Time) Errors 16/3 When a bounded set object S is finalized, if tampering with cursors is prohibited for S other than due to an assignment from another set, then execution is erroneous. Erroneous Execution Implementation Requirements 17/3 18/3 19/3 For each instance of Containers.Hashed_Sets and each instance of Containers.Bounded_Hashed_Sets, if the two instances meet the following conditions, then the output generated by the Set'Output or Set'Write subprograms of either instance shall be readable by the Set'Input or Set'Read of the other instance, respectively: • • the Element_Type parameters of the two instances are statically matching subtypes of the same type; and the output generated by Element_Type'Output or Element_Type'Write is readable by Element_Type'Input or Element_Type'Read, respectively (where Element_Type denotes the type of the two actual Element_Type parameters). A.18.23 The Generic Package Containers.Bounded_Hashed_Sets 13 December 2012 564 Ada Reference Manual — 2012 Edition Bounded hashed set objects should be implemented without implicit pointers or dynamic allocation. The implementation advice for procedure Move to minimize copying does not apply. Implementation Advice A.18.24 The Generic Package Containers.Bounded_Ordered_Sets The language-defined generic package Containers.Bounded_Ordered_Sets provides a private type Set and a set of operations. It provides the same operations as the package Containers.Ordered_Sets (see A.18.9), with the difference that the maximum storage is bounded. Static Semantics The declaration of the generic library package Containers.Bounded_Ordered_Sets has the same contents and semantics as Containers.Ordered_Sets except: • The pragma Preelaborate is replaced with pragma Pure. • The type Set is declared with a discriminant that specifies the capacity (maximum number of elements) as follows: type Set (Capacity : Count_Type) is tagged private; • The type Set needs finalization if and only if type Element_Type needs finalization. • If Insert (or Include) adds an element, a check is made that the capacity is not exceeded, and Capacity_Error is raised if this check fails. • In procedure Assign, if Source length is greater than Target capacity, then Capacity_Error is propagated. • The function Copy is replaced with: function Copy (Source : Set; Capacity : Count_Type := 0) return Set; Returns a set whose elements are initialized from the values in Source. If Capacity is 0, then the set capacity is the length of Source; if Capacity is equal to or greater than the length of Source, the set capacity is the specified value; otherwise, the operation propagates Capacity_Error. 20/3 21/3 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 It is a bounded error to assign from a bounded set object while tampering with elements or cursors of that object is prohibited. Either Program_Error is raised by the assignment, execution proceeds with the target object prohibiting tampering with elements or cursors, or execution proceeds normally. 12/3 Bounded (Run-Time) Errors When a bounded set object S is finalized, if tampering with cursors is prohibited for S other than due to an assignment from another set, then execution is erroneous. 13/3 Erroneous Execution Implementation Requirements For each instance of Containers.Ordered_Sets and each instance of Containers.Bounded_Ordered_Sets, if the two instances meet the following conditions, then the output generated by the Set'Output or Set'Write subprograms of either instance shall be readable by the Set'Input or Set'Read of the other instance, respectively: • the Element_Type parameters of the two instances are statically matching subtypes of the same type; and 14/3 15/3 565 13 December 2012 The Generic Package Containers.Bounded_Hashed_Sets A.18.23 Ada Reference Manual — 2012 Edition 16/3 • the output generated by Element_Type'Output or Element_Type'Write is readable by Element_Type'Input or Element_Type'Read, respectively (where Element_Type denotes the type of the two actual Element_Type parameters). 17/3 Bounded ordered set objects should be implemented without implicit pointers or dynamic allocation. 18/3 The implementation advice for procedure Move to minimize copying does not apply. Implementation Advice 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 14/3 A.18.25 The Generic Package Containers.Bounded_Multiway_Trees The language-defined generic package Containers.Bounded_Multiway_Trees provides a private type Tree and a set of operations. It provides the same operations as the package Containers.Multiway_Trees (see A.18.10), with the difference that the maximum storage is bounded. Static Semantics The declaration of the generic library package Containers.Bounded_Multiway_Trees has the same contents and semantics as Containers.Multiway_Trees except: • The pragma Preelaborate is replaced with pragma Pure. • The type Tree is declared with a discriminant that specifies the capacity (maximum number of elements) as follows: type Tree (Capacity : Count_Type) is tagged private; • The type Tree needs finalization if and only if type Element_Type needs finalization. • The allocation of internal storage includes a check that the capacity is not exceeded, and Capacity_Error is raised if this check fails. • In procedure Assign, if Source length is greater than Target capacity, then Capacity_Error is propagated. • Function Copy is declared as follows: function Copy (Source : Tree; Capacity : Count_Type := 0) return List; If Capacity is 0, then the tree capacity is the count of Source; if Capacity is equal to or greater than Source.Count, the tree capacity equals the value of the Capacity parameter; otherwise, the operation propagates Capacity_Error. • In the five-parameter procedure Splice_Subtree, if Source is not the same object as Target, and if the sum of Target.Count and Subtree_Node_Count (Position) is greater than Target.Capacity, then Splice_Subtree propagates Capacity_Error. • In the five-parameter procedure Splice_Children, if Source is not the same object as Target, and if the sum of Target.Count and Subtree_Node_Count (Source_Parent)-1 is greater than Target.Capacity, then Splice_Children propagates Capacity_Error. It is a bounded error to assign from a bounded tree object while tampering with elements or cursors of that object is prohibited. Either Program_Error is raised by the assignment, execution proceeds with the target object prohibiting tampering with elements or cursors, or execution proceeds normally. Bounded (Run-Time) Errors A.18.24 The Generic Package Containers.Bounded_Ordered_Sets 13 December 2012 566 Ada Reference Manual — 2012 Edition When a bounded tree object T is finalized, if tampering with cursors is prohibited for T other than due to an assignment from another tree, then execution is erroneous. 15/3 Erroneous Execution Implementation Requirements 16/3 17/3 18/3 19/3 20/3 each instance For of Containers.Multiway_Trees Containers.Bounded_Multiway_Trees, if the two instances meet the following conditions, then the output generated by the Tree'Output or Tree'Write subprograms of either instance shall be readable by the Tree'Input or Tree'Read of the other instance, respectively: instance each and of • • the Element_Type parameters of the two instances are statically matching subtypes of the same type; and the output generated by Element_Type'Output or Element_Type'Write is readable by Element_Type'Input or Element_Type'Read, respectively (where Element_Type denotes the type of the two actual Element_Type parameters). Bounded tree objects should be implemented without implicit pointers or dynamic allocation. The implementation advice for procedure Move to minimize copying does not apply. Implementation Advice 567 13 December 2012 The Generic Package Containers.Bounded_Multiway_Trees A.18.25 Ada Reference Manual — 2012 Edition A.18.26 Array Sorting 1/3 language-defined generic procedures Containers.Generic_Array_Sort, Containers.Generic_- The Constrained_Array_Sort, and Containers.Generic_Sort provide sorting on arbitrary array types. 2/2 3/2 4/2 5/3 6/2 7/2 8/2 9/3 The generic library procedure Containers.Generic_Array_Sort has the following declaration: Static Semantics generic type Index_Type is (<>); type Element_Type is private; type Array_Type is array (Index_Type range <>) of Element_Type; with function "<" (Left, Right : Element_Type) return Boolean is <>; procedure Ada.Containers.Generic_Array_Sort (Container : in out Array_Type); pragma Pure(Ada.Containers.Generic_Array_Sort); Reorders the elements of Container such that the elements are sorted smallest first as determined by the generic formal "<" operator provided. Any exception raised during evaluation of "<" is propagated. The actual function for the generic formal function "<" of Generic_Array_Sort is expected to return the same value each time it is called with a particular pair of element values. It should define a strict weak ordering relationship (see A.18); it should not modify Container. If the instance of actual for "<" behaves Generic_Array_Sort is unspecified. The number of times Generic_Array_Sort calls "<" is unspecified. in some other manner, the behavior of the The generic library procedure Containers.Generic_Constrained_Array_Sort has the following declaration: generic type Index_Type is (<>); type Element_Type is private; type Array_Type is array (Index_Type) of Element_Type; with function "<" (Left, Right : Element_Type) return Boolean is <>; procedure Ada.Containers.Generic_Constrained_Array_Sort (Container : in out Array_Type); pragma Pure(Ada.Containers.Generic_Constrained_Array_Sort); Reorders the elements of Container such that the elements are sorted smallest first as determined by the generic formal "<" operator provided. Any exception raised during evaluation of "<" is propagated. The actual function for the generic formal function "<" of Generic_Constrained_Array_Sort is expected to return the same value each time it is called with a particular pair of element values. It should define a strict weak ordering relationship (see A.18); it should not modify Container. If the actual for "<" behaves in some other manner, the behavior of the instance of Generic_Constrained_Array_Sort times unspecified. Generic_Constrained_Array_Sort calls "<" is unspecified. number The of is 9.1/3 9.2/3 The generic library procedure Containers.Generic_Sort has the following declaration: generic type Index_Type is (<>); with function Before (Left, Right : Index_Type) return Boolean; with procedure Swap (Left, Right : Index_Type); procedure Ada.Containers.Generic_Sort (First, Last : Index_Type'Base); pragma Pure(Ada.Containers.Generic_Sort); A.18.26 Array Sorting 13 December 2012 568 Ada Reference Manual — 2012 Edition Reorders the elements of an indexable structure, over the range First .. Last, such that the elements are sorted in the ordering determined by the generic formal function Before; Before should return True if Left is to be sorted before Right. The generic formal Before compares the elements having the given indices, and the generic formal Swap exchanges the values of the indicated elements. Any exception raised during evaluation of Before or Swap is propagated. The actual function for the generic formal function Before of Generic_Sort is expected to return the same value each time it is called with index values that identify a particular pair of element values. It should define a strict weak ordering relationship (see A.18); it should not modify the elements. The actual function for the generic formal Swap should exchange the values of the indicated elements. If the actual for either Before or Swap behaves in some other manner, the behavior of Generic_Sort is unspecified. The number of times the Generic_Sort calls Before or Swap is unspecified. 9.3/3 9.4/3 Implementation Advice The worst-case time complexity of a call on an instance of Containers.Generic_Array_Sort or Containers.Generic_Constrained_Array_Sort should be O(N**2) or better, and the average time complexity should be better than O(N**2), where N is the length of the Container parameter. 10/2 Containers.Generic_Array_Sort and Containers.Generic_Constrained_Array_Sort copying of elements. should minimize 11/2 The worst-case time complexity of a call on an instance of Containers.Generic_Sort should be O(N**2) or better, and the average time complexity should be better than O(N**2), where N is the difference between the Last and First parameters plus 1. Containers.Generic_Sort should minimize calls to the generic formal Swap. 12/3 13/3 A.18.27 The Generic Package Containers.Synchronized_Queue_Interfaces The language-defined generic package Containers.Synchronized_Queue_Interfaces provides interface type Queue, and a set of operations for that type. Interface Queue specifies a first-in, first-out queue. 1/3 The generic library package Containers.Synchronized_Queue_Interfaces has the following declaration: Static Semantics generic type Element_Type is private; package Ada.Containers.Synchronized_Queue_Interfaces is pragma Pure(Synchronized_Queue_Interfaces); type Queue is synchronized interface; procedure Enqueue (Container : in out Queue; New_Item : in Element_Type) is abstract with Synchronization => By_Entry; procedure Dequeue (Container : in out Queue; Element : out Element_Type) is abstract with Synchronization => By_Entry; function Current_Use (Container : Queue) return Count_Type is abstract; function Peak_Use (Container : Queue) return Count_Type is abstract; end Ada.Containers.Synchronized_Queue_Interfaces; 2/3 3/3 4/3 5/3 6/3 7/3 8/3 569 13 December 2012 Array Sorting A.18.26 9/3 10/3 11/3 12/3 13/3 14/3 15/3 16/3 17/3 1/3 2/3 3/3 4/3 5/3 6/3 Ada Reference Manual — 2012 Edition procedure Enqueue (Container : in out Queue; New_Item : in Element_Type) is abstract; A queue type that implements this interface is allowed to have a bounded capacity. If the queue object has a bounded capacity, and the number of existing elements equals the capacity, then Enqueue blocks until storage becomes available; otherwise, Enqueue does not block. In any case, it then copies New_Item onto the queue. procedure Dequeue (Container : in out Queue; Element : out Element_Type) is abstract; If the queue is empty, then Dequeue blocks until an item becomes available. In any case, it then assigns the element at the head of the queue to Element, and removes it from the queue. function Current_Use (Container : Queue) return Count_Type is abstract; Returns the number of elements currently in the queue. function Peak_Use (Container : Queue) return Count_Type is abstract; Returns the maximum number of elements that have been in the queue at any one time. NOTES 51 Unlike other language-defined containers, there are no queues whose element types are indefinite. Elements of an indefinite type can be handled by defining the element of the queue to be a holder container (see A.18.18) of the indefinite type, or to be an explicit access type that designates the indefinite type. A.18.28 The Generic Package Containers.Unbounded_Synchronized_Queues Static Semantics The language-defined generic package Containers.Unbounded_Synchronized_Queues provides type Queue, which implements the interface type Containers.Synchronized_Queue_Interfaces.Queue. with System; with Ada.Containers.Synchronized_Queue_Interfaces; generic with package Queue_Interfaces is new Ada.Containers.Synchronized_Queue_Interfaces (<>); Default_Ceiling : System.Any_Priority := System.Priority'Last; package Ada.Containers.Unbounded_Synchronized_Queues is pragma Preelaborate(Unbounded_Synchronized_Queues); package Implementation is ... -- not specified by the language end Implementation; protected type Queue (Ceiling : System.Any_Priority := Default_Ceiling) with Priority => Ceiling is new Queue_Interfaces.Queue with overriding entry Enqueue (New_Item : in Queue_Interfaces.Element_Type); overriding entry Dequeue (Element : out Queue_Interfaces.Element_Type); overriding function Current_Use return Count_Type; overriding function Peak_Use return Count_Type; A.18.27 The Generic Package Containers.Synchronized_Queue_Interfaces 13 December 2012 570 Ada Reference Manual — 2012 Edition private ... -- not specified by the language end Queue; private ... -- not specified by the language end Ada.Containers.Unbounded_Synchronized_Queues; The type Queue is used to represent task-safe queues. The capacity for instances of type Queue is unbounded. A.18.29 The Generic Package Containers.Bounded_Synchronized_Queues Static Semantics The language-defined generic package Containers.Bounded_Synchronized_Queues provides type Queue, which implements the interface type Containers.Synchronized_Queue_Interfaces.Queue. with System; with Ada.Containers.Synchronized_Queue_Interfaces; generic with package Queue_Interfaces is new Ada.Containers.Synchronized_Queue_Interfaces (<>); Default_Capacity : Count_Type; Default_Ceiling : System.Any_Priority := System.Priority'Last; package Ada.Containers.Bounded_Synchronized_Queues is pragma Preelaborate(Bounded_Synchronized_Queues); package Implementation is ... -- not specified by the language end Implementation; protected type Queue (Capacity : Count_Type := Default_Capacity; Ceiling : System.Any_Priority := Default_Ceiling) with Priority => Ceiling is new Queue_Interfaces.Queue with overriding entry Enqueue (New_Item : in Queue_Interfaces.Element_Type); overriding entry Dequeue (Element : out Queue_Interfaces.Element_Type); overriding function Current_Use return Count_Type; overriding function Peak_Use return Count_Type; private ... -- not specified by the language end Queue; private ... -- not specified by the language end Ada.Containers.Bounded_Synchronized_Queues; The semantics are the same as for Unbounded_Synchronized_Queues, except: • The capacity for instances of type Queue is bounded and specified by the discriminant Capacity. Bounded queue objects should be implemented without implicit pointers or dynamic allocation. Implementation Advice 571 13 December 2012 The Generic Package Containers.Unbounded_Synchronized_Queues A.18.28 7/3 8/3 9/3 10/3 11/3 12/3 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 Ada Reference Manual — 2012 Edition A.18.30 The Generic Package Containers.Unbounded_Priority_Queues The language-defined generic package Containers.Unbounded_Priority_Queues provides type Queue, which implements the interface type Containers.Synchronized_Queue_Interfaces.Queue. Static Semantics with System; with Ada.Containers.Synchronized_Queue_Interfaces; generic with package Queue_Interfaces is new Ada.Containers.Synchronized_Queue_Interfaces (<>); type Queue_Priority is private; with function Get_Priority (Element : Queue_Interfaces.Element_Type) return Queue_Priority is <>; with function Before (Left, Right : Queue_Priority) return Boolean is <>; Default_Ceiling : System.Any_Priority := System.Priority'Last; package Ada.Containers.Unbounded_Priority_Queues is pragma Preelaborate(Unbounded_Priority_Queues); package Implementation is ... -- not specified by the language end Implementation; protected type Queue (Ceiling : System.Any_Priority := Default_Ceiling) with Priority => Ceiling is new Queue_Interfaces.Queue with overriding entry Enqueue (New_Item : in Queue_Interfaces.Element_Type); overriding entry Dequeue (Element : out Queue_Interfaces.Element_Type); not overriding procedure Dequeue_Only_High_Priority (At_Least : in Queue_Priority; Element : in out Queue_Interfaces.Element_Type; Success : out Boolean); overriding function Current_Use return Count_Type; overriding function Peak_Use return Count_Type; private ... -- not specified by the language end Queue; private ... -- not specified by the language end Ada.Containers.Unbounded_Priority_Queues; The type Queue is used to represent task-safe priority queues. 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 The capacity for instances of type Queue is unbounded. 14/3 15/3 Two elements E1 and E2 are equivalent Before(Get_Priority(E2), Get_Priority(E1)) both return False. if Before(Get_Priority(E1), Get_Priority(E2)) and The actual functions for Get_Priority and Before are expected to return the same value each time they are called with the same actuals, and should not modify their actuals. Before should define a strict weak ordering relationship (see A.18). If the actual functions behave in some other manner, the behavior of Unbounded_Priority_Queues is unspecified. A.18.30 The Generic Package Containers.Unbounded_Priority_Queues 13 December 2012 572 Ada Reference Manual — 2012 Edition Enqueue inserts an item according to the order specified by the Before function on the result of Get_Priority on the elements; Before should return True if Left is to be inserted before Right. If the queue already contains elements equivalent to New_Item, then it is inserted after the existing equivalent elements. For a call on Dequeue_Only_High_Priority, if the head of the nonempty queue is E, and the function Before(At_Least, Get_Priority(E)) returns False, then E is assigned to Element and then removed from the queue, and Success is set to True; otherwise, Success is set to False and Element is unchanged. A.18.31 The Generic Package Containers.Bounded_Priority_Queues The language-defined generic package Containers.Bounded_Priority_Queues provides type Queue, which implements the interface type Containers.Synchronized_Queue_Interfaces.Queue. Static Semantics with System; with Ada.Containers.Synchronized_Queue_Interfaces; generic with package Queue_Interfaces is new Ada.Containers.Synchronized_Queue_Interfaces (<>); type Queue_Priority is private; with function Get_Priority (Element : Queue_Interfaces.Element_Type) return Queue_Priority is <>; with function Before (Left, Right : Queue_Priority) return Boolean is <>; Default_Capacity : Count_Type; Default_Ceiling : System.Any_Priority := System.Priority'Last; package Ada.Containers.Bounded_Priority_Queues is pragma Preelaborate(Bounded_Priority_Queues); package Implementation is ... -- not specified by the language end Implementation; protected type Queue (Capacity : Count_Type := Default_Capacity; Ceiling : System.Any_Priority := Default_Ceiling) with Priority => Ceiling is new Queue_Interfaces.Queue with overriding entry Enqueue (New_Item : in Queue_Interfaces.Element_Type); overriding entry Dequeue (Element : out Queue_Interfaces.Element_Type); not overriding procedure Dequeue_Only_High_Priority (At_Least : in Queue_Priority; Element : in out Queue_Interfaces.Element_Type; Success : out Boolean); overriding function Current_Use return Count_Type; overriding function Peak_Use return Count_Type; private ... -- not specified by the language end Queue; private ... -- not specified by the language end Ada.Containers.Bounded_Priority_Queues; 16/3 17/3 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 573 13 December 2012 The Generic Package Containers.Unbounded_Priority_Queues A.18.30 Ada Reference Manual — 2012 Edition 12/3 13/3 The semantics are the same as for Unbounded_Priority_Queues, except: • The capacity for instances of type Queue is bounded and specified by the discriminant Capacity. 14/3 Bounded priority queue objects should be implemented without implicit pointers or dynamic allocation. Implementation Advice A.18.32 Example of Container Use Examples The following example is an implementation of Dijkstra's shortest path algorithm in a directed graph with positive distances. The graph is represented by a map from nodes to sets of edges. with Ada.Containers.Vectors; with Ada.Containers.Doubly_Linked_Lists; use Ada.Containers; generic type Node is range <>; package Shortest_Paths is type Distance is new Float range 0.0 .. Float'Last; type Edge is record To, From : Node; Length : Distance; end record; package Node_Maps is new Vectors (Node, Node); -- The algorithm builds a map to indicate the node used to reach a given -- node in the shortest distance. package Adjacency_Lists is new Doubly_Linked_Lists (Edge); use Adjacency_Lists; package Graphs is new Vectors (Node, Adjacency_Lists.List); package Paths is new Doubly_Linked_Lists (Node); function Shortest_Path (G : Graphs.Vector; Source : Node; Target : Node) return Paths.List with Pre => G (Source) /= Adjacency_Lists.Empty_List; end Shortest_Paths; package body Shortest_Paths is function Shortest_Path (G : Graphs.Vector; Source : Node; Target : Node) return Paths.List is use Adjacency_Lists, Node_Maps, Paths, Graphs; Reached : array (Node) of Boolean := (others => False); -- The set of nodes whose shortest distance to the source is known. Reached_From : array (Node) of Node; So_Far : array (Node) of Distance := (others => Distance'Last); The_Path : Paths.List := Paths.Empty_List; Nearest_Distance : Distance; Next : Node; begin So_Far(Source) := 0.0; while not Reached(Target) loop Nearest_Distance := Distance'Last; -- Find closest node not reached yet, by iterating over all nodes. -- A more efficient algorithm uses a priority queue for this step. 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 A.18.31 The Generic Package Containers.Bounded_Priority_Queues 13 December 2012 574 Ada Reference Manual — 2012 Edition Next := Source; for N in Node'First .. Node'Last loop if not Reached(N) and then So_Far(N) < Nearest_Distance then Next := N; Nearest_Distance := So_Far(N); end if; end loop; if Nearest_Distance = Distance'Last then -- No next node found, graph is not connected return Paths.Empty_List; else Reached(Next) := True; end if; -- Update minimum distance to newly reachable nodes. for E of G (Next) loop if not Reached(E.To) then Nearest_Distance := E.Length + So_Far(Next); if Nearest_Distance < So_Far(E.To) then Reached_From(E.To) := Next; So_Far(E.To) := Nearest_Distance; end if; end if; end loop; end loop; -- Rebuild path from target to source. declare N : Node := Target; begin while N /= Source loop N := Reached_From(N); Prepend (The_Path, N); end loop; end; return The_Path; end; end Shortest_Paths; Note that the effect of the Constant_Indexing aspect (on type Vector) and the Implicit_Dereference aspect (on type Reference_Type) is that G (Next) is a convenient short hand for G.Constant_Reference (Next).Element.all Similarly, the effect of the loop: for E of G (Next) loop if not Reached(E.To) then ... end if; end loop; 13/3 14/3 15/3 16/3 17/3 18/3 19/3 20/3 21/3 22/3 23/3 24/3 25/3 26/3 27/3 575 13 December 2012 Example of Container Use A.18.32 Ada Reference Manual — 2012 Edition 28/3 29/3 30/3 31/3 is the same as: for C in G (Next).Iterate loop declare E : Edge renames G (Next)(C).all; begin if not Reached(E.To) then ... end if; end; end loop; which is the same as: declare L : Adjacency_Lists.List renames G (Next); C : Adjacency_Lists.Cursor := L.First; begin while Has_Element (C) loop declare E : Edge renames L(C).all; begin if not Reached(E.To) then ... end if; end; C := L.Next (C); end loop; end; A.19 The Package Locales 1/3 A locale identifies a geopolitical place or region and its associated language, which can be used to determine other internationalization-related characteristics. 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 The library package Locales has the following declaration: Static Semantics package Ada.Locales is pragma Preelaborate(Locales); pragma Remote_Types(Locales); type Language_Code is array (1 .. 3) of Character range 'a' .. 'z'; type Country_Code is array (1 .. 2) of Character range 'A' .. 'Z'; Language_Unknown : constant Language_Code := "und"; Country_Unknown : constant Country_Code := "ZZ"; function Language return Language_Code; function Country return Country_Code; end Ada.Locales; The active locale is the locale associated with the partition of the current task. Language_Code is a lower-case string representation of an ISO 639-3 alpha-3 code that identifies a language. Country_Code is an upper-case string representation of an ISO 3166-1 alpha-2 code that identifies a country. Function Language returns the code of the language associated with the active locale. If the Language_Code associated with the active locale cannot be determined from the environment, then Language returns Language_Unknown. A.18.32 Example of Container Use 13 December 2012 576 Function Country returns the code of the country associated with the active locale. If the Country_Code associated with the active locale cannot be determined from the environment, then Country returns Country_Unknown. 12/3 Ada Reference Manual — 2012 Edition 577 13 December 2012 The Package Locales A.19 Ada Reference Manual — 2012 Edition Annex B (normative) Interface to Other Languages This Annex describes features for writing mixed-language programs. General interface support is presented first; then specific support for C, COBOL, and Fortran is defined, in terms of language interface packages for each of these languages. Implementation Requirements Support for interfacing to any foreign language is optional. However, an implementation shall not provide any optional aspect, attribute, library unit, or pragma having the same name as an aspect, attribute, library unit, or pragma (respectively) specified in the subclauses of this Annex unless the provided construct is either as specified in those subclauses or is more limited in capability than that required by those subclauses. A program that attempts to use an unsupported capability of this Annex shall either be identified by the implementation before run time or shall raise an exception at run time. B.1 Interfacing Aspects An interfacing aspect is a representation aspect that is one of the aspects Import, Export, Link_Name, External_Name, or Convention. Specifying the Import aspect to have the value True is used to import an entity defined in a foreign language into an Ada program, thus allowing a foreign-language subprogram to be called from Ada, or a foreign-language variable to be accessed from Ada. In contrast, specifying the Export aspect to have the value True is used to export an Ada entity to a foreign language, thus allowing an Ada subprogram to be called from a foreign language, or an Ada object to be accessed from a foreign language. The Import and Export aspects are intended primarily for objects and subprograms, although implementations are allowed to support other entities. The Link_Name and External_Name aspects are used to specify the link name and external name, respectively, to be used to identify imported or exported entities in the external environment. 1 2/3 0.1/3 1/3 The Convention aspect is used to indicate that an Ada entity should use the conventions of another language. It is intended primarily for types and “callback” subprograms. For example, “with Convention => Fortran” on the declaration of an array type Matrix implies that Matrix should be represented according to the conventions of the supported Fortran implementation, namely column-major order. 2/3 A pragma Linker_Options is used to specify the system linker parameters needed when a given compilation unit is included in a partition. 3 The form of a pragma Linker_Options is as follows: Paragraphs 5 through 7 were moved to Annex J, “Obsolescent Features”. pragma Linker_Options(string_expression); Syntax A pragma Linker_Options is allowed only at the place of a declarative_item. This paragraph was deleted. 4/3 8 9 9.1/3 579 13 December 2012 Interface to Other Languages B Ada Reference Manual — 2012 Edition 9.2/3 The Import and Export aspects are of type Boolean. 10/3 The Link_Name and External_Name aspects are of type String. Name Resolution Rules 10.1/3 The expected type for the string_expression in pragma Linker_Options is String. 11/3 12 13 14/3 15 16 17/3 18 19 20 21/3 22/3 23/3 24 25/3 26/3 27/3 Legality Rules The aspect Convention shall be specified by a convention_identifier which shall be the name of a convention. The convention names are implementation defined, except for certain language-defined ones, such as Ada and Intrinsic, as explained in 6.3.1, “Conformance Rules”. Additional convention names generally represent the calling conventions of foreign languages, language implementations, or specific run-time models. The convention of a callable entity is its calling convention. If L is a convention_identifier for a language, then a type T is said to be compatible with convention L, (alternatively, is said to be an L-compatible type) if any of the following conditions are met: • T is declared in a language interface package corresponding to L and is defined to be L- compatible (see B.3, B.3.1, B.3.2, B.4, B.5), • Convention L has been specified for T, and T is eligible for convention L; that is: • T is an array type with either an unconstrained or statically-constrained first subtype, and its component type is L-compatible, • T is a record type that has no discriminants and that only has components with statically- constrained subtypes, and each component type is L-compatible, • T is an access-to-object type, its designated type is L-compatible, and its designated subtype is not an unconstrained array subtype, • T is an access-to-subprogram type, and its designated profile's parameter and result types are all L-compatible. • T is derived from an L-compatible type, • The implementation permits T as an L-compatible type. If the Convention aspect is specified for a type, then the type shall either be compatible with or eligible for the specified convention. Notwithstanding any rule to the contrary, a declaration with a True Import aspect shall not have a completion. An entity with a True Import aspect (or Export aspect) is said to be imported (respectively, exported). An entity shall not be both imported and exported. The declaration of an imported object shall not include an explicit initialization expression. Default initializations are not performed. The type of an imported or exported object shall be compatible with the specified Convention aspect, if any. For an imported or exported subprogram, the result and parameter types shall each be compatible with the specified Convention aspect, if any. The aspect_definition (if any) used to directly specify an Import, Export, External_Name, or Link_Name aspect shall be a static expression. The string_expression of a pragma Linker_Options shall be static. An B.1 Interfacing Aspects 13 December 2012 580 Ada Reference Manual — 2012 Edition External_Name or Link_Name aspect shall be specified only for an entity that is either imported or exported. Paragraphs 28 and 29 were deleted. Static Semantics The Convention aspect represents the calling convention or representation convention of the entity. For an access-to-subprogram type, it represents the calling convention of designated subprograms. In addition: • A True Import aspect indicates that the entity is defined externally (that is, outside the Ada program). This aspect is never inherited; if not directly specified, the Import aspect is False. • A True Export aspect indicates that the entity is used externally. This aspect is never inherited; if not directly specified, the Export aspect is False. • For an entity with a True Import or Export aspect, an external name, link name, or both may also be specified. An external name is a string value for the name used by a foreign language program either for an entity that an Ada program imports, or for referring to an entity that an Ada program exports. A link name is a string value for the name of an exported or imported entity, based on the conventions of the foreign language's compiler in interfacing with the system's linker tool. The meaning of link names is implementation defined. If neither a link name nor the Address attribute of an imported or exported entity is specified, then a link name is chosen in an implementation-defined manner, based on the external name if one is specified. Pragma Linker_Options has the effect of passing its string argument as a parameter to the system linker (if one exists), if the immediately enclosing compilation unit is included in the partition being linked. The interpretation of the string argument, and the way in which the string arguments from multiple Linker_Options pragmas are combined, is implementation defined. 30/3 31/3 32/3 33/3 34 35 36 37 Notwithstanding what this International Standard says elsewhere, the elaboration of a declaration with a True Import aspect does not create the entity. Such an elaboration has no other effect than to allow the defining name to denote the external entity. 38/3 Dynamic Semantics It is the programmer's responsibility to ensure that the use of interfacing aspects does not violate Ada semantics; otherwise, program execution is erroneous. 38.1/3 Erroneous Execution Implementation Advice If an implementation supports Export for a given language, then it should also allow the main subprogram to be written in that language. It should support some mechanism for invoking the elaboration of the Ada library units included in the system, and for invoking the finalization of the environment task. On typical systems, the recommended mechanism is to provide two subprograms whose link names are "adainit" and "adafinal". Adainit should contain the elaboration code for library units. Adafinal should contain the finalization code. These subprograms should have no effect the second and subsequent time they are called. 39/3 Automatic elaboration of preelaborated packages should be provided when specifying the Export aspect as True is supported. 40/3 581 13 December 2012 Interfacing Aspects B.1 Ada Reference Manual — 2012 Edition 41/3 42/3 43/3 44/3 47 48/3 49/2 For each supported convention L other than Intrinsic, an implementation should support specifying the Import and Export aspects for objects of L-compatible types and for subprograms, and the Convention aspect for L-eligible types and for subprograms, presuming the other language has corresponding features. Specifying the Convention aspect need not be supported for scalar types. NOTES 1 Implementations may place restrictions on interfacing aspects; for example, requiring each exported entity to be declared at the library level. 2 The Convention aspect in combination with the Import aspect indicates the conventions for accessing external entities. It is possible that the actual entity is written in assembly language, but reflects the conventions of a particular language. For example, with Convention => Ada can be used to interface to an assembly language routine that obeys the Ada compiler's calling conventions. 3 To obtain “call-back” to an Ada subprogram from a foreign language environment, the Convention aspect should be specified both for the access-to-subprogram type and the specific subprogram(s) to which 'Access is applied. Paragraphs 45 and 46 were deleted. 4 See also 13.8, “Machine Code Insertions”. 5 If both External_Name and Link_Name are specified for a given entity, then the External_Name is ignored. This paragraph was deleted. 50 Example of interfacing pragmas: Examples 51/3 1 2 3 4 5 package Fortran_Library is function Sqrt (X : Float) return Float with Import => True, Convention => Fortran; type Matrix is array (Natural range <>, Natural range <>) of Float with Convention => Fortran; function Invert (M : Matrix) return Matrix with Import => True, Convention => Fortran; end Fortran_Library; B.2 The Package Interfaces Package Interfaces is the parent of several library packages that declare types and other entities useful for interfacing to foreign languages. It also contains some implementation-defined types that are useful across more than one language (in particular for interfacing to assembly language). The library package Interfaces has the following skeletal declaration: Static Semantics package Interfaces is pragma Pure(Interfaces); type Integer_n is range -2**(n-1) .. 2**(n-1) - 1; --2's complement type Unsigned_n is mod 2**n; B.1 Interfacing Aspects 13 December 2012 582 Ada Reference Manual — 2012 Edition function Shift_Left (Value : Unsigned_n; Amount : Natural) return Unsigned_n; function Shift_Right (Value : Unsigned_n; Amount : Natural) return Unsigned_n; function Shift_Right_Arithmetic (Value : Unsigned_n; Amount : Natural) return Unsigned_n; function Rotate_Left (Value : Unsigned_n; Amount : Natural) return Unsigned_n; function Rotate_Right (Value : Unsigned_n; Amount : Natural) return Unsigned_n; ... end Interfaces; Implementation Requirements An implementation shall provide the following declarations in the visible part of package Interfaces: • Signed and modular integer types of n bits, if supported by the target architecture, for each n that is at least the size of a storage element and that is a factor of the word size. The names of these types are of the form Integer_n for the signed types, and Unsigned_n for the modular types; • For each such modular type in Interfaces, shifting and rotating subprograms as specified in the declaration of Interfaces above. These subprograms are Intrinsic. They operate on a bit-by-bit basis, using the binary representation of the value of the operands to yield a binary representation for the result. The Amount parameter gives the number of bits by which to shift or rotate. For shifting, zero bits are shifted in, except in the case of Shift_Right_Arithmetic, where one bits are shifted in if Value is at least half the modulus. • Floating point types corresponding to each floating point format fully supported by the hardware. Implementation Permissions An implementation may provide implementation-defined library units that are children of Interfaces, and may add declarations to the visible part of Interfaces in addition to the ones defined above. A child package of package Interfaces with the name of a convention may be provided independently of whether the convention is supported by the Convention aspect and vice versa. Such a child package should contain any declarations that would be useful for interfacing to the language (implementation) represented by the convention. Any declarations useful for interfacing to any language on the given hardware architecture should be provided directly in Interfaces. This paragraph was deleted. Implementation Advice An implementation supporting an interface to C, COBOL, or Fortran should provide the corresponding package or packages described in the following subclauses. B.3 Interfacing with C and C++ The facilities relevant to interfacing with the C language and the corresponding subset of the C++ language are the package Interfaces.C and its children, and support for specifying the Convention aspect with convention_identifiers C and C_Pass_By_Copy. The package Interfaces.C contains the basic types, constants, and subprograms that allow an Ada program to pass scalars and strings to C and C++ functions. When this subclause mentions a C entity, the reference also applies to the corresponding entity in C++. 6 7 8 9 10 11 11.1/3 12/2 13/3 1/3 2/3 583 13 December 2012 The Package Interfaces B.2 Ada Reference Manual — 2012 Edition The library package Interfaces.C has the following declaration: Static Semantics package Interfaces.C is pragma Pure(C); -- Declarations based on C's CHAR_BIT : constant := implementation-defined; -- typically 8 SCHAR_MIN : constant := implementation-defined; -- typically –128 SCHAR_MAX : constant := implementation-defined; -- typically 127 UCHAR_MAX : constant := implementation-defined; -- typically 255 -- Signed and Unsigned Integers type int is range implementation-defined; type short is range implementation-defined; type long is range implementation-defined; type signed_char is range SCHAR_MIN .. SCHAR_MAX; for signed_char'Size use CHAR_BIT; type unsigned is mod implementation-defined; type unsigned_short is mod implementation-defined; type unsigned_long is mod implementation-defined; type unsigned_char is mod (UCHAR_MAX+1); for unsigned_char'Size use CHAR_BIT; subtype plain_char is implementation-defined; type ptrdiff_t is range implementation-defined; type size_t is mod implementation-defined; -- Floating Point type C_float is digits implementation-defined; type double is digits implementation-defined; type long_double is digits implementation-defined; -- Characters and Strings type char is ; nul : constant char := implementation-defined; function To_C (Item : in Character) return char; function To_Ada (Item : in char) return Character; type char_array is array (size_t range <>) of aliased char with Pack; for char_array'Component_Size use CHAR_BIT; function Is_Nul_Terminated (Item : in char_array) return Boolean; function To_C (Item : in String; Append_Nul : in Boolean := True) return char_array; function To_Ada (Item : in char_array; Trim_Nul : in Boolean := True) return String; procedure To_C (Item : in String; Target : out char_array; Count : out size_t; Append_Nul : in Boolean := True); procedure To_Ada (Item : in char_array; Target : out String; Count : out Natural; Trim_Nul : in Boolean := True); -- Wide Character and Wide String type wchar_t is ; 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20/1 21 22 23/3 24 25 26 27 28 29 30/1 B.3 Interfacing with C and C++ 13 December 2012 584 Ada Reference Manual — 2012 Edition wide_nul : constant wchar_t := implementation-defined; function To_C (Item : in Wide_Character) return wchar_t; function To_Ada (Item : in wchar_t ) return Wide_Character; type wchar_array is array (size_t range <>) of aliased wchar_t with Pack; This paragraph was deleted. function Is_Nul_Terminated (Item : in wchar_array) return Boolean; function To_C (Item : in Wide_String; Append_Nul : in Boolean := True) return wchar_array; function To_Ada (Item : in wchar_array; Trim_Nul : in Boolean := True) return Wide_String; procedure To_C (Item : in Wide_String; Target : out wchar_array; Count : out size_t; Append_Nul : in Boolean := True); procedure To_Ada (Item : in wchar_array; Target : out Wide_String; Count : out Natural; Trim_Nul : in Boolean := True); -- ISO/IEC 10646:2003 compatible types defined by ISO/IEC TR 19769:2004. type char16_t is ; char16_nul : constant char16_t := implementation-defined; function To_C (Item : in Wide_Character) return char16_t; function To_Ada (Item : in char16_t) return Wide_Character; type char16_array is array (size_t range <>) of aliased char16_t with Pack; This paragraph was deleted. function Is_Nul_Terminated (Item : in char16_array) return Boolean; function To_C (Item : in Wide_String; Append_Nul : in Boolean := True) return char16_array; function To_Ada (Item : in char16_array; Trim_Nul : in Boolean := True) return Wide_String; procedure To_C (Item : in Wide_String; Target : out char16_array; Count : out size_t; Append_Nul : in Boolean := True); procedure To_Ada (Item : in char16_array; Target : out Wide_String; Count : out Natural; Trim_Nul : in Boolean := True); type char32_t is ; char32_nul : constant char32_t := implementation-defined; function To_C (Item : in Wide_Wide_Character) return char32_t; function To_Ada (Item : in char32_t) return Wide_Wide_Character; type char32_array is array (size_t range <>) of aliased char32_t with Pack; This paragraph was deleted. function Is_Nul_Terminated (Item : in char32_array) return Boolean; function To_C (Item : in Wide_Wide_String; Append_Nul : in Boolean := True) return char32_array; 31/1 32 33/3 34/3 35 36 37 38 39 39.1/2 39.2/2 39.3/2 39.4/2 39.5/3 39.6/3 39.7/2 39.8/2 39.9/2 39.10/2 39.11/2 39.12/2 39.13/2 39.14/3 39.15/3 39.16/2 585 13 December 2012 Interfacing with C and C++ B.3 39.17/2 39.18/2 39.19/2 40 41 42 43/2 44 45 46 47 48 49 50/2 51 Ada Reference Manual — 2012 Edition function To_Ada (Item : in char32_array; Trim_Nul : in Boolean := True) return Wide_Wide_String; procedure To_C (Item : in Wide_Wide_String; Target : out char32_array; Count : out size_t; Append_Nul : in Boolean := True); procedure To_Ada (Item : in char32_array; Target : out Wide_Wide_String; Count : out Natural; Trim_Nul : in Boolean := True); Terminator_Error : exception; end Interfaces.C; Each of the types declared in Interfaces.C is C-compatible. The types int, short, long, unsigned, ptrdiff_t, size_t, double, char, wchar_t, char16_t, and char32_t correspond respectively to the C types having the same names. The types signed_char, unsigned_short, unsigned_long, unsigned_char, C_float, and long_double correspond respectively to the C types signed char, unsigned short, unsigned long, unsigned char, float, and long double. The type of the subtype plain_char is either signed_char or unsigned_char, depending on the C implementation. function To_C (Item : in Character) return char; function To_Ada (Item : in char ) return Character; The functions To_C and To_Ada map between the Ada type Character and the C type char. function Is_Nul_Terminated (Item : in char_array) return Boolean; The result of Is_Nul_Terminated is True if Item contains nul, and is False otherwise. function To_C (Item : in String; Append_Nul : in Boolean := True) return char_array; function To_Ada (Item : in char_array; Trim_Nul : in Boolean := True) return String; The result of To_C is a char_array value of length Item'Length (if Append_Nul is False) or Item'Length+1 (if Append_Nul is True). The lower bound is 0. For each component Item(I), the corresponding component in the result is To_C applied to Item(I). The value nul is appended if Append_Nul is True. If Append_Nul is False and Item'Length is 0, then To_C propagates Constraint_Error. The result of To_Ada is a String whose length is Item'Length (if Trim_Nul is False) or the length of the slice of Item preceding the first nul (if Trim_Nul is True). The lower bound of the result is 1. If Trim_Nul is False, then for each component Item(I) the corresponding component in the result is To_Ada applied to Item(I). If Trim_Nul is True, then for each component Item(I) before the first nul the corresponding component in the result is To_Ada applied to Item(I). The function propagates Terminator_Error if Trim_Nul is True and Item does not contain nul. B.3 Interfacing with C and C++ 13 December 2012 586 Ada Reference Manual — 2012 Edition procedure To_C (Item : in String; Target : out char_array; Count : out size_t; Append_Nul : in Boolean := True); procedure To_Ada (Item : in char_array; Target : out String; Count : out Natural; Trim_Nul : in Boolean := True); For procedure To_C, each element of Item is converted (via the To_C function) to a char, which is assigned to the corresponding element of Target. If Append_Nul is True, nul is then assigned to the next element of Target. In either case, Count is set to the number of Target elements assigned. If Target is not long enough, Constraint_Error is propagated. For procedure To_Ada, each element of Item (if Trim_Nul is False) or each element of Item preceding the first nul (if Trim_Nul is True) is converted (via the To_Ada function) to a Character, which is assigned to the corresponding element of Target. Count is set to the number of Target elements assigned. If Target is not long enough, Constraint_Error is propagated. If Trim_Nul is True and Item does not contain nul, then Terminator_Error is propagated. function Is_Nul_Terminated (Item : in wchar_array) return Boolean; The result of Is_Nul_Terminated is True if Item contains wide_nul, and is False otherwise. function To_C (Item : in Wide_Character) return wchar_t; function To_Ada (Item : in wchar_t ) return Wide_Character; To_C and To_Ada provide the mappings between the Ada and C wide character types. function To_C (Item : in Wide_String; Append_Nul : in Boolean := True) return wchar_array; function To_Ada (Item : in wchar_array; Trim_Nul : in Boolean := True) return Wide_String; procedure To_C (Item : in Wide_String; Target : out wchar_array; Count : out size_t; Append_Nul : in Boolean := True); procedure To_Ada (Item : in wchar_array; Target : out Wide_String; Count : out Natural; Trim_Nul : in Boolean := True); 52 53 54 55 56 57 58 59 The To_C and To_Ada subprograms that convert between Wide_String and wchar_array have analogous effects to the To_C and To_Ada subprograms that convert between String and char_array, except that wide_nul is used instead of nul. 60 function Is_Nul_Terminated (Item : in char16_array) return Boolean; The result of Is_Nul_Terminated is True if Item contains char16_nul, and is False otherwise. function To_C (Item : in Wide_Character) return char16_t; function To_Ada (Item : in char16_t ) return Wide_Character; To_C and To_Ada provide mappings between the Ada and C 16-bit character types. 60.1/2 60.2/2 60.3/2 60.4/2 587 13 December 2012 Interfacing with C and C++ B.3 Ada Reference Manual — 2012 Edition 60.5/2 function To_C (Item : in Wide_String; Append_Nul : in Boolean := True) return char16_array; function To_Ada (Item : in char16_array; Trim_Nul : in Boolean := True) return Wide_String; procedure To_C (Item : in Wide_String; Target : out char16_array; Count : out size_t; Append_Nul : in Boolean := True); procedure To_Ada (Item : in char16_array; Target : out Wide_String; Count : out Natural; Trim_Nul : in Boolean := True); 60.6/2 60.7/2 60.8/2 60.9/2 60.10/2 60.11/2 The To_C and To_Ada subprograms that convert between Wide_String and char16_array have analogous effects to the To_C and To_Ada subprograms that convert between String and char_array, except that char16_nul is used instead of nul. function Is_Nul_Terminated (Item : in char32_array) return Boolean; The result of Is_Nul_Terminated is True if Item contains char16_nul, and is False otherwise. function To_C (Item : in Wide_Wide_Character) return char32_t; function To_Ada (Item : in char32_t ) return Wide_Wide_Character; To_C and To_Ada provide mappings between the Ada and C 32-bit character types. function To_C (Item : in Wide_Wide_String; Append_Nul : in Boolean := True) return char32_array; function To_Ada (Item : in char32_array; Trim_Nul : in Boolean := True) return Wide_Wide_String; procedure To_C (Item : in Wide_Wide_String; Target : out char32_array; Count : out size_t; Append_Nul : in Boolean := True); procedure To_Ada (Item : in char32_array; Target : out Wide_Wide_String; Count : out Natural; Trim_Nul : in Boolean := True); 60.12/2 The To_C and To_Ada subprograms that convert between Wide_Wide_String and char32_array have analogous effects to the To_C and To_Ada subprograms that convert between String and char_array, except that char32_nul is used instead of nul. 60.13/3 The Convention aspect with convention_identifier C_Pass_By_Copy shall only be specified for a type. 60.14/2 The eligibility rules in B.1 do not apply to convention C_Pass_By_Copy. Instead, a type T is eligible for convention C_Pass_By_Copy if T is an unchecked union type or if T is a record type that has no discriminants and that only has components with statically constrained subtypes, and each component is C-compatible. 60.15/3 If a type is C_Pass_By_Copy-compatible, then it is also C-compatible. B.3 Interfacing with C and C++ 13 December 2012 588 Ada Reference Manual — 2012 Edition An implementation shall support specifying aspect Convention with a C convention_identifier for a C- eligible type (see B.1). An implementation shall support specifying aspect Convention with a C_Pass_By_Copy convention_identifier for a C_Pass_By_Copy-eligible type. 61/3 Implementation Requirements An implementation may provide additional declarations in the C interface packages. Implementation Permissions An implementation need not support specifying the Convention aspect with convention_identifier C in the following cases: • for a subprogram that has a parameter of an unconstrained array subtype, unless the Import aspect has the value True for the subprogram; • for a function with an unconstrained array result subtype; • for an object whose nominal subtype is an unconstrained array subtype. Implementation Advice The constants nul, wide_nul, char16_nul, and char32_nul should have a representation of zero. An implementation should support the following interface correspondences between Ada and C. • An Ada procedure corresponds to a void-returning C function. • An Ada function corresponds to a non-void C function. • An Ada in scalar parameter is passed as a scalar argument to a C function. • An Ada in parameter of an access-to-object type with designated type T is passed as a t* argument to a C function, where t is the C type corresponding to the Ada type T. • An Ada access T parameter, or an Ada out or in out parameter of an elementary type T, is passed as a t* argument to a C function, where t is the C type corresponding to the Ada type T. In the case of an elementary out or in out parameter, a pointer to a temporary copy is used to preserve by-copy semantics. 62 62.1/3 62.2/3 62.3/3 62.4/3 62.5/3 63 64 65 66 67 68 • An Ada parameter of a (record) type T of convention C_Pass_By_Copy, of mode in, is passed as 68.1/2 a t argument to a C function, where t is the C struct corresponding to the Ada type T. • An Ada parameter of a record type T, of any mode, other than an in parameter of a type of convention C_Pass_By_Copy, is passed as a t* argument to a C function, where t is the C struct corresponding to the Ada type T. • An Ada parameter of an array type with component type T, of any mode, is passed as a t* argument to a C function, where t is the C type corresponding to the Ada type T. • An Ada parameter of an access-to-subprogram type is passed as a pointer to a C function whose prototype corresponds to the designated subprogram's specification. • An Ada parameter of a private type is passed as specified for the full view of the type. • The rules of correspondence given above for parameters of mode in also apply to the return object of a function. This paragraph was deleted. NOTES 6 Values of type char_array are not implicitly terminated with nul. If a char_array is to be passed as a parameter to an imported C function requiring nul termination, it is the programmer's responsibility to obtain this effect. 69/2 70 71 71.1/3 71.2/3 71.3/3 72 589 13 December 2012 Interfacing with C and C++ B.3 Ada Reference Manual — 2012 Edition 7 To obtain the effect of C's sizeof(item_type), where Item_Type is the corresponding Ada type, evaluate the expression: size_t(Item_Type'Size/CHAR_BIT). This paragraph was deleted. 8 A C function that takes a variable number of arguments can correspond to several Ada subprograms, taking various specific numbers and types of parameters. Examples Example of using the Interfaces.C package: --Calling the C Library Function strcpy with Interfaces.C; procedure Test is package C renames Interfaces.C; use type C.char_array; -- Call strcpy: -- C definition of strcpy: char *strcpy(char *s1, const char *s2); -- This function copies the string pointed to by s2 (including the terminating null character) -- into the array pointed to by s1. If copying takes place between objects that overlap, -- the behavior is undefined. The strcpy function returns the value of s1. -- Note: since the C function's return value is of no interest, the Ada interface is a procedure procedure Strcpy (Target : out C.char_array; Source : in C.char_array) with Import => True, Convention => C, External_Name => "strcpy"; This paragraph was deleted. Chars1 : C.char_array(1..20); Chars2 : C.char_array(1..20); begin Chars2(1..6) := "qwert" & C.nul; Strcpy(Chars1, Chars2); -- Now Chars1(1..6) = "qwert" & C.Nul end Test; 73 74/2 75 76 77 78/3 79/3 80 81 82 83 84 B.3 Interfacing with C and C++ 13 December 2012 590 Ada Reference Manual — 2012 Edition B.3.1 The Package Interfaces.C.Strings The package Interfaces.C.Strings declares types and subprograms allowing an Ada program to allocate, reference, update, and free C-style strings. In particular, the private type chars_ptr corresponds to a common use of “char *” in C programs, and an object of this type can be passed to a subprogram to which with Import => True, Convention => C has been specified, and for which “char *” is the type of the argument of the C function. The library package Interfaces.C.Strings has the following declaration: Static Semantics package Interfaces.C.Strings is pragma Preelaborate(Strings); type char_array_access is access all char_array; type chars_ptr is private; pragma Preelaborable_Initialization(chars_ptr); type chars_ptr_array is array (size_t range <>) of aliased chars_ptr; Null_Ptr : constant chars_ptr; function To_Chars_Ptr (Item : in char_array_access; Nul_Check : in Boolean := False) return chars_ptr; function New_Char_Array (Chars : in char_array) return chars_ptr; function New_String (Str : in String) return chars_ptr; procedure Free (Item : in out chars_ptr); Dereference_Error : exception; function Value (Item : in chars_ptr) return char_array; function Value (Item : in chars_ptr; Length : in size_t) return char_array; function Value (Item : in chars_ptr) return String; function Value (Item : in chars_ptr; Length : in size_t) return String; function Strlen (Item : in chars_ptr) return size_t; procedure Update (Item : in chars_ptr; Offset : in size_t; Chars : in char_array; Check : in Boolean := True); procedure Update (Item : in chars_ptr; Offset : in size_t; Str : in String; Check : in Boolean := True); Update_Error : exception; private ... -- not specified by the language end Interfaces.C.Strings; The type chars_ptr is C-compatible and corresponds to the use of C's “char *” for a pointer to the first char in a char array terminated by nul. When an object of type chars_ptr is declared, its value is by default set to Null_Ptr, unless the object is imported (see B.1). 1/3 2 3 4 5/2 6/2 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 591 13 December 2012 The Package Interfaces.C.Strings B.3.1 Ada Reference Manual — 2012 Edition function To_Chars_Ptr (Item : in char_array_access; Nul_Check : in Boolean := False) return chars_ptr; If Item is null, then To_Chars_Ptr returns Null_Ptr. If Item is not null, Nul_Check is True, and Item.all does not contain nul, then the function propagates Terminator_Error; otherwise, To_Chars_Ptr performs a pointer conversion with no allocation of memory. function New_Char_Array (Chars : in char_array) return chars_ptr; This function returns a pointer to an allocated object initialized to Chars(Chars'First .. Index) & nul, where • Index = Chars'Last if Chars does not contain nul, or • Index is the smallest size_t value I such that Chars(I+1) = nul. Storage_Error is propagated if the allocation fails. function New_String (Str : in String) return chars_ptr; This function is equivalent to New_Char_Array(To_C(Str)). procedure Free (Item : in out chars_ptr); If Item is Null_Ptr, then Free has no effect. Otherwise, Free releases the storage occupied by Value(Item), and resets Item to Null_Ptr. function Value (Item : in chars_ptr) return char_array; If Item = Null_Ptr, then Value propagates Dereference_Error. Otherwise, Value returns the prefix of the array of chars pointed to by Item, up to and including the first nul. The lower bound of the result is 0. If Item does not point to a nul-terminated string, then execution of Value is erroneous. function Value (Item : in chars_ptr; Length : in size_t) return char_array; If Item = Null_Ptr, then Value propagates Dereference_Error. Otherwise, Value returns the shorter of two arrays, either the first Length chars pointed to by Item, or Value(Item). The lower bound of the result is 0. If Length is 0, then Value propagates Constraint_Error. function Value (Item : in chars_ptr) return String; Equivalent to To_Ada(Value(Item), Trim_Nul=>True). function Value (Item : in chars_ptr; Length : in size_t) return String; Equivalent to To_Ada(Value(Item, Length) & nul, Trim_Nul=>True). function Strlen (Item : in chars_ptr) return size_t; Returns Val'Length–1 where Val = Value(Item); propagates Dereference_Error if Item = Null_Ptr. procedure Update (Item : in chars_ptr; Offset : in size_t; Chars : in char_array; Check : Boolean := True); If Item = Null_Ptr, then Update propagates Dereference_Error. Otherwise, this procedure updates the value pointed to by Item, starting at position Offset, using Chars as the data to be 23 24/3 25 26 27 28 28.1 29 30 31 32 33 34/3 35 36/3 37 38 39 40/1 41 42 43 44/1 B.3.1 The Package Interfaces.C.Strings 13 December 2012 592 Ada Reference Manual — 2012 Edition copied into the array. Overwriting the nul terminator, and skipping with the Offset past the nul terminator, are both prevented if Check is True, as follows: • Let N = Strlen(Item). If Check is True, then: • If Offset+Chars'Length>N, propagate Update_Error. • Otherwise, overwrite the data in the array pointed to by Item, starting at the char at position Offset, with the data in Chars. • If Check is False, then processing is as above, but with no check that Offset+Chars'Length>N. procedure Update (Item : in chars_ptr; Offset : in size_t; Str : in String; Check : in Boolean := True); 45 46 47 48 49 Equivalent to Update(Item, Offset, To_C(Str, Append_Nul => False), Check). 50/2 51 52 53 54 55 56 57 58 59 60 Execution of any of the following is erroneous if the Item parameter is not null_ptr and Item does not point to a nul-terminated array of chars. Erroneous Execution • a Value function not taking a Length parameter, • • the Strlen function. the Free procedure, Execution of Free(X) is also erroneous if the chars_ptr X was not returned by New_Char_Array or New_String. Reading or updating a freed char_array is erroneous. Execution of Update is erroneous if Check is False and a call with Check equal to True would have propagated Update_Error. NOTES 9 New_Char_Array and New_String might be implemented either through the allocation function from the C environment (“malloc”) or through Ada dynamic memory allocation (“new”). The key points are • • the returned value (a chars_ptr) is represented as a C “char *” so that it may be passed to C functions; the allocated object should be freed by the programmer via a call of Free, not by a called C function. 593 13 December 2012 The Package Interfaces.C.Strings B.3.1 Ada Reference Manual — 2012 Edition B.3.2 The Generic Package Interfaces.C.Pointers The generic package Interfaces.C.Pointers allows the Ada programmer to perform C-style operations on pointers. It includes an access type Pointer, Value functions that dereference a Pointer and deliver the designated array, several pointer arithmetic operations, and “copy” procedures that copy the contents of a source pointer into the array designated by a destination pointer. As in C, it treats an object Ptr of type Pointer as a pointer to the first element of an array, so that for example, adding 1 to Ptr yields a pointer to the second element of the array. The generic allows two styles of usage: one in which the array is terminated by a special terminator element; and another in which the programmer needs to keep track of the length. The generic library package Interfaces.C.Pointers has the following declaration: Static Semantics generic type Index is (<>); type Element is private; type Element_Array is array (Index range <>) of aliased Element; Default_Terminator : Element; package Interfaces.C.Pointers is pragma Preelaborate(Pointers); type Pointer is access all Element; function Value(Ref : in Pointer; Terminator : in Element := Default_Terminator) return Element_Array; function Value(Ref : in Pointer; Length : in ptrdiff_t) return Element_Array; Pointer_Error : exception; -- C-style Pointer arithmetic function "+" (Left : in Pointer; Right : in ptrdiff_t) return Pointer with Convention => Intrinsic; function "+" (Left : in ptrdiff_t; Right : in Pointer) return Pointer with Convention => Intrinsic; function "-" (Left : in Pointer; Right : in ptrdiff_t) return Pointer with Convention => Intrinsic; function "-" (Left : in Pointer; Right : in Pointer) return ptrdiff_t with Convention => Intrinsic; procedure Increment (Ref : in out Pointer) with Convention => Intrinsic; procedure Decrement (Ref : in out Pointer) with Convention => Intrinsic; This paragraph was deleted. function Virtual_Length (Ref : in Pointer; Terminator : in Element := Default_Terminator) return ptrdiff_t; procedure Copy_Terminated_Array (Source : in Pointer; Target : in Pointer; Limit : in ptrdiff_t := ptrdiff_t'Last; Terminator : in Element := Default_Terminator); procedure Copy_Array (Source : in Pointer; Target : in Pointer; Length : in ptrdiff_t); end Interfaces.C.Pointers; 1 2 3 4 5 6 7 8 9 10/3 11/3 12/3 13 14 15 16 B.3.2 The Generic Package Interfaces.C.Pointers 13 December 2012 594 Ada Reference Manual — 2012 Edition The type Pointer is C-compatible and corresponds to one use of C's “Element *”. An object of type Pointer is interpreted as a pointer to the initial Element in an Element_Array. Two styles are supported: • Explicit termination of an array value with Default_Terminator (a special terminator value); • Programmer-managed length, with Default_Terminator treated simply as a data element. function Value(Ref : in Pointer; Terminator : in Element := Default_Terminator) return Element_Array; This function returns an Element_Array whose value is the array pointed to by Ref, up to and including Index'First. Interfaces.C.Strings.Dereference_Error is propagated if Ref is null. lower bound of first Terminator; the array the the is function Value(Ref : in Pointer; Length : in ptrdiff_t) return Element_Array; This function returns an Element_Array comprising the first Length elements pointed to by Ref. The exception Interfaces.C.Strings.Dereference_Error is propagated if Ref is null. The "+" and "–" functions perform arithmetic on Pointer values, based on the Size of the array elements. In each of these functions, Pointer_Error is propagated if a Pointer parameter is null. procedure Increment (Ref : in out Pointer); Equivalent to Ref := Ref+1. procedure Decrement (Ref : in out Pointer); Equivalent to Ref := Ref–1. function Virtual_Length (Ref : in Pointer; Terminator : in Element := Default_Terminator) return ptrdiff_t; Returns the number of Elements, up to the one just before the first Terminator, in Value(Ref, Terminator). procedure Copy_Terminated_Array (Source : in Pointer; Target : in Pointer; Limit : in ptrdiff_t := ptrdiff_t'Last; Terminator : in Element := Default_Terminator); This procedure copies Value(Source, Terminator) into the array pointed to by Target; it stops either after Terminator has been copied, or the number of elements copied is Limit, whichever occurs first. Dereference_Error is propagated if either Source or Target is null. procedure Copy_Array (Source : in Pointer; Target : in Pointer; Length : in ptrdiff_t); This procedure copies the first Length elements from the array pointed to by Source, into the array pointed to by Target. Dereference_Error is propagated if either Source or Target is null. It is erroneous to dereference a Pointer that does not designate an aliased Element. Erroneous Execution Execution of Value(Ref, Terminator) is erroneous if Ref does not designate an aliased Element in an Element_Array terminated by Terminator. 595 13 December 2012 The Generic Package Interfaces.C.Pointers B.3.2 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49/1 Ada Reference Manual — 2012 Edition Execution of Value(Ref, Length) is erroneous if Ref does not designate an aliased Element in an Element_Array containing at least Length Elements between the designated Element and the end of the array, inclusive. Execution of Virtual_Length(Ref, Terminator) is erroneous if Ref does not designate an aliased Element in an Element_Array terminated by Terminator. Execution of Copy_Terminated_Array(Source, Target, Limit, Terminator) is erroneous in either of the following situations: • Execution of both Value(Source, Terminator) and Value(Source, Limit) are erroneous, or • Copying writes past the end of the array containing the Element designated by Target. Execution of Copy_Array(Source, Target, Length) is erroneous if either Value(Source, Length) is erroneous, or copying writes past the end of the array containing the Element designated by Target. NOTES 10 To compose a Pointer from an Element_Array, use 'Access on the first element. For example (assuming appropriate instantiations): Some_Array : Element_Array(0..5) ; Some_Pointer : Pointer := Some_Array(0)'Access; Example of Interfaces.C.Pointers: Examples with Interfaces.C.Pointers; with Interfaces.C.Strings; procedure Test_Pointers is package C renames Interfaces.C; package Char_Ptrs is new C.Pointers (Index => C.size_t, Element => C.char, Element_Array => C.char_array, Default_Terminator => C.nul); use type Char_Ptrs.Pointer; subtype Char_Star is Char_Ptrs.Pointer; procedure Strcpy (Target_Ptr, Source_Ptr : Char_Star) is Target_Temp_Ptr : Char_Star := Target_Ptr; Source_Temp_Ptr : Char_Star := Source_Ptr; Element : C.char; begin if Target_Temp_Ptr = null or Source_Temp_Ptr = null then raise C.Strings.Dereference_Error; end if; loop Element := Source_Temp_Ptr.all; Target_Temp_Ptr.all := Element; exit when C."="(Element, C.nul); Char_Ptrs.Increment(Target_Temp_Ptr); Char_Ptrs.Increment(Source_Temp_Ptr); end loop; end Strcpy; begin ... end Test_Pointers; B.3.2 The Generic Package Interfaces.C.Pointers 13 December 2012 596 Ada Reference Manual — 2012 Edition B.3.3 Unchecked Union Types Specifying aspect Unchecked_Union to have the value True defines an interface correspondence between a given discriminated type and some C union. The aspect requires that the associated type shall be given a representation that allocates no space for its discriminant(s). 1/3 Paragraphs 2 through 3 were moved to Annex J, “Obsolescent Features”. For a discriminated record type having a variant_part, the following language-defined representation aspect may be specified: Static Semantics Unchecked_Union The the aspect_definition shall be a static expression. If not specified (including by inheritance), the aspect is False. type of aspect Unchecked_Union If directly specified, is Boolean. Paragraphs 4 and 5 were deleted. Legality Rules A type for which aspect Unchecked_Union is True is called an unchecked union type. A subtype of an unchecked union type is defined to be an unchecked union subtype. An object of an unchecked union type is defined to be an unchecked union object. All component subtypes of an unchecked union type shall be C-compatible. If a component subtype of an unchecked union type is subject to a per-object constraint, then the component subtype shall be an unchecked union subtype. Any name that denotes a discriminant of an object of an unchecked union type shall occur within the declarative region of the type, and shall not occur within a record_representation_clause. The type of a component declared in a variant_part of an unchecked union type shall not need finalization. In addition to the places where Legality Rules normally apply (see 12.3), this rule also applies in the private part of an instance of a generic unit. For an unchecked union type declared within the body of a generic unit, or within the body of any of its descendant library units, no part of the type of a component declared in a variant_part of the unchecked union type shall be of a formal private type or formal private extension declared within the formal part of the generic unit. The completion of an incomplete or private type declaration having a known_discriminant_part shall not be an unchecked union type. An unchecked union subtype shall only be passed as a generic actual parameter if the corresponding formal type has no known discriminants or is an unchecked union type. An unchecked union type is eligible for convention C. All objects of an unchecked union type have the same size. Static Semantics Discriminants of objects of an unchecked union type are of size zero. 597 13 December 2012 Unchecked Union Types B.3.3 3.1/3 3.2/3 6/3 7/2 8/2 9/3 10/3 11/2 12/2 13/2 14/2 15/2 Ada Reference Manual — 2012 Edition 16/2 17/2 18/2 Any check which would require reading a discriminant of an unchecked union object is suppressed (see 11.5). These checks include: • The check performed when addressing a variant component (i.e., a component that was declared in a variant part) of an unchecked union object that the object has this component (see 4.1.3). • Any checks associated with a type or subtype conversion of a value of an unchecked union type (see 4.6). This includes, for example, the check associated with the implicit subtype conversion of an assignment statement. 19/2 • The subtype membership check associated with the evaluation of a qualified expression (see 4.7) or an uninitialized allocator (see 4.8). Dynamic Semantics 20/2 21/2 22/2 23/2 A view of an unchecked union object (including a type conversion or function call) has inferable discriminants if it has a constrained nominal subtype, unless the object is a component of an enclosing unchecked union object that is subject to a per-object constraint and the enclosing object lacks inferable discriminants. An expression of an unchecked union type has inferable discriminants if it is either a name of an object with inferable discriminants or a qualified expression whose subtype_mark denotes a constrained subtype. Program_Error is raised in the following cases: • Evaluation of the predefined equality operator for an unchecked union type if either of the operands lacks inferable discriminants. 24/2 • Evaluation of the predefined equality operator for a type which has a subcomponent of an unchecked union type whose nominal subtype is unconstrained. 25/2 • Evaluation of a membership test if the subtype_mark denotes a constrained unchecked union subtype and the expression lacks inferable discriminants. 26/2 • Conversion from a derived unchecked union type to an unconstrained non-unchecked-union type if the operand of the conversion lacks inferable discriminants. 27/2 • Execution of the default implementation of the Write or Read attribute of an unchecked union type. 28/2 • Execution of the default implementation of the Output or Input attribute of an unchecked union type if the type lacks default discriminant values. Paragraph 29 was deleted. 30/2 31/3 32/2 NOTES 11 The use of an unchecked union to obtain the effect of an unchecked conversion results in erroneous execution (see 11.5). Execution of the following example is erroneous even if Float'Size = Integer'Size: type T (Flag : Boolean := False) is record case Flag is when False => F1 : Float := 0.0; when True => F2 : Integer := 0; end case; end record with Unchecked_Union; X : T; Y : Integer := X.F2; -- erroneous B.3.3 Unchecked Union Types 13 December 2012 598 Ada Reference Manual — 2012 Edition B.4 Interfacing with COBOL The facilities relevant to interfacing with the COBOL language are the package Interfaces.COBOL and support for specifying the Convention aspect with convention_identifier COBOL. 1/3 The COBOL interface package supplies several sets of facilities: • A set of types corresponding to the native COBOL types of the supported COBOL implementation (so-called “internal COBOL representations”), allowing Ada data to be passed as parameters to COBOL programs • A set of types and constants reflecting external data representations such as might be found in files or databases, allowing COBOL-generated data to be read by an Ada program, and Ada- generated data to be read by COBOL programs • A generic package for converting between an Ada decimal type value and either an internal or external COBOL representation The library package Interfaces.COBOL has the following declaration: Static Semantics package Interfaces.COBOL is pragma Preelaborate(COBOL); -- Types and operations for internal data representations type Floating is digits implementation-defined; type Long_Floating is digits implementation-defined; type Binary is range implementation-defined; type Long_Binary is range implementation-defined; Max_Digits_Binary : constant := implementation-defined; Max_Digits_Long_Binary : constant := implementation-defined; type Decimal_Element is mod implementation-defined; type Packed_Decimal is array (Positive range <>) of Decimal_Element with Pack; type COBOL_Character is implementation-defined character type; Ada_To_COBOL : array (Character) of COBOL_Character := implementation-defined; COBOL_To_Ada : array (COBOL_Character) of Character := implementation-defined; type Alphanumeric is array (Positive range <>) of COBOL_Character with Pack; function To_COBOL (Item : in String) return Alphanumeric; function To_Ada (Item : in Alphanumeric) return String; procedure To_COBOL (Item : in String; Target : out Alphanumeric; Last : out Natural); procedure To_Ada (Item : in Alphanumeric; Target : out String; Last : out Natural); type Numeric is array (Positive range <>) of COBOL_Character with Pack; -- Formats for COBOL data representations type Display_Format is private; Unsigned : constant Display_Format; Leading_Separate : constant Display_Format; Trailing_Separate : constant Display_Format; Leading_Nonseparate : constant Display_Format; Trailing_Nonseparate : constant Display_Format; 2 3 4 5 6 7 8 9 10 11 12/3 13 14 15 16/3 17 18 19 20/3 21 22 23 599 13 December 2012 Interfacing with COBOL B.4 Ada Reference Manual — 2012 Edition 24 25 26 27 28 29/3 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 type Binary_Format is private; High_Order_First : constant Binary_Format; Low_Order_First : constant Binary_Format; Native_Binary : constant Binary_Format; type Packed_Format is private; Packed_Unsigned : constant Packed_Format; Packed_Signed : constant Packed_Format; -- Types for external representation of COBOL binary data type Byte is mod 2**COBOL_Character'Size; type Byte_Array is array (Positive range <>) of Byte with Pack; Conversion_Error : exception; generic type Num is delta <> digits <>; package Decimal_Conversions is -- Display Formats: data values are represented as Numeric function Valid (Item : in Numeric; Format : in Display_Format) return Boolean; function Length (Format : in Display_Format) return Natural; function To_Decimal (Item : in Numeric; Format : in Display_Format) return Num; function To_Display (Item : in Num; Format : in Display_Format) return Numeric; -- Packed Formats: data values are represented as Packed_Decimal function Valid (Item : in Packed_Decimal; Format : in Packed_Format) return Boolean; function Length (Format : in Packed_Format) return Natural; function To_Decimal (Item : in Packed_Decimal; Format : in Packed_Format) return Num; function To_Packed (Item : in Num; Format : in Packed_Format) return Packed_Decimal; -- Binary Formats: external data values are represented as Byte_Array function Valid (Item : in Byte_Array; Format : in Binary_Format) return Boolean; function Length (Format : in Binary_Format) return Natural; function To_Decimal (Item : in Byte_Array; Format : in Binary_Format) return Num; function To_Binary (Item : in Num; Format : in Binary_Format) return Byte_Array; -- Internal Binary formats: data values are of type Binary or Long_Binary function To_Decimal (Item : in Binary) return Num; function To_Decimal (Item : in Long_Binary) return Num; function To_Binary (Item : in Num) return Binary; function To_Long_Binary (Item : in Num) return Long_Binary; end Decimal_Conversions; private ... -- not specified by the language end Interfaces.COBOL; Each of the types in Interfaces.COBOL is COBOL-compatible. The types Floating and Long_Floating correspond to the native types in COBOL for data items with computational usage implemented by floating point. The types Binary and Long_Binary correspond to the B.4 Interfacing with COBOL 13 December 2012 600 Ada Reference Manual — 2012 Edition native types in COBOL for data items with binary usage, or with computational usage implemented by binary. Max_Digits_Binary is the largest number of decimal digits in a numeric value that is represented as Binary. Max_Digits_Long_Binary is the largest number of decimal digits in a numeric value that is represented as Long_Binary. The type Packed_Decimal corresponds to COBOL's packed-decimal usage. The type COBOL_Character defines the run-time character set used in the COBOL implementation. Ada_To_COBOL and COBOL_To_Ada are the mappings between the Ada and COBOL run-time character sets. Type Alphanumeric corresponds to COBOL's alphanumeric data category. Each of the functions To_COBOL and To_Ada converts its parameter based on the mappings Ada_To_COBOL and COBOL_To_Ada, respectively. The length of the result for each is the length of the parameter, and the lower bound of the result is 1. Each component of the result is obtained by applying the relevant mapping to the corresponding component of the parameter. Each of the procedures To_COBOL and To_Ada copies converted elements from Item to Target, using the appropriate mapping (Ada_To_COBOL or COBOL_To_Ada, respectively). The index in Target of the last element assigned is returned in Last (0 if Item is a null array). If Item'Length exceeds Target'Length, Constraint_Error is propagated. Type Numeric corresponds to COBOL's numeric data category with display usage. The types Display_Format, Binary_Format, and Packed_Format are used in conversions between Ada decimal type values and COBOL internal or external data representations. The value of the constant Native_Binary is either High_Order_First or Low_Order_First, depending on the implementation. function Valid (Item : in Numeric; Format : in Display_Format) return Boolean; The function Valid checks that the Item parameter has a value consistent with the value of Format. If the value of Format is other than Unsigned, Leading_Separate, and Trailing_Separate, the effect is implementation defined. If Format does have one of these values, the following rules apply: • Format=Unsigned: if Item comprises one or more decimal digit characters, then Valid returns True, else it returns False. • Format=Leading_Separate: if Item comprises a single occurrence of the plus or minus sign character, and then one or more decimal digit characters, then Valid returns True, else it returns False. • Format=Trailing_Separate: if Item comprises one or more decimal digit characters and finally a plus or minus sign character, then Valid returns True, else it returns False. function Length (Format : in Display_Format) return Natural; The Length function returns the minimal length of a Numeric value sufficient to hold any value of type Num when represented as Format. 53 54 55 56 57 58 59 60 61 62 63/3 64/1 65/1 66 67 601 13 December 2012 Interfacing with COBOL B.4 Ada Reference Manual — 2012 Edition 68 69 70 71/1 72 73 74 75 76 77 78 79/1 80 81 82 83 84 85 86 87/1 function To_Decimal (Item : in Numeric; Format : in Display_Format) return Num; Produces a value of type Num corresponding to Item as represented by Format. The number of digits after the assumed radix point in Item is Num'Scale. Conversion_Error is propagated if the value represented by Item is outside the range of Num. function To_Display (Item : in Num; Format : in Display_Format) return Numeric; This function returns the Numeric value for Item, represented in accordance with Format. The length of the returned value is Length(Format), and the lower bound is 1. Conversion_Error is propagated if Num is negative and Format is Unsigned. function Valid (Item : in Packed_Decimal; Format : in Packed_Format) return Boolean; This function returns True if Item has a value consistent with Format, and False otherwise. The rules for the formation of Packed_Decimal values are implementation defined. function Length (Format : in Packed_Format) return Natural; This function returns the minimal length of a Packed_Decimal value sufficient to hold any value of type Num when represented as Format. function To_Decimal (Item : in Packed_Decimal; Format : in Packed_Format) return Num; Produces a value of type Num corresponding to Item as represented by Format. Num'Scale is the number of digits after the assumed radix point in Item. Conversion_Error is propagated if the value represented by Item is outside the range of Num. function To_Packed (Item : in Num; Format : in Packed_Format) return Packed_Decimal; This function returns the Packed_Decimal value for Item, represented in accordance with Format. The length of the returned value is Length(Format), and the lower bound is 1. Conversion_Error is propagated if Num is negative and Format is Packed_Unsigned. function Valid (Item : in Byte_Array; Format : in Binary_Format) return Boolean; This function returns True if Item has a value consistent with Format, and False otherwise. function Length (Format : in Binary_Format) return Natural; This function returns the minimal length of a Byte_Array value sufficient to hold any value of type Num when represented as Format. function To_Decimal (Item : in Byte_Array; Format : in Binary_Format) return Num; Produces a value of type Num corresponding to Item as represented by Format. Num'Scale is the number of digits after the assumed radix point in Item. Conversion_Error is propagated if the value represented by Item is outside the range of Num. function To_Binary (Item : in Num; Format : in Binary_Format) return Byte_Array; This function returns the Byte_Array value for Item, represented in accordance with Format. The length of the returned value is Length(Format), and the lower bound is 1. B.4 Interfacing with COBOL 13 December 2012 602 Ada Reference Manual — 2012 Edition function To_Decimal (Item : in Binary) return Num; function To_Decimal (Item : in Long_Binary) return Num; These functions convert from COBOL binary format to a corresponding value of the decimal type Num. Conversion_Error is propagated if Item is too large for Num. function To_Binary (Item : in Num) return Binary; function To_Long_Binary (Item : in Num) return Long_Binary; These functions convert from Ada decimal to COBOL binary format. Conversion_Error is propagated if the value of Item is too large to be represented in the result type. 88 89 90 91 An implementation shall support specifying aspect Convention with a COBOL convention_identifier for a COBOL-eligible type (see B.1). 92/3 Implementation Requirements Implementation Permissions An implementation may provide additional constants of the private types Display_Format, Binary_Format, or Packed_Format. An implementation may provide further floating point and integer types in Interfaces.COBOL to match additional native COBOL types, and may also supply corresponding conversion functions in the generic package Decimal_Conversions. Implementation Advice An Ada implementation should support the following interface correspondences between Ada and COBOL. • An Ada access T parameter is passed as a “BY REFERENCE” data item of the COBOL type corresponding to T. • An Ada in scalar parameter is passed as a “BY CONTENT” data item of the corresponding COBOL type. • Any other Ada parameter is passed as a “BY REFERENCE” data item of the COBOL type corresponding to the Ada parameter type; for scalars, a local copy is used if necessary to ensure by-copy semantics. NOTES 12 An implementation is not required to support specifying aspect Convention for access types, nor is it required to support specifying aspects Import, Export, or Convention for functions. 13 If an Ada subprogram is exported to COBOL, then a call from COBOL call may specify either “BY CONTENT” or “BY REFERENCE”. 93 94 95 96 97 98 99/3 100 603 13 December 2012 Interfacing with COBOL B.4 101 102 103 104 105 106/3 107/3 108 109 110 111 112 113 114 115/3 Ada Reference Manual — 2012 Edition Examples of Interfaces.COBOL: Examples with Interfaces.COBOL; procedure Test_Call is -- Calling a foreign COBOL program -- Assume that a COBOL program PROG has the following declaration -- in its LINKAGE section: -- 01 Parameter-Area -- 05 NAME PIC X(20). -- 05 SSN PIC X(9). -- 05 SALARY PIC 99999V99 USAGE COMP. -- The effect of PROG is to update SALARY based on some algorithm package COBOL renames Interfaces.COBOL; type Salary_Type is delta 0.01 digits 7; type COBOL_Record is record Name : COBOL.Numeric(1..20); SSN : COBOL.Numeric(1..9); Salary : COBOL.Binary; -- Assume Binary = 32 bits end record with Convention => COBOL; procedure Prog (Item : in out COBOL_Record) with Import => True, Convention => COBOL; package Salary_Conversions is new COBOL.Decimal_Conversions(Salary_Type); Some_Salary : Salary_Type := 12_345.67; Some_Record : COBOL_Record := (Name => "Johnson, John ", SSN => "111223333", Salary => Salary_Conversions.To_Binary(Some_Salary)); begin Prog (Some_Record); ... end Test_Call; with Interfaces.COBOL; with COBOL_Sequential_IO; -- Assumed to be supplied by implementation procedure Test_External_Formats is -- Using data created by a COBOL program -- Assume that a COBOL program has created a sequential file with -- the following record structure, and that we need to -- process the records in an Ada program -- 01 EMPLOYEE-RECORD -- 05 NAME PIC X(20). -- 05 SSN PIC X(9). -- 05 SALARY PIC 99999V99 USAGE COMP. -- 05 ADJUST PIC S999V999 SIGN LEADING SEPARATE. -- The COMP data is binary (32 bits), high-order byte first package COBOL renames Interfaces.COBOL; type Salary_Type is delta 0.01 digits 7; type Adjustments_Type is delta 0.001 digits 6; type COBOL_Employee_Record_Type is -- External representation record Name : COBOL.Alphanumeric(1..20); SSN : COBOL.Alphanumeric(1..9); Salary : COBOL.Byte_Array(1..4); Adjust : COBOL.Numeric(1..7); -- Sign and 6 digits end record with Convention => COBOL; B.4 Interfacing with COBOL 13 December 2012 604 Ada Reference Manual — 2012 Edition package COBOL_Employee_IO is new COBOL_Sequential_IO(COBOL_Employee_Record_Type); use COBOL_Employee_IO; COBOL_File : File_Type; type Ada_Employee_Record_Type is -- Internal representation record Name : String(1..20); SSN : String(1..9); Salary : Salary_Type; Adjust : Adjustments_Type; end record; COBOL_Record : COBOL_Employee_Record_Type; Ada_Record : Ada_Employee_Record_Type; package Salary_Conversions is new COBOL.Decimal_Conversions(Salary_Type); use Salary_Conversions; package Adjustments_Conversions is new COBOL.Decimal_Conversions(Adjustments_Type); use Adjustments_Conversions; begin Open (COBOL_File, Name => "Some_File"); loop Read (COBOL_File, COBOL_Record); Ada_Record.Name := To_Ada(COBOL_Record.Name); Ada_Record.SSN := To_Ada(COBOL_Record.SSN); Ada_Record.Salary := To_Decimal(COBOL_Record.Salary, COBOL.High_Order_First); Ada_Record.Adjust := To_Decimal(COBOL_Record.Adjust, COBOL.Leading_Separate); ... -- Process Ada_Record end loop; exception when End_Error => ... end Test_External_Formats; B.5 Interfacing with Fortran The facilities relevant to interfacing with the Fortran language are the package Interfaces.Fortran and support for specifying the Convention aspect with convention_identifier Fortran. The package Interfaces.Fortran defines Ada types whose representations are identical to the default representations of the Fortran intrinsic types Integer, Real, Double Precision, Complex, Logical, and Character in a supported Fortran implementation. These Ada types can therefore be used to pass objects between Ada and Fortran programs. The library package Interfaces.Fortran has the following declaration: Static Semantics with Ada.Numerics.Generic_Complex_Types; -- see G.1.1 pragma Elaborate_All(Ada.Numerics.Generic_Complex_Types); package Interfaces.Fortran is pragma Pure(Fortran); type Fortran_Integer is range implementation-defined; type Real is digits implementation-defined; type Double_Precision is digits implementation-defined; type Logical is new Boolean; 605 13 December 2012 Interfacing with COBOL B.4 116 117 118 119 120 121 122 123 124 1/3 2 3 4 5 6 7 Ada Reference Manual — 2012 Edition 8 9 10 11 12/3 13 14 15 16 17 18 19 package Single_Precision_Complex_Types is new Ada.Numerics.Generic_Complex_Types (Real); type Complex is new Single_Precision_Complex_Types.Complex; subtype Imaginary is Single_Precision_Complex_Types.Imaginary; i : Imaginary renames Single_Precision_Complex_Types.i; j : Imaginary renames Single_Precision_Complex_Types.j; type Character_Set is implementation-defined character type; type Fortran_Character is array (Positive range <>) of Character_Set with Pack; function To_Fortran (Item : in Character) return Character_Set; function To_Ada (Item : in Character_Set) return Character; function To_Fortran (Item : in String) return Fortran_Character; function To_Ada (Item : in Fortran_Character) return String; procedure To_Fortran (Item : in String; Target : out Fortran_Character; Last : out Natural); procedure To_Ada (Item : in Fortran_Character; Target : out String; Last : out Natural); end Interfaces.Fortran; The types Fortran_Integer, Real, Double_Precision, Logical, Complex, and Fortran_Character are Fortran- compatible. The To_Fortran and To_Ada functions map between the Ada type Character and the Fortran type Character_Set, and also between the Ada type String and the Fortran type Fortran_Character. The To_Fortran and To_Ada procedures have analogous effects to the string conversion subprograms found in Interfaces.COBOL. 20/3 An implementation shall support specifying aspect Convention with a Fortran convention_identifier for a Fortran-eligible type (see B.1). Implementation Requirements 21 22 23 24 25 Implementation Permissions An implementation may add additional declarations to the Fortran interface packages. For example, the Fortran interface package for an implementation of Fortran 77 (ANSI X3.9-1978) that defines types like Integer*n, Real*n, Logical*n, and Complex*n may contain the declarations of types named Integer_- Star_n, Real_Star_n, Logical_Star_n, and Complex_Star_n. (This convention should not apply to Character*n, for which the Ada analog is the constrained array subtype Fortran_Character (1..n).) Similarly, the Fortran interface package for an implementation of Fortran 90 that provides multiple kinds of intrinsic types, e.g. Integer (Kind=n), Real (Kind=n), Logical (Kind=n), Complex (Kind=n), and Character (Kind=n), may contain the declarations of types with the recommended names Integer_Kind_n, Real_Kind_n, Logical_Kind_n, Complex_Kind_n, and Character_Kind_n. Implementation Advice An Ada implementation should support the following interface correspondences between Ada and Fortran: • An Ada procedure corresponds to a Fortran subroutine. • An Ada function corresponds to a Fortran function. • An Ada parameter of an elementary, array, or record type T is passed as a TF argument to a Fortran procedure, where TF is the Fortran type corresponding to the Ada type T, and where the INTENT attribute of the corresponding dummy argument matches the Ada formal parameter B.5 Interfacing with Fortran 13 December 2012 606 Ada Reference Manual — 2012 Edition mode; the Fortran implementation's parameter passing conventions are used. For elementary types, a local copy is used if necessary to ensure by-copy semantics. • An Ada parameter of an access-to-subprogram type is passed as a reference to a Fortran procedure whose interface corresponds to the designated subprogram's specification. NOTES 14 An object of a Fortran-compatible record type, declared in a library package or subprogram, can correspond to a Fortran common block; the type also corresponds to a Fortran “derived type”. Example of Interfaces.Fortran: Examples with Interfaces.Fortran; use Interfaces.Fortran; procedure Ada_Application is type Fortran_Matrix is array (Integer range <>, Integer range <>) of Double_Precision with Convention => Fortran; -- stored in Fortran's -- column-major order procedure Invert (Rank : in Fortran_Integer; X : in out Fortran_Matrix) with Import => True, Convention => Fortran; -- a Fortran subroutine Rank : constant Fortran_Integer := 100; My_Matrix : Fortran_Matrix (1 .. Rank, 1 .. Rank); begin ... My_Matrix := ...; ... Invert (Rank, My_Matrix); ... end Ada_Application; 26 27 28 29 30/3 31 32 33 34 607 13 December 2012 Interfacing with Fortran B.5 Ada Reference Manual — 2012 Edition Annex C (normative) Systems Programming The Systems Programming Annex specifies additional capabilities provided for low-level programming. These capabilities are also required in many real-time, embedded, distributed, and information systems. 1 C.1 Access to Machine Operations This subclause specifies rules regarding access to machine instructions from within an Ada program. 1/3 The implementation shall support machine code insertions (see 13.8) or intrinsic subprograms (see 6.3.1) (or both). Implementation-defined attributes shall be provided to allow the use of Ada entities as operands. Implementation Requirements Implementation Advice The machine code or intrinsics support should allow access to all operations normally available to assembly language programmers for the target environment, including privileged instructions, if any. The support for interfacing aspects (see Annex B) should include interface to assembler; the default assembler should be associated with the convention identifier Assembler. If an entity is exported to assembly language, then the implementation should allocate it at an addressable location, and should ensure that it is retained by the linking process, even if not otherwise referenced from the Ada code. The implementation should assume that any call to a machine code or assembler subprogram is allowed to read or update every object that is specified as exported. Documentation Requirements The implementation shall document the overhead associated with calling machine-code or intrinsic subprograms, as compared to a fully-inlined call, and to a regular out-of-line call. The implementation shall document the types of the package System.Machine_Code usable for machine code insertions, and the attributes to be used in machine code insertions for references to Ada entities. The implementation shall document the subprogram calling conventions associated with the convention identifiers available for use with the Convention aspect (Ada and Assembler, at a minimum), including register saving, exception propagation, parameter passing, and function value returning. For exported and imported subprograms, the implementation shall document the mapping between the Link_Name string, if specified, or the Ada designator, if not, and the external link name used for such a subprogram. Implementation Advice The implementation should ensure that little or no overhead is associated with calling intrinsic and machine-code subprograms. It is recommended that intrinsic subprograms be provided for convenient access to any machine operations that provide special capabilities or efficiency and that are not otherwise available through the language constructs. Examples of such instructions include: 2 3 4/3 5 6 7 8/3 9 10 11 609 13 December 2012 Systems Programming C 12 13 14 15 16 Ada Reference Manual — 2012 Edition • Atomic read-modify-write operations — e.g., test and set, compare and swap, decrement and test, enqueue/dequeue. • Standard numeric functions — e.g., sin, log. • String manipulation operations — e.g., translate and test. • Vector operations — e.g., compare vector against thresholds. • Direct operations on I/O ports. C.2 Required Representation Support 1/3 This subclause specifies minimal requirements on the support for representation items and related features. 2/3 The implementation shall support at least the functionality defined by the recommended levels of support in Clause 13. Implementation Requirements C.3 Interrupt Support 1/3 This subclause specifies the language-defined model for hardware interrupts in addition to mechanisms for handling interrupts. Dynamic Semantics 2 3 4 5 6 7 An interrupt represents a class of events that are detected by the hardware or the system software. Interrupts are said to occur. An occurrence of an interrupt is separable into generation and delivery. Generation of an interrupt is the event in the underlying hardware or system that makes the interrupt available to the program. Delivery is the action that invokes part of the program as response to the interrupt occurrence. Between generation and delivery, the interrupt occurrence (or interrupt) is pending. Some or all interrupts may be blocked. When an interrupt is blocked, all occurrences of that interrupt are prevented from being delivered. Certain interrupts are reserved. The set of reserved interrupts is implementation defined. A reserved interrupt is either an interrupt for which user-defined handlers are not supported, or one which already has an attached handler by some other implementation-defined means. Program units can be connected to nonreserved interrupts. While connected, the program unit is said to be attached to that interrupt. The execution of that program unit, the interrupt handler, is invoked upon delivery of the interrupt occurrence. While a handler is attached to an interrupt, it is called once for each delivered occurrence of that interrupt. While the handler executes, the corresponding interrupt is blocked. While an interrupt is blocked, all occurrences of that interrupt are prevented from being delivered. Whether such occurrences remain pending or are lost is implementation defined. Each interrupt has a default treatment which determines the system's response to an occurrence of that interrupt when no user-defined handler is attached. The set of possible default treatments is implementation defined, as is the method (if one exists) for configuring the default treatments for interrupts. An interrupt is delivered to the handler (or default treatment) that is in effect for that interrupt at the time of delivery. An exception propagated from a handler that is invoked by an interrupt has no effect. C.1 Access to Machine Operations 13 December 2012 610 Ada Reference Manual — 2012 Edition If the Ceiling_Locking policy (see D.3) is in effect, the interrupt handler executes with the active priority that is the ceiling priority of the corresponding protected object. Implementation Requirements The implementation shall provide a mechanism to determine the minimum stack space that is needed for each interrupt handler and to reserve that space for the execution of the handler. This space should accommodate nested invocations of the handler where the system permits this. If the hardware or the underlying system holds pending interrupt occurrences, the implementation shall provide for later delivery of these occurrences to the program. If the Ceiling_Locking policy is not in effect, the implementation shall provide means for the application to specify whether interrupts are to be blocked during protected actions. The implementation shall document the following items: Documentation Requirements 1. For each interrupt, which interrupts are blocked from delivery when a handler attached to that interrupt executes (either as a result of an interrupt delivery or of an ordinary call on a procedure of the corresponding protected object). 2. Any interrupts that cannot be blocked, and the effect of attaching handlers to such interrupts, if this is permitted. 3. Which run-time stack an interrupt handler uses when it executes as a result of an interrupt delivery; if this is configurable, what is the mechanism to do so; how to specify how much space to reserve on that stack. 4. Any implementation- or hardware-specific activity that happens before a user-defined interrupt handler gets control (e.g., reading device registers, acknowledging devices). 5. Any timing or other limitations imposed on the execution of interrupt handlers. 6. The state (blocked/unblocked) of the nonreserved interrupts when the program starts; if some interrupts are unblocked, what is the mechanism a program can use to protect itself before it can attach the corresponding handlers. 7. Whether the interrupted task is allowed to resume execution before the interrupt handler returns. 8. The treatment of interrupt occurrences that are generated while the interrupt is blocked; i.e., whether one or more occurrences are held for later delivery, or all are lost. 9. Whether predefined or implementation-defined exceptions are raised as a result of the occurrence of any interrupt, and the mapping between the machine interrupts (or traps) and the predefined exceptions. 10. On a multi-processor, the rules governing the delivery of an interrupt to a particular processor. Implementation Permissions If the underlying system or hardware does not allow interrupts to be blocked, then no blocking is required as part of the execution of subprograms of a protected object for which one of its subprograms is an interrupt handler. In a multi-processor with more than one interrupt subsystem, it is implementation defined whether (and how) interrupt sources from separate subsystems share the same Interrupt_Id type (see C.3.2). In particular, the meaning of a blocked or pending interrupt may then be applicable to one processor only. 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23/2 24 611 13 December 2012 Interrupt Support C.3 Ada Reference Manual — 2012 Edition 25 Implementations are allowed to impose timing or other limitations on the execution of interrupt handlers. 26/3 27 28/2 29 30 31 Other forms of handlers are allowed to be supported, in which case the rules of this subclause should be adhered to. The active priority of the execution of an interrupt handler is allowed to vary from one occurrence of the same interrupt to another. If the Ceiling_Locking policy is not in effect, the implementation should provide means for the application to specify which interrupts are to be blocked during protected actions, if the underlying system allows for finer-grained control of interrupt blocking. Implementation Advice NOTES 1 The default treatment for an interrupt can be to keep the interrupt pending or to deliver it to an implementation-defined handler. Examples of actions that an implementation-defined handler is allowed to perform include aborting the partition, ignoring (i.e., discarding occurrences of) the interrupt, or queuing one or more occurrences of the interrupt for possible later delivery when a user-defined handler is attached to that interrupt. 2 It is a bounded error to call Task_Identification.Current_Task (see C.7.1) from an interrupt handler. 3 The rule that an exception propagated from an interrupt handler has no effect is modeled after the rule about exceptions propagated out of task bodies. C.3.1 Protected Procedure Handlers Paragraphs 1 through 6 were moved to Annex J, “Obsolescent Features”. Static Semantics 6.1/3 For a parameterless protected procedure, the following language-defined representation aspects may be specified: 6.2/3 Interrupt_Handler The type of aspect Interrupt_Handler is Boolean. If directly specified, the aspect_definition shall be a static expression. This aspect is never inherited; if not directly specified, the aspect is False. 6.3/3 Attach_Handler aspect Attach_Handler The Interrupts.Interrupt_Id. This aspect is never inherited. is an expression, which shall be of type 7/3 If either the Attach_Handler or Interrupt_Handler aspect are specified for a protected procedure, the corresponding protected_type_declaration or single_protected_declaration shall be a library-level declaration and shall not be declared within a generic body. In addition to the places where Legality Rules normally apply (see 12.3), this rule also applies in the private part of an instance of a generic unit. Legality Rules 8/3 This paragraph was deleted. 9/3 If the Interrupt_Handler aspect of a protected procedure is True, then the procedure may be attached dynamically, as a handler, to interrupts (see C.3.2). Such procedures are allowed to be attached to multiple interrupts. Dynamic Semantics C.3 Interrupt Support 13 December 2012 612 Ada Reference Manual — 2012 Edition The expression specified for the Attach_Handler aspect of a protected procedure P is evaluated as part of the creation of the protected object that contains P. The value of the expression identifies an interrupt. As part of the initialization of that object, P (the handler procedure) is attached to the identified interrupt. A check is made that the corresponding interrupt is not reserved. Program_Error is raised if the check fails, and the existing treatment for the interrupt is not affected. If the Ceiling_Locking policy (see D.3) is in effect, then upon the initialization of a protected object that contains a protected procedure for which either the Attach_Handler aspect is specified or the Interrupt_Handler aspect is True, a check is made that the initial ceiling priority of the object is in the range of System.Interrupt_Priority. If the check fails, Program_Error is raised. When a protected object is finalized, for any of its procedures that are attached to interrupts, the handler is detached. If the handler was attached by a procedure in the Interrupts package or if no user handler was previously attached to the interrupt, the default treatment is restored. If the Attach_Handler aspect was specified and the most recently attached handler for the same interrupt is the same as the one that was attached at the time the protected object was initialized, the previous handler is restored. When a handler is attached to an interrupt, the interrupt is blocked (subject to the Implementation Permission in C.3) during the execution of every protected action on the protected object containing the handler. If the Ceiling_Locking policy (see D.3) is in effect and an interrupt is delivered to a handler, and the interrupt hardware priority is higher than the ceiling priority of the corresponding protected object, the execution of the program is erroneous. Erroneous Execution 10/3 11/3 12/3 13 14 If the handlers for a given interrupt attached via aspect Attach_Handler are not attached and detached in a stack-like (LIFO) order, program execution is erroneous. In particular, when a protected object is finalized, the execution is erroneous if any of the procedures of the protected object are attached to interrupts via aspect Attach_Handler and the most recently attached handler for the same interrupt is not the same as the one that was attached at the time the protected object was initialized. 14.1/3 The following metric shall be documented by the implementation: Metrics • The worst-case overhead for an interrupt handler that is a parameterless protected procedure, in clock cycles. This is the execution time not directly attributable to the handler procedure or the interrupted execution. It is estimated as C – (A+B), where A is how long it takes to complete a given sequence of instructions without any interrupt, B is how long it takes to complete a normal call to a given protected procedure, and C is how long it takes to complete the same sequence of instructions when it is interrupted by one execution of the same procedure called via an interrupt. Implementation Permissions When the aspects Attach_Handler or Interrupt_Handler are specified for a protected procedure, the implementation is allowed to impose implementation-defined restrictions on the corresponding protected_type_declaration and protected_body. An implementation may use a different mechanism for invoking a protected procedure in response to a hardware interrupt than is used for a call to that protected procedure from a task. Notwithstanding what this subclause says elsewhere, the Attach_Handler and Interrupt_Handler aspects are allowed to be used for other, implementation defined, forms of interrupt handlers. 15 16/2 17/3 18 19/3 613 13 December 2012 Protected Procedure Handlers C.3.1 Ada Reference Manual — 2012 Edition Implementation Advice Whenever possible, the implementation should allow interrupt handlers to be called directly by the hardware. Whenever practical, the implementation should detect violations of any implementation-defined restrictions before run time. NOTES 4 The Attach_Handler aspect may provide static attachment of handlers to interrupts if the implementation supports preelaboration of protected objects. (See C.4.) 5 A protected object that has a (protected) procedure attached to an interrupt should have a ceiling priority at least as high as the highest processor priority at which that interrupt will ever be delivered. 6 Protected procedures can also be attached dynamically to interrupts via operations declared in the predefined package Interrupts. 7 An example of a possible implementation-defined restriction is disallowing the use of the standard storage pools within the body of a protected procedure that is an interrupt handler. C.3.2 The Package Interrupts The following language-defined packages exist: Static Semantics with System; with System.Multiprocessors; package Ada.Interrupts is type Interrupt_Id is implementation-defined; type Parameterless_Handler is access protected procedure; This paragraph was deleted. function Is_Reserved (Interrupt : Interrupt_Id) return Boolean; function Is_Attached (Interrupt : Interrupt_Id) return Boolean; function Current_Handler (Interrupt : Interrupt_Id) return Parameterless_Handler; procedure Attach_Handler (New_Handler : in Parameterless_Handler; Interrupt : in Interrupt_Id); procedure Exchange_Handler (Old_Handler : out Parameterless_Handler; New_Handler : in Parameterless_Handler; Interrupt : in Interrupt_Id); procedure Detach_Handler (Interrupt : in Interrupt_Id); function Reference (Interrupt : Interrupt_Id) return System.Address; function Get_CPU (Interrupt : Interrupt_Id) return System.Multiprocessors.CPU_Range; private ... -- not specified by the language end Ada.Interrupts; 20 21 22/3 23/2 24 25 1 2/3 3/1 4 5 6 7 8 9 10 10.1/3 11 C.3.1 Protected Procedure Handlers 13 December 2012 614 Ada Reference Manual — 2012 Edition package Ada.Interrupts.Names is implementation-defined : constant Interrupt_Id := implementation-defined; . . . implementation-defined : constant Interrupt_Id := implementation-defined; end Ada.Interrupts.Names; Dynamic Semantics The Interrupt_Id type is an implementation-defined discrete type used to identify interrupts. The Is_Reserved function returns True if and only if the specified interrupt is reserved. The Is_Attached function returns True if and only if a user-specified interrupt handler is attached to the interrupt. The Current_Handler function returns a value that represents the attached handler of the interrupt. If no user-defined handler is attached to the interrupt, Current_Handler returns null. The Attach_Handler procedure attaches the specified handler to the interrupt, overriding any existing treatment (including a user handler) in effect for that interrupt. If New_Handler is null, the default treatment is restored. If New_Handler designates a protected procedure for which the aspect Interrupt_- Handler is False, Program_Error is raised. In this case, the operation does not modify the existing interrupt treatment. The Exchange_Handler procedure operates in the same manner as Attach_Handler with the addition that the value returned in Old_Handler designates the previous treatment for the specified interrupt. If the previous treatment is not a user-defined handler, null is returned. The Detach_Handler procedure restores the default treatment for the specified interrupt. For all operations defined in this package that take a parameter of type Interrupt_Id, with the exception of Is_Reserved and Reference, a check is made that the specified interrupt is not reserved. Program_Error is raised if this check fails. If, by using the Attach_Handler, Detach_Handler, or Exchange_Handler procedures, an attempt is made to detach a handler that was attached statically (using the aspect Attach_Handler), the handler is not detached and Program_Error is raised. The Reference function returns a value of type System.Address that can be used to attach a task entry via an address clause (see J.7.1) to the interrupt specified by Interrupt. This function raises Program_Error if attaching task entries to interrupts (or to this particular interrupt) is not supported. 12 13 14 15 16/1 17/3 18/1 19 20 21/3 22/2 The function Get_CPU returns the processor on which the handler for Interrupt is executed. If the handler can execute on more than one processor the value System.Multiprocessors.Not_A_Specific_CPU is returned. 22.1/3 At no time during attachment or exchange of handlers shall the current handler of the corresponding interrupt be undefined. 23 Implementation Requirements If the Ceiling_Locking policy (see D.3) is in effect, the implementation shall document the default ceiling priority assigned to a protected object that contains a protected procedure that specifies either the 24/3 Documentation Requirements 615 13 December 2012 The Package Interrupts C.3.2 Ada Reference Manual — 2012 Edition Attach_Handler or Interrupt_Handler aspects, but does not specify the Interrupt_Priority aspect. This default need not be the same for all interrupts. Implementation Advice 25 26 If implementation-defined forms of interrupt handler procedures are supported, such as protected procedures with parameters, then for each such form of a handler, a type analogous to Parameterless_- Handler should be specified in a child package of Interrupts, with the same operations as in the predefined package Interrupts. NOTES 8 The package Interrupts.Names contains implementation-defined names (and constant values) for the interrupts that are supported by the implementation. 27 Example of interrupt handlers: Examples 28/3 Device_Priority : constant array (1..5) of System.Interrupt_Priority := ( ... ); protected type Device_Interface (Int_Id : Ada.Interrupts.Interrupt_Id) with Interrupt_Priority => Device_Priority(Int_Id) is procedure Handler with Attach_Handler => Int_Id; ... end Device_Interface; ... Device_1_Driver : Device_Interface(1); ... Device_5_Driver : Device_Interface(5); ... C.4 Preelaboration Requirements 1/3 This subclause specifies additional implementation and documentation requirements for the Preelaborate pragma (see 10.2.1). Implementation Requirements 2 3 4 The implementation shall not incur any run-time overhead for the elaboration checks of subprograms and protected_bodies declared in preelaborated library units. The implementation shall not execute any memory write operations after load time for the elaboration of constant objects declared immediately within the declarative region of a preelaborated library package, so long as the subtype and initial expression (or default initial expressions if initialized by default) of the object_declaration satisfy the following restrictions. The meaning of load time is implementation defined. • Any subtype_mark denotes a statically constrained subtype, with statically constrained subcomponents, if any; 4.1/2 • no subtype_mark denotes a controlled type, a private type, a private extension, a generic formal private type, a generic formal derived type, or a descendant of such a type; 5 6 7 • any constraint is a static constraint; • any allocator is for an access-to-constant type; • any uses of predefined operators appear only within static expressions; C.3.2 The Package Interrupts 13 December 2012 616 Ada Reference Manual — 2012 Edition • any primaries that are names, other than attribute_references for the Access or Address attributes, appear only within static expressions; • any name that is not part of a static expression is an expanded name or direct_name that statically denotes some entity; • any discrete_choice of an array_aggregate is static; • no language-defined check associated with the elaboration of the object_declaration can fail. Documentation Requirements The implementation shall document any circumstances under which the elaboration of a preelaborated package causes code to be executed at run time. The implementation shall document whether the method used for initialization of preelaborated variables allows a partition to be restarted without reloading. It is recommended that preelaborated packages be implemented in such a way that there should be little or no code executed at run time for the elaboration of entities not already covered by the Implementation Requirements. Implementation Advice C.5 Pragma Discard_Names A pragma Discard_Names may be used to request a reduction in storage used for the names of certain entities. The form of a pragma Discard_Names is as follows: pragma Discard_Names[([On => ] local_name)]; Syntax A pragma Discard_Names is allowed only immediately within a declarative_part, immediately within a package_specification, or as a configuration pragma. Legality Rules The local_name (if present) shall denote a nonderived enumeration first subtype, a tagged first subtype, or an exception. The pragma applies to the type or exception. Without a local_name, the pragma applies to all such entities declared after the pragma, within the same declarative region. Alternatively, the pragma can be used as a configuration pragma. If the pragma applies to a type, then it applies also to all descendants of the type. If a local_name is given, then a pragma Discard_Names is a representation pragma. Static Semantics If the pragma applies to an enumeration type, then the semantics of the Wide_Wide_Image and Wide_Wide_Value attributes are implementation defined for that type; the semantics of Image, Wide_Image, Value, and Wide_Value are still defined terms of Wide_Wide_Image and Wide_Wide_Value. In addition, the semantics of Text_IO.Enumeration_IO are implementation defined. If the pragma applies to a tagged type, then the semantics of the Tags.Wide_Wide_Expanded_Name function are implementation defined for that type; the semantics of Tags.Expanded_Name and Tags.Wide_- Expanded_Name are still defined in terms of Tags.Wide_Wide_Expanded_Name. If the pragma applies to the Exceptions.Wide_Wide_Exception_Name function are an exception, the semantics of then in 8 9 10 11 12 13 14 1 2 3 4 5 6 7/2 617 13 December 2012 Preelaboration Requirements C.4 Ada Reference Manual — 2012 Edition implementation defined for that exception; the semantics of Exceptions.Exception_Name and Exceptions.- Wide_Exception_Name are still defined in terms of Exceptions.Wide_Wide_Exception_Name. 8 If the pragma applies to an entity, then the implementation should reduce the amount of storage used for storing names associated with that entity. Implementation Advice C.6 Shared Variable Control 1/3 This subclause defines representation aspects that control the use of shared variables. Paragraphs 2 through 6 were moved to Annex J, “Obsolescent Features”. 6.1/3 For an object_declaration, a component_declaration, or a full_type_declaration, the following representation aspects may be specified: Static Semantics 6.2/3 Atomic The type of aspect Atomic is Boolean. 6.3/3 Independent The type of aspect Independent is Boolean. 6.4/3 Volatile The type of aspect Volatile is Boolean. 6.5/3 For a full_type_declaration of an array type (including the anonymous type of an object_declaration of an anonymous array object), the following representation aspects may be specified: 6.6/3 Atomic_Components The type of aspect Atomic_Components is Boolean. 6.7/3 Volatile_Components The type of aspect Volatile_Components is Boolean. 6.8/3 For a full_type_declaration (including the anonymous type of an object_declaration of an anonymous array object), the following representation aspect may be specified: 6.9/3 Independent_Components The type of aspect Independent_Components is Boolean. 6.10/3 If any of these aspects are directly specified, the aspect_definition shall be a static expression. If not specified (including by inheritance), each of these aspects is False. 7/3 8/3 An atomic type is one for which the aspect Atomic is True. An atomic object (including a component) is one for which the aspect Atomic is True, or a component of an array for which the aspect Atomic_Components is True for the associated type, or any object of an atomic type, other than objects obtained by evaluating a slice. A volatile type is one for which the aspect Volatile is True. A volatile object (including a component) is one for which the aspect Volatile is True, or a component of an array for which the aspect Volatile_- Components is True for the associated type, or any object of a volatile type. In addition, every atomic type or object is also defined to be volatile. Finally, if an object is volatile, then so are all of its subcomponents (the same does not apply to atomic). 8.1/3 When True, the aspects Independent and Independent_Components specify as independently addressable the named object or component(s), or in the case of a type, all objects or components of that type. All atomic objects are considered to be specified as independently addressable. C.5 Pragma Discard_Names 13 December 2012 618 Ada Reference Manual — 2012 Edition Paragraph 9 was moved to Annex J, “Obsolescent Features”. Legality Rules If aspect Independent_Components is specified for a full_type_declaration, the declaration shall be that of an array or record type. It is illegal to specify either of the aspects Atomic or Atomic_Components to have the value True for an object or type if the implementation cannot support the indivisible reads and updates required by the aspect (see below). It is illegal to specify the Size attribute of an atomic object, the Component_Size attribute for an array type with atomic components, or the layout attributes of an atomic component, in a way that prevents the implementation from performing the required indivisible reads and updates. If an atomic object is passed as a parameter, then the formal parameter shall either have an atomic type or allow pass by copy. If an atomic object is used as an actual for a generic formal object of mode in out, then the type of the generic formal object shall be atomic. If the prefix of an attribute_reference for an Access attribute denotes an atomic object (including a component), then the designated type of the resulting access type shall be atomic. If an atomic type is used as an actual for a generic formal derived type, then the ancestor of the formal type shall be atomic. Corresponding rules apply to volatile objects and types. 9.1/3 10/3 11 12/3 If a volatile type is used as an actual for a generic formal array type, then the element type of the formal type shall be volatile. 12.1/3 If an aspect Volatile, Volatile_Components, Atomic, or Atomic_Components is directly specified to have the value True for a stand-alone constant object, then the aspect Import shall also be specified as True for it. 13/3 It is illegal to specify the aspect Independent or Independent_Components as True for a component, object or type if the implementation cannot provide the independent addressability required by the aspect (see 9.10). It is illegal to specify a representation aspect for a component, object or type for which the aspect Independent or Independent_Components is True, in a way that prevents the implementation from providing the independent addressability required by the aspect. Paragraph 14 was moved to Annex J, “Obsolescent Features”. Dynamic Semantics For an atomic object (including an atomic component) all reads and updates of the object as a whole are indivisible. All tasks of the program (on all processors) that read or update volatile variables see the same order of updates to the variables. A use of an atomic variable or other mechanism may be necessary to avoid erroneous execution and to ensure that access to nonatomic volatile variables is sequential (see 9.10). Two actions are sequential (see 9.10) if each is the read or update of the same atomic object. If a type is atomic or volatile and it is not a by-copy type, then the type is defined to be a by-reference type. If any subcomponent of a type is atomic or volatile, then the type is defined to be a by-reference type. 13.1/3 13.2/3 15 16/3 17 18 619 13 December 2012 Shared Variable Control C.6 Ada Reference Manual — 2012 Edition 19 20 If an actual parameter is atomic or volatile, and the corresponding formal parameter is not, then the parameter is passed by copy. The external effect of a program (see 1.1.3) is defined to include each read and update of a volatile or atomic object. The implementation shall not generate any memory reads or updates of atomic or volatile objects other than those specified by the program. Implementation Requirements 21/3 If the Pack aspect is True for a type any of whose subcomponents are atomic, the implementation shall not pack the atomic subcomponents more tightly than that for which it can support indivisible reads and updates. Implementation Advice 22/2 23/2 24 A load or store of a volatile object whose size is a multiple of System.Storage_Unit and whose alignment is nonzero, should be implemented by accessing exactly the bits of the object and no others. A load or store of an atomic object should, where possible, be implemented by a single load or store instruction. NOTES 9 An imported volatile or atomic constant behaves as a constant (i.e. read-only) with respect to other parts of the Ada program, but can still be modified by an “external source.” C.7 Task Information 1/3 This subclause describes operations and attributes that can be used to obtain the identity of a task. In addition, a package that associates user-defined information with a task is defined. Finally, a package that associates termination procedures with a task or set of tasks is defined. C.7.1 The Package Task_Identification Static Semantics 1 2/2 3/3 4/3 The following language-defined library package exists: package Ada.Task_Identification is pragma Preelaborate(Task_Identification); type Task_Id is private; pragma Preelaborable_Initialization (Task_Id); Null_Task_Id : constant Task_Id; function "=" (Left, Right : Task_Id) return Boolean; function Image (T : Task_Id) return String; function Current_Task return Task_Id; function Environment_Task return Task_Id; procedure Abort_Task (T : in Task_Id); function Is_Terminated (T : Task_Id) return Boolean; function Is_Callable (T : Task_Id) return Boolean; function Activation_Is_Complete (T : Task_Id) return Boolean; private ... -- not specified by the language end Ada.Task_Identification; 5 A value of the type Task_Id identifies an existent task. The constant Null_Task_Id does not identify any task. Each object of the type Task_Id is default initialized to the value of Null_Task_Id. Dynamic Semantics C.6 Shared Variable Control 13 December 2012 620 Ada Reference Manual — 2012 Edition The function "=" returns True if and only if Left and Right identify the same task or both have the value Null_Task_Id. The function Image returns an implementation-defined string that identifies T. If T equals Null_Task_Id, Image returns an empty string. The function Current_Task returns a value that identifies the calling task. The function Environment_Task returns a value that identifies the environment task. The effect of Abort_Task is the same as the abort_statement for the task identified by T. In addition, if T identifies the environment task, the entire partition is aborted, See E.1. The functions Is_Terminated and Is_Callable return the value of the corresponding attribute of the task identified by T. The function Activation_Is_Complete returns True if the task identified by T has completed its activation (whether successfully or not). It returns False otherwise. If T identifies the environment task, Activation_Is_Complete returns True after the elaboration of the library_items of the partition has completed. For a prefix T that is of a task type (after any implicit dereference), the following attribute is defined: T'Identity Yields a value of the type Task_Id that identifies the task denoted by T. For a prefix E that denotes an entry_declaration, the following attribute is defined: E'Caller Yields a value of the type Task_Id that identifies the task whose call is now being serviced. Use of this attribute is allowed only inside an accept_statement, or entry_body after the entry_barrier, corresponding to the entry_declaration denoted by E. Program_Error is raised if a value of Null_Task_Id is passed as a parameter to Abort_Task, Is_Terminated, and Is_Callable. Abort_Task is a potentially blocking operation (see 9.5.1). It is a bounded error to call the Current_Task function from an entry_body, interrupt handler, or finalization of a task attribute. Program_Error is raised, or an implementation-defined value of the type Task_Id is returned. Bounded (Run-Time) Errors If a value of Task_Id is passed as a parameter to any of the operations declared in this package (or any language-defined child of this package), and the corresponding task object no longer exists, the execution of the program is erroneous. Erroneous Execution Documentation Requirements The implementation shall document the effect of calling Current_Task from an entry body or interrupt handler. NOTES 10 This package is intended for use in writing user-defined task scheduling packages and constructing server tasks. Current_Task can be used in conjunction with other operations requiring a task as an argument such as Set_Priority (see D.5). 6 7 8 8.1/3 9 10 10.1/3 11 12 13 14/3 15 16 17/3 18 19 20 11 The function Current_Task and the attribute Caller can return a Task_Id value that identifies the environment task. 21 621 13 December 2012 The Package Task_Identification C.7.1 Ada Reference Manual — 2012 Edition C.7.2 The Package Task_Attributes The following language-defined generic library package exists: Static Semantics with Ada.Task_Identification; use Ada.Task_Identification; generic type Attribute is private; Initial_Value : in Attribute; package Ada.Task_Attributes is type Attribute_Handle is access all Attribute; function Value(T : Task_Id := Current_Task) return Attribute; function Reference(T : Task_Id := Current_Task) return Attribute_Handle; procedure Set_Value(Val : in Attribute; T : in Task_Id := Current_Task); procedure Reinitialize(T : in Task_Id := Current_Task); end Ada.Task_Attributes; Dynamic Semantics When an instance of Task_Attributes is elaborated in a given active partition, an object of the actual type corresponding to the formal type Attribute is implicitly created for each task (of that partition) that exists and is not yet terminated. This object acts as a user-defined attribute of the task. A task created previously in the partition and not yet terminated has this attribute from that point on. Each task subsequently created in the partition will have this attribute when created. In all these cases, the initial value of the given attribute is Initial_Value. The Value operation returns the value of the corresponding attribute of T. The Reference operation returns an access value that designates the corresponding attribute of T. The Set_Value operation performs any finalization on the old value of the attribute of T and assigns Val to that attribute (see 5.2 and 7.6). The effect of the Reinitialize operation is the same as Set_Value where the Val parameter is replaced with Initial_Value. For all the operations declared in this package, Tasking_Error is raised if the task identified by T is terminated. Program_Error is raised if the value of T is Null_Task_Id. 1 2 3 4 5 6 7 8 9 10 11 12 13 13.1/2 After a task has terminated, all of its attributes are finalized, unless they have been finalized earlier. When the master of an instantiation of Ada.Task_Attributes is finalized, the corresponding attribute of each task is finalized, unless it has been finalized earlier. Bounded (Run-Time) Errors 13.2/1 If the package Ada.Task_Attributes is instantiated with a controlled type and the controlled type has user- defined Adjust or Finalize operations that in turn access task attributes by any of the above operations, then a call of Set_Value of the instantiated package constitutes a bounded error. The call may perform as expected or may result in forever blocking the calling task and subsequently some or all tasks of the partition. C.7.2 The Package Task_Attributes 13 December 2012 622 Ada Reference Manual — 2012 Edition Erroneous Execution It is erroneous to dereference the access value returned by a given call on Reference after a subsequent call on Reinitialize for the same task attribute, or after the associated task terminates. If a value of Task_Id is passed as a parameter to any of the operations declared in this package and the corresponding task object no longer exists, the execution of the program is erroneous. 14 15 An access to a task attribute via a value of type Attribute_Handle is erroneous if executed concurrently with another such access or a call of any of the operations declared in package Task_Attributes. An access to a task attribute is erroneous if executed concurrently with or after the finalization of the task attribute. 15.1/2 Implementation Requirements For a given attribute of a given task, the implementation shall perform the operations declared in this package atomically with respect to any of these operations of the same attribute of the same task. The granularity of any locking mechanism necessary to achieve such atomicity is implementation defined. 16/1 After task attributes are finalized, the implementation shall reclaim any storage associated with the attributes. 17/2 Documentation Requirements The implementation shall document the limit on the number of attributes per task, if any, and the limit on the total storage for attribute values per task, if such a limit exists. In addition, if these limits can be configured, the implementation shall document how to configure them. Metrics The implementation shall document the following metrics: A task calling the following subprograms shall execute at a sufficiently high priority as to not be preempted during the measurement period. This period shall start just before issuing the call and end just after the call completes. If the attributes of task T are accessed by the measurement tests, no other task shall access attributes of that task during the measurement period. For all measurements described here, the Attribute type shall be a scalar type whose size is equal to the size of the predefined type Integer. For each measurement, two cases shall be documented: one where the accessed attributes are of the calling task (that is, the default value for the T parameter is used), and the other, where T identifies another, nonterminated, task. The following calls (to subprograms in the Task_Attributes package) shall be measured: • a call to Value, where the return value is Initial_Value; • a call to Value, where the return value is not equal to Initial_Value; • a call to Reference, where the return value designates a value equal to Initial_Value; • a call to Reference, where the return value designates a value not equal to Initial_Value; • a call to Set_Value where the Val parameter is not equal to Initial_Value and the old attribute value is equal to Initial_Value; • a call to Set_Value where the Val parameter is not equal to Initial_Value and the old attribute value is not equal to Initial_Value. An implementation need not actually create the object corresponding to a task attribute until its value is set to something other than that of Initial_Value, or until Reference is called for the task attribute. Similarly, when the value of the attribute is to be reinitialized to that of Initial_Value, the object may instead be Implementation Permissions 18 19 20/2 21 22 23 24 25 26/2 27 28 623 13 December 2012 The Package Task_Attributes C.7.2 Ada Reference Manual — 2012 Edition finalized and its storage reclaimed, to be recreated when needed later. While the object does not exist, the function Value may simply return Initial_Value, rather than implicitly creating the object. 29 An implementation is allowed to place restrictions on the maximum number of attributes a task may have, the maximum size of each attribute, and the total storage size allocated for all the attributes of a task. Implementation Advice 30/2 Some implementations are targeted to domains in which memory use at run time must be completely deterministic. For such implementations, it is recommended that the storage for task attributes will be pre- allocated statically and not from the heap. This can be accomplished by either placing restrictions on the number and the size of the attributes of a task, or by using the pre-allocated storage for the first N attribute objects, and the heap for the others. In the latter case, N should be documented. 30.1/2 Finalization of task attributes and reclamation of associated storage should be performed as soon as possible after task termination. 31 32 1/2 2/2 3/2 4/2 5/2 6/2 7/2 8/3 NOTES 12 An attribute always exists (after instantiation), and has the initial value. It need not occupy memory until the first operation that potentially changes the attribute value. The same holds true after Reinitialize. 13 The result of the Reference function should be used with care; it is always safe to use that result in the task body whose attribute is being accessed. However, when the result is being used by another task, the programmer must make sure that the task whose attribute is being accessed is not yet terminated. Failing to do so could make the program execution erroneous. C.7.3 The Package Task_Termination The following language-defined library package exists: Static Semantics with Ada.Task_Identification; with Ada.Exceptions; package Ada.Task_Termination is pragma Preelaborate(Task_Termination); type Cause_Of_Termination is (Normal, Abnormal, Unhandled_Exception); type Termination_Handler is access protected procedure (Cause : in Cause_Of_Termination; T : in Ada.Task_Identification.Task_Id; X : in Ada.Exceptions.Exception_Occurrence); procedure Set_Dependents_Fallback_Handler (Handler: in Termination_Handler); function Current_Task_Fallback_Handler return Termination_Handler; procedure Set_Specific_Handler (T : in Ada.Task_Identification.Task_Id; Handler : in Termination_Handler); function Specific_Handler (T : Ada.Task_Identification.Task_Id) return Termination_Handler; end Ada.Task_Termination; Dynamic Semantics The type Termination_Handler identifies a protected procedure to be executed by the implementation when a task terminates. Such a protected procedure is called a handler. In all cases T identifies the task that is terminating. If the task terminates due to completing the last statement of its body, or as a result of waiting on a terminate alternative, and the finalization of the task completes normally, then Cause is set to Normal and X is set to Null_Occurrence. If the task terminates because it is being aborted, then Cause is C.7.2 The Package Task_Attributes 13 December 2012 624 Ada Reference Manual — 2012 Edition set to Abnormal; X is set to Null_Occurrence if the finalization of the task completes normally. If the task terminates because of an exception raised by the execution of its task_body, then Cause is set to Unhandled_Exception; X is set to the associated exception occurrence if the finalization of the task completes normally. Independent of how the task completes, if finalization of the task propagates an exception, then Cause is either Unhandled_Exception or Abnormal, and X is an exception occurrence that identifies the Program_Error exception. Each task has two termination handlers, a fall-back handler and a specific handler. The specific handler applies only to the task itself, while the fall-back handler applies only to the dependent tasks of the task. A handler is said to be set if it is associated with a nonnull value of type Termination_Handler, and cleared otherwise. When a task is created, its specific handler and fall-back handler are cleared. The procedure Set_Dependents_Fallback_Handler changes the fall-back handler for the calling task: if Handler is null, that fall-back handler is cleared; otherwise, it is set to be Handler.all. If a fall-back handler had previously been set it is replaced. The function Current_Task_Fallback_Handler returns the fall-back handler that is currently set for the calling task, if one is set; otherwise, it returns null. The procedure Set_Specific_Handler changes the specific handler for the task identified by T: if Handler is null, that specific handler is cleared; otherwise, it is set to be Handler.all. If a specific handler had previously been set it is replaced. The function Specific_Handler returns the specific handler that is currently set for the task identified by T, if one is set; otherwise, it returns null. As part of the finalization of a task_body, after performing the actions specified in 7.6 for finalization of a master, the specific handler for the task, if one is set, is executed. If the specific handler is cleared, a search for a fall-back handler proceeds by recursively following the master relationship for the task. If a task is found whose fall-back handler is set, that handler is executed; otherwise, no handler is executed. 9/2 10/3 11/3 12/3 13/3 14/2 For Set_Specific_Handler or Specific_Handler, Tasking_Error is raised if the task identified by T has already terminated. Program_Error is raised if the value of T is Ada.Task_Identification.Null_Task_Id. 15/2 An exception propagated from a handler that is invoked as part of the termination of a task has no effect. 16/2 For a call of Set_Specific_Handler or Specific_Handler, if the task identified by T no longer exists, the execution of the program is erroneous. 17/2 Erroneous Execution 625 13 December 2012 The Package Task_Termination C.7.3 Ada Reference Manual — 2012 Edition Annex D (normative) Real-Time Systems This Annex specifies additional characteristics of Ada implementations intended for real-time systems software. To conform to this Annex, an implementation shall also conform to the Systems Programming Annex. Metrics The metrics are documentation requirements; an implementation shall document the values of the language-defined metrics for at least one configuration of hardware or an underlying system supported by the implementation, and shall document the details of that configuration. The metrics do not necessarily yield a simple number. For some, a range is more suitable, for others a formula dependent on some parameter is appropriate, and for others, it may be more suitable to break the metric into several cases. Unless specified otherwise, the metrics in this annex are expressed in processor clock cycles. For metrics that require documentation of an upper bound, if there is no upper bound, the implementation shall report that the metric is unbounded. NOTES 1 The specification of the metrics makes a distinction between upper bounds and simple execution times. Where something is just specified as “the execution time of” a piece of code, this leaves one the freedom to choose a nonpathological case. This kind of metric is of the form “there exists a program such that the value of the metric is V”. Conversely, the meaning of upper bounds is “there is no program such that the value of the metric is greater than V”. This kind of metric can only be partially tested, by finding the value of V for one or more test programs. 2 The metrics do not cover the whole language; they are limited to features that are specified in Annex C, “Systems Programming” and in this Annex. The metrics are intended to provide guidance to potential users as to whether a particular implementation of such a feature is going to be adequate for a particular real-time application. As such, the metrics are aimed at known implementation choices that can result in significant performance differences. 3 The purpose of the metrics is not necessarily to provide fine-grained quantitative results or to serve as a comparison between different implementations on the same or different platforms. Instead, their goal is rather qualitative; to define a standard set of approximate values that can be measured and used to estimate the general suitability of an implementation, or to evaluate the comparative utility of certain features of an implementation for a particular real-time application. 1 2 3 4 5 6 D.1 Task Priorities This subclause specifies the priority model for real-time systems. In addition, the methods for specifying priorities are defined. 1/3 Paragraphs 2 through 6 were moved to Annex J, “Obsolescent Features”. Static Semantics For a task type (including the anonymous type of a single_task_declaration), protected type (including the anonymous type of a single_protected_declaration), or subprogram, the following language-defined representation aspects may be specified: Priority The aspect Priority is an expression, which shall be of type Integer. Interrupt_Priority The aspect Interrupt_Priority is an expression, which shall be of type Integer. 6.1/3 6.2/3 6.3/3 627 13 December 2012 Real-Time Systems D Ada Reference Manual — 2012 Edition This paragraph was deleted. Legality Rules If the Priority aspect is specified for a subprogram, the expression shall be static, and its value shall be in the range of System.Priority. 7/3 8/3 8.1/3 At most one of the Priority and Interrupt_Priority aspects may be specified for a given entity. 8.2/3 Neither of the Priority or Interrupt_Priority aspects shall be specified for a synchronized interface type. 9 10 11 12 The following declarations exist in package System: Static Semantics subtype Any_Priority is Integer range implementation-defined; subtype Priority is Any_Priority range Any_Priority'First .. implementation-defined; subtype Interrupt_Priority is Any_Priority range Priority'Last+1 .. Any_Priority'Last; Default_Priority : constant Priority := (Priority'First + Priority'Last)/2; The full range of priority values supported by an implementation is specified by the subtype Any_Priority. The subrange of priority values that are high enough to require the blocking of one or more interrupts is specified by the subtype Interrupt_Priority. The subrange of priority values below System.Interrupt_- Priority'First is specified by the subtype System.Priority. 13/3 This paragraph was deleted. Dynamic Semantics 14/3 15 16/3 17/3 18/3 19/3 The Priority aspect has no effect if it is specified for a subprogram other than the main subprogram; the Priority value is not associated with any task. A task priority is an integer value that indicates a degree of urgency and is the basis for resolving competing demands of tasks for resources. Unless otherwise specified, whenever tasks compete for processors or other implementation-defined resources, the resources are allocated to the task with the highest priority value. The base priority of a task is the priority with which it was created, or to which it was later set by Dynamic_Priorities.Set_Priority (see D.5). At all times, a task also has an active priority, which generally reflects its base priority as well as any priority it inherits from other sources. Priority inheritance is the process by which the priority of a task or other entity (e.g. a protected object; see D.3) is used in the evaluation of another task's active priority. The effect of specifying a Priority or single_protected_declaration is discussed in D.3. Interrupt_Priority aspect for a protected type or The expression specified for the Priority or Interrupt_Priority aspect of a task is evaluated for each task object (see 9.1). For the Priority aspect, the value of the expression is converted to the subtype Priority; for the Interrupt_Priority aspect, this value is converted to the subtype Any_Priority. The priority value is then associated with the task object whose task declaration specifies the aspect. Likewise, the priority value is associated with the environment task if the aspect is specified for the main subprogram. The initial value of a task's base priority is specified by default or by means of a Priority or Interrupt_Priority aspect. After a task is created, its base priority can be changed only by a call to Dynamic_Priorities.Set_Priority (see D.5). The initial base priority of a task in the absence of an aspect is the base priority of the task that creates it at the time of creation (see 9.1). If the aspect Priority is not D.1 Task Priorities 13 December 2012 628 Ada Reference Manual — 2012 Edition for the main subprogram, specified is System.Default_Priority. The task's active priority is used when the task competes for processors. Similarly, the task's active priority is used to determine the task's position in any queue when Priority_Queuing is specified (see D.4). initial base priority of the environment task the At any time, the active priority of a task is the maximum of all the priorities the task is inheriting at that instant. For a task that is not held (see D.11), its base priority is a source of priority inheritance unless otherwise specified for a particular task dispatching policy. Other sources of priority inheritance are specified under the following conditions: • During activation, a task being activated inherits the active priority that its activator (see 9.2) had at the time the activation was initiated. • During rendezvous, the task accepting the entry call inherits the priority of the entry call (see 9.5.3 and D.4). • During a protected action on a protected object, a task inherits the ceiling priority of the protected object (see 9.5 and D.3). In all of these cases, the priority ceases to be inherited as soon as the condition calling for the inheritance no longer exists. The range of System.Interrupt_Priority shall include at least one value. The range of System.Priority shall include at least 30 values. Implementation Requirements NOTES 4 The priority expression can include references to discriminants of the enclosing type. 5 It is a consequence of the active priority rules that at the point when a task stops inheriting a priority from another source, its active priority is re-evaluated. This is in addition to other instances described in this Annex for such re- evaluation. 20/2 21/1 22/1 23 24 25 26 27 28 6 An implementation may provide a nonstandard mode in which tasks inherit priorities under conditions other than those specified above. 29/3 D.2 Priority Scheduling This subclause describes the rules that determine which task is selected for execution when more than one task is ready (see 9). 1/3 D.2.1 The Task Dispatching Model The task dispatching model specifies task scheduling, based on conceptual priority-ordered ready queues. 1/2 Static Semantics The following language-defined library package exists: package Ada.Dispatching is pragma Preelaborate(Dispatching); procedure Yield; Dispatching_Policy_Error : exception; end Ada.Dispatching; 1.1/2 1.2/3 1.3/3 1.4/3 Dispatching serves as the parent of other language-defined library units concerned with task dispatching. 1.5/2 629 13 December 2012 Task Priorities D.1 Ada Reference Manual — 2012 Edition 2/2 3 4/2 5/2 6/2 7/3 8/2 9/2 10 Dynamic Semantics A task can become a running task only if it is ready (see 9) and the execution resources required by that task are available. Processors are allocated to tasks based on each task's active priority. It is implementation defined whether, on a multiprocessor, a task that is waiting for access to a protected object keeps its processor busy. Task dispatching is the process by which one ready task is selected for execution on a processor. This selection is done at certain points during the execution of a task called task dispatching points. A task reaches a task dispatching point whenever it becomes blocked, and when it terminates. Other task dispatching points are defined throughout this Annex for specific policies. Task dispatching policies are specified in terms of conceptual ready queues and task states. A ready queue is an ordered list of ready tasks. The first position in a queue is called the head of the queue, and the last position is called the tail of the queue. A task is ready if it is in a ready queue, or if it is running. Each processor has one ready queue for each priority value. At any instant, each ready queue of a processor contains exactly the set of tasks of that priority that are ready for execution on that processor, but are not running on any processor; that is, those tasks that are ready, are not running on any processor, and can be executed using that processor and other available resources. A task can be on the ready queues of more than one processor. Each processor also has one running task, which is the task currently being executed by that processor. Whenever a task running on a processor reaches a task dispatching point it goes back to one or more ready queues; a task (possibly the same task) is then selected to run on that processor. The task selected is the one at the head of the highest priority nonempty ready queue; this task is then removed from all ready queues to which it belongs. A call of Yield is a task dispatching point. Yield is a potentially blocking operation (see 9.5.1). This paragraph was deleted. Implementation Permissions An implementation is allowed to define additional resources as execution resources, and to define the corresponding allocation policies for them. Such resources may have an implementation-defined effect on task dispatching. An implementation may place implementation-defined restrictions on tasks whose active priority is in the Interrupt_Priority range. 10.1/2 For optimization purposes, an implementation may alter the points at which task dispatching occurs, in an implementation-defined manner. However, a delay_statement always corresponds to at least one task dispatching point. 11/3 12 13 14 15 NOTES 7 Clause 9 specifies under which circumstances a task becomes ready. The ready state is affected by the rules for task activation and termination, delay statements, and entry calls. When a task is not ready, it is said to be blocked. 8 An example of a possible implementation-defined execution resource is a page of physical memory, which needs to be loaded with a particular page of virtual memory before a task can continue execution. 9 The ready queues are purely conceptual; there is no requirement that such lists physically exist in an implementation. 10 While a task is running, it is not on any ready queue. Any time the task that is running on a processor is added to a ready queue, a new running task is selected for that processor. 11 In a multiprocessor system, a task can be on the ready queues of more than one processor. At the extreme, if several processors share the same set of ready tasks, the contents of their ready queues is identical, and so they can be viewed as D.2.1 The Task Dispatching Model 13 December 2012 630 Ada Reference Manual — 2012 Edition sharing one ready queue, and can be implemented that way. Thus, the dispatching model covers multiprocessors where dispatching is implemented using a single ready queue, as well as those with separate dispatching domains. 12 The priority of a task is determined by rules specified in this subclause, and under D.1, “Task Priorities”, D.3, “Priority Ceiling Locking”, and D.5, “Dynamic Priorities”. 13 The setting of a task's base priority as a result of a call to Set_Priority does not always take effect immediately when Set_Priority is called. The effect of setting the task's base priority is deferred while the affected task performs a protected action. 16 17/2 D.2.2 Task Dispatching Pragmas This subclause allows a single task dispatching policy to be defined for all priorities, or the range of priorities to be split into subranges that are assigned individual dispatching policies. 1/3 Syntax The form of a pragma Task_Dispatching_Policy is as follows: pragma Task_Dispatching_Policy(policy_identifier); The form of a pragma Priority_Specific_Dispatching is as follows: pragma Priority_Specific_Dispatching ( policy_identifier, first_priority_expression, last_priority_expression); The expected type for first_priority_expression and last_priority_expression is Integer. Name Resolution Rules 2 3 3.1/2 3.2/2 3.3/2 The policy_identifier used in a pragma Task_Dispatching_Policy shall be the name of a task dispatching policy. 4/2 Legality Rules The policy_identifier used in a pragma Priority_Specific_Dispatching shall be the name of a task dispatching policy. Both first_priority_expression and last_priority_expression shall be static expressions in the range of System.Any_Priority; last_priority_expression shall have a value greater than or equal to first_priority_- expression. Pragma Task_Dispatching_Policy specifies the single task dispatching policy. Static Semantics Pragma Priority_Specific_Dispatching specifies the task dispatching policy for the specified range of priorities. Tasks with base priorities within a Priority_Specific_Dispatching pragma have their active priorities determined according to the specified dispatching policy. Tasks with active priorities within the range of priorities specified in a Priority_Specific_Dispatching pragma are dispatched according to the specified dispatching policy. range of priorities specified the in 4.1/2 4.2/2 4.3/2 4.4/2 If a partition contains one or more Priority_Specific_Dispatching pragmas, the dispatching policy for priorities not covered by any Priority_Specific_Dispatching pragmas is FIFO_Within_Priorities. 4.5/3 A Task_Dispatching_Policy pragma is a configuration pragma. A Priority_Specific_Dispatching pragma is a configuration pragma. 5/2 Post-Compilation Rules 631 13 December 2012 The Task Dispatching Model D.2.1 Ada Reference Manual — 2012 Edition 5.1/2 5.2/2 The priority ranges specified in more than one Priority_Specific_Dispatching pragma within the same partition shall not be overlapping. If a partition contains one or more Priority_Specific_Dispatching pragmas it shall not contain a Task_Dispatching_Policy pragma. 6/2 This paragraph was deleted. Dynamic Semantics 7/2 7.1/2 7.2/3 A task dispatching policy specifies the details of task dispatching that are not covered by the basic task dispatching model. These rules govern when tasks are inserted into and deleted from the ready queues. A single is specified by a Task_Dispatching_Policy pragma. Pragma Priority_Specific_Dispatching assigns distinct dispatching policies to subranges of System.Any_Priority. task dispatching policy If neither pragma applies to any of the program units comprising a partition, the task dispatching policy for that partition is unspecified. If a partition contains one or more Priority_Specific_Dispatching pragmas, a task dispatching point occurs for the currently running task of a processor whenever there is a nonempty ready queue for that processor with a higher priority than the priority of the running task. 7.3/2 A task that has its base priority changed may move from one dispatching policy to another. It is immediately subject to the new dispatching policy. Paragraphs 7 through 13 were moved to D.2.3. 14.1/2 An implementation shall allow, for a single partition, both the locking policy (see D.3) to be specified as Ceiling_Locking and also one or more Priority_Specific_Dispatching pragmas to be given. Implementation Requirements Paragraphs 14 through 16 were moved to D.2.3. Documentation Requirements Implementation Permissions 18/2 19/2 Implementations are allowed to define other task dispatching policies, but need not support more than one task dispatching policy per partition. An implementation need not support pragma Priority_Specific_Dispatching if it is infeasible to support it in the target environment. NOTES Paragraphs 19 through 21 were deleted. D.2.3 Preemptive Dispatching 1/3 This subclause defines a preemptive task dispatching policy. 2/2 The policy_identifier FIFO_Within_Priorities is a task dispatching policy. Static Semantics 3/2 When FIFO_Within_Priorities is in effect, modifications to the ready queues occur only as follows: Dynamic Semantics D.2.2 Task Dispatching Pragmas 13 December 2012 632 Ada Reference Manual — 2012 Edition • When a blocked task becomes ready, it is added at the tail of the ready queue for its active priority. • When the active priority of a ready task that is not running changes, or the setting of its base priority takes effect, the task is removed from the ready queue for its old active priority and is added at the tail of the ready queue for its new active priority, except in the case where the active priority is lowered due to the loss of inherited priority, in which case the task is added at the head of the ready queue for its new active priority. • When the setting of the base priority of a running task takes effect, the task is added to the tail of the ready queue for its active priority. • When a task executes a delay_statement that does not result in blocking, it is added to the tail of the ready queue for its active priority. Each of the events specified above is a task dispatching point (see D.2.1). A task dispatching point occurs for the currently running task of a processor whenever there is a nonempty ready queue for that processor with a higher priority than the priority of the running task. The currently running task is said to be preempted and it is added at the head of the ready queue for its active priority. 4/2 5/2 6/2 7/2 8/2 9/2 An implementation shall allow, for a single partition, both the task dispatching policy to be specified as FIFO_Within_Priorities and also the locking policy (see D.3) to be specified as Ceiling_Locking. 10/2 Implementation Requirements Documentation Requirements Priority inversion is the duration for which a task remains at the head of the highest priority nonempty ready queue while the processor executes a lower priority task. The implementation shall document: • The maximum priority inversion a user task can experience due to activity of the implementation (on behalf of lower priority tasks), and • whether execution of a task can be preempted by the implementation processing of delay expirations for lower priority tasks, and if so, for how long. NOTES 14 If the active priority of a running task is lowered due to loss of inherited priority (as it is on completion of a protected operation) and there is a ready task of the same active priority that is not running, the running task continues to run (provided that there is no higher priority task). 11/2 12/2 13/2 14/2 15 Setting the base priority of a ready task causes the task to move to the tail of the queue for its active priority, regardless of whether the active priority of the task actually changes. 15/2 D.2.4 Non-Preemptive Dispatching This subclause defines a non-preemptive task dispatching policy. The policy_identifier Non_Preemptive_FIFO_Within_Priorities is a task dispatching policy. Static Semantics The following language-defined library package exists: package Ada.Dispatching.Non_Preemptive is pragma Preelaborate(Non_Preemptive); procedure Yield_To_Higher; procedure Yield_To_Same_Or_Higher renames Yield; end Ada.Dispatching.Non_Preemptive; 1/3 2/2 2.1/3 2.2/3 633 13 December 2012 Preemptive Dispatching D.2.3 Ada Reference Manual — 2012 Edition 2.3/3 A call of Yield_To_Higher is a task dispatching point for this policy. If the task at the head of the highest priority ready queue has a higher active priority than the calling task, then the calling task is preempted. 3/2 Non_Preemptive_FIFO_Within_Priorities shall not be specified as the policy_identifier of pragma Priority_Specific_Dispatching (see D.2.2). Legality Rules Dynamic Semantics 4/2 5/2 6/2 7/2 8/2 9/3 When Non_Preemptive_FIFO_Within_Priorities is in effect, modifications to the ready queues occur only as follows: • When a blocked task becomes ready, it is added at the tail of the ready queue for its active priority. • When the active priority of a ready task that is not running changes, or the setting of its base priority takes effect, the task is removed from the ready queue for its old active priority and is added at the tail of the ready queue for its new active priority. • When the setting of the base priority of a running task takes effect, the task is added to the tail of the ready queue for its active priority. • When a task executes a delay_statement that does not result in blocking, it is added to the tail of the ready queue for its active priority. For this policy, blocking or termination of a task, a delay_statement, a call to Yield_To_Higher, and a call to Yield_To_Same_Or_Higher or Yield are the only task dispatching points (see D.2.1). 10/2 An implementation shall allow, for a single partition, both the task dispatching policy to be specified as Non_Preemptive_FIFO_Within_Priorities and also the locking policy (see D.3) to be specified as Ceiling_Locking. Implementation Requirements Implementation Permissions 11/3 Since implementations are allowed to round all ceiling priorities in subrange System.Priority to System.Priority'Last (see D.3), an implementation may allow a task of a partition using the Non_Premptive_FIFO_Within_Priorities policy to execute within a protected object without raising its active priority provided the associated protected unit does not contain any subprograms with aspects Interrupt_Handler or Attach_Handler specified, nor does the unit have aspect Interrupt_Priority specified. When the locking policy (see D.3) is Ceiling_Locking, an implementation taking advantage of this permission shall ensure that a call to Yield_to_Higher that occurs within a protected action uses the ceiling priority of the protected object (rather than the active priority of the task) when determining whether to preempt the task. D.2.4 Non-Preemptive Dispatching 13 December 2012 634 Ada Reference Manual — 2012 Edition D.2.5 Round Robin Dispatching This subclause defines the task dispatching policy Round_Robin_Within_Priorities and the package Round_Robin. 1/3 The policy_identifier Round_Robin_Within_Priorities is a task dispatching policy. Static Semantics The following language-defined library package exists: with System; with Ada.Real_Time; package Ada.Dispatching.Round_Robin is Default_Quantum : constant Ada.Real_Time.Time_Span := implementation-defined; procedure Set_Quantum (Pri : in System.Priority; Quantum : in Ada.Real_Time.Time_Span); procedure Set_Quantum (Low, High : in System.Priority; Quantum : in Ada.Real_Time.Time_Span); function Actual_Quantum (Pri : System.Priority) return Ada.Real_Time.Time_Span; function Is_Round_Robin (Pri : System.Priority) return Boolean; end Ada.Dispatching.Round_Robin; When task dispatching policy Round_Robin_Within_Priorities is the single policy in effect for a partition, each task with priority in the range of System.Interrupt_Priority is dispatched according to policy FIFO_Within_Priorities. Dynamic Semantics The procedures Set_Quantum set the required Quantum value for a single priority level Pri or a range of priority levels Low .. High. If no quantum is set for a Round Robin priority level, Default_Quantum is used. The function Actual_Quantum returns the actual quantum used by the implementation for the priority level Pri. The function Is_Round_Robin returns True if priority Pri is covered by task dispatching policy Round_Robin_Within_Priorities; otherwise, it returns False. A call of Actual_Quantum or Set_Quantum raises exception Dispatching.Dispatching_Policy_Error if a predefined policy other than Round_Robin_Within_Priorities applies to the specified priority or any of the priorities in the specified range. For Round_Robin_Within_Priorities, the dispatching rules for FIFO_Within_Priorities apply with the following additional rules: • When a task is added or moved to the tail of the ready queue for its base priority, it has an execution time budget equal to the quantum for that priority level. This will also occur when a blocked task becomes executable again. • When a task is preempted (by a higher priority task) and is added to the head of the ready queue for its priority level, it retains its remaining budget. • While a task is executing, its budget is decreased by the amount of execution time it uses. The accuracy of this accounting is the same as that for execution time clocks (see D.14). 2/2 3/2 4/2 5/2 6/2 7/2 8/3 9/2 10/2 11/2 12/2 13/2 635 13 December 2012 Round Robin Dispatching D.2.5 Ada Reference Manual — 2012 Edition 14/2 • When a task has exhausted its budget and is without an inherited priority (and is not executing within a protected operation), it is moved to the tail of the ready queue for its priority level. This is a task dispatching point. 15/2 An implementation shall allow, for a single partition, both the task dispatching policy to be specified as Round_Robin_Within_Priorities and also the locking policy (see D.3) to be specified as Ceiling_Locking. Implementation Requirements 16/2 An implementation shall document the quantum values supported. Documentation Requirements 17/2 An implementation shall document the accuracy with which it detects the exhaustion of the budget of a task. 18/2 19/2 1/2 2/3 7/2 8/2 9/2 NOTES 16 Due to implementation constraints, the quantum value returned by Actual_Quantum might not be identical to that set with Set_Quantum. 17 A task that executes continuously with an inherited priority will not be subject to round robin dispatching. D.2.6 Earliest Deadline First Dispatching The deadline of a task is an indication of the urgency of the task; it represents a point on an ideal physical time line. The deadline might affect how resources are allocated to the task. This subclause defines a package for representing the deadline of a task and a dispatching policy that defines Earliest Deadline First (EDF) dispatching. An aspect is defined to assign an initial deadline to a task. Paragraphs 3 through 6 were moved to Annex J, “Obsolescent Features”. The policy_identifier EDF_Across_Priorities is a task dispatching policy. The following language-defined library package exists: Static Semantics with Ada.Real_Time; with Ada.Task_Identification; package Ada.Dispatching.EDF is subtype Deadline is Ada.Real_Time.Time; Default_Deadline : constant Deadline := Ada.Real_Time.Time_Last; procedure Set_Deadline (D : in Deadline; T : in Ada.Task_Identification.Task_Id := Ada.Task_Identification.Current_Task); procedure Delay_Until_And_Set_Deadline ( Delay_Until_Time : in Ada.Real_Time.Time; Deadline_Offset : in Ada.Real_Time.Time_Span); function Get_Deadline (T : Ada.Task_Identification.Task_Id := Ada.Task_Identification.Current_Task) return Deadline; end Ada.Dispatching.EDF; 9.1/3 For a task type (including the anonymous type of a single_task_declaration) or subprogram, the following language-defined representation aspect may be specified: 9.2/3 Relative_Deadline The aspect Relative_Deadline Real_Time.Time_Span. is an expression, which shall be of type D.2.5 Round Robin Dispatching 13 December 2012 636 Ada Reference Manual — 2012 Edition The Relative_Deadline aspect shall not be specified on a task interface type. Legality Rules Post-Compilation Rules If the EDF_Across_Priorities policy is specified for a partition, then the Ceiling_Locking policy (see D.3) shall also be specified for the partition. If the EDF_Across_Priorities policy appears in a Priority_Specific_Dispatching pragma (see D.2.2) in a partition, then the Ceiling_Locking policy (see D.3) shall also be specified for the partition. Dynamic Semantics The Relative_Deadline aspect has no effect if it is specified for a subprogram other than the main subprogram. The initial absolute deadline of a task for which aspect Relative_Deadline is specified is the value of Real_Time.Clock + the expression that is the value of the aspect, where this entire expression, including the call of Real_Time.Clock, is evaluated between task creation and the start of its activation. If the aspect Relative_Deadline is not specified, then the initial absolute deadline of a task is the value of Default_Deadline. The environment task is also given an initial deadline by this rule, using the value of the Relative_Deadline aspect of the main subprogram (if any). The procedure Set_Deadline changes the absolute deadline of the task to D. The function Get_Deadline returns the absolute deadline of the task. The procedure Delay_Until_And_Set_Deadline delays the calling task until time Delay_Until_Time. When the task becomes runnable again it will have deadline Delay_Until_Time + Deadline_Offset. On a system with a single processor, the setting of the deadline of a task to the new value occurs immediately at the first point that is outside the execution of a protected action. If the task is currently on a ready queue it is removed and re-entered on to the ready queue determined by the rules defined below. When EDF_Across_Priorities is specified for priority range Low..High all ready queues in this range are ordered by deadline. The task at the head of a queue is the one with the earliest deadline. A task dispatching point occurs for the currently running task T to which policy EDF_Across_Priorities applies: • when a change to the deadline of T occurs; • there is a task on the ready queue for the active priority of T with a deadline earlier than the deadline of T; or • there is a nonempty ready queue for that processor with a higher priority than the active priority of the running task. In these cases, the currently running task is said to be preempted and is returned to the ready queue for its active priority. For a task T to which policy EDF_Across_Priorities applies, the base priority is not a source of priority inheritance; the active priority when first activated or while it is blocked is defined as the maximum of the following: • • the lowest priority in the range specified as EDF_Across_Priorities that includes the base priority of T; the priorities, if any, currently inherited by T; 9.3/3 10/2 11/2 12/3 13/3 14/2 15/2 16/2 17/2 18/2 19/2 20/2 21/2 22/2 23/2 24/2 25/2 637 13 December 2012 Earliest Deadline First Dispatching D.2.6 Ada Reference Manual — 2012 Edition 26/3 • the highest priority P, if any, less than the base priority of T such that one or more tasks are executing within a protected object with ceiling priority P and task T has an earlier deadline than all such tasks; and furthermore T has an earlier deadline than all other tasks on ready queues with priorities in the given EDF_Across_Priorities range that are strictly less than P. 27/2 28/2 When a task T is first activated or becomes unblocked, it is added to the ready queue corresponding to this active priority. Until it becomes blocked again, the active priority of T remains no less than this value; it will exceed this value only while it is inheriting a higher priority. When the setting of the base priority of a ready task takes effect and the new priority is in a range specified as EDF_Across_Priorities, the task is added to the ready queue corresponding to its new active priority, as determined above. 29/2 For all the operations defined in Dispatching.EDF, Tasking_Error is raised if the task identified by T has terminated. Program_Error is raised if the value of T is Null_Task_Id. 30/2 If EDF_Across_Priorities is specified for priority range Low..High, it is a bounded error to declare a protected object with ceiling priority Low or to assign the value Low to attribute 'Priority. In either case either Program_Error is raised or the ceiling of the protected object is assigned the value Low+1. Bounded (Run-Time) Errors 31/2 If a value of Task_Id is passed as a parameter to any of the subprograms of this package and the corresponding task object no longer exists, the execution of the program is erroneous. Erroneous Execution Documentation Requirements 32/2 On a multiprocessor, the implementation shall document any conditions that cause the completion of the setting of the deadline of a task to be delayed later than what is specified for a single processor. 33/3 34/2 NOTES 18 If two adjacent priority ranges, A..B and B+1..C are specified to have policy EDF_Across_Priorities, then this is not equivalent to this policy being specified for the single range, A..C. 19 The above rules implement the preemption-level protocol (also called Stack Resource Policy protocol) for resource sharing under EDF dispatching. The preemption-level for a task is denoted by its base priority. The definition of a ceiling preemption-level for a protected object follows the existing rules for ceiling locking. D.3 Priority Ceiling Locking 1/3 This subclause specifies the interactions between priority task scheduling and protected object ceilings. This interaction is based on the concept of the ceiling priority of a protected object. The form of a pragma Locking_Policy is as follows: pragma Locking_Policy(policy_identifier); Syntax Legality Rules The policy_identifier shall either be Ceiling_Locking or an implementation-defined identifier. A Locking_Policy pragma is a configuration pragma. Post-Compilation Rules 2 3 4 5 D.2.6 Earliest Deadline First Dispatching 13 December 2012 638 Ada Reference Manual — 2012 Edition Dynamic Semantics A locking policy specifies the details of protected object locking. All protected objects have a priority. The locking policy specifies the meaning of the priority of a protected object, and the relationships between these priorities and task priorities. In addition, the policy specifies the state of a task when it executes a protected action, and how its active priority is affected by the locking. The locking policy is specified by a Locking_Policy pragma. For implementation-defined locking policies, the meaning of the priority of a protected object is implementation defined. If no Locking_Policy pragma applies to any of the program units comprising a partition, the locking policy for that partition, as well as the meaning of the priority of a protected object, are implementation defined. 6/2 The expression specified for the Priority or Interrupt_Priority aspect (see D.1) is evaluated as part of the creation of the corresponding protected object and converted to the subtype System.Any_Priority or System.Interrupt_Priority, respectively. The value of the expression is the initial priority of the corresponding protected object. If no Priority or Interrupt_Priority aspect is specified for a protected object, the initial priority is specified by the locking policy. 6.1/3 There is one predefined locking policy, Ceiling_Locking; this policy is defined as follows: • Every protected object has a ceiling priority, which is determined by either a Priority or Interrupt_Priority aspect as defined in D.1, or by assignment to the Priority attribute as described in D.5.2. The ceiling priority of a protected object (or ceiling, for short) is an upper bound on the active priority a task can have when it calls protected operations of that protected object. • The initial ceiling priority of a protected object is equal to the initial priority for that object. • If an Interrupt_Handler or Attach_Handler aspect (see C.3.1) is specified for a protected subprogram of a protected type that does not have the Interrupt_Priority aspect specified, the initial priority of protected objects of that type is implementation defined, but in the range of the subtype System.Interrupt_Priority. • If neither aspect Priority nor Interrupt_Priority is specified for a protected type, and no protected subprogram of the type has aspect Interrupt_Handler or Attach_Handler specified, then the initial priority of the corresponding protected object is System.Priority'Last. • While a task executes a protected action, it inherits the ceiling priority of the corresponding protected object. • When a task calls a protected operation, a check is made that its active priority is not higher than the ceiling of the corresponding protected object; Program_Error is raised if this check fails. Bounded (Run-Time) Errors Following any change of priority, it is a bounded error for the active priority of any task with a call queued on an entry of a protected object to be higher than the ceiling priority of the protected object. In this case one of the following applies: • at any time prior to executing the entry body Program_Error is raised in the calling task; • when the entry is open the entry body is executed at the ceiling priority of the protected object; • when the entry is open the entry body is executed at the ceiling priority of the protected object and then Program_Error is raised in the calling task; or • when the entry is open the entry body is executed at the ceiling priority of the protected object that was in effect when the entry call was queued. 7 8/3 9/2 10/3 11/3 12 13 13.1/2 13.2/2 13.3/2 13.4/2 13.5/2 639 13 December 2012 Priority Ceiling Locking D.3 Ada Reference Manual — 2012 Edition 14 15/2 16 17 18 19 20 21 22 23 Implementation Permissions The implementation is allowed to round all ceilings in a certain subrange of System.Priority or System.Interrupt_Priority up to the top of that subrange, uniformly. Implementations are allowed to define other locking policies, but need not support more than one locking policy per partition. Since implementations are allowed to place restrictions on code that runs at an interrupt-level active priority (see C.3.1 and D.2.1), the implementation may implement a language feature in terms of a protected object with an implementation-defined ceiling, but the ceiling shall be no less than Priority'Last. The implementation should use names that end with “_Locking” for implementation-defined locking policies. Implementation Advice NOTES 20 While a task executes in a protected action, it can be preempted only by tasks whose active priorities are higher than the ceiling priority of the protected object. 21 If a protected object has a ceiling priority in the range of Interrupt_Priority, certain interrupts are blocked while protected actions of that object execute. In the extreme, if the ceiling is Interrupt_Priority'Last, all blockable interrupts are blocked during that time. 22 The ceiling priority of a protected object has to be in the Interrupt_Priority range if one of its procedures is to be used as an interrupt handler (see C.3). 23 When specifying the ceiling of a protected object, one should choose a value that is at least as high as the highest active priority at which tasks can be executing when they call protected operations of that object. In determining this value the following factors, which can affect active priority, should be considered: the effect of Set_Priority, nested protected operations, entry calls, task activation, and other implementation-defined factors. 24 Attaching a protected procedure whose ceiling is below the interrupt hardware priority to an interrupt causes the execution of the program to be erroneous (see C.3.1). 25 On a single processor implementation, the ceiling priority rules guarantee that there is no possibility of deadlock involving only protected subprograms (excluding the case where a protected operation calls another protected operation on the same protected object). D.4 Entry Queuing Policies 1/3 This subclause specifies a mechanism for a user to choose an entry queuing policy. It also defines two such policies. Other policies are implementation defined. 2 3 4 The form of a pragma Queuing_Policy is as follows: pragma Queuing_Policy(policy_identifier); Syntax Legality Rules The policy_identifier shall be either FIFO_Queuing, Priority_Queuing or an implementation-defined identifier. 5 A Queuing_Policy pragma is a configuration pragma. Post-Compilation Rules D.3 Priority Ceiling Locking 13 December 2012 640 Ada Reference Manual — 2012 Edition Dynamic Semantics A queuing policy governs the order in which tasks are queued for entry service, and the order in which different entry queues are considered for service. The queuing policy is specified by a Queuing_Policy pragma. Two queuing policies, FIFO_Queuing and Priority_Queuing, are language defined. If no Queuing_Policy pragma applies to any of the program units comprising the partition, the queuing policy for that partition is FIFO_Queuing. The rules for this policy are specified in 9.5.3 and 9.7.1. The Priority_Queuing policy is defined as follows: • The calls to an entry (including a member of an entry family) are queued in an order consistent with the priorities of the calls. The priority of an entry call is initialized from the active priority of the calling task at the time the call is made, but can change later. Within the same priority, the order is consistent with the calling (or requeuing, or priority setting) time (that is, a FIFO order). • After a call is first queued, changes to the active priority of a task do not affect the priority of the call, unless the base priority of the task is set while the task is blocked on an entry call. • When the base priority of a task is set (see D.5), if the task is blocked on an entry call, and the call is queued, the priority of the call is updated to the new active priority of the calling task. This causes the call to be removed from and then reinserted in the queue at the new active priority. • When more than one condition of an entry_barrier of a protected object becomes True, and more than one of the respective queues is nonempty, the call with the highest priority is selected. If more than one such call has the same priority, the call that is queued on the entry whose declaration is first in textual order in the protected_definition is selected. For members of the same entry family, the one with the lower family index is selected. • If the expiration time of two or more open delay_alternatives is the same and no other accept_alternatives are open, the sequence_of_statements of the delay_alternative that is first in textual order in the selective_accept is executed. • When more than one alternative of a selective_accept is open and has queued calls, an alternative whose queue has the highest-priority call at its head is selected. If two or more open alternatives have equal-priority queued calls, then a call on the entry in the accept_alternative that is first in textual order in the selective_accept is selected. 6 7/2 8 9 10/1 11 12 13 14 Implementation Permissions Implementations are allowed to define other queuing policies, but need not support more than one queuing policy per partition. 15/2 Implementations are allowed to defer the reordering of entry queues following a change of base priority of a task blocked on the entry call if it is not practical to reorder the queue immediately. 15.1/2 The implementation should use names that end with “_Queuing” for implementation-defined queuing policies. 16 Implementation Advice 641 13 December 2012 Entry Queuing Policies D.4 Ada Reference Manual — 2012 Edition D.5 Dynamic Priorities 1/3 This subclause describes how the priority of an entity can be modified or queried at run time. D.5.1 Dynamic Priorities for Tasks 1/3 This subclause describes how the base priority of a task can be modified or queried at run time. The following language-defined library package exists: Static Semantics with System; with Ada.Task_Identification; -- See C.7.1 package Ada.Dynamic_Priorities is pragma Preelaborate(Dynamic_Priorities); procedure Set_Priority(Priority : in System.Any_Priority; T : in Ada.Task_Identification.Task_Id := Ada.Task_Identification.Current_Task); function Get_Priority (T : Ada.Task_Identification.Task_Id := Ada.Task_Identification.Current_Task) return System.Any_Priority; end Ada.Dynamic_Priorities; Dynamic Semantics The procedure Set_Priority sets the base priority of the specified task to the specified Priority value. Set_Priority has no effect if the task is terminated. The function Get_Priority returns T's current base priority. Tasking_Error is raised if the task is terminated. Program_Error is raised by Set_Priority and Get_Priority if T is equal to Null_Task_Id. 2 3/2 4 5 6 7 8 9 10/2 On a system with a single processor, the setting of the base priority of a task T to the new value occurs immediately at the first point when T is outside the execution of a protected action. Paragraph 11 was deleted. 12 If any subprogram in this package is called with a parameter T that specifies a task object that no longer exists, the execution of the program is erroneous. Erroneous Execution 12.1/2 On a multiprocessor, the implementation shall document any conditions that cause the completion of the setting of the priority of a task to be delayed later than what is specified for a single processor. Documentation Requirements 13 14 The implementation shall document the following metric: Metrics • The execution time of a call to Set_Priority, for the nonpreempting case, in processor clock cycles. This is measured for a call that modifies the priority of a ready task that is not running (which cannot be the calling one), where the new base priority of the affected task is lower than the active priority of the calling task, and the affected task is not on any entry queue and is not executing a protected operation. D.5 Dynamic Priorities 13 December 2012 642 Ada Reference Manual — 2012 Edition NOTES 26 Setting a task's base priority affects task dispatching. First, it can change the task's active priority. Second, under the FIFO_Within_Priorities policy it always causes the task to move to the tail of the ready queue corresponding to its active priority, even if the new base priority is unchanged. 27 Under the priority queuing policy, setting a task's base priority has an effect on a queued entry call if the task is blocked waiting for the call. That is, setting the base priority of a task causes the priority of a queued entry call from that task to be updated and the call to be removed and then reinserted in the entry queue at the new priority (see D.4), unless the call originated from the triggering_statement of an asynchronous_select. 28 The effect of two or more Set_Priority calls executed in parallel on the same task is defined as executing these calls in some serial order. 29 The rule for when Tasking_Error is raised for Set_Priority or Get_Priority is different from the rule for when Tasking_Error is raised on an entry call (see 9.5.3). In particular, querying the priority of a completed or an abnormal task is allowed, so long as the task is not yet terminated, and setting the priority of a task is allowed for any task state (including for terminated tasks). 15/2 16 17 18/3 30 Changing the priorities of a set of tasks can be performed by a series of calls to Set_Priority for each task separately. For this to work reliably, it should be done within a protected operation that has high enough ceiling priority to guarantee that the operation completes without being preempted by any of the affected tasks. 19 D.5.2 Dynamic Priorities for Protected Objects This subclause specifies how the priority of a protected object can be modified or queried at run time. Static Semantics The following attribute is defined for a prefix P that denotes a protected object: P'Priority Denotes a non-aliased component of the protected object P. This component is of type System.Any_Priority and its value is the priority of P. P'Priority denotes a variable if and only if P denotes a variable. A reference to this attribute shall appear only within the body of P. 1/3 2/2 3/2 The initial value of this attribute is the initial value of the priority of the protected object, and can be changed by an assignment. 4/2 Dynamic Semantics If the locking policy Ceiling_Locking (see D.3) is in effect, then the ceiling priority of a protected object P is set to the value of P'Priority at the end of each protected action of P. If the locking policy Ceiling_Locking is in effect, then for a protected object P with either an Attach_Handler or Interrupt_Handler aspect specified for one of its procedures, a check is made that the value to be assigned to P'Priority is in the range System.Interrupt_Priority. If the check fails, Program_Error is raised. The implementation shall document the following metric: Metrics • The difference in execution time of calls to the following procedures in protected object P: protected P is procedure Do_Not_Set_Ceiling (Pr : System.Any_Priority); procedure Set_Ceiling (Pr : System.Any_Priority); end P; 5/3 6/3 7/2 8/2 9/2 643 13 December 2012 Dynamic Priorities for Tasks D.5.1 Ada Reference Manual — 2012 Edition 10/2 11/2 protected body P is procedure Do_Not_Set_Ceiling (Pr : System.Any_Priority) is begin null; end; procedure Set_Ceiling (Pr : System.Any_Priority) is begin P'Priority := Pr; end; end P; NOTES 31 Since P'Priority is a normal variable, the value following an assignment to the attribute immediately reflects the new value even though its impact on the ceiling priority of P is postponed until completion of the protected action in which it is executed. D.6 Preemptive Abort 1/3 This subclause specifies requirements on the immediacy with which an aborted construct is completed. 2 3 4 5 6 7/2 8 9 On a system with a single processor, an aborted construct is completed immediately at the first point that is outside the execution of an abort-deferred operation. Dynamic Semantics On a multiprocessor, the implementation shall document any conditions that cause the completion of an aborted construct to be delayed later than what is specified for a single processor. Documentation Requirements The implementation shall document the following metrics: Metrics • The execution time, in processor clock cycles, that it takes for an abort_statement to cause the completion of the aborted task. This is measured in a situation where a task T2 preempts task T1 and aborts T1. T1 does not have any finalization code. T2 shall verify that T1 has terminated, by means of the Terminated attribute. • On a multiprocessor, an upper bound in seconds, on the time that the completion of an aborted task can be delayed beyond the point that it is required for a single processor. • An upper bound on the execution time of an asynchronous_select, in processor clock cycles. This is measured between a point immediately before a task T1 executes a protected operation Pr.Set that makes the condition of an entry_barrier Pr.Wait True, and the point where task T2 resumes execution immediately after an entry call to Pr.Wait in an asynchronous_select. T1 preempts T2 while T2 is executing the abortable part, and then blocks itself so that T2 can execute. The execution time of T1 is measured separately, and subtracted. • An upper bound on the execution time of an asynchronous_select, in the case that no asynchronous transfer of control takes place. This is measured between a point immediately before a task executes the asynchronous_select with a nonnull abortable part, and the point where the task continues execution immediately after it. The execution time of the abortable part is subtracted. Even though the abort_statement is included in the list of potentially blocking operations (see 9.5.1), it is recommended that this statement be implemented in a way that never requires the task executing the abort_statement to block. Implementation Advice D.5.2 Dynamic Priorities for Protected Objects 13 December 2012 644 Ada Reference Manual — 2012 Edition On a multi-processor, the delay associated with aborting a task on another processor should be bounded; the implementation should use periodic polling, if necessary, to achieve this. NOTES 32 Abortion does not change the active or base priority of the aborted task. 33 Abortion cannot be more immediate than is allowed by the rules for deferral of abortion during finalization and in protected actions. 10 11 12 D.7 Tasking Restrictions This subclause defines restrictions that can be used with a pragma Restrictions (see 13.12) to facilitate the construction of highly efficient tasking run-time systems. 1/3 The following restriction_identifiers are language defined: Static Semantics No_Task_Hierarchy No task depends on a master other than the library-level master. No_Nested_Finalization Objects of a type that needs finalization (see 7.6) are declared only at library level. If an access type does not have library-level accessibility, then there are no allocators of the type where the subtype_indication or qualified_expression needs finalization. the subtype_mark of type determined by the No_Abort_Statements There are no abort_statements, and Task_Identification.Abort_Task. there is no use of a name denoting No_Terminate_Alternatives There are no selective_accepts with terminate_alternatives. No_Task_Allocators There are no allocators for task types or types containing task subcomponents. In the case of an initialized allocator of an access type whose designated type is class-wide and limited, a check is made that the specific type of the allocated object has no task subcomponents. Program_Error is raised if this check fails. No_Implicit_Heap_Allocations There are no operations that implicitly require heap storage allocation to be performed by the implementation. The operations that implicitly require heap storage allocation are implementation defined. No_Dynamic_Priorities There are no semantic dependences on the package Dynamic_Priorities, and no occurrences of the attribute Priority. No_Dynamic_Attachment There is no use of a name denoting any of the operations defined in package Interrupts (Is_Reserved, Is_Attached, Current_Handler, Attach_Handler, Exchange_Handler, Detach_Handler, and Reference). No_Local_Protected_Objects Protected objects are declared only at library level. No_Local_Timing_Events Timing_Events are declared only at library level. 645 13 December 2012 Preemptive Abort D.6 2 3/3 4/3 5/3 6 7 7.1/3 8 9/2 10/3 10.1/3 10.2/3 Ada Reference Manual — 2012 Edition 10.3/2 No_Protected_Type_Allocators 10.4/3 There are no allocators for protected types or types containing protected type subcomponents. In the case of an initialized allocator of an access type whose designated type is class-wide and limited, a check is made that the specific type of the allocated object has no protected subcomponents. Program_Error is raised if this check fails. 10.5/3 No_Relative_Delay There are no delay_relative_statements, and there is no use of a name that denotes the Timing_Events.Set_Handler subprogram that has a Time_Span parameter. 10.6/3 No_Requeue_Statements There are no requeue_statements. 10.7/3 No_Select_Statements There are no select_statements. 10.8/3 No_Specific_Termination_Handlers There is no use of a name denoting the Set_Specific_Handler and Specific_Handler subprograms in Task_Termination. 10.9/3 Simple_Barriers The Boolean expression in each entry barrier is either a static expression or a name that statically denotes a component of the enclosing protected object. 11 12 The following restriction_parameter_identifiers are language defined: Max_Select_Alternatives Specifies the maximum number of alternatives in a selective_accept. 13 Max_Task_Entries Specifies the maximum number of entries per task. The bounds of every entry family of a task unit shall be static, or shall be defined by a discriminant of a subtype whose corresponding bound is static. A value of zero indicates that no rendezvous are possible. 14 Max_Protected_Entries Specifies the maximum number of entries per protected type. The bounds of every entry family of a protected unit shall be static, or shall be defined by a discriminant of a subtype whose corresponding bound is static. 15/2 The following restriction_identifier is language defined: 15.1/2 No_Task_Termination Dynamic Semantics All tasks are nonterminating. It is implementation-defined what happens if a task attempts to terminate. If there is a fall-back handler (see C.7.3) set for the partition it should be called when the first task attempts to terminate. 16 The following restriction_parameter_identifiers are language defined: 17/1 Max_Storage_At_Blocking Specifies the maximum portion (in storage elements) of a task's Storage_Size that can be retained by a blocked task. If an implementation chooses to detect a violation of this restriction, Storage_Error should be raised; otherwise, the behavior is implementation defined. 18/1 Max_Asynchronous_Select_Nesting Specifies the maximum dynamic nesting level of asynchronous_selects. A value of zero prevents if a program contains an the use of any asynchronous_select and, D.7 Tasking Restrictions 13 December 2012 646 Ada Reference Manual — 2012 Edition asynchronous_select, it is illegal. If an implementation chooses to detect a violation of this restriction for values other than zero, Storage_Error should be raised; otherwise, the behavior is implementation defined. Max_Tasks Specifies the maximum number of task creations that may be executed over the lifetime of a partition, not counting the creation of the environment task. A value of zero prevents any task creation and, if a program contains a task creation, it is illegal. If an implementation chooses to detect a violation of this restriction, Storage_Error should be raised; otherwise, the behavior is implementation defined. Max_Entry_Queue_Length Max_Entry_Queue_Length defines the maximum number of calls that are queued on an entry. Violation of this restriction results in the raising of Program_Error at the point of the call or requeue. No_Standard_Allocators_After_Elaboration 19/1 19.1/2 19.2/3 Specifies that an allocator using a standard storage pool (see 13.11) shall not occur within a parameterless library subprogram, nor within the handled_sequence_of_statements of a task body. For the purposes of this rule, an allocator of a type derived from a formal access type does not use a standard storage pool. At run time, Storage_Error is raised if an allocator using a standard storage pool is evaluated after the elaboration of the library_items of the partition has completed. 19.3/3 It is implementation defined whether the use of pragma Restrictions results in a reduction in executable program size, storage requirements, or execution time. If possible, the implementation should provide quantitative descriptions of such effects for each restriction. When feasible, the implementation should take advantage of the specified restrictions to produce a more efficient implementation. Implementation Advice NOTES 34 The above Storage_Checks can be suppressed with pragma Suppress. D.8 Monotonic Time This subclause specifies a high-resolution, monotonic clock package. The following language-defined library package exists: Static Semantics package Ada.Real_Time is type Time is private; Time_First : constant Time; Time_Last : constant Time; Time_Unit : constant := implementation-defined-real-number; type Time_Span is private; Time_Span_First : constant Time_Span; Time_Span_Last : constant Time_Span; Time_Span_Zero : constant Time_Span; Time_Span_Unit : constant Time_Span; Tick : constant Time_Span; function Clock return Time; 20 21 22 1/3 2 3 4 5 6 647 13 December 2012 Tasking Restrictions D.7 Ada Reference Manual — 2012 Edition 7 8 9 10 11/1 12 13 14/2 15 16 17 18 19 20 21 function "+" (Left : Time; Right : Time_Span) return Time; function "+" (Left : Time_Span; Right : Time) return Time; function "-" (Left : Time; Right : Time_Span) return Time; function "-" (Left : Time; Right : Time) return Time_Span; function "<" (Left, Right : Time) return Boolean; function "<="(Left, Right : Time) return Boolean; function ">" (Left, Right : Time) return Boolean; function ">="(Left, Right : Time) return Boolean; function "+" (Left, Right : Time_Span) return Time_Span; function "-" (Left, Right : Time_Span) return Time_Span; function "-" (Right : Time_Span) return Time_Span; function "*" (Left : Time_Span; Right : Integer) return Time_Span; function "*" (Left : Integer; Right : Time_Span) return Time_Span; function "/" (Left, Right : Time_Span) return Integer; function "/" (Left : Time_Span; Right : Integer) return Time_Span; function "abs"(Right : Time_Span) return Time_Span; This paragraph was deleted. function "<" (Left, Right : Time_Span) return Boolean; function "<="(Left, Right : Time_Span) return Boolean; function ">" (Left, Right : Time_Span) return Boolean; function ">="(Left, Right : Time_Span) return Boolean; function To_Duration (TS : Time_Span) return Duration; function To_Time_Span (D : Duration) return Time_Span; function Nanoseconds (NS : Integer) return Time_Span; function Microseconds (US : Integer) return Time_Span; function Milliseconds (MS : Integer) return Time_Span; function Seconds (S : Integer) return Time_Span; function Minutes (M : Integer) return Time_Span; type Seconds_Count is range implementation-defined; procedure Split(T : in Time; SC : out Seconds_Count; TS : out Time_Span); function Time_Of(SC : Seconds_Count; TS : Time_Span) return Time; private ... -- not specified by the language end Ada.Real_Time; In this Annex, real time is defined to be the physical time as observed in the external environment. The type Time is a time type as defined by 9.6; values of this type may be used in a delay_until_statement. Values of this type represent segments of an ideal time line. The set of values of the type Time corresponds one-to-one with an implementation-defined range of mathematical integers. The Time value I represents the half-open real time interval that starts with E+I*Time_Unit and is limited by E+(I+1)*Time_Unit, where Time_Unit is an implementation-defined real number and E is an unspecified origin point, the epoch, that is the same for all values of the type Time. It is not specified by the language whether the time values are synchronized with any standard time reference. For example, E can correspond to the time of system initialization or it can correspond to the epoch of some time standard. Values of the type Time_Span represent length of real time duration. The set of values of this type corresponds one-to-one with an implementation-defined range of mathematical integers. The Time_Span value corresponding to the integer I represents the real-time duration I*Time_Unit. Time_First and Time_Last are the smallest and largest values of the Time type, respectively. Similarly, Time_Span_First and Time_Span_Last are the smallest and largest values of the Time_Span type, respectively. 22 A value of type Seconds_Count represents an elapsed time, measured in seconds, since the epoch. D.8 Monotonic Time 13 December 2012 648 Ada Reference Manual — 2012 Edition Dynamic Semantics Time_Unit is the smallest amount of real time representable by the Time type; it is expressed in seconds. Time_Span_Unit is the difference between two successive values of the Time type. It is also the smallest positive value of type Time_Span. Time_Unit and Time_Span_Unit represent the same real time duration. A clock tick is a real time interval during which the clock value (as observed by calling the Clock function) remains constant. Tick is the average length of such intervals. The function To_Duration converts the value TS to a value of type Duration. Similarly, the function To_Time_Span converts the value D to a value of type Time_Span. For To_Duration, the result is rounded to the nearest value of type Duration (away from zero if exactly halfway between two values). If the result is outside the range of Duration, Constraint_Error is raised. For To_Time_Span, the value of D is first rounded to the nearest integral multiple of Time_Unit, away from zero if exactly halfway between two multiples. If the rounded value is outside the range of Time_Span, Constraint_Error is raised. Otherwise, the value is converted to the type Time_Span. To_Duration(Time_Span_Zero) returns 0.0, and To_Time_Span(0.0) returns Time_Span_Zero. The functions Nanoseconds, Microseconds, Milliseconds, Seconds, and Minutes convert the input parameter to a value of the type Time_Span. NS, US, MS, S, and M are interpreted as a number of nanoseconds, microseconds, milliseconds, seconds, and minutes respectively. The input parameter is first converted to seconds and rounded to the nearest integral multiple of Time_Unit, away from zero if exactly halfway between two multiples. If the rounded value is outside the range of Time_Span, Constraint_Error is raised. Otherwise, the rounded value is converted to the type Time_Span. The effects of the operators on Time and Time_Span are as for the operators defined for integer types. The function Clock returns the amount of time since the epoch. The effects of the Split and Time_Of operations are defined as follows, treating values of type Time, Time_Span, and Seconds_Count as mathematical integers. The effect of Split(T,SC,TS) is to set SC and TS to values such that T*Time_Unit = SC*1.0 + TS*Time_Unit, and 0.0 <= TS*Time_Unit < 1.0. The value returned by Time_Of(SC,TS) is the value T such that T*Time_Unit = SC*1.0 + TS*Time_Unit. Implementation Requirements The range of Time values shall be sufficient to uniquely represent the range of real times from program start-up to 50 years later. Tick shall be no greater than 1 millisecond. Time_Unit shall be less than or equal to 20 microseconds. Time_Span_First shall be no greater than –3600 seconds, and Time_Span_Last shall be no less than 3600 seconds. A clock jump is the difference between two successive distinct values of the clock (as observed by calling the Clock function). There shall be no backward clock jumps. Documentation Requirements The implementation shall document the values of Time_First, Time_Last, Time_Span_First, Time_Span_- Last, Time_Span_Unit, and Tick. The implementation shall document the properties of the underlying time base used for the clock and for type Time, such as the range of values supported and any relevant aspects of the underlying hardware or operating system facilities used. 23 24/2 25 26/2 27 28 29 30 31 32 33 34 649 13 December 2012 Monotonic Time D.8 Ada Reference Manual — 2012 Edition 35 The implementation shall document whether or not there is any synchronization with external time references, and if such synchronization exists, the sources of synchronization information, the frequency of synchronization, and the synchronization method applied. 36/3 The implementation shall document any aspects of the external environment that could interfere with the clock behavior as defined in this subclause. 37/3 For the purpose of the metrics defined in this subclause, real time is defined to be the International Atomic Time (TAI). Metrics 38 39 40 41 42 43 44 45 46 47 48 49 50/3 51 The implementation shall document the following metrics: • An upper bound on the real-time duration of a clock tick. This is a value D such that if t1 and t2 are any real times such that t1 < t2 and Clockt1 = Clockt2 then t2 – t1 <= D. • An upper bound on the size of a clock jump. • An upper bound on the drift rate of Clock with respect to real time. This is a real number D such that E*(1–D) <= (Clockt+E – Clockt) <= E*(1+D) provided that: Clockt + E*(1+D) <= Time_Last. • where Clockt is the value of Clock at time t, and E is a real time duration not less than 24 hours. The value of E used for this metric shall be reported. • An upper bound on the execution time of a call to the Clock function, in processor clock cycles. • Upper bounds on the execution times of the operators of the types Time and Time_Span, in processor clock cycles. Implementations targeted to machines with word size smaller than 32 bits need not support the full range and granularity of the Time and Time_Span types. Implementation Permissions Implementation Advice When appropriate, implementations should provide configuration mechanisms to change the value of Tick. It is recommended that Calendar.Clock and Real_Time.Clock be implemented as transformations of the same time base. It is recommended that the “best” time base which exists in the underlying system be available to the application through Clock. “Best” may mean highest accuracy or largest range. NOTES 35 The rules in this subclause do not imply that the implementation can protect the user from operator or installation errors which could result in the clock being set incorrectly. 36 Time_Unit is the granularity of the Time type. In contrast, Tick represents the granularity of Real_Time.Clock. There is no requirement that these be the same. D.8 Monotonic Time 13 December 2012 650 Ada Reference Manual — 2012 Edition D.9 Delay Accuracy This subclause specifies performance requirements for the delay_statement. The rules apply both to delay_relative_statement and to delay_until_statement. Similarly, they apply equally to a simple delay_- statement and to one which appears in a delay_alternative. 1/3 Dynamic Semantics The effect of the delay_statement for Real_Time.Time is defined in terms of Real_Time.Clock: • If C1 is a value of Clock read before a task executes a delay_relative_statement with duration D, and C2 is a value of Clock read after the task resumes execution following that delay_statement, then C2 – C1 >= D. • If C is a value of Clock read after a task resumes execution following a delay_until_statement with Real_Time.Time value T, then C >= T. A simple delay_statement with a negative or zero value for the expiration time does not cause the calling task to be blocked; it is nevertheless a potentially blocking operation (see 9.5.1). When a delay_statement appears in a delay_alternative of a timed_entry_call the selection of the entry call is attempted, regardless of the specified expiration time. When a delay_statement appears in a select_alternative, and a call is queued on one of the open entries, the selection of that entry call proceeds, regardless of the value of the delay expression. Documentation Requirements implementation shall document The delay_relative_statement that causes the task to actually be blocked. the minimum value of the delay expression of a The implementation shall document the minimum difference between the value of the delay expression of a delay_until_statement and the value of Real_Time.Clock, that causes the task to actually be blocked. The implementation shall document the following metrics: Metrics • An upper bound on the execution time, in processor clock cycles, of a delay_relative_statement whose requested value of the delay expression is less than or equal to zero. • An upper bound on the execution time, in processor clock cycles, of a delay_until_statement whose requested value of the delay expression is less than or equal to the value of Real_Time.Clock at the time of executing the statement. Similarly, for Calendar.Clock. • An upper bound on the lateness of a delay_relative_statement, for a positive value of the delay expression, in a situation where the task has sufficient priority to preempt the processor as soon as it becomes ready, and does not need to wait for any other execution resources. The upper bound is expressed as a function of the value of the delay expression. The lateness is obtained by subtracting the value of the delay expression from the actual duration. The actual duration is measured from a point immediately before a task executes the delay_statement to a point immediately after the task resumes execution following this statement. • An upper bound on the lateness of a delay_until_statement, in a situation where the value of the requested expiration time is after the time the task begins executing the statement, the task has sufficient priority to preempt the processor as soon as it becomes ready, and it does not need to wait for any other execution resources. The upper bound is expressed as a function of the difference between the requested expiration time and the clock value at the time the statement begins execution. The lateness of a delay_until_statement is obtained by subtracting the 651 13 December 2012 Delay Accuracy D.9 2 3 4 5 6/3 7 8 9 10 11 12 13 Ada Reference Manual — 2012 Edition requested expiration time from the real time that the task resumes execution following this statement. D.10 Synchronous Task Control 1/3 This subclause describes a language-defined private semaphore (suspension object), which can be used for two-stage suspend operations and as a simple building block for implementing higher-level queues. 2 3/2 4 The following language-defined package exists: Static Semantics package Ada.Synchronous_Task_Control is pragma Preelaborate(Synchronous_Task_Control); type Suspension_Object is limited private; procedure Set_True(S : in out Suspension_Object); procedure Set_False(S : in out Suspension_Object); function Current_State(S : Suspension_Object) return Boolean; procedure Suspend_Until_True(S : in out Suspension_Object); private ... -- not specified by the language end Ada.Synchronous_Task_Control; 5 The type Suspension_Object is a by-reference type. 5.1/3 5.2/3 6/2 7/2 The following language-defined package exists: package Ada.Synchronous_Task_Control.EDF is procedure Suspend_Until_True_And_Set_Deadline (S : in out Suspension_Object; TS : in Ada.Real_Time.Time_Span); end Ada.Synchronous_Task_Control.EDF; Dynamic Semantics An object of the type Suspension_Object has two visible states: True and False. Upon initialization, its value is set to False. The operations Set_True and Set_False are atomic with respect to each other and with respect to Suspend_Until_True; they set the state to True and False respectively. 8 Current_State returns the current state of the object. 9/2 10 10.1/3 The procedure Suspend_Until_True blocks the calling task until the state of the object S is True; at that point the task becomes ready and the state of the object becomes False. Program_Error is raised upon calling Suspend_Until_True if another task is already waiting on that suspension object. Suspend_Until_True is a potentially blocking operation (see 9.5.1). The procedure Suspend_Until_True_And_Set_Deadline blocks the calling task until the state of the object S is True; at that point the task becomes ready with a deadline of Ada.Real_Time.Clock + TS, and the state calling Suspend_Until_True_And_Set_Deadline if another task is already waiting on that suspension object. Suspend_Until_True_And_Set_Deadline is a potentially blocking operation. Program_Error becomes object raised False. upon the of is 11 The implementation is required to allow the calling of Set_False and Set_True during any protected action, even one that has its ceiling priority in the Interrupt_Priority range. Implementation Requirements D.9 Delay Accuracy 13 December 2012 652 Ada Reference Manual — 2012 Edition NOTES 37 More complex schemes, such as setting the deadline relative to when Set_True is called, can be programmed using a protected object. 12/3 D.10.1 Synchronous Barriers This subclause introduces a language-defined package to synchronously release a group of tasks after the number of blocked tasks reaches a specified count value. 1/3 Static Semantics The following language-defined library package exists: package Ada.Synchronous_Barriers is pragma Preelaborate(Synchronous_Barriers); subtype Barrier_Limit is Positive range 1 .. implementation-defined; type Synchronous_Barrier (Release_Threshold : Barrier_Limit) is limited private; procedure Wait_For_Release (The_Barrier : in out Synchronous_Barrier; Notified : out Boolean); private -- not specified by the language end Ada.Synchronous_Barriers; Type Synchronous_Barrier needs finalization (see 7.6). Dynamic Semantics Each call to Wait_For_Release blocks the calling task until the number of blocked tasks associated with the Synchronous_Barrier object is equal to Release_Threshold, at which time all blocked tasks are released. Notified is set to True for one of the released tasks, and set to False for all other released tasks. The mechanism for determining which task sets Notified to True is implementation defined. Once all tasks have been released, a Synchronous_Barrier object may be reused to block another Release_Threshold number of tasks. As the first step of the finalization of a Synchronous_Barrier, each blocked task is unblocked and Program_Error is raised at the place of the call to Wait_For_Release. It is implementation defined whether an abnormal task which is waiting on a Synchronous_Barrier object is aborted immediately or aborted when the tasks waiting on the object are released. Wait_For_Release is a potentially blocking operation (see 9.5.1). Bounded (Run-Time) Errors It is a bounded error to call Wait_For_Release on a Synchronous_Barrier object after that object is finalized. If the error is detected, Program_Error is raised. Otherwise, the call proceeds normally, which may leave a task blocked forever. 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 14/3 15/3 653 13 December 2012 Synchronous Task Control D.10 Ada Reference Manual — 2012 Edition D.11 Asynchronous Task Control 1/3 This subclause introduces a language-defined package to do asynchronous suspend/resume on tasks. It uses a conceptual held priority value to represent the task's held state. 2 3/2 4/2 The following language-defined library package exists: Static Semantics with Ada.Task_Identification; package Ada.Asynchronous_Task_Control is pragma Preelaborate(Asynchronous_Task_Control); procedure Hold(T : in Ada.Task_Identification.Task_Id); procedure Continue(T : in Ada.Task_Identification.Task_Id); function Is_Held(T : Ada.Task_Identification.Task_Id) return Boolean; end Ada.Asynchronous_Task_Control; Dynamic Semantics After the Hold operation has been applied to a task, the task becomes held. For each processor there is a conceptual idle task, which is always ready. The base priority of the idle task is below System.Any_- Priority'First. The held priority is a constant of the type Integer whose value is below the base priority of the idle task. 4.1/2 For any priority below System.Any_Priority'First, the task dispatching policy is FIFO_Within_Priorities. 5/2 6/2 7 8 9 10 11 12 13 14 15 16 The Hold operation sets the state of T to held. For a held task, the active priority is reevaluated as if the base priority of the task were the held priority. The Continue operation resets the state of T to not-held; its active priority is then reevaluated as determined by the task dispatching policy associated with its base priority. The Is_Held function returns True if and only if T is in the held state. As part of these operations, a check is made that the task identified by T is not terminated. Tasking_Error is raised if the check fails. Program_Error is raised if the value of T is Null_Task_Id. If any operation in this package is called with a parameter T that specifies a task object that no longer exists, the execution of the program is erroneous. Erroneous Execution Implementation Permissions An implementation need not support Asynchronous_Task_Control if it is infeasible to support it in the target environment. NOTES 38 It is a consequence of the priority rules that held tasks cannot be dispatched on any processor in a partition (unless they are inheriting priorities) since their priorities are defined to be below the priority of any idle task. 39 The effect of calling Get_Priority and Set_Priority on a Held task is the same as on any other task. 40 Calling Hold on a held task or Continue on a non-held task has no effect. 41 The rules affecting queuing are derived from the above rules, in addition to the normal priority rules: • When a held task is on the ready queue, its priority is so low as to never reach the top of the queue as long as there are other tasks on that queue. • If a task is executing in a protected action, inside a rendezvous, or is inheriting priorities from other sources (e.g. when activated), it continues to execute until it is no longer executing the corresponding construct. D.11 Asynchronous Task Control 13 December 2012 654 Ada Reference Manual — 2012 Edition • • If a task becomes held while waiting (as a caller) for a rendezvous to complete, the active priority of the accepting task is not affected. If a task becomes held while waiting in a selective_accept, and an entry call is issued to one of the open entries, the corresponding accept_alternative executes. When the rendezvous completes, the active priority of the accepting task is lowered to the held priority (unless it is still inheriting from other sources), and the task does not execute until another Continue. 17 18/1 • The same holds if the held task is the only task on a protected entry queue whose barrier becomes open. The 19 corresponding entry body executes. D.12 Other Optimizations and Determinism Rules This subclause describes various requirements for improving the response and determinism in a real-time system. 1/3 Implementation Requirements If the implementation blocks interrupts (see C.3) not as a result of direct user action (e.g. an execution of a protected action) there shall be an upper bound on the duration of this blocking. The implementation shall recognize entry-less protected types. The overhead of acquiring the execution resource of an object of such a type (see 9.5.1) shall be minimized. In particular, there should not be any overhead due to evaluating entry_barrier conditions. Unchecked_Deallocation shall be supported for terminated tasks that are designated by access types, and shall have the effect of releasing all the storage associated with the task. This includes any run-time system or heap storage that has been implicitly allocated for the task by the implementation. The implementation shall document the upper bound on the duration of interrupt blocking caused by the implementation. If this is different for different interrupts or interrupt priority levels, it should be documented for each case. Documentation Requirements The implementation shall document the following metric: Metrics • The overhead associated with obtaining a mutual-exclusive access to an entry-less protected object. This shall be measured in the following way: For a protected object of the form: protected Lock is procedure Set; function Read return Boolean; private Flag : Boolean := False; end Lock; protected body Lock is procedure Set is begin Flag := True; end Set; function Read return Boolean Begin return Flag; end Read; end Lock; 2 3 4 5 6 7 8 9 10 655 13 December 2012 Asynchronous Task Control D.11 Ada Reference Manual — 2012 Edition 11 The execution time, in processor clock cycles, of a call to Set. This shall be measured between the point just before issuing the call, and the point just after the call completes. The function Read shall be called later to verify that Set was indeed called (and not optimized away). The calling task shall have sufficiently high priority as to not be preempted during the measurement period. The protected object shall have sufficiently high ceiling priority to allow the task to call Set. 12 For a multiprocessor, if supported, the metric shall be reported for the case where no contention (on the execution resource) exists from tasks executing on other processors. D.13 The Ravenscar Profile 1/3 This subclause defines the Ravenscar profile. Paragraphs 2 and 3 were moved to 13.12, “Pragma Restrictions and Pragma Profile”. 4/3 The profile_identifier Ravenscar is a usage profile (see 13.12). For usage profile Ravenscar, there shall be no profile_pragma_argument_associations. Legality Rules 5/3 6/3 The usage profile Ravenscar is equivalent to the following set of pragmas: Static Semantics pragma Task_Dispatching_Policy (FIFO_Within_Priorities); pragma Locking_Policy (Ceiling_Locking); pragma Detect_Blocking; pragma Restrictions ( No_Abort_Statements, No_Dynamic_Attachment, No_Dynamic_Priorities, No_Implicit_Heap_Allocations, No_Local_Protected_Objects, No_Local_Timing_Events, No_Protected_Type_Allocators, No_Relative_Delay, No_Requeue_Statements, No_Select_Statements, No_Specific_Termination_Handlers, No_Task_Allocators, No_Task_Hierarchy, No_Task_Termination, Simple_Barriers, Max_Entry_Queue_Length => 1, Max_Protected_Entries => 1, Max_Task_Entries => 0, No_Dependence => Ada.Asynchronous_Task_Control, No_Dependence => Ada.Calendar, No_Dependence => Ada.Execution_Time.Group_Budgets, No_Dependence => Ada.Execution_Time.Timers, No_Dependence => Ada.Task_Attributes, No_Dependence => System.Multiprocessors.Dispatching_Domains); Paragraph 7 was deleted. 8/3 A task shall only be on the ready queues of one processor, and the processor to which a task belongs shall be defined statically. Whenever a task running on a processor reaches a task dispatching point, it goes back to the ready queues of the same processor. A task with a CPU value of Not_A_Specific_CPU will Implementation Requirements D.12 Other Optimizations and Determinism Rules 13 December 2012 656 Ada Reference Manual — 2012 Edition execute on an implementation defined processor. A task without a CPU aspect will activate and execute on the same processor as its activating task. Implementation Advice On a multiprocessor system, an implementation should support a fully partitioned approach. Each processor should have separate and disjoint ready queues. 9/3 NOTES 42 The effect of the Max_Entry_Queue_Length => 1 restriction applies only to protected entry queues due to the accompanying restriction of Max_Task_Entries => 0. 10/3 D.14 Execution Time This subclause describes a language-defined package to measure execution time. The following language-defined library package exists: Static Semantics with Ada.Task_Identification; with Ada.Real_Time; use Ada.Real_Time; package Ada.Execution_Time is type CPU_Time is private; CPU_Time_First : constant CPU_Time; CPU_Time_Last : constant CPU_Time; CPU_Time_Unit : constant := implementation-defined-real-number; CPU_Tick : constant Time_Span; function Clock (T : Ada.Task_Identification.Task_Id := Ada.Task_Identification.Current_Task) return CPU_Time; function "+" (Left : CPU_Time; Right : Time_Span) return CPU_Time; function "+" (Left : Time_Span; Right : CPU_Time) return CPU_Time; function "-" (Left : CPU_Time; Right : Time_Span) return CPU_Time; function "-" (Left : CPU_Time; Right : CPU_Time) return Time_Span; function "<" (Left, Right : CPU_Time) return Boolean; function "<=" (Left, Right : CPU_Time) return Boolean; function ">" (Left, Right : CPU_Time) return Boolean; function ">=" (Left, Right : CPU_Time) return Boolean; procedure Split (T : in CPU_Time; SC : out Seconds_Count; TS : out Time_Span); function Time_Of (SC : Seconds_Count; TS : Time_Span := Time_Span_Zero) return CPU_Time; Interrupt_Clocks_Supported : constant Boolean := implementation-defined; Separate_Interrupt_Clocks_Supported : constant Boolean := implementation-defined; function Clock_For_Interrupts return CPU_Time; private ... -- not specified by the language end Ada.Execution_Time; The execution time or CPU time of a given task is defined as the time spent by the system executing that task, including the time spent executing run-time or system services on its behalf. The mechanism used to measure execution time is implementation defined. The Boolean constant Interrupt_Clocks_Supported is set to True if the implementation separately accounts for the execution time of interrupt handlers. If it is set to False it is implementation defined which task, if any, is charged the execution time that is consumed 657 13 December 2012 The Ravenscar Profile D.13 1/3 2/2 3/2 4/2 5/2 6/2 7/2 8/2 9/2 9.1/3 9.2/3 9.3/3 10/2 11/3 Ada Reference Manual — 2012 Edition 12/2 13/2 by interrupt handlers. The Boolean constant Separate_Interrupt_Clocks_Supported is set to True if the implementation separately accounts for the execution time of individual interrupt handlers (see D.14.3). The type CPU_Time represents the execution time of a task. The set of values of this type corresponds one-to-one with an implementation-defined range of mathematical integers. The CPU_Time value I represents the half-open execution-time interval that starts with I*CPU_Time_Unit and is limited by (I+1)*CPU_Time_Unit, where CPU_Time_Unit is an implementation-defined real number. For each task, the execution time value is set to zero at the creation of the task. 14/2 CPU_Time_First and CPU_Time_Last are the smallest and largest values of the CPU_Time type, respectively. 14.1/3 The execution time value for the function Clock_For_Interrupts is initialized to zero. Dynamic Semantics 15/2 16/2 17/2 18/2 CPU_Time_Unit is the smallest amount of execution time representable by the CPU_Time type; it is expressed in seconds. A CPU clock tick is an execution time interval during which the clock value (as observed by calling the Clock function) remains constant. CPU_Tick is the average length of such intervals. The effects of the operators on CPU_Time and Time_Span are as for the operators defined for integer types. The function Clock returns the current execution time of the task identified by T; Tasking_Error is raised if that task has terminated; Program_Error is raised if the value of T is Task_Identification.Null_Task_Id. The effects of the Split and Time_Of operations are defined as follows, treating values of type CPU_Time, Time_Span, and Seconds_Count as mathematical integers. The effect of Split (T, SC, TS) is to set SC and TS that T*CPU_Time_Unit = SC*1.0 + TS*CPU_Time_Unit, and 0.0 <= TS*CPU_Time_Unit < 1.0. The value returned by Time_Of(SC,TS) is the execution-time value T such that T*CPU_Time_Unit=SC*1.0 + TS*CPU_Time_Unit. to values such 18.1/3 The function Clock_For_Interrupts returns the total cumulative time spent executing within all interrupt handlers. This time is not allocated to any task execution time clock. If Interrupt_Clocks_Supported is set to False the function raises Program_Error. 19/2 For a call of Clock, if the task identified by T no longer exists, the execution of the program is erroneous. Erroneous Execution 20/2 The range of CPU_Time values shall be sufficient to uniquely represent the range of execution times from the task start-up to 50 years of execution time later. CPU_Tick shall be no greater than 1 millisecond. Implementation Requirements Documentation Requirements 21/2 22/2 The implementation shall document the values of CPU_Time_First, CPU_Time_Last, CPU_Time_Unit, and CPU_Tick. The implementation shall document the properties of the underlying mechanism used to measure execution times, such as the range of values supported and any relevant aspects of the underlying hardware or operating system facilities used. D.14 Execution Time 13 December 2012 658 Ada Reference Manual — 2012 Edition The implementation shall document the following metrics: Metrics • An upper bound on the execution-time duration of a clock tick. This is a value D such that if t1 and t2 are any execution times of a given task such that t1 < t2 and Clockt1 = Clockt2 then t2 – t1 <= D. • An upper bound on the size of a clock jump. A clock jump is the difference between two successive distinct values of an execution-time clock (as observed by calling the Clock function with the same Task_Id). • An upper bound on the execution time of a call to the Clock function, in processor clock cycles. • Upper bounds on the execution times of the operators of the type CPU_Time, in processor clock cycles. 23/2 24/2 25/2 26/2 27/2 Implementations targeted to machines with word size smaller than 32 bits need not support the full range and granularity of the CPU_Time type. 28/2 Implementation Permissions When appropriate, implementations should provide configuration mechanisms to change the value of CPU_Tick. 29/2 Implementation Advice D.14.1 Execution Time Timers This subclause describes a language-defined package that provides a facility for calling a handler when a task has used a defined amount of CPU time. 1/3 The following language-defined library package exists: Static Semantics with System; package Ada.Execution_Time.Timers is type Timer (T : not null access constant Ada.Task_Identification.Task_Id) is tagged limited private; type Timer_Handler is access protected procedure (TM : in out Timer); Min_Handler_Ceiling : constant System.Any_Priority := implementation-defined; procedure Set_Handler (TM : in out Timer; In_Time : in Time_Span; Handler : in Timer_Handler); procedure Set_Handler (TM : in out Timer; At_Time : in CPU_Time; Handler : in Timer_Handler); function Current_Handler (TM : Timer) return Timer_Handler; procedure Cancel_Handler (TM : in out Timer; Cancelled : out Boolean); function Time_Remaining (TM : Timer) return Time_Span; Timer_Resource_Error : exception; private ... -- not specified by the language end Ada.Execution_Time.Timers; 2/2 3/2 4/2 5/2 6/2 7/2 8/2 9/2 10/2 659 13 December 2012 Execution Time D.14 Ada Reference Manual — 2012 Edition 11/2 12/2 13/2 14/2 15/3 16/2 17/2 18/3 19/3 20/3 21/2 The type Timer represents an execution-time event for a single task and is capable of detecting execution- time overruns. The access discriminant T identifies the task concerned. The type Timer needs finalization (see 7.6). An object of type Timer is said to be set if it is associated with a nonnull value of type Timer_Handler and cleared otherwise. All Timer objects are initially cleared. The type Timer_Handler identifies a protected procedure to be executed by the implementation when the timer expires. Such a protected procedure is called a handler. Dynamic Semantics When a Timer object is created, or upon the first call of a Set_Handler procedure with the timer as parameter, the resources required to operate an execution-time timer based on the associated execution- time clock are allocated and initialized. If this operation would exceed the available resources, Timer_Resource_Error is raised. The procedures Set_Handler associate the handler Handler with the timer TM: if Handler is null, the timer is cleared; otherwise, it is set. The first procedure Set_Handler loads the timer TM with an interval specified by the Time_Span parameter. In this mode, the timer TM expires when the execution time of the task identified by TM.T.all has increased by In_Time; if In_Time is less than or equal to zero, the timer expires immediately. The second procedure Set_Handler loads the timer TM with the absolute value specified by At_Time. In this mode, the timer TM expires when the execution time of the task identified by TM.T.all reaches At_Time; if the value of At_Time has already been reached when Set_Handler is called, the timer expires immediately. A call of a procedure Set_Handler for a timer that is already set replaces the handler and the (absolute or relative) execution time; if Handler is not null, the timer remains set. When a timer expires, the associated handler is executed, passing the timer as parameter. The initial action of the execution of the handler is to clear the event. The function Current_Handler returns the handler associated with the timer TM if that timer is set; otherwise, it returns null. The procedure Cancel_Handler clears the timer if it is set. Cancelled is assigned True if the timer was set prior to it being cleared; otherwise, it is assigned False. The function Time_Remaining returns the execution time interval that remains until the timer TM would expire, if that timer is set; otherwise, it returns Time_Span_Zero. The constant Min_Handler_Ceiling is the minimum ceiling priority required for a protected object with a handler to ensure that no ceiling violation will occur when that handler is invoked. 22/2 As part of the finalization of an object of type Timer, the timer is cleared. 23/2 For all the subprograms defined in this package, Tasking_Error is raised if the task identified by TM.T.all has terminated, and Program_Error is raised if the value of TM.T.all is Task_Identification.Null_Task_Id. 24/2 An exception propagated from a handler invoked as part of the expiration of a timer has no effect. 25/2 For a call of any of the subprograms defined in this package, if the task identified by TM.T.all no longer exists, the execution of the program is erroneous. Erroneous Execution D.14.1 Execution Time Timers 13 December 2012 660 Ada Reference Manual — 2012 Edition Implementation Requirements For a given Timer object, the implementation shall perform the operations declared in this package atomically with respect to any of these operations on the same Timer object. The replacement of a handler by a call of Set_Handler shall be performed atomically with respect to the execution of the handler. 26/2 When an object of type Timer is finalized, the system resources used by the timer shall be deallocated. 27/2 Implementation Permissions Implementations may limit the number of timers that can be defined for each task. If this limit is exceeded, then Timer_Resource_Error is raised. 28/3 NOTES 43 A Timer_Handler can be associated with several Timer objects. 29/2 D.14.2 Group Execution Time Budgets This subclause describes a language-defined package to assign execution time budgets to groups of tasks. 1/3 The following language-defined library package exists: Static Semantics with System; with System.Multiprocessors; package Ada.Execution_Time.Group_Budgets is type Group_Budget(CPU : System.Multiprocessors.CPU := System.Multiprocessors.CPU'First) is tagged limited private; type Group_Budget_Handler is access protected procedure (GB : in out Group_Budget); type Task_Array is array (Positive range <>) of Ada.Task_Identification.Task_Id; Min_Handler_Ceiling : constant System.Any_Priority := implementation-defined; procedure Add_Task (GB : in out Group_Budget; T : in Ada.Task_Identification.Task_Id); procedure Remove_Task (GB: in out Group_Budget; T : in Ada.Task_Identification.Task_Id); function Is_Member (GB : Group_Budget; T : Ada.Task_Identification.Task_Id) return Boolean; function Is_A_Group_Member (T : Ada.Task_Identification.Task_Id) return Boolean; function Members (GB : Group_Budget) return Task_Array; procedure Replenish (GB : in out Group_Budget; To : in Time_Span); procedure Add (GB : in out Group_Budget; Interval : in Time_Span); function Budget_Has_Expired (GB : Group_Budget) return Boolean; function Budget_Remaining (GB : Group_Budget) return Time_Span; procedure Set_Handler (GB : in out Group_Budget; Handler : in Group_Budget_Handler); function Current_Handler (GB : Group_Budget) return Group_Budget_Handler; procedure Cancel_Handler (GB : in out Group_Budget; Cancelled : out Boolean); Group_Budget_Error : exception; private -- not specified by the language end Ada.Execution_Time.Group_Budgets; 2/2 3/3 4/3 5/2 6/2 7/2 8/2 9/2 10/2 11/2 12/2 661 13 December 2012 Execution Time Timers D.14.1 Ada Reference Manual — 2012 Edition 13/2 14/2 15/2 16/2 17/2 18/3 19/3 20/2 21/3 22/2 23/3 24/2 25/3 26/2 27/3 The type Group_Budget represents an execution time budget to be used by a group of tasks. The type Group_Budget needs finalization (see 7.6). A task can belong to at most one group. Tasks of any priority can be added to a group. An object of type Group_Budget has an associated nonnegative value of type Time_Span known as its budget, which is initially Time_Span_Zero. The type Group_Budget_Handler identifies a protected procedure to be executed by the implementation when the budget is exhausted, that is, reaches zero. Such a protected procedure is called a handler. An object of type Group_Budget also includes a handler, which is a value of type Group_Budget_Handler. The handler of the object is said to be set if it is not null and cleared otherwise. The handler of all Group_Budget objects is initially cleared. Dynamic Semantics The procedure Add_Task adds the task identified by T to the group GB; if that task is already a member of some other group, Group_Budget_Error is raised. The procedure Remove_Task removes the task identified by T from the group GB; if that task is not a member of the group GB, Group_Budget_Error is raised. After successful execution of this procedure, the task is no longer a member of any group. The function Is_Member returns True if the task identified by T is a member of the group GB; otherwise, it returns False. The function Is_A_Group_Member returns True if the task identified by T is a member of some group; otherwise, it returns False. The function Members returns an array of values of type Task_Identification.Task_Id identifying the members of the group GB. The order of the components of the array is unspecified. The procedure Replenish loads the group budget GB with To as the Time_Span value. The exception Group_Budget_Error is raised if the Time_Span value To is nonpositive. Any execution on CPU of any member of the group of tasks results in the budget counting down, unless exhausted. When the budget becomes exhausted (reaches Time_Span_Zero), the associated handler is executed if the handler of group budget GB is set. Nevertheless, the tasks continue to execute. The procedure Add modifies the budget of the group GB. A positive value for Interval increases the budget. A negative value for Interval reduces the budget, but never below Time_Span_Zero. A zero value for Interval has no effect. A call of procedure Add that results in the value of the budget going to Time_Span_Zero causes the associated handler to be executed if the handler of the group budget GB is set. The function Budget_Has_Expired returns True if the budget of group GB is exhausted (equal to Time_Span_Zero); otherwise, it returns False. The function Budget_Remaining returns the remaining budget for the group GB. If the budget is exhausted it returns Time_Span_Zero. This is the minimum value for a budget. The procedure Set_Handler associates the handler Handler with the Group_Budget GB: if Handler is null, the handler of Group_Budget is cleared; otherwise, it is set. A call of Set_Handler for a Group_Budget that already has a handler set replaces the handler; if Handler is not null, the handler for Group_Budget remains set. The function Current_Handler returns the handler associated with the group budget GB if the handler for that group budget is set; otherwise, it returns null. D.14.2 Group Execution Time Budgets 13 December 2012 662 Ada Reference Manual — 2012 Edition The procedure Cancel_Handler clears the handler for the group budget if it is set. Cancelled is assigned True if the handler for the group budget was set prior to it being cleared; otherwise, it is assigned False. The constant Min_Handler_Ceiling is the minimum ceiling priority required for a protected object with a handler to ensure that no ceiling violation will occur when that handler is invoked. The precision of the accounting of task execution time to a Group_Budget is the same as that defined for execution-time clocks from the parent package. As part of the finalization of an object of type Group_Budget all member tasks are removed from the group identified by that object. If a task is a member of a Group_Budget when it terminates, then as part of the finalization of the task it is removed from the group. For all the operations defined in this package, Tasking_Error is raised if the task identified by T has terminated, and Program_Error is raised if the value of T is Task_Identification.Null_Task_Id. An exception propagated from a handler invoked when the budget of a group of tasks becomes exhausted has no effect. 28/3 29/2 30/2 31/2 32/3 33/2 34/2 For a call of any of the subprograms defined in this package, if the task identified by T no longer exists, the execution of the program is erroneous. 35/2 Erroneous Execution Implementation Requirements For a given Group_Budget object, the implementation shall perform the operations declared in this package atomically with respect to any of these operations on the same Group_Budget object. The replacement of a handler, by a call of Set_Handler, shall be performed atomically with respect to the execution of the handler. NOTES 44 Clearing or setting of the handler of a group budget does not change the current value of the budget. Exhaustion or loading of a budget does not change whether the handler of the group budget is set or cleared. 45 A Group_Budget_Handler can be associated with several Group_Budget objects. 36/2 37/2 38/2 D.14.3 Execution Time of Interrupt Handlers This subclause describes a language-defined package to measure the execution time of interrupt handlers. 1/3 The following language-defined library package exists: Static Semantics with Ada.Interrupts; package Ada.Execution_Time.Interrupts is function Clock (Interrupt : Ada.Interrupts.Interrupt_Id) return CPU_Time; function Supported (Interrupt : Ada.Interrupts.Interrupt_Id) return Boolean; end Ada.Execution_Time.Interrupts; The execution time or CPU time of a given interrupt Interrupt is defined as the time spent by the system executing interrupt handlers identified by Interrupt, including the time spent executing run-time or system services on its behalf. The mechanism used to measure execution time is implementation defined. Time spent executing interrupt handlers is distinct from time spent executing any task. 2/3 3/3 4/3 663 13 December 2012 Group Execution Time Budgets D.14.2 Ada Reference Manual — 2012 Edition 5/3 For each interrupt, the execution time value is initially set to zero. Dynamic Semantics 6/3 7/3 The function Clock returns the current cumulative execution time of the interrupt identified by Interrupt. If Separate_Interrupt_Clocks_Supported is set to False the function raises Program_Error. The function Supported returns True if the implementation is monitoring the execution time of the interrupt identified by Interrupt; otherwise, it returns False. For any Interrupt_Id Interrupt for which to Supported(Interrupt) returns False, Ada.Execution_Time.Time_Of(0). the function Clock(Interrupt) will return a value equal D.15 Timing Events 1/3 This subclause describes a language-defined package to allow user-defined protected procedures to be executed at a specified time without the need for a task or a delay statement. 2/2 3/2 4/2 5/2 6/2 7/2 8/2 9/2 Static Semantics The following language-defined library package exists: package Ada.Real_Time.Timing_Events is type Timing_Event is tagged limited private; type Timing_Event_Handler is access protected procedure (Event : in out Timing_Event); procedure Set_Handler (Event : in out Timing_Event; At_Time : in Time; Handler : in Timing_Event_Handler); procedure Set_Handler (Event : in out Timing_Event; In_Time : in Time_Span; Handler : in Timing_Event_Handler); function Current_Handler (Event : Timing_Event) return Timing_Event_Handler; procedure Cancel_Handler (Event : in out Timing_Event; Cancelled : out Boolean); function Time_Of_Event (Event : Timing_Event) return Time; private ... -- not specified by the language end Ada.Real_Time.Timing_Events; The type Timing_Event represents a time in the future when an event is to occur. The type Timing_Event needs finalization (see 7.6). An object of type Timing_Event is said to be set if it is associated with a nonnull value of type Timing_Event_Handler and cleared otherwise. All Timing_Event objects are initially cleared. 10/2 The type Timing_Event_Handler identifies a protected procedure to be executed by the implementation when the timing event occurs. Such a protected procedure is called a handler. Dynamic Semantics 11/3 The procedures Set_Handler associate the handler Handler with the event Event: if Handler is null, the event is cleared; otherwise, it is set. The first procedure Set_Handler sets the execution time for the event to be At_Time. The second procedure Set_Handler sets the execution time for the event to be Real_Time.Clock + In_Time. 12/2 A call of a procedure Set_Handler for an event that is already set replaces the handler and the time of execution; if Handler is not null, the event remains set. D.14.3 Execution Time of Interrupt Handlers 13 December 2012 664 Ada Reference Manual — 2012 Edition As soon as possible after the time set for the event, the handler is executed, passing the event as parameter. The handler is only executed if the timing event is in the set state at the time of execution. The initial action of the execution of the handler is to clear the event. If the Ceiling_Locking policy (see D.3) is in effect when a procedure Set_Handler is called, a check is made that the ceiling priority of Handler.all is Interrupt_Priority'Last. If the check fails, Program_Error is raised. If a procedure Set_Handler is called with zero or negative In_Time or with At_Time indicating a time in the past, then the handler is executed as soon as possible after the completion of the call of Set_Handler. The function Current_Handler returns the handler associated with the event Event if that event is set; otherwise, it returns null. The procedure Cancel_Handler clears the event if it is set. Cancelled is assigned True if the event was set prior to it being cleared; otherwise, it is assigned False. The function Time_Of_Event returns the time of the event if the event is set; otherwise, it returns Real_Time.Time_First. As part of the finalization of an object of type Timing_Event, the Timing_Event is cleared. If several timing events are set for the same time, they are executed in FIFO order of being set. An exception propagated from a handler invoked by a timing event has no effect. Implementation Requirements For a given Timing_Event object, the implementation shall perform the operations declared in this package atomically with respect to any of these operations on the same Timing_Event object. The replacement of a handler by a call of Set_Handler shall be performed atomically with respect to the execution of the handler. The implementation shall document the following metric: Metrics • An upper bound on the lateness of the execution of a handler. That is, the maximum time between the time specified for the event and when a handler is actually invoked assuming no other handler or task is executing during this interval. 13/2 14/2 15/3 16/3 17/3 18/3 19/2 20/2 21/2 22/2 23/2 24/3 Implementation Advice The protected handler procedure should be executed directly by the real-time clock interrupt mechanism. 25/2 NOTES 46 Since a call of Set_Handler is not a potentially blocking operation, it can be called from within a handler. 47 A Timing_Event_Handler can be associated with several Timing_Event objects. 26/2 27/2 665 13 December 2012 Timing Events D.15 Ada Reference Manual — 2012 Edition D.16 Multiprocessor Implementation 1/3 This subclause allows implementations on multiprocessor platforms to be configured. 2/3 3/3 4/3 5/3 6/3 7/3 Static Semantics The following language-defined library package exists: package System.Multiprocessors is pragma Preelaborate(Multiprocessors); type CPU_Range is range 0 .. implementation-defined; Not_A_Specific_CPU : constant CPU_Range := 0; subtype CPU is CPU_Range range 1 .. CPU_Range'Last; function Number_Of_CPUs return CPU; end System.Multiprocessors; A call of Number_Of_CPUs returns the number of processors available to the program. Within a given partition, each call on Number_Of_CPUs will return the same value. For a task type (including the anonymous type of a single_task_declaration) or subprogram, the following language-defined representation aspect may be specified: 8/3 CPU aspect The System.Multiprocessors.CPU_Range. CPU an is expression, which shall be of type 9/3 If the CPU aspect is specified for a subprogram, the expression shall be static. 10/3 The CPU aspect shall not be specified on a task interface type. Legality Rules Dynamic Semantics 11/3 12/3 13/3 14/3 The expression specified for the CPU aspect of a task is evaluated for each task object (see 9.1). The CPU value is then associated with the task object whose task declaration specifies the aspect. The CPU aspect has no effect if it is specified for a subprogram other than the main subprogram; the CPU value is not associated with any task. The CPU value is associated with the environment task if the CPU aspect is specified for the main subprogram. If the CPU aspect is not specified for the main subprogram it is implementation defined on which processor the environment task executes. The CPU value determines the processor on which the task will activate and execute; the task is said to be assigned to that processor. If the CPU value is Not_A_Specific_CPU, then the task is not assigned to a processor. A task without a CPU aspect specified will activate and execute on the same processor as its activating task if the activating task is assigned a processor. If the CPU value is not in the range of System.Multiprocessors.CPU_Range or is greater than Number_Of_CPUs the task is defined to have failed, and it becomes a completed task (see 9.2). D.16 Multiprocessor Implementation 13 December 2012 666 Ada Reference Manual — 2012 Edition D.16.1 Multiprocessor Dispatching Domains This subclause allows implementations on multiprocessor platforms to be partitioned into distinct dispatching domains during program startup. 1/3 The following language-defined library package exists: Static Semantics with Ada.Real_Time; with Ada.Task_Identification; package System.Multiprocessors.Dispatching_Domains is Dispatching_Domain_Error : exception; type Dispatching_Domain (<>) is limited private; System_Dispatching_Domain : constant Dispatching_Domain; function Create (First, Last : CPU) return Dispatching_Domain; function Get_First_CPU (Domain : Dispatching_Domain) return CPU; function Get_Last_CPU (Domain : Dispatching_Domain) return CPU; function Get_Dispatching_Domain (T : Ada.Task_Identification.Task_Id := Ada.Task_Identification.Current_Task) return Dispatching_Domain; procedure Assign_Task (Domain : in out Dispatching_Domain; CPU : in CPU_Range := Not_A_Specific_CPU; T : in Ada.Task_Identification.Task_Id := Ada.Task_Identification.Current_Task); procedure Set_CPU (CPU : in CPU_Range; T : in Ada.Task_Identification.Task_Id := Ada.Task_Identification.Current_Task); function Get_CPU (T : Ada.Task_Identification.Task_Id := Ada.Task_Identification.Current_Task) return CPU_Range; procedure Delay_Until_And_Set_CPU (Delay_Until_Time : in Ada.Real_Time.Time; CPU : in CPU_Range); private ... -- not specified by the language end System.Multiprocessors.Dispatching_Domains; The type Dispatching_Domain represents a series of processors on which a task may execute. Each processor is contained within exactly one Dispatching_Domain. System_Dispatching_Domain contains the processor or processors on which the environment task executes. At program start-up all processors are contained within System_Dispatching_Domain. For a task type (including the anonymous type of a single_task_declaration), the following language- defined representation aspect may be specified: Dispatching_Domain The value of aspect Dispatching_Domain is an expression, which shall be of type Dispatching_Domains.Dispatching_Domain. This aspect is the domain to which the task (or all objects of the task type) are assigned. The Dispatching_Domain aspect shall not be specified for a task interface. Legality Rules 667 13 December 2012 Multiprocessor Dispatching Domains D.16.1 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 14/3 15/3 16/3 17/3 18/3 19/3 Ada Reference Manual — 2012 Edition Dynamic Semantics 20/3 21/3 22/3 23/3 The expression specified for the Dispatching_Domain aspect of a task is evaluated for each task object (see 9.1). The Dispatching_Domain value is then associated with the task object whose task declaration specifies the aspect. If a task is not explicitly assigned to any domain, it is assigned to that of the activating task. A task always executes on some CPU in its domain. If both Dispatching_Domain and CPU are specified for a task, and the CPU value is not contained within the range of processors for the domain (and is not Not_A_Specific_CPU), the activation of the task is defined to have failed, and it becomes a completed task (see 9.2). The function Create creates and returns a Dispatching_Domain containing all the processors in the range First .. Last. These processors are removed from System_Dispatching_Domain. A call of Create will raise Dispatching_Domain_Error if any designated processor is not currently in System_Dispatching_Domain, or if the system cannot support a distinct domain over the processors identified, or if a processor has a task assigned to it, or if the allocation would leave System_Dispatching_Domain empty. A call of Create will raise Dispatching_Domain_Error if the calling task is not the environment task, or if Create is called after the call to the main subprogram. 24/3 The function Get_First_CPU returns the first CPU in Domain; Get_Last_CPU returns the last one. 25/3 The function Get_Dispatching_Domain returns the Dispatching_Domain on which the task is assigned. 26/3 27/3 28/3 29/3 A call of the procedure Assign_Task assigns task T to the CPU within Dispatching_Domain Domain. Task T can now execute only on CPU unless CPU designates Not_A_Specific_CPU, in which case it can execute on any processor within Domain. The exception Dispatching_Domain_Error is propagated if T is already assigned to a Dispatching_Domain other than System_Dispatching_Domain, or if CPU is not one of the processors of Domain (and is not Not_A_Specific_CPU). A call of Assign_Task is a task dispatching point for task T unless T is inside of a protected action, in which case the effect on task T is delayed until its next task dispatching point. If T is the Current_Task the effect is immediate if T is not inside a protected action, otherwise the effect is as soon as practical. Assigning a task to System_Dispatching_Domain that is already assigned to that domain has no effect. A call of procedure Set_CPU assigns task T to the CPU. Task T can now execute only on CPU, unless CPU designates Not_A_Specific_CPU, in which case it can execute on any processor within its Dispatching_Domain. The exception Dispatching_Domain_Error is propagated if CPU is not one of the processors of the Dispatching_Domain on which T is assigned (and is not Not_A_Specific_CPU). A call of Set_CPU is a task dispatching point for task T unless T is inside of a protected action, in which case the effect on task T is delayed until its next task dispatching point. If T is the Current_Task the effect is immediate if T is not inside a protected action, otherwise the effect is as soon as practical. The function Get_CPU returns the processor assigned to task T, or Not_A_Specific_CPU if the task is not assigned to a processor. A call of Delay_Until_And_Set_CPU delays the calling task for the designated time and then assigns the task to the specified processor when the delay expires. The exception Dispatching_Domain_Error is propagated if P is not one of the processors of the calling task's Dispatching_Domain (and is not Not_A_Specific_CPU). D.16.1 Multiprocessor Dispatching Domains 13 December 2012 668 Ada Reference Manual — 2012 Edition Implementation Requirements implementation The Delay_Until_And_Set_CPU atomically with respect dispatching_domain, processor or task. shall perform the operations Assign_Task, Set_CPU, Get_CPU and the same these operations on to any of Each dispatching domain should have separate and disjoint ready queues. Implementation Advice The implementation shall document the processor(s) on which the clock interrupt is handled and hence where delay queue and ready queue manipulations occur. For any Interrupt_Id whose handler can execute on more than one processor the implementation shall also document this set of processors. Documentation Requirements 30/3 31/3 32/3 An implementation may limit the number of dispatching domains that can be created and raise Dispatching_Domain_Error if an attempt is made to exceed this number. 33/3 Implementation Permissions 669 13 December 2012 Multiprocessor Dispatching Domains D.16.1 Ada Reference Manual — 2012 Edition Annex E (normative) Distributed Systems This Annex defines facilities for supporting the implementation of distributed systems using multiple partitions working cooperatively as part of a single Ada program. Post-Compilation Rules A distributed system is an interconnection of one or more processing nodes (a system resource that has both computational and storage capabilities), and zero or more storage nodes (a system resource that has only storage capabilities, with the storage addressable by one or more processing nodes). A distributed program comprises one or more partitions that execute independently (except when they communicate) in a distributed system. The process of mapping the partitions of a program to the nodes in a distributed system is called configuring the partitions of the program. The implementation shall provide means for explicitly assigning library units to a partition and for the configuring and execution of a program consisting of multiple partitions on a distributed system; the means are implementation defined. Implementation Requirements Implementation Permissions An implementation may require that the set of processing nodes of a distributed system be homogeneous. NOTES 1 The partitions comprising a program may be executed on differently configured distributed systems or on a nondistributed system without requiring recompilation. A distributed program may be partitioned differently from the same set of library units without recompilation. The resulting execution is semantically equivalent. 2 A distributed program retains the same type safety as the equivalent single partition program. E.1 Partitions The partitions of a distributed program are classified as either active or passive. Post-Compilation Rules An active partition is a partition as defined in 10.2. A passive partition is a partition that has no thread of control of its own, whose library units are all preelaborated, and whose data and subprograms are accessible to one or more active partitions. A passive partition shall include only library_items that either are declared pure or are shared passive (see 10.2.1 and E.2.1). An active partition shall be configured on a processing node. A passive partition shall be configured either on a storage node or on a processing node. The configuration of the partitions of a program onto a distributed system shall be consistent with the possibility for data references or calls between the partitions implied by their semantic dependences. Any reference to data or call of a subprogram across partitions is called a remote access. 1 2 3 4 5 6 7 8 1 2 3 4 5 671 13 December 2012 Distributed Systems E Ada Reference Manual — 2012 Edition Dynamic Semantics 6 7 A library_item is elaborated as part of the elaboration of each partition that includes it. If a normal library unit (see E.2) has state, then a separate copy of the state exists in each active partition that elaborates it. The state evolves independently in each such partition. An active partition terminates when its environment task terminates. A partition becomes inaccessible if it terminates or if it is aborted. An active partition is aborted when its environment task is aborted. In addition, if a partition fails during its elaboration, it becomes inaccessible to other partitions. Other implementation-defined events can also result in a partition becoming inaccessible. 8/1 For a prefix D that denotes a library-level declaration, excepting a declaration of or within a declared-pure library unit, the following attribute is defined: 9 D'Partition_Id Denotes a value of the type universal_integer that identifies the partition in which D was elaborated. If D denotes the declaration of a remote call interface library unit (see E.2.3) the given partition is the one where the body of D was elaborated. 10/2 It is a bounded error for there to be cyclic elaboration dependences between the active partitions of a single distributed program. The possible effects, in each of the partitions involved, are deadlock during elaboration, or the raising of Communication_Error or Program_Error. Bounded (Run-Time) Errors Implementation Permissions 11 12 13 14 15 16 An implementation may allow multiple active or passive partitions to be configured on a single processing node, and multiple passive partitions to be configured on a single storage node. In these cases, the scheduling policies, treatment of priorities, and management of shared resources between these partitions are implementation defined. An implementation may allow separate copies of an active partition to be configured on different processing nodes, and to provide appropriate interactions between the copies to present a consistent state of the partition to other active partitions. In an implementation, the partitions of a distributed program need not be loaded and elaborated all at the same time; they may be loaded and elaborated one at a time over an extended period of time. An implementation may provide facilities to abort and reload a partition during the execution of a distributed program. An implementation may allow the state of some of the partitions of a distributed program to persist while other partitions of the program terminate and are later reinvoked. NOTES 3 Library units are grouped into partitions after compile time, but before run time. At compile time, only the relevant library unit properties are identified using categorization pragmas. 4 The value returned by the Partition_Id attribute can be used as a parameter to implementation-provided subprograms in order to query information about the partition. E.1 Partitions 13 December 2012 672 Ada Reference Manual — 2012 Edition E.2 Categorization of Library Units Library units can be categorized according to the role they play in a distributed program. Certain restrictions are associated with each category to ensure that the semantics of a distributed program remain close to the semantics for a nondistributed program. A categorization pragma is a library unit pragma (see 10.1.5) that specifies a corresponding categorization aspect. A categorization aspect restricts the declarations, child units, or semantic dependences of the library unit to which it applies. A categorized library unit is a library unit that has a categorization aspect that is True. The pragmas Shared_Passive, Remote_Types, and Remote_Call_Interface are categorization pragmas, and the associated aspects are categorization aspects. In addition, for the purposes of this Annex, the aspect Pure (see 10.2.1) is considered a categorization aspect and the pragma Pure is considered a categorization pragma. A library package or generic library package is called a shared passive library unit if the Shared_Passive aspect of the unit is True. A library package or generic library package is called a remote types library unit if the Remote_Types aspect of the unit is True. A library unit is called a remote call interface if the Remote_Call_Interface aspect of the unit is True. A normal library unit is one for which no categorization aspect is True. The various categories of library units and the associated restrictions are described in this and the following subclauses. The categories are related hierarchically in that the library units of one category can depend semantically only on library units of that category or an earlier one in the hierarchy, except that the body of a remote types or remote call interface library unit is unrestricted, the declaration of a remote types or remote call interface library unit may depend on preelaborated normal library units that are mentioned only in private with clauses, and all categories can depend on limited views. The overall hierarchy (including declared pure) is as follows, with a lower-numbered category being “earlier in the hierarchy” in the sense of the previous paragraph: 1. Declared Pure 2. Shared Passive 3. Remote Types 4. Remote Call Interface 5. Normal (no restrictions) Paragraphs 7 through 11 were deleted. 1 2/3 3/3 4/3 5/3 6/3 6.1/3 6.2/3 6.3/3 6.4/3 6.5/3 Declared pure and shared passive library units are preelaborated. The declaration of a remote types or remote call interface library unit is required to be preelaborable. 12 Paragraph 13 was deleted. Implementations are allowed to define other categorization pragmas. 14 Implementation Permissions 673 13 December 2012 Categorization of Library Units E.2 Ada Reference Manual — 2012 Edition E.2.1 Shared Passive Library Units A shared passive library unit is used for managing global data shared between active partitions. The restrictions on shared passive library units prevent the data or tasks of one active partition from being accessible to another active partition through references implicit in objects declared in the shared passive library unit. The form of a pragma Shared_Passive is as follows: pragma Shared_Passive[(library_unit_name)]; Syntax Legality Rules A pragma Shared_Passive is used to specify that a library unit is a shared passive library unit, namely that the Shared_Passive aspect of the library unit is True. The following restrictions apply to such a library unit: • • • it shall not contain a library-level declaration of an access type that designates a class-wide type, task type, or protected type with entry_declarations. it shall depend semantically only upon declared pure or shared passive library_items; it shall be preelaborable (see 10.2.1); Notwithstanding the definition of accessibility given in 3.10.2, the declaration of a library unit P1 is not accessible from within the declarative region of a shared passive library unit P2, unless the shared passive library unit P2 depends semantically on P1. 1 2 3 4/3 5 6/3 7/1 8 9 A shared passive library unit is preelaborated. Static Semantics 10 11 1 2 3 4/3 Post-Compilation Rules A shared passive library unit shall be assigned to at most one partition within a given program. Notwithstanding the rule given in 10.2, a compilation unit in a given partition does not need (in the sense of 10.2) the shared passive library units on which it depends semantically to be included in that same partition; they will typically reside in separate passive partitions. E.2.2 Remote Types Library Units A remote types library unit supports the definition of types intended for use in communication between active partitions. The form of a pragma Remote_Types is as follows: pragma Remote_Types[(library_unit_name)]; Syntax Legality Rules A pragma Remote_Types is used to specify that a library unit is a remote types library unit, namely that the Remote_Types aspect of the library unit is True. The following restrictions apply to the declaration of such a library unit: 5 • it shall be preelaborable; E.2.1 Shared Passive Library Units 13 December 2012 674 Ada Reference Manual — 2012 Edition • • • it shall depend semantically only on declared pure library_items, shared passive library units, other remote types library units, or preelaborated normal library units that are mentioned only in private with clauses; it shall not contain the declaration of any variable within the visible part of the library unit; the full view of each type declared in the visible part of the library unit that has any available stream attributes shall support external streaming (see 13.13.2). A named access type declared in the visible part of a remote types or remote call interface library unit is called a remote access type. Such a type shall be: • an access-to-subprogram type, or • a general access type that designates a class-wide limited private type, a class-wide limited interface type, or a class-wide private extension all of whose ancestors are either private extensions, limited interface types, or limited private types. A type that is derived from a remote access type is also a remote access type. The following restrictions apply to the use of a remote access-to-subprogram type: • A value of a remote access-to-subprogram type shall be converted only to or from another (subtype-conformant) remote access-to-subprogram type; • The prefix of an Access attribute_reference that yields a value of a remote access-to- subprogram type shall statically denote a (subtype-conformant) remote subprogram. The following restrictions apply to the use of a remote access-to-class-wide type: • The primitive subprograms of the corresponding specific type shall only have access parameters if they are controlling formal parameters. The primitive functions of the corresponding specific type shall only have an access result if it is a controlling access result. Each noncontrolling formal parameter and noncontrolling result type shall support external streaming (see 13.13.2); • The corresponding specific type shall not have a primitive procedure with the Synchronization aspect specified unless the synchronization_kind is Optional (see 9.5); • A value of a remote access-to-class-wide type shall be explicitly converted only to another remote access-to-class-wide type; • A value of a remote access-to-class-wide type shall be dereferenced (or implicitly converted to an anonymous access type) only as part of a dispatching call where the value designates a controlling operand of the call (see E.4, “Remote Subprogram Calls”); • A controlling access result value for a primitive function with any controlling operands of the corresponding specific type shall either be explicitly converted to a remote access-to-class-wide type or be part of a dispatching call where the value designates a controlling operand of the call; • The Storage_Pool attribute is not defined for a remote access-to-class-wide type; the expected type for an allocator shall not be a remote access-to-class-wide type. A remote access-to-class- wide type shall not be an actual parameter for a generic formal access type. The Storage_Size attribute of a remote access-to-class-wide in an attribute_definition_clause. is not allowed type yields 0; it 6/3 7 8/2 9/3 9.1/1 9.2/3 9.3/1 10 11/2 12 13 14/3 14.1/3 15 16 16.1/3 17/2 NOTES 5 A remote types library unit need not be pure, and the types it defines may include levels of indirection implemented by using access types. User-specified Read and Write attributes (see 13.13.2) provide for sending values of such a type between active partitions, with Write marshalling the representation, and Read unmarshalling any levels of indirection. 18 6 The value of a remote access-to-class-wide limited interface can designate an object of a nonlimited type derived from the interface. 19/3 675 13 December 2012 Remote Types Library Units E.2.2 Ada Reference Manual — 2012 Edition 20/3 7 A remote access type may designate a class-wide synchronized, protected, or task interface type. 1 2 3 4 5 6 7/3 8/3 E.2.3 Remote Call Interface Library Units A remote call interface library unit can be used as an interface for remote procedure calls (RPCs) (or remote function calls) between active partitions. Syntax The form of a pragma Remote_Call_Interface is as follows: pragma Remote_Call_Interface[(library_unit_name)]; The form of a pragma All_Calls_Remote is as follows: pragma All_Calls_Remote[(library_unit_name)]; A pragma All_Calls_Remote is a library unit pragma. Legality Rules A pragma Remote_Call_Interface is used to specify that a library unit is a remote call interface (RCI), namely that the Remote_Call_Interface aspect of the library unit is True. A subprogram declared in the visible part of such a library unit, or declared by such a library unit, is called a remote subprogram. The declaration of an RCI library unit shall be preelaborable (see 10.2.1), and shall depend semantically only upon declared pure library_items, shared passive library units, remote types library units, other remote call interface library units, or preelaborated normal library units that are mentioned only in private with clauses. 9/1 In addition, the following restrictions apply to an RCI library unit: 10/1 11/1 12/1 13/3 14/3 15 16/3 17 18 • • • • • its visible part shall not contain the declaration of a variable; its visible part shall not contain the declaration of a limited type; its visible part shall not contain a nested generic_declaration; it shall not be, nor shall its visible part contain, the declaration of a subprogram for which aspect Inline is True; it shall not be, nor shall its visible part contain, a subprogram (or access-to-subprogram) declaration whose profile has a parameter or result of a type that does not support external streaming (see 13.13.2); • any public child of the library unit shall be a remote call interface library unit. A pragma All_Calls_Remote sets the All_Calls_Remote representation aspect of the library unit to which the pragma applies to the value True. If the All_Calls_Remote aspect of a library unit is True, the library unit shall be a remote call interface. Post-Compilation Rules A remote call interface library unit shall be assigned to at most one partition of a given program. A remote call interface library unit whose parent is also an RCI library unit shall be assigned only to the same partition as its parent. Notwithstanding the rule given in 10.2, a compilation unit in a given partition that semantically depends on the declaration of an RCI library unit, needs (in the sense of 10.2) only the declaration of the RCI library unit, not the body, to be included in that same partition. Therefore, the body of an RCI library unit is included only in the partition to which the RCI library unit is explicitly assigned. E.2.2 Remote Types Library Units 13 December 2012 676 Ada Reference Manual — 2012 Edition Implementation Requirements If aspect All_Calls_Remote is True for a given RCI library unit, then the implementation shall route any call to a subprogram of the RCI unit from outside the declarative region of the unit through the Partition Communication Subsystem (PCS); see E.5. Calls to such subprograms from within the declarative region of the unit are defined to be local and shall not go through the PCS. Implementation Permissions implementation need not support the An All_Calls_Remote pragma. Explicit message-based communication between active partitions can be supported as an alternative to RPC. the Remote_Call_Interface pragma or aspect nor 19/3 20/3 E.3 Consistency of a Distributed System This subclause defines attributes and rules associated with verifying the consistency of a distributed program. 1/3 Static Semantics For a prefix P that statically denotes a program unit, the following attributes are defined: P'Version Yields a value of the predefined type String that identifies the version of the compilation unit that contains the declaration of the program unit. P'Body_Version Yields a value of the predefined type String that identifies the version of the compilation unit that contains the body (but not any subunits) of the program unit. The version of a compilation unit changes whenever the compilation unit changes in a semantically significant way. This International Standard does not define the exact meaning of "semantically significant". It is unspecified whether there are other events (such as recompilation) that result in the version of a compilation unit changing. 2/1 3 4 5/1 If P is not a library unit, and P has no completion, then P'Body_Version returns the Body_Version of the innermost program unit enclosing the declaration of P. If P is a library unit, and P has no completion, then P'Body_Version returns a value that is different from Body_Version of any version of P that has a completion. 5.1/1 Bounded (Run-Time) Errors In a distributed program, a library unit is consistent if the same version of its declaration is used throughout. It is a bounded error to elaborate a partition of a distributed program that contains a compilation unit that depends on a different version of the declaration of a shared passive or RCI library unit than that included in the partition to which the shared passive or RCI library unit was assigned. As a result of this error, Program_Error can be raised in one or both partitions during elaboration; in any case, the partitions become inaccessible to one another. E.4 Remote Subprogram Calls A remote subprogram call is a subprogram call that invokes the execution of a subprogram in another partition. The partition that originates the remote subprogram call is the calling partition, and the partition that executes the corresponding subprogram body is the called partition. Some remote procedure calls are 6 1 677 13 December 2012 Remote Call Interface Library Units E.2.3 Ada Reference Manual — 2012 Edition allowed to return prior to the completion of subprogram execution. These are called asynchronous remote procedure calls. 2 3 4 5 6 There are three different ways of performing a remote subprogram call: • As a direct call on a (remote) subprogram explicitly declared in a remote call interface; • As an indirect call through a value of a remote access-to-subprogram type; • As a dispatching call with a controlling operand designated by a value of a remote access-to- class-wide type. The first way of calling corresponds to a static binding between the calling and the called partition. The latter two ways correspond to a dynamic binding between the calling and the called partition. 7/3 Remote types library units (see E.2.2) and remote call interface library units (see E.2.3) define the remote subprograms or remote access types used for remote subprogram calls. 8 9 10 11 12 13 14 15 In a dispatching call with two or more controlling operands, if one controlling operand is designated by a value of a remote access-to-class-wide type, then all shall be. Legality Rules Dynamic Semantics For the execution of a remote subprogram call, subprogram parameters (and later the results, if any) are passed using a stream-oriented representation (see 13.13.1) which is suitable for transmission between partitions. This action is called marshalling. Unmarshalling is the reverse action of reconstructing the parameters or results from the stream-oriented representation. Marshalling is performed initially as part of the remote subprogram call in the calling partition; unmarshalling is done in the called partition. After the remote subprogram completes, marshalling is performed in the called partition, and finally unmarshalling is done in the calling partition. A calling stub is the sequence of code that replaces the subprogram body of a remotely called subprogram in the calling partition. A receiving stub is the sequence of code (the “wrapper”) that receives a remote subprogram call on the called partition and invokes the appropriate subprogram body. Remote subprogram calls are executed at most once, that is, if the subprogram call returns normally, then the called subprogram's body was executed exactly once. The task executing a remote subprogram call blocks until the subprogram in the called partition returns, unless the call is asynchronous. For an asynchronous remote procedure call, the calling task can become ready before the procedure in the called partition returns. If a construct containing a remote call is aborted, the remote subprogram call is cancelled. Whether the execution of the remote subprogram is immediately aborted as a result of the cancellation is implemen- tation defined. If a remote subprogram call is received by a called partition before the partition has completed its elaboration, the call is kept pending until the called partition completes its elaboration (unless the call is cancelled by the calling partition prior to that). If an exception is propagated by a remotely called subprogram, and the call is not an asynchronous call, the corresponding exception is reraised at the point of the remote subprogram call. For an asynchronous call, if the remote procedure call returns prior to the completion of the remotely called subprogram, any exception is lost. E.4 Remote Subprogram Calls 13 December 2012 678 Ada Reference Manual — 2012 Edition The exception Communication_Error (see E.5) is raised if a remote call cannot be completed due to difficulties in communicating with the called partition. All forms of remote subprogram calls are potentially blocking operations (see 9.5.1). In a remote subprogram call with a formal parameter of a class-wide type, a check is made that the tag of the actual parameter identifies a tagged type declared in a declared-pure or shared passive library unit, or in the visible part of a remote types or remote call interface library unit. Program_Error is raised if this check fails. In a remote function call which returns a class-wide type, the same check is made on the function result. In a dispatching call with two or more controlling operands that are designated by values of a remote access-to-class-wide type, a check is made (in addition to the normal Tag_Check — see 11.5) that all the remote access-to-class-wide values originated from Access attribute_references that were evaluated by tasks of the same active partition. Constraint_Error is raised if this check fails. Implementation Requirements The implementation of remote subprogram calls shall conform to the PCS interface as defined by the specification of the language-defined package System.RPC (see E.5). The calling stub shall use the Do_RPC procedure unless the remote procedure call is asynchronous in which case Do_APC shall be used. On the receiving side, the corresponding receiving stub shall be invoked by the RPC-receiver. 16 17 18/1 19 20 With respect to shared variables in shared passive library units, the execution of the corresponding subprogram body of a synchronous remote procedure call is considered to be part of the execution of the calling task. The execution of the corresponding subprogram body of an asynchronous remote procedure call proceeds in parallel with the calling task and does not signal the next action of the calling task (see 9.10). 20.1/1 NOTES 8 A given active partition can both make and receive remote subprogram calls. Thus, an active partition can act as both a client and a server. 9 If a given exception is propagated by a remote subprogram call, but the exception does not exist in the calling partition, the exception can be handled by an others choice or be propagated to and handled by a third partition. 21 22 E.4.1 Asynchronous Remote Calls This subclause introduces the aspect Asynchronous which can be specified to allow a remote subprogram call to return prior to completion of the execution of the corresponding remote subprogram body. 1/3 Paragraphs 2 through 7 were deleted. Static Semantics For a remote procedure, the following language-defined representation aspect may be specified: 8/3 Asynchronous The type of aspect Asynchronous is Boolean. If directly specified, the aspect_definition 8.1/3 shall be a static expression. If not specified, the aspect is False. For a remote access type, the following language-defined representation aspect may be specified: 8.2/3 Asynchronous The type of aspect Asynchronous is Boolean. If directly specified, the aspect_definition 8.3/3 shall be a static expression. If not specified (including by inheritance), the aspect is False. 679 13 December 2012 Remote Subprogram Calls E.4 Ada Reference Manual — 2012 Edition 8.4/3 8.5/3 9/3 Legality Rules If aspect Asynchronous is specified for a remote procedure, the formal parameters of the procedure shall all be of mode in. If aspect Asynchronous is specified for a remote access type, the type shall be a remote access-to-class- wide type, or the type shall be a remote access-to-procedure type with the formal parameters of the designated profile of the type all of mode in. Dynamic Semantics A remote call is asynchronous if it is a call to a procedure, or a call through a value of an access-to- procedure type, for which aspect Asynchronous is True. In addition, if aspect Asynchronous is True for a remote access-to-class-wide type, then a dispatching call on a procedure with a controlling operand designated by a value of the type is asynchronous if the formal parameters of the procedure are all of mode in. 10 Asynchronous remote procedure calls shall be implemented such that the corresponding body executes at most once as a result of the call. Implementation Requirements E.4.2 Example of Use of a Remote Access-to-Class-Wide Type Example of using a remote access-to-class-wide type to achieve dynamic binding across active partitions: Examples package Tapes is pragma Pure(Tapes); type Tape is abstract tagged limited private; -- Primitive dispatching operations where -- Tape is controlling operand procedure Copy (From, To : access Tape; Num_Recs : in Natural) is abstract; procedure Rewind (T : access Tape) is abstract; -- More operations private type Tape is ... end Tapes; with Tapes; package Name_Server is pragma Remote_Call_Interface; -- Dynamic binding to remote operations is achieved -- using the access-to-limited-class-wide type Tape_Ptr type Tape_Ptr is access all Tapes.Tape'Class; -- The following statically bound remote operations -- allow for a name-server capability in this example function Find (Name : String) return Tape_Ptr; procedure Register (Name : in String; T : in Tape_Ptr); procedure Remove (T : in Tape_Ptr); -- More operations end Name_Server; package Tape_Driver is -- Declarations are not shown, they are irrelevant here end Tape_Driver; 1 2 3 4 E.4.1 Asynchronous Remote Calls 13 December 2012 680 Ada Reference Manual — 2012 Edition with Tapes, Name_Server; package body Tape_Driver is type New_Tape is new Tapes.Tape with ... procedure Copy (From, To : access New_Tape; Num_Recs: in Natural) is begin . . . end Copy; procedure Rewind (T : access New_Tape) is begin . . . end Rewind; -- Objects remotely accessible through use -- of Name_Server operations Tape1, Tape2 : aliased New_Tape; begin Name_Server.Register ("NINE-TRACK", Tape1'Access); Name_Server.Register ("SEVEN-TRACK", Tape2'Access); end Tape_Driver; with Tapes, Name_Server; -- Tape_Driver is not needed and thus not mentioned in the with_clause procedure Tape_Client is T1, T2 : Name_Server.Tape_Ptr; begin T1 := Name_Server.Find ("NINE-TRACK"); T2 := Name_Server.Find ("SEVEN-TRACK"); Tapes.Rewind (T1); Tapes.Rewind (T2); Tapes.Copy (T1, T2, 3); end Tape_Client; Notes on the example: This paragraph was deleted. • The package Tapes provides the necessary declarations of the type and its primitive operations. • Name_Server is a remote call interface package and is elaborated in a separate active partition to provide the necessary naming services (such as Register and Find) to the entire distributed program through remote subprogram calls. • Tape_Driver is a normal package that is elaborated in a partition configured on the processing node that is connected to the tape device(s). The abstract operations are overridden to support the locally declared tape devices (Tape1, Tape2). The package is not visible to its clients, but it exports the tape devices (as remote objects) through the services of the Name_Server. This allows for tape devices to be dynamically added, removed or replaced without requiring the modification of the clients' code. • The Tape_Client procedure references only declarations in the Tapes and Name_Server packages. Before using a tape for the first time, it needs to query the Name_Server for a system- wide identity for that tape. From then on, it can use that identity to access the tape device. • Values of remote access type Tape_Ptr include the necessary information to complete the remote dispatching operations that result from dereferencing the controlling operands T1 and T2. 5 6 7 8/1 9 10 11 12 13 681 13 December 2012 Example of Use of a Remote Access-to-Class-Wide Type E.4.2 Ada Reference Manual — 2012 Edition E.5 Partition Communication Subsystem 1/2 The Partition Communication Subsystem (PCS) provides facilities for supporting communication between the active partitions of a distributed program. The package System.RPC is a language-defined interface to the PCS. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 The following language-defined library package exists: Static Semantics with Ada.Streams; -- see 13.13.1 package System.RPC is type Partition_Id is range 0 .. implementation-defined; Communication_Error : exception; type Params_Stream_Type ( Initial_Size : Ada.Streams.Stream_Element_Count) is new Ada.Streams.Root_Stream_Type with private; procedure Read( Stream : in out Params_Stream_Type; Item : out Ada.Streams.Stream_Element_Array; Last : out Ada.Streams.Stream_Element_Offset); procedure Write( Stream : in out Params_Stream_Type; Item : in Ada.Streams.Stream_Element_Array); -- Synchronous call procedure Do_RPC( Partition : in Partition_Id; Params : access Params_Stream_Type; Result : access Params_Stream_Type); -- Asynchronous call procedure Do_APC( Partition : in Partition_Id; Params : access Params_Stream_Type); -- The handler for incoming RPCs type RPC_Receiver is access procedure( Params : access Params_Stream_Type; Result : access Params_Stream_Type); procedure Establish_RPC_Receiver( Partition : in Partition_Id; Receiver : in RPC_Receiver); private ... -- not specified by the language end System.RPC; A value of the type Partition_Id is used to identify a partition. An object of the type Params_Stream_Type is used for identifying the particular remote subprogram that is being called, as well as marshalling and unmarshalling the parameters or result of a remote subprogram call, as part of sending them between partitions. The Read and Write procedures override the corresponding abstract operations for the type Params_Stream_Type. The Do_RPC and Do_APC procedures send a message to the active partition identified by the Partition parameter. Dynamic Semantics E.5 Partition Communication Subsystem 13 December 2012 682 Ada Reference Manual — 2012 Edition After sending the message, Do_RPC blocks the calling task until a reply message comes back from the called partition or some error is detected by the underlying communication system in which case Communication_Error is raised at the point of the call to Do_RPC. Do_APC operates in the same way as Do_RPC except that it is allowed to return immediately after sending the message. Upon normal return, the stream designated by the Result parameter of Do_RPC contains the reply message. The procedure System.RPC.Establish_RPC_Receiver is called once, immediately after elaborating the library units of an active partition (that is, right after the elaboration of the partition) if the partition includes an RCI library unit, but prior to invoking the main subprogram, if any. The Partition parameter is the Partition_Id of the active partition being elaborated. The Receiver parameter designates an implementation-provided procedure called the RPC-receiver which will handle all RPCs received by the partition from the PCS. Establish_RPC_Receiver saves a reference to the RPC-receiver; when a message is received at the called partition, the RPC-receiver is called with the Params stream containing the message. When the RPC-receiver returns, the contents of the stream designated by Result is placed in a message and sent back to the calling partition. If a call on Do_RPC is aborted, a cancellation message is sent to the called partition, to request that the execution of the remotely called subprogram be aborted. The subprograms declared in System.RPC are potentially blocking operations. The implementation of the RPC-receiver shall be reentrant, thereby allowing concurrent calls on it from the PCS to service concurrent remote subprogram calls into the partition. Implementation Requirements 18 19 20 21 22 23 24 An implementation shall not restrict the replacement of the body of System.RPC. An implementation shall not restrict children of System.RPC. The related implementation permissions in the introduction to Annex A do not apply. 24.1/1 If the implementation of System.RPC is provided by the user, an implementation shall support remote subprogram calls as specified. 24.2/1 The implementation of the PCS shall document whether the RPC-receiver is invoked from concurrent tasks. If there is an upper limit on the number of such tasks, this limit shall be documented as well, together with the mechanisms to configure it (if this is supported). Documentation Requirements Implementation Permissions The PCS is allowed to contain implementation-defined interfaces for explicit message passing, broadcasting, etc. Similarly, it is allowed to provide additional interfaces to query the state of some remote partition (given its partition ID) or of the PCS itself, to set timeouts and retry parameters, to get more detailed error status, etc. These additional interfaces should be provided in child packages of System.RPC. A body for the package System.RPC need not be supplied by the implementation. An alternative declaration is allowed for package System.RPC as long as it provides a set of operations that is substantially equivalent to the specification defined in this subclause. 25 26 27 27.1/3 683 13 December 2012 Partition Communication Subsystem E.5 Ada Reference Manual — 2012 Edition Implementation Advice 28 29 30 Whenever possible, the PCS on the called partition should allow for multiple tasks to call the RPC- receiver with different messages and should allow them to block until the corresponding subprogram body returns. The Write operation on a stream of type Params_Stream_Type should raise Storage_Error if it runs out of space trying to write the Item into the stream. NOTES 10 The package System.RPC is not designed for direct calls by user programs. It is instead designed for use in the implementation of remote subprograms calls, being called by the calling stubs generated for a remote call interface library unit to initiate a remote call, and in turn calling back to an RPC-receiver that dispatches to the receiving stubs generated for the body of a remote call interface, to handle a remote call received from elsewhere. E.5 Partition Communication Subsystem 13 December 2012 684 Ada Reference Manual — 2012 Edition Annex F (normative) Information Systems This Annex provides a set of facilities relevant to Information Systems programming. These fall into several categories: • an attribute definition clause specifying Machine_Radix for a decimal subtype; • the package Decimal, which declares a set of constants defining the implementation's capacity for decimal types, and a generic procedure for decimal division; and • the child packages Text_IO.Editing, Wide_Text_IO.Editing, and Wide_Wide_Text_IO.Editing, which support formatted and localized output of decimal data, based on “picture String” values. See also: 3.5.9, “Fixed Point Types”; 3.5.10, “Operations of Fixed Point Types”; 4.6, “Type Conversions”; 13.3, “Operational and Representation Attributes”; A.10.9, “Input-Output for Real Types”; B.3, “Interfacing with C and C++”; B.4, “Interfacing with COBOL”; Annex G, “Numerics”. 1 2 3 4/2 5/2 The character and string handling packages in Annex A, “Predefined Language Environment” are also relevant for Information Systems. 6 Implementation Advice If COBOL (respectively, C) is widely supported in the target environment, implementations supporting the Information Systems Annex should provide the child package Interfaces.COBOL (respectively, Interfaces.C) specified in Annex B and should support a convention_identifier of COBOL (respectively, C) for the Convention aspect (see Annex B), thus allowing Ada programs to interface with programs written in that language. 7/3 F.1 Machine_Radix Attribute Definition Clause Machine_Radix may be specified for a decimal first subtype (see 3.5.9) via an attribute_definition_clause; the expression of such a clause shall be static, and its value shall be 2 or 10. A value of 2 implies a binary base range; a value of 10 implies a decimal base range. Static Semantics Packed decimal should be used as the internal representation for objects of subtype S when S'Machine_Radix = 10. Implementation Advice Example of Machine_Radix attribute definition clause: type Money is delta 0.01 digits 15; for Money'Machine_Radix use 10; Examples 1 2 3 4 685 13 December 2012 Information Systems F Ada Reference Manual — 2012 Edition F.2 The Package Decimal The library package Decimal has the following declaration: Static Semantics package Ada.Decimal is pragma Pure(Decimal); Max_Scale : constant := implementation-defined; Min_Scale : constant := implementation-defined; Min_Delta : constant := 10.0**(-Max_Scale); Max_Delta : constant := 10.0**(-Min_Scale); Max_Decimal_Digits : constant := implementation-defined; generic type Dividend_Type is delta <> digits <>; type Divisor_Type is delta <> digits <>; type Quotient_Type is delta <> digits <>; type Remainder_Type is delta <> digits <>; procedure Divide (Dividend : in Dividend_Type; Divisor : in Divisor_Type; Quotient : out Quotient_Type; Remainder : out Remainder_Type) with Convention => Intrinsic; end Ada.Decimal; Max_Scale is the largest N such that 10.0**(–N) is allowed as a decimal type's delta. Its type is universal_integer. Min_Scale is the smallest N such that 10.0**(–N) is allowed as a decimal type's delta. Its type is universal_integer. Min_Delta is the smallest value allowed for delta in a decimal_fixed_point_definition. Its type is universal_real. Max_Delta is the largest value allowed for delta in a decimal_fixed_point_definition. Its type is universal_real. Max_Decimal_Digits is the largest value allowed for digits in a decimal_fixed_point_definition. Its type is universal_integer. The effect of Divide is as follows. The value of Quotient is Quotient_Type(Dividend/Divisor). The value of Remainder is Remainder_Type(Intermediate), where Intermediate is the difference between Dividend and the product of Divisor and Quotient; this result is computed exactly. Static Semantics Implementation Requirements Decimal.Max_Decimal_Digits shall be at least 18. Decimal.Max_Scale shall be at least 18. Decimal.Min_Scale shall be at most 0. NOTES 1 The effect of division yielding a quotient with control over rounding versus truncation is obtained by applying either the function attribute Quotient_Type'Round or the conversion Quotient_Type to the expression Dividend/Divisor. F.2 The Package Decimal 13 December 2012 686 1 2 3 4 5 6/3 7 8 9 10 11 12 13 14 15 16 17 Ada Reference Manual — 2012 Edition F.3 Edited Output for Decimal Types The child packages Text_IO.Editing, Wide_Text_IO.Editing, and Wide_Wide_Text_IO.Editing provide localizable formatted text output, known as edited output, for decimal types. An edited output string is a function of a numeric value, program-specifiable locale elements, and a format control value. The numeric value is of some decimal type. The locale elements are: • • • • the currency string; the digits group separator character; the radix mark character; and the fill character that replaces leading zeros of the numeric value. For Text_IO.Editing the edited output and currency strings are of type String, and the locale characters are of type Character. For Wide_Text_IO.Editing their types are Wide_String and Wide_Character, respectively. For Wide_Wide_Text_IO.Editing their types are Wide_Wide_String and Wide_Wide_- Character, respectively. Each of the locale elements has a default value that can be replaced or explicitly overridden. A format-control value is of the private type Picture; it determines the composition of the edited output string and controls the form and placement of the sign, the position of the locale elements and the decimal digits, the presence or absence of a radix mark, suppression of leading zeros, and insertion of particular character values. A Picture object is composed from a String value, known as a picture String, that serves as a template for the edited output string, and a Boolean value that controls whether a string of all space characters is produced when the number's value is zero. A picture String comprises a sequence of one- or two-Character symbols, each serving as a placeholder for a character or string at a corresponding position in the edited output string. The picture String symbols fall into several categories based on their effect on the edited output string: Decimal Digit: Radix Control: Sign Control: Currency Control: Zero Suppression: Simple Insertion: '9' '.' '+' '$' 'Z' '_' 'V' '–' '#' '*' 'B' '<' '>' "CR" "DB" '0' '/' The entries are not case-sensitive. Mixed- or lower-case forms for "CR" and "DB", and lower-case forms for 'V', 'Z', and 'B', have the same effect as the upper-case symbols shown. An occurrence of a '9' Character in the picture String represents a decimal digit position in the edited output string. A radix control Character in the picture String indicates the position of the radix mark in the edited output string: an actual character position for '.', or an assumed position for 'V'. A sign control Character in the picture String affects the form of the sign in the edited output string. The '<' and '>' Character values indicate parentheses for negative values. A Character '+', '–', or '<' appears either singly, signifying a fixed-position sign in the edited output, or repeated, signifying a floating- position sign that is preceded by zero or more space characters and that replaces a leading 0. 1/2 2 3 4 5 6/2 7 8 9 10 11 12 13 14 687 13 December 2012 Edited Output for Decimal Types F.3 Ada Reference Manual — 2012 Edition A currency control Character in the picture String indicates an occurrence of the currency string in the edited output string. The '$' Character represents the complete currency string; the '#' Character represents one character of the currency string. A '$' Character appears either singly, indicating a fixed-position currency string in the edited output, or repeated, indicating a floating-position currency string that occurs in place of a leading 0. A sequence of '#' Character values indicates either a fixed- or floating-position currency string, depending on context. A zero suppression Character in the picture String allows a leading zero to be replaced by either the space character (for 'Z') or the fill character (for '*'). A simple insertion Character in the picture String represents, in general, either itself (if '/' or '0'), the space character (if 'B'), or the digits group separator character (if '_'). In some contexts it is treated as part of a floating sign, floating currency, or zero suppression string. An example of a picture String is "<###Z_ZZ9.99>". If the currency string is "kr", the separator character is ',', and the radix mark is '.' then the edited output string values for the decimal values 32.10 and – 5432.10 are "bbkrbbb32.10b" and "(bkr5,432.10)", respectively, where 'b' indicates the space character. generic and The Wide_Wide_Text_IO.Decimal_IO (see A.10.9, “Input-Output for Real Types”) provide text input and nonedited text output for decimal types. Wide_Text_IO.Decimal_IO, Text_IO.Decimal_IO, packages NOTES 2 A picture String is of Wide_Wide_Text_IO.Editing. type Standard.String, for all of Text_IO.Editing, Wide_Text_IO.Editing, and 15 16 17 18/2 19/2 20/2 F.3.1 Picture String Formation 1/3 A well-formed picture String, or simply picture String, is a String value that conforms to the syntactic rules, composition constraints, and character replication conventions specified in this subclause. Dynamic Semantics 2/1 This paragraph was deleted. 3 picture_string ::= fixed_$_picture_string | fixed_#_picture_string | floating_currency_picture_string | non_currency_picture_string F.3 Edited Output for Decimal Types 13 December 2012 688 Ada Reference Manual — 2012 Edition fixed_$_picture_string ::= [fixed_LHS_sign] fixed_$_char {direct_insertion} [zero_suppression] number [RHS_sign] | [fixed_LHS_sign {direct_insertion}] [zero_suppression] number fixed_$_char {direct_insertion} [RHS_sign] | floating_LHS_sign number fixed_$_char {direct_insertion} [RHS_sign] | [fixed_LHS_sign] fixed_$_char {direct_insertion} all_zero_suppression_number {direct_insertion} [RHS_sign] | [fixed_LHS_sign {direct_insertion}] all_zero_suppression_number {direct_insertion} fixed_$_char {direct_insertion} [RHS_sign] | all_sign_number {direct_insertion} fixed_$_char {direct_insertion} [RHS_sign] fixed_#_picture_string ::= [fixed_LHS_sign] single_#_currency {direct_insertion} [zero_suppression] number [RHS_sign] | [fixed_LHS_sign] multiple_#_currency {direct_insertion} zero_suppression number [RHS_sign] | [fixed_LHS_sign {direct_insertion}] [zero_suppression] number fixed_#_currency {direct_insertion} [RHS_sign] | floating_LHS_sign number fixed_#_currency {direct_insertion} [RHS_sign] | [fixed_LHS_sign] single_#_currency {direct_insertion} all_zero_suppression_number {direct_insertion} [RHS_sign] | [fixed_LHS_sign] multiple_#_currency {direct_insertion} all_zero_suppression_number {direct_insertion} [RHS_sign] | [fixed_LHS_sign {direct_insertion}] all_zero_suppression_number {direct_insertion} fixed_#_currency {direct_insertion} [RHS_sign] | all_sign_number {direct_insertion} fixed_#_currency {direct_insertion} [RHS_sign] floating_currency_picture_string ::= [fixed_LHS_sign] {direct_insertion} floating_$_currency number [RHS_sign] | [fixed_LHS_sign] {direct_insertion} floating_#_currency number [RHS_sign] | [fixed_LHS_sign] {direct_insertion} all_currency_number {direct_insertion} [RHS_sign] 4 5 6 689 13 December 2012 Picture String Formation F.3.1 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Ada Reference Manual — 2012 Edition non_currency_picture_string ::= [fixed_LHS_sign {direct_insertion}] zero_suppression number [RHS_sign] | [floating_LHS_sign] number [RHS_sign] | [fixed_LHS_sign {direct_insertion}] all_zero_suppression_number {direct_insertion} [RHS_sign] | all_sign_number {direct_insertion} | fixed_LHS_sign direct_insertion {direct_insertion} number [RHS_sign] fixed_LHS_sign ::= LHS_Sign LHS_Sign ::= + | – | < fixed_$_char ::= $ direct_insertion ::= simple_insertion simple_insertion ::= _ | B | 0 | / zero_suppression ::= Z {Z | context_sensitive_insertion} | fill_string context_sensitive_insertion ::= simple_insertion fill_string ::= * {* | context_sensitive_insertion} number ::= fore_digits [radix [aft_digits] {direct_insertion}] | radix aft_digits {direct_insertion} fore_digits ::= 9 {9 | direct_insertion} aft_digits ::= {9 | direct_insertion} 9 radix ::= . | V RHS_sign ::= + | – | > | CR | DB floating_LHS_sign ::= LHS_Sign {context_sensitive_insertion} LHS_Sign {LHS_Sign | context_sensitive_insertion} single_#_currency ::= # multiple_#_currency ::= ## {#} fixed_#_currency ::= single_#_currency | multiple_#_currency floating_$_currency ::= $ {context_sensitive_insertion} $ {$ | context_sensitive_insertion} floating_#_currency ::= # {context_sensitive_insertion} # {# | context_sensitive_insertion} all_sign_number ::= all_sign_fore [radix [all_sign_aft]] [>] F.3.1 Picture String Formation 13 December 2012 690 all_sign_fore ::= sign_char {context_sensitive_insertion} sign_char {sign_char | context_sensitive_insertion} Ada Reference Manual — 2012 Edition all_sign_aft ::= {all_sign_aft_char} sign_char all_sign_aft_char ::= sign_char | context_sensitive_insertion sign_char ::= + | – | < all_currency_number ::= all_currency_fore [radix [all_currency_aft]] all_currency_fore ::= currency_char {context_sensitive_insertion} currency_char {currency_char | context_sensitive_insertion} all_currency_aft ::= {all_currency_aft_char} currency_char all_currency_aft_char ::= currency_char | context_sensitive_insertion currency_char ::= $ | # all_zero_suppression_number ::= all_zero_suppression_fore [ radix [all_zero_suppression_aft]] all_zero_suppression_fore ::= zero_suppression_char {zero_suppression_char | context_sensitive_insertion} all_zero_suppression_aft ::= {all_zero_suppression_aft_char} zero_suppression_char all_zero_suppression_aft_char ::= zero_suppression_char | context_sensitive_insertion zero_suppression_char ::= Z | * The following composition constraints apply to a picture String: • A floating_LHS_sign does not have occurrences of different LHS_Sign Character values. • If a picture String has '<' as fixed_LHS_sign, then it has '>' as RHS_sign. • If a picture String has '<' in a floating_LHS_sign or in an all_sign_number, then it has an occurrence of '>'. 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 • If a picture String has '+' or '–' as fixed_LHS_sign, in a floating_LHS_sign, or in an 43/1 all_sign_number, then it has no RHS_sign or '>' character. • An instance of all_sign_number does not have occurrences of different sign_char Character values. • An instance of all_currency_number does not have occurrences of different currency_char Character values. • An instance of all_zero_suppression_number does not have occurrences of different zero_- suppression_char Character values, except for possible case differences between 'Z' and 'z'. A replicable Character is a Character that, by the above rules, can occur in two consecutive positions in a picture String. A Character replication is a String char & '(' & spaces & count_string & ')' where char is a replicable Character, spaces is a String (possibly empty) comprising only space Character values, and count_string is a String of one or more decimal digit Character values. A Character replication 44 45 46 47 48 49 50 691 13 December 2012 Picture String Formation F.3.1 Ada Reference Manual — 2012 Edition in a picture String has the same effect as (and is said to be equivalent to) a String comprising n consecutive occurrences of char, where n=Integer'Value(count_string). 51 An expanded picture String is a picture String containing no Character replications. 52 NOTES 3 Although a sign to the left of the number can float, a sign to the right of the number is in a fixed position. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 F.3.2 Edited Output Generation The contents of an edited output string are based on: Dynamic Semantics • A value, Item, of some decimal type Num, • An expanded picture String Pic_String, • A Boolean value, Blank_When_Zero, • A Currency string, • A Fill character, • A Separator character, and • A Radix_Mark character. The combination of a True value for Blank_When_Zero and a '*' character in Pic_String is inconsistent; no edited output string is defined. A layout error is identified in the rules below if leading nonzero digits of Item, character values of the Currency string, or a negative sign would be truncated; in such cases no edited output string is defined. The edited output string has lower bound 1 and upper bound N where N = Pic_String'Length + Currency_Length_Adjustment – Radix_Adjustment, and • Currency_Length_Adjustment = Currency'Length – 1 if there is some occurrence of '$' in Pic_String, and 0 otherwise. • Radix_Adjustment = 1 if there is an occurrence of 'V' or 'v' in Pic_Str, and 0 otherwise. Let the magnitude of Item be expressed as a base-10 number Ip···I1.F1···Fq, called the displayed magnitude of Item, where: • q = Min(Max(Num'Scale, 0), n) where n is 0 if Pic_String has no radix and is otherwise the number of digit positions following radix in Pic_String, where a digit position corresponds to an occurrence of '9', a zero_suppression_char (for an all_zero_suppression_number), a currency_char (for an all_currency_number), or a sign_char (for an all_sign_number). • Ip /= 0 if p>0. If n < Num'Scale, then the above number is the result of rounding (away from 0 if exactly midway between values). If Blank_When_Zero = True and the displayed magnitude of Item is zero, then the edited output string comprises all space character values. Otherwise, the picture String is treated as a sequence of instances of syntactic categories based on the rules in F.3.1, and the edited output string is the concatenation of string values derived from these categories according to the following mapping rules. F.3.1 Picture String Formation 13 December 2012 692 Ada Reference Manual — 2012 Edition Table F-1 shows the mapping from a sign control symbol to a corresponding character or string in the edited output. In the columns showing the edited output, a lower-case 'b' represents the space character. If there is no sign control symbol but the value of Item is negative, a layout error occurs and no edited output string is produced. 19 Table F-1: Edited Output for Sign Control Symbols Edited Output for Nonnegative Number Sign Control Symbol Edited Output for Negative Number '+' '–' '<' '>' "CR" "DB" '+' 'b' 'b' 'b' "bb" "bb" '–' '–' '(' ')' "CR" "DB" An instance of fixed_LHS_sign maps to a character as shown in Table F-1. An instance of fixed_$_char maps to Currency. An instance of direct_insertion maps to Separator if direct_insertion = '_', and to the direct_insertion Character otherwise. An instance of number maps to a string integer_part & radix_part & fraction_part where: • The string for integer_part is obtained as follows: 1. Occurrences of '9' in fore_digits of number are replaced from right to left with the decimal digit character values for I1, ..., Ip, respectively. 2. Each occurrence of '9' in fore_digits to the left of the leftmost '9' replaced according to rule 1 is replaced with '0'. 3. If p exceeds the number of occurrences of '9' in fore_digits of number, then the excess leftmost digits are eligible for use in the mapping of an instance of zero_suppression, floating_LHS_sign, floating_$_currency, or floating_#_currency to the left of number; if there is no such instance, then a layout error occurs and no edited output string is produced. • The radix_part is: • "" if number does not include a radix, if radix = 'V', or if radix = 'v' • Radix_Mark if number includes '.' as radix • The string for fraction_part is obtained as follows: 1. Occurrences of '9' in aft_digits of number are replaced from left to right with the decimal digit character values for F1, ... Fq. 2. Each occurrence of '9' in aft_digits to the right of the rightmost '9' replaced according to rule 1 is replaced by '0'. An instance of zero_suppression maps to the string obtained as follows: 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 693 13 December 2012 Edited Output Generation F.3.2 Ada Reference Manual — 2012 Edition 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 1. The rightmost 'Z', 'z', or '*' Character values are replaced with the excess digits (if any) from the integer_part of the mapping of the number to the right of the zero_suppression instance, 2. A context_sensitive_insertion Character is replaced as though it were a direct_insertion Character, if it occurs to the right of some 'Z', 'z', or '*' in zero_suppression that has been mapped to an excess digit, 3. Each Character to the left of the leftmost Character replaced according to rule 1 above is replaced by: • • the space character if the zero suppression Character is 'Z' or 'z', or the Fill character if the zero suppression Character is '*'. 4. A layout error occurs if some excess digits remain after all 'Z', 'z', and '*' Character values in zero_suppression have been replaced via rule 1; no edited output string is produced. An instance of RHS_sign maps to a character or string as shown in Table F-1. An instance of floating_LHS_sign maps to the string obtained as follows. 1. Up to all but one of the rightmost LHS_Sign Character values are replaced by the excess digits (if any) from the integer_part of the mapping of the number to the right of the floating_LHS_sign instance. 2. The next Character to the left is replaced with the character given by the entry in Table F-1 corresponding to the LHS_Sign Character. 3. A context_sensitive_insertion Character is replaced as though it were a direct_insertion Character, if it occurs to the right of the leftmost LHS_Sign character replaced according to rule 1. 4. Any other Character is replaced by the space character.. 5. A layout error occurs if some excess digits remain after replacement via rule 1; no edited output string is produced. An instance of fixed_#_currency maps to the Currency string with n space character values concatenated on the left (if the instance does not follow a radix) or on the right (if the instance does follow a radix), where n is the difference between the length of the fixed_#_currency instance and Currency'Length. A layout error occurs if Currency'Length exceeds the length of the fixed_#_currency instance; no edited output string is produced. An instance of floating_$_currency maps to the string obtained as follows: 1. Up to all but one of the rightmost '$' Character values are replaced with the excess digits (if any) from the integer_part of the mapping of the number to the right of the floating_$_currency instance. 2. The next Character to the left is replaced by the Currency string. 3. A context_sensitive_insertion Character is replaced as though it were a direct_insertion Character, if it occurs to the right of the leftmost '$' Character replaced via rule 1. 4. Each other Character is replaced by the space character. 5. A layout error occurs if some excess digits remain after replacement by rule 1; no edited output string is produced. 55 An instance of floating_#_currency maps to the string obtained as follows: F.3.2 Edited Output Generation 13 December 2012 694 Ada Reference Manual — 2012 Edition 1. Up to all but one of the rightmost '#' Character values are replaced with the excess digits (if any) from the integer_part of the mapping of the number to the right of the floating_#_currency instance. 2. The substring whose last Character occurs at the position immediately preceding the leftmost Character replaced via rule 1, and whose length is Currency'Length, is replaced by the Currency string. 3. A context_sensitive_insertion Character is replaced as though it were a direct_insertion Character, if it occurs to the right of the leftmost '#' replaced via rule 1. 4. Any other Character is replaced by the space character. 5. A layout error occurs if some excess digits remain after replacement rule 1, or if there is no substring with the required length for replacement rule 2; no edited output string is produced. An instance of all_zero_suppression_number maps to: • a string of all spaces if the displayed magnitude of Item is zero, the zero_suppression_char is 'Z' or 'z', and the instance of all_zero_suppression_number does not have a radix at its last character position; • a string containing the Fill character in each position except for the character (if any) corresponding to radix, if zero_suppression_char = '*' and the displayed magnitude of Item is zero; • otherwise, the same result as if each zero_suppression_char in all_zero_suppression_aft were '9', interpreting the instance of all_zero_suppression_number as either zero_suppression number (if a radix and all_zero_suppression_aft are present), or as zero_suppression otherwise. An instance of all_sign_number maps to: • a string of all spaces if the displayed magnitude of Item is zero and the instance of all_sign_number does not have a radix at its last character position; • otherwise, the same result as if each sign_char in all_sign_number_aft were '9', interpreting the radix and instance of all_sign_number as either all_sign_number_aft are present), or as floating_LHS_sign otherwise. floating_LHS_sign number (if a An instance of all_currency_number maps to: • a string of all spaces if the displayed magnitude of Item is zero and the instance of all_currency_number does not have a radix at its last character position; • otherwise, the same result as if each currency_char in all_currency_number_aft were '9', interpreting floating_$_currency number or floating_#_currency number (if a radix and all_currency_number_aft are present), or as floating_$_currency or floating_#_currency otherwise. instance of all_currency_number as the In the result string values shown below, 'b' represents the space character. Examples Item: Picture and Result Strings: 123456.78 Picture: "-###**_***_**9.99" Result: "bbb$***123,456.78" "bbFF***123.456,78" (currency = "FF", separator = '.', radix mark = ',') 695 13 December 2012 Edited Output Generation F.3.2 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73/3 Ada Reference Manual — 2012 Edition 74/1 123456.78 Picture: "-$**_***_**9.99" Result: "b$***123,456.78" "bFF***123.456,78" (currency = "FF", separator = '.', radix mark = ',') 75 76 77 78 1 2 3 4 5 6 7 8 9 10 11 12 0.0 Picture: "-$$$$$$.$$" Result: "bbbbbbbbbb" 0.20 Picture: "-$$$$$$.$$" Result: "bbbbbb$.20" -1234.565 Picture: "<<<<_<<<.<<###>" Result: "bb(1,234.57DMb)" (currency = "DM") 12345.67 Picture: "###_###_##9.99" Result: "bbCHF12,345.67" (currency = "CHF") F.3.3 The Package Text_IO.Editing The package Text_IO.Editing provides a private type Picture with associated operations, and a generic package Decimal_Output. An object of type Picture is composed from a well-formed picture String (see F.3.1) and a Boolean item indicating whether a zero numeric value will result in an edited output string of all space characters. The package Decimal_Output contains edited output subprograms implementing the effects defined in F.3.2. The library package Text_IO.Editing has the following declaration: Static Semantics package Ada.Text_IO.Editing is type Picture is private; function Valid (Pic_String : in String; Blank_When_Zero : in Boolean := False) return Boolean; function To_Picture (Pic_String : in String; Blank_When_Zero : in Boolean := False) return Picture; function Pic_String (Pic : in Picture) return String; function Blank_When_Zero (Pic : in Picture) return Boolean; Max_Picture_Length : constant := implementation_defined; Picture_Error : exception; Default_Currency : constant String := "$"; Default_Fill : constant Character := '*'; Default_Separator : constant Character := ','; Default_Radix_Mark : constant Character := '.'; generic type Num is delta <> digits <>; Default_Currency : in String := Text_IO.Editing.Default_Currency; Default_Fill : in Character := Text_IO.Editing.Default_Fill; Default_Separator : in Character := Text_IO.Editing.Default_Separator; Default_Radix_Mark : in Character := Text_IO.Editing.Default_Radix_Mark; package Decimal_Output is function Length (Pic : in Picture; Currency : in String := Default_Currency) return Natural; function Valid (Item : in Num; Pic : in Picture; Currency : in String := Default_Currency) return Boolean; F.3.2 Edited Output Generation 13 December 2012 696 Ada Reference Manual — 2012 Edition function Image (Item : in Num; Pic : in Picture; Currency : in String := Default_Currency; Fill : in Character := Default_Fill; Separator : in Character := Default_Separator; Radix_Mark : in Character := Default_Radix_Mark) return String; procedure Put (File : in File_Type; Item : in Num; Pic : in Picture; Currency : in String := Default_Currency; Fill : in Character := Default_Fill; Separator : in Character := Default_Separator; Radix_Mark : in Character := Default_Radix_Mark); procedure Put (Item : in Num; Pic : in Picture; Currency : in String := Default_Currency; Fill : in Character := Default_Fill; Separator : in Character := Default_Separator; Radix_Mark : in Character := Default_Radix_Mark); procedure Put (To : out String; Item : in Num; Pic : in Picture; Currency : in String := Default_Currency; Fill : in Character := Default_Fill; Separator : in Character := Default_Separator; Radix_Mark : in Character := Default_Radix_Mark); end Decimal_Output; private ... -- not specified by the language end Ada.Text_IO.Editing; The exception Constraint_Error is raised if the Image function or any of the Put procedures is invoked with a null string for Currency. function Valid (Pic_String : in String; Blank_When_Zero : in Boolean := False) return Boolean; Valid returns True if Pic_String is a well-formed picture String (see F.3.1) the length of whose expansion does not exceed Max_Picture_Length, and if either Blank_When_Zero is False or Pic_String contains no '*'. function To_Picture (Pic_String : in String; Blank_When_Zero : in Boolean := False) return Picture; To_Picture returns a result Picture such that the application of the function Pic_String to this result yields an expanded picture String equivalent that Blank_When_Zero applied to the result Picture is the same value as the parameter Blank_When_Zero. Picture_Error is raised if not Valid(Pic_String, Blank_When_Zero). to Pic_String, and such function Pic_String (Pic : in Picture) return String; function Blank_When_Zero (Pic : in Picture) return Boolean; If Pic is To_Picture(String_Item, Boolean_Item) for some String_Item and Boolean_Item, then: • Pic_String(Pic) returns an expanded picture String equivalent to String_Item and with any lower-case letter replaced with its corresponding upper-case form, and • Blank_When_Zero(Pic) returns Boolean_Item. If Pic_1 and Pic_2 are objects of type Picture, then "="(Pic_1, Pic_2) is True when 697 13 December 2012 The Package Text_IO.Editing F.3.3 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 Ada Reference Manual — 2012 Edition • Pic_String(Pic_1) = Pic_String(Pic_2), and • Blank_When_Zero(Pic_1) = Blank_When_Zero(Pic_2). function Length (Pic : in Picture; Currency : in String := Default_Currency) return Natural; Length returns Pic_String(Pic)'Length + Currency_Length_Adjustment – Radix_Adjustment where • Currency_Length_Adjustment = • Currency'Length – 1 if there is some occurrence of '$' in Pic_String(Pic), and • 0 otherwise. • Radix_Adjustment = • 1 if there is an occurrence of 'V' or 'v' in Pic_Str(Pic), and • 0 otherwise. function Valid (Item : in Num; Pic : in Picture; Currency : in String := Default_Currency) return Boolean; Valid returns True if Image(Item, Pic, Currency) does not raise Layout_Error, and returns False otherwise. function Image (Item : in Num; Pic : in Picture; Currency : in String := Default_Currency; Fill : in Character := Default_Fill; Separator : in Character := Default_Separator; Radix_Mark : in Character := Default_Radix_Mark) return String; Image returns the edited output String as defined in F.3.2 for Item, Pic_String(Pic), Blank_When_Zero(Pic), Currency, Fill, Separator, and Radix_Mark. If these rules identify a layout error, then Image raises the exception Layout_Error. procedure Put (File : in File_Type; Item : in Num; Pic : in Picture; Currency : in String := Default_Currency; Fill : in Character := Default_Fill; Separator : in Character := Default_Separator; Radix_Mark : in Character := Default_Radix_Mark); procedure Put (Item : in Num; Pic : in Picture; Currency : in String := Default_Currency; Fill : in Character := Default_Fill; Separator : in Character := Default_Separator; Radix_Mark : in Character := Default_Radix_Mark); Each of these Put procedures outputs Image(Item, Pic, Currency, Fill, Separator, Radix_Mark) consistent with the conventions for Put for other real types in case of bounded line length (see A.10.6, “Get and Put Procedures”). F.3.3 The Package Text_IO.Editing 13 December 2012 698 Ada Reference Manual — 2012 Edition procedure Put (To : out String; Item : in Num; Pic : in Picture; Currency : in String := Default_Currency; Fill : in Character := Default_Fill; Separator : in Character := Default_Separator; Radix_Mark : in Character := Default_Radix_Mark); 43 Put copies Image(Item, Pic, Currency, Fill, Separator, Radix_Mark) to the given string, right justified. Otherwise, unassigned Character values in To are assigned the space character. If To'Length is less than the length of the string resulting from Image, then Layout_Error is raised. 44/3 Max_Picture_Length shall be at least 30. The implementation shall support currency strings of length up to at least 10, both for Default_Currency in an instantiation of Decimal_Output, and for Currency in an invocation of Image or any of the Put procedures. Implementation Requirements NOTES 4 The rules for edited output are based on COBOL (ANSI X3.23:1985, endorsed by ISO as ISO 1989-1985), with the following differences: • The COBOL provisions for picture string localization and for 'P' format are absent from Ada. • The following Ada facilities are not in COBOL: • • • currency symbol placement after the number, localization of edited output string for multi-character currency string values, including support for both length-preserving and length-expanding currency symbols in picture strings localization of the radix mark, digits separator, and fill character, and • parenthesization of negative values. The value of 30 for Max_Picture_Length is the same limit as in COBOL. F.3.4 The Package Wide_Text_IO.Editing Static Semantics The child package Wide_Text_IO.Editing has the same contents as Text_IO.Editing, except that: • each occurrence of Character is replaced by Wide_Character, • each occurrence of Text_IO is replaced by Wide_Text_IO, • • each occurrence of String in the generic package Decimal_Output is replaced by Wide_String. the subtype of Default_Currency is Wide_String rather than String, and NOTES 5 Each of the functions Wide_Text_IO.Editing.Valid, To_Picture, and Pic_String has String (versus Wide_String) as its parameter or result subtype, since a picture String is not localizable. F.3.5 The Package Wide_Wide_Text_IO.Editing The child package Wide_Wide_Text_IO.Editing has the same contents as Text_IO.Editing, except that: Static Semantics • each occurrence of Character is replaced by Wide_Wide_Character, • each occurrence of Text_IO is replaced by Wide_Wide_Text_IO, • the subtype of Default_Currency is Wide_Wide_String rather than String, and 45 46 47 48 49 50 51 52 52.1 1 2 3 4 5 6 1/2 2/2 3/2 4/2 699 13 December 2012 The Package Text_IO.Editing F.3.3 Ada Reference Manual — 2012 Edition 5/2 • each occurrence of String in the generic package Decimal_Output is replaced by Wide_Wide_String. 6/2 NOTES 6 Each of Wide_Wide_String) as its parameter or result subtype, since a picture String is not localizable. the functions Wide_Wide_Text_IO.Editing.Valid, To_Picture, and Pic_String has String (versus F.3.5 The Package Wide_Wide_Text_IO.Editing 13 December 2012 700 Ada Reference Manual — 2012 Edition Annex G (normative) Numerics The Numerics Annex specifies • features for complex arithmetic, including complex I/O; • a mode (“strict mode”), in which the predefined arithmetic operations of floating point and fixed point types and the functions and operations of various predefined packages have to provide guaranteed accuracy or conform to other numeric performance requirements, which the Numerics Annex also specifies; • a mode (“relaxed mode”), in which no accuracy or other numeric performance requirements need be satisfied, as for implementations not conforming to the Numerics Annex; • models of floating point and fixed point arithmetic on which the accuracy requirements of strict mode are based; • the definitions of the model-oriented attributes of floating point types that apply in the strict mode; and • features for the manipulation of real and complex vectors and matrices. Implementation Advice If Fortran (respectively, C) is widely supported in the target environment, implementations supporting the Numerics Annex should provide the child package Interfaces.Fortran (respectively, Interfaces.C) specified in Annex B and should support a convention_identifier of Fortran (respectively, C) for the Convention aspect (see Annex B), thus allowing Ada programs to interface with programs written in that language. 1 2 3 4 5/2 6/2 6.1/2 7/3 G.1 Complex Arithmetic Types and arithmetic operations for complex arithmetic are provided in Generic_Complex_Types, which is defined in G.1.1. Implementation-defined approximations to the complex analogs of the mathematical functions known as the “elementary functions” are provided by the subprograms in Generic_Complex_- Elementary_Functions, which is defined in G.1.2. Both of these library units are generic children of the predefined package Numerics (see A.5). Nongeneric equivalents of these generic packages for each of the predefined floating point types are also provided as children of Numerics. 1 G.1.1 Complex Types The generic library package Numerics.Generic_Complex_Types has the following declaration: Static Semantics generic type Real is digits <>; package Ada.Numerics.Generic_Complex_Types is pragma Pure(Generic_Complex_Types); type Complex is record Re, Im : Real'Base; end record; 1 2/1 3 701 13 December 2012 Numerics G Ada Reference Manual — 2012 Edition 4/2 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 type Imaginary is private; pragma Preelaborable_Initialization(Imaginary); i : constant Imaginary; j : constant Imaginary; function Re (X : Complex) return Real'Base; function Im (X : Complex) return Real'Base; function Im (X : Imaginary) return Real'Base; procedure Set_Re (X : in out Complex; Re : in Real'Base); procedure Set_Im (X : in out Complex; Im : in Real'Base); procedure Set_Im (X : out Imaginary; Im : in Real'Base); function Compose_From_Cartesian (Re, Im : Real'Base) return Complex; function Compose_From_Cartesian (Re : Real'Base) return Complex; function Compose_From_Cartesian (Im : Imaginary) return Complex; function Modulus (X : Complex) return Real'Base; function "abs" (Right : Complex) return Real'Base renames Modulus; function Argument (X : Complex) return Real'Base; function Argument (X : Complex; Cycle : Real'Base) return Real'Base; function Compose_From_Polar (Modulus, Argument : Real'Base) return Complex; function Compose_From_Polar (Modulus, Argument, Cycle : Real'Base) return Complex; function "+" (Right : Complex) return Complex; function "-" (Right : Complex) return Complex; function Conjugate (X : Complex) return Complex; function "+" (Left, Right : Complex) return Complex; function "-" (Left, Right : Complex) return Complex; function "*" (Left, Right : Complex) return Complex; function "/" (Left, Right : Complex) return Complex; function "**" (Left : Complex; Right : Integer) return Complex; function "+" (Right : Imaginary) return Imaginary; function "-" (Right : Imaginary) return Imaginary; function Conjugate (X : Imaginary) return Imaginary renames "-"; function "abs" (Right : Imaginary) return Real'Base; function "+" (Left, Right : Imaginary) return Imaginary; function "-" (Left, Right : Imaginary) return Imaginary; function "*" (Left, Right : Imaginary) return Real'Base; function "/" (Left, Right : Imaginary) return Real'Base; function "**" (Left : Imaginary; Right : Integer) return Complex; function "<" (Left, Right : Imaginary) return Boolean; function "<=" (Left, Right : Imaginary) return Boolean; function ">" (Left, Right : Imaginary) return Boolean; function ">=" (Left, Right : Imaginary) return Boolean; function "+" (Left : Complex; Right : Real'Base) return Complex; function "+" (Left : Real'Base; Right : Complex) return Complex; function "-" (Left : Complex; Right : Real'Base) return Complex; function "-" (Left : Real'Base; Right : Complex) return Complex; function "*" (Left : Complex; Right : Real'Base) return Complex; function "*" (Left : Real'Base; Right : Complex) return Complex; function "/" (Left : Complex; Right : Real'Base) return Complex; function "/" (Left : Real'Base; Right : Complex) return Complex; G.1.1 Complex Types 13 December 2012 702 Ada Reference Manual — 2012 Edition function "+" (Left : Complex; Right : Imaginary) return Complex; function "+" (Left : Imaginary; Right : Complex) return Complex; function "-" (Left : Complex; Right : Imaginary) return Complex; function "-" (Left : Imaginary; Right : Complex) return Complex; function "*" (Left : Complex; Right : Imaginary) return Complex; function "*" (Left : Imaginary; Right : Complex) return Complex; function "/" (Left : Complex; Right : Imaginary) return Complex; function "/" (Left : Imaginary; Right : Complex) return Complex; function "+" (Left : Imaginary; Right : Real'Base) return Complex; function "+" (Left : Real'Base; Right : Imaginary) return Complex; function "-" (Left : Imaginary; Right : Real'Base) return Complex; function "-" (Left : Real'Base; Right : Imaginary) return Complex; function "*" (Left : Imaginary; Right : Real'Base) return Imaginary; function "*" (Left : Real'Base; Right : Imaginary) return Imaginary; function "/" (Left : Imaginary; Right : Real'Base) return Imaginary; function "/" (Left : Real'Base; Right : Imaginary) return Imaginary; private type Imaginary is new Real'Base; i : constant Imaginary := 1.0; j : constant Imaginary := 1.0; end Ada.Numerics.Generic_Complex_Types; The library package Numerics.Complex_Types is declared pure and defines the same types, constants, and is subprograms as Numerics.Generic_Complex_Types, except systematically of Numerics.Generic_Complex_Types for each of the other predefined floating point types are defined similarly, with the names Numerics.Short_Complex_Types, Numerics.Long_Complex_Types, etc. the predefined Nongeneric type Float throughout. equivalents substituted Real'Base that for Complex is a visible type with Cartesian components. Imaginary is a private type; its full type is derived from Real'Base. The arithmetic operations and the Re, Im, Modulus, Argument, and Conjugate functions have their usual mathematical meanings. When applied to a parameter of pure-imaginary type, the “imaginary-part” function Im yields the value of its parameter, as the corresponding real value. The remaining subprograms have the following meanings: • The Set_Re and Set_Im procedures replace the designated component of a complex parameter with the given real value; applied to a parameter of pure-imaginary type, the Set_Im procedure replaces the value of that parameter with the imaginary value corresponding to the given real value. • The Compose_From_Cartesian function constructs a complex value from the given real and imaginary components. If only one component is given, the other component is implicitly zero. • The Compose_From_Polar function constructs a complex value from the given modulus (radius) and argument (angle). When the value of the parameter Modulus is positive (resp., negative), the result is the complex value represented by the point in the complex plane lying at a distance from the origin given by the absolute value of Modulus and forming an angle measured counterclockwise from the positive (resp., negative) real axis given by the value of the parameter Argument. When the Cycle parameter is specified, the result of the Argument function and the parameter Argument of the Compose_From_Polar function are measured in units such that a full cycle of revolution has the given value; otherwise, they are measured in radians. The computed results of the mathematically multivalued functions are rendered single-valued by the following conventions, which are meant to imply the principal branch: 703 13 December 2012 Complex Types G.1.1 20 21 22 23 24 25/1 26/2 27 28 29 30 31 32 33 Ada Reference Manual — 2012 Edition 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 • The result of the Modulus function is nonnegative. • The result of the Argument function is in the quadrant containing the point in the complex plane represented by the parameter X. This may be any quadrant (I through IV); thus, the range of the Argument function is approximately –π to π (–Cycle/2.0 to Cycle/2.0, if the parameter Cycle is specified). When the point represented by the parameter X lies on the negative real axis, the result approximates • π (resp., –π) when the sign of the imaginary component of X is positive (resp., negative), if Real'Signed_Zeros is True; • π, if Real'Signed_Zeros is False. • Because a result lying on or near one of the axes may not be exactly representable, the approximation inherent in computing the result may place it in an adjacent quadrant, close to but on the wrong side of the axis. Dynamic Semantics The exception Numerics.Argument_Error is raised by the Argument and Compose_From_Polar functions with specified cycle, signaling a parameter value outside the domain of the corresponding mathematical function, when the value of the parameter Cycle is zero or negative. The exception Constraint_Error is raised by the division operator when the value of the right operand is zero, and by the exponentiation operator when the value of the left operand is zero and the value of the exponent is negative, provided that Real'Machine_Overflows is True; when Real'Machine_Overflows is False, the result is unspecified. Constraint_Error can also be raised when a finite result overflows (see G.2.6). Implementation Requirements In the implementation of Numerics.Generic_Complex_Types, the range of intermediate values allowed during the calculation of a final result shall not be affected by any range constraint of the subtype Real. In the following cases, evaluation of a complex arithmetic operation shall yield the prescribed result, provided that the preceding rules do not call for an exception to be raised: • The results of the Re, Im, and Compose_From_Cartesian functions are exact. • The real (resp., imaginary) component of the result of a binary addition operator that yields a result of complex type is exact when either of its operands is of pure-imaginary (resp., real) type. • The real (resp., imaginary) component of the result of a binary subtraction operator that yields a result of complex type is exact when its right operand is of pure-imaginary (resp., real) type. • The real component of the result of the Conjugate function for the complex type is exact. • When the point in the complex plane represented by the parameter X lies on the nonnegative real axis, the Argument function yields a result of zero. • When the value of the parameter Modulus is zero, the Compose_From_Polar function yields a result of zero. • When the value of the parameter Argument is equal to a multiple of the quarter cycle, the result of the Compose_From_Polar function with specified cycle lies on one of the axes. In this case, one of its components is zero, and the other has the magnitude of the parameter Modulus. • Exponentiation by a zero exponent yields the value one. Exponentiation by a unit exponent yields the value of the left operand. Exponentiation of the value one yields the value one. Exponentiation of the value zero yields the value zero, provided that the exponent is nonzero. G.1.1 Complex Types 13 December 2012 704 Ada Reference Manual — 2012 Edition When the left operand is of pure-imaginary type, one component of the result of the exponentiation operator is zero. When the result, or a result component, of any operator of Numerics.Generic_Complex_Types has a mathematical definition in terms of a single arithmetic or relational operation, that result or result component exhibits the accuracy of the corresponding operation of the type Real. Other accuracy requirements for the Modulus, Argument, and Compose_From_Polar functions, and accuracy requirements for the multiplication of a pair of complex operands or for division by a complex operand, all of which apply only in the strict mode, are given in G.2.6. The sign of a zero result or zero result component yielded by a complex arithmetic operation or function is implementation defined when Real'Signed_Zeros is True. Implementation Permissions The nongeneric equivalent packages may, but need not, be actual instantiations of the generic package for the appropriate predefined type. Implementations may obtain the result of exponentiation of a complex or pure-imaginary operand by repeated complex multiplication, with arbitrary association of the factors and with a possible final complex reciprocation (when the exponent is negative). Implementations are also permitted to obtain the result of exponentiation of a complex operand, but not of a pure-imaginary operand, by converting the left operand to a polar representation; exponentiating the modulus by the given exponent; multiplying the argument by the given exponent; and reconverting to a Cartesian representation. Because of this implementation freedom, no accuracy requirement is imposed on complex exponentiation (except for the prescribed results given above, which apply regardless of the implementation method chosen). Implementation Advice Because the usual mathematical meaning of multiplication of a complex operand and a real operand is that of the scaling of both components of the former by the latter, an implementation should not perform this operation by first promoting the real operand to complex type and then performing a full complex multiplication. In systems that, in the future, support an Ada binding to IEC 559:1989, the latter technique will not generate the required result when one of the components of the complex operand is infinite. (Explicit multiplication of the infinite component by the zero component obtained during promotion yields a NaN that propagates into the final result.) Analogous advice applies in the case of multiplication of a complex operand and a pure-imaginary operand, and in the case of division of a complex operand by a real or pure-imaginary operand. Likewise, because the usual mathematical meaning of addition of a complex operand and a real operand is that the imaginary operand remains unchanged, an implementation should not perform this operation by first promoting the real operand to complex type and then performing a full complex addition. In implementations in which the Signed_Zeros attribute of the component type is True (and which therefore conform to IEC 559:1989 in regard to the handling of the sign of zero in predefined arithmetic operations), the latter technique will not generate the required result when the imaginary component of the complex operand is a negatively signed zero. (Explicit addition of the negative zero to the zero obtained during promotion yields a positive zero.) Analogous advice applies in the case of addition of a complex operand and a pure-imaginary operand, and in the case of subtraction of a complex operand and a real or pure- imaginary operand. 51 52 53 54 55/2 56 57 Implementations in which Real'Signed_Zeros is True should attempt to provide a rational treatment of the signs of zero results and result components. As one example, the result of the Argument function should have the sign of the imaginary component of the parameter X when the point represented by that 58 705 13 December 2012 Complex Types G.1.1 Ada Reference Manual — 2012 Edition parameter lies on the positive real axis; as another, the sign of the imaginary component of the Compose_- From_Polar function should be the same as (resp., the opposite of) that of the Argument parameter when that parameter has a value of zero and the Modulus parameter has a nonnegative (resp., negative) value. G.1.2 Complex Elementary Functions Static Semantics The generic library package Numerics.Generic_Complex_Elementary_Functions has the following declaration: with Ada.Numerics.Generic_Complex_Types; generic with package Complex_Types is new Ada.Numerics.Generic_Complex_Types (<>); use Complex_Types; package Ada.Numerics.Generic_Complex_Elementary_Functions is pragma Pure(Generic_Complex_Elementary_Functions); function Sqrt (X : Complex) return Complex; function Log (X : Complex) return Complex; function Exp (X : Complex) return Complex; function Exp (X : Imaginary) return Complex; function "**" (Left : Complex; Right : Complex) return Complex; function "**" (Left : Complex; Right : Real'Base) return Complex; function "**" (Left : Real'Base; Right : Complex) return Complex; function Sin (X : Complex) return Complex; function Cos (X : Complex) return Complex; function Tan (X : Complex) return Complex; function Cot (X : Complex) return Complex; function Arcsin (X : Complex) return Complex; function Arccos (X : Complex) return Complex; function Arctan (X : Complex) return Complex; function Arccot (X : Complex) return Complex; function Sinh (X : Complex) return Complex; function Cosh (X : Complex) return Complex; function Tanh (X : Complex) return Complex; function Coth (X : Complex) return Complex; function Arcsinh (X : Complex) return Complex; function Arccosh (X : Complex) return Complex; function Arctanh (X : Complex) return Complex; function Arccoth (X : Complex) return Complex; end Ada.Numerics.Generic_Complex_Elementary_Functions; The library package Numerics.Complex_Elementary_Functions is declared pure and defines the same subprograms as Numerics.Generic_Complex_Elementary_Functions, except that the predefined type Float is systematically substituted for Real'Base, and the Complex and Imaginary types exported by Numerics.- Complex_Types are systematically substituted for Complex and Imaginary, throughout. Nongeneric equivalents of Numerics.Generic_Complex_Elementary_Functions corresponding to each of the other predefined floating point types are defined similarly, with the names Numerics.Short_Complex_- Elementary_Functions, Numerics.Long_Complex_Elementary_Functions, etc. The overloading of the Exp function for the pure-imaginary type is provided to give the user an alternate way to compose a complex value from a given modulus and argument. In addition to Compose_From_- Polar(Rho, Theta) (see G.1.1), the programmer may write Rho * Exp(i * Theta). The imaginary (resp., real) component of the parameter X of the forward hyperbolic (resp., trigonometric) functions and of the Exp function (and the parameter X, itself, in the case of the overloading of the Exp G.1.1 Complex Types 13 December 2012 706 1 2/2 3 4 5 6 7 8 9/1 10 11 Ada Reference Manual — 2012 Edition function for the pure-imaginary type) represents an angle measured in radians, as does the imaginary (resp., real) component of the result of the Log and inverse hyperbolic (resp., trigonometric) functions. The functions have their usual mathematical meanings. However, the arbitrariness inherent in the placement of branch cuts, across which some of the complex elementary functions exhibit discontinuities, is eliminated by the following conventions: • The imaginary component of the result of the Sqrt and Log functions is discontinuous as the parameter X crosses the negative real axis. • The result of the exponentiation operator when the left operand is of complex type is discontinuous as that operand crosses the negative real axis. • The imaginary component of the result of the Arcsin, Arccos, and Arctanh functions is discontinuous as the parameter X crosses the real axis to the left of –1.0 or the right of 1.0. • The real component of the result of the Arctan and Arcsinh functions is discontinuous as the parameter X crosses the imaginary axis below –i or above i. • The real component of the result of the Arccot function is discontinuous as the parameter X crosses the imaginary axis below –i or above i. • The imaginary component of the Arccosh function is discontinuous as the parameter X crosses the real axis to the left of 1.0. • The imaginary component of the result of the Arccoth function is discontinuous as the parameter X crosses the real axis between –1.0 and 1.0. The computed results of the mathematically multivalued functions are rendered single-valued by the following conventions, which are meant to imply that the principal branch is an analytic continuation of the corresponding real-valued function in Numerics.Generic_Elementary_Functions. (For Arctan and Arccot, the single-argument function in question is that obtained from the two-argument version by fixing the second argument to be its default value.) • The real component of the result of the Sqrt and Arccosh functions is nonnegative. • The same convention applies to the imaginary component of the result of the Log function as function of the natural-cycle version of the Argument the to result of applies Numerics.Generic_Complex_Types (see G.1.1). • The range of the real (resp., imaginary) component of the result of the Arcsin and Arctan (resp., Arcsinh and Arctanh) functions is approximately –π/2.0 to π/2.0. • The real (resp., imaginary) component of the result of the Arccos and Arccot (resp., Arccoth) functions ranges from 0.0 to approximately π. • The range of the imaginary component of the result of the Arccosh function is approximately –π to π. In addition, the exponentiation operator inherits the single-valuedness of the Log function. Dynamic Semantics The exception Numerics.Argument_Error is raised by the exponentiation operator, signaling a parameter value outside the domain of the corresponding mathematical function, when the value of the left operand is zero and the real component of the exponent (or the exponent itself, when it is of real type) is zero. The exception Constraint_Error is raised, signaling a pole of the mathematical function (analogous to dividing by zero), in the following cases, provided that Complex_Types.Real'Machine_Overflows is True: • by the Log, Cot, and Coth functions, when the value of the parameter X is zero; 707 13 December 2012 Complex Elementary Functions G.1.2 12 13 14 15/2 16/2 17/2 18 19 20/2 21 22 23 24 25 26 27 28 29 Ada Reference Manual — 2012 Edition 30 31 32 33 34 35 36 37 38 39 40 41/2 42 43 44 45 46 • by the exponentiation operator, when the value of the left operand is zero and the real component of the exponent (or the exponent itself, when it is of real type) is negative; • by the Arctan and Arccot functions, when the value of the parameter X is ± i; • by the Arctanh and Arccoth functions, when the value of the parameter X is ± 1.0. Constraint_Error can also be raised when a finite result overflows (see G.2.6); this may occur for parameter values sufficiently near poles, and, in the case of some of the functions, for parameter values having components of sufficiently large magnitude. When Complex_Types.Real'Machine_Overflows is False, the result at poles is unspecified. Implementation Requirements In the implementation of Numerics.Generic_Complex_Elementary_Functions, the range of intermediate values allowed during the calculation of a final result shall not be affected by any range constraint of the subtype Complex_Types.Real. In the following cases, evaluation of a complex elementary function shall yield the prescribed result (or a result having the prescribed component), provided that the preceding rules do not call for an exception to be raised: • When the parameter X has the value zero, the Sqrt, Sin, Arcsin, Tan, Arctan, Sinh, Arcsinh, Tanh, and Arctanh functions yield a result of zero; the Exp, Cos, and Cosh functions yield a result of one; the Arccos and Arccot functions yield a real result; and the Arccoth function yields an imaginary result. • When the parameter X has the value one, the Sqrt function yields a result of one; the Log, Arccos, and Arccosh functions yield a result of zero; and the Arcsin function yields a real result. • When the parameter X has the value –1.0, the Sqrt function yields the result • i (resp., –i), when the sign of the imaginary component of X is positive (resp., negative), if Complex_Types.Real'Signed_Zeros is True; • i, if Complex_Types.Real'Signed_Zeros is False; • When the parameter X has the value –1.0, the Log function yields an imaginary result; and the Arcsin and Arccos functions yield a real result. • When the parameter X has the value ± i, the Log function yields an imaginary result. • Exponentiation by a zero exponent yields the value one. Exponentiation by a unit exponent yields the value of the left operand (as a complex value). Exponentiation of the value one yields the value one. Exponentiation of the value zero yields the value zero. Other accuracy requirements for the complex elementary functions, which apply only in the strict mode, are given in G.2.6. The sign of a zero result or zero result component yielded by a complex elementary function is implementation defined when Complex_Types.Real'Signed_Zeros is True. The nongeneric equivalent packages may, but need not, be actual instantiations of the generic package with the appropriate predefined nongeneric equivalent of Numerics.Generic_Complex_Types; if they are, then the latter shall have been obtained by actual instantiation of Numerics.Generic_Complex_Types. Implementation Permissions G.1.2 Complex Elementary Functions 13 December 2012 708 Ada Reference Manual — 2012 Edition The exponentiation operator may be implemented in terms of the Exp and Log functions. Because this implementation yields poor accuracy in some parts of the domain, no accuracy requirement is imposed on complex exponentiation. The implementation of the Exp function of a complex parameter X is allowed to raise the exception Constraint_Error, signaling overflow, when the real component of X exceeds an unspecified threshold that is approximately log(Complex_Types.Real'Safe_Last). This permission recognizes the impracticality of avoiding overflow in the marginal case that the exponential of the real component of X exceeds the safe range of Complex_Types.Real but both components of the final result do not. Similarly, the Sin and Cos (resp., Sinh and Cosh) functions are allowed to raise the exception Constraint_Error, signaling overflow, when the absolute value of the imaginary (resp., real) component of the parameter X exceeds an unspecified threshold that is approximately log(Complex_Types.Real'Safe_Last) + log(2.0). This permission recognizes the impracticality of avoiding overflow in the marginal case that the hyperbolic sine or cosine of the imaginary (resp., real) component of X exceeds the safe range of Complex_Types.Real but both components of the final result do not. Implementation Advice Implementations in which Complex_Types.Real'Signed_Zeros is True should attempt to provide a rational treatment of the signs of zero results and result components. For example, many of the complex elementary functions have components that are odd functions of one of the parameter components; in these cases, the result component should have the sign of the parameter component at the origin. Other complex elementary functions have zero components whose sign is opposite that of a parameter component at the origin, or is always positive or always negative. G.1.3 Complex Input-Output The generic package Text_IO.Complex_IO defines procedures for the formatted input and output of complex values. The generic actual parameter in an instantiation of Text_IO.Complex_IO is an instance of Numerics.Generic_Complex_Types for some floating point subtype. Exceptional conditions are reported by raising the appropriate exception defined in Text_IO. The generic library package Text_IO.Complex_IO has the following declaration: Static Semantics with Ada.Numerics.Generic_Complex_Types; generic with package Complex_Types is new Ada.Numerics.Generic_Complex_Types (<>); package Ada.Text_IO.Complex_IO is use Complex_Types; Default_Fore : Field := 2; Default_Aft : Field := Real'Digits - 1; Default_Exp : Field := 3; procedure Get (File : in File_Type; Item : out Complex; Width : in Field := 0); procedure Get (Item : out Complex; Width : in Field := 0); 47 48 49 1 2 3 4 5 6 709 13 December 2012 Complex Elementary Functions G.1.2 Ada Reference Manual — 2012 Edition procedure Put (File : in File_Type; Item : in Complex; Fore : in Field := Default_Fore; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); procedure Put (Item : in Complex; Fore : in Field := Default_Fore; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); procedure Get (From : in String; Item : out Complex; Last : out Positive); procedure Put (To : out String; Item : in Complex; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); end Ada.Text_IO.Complex_IO; the predefined The library package Complex_Text_IO defines the same subprograms as Text_IO.Complex_IO, except that type systematically Numerics.Complex_Types.Complex is systematically substituted for Complex throughout. Nongeneric equivalents of Text_IO.Complex_IO corresponding to each of the other predefined floating point types are defined similarly, with the names Short_Complex_Text_IO, Long_Complex_Text_IO, etc. type Float for Real, substituted and the is The semantics of the Get and Put procedures are as follows: procedure Get (File : in File_Type; Item : out Complex; Width : in Field := 0); procedure Get (Item : out Complex; Width : in Field := 0); The input sequence is a pair of optionally signed real literals representing the real and imaginary components of a complex value. These components have the format defined for the corresponding Get procedure of an instance of Text_IO.Float_IO (see A.10.9) for the base subtype of Complex_Types.Real. The pair of components may be separated by a comma or surrounded by a pair of parentheses or both. Blanks are freely allowed before each of the components and before the parentheses and comma, if either is used. If the value of the parameter Width is zero, then • • line and page terminators are also allowed in these places; the components shall be separated by at least one blank or line terminator if the comma is omitted; and • reading stops when the right parenthesis has been read, if the input sequence includes a left parenthesis, or when the imaginary component has been read, otherwise. 7 8 9 9.1/2 10 11 12/1 13 14 15 15.1 If a nonzero value of Width is supplied, then 16 17 18 19 • the components shall be separated by at least one blank if the comma is omitted; and • exactly Width characters are read, or the characters (possibly none) up to a line terminator, whichever comes first (blanks are included in the count). Returns, in the parameter Item, the value of type Complex that corresponds to the input sequence. The exception Text_IO.Data_Error is raised if the input sequence does not have the required syntax or if the components of the complex value obtained are not of the base subtype of Complex_Types.Real. G.1.3 Complex Input-Output 13 December 2012 710 Ada Reference Manual — 2012 Edition procedure Put (File : in File_Type; Item : in Complex; Fore : in Field := Default_Fore; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); procedure Put (Item : in Complex; Fore : in Field := Default_Fore; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); Outputs the value of the parameter Item as a pair of decimal literals representing the real and imaginary components of the complex value, using the syntax of an aggregate. More specifically, • outputs a left parenthesis; • outputs the value of the real component of the parameter Item with the format defined by the corresponding Put procedure of an instance of Text_IO.Float_IO for the base subtype of Complex_Types.Real, using the given values of Fore, Aft, and Exp; • outputs a comma; • outputs the value of the imaginary component of the parameter Item with the format defined by the corresponding Put procedure of an instance of Text_IO.Float_IO for the base subtype of Complex_Types.Real, using the given values of Fore, Aft, and Exp; • outputs a right parenthesis. procedure Get (From : in String; Item : out Complex; Last : out Positive); 20 21 22 23 24 25 26 27 Reads a complex value from the beginning of the given string, following the same rule as the Get procedure that reads a complex value from a file, but treating the end of the string as a file terminator. Returns, in the parameter Item, the value of type Complex that corresponds to the input sequence. Returns in Last the index value such that From(Last) is the last character read. 28/2 The exception Text_IO.Data_Error is raised if the input sequence does not have the required syntax or if the components of the complex value obtained are not of the base subtype of Complex_Types.Real. procedure Put (To : out String; Item : in Complex; Aft : in Field := Default_Aft; Exp : in Field := Default_Exp); Outputs the value of the parameter Item to the given string as a pair of decimal literals representing the real and imaginary components of the complex value, using the syntax of an aggregate. More specifically, • a left parenthesis, the real component, and a comma are left justified in the given string, with the real component having the format defined by the Put procedure (for output to a file) of an instance of Text_IO.Float_IO for the base subtype of Complex_Types.Real, using a value of zero for Fore and the given values of Aft and Exp; • the imaginary component and a right parenthesis are right justified in the given string, with the imaginary component having the format defined by the Put procedure (for output to a file) of an instance of Text_IO.Float_IO for the base subtype of Complex_Types.Real, using a value for Fore that completely fills the remainder of the string, together with the given values of Aft and Exp. 29 30 31 32 33 711 13 December 2012 Complex Input-Output G.1.3 Ada Reference Manual — 2012 Edition 34 35 1 The exception Text_IO.Layout_Error is raised if the given string is too short to hold the formatted output. Other exceptions declared (by renaming) in Text_IO may be raised by the preceding procedures in the appropriate circumstances, as for the corresponding procedures of Text_IO.Float_IO. Implementation Permissions G.1.4 The Package Wide_Text_IO.Complex_IO Static Semantics Implementations shall also provide the generic library package Wide_Text_IO.Complex_IO. Its declaration is obtained from that of Text_IO.Complex_IO by systematically replacing Text_IO by Wide_Text_IO and String by Wide_String; the description of its behavior is obtained by additionally replacing references to particular characters (commas, parentheses, etc.) by those for the corresponding wide characters. G.1.5 The Package Wide_Wide_Text_IO.Complex_IO Static Semantics 1/2 Implementations shall also provide the generic library package Wide_Wide_Text_IO.Complex_IO. Its declaration is obtained from that of Text_IO.Complex_IO by systematically replacing Text_IO by Wide_Wide_Text_IO and String by Wide_Wide_String; the description of its behavior is obtained by additionally replacing references to particular characters (commas, parentheses, etc.) by those for the corresponding wide wide characters. G.2 Numeric Performance Requirements Implementation Requirements Implementations shall provide a user-selectable mode in which the accuracy and other numeric performance requirements detailed in the following subclauses are observed. This mode, referred to as the strict mode, may or may not be the default mode; it directly affects the results of the predefined arithmetic operations of real types and the results of the subprograms in children of the Numerics package, and indirectly affects the operations in other language defined packages. Implementations shall also provide the opposing mode, which is known as the relaxed mode. Either mode may be the default mode. The two modes need not actually be different. Implementation Permissions 1 2 3 G.1.3 Complex Input-Output 13 December 2012 712 Ada Reference Manual — 2012 Edition G.2.1 Model of Floating Point Arithmetic In the strict mode, the predefined operations of a floating point type shall satisfy the accuracy requirements specified here and shall avoid or signal overflow in the situations described. This behavior is presented in terms of a model of floating point arithmetic that builds on the concept of the canonical form (see A.5.3). Static Semantics Associated with each floating point type is an infinite set of model numbers. The model numbers of a type are used to define the accuracy requirements that have to be satisfied by certain predefined operations of the type; through certain attributes of the model numbers, they are also used to explain the meaning of a user-declared floating point type declaration. The model numbers of a derived type are those of the parent type; the model numbers of a subtype are those of its type. The model numbers of a floating point type T are zero and all the values expressible in the canonical form (for the type T), in which mantissa has T'Model_Mantissa digits and exponent has a value greater than or equal to T'Model_Emin. (These attributes are defined in G.2.2.) A model interval of a floating point type is any interval whose bounds are model numbers of the type. The model interval of a type T associated with a value v is the smallest model interval of T that includes v. (The model interval associated with a model number of a type consists of that number only.) Implementation Requirements The accuracy requirements for the evaluation of certain predefined operations of floating point types are as follows. An operand interval is the model interval, of the type specified for the operand of an operation, associated with the value of the operand. For any predefined arithmetic operation that yields a result of a floating point type T, the required bounds on the result are given by a model interval of T (called the result interval) defined in terms of the operand values as follows: • The result interval is the smallest model interval of T that includes the minimum and the maximum of all the values obtained by applying the (exact) mathematical operation to values arbitrarily selected from the respective operand intervals. The result interval of an exponentiation is obtained by applying the above rule to the sequence of multiplications defined by the exponent, assuming arbitrary association of the factors, and to the final division in the case of a negative exponent. The result interval of a conversion of a numeric value to a floating point type T is the model interval of T associated with the operand value, except when the source expression is of a fixed point type with a small that is not a power of T'Machine_Radix or is a fixed point multiplication or division either of whose operands has a small that is not a power of T'Machine_Radix; in these cases, the result interval is implementation defined. For any of the foregoing operations, the implementation shall deliver a value that belongs to the result interval when both bounds of the result interval are in the safe range of the result type T, as determined by the values of T'Safe_First and T'Safe_Last; otherwise, • if T'Machine_Overflows is True, the implementation shall either deliver a value that belongs to the result interval or raise Constraint_Error; 1 2 3 4 5 6 7 8 9 10 11 12 713 13 December 2012 Model of Floating Point Arithmetic G.2.1 13 14 15 16 1 2 3/2 3.1/2 3.2/2 Ada Reference Manual — 2012 Edition • if T'Machine_Overflows is False, the result is implementation defined. For any predefined relation on operands of a floating point type T, the implementation may deliver any value (i.e., either True or False) obtained by applying the (exact) mathematical comparison to values arbitrarily chosen from the respective operand intervals. The result of a membership test is defined in terms of comparisons of the operand value with the lower and upper bounds of the given range or type mark (the usual rules apply to these comparisons). If the underlying floating point hardware implements division as multiplication by a reciprocal, the result interval for division (and exponentiation by a negative exponent) is implementation defined. Implementation Permissions G.2.2 Model-Oriented Attributes of Floating Point Types In implementations that support the Numerics Annex, the model-oriented attributes of floating point types shall yield the values defined here, in both the strict and the relaxed modes. These definitions add conditions to those in A.5.3. For every subtype S of a floating point type T: S'Model_Mantissa Static Semantics Yields the number of digits in the mantissa of the canonical form of the model numbers of T (see A.5.3). The value of this attribute shall be greater than or equal to d · log(10) / log(T'Machine_Radix) + g where d is the requested decimal precision of T, and g is 0 if T'Machine_Radix is a positive power of 10 and 1 otherwise. In addition, T'Model_Mantissa shall be less than or equal to the value of T'Machine_Mantissa. This attribute yields a value of type universal_integer. the 4 S'Model_Emin 5 S'Safe_First 6 S'Safe_Last Yields the minimum exponent of the canonical form of the model numbers of T (see A.5.3). The value of this attribute shall be greater than or equal to the value of T'Machine_Emin. This attribute yields a value of the type universal_integer. Yields the lower bound of the safe range of T. The value of this attribute shall be a model number of T and greater than or equal to the lower bound of the base range of T. In addition, if T is declared by a floating_point_definition or is derived from such a type, and the floating_point_definition includes a real_range_specification specifying a lower bound of lb, then the value of this attribute shall be less than or equal to lb; otherwise, it shall be less than or equal to –10.0 4 · d, where d is the requested decimal precision of T. This attribute yields a value of the type universal_real. Yields the upper bound of the safe range of T. The value of this attribute shall be a model number of T and less than or equal to the upper bound of the base range of T. In addition, if T is declared by a floating_point_definition or is derived from such a type, and the floating_point_definition includes a real_range_specification specifying an upper bound of ub, then the value of this attribute shall be greater than or equal to ub; otherwise, it shall be greater than or equal to 10.0 4 · d, where d is the requested decimal precision of T. This attribute yields a value of the type universal_real. G.2.1 Model of Floating Point Arithmetic 13 December 2012 714 Ada Reference Manual — 2012 Edition S'Model Denotes a function (of a parameter X) whose specification is given in A.5.3. If X is a model number of T, the function yields X; otherwise, it yields the value obtained by rounding or truncating X to either one of the adjacent model numbers of T. Constraint_Error is raised if the resulting model number is outside the safe range of S. A zero result has the sign of X when S'Signed_Zeros is True. Subject to the constraints given above, the values of S'Model_Mantissa and S'Safe_Last are to be maximized, and the values of S'Model_Emin and S'Safe_First minimized, by the implementation as follows: • First, S'Model_Mantissa is set to the largest value for which values of S'Model_Emin, S'Safe_First, and S'Safe_Last can be chosen so that the implementation satisfies the strict-mode requirements of G.2.1 in terms of the model numbers and safe range induced by these attributes. • Next, S'Model_Emin is set to the smallest value for which values of S'Safe_First and S'Safe_Last can be chosen so that the implementation satisfies the strict-mode requirements of G.2.1 in terms of the model numbers and safe range induced by these attributes and the previously determined value of S'Model_Mantissa. • Finally, S'Safe_First and S'Safe_Last are set (in either order) to the smallest and largest values, respectively, for which the implementation satisfies the strict-mode requirements of G.2.1 in terms of the model numbers and safe range induced by these attributes and the previously determined values of S'Model_Mantissa and S'Model_Emin. G.2.3 Model of Fixed Point Arithmetic In the strict mode, the predefined arithmetic operations of a fixed point type shall satisfy the accuracy requirements specified here and shall avoid or signal overflow in the situations described. Implementation Requirements The accuracy requirements for the predefined fixed point arithmetic operations and conversions, and the results of relations on fixed point operands, are given below. The operands of the fixed point adding operators, absolute value, and comparisons have the same type. These operations are required to yield exact results, unless they overflow. Multiplications and divisions are allowed between operands of any two fixed point types; the result has to be (implicitly or explicitly) converted to some other numeric type. For purposes of defining the accuracy rules, the multiplication or division and the conversion are treated as a single operation whose accuracy depends on three types (those of the operands and the result). For decimal fixed point types, the attribute T'Round may be used to imply explicit conversion with rounding (see 3.5.10). When the result type is a floating point type, the accuracy is as given in G.2.1. For some combinations of the operand and result types in the remaining cases, the result is required to belong to a small set of values called the perfect result set; for other combinations, it is required merely to belong to a generally larger and implementation-defined set of values called the close result set. When the result type is a decimal fixed point type, the perfect result set contains a single value; thus, operations on decimal types are always fully specified. When one operand of a fixed-fixed multiplication or division is of type universal_real, that operand is not implicitly converted in the usual sense, since the context does not determine a unique target type, but the accuracy of the result of the multiplication or division (i.e., whether the result has to belong to the perfect result set or merely the close result set) depends on the value of the operand of type universal_real and on the types of the other operand and of the result. 7 8 9 10 11/3 1 2 3 4 5 6 715 13 December 2012 Model-Oriented Attributes of Floating Point Types G.2.2 Ada Reference Manual — 2012 Edition 7 8 9 10 11 12 13 14/3 15 16 17 18 19 20 21 22 23 24 For a fixed point multiplication or division whose (exact) mathematical result is v, and for the conversion of a value v to a fixed point type, the perfect result set and close result set are defined as follows: • If the result type is an ordinary fixed point type with a small of s, • if v is an integer multiple of s, then the perfect result set contains only the value v; • otherwise, it contains the integer multiple of s just below v and the integer multiple of s just above v. The close result set is an implementation-defined set of consecutive integer multiples of s containing the perfect result set as a subset. • If the result type is a decimal type with a small of s, • if v is an integer multiple of s, then the perfect result set contains only the value v; • otherwise, if truncation applies, then it contains only the integer multiple of s in the direction toward zero, whereas if rounding applies, then it contains only the nearest integer multiple of s (with ties broken by rounding away from zero). The close result set is an implementation-defined set of consecutive integer multiples of s containing the perfect result set as a subset. • If the result type is an integer type, • if v is an integer, then the perfect result set contains only the value v; • otherwise, it contains the integer nearest to the value v (if v lies equally distant from two consecutive integers, the perfect result set contains the one that is further from zero). The close result set is an implementation-defined set of consecutive integers containing the perfect result set as a subset. The result of a fixed point multiplication or division shall belong either to the perfect result set or to the close result set, as described below, if overflow does not occur. In the following cases, if the result type is a fixed point type, let s be its small; otherwise, i.e. when the result type is an integer type, let s be 1.0. • For a multiplication or division neither of whose operands is of type universal_real, let l and r be the smalls of the left and right operands. For a multiplication, if (l · r) / s is an integer or the reciprocal of an integer (the smalls are said to be “compatible” in this case), the result shall belong to the perfect result set; otherwise, it belongs to the close result set. For a division, if l / (r · s) is an integer or the reciprocal of an integer (i.e., the smalls are compatible), the result shall belong to the perfect result set; otherwise, it belongs to the close result set. • For a multiplication or division having one universal_real operand with a value of v, note that it is always possible to factor v as an integer multiple of a “compatible” small, but the integer multiple may be “too big.” If there exists a factorization in which that multiple is less than some implementation-defined limit, the result shall belong to the perfect result set; otherwise, it belongs to the close result set. A multiplication P * Q of an operand of a fixed point type F by an operand of an integer type I, or vice- versa, and a division P / Q of an operand of a fixed point type F by an operand of an integer type I, are also allowed. In these cases, the result has a type of F; explicit conversion of the result is never required. The accuracy required in these cases is the same as that required for a multiplication F(P * Q) or a division F(P / Q) obtained by interpreting the operand of the integer type to have a fixed point type with a small of 1.0. The accuracy of the result of a conversion from an integer or fixed point type to a fixed point type, or from a fixed point type to an integer type, is the same as that of a fixed point multiplication of the source value by a fixed point operand having a small of 1.0 and a value of 1.0, as given by the foregoing rules. The result of a conversion from a floating point type to a fixed point type shall belong to the close result set. G.2.3 Model of Fixed Point Arithmetic 13 December 2012 716 Ada Reference Manual — 2012 Edition The result of a conversion of a universal_real operand to a fixed point type shall belong to the perfect result set. The possibility of overflow in the result of a predefined arithmetic operation or conversion yielding a result of a fixed point type T is analogous to that for floating point types, except for being related to the base range instead of the safe range. If all of the permitted results belong to the base range of T, then the implementation shall deliver one of the permitted results; otherwise, • • if T'Machine_Overflows is True, the implementation shall either deliver one of the permitted results or raise Constraint_Error; if T'Machine_Overflows is False, the result is implementation defined. 25 26 27 G.2.4 Accuracy Requirements for the Elementary Functions In the strict mode, the performance of Numerics.Generic_Elementary_Functions shall be as specified here. 1 Implementation Requirements When an exception is not raised, the result of evaluating a function in an instance EF of Numerics.Generic_Elementary_Functions belongs to a result interval, defined as the smallest model interval of EF.Float_Type that contains all the values of the form f · (1.0 + d), where f is the exact value of the corresponding mathematical function at the given parameter values, d is a real number, and |d| is less than or equal to the function's maximum relative error. The function delivers a value that belongs to the result interval when both of its bounds belong to the safe range of EF.Float_Type; otherwise, • • if EF.Float_Type'Machine_Overflows is True, the function either delivers a value that belongs to the result interval or raises Constraint_Error, signaling overflow; if EF.Float_Type'Machine_Overflows is False, the result is implementation defined. The maximum relative error exhibited by each function is as follows: • 2.0 · EF.Float_Type'Model_Epsilon, in the case of the Sqrt, Sin, and Cos functions; • 4.0 · EF.Float_Type'Model_Epsilon, in the case of the Log, Exp, Tan, Cot, and inverse trigonometric functions; and • 8.0 · EF.Float_Type'Model_Epsilon, in the case of the forward and inverse hyperbolic functions. The maximum relative error exhibited by the exponentiation operator, which depends on the values of the operands, is (4.0 + |Right · log(Left)| / 32.0) · EF.Float_Type'Model_Epsilon. The maximum relative error given above applies throughout the domain of the forward trigonometric functions when the Cycle parameter is specified. When the Cycle parameter is omitted, the maximum relative error given above applies only when the absolute value of the angle parameter X is less than or equal to some implementation-defined angle threshold, which shall be at least EF.Float_Type'Machine_- Radix EF.Float_Type'Machine_Mantissa/2. Beyond the angle threshold, the accuracy of the forward trigonometric functions is implementation defined. 2 3 4 5 6 7 8 9 10 The prescribed results specified in A.5.1 for certain functions at particular parameter values take precedence over the maximum relative error bounds; effectively, they narrow to a single value the result interval allowed by the maximum relative error bounds. Additional rules with a similar effect are given by table G-1 for the inverse trigonometric functions, at particular parameter values for which the mathematical result is possibly not a model number of EF.Float_Type (or is, indeed, even transcendental). In each table entry, the values of the parameters are such that the result lies on the axis between two 11/2 717 13 December 2012 Model of Fixed Point Arithmetic G.2.3 Ada Reference Manual — 2012 Edition quadrants; the corresponding accuracy rule, which takes precedence over the maximum relative error bounds, is that the result interval is the model interval of EF.Float_Type associated with the exact mathematical result given in the table. 12/1 This paragraph was deleted. 13 The last line of the table is meant to apply when EF.Float_Type'Signed_Zeros is False; the two lines just above it, when EF.Float_Type'Signed_Zeros is True and the parameter Y has a zero value with the indicated sign. Table G-1: Tightly Approximated Elementary Function Results Function Value of X Value of Y Arcsin Arcsin Arccos Arccos Arctan and Arccot Arctan and Arccot Arctan and Arccot Arctan and Arccot Arctan and Arccot 1.0 –1.0 0.0 –1.0 0.0 0.0 negative negative negative Exact Result when Cycle Specified Cycle/4.0 –Cycle/4.0 Cycle/4.0 Cycle/2.0 n.a. n.a. n.a. n.a. positive Cycle/4.0 negative –Cycle/4.0 +0.0 –0.0 0.0 Cycle/2.0 –Cycle/2.0 Cycle/2.0 Exact Result when Cycle Omitted π/2.0 –π/2.0 π/2.0 π π/2.0 –π/2.0 π –π π 14 15 16 17 18 19 The amount by which the result of an inverse trigonometric function is allowed to spill over into a quadrant adjacent to the one corresponding to the principal branch, as given in A.5.1, is limited. The rule is that the result belongs to the smallest model interval of EF.Float_Type that contains both boundaries of the quadrant corresponding to the principal branch. This rule also takes precedence over the maximum relative error bounds, effectively narrowing the result interval allowed by them. Finally, the following specifications also take precedence over the maximum relative error bounds: • The absolute value of the result of the Sin, Cos, and Tanh functions never exceeds one. • The absolute value of the result of the Coth function is never less than one. • The result of the Cosh function is never less than one. Implementation Advice The versions of the forward trigonometric functions without a Cycle parameter should not be implemented by calling the corresponding version with a Cycle parameter of 2.0*Numerics.Pi, since this will not provide the required accuracy in some portions of the domain. For the same reason, the version of Log without a Base parameter should not be implemented by calling the corresponding version with a Base parameter of Numerics.e. G.2.4 Accuracy Requirements for the Elementary Functions 13 December 2012 718 Ada Reference Manual — 2012 Edition G.2.5 Performance Requirements for Random Number Generation In the strict mode, the performance of Numerics.Float_Random and Numerics.Discrete_Random shall be as specified here. Implementation Requirements Two different calls to the time-dependent Reset procedure shall reset the generator to different states, provided that the calls are separated in time by at least one second and not more than fifty years. The implementation's representations of generator states and its algorithms for generating random numbers shall yield a period of at least 231–2; much longer periods are desirable but not required. The implementations of Numerics.Float_Random.Random and Numerics.Discrete_Random.Random shall pass at least 85% of the individual trials in a suite of statistical tests. For Numerics.Float_Random, the tests are applied directly to the floating point values generated (i.e., they are not converted to integers first), while for Numerics.Discrete_Random they are applied to the generated values of various discrete types. Each test suite performs 6 different tests, with each test repeated 10 times, yielding a total of 60 individual trials. An individual trial is deemed to pass if the chi-square value (or other statistic) calculated for the observed counts or distribution falls within the range of values corresponding to the 2.5 and 97.5 percentage points for the relevant degrees of freedom (i.e., it shall be neither too high nor too low). For the purpose of determining the degrees of freedom, measurement categories are combined whenever the expected counts are fewer than 5. G.2.6 Accuracy Requirements for Complex Arithmetic In the strict mode, the performance of Numerics.Generic_Complex_Types and Numerics.Generic_- Complex_Elementary_Functions shall be as specified here. Implementation Requirements When an exception is not raised, the result of evaluating a real function of an instance CT of Numerics.Generic_Complex_Types (i.e., a function that yields a value of subtype CT.Real'Base or CT.Imaginary) belongs to a result interval defined as for a real elementary function (see G.2.4). When an exception is not raised, each component of the result of evaluating a complex function of such an instance, or of an instance of Numerics.Generic_Complex_Elementary_Functions obtained by instantiating the latter with CT (i.e., a function that yields a value of subtype CT.Complex), also belongs to a result interval. The result intervals for the components of the result are either defined by a maximum relative error bound or by a maximum box error bound. When the result interval for the real (resp., imaginary) component is defined by maximum relative error, it is defined as for that of a real function, relative to the exact value of the real (resp., imaginary) part of the result of the corresponding mathematical function. When defined by maximum box error, the result interval for a component of the result is the smallest model interval of CT.Real that contains all the values of the corresponding part of f · (1.0 + d), where f is the exact complex value of the corresponding mathematical function at the given parameter values, d is complex, and |d| is less than or equal to the given maximum box error. The function delivers a value that belongs to the result interval (or a value both of whose components belong to their respective result intervals) when both bounds of the result interval(s) belong to the safe range of CT.Real; otherwise, 1 2 3 4 1 2 3 719 13 December 2012 Performance Requirements for Random Number Generation G.2.5 Ada Reference Manual — 2012 Edition 4 5 6/2 • • if CT.Real'Machine_Overflows is True, the function either delivers a value that belongs to the result interval (or a value both of whose components belong to their respective result intervals) or raises Constraint_Error, signaling overflow; if CT.Real'Machine_Overflows is False, the result is implementation defined. The error bounds for particular complex functions are tabulated in table G-2. In the table, the error bound is given as the coefficient of CT.Real'Model_Epsilon. 7/1 This paragraph was deleted. Table G-2: Error Bounds for Particular Complex Functions Nature of Result Nature of Bound Function or Operator Error Bound Modulus Argument Compose_From_Polar "*" (both operands complex) "/" (right operand complex) Sqrt Log Exp (complex parameter) Exp (imaginary parameter) Sin, Cos, Sinh, and Cosh Tan, Cot, Tanh, and Coth inverse trigonometric inverse hyperbolic real real complex complex complex complex complex complex complex complex complex complex complex max. rel. error max. rel. error max. rel. error max. box error max. box error max. rel. error max. box error max. rel. error max. rel. error max. rel. error max. rel. error max. rel. error max. rel. error 3.0 4.0 3.0 5.0 13.0 6.0 13.0 7.0 2.0 11.0 35.0 14.0 14.0 8 9 The maximum relative error given above applies throughout the domain of the Compose_From_Polar function when the Cycle parameter is specified. When the Cycle parameter is omitted, the maximum relative error applies only when the absolute value of the parameter Argument is less than or equal to the angle threshold (see G.2.4). For the Exp function, and for the forward hyperbolic (resp., trigonometric) functions, the maximum relative error given above likewise applies only when the absolute value of the imaginary (resp., real) component of the parameter X (or the absolute value of the parameter itself, in the case of the Exp function with a parameter of pure-imaginary type) is less than or equal to the angle threshold. For larger angles, the accuracy is implementation defined. The prescribed results specified in G.1.2 for certain functions at particular parameter values take precedence over the error bounds; effectively, they narrow to a single value the result interval allowed by the error bounds for a component of the result. Additional rules with a similar effect are given below for certain inverse trigonometric and inverse hyperbolic functions, at particular parameter values for which a component of the mathematical result is transcendental. In each case, the accuracy rule, which takes precedence over the error bounds, is that the result interval for the stated result component is the model interval of CT.Real associated with the component's exact mathematical value. The cases in question are as follows: G.2.6 Accuracy Requirements for Complex Arithmetic 13 December 2012 720 Ada Reference Manual — 2012 Edition • When the parameter X has the value zero, the real (resp., imaginary) component of the result of the Arccot (resp., Arccoth) function is in the model interval of CT.Real associated with the value π/2.0. • When the parameter X has the value one, the real component of the result of the Arcsin function is in the model interval of CT.Real associated with the value π/2.0. • When the parameter X has the value –1.0, the real component of the result of the Arcsin (resp., Arccos) function is in the model interval of CT.Real associated with the value –π/2.0 (resp., π). The amount by which a component of the result of an inverse trigonometric or inverse hyperbolic function is allowed to spill over into a quadrant adjacent to the one corresponding to the principal branch, as given in G.1.2, is limited. The rule is that the result belongs to the smallest model interval of CT.Real that contains both boundaries of the quadrant corresponding to the principal branch. This rule also takes precedence over the maximum error bounds, effectively narrowing the result interval allowed by them. Finally, the results allowed by the error bounds are narrowed by one further rule: The absolute value of each component of the result of the Exp function, for a pure-imaginary parameter, never exceeds one. The version of the Compose_From_Polar function without a Cycle parameter should not be implemented by calling the corresponding version with a Cycle parameter of 2.0*Numerics.Pi, since this will not provide the required accuracy in some portions of the domain. Implementation Advice G.3 Vector and Matrix Manipulation the manipulation of real vectors and matrices are provided Types and operations for in Generic_Real_Arrays, which is defined in G.3.1. Types and operations for the manipulation of complex vectors and matrices are provided in Generic_Complex_Arrays, which is defined in G.3.2. Both of these library units are generic children of the predefined package Numerics (see A.5). Nongeneric equivalents of these packages for each of the predefined floating point types are also provided as children of Numerics. G.3.1 Real Vectors and Matrices The generic library package Numerics.Generic_Real_Arrays has the following declaration: Static Semantics generic type Real is digits <>; package Ada.Numerics.Generic_Real_Arrays is pragma Pure(Generic_Real_Arrays); -- Types type Real_Vector is array (Integer range <>) of Real'Base; type Real_Matrix is array (Integer range <>, Integer range <>) of Real'Base; -- Subprograms for Real_Vector types -- Real_Vector arithmetic operations function "+" (Right : Real_Vector) return Real_Vector; function "-" (Right : Real_Vector) return Real_Vector; function "abs" (Right : Real_Vector) return Real_Vector; function "+" (Left, Right : Real_Vector) return Real_Vector; function "-" (Left, Right : Real_Vector) return Real_Vector; function "*" (Left, Right : Real_Vector) return Real'Base; 10 11 12 13/2 14 15 1/2 1/2 2/2 3/2 4/2 5/2 6/2 7/2 8/2 9/2 721 13 December 2012 Accuracy Requirements for Complex Arithmetic G.2.6 10/2 11/2 12/2 13/2 14/2 15/2 16/2 17/2 18/2 19/2 20/2 21/2 22/2 23/2 24/2 25/2 26/2 27/2 28/2 29/2 30/2 31/2 Ada Reference Manual — 2012 Edition function "abs" (Right : Real_Vector) return Real'Base; -- Real_Vector scaling operations function "*" (Left : Real'Base; Right : Real_Vector) return Real_Vector; function "*" (Left : Real_Vector; Right : Real'Base) return Real_Vector; function "/" (Left : Real_Vector; Right : Real'Base) return Real_Vector; -- Other Real_Vector operations function Unit_Vector (Index : Integer; Order : Positive; First : Integer := 1) return Real_Vector; -- Subprograms for Real_Matrix types -- Real_Matrix arithmetic operations function "+" (Right : Real_Matrix) return Real_Matrix; function "-" (Right : Real_Matrix) return Real_Matrix; function "abs" (Right : Real_Matrix) return Real_Matrix; function Transpose (X : Real_Matrix) return Real_Matrix; function "+" (Left, Right : Real_Matrix) return Real_Matrix; function "-" (Left, Right : Real_Matrix) return Real_Matrix; function "*" (Left, Right : Real_Matrix) return Real_Matrix; function "*" (Left, Right : Real_Vector) return Real_Matrix; function "*" (Left : Real_Vector; Right : Real_Matrix) return Real_Vector; function "*" (Left : Real_Matrix; Right : Real_Vector) return Real_Vector; -- Real_Matrix scaling operations function "*" (Left : Real'Base; Right : Real_Matrix) return Real_Matrix; function "*" (Left : Real_Matrix; Right : Real'Base) return Real_Matrix; function "/" (Left : Real_Matrix; Right : Real'Base) return Real_Matrix; -- Real_Matrix inversion and related operations function Solve (A : Real_Matrix; X : Real_Vector) return Real_Vector; function Solve (A, X : Real_Matrix) return Real_Matrix; function Inverse (A : Real_Matrix) return Real_Matrix; function Determinant (A : Real_Matrix) return Real'Base; -- Eigenvalues and vectors of a real symmetric matrix function Eigenvalues (A : Real_Matrix) return Real_Vector; procedure Eigensystem (A : in Real_Matrix; Values : out Real_Vector; Vectors : out Real_Matrix); -- Other Real_Matrix operations function Unit_Matrix (Order : Positive; First_1, First_2 : Integer := 1) return Real_Matrix; end Ada.Numerics.Generic_Real_Arrays; The library package Numerics.Real_Arrays is declared pure and defines the same types and subprograms as Numerics.Generic_Real_Arrays, except that the predefined type Float is systematically substituted for Real'Base throughout. Nongeneric equivalents for each of the other predefined floating point types are defined similarly, with the names Numerics.Short_Real_Arrays, Numerics.Long_Real_Arrays, etc. 32/2 Two types are defined and exported by Numerics.Generic_Real_Arrays. The composite type Real_Vector is provided to represent a vector with components of type Real; it is defined as an unconstrained, one- G.3.1 Real Vectors and Matrices 13 December 2012 722 Ada Reference Manual — 2012 Edition dimensional array with an index of type Integer. The composite type Real_Matrix is provided to represent a matrix with components of type Real; it is defined as an unconstrained, two-dimensional array with indices of type Integer. The effect of the various subprograms is as described below. In most cases the subprograms are described in terms of corresponding scalar operations of the type Real; any exception raised by those operations is propagated by the array operation. Moreover, the accuracy of the result for each individual component is as defined for the scalar operation unless stated otherwise. In the case of those operations which are defined to involve an inner product, Constraint_Error may be raised if an intermediate result is outside the range of Real'Base even though the mathematical final result would not be. function "+" (Right : Real_Vector) return Real_Vector; function "-" (Right : Real_Vector) return Real_Vector; function "abs" (Right : Real_Vector) return Real_Vector; Each operation returns the result of applying the corresponding operation of the type Real to each component of Right. The index range of the result is Right'Range. function "+" (Left, Right : Real_Vector) return Real_Vector; function "-" (Left, Right : Real_Vector) return Real_Vector; Each operation returns the result of applying the corresponding operation of the type Real to each component of Left and the matching component of Right. The index range of the result is Left'Range. Constraint_Error is raised if Left'Length is not equal to Right'Length. function "*" (Left, Right : Real_Vector) return Real'Base; This operation returns the inner product of Left and Right. Constraint_Error is raised if Left'Length is not equal to Right'Length. This operation involves an inner product. function "abs" (Right : Real_Vector) return Real'Base; This operation returns the L2-norm of Right (the square root of the inner product of the vector with itself). function "*" (Left : Real'Base; Right : Real_Vector) return Real_Vector; This operation returns the result of multiplying each component of Right by the scalar Left using the "*" operation of the type Real. The index range of the result is Right'Range. function "*" (Left : Real_Vector; Right : Real'Base) return Real_Vector; function "/" (Left : Real_Vector; Right : Real'Base) return Real_Vector; Each operation returns the result of applying the corresponding operation of the type Real to each component of Left and to the scalar Right. The index range of the result is Left'Range. function Unit_Vector (Index : Integer; Order : Positive; First : Integer := 1) return Real_Vector; This function returns a unit vector with Order components and a lower bound of First. All components are set to 0.0 except for the Index component which is set to 1.0. Constraint_Error is raised if Index < First, Index > First + Order – 1 or if First + Order – 1 > Integer'Last. function "+" (Right : Real_Matrix) return Real_Matrix; function "-" (Right : Real_Matrix) return Real_Matrix; function "abs" (Right : Real_Matrix) return Real_Matrix; Each operation returns the result of applying the corresponding operation of the type Real to each component of Right. The index ranges of the result are those of Right. 33/2 34/2 35/2 36/2 37/2 38/2 39/2 40/2 41/2 42/2 43/2 44/2 45/2 46/2 47/2 48/2 49/2 50/2 723 13 December 2012 Real Vectors and Matrices G.3.1 Ada Reference Manual — 2012 Edition 51/2 52/2 53/2 54/2 55/2 56/2 57/2 58/2 59/2 60/2 61/2 62/2 63/2 64/2 65/2 66/2 67/2 68/2 69/2 70/2 function Transpose (X : Real_Matrix) return Real_Matrix; This function returns the transpose of a matrix X. The first and second index ranges of the result are X'Range(2) and X'Range(1) respectively. function "+" (Left, Right : Real_Matrix) return Real_Matrix; function "-" (Left, Right : Real_Matrix) return Real_Matrix; Each operation returns the result of applying the corresponding operation of the type Real to each component of Left and the matching component of Right. The index ranges of the result are those of Left. Constraint_Error is raised if Left'Length(1) is not equal to Right'Length(1) or Left'Length(2) is not equal to Right'Length(2). function "*" (Left, Right : Real_Matrix) return Real_Matrix; This operation provides the standard mathematical operation for matrix multiplication. The first and second index ranges of the result are Left'Range(1) and Right'Range(2) respectively. Constraint_Error is raised if Left'Length(2) is not equal to Right'Length(1). This operation involves inner products. function "*" (Left, Right : Real_Vector) return Real_Matrix; This operation returns the outer product of a (column) vector Left by a (row) vector Right using the operation "*" of the type Real for computing the individual components. The first and second index ranges of the result are Left'Range and Right'Range respectively. function "*" (Left : Real_Vector; Right : Real_Matrix) return Real_Vector; This operation provides the standard mathematical operation for multiplication of a (row) vector Left by a matrix Right. The index range of the (row) vector result is Right'Range(2). Constraint_Error is raised if Left'Length is not equal to Right'Length(1). This operation involves inner products. function "*" (Left : Real_Matrix; Right : Real_Vector) return Real_Vector; This operation provides the standard mathematical operation for multiplication of a matrix Left by a (column) vector Right. The index range of the (column) vector result is Left'Range(1). Constraint_Error is raised if Left'Length(2) is not equal to Right'Length. This operation involves inner products. function "*" (Left : Real'Base; Right : Real_Matrix) return Real_Matrix; This operation returns the result of multiplying each component of Right by the scalar Left using the "*" operation of the type Real. The index ranges of the result are those of Right. function "*" (Left : Real_Matrix; Right : Real'Base) return Real_Matrix; function "/" (Left : Real_Matrix; Right : Real'Base) return Real_Matrix; Each operation returns the result of applying the corresponding operation of the type Real to each component of Left and to the scalar Right. The index ranges of the result are those of Left. function Solve (A : Real_Matrix; X : Real_Vector) return Real_Vector; This function returns a vector Y such that X is (nearly) equal to A * Y. This is the standard mathematical operation for solving a single set of linear equations. The index range of the result is A'Range(2). Constraint_Error is raised if A'Length(1), A'Length(2), and X'Length are not equal. Constraint_Error is raised if the matrix A is ill-conditioned. function Solve (A, X : Real_Matrix) return Real_Matrix; This function returns a matrix Y such that X is (nearly) equal to A * Y. This is the standard mathematical operation for solving several sets of linear equations. The index ranges of the G.3.1 Real Vectors and Matrices 13 December 2012 724 Ada Reference Manual — 2012 Edition result are A'Range(2) and X'Range(2). Constraint_Error is raised if A'Length(1), A'Length(2), and X'Length(1) are not equal. Constraint_Error is raised if the matrix A is ill-conditioned. function Inverse (A : Real_Matrix) return Real_Matrix; This function returns a matrix B such that A * B is (nearly) equal to the unit matrix. The index ranges of the result are A'Range(2) and A'Range(1). Constraint_Error is raised if A'Length(1) is not equal to A'Length(2). Constraint_Error is raised if the matrix A is ill-conditioned. function Determinant (A : Real_Matrix) return Real'Base; This function returns the determinant of the matrix A. Constraint_Error is raised if A'Length(1) is not equal to A'Length(2). function Eigenvalues(A : Real_Matrix) return Real_Vector; This function returns the eigenvalues of the symmetric matrix A as a vector sorted into order with the largest first. Constraint_Error is raised if A'Length(1) is not equal to A'Length(2). The index range of the result is A'Range(1). Argument_Error is raised if the matrix A is not symmetric. procedure Eigensystem(A : in Real_Matrix; Values : out Real_Vector; Vectors : out Real_Matrix); This procedure computes both the eigenvalues and eigenvectors of the symmetric matrix A. The out parameter Values is the same as that obtained by calling the function Eigenvalues. The out parameter Vectors is a matrix whose columns are the eigenvectors of the matrix A. The order of the columns corresponds to the order of the eigenvalues. The eigenvectors are normalized and mutually orthogonal (they are orthonormal), including when there are repeated eigenvalues. Constraint_Error is raised if A'Length(1) is not equal to A'Length(2), or if Values'Range is not equal to A'Range(1), or if the index ranges of the parameter Vectors are not equal to those of A. Argument_Error is raised if the matrix A is not symmetric. Constraint_Error is also raised in implementation-defined circumstances if the algorithm used does not converge quickly enough. function Unit_Matrix (Order : Positive; First_1, First_2 : Integer := 1) return Real_Matrix; This function returns a square unit matrix with Order**2 components and lower bounds of First_1 and First_2 (for the first and second index ranges respectively). All components are set to 0.0 except for the main diagonal, whose components are set to 1.0. Constraint_Error is raised if First_1 + Order – 1 > Integer'Last or First_2 + Order – 1 > Integer'Last. Implementation Requirements Accuracy requirements for the subprograms Solve, Inverse, Determinant, Eigenvalues and Eigensystem are implementation defined. For operations not involving an inner product, the accuracy requirements are those of the corresponding operations of the type Real in both the strict mode and the relaxed mode (see G.2). For operations involving an inner product, no requirements are specified in the relaxed mode. In the strict mode the modulus of the absolute error of the inner product X*Y shall not exceed g*abs(X)*abs(Y) where g is defined as g = X'Length * Real'Machine_Radix**(1 – Real'Model_Mantissa) For the L2-norm, no accuracy requirements are specified in the relaxed mode. In the strict mode the relative error on the norm shall not exceed g / 2.0 + 3.0 * Real'Model_Epsilon where g is defined as above. 725 13 December 2012 Real Vectors and Matrices G.3.1 71/2 72/2 73/2 74/2 75/2 76/2 77/2 78/3 79/2 80/2 81/2 82/2 83/2 84/2 85/2 Ada Reference Manual — 2012 Edition 86/2 Implementations shall document any techniques used to reduce cancellation errors such as extended precision arithmetic. Documentation Requirements 87/2 The nongeneric equivalent packages may, but need not, be actual instantiations of the generic package for the appropriate predefined type. Implementation Permissions 88/3 89/2 90/2 91/3 1/2 2/2 3/2 4/2 5/2 6/2 7/2 8/2 9/2 Implementation Advice Implementations should implement the Solve and Inverse functions using established techniques such as LU decomposition with row interchanges followed by back and forward substitution. Implementations are recommended to refine the result by performing an iteration on the residuals; if this is done, then it should be documented. It is not the intention that any special provision should be made to determine whether a matrix is ill- conditioned or not. The naturally occurring overflow (including division by zero) which will result from executing these functions with an ill-conditioned matrix and thus raise Constraint_Error is sufficient. The test that a matrix is symmetric should be performed by using the equality operator to compare the relevant components. An implementation should minimize the circumstances under which the algorithm used for Eigenvalues and Eigensystem fails to converge. G.3.2 Complex Vectors and Matrices Static Semantics The generic library package Numerics.Generic_Complex_Arrays has the following declaration: with Ada.Numerics.Generic_Real_Arrays, Ada.Numerics.Generic_Complex_Types; generic with package Real_Arrays is new Ada.Numerics.Generic_Real_Arrays (<>); use Real_Arrays; with package Complex_Types is new Ada.Numerics.Generic_Complex_Types (Real); use Complex_Types; package Ada.Numerics.Generic_Complex_Arrays is pragma Pure(Generic_Complex_Arrays); -- Types type Complex_Vector is array (Integer range <>) of Complex; type Complex_Matrix is array (Integer range <>, Integer range <>) of Complex; -- Subprograms for Complex_Vector types -- Complex_Vector selection, conversion and composition operations function Re (X : Complex_Vector) return Real_Vector; function Im (X : Complex_Vector) return Real_Vector; procedure Set_Re (X : in out Complex_Vector; Re : in Real_Vector); procedure Set_Im (X : in out Complex_Vector; Im : in Real_Vector); function Compose_From_Cartesian (Re : Real_Vector) return Complex_Vector; function Compose_From_Cartesian (Re, Im : Real_Vector) return Complex_Vector; G.3.1 Real Vectors and Matrices 13 December 2012 726 Ada Reference Manual — 2012 Edition function Modulus (X : Complex_Vector) return Real_Vector; function "abs" (Right : Complex_Vector) return Real_Vector renames Modulus; function Argument (X : Complex_Vector) return Real_Vector; function Argument (X : Complex_Vector; Cycle : Real'Base) return Real_Vector; function Compose_From_Polar (Modulus, Argument : Real_Vector) return Complex_Vector; function Compose_From_Polar (Modulus, Argument : Real_Vector; Cycle : Real'Base) return Complex_Vector; -- Complex_Vector arithmetic operations function "+" (Right : Complex_Vector) return Complex_Vector; function "-" (Right : Complex_Vector) return Complex_Vector; function Conjugate (X : Complex_Vector) return Complex_Vector; function "+" (Left, Right : Complex_Vector) return Complex_Vector; function "-" (Left, Right : Complex_Vector) return Complex_Vector; function "*" (Left, Right : Complex_Vector) return Complex; function "abs" (Right : Complex_Vector) return Real'Base; -- Mixed Real_Vector and Complex_Vector arithmetic operations function "+" (Left : Real_Vector; Right : Complex_Vector) return Complex_Vector; function "+" (Left : Complex_Vector; Right : Real_Vector) return Complex_Vector; function "-" (Left : Real_Vector; Right : Complex_Vector) return Complex_Vector; function "-" (Left : Complex_Vector; Right : Real_Vector) return Complex_Vector; function "*" (Left : Real_Vector; Right : Complex_Vector) return Complex; function "*" (Left : Complex_Vector; Right : Real_Vector) return Complex; -- Complex_Vector scaling operations function "*" (Left : Complex; Right : Complex_Vector) return Complex_Vector; function "*" (Left : Complex_Vector; Right : Complex) return Complex_Vector; function "/" (Left : Complex_Vector; Right : Complex) return Complex_Vector; function "*" (Left : Real'Base; Right : Complex_Vector) return Complex_Vector; function "*" (Left : Complex_Vector; Right : Real'Base) return Complex_Vector; function "/" (Left : Complex_Vector; Right : Real'Base) return Complex_Vector; -- Other Complex_Vector operations function Unit_Vector (Index : Integer; Order : Positive; First : Integer := 1) return Complex_Vector; -- Subprograms for Complex_Matrix types -- Complex_Matrix selection, conversion and composition operations function Re (X : Complex_Matrix) return Real_Matrix; function Im (X : Complex_Matrix) return Real_Matrix; procedure Set_Re (X : in out Complex_Matrix; Re : in Real_Matrix); procedure Set_Im (X : in out Complex_Matrix; Im : in Real_Matrix); 10/2 11/2 12/2 13/2 14/2 15/2 16/3 17/2 18/2 19/2 20/2 21/2 22/2 23/2 24/2 25/2 26/2 27/2 28/2 727 13 December 2012 Complex Vectors and Matrices G.3.2 Ada Reference Manual — 2012 Edition 29/2 30/2 31/2 32/2 33/2 34/2 35/2 36/2 37/2 38/2 39/2 40/2 41/2 42/2 43/2 function Compose_From_Cartesian (Re : Real_Matrix) return Complex_Matrix; function Compose_From_Cartesian (Re, Im : Real_Matrix) return Complex_Matrix; function Modulus (X : Complex_Matrix) return Real_Matrix; function "abs" (Right : Complex_Matrix) return Real_Matrix renames Modulus; function Argument (X : Complex_Matrix) return Real_Matrix; function Argument (X : Complex_Matrix; Cycle : Real'Base) return Real_Matrix; function Compose_From_Polar (Modulus, Argument : Real_Matrix) return Complex_Matrix; function Compose_From_Polar (Modulus, Argument : Real_Matrix; Cycle : Real'Base) return Complex_Matrix; -- Complex_Matrix arithmetic operations function "+" (Right : Complex_Matrix) return Complex_Matrix; function "-" (Right : Complex_Matrix) return Complex_Matrix; function Conjugate (X : Complex_Matrix) return Complex_Matrix; function Transpose (X : Complex_Matrix) return Complex_Matrix; function "+" (Left, Right : Complex_Matrix) return Complex_Matrix; function "-" (Left, Right : Complex_Matrix) return Complex_Matrix; function "*" (Left, Right : Complex_Matrix) return Complex_Matrix; function "*" (Left, Right : Complex_Vector) return Complex_Matrix; function "*" (Left : Complex_Vector; Right : Complex_Matrix) return Complex_Vector; function "*" (Left : Complex_Matrix; Right : Complex_Vector) return Complex_Vector; -- Mixed Real_Matrix and Complex_Matrix arithmetic operations function "+" (Left : Real_Matrix; Right : Complex_Matrix) return Complex_Matrix; function "+" (Left : Complex_Matrix; Right : Real_Matrix) return Complex_Matrix; function "-" (Left : Real_Matrix; Right : Complex_Matrix) return Complex_Matrix; function "-" (Left : Complex_Matrix; Right : Real_Matrix) return Complex_Matrix; function "*" (Left : Real_Matrix; Right : Complex_Matrix) return Complex_Matrix; function "*" (Left : Complex_Matrix; Right : Real_Matrix) return Complex_Matrix; function "*" (Left : Real_Vector; Right : Complex_Vector) return Complex_Matrix; function "*" (Left : Complex_Vector; Right : Real_Vector) return Complex_Matrix; function "*" (Left : Real_Vector; Right : Complex_Matrix) return Complex_Vector; function "*" (Left : Complex_Vector; Right : Real_Matrix) return Complex_Vector; function "*" (Left : Real_Matrix; Right : Complex_Vector) return Complex_Vector; function "*" (Left : Complex_Matrix; Right : Real_Vector) return Complex_Vector; -- Complex_Matrix scaling operations function "*" (Left : Complex; Right : Complex_Matrix) return Complex_Matrix; function "*" (Left : Complex_Matrix; Right : Complex) return Complex_Matrix; function "/" (Left : Complex_Matrix; Right : Complex) return Complex_Matrix; G.3.2 Complex Vectors and Matrices 13 December 2012 728 Ada Reference Manual — 2012 Edition function "*" (Left : Real'Base; Right : Complex_Matrix) return Complex_Matrix; function "*" (Left : Complex_Matrix; Right : Real'Base) return Complex_Matrix; function "/" (Left : Complex_Matrix; Right : Real'Base) return Complex_Matrix; -- Complex_Matrix inversion and related operations function Solve (A : Complex_Matrix; X : Complex_Vector) return Complex_Vector; function Solve (A, X : Complex_Matrix) return Complex_Matrix; function Inverse (A : Complex_Matrix) return Complex_Matrix; function Determinant (A : Complex_Matrix) return Complex; -- Eigenvalues and vectors of a Hermitian matrix function Eigenvalues(A : Complex_Matrix) return Real_Vector; procedure Eigensystem(A : in Complex_Matrix; Values : out Real_Vector; Vectors : out Complex_Matrix); -- Other Complex_Matrix operations function Unit_Matrix (Order : Positive; First_1, First_2 : Integer := 1) return Complex_Matrix; end Ada.Numerics.Generic_Complex_Arrays; The library package Numerics.Complex_Arrays is declared pure and defines the same types and is subprograms as Numerics.Generic_Complex_Arrays, except systematically substituted for Real'Base, and the Real_Vector and Real_Matrix types exported by Numerics.Real_Arrays are systematically substituted for Real_Vector and Real_Matrix, and the Complex type exported by Numerics.Complex_Types is systematically substituted for Complex, throughout. Nongeneric equivalents for each of the other predefined floating point types are defined similarly, with the names Numerics.Short_Complex_Arrays, Numerics.Long_Complex_Arrays, etc. the predefined type Float that Two types are defined and exported by Numerics.Generic_Complex_Arrays. The composite type Complex_Vector is provided to represent a vector with components of type Complex; it is defined as an unconstrained one-dimensional array with an index of type Integer. The composite type Complex_Matrix is provided to represent a matrix with components of type Complex; it is defined as an unconstrained, two- dimensional array with indices of type Integer. The effect of the various subprograms is as described below. In many cases they are described in terms of corresponding scalar operations in Numerics.Generic_Complex_Types. Any exception raised by those operations is propagated by the array subprogram. Moreover, any constraints on the parameters and the accuracy of the result for each individual component are as defined for the scalar operation. In the case of those operations which are defined to involve an inner product, Constraint_Error may be raised if an intermediate result has a component outside the range of Real'Base even though the final mathematical result would not. function Re (X : Complex_Vector) return Real_Vector; function Im (X : Complex_Vector) return Real_Vector; Each function returns a vector of the specified Cartesian components of X. The index range of the result is X'Range. procedure Set_Re (X : in out Complex_Vector; Re : in Real_Vector); procedure Set_Im (X : in out Complex_Vector; Im : in Real_Vector); Each procedure replaces the specified (Cartesian) component of each of the components of X by the value of the matching component of Re or Im; the other (Cartesian) component of each of 729 13 December 2012 Complex Vectors and Matrices G.3.2 44/2 45/2 46/2 47/2 48/2 49/2 50/2 51/2 52/2 53/2 54/2 55/2 56/2 57/2 58/2 59/2 60/2 Ada Reference Manual — 2012 Edition the components is unchanged. Constraint_Error is raised if X'Length is not equal to Re'Length or Im'Length. function Compose_From_Cartesian (Re : Real_Vector) return Complex_Vector; function Compose_From_Cartesian (Re, Im : Real_Vector) return Complex_Vector; Each function constructs a vector of Complex results (in Cartesian representation) formed from given vectors of Cartesian components; when only the real components are given, imaginary components of zero are assumed. The index range of the result is Re'Range. Constraint_Error is raised if Re'Length is not equal to Im'Length. function Modulus (X : Complex_Vector) return Real_Vector; function "abs" (Right : Complex_Vector) return Real_Vector renames Modulus; function Argument (X : Complex_Vector) return Real_Vector; function Argument (X : Complex_Vector; Cycle : Real'Base) return Real_Vector; Each function calculates and returns a vector of the specified polar components of X or Right using the corresponding function in numerics.generic_complex_types. The index range of the result is X'Range or Right'Range. function Compose_From_Polar (Modulus, Argument : Real_Vector) return Complex_Vector; function Compose_From_Polar (Modulus, Argument : Real_Vector; Cycle : Real'Base) return Complex_Vector; Each function constructs a vector of Complex results (in Cartesian representation) formed from given vectors of polar components using in numerics.- generic_complex_types on matching components of Modulus and Argument. The index range of the result is Modulus'Range. Constraint_Error is raised if Modulus'Length is not equal to Argument'Length. the corresponding function function "+" (Right : Complex_Vector) return Complex_Vector; function "-" (Right : Complex_Vector) return Complex_Vector; Each operation returns the result of applying the corresponding operation in numerics.- generic_complex_types to each component of Right. The index range of the result is Right'Range. function Conjugate (X : Complex_Vector) return Complex_Vector; This function returns the result of applying the appropriate function Conjugate in numerics.- generic_complex_types to each component of X. The index range of the result is X'Range. function "+" (Left, Right : Complex_Vector) return Complex_Vector; function "-" (Left, Right : Complex_Vector) return Complex_Vector; Each operation returns the result of applying the corresponding operation in numerics.- generic_complex_types to each component of Left and the matching component of Right. The index range of the result is Left'Range. Constraint_Error is raised if Left'Length is not equal to Right'Length. function "*" (Left, Right : Complex_Vector) return Complex; This operation returns the inner product of Left and Right. Constraint_Error is raised if Left'Length is not equal to Right'Length. This operation involves an inner product. 61/2 62/2 63/2 64/2 65/2 66/2 67/2 68/2 69/2 70/2 71/2 72/2 73/2 74/2 G.3.2 Complex Vectors and Matrices 13 December 2012 730 Ada Reference Manual — 2012 Edition function "abs" (Right : Complex_Vector) return Real'Base; This operation returns the Hermitian L2-norm of Right (the square root of the inner product of the vector with its conjugate). function "+" (Left : Real_Vector; Right : Complex_Vector) return Complex_Vector; function "+" (Left : Complex_Vector; Right : Real_Vector) return Complex_Vector; function "-" (Left : Real_Vector; Right : Complex_Vector) return Complex_Vector; function "-" (Left : Complex_Vector; Right : Real_Vector) return Complex_Vector; Each operation returns the result of applying the corresponding operation in numerics.- generic_complex_types to each component of Left and the matching component of Right. The index range of the result is Left'Range. Constraint_Error is raised if Left'Length is not equal to Right'Length. function "*" (Left : Real_Vector; Right : Complex_Vector) return Complex; function "*" (Left : Complex_Vector; Right : Real_Vector) return Complex; Each operation returns the inner product of Left and Right. Constraint_Error is raised if Left'Length is not equal to Right'Length. These operations involve an inner product. function "*" (Left : Complex; Right : Complex_Vector) return Complex_Vector; This operation returns the result of multiplying each component of Right by the complex number Left using the appropriate operation "*" in numerics.generic_complex_types. The index range of the result is Right'Range. function "*" (Left : Complex_Vector; Right : Complex) return Complex_Vector; function "/" (Left : Complex_Vector; Right : Complex) return Complex_Vector; Each operation returns the result of applying the corresponding operation in numerics.- generic_complex_types to each component of the vector Left and the complex number Right. The index range of the result is Left'Range. function "*" (Left : Real'Base; Right : Complex_Vector) return Complex_Vector; This operation returns the result of multiplying each component of Right by the real number Left using the appropriate operation "*" in numerics.generic_complex_types. The index range of the result is Right'Range. function "*" (Left : Complex_Vector; Right : Real'Base) return Complex_Vector; function "/" (Left : Complex_Vector; Right : Real'Base) return Complex_Vector; Each operation returns the result of applying the corresponding operation in numerics.- generic_complex_types to each component of the vector Left and the real number Right. The index range of the result is Left'Range. function Unit_Vector (Index : Integer; Order : Positive; First : Integer := 1) return Complex_Vector; This function returns a unit vector with Order components and a lower bound of First. All components are set to (0.0, 0.0) except for the Index component which is set to (1.0, 0.0). Constraint_Error is raised if Index < First, Index > First + Order – 1, or if First + Order – 1 > Integer'Last. 75/3 76/2 77/2 78/2 79/2 80/2 81/2 82/2 83/2 84/2 85/2 86/2 87/2 88/2 89/2 90/2 731 13 December 2012 Complex Vectors and Matrices G.3.2 Ada Reference Manual — 2012 Edition 91/2 92/2 93/2 94/2 95/2 96/2 97/2 98/2 99/2 100/2 101/2 102/2 103/2 104/2 function Re (X : Complex_Matrix) return Real_Matrix; function Im (X : Complex_Matrix) return Real_Matrix; Each function returns a matrix of the specified Cartesian components of X. The index ranges of the result are those of X. procedure Set_Re (X : in out Complex_Matrix; Re : in Real_Matrix); procedure Set_Im (X : in out Complex_Matrix; Im : in Real_Matrix); Each procedure replaces the specified (Cartesian) component of each of the components of X by the value of the matching component of Re or Im; the other (Cartesian) component of each of the components is unchanged. Constraint_Error is raised if X'Length(1) is not equal to Re'Length(1) or Im'Length(1) or if X'Length(2) is not equal to Re'Length(2) or Im'Length(2). function Compose_From_Cartesian (Re : Real_Matrix) return Complex_Matrix; function Compose_From_Cartesian (Re, Im : Real_Matrix) return Complex_Matrix; Each function constructs a matrix of Complex results (in Cartesian representation) formed from given matrices of Cartesian components; when only the real components are given, imaginary components of zero are assumed. The index ranges of the result are those of Re. Constraint_Error is raised if Re'Length(1) is not equal to Im'Length(1) or Re'Length(2) is not equal to Im'Length(2). function Modulus (X : Complex_Matrix) return Real_Matrix; function "abs" (Right : Complex_Matrix) return Real_Matrix renames Modulus; function Argument (X : Complex_Matrix) return Real_Matrix; function Argument (X : Complex_Matrix; Cycle : Real'Base) return Real_Matrix; Each function calculates and returns a matrix of the specified polar components of X or Right using the corresponding function in numerics.generic_complex_types. The index ranges of the result are those of X or Right. function Compose_From_Polar (Modulus, Argument : Real_Matrix) return Complex_Matrix; function Compose_From_Polar (Modulus, Argument : Real_Matrix; Cycle : Real'Base) return Complex_Matrix; Each function constructs a matrix of Complex results (in Cartesian representation) formed from given matrices of polar components using in numerics.- generic_complex_types on matching components of Modulus and Argument. The index ranges of the result are those of Modulus. Constraint_Error is raised if Modulus'Length(1) is not equal to Argument'Length(1) or Modulus'Length(2) is not equal to Argument'Length(2). the corresponding function function "+" (Right : Complex_Matrix) return Complex_Matrix; function "-" (Right : Complex_Matrix) return Complex_Matrix; Each operation returns the result of applying the corresponding operation in numerics.- generic_complex_types to each component of Right. The index ranges of the result are those of Right. function Conjugate (X : Complex_Matrix) return Complex_Matrix; This function returns the result of applying the appropriate function Conjugate in numerics.- generic_complex_types to each component of X. The index ranges of the result are those of X. G.3.2 Complex Vectors and Matrices 13 December 2012 732 Ada Reference Manual — 2012 Edition function Transpose (X : Complex_Matrix) return Complex_Matrix; This function returns the transpose of a matrix X. The first and second index ranges of the result are X'Range(2) and X'Range(1) respectively. function "+" (Left, Right : Complex_Matrix) return Complex_Matrix; function "-" (Left, Right : Complex_Matrix) return Complex_Matrix; Each operation returns the result of applying the corresponding operation in numerics.- generic_complex_types to each component of Left and the matching component of Right. The index ranges of the result are those of Left. Constraint_Error is raised if Left'Length(1) is not equal to Right'Length(1) or Left'Length(2) is not equal to Right'Length(2). function "*" (Left, Right : Complex_Matrix) return Complex_Matrix; This operation provides the standard mathematical operation for matrix multiplication. The first and second index ranges of the result are Left'Range(1) and Right'Range(2) respectively. Constraint_Error is raised if Left'Length(2) is not equal to Right'Length(1). This operation involves inner products. function "*" (Left, Right : Complex_Vector) return Complex_Matrix; This operation returns the outer product of a (column) vector Left by a (row) vector Right using the appropriate operation "*" in numerics.generic_complex_types for computing the individual components. The first and second index ranges of the result are Left'Range and Right'Range respectively. function "*" (Left : Complex_Vector; Right : Complex_Matrix) return Complex_Vector; This operation provides the standard mathematical operation for multiplication of a (row) vector Left by a matrix Right. The index range of the (row) vector result is Right'Range(2). Constraint_Error is raised if Left'Length is not equal to Right'Length(1). This operation involves inner products. function "*" (Left : Complex_Matrix; Right : Complex_Vector) return Complex_Vector; This operation provides the standard mathematical operation for multiplication of a matrix Left by a (column) vector Right. The index range of the (column) vector result is Left'Range(1). Constraint_Error is raised if Left'Length(2) is not equal to Right'Length. This operation involves inner products. function "+" (Left : Real_Matrix; Right : Complex_Matrix) return Complex_Matrix; function "+" (Left : Complex_Matrix; Right : Real_Matrix) return Complex_Matrix; function "-" (Left : Real_Matrix; Right : Complex_Matrix) return Complex_Matrix; function "-" (Left : Complex_Matrix; Right : Real_Matrix) return Complex_Matrix; 105/2 106/2 107/2 108/2 109/2 110/2 111/2 112/2 113/2 114/2 115/2 116/2 117/2 Each operation returns the result of applying the corresponding operation in numerics.- generic_complex_types to each component of Left and the matching component of Right. The index ranges of the result are those of Left. Constraint_Error is raised if Left'Length(1) is not equal to Right'Length(1) or Left'Length(2) is not equal to Right'Length(2). 118/2 733 13 December 2012 Complex Vectors and Matrices G.3.2 Ada Reference Manual — 2012 Edition 119/2 120/2 121/2 122/2 123/2 124/2 125/2 126/2 127/2 128/2 129/2 130/2 131/2 132/2 function "*" (Left : Real_Matrix; Right : Complex_Matrix) return Complex_Matrix; function "*" (Left : Complex_Matrix; Right : Real_Matrix) return Complex_Matrix; Each operation provides the standard mathematical operation for matrix multiplication. The first and second index ranges of the result are Left'Range(1) and Right'Range(2) respectively. Constraint_Error is raised if Left'Length(2) is not equal to Right'Length(1). These operations involve inner products. function "*" (Left : Real_Vector; Right : Complex_Vector) return Complex_Matrix; function "*" (Left : Complex_Vector; Right : Real_Vector) return Complex_Matrix; Each operation returns the outer product of a (column) vector Left by a (row) vector Right using the appropriate operation "*" in numerics.generic_complex_types for computing the individual components. The first and second index ranges of the result are Left'Range and Right'Range respectively. function "*" (Left : Real_Vector; Right : Complex_Matrix) return Complex_Vector; function "*" (Left : Complex_Vector; Right : Real_Matrix) return Complex_Vector; Each operation provides the standard mathematical operation for multiplication of a (row) vector Left by a matrix Right. The index range of the (row) vector result is Right'Range(2). Constraint_Error is raised if Left'Length is not equal to Right'Length(1). These operations involve inner products. function "*" (Left : Real_Matrix; Right : Complex_Vector) return Complex_Vector; function "*" (Left : Complex_Matrix; Right : Real_Vector) return Complex_Vector; Each operation provides the standard mathematical operation for multiplication of a matrix Left by a (column) vector Right. The index range of the (column) vector result is Left'Range(1). Constraint_Error is raised if Left'Length(2) is not equal to Right'Length. These operations involve inner products. function "*" (Left : Complex; Right : Complex_Matrix) return Complex_Matrix; This operation returns the result of multiplying each component of Right by the complex number Left using the appropriate operation "*" in numerics.generic_complex_types. The index ranges of the result are those of Right. function "*" (Left : Complex_Matrix; Right : Complex) return Complex_Matrix; function "/" (Left : Complex_Matrix; Right : Complex) return Complex_Matrix; Each operation returns the result of applying the corresponding operation in numerics.- generic_complex_types to each component of the matrix Left and the complex number Right. The index ranges of the result are those of Left. function "*" (Left : Real'Base; Right : Complex_Matrix) return Complex_Matrix; This operation returns the result of multiplying each component of Right by the real number Left using the appropriate operation "*" in numerics.generic_complex_types. The index ranges of the result are those of Right. G.3.2 Complex Vectors and Matrices 13 December 2012 734 Ada Reference Manual — 2012 Edition function "*" (Left : Complex_Matrix; Right : Real'Base) return Complex_Matrix; function "/" (Left : Complex_Matrix; Right : Real'Base) return Complex_Matrix; Each operation returns the result of applying the corresponding operation in numerics.- generic_complex_types to each component of the matrix Left and the real number Right. The index ranges of the result are those of Left. function Solve (A : Complex_Matrix; X : Complex_Vector) return Complex_Vector; This function returns a vector Y such that X is (nearly) equal to A * Y. This is the standard mathematical operation for solving a single set of linear equations. The index range of the result is A'Range(2). Constraint_Error is raised if A'Length(1), A'Length(2), and X'Length are not equal. Constraint_Error is raised if the matrix A is ill-conditioned. function Solve (A, X : Complex_Matrix) return Complex_Matrix; This function returns a matrix Y such that X is (nearly) equal to A * Y. This is the standard mathematical operation for solving several sets of linear equations. The index ranges of the result are A'Range(2) and X'Range(2). Constraint_Error is raised if A'Length(1), A'Length(2), and X'Length(1) are not equal. Constraint_Error is raised if the matrix A is ill-conditioned. function Inverse (A : Complex_Matrix) return Complex_Matrix; This function returns a matrix B such that A * B is (nearly) equal to the unit matrix. The index ranges of the result are A'Range(2) and A'Range(1). Constraint_Error is raised if A'Length(1) is not equal to A'Length(2). Constraint_Error is raised if the matrix A is ill-conditioned. function Determinant (A : Complex_Matrix) return Complex; This function returns the determinant of the matrix A. Constraint_Error is raised if A'Length(1) is not equal to A'Length(2). function Eigenvalues(A : Complex_Matrix) return Real_Vector; This function returns the eigenvalues of the Hermitian matrix A as a vector sorted into order with the largest first. Constraint_Error is raised if A'Length(1) is not equal to A'Length(2). The index range of the result is A'Range(1). Argument_Error is raised if the matrix A is not Hermitian. procedure Eigensystem(A : in Complex_Matrix; Values : out Real_Vector; Vectors : out Complex_Matrix); This procedure computes both the eigenvalues and eigenvectors of the Hermitian matrix A. The out parameter Values is the same as that obtained by calling the function Eigenvalues. The out parameter Vectors is a matrix whose columns are the eigenvectors of the matrix A. The order of the columns corresponds to the order of the eigenvalues. The eigenvectors are mutually orthonormal, including when there are repeated eigenvalues. Constraint_Error is raised if A'Length(1) is not equal to A'Length(2), or if Values'Range is not equal to A'Range(1), or if the index ranges of the parameter Vectors are not equal to those of A. Argument_Error is raised if the matrix A is not Hermitian. Constraint_Error is also raised in implementation-defined circumstances if the algorithm used does not converge quickly enough. 133/2 134/2 135/2 136/2 137/2 138/2 139/2 140/2 141/2 142/2 143/2 144/2 145/2 146/3 735 13 December 2012 Complex Vectors and Matrices G.3.2 Ada Reference Manual — 2012 Edition 147/2 148/2 149/2 150/2 151/2 152/2 153/2 154/2 function Unit_Matrix (Order : Positive; First_1, First_2 : Integer := 1) return Complex_Matrix; This function returns a square unit matrix with Order**2 components and lower bounds of First_1 and First_2 (for the first and second index ranges respectively). All components are set to (0.0, 0.0) except for the main diagonal, whose components are set to (1.0, 0.0). Constraint_Error is raised if First_1 + Order – 1 > Integer'Last or First_2 + Order – 1 > Integer'Last. Implementation Requirements Accuracy requirements for the subprograms Solve, Inverse, Determinant, Eigenvalues and Eigensystem are implementation defined. For operations not involving an inner product, the accuracy requirements are those of the corresponding operations of the type Real'Base and Complex in both the strict mode and the relaxed mode (see G.2). For operations involving an inner product, no requirements are specified in the relaxed mode. In the strict mode the modulus of the absolute error of the inner product X*Y shall not exceed g*abs(X)*abs(Y) where g is defined as g = X'Length * Real'Machine_Radix**(1 – Real'Model_Mantissa) for mixed complex and real operands g = sqrt(2.0) * X'Length * Real'Machine_Radix**(1 – Real'Model_Mantissa) for two complex operands For the L2-norm, no accuracy requirements are specified in the relaxed mode. In the strict mode the relative error on the norm shall not exceed g / 2.0 + 3.0 * Real'Model_Epsilon where g has the definition appropriate for two complex operands. 155/2 Implementations shall document any techniques used to reduce cancellation errors such as extended precision arithmetic. Documentation Requirements 156/2 157/2 158/3 159/2 Implementation Permissions The nongeneric equivalent packages may, but need not, be actual instantiations of the generic package for the appropriate predefined type. Although many operations are defined in terms of operations from numerics.generic_complex_types, they need not be implemented by calling those operations provided that the effect is the same. Implementation Advice Implementations should implement the Solve and Inverse functions using established techniques. Implementations are recommended to refine the result by performing an iteration on the residuals; if this is done, then it should be documented. It is not the intention that any special provision should be made to determine whether a matrix is ill- conditioned or not. The naturally occurring overflow (including division by zero) which will result from executing these functions with an ill-conditioned matrix and thus raise Constraint_Error is sufficient. 160/2 The test that a matrix is Hermitian should use the equality operator to compare the real components and negation followed by equality to compare the imaginary components (see G.2.1). 160.1/3 An implementation should minimize the circumstances under which the algorithm used for Eigenvalues and Eigensystem fails to converge. G.3.2 Complex Vectors and Matrices 13 December 2012 736 Implementations should not perform operations on mixed complex and real operands by first converting the real operand to complex. See G.1.1. 161/2 Ada Reference Manual — 2012 Edition 737 13 December 2012 Complex Vectors and Matrices G.3.2 Ada Reference Manual — 2012 Edition Annex H (normative) High Integrity Systems This Annex addresses requirements for high integrity systems (including safety-critical systems and security-critical systems). It provides facilities and specifies documentation requirements that relate to several needs: • Understanding program execution; • Reviewing object code; • Restricting language constructs whose usage might complicate the demonstration of program correctness Execution understandability is supported by pragma Normalize_Scalars, and also by requirements for the implementation to document the effect of a program in the presence of a bounded error or where the language rules leave the effect unspecified. The pragmas Reviewable and Restrictions relate to the other requirements addressed by this Annex. NOTES 1 The Valid attribute (see 13.9.2) is also useful in addressing these needs, to avoid problems that could otherwise arise from scalars that have values outside their declared range constraints. H.1 Pragma Normalize_Scalars This pragma ensures that an otherwise uninitialized scalar object is set to a predictable value, but out of range if possible. The form of a pragma Normalize_Scalars is as follows: pragma Normalize_Scalars; Syntax Post-Compilation Rules Pragma Normalize_Scalars is a configuration pragma. It applies to all compilation_units included in a partition. If a pragma Normalize_Scalars applies, the implementation shall document the implicit initial values for scalar subtypes, and shall identify each case in which such a value is used and is not an invalid representation. Documentation Requirements Implementation Advice Whenever possible, the implicit initial values for a scalar subtype should be an invalid representation (see 13.9.1). NOTES 2 The initialization requirement applies to uninitialized scalar objects that are subcomponents of composite objects, to allocated objects, and to stand-alone objects. It also applies to scalar out parameters. Scalar subcomponents of composite out parameters are initialized to the corresponding part of the actual, by virtue of 6.4.1. 1/2 2 3 4 4.1 5 6 1 2 3 4 5/2 6/2 7 739 13 December 2012 High Integrity Systems H Ada Reference Manual — 2012 Edition 8 9 1 2 3 The initialization requirement does not apply to a scalar for which pragma Import has been specified, since initialization of an imported object is performed solely by the foreign language environment (see B.1). 4 The use of pragma Normalize_Scalars in conjunction with Pragma Restrictions(No_Exceptions) may result in erroneous execution (see H.4). H.2 Documentation of Implementation Decisions Documentation Requirements The implementation shall document the range of effects for each situation that the language rules identify as either a bounded error or as having an unspecified effect. If the implementation can constrain the effects of erroneous execution for a given construct, then it shall document such constraints. The documentation might be provided either independently of any compilation unit or partition, or as part of an annotated listing for a given unit or partition. See also 1.1.3, and 1.1.2. NOTES 5 Among the situations to be documented are the conventions chosen for parameter passing, the methods used for the management of run-time storage, and the method used to evaluate numeric expressions if this involves extended range or extra precision. H.3 Reviewable Object Code 1 Object code review and validation are supported by pragmas Reviewable and Inspection_Point. H.3.1 Pragma Reviewable This pragma directs the implementation to provide information to facilitate analysis and review of a program's object code, in particular to allow determination of execution time and storage usage and to identify the correspondence between the source and object programs. The form of a pragma Reviewable is as follows: pragma Reviewable; Syntax Post-Compilation Rules Pragma Reviewable is a configuration pragma. It applies to all compilation_units included in a partition. Implementation Requirements The implementation shall provide the following information for any compilation unit to which such a pragma applies: • Where compiler-generated run-time checks remain; • An identification of any construct with a language-defined check that is recognized prior to run time as certain to fail if executed (even if the generation of run-time checks has been suppressed); • For each read of a scalar object, an identification of the read as either “known to be initialized,” or “possibly uninitialized,” independent of whether pragma Normalize_Scalars applies; • Where run-time support routines are implicitly invoked; 1 2 3 4 5 6 7 8/2 9 H.1 Pragma Normalize_Scalars 13 December 2012 740 Ada Reference Manual — 2012 Edition • An object code listing, including: • Machine instructions, with relative offsets; • Where each data object is stored during its lifetime; • Correspondence with the source program, including an identification of the code produced per declaration and per statement. • An identification of each construct for which the implementation detects the possibility of erroneous execution; • For each subprogram, block, task, or other construct implemented by reserving and subsequently freeing an area on a run-time stack, an identification of the length of the fixed-size portion of the area and an indication of whether the non-fixed size portion is reserved on the stack or in a dynamically-managed storage region. The implementation shall provide the following information for any partition to which the pragma applies: • An object code listing of the entire partition, including initialization and finalization code as well as run-time system components, and with an identification of those instructions and data that will be relocated at load time; • A description of the run-time model relevant to the partition. The implementation shall provide control- and data-flow information, both within each compilation unit and across the compilation units of the partition. Implementation Advice The implementation should provide the above information in both a human-readable and machine-readable form, and should document the latter so as to ease further processing by automated tools. Object code listings should be provided both in a symbolic format and also in an appropriate numeric format (such as hexadecimal or octal). NOTES 6 The order of elaboration of library units will be documented even in the absence of pragma Reviewable (see 10.2). H.3.2 Pragma Inspection_Point An occurrence of a pragma Inspection_Point identifies a set of objects each of whose values is to be available at the point(s) during program execution corresponding to the position of the pragma in the compilation unit. The purpose of such a pragma is to facilitate code validation. The form of a pragma Inspection_Point is as follows: pragma Inspection_Point[(object_name {, object_name})]; Syntax Legality Rules A pragma Inspection_Point is allowed wherever a declarative_item or statement is allowed. Each object_name shall statically denote the declaration of an object. 10 11 12 13 14 15 16 17 18 18.1 19 20 21 1 2 3 4 An inspection point is a point in the object code corresponding to the occurrence of a pragma Inspection_- Point in the compilation unit. An object is inspectable at an inspection point if the corresponding pragma 5/2 Static Semantics 741 13 December 2012 Pragma Reviewable H.3.1 Ada Reference Manual — 2012 Edition Inspection_Point either has an argument denoting that object, or has no arguments and the declaration of the object is visible at the inspection point. Execution of a pragma Inspection_Point has no effect. Dynamic Semantics Reaching an inspection point is an external interaction with respect to the values of the inspectable objects at that point (see 1.1.3). Implementation Requirements For each inspection point, the implementation shall identify a mapping between each inspectable object and the machine resources (such as memory locations or registers) from which the object's value can be obtained. Documentation Requirements NOTES 7 The implementation is not allowed to perform “dead store elimination” on the last assignment to a variable prior to a point where the variable is inspectable. Thus an inspection point has the effect of an implicit read of each of its inspectable objects. 8 Inspection points are useful in maintaining a correspondence between the state of the program in source code terms, and the machine state during the program's execution. Assertions about the values of program objects can be tested in machine terms at inspection points. Object code between inspection points can be processed by automated tools to verify programs mechanically. 9 The identification of the mapping from source program objects to machine resources is allowed to be in the form of an annotated object listing, in human-readable or tool-processable form. 6 7 8 9/2 10 11 H.4 High Integrity Restrictions 1/3 This subclause defines restrictions that can be used with pragma Restrictions (see 13.12); these facilitate the demonstration of program correctness by allowing tailored versions of the run-time system. 2/2 3/2 4 5 6 7 This paragraph was deleted. The following restriction_identifiers are language defined: Static Semantics Tasking-related restriction: No_Protected_Types There are no declarations of protected types or protected objects. Memory-management related restrictions: No_Allocators There are no occurrences of an allocator. 8/1 No_Local_Allocators Allocators are prohibited in subprograms, generic subprograms, tasks, and entry bodies. 8.1/3 No_Anonymous_Allocators There are no allocators of anonymous access types. 8.2/3 No_Coextensions There are no coextensions. See 3.10.2. H.3.2 Pragma Inspection_Point 13 December 2012 742 Ada Reference Manual — 2012 Edition No_Access_Parameter_Allocators Allocators are not permitted as the actual parameter to an access parameter. See 6.1. This paragraph was deleted. Immediate_Reclamation Except for storage occupied by objects created by allocators and not deallocated via unchecked deallocation, any storage reserved at run time for an object is immediately reclaimed when the object no longer exists. Exception-related restriction: No_Exceptions Raise_statements and exception_handlers are not allowed. No language-defined run-time checks are generated; however, a run-time check performed automatically by the hardware is permitted. Other restrictions: No_Floating_Point Uses of predefined floating point types and operations, and declarations of new floating point types, are not allowed. No_Fixed_Point Uses of predefined fixed point types and operations, and declarations of new fixed point types, are not allowed. This paragraph was deleted. No_Access_Subprograms The declaration of access-to-subprogram types is not allowed. No_Unchecked_Access The Unchecked_Access attribute is not allowed. No_Dispatch Occurrences of T'Class are not allowed, for any (tagged) subtype T. No_IO Semantic dependence on any of the library units Sequential_IO, Direct_IO, Text_IO, Wide_Text_IO, Wide_Wide_Text_IO, or Stream_IO is not allowed. No_Delay Delay_Statements and semantic dependence on package Calendar are not allowed. No_Recursion As part of the execution of a subprogram, the same subprogram is not invoked. No_Reentrancy During the execution of a subprogram by a task, no other task invokes the same subprogram. An implementation of this Annex shall support: Implementation Requirements • • • • the restrictions defined in this subclause; and following the No_Implicit_Heap_Allocation, No_Standard_Allocators_After_Elaboration; and in D.7: No_Task_Hierarchy, No_Abort_Statement, restrictions defined the pragma Profile(Ravenscar); and the following uses of restriction_parameter_identifiers defined in D.7, which are checked prior to program execution: • Max_Task_Entries => 0, 8.3/3 9/2 10 11 12 13 14 15 16/2 17 18 19 20/2 21 22 23 23.1/2 23.2/2 23.3/3 23.4/2 23.5/2 23.6/2 743 13 December 2012 High Integrity Restrictions H.4 Ada Reference Manual — 2012 Edition • Max_Asynchronous_Select_Nesting => 0, and • Max_Tasks => 0. If an implementation supports pragma Restrictions for a particular argument, then except for the restrictions No_Unchecked_Deallocation, No_Unchecked_Conversion, No_Access_Subprograms, No_Unchecked_Access, No_Specification_of_Aspect, No_Use_of_Attribute, No_Use_of_Pragma, and the equivalent use of No_Dependence, the associated restriction applies to the run-time system. If a pragma Restrictions(No_Exceptions) is specified, the implementation shall document the effects of all constructs where language-defined checks are still performed automatically (for example, an overflow check performed by the processor). Documentation Requirements Erroneous Execution Program execution is erroneous if pragma Restrictions(No_Exceptions) has been specified and the conditions arise under which a generated language-defined run-time check would fail. Program execution is erroneous if pragma Restrictions(No_Recursion) has been specified and a subprogram is invoked as part of its own execution, or if pragma Restrictions(No_Reentrancy) has been specified and during the execution of a subprogram by a task, another task invokes the same subprogram. NOTES 10 Uses of restriction_parameter_identifier No_Dependence defined in 13.12.1: No_Dependence => Ada.Unchecked_- Deallocation and No_Dependence => Ada.Unchecked_Conversion may be appropriate for high-integrity systems. Other uses of No_Dependence can also be appropriate for high-integrity systems. 23.7/2 23.8/2 24/3 25 26 27 28/2 H.5 Pragma Detect_Blocking 1/2 The following pragma forces an implementation to detect potentially blocking operations within a protected operation. 2/2 3/2 The form of a pragma Detect_Blocking is as follows: pragma Detect_Blocking; Syntax 4/2 A pragma Detect_Blocking is a configuration pragma. Post-Compilation Rules Dynamic Semantics 5/2 An implementation is required to detect a potentially blocking operation within a protected operation, and to raise Program_Error (see 9.5.1). Implementation Permissions 6/2 7/2 An implementation is allowed to reject a compilation_unit if a potentially blocking operation is present directly within an entry_body or the body of a protected subprogram. NOTES 11 An operation that causes a task to be blocked within a foreign language domain is not defined to be potentially blocking, and need not be detected. H.4 High Integrity Restrictions 13 December 2012 744 Ada Reference Manual — 2012 Edition H.6 Pragma Partition_Elaboration_Policy This subclause defines a pragma for user control over elaboration policy. The form of a pragma Partition_Elaboration_Policy is as follows: pragma Partition_Elaboration_Policy (policy_identifier); Syntax The policy_identifier shall be either Sequential, Concurrent or an implementation-defined identifier. Post-Compilation Rules A pragma Partition_Elaboration_Policy is a configuration pragma. It specifies the elaboration policy for a partition. At most one elaboration policy shall be specified for a partition. If the Sequential policy is specified for a partition, then pragma Restrictions (No_Task_Hierarchy) shall also be specified for the partition. Dynamic Semantics Notwithstanding what this International Standard says elsewhere, this pragma allows partition elaboration rules concerning task activation and interrupt attachment to be changed. If the policy_identifier is Concurrent, or if there is no pragma Partition_Elaboration_Policy defined for the partition, then the rules defined elsewhere in this Standard apply. If the partition elaboration policy is Sequential, then task activation and interrupt attachment are performed in the following sequence of steps: • The activation of all library-level tasks and the attachment of interrupt handlers are deferred until all library units are elaborated. • The interrupt handlers are attached by the environment task. • The environment task is suspended while the library-level tasks are activated. • The environment task executes the main subprogram (if any) concurrently with these executing tasks. If several dynamic interrupt handler attachments for the same interrupt are deferred, then the most recent call of Attach_Handler or Exchange_Handler determines which handler is attached. If any deferred task activation fails, Tasking_Error is raised at the beginning of the sequence of statements of the body of the environment task prior to calling the main subprogram. If the partition elaboration policy is Sequential and the Environment task becomes permanently blocked during elaboration, then the partition is deadlocked and it is recommended that the partition be immediately terminated. Implementation Advice 1/3 2/2 3/2 4/2 5/2 6/3 7/2 8/2 9/2 10/2 11/2 12/2 13/2 14/2 15/3 If the partition elaboration policy is Sequential and any task activation fails, then an implementation may immediately terminate the active partition to mitigate the hazard posed by continuing to execute with a subset of the tasks being active. 16/3 Implementation Permissions 745 13 December 2012 Pragma Partition_Elaboration_Policy H.6 Ada Reference Manual — 2012 Edition 17/2 NOTES 12 If any deferred task activation fails, the environment task is unable to handle the Tasking_Error exception and completes immediately. By contrast, if the partition elaboration policy is Concurrent, then this exception could be handled within a library unit. H.6 Pragma Partition_Elaboration_Policy 13 December 2012 746 Ada Reference Manual — 2012 Edition Annex J (normative) Obsolescent Features This Annex contains descriptions of features of the language whose functionality is largely redundant with other features defined by this International Standard. Use of these features is not recommended in newly features can be prevented by using pragma Restrictions written programs. Use of (No_Obsolescent_Features), see 13.12.1. these 1/2 J.1 Renamings of Library Units The following library_unit_renaming_declarations exist: Static Semantics with Ada.Unchecked_Conversion; generic function Unchecked_Conversion renames Ada.Unchecked_Conversion; with Ada.Unchecked_Deallocation; generic procedure Unchecked_Deallocation renames Ada.Unchecked_Deallocation; with Ada.Sequential_IO; generic package Sequential_IO renames Ada.Sequential_IO; with Ada.Direct_IO; generic package Direct_IO renames Ada.Direct_IO; with Ada.Text_IO; package Text_IO renames Ada.Text_IO; with Ada.IO_Exceptions; package IO_Exceptions renames Ada.IO_Exceptions; with Ada.Calendar; package Calendar renames Ada.Calendar; with System.Machine_Code; package Machine_Code renames System.Machine_Code; -- If supported. The implementation shall allow the user to replace these renamings. Implementation Requirements J.2 Allowed Replacements of Characters Syntax The following replacements are allowed for the vertical line, number sign, and quotation mark characters: • A vertical line character (|) can be replaced by an exclamation mark (!) where used as a delimiter. • The number sign characters (#) of a based_literal can be replaced by colons (:) provided that the replacement is done for both occurrences. • The quotation marks (") used as string brackets at both ends of a string literal can be replaced by percent signs (%) provided that the enclosed sequence of characters contains no quotation mark, and provided that both string brackets are replaced. Any percent sign within the sequence of characters shall then be doubled and each such doubled percent sign is interpreted as a single percent sign character value. 1 2 3 4 5 6 7 8 9 10 1 2 3 4 747 13 December 2012 Obsolescent Features J 5 1 2 3 4 5 6 7 8 9 10 Ada Reference Manual — 2012 Edition These replacements do not change the meaning of the program. J.3 Reduced Accuracy Subtypes A digits_constraint may be used to define a floating point subtype with a new value for its requested decimal precision, as reflected by its Digits attribute. Similarly, a delta_constraint may be used to define an ordinary fixed point subtype with a new value for its delta, as reflected by its Delta attribute. delta_constraint ::= delta static_expression [range_constraint] Syntax The expression of a delta_constraint is expected to be of any real type. Name Resolution Rules The expression of a delta_constraint shall be static. Legality Rules For a subtype_indication with a delta_constraint, the subtype_mark shall denote an ordinary fixed point subtype. For a subtype_indication with a digits_constraint, the subtype_mark shall denote either a decimal fixed point subtype or a floating point subtype (notwithstanding the rule given in 3.5.9 that only allows a decimal fixed point subtype). Static Semantics A subtype_indication with a subtype_mark that denotes an ordinary fixed point subtype and a delta_constraint defines an ordinary fixed point subtype with a delta given by the value of the expression of the delta_constraint. If the delta_constraint includes a range_constraint, then the ordinary fixed point subtype is constrained by the range_constraint. A subtype_indication with a subtype_mark that denotes a floating point subtype and a digits_constraint defines a floating point subtype with a requested decimal precision (as reflected by its Digits attribute) given by the value of the expression of the digits_constraint. If the digits_constraint includes a range_- constraint, then the floating point subtype is constrained by the range_constraint. Dynamic Semantics A delta_constraint is compatible with an ordinary fixed point subtype if the value of the expression is no less than the delta of the subtype, and the range_constraint, if any, is compatible with the subtype. A digits_constraint is compatible with a floating point subtype if the value of the expression is no greater than the requested decimal precision of the subtype, and the range_constraint, if any, is compatible with the subtype. 11 The elaboration of a delta_constraint consists of the elaboration of the range_constraint, if any. J.2 Allowed Replacements of Characters 13 December 2012 748 Ada Reference Manual — 2012 Edition J.4 The Constrained Attribute For every private subtype S, the following attribute is defined: Static Semantics S'Constrained Yields the value False if S denotes an unconstrained nonformal private subtype with discriminants; also yields the value False if S denotes a generic formal private subtype, and the associated actual subtype is either an unconstrained subtype with discriminants or an unconstrained array subtype; yields the value True otherwise. The value of this attribute is of the predefined subtype Boolean. J.5 ASCII The following declaration exists in the declaration of package Standard: Static Semantics package ASCII is -- Control characters: NUL : constant Character := nul; SOH : constant Character := soh; STX : constant Character := stx; ETX : constant Character := etx; ENQ : constant Character := enq; EOT : constant Character := eot; ACK : constant Character := ack; BEL : constant Character := bel; HT : constant Character := ht; BS : constant Character := bs; VT : constant Character := vt; LF : constant Character := lf; CR : constant Character := cr; FF : constant Character := ff; SI : constant Character := si; SO : constant Character := so; DC1 : constant Character := dc1; DLE : constant Character := dle; DC2 : constant Character := dc2; DC3 : constant Character := dc3; DC4 : constant Character := dc4; NAK : constant Character := nak; SYN : constant Character := syn; ETB : constant Character := etb; CAN : constant Character := can; EM : constant Character := em; SUB : constant Character := sub; ESC : constant Character := esc; GS : constant Character := gs; FS : constant Character := fs; US : constant Character := us; RS : constant Character := rs; DEL : constant Character := del; -- Other characters: Exclam : constant Character:= '!'; Quotation : constant Character:= '"'; Sharp : constant Character:= '#'; Dollar : constant Character:= '$'; Percent : constant Character:= '%'; Ampersand : constant Character:= '&'; Colon : constant Character:= ':'; Semicolon : constant Character:= ';'; Query : constant Character:= '?'; At_Sign : constant Character:= '@'; L_Bracket: constant Character:= '['; Back_Slash: constant Character:= '\'; R_Bracket: constant Character:= ']'; Circumflex: constant Character:= '^'; Underline: constant Character:= '_'; Grave : constant Character:= '`'; L_Brace : constant Character:= '{'; Bar : constant Character:= '|'; R_Brace : constant Character:= '}'; Tilde : constant Character:= '~'; -- Lower case letters: LC_A: constant Character:= 'a'; ... LC_Z: constant Character:= 'z'; end ASCII; 1 2 1 2 3 4 5 6 7 8 9 749 13 December 2012 The Constrained Attribute J.4 1 2 1 2 1 2 3 4 5 6 7 8 9 10 Ada Reference Manual — 2012 Edition J.6 Numeric_Error The following declaration exists in the declaration of package Standard: Numeric_Error : exception renames Constraint_Error; Static Semantics J.7 At Clauses Syntax at_clause ::= for direct_name use at expression; Static Semantics An at_clause of the form “for x use at y;” is equivalent to an attribute_definition_clause of the form “for x'Address use y;”. J.7.1 Interrupt Entries Implementations are permitted to allow the attachment of task entries to interrupts via the address clause. Such an entry is referred to as an interrupt entry. The address of the task entry corresponds to a hardware interrupt in an implementation-defined manner. (See Ada.Interrupts.Reference in C.3.2.) The following attribute is defined: For any task entry X: Static Semantics X'Address For a task entry whose address is specified (an interrupt entry), the value refers to the corresponding hardware interrupt. For such an entry, as for any other task entry, the meaning of this value is implementation defined. The value of this attribute is of the type of the subtype System.Address. Address may be specified for single entries via an attribute_definition_clause. Dynamic Semantics As part of the initialization of a task object, the address clause for an interrupt entry is elaborated, which evaluates the expression of the address clause. A check is made that the address specified is associated with some interrupt to which a task entry may be attached. If this check fails, Program_Error is raised. Otherwise, the interrupt entry is attached to the interrupt associated with the specified address. Upon finalization of the task object, the interrupt entry, if any, is detached from the corresponding interrupt and the default treatment is restored. While an interrupt entry is attached to an interrupt, the interrupt is reserved (see C.3). An interrupt delivered to a task entry acts as a call to the entry issued by a hardware task whose priority is in the System.Interrupt_Priority range. It is implementation defined whether the call is performed as an ordinary entry call, a timed entry call, or a conditional entry call; which kind of call is performed can depend on the specific interrupt. J.6 Numeric_Error 13 December 2012 750 Ada Reference Manual — 2012 Edition It is a bounded error to evaluate E'Caller (see C.7.1) in an accept_statement for an interrupt entry. The possible effects are the same as for calling Current_Task from an entry body. Bounded (Run-Time) Errors The implementation shall document to which interrupts a task entry may be attached. Documentation Requirements The implementation shall document whether the invocation of an interrupt entry has the effect of an ordinary entry call, conditional call, or a timed call, and whether the effect varies in the presence of pending interrupts. The support for this subclause is optional. Implementation Permissions Interrupts to which the implementation allows a task entry to be attached may be designated as reserved for the entire duration of program execution; that is, not just when they have an interrupt entry attached to them. 11 12 13 14 15 Interrupt entry calls may be implemented by having the hardware execute directly the appropriate accept_statement. Alternatively, the implementation is allowed to provide an internal interrupt handler to simulate the effect of a normal task calling the entry. 16/1 The implementation is allowed to impose restrictions on the specifications and bodies of tasks that have interrupt entries. It is implementation defined whether direct calls (from the program) to interrupt entries are allowed. If a select_statement contains both a terminate_alternative and an accept_alternative for an interrupt entry, then an implementation is allowed to impose further requirements for the selection of the terminate_alternative in addition to those given in 9.3. NOTES 1 Queued interrupts correspond to ordinary entry calls. Interrupts that are lost if not immediately processed correspond to conditional entry calls. It is a consequence of the priority rules that an accept_statement executed in response to an interrupt can be executed with the active priority at which the hardware generates the interrupt, taking precedence over lower priority tasks, without a scheduling action. 17 18 19 20/1 2 Control information that is supplied upon an interrupt can be passed to an associated interrupt entry as one or more parameters of mode in. 21 Example of an interrupt entry: Examples task Interrupt_Handler is entry Done; for Done'Address use Ada.Interrupts.Reference(Ada.Interrupts.Names.Device_Done); end Interrupt_Handler; 22 23 751 13 December 2012 Interrupt Entries J.7.1 Ada Reference Manual — 2012 Edition J.8 Mod Clauses mod_clause ::= at mod static_expression; Syntax A record_representation_clause of the form: Static Semantics for r use record at mod a; ... end record; is equivalent to: for r'Alignment use a; for r use record ... end record; J.9 The Storage_Size Attribute For any task subtype T, the following attribute is defined: Static Semantics T'Storage_Size Denotes an implementation-defined value of type universal_integer representing the number of storage elements reserved for a task of the subtype T. Storage_Size may be specified for a task first subtype that is not an interface via an attribute_definition_clause. When the attribute is specified, the Storage_Size aspect is specified to be the value of the given expression. 1 2 3/3 4 5 1 2 3/3 J.10 Specific Suppression of Checks 1/2 Pragma Suppress can be used to suppress checks on specific entities. 2/2 3/2 4/2 5/2 6/2 The form of a specific Suppress pragma is as follows: pragma Suppress(identifier, [On =>] name); Syntax Legality Rules The identifier shall be the name of a check (see 11.5). The name shall statically denote some entity. For a specific Suppress pragma that is immediately within a package_specification, the name shall denote an entity (or several overloaded subprograms) declared immediately within the package_- specification. A specific Suppress pragma applies to the named check from the place of the pragma to the end of the innermost enclosing declarative region, or, if the pragma is given in a package_specification, to the end of the scope of the named entity. The pragma applies only to the named entity, or, for a subtype, on Static Semantics J.8 Mod Clauses 13 December 2012 752 Ada Reference Manual — 2012 Edition objects and values of its type. A specific Suppress pragma suppresses the named check for any entities to which it applies (see 11.5). Which checks are associated with a specific entity is not defined by this International Standard. An implementation is allowed to place restrictions on specific Suppress pragmas. NOTES 3 An implementation may support a similar On parameter on pragma Unsuppress (see 11.5). Implementation Permissions J.11 The Class Attribute of Untagged Incomplete Types Static Semantics For the first subtype S of a type T declared by an incomplete_type_declaration that is not tagged, the following attribute is defined: S'Class Denotes the first subtype of the incomplete class-wide type rooted at T. The completion of T shall declare a tagged type. Such an attribute reference shall occur in the same library unit as the incomplete_type_declaration. J.12 Pragma Interface Syntax In addition to an identifier, the reserved word interface is allowed as a pragma name, to provide compatibility with a prior edition of this International Standard. 7/2 8/2 1/2 2/2 1/2 J.13 Dependence Restriction Identifiers The following restrictions involve dependence on specific language-defined units. The more general restriction No_Dependence (see 13.12.1) should be used for this purpose. 1/2 The following restriction_identifiers exist: No_Asynchronous_Control Static Semantics Semantic dependence on the predefined package Asynchronous_Task_Control is not allowed. No_Unchecked_Conversion Semantic dependence on the predefined generic function Unchecked_Conversion is not allowed. No_Unchecked_Deallocation Semantic dependence on the predefined generic procedure Unchecked_Deallocation is not allowed. 2/2 3/2 4/2 5/2 753 13 December 2012 Specific Suppression of Checks J.10 Ada Reference Manual — 2012 Edition J.14 Character and Wide_Character Conversion Functions The following declarations exist in the declaration of package Ada.Characters.Handling: Static Semantics function Is_Character (Item : in Wide_Character) return Boolean renames Conversions.Is_Character; function Is_String (Item : in Wide_String) return Boolean renames Conversions.Is_String; function To_Character (Item : in Wide_Character; Substitute : in Character := ' ') return Character renames Conversions.To_Character; function To_String (Item : in Wide_String; Substitute : in Character := ' ') return String renames Conversions.To_String; function To_Wide_Character (Item : in Character) return Wide_Character renames Conversions.To_Wide_Character; function To_Wide_String (Item : in String) return Wide_String renames Conversions.To_Wide_String; 1/2 2/2 3/2 4/2 5/2 6/2 J.15 Aspect-related Pragmas 1/3 Pragmas can be used as an alternative to aspect_specifications to specify certain aspects. J.15.1 Pragma Inline 1/3 2/3 The form of a pragma Inline, which is a program unit pragma (see 10.1.5), is as follows: pragma Inline (name{, name}); Syntax 3/3 The pragma shall apply to one or more callable entities or generic subprograms. Legality Rules 4/3 Pragma Inline specifies that the Inline aspect (see 6.3.2) for each entity denoted by each name given in the pragma has the value True. Static Semantics Implementation Permissions 5/3 6/3 An implementation may allow a pragma Inline that has an argument which is a direct_name denoting a subprogram_body of the same declarative_part. NOTES 4 The name in a pragma Inline may denote more than one entity in the case of overloading. Such a pragma applies to all of the denoted entities. J.14 Character and Wide_Character Conversion Functions 13 December 2012 754 Ada Reference Manual — 2012 Edition J.15.2 Pragma No_Return The form of a pragma No_Return, which is a representation pragma (see 13.1), is as follows: pragma No_Return (procedure_local_name{, procedure_local_name}); Syntax Each procedure_local_name shall denote one or more procedures or generic procedures. The procedure_local_name shall not denote a null procedure nor an instance of a generic unit. Legality Rules 1/3 2/3 3/3 Pragma No_Return specifies that the No_Return aspect (see 6.5.1) for each procedure denoted by each local_name given in the pragma has the value True. 4/3 Static Semantics J.15.3 Pragma Pack The form of a pragma Pack, which is a representation pragma (see 13.1), is as follows: pragma Pack (first_subtype_local_name); Syntax The first_subtype_local_name of a pragma Pack shall denote a composite subtype. Legality Rules Pragma Pack specifies that the Pack aspect (see 13.2) for the type denoted by first_subtype_local_name has the value True. Static Semantics J.15.4 Pragma Storage_Size Syntax The form of a pragma Storage_Size is as follows: pragma Storage_Size (expression); A pragma Storage_Size is allowed only immediately within a task_definition. The expression of a pragma Storage_Size is expected to be of any integer type. Name Resolution Rules The pragma Storage_Size sets the Storage_Size aspect (see 13.3) of the type defined by the immediately enclosing task_definition to the value of the expression of the pragma. Static Semantics 1/3 2/3 3/3 4/3 1/3 2/3 3/3 4/3 5/3 755 13 December 2012 Pragma No_Return J.15.2 Ada Reference Manual — 2012 Edition J.15.5 Interfacing Pragmas 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 10/3 11/3 12/3 13/3 14/3 15/3 Syntax An interfacing pragma is a representation pragma that is one of the pragmas Import, Export, or Convention. Their forms are as follows: pragma Import( [Convention =>] convention_identifier, [Entity =>] local_name [, [External_Name =>] external_name_string_expression] [, [Link_Name =>] link_name_string_expression]); pragma Export( [Convention =>] convention_identifier, [Entity =>] local_name [, [External_Name =>] external_name_string_expression] [, [Link_Name =>] link_name_string_expression]); pragma Convention([Convention =>] convention_identifier,[Entity =>] local_name); For pragmas Import and Export, the argument for Link_Name shall not be given without the pragma_argument_identifier unless the argument for External_Name is given. The expected type for an external_name_string_expression and a link_name_string_expression in an interfacing pragma is String. Name Resolution Rules Legality Rules The convention_identifier of an interfacing pragma shall be the name of a convention (see B.1). A pragma Import shall be the completion of a declaration. Notwithstanding any rule to the contrary, a pragma Import may serve as the completion of any kind of (explicit) declaration if supported by an implementation for that kind of declaration. If a completion is a pragma Import, then it shall appear in the same declarative_part, package_specification, task_definition, or protected_definition as the declaration. For a library unit, it shall appear in the same compilation, before any subsequent compilation_units other than pragmas. If the local_name denotes more than one entity, then the pragma Import is the completion of all of them. The external_name_string_expression and link_name_string_expression of a pragma Import or Export shall be static. The local_name of each of these pragmas shall denote a declaration that may have the similarly named aspect specified. Static Semantics An interfacing pragma specifies various aspects of the entity denoted by the local_name as follows: • The Convention aspect (see B.1) is convention_identifier. • A pragma Import specifies that the Import aspect (see B.1) is True. • A pragma Export specifies that the Export aspect (see B.1) is True. • For both pragma Import and Export, if an external name is given in the pragma, the External_Name aspect (see B.1) is specified to be external_name_string_expression. If a link name is given in the pragma, the Link_Name aspect (see B.1) is specified to be the link_name_string_expression. J.15.5 Interfacing Pragmas 13 December 2012 756 Ada Reference Manual — 2012 Edition J.15.6 Pragma Unchecked_Union Syntax The form of a pragma Unchecked_Union, which is a representation pragma (see 13.1), is as follows: pragma Unchecked_Union (first_subtype_local_name); first_subtype_local_name of a pragma Unchecked_Union shall denote an unconstrained The discriminated record subtype having a variant_part. Legality Rules 1/3 2/3 3/3 A pragma Unchecked_Union specifies that the Unchecked_Union aspect (see B.3.3) for the type denoted by first_subtype_local_name has the value True. 4/3 Static Semantics J.15.7 Pragmas Interrupt_Handler and Attach_Handler Syntax The form of a pragma Interrupt_Handler is as follows: pragma Interrupt_Handler (handler_name); The form of a pragma Attach_Handler is as follows: pragma Attach_Handler (handler_name, expression); Name Resolution Rules For the Interrupt_Handler and Attach_Handler pragmas, the handler_name shall resolve to denote a protected procedure with a parameterless profile. 1/3 2/3 3/3 4/3 5/3 For the Attach_Handler pragma, the expected type for the expression is Interrupts.Interrupt_Id (see C.3.2). 6/3 Legality Rules 7/3 8/3 The Attach_Handler and Interrupt_Handler pragmas are only allowed immediately within the protected_definition where is declared. The corresponding protected_type_declaration or single_protected_declaration shall be a library-level declaration, and shall not be declared within a generic body. In addition to the places where Legality Rules normally apply (see 12.3), these rules also apply in the private part of an instance of a generic unit. the corresponding subprogram Static Semantics For an implementation that supports Annex C, a pragma Interrupt_Handler specifies the Interrupt_Handler aspect (see C.3.1) for the protected procedure handler_name to have the value True. For an implementation that supports Annex C, a pragma Attach_Handler specifies the Attach_Handler aspect (see C.3.1) for the protected procedure handler_name to have the value of the given expression as evaluated at object creation time. 757 13 December 2012 Pragma Unchecked_Union J.15.6 Ada Reference Manual — 2012 Edition J.15.8 Shared Variable Pragmas The form for pragmas Atomic, Volatile, Independent, Atomic_Components, and Volatile_Components, and Independent_Components is as follows: pragma Atomic (local_name); Syntax pragma Volatile (local_name); pragma Independent (component_local_name); pragma Atomic_Components (array_local_name); pragma Volatile_Components (array_local_name); pragma Independent_Components (local_name); Name Resolution Rules The local_name in an Atomic or Volatile pragma shall resolve to denote either an object_declaration, a noninherited component_declaration, or a full_type_declaration. The component_local_name in an to denote a noninherited component_declaration. The Independent pragma array_local_name in an Atomic_Components or Volatile_Components pragma shall resolve to denote the declaration of an array type or an array object of an anonymous type. The local_name in an Independent_Components pragma shall resolve to denote the declaration of an array or record type or an array object of an anonymous type. resolve shall 1/3 2/3 3/3 4/3 5/3 6/3 7/3 8/3 9/3 These pragmas are representation pragmas (see 13.1). Each of these pragmas specifies that the similarly named aspect (see C.6) of the type, object, or component denoted by its argument is True. Static Semantics 10/3 The local_name of each of these pragmas shall denote a declaration that may have the similarly named aspect specified. Legality Rules J.15.9 Pragma CPU 1/3 2/3 The form of a pragma CPU is as follows: pragma CPU (expression); Syntax 3/3 The expected type for the expression of a pragma CPU is System.Multiprocessors.CPU_Range. Name Resolution Rules 4/3 5/3 A CPU pragma is allowed only immediately within a task_definition, or the declarative_part of a subprogram_body. For a CPU pragma that appears in the declarative_part of a subprogram_body, the expression shall be static. Legality Rules J.15.8 Shared Variable Pragmas 13 December 2012 758 Ada Reference Manual — 2012 Edition Static Semantics For an implementation that supports Annex D, a pragma CPU specifies the value of the CPU aspect (see D.16). If the pragma appears in a task_definition, the expression is associated with the aspect for the task type or single_task_declaration that contains the pragma; otherwise, the expression is associated with the aspect for the subprogram that contains the pragma. 6/3 J.15.10 Pragma Dispatching_Domain The form of a pragma Dispatching_Domain is as follows: pragma Dispatching_Domain (expression); Syntax Name Resolution Rules The the System.Multiprocessors.Dispatching_Domains.Dispatching_Domain. expected type for 1/3 2/3 expression is 3/3 A Dispatching_Domain pragma is allowed only immediately within a task_definition. Legality Rules For an implementation that supports Annex D, a pragma Dispatching_Domain specifies the value of the Dispatching_Domain aspect (see D.16.1). The expression is associated with the aspect for the task type or single_task_declaration that contains the pragma. Static Semantics J.15.11 Pragmas Priority and Interrupt_Priority Syntax The form of a pragma Priority is as follows: pragma Priority (expression); The form of a pragma Interrupt_Priority is as follows: pragma Interrupt_Priority [(expression);] The expected type for the expression in a Priority or Interrupt_Priority pragma is Integer. Name Resolution Rules Legality Rules A Priority pragma is allowed only immediately within a task_definition, a protected_definition, or the declarative_part of a subprogram_body. An Interrupt_Priority pragma is allowed only immediately within a task_definition or a protected_definition. For a Priority pragma that appears in the declarative_part of a subprogram_body, the expression shall be static, and its value shall be in the range of System.Priority. 4/3 5/3 1/3 2/3 3/3 4/3 5/3 6/3 7/3 For an implementation that supports Annex D, a pragma Priority specifies the value of the Priority aspect (see D.1) and a pragma Interrupt_Priority specifies the value of the Interrupt_Priority aspect as follows: 8/3 Static Semantics 759 13 December 2012 Pragma CPU J.15.9 Ada Reference Manual — 2012 Edition 9/3 • If the pragma appears in a task_definition, the expression is associated with the aspect for the task type or single_task_declaration that contains the pragma; 10/3 • If the pragma appears in a protected_definition, the expression is associated with the aspect for the protected type or single_protected_declaration that contains the pragma; 11/3 • If the pragma appears in the declarative_part of a subprogram_body, the expression is associated with the aspect for the subprogram that contains the pragma. 12/3 If there is no expression in an Interrupt_Priority pragma, the Interrupt_Priority aspect has the value Interrupt_Priority'Last. J.15.12 Pragma Relative_Deadline 1/3 2/3 The form of a pragma Relative_Deadline is as follows: pragma Relative_Deadline (relative_deadline_expression); Syntax 3/3 The expected type for a relative_deadline_expression is Real_Time.Time_Span. Name Resolution Rules 4/3 A Relative_Deadline pragma is allowed only immediately within a task_definition or the declarative_part of a subprogram_body. Legality Rules 5/3 For an implementation that supports Annex D, a pragma Relative_Deadline specifies the value of the Relative_Deadline aspect (see D.2.6). If the pragma appears in a task_definition, the expression is associated with the aspect for the task type or single_task_declaration that contains the pragma; otherwise, the expression is associated with the aspect for the subprogram that contains the pragma. Static Semantics J.15.13 Pragma Asynchronous 1/3 2/3 3/3 Syntax The form of a pragma Asynchronous, which is a representation pragma (see 13.1), is as follows: pragma Asynchronous (local_name); For an implementation that supports Annex E, a pragma Asynchronous specifies that the Asynchronous aspect (see E.4.1) for the procedure or type denoted by local_name has the value True. Static Semantics 4/3 The local_name of a pragma Asynchronous shall denote a declaration that may have aspect Asynchronous specified. Legality Rules J.15.11 Pragmas Priority and Interrupt_Priority 13 December 2012 760 Ada Reference Manual — 2012 Edition Annex K (informative) Language-Defined Aspects and Attributes This annex summarizes the definitions given elsewhere of the language-defined aspects and attributes. Some aspects have corresponding attributes, as noted. 1/3 K.1 Language-Defined Aspects This subclause summarizes the definitions given elsewhere of the language-defined aspects. Aspects are properties of entities that can be specified by the Ada program; unless otherwise specified below, aspects can be specified using an aspect_specification. Address Machine address of an entity. See 13.3. Alignment (object) Alignment of an object. See 13.3. Alignment (subtype) Alignment of a subtype. See 13.3. All_Calls_Remote 1/3 2/3 3/3 4/3 5/3 All remote procedure calls should use the Partition Communication Subsystem, even if they are local. See E.2.3. Asynchronous Remote procedure calls are asynchronous; the caller continues without waiting for the call 6/3 to return. See E.4.1. Atomic Declare that a type, object, or component is atomic. See C.6. Atomic_Components Declare that the components of an array type or object are atomic. See C.6. Attach_Handler Protected procedure is attached to an interrupt. See C.3.1. Bit_Order Order of bit numbering in a record_representation_clause. See 13.5.3. Coding Internal enumeration_representation_clause, not by an aspect_specification. See 13.4. representation enumeration Specified literals. of by an Component_Size Size in bits of a component of an array type. See 13.3. Constant_Indexing Defines function(s) to implement user-defined indexed_components. See 4.1.6. Convention Calling convention or other convention used for interfacing to other languages. See B.1. CPU Processor on which a given task should run. See D.16. Default_Component_Value Default value for the components of an array-of-scalar subtype. See 3.6. Default_Iterator Default iterator to be used in for loops. See 5.5.1. Default_Storage_Pool Default storage pool for a generic instance. See 13.11.3. 761 13 December 2012 Language-Defined Aspects and Attributes Annex K 7/3 8/3 9/3 10/3 11/3 12/3 13/3 14/3 15/3 16/3 17/3 18/3 Ada Reference Manual — 2012 Edition 19/3 Default_Value Default value for a scalar subtype. See 3.5. 20/3 Dispatching_Domain Domain (group of processors) on which a given task should run. See D.16.1. 21/3 Dynamic_Predicate Condition that must hold true for objects of a given subtype; the subtype is not static. See 3.2.4. 22/3 Elaborate_Body A given package must have a body, and that body is elaborated immediately after the declaration. See 10.2.1. 23/3 24/3 25/3 26/3 27/3 28/3 29/3 Export Entity is exported to another language. See B.1. External_Name Name used to identify an imported or exported entity. See B.1. External_Tag Unique identifier for a tagged type in streams. See 13.3. Implicit_Dereference Mechanism for user-defined implicit .all. See 4.1.5. Import Entity is imported from another language. See B.1. Independent Declare that a type, object, or component is independently addressable. See C.6. Independent_Components Declare that the components of an array or record type, or an array object, are independently addressable. See C.6. 30/3 31/3 Inline Input For efficiency, Inline calls are requested for a subprogram. See 6.3.2. Function to read a value from a stream for a given type, including any bounds and discriminants. See 13.13.2. 32/3 Interrupt_Handler Protected procedure may be attached to interrupts. See C.3.1. 33/3 Interrupt_Priority Priority of a task object or type, or priority of a protected object or type; the priority is in the interrupt range. See D.1. 34/3 Iterator_Element Element type to be used for user-defined iterators. See 5.5.1. 35/3 Layout (record) Layout of record components. Specified by a record_representation_clause, not by an aspect_specification. See 13.5.1. 36/3 37/3 38/3 39/3 40/3 41/3 Link_Name Linker symbol used to identify an imported or exported entity. See B.1. Machine_Radix Radix (2 or 10) that is used to represent a decimal fixed point type. See F.1. No_Return A procedure will not return normally. See 6.5.1. Output Pack Post Procedure to write a value to a stream for a given type, including any bounds and discriminants. See 13.13.2. Minimize storage when laying out records and arrays. See 13.2. Postcondition; a condition that must hold true after a call. See 6.1.1. K.1 Language-Defined Aspects 13 December 2012 762 Ada Reference Manual — 2012 Edition Post'Class Postcondition inherited on type derivation. See 6.1.1. Pre Precondition; a condition that must hold true before a call. See 6.1.1. Pre'Class Precondition inherited on type derivation. See 6.1.1. Preelaborate Code execution during elaboration is avoided for a given package. See 10.2.1. Priority Pure Read Priority of a task object or type, or priority of a protected object or type; the priority is not in the interrupt range. See D.1. Side effects are avoided in the subprograms of a given package. See 10.2.1. Procedure to read a value from a stream for a given type. See 13.13.2. Record layout See Layout. See 13.5.1. Relative_Deadline Task parameter used in Earliest Deadline First Dispatching. See D.2.6. Remote_Call_Interface Subprograms in a given package may be used in remote procedure calls. See E.2.3. Remote_Types Types in a given package may be used in remote procedure calls. See E.2.2. Shared_Passive A given package is used to represent shared memory in a distributed system. See E.2.1. Size (object) Size in bits of an object. See 13.3. Size (subtype) Size in bits of a subtype. See 13.3. Small Scale factor for a fixed point type. See 3.5.10. Static_Predicate Condition that must hold true for objects of a given subtype; the subtype may be static. See 3.2.4. Storage_Pool Pool of memory from which new will allocate for a given access type. See 13.11. Storage_Size (access) Sets memory size for allocations for an access type. See 13.11. Storage_Size (task) Size in storage elements reserved for a task type or single task object. See 13.3. Stream_Size Size in bits used to represent elementary objects in a stream. See 13.13.2. Synchronization Defines whether a given primitive operation of a synchronized interface must be implemented by an entry or protected procedure. See 9.5. Type_Invariant A condition that must hold true for all objects of a type. See 7.3.2. Type_Invariant'Class A condition that must hold true for all objects in a class of types. See 7.3.2. Unchecked_Union Type is used to interface to a C union type. See B.3.3. Variable_Indexing Defines function(s) to implement user-defined indexed_components. See 4.1.6. Volatile Declare that a type, object, or component is volatile. See C.6. 763 13 December 2012 Language-Defined Aspects K.1 42/3 43/3 44/3 45/3 46/3 47/3 48/3 49/3 50/3 51/3 52/3 53/3 54/3 55/3 56/3 57/3 58/3 59/3 60/3 61/3 62/3 63/3 64/3 65/3 66/3 67/3 Ada Reference Manual — 2012 Edition 68/3 Volatile_Components Declare that the components of an array type or object are volatile. See C.6. 69/3 Write Procedure to write a value to a stream for a given type. See 13.13.2. K.2 Language-Defined Attributes 1/3 This subclause summarizes the definitions given elsewhere of the language-defined attributes. Attributes are properties of entities that can be queried by an Ada program. 2 3 4 5 6/1 7 8 9 10 11 12 13 P'Access For a prefix P that denotes a subprogram: P'Access yields an access value that designates the subprogram denoted by P. The type of P'Access is an access-to-subprogram type (S), as determined by the expected type. See 3.10.2. X'Access For a prefix X that denotes an aliased view of an object: X'Access yields an access value that designates the object denoted by X. The type of X'Access is an access-to-object type, as determined by the expected type. The expected type shall be a general access type. See 3.10.2. X'Address For a prefix X that denotes an object, program unit, or label: Denotes the address of the first of the storage elements allocated to X. For a program unit or label, this value refers to the machine code associated with the corresponding body or statement. The value of this attribute is of type System.Address. See 13.3. S'Adjacent For every subtype S of a floating point type T: S'Adjacent denotes a function with the following specification: function S'Adjacent (X, Towards : T) return T If Towards = X, the function yields X; otherwise, it yields the machine number of the type T adjacent to X in the direction of Towards, if that machine number exists. If the result would be outside the base range of S, Constraint_Error is raised. When T'Signed_Zeros is True, a zero result has the sign of X. When Towards is zero, its sign has no bearing on the result. See A.5.3. S'Aft For every fixed point subtype S: S'Aft yields the number of decimal digits needed after the decimal point to accommodate the delta of the subtype S, unless the delta of the subtype S is greater than 0.1, in which case the attribute yields the value one. (S'Aft is the smallest positive integer N for which (10**N)*S'Delta is greater than or equal to one.) The value of this attribute is of the type universal_integer. See 3.5.10. 13.1/2 S'Alignment For every subtype S: 13.2/2 13.3/2 The value of this attribute is of type universal_integer, and nonnegative. For an object X of subtype S, if S'Alignment is not zero, then X'Alignment is a nonzero integral multiple of S'Alignment unless specified otherwise by a representation item. See 13.3. 14/1 X'Alignment For a prefix X that denotes an object: 15 The value of this attribute is of type universal_integer, and nonnegative; zero means that the object is not necessarily aligned on a storage element boundary. If X'Alignment is not K.1 Language-Defined Aspects 13 December 2012 764 Ada Reference Manual — 2012 Edition zero, then X is aligned on a storage unit boundary and X'Address is an integral multiple of X'Alignment (that is, the Address modulo the Alignment is zero). See 13.3. S'Base For every scalar subtype S: S'Base denotes an unconstrained subtype of the type of S. This unconstrained subtype is called the base subtype of the type. See 3.5. S'Bit_Order For every specific record subtype S: Denotes the bit ordering for the type of S. The value of this attribute is of type System.Bit_Order. See 13.5.3. P'Body_Version For a prefix P that statically denotes a program unit: Yields a value of the predefined type String that identifies the version of the compilation unit that contains the body (but not any subunits) of the program unit. See E.3. T'Callable For a prefix T that is of a task type (after any implicit dereference): Yields the value True when the task denoted by T is callable, and False otherwise; See 9.9. E'Caller For a prefix E that denotes an entry_declaration: Yields a value of the type Task_Id that identifies the task whose call is now being serviced. Use of this attribute is allowed only inside an accept_statement, or entry_body after the entry_barrier, corresponding to the entry_declaration denoted by E. See C.7.1. S'Ceiling For every subtype S of a floating point type T: S'Ceiling denotes a function with the following specification: function S'Ceiling (X : T) return T The function yields the value X, i.e., the smallest (most negative) integral value greater than or equal to X. When X is zero, the result has the sign of X; a zero result otherwise has a negative sign when S'Signed_Zeros is True. See A.5.3. S'Class For every subtype S of a tagged type T (specific or class-wide): S'Class denotes a subtype of the class-wide type (called T'Class in this International Standard) for the class rooted at T (or if S already denotes a class-wide subtype, then S'Class is the same as S). S'Class is unconstrained. However, if S is constrained, then the values of S'Class are only those that when converted to the type T belong to S. See 3.9. S'Class For every subtype S of an untagged private type whose full view is tagged: Denotes the class-wide subtype corresponding to the full view of S. This attribute is allowed only from the beginning of the private part in which the full view is declared, until the declaration of the full view. After the full view, the Class attribute of the full view can be used. See 7.3.1. X'Component_Size For a prefix X that denotes an array subtype or array object (after any implicit dereference): Denotes the size in bits of components of the type of X. The value of this attribute is of type universal_integer. See 13.3. S'Compose For every subtype S of a floating point type T: 16/2 17 18 19 20 21/1 22 23 24 25 26/3 27 28 29 30 31 32 33 34 35 36/1 37 38 765 13 December 2012 Language-Defined Attributes K.2 Ada Reference Manual — 2012 Edition 39 40 41 42 A'Constrained S'Compose denotes a function with the following specification: function S'Compose (Fraction : T; Exponent : universal_integer) return T Let v be the value Fraction · T'Machine_RadixExponent–k, where k is the normalized exponent of Fraction. If v is a machine number of the type T, or if |v| ≥ T'Model_Small, the function yields v; otherwise, it yields either one of the machine numbers of the type T adjacent to v. Constraint_Error is optionally raised if v is outside the base range of S. A zero result has the sign of Fraction when S'Signed_Zeros is True. See A.5.3. For a prefix A that is of a discriminated type (after any implicit dereference): Yields the value True if A denotes a constant, a value, a tagged object, or a constrained variable, and False otherwise. See 3.7.2. S'Copy_Sign For every subtype S of a floating point type T: S'Copy_Sign denotes a function with the following specification: function S'Copy_Sign (Value, Sign : T) return T If the value of Value is nonzero, the function yields a result whose magnitude is that of Value and whose sign is that of Sign; otherwise, it yields the value zero. Constraint_Error is optionally raised if the result is outside the base range of S. A zero result has the sign of Sign when S'Signed_Zeros is True. See A.5.3. E'Count For a prefix E that denotes an entry of a task or protected unit: Yields the number of calls presently queued on the entry E of the current instance of the unit. The value of this attribute is of the type universal_integer. See 9.9. S'Definite For a prefix S that denotes a formal indefinite subtype: S'Definite yields True if the actual subtype corresponding to S is definite; otherwise, it yields False. The value of this attribute is of the predefined type Boolean. See 12.5.1. S'Delta For every fixed point subtype S: S'Delta denotes the delta of the fixed point subtype S. The value of this attribute is of the type universal_real. See 3.5.10. S'Denorm For every subtype S of a floating point type T: Yields the value True if every value expressible in the form ± mantissa · T'Machine_RadixT'Machine_Emin where mantissa is a nonzero T'Machine_Mantissa-digit fraction in the number base T'Machine_Radix, the first digit of which is zero, is a machine number (see 3.5.7) of the type T; yields the value False otherwise. The value of this attribute is of the predefined type Boolean. See A.5.3. S'Digits For every floating point subtype S: S'Digits denotes the requested decimal precision for the subtype S. The value of this attribute is of the type universal_integer. See 3.5.8. S'Digits For every decimal fixed point subtype S: S'Digits denotes the digits of the decimal fixed point subtype S, which corresponds to the number of decimal digits that are representable in objects of the subtype. The value of this attribute is of the type universal_integer. See 3.5.10. K.2 Language-Defined Attributes 13 December 2012 766 43/3 44 45 46 47 48 49 50/1 51/3 52 53 54 55 56 57 58 59 Ada Reference Manual — 2012 Edition S'Exponent For every subtype S of a floating point type T: S'Exponent denotes a function with the following specification: function S'Exponent (X : T) return universal_integer The function yields the normalized exponent of X. See A.5.3. S'External_Tag For every subtype S of a tagged type T (specific or class-wide): S'External_Tag denotes an external string representation for S'Tag; it is of the predefined type String. External_Tag may be specified for a specific tagged type via an attribute_definition_clause; the expression of such a clause shall be static. The default external tag representation is implementation defined. See 13.13.2. See 13.3. 60 61 62 63 64 65 A'First For a prefix A that is of an array type (after any implicit dereference), or denotes a constrained array subtype: 66/1 A'First denotes the lower bound of the first index range; its type is the corresponding index type. See 3.6.2. S'First For every scalar subtype S: S'First denotes the lower bound of the range of S. The value of this attribute is of the type of S. See 3.5. 67 68 69 A'First(N) For a prefix A that is of an array type (after any implicit dereference), or denotes a constrained array subtype: 70/1 A'First(N) denotes the lower bound of the N-th index range; its type is the corresponding index type. See 3.6.2. R.C'First_Bit For a component C of a composite, non-array object R: If the nondefault bit ordering applies to the composite type, and if a component_clause specifies the placement of C, denotes the value given for the first_bit of the component_clause; otherwise, denotes the offset, from the start of the first of the storage elements occupied by C, of the first bit occupied by C. This offset is measured in bits. The first bit of a storage element is numbered zero. The value of this attribute is of the type universal_integer. See 13.5.2. S'First_Valid 71 72 73/2 73.1/3 For every static discrete subtype S for which there exists at least one value belonging to S that satisfies any predicate of S: S'First_Valid denotes the smallest value that belongs to S and satisfies the predicate of S. The value of this attribute is of the type of S. See 3.5.5. 73.2/3 S'Floor For every subtype S of a floating point type T: S'Floor denotes a function with the following specification: function S'Floor (X : T) return T The function yields the value X, i.e., the largest (most positive) integral value less than or equal to X. When X is zero, the result has the sign of X; a zero result otherwise has a positive sign. See A.5.3. S'Fore For every fixed point subtype S: 74 75 76 77 78 767 13 December 2012 Language-Defined Attributes K.2 Ada Reference Manual — 2012 Edition 79 80 81 82 83 S'Fore yields the minimum number of characters needed before the decimal point for the decimal representation of any value of the subtype S, assuming that the representation does not include an exponent, but includes a one-character prefix that is either a minus sign or a space. (This minimum number does not include superfluous zeros or underlines, and is at least 2.) The value of this attribute is of the type universal_integer. See 3.5.10. S'Fraction For every subtype S of a floating point type T: S'Fraction denotes a function with the following specification: function S'Fraction (X : T) return T The function yields the value X · T'Machine_Radix–k, where k is the normalized exponent of X. A zero result, which can only occur when X is zero, has the sign of X. See A.5.3. 83.1/3 X'Has_Same_Storage For a prefix X that denotes an object: 83.2/3 83.3/3 83.4/3 X'Has_Same_Storage denotes a function with the following specification: function X'Has_Same_Storage (Arg : any_type) return Boolean The actual parameter shall be a name that denotes an object. The object denoted by the actual parameter can be of any type. This function evaluates the names of the objects involved and returns True if the representation of the object denoted by the actual parameter occupies exactly the same bits as the representation of the object denoted by X; otherwise, it returns False. See 13.3. 84/1 E'Identity For a prefix E that denotes an exception: 85 86 87 88 89 90 E'Identity returns the unique identity of the exception. The type of this attribute is Exception_Id. See 11.4.1. T'Identity For a prefix T that is of a task type (after any implicit dereference): Yields a value of the type Task_Id that identifies the task denoted by T. See C.7.1. S'Image For every scalar subtype S: S'Image denotes a function with the following specification: function S'Image(Arg : S'Base) return String 91/3 The function returns an image of the value of Arg as a String. See 3.5. 92 S'Class'Input For every subtype S'Class of a class-wide type T'Class: S'Class'Input denotes a function with the following specification: function S'Class'Input( Stream : not null access Ada.Streams.Root_Stream_Type'Class) return T'Class First reads the external tag from Stream and determines the corresponding internal tag (by calling Tags.Descendant_Tag(String'Input(Stream), S'Tag) which might raise Tag_Error — see 3.9) and then dispatches to the subprogram denoted by the Input attribute of the specific type identified by the internal tag; returns that result. If the specific type identified by the internal tag is abstract, Constraint_Error is raised. See 13.13.2. S'Input For every subtype S of a specific type T: S'Input denotes a function with the following specification: 93 94/2 95/3 96 97 K.2 Language-Defined Attributes 13 December 2012 768 Ada Reference Manual — 2012 Edition function S'Input( Stream : not null access Ada.Streams.Root_Stream_Type'Class) return T 98/2 S'Input reads and returns one value from Stream, using any bounds or discriminants written by a corresponding S'Output to determine how much to read. See 13.13.2. 99 A'Last For a prefix A that is of an array type (after any implicit dereference), or denotes a constrained array subtype: 100/1 A'Last denotes the upper bound of the first index range; its type is the corresponding index type. See 3.6.2. S'Last For every scalar subtype S: S'Last denotes the upper bound of the range of S. The value of this attribute is of the type of S. See 3.5. 101 102 103 A'Last(N) For a prefix A that is of an array type (after any implicit dereference), or denotes a constrained array subtype: 104/1 A'Last(N) denotes the upper bound of the N-th index range; its type is the corresponding index type. See 3.6.2. R.C'Last_Bit For a component C of a composite, non-array object R: If the nondefault bit ordering applies to the composite type, and if a component_clause specifies the placement of C, denotes the value given for the last_bit of the component_clause; otherwise, denotes the offset, from the start of the first of the storage elements occupied by C, of the last bit occupied by C. This offset is measured in bits. The value of this attribute is of the type universal_integer. See 13.5.2. S'Last_Valid 105 106 107/2 107.1/3 For every static discrete subtype S for which there exists at least one value belonging to S that satisfies any predicate of S: S'Last_Valid denotes the largest value that belongs to S and satisfies the predicate of S. The value of this attribute is of the type of S. See 3.5.5. 107.2/3 S'Leading_Part For every subtype S of a floating point type T: S'Leading_Part denotes a function with the following specification: function S'Leading_Part (X : T; Radix_Digits : universal_integer) return T Let v be the value T'Machine_Radixk–Radix_Digits, where k is the normalized exponent of X. The function yields the value • X/v · v, when X is nonnegative and Radix_Digits is positive; • X/v · v, when X is negative and Radix_Digits is positive. Constraint_Error is raised when Radix_Digits is zero or negative. A zero result, which can only occur when X is zero, has the sign of X. See A.5.3. 108 109 110 111 112 113 114 A'Length For a prefix A that is of an array type (after any implicit dereference), or denotes a constrained array subtype: 115/1 A'Length denotes the number of values of the first index range (zero for a null range); its type is universal_integer. See 3.6.2. 116 769 13 December 2012 Language-Defined Attributes K.2 Ada Reference Manual — 2012 Edition 117/1 A'Length(N) For a prefix A that is of an array type (after any implicit dereference), or denotes a constrained array subtype: 118 119 120 121 122 A'Length(N) denotes the number of values of the N-th index range (zero for a null range); its type is universal_integer. See 3.6.2. S'Machine For every subtype S of a floating point type T: S'Machine denotes a function with the following specification: function S'Machine (X : T) return T If X is a machine number of the type T, the function yields X; otherwise, it yields the value obtained by rounding or truncating X to either one of the adjacent machine numbers of the type T. Constraint_Error is raised if rounding or truncating X to the precision of the machine numbers results in a value outside the base range of S. A zero result has the sign of X when S'Signed_Zeros is True. See A.5.3. 123 S'Machine_Emax For every subtype S of a floating point type T: 124 Yields the largest (most positive) value of exponent such that every value expressible in the canonical form (for the type T), having a mantissa of T'Machine_Mantissa digits, is a machine number (see 3.5.7) of the type T. This attribute yields a value of the type universal_integer. See A.5.3. 125 S'Machine_Emin For every subtype S of a floating point type T: 126 Yields the smallest (most negative) value of exponent such that every value expressible in the canonical form (for the type T), having a mantissa of T'Machine_Mantissa digits, is a machine number (see 3.5.7) of the type T. This attribute yields a value of the type universal_integer. See A.5.3. 127 S'Machine_Mantissa For every subtype S of a floating point type T: 128 Yields the largest value of p such that every value expressible in the canonical form (for the type T), having a p-digit mantissa and an exponent between T'Machine_Emin and T'Machine_Emax, is a machine number (see 3.5.7) of the type T. This attribute yields a value of the type universal_integer. See A.5.3. 129 S'Machine_Overflows For every subtype S of a floating point type T: 130 Yields the value True if overflow and divide-by-zero are detected and reported by raising Constraint_Error for every predefined operation that yields a result of the type T; yields the value False otherwise. The value of this attribute is of the predefined type Boolean. See A.5.3. 131 S'Machine_Overflows For every subtype S of a fixed point type T: 132 Yields the value True if overflow and divide-by-zero are detected and reported by raising Constraint_Error for every predefined operation that yields a result of the type T; yields the value False otherwise. The value of this attribute is of the predefined type Boolean. See A.5.4. 133 S'Machine_Radix For every subtype S of a floating point type T: K.2 Language-Defined Attributes 13 December 2012 770 Ada Reference Manual — 2012 Edition Yields the radix of the hardware representation of the type T. The value of this attribute is of the type universal_integer. See A.5.3. S'Machine_Radix For every subtype S of a fixed point type T: Yields the radix of the hardware representation of the type T. The value of this attribute is of the type universal_integer. See A.5.4. S'Machine_Rounding For every subtype S of a floating point type T: S'Machine_Rounding denotes a function with the following specification: function S'Machine_Rounding (X : T) return T The function yields the integral value nearest to X. If X lies exactly halfway between two integers, one of those integers is returned, but which of them is returned is unspecified. A zero result has the sign of X when S'Signed_Zeros is True. This function provides access to the rounding behavior which is most efficient on the target processor. See A.5.3. S'Machine_Rounds For every subtype S of a floating point type T: Yields the value True if rounding is performed on inexact results of every predefined operation that yields a result of the type T; yields the value False otherwise. The value of this attribute is of the predefined type Boolean. See A.5.3. S'Machine_Rounds For every subtype S of a fixed point type T: Yields the value True if rounding is performed on inexact results of every predefined operation that yields a result of the type T; yields the value False otherwise. The value of this attribute is of the predefined type Boolean. See A.5.4. S'Max For every scalar subtype S: S'Max denotes a function with the following specification: function S'Max(Left, Right : S'Base) return S'Base The function returns the greater of the values of the two parameters. See 3.5. S'Max_Alignment_For_Allocation For every subtype S: Denotes the maximum value for Alignment that could be requested by the implementation via Allocate for an access type whose designated subtype is S. The value of this attribute is of type universal_integer. See 13.11.1. S'Max_Size_In_Storage_Elements For every subtype S: Denotes the maximum value for Size_In_Storage_Elements that could be requested by the implementation via Allocate for an access type whose designated subtype is S. The value of this attribute is of type universal_integer. See 13.11.1. S'Min For every scalar subtype S: S'Min denotes a function with the following specification: function S'Min(Left, Right : S'Base) return S'Base 134 135 136 136.1/2 136.2/2 136.3/2 136.4/2 137 138 139 140 141 142 143 144 144.1/3 144.2/3 145 146/3 147 148 149 771 13 December 2012 Language-Defined Attributes K.2 Ada Reference Manual — 2012 Edition 150 The function returns the lesser of the values of the two parameters. See 3.5. 150.1/2 S'Mod For every modular subtype S: 150.2/2 150.3/2 150.4/2 151 152 153 154 S'Mod denotes a function with the following specification: function S'Mod (Arg : universal_integer) return S'Base This function returns Arg mod S'Modulus, as a value of the type of S. See 3.5.4. S'Model For every subtype S of a floating point type T: S'Model denotes a function with the following specification: function S'Model (X : T) return T If the Numerics Annex is not supported, the meaning of this attribute is implementation defined; see G.2.2 for the definition that applies to implementations supporting the Numerics Annex. See A.5.3. 155 S'Model_Emin For every subtype S of a floating point type T: 156 If the Numerics Annex is not supported, this attribute yields an implementation defined value that is greater than or equal to the value of T'Machine_Emin. See G.2.2 for further requirements that apply to implementations supporting the Numerics Annex. The value of this attribute is of the type universal_integer. See A.5.3. 157 S'Model_Epsilon For every subtype S of a floating point type T: 158 Yields the value T'Machine_Radix1 – T'Model_Mantissa. The value of this attribute is of the type universal_real. See A.5.3. 159 S'Model_Mantissa For every subtype S of a floating point type T: 160 If the Numerics Annex is not supported, this attribute yields an implementation defined value that is greater than or equal to d · log(10) / log(T'Machine_Radix) + 1, where d is the requested decimal precision of T, and less than or equal to the value of T'Machine_Mantissa. See G.2.2 for further requirements that apply to implementations supporting the Numerics Annex. The value of this attribute is of the type universal_integer. See A.5.3. 161 S'Model_Small For every subtype S of a floating point type T: 162 163 164 Yields the value T'Machine_RadixT'Model_Emin – 1. The value of this attribute is of the type universal_real. See A.5.3. S'Modulus For every modular subtype S: S'Modulus yields the modulus of the type of S, as a value of the type universal_integer. See 3.5.4. 164.1/3 X'Old For a prefix X that denotes an object of a nonlimited type: 164.2/3 For each X'Old in a postcondition expression that is enabled, a constant is implicitly declared at the beginning of the subprogram or entry. The constant is of the type of X and is initialized to the result of evaluating X (as an expression) at the point of the constant declaration. The value of X'Old in the postcondition expression is the value of this constant; the type of X'Old is the type of X. These implicit constant declarations occur in an arbitrary order. See 6.1.1. K.2 Language-Defined Attributes 13 December 2012 772 Ada Reference Manual — 2012 Edition S'Class'Output For every subtype S'Class of a class-wide type T'Class: S'Class'Output denotes a procedure with the following specification: procedure S'Class'Output( Stream : not null access Ada.Streams.Root_Stream_Type'Class; Item : in T'Class) First writes the external tag of Item to Stream (by calling String'Output(Stream, Tags.- External_Tag(Item'Tag)) — see 3.9) and then dispatches to the subprogram denoted by the Output attribute of the specific type identified by the tag. Tag_Error is raised if the tag of Item identifies a type declared at an accessibility level deeper than that of S. See 13.13.2. S'Output For every subtype S of a specific type T: S'Output denotes a procedure with the following specification: procedure S'Output( Stream : not null access Ada.Streams.Root_Stream_Type'Class; Item : in T) 165 166 167/2 168/2 169 170 171/2 S'Output writes the value of Item to Stream, including any bounds or discriminants. See 13.13.2. 172 X'Overlaps_Storage For a prefix X that denotes an object: X'Overlaps_Storage denotes a function with the following specification: function X'Overlaps_Storage (Arg : any_type) return Boolean The actual parameter shall be a name that denotes an object. The object denoted by the actual parameter can be of any type. This function evaluates the names of the objects involved and returns True if the representation of the object denoted by the actual parameter shares at least one bit with the representation of the object denoted by X; otherwise, it returns False. See 13.3. For a prefix D that denotes a library-level declaration, excepting a declaration of or within a declared-pure library unit: Denotes a value of the type universal_integer that identifies the partition in which D was elaborated. If D denotes the declaration of a remote call interface library unit (see E.2.3) the given partition is the one where the body of D was elaborated. See E.1. D'Partition_Id S'Pos For every discrete subtype S: S'Pos denotes a function with the following specification: function S'Pos(Arg : S'Base) return universal_integer This function returns the position number of the value of Arg, as a value of type universal_integer. See 3.5.5. R.C'Position For a component C of a composite, non-array object R: If the nondefault bit ordering applies to the composite type, and if a component_clause specifies the placement of C, denotes the value given for the position of the component_clause; otherwise, denotes the same value as R.C'Address – R'Address. The value of this attribute is of the type universal_integer. See 13.5.2. S'Pred For every scalar subtype S: S'Pred denotes a function with the following specification: 172.1/3 172.2/3 172.3/3 172.4/3 173/1 174 175 176 177 178 179 180/2 181 182 773 13 December 2012 Language-Defined Attributes K.2 Ada Reference Manual — 2012 Edition 183 184 function S'Pred(Arg : S'Base) return S'Base For an enumeration type, the function returns the value whose position number is one less than that of the value of Arg; Constraint_Error is raised if there is no such value of the type. For an integer type, the function returns the result of subtracting one from the value of Arg. For a fixed point type, the function returns the result of subtracting small from the value of Arg. For a floating point type, the function returns the machine number (as defined in 3.5.7) immediately below the value of Arg; Constraint_Error is raised if there is no such machine number. See 3.5. 184.1/2 P'Priority For a prefix P that denotes a protected object: 184.2/2 Denotes a non-aliased component of the protected object P. This component is of type System.Any_Priority and its value is the priority of P. P'Priority denotes a variable if and only if P denotes a variable. A reference to this attribute shall appear only within the body of P. See D.5.2. 185/1 A'Range For a prefix A that is of an array type (after any implicit dereference), or denotes a constrained array subtype: 186 187 188 A'Range is equivalent to the range A'First .. A'Last, except that the prefix A is only evaluated once. See 3.6.2. S'Range For every scalar subtype S: S'Range is equivalent to the range S'First .. S'Last. See 3.5. 189/1 A'Range(N) For a prefix A that is of an array type (after any implicit dereference), or denotes a constrained array subtype: 190 191 192 193/2 194 195 196 197/2 198 199 200 201 202 A'Range(N) is equivalent to the range A'First(N) .. A'Last(N), except that the prefix A is only evaluated once. See 3.6.2. S'Class'Read For every subtype S'Class of a class-wide type T'Class: S'Class'Read denotes a procedure with the following specification: procedure S'Class'Read( Stream : not null access Ada.Streams.Root_Stream_Type'Class; Item : out T'Class) Dispatches to the subprogram denoted by the Read attribute of the specific type identified by the tag of Item. See 13.13.2. S'Read For every subtype S of a specific type T: S'Read denotes a procedure with the following specification: procedure S'Read( Stream : not null access Ada.Streams.Root_Stream_Type'Class; Item : out T) S'Read reads the value of Item from Stream. See 13.13.2. S'Remainder For every subtype S of a floating point type T: S'Remainder denotes a function with the following specification: function S'Remainder (X, Y : T) return T For nonzero Y, let v be the value X – n · Y, where n is the integer nearest to the exact value of X/Y; if |n – X/Y| = 1/2, then n is chosen to be even. If v is a machine number of the type T, the function yields v; otherwise, it yields zero. Constraint_Error is raised if Y is zero. A zero result has the sign of X when S'Signed_Zeros is True. See A.5.3. K.2 Language-Defined Attributes 13 December 2012 774 Ada Reference Manual — 2012 Edition F'Result For a prefix F that denotes a function declaration: Within a postcondition expression for function F, denotes the result object of the function. The type of this attribute is that of the function result except within a Post'Class postcondition expression for a function with a controlling result or with a controlling access result. For a controlling result, the type of the attribute is T'Class, where T is the function result type. For a controlling access result, the type of the attribute is an anonymous access type whose designated type is T'Class, where T is the designated type of the function result type. See 6.1.1. S'Round For every decimal fixed point subtype S: S'Round denotes a function with the following specification: function S'Round(X : universal_real) return S'Base The function returns the value obtained by rounding X (away from 0, if X is midway between two values of the type of S). See 3.5.10. S'Rounding For every subtype S of a floating point type T: S'Rounding denotes a function with the following specification: function S'Rounding (X : T) return T The function yields the integral value nearest to X, rounding away from zero if X lies exactly halfway between two integers. A zero result has the sign of X when S'Signed_Zeros is True. See A.5.3. S'Safe_First For every subtype S of a floating point type T: Yields the lower bound of the safe range (see 3.5.7) of the type T. If the Numerics Annex is not supported, the value of this attribute is implementation defined; see G.2.2 for the definition that applies to implementations supporting the Numerics Annex. The value of this attribute is of the type universal_real. See A.5.3. S'Safe_Last For every subtype S of a floating point type T: Yields the upper bound of the safe range (see 3.5.7) of the type T. If the Numerics Annex is not supported, the value of this attribute is implementation defined; see G.2.2 for the definition that applies to implementations supporting the Numerics Annex. The value of this attribute is of the type universal_real. See A.5.3. S'Scale For every decimal fixed point subtype S: S'Scale denotes the scale of the subtype S, defined as the value N such that S'Delta = 10.0**(–N). The scale indicates the position of the point relative to the rightmost significant digits of values of subtype S. The value of this attribute is of the type universal_integer. See 3.5.10. S'Scaling For every subtype S of a floating point type T: S'Scaling denotes a function with the following specification: function S'Scaling (X : T; Adjustment : universal_integer) return T Let v be the value X · T'Machine_RadixAdjustment. If v is a machine number of the type T, or if |v| ≥ T'Model_Small, the function yields v; otherwise, it yields either one of the machine numbers of the type T adjacent to v. Constraint_Error is optionally raised if v is outside the base range of S. A zero result has the sign of X when S'Signed_Zeros is True. See A.5.3. 202.1/3 202.2/3 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 775 13 December 2012 Language-Defined Attributes K.2 Ada Reference Manual — 2012 Edition 221 S'Signed_Zeros For every subtype S of a floating point type T: 222 223 224 225 226 227 Yields the value True if the hardware representation for the type T has the capability of representing both positively and negatively signed zeros, these being generated and used by the predefined operations of the type T as specified in IEC 559:1989; yields the value False otherwise. The value of this attribute is of the predefined type Boolean. See A.5.3. S'Size For every subtype S: If S is definite, denotes the size (in bits) that the implementation would choose for the following objects of subtype S: • A record component of subtype S when the record type is packed. • The formal parameter of an instance of Unchecked_Conversion that converts from subtype S to some other subtype. If S is indefinite, the meaning is implementation defined. The value of this attribute is of the type universal_integer. See 13.3. 228/1 X'Size For a prefix X that denotes an object: 229 230 231 Denotes the size in bits of the representation of the object. The value of this attribute is of the type universal_integer. See 13.3. S'Small For every fixed point subtype S: S'Small denotes the small of the type of S. The value of this attribute is of the type universal_real. See 3.5.10. 232 S'Storage_Pool For every access-to-object subtype S: 233 Denotes the storage pool of the type of S. The type of this attribute is Root_Storage_- Pool'Class. See 13.11. 234 S'Storage_Size For every access-to-object subtype S: 235 Yields the result of calling Storage_Size(S'Storage_Pool), which is intended to be a measure of the number of storage elements reserved for the pool. The type of this attribute is universal_integer. See 13.11. 236/1 T'Storage_Size 237 For a prefix T that denotes a task object (after any implicit dereference): Denotes the number of storage elements reserved for the task. The value of this attribute is of the type universal_integer. The Storage_Size includes the size of the task's stack, if any. The language does not specify whether or not it includes other storage associated with the task (such as the “task control block” used by some implementations.) See 13.3. 237.1/3 S'Stream_Size For every subtype S of an elementary type T: 237.2/3 237.3/2 237.4/2 Denotes the number of bits read from or written to a stream by the default implementations of S'Read and S'Write. Hence, the number of stream elements required per item of elementary type T is: T'Stream_Size / Ada.Streams.Stream_Element'Size The value of Stream_Element'Size. See 13.13.2. this attribute is of type universal_integer and is a multiple of 238 S'Succ For every scalar subtype S: K.2 Language-Defined Attributes 13 December 2012 776 Ada Reference Manual — 2012 Edition S'Succ denotes a function with the following specification: function S'Succ(Arg : S'Base) return S'Base For an enumeration type, the function returns the value whose position number is one more than that of the value of Arg; Constraint_Error is raised if there is no such value of the type. For an integer type, the function returns the result of adding one to the value of Arg. For a fixed point type, the function returns the result of adding small to the value of Arg. For a floating point type, the function returns the machine number (as defined in 3.5.7) immediately above the value of Arg; Constraint_Error is raised if there is no such machine number. See 3.5. S'Tag For every subtype S of a tagged type T (specific or class-wide): S'Tag denotes the tag of the type T (or if T is class-wide, the tag of the root type of the corresponding class). The value of this attribute is of type Tag. See 3.9. X'Tag For a prefix X that is of a class-wide tagged type (after any implicit dereference): X'Tag denotes the tag of X. The value of this attribute is of type Tag. See 3.9. T'Terminated For a prefix T that is of a task type (after any implicit dereference): Yields the value True if the task denoted by T is terminated, and False otherwise. The value of this attribute is of the predefined type Boolean. See 9.9. S'Truncation For every subtype S of a floating point type T: S'Truncation denotes a function with the following specification: function S'Truncation (X : T) return T The function yields the value X when X is negative, and X otherwise. A zero result has the sign of X when S'Signed_Zeros is True. See A.5.3. S'Unbiased_Rounding For every subtype S of a floating point type T: S'Unbiased_Rounding denotes a function with the following specification: function S'Unbiased_Rounding (X : T) return T The function yields the integral value nearest to X, rounding toward the even integer if X lies exactly halfway between two integers. A zero result has the sign of X when S'Signed_Zeros is True. See A.5.3. X'Unchecked_Access For a prefix X that denotes an aliased view of an object: rules and semantics All to X'Unchecked_Access, except that, for the purposes of accessibility rules and checks, it is as if X were declared immediately within a library package. See 13.10. (see 3.10.2) apply also to X'Access that apply S'Val For every discrete subtype S: S'Val denotes a function with the following specification: function S'Val(Arg : universal_integer) return S'Base This function returns a value of the type of S whose position number equals the value of Arg. See 3.5.5. X'Valid For a prefix X that denotes a scalar object (after any implicit dereference): 777 13 December 2012 Language-Defined Attributes K.2 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 Ada Reference Manual — 2012 Edition 263/3 264 265 266 267 Yields True if and only if the object denoted by X is normal, has a valid representation, and the predicate of the nominal subtype of X evaluates to True. The value of this attribute is of the predefined type Boolean. See 13.9.2. S'Value For every scalar subtype S: S'Value denotes a function with the following specification: function S'Value(Arg : String) return S'Base This function returns a value given an image of the value as a String, ignoring any leading or trailing spaces. See 3.5. 268/1 P'Version For a prefix P that statically denotes a program unit: 269 270 271 272 273/3 Yields a value of the predefined type String that identifies the version of the compilation unit that contains the declaration of the program unit. See E.3. S'Wide_Image For every scalar subtype S: S'Wide_Image denotes a function with the following specification: function S'Wide_Image(Arg : S'Base) return Wide_String The function returns an image of the value of Arg as a Wide_String. See 3.5. 274 S'Wide_Value For every scalar subtype S: 275 276 277 S'Wide_Value denotes a function with the following specification: function S'Wide_Value(Arg : Wide_String) return S'Base This function returns a value given an image of the value as a Wide_String, ignoring any leading or trailing spaces. See 3.5. 277.1/2 S'Wide_Wide_Image For every scalar subtype S: 277.2/2 277.3/2 277.4/2 S'Wide_Wide_Image denotes a function with the following specification: function S'Wide_Wide_Image(Arg : S'Base) return Wide_Wide_String The function returns an image of the value of Arg, that is, a sequence of characters representing the value in display form. See 3.5. 277.5/2 S'Wide_Wide_Value For every scalar subtype S: 277.6/2 277.7/2 277.8/2 S'Wide_Wide_Value denotes a function with the following specification: function S'Wide_Wide_Value(Arg : Wide_Wide_String) return S'Base This function returns a value given an image of the value as a Wide_Wide_String, ignoring any leading or trailing spaces. See 3.5. 277.9/2 S'Wide_Wide_Width For every scalar subtype S: 277.10/2 S'Wide_Wide_Width denotes the maximum length of a Wide_Wide_String returned by S'Wide_Wide_Image over all values of the subtype S. It denotes zero for a subtype that has a null range. Its type is universal_integer. See 3.5. K.2 Language-Defined Attributes 13 December 2012 778 Ada Reference Manual — 2012 Edition S'Wide_Width For every scalar subtype S: S'Wide_Width denotes the maximum length of a Wide_String returned by S'Wide_Image over all values of the subtype S. It denotes zero for a subtype that has a null range. Its type is universal_integer. See 3.5. S'Width For every scalar subtype S: S'Width denotes the maximum length of a String returned by S'Image over all values of the subtype S. It denotes zero for a subtype that has a null range. Its type is universal_integer. See 3.5. S'Class'Write For every subtype S'Class of a class-wide type T'Class: S'Class'Write denotes a procedure with the following specification: procedure S'Class'Write( Stream : not null access Ada.Streams.Root_Stream_Type'Class; Item : in T'Class) 278 279 280 281 282 283 284/2 Dispatches to the subprogram denoted by the Write attribute of the specific type identified by the tag of Item. See 13.13.2. 285 S'Write For every subtype S of a specific type T: S'Write denotes a procedure with the following specification: procedure S'Write( Stream : not null access Ada.Streams.Root_Stream_Type'Class; Item : in T) S'Write writes the value of Item to Stream. See 13.13.2. 286 287 288/2 289 779 13 December 2012 Language-Defined Attributes K.2 Ada Reference Manual — 2012 Edition Annex L (informative) Language-Defined Pragmas This Annex summarizes the definitions given elsewhere of the language-defined pragmas. pragma All_Calls_Remote[(library_unit_name)]; — See E.2.3. pragma Assert([Check =>] boolean_expression[, [Message =>] string_expression]); — See 11.4.2. pragma Assertion_Policy(policy_identifier); — See 11.4.2. pragma Assertion_Policy( assertion_aspect_mark => policy_identifier {, assertion_aspect_mark => policy_identifier}); — See 11.4.2. This paragraph was deleted. pragma Asynchronous (local_name); — See J.15.13. This paragraph was deleted. pragma Atomic (local_name); — See J.15.8. This paragraph was deleted. pragma Atomic_Components (array_local_name); — See J.15.8. This paragraph was deleted. pragma Attach_Handler (handler_name, expression); — See J.15.7. This paragraph was deleted. This paragraph was deleted. pragma Convention([Convention =>] convention_identifier,[Entity =>] local_name); — See J.15.5. pragma CPU (expression); — See J.15.9. pragma Default_Storage_Pool (storage_pool_indicator); — See 13.11.3. pragma Detect_Blocking; — See H.5. pragma Discard_Names[([On => ] local_name)]; — See C.5. pragma Dispatching_Domain (expression); — See J.15.10. pragma Elaborate(library_unit_name{, library_unit_name}); — See 10.2.1. pragma Elaborate_All(library_unit_name{, library_unit_name}); — See 10.2.1. pragma Elaborate_Body[(library_unit_name)]; — See 10.2.1. This paragraph was deleted. pragma Export( [Convention =>] convention_identifier, [Entity =>] local_name [, [External_Name =>] external_name_string_expression] 781 13 December 2012 Language-Defined Pragmas Annex L 1 2 2.1/2 2.2/2 2.3/3 3/3 3.1/3 4/3 4.1/3 5/3 5.1/3 6/3 6.1/3 7/3 8/3 8.1/3 8.2/3 8.3/3 8.4/2 9 9.1/3 10 11 12 13/3 13.1/3 Ada Reference Manual — 2012 Edition [, [Link_Name =>] link_name_string_expression]); — See J.15.5. 14/3 This paragraph was deleted. 14.1/3 pragma Import( [Convention =>] convention_identifier, [Entity =>] local_name [, [External_Name =>] external_name_string_expression] [, [Link_Name =>] link_name_string_expression]); — See J.15.5. 14.2/3 pragma Independent (component_local_name); — See J.15.8. 14.3/3 pragma Independent_Components (local_name); — See J.15.8. 15/3 This paragraph was deleted. 15.1/3 pragma Inline (name{, name}); — See J.15.1. 16 pragma Inspection_Point[(object_name {, object_name})]; — See H.3.2. 17/3 This paragraph was deleted. 17.1/3 pragma Interrupt_Handler (handler_name); — See J.15.7. 18/3 This paragraph was deleted. 18.1/3 pragma Interrupt_Priority [(expression);] — See J.15.11. 19 20 21 pragma Linker_Options(string_expression); — See B.1. pragma List(identifier); — See 2.8. pragma Locking_Policy(policy_identifier); — See D.3. 21.1/3 This paragraph was deleted. 21.2/3 pragma No_Return (procedure_local_name{, procedure_local_name}); — See J.15.2. 22 23 pragma Normalize_Scalars; — See H.1. pragma Optimize(identifier); — See 2.8. 24/3 This paragraph was deleted. 24.1/3 pragma Pack (first_subtype_local_name); — See J.15.3. 25 pragma Page; — See 2.8. 25.1/2 pragma Partition_Elaboration_Policy (policy_identifier); — See H.6. 25.2/2 pragma Preelaborable_Initialization(direct_name); — See 10.2.1. 26 pragma Preelaborate[(library_unit_name)]; — See 10.2.1. 27/3 This paragraph was deleted. 27.1/3 pragma Priority (expression); — See J.15.11. 27.2/2 pragma Priority_Specific_Dispatching ( policy_identifier, first_priority_expression, last_priority_expression); — See D.2.2. 27.3/3 pragma Profile (profile_identifier {, profile_pragma_argument_association}); — See 13.12. Annex L Language-Defined Pragmas 13 December 2012 782 Ada Reference Manual — 2012 Edition This paragraph was deleted. pragma Pure[(library_unit_name)]; — See 10.2.1. pragma Queuing_Policy(policy_identifier); — See D.4. This paragraph was deleted. pragma Relative_Deadline (relative_deadline_expression); — See J.15.12. pragma Remote_Call_Interface[(library_unit_name)]; — See E.2.3. pragma Remote_Types[(library_unit_name)]; — See E.2.2. pragma Restrictions(restriction{, restriction}); — See 13.12. pragma Reviewable; — See H.3.1. pragma Shared_Passive[(library_unit_name)]; — See E.2.1. This paragraph was deleted. pragma Storage_Size (expression); — See J.15.4. pragma Suppress(identifier); — See 11.5. pragma Task_Dispatching_Policy(policy_identifier); — See D.2.2. This paragraph was deleted. pragma Unchecked_Union (first_subtype_local_name); — See J.15.6. pragma Unsuppress(identifier); — See 11.5. This paragraph was deleted. pragma Volatile (local_name); — See J.15.8. This paragraph was deleted. pragma Volatile_Components (array_local_name); — See J.15.8. 27.4/3 28 29 29.1/3 29.2/3 30 31 32 33 34 35/3 35.1/3 36 37 37.1/3 37.2/3 37.3/2 38/3 38.1/3 39/3 39.1/3 783 13 December 2012 Language-Defined Pragmas Annex L Ada Reference Manual — 2012 Edition Annex M (informative) Summary of Documentation Requirements The Ada language allows for certain target machine dependences in a controlled manner. Each Ada implementation must document many characteristics and properties of the target system. This International Standard contains specific documentation requirements. In addition, many characteristics that require documentation are identified throughout this International Standard as being implementation defined. Finally, this International Standard requires documentation of whether implementation advice is followed. The following subclauses provide summaries of these documentation requirements. 1/3 M.1 Specific Documentation Requirements In addition to implementation-defined characteristics, each Ada implementation must document various properties of the implementation: • The behavior of implementations in implementation-defined situations shall be documented — see M.2, “Implementation-Defined Characteristics” for a listing. See 1.1.3(19). • The set of values that a user-defined Allocate procedure needs to accept for the Alignment parameter. How the standard storage pool is chosen, and how storage is allocated by standard storage pools. See 13.11(22). • The algorithm used for random number generation, including a description of its period. See A.5.2(44). • The minimum time interval between calls to the time-dependent Reset procedure that is guaranteed to initiate different random number sequences. See A.5.2(45). • The conditions under which Io_Exceptions.Name_Error, Io_Exceptions.Use_Error, and Io_Exceptions.Device_Error are propagated. See A.13(15). • The behavior of package Environment_Variables when environment variables are changed by external mechanisms. See A.17(30/2). • The overhead of calling machine-code or intrinsic subprograms. See C.1(6). • The types and attributes used in machine code insertions. See C.1(7). • The subprogram calling conventions for all supported convention identifiers. See C.1(8/3). • The mapping between the Link_Name or Ada designator and the external link name. See C.1(9). • The treatment of interrupts. See C.3(22). • The metrics for interrupt handlers. See C.3.1(16). • If the Ceiling_Locking policy is in effect, the default ceiling priority for a protected object that specifies an interrupt handler aspect. See C.3.2(24/3). • Any circumstances when the elaboration of a preelaborated package causes code to be executed. See C.4(12). • Whether a partition can be restarted without reloading. See C.4(13). • The effect of calling Current_Task from an entry body or interrupt handler. See C.7.1(19). 1/2 2/2 3/2 4/2 5/2 6/2 7/2 8/2 9/2 10/2 11/2 12/2 13/2 14/3 15/2 16/2 17/2 785 13 December 2012 Summary of Documentation Requirements Annex M Ada Reference Manual — 2012 Edition 18/2 • For package Task_Attributes, limits on the number and size of task attributes, and how to configure any limits. See C.7.2(19). 19/2 20/2 21/2 • The metrics for the Task_Attributes package. See C.7.2(27). • The details of the configuration used to generate the values of all metrics. See D(2). • The maximum priority inversion a user task can experience from the implementation. See D.2.3(12/2). 22/2 • The amount of time that a task can be preempted for processing on behalf of lower-priority tasks. See D.2.3(13/2). 23/2 24/2 • The quantum values supported for round robin dispatching. See D.2.5(16/2). • The accuracy of the detection of the exhaustion of the budget of a task for round robin dispatching. See D.2.5(17/2). 25/2 • Any conditions that cause the completion of the setting of the deadline of a task to be delayed for a multiprocessor. See D.2.6(32/2). 26/2 • Any conditions that cause the completion of the setting of the priority of a task to be delayed for a multiprocessor. See D.5.1(12.1/2). 27/2 28/2 29/2 30/2 31/2 32/2 33/2 34/2 35/2 36/2 • The metrics for Set_Priority. See D.5.1(14). • The metrics for setting the priority of a protected object. See D.5.2(10). • On a multiprocessor, any conditions that cause the completion of an aborted construct to be delayed later than what is specified for a single processor. See D.6(3). • The metrics for aborts. See D.6(8). • The values of Time_First, Time_Last, Time_Span_First, Time_Span_Last, Time_Span_Unit, and Tick for package Real_Time. See D.8(33). • The properties of the underlying time base used in package Real_Time. See D.8(34). • Any synchronization of package Real_Time with external time references. See D.8(35). • Any aspects of the external environment that could interfere with package Real_Time. See D.8(36/3). • The metrics for package Real_Time. See D.8(45). • The minimum value of the delay expression of a delay_relative_statement that causes a task to actually be blocked. See D.9(7). 37/2 • The minimum difference between the value of the delay expression of a delay_until_statement and the value of Real_Time.Clock, that causes the task to actually be blocked. See D.9(8). 38/2 39/2 40/2 41/2 • The metrics for delay statements. See D.9(13). • The upper bound on the duration of interrupt blocking caused by the implementation. See D.12(5). • The metrics for entry-less protected objects. See D.12(12). • The values of CPU_Time_First, CPU_Time_Last, CPU_Time_Unit, and CPU_Tick of package Execution_Time. See D.14(21/2). 42/3 • The properties of the mechanism used to implement package Execution_Time, including the values of the constants defined in the package. See D.14(22/2). 43/2 • The metrics for execution time. See D.14(27). M.1 Specific Documentation Requirements 13 December 2012 786 Ada Reference Manual — 2012 Edition • The metrics for timing events. See D.15(24). • The processor(s) on which the clock interrupt is handled; the processors on which each 44/2 44.1/3 Interrupt_Id can be handled. See D.16.1(32). • Whether the RPC-receiver is invoked from concurrent tasks, and if so, the number of such tasks. See E.5(25). • Any techniques used to reduce cancellation errors in Numerics.Generic_Real_Arrays shall be documented. See G.3.1(86/2). • Any techniques used to reduce cancellation errors in Numerics.Generic_Complex_Arrays shall be documented. See G.3.2(155/2). • If a pragma Normalize_Scalars applies, the implicit initial values of scalar subtypes shall be documented. Such a value should be an invalid representation when possible; any cases when is it not shall be documented. See H.1(5/2). • The range of effects for each bounded error and each unspecified effect. If the effects of a given erroneous construct are constrained, the constraints shall be documented. See H.2(1). • For each inspection point, a mapping between each inspectable object and the machine resources where the object's value can be obtained shall be provided. See H.3.2(8). • If a pragma Restrictions(No_Exceptions) is specified, the effects of all constructs where language-defined checks are still performed. See H.4(25). • The interrupts to which a task entry may be attached. See J.7.1(12). • The type of entry call invoked for an interrupt entry. See J.7.1(13). M.2 Implementation-Defined Characteristics The Ada language allows for certain machine dependences in a controlled manner. Each Ada implementation must document all implementation-defined characteristics: • Whether or not each recommendation given in Implementation Advice is followed — see M.3, “Implementation Advice” for a listing. See 1.1.2(37). • Capacity limitations of the implementation. See 1.1.3(3). • Variations from the standard that are impractical to avoid given the implementation's execution environment. See 1.1.3(6). • Which code_statements cause external interactions. See 1.1.3(10). • The coded representation for the text of an Ada program. See 2.1(4/3). • The semantics of an Ada program whose text is not in Normalization Form KC. See 2.1(4.1/3). • This paragraph was deleted. • The representation for an end of line. See 2.2(2/3). • Maximum supported line length and lexical element length. See 2.2(14). • Implementation-defined pragmas. See 2.8(14). • Effect of pragma Optimize. See 2.8(27). • The sequence of characters of the value returned by S'Wide_Image when some of the graphic characters of S'Wide_Wide_Image are not defined in Wide_Character. See 3.5(30/3). 45/2 46/2 47/2 48/2 49/2 50/2 51/2 52/2 53/2 1/2 2/2 3 4 5 6 6.1/2 7/2 8 9 10 11 11.1/2 787 13 December 2012 Specific Documentation Requirements M.1 Ada Reference Manual — 2012 Edition 12/2 • The sequence of characters of the value returned by S'Image when some of the graphic characters of S'Wide_Wide_Image are not defined in Character. See 3.5(37/3). 13 14 15 16 17 18 19 20/2 20.1/2 • The predefined integer types declared in Standard. See 3.5.4(25). • Any nonstandard integer types and the operators defined for them. See 3.5.4(26). • Any nonstandard real types and the operators defined for them. See 3.5.6(8). • What combinations of requested decimal precision and range are supported for floating point types. See 3.5.7(7). • The predefined floating point types declared in Standard. See 3.5.7(16). • The small of an ordinary fixed point type. See 3.5.9(8/2). • What combinations of small, range, and digits are supported for fixed point types. See 3.5.9(10). • The result of Tags.Wide_Wide_Expanded_Name for types declared within an unnamed block_statement. See 3.9(10). • The sequence of characters of the value returned by Tags.Expanded_Name (respectively, of some Tags.Wide_Expanded_Name) Tags.Wide_Wide_Expanded_Name are not defined in Character (respectively, Wide_Character). See 3.9(10.1/2). characters graphic when the of 21 21.1/2 • Implementation-defined attributes. See 4.1.4(12/1). • Rounding of real static expressions which are exactly half-way between two machine numbers. See 4.9(38/2). 22 23 24 25/2 26 26.1/2 27/3 28 29 30 • Any implementation-defined time types. See 9.6(6/3). • The time base associated with relative delays. See 9.6(20). • The time base of the type Calendar.Time. See 9.6(23). • The time zone used for package Calendar operations. See 9.6(24/2). • Any limit on delay_until_statements of select_statements. See 9.6(29). • The result of Calendar.Formating.Image if its argument represents more than 100 hours. See 9.6.1(86/2). • This paragraph was deleted. • The representation for a compilation. See 10.1(2). • Any restrictions on compilations that contain multiple compilation_units. See 10.1(4). • The mechanisms for creating an environment and for adding and replacing compilation units. See 10.1.4(3/2). 30.1/2 • The mechanisms for adding a compilation unit mentioned in a limited_with_clause to an environment. See 10.1.4(3/2). 31 32 33 34 35 • The manner of explicitly assigning library units to a partition. See 10.2(2). • The implementation-defined means, if any, of specifying which compilation units are needed by a given compilation unit. See 10.2(2). • The manner of designating the main subprogram of a partition. See 10.2(7). • The order of elaboration of library_items. See 10.2(18). • Parameter passing and function return for the main subprogram. See 10.2(21). M.2 Implementation-Defined Characteristics 13 December 2012 788 Ada Reference Manual — 2012 Edition • The mechanisms for building and running partitions. See 10.2(24). • The details of program execution, including program termination. See 10.2(25). • The semantics of any nonactive partitions supported by the implementation. See 10.2(28/3). • The information returned by Exception_Message. See 11.4.1(10.1/3). • The result of Exceptions.Wide_Wide_Exception_Name for exceptions declared within an unnamed block_statement. See 11.4.1(12). • The sequence of characters of the value returned by Exceptions.Exception_Name (respectively, of (respectively, Exceptions.Wide_Exception_Name) when Exceptions.Wide_Wide_Exception_Name are not defined Wide_Character). See 11.4.1(12.1/2). graphic in Character characters some the of • The information returned by Exception_Information. See 11.4.1(13/2). • Implementation-defined policy_identifiers and assertion_aspect_marks allowed in a pragma Assertion_Policy. See 11.4.2(9/3). • The default assertion policy. See 11.4.2(10). • Implementation-defined check names. See 11.5(27). • Existence and meaning of second parameter of pragma Unsuppress. See 11.5(27.1/2). • The cases that cause conflicts between the representation of the ancestors of a type_declaration. See 13.1(13.1/3). • The interpretation of each representation aspect. See 13.1(20). • Any restrictions placed upon the specification of representation aspects. See 13.1(20). • Implementation-defined aspects, inluding the syntax for specifying such aspects and the legality rules for such aspects. See 13.1.1(38). • The set of machine scalars. See 13.3(8.1/3). • The meaning of Size for indefinite subtypes. See 13.3(48). • The default external representation for a type tag. See 13.3(75/3). • What determines whether a compilation unit is the same in two different partitions. See 13.3(76). • Implementation-defined components. See 13.5.1(15). • If Word_Size = Storage_Unit, the default bit ordering. See 13.5.3(5). • The contents of the visible part of package System. See 13.7(2). • The of Storage_Elements.Storage_Offset, Storage_Elements.Storage_Element, and the declaration of Storage_Elements.Integer_Address.. See 13.7.1(11). modulus range the of 36 37 38 39 40/2 40.1/2 41 41.1/3 41.2/2 42 42.1/2 42.2/2 43/3 44/3 44.1/3 44.2/2 45 46 47 48 49 50/2 50.1/2 • The contents of the visible part of package System.Machine_Code, and the meaning of 51 code_statements. See 13.8(7). • The result of unchecked conversion for instances with scalar result types whose result is not 51.1/2 defined by the language. See 13.9(11). • The effect of unchecked conversion for instances with nonscalar result types whose effect is not defined by the language. See 13.9(11). • This paragraph was deleted. 52/2 53/2 789 13 December 2012 Implementation-Defined Characteristics M.2 Ada Reference Manual — 2012 Edition 54 • Whether or not the implementation provides user-accessible names for the standard pool type(s). See 13.11(17). 55/2 • The meaning of Storage_Size when neither the Storage_Size nor the Storage_Pool is specified for an access type. See 13.11(18). 56/2 57/3 57.1/3 58 58.1/3 59/2 • This paragraph was deleted. • This paragraph was deleted. • Implementation-defined restrictions allowed in a pragma Restrictions. See 13.12(8.7/3). • The consequences of violating limitations on Restrictions pragmas. See 13.12(9). • Implementation-defined usage profiles allowed in a pragma Profile. See 13.12(15). • The contents of the stream elements read and written by the Read and Write attributes of elementary types. See 13.13.2(9). 60 • The names and characteristics of the numeric subtypes declared in the visible part of package Standard. See A.1(3). 60.1/2 61 62 63 64 65/2 66 67/2 68 69/2 70 71/2 72 72.1/1 73/2 73.1/2 73.2/2 73.3/2 73.4/2 73.5/2 • The values returned by Strings.Hash. See A.4.9(3/2). • The accuracy actually achieved by the elementary functions. See A.5.1(1). • The the operators or Numerics.Generic_Elementary_Functions, when Float_Type'Signed_Zeros A.5.1(46). some of sign of result from zero a functions in is True. See • The value of Numerics.Float_Random.Max_Image_Width. See A.5.2(27). • The value of Numerics.Discrete_Random.Max_Image_Width. See A.5.2(27). • This paragraph was deleted. • The string representation of a random number generator's state. See A.5.2(38). • This paragraph was deleted. • The values of the Model_Mantissa, Model_Emin, Model_Epsilon, Model, Safe_First, and Safe_Last attributes, if the Numerics Annex is not supported. See A.5.3(72). • This paragraph was deleted. • The value of Buffer_Size in Storage_IO. See A.9(10). • The external files associated with the standard input, standard output, and standard error files. See A.10(5). • The accuracy of the value produced by Put. See A.10.9(36). • Current size for a stream file for which positioning is not supported. See A.12.1(1.1/1). • The meaning of Argument_Count, Argument, and Command_Name Command_Line. The bounds of type Command_Line.Exit_Status. See A.15(1). for package • The interpretation of file names and directory names. See A.16(46/2). • The maximum value for a file size in Directories. See A.16(87/2). • The result for Directories.Size for a directory or special file See A.16(93/2). • The result for Directories.Modification_Time for a directory or special file. See A.16(95/2). • The interpretation of a nonnull search pattern in Directories. See A.16(104/3). M.2 Implementation-Defined Characteristics 13 December 2012 790 Ada Reference Manual — 2012 Edition • The results of a Directories search if the contents of the directory are altered while a search is in 73.6/2 progress. See A.16(110/3). • The definition and meaning of an environment variable. See A.17(1/2). • The circumstances where an environment variable cannot be defined. See A.17(16/2). • Environment names for which Set has the effect of Clear. See A.17(17/2). • The value of Containers.Hash_Type'Modulus. The value of Containers.Count_Type'Last. See 73.7/2 73.8/2 73.9/2 73.10/2 A.18.1(7/2). • Implementation-defined convention names. See B.1(11/3). • The meaning of link names. See B.1(36). • The manner of choosing link names when neither the link name nor the address of an imported or exported entity is specified. See B.1(36). • The effect of pragma Linker_Options. See B.1(37). • The contents of the visible part of package Interfaces and its language-defined descendants. See B.2(1). • Implementation-defined children of package Interfaces. See B.2(11). • The definitions of certain types and constants in Interfaces.C. See B.3(41). • The types Floating, Long_Floating, Binary, Long_Binary, Decimal_Element, and the variables Ada_To_COBOL and COBOL_Character; and COBOL_To_Ada, in Interfaces.COBOL. See B.4(50). initializations of the • The types Fortran_Integer, Real, Double_Precision, and Character_Set in Interfaces.Fortran. See B.5(17). • Implementation-defined intrinsic subprograms. See C.1(1/3). • This paragraph was deleted. • This paragraph was deleted. • Any restrictions on a protected procedure or its containing type when an aspect Attach_handler or Interrupt_Handler is specified. See C.3.1(17). • Any other forms of interrupt handler supported by the Attach_Handler and Interrupt_Handler aspects. See C.3.1(19). • This paragraph was deleted. • The semantics of pragma Discard_Names. See C.5(7). • The result of the Task_Identification.Image attribute. See C.7.1(7). • The value of Current_Task when in a protected entry, interrupt handler, or finalization of a task attribute. See C.7.1(17/3). • This paragraph was deleted. • Granularity of locking for Task_Attributes. See C.7.2(16/1). • This paragraph was deleted. • This paragraph was deleted. • The declarations of Any_Priority and Priority. See D.1(11). • Implementation-defined execution resources. See D.1(15). 791 13 December 2012 Implementation-Defined Characteristics M.2 74 75 76 77 78 79/2 79.1/2 80/1 80.1/1 81/2 82/2 83/2 83.1/3 83.2/3 84/2 85 86 87/2 88/2 88.1/1 89/2 90/2 91 92 Ada Reference Manual — 2012 Edition 93 • Whether, on a multiprocessor, a task that is waiting for access to a protected object keeps its processor busy. See D.2.1(3). 94/2 95/2 96/2 97/2 97.1/2 98 98.1/2 99 100 101 102/2 103 103.1/2 103.2/2 103.3/2 103.4/2 104/2 105/2 106/2 106.1/3 106.2/3 107/2 107.1/3 107.2/3 107.3/3 107.4/3 • The effect of implementation-defined execution resources on task dispatching. See D.2.1(9/2). • This paragraph was deleted. • This paragraph was deleted. • Implementation defined task dispatching policies. See D.2.2(19). • The value of Default_Quantum in Dispatching.Round_Robin. See D.2.5(4). • Implementation-defined policy_identifiers allowed in a pragma Locking_Policy. See D.3(4). • The locking policy if no Locking_Policy pragma applies to any unit of a partition. See D.3(6). • Default ceiling priorities. See D.3(10/3). • The ceiling of any protected object used internally by the implementation. See D.3(16). • Implementation-defined queuing policies. See D.4(1/3). • This paragraph was deleted. • Any operations that implicitly require heap storage allocation. See D.7(8). • When restriction No_Task_Termination applies to a partition, what happens when a task terminates. See D.7(15.1/2). • The behavior when restriction Max_Storage_At_Blocking is violated. See D.7(17/1). • The behavior when restriction Max_Asynchronous_Select_Nesting is violated. See D.7(18/1). • The behavior when restriction Max_Tasks is violated. See D.7(19). • Whether the use of pragma Restrictions results in a reduction in program code or data size or execution time. See D.7(20). • This paragraph was deleted. • This paragraph was deleted. • The value of Barrier_Limit'Last in Synchronous_Barriers. See D.10.1(4/3). • When an aborted task that is waiting on a Synchronous_Barrier is aborted. See D.10.1(13/3). • This paragraph was deleted. • The processor on which a task with a CPU value of a Not_A_Specific_CPU will execute when the Ravenscar profile is in effect. See D.13(8). • The value of Min_Handler_Ceiling in Execution_Time.Group_Budgets. See D.14.2(7/2). • The value of CPU_Range'Last in System.Multiprocessors. See D.16(4/3). • The processor on which the environment task executes in the absence of a value for the aspect CPU. See D.16(13/3). 108 109 110 • The means for creating and executing distributed programs. See E(5). • Any events that can result in a partition becoming inaccessible. See E.1(7). • The scheduling policies, treatment of priorities, and management of shared resources between partitions in certain cases. See E.1(11). 111/1 • This paragraph was deleted. M.2 Implementation-Defined Characteristics 13 December 2012 792 • Whether the execution of the remote subprogram is immediately aborted as a result of 112 cancellation. See E.4(13). Ada Reference Manual — 2012 Edition • The range of type System.RPC.Partition_Id. See E.5(14). • This paragraph was deleted. • Implementation-defined interfaces in the PCS. See E.5(26). • The values of named numbers in the package Decimal. See F.2(7). • The value of Max_Picture_Length in the package Text_IO.Editing See F.3.3(16). • The value of Max_Picture_Length in the package Wide_Text_IO.Editing See F.3.4(5). • The value of Max_Picture_Length in the package Wide_Wide_Text_IO.Editing See F.3.5(5). • The accuracy actually achieved by the complex elementary functions and by other complex arithmetic operations. See G.1(1). • The sign of a zero result (or a component thereof) from any operator or function in Numerics.Generic_Complex_Types, when Real'Signed_Zeros is True. See G.1.1(53). • The sign of a zero result (or a component thereof) from any operator or function in Numerics.Generic_Complex_Elementary_Functions, when Complex_Types.Real'Signed_Zeros is True. See G.1.2(45). • Whether the strict mode or the relaxed mode is the default. See G.2(2). • The result interval in certain cases of fixed-to-float conversion. See G.2.1(10). • The result of a floating point arithmetic operation in overflow situations, when the Machine_Overflows attribute of the result type is False. See G.2.1(13). • The result interval for division (or exponentiation by a negative exponent), when the floating point hardware implements division as multiplication by a reciprocal. See G.2.1(16). • The definition of close result set, which determines the accuracy of certain fixed point multiplications and divisions. See G.2.3(5). • Conditions on a universal_real operand of a fixed point multiplication or division for which the result shall be in the perfect result set. See G.2.3(22). • The result of a fixed point arithmetic operation in overflow situations, when the Machine_Overflows attribute of the result type is False. See G.2.3(27). • The result of an elementary function reference in overflow situations, when the Machine_Overflows attribute of the result type is False. See G.2.4(4). • The value of the angle threshold, within which certain elementary functions, complex arithmetic operations, and complex elementary functions yield results conforming to a maximum relative error bound. See G.2.4(10). • The accuracy of certain elementary functions for parameters beyond the angle threshold. See G.2.4(10). • The result of a complex arithmetic operation or complex elementary function reference in overflow situations, when the Machine_Overflows attribute of the corresponding real type is False. See G.2.6(5). • The accuracy of certain complex arithmetic operations and certain complex elementary functions for parameters (or components thereof) beyond the angle threshold. See G.2.6(8). 112.1/2 113/2 114 115 116 117 117.1/2 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 • The accuracy requirements for the subprograms Solve, Inverse, Determinant, Eigenvalues and 132.1/2 Eigensystem for type Real_Matrix. See G.3.1(81/2). 793 13 December 2012 Implementation-Defined Characteristics M.2 Ada Reference Manual — 2012 Edition 132.2/2 • The accuracy requirements for the subprograms Solve, Inverse, Determinant, Eigenvalues and Eigensystem for type Complex_Matrix. See G.3.2(149/2). 133/2 134/2 135/2 136/2 136.1/2 • This paragraph was deleted. • This paragraph was deleted. • This paragraph was deleted. • This paragraph was deleted. • Implementation-defined policy_identifiers allowed in a pragma Partition_Elaboration_Policy. See H.6(4/2). M.3 Implementation Advice 1/2 2/2 3/2 4/2 5/2 6/2 7/2 8/2 9/2 This International Standard sometimes gives advice about handling certain target machine dependences. Each Ada implementation must document whether that advice is followed: • Program_Error should be raised when an unsupported Specialized Needs Annex feature is used at run time. See 1.1.3(20). • Implementation-defined extensions to the functionality of a language-defined library unit should be provided by adding children to the library unit. See 1.1.3(21). • If a bounded error or erroneous execution is detected, Program_Error should be raised. See 1.1.5(12). • Implementation-defined pragmas should have no semantic effect for error-free programs. See 2.8(16/3). • Implementation-defined pragmas should not make an illegal program legal, unless they complete a declaration or configure the library_items in an environment. See 2.8(19). • Long_Integer should be declared in Standard if the target supports 32-bit arithmetic. No other named integer subtypes should be declared in Standard. See 3.5.4(28). • For a two's complement target, modular types with a binary modulus up to System.Max_Int*2+2 should be supported. A nonbinary modulus up to Integer'Last should be supported. See 3.5.4(29). • Program_Error should be raised for the evaluation of S'Pos for an enumeration type, if the value of the operand does not correspond to the internal code for any enumeration literal of the type. See 3.5.5(8). 10/2 • Long_Float should be declared in Standard if the target supports 11 or more digits of precision. No other named float subtypes should be declared in Standard. See 3.5.7(17). 11/2 • Multidimensional arrays should be represented in row-major order, unless the array has convention Fortran. See 3.6.2(11/3). 12/3 • Tags.Internal_Tag should return the tag of a type, if one exists, whose innermost master is a master of the point of the function call.. See 3.9(26.1/3). 13/2 • A real static expression with a nonformal type that is not part of a larger static expression should be rounded the same as the target system. See 4.9(38.1/2). 14/2 15/2 • The value of Duration'Small should be no greater than 100 microseconds. See 9.6(30). • The time base for delay_relative_statements should be monotonic. See 9.6(31). M.2 Implementation-Defined Characteristics 13 December 2012 794 Ada Reference Manual — 2012 Edition • Leap seconds should be supported if the target system supports them. Otherwise, operations in Calendar.Formatting should return results consistent with no leap seconds. See 9.6.1(89/2). • When applied to a generic unit, a program unit pragma that is not a library unit pragma should apply to each instance of the generic unit for which there is not an overriding pragma applied directly to the instance. See 10.1.5(10/1). • A type declared in a preelaborated package should have the same representation in every elaboration of a given version of the package. See 10.2.1(12). • Exception_Information should provide information useful for debugging, and should include the Exception_Name and Exception_Message. See 11.4.1(19). • Exception_Message by default should be short, provide information useful for debugging, and should not include the Exception_Name. See 11.4.1(19). • Code executed for checks that have been suppressed should be minimized. See 11.5(28). • The recommended level of support for all representation items should be followed. See 13.1(28/3). • Storage allocated to objects of a packed type should be minimized. See 13.2(6). • The recommended level of support for the Pack aspect should be followed. See 13.2(9). • For an array X, X'Address should point at the first component of the array rather than the array bounds. See 13.3(14). • The recommended level of support for the Address attribute should be followed. See 13.3(19). • For any tagged specific subtype S, S'Class'Alignment should equal S'Alignment. See 13.3(28). • The recommended level of support for the Alignment attribute should be followed. See 13.3(35). • The Size of an array object should not include its bounds. See 13.3(41.1/2). • If the Size of a subtype allows for efficient independent addressability, then the Size of most objects of the subtype should equal the Size of the subtype. See 13.3(52). • A Size clause on a composite subtype should not affect the internal layout of components. See 13.3(53). • The recommended level of support for the Size attribute should be followed. See 13.3(56). • The recommended level of support for the Component_Size attribute should be followed. See 13.3(73). • The recommended level of support for enumeration_representation_clauses should be followed. See 13.4(10). • The recommended level of support for record_representation_clauses should be followed. See 13.5.1(22). • If a component is represented using a pointer to the actual data of the component which is contiguous with the rest of the object, then the storage place attributes should reflect the place of the actual data. If a component is allocated discontiguously from the rest of the object, then a warning should be generated upon reference to one of its storage place attributes. See 13.5.2(5). • The recommended level of support for the nondefault bit ordering should be followed. See 13.5.3(8). • Type System.Address should be a private type. See 13.7(37). • Operations in System and its children should reflect the target environment; operations that do not make sense should raise Program_Error. See 13.7.1(16). 16/2 17/2 18/2 19/2 20/2 21/2 22/2 23/2 24/3 25/2 26/2 26.1/3 27/2 28/2 29/2 30/2 31/2 32/2 33/2 34/2 35/2 36/2 37/2 38/2 795 13 December 2012 Implementation Advice M.3 Ada Reference Manual — 2012 Edition 39/2 • Since the Size of an array object generally does not include its bounds, the bounds should not be part of the converted data in an instance of Unchecked_Conversion. See 13.9(14/2). 40/2 • There should not be unnecessary run-time checks on the result of an Unchecked_Conversion; the result should be returned by reference when possible. Restrictions on Unchecked_Conversions should be avoided. See 13.9(15). 41/2 • The recommended level of support for Unchecked_Conversion should be followed. See 13.9(17). 42/2 • Any cases in which heap storage is dynamically allocated other than as part of the evaluation of an allocator should be documented. See 13.11(23). 43/2 • A default storage pool for an access-to-constant type should not have overhead to support deallocation of individual objects. See 13.11(24). 44/2 • Usually, a storage pool for an access discriminant or access parameter should be created at the point of an allocator, and be reclaimed when the designated object becomes inaccessible. For other anonymous access types, the pool should be created at the point where the type is elaborated and need not support deallocation of individual objects. See 13.11(25). 45/2 • For a standard storage pool, an instance of Unchecked_Deallocation should actually reclaim the storage. See 13.11.2(17). 45.1/3 46/2 • A call on an instance of Unchecked_Deallocation with a nonnull access value should raise Program_Error if the actual access type of the instance is a type for which the Storage_Size has been specified to be zero or is defined by the language to be zero. See 13.11.2(17.1/3). • If not specified, the value of Stream_Size for an elementary type should be the number of bits that corresponds to the minimum number of stream elements required by the first subtype of the type, rounded up to the nearest factor or multiple of the word size that is also a multiple of the stream element size. See 13.13.2(1.6/2). 47/2 • The recommended level of support for the Stream_Size attribute should be followed. See 13.13.2(1.8/2). 48/2 49/2 • If an implementation provides additional named predefined integer types, then the names should end with “Integer”. If an implementation provides additional named predefined floating point types, then the names should end with “Float”. See A.1(52). • Implementation-defined operations on Wide_Character, Wide_String, Wide_Wide_Character, and Wide_Wide_String should be child units of Wide_Characters or Wide_Wide_Characters. See A.3.1(7/3). 49.1/3 • The string returned by Wide_Characters.Handling.Character_Set_Version should include either “10646:” or “Unicode”. See A.3.5(62). 50/2 • Bounded string objects should not be implemented by implicit pointers and dynamic allocation. See A.4.4(106). 51/2 • Strings.Hash should be good a hash function, returning a wide spread of values for different string values, and similar strings should rarely return the same value. See A.4.9(12/2). 51.1/3 • If an implementation supports other string encoding schemes, a child of Ada.Strings similar to UTF_Encoding should be defined. See A.4.11(107/3). 52/2 • Any storage associated with an object of type Generator of the random number packages should be reclaimed on exit from the scope of the object. See A.5.2(46). 53/2 • Each value of Initiator passed to Reset for the random number packages should initiate a distinct sequence of random numbers, or, if that is not possible, be at least a rapidly varying function of the initiator value. See A.5.2(47). M.3 Implementation Advice 13 December 2012 796 Ada Reference Manual — 2012 Edition • Get_Immediate should be implemented with unbuffered input; input should be available immediately; line-editing should be disabled. See A.10.7(23). • Package Directories.Information should be provided to retrieve other information about a file. See A.16(124/2). • Directories.Start_Search and Directories.Search should raise Name_Error for malformed patterns. See A.16(125). • Directories.Rename should be supported at least when both New_Name and Old_Name are simple names and New_Name does not identify an existing external file. See A.16(126/2). 54/2 55/2 56/3 57/2 • Directories.Hierarchical_File_Names should be provided for systems with hierarchical file 57.1/3 naming, and should not be provided on other systems. See A.16.1(36/3). • If the execution environment supports subprocesses, the current environment variables should be used to initialize the environment variables of a subprocess. See A.17(32/2). • Changes to the environment variables made outside the control of Environment_Variables should be reflected immediately. See A.17(33/2). • Containers.Hash_Type'Modulus should be at least 2**32. Containers.Count_Type'Last should be at least 2**31–1. See A.18.1(8/2). • The worst-case time complexity of Element for Containers.Vector should be O(log N). See A.18.2(256/2). • The worst-case time complexity of Append with Count = 1 when N is less than the capacity for Containers.Vector should be O(log N). See A.18.2(257/2). • The worst-case time complexity of Prepend with Count = 1 and Delete_First with Count=1 for Containers.Vectors should be O(N log N). See A.18.2(258/2). • The worst-case instance of Containers.Vectors.Generic_Sorting should be O(N**2), and the average time complexity should be better than O(N**2). See A.18.2(259/2). time complexity of a call on procedure Sort of an • Containers.Vectors.Generic_Sorting.Sort and Containers.Vectors.Generic_Sorting.Merge should minimize copying of elements. See A.18.2(260/2). • Containers.Vectors.Move should not copy elements, and should minimize copying of internal data structures. See A.18.2(261/2). • If an exception is propagated from a vector operation, no storage should be lost, nor any elements removed from a vector unless specified by the operation. See A.18.2(262/2). • The worst-case time complexity of Element, Insert with Count=1, and Delete with Count=1 for Containers.Doubly_Linked_Lists should be O(log N). See A.18.3(160/2). • A call on procedure Sort of an instance of Containers.Doubly_Linked_Lists.Generic_Sorting should have an average time complexity better than O(N**2) and worst case no worse than O(N**2). See A.18.3(161/2). • Containers.Doubly_Linked_Lists.Move should not copy elements, and should minimize copying of internal data structures. See A.18.3(162/2). • If an exception is propagated from a list operation, no storage should be lost, nor any elements removed from a list unless specified by the operation. See A.18.3(163/2). • Move for a map should not copy elements, and should minimize copying of internal data structures. See A.18.4(83/2). 797 13 December 2012 Implementation Advice M.3 58/2 59/2 60/2 61/2 62/2 63/2 64/2 65/2 66/2 67/2 68/2 69/2 70/2 71/2 72/2 Ada Reference Manual — 2012 Edition 73/2 • If an exception is propagated from a map operation, no storage should be lost, nor any elements removed from a map unless specified by the operation. See A.18.4(84/2). 74/2 75/2 • The average time complexity of Element, Insert, Include, Replace, Delete, Exclude and Find operations that take a key parameter for Containers.Hashed_Maps should be O(log N). The average time complexity of the subprograms of Containers.Hashed_Maps that take a cursor parameter of The Containers.Hashed_Maps.Reserve_Capacity should be O(N). See A.18.5(62/2). complexity average should O(1). time be • The worst-case time complexity of Element, Insert, Include, Replace, Delete, Exclude and Find operations that take a key parameter for Containers.Ordered_Maps should be O((log N)**2) or better. The worst-case time complexity of the subprograms of Containers.Ordered_Maps that take a cursor parameter should be O(1). See A.18.6(95/2). 76/2 • Move for sets should not copy elements, and should minimize copying of internal data structures. See A.18.7(104/2). 77/2 • If an exception is propagated from a set operation, no storage should be lost, nor any elements removed from a set unless specified by the operation. See A.18.7(105/2). 78/2 79/2 79.1/3 • The average time complexity of the Insert, Include, Replace, Delete, Exclude and Find operations of Containers.Hashed_Sets that take an element parameter should be O(log N). The average time complexity of the subprograms of Containers.Hashed_Sets that take a cursor parameter should be O(1). The average time complexity of Containers.Hashed_Sets.- Reserve_Capacity should be O(N). See A.18.8(88/2). • The worst-case time complexity of the Insert, Include, Replace, Delete, Exclude and Find operations of Containers.Ordered_Sets that take an element parameter should be O((log N)**2). The worst-case time complexity of the subprograms of Containers.Ordered_Sets that take a cursor parameter should be O(1). See A.18.9(116/2). • The worst-case time complexity of the Element, Parent, First_Child, Last_Child, Next_Sibling, of Previous_Sibling, Containers.Multiway_Trees should be O(log N). See A.18.10(231/3). Insert_Child operations Count=1, Delete with and 79.2/3 • Containers.Multiway_Trees.Move should not copy elements, and should minimize copying of internal data structures. See A.18.10(232/3). 79.3/3 • If an exception is propagated from a tree operation, no storage should be lost, nor any elements removed from a tree unless specified by the operation. See A.18.10(233/3). 79.4/3 • Containers.Indefinite_Holders.Move should not copy the element, and should minimize copying of internal data structures. See A.18.18(73/3). 79.5/3 • If an exception is propagated from a holder operation, no storage should be lost, nor should the element be removed from a holder container unless specified by the operation. See A.18.18(74/3). 79.6/3 • Bounded vector objects should be implemented without implicit pointers or dynamic allocation. See A.18.19(16/3). 79.7/3 • The implementation advice for procedure Move to minimize copying does not apply to bounded vectors. See A.18.19(17/3). 79.8/3 • Bounded list objects should be implemented without implicit pointers or dynamic allocation. See A.18.20(19/3). 79.9/3 • The implementation advice for procedure Move to minimize copying does not apply to bounded lists. See A.18.20(20/3). M.3 Implementation Advice 13 December 2012 798 Ada Reference Manual — 2012 Edition • Bounded hashed map objects should be implemented without implicit pointers or dynamic 79.10/3 allocation. See A.18.21(21/3). • The implementation advice for procedure Move to minimize copying does not apply to bounded 79.11/3 hashed maps. See A.18.21(22/3). • Bounded ordered map objects should be implemented without implicit pointers or dynamic 79.12/3 allocation. See A.18.22(18/3). • The implementation advice for procedure Move to minimize copying does not apply to bounded 79.13/3 ordered maps. See A.18.22(19/3). • Bounded hashed set objects should be implemented without implicit pointers or dynamic 79.14/3 allocation. See A.18.23(20/3). • The implementation advice for procedure Move to minimize copying does not apply to bounded 79.15/3 hashed sets. See A.18.23(21/3). • Bounded ordered set objects should be implemented without implicit pointers or dynamic 79.16/3 allocation. See A.18.24(17/3). • The implementation advice for procedure Move to minimize copying does not apply to bounded 79.17/3 ordered sets. See A.18.24(18/3). • Bounded tree objects should be implemented without implicit pointers or dynamic allocation. 79.18/3 See A.18.25(19/3). • The implementation advice for procedure Move to minimize copying does not apply to bounded 79.19/3 trees. See A.18.25(20/3). • Containers.Generic_Array_Sort and Containers.Generic_Constrained_Array_Sort should have an average time complexity better than O(N**2) and worst case no worse than O(N**2). See A.18.26(10/2). 80/2 • Containers.Generic_Array_Sort and Containers.Generic_Constrained_Array_Sort should 81/2 minimize copying of elements. See A.18.26(11/2). • Containers.Generic_Sort should have an average time complexity better than O(N**2) and worst case no worse than O(N**2). See A.18.26(12/3). • Containers.Generic_Sort should minimize calls to the generic formal Swap. See A.18.26(13/3). • Bounded queue objects should be implemented without implicit pointers or dynamic allocation. See A.18.29(13/3). • Bounded priority queue objects should be implemented without implicit pointers or dynamic allocation. See A.18.31(14/3). • If Export is supported for a language, the main program should be able to be written in that language. Subprograms named "adainit" and "adafinal" should be provided for elaboration and finalization of the environment task. See B.1(39/3). • Automatic elaboration of preelaborated packages should be provided when specifying the Export aspect as True is supported. See B.1(40/3). • For each supported convention L other than Intrinsic, specifying the aspects Import and Export should be supported for objects of L-compatible types and for subprograms, and aspect Convention should be supported for L-eligible types and for subprograms. See B.1(41/3). • If an interface to C, COBOL, or Fortran is provided, the corresponding package or packages described in Annex B, “Interface to Other Languages” should also be provided. See B.2(13/3). 81.1/3 81.2/3 81.3/3 81.4/3 82/3 83/3 84/3 85/2 799 13 December 2012 Implementation Advice M.3 Ada Reference Manual — 2012 Edition 86/2 • The constants nul, wide_nul, char16_nul, and char32_nul in package Interfaces.C should have a representation of zero. See B.3(62.5/3). 87/2 • If C interfacing is supported, the interface correspondences between Ada and C should be supported. See B.3(71). 88/2 • If COBOL interfacing is supported, the interface correspondences between Ada and COBOL should be supported. See B.4(98). 89/2 • If Fortran interfacing is supported, the interface correspondences between Ada and Fortran should be supported. See B.5(26). 90/2 • The machine code or intrinsics support should allow access to all operations normally available to assembly language programmers for the target environment. See C.1(3). 91/2 • Interface to assembler should be supported; the default assembler should be associated with the convention identifier Assembler. See C.1(4/3). 92/2 • If an entity is exported to assembly language, then the implementation should allocate it at an addressable location even if not otherwise referenced from the Ada code. A call to a machine code or assembler subprogram should be treated as if it could read or update every object that is specified as exported. See C.1(5). 93/2 • Little or no overhead should be associated with calling intrinsic and machine-code subprograms. See C.1(10). 94/2 • Intrinsic subprograms should be provided to access any machine operations that provide special capabilities or efficiency not normally available. See C.1(16). 95/2 96/2 97/2 98/2 • If the Ceiling_Locking policy is not in effect and the target system allows for finer-grained control of interrupt blocking, a means for the application to specify which interrupts are to be blocked during protected actions should be provided. See C.3(28/2). • Interrupt handlers should be called directly by the hardware. See C.3.1(20). • Violations of any implementation-defined restrictions on interrupt handlers should be detected before run time. See C.3.1(21). • If implementation-defined forms of interrupt handler procedures are supported, then for each such form of a handler, a type analogous to Parameterless_Handler should be specified in a child package of Interrupts, with the same operations as in the predefined package Interrupts. See C.3.2(25). 99/2 • Preelaborated packages should be implemented such that little or no code is executed at run time for the elaboration of entities. See C.4(14). 100/2 • If pragma Discard_Names applies to an entity, then the amount of storage used for storing names associated with that entity should be reduced. See C.5(8). 101/2 • A load or store of a volatile object whose size is a multiple of System.Storage_Unit and whose alignment is nonzero, should be implemented by accessing exactly the bits of the object and no others. See C.6(22/2). 102/2 • A load or store of an atomic object should be implemented by a single load or store instruction. See C.6(23/2). 103/2 • If the target domain requires deterministic memory use at run time, storage for task attributes should be pre-allocated statically and the number of attributes pre-allocated should be documented. See C.7.2(30). 104/2 • Finalization of task attributes and reclamation of associated storage should be performed as soon as possible after task termination. See C.7.2(30.1/2). M.3 Implementation Advice 13 December 2012 800 Ada Reference Manual — 2012 Edition • Names that end with “_Locking” should be used for implementation-defined locking policies. See D.3(17). • Names that end with “_Queuing” should be used for implementation-defined queuing policies. See D.4(16). • The abort_statement should not require the task executing the statement to block. See D.6(9). • On a multi-processor, the delay associated with aborting a task on another processor should be bounded. See D.6(10). • When feasible, specified restrictions should be used to produce a more efficient implementation. See D.7(21). • When appropriate, mechanisms to change the value of Tick should be provided. See D.8(47). • Calendar.Clock and Real_Time.Clock should be transformations of the same time base. See D.8(48). • The “best” time base which exists in the underlying system should be available to the application through Real_Time.Clock. See D.8(49). 105/2 106/2 107/2 108/2 109/2 110/2 111/2 112/2 • On a multiprocessor system, each processor should have a separate and disjoint ready queue. See 112.1/3 D.13(9). • When appropriate, implementations should provide configuration mechanisms to change the value of Execution_Time.CPU_Tick. See D.14(29/2). • For a timing event, the handler should be executed directly by the real-time clock interrupt mechanism. See D.15(25). • Each dispatching domain should have separate and disjoint ready queues. See D.16.1(31). • The PCS should allow for multiple tasks to call the RPC-receiver. See E.5(28). • The System.RPC.Write operation should raise Storage_Error if it runs out of space when writing an item. See E.5(29). • If COBOL (respectively, C) is supported in the target environment, then interfacing to COBOL (respectively, C) should be supported as specified in Annex B. See F(7/3). • Packed decimal should be used as the internal representation for objects of subtype S when S'Machine_Radix = 10. See F.1(2). • If Fortran (respectively, C) is supported in the target environment, then interfacing to Fortran (respectively, C) should be supported as specified in Annex B. See G(7/3). • Mixed real and complex operations (as well as pure-imaginary and complex operations) should not be performed by converting the real (resp. pure-imaginary) operand to complex. See G.1.1(56). • If Real'Signed_Zeros is True for Numerics.Generic_Complex_Types, a rational treatment of the signs of zero results and result components should be provided. See G.1.1(58). • If Complex_Types.Real'Signed_Zeros is True for Numerics.Generic_Complex_Elementary_- Functions, a rational treatment of the signs of zero results and result components should be provided. See G.1.2(49). • For elementary functions, the forward trigonometric functions without a Cycle parameter should not be implemented by calling the corresponding version with a Cycle parameter. Log without a Base parameter should not be implemented by calling Log with a Base parameter. See G.2.4(19). 113/2 114/2 114.1/3 115/2 116/2 117/2 118/2 119/2 120/2 121/3 122/3 123/2 801 13 December 2012 Implementation Advice M.3 Ada Reference Manual — 2012 Edition 124/2 125/2 • For complex arithmetic, the Compose_From_Polar function without a Cycle parameter should not be implemented by calling Compose_From_Polar with a Cycle parameter. See G.2.6(15). • Solve and Inverse for Numerics.Generic_Real_Arrays should be implemented using established techniques such as LU decomposition and the result should be refined by an iteration on the residuals. See G.3.1(88/3). 126/2 • The equality operator should be used to test that a matrix in Numerics.Generic_Real_Arrays is symmetric. See G.3.1(90/2). 126.1/3 127/2 • An implementation should minimize the circumstances under which the algorithm used for Numerics.Generic_Real_Arrays.Eigenvalues and Numerics.Generic_Real_Arrays.Eigensystem fails to converge. See G.3.1(91/3). • Solve and Inverse for Numerics.Generic_Complex_Arrays should be implemented using established techniques and the result should be refined by an iteration on the residuals. See G.3.2(158/3). 128/2 • The equality and negation operators should be used to test that a matrix is Hermitian. See G.3.2(160/2). 128.1/3 • An implementation should minimize the circumstances under which the algorithm used for and Numerics.Generic_Complex_Arrays.Eigenvalues Numerics.Generic_Complex_Arrays.Eigensystem fails to converge. See G.3.2(160.1/3). 129/2 • Mixed real and complex operations should not be performed by converting the real operand to complex. See G.3.2(161/2). 130/2 • The information produced by pragma Reviewable should be provided in both a human-readable and machine-readable form, and the latter form should be documented. See H.3.1(19). 131/2 • Object code listings should be provided both in a symbolic format and in a numeric format. See H.3.1(20). 132/3 • If the partition elaboration policy is Sequential and the Environment task becomes permanently blocked during elaboration, then the partition should be immediately terminated. See H.6(15/3). M.3 Implementation Advice 13 December 2012 802 Ada Reference Manual — 2012 Edition Annex N (informative) Glossary This Annex contains informal descriptions of some of the terms used in this International Standard. The index provides references to more formal definitions of all of the terms used in this International Standard. 1/2 Abstract type. An abstract type is a tagged type intended for use as an ancestor of other types, but which is not allowed to have objects of its own. 1.1/2 Access type. An access type has values that designate aliased objects. Access types correspond to “pointer types” or “reference types” in some other languages. Aliased. An aliased view of an object is one that can be designated by an access value. Objects allocated by allocators are aliased. Objects can also be explicitly declared as aliased with the reserved word aliased. The Access attribute can be used to create an access value designating an aliased object. 2 3 Ancestor. An ancestor of a type is the type itself or, in the case of a type derived from other types, its parent type or one of its progenitor types or one of their ancestors. Note that ancestor and descendant are inverse relationships. 3.1/2 Array type. An array type is a composite type whose components are all of the same type. Components are selected by indexing. 4 Aspect. An aspect is a specifiable property of an entity. An aspect may be specified by an aspect_specification on the declaration of the entity. Some aspects may be queried via attributes. Assertion. An assertion is a boolean expression that appears in any of the following: a pragma Assert, a predicate, a precondition, a postcondition, an invariant, a constraint, or a null exclusion. An assertion is expected to be True at run time at certain specified places. 4.1/3 4.2/3 Category (of types). A category of types is a set of types with one or more common properties, such as primitive operations. A category of types that is closed under derivation is also known as a class. 4.3/2 Character type. A character type is an enumeration type whose values include characters. Class (of types). A class is a set of types that is closed under derivation, which means that if a given type is in the class, then all types derived from that type are also in the class. The set of types of a class share common properties, such as their primitive operations. Compilation unit. The text of a program can be submitted to the compiler in one or more compilations. Each compilation is a succession of compilation_units. A compilation_unit contains either the declaration, the body, or a renaming of a program unit. Composite type. A composite type may have components. Construct. A construct is a piece of text (explicit or implicit) that is an instance of a syntactic category defined under “Syntax”. 5 6/2 7 8/2 9 Container. A container is an object that contain other objects all of the same type, which could be class- wide. Several predefined container types are provided by the children of package Ada.Containers (see A.18.1). 9.1/3 803 13 December 2012 Glossary Annex N Ada Reference Manual — 2012 Edition 10 11 Controlled type. A controlled type supports user-defined assignment and finalization. Objects are always finalized before being destroyed. Declaration. A declaration is a language construct that associates a name with (a view of) an entity. A declaration may appear explicitly in the program text (an explicit declaration), or may be supposed to occur at a given place in the text as a consequence of the semantics of another construct (an implicit declaration). 12/2 This paragraph was deleted. 13/2 Derived type. A derived type is a type defined in terms of one or more other types given in a derived type definition. The first of those types is the parent type of the derived type and any others are progenitor types. Each class containing the parent type or a progenitor type also contains the derived type. The derived type inherits properties such as components and primitive operations from the parent and progenitors. A type together with the types derived from it (directly or indirectly) form a derivation class. 13.1/2 Descendant. A type is a descendant of itself, its parent and progenitor types, and their ancestors. Note that descendant and ancestor are inverse relationships. 14 15/2 Discrete type. A discrete type is either an integer type or an enumeration type. Discrete types may be used, for example, in case_statements and as array indices. Discriminant. A discriminant is a parameter for a composite type. It can control, for example, the bounds of a component of the type if the component is an array. A discriminant for a task type can be used to pass data to a task of the type upon creation. 15.1/2 Elaboration. The process by which a declaration achieves its run-time effect is called elaboration. Elaboration is one of the forms of execution. 16 17 Elementary type. An elementary type does not have components. Enumeration type. An enumeration type is defined by an enumeration of its values, which may be named by identifiers or character literals. 17.1/2 Evaluation. The process by which an expression achieves its run-time effect is called evaluation. Evaluation is one of the forms of execution. 18 Exception. An exception represents a kind of exceptional situation; an occurrence of such a situation (at run time) is called an exception occurrence. To raise an exception is to abandon normal program execution so as to draw attention to the fact that the corresponding situation has arisen. Performing some actions in response to the arising of an exception is called handling the exception. 19 Execution. The process by which a construct achieves its run-time effect is called execution. Execution of a declaration is also called elaboration. Execution of an expression is also called evaluation. 19.1/2 Function. A function is a form of subprogram that returns a result and can be called as part of an expression. 20 Generic unit. A generic unit is a template for a (nongeneric) program unit; the template can be parameterized by objects, types, subprograms, and packages. An instance of a generic unit is created by a generic_instantiation. The rules of the language are enforced when a generic unit is compiled, using a generic contract model; additional checks are performed upon instantiation to verify the contract is met. That is, the declaration of a generic unit represents a contract between the body of the generic and instances of the generic. Generic units can be used to perform the role that macros sometimes play in other languages. Annex N Glossary 13 December 2012 804 Ada Reference Manual — 2012 Edition Incomplete type. An incomplete type gives a view of a type that reveals only some of its properties. The remaining properties are provided by the full view given elsewhere. Incomplete types can be used for defining recursive data structures. 20.1/2 Indexable container type. An indexable container type is one that has user-defined behavior for indexing, via the Constant_Indexing or Variable_Indexing aspects. 20.2/3 Integer type. Integer types comprise the signed integer types and the modular types. A signed integer type has a base range that includes both positive and negative numbers, and has operations that may raise an exception when the result is outside the base range. A modular type has a base range whose lower bound is zero, and has operations with “wraparound” semantics. Modular types subsume what are called “unsigned types” in some other languages. 21 Interface type. An interface type is a form of abstract tagged type which has no components or concrete operations except possibly null procedures. Interface types are used for composing other interfaces and tagged types and thereby provide multiple inheritance. Only an interface type can be used as a progenitor of another type. 21.1/2 Invariant. A invariant is an assertion that is expected to be True for all objects of a given private type when viewed from outside the defining package. 21.2/3 Iterable container type. An iterable container type is one that has user-defined behavior for iteration, via the Default_Iterator and Iterator_Element aspects. 21.3/3 Iterator. An iterator is a construct that is used to loop over the elements of an array or container. Iterators may be user defined, and may perform arbitrary computations to access elements from a container. 21.4/3 Library unit. A library unit is a separately compiled program unit, and is always a package, subprogram, or generic unit. Library units may have other (logically nested) library units as children, and may have other program units physically nested within them. A root library unit, together with its children and grandchildren and so on, form a subsystem. Limited type. A limited type is a type for which copying (such as in an assignment_statement) is not allowed. A nonlimited type is a type for which copying is allowed. Object. An object is either a constant or a variable. An object contains a value. An object is created by an object_declaration or by an allocator. A formal parameter is (a view of) an object. A subcomponent of an object is an object. 22 23/2 24 Overriding operation. An overriding operation is one that replaces an inherited primitive operation. Operations may be marked explicitly as overriding or not overriding. 24.1/2 Package. Packages are program units that allow the specification of groups of logically related entities. Typically, a package contains the declaration of a type (often a private type or private extension) along with the declarations of primitive subprograms of the type, which can be called from outside the package, while their inner workings remain hidden from outside users. 25 Parent. The parent of a derived type is the first type given in the definition of the derived type. The parent can be almost any kind of type, including an interface type. 25.1/2 Partition. A partition is a part of a program. Each partition consists of a set of library units. Each partition may run in a separate address space, possibly on a separate computer. A program may contain just one partition. A distributed program typically contains multiple partitions, which can execute concurrently. 26 805 13 December 2012 Glossary Annex N Ada Reference Manual — 2012 Edition 26.1/3 Postcondition. A postcondition is an assertion that is expected to be True when a given subprogram returns normally. 27 Pragma. A pragma is a compiler directive. There are language-defined pragmas that give instructions for optimization, listing control, etc. An implementation may support additional (implementation-defined) pragmas. 27.1/3 Precondition. A precondition is an assertion that is expected to be True when a given subprogram is called. 27.2/3 Predicate. A predicate is an assertion that is expected to be True for all objects of a given subtype. 28 29/2 30/2 Primitive operations. The primitive operations of a type are the operations (such as subprograms) declared together with the type declaration. They are inherited by other types in the same class of types. For a tagged type, the primitive subprograms are dispatching subprograms, providing run-time polymorphism. A dispatching subprogram may be called with statically tagged operands, in which case the subprogram body invoked is determined at compile time. Alternatively, a dispatching subprogram may be called using a dispatching call, in which case the subprogram body invoked is determined at run time. Private extension. A private extension is a type that extends another type, with the additional properties hidden from its clients. Private type. A private type gives a view of a type that reveals only some of its properties. The remaining properties are provided by the full view given elsewhere. Private types can be used for defining abstractions that hide unnecessary details from their clients. 30.1/2 Procedure. A procedure is a form of subprogram that does not return a result and can only be called by a statement. 30.2/2 Progenitor. A progenitor of a derived type is one of the types given in the definition of the derived type other than the first. A progenitor is always an interface type. Interfaces, tasks, and protected types may also have progenitors. 31 32 Program. A program is a set of partitions, each of which may execute in a separate address space, possibly on a separate computer. A partition consists of a set of library units. Program unit. A program unit is either a package, a task unit, a protected unit, a protected entry, a generic unit, or an explicitly declared subprogram other than an enumeration literal. Certain kinds of program units can be separately compiled. Alternatively, they can appear physically nested within other program units. 33/2 Protected type. A protected type is a composite type whose components are accessible only through one of its protected operations which synchronize concurrent access by multiple tasks. 34 35 36 Real type. A real type has values that are approximations of the real numbers. Floating point and fixed point types are real types. Record extension. A record extension is a type that extends another type by adding additional components. Record type. A record type is a composite type consisting of zero or more named components, possibly of different types. 36.1/3 Reference type. A reference type is one that has user-defined behavior for “.all”, defined by the Implicit_Dereference aspect. Annex N Glossary 13 December 2012 806 Ada Reference Manual — 2012 Edition Renaming. A renaming_declaration is a declaration that does not define a new entity, but instead defines a view of an existing entity. 36.2/2 Scalar type. A scalar type is either a discrete type or a real type. Storage pool. Each access-to-object type has an associated storage pool object. The storage for an object created by an allocator comes from the storage pool of the type of the allocator. Some storage pools may be partitioned into subpools in order to support finer-grained storage management. 37 37.1/3 Stream. A stream is a sequence of elements that can be used, along with the stream-oriented attributes, to support marshalling and unmarshalling of values of most types. 37.2/3 Subprogram. A subprogram is a section of a program that can be executed in various contexts. It is invoked by a subprogram call that may qualify the effect of the subprogram through the passing of parameters. There are two forms of subprograms: functions, which return values, and procedures, which do not. 37.3/2 Subtype. A subtype is a type together with optional constraints, null exclusions, and predicates, which constrain the values of the subtype to satisfy certain conditions. The values of a subtype are a subset of the values of its type. 38/3 Synchronized. A synchronized entity is one that will work safely with multiple tasks at one time. A synchronized interface can be an ancestor of a task or a protected type. Such a task or protected type is called a synchronized tagged type. 38.1/2 Tagged type. The objects of a tagged type have a run-time type tag, which indicates the specific type with which the object was originally created. An operand of a class-wide tagged type can be used in a dispatching call; the tag indicates which subprogram body to invoke. Nondispatching calls, in which the subprogram body to invoke is determined at compile time, are also allowed. Tagged types may be extended with additional components. Task type. A task type is a composite type used to represent active entities which execute concurrently and which can communicate via queued task entries. The top-level task of a partition is called the environment task. Type. Each object has a type. A type has an associated set of values, and a set of primitive operations which implement the fundamental aspects of its semantics. Types are grouped into categories. Most language-defined categories of types are also classes of types. 39 40/2 41/2 View. A view of an entity reveals some or all of the properties of the entity. A single entity may have multiple views. 42/2 807 13 December 2012 Glossary Annex N Ada Reference Manual — 2012 Edition Annex P (informative) Syntax Summary This Annex summarizes the complete syntax of the language. See 1.1.4 for a description of the notation used. 2.3: identifier ::= identifier_start {identifier_start | identifier_extend} 2.3: identifier_start ::= letter_uppercase | letter_lowercase | letter_titlecase | letter_modifier | letter_other | number_letter 2.3: identifier_extend ::= mark_non_spacing | mark_spacing_combining | number_decimal | punctuation_connector 2.4: numeric_literal ::= decimal_literal | based_literal 2.4.1: decimal_literal ::= numeral [.numeral] [exponent] 2.4.1: numeral ::= digit {[underline] digit} 2.4.1: exponent ::= E [+] numeral | E – numeral 2.4.1: digit ::= 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 2.4.2: based_literal ::= base # based_numeral [.based_numeral] # [exponent] 2.4.2: base ::= numeral 2.4.2: based_numeral ::= extended_digit {[underline] extended_digit} 2.4.2: extended_digit ::= digit | A | B | C | D | E | F 2.5: character_literal ::= 'graphic_character' 2.6: string_literal ::= "{string_element}" 2.6: string_element ::= "" | non_quotation_mark_graphic_character 809 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition 2.7: comment ::= --{non_end_of_line_character} 2.8: pragma ::= pragma identifier [(pragma_argument_association {, pragma_argument_association})]; 2.8: pragma_argument_association ::= [pragma_argument_identifier =>] name | [pragma_argument_identifier =>] expression | pragma_argument_aspect_mark => name | pragma_argument_aspect_mark => expression 3.1: basic_declaration ::= type_declaration | object_declaration | subprogram_declaration | null_procedure_declaration | package_declaration | exception_declaration | generic_instantiation 3.1: defining_identifier ::= identifier | subtype_declaration | number_declaration | abstract_subprogram_declaration | expression_function_declaration | renaming_declaration | generic_declaration 3.2.1: type_declaration ::= full_type_declaration | incomplete_type_declaration | private_type_declaration | private_extension_declaration 3.2.1: full_type_declaration ::= type defining_identifier [known_discriminant_part] is type_definition [aspect_specification]; | task_type_declaration | protected_type_declaration 3.2.1: type_definition ::= enumeration_type_definition | real_type_definition | record_type_definition | derived_type_definition | integer_type_definition | array_type_definition | access_type_definition | interface_type_definition 3.2.2: subtype_declaration ::= subtype defining_identifier is subtype_indication [aspect_specification]; 3.2.2: subtype_indication ::= [null_exclusion] subtype_mark [constraint] 3.2.2: subtype_mark ::= subtype_name 3.2.2: constraint ::= scalar_constraint | composite_constraint 3.2.2: scalar_constraint ::= range_constraint | digits_constraint | delta_constraint 3.2.2: Annex P Syntax Summary 13 December 2012 810 Ada Reference Manual — 2012 Edition composite_constraint ::= index_constraint | discriminant_constraint 3.3.1: object_declaration ::= defining_identifier_list : [aliased] [constant] subtype_indication [:= expression] [aspect_specification]; | defining_identifier_list : [aliased] [constant] access_definition [:= expression] [aspect_specification]; | defining_identifier_list : [aliased] [constant] array_type_definition [:= expression] [aspect_specification]; | single_task_declaration | single_protected_declaration 3.3.1: defining_identifier_list ::= defining_identifier {, defining_identifier} 3.3.2: number_declaration ::= defining_identifier_list : constant := static_expression; 3.4: derived_type_definition ::= [abstract] [limited] new parent_subtype_indication [[and interface_list] record_extension_part] 3.5: range_constraint ::= range range 3.5: range ::= range_attribute_reference | simple_expression .. simple_expression 3.5.1: enumeration_type_definition ::= (enumeration_literal_specification {, enumeration_literal_specification}) 3.5.1: enumeration_literal_specification ::= defining_identifier | defining_character_literal 3.5.1: defining_character_literal ::= character_literal 3.5.4: integer_type_definition ::= signed_integer_type_definition | modular_type_definition 3.5.4: signed_integer_type_definition ::= range static_simple_expression .. static_simple_expression 3.5.4: modular_type_definition ::= mod static_expression 3.5.6: real_type_definition ::= floating_point_definition | fixed_point_definition 3.5.7: floating_point_definition ::= digits static_expression [real_range_specification] 3.5.7: real_range_specification ::= range static_simple_expression .. static_simple_expression 3.5.9: fixed_point_definition ::= ordinary_fixed_point_definition | decimal_fixed_point_definition 3.5.9: 811 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition ordinary_fixed_point_definition ::= delta static_expression real_range_specification 3.5.9: decimal_fixed_point_definition ::= delta static_expression digits static_expression [real_range_specification] 3.5.9: digits_constraint ::= digits static_expression [range_constraint] 3.6: array_type_definition ::= unconstrained_array_definition | constrained_array_definition 3.6: unconstrained_array_definition ::= array(index_subtype_definition {, index_subtype_definition}) of component_definition 3.6: index_subtype_definition ::= subtype_mark range <> 3.6: constrained_array_definition ::= array (discrete_subtype_definition {, discrete_subtype_definition}) of component_definition 3.6: discrete_subtype_definition ::= discrete_subtype_indication | range 3.6: component_definition ::= [aliased] subtype_indication | [aliased] access_definition 3.6.1: index_constraint ::= (discrete_range {, discrete_range}) 3.6.1: discrete_range ::= discrete_subtype_indication | range 3.7: discriminant_part ::= unknown_discriminant_part | known_discriminant_part 3.7: unknown_discriminant_part ::= (<>) 3.7: known_discriminant_part ::= (discriminant_specification {; discriminant_specification}) 3.7: discriminant_specification ::= defining_identifier_list : [null_exclusion] subtype_mark [:= default_expression] | defining_identifier_list : access_definition [:= default_expression] 3.7: default_expression ::= expression 3.7.1: discriminant_constraint ::= (discriminant_association {, discriminant_association}) 3.7.1: discriminant_association ::= [discriminant_selector_name {| discriminant_selector_name} =>] expression 3.8: record_type_definition ::= [[abstract] tagged] [limited] record_definition Annex P Syntax Summary 13 December 2012 812 Ada Reference Manual — 2012 Edition 3.8: record_definition ::= record component_list end record | null record 3.8: component_list ::= component_item {component_item} | {component_item} variant_part | null; 3.8: component_item ::= component_declaration | aspect_clause 3.8: component_declaration ::= defining_identifier_list : component_definition [:= default_expression] [aspect_specification]; 3.8.1: variant_part ::= case discriminant_direct_name is variant {variant} end case; 3.8.1: variant ::= when discrete_choice_list => component_list 3.8.1: discrete_choice_list ::= discrete_choice {| discrete_choice} 3.8.1: discrete_choice ::= choice_expression | discrete_subtype_indication | range | others 3.9.1: record_extension_part ::= with record_definition 3.9.3: abstract_subprogram_declaration ::= [overriding_indicator] subprogram_specification is abstract [aspect_specification]; 3.9.4: interface_type_definition ::= [limited | task | protected | synchronized] interface [and interface_list] 3.9.4: interface_list ::= interface_subtype_mark {and interface_subtype_mark} 3.10: access_type_definition ::= [null_exclusion] access_to_object_definition | [null_exclusion] access_to_subprogram_definition 3.10: access_to_object_definition ::= access [general_access_modifier] subtype_indication 3.10: general_access_modifier ::= all | constant 813 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition 3.10: access_to_subprogram_definition ::= access [protected] procedure parameter_profile | access [protected] function parameter_and_result_profile 3.10: null_exclusion ::= not null 3.10: access_definition ::= [null_exclusion] access [constant] subtype_mark | [null_exclusion] access [protected] procedure parameter_profile | [null_exclusion] access [protected] function parameter_and_result_profile 3.10.1: incomplete_type_declaration ::= type defining_identifier [discriminant_part] [is tagged]; 3.11: declarative_part ::= {declarative_item} 3.11: declarative_item ::= basic_declarative_item | body 3.11: basic_declarative_item ::= basic_declaration | aspect_clause | use_clause 3.11: body ::= proper_body | body_stub 3.11: proper_body ::= subprogram_body | package_body | task_body | protected_body 4.1: name ::= | explicit_dereference direct_name | slice | indexed_component | attribute_reference | selected_component | function_call | type_conversion | qualified_expression | character_literal | generalized_reference | generalized_indexing 4.1: direct_name ::= identifier | operator_symbol 4.1: prefix ::= name | implicit_dereference 4.1: explicit_dereference ::= name.all 4.1: implicit_dereference ::= name 4.1.1: indexed_component ::= prefix(expression {, expression}) 4.1.2: slice ::= prefix(discrete_range) 4.1.3: selected_component ::= prefix . selector_name 4.1.3: selector_name ::= identifier | character_literal | operator_symbol 4.1.4: Annex P Syntax Summary 13 December 2012 814 Ada Reference Manual — 2012 Edition attribute_reference ::= prefix'attribute_designator 4.1.4: attribute_designator ::= identifier[(static_expression)] | Access | Delta | Digits | Mod 4.1.4: range_attribute_reference ::= prefix'range_attribute_designator 4.1.4: range_attribute_designator ::= Range[(static_expression)] 4.1.5: generalized_reference ::= reference_object_name 4.1.6: generalized_indexing ::= indexable_container_object_prefix actual_parameter_part 4.3: aggregate ::= record_aggregate | extension_aggregate | array_aggregate 4.3.1: record_aggregate ::= (record_component_association_list) 4.3.1: record_component_association_list ::= record_component_association {, record_component_association} | null record 4.3.1: record_component_association ::= [component_choice_list =>] expression | component_choice_list => <> 4.3.1: component_choice_list ::= component_selector_name {| component_selector_name} | others 4.3.2: extension_aggregate ::= (ancestor_part with record_component_association_list) 4.3.2: ancestor_part ::= expression | subtype_mark 4.3.3: array_aggregate ::= positional_array_aggregate | named_array_aggregate 4.3.3: positional_array_aggregate ::= (expression, expression {, expression}) | (expression {, expression}, others => expression) | (expression {, expression}, others => <>) 4.3.3: named_array_aggregate ::= (array_component_association {, array_component_association}) 4.3.3: array_component_association ::= discrete_choice_list => expression | discrete_choice_list => <> 4.4: expression ::= 815 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition relation {and relation} | relation {or relation} | relation {xor relation} | relation {and then relation} | relation {or else relation} 4.4: choice_expression ::= choice_relation {and choice_relation} | choice_relation {or choice_relation} | choice_relation {xor choice_relation} | choice_relation {and then choice_relation} | choice_relation {or else choice_relation} 4.4: choice_relation ::= simple_expression [relational_operator simple_expression] 4.4: relation ::= simple_expression [relational_operator simple_expression] | simple_expression [not] in membership_choice_list 4.4: membership_choice_list ::= membership_choice {| membership_choice} 4.4: membership_choice ::= choice_expression | range | subtype_mark 4.4: simple_expression ::= [unary_adding_operator] term {binary_adding_operator term} 4.4: term ::= factor {multiplying_operator factor} 4.4: factor ::= primary [** primary] | abs primary | not primary 4.4: primary ::= numeric_literal | null | string_literal | aggregate | name | allocator | (expression) | (conditional_expression) | (quantified_expression) 4.5: logical_operator ::= 4.5: relational_operator ::= 4.5: binary_adding_operator ::= 4.5: unary_adding_operator ::= 4.5: multiplying_operator ::= and | or | xor = | /= | < | <= | > | >= + | – | & + | – * | / | mod | rem 4.5: highest_precedence_operator ::= ** | abs | not 4.5.7: conditional_expression ::= if_expression | case_expression 4.5.7: if_expression ::= if condition then dependent_expression {elsif condition then dependent_expression} [else dependent_expression] Annex P Syntax Summary 13 December 2012 816 Ada Reference Manual — 2012 Edition 4.5.7: condition ::= boolean_expression 4.5.7: case_expression ::= case selecting_expression is case_expression_alternative {, case_expression_alternative} 4.5.7: case_expression_alternative ::= when discrete_choice_list => dependent_expression 4.5.8: quantified_expression ::= for quantifier loop_parameter_specification => predicate | for quantifier iterator_specification => predicate 4.5.8: quantifier ::= all | some 4.5.8: predicate ::= boolean_expression 4.6: type_conversion ::= subtype_mark(expression) | subtype_mark(name) 4.7: qualified_expression ::= subtype_mark'(expression) | subtype_mark'aggregate 4.8: allocator ::= new [subpool_specification] subtype_indication | new [subpool_specification] qualified_expression 4.8: subpool_specification ::= (subpool_handle_name) 5.1: sequence_of_statements ::= statement {statement} {label} 5.1: statement ::= {label} simple_statement | {label} compound_statement 5.1: simple_statement ::= null_statement | assignment_statement | goto_statement | simple_return_statement | requeue_statement | abort_statement | code_statement 5.1: compound_statement ::= if_statement | loop_statement | extended_return_statement | accept_statement 5.1: null_statement ::= null; | exit_statement | procedure_call_statement | entry_call_statement | delay_statement | raise_statement | case_statement | block_statement | select_statement 817 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition 5.1: label ::= <> 5.1: statement_identifier ::= direct_name 5.2: assignment_statement ::= variable_name := expression; 5.3: if_statement ::= if condition then sequence_of_statements {elsif condition then sequence_of_statements} [else sequence_of_statements] end if; 5.4: case_statement ::= case selecting_expression is case_statement_alternative {case_statement_alternative} end case; 5.4: case_statement_alternative ::= when discrete_choice_list => sequence_of_statements 5.5: loop_statement ::= [loop_statement_identifier:] [iteration_scheme] loop sequence_of_statements end loop [loop_identifier]; 5.5: iteration_scheme ::= while condition | for loop_parameter_specification | for iterator_specification 5.5: loop_parameter_specification ::= defining_identifier in [reverse] discrete_subtype_definition 5.5.2: iterator_specification ::= defining_identifier in [reverse] iterator_name | defining_identifier [: subtype_indication] of [reverse] iterable_name 5.6: block_statement ::= [block_statement_identifier:] [declare declarative_part] begin handled_sequence_of_statements end [block_identifier]; 5.7: exit_statement ::= exit [loop_name] [when condition]; Annex P Syntax Summary 13 December 2012 818 Ada Reference Manual — 2012 Edition 5.8: goto_statement ::= goto label_name; 6.1: subprogram_declaration ::= [overriding_indicator] subprogram_specification [aspect_specification]; 6.1: subprogram_specification ::= procedure_specification | function_specification 6.1: procedure_specification ::= procedure defining_program_unit_name parameter_profile 6.1: function_specification ::= function defining_designator parameter_and_result_profile 6.1: designator ::= [parent_unit_name . ]identifier | operator_symbol 6.1: defining_designator ::= defining_program_unit_name | defining_operator_symbol 6.1: defining_program_unit_name ::= [parent_unit_name . ]defining_identifier 6.1: operator_symbol ::= string_literal 6.1: defining_operator_symbol ::= operator_symbol 6.1: parameter_profile ::= [formal_part] 6.1: parameter_and_result_profile ::= [formal_part] return [null_exclusion] subtype_mark | [formal_part] return access_definition 6.1: formal_part ::= (parameter_specification {; parameter_specification}) 6.1: parameter_specification ::= defining_identifier_list : [aliased] mode [null_exclusion] subtype_mark [:= default_expression] | defining_identifier_list : access_definition [:= default_expression] 6.1: mode ::= [in] | in out | out 6.3: subprogram_body ::= [overriding_indicator] subprogram_specification [aspect_specification] is declarative_part begin handled_sequence_of_statements end [designator]; 6.4: procedure_call_statement ::= procedure_name; 819 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition | procedure_prefix actual_parameter_part; 6.4: function_call ::= function_name | function_prefix actual_parameter_part 6.4: actual_parameter_part ::= (parameter_association {, parameter_association}) 6.4: parameter_association ::= [formal_parameter_selector_name =>] explicit_actual_parameter 6.4: explicit_actual_parameter ::= expression | variable_name 6.5: simple_return_statement ::= return [expression]; 6.5: extended_return_object_declaration ::= defining_identifier : [aliased][constant] return_subtype_indication [:= expression] 6.5: extended_return_statement ::= return extended_return_object_declaration [do handled_sequence_of_statements end return]; 6.5: return_subtype_indication ::= subtype_indication | access_definition 6.7: null_procedure_declaration ::= [overriding_indicator] procedure_specification is null [aspect_specification]; 6.8: expression_function_declaration ::= [overriding_indicator] function_specification is (expression) [aspect_specification]; 7.1: package_declaration ::= package_specification; 7.1: package_specification ::= package defining_program_unit_name [aspect_specification] is {basic_declarative_item} [private {basic_declarative_item}] end [[parent_unit_name.]identifier] 7.2: package_body ::= package body defining_program_unit_name [aspect_specification] is declarative_part [begin handled_sequence_of_statements] Annex P Syntax Summary 13 December 2012 820 Ada Reference Manual — 2012 Edition end [[parent_unit_name.]identifier]; 7.3: private_type_declaration ::= type defining_identifier [discriminant_part] is [[abstract] tagged] [limited] private [aspect_specification]; 7.3: private_extension_declaration ::= type defining_identifier [discriminant_part] is [abstract] [limited | synchronized] new ancestor_subtype_indication [and interface_list] with private [aspect_specification]; 8.3.1: overriding_indicator ::= [not] overriding 8.4: use_clause ::= use_package_clause | use_type_clause 8.4: use_package_clause ::= use package_name {, package_name}; 8.4: use_type_clause ::= use [all] type subtype_mark {, subtype_mark}; 8.5: renaming_declaration ::= object_renaming_declaration | exception_renaming_declaration | package_renaming_declaration | subprogram_renaming_declaration | generic_renaming_declaration 8.5.1: object_renaming_declaration ::= defining_identifier : [null_exclusion] subtype_mark renames object_name [aspect_specification]; | defining_identifier : access_definition renames object_name [aspect_specification]; 8.5.2: exception_renaming_declaration ::= defining_identifier : exception renames exception_name [aspect_specification]; 8.5.3: package_renaming_declaration ::= package defining_program_unit_name renames package_name [aspect_specification]; 8.5.4: subprogram_renaming_declaration ::= [overriding_indicator] subprogram_specification renames callable_entity_name [aspect_specification]; 8.5.5: generic_renaming_declaration ::= generic package [aspect_specification]; | generic procedure [aspect_specification]; | generic function [aspect_specification]; defining_program_unit_name renames generic_package_name defining_program_unit_name renames generic_procedure_name defining_program_unit_name renames generic_function_name 9.1: task_type_declaration ::= 821 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition task type defining_identifier [known_discriminant_part] [aspect_specification] [is [new interface_list with] task_definition]; 9.1: single_task_declaration ::= task defining_identifier [aspect_specification][is [new interface_list with] task_definition]; 9.1: task_definition ::= {task_item} [ private {task_item}] end [task_identifier] 9.1: task_item ::= entry_declaration | aspect_clause 9.1: task_body ::= task body defining_identifier [aspect_specification] is declarative_part begin handled_sequence_of_statements end [task_identifier]; 9.4: protected_type_declaration ::= protected type defining_identifier [known_discriminant_part] [aspect_specification] is [new interface_list with] protected_definition; 9.4: single_protected_declaration ::= protected defining_identifier [aspect_specification] is [new interface_list with] protected_definition; 9.4: protected_definition ::= { protected_operation_declaration } [ private { protected_element_declaration } ] end [protected_identifier] 9.4: protected_operation_declaration ::= subprogram_declaration | entry_declaration | aspect_clause 9.4: protected_element_declaration ::= protected_operation_declaration | component_declaration 9.4: protected_body ::= protected body defining_identifier [aspect_specification] is Annex P Syntax Summary 13 December 2012 822 Ada Reference Manual — 2012 Edition { protected_operation_item } end [protected_identifier]; 9.4: protected_operation_item ::= subprogram_declaration | subprogram_body | entry_body | aspect_clause 9.5: synchronization_kind ::= By_Entry | By_Protected_Procedure | Optional 9.5.2: entry_declaration ::= [overriding_indicator] entry defining_identifier [(discrete_subtype_definition)] parameter_profile [aspect_specification]; 9.5.2: accept_statement ::= accept entry_direct_name [(entry_index)] parameter_profile [do handled_sequence_of_statements end [entry_identifier]]; 9.5.2: entry_index ::= expression 9.5.2: entry_body ::= entry defining_identifier entry_body_formal_part entry_barrier is declarative_part begin handled_sequence_of_statements end [entry_identifier]; 9.5.2: entry_body_formal_part ::= [(entry_index_specification)] parameter_profile 9.5.2: entry_barrier ::= when condition 9.5.2: entry_index_specification ::= for defining_identifier in discrete_subtype_definition 9.5.3: entry_call_statement ::= entry_name [actual_parameter_part]; 9.5.4: requeue_statement ::= requeue procedure_or_entry_name [with abort]; 9.6: delay_statement ::= delay_until_statement | delay_relative_statement 9.6: delay_until_statement ::= delay until delay_expression; 9.6: delay_relative_statement ::= delay delay_expression; 9.7: select_statement ::= selective_accept | timed_entry_call | conditional_entry_call | asynchronous_select 9.7.1: selective_accept ::= 823 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition select [guard] select_alternative { or [guard] select_alternative } [ else sequence_of_statements ] end select; 9.7.1: guard ::= when condition => 9.7.1: select_alternative ::= accept_alternative | delay_alternative | terminate_alternative 9.7.1: accept_alternative ::= accept_statement [sequence_of_statements] 9.7.1: delay_alternative ::= delay_statement [sequence_of_statements] 9.7.1: terminate_alternative ::= terminate; 9.7.2: timed_entry_call ::= select entry_call_alternative or delay_alternative end select; 9.7.2: entry_call_alternative ::= procedure_or_entry_call [sequence_of_statements] 9.7.2: procedure_or_entry_call ::= procedure_call_statement | entry_call_statement 9.7.3: conditional_entry_call ::= select entry_call_alternative else sequence_of_statements end select; 9.7.4: asynchronous_select ::= select triggering_alternative then abort abortable_part end select; 9.7.4: triggering_alternative ::= triggering_statement [sequence_of_statements] 9.7.4: Annex P Syntax Summary 13 December 2012 824 Ada Reference Manual — 2012 Edition triggering_statement ::= procedure_or_entry_call | delay_statement 9.7.4: abortable_part ::= sequence_of_statements 9.8: abort_statement ::= abort task_name {, task_name}; 10.1.1: compilation ::= {compilation_unit} 10.1.1: compilation_unit ::= context_clause library_item | context_clause subunit 10.1.1: library_item ::= [private] library_unit_declaration | library_unit_body | [private] library_unit_renaming_declaration 10.1.1: library_unit_declaration ::= subprogram_declaration | generic_declaration | package_declaration | generic_instantiation 10.1.1: library_unit_renaming_declaration ::= package_renaming_declaration | generic_renaming_declaration | subprogram_renaming_declaration 10.1.1: library_unit_body ::= subprogram_body | package_body 10.1.1: parent_unit_name ::= name 10.1.2: context_clause ::= {context_item} 10.1.2: context_item ::= with_clause | use_clause 10.1.2: with_clause ::= limited_with_clause | nonlimited_with_clause 10.1.2: limited_with_clause ::= limited [private] with library_unit_name {, library_unit_name}; 10.1.2: nonlimited_with_clause ::= [private] with library_unit_name {, library_unit_name}; 10.1.3: body_stub ::= subprogram_body_stub | package_body_stub | task_body_stub | protected_body_stub 10.1.3: subprogram_body_stub ::= [overriding_indicator] subprogram_specification is separate [aspect_specification]; 10.1.3: package_body_stub ::= package body defining_identifier is separate [aspect_specification]; 10.1.3: task_body_stub ::= 825 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition task body defining_identifier is separate [aspect_specification]; 10.1.3: protected_body_stub ::= protected body defining_identifier is separate [aspect_specification]; 10.1.3: subunit ::= separate (parent_unit_name) proper_body 11.1: exception_declaration ::= defining_identifier_list : exception [aspect_specification]; 11.2: handled_sequence_of_statements ::= sequence_of_statements [exception exception_handler {exception_handler}] 11.2: exception_handler ::= when [choice_parameter_specification:] exception_choice {| exception_choice} => sequence_of_statements 11.2: choice_parameter_specification ::= defining_identifier 11.2: exception_choice ::= exception_name | others 11.3: raise_statement ::= raise; | raise exception_name [with string_expression]; 12.1: generic_declaration ::= generic_subprogram_declaration | generic_package_declaration 12.1: generic_subprogram_declaration ::= generic_formal_part subprogram_specification [aspect_specification]; 12.1: generic_package_declaration ::= generic_formal_part package_specification; 12.1: generic_formal_part ::= generic {generic_formal_parameter_declaration | use_clause} 12.1: generic_formal_parameter_declaration ::= formal_object_declaration | formal_type_declaration | formal_subprogram_declaration | formal_package_declaration 12.3: generic_instantiation ::= package defining_program_unit_name is new generic_package_name [generic_actual_part] [aspect_specification]; | [overriding_indicator] procedure defining_program_unit_name is new generic_procedure_name [generic_actual_part] Annex P Syntax Summary 13 December 2012 826 Ada Reference Manual — 2012 Edition [aspect_specification]; | [overriding_indicator] function defining_designator is new generic_function_name [generic_actual_part] [aspect_specification]; 12.3: generic_actual_part ::= (generic_association {, generic_association}) 12.3: generic_association ::= [generic_formal_parameter_selector_name =>] explicit_generic_actual_parameter 12.3: explicit_generic_actual_parameter ::= expression | variable_name | subprogram_name | entry_name | subtype_mark | package_instance_name 12.4: formal_object_declaration ::= defining_identifier_list : mode [null_exclusion] subtype_mark [:= default_expression] [aspect_specification]; | defining_identifier_list : mode access_definition [:= default_expression] [aspect_specification]; 12.5: formal_type_declaration ::= formal_complete_type_declaration | formal_incomplete_type_declaration 12.5: formal_complete_type_declaration ::= type defining_identifier[discriminant_part] is formal_type_definition [aspect_specification]; 12.5: formal_incomplete_type_declaration ::= type defining_identifier[discriminant_part] [is tagged]; 12.5: formal_type_definition ::= formal_private_type_definition | formal_derived_type_definition | formal_discrete_type_definition | formal_signed_integer_type_definition | formal_modular_type_definition | formal_floating_point_definition | formal_ordinary_fixed_point_definition | formal_decimal_fixed_point_definition | formal_array_type_definition | formal_access_type_definition | formal_interface_type_definition 12.5.1: formal_private_type_definition ::= [[abstract] tagged] [limited] private 12.5.1: formal_derived_type_definition ::= [abstract] [limited | synchronized] new subtype_mark [[and interface_list]with private] 12.5.2: formal_discrete_type_definition ::= (<>) 12.5.2: formal_signed_integer_type_definition ::= range <> 827 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition 12.5.2: formal_modular_type_definition ::= mod <> 12.5.2: formal_floating_point_definition ::= digits <> 12.5.2: formal_ordinary_fixed_point_definition ::= delta <> 12.5.2: formal_decimal_fixed_point_definition ::= delta <> digits <> 12.5.3: formal_array_type_definition ::= array_type_definition 12.5.4: formal_access_type_definition ::= access_type_definition 12.5.5: formal_interface_type_definition ::= interface_type_definition 12.6: formal_subprogram_declaration ::= formal_concrete_subprogram_declaration | formal_abstract_subprogram_declaration 12.6: formal_concrete_subprogram_declaration ::= with subprogram_specification [is subprogram_default] [aspect_specification]; 12.6: formal_abstract_subprogram_declaration ::= with subprogram_specification is abstract [subprogram_default] [aspect_specification]; 12.6: subprogram_default ::= default_name | <> | null 12.6: default_name ::= name 12.7: formal_package_declaration ::= with package defining_identifier is new generic_package_name formal_package_actual_part [aspect_specification]; 12.7: formal_package_actual_part ::= ([others =>] <>) | [generic_actual_part] | (formal_package_association {, formal_package_association} [, others => <>]) 12.7: formal_package_association ::= generic_association | generic_formal_parameter_selector_name => <> 13.1: aspect_clause ::= attribute_definition_clause | enumeration_representation_clause | record_representation_clause | at_clause 13.1: local_name ::= direct_name | direct_name'attribute_designator | library_unit_name Annex P Syntax Summary 13 December 2012 828 Ada Reference Manual — 2012 Edition 13.1.1: aspect_specification ::= with aspect_mark [=> aspect_definition] {, aspect_mark [=> aspect_definition] } 13.1.1: aspect_mark ::= aspect_identifier['Class] 13.1.1: aspect_definition ::= name | expression | identifier 13.3: attribute_definition_clause ::= for local_name'attribute_designator use expression; | for local_name'attribute_designator use name; 13.4: enumeration_representation_clause ::= for first_subtype_local_name use enumeration_aggregate; 13.4: enumeration_aggregate ::= array_aggregate 13.5.1: record_representation_clause ::= for first_subtype_local_name use record [mod_clause] {component_clause} end record; 13.5.1: component_clause ::= component_local_name at position range first_bit .. last_bit; 13.5.1: position ::= static_expression 13.5.1: first_bit ::= static_simple_expression 13.5.1: last_bit ::= static_simple_expression 13.8: code_statement ::= qualified_expression; 13.11.3: storage_pool_indicator ::= storage_pool_name | null 13.12: restriction ::= restriction_identifier | restriction_parameter_identifier => restriction_parameter_argument 13.12: restriction_parameter_argument ::= name | expression J.3: delta_constraint ::= delta static_expression [range_constraint] J.7: at_clause ::= for direct_name use at expression; J.8: mod_clause ::= at mod static_expression; 829 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition Syntax Cross Reference 1/3 In the following syntax cross reference, each syntactic category is followed by the subclause number where it is defined. In addition, each syntactic category S is followed by a list of the categories that use S in their definitions. For example, the first listing below shows that abort_statement appears in the definition of simple_statement. abort_statement simple_statement abortable_part asynchronous_select abstract_subprogram_declaration basic_declaration accept_alternative select_alternative accept_statement accept_alternative compound_statement access_definition component_definition discriminant_specification formal_object_declaration object_declaration object_renaming_declaration parameter_and_result_profile parameter_specification return_subtype_indication access_to_object_definition access_type_definition access_to_subprogram_definition access_type_definition access_type_definition formal_access_type_definition type_definition actual_parameter_part entry_call_statement function_call generalized_indexing procedure_call_statement aggregate primary qualified_expression allocator primary ancestor_part extension_aggregate 9.8 5.1 9.7.4 9.7.4 3.9.3 3.1 9.7.1 9.7.1 9.5.2 9.7.1 5.1 3.10 3.6 3.7 12.4 3.3.1 8.5.1 6.1 6.1 6.5 3.10 3.10 3.10 3.10 3.10 12.5.4 3.2.1 6.4 9.5.3 6.4 4.1.6 6.4 4.3 4.4 4.7 4.8 4.4 4.3.2 4.3.2 array_aggregate aggregate enumeration_aggregate array_component_association named_array_aggregate array_type_definition formal_array_type_definition object_declaration type_definition aspect_clause basic_declarative_item component_item protected_operation_declaration protected_operation_item task_item aspect_definition aspect_specification aspect_mark aspect_specification pragma_argument_association aspect_specification abstract_subprogram_declaration component_declaration entry_declaration exception_declaration exception_renaming_declaration expression_function_declaration formal_abstract_subprogram_declaration formal_complete_type_declaration formal_concrete_subprogram_declaration formal_object_declaration formal_package_declaration full_type_declaration generic_instantiation generic_renaming_declaration generic_subprogram_declaration null_procedure_declaration object_declaration object_renaming_declaration package_body package_body_stub package_renaming_declaration package_specification private_extension_declaration 4.3.3 4.3 13.4 4.3.3 4.3.3 3.6 12.5.3 3.3.1 3.2.1 13.1 3.11 3.8 9.4 9.4 9.1 13.1.1 13.1.1 13.1.1 13.1.1 2.8 13.1.1 3.9.3 3.8 9.5.2 11.1 8.5.2 6.8 12.5 12.4 12.7 3.2.1 12.3 8.5.5 12.1 6.7 3.3.1 8.5.1 7.2 10.1.3 8.5.3 7.1 7.3 12.6 12.6 Annex P Syntax Summary 13 December 2012 830 private_type_declaration protected_body protected_body_stub protected_type_declaration single_protected_declaration single_task_declaration subprogram_body subprogram_body_stub subprogram_declaration subprogram_renaming_declaration subtype_declaration task_body task_body_stub task_type_declaration assignment_statement simple_statement asynchronous_select select_statement at_clause aspect_clause attribute_definition_clause aspect_clause attribute_designator attribute_definition_clause attribute_reference local_name attribute_reference name base based_literal based_literal numeric_literal based_numeral based_literal basic_declaration basic_declarative_item basic_declarative_item declarative_item package_specification binary_adding_operator simple_expression block_statement compound_statement body declarative_item body_stub body 7.3 9.4 10.1.3 9.4 9.4 9.1 6.3 10.1.3 6.1 8.5.4 3.2.2 9.1 10.1.3 9.1 5.2 5.1 9.7.4 9.7 J.7 13.1 13.3 13.1 4.1.4 13.3 4.1.4 13.1 4.1.4 4.1 2.4.2 2.4.2 2.4.2 2.4 2.4.2 2.4.2 3.1 3.11 3.11 3.11 7.1 4.5 4.4 5.6 5.1 3.11 3.11 10.1.3 3.11 Ada Reference Manual — 2012 Edition case_expression conditional_expression case_expression_alternative case_expression case_statement compound_statement case_statement_alternative case_statement character comment character_literal defining_character_literal name selector_name choice_expression discrete_choice membership_choice choice_parameter_specification exception_handler choice_relation choice_expression code_statement simple_statement compilation_unit compilation component_choice_list record_component_association component_clause record_representation_clause component_declaration component_item protected_element_declaration component_definition component_declaration constrained_array_definition unconstrained_array_definition component_item component_list component_list record_definition variant composite_constraint constraint compound_statement statement 4.5.7 4.5.7 4.5.7 4.5.7 5.4 5.1 5.4 5.4 2.1 2.7 2.5 3.5.1 4.1 4.1.3 4.4 3.8.1 4.4 11.2 11.2 4.4 4.4 13.8 5.1 10.1.1 10.1.1 4.3.1 4.3.1 13.5.1 13.5.1 3.8 3.8 9.4 3.6 3.8 3.6 3.6 3.8 3.8 3.8 3.8 3.8.1 3.2.2 3.2.2 5.1 5.1 831 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition condition entry_barrier exit_statement guard if_expression if_statement iteration_scheme conditional_entry_call select_statement conditional_expression primary constrained_array_definition array_type_definition constraint subtype_indication context_clause compilation_unit context_item context_clause decimal_fixed_point_definition fixed_point_definition decimal_literal numeric_literal declarative_item declarative_part declarative_part block_statement entry_body package_body subprogram_body task_body default_expression component_declaration discriminant_specification formal_object_declaration parameter_specification default_name subprogram_default defining_character_literal enumeration_literal_specification defining_designator function_specification generic_instantiation defining_identifier choice_parameter_specification defining_identifier_list defining_program_unit_name entry_body 4.5.7 9.5.2 5.7 9.7.1 4.5.7 5.3 5.5 9.7.3 9.7 4.5.7 4.4 3.6 3.6 3.2.2 3.2.2 10.1.2 10.1.1 10.1.2 10.1.2 3.5.9 3.5.9 2.4.1 2.4 3.11 3.11 3.11 5.6 9.5.2 7.2 6.3 9.1 3.7 3.8 3.7 12.4 6.1 12.6 12.6 3.5.1 3.5.1 6.1 6.1 12.3 3.1 11.2 3.3.1 6.1 9.5.2 entry_declaration entry_index_specification enumeration_literal_specification exception_renaming_declaration extended_return_object_declaration formal_complete_type_declaration formal_incomplete_type_declaration formal_package_declaration full_type_declaration incomplete_type_declaration iterator_specification loop_parameter_specification object_renaming_declaration package_body_stub private_extension_declaration private_type_declaration protected_body protected_body_stub protected_type_declaration single_protected_declaration single_task_declaration subtype_declaration task_body task_body_stub task_type_declaration defining_identifier_list component_declaration discriminant_specification exception_declaration formal_object_declaration number_declaration object_declaration parameter_specification defining_operator_symbol defining_designator defining_program_unit_name defining_designator generic_instantiation generic_renaming_declaration package_body package_renaming_declaration package_specification procedure_specification delay_alternative select_alternative timed_entry_call delay_relative_statement delay_statement delay_statement delay_alternative simple_statement triggering_statement delay_until_statement delay_statement 9.5.2 9.5.2 3.5.1 8.5.2 6.5 12.5 12.5 12.7 3.2.1 3.10.1 5.5.2 5.5 8.5.1 10.1.3 7.3 7.3 9.4 10.1.3 9.4 9.4 9.1 3.2.2 9.1 10.1.3 9.1 3.3.1 3.8 3.7 11.1 12.4 3.3.2 3.3.1 6.1 6.1 6.1 6.1 6.1 12.3 8.5.5 7.2 8.5.3 7.1 6.1 9.7.1 9.7.1 9.7.2 9.6 9.6 9.6 9.7.1 5.1 9.7.4 9.6 9.6 Annex P Syntax Summary 13 December 2012 832 delta_constraint scalar_constraint derived_type_definition type_definition designator subprogram_body digit 2.4.1 extended_digit numeral digits_constraint scalar_constraint direct_name accept_statement at_clause local_name name statement_identifier variant_part discrete_choice discrete_choice_list discrete_choice_list array_component_association case_expression_alternative case_statement_alternative variant discrete_range index_constraint slice discrete_subtype_definition constrained_array_definition entry_declaration entry_index_specification loop_parameter_specification discriminant_association discriminant_constraint discriminant_constraint composite_constraint discriminant_part formal_complete_type_declaration formal_incomplete_type_declaration incomplete_type_declaration private_extension_declaration private_type_declaration discriminant_specification known_discriminant_part entry_barrier entry_body entry_body J.3 3.2.2 3.4 3.2.1 6.1 6.3 2.4.2 2.4.1 3.5.9 3.2.2 4.1 9.5.2 J.7 13.1 4.1 5.1 3.8.1 3.8.1 3.8.1 3.8.1 4.3.3 4.5.7 5.4 3.8.1 3.6.1 3.6.1 4.1.2 3.6 3.6 9.5.2 9.5.2 5.5 3.7.1 3.7.1 3.7.1 3.2.2 3.7 12.5 12.5 3.10.1 7.3 7.3 3.7 3.7 9.5.2 9.5.2 9.5.2 Ada Reference Manual — 2012 Edition protected_operation_item entry_body_formal_part entry_body entry_call_alternative conditional_entry_call timed_entry_call entry_call_statement procedure_or_entry_call simple_statement entry_declaration protected_operation_declaration task_item entry_index accept_statement entry_index_specification entry_body_formal_part enumeration_aggregate enumeration_representation_clause enumeration_literal_specification enumeration_type_definition enumeration_representation_clause aspect_clause enumeration_type_definition type_definition exception_choice exception_handler exception_declaration basic_declaration exception_handler handled_sequence_of_statements exception_renaming_declaration renaming_declaration exit_statement simple_statement explicit_actual_parameter parameter_association explicit_dereference name explicit_generic_actual_parameter generic_association exponent based_literal decimal_literal expression 9.4 9.5.2 9.5.2 9.7.2 9.7.3 9.7.2 9.5.3 9.7.2 5.1 9.5.2 9.4 9.1 9.5.2 9.5.2 9.5.2 9.5.2 13.4 13.4 3.5.1 3.5.1 13.4 13.1 3.5.1 3.2.1 11.2 11.2 11.1 3.1 11.2 11.2 8.5.2 8.5 5.7 5.1 6.4 6.4 4.1 4.1 12.3 12.3 2.4.1 2.4.2 2.4.1 4.4 833 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition ancestor_part array_component_association aspect_definition assignment_statement at_clause attribute_definition_clause attribute_designator case_expression case_expression_alternative case_statement condition decimal_fixed_point_definition default_expression delay_relative_statement delay_until_statement delta_constraint digits_constraint discriminant_association entry_index explicit_actual_parameter explicit_generic_actual_parameter expression_function_declaration extended_return_object_declaration floating_point_definition if_expression indexed_component mod_clause modular_type_definition number_declaration object_declaration ordinary_fixed_point_definition position positional_array_aggregate pragma_argument_association predicate primary qualified_expression raise_statement range_attribute_designator record_component_association restriction_parameter_argument simple_return_statement type_conversion expression_function_declaration basic_declaration extended_digit based_numeral extended_return_object_declaration extended_return_statement extended_return_statement compound_statement extension_aggregate aggregate factor term 4.3.2 4.3.3 13.1.1 5.2 J.7 13.3 4.1.4 4.5.7 4.5.7 5.4 4.5.7 3.5.9 3.7 9.6 9.6 J.3 3.5.9 3.7.1 9.5.2 6.4 12.3 6.8 6.5 3.5.7 4.5.7 4.1.1 J.8 3.5.4 3.3.2 3.3.1 3.5.9 13.5.1 4.3.3 2.8 4.5.8 4.4 4.7 11.3 4.1.4 4.3.1 13.12 6.5 4.6 6.8 3.1 2.4.2 2.4.2 6.5 6.5 6.5 5.1 4.3.2 4.3 4.4 4.4 first_bit component_clause fixed_point_definition real_type_definition floating_point_definition real_type_definition formal_abstract_subprogram_declaration formal_subprogram_declaration formal_access_type_definition formal_type_definition formal_array_type_definition formal_type_definition formal_complete_type_declaration formal_type_declaration formal_concrete_subprogram_declaration formal_subprogram_declaration formal_decimal_fixed_point_definition formal_type_definition formal_derived_type_definition formal_type_definition formal_discrete_type_definition formal_type_definition formal_floating_point_definition formal_type_definition formal_incomplete_type_declaration formal_type_declaration formal_interface_type_definition formal_type_definition formal_modular_type_definition formal_type_definition 13.5.1 13.5.1 3.5.9 3.5.6 3.5.7 3.5.6 12.6 12.6 12.5.4 12.5 12.5.3 12.5 12.5 12.5 12.6 12.6 12.5.2 12.5 12.5.1 12.5 12.5.2 12.5 12.5.2 12.5 12.5 12.5 12.5.5 12.5 12.5.2 12.5 formal_object_declaration 12.4 generic_formal_parameter_declaration 12.1 formal_ordinary_fixed_point_definition formal_type_definition formal_package_actual_part formal_package_declaration formal_package_association formal_package_actual_part 12.5.2 12.5 12.7 12.7 12.7 12.7 formal_package_declaration 12.7 generic_formal_parameter_declaration 12.1 formal_part parameter_and_result_profile parameter_profile 6.1 6.1 6.1 formal_private_type_definition 12.5.1 Annex P Syntax Summary 13 December 2012 834 formal_type_definition formal_signed_integer_type_definition formal_type_definition 12.5 12.5.2 12.5 formal_subprogram_declaration 12.6 generic_formal_parameter_declaration 12.1 formal_type_declaration 12.5 generic_formal_parameter_declaration 12.1 formal_type_definition formal_complete_type_declaration full_type_declaration type_declaration function_call name function_specification expression_function_declaration subprogram_specification general_access_modifier access_to_object_definition generalized_indexing name generalized_reference name generic_actual_part formal_package_actual_part generic_instantiation generic_association formal_package_association generic_actual_part generic_declaration basic_declaration library_unit_declaration generic_formal_parameter_declaration generic_formal_part generic_formal_part generic_package_declaration generic_subprogram_declaration generic_instantiation basic_declaration library_unit_declaration generic_package_declaration generic_declaration generic_renaming_declaration library_unit_renaming_declaration renaming_declaration generic_subprogram_declaration 12.5 12.5 3.2.1 3.2.1 6.4 4.1 6.1 6.8 6.1 3.10 3.10 4.1.6 4.1 4.1.5 4.1 12.3 12.7 12.3 12.3 12.7 12.3 12.1 3.1 10.1.1 12.1 12.1 12.1 12.1 12.1 12.3 3.1 10.1.1 12.1 12.1 8.5.5 10.1.1 8.5 12.1 Ada Reference Manual — 2012 Edition generic_declaration goto_statement simple_statement graphic_character character_literal string_element guard selective_accept handled_sequence_of_statements accept_statement block_statement entry_body extended_return_statement package_body subprogram_body task_body identifier accept_statement aspect_definition aspect_mark attribute_designator block_statement defining_identifier designator direct_name entry_body loop_statement package_body package_specification pragma pragma_argument_association protected_body protected_definition restriction selector_name task_body task_definition identifier_extend identifier identifier_start identifier if_expression conditional_expression if_statement compound_statement implicit_dereference prefix incomplete_type_declaration type_declaration index_constraint 12.1 5.8 5.1 2.1 2.5 2.6 9.7.1 9.7.1 11.2 9.5.2 5.6 9.5.2 6.5 7.2 6.3 9.1 2.3 9.5.2 13.1.1 13.1.1 4.1.4 5.6 3.1 6.1 4.1 9.5.2 5.5 7.2 7.1 2.8 2.8 9.4 9.4 13.12 4.1.3 9.1 9.1 2.3 2.3 2.3 2.3 4.5.7 4.5.7 5.3 5.1 4.1 4.1 3.10.1 3.2.1 3.6.1 835 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition composite_constraint index_subtype_definition unconstrained_array_definition indexed_component name integer_type_definition type_definition interface_list derived_type_definition formal_derived_type_definition interface_type_definition private_extension_declaration protected_type_declaration single_protected_declaration single_task_declaration task_type_declaration interface_type_definition formal_interface_type_definition type_definition iteration_scheme loop_statement iterator_specification iteration_scheme quantified_expression known_discriminant_part discriminant_part full_type_declaration protected_type_declaration task_type_declaration label 5.1 sequence_of_statements statement last_bit component_clause letter_lowercase identifier_start letter_modifier identifier_start letter_other identifier_start letter_titlecase identifier_start letter_uppercase identifier_start library_item compilation_unit library_unit_body 3.2.2 3.6 3.6 4.1.1 4.1 3.5.4 3.2.1 3.9.4 3.4 12.5.1 3.9.4 7.3 9.4 9.4 9.1 9.1 3.9.4 12.5.5 3.2.1 5.5 5.5 5.5.2 5.5 4.5.8 3.7 3.7 3.2.1 9.4 9.1 5.1 5.1 13.5.1 13.5.1 ... 2.3 ... 2.3 ... 2.3 ... 2.3 ... 2.3 10.1.1 10.1.1 10.1.1 library_item library_unit_declaration library_item library_unit_renaming_declaration library_item limited_with_clause with_clause local_name attribute_definition_clause component_clause enumeration_representation_clause record_representation_clause loop_parameter_specification iteration_scheme quantified_expression loop_statement compound_statement mark_non_spacing identifier_extend mark_spacing_combining identifier_extend membership_choice membership_choice_list membership_choice_list relation mod_clause record_representation_clause mode formal_object_declaration parameter_specification modular_type_definition integer_type_definition multiplying_operator term name abort_statement aspect_definition assignment_statement attribute_definition_clause default_name entry_call_statement exception_choice exception_renaming_declaration exit_statement explicit_actual_parameter explicit_dereference explicit_generic_actual_parameter formal_package_declaration 10.1.1 10.1.1 10.1.1 10.1.1 10.1.1 10.1.2 10.1.2 13.1 13.3 13.5.1 13.4 13.5.1 5.5 5.5 4.5.8 5.5 5.1 ... 2.3 ... 2.3 4.4 4.4 4.4 4.4 J.8 13.5.1 6.1 12.4 6.1 3.5.4 3.5.4 4.5 4.4 4.1 9.8 13.1.1 5.2 13.3 12.6 9.5.3 11.2 8.5.2 5.7 6.4 4.1 12.3 12.7 Annex P Syntax Summary 13 December 2012 836 function_call generalized_reference generic_instantiation generic_renaming_declaration goto_statement implicit_dereference iterator_specification limited_with_clause local_name nonlimited_with_clause object_renaming_declaration package_renaming_declaration parent_unit_name pragma_argument_association prefix primary procedure_call_statement raise_statement requeue_statement restriction_parameter_argument storage_pool_indicator subpool_specification subprogram_renaming_declaration subtype_mark type_conversion use_package_clause named_array_aggregate array_aggregate nonlimited_with_clause with_clause null_exclusion access_definition access_type_definition discriminant_specification formal_object_declaration object_renaming_declaration parameter_and_result_profile parameter_specification subtype_indication null_procedure_declaration basic_declaration null_statement simple_statement number_decimal identifier_extend number_declaration basic_declaration number_letter identifier_start numeral base decimal_literal exponent 6.4 4.1.5 12.3 8.5.5 5.8 4.1 5.5.2 10.1.2 13.1 10.1.2 8.5.1 8.5.3 10.1.1 2.8 4.1 4.4 6.4 11.3 9.5.4 13.12 13.11.3 4.8 8.5.4 3.2.2 4.6 8.4 4.3.3 4.3.3 10.1.2 10.1.2 3.10 3.10 3.10 3.7 12.4 8.5.1 6.1 6.1 3.2.2 6.7 3.1 5.1 5.1 ... 2.3 3.3.2 3.1 ... 2.3 2.4.1 2.4.2 2.4.1 2.4.1 Ada Reference Manual — 2012 Edition numeric_literal primary object_declaration basic_declaration object_renaming_declaration renaming_declaration operator_symbol defining_operator_symbol designator direct_name selector_name ordinary_fixed_point_definition fixed_point_definition overriding_indicator abstract_subprogram_declaration entry_declaration expression_function_declaration generic_instantiation null_procedure_declaration subprogram_body subprogram_body_stub subprogram_declaration subprogram_renaming_declaration package_body library_unit_body proper_body package_body_stub body_stub package_declaration basic_declaration library_unit_declaration package_renaming_declaration library_unit_renaming_declaration renaming_declaration package_specification generic_package_declaration package_declaration parameter_and_result_profile access_definition access_to_subprogram_definition function_specification parameter_association actual_parameter_part parameter_profile accept_statement access_definition access_to_subprogram_definition entry_body_formal_part entry_declaration procedure_specification 2.4 4.4 3.3.1 3.1 8.5.1 8.5 6.1 6.1 6.1 4.1 4.1.3 3.5.9 3.5.9 8.3.1 3.9.3 9.5.2 6.8 12.3 6.7 6.3 10.1.3 6.1 8.5.4 7.2 10.1.1 3.11 10.1.3 10.1.3 7.1 3.1 10.1.1 8.5.3 10.1.1 8.5 7.1 12.1 7.1 6.1 3.10 3.10 6.1 6.4 6.4 6.1 9.5.2 3.10 3.10 9.5.2 9.5.2 6.1 837 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition parameter_specification formal_part parent_unit_name defining_program_unit_name designator package_body package_specification subunit position component_clause positional_array_aggregate array_aggregate pragma_argument_association pragma predicate quantified_expression prefix attribute_reference function_call generalized_indexing indexed_component procedure_call_statement range_attribute_reference selected_component slice primary factor private_extension_declaration type_declaration private_type_declaration type_declaration procedure_call_statement procedure_or_entry_call simple_statement procedure_or_entry_call entry_call_alternative triggering_statement procedure_specification null_procedure_declaration subprogram_specification proper_body body subunit protected_body proper_body protected_body_stub body_stub 6.1 6.1 10.1.1 6.1 6.1 7.2 7.1 10.1.3 13.5.1 13.5.1 4.3.3 4.3.3 2.8 2.8 4.5.8 4.5.8 4.1 4.1.4 6.4 4.1.6 4.1.1 6.4 4.1.4 4.1.3 4.1.2 4.4 4.4 7.3 3.2.1 7.3 3.2.1 6.4 9.7.2 5.1 9.7.2 9.7.2 9.7.4 6.1 6.7 6.1 3.11 3.11 10.1.3 9.4 3.11 10.1.3 10.1.3 protected_definition protected_type_declaration single_protected_declaration protected_element_declaration protected_definition protected_operation_declaration protected_definition protected_element_declaration protected_operation_item protected_body protected_type_declaration full_type_declaration punctuation_connector identifier_extend qualified_expression allocator code_statement name quantified_expression primary quantifier quantified_expression raise_statement simple_statement range discrete_choice discrete_range discrete_subtype_definition membership_choice range_constraint range_attribute_designator range_attribute_reference range_attribute_reference range range_constraint delta_constraint digits_constraint scalar_constraint real_range_specification decimal_fixed_point_definition floating_point_definition ordinary_fixed_point_definition real_type_definition type_definition record_aggregate aggregate record_component_association 9.4 9.4 9.4 9.4 9.4 9.4 9.4 9.4 9.4 9.4 9.4 3.2.1 ... 2.3 4.7 4.8 13.8 4.1 4.5.8 4.4 4.5.8 4.5.8 11.3 5.1 3.5 3.8.1 3.6.1 3.6 4.4 3.5 4.1.4 4.1.4 4.1.4 3.5 3.5 J.3 3.5.9 3.2.2 3.5.7 3.5.9 3.5.7 3.5.9 3.5.6 3.2.1 4.3.1 4.3 4.3.1 Annex P Syntax Summary 13 December 2012 838 record_component_association_list 4.3.1 record_component_association_list extension_aggregate record_aggregate record_definition record_extension_part record_type_definition record_extension_part derived_type_definition record_representation_clause aspect_clause record_type_definition type_definition relation expression relational_operator choice_relation relation renaming_declaration basic_declaration requeue_statement simple_statement restriction_parameter_argument restriction return_subtype_indication extended_return_object_declaration scalar_constraint constraint select_alternative selective_accept select_statement compound_statement selected_component name selective_accept select_statement selector_name component_choice_list discriminant_association formal_package_association generic_association parameter_association selected_component sequence_of_statements abortable_part accept_alternative 4.3.1 4.3.2 4.3.1 3.8 3.9.1 3.8 3.9.1 3.4 13.5.1 13.1 3.8 3.2.1 4.4 4.4 4.5 4.4 4.4 8.5 3.1 9.5.4 5.1 13.12 13.12 6.5 6.5 3.2.2 3.2.2 9.7.1 9.7.1 9.7 5.1 4.1.3 4.1 9.7.1 9.7 4.1.3 4.3.1 3.7.1 12.7 12.3 6.4 4.1.3 5.1 9.7.4 9.7.1 Ada Reference Manual — 2012 Edition case_statement_alternative conditional_entry_call delay_alternative entry_call_alternative exception_handler handled_sequence_of_statements if_statement loop_statement selective_accept triggering_alternative signed_integer_type_definition integer_type_definition simple_expression choice_relation first_bit last_bit range real_range_specification relation signed_integer_type_definition simple_return_statement simple_statement simple_statement statement single_protected_declaration object_declaration single_task_declaration object_declaration slice 4.1.2 name statement sequence_of_statements statement_identifier block_statement label loop_statement string_element string_literal string_literal operator_symbol primary subpool_specification allocator subprogram_body library_unit_body proper_body protected_operation_item subprogram_body_stub body_stub 5.4 9.7.3 9.7.1 9.7.2 11.2 11.2 5.3 5.5 9.7.1 9.7.4 3.5.4 3.5.4 4.4 4.4 13.5.1 13.5.1 3.5 3.5.7 4.4 3.5.4 6.5 5.1 5.1 5.1 9.4 3.3.1 9.1 3.3.1 4.1 5.1 5.1 5.1 5.6 5.1 5.5 2.6 2.6 2.6 6.1 4.4 4.8 4.8 6.3 10.1.1 3.11 9.4 10.1.3 10.1.3 839 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition subprogram_declaration basic_declaration library_unit_declaration protected_operation_declaration protected_operation_item subprogram_default 6.1 3.1 10.1.1 9.4 9.4 12.6 formal_abstract_subprogram_declaration formal_concrete_subprogram_declaration 12.6 12.6 subprogram_renaming_declaration library_unit_renaming_declaration renaming_declaration 8.5.4 10.1.1 8.5 subprogram_specification 6.1 3.9.3 abstract_subprogram_declaration formal_abstract_subprogram_declaration formal_concrete_subprogram_declaration generic_subprogram_declaration subprogram_body subprogram_body_stub subprogram_declaration subprogram_renaming_declaration 12.1 6.3 10.1.3 6.1 8.5.4 subtype_declaration basic_declaration subtype_indication access_to_object_definition allocator component_definition derived_type_definition discrete_choice discrete_range discrete_subtype_definition iterator_specification object_declaration private_extension_declaration return_subtype_indication subtype_declaration subtype_mark access_definition ancestor_part discriminant_specification explicit_generic_actual_parameter formal_derived_type_definition formal_object_declaration index_subtype_definition interface_list membership_choice object_renaming_declaration parameter_and_result_profile parameter_specification qualified_expression subtype_indication type_conversion use_type_clause subunit compilation_unit 3.2.2 3.1 3.2.2 3.10 4.8 3.6 3.4 3.8.1 3.6.1 3.6 5.5.2 3.3.1 7.3 6.5 3.2.2 3.2.2 3.10 4.3.2 3.7 12.3 12.5.1 12.4 3.6 3.9.4 4.4 8.5.1 6.1 6.1 4.7 3.2.2 4.6 8.4 10.1.3 10.1.1 12.6 12.6 term 4.4 simple_expression task_body proper_body task_body_stub body_stub task_definition single_task_declaration task_type_declaration task_item task_definition task_type_declaration full_type_declaration terminate_alternative select_alternative timed_entry_call select_statement triggering_alternative asynchronous_select triggering_statement triggering_alternative type_conversion name type_declaration basic_declaration type_definition full_type_declaration unary_adding_operator simple_expression unconstrained_array_definition array_type_definition underline based_numeral numeral unknown_discriminant_part discriminant_part use_clause basic_declarative_item context_item generic_formal_part use_package_clause use_clause use_type_clause use_clause 9.1 3.11 10.1.3 10.1.3 9.1 9.1 9.1 9.1 9.1 9.1 3.2.1 4.4 9.7.1 9.7.1 9.7.2 9.7 9.7.4 9.7.4 9.7.4 9.7.4 4.6 4.1 3.2.1 3.1 3.2.1 3.2.1 4.5 4.4 3.6 3.6 ... 2.4.2 2.4.1 3.7 3.7 8.4 3.11 10.1.2 12.1 8.4 8.4 8.4 8.4 Annex P Syntax Summary 13 December 2012 840 Ada Reference Manual — 2012 Edition variant variant_part variant_part 3.8.1 3.8.1 3.8.1 component_list with_clause context_item 3.8 10.1.2 10.1.2 841 13 December 2012 Syntax Summary Annex P Ada Reference Manual — 2012 Edition Annex Q (informative) Language-Defined Entities This annex lists the language-defined entities of the language. A list of language-defined library units can be found in Annex A, “Predefined Language Environment”. 1/2 Q.1 Language-Defined Packages This subclause lists all language-defined packages. 1/3 Ada A.2(2) Address_To_Access_Conversions child of System 13.7.2(2) Arithmetic child of Ada.Calendar 9.6.1(8/2) ASCII in Standard A.1(36.3/2) Assertions child of Ada 11.4.2(12/2) Asynchronous_Task_Control child of Ada D.11(3/2) Bounded child of Ada.Strings A.4.4(3) Bounded_IO child of Ada.Text_IO A.10.11(3/2) child of Ada.Wide_Text_IO A.11(4/3) child of Ada.Wide_Wide_Text_IO A.11(4/3) Bounded_Priority_Queues child of Ada.Containers A.18.31(2/3) Bounded_Synchronized_Queues child of Ada.Containers A.18.29(2/3) C child of Interfaces B.3(4) Calendar child of Ada 9.6(10) Characters child of Ada A.3.1(2) COBOL child of Interfaces B.4(7) Command_Line child of Ada A.15(3) Complex_Arrays child of Ada.Numerics G.3.2(53/2) Complex_Elementary_Functions child of Ada.Numerics G.1.2(9/1) Complex_Text_IO child of Ada G.1.3(9.1/2) Complex_Types child of Ada.Numerics G.1.1(25/1) Complex_IO child of Ada.Text_IO G.1.3(3) child of Ada.Wide_Text_IO G.1.4(1) child of Ada.Wide_Wide_Text_IO G.1.5(1/2) Constants child of Ada.Strings.Maps A.4.6(3/2) Containers child of Ada A.18.1(3/2) Conversions child of Ada.Characters A.3.4(2/2) child of Ada.Strings.UTF_Encoding A.4.11(15/3) Decimal child of Ada F.2(2) Decimal_Conversions in Interfaces.COBOL B.4(31) Decimal_IO in Ada.Text_IO A.10.1(73) Decimal_Output in Ada.Text_IO.Editing F.3.3(11) Direct_IO child of Ada A.8.4(2) Directories child of Ada A.16(3/2) Discrete_Random child of Ada.Numerics A.5.2(17) Dispatching child of Ada D.2.1(1.2/3) Dispatching_Domains child of System.Multiprocessors D.16.1(3/3) Doubly_Linked_Lists child of Ada.Containers A.18.3(5/3) Dynamic_Priorities child of Ada D.5.1(3/2) EDF child of Ada.Dispatching D.2.6(9/2) child of Ada.Synchronous_Task_Control D.10(5.2/3) Editing child of Ada.Text_IO F.3.3(3) child of Ada.Wide_Text_IO F.3.4(1) child of Ada.Wide_Wide_Text_IO F.3.5(1/2) Elementary_Functions child of Ada.Numerics A.5.1(9/1) Enumeration_IO in Ada.Text_IO A.10.1(79) 843 13 December 2012 Language-Defined Entities Annex Q Ada Reference Manual — 2012 Edition Environment_Variables child of Ada A.17(3/2) Exceptions child of Ada 11.4.1(2/2) Execution_Time child of Ada D.14(3/2) Finalization child of Ada 7.6(4/3) Fixed child of Ada.Strings A.4.3(5) Fixed_IO in Ada.Text_IO A.10.1(68) Float_Random child of Ada.Numerics A.5.2(5) Float_Text_IO child of Ada A.10.9(33) Float_Wide_Text_IO child of Ada A.11(2/2) Float_Wide_Wide_Text_IO child of Ada A.11(3/2) Float_IO in Ada.Text_IO A.10.1(63) Formatting child of Ada.Calendar 9.6.1(15/2) Fortran child of Interfaces B.5(4) Generic_Complex_Arrays child of Ada.Numerics G.3.2(2/2) Generic_Complex_Elementary_Functions child of Ada.Numerics G.1.2(2/2) Generic_Complex_Types child of Ada.Numerics G.1.1(2/1) Generic_Dispatching_Constructor child of Ada.Tags 3.9(18.2/3) Generic_Elementary_Functions child of Ada.Numerics A.5.1(3) Generic_Bounded_Length in Ada.Strings.Bounded A.4.4(4) Generic_Keys in Ada.Containers.Hashed_Sets A.18.8(50/2) in Ada.Containers.Ordered_Sets A.18.9(62/2) Generic_Real_Arrays child of Ada.Numerics G.3.1(2/2) Generic_Sorting in Ada.Containers.Doubly_Linked_Lists A.18.3(47/2) in Ada.Containers.Vectors A.18.2(75/2) Group_Budgets child of Ada.Execution_Time D.14.2(3/3) Handling child of Ada.Characters A.3.2(2/2) child of Ada.Wide_Characters A.3.5(3/3) child of Ada.Wide_Wide_Characters A.3.6(1/3) Hashed_Maps child of Ada.Containers A.18.5(2/3) Hashed_Sets child of Ada.Containers A.18.8(2/3) Hierarchical_File_Names child of Ada.Directories A.16.1(3/3) Indefinite_Doubly_Linked_Lists child of Ada.Containers A.18.12(2/3) Indefinite_Hashed_Maps child of Ada.Containers A.18.13(2/3) Indefinite_Hashed_Sets child of Ada.Containers A.18.15(2/3) Indefinite_Holders child of Ada.Containers A.18.18(5/3) Indefinite_Multiway_Trees child of Ada.Containers A.18.17(2/3) Indefinite_Ordered_Maps child of Ada.Containers A.18.14(2/3) Indefinite_Ordered_Sets child of Ada.Containers A.18.16(2/3) Indefinite_Vectors child of Ada.Containers A.18.11(2/3) Information child of Ada.Directories A.16(124/2) Integer_Text_IO child of Ada A.10.8(21) Integer_Wide_Text_IO child of Ada A.11(2/2) Integer_Wide_Wide_Text_IO child of Ada A.11(3/2) Integer_IO in Ada.Text_IO A.10.1(52) Interfaces B.2(3) Interrupts child of Ada C.3.2(2/3) child of Ada.Execution_Time D.14.3(3/3) IO_Exceptions child of Ada A.13(3) Iterator_Interfaces child of Ada 5.5.1(2/3) Latin_1 child of Ada.Characters A.3.3(3) List_Iterator_Interfaces in Ada.Containers.Doubly_Linked_Lists A.18.3(9.2/3) Locales child of Ada A.19(3/3) Machine_Code child of System 13.8(7) Map_Iterator_Interfaces in Ada.Containers.Hashed_Maps A.18.5(6.2/3) in Ada.Containers.Ordered_Maps A.18.6(7.2/3) Maps child of Ada.Strings A.4.2(3/2) Modular_IO in Ada.Text_IO A.10.1(57) Multiprocessors child of System D.16(3/3) Multiway_Trees child of Ada.Containers A.18.10(7/3) Names child of Ada.Interrupts C.3.2(12) Non_Preemptive child of Ada.Dispatching D.2.4(2.2/3) Numerics child of Ada A.5(3/2) Ordered_Maps child of Ada.Containers A.18.6(2/3) Q.1 Language-Defined Packages 13 December 2012 844 Ordered_Sets child of Ada.Containers A.18.9(2/3) Pointers child of Interfaces.C B.3.2(4) Real_Arrays child of Ada.Numerics G.3.1(31/2) Real_Time child of Ada D.8(3) Round_Robin child of Ada.Dispatching D.2.5(4/2) RPC child of System E.5(3) Sequential_IO child of Ada A.8.1(2) Set_Iterator_Interfaces in Ada.Containers.Hashed_Sets A.18.8(6.2/3) in Ada.Containers.Ordered_Sets A.18.9(7.2/3) Single_Precision_Complex_Types in Interfaces.Fortran B.5(8) Standard A.1(4) Storage_Elements child of System 13.7.1(2/2) Storage_IO child of Ada A.9(3) Storage_Pools child of System 13.11(5) Stream_IO child of Ada.Streams A.12.1(3/3) Streams child of Ada 13.13.1(2) Strings child of Ada A.4.1(3) child of Ada.Strings.UTF_Encoding A.4.11(22/3) child of Interfaces.C B.3.1(3) Subpools child of System.Storage_Pools 13.11.4(3/3) Synchronized_Queue_Interfaces child of Ada.Containers A.18.27(3/3) Synchronous_Barriers child of Ada D.10.1(3/3) Synchronous_Task_Control child of Ada D.10(3/2) System 13.7(3/2) Tags child of Ada 3.9(6/2) Task_Attributes child of Ada C.7.2(2) Task_Identification child of Ada C.7.1(2/2) Task_Termination child of Ada C.7.3(2/2) Text_Streams child of Ada.Text_IO A.12.2(3) child of Ada.Wide_Text_IO A.12.3(3) child of Ada.Wide_Wide_Text_IO A.12.4(3/2) Text_IO child of Ada A.10.1(2) Time_Zones child of Ada.Calendar 9.6.1(2/2) Ada Reference Manual — 2012 Edition Timers child of Ada.Execution_Time D.14.1(3/2) Timing_Events child of Ada.Real_Time D.15(3/2) Tree_Iterator_Interfaces in Ada.Containers.Multiway_Trees A.18.10(13/3) Unbounded child of Ada.Strings A.4.5(3) Unbounded_IO child of Ada.Text_IO A.10.12(3/2) child of Ada.Wide_Text_IO A.11(5/3) child of Ada.Wide_Wide_Text_IO A.11(5/3) Unbounded_Priority_Queues child of Ada.Containers A.18.30(2/3) Unbounded_Synchronized_Queues child of Ada.Containers A.18.28(2/3) UTF_Encoding child of Ada.Strings A.4.11(3/3) Vector_Iterator_Interfaces in Ada.Containers.Vectors A.18.2(11.2/3) Vectors child of Ada.Containers A.18.2(6/3) Wide_Bounded child of Ada.Strings A.4.7(1/3) Wide_Constants child of Ada.Strings.Wide_Maps A.4.7(1/3), A.4.8(28/2) Wide_Equal_Case_Insensitive child of Ada.Strings A.4.7(1/3) Wide_Fixed child of Ada.Strings A.4.7(1/3) Wide_Hash child of Ada.Strings A.4.7(1/3) Wide_Hash_Case_Insensitive child of Ada.Strings A.4.7(1/3) Wide_Maps child of Ada.Strings A.4.7(3) Wide_Text_IO child of Ada A.11(2/2) Wide_Unbounded child of Ada.Strings A.4.7(1/3) Wide_Characters child of Ada A.3.1(4/2) Wide_Strings child of Ada.Strings.UTF_Encoding A.4.11(30/3) Wide_Wide_Constants child of Ada.Strings.Wide_Wide_Maps A.4.8(1/3) Wide_Wide_Equal_Case_Insensitive child of Ada.Strings A.4.8(1/3) Wide_Wide_Hash child of Ada.Strings A.4.8(1/3) Wide_Wide_Hash_Case_Insensitive child of Ada.Strings A.4.8(1/3) Wide_Wide_Text_IO child of Ada A.11(3/2) Wide_Wide_Bounded child of Ada.Strings A.4.8(1/3) Wide_Wide_Characters child of Ada A.3.1(6/2) Wide_Wide_Fixed child of Ada.Strings A.4.8(1/3) 845 13 December 2012 Language-Defined Packages Q.1 Ada Reference Manual — 2012 Edition Wide_Wide_Maps child of Ada.Strings A.4.8(3/2) Wide_Wide_Strings child of Ada.Strings.UTF_Encoding A.4.11(38/3) Wide_Wide_Unbounded child of Ada.Strings A.4.8(1/3) Q.2 Language-Defined Types and Subtypes 1/3 This subclause lists all language-defined types and subtypes. Address in System 13.7(12) Alignment in Ada.Strings A.4.1(6) Alphanumeric in Interfaces.COBOL B.4(16/3) Any_Priority subtype of Integer in System 13.7(16) Attribute_Handle in Ada.Task_Attributes C.7.2(3) Barrier_Limit subtype of Positive in Ada.Synchronous_Barriers D.10.1(4/3) Binary in Interfaces.COBOL B.4(10) Binary_Format in Interfaces.COBOL B.4(24) Bit_Order in System 13.7(15/2) Boolean in Standard A.1(5) Bounded_String in Ada.Strings.Bounded A.4.4(6) Buffer_Type subtype of Storage_Array in Ada.Storage_IO A.9(4) Byte in Interfaces.COBOL B.4(29/3) Byte_Array in Interfaces.COBOL B.4(29/3) C_float in Interfaces.C B.3(15) Cause_Of_Termination in Ada.Task_Termination C.7.3(3/2) char in Interfaces.C B.3(19) char16_array in Interfaces.C B.3(39.5/3) char16_t in Interfaces.C B.3(39.2/2) char32_array in Interfaces.C B.3(39.14/3) char32_t in Interfaces.C B.3(39.11/2) char_array in Interfaces.C B.3(23/3) char_array_access in Interfaces.C.Strings B.3.1(4) Character in Standard A.1(35/3) Character_Mapping in Ada.Strings.Maps A.4.2(20/2) Character_Mapping_Function in Ada.Strings.Maps A.4.2(25) Character_Range in Ada.Strings.Maps A.4.2(6) Character_Ranges in Ada.Strings.Maps A.4.2(7) Character_Sequence subtype of String in Ada.Strings.Maps A.4.2(16) Character_Set in Ada.Strings.Maps A.4.2(4/2) in Interfaces.Fortran B.5(11) chars_ptr in Interfaces.C.Strings B.3.1(5/2) chars_ptr_array in Interfaces.C.Strings B.3.1(6/2) COBOL_Character in Interfaces.COBOL B.4(13) Complex in Ada.Numerics.Generic_Complex_Types G.1.1(3) in Interfaces.Fortran B.5(9) Complex_Matrix in Ada.Numerics.Generic_Complex_Arrays G.3.2(4/2) Complex_Vector in Ada.Numerics.Generic_Complex_Arrays G.3.2(4/2) Constant_Reference_Type in Ada.Containers.Indefinite_Holders A.18.18(16/3) in Ada.Containers.Multiway_Trees A.18.10(28/3) Controlled in Ada.Finalization 7.6(5/2) Count in Ada.Direct_IO A.8.4(4) in Ada.Streams.Stream_IO A.12.1(7) in Ada.Text_IO A.10.1(5) Count_Type in Ada.Containers A.18.1(5/2) Country_Code in Ada.Locales A.19(4/3) CPU subtype of CPU_Range in System.Multiprocessors D.16(4/3) CPU_Range in System.Multiprocessors D.16(4/3) CPU_Time in Ada.Execution_Time D.14(4/2) Q.1 Language-Defined Packages 13 December 2012 846 Ada Reference Manual — 2012 Edition Cursor in Ada.Containers.Doubly_Linked_Lists A.18.3(7/2) in Ada.Containers.Hashed_Maps A.18.5(4/2) in Ada.Containers.Hashed_Sets A.18.8(4/2) in Ada.Containers.Multiway_Trees A.18.10(9/3) in Ada.Containers.Ordered_Maps A.18.6(5/2) in Ada.Containers.Ordered_Sets A.18.9(5/2) in Ada.Containers.Vectors A.18.2(9/2) Day_Count in Ada.Calendar.Arithmetic 9.6.1(10/2) Day_Duration subtype of Duration in Ada.Calendar 9.6(11/2) Day_Name in Ada.Calendar.Formatting 9.6.1(17/2) Day_Number subtype of Integer in Ada.Calendar 9.6(11/2) Deadline subtype of Time in Ada.Dispatching.EDF D.2.6(9/2) Decimal_Element in Interfaces.COBOL B.4(12/3) Direction in Ada.Strings A.4.1(6) Directory_Entry_Type in Ada.Directories A.16(29/2) Dispatching_Domain in System.Multiprocessors.Dispatching_Domains D.16.1(5/3) Display_Format in Interfaces.COBOL B.4(22) double in Interfaces.C B.3(16) Double_Precision in Interfaces.Fortran B.5(6) Duration in Standard A.1(43) Encoding_Scheme in Ada.Strings.UTF_Encoding A.4.11(4/3) Exception_Id in Ada.Exceptions 11.4.1(2/2) Exception_Occurrence in Ada.Exceptions 11.4.1(3/2) Exception_Occurrence_Access in Ada.Exceptions 11.4.1(3/2) Exit_Status in Ada.Command_Line A.15(7) Extended_Index subtype of Index_Type'Base in Ada.Containers.Vectors A.18.2(7/2) Field subtype of Integer in Ada.Text_IO A.10.1(6) File_Access in Ada.Text_IO A.10.1(18) File_Kind in Ada.Directories A.16(22/2) File_Mode in Ada.Direct_IO A.8.4(4) in Ada.Sequential_IO A.8.1(4) in Ada.Streams.Stream_IO A.12.1(6) in Ada.Text_IO A.10.1(4) File_Size in Ada.Directories A.16(23/2) File_Type in Ada.Direct_IO A.8.4(3) in Ada.Sequential_IO A.8.1(3) in Ada.Streams.Stream_IO A.12.1(5) in Ada.Text_IO A.10.1(3) Filter_Type in Ada.Directories A.16(30/2) Float in Standard A.1(21) Floating in Interfaces.COBOL B.4(9) Fortran_Character in Interfaces.Fortran B.5(12/3) Fortran_Integer in Interfaces.Fortran B.5(5) Forward_Iterator in Ada.Iterator_Interfaces 5.5.1(3/3) Generator in Ada.Numerics.Discrete_Random A.5.2(19) in Ada.Numerics.Float_Random A.5.2(7) Group_Budget in Ada.Execution_Time.Group_Budgets D.14.2(4/3) Group_Budget_Handler in Ada.Execution_Time.Group_Budgets D.14.2(5/2) Hash_Type in Ada.Containers A.18.1(4/2) Holder in Ada.Containers.Indefinite_Holders A.18.18(6/3) Hour_Number subtype of Natural in Ada.Calendar.Formatting 9.6.1(20/2) Imaginary in Ada.Numerics.Generic_Complex_Types G.1.1(4/2) Imaginary subtype of Imaginary in Interfaces.Fortran B.5(10) int in Interfaces.C B.3(7) Integer in Standard A.1(12) Integer_Address in System.Storage_Elements 13.7.1(10/3) Interrupt_Id in Ada.Interrupts C.3.2(2/3) Interrupt_Priority subtype of Any_Priority in System 13.7(16) ISO_646 subtype of Character in Ada.Characters.Handling A.3.2(9) Language_Code in Ada.Locales A.19(4/3) Leap_Seconds_Count subtype of Integer in Ada.Calendar.Arithmetic 9.6.1(11/2) Length_Range subtype of Natural in Ada.Strings.Bounded A.4.4(8) Limited_Controlled in Ada.Finalization 7.6(7/2) List in Ada.Containers.Doubly_Linked_Lists A.18.3(6/3) Logical in Interfaces.Fortran B.5(7) long in Interfaces.C B.3(7) 847 13 December 2012 Language-Defined Types and Subtypes Q.2 Ada Reference Manual — 2012 Edition Long_Binary in Interfaces.COBOL B.4(10) long_double in Interfaces.C B.3(17) Long_Floating in Interfaces.COBOL B.4(9) Map in Ada.Containers.Hashed_Maps A.18.5(3/3) in Ada.Containers.Ordered_Maps A.18.6(4/3) Membership in Ada.Strings A.4.1(6) Minute_Number subtype of Natural in Ada.Calendar.Formatting 9.6.1(20/2) Month_Number subtype of Integer in Ada.Calendar 9.6(11/2) Name in System 13.7(4) Name_Case_Kind in Ada.Directories A.16(20.1/3) Natural subtype of Integer in Standard A.1(13) Number_Base subtype of Integer in Ada.Text_IO A.10.1(6) Numeric in Interfaces.COBOL B.4(20/3) Packed_Decimal in Interfaces.COBOL B.4(12/3) Packed_Format in Interfaces.COBOL B.4(26) Parameterless_Handler in Ada.Interrupts C.3.2(2/3) Params_Stream_Type in System.RPC E.5(6) Partition_Id in System.RPC E.5(4) Picture in Ada.Text_IO.Editing F.3.3(4) plain_char in Interfaces.C B.3(11) Pointer in Interfaces.C.Pointers B.3.2(5) Positive subtype of Integer in Standard A.1(13) Positive_Count subtype of Count in Ada.Direct_IO A.8.4(4) in Ada.Streams.Stream_IO A.12.1(7) in Ada.Text_IO A.10.1(5) Priority subtype of Any_Priority in System 13.7(16) ptrdiff_t in Interfaces.C B.3(12) Queue in Ada.Containers.Bounded_Priority_Queues A.18.31(4/3) in Ada.Containers.Bounded_Synchronized_Queues A.18.29(4/3) in Ada.Containers.Synchronized_Queue_Interfaces A.18.27(4/3) in Ada.Containers.Unbounded_Priority_Queues A.18.30(4/3) in Ada.Containers.Unbounded_Synchronized_Queues A.18.28(4/3) Real in Interfaces.Fortran B.5(6) Real_Matrix in Ada.Numerics.Generic_Real_Arrays G.3.1(4/2) Real_Vector in Ada.Numerics.Generic_Real_Arrays G.3.1(4/2) Reference_Type in Ada.Containers.Doubly_Linked_Lists A.18.3(17.2/3) in Ada.Containers.Hashed_Maps A.18.5(17.2/3) in Ada.Containers.Hashed_Sets A.18.8(58.1/3) in Ada.Containers.Indefinite_Holders A.18.18(17/3) in Ada.Containers.Multiway_Trees A.18.10(29/3) in Ada.Containers.Ordered_Maps A.18.6(16.2/3) in Ada.Containers.Ordered_Sets A.18.9(73.1/3) in Ada.Containers.Vectors A.18.2(34.2/3) Reversible_Iterator in Ada.Iterator_Interfaces 5.5.1(4/3) Root_Storage_Pool in System.Storage_Pools 13.11(6/2) Root_Storage_Pool_With_Subpools in System.Storage_Pools.Subpools 13.11.4(4/3) Root_Stream_Type in Ada.Streams 13.13.1(3/2) Root_Subpool in System.Storage_Pools.Subpools 13.11.4(5/3) RPC_Receiver in System.RPC E.5(11) Search_Type in Ada.Directories A.16(31/2) Second_Duration subtype of Day_Duration in Ada.Calendar.Formatting 9.6.1(20/2) Second_Number subtype of Natural in Ada.Calendar.Formatting 9.6.1(20/2) Seconds_Count in Ada.Real_Time D.8(15) Set in Ada.Containers.Hashed_Sets A.18.8(3/3) in Ada.Containers.Ordered_Sets A.18.9(4/3) short in Interfaces.C B.3(7) signed_char in Interfaces.C B.3(8) size_t in Interfaces.C B.3(13) State in Ada.Numerics.Discrete_Random A.5.2(23) in Ada.Numerics.Float_Random A.5.2(11) Storage_Array in System.Storage_Elements 13.7.1(5) Storage_Count subtype of Storage_Offset in System.Storage_Elements 13.7.1(4) Storage_Element in System.Storage_Elements 13.7.1(5) Storage_Offset in System.Storage_Elements 13.7.1(3) Stream_Access in Ada.Streams.Stream_IO A.12.1(4) in Ada.Text_IO.Text_Streams A.12.2(3) Q.2 Language-Defined Types and Subtypes 13 December 2012 848 Ada Reference Manual — 2012 Edition in Ada.Wide_Text_IO.Text_Streams A.12.3(3) in Ada.Wide_Wide_Text_IO.Text_Streams A.12.4(3/2) Stream_Element in Ada.Streams 13.13.1(4/1) Stream_Element_Array in Ada.Streams 13.13.1(4/1) Stream_Element_Count subtype of Stream_Element_Offset in Ada.Streams 13.13.1(4/1) Stream_Element_Offset in Ada.Streams 13.13.1(4/1) String in Standard A.1(37/3) String_Access in Ada.Strings.Unbounded A.4.5(7) Subpool_Handle in System.Storage_Pools.Subpools 13.11.4(6/3) Suspension_Object in Ada.Synchronous_Task_Control D.10(4) Synchronous_Barrier in Ada.Synchronous_Barriers D.10.1(5/3) Tag in Ada.Tags 3.9(6/2) Tag_Array in Ada.Tags 3.9(7.3/2) Task_Array in Ada.Execution_Time.Group_Budgets D.14.2(6/2) Task_Id in Ada.Task_Identification C.7.1(2/2) Termination_Handler in Ada.Task_Termination C.7.3(4/2) Time in Ada.Calendar 9.6(10) in Ada.Real_Time D.8(4) Time_Offset in Ada.Calendar.Time_Zones 9.6.1(4/2) Time_Span in Ada.Real_Time D.8(5) Timer in Ada.Execution_Time.Timers D.14.1(4/2) Timer_Handler in Ada.Execution_Time.Timers D.14.1(5/2) Timing_Event in Ada.Real_Time.Timing_Events D.15(4/2) Timing_Event_Handler in Ada.Real_Time.Timing_Events D.15(4/2) Tree in Ada.Containers.Multiway_Trees A.18.10(8/3) Trim_End in Ada.Strings A.4.1(6) Truncation in Ada.Strings A.4.1(6) Type_Set in Ada.Text_IO A.10.1(7) Unbounded_String in Ada.Strings.Unbounded A.4.5(4/2) Uniformly_Distributed subtype of Float in Ada.Numerics.Float_Random A.5.2(8) unsigned in Interfaces.C B.3(9) unsigned_char in Interfaces.C B.3(10) unsigned_long in Interfaces.C B.3(9) unsigned_short in Interfaces.C B.3(9) UTF_16_Wide_String subtype of Wide_String in Ada.Strings.UTF_Encoding A.4.11(7/3) UTF_8_String subtype of String in Ada.Strings.UTF_Encoding A.4.11(6/3) UTF_String subtype of String in Ada.Strings.UTF_Encoding A.4.11(5/3) Vector in Ada.Containers.Vectors A.18.2(8/3) wchar_array in Interfaces.C B.3(33/3) wchar_t in Interfaces.C B.3(30/1) Wide_Character in Standard A.1(36.1/3) Wide_Character_Mapping in Ada.Strings.Wide_Maps A.4.7(20/2) Wide_Character_Mapping_Function in Ada.Strings.Wide_Maps A.4.7(26) Wide_Character_Range in Ada.Strings.Wide_Maps A.4.7(6) Wide_Character_Ranges in Ada.Strings.Wide_Maps A.4.7(7) Wide_Character_Sequence subtype of Wide_String in Ada.Strings.Wide_Maps A.4.7(16) Wide_Character_Set in Ada.Strings.Wide_Maps A.4.7(4/2) Wide_String in Standard A.1(41/3) Wide_Wide_Character in Standard A.1(36.2/3) Wide_Wide_Character_Mapping in Ada.Strings.Wide_Wide_Maps A.4.8(20/2) Wide_Wide_Character_Mapping_Function in Ada.Strings.Wide_Wide_Maps A.4.8(26/2) Wide_Wide_Character_Range in Ada.Strings.Wide_Wide_Maps A.4.8(6/2) Wide_Wide_Character_Ranges in Ada.Strings.Wide_Wide_Maps A.4.8(7/2) Wide_Wide_Character_Sequence subtype of Wide_Wide_String in Ada.Strings.Wide_Wide_Maps A.4.8(16/2) Wide_Wide_Character_Set in Ada.Strings.Wide_Wide_Maps A.4.8(4/2) Wide_Wide_String in Standard A.1(42.1/3) Year_Number subtype of Integer in Ada.Calendar 9.6(11/2) 849 13 December 2012 Language-Defined Types and Subtypes Q.2 Ada Reference Manual — 2012 Edition Q.3 Language-Defined Subprograms 1/3 This subclause lists all language-defined subprograms. Abort_Task in Ada.Task_Identification C.7.1(3/3) Activation_Is_Complete in Ada.Task_Identification C.7.1(4/3) Actual_Quantum in Ada.Dispatching.Round_Robin D.2.5(4/2) Ada.Unchecked_Deallocate_Subpool child of Ada 13.11.5(3/3) Add in Ada.Execution_Time.Group_Budgets D.14.2(9/2) Add_Task in Ada.Execution_Time.Group_Budgets D.14.2(8/2) Adjust in Ada.Finalization 7.6(6/2) Allocate in System.Storage_Pools 13.11(7) in System.Storage_Pools.Subpools 13.11.4(14/3) Allocate_From_Subpool in System.Storage_Pools.Subpools 13.11.4(11/3) Ancestor_Find in Ada.Containers.Multiway_Trees A.18.10(40/3) Append in Ada.Containers.Doubly_Linked_Lists A.18.3(23/2) in Ada.Containers.Vectors A.18.2(46/2), A.18.2(47/2) in Ada.Strings.Bounded A.4.4(13), A.4.4(14), A.4.4(15), A.4.4(16), A.4.4(17), A.4.4(18), A.4.4(19), A.4.4(20) in Ada.Strings.Unbounded A.4.5(12), A.4.5(13), A.4.5(14) Append_Child in Ada.Containers.Multiway_Trees A.18.10(52/3) Arccos in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(5) in Ada.Numerics.Generic_Elementary_Functions A.5.1(6) Arccosh in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(7) in Ada.Numerics.Generic_Elementary_Functions A.5.1(7) Arccot in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(5) in Ada.Numerics.Generic_Elementary_Functions A.5.1(6) Arccoth in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(7) in Ada.Numerics.Generic_Elementary_Functions A.5.1(7) Arcsin in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(5) in Ada.Numerics.Generic_Elementary_Functions A.5.1(6) Arcsinh in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(7) in Ada.Numerics.Generic_Elementary_Functions A.5.1(7) Arctan in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(5) in Ada.Numerics.Generic_Elementary_Functions A.5.1(6) Arctanh in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(7) in Ada.Numerics.Generic_Elementary_Functions A.5.1(7) Argument in Ada.Command_Line A.15(5) in Ada.Numerics.Generic_Complex_Arrays G.3.2(10/2), G.3.2(31/2) in Ada.Numerics.Generic_Complex_Types G.1.1(10) Argument_Count in Ada.Command_Line A.15(4) Assert in Ada.Assertions 11.4.2(14/2) Assign in Ada.Containers.Doubly_Linked_Lists A.18.3(17.5/3) in Ada.Containers.Hashed_Maps A.18.5(17.7/3) in Ada.Containers.Hashed_Sets A.18.8(17.3/3) in Ada.Containers.Indefinite_Holders A.18.18(20/3) in Ada.Containers.Multiway_Trees A.18.10(32/3) in Ada.Containers.Ordered_Maps A.18.6(16.7/3) in Ada.Containers.Ordered_Sets A.18.9(16.3/3) in Ada.Containers.Vectors A.18.2(34.7/3) Assign_Task in System.Multiprocessors.Dispatching_Domains D.16.1(11/3) Attach_Handler in Ada.Interrupts C.3.2(7) Base_Name in Ada.Directories A.16(19/2) Blank_When_Zero in Ada.Text_IO.Editing F.3.3(7) Bounded_Slice in Ada.Strings.Bounded A.4.4(28.1/2), A.4.4(28.2/2) Budget_Has_Expired in Ada.Execution_Time.Group_Budgets D.14.2(9/2) Budget_Remaining in Ada.Execution_Time.Group_Budgets D.14.2(9/2) Cancel_Handler in Ada.Execution_Time.Group_Budgets D.14.2(10/2) in Ada.Execution_Time.Timers D.14.1(7/2) in Ada.Real_Time.Timing_Events D.15(5/2) Capacity in Ada.Containers.Hashed_Maps A.18.5(8/2) in Ada.Containers.Hashed_Sets A.18.8(10/2) in Ada.Containers.Vectors A.18.2(19/2) Ceiling in Ada.Containers.Ordered_Maps A.18.6(41/2) in Ada.Containers.Ordered_Sets A.18.9(51/2), A.18.9(71/2) Character_Set_Version in Ada.Wide_Characters.Handling A.3.5(4/3) Child_Count in Ada.Containers.Multiway_Trees A.18.10(46/3) Q.3 Language-Defined Subprograms 13 December 2012 850 Ada Reference Manual — 2012 Edition Child_Depth in Ada.Containers.Multiway_Trees A.18.10(47/3) Clear in Ada.Containers.Doubly_Linked_Lists A.18.3(13/2) in Ada.Containers.Hashed_Maps A.18.5(12/2) in Ada.Containers.Hashed_Sets A.18.8(14/2) in Ada.Containers.Indefinite_Holders A.18.18(11/3) in Ada.Containers.Multiway_Trees A.18.10(23/3) in Ada.Containers.Ordered_Maps A.18.6(11/2) in Ada.Containers.Ordered_Sets A.18.9(13/2) in Ada.Containers.Vectors A.18.2(24/2) in Ada.Environment_Variables A.17(7/2) Clock in Ada.Calendar 9.6(12) in Ada.Execution_Time D.14(5/2) in Ada.Execution_Time.Interrupts D.14.3(3/3) in Ada.Real_Time D.8(6) Clock_For_Interrupts in Ada.Execution_Time D.14(9.3/3) Close in Ada.Direct_IO A.8.4(8) in Ada.Sequential_IO A.8.1(8) in Ada.Streams.Stream_IO A.12.1(10) in Ada.Text_IO A.10.1(11) Col in Ada.Text_IO A.10.1(37) Command_Name in Ada.Command_Line A.15(6) Compose in Ada.Directories A.16(20/2) in Ada.Directories.Hierarchical_File_Names A.16.1(14/3) Compose_From_Cartesian in Ada.Numerics.Generic_Complex_Arrays G.3.2(9/2), G.3.2(29/2) in Ada.Numerics.Generic_Complex_Types G.1.1(8) Compose_From_Polar in Ada.Numerics.Generic_Complex_Arrays G.3.2(11/2), G.3.2(32/2) in Ada.Numerics.Generic_Complex_Types G.1.1(11) Conjugate in Ada.Numerics.Generic_Complex_Arrays G.3.2(13/2), G.3.2(34/2) Contains in Ada.Containers.Doubly_Linked_Lists A.18.3(43/2) in Ada.Containers.Hashed_Maps A.18.5(32/2) in Ada.Containers.Hashed_Sets A.18.8(44/2), A.18.8(57/2) in Ada.Containers.Multiway_Trees A.18.10(41/3) in Ada.Containers.Ordered_Maps A.18.6(42/2) in Ada.Containers.Ordered_Sets A.18.9(52/2), A.18.9(72/2) in Ada.Containers.Vectors A.18.2(71/2) Continue in Ada.Asynchronous_Task_Control D.11(3/2) Convert in Ada.Strings.UTF_Encoding.Conversions A.4.11(16/3), A.4.11(17/3), A.4.11(18/3), A.4.11(19/3), A.4.11(20/3) Copy in Ada.Containers.Doubly_Linked_Lists A.18.3(17.6/3) in Ada.Containers.Hashed_Maps A.18.5(17.8/3) in Ada.Containers.Hashed_Sets A.18.8(17.4/3) in Ada.Containers.Indefinite_Holders A.18.18(21/3), A.18.20(10/3), A.18.21(13/3), A.18.22(10/3), A.18.23(13/3), A.18.24(10/3) in Ada.Containers.Multiway_Trees A.18.10(33/3) in Ada.Containers.Ordered_Maps A.18.6(16.8/3) in Ada.Containers.Ordered_Sets A.18.9(16.4/3) in Ada.Containers.Vectors A.18.2(34.8/3) Copy_Array in Interfaces.C.Pointers B.3.2(15) Copy_File in Ada.Directories A.16(13/2) Copy_Subtree in Ada.Containers.Multiway_Trees A.18.10(54/3) Copy_Terminated_Array in Interfaces.C.Pointers B.3.2(14) Cos in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(4) in Ada.Numerics.Generic_Elementary_Functions A.5.1(5) Cosh in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(6) in Ada.Numerics.Generic_Elementary_Functions A.5.1(7) Cot in Ada.Numerics.Generic_Complex_Elementary_Functions in Ada.Numerics.Generic_Complex_Types G.1.1(12), G.1.2(4) G.1.1(15) Constant_Reference in Ada.Containers.Doubly_Linked_Lists A.18.3(17.3/3) in Ada.Containers.Hashed_Maps A.18.5(17.3/3), A.18.5(17.5/3) in Ada.Containers.Hashed_Sets A.18.8(17.2/3), A.18.8(58.3/3) in Ada.Containers.Indefinite_Holders A.18.18(18/3) in Ada.Containers.Multiway_Trees A.18.10(30/3) in Ada.Containers.Ordered_Maps A.18.6(16.3/3), A.18.6(16.5/3) in Ada.Containers.Ordered_Sets A.18.9(16.2/3), A.18.9(73.3/3) in Ada.Containers.Vectors A.18.2(34.3/3), A.18.2(34.5/3) Containing_Directory in Ada.Directories A.16(17/2) in Ada.Directories.Hierarchical_File_Names A.16.1(11/3) in Ada.Numerics.Generic_Elementary_Functions A.5.1(5) Coth in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(6) in Ada.Numerics.Generic_Elementary_Functions A.5.1(7) Count in Ada.Strings.Bounded A.4.4(48), A.4.4(49), A.4.4(50) in Ada.Strings.Fixed A.4.3(13), A.4.3(14), A.4.3(15) in Ada.Strings.Unbounded A.4.5(43), A.4.5(44), A.4.5(45) Country in Ada.Locales A.19(6/3) Create in Ada.Direct_IO A.8.4(6) in Ada.Sequential_IO A.8.1(6) in Ada.Streams.Stream_IO A.12.1(8) in Ada.Text_IO A.10.1(9) in System.Multiprocessors.Dispatching_Domains D.16.1(7/3) Create_Directory in Ada.Directories A.16(7/2) Create_Path in Ada.Directories A.16(9/2) 851 13 December 2012 Language-Defined Subprograms Q.3 Ada Reference Manual — 2012 Edition Create_Subpool in System.Storage_Pools.Subpools 13.11.4(7/3) Current_Directory in Ada.Directories A.16(5/2) Current_Error in Ada.Text_IO A.10.1(17), A.10.1(20) Current_Handler in Ada.Execution_Time.Group_Budgets D.14.2(10/2) in Ada.Execution_Time.Timers D.14.1(7/2) in Ada.Interrupts C.3.2(6) in Ada.Real_Time.Timing_Events D.15(5/2) Current_Input in Ada.Text_IO A.10.1(17), A.10.1(20) Current_Output in Ada.Text_IO A.10.1(17), A.10.1(20) Current_State in Ada.Synchronous_Task_Control D.10(4) Current_Task in Ada.Task_Identification C.7.1(3/3) Current_Task_Fallback_Handler in Ada.Task_Termination C.7.3(5/2) Current_Use in Ada.Containers.Bounded_Priority_Queues A.18.31(7/3) in Ada.Containers.Bounded_Synchronized_Queues A.18.29(6/3) in Ada.Containers.Synchronized_Queue_Interfaces A.18.27(7/3) in Ada.Containers.Unbounded_Priority_Queues A.18.30(7/3) in Ada.Containers.Unbounded_Synchronized_Queues A.18.28(6/3) Day in Ada.Calendar 9.6(13) in Ada.Calendar.Formatting 9.6.1(23/2) Day_of_Week in Ada.Calendar.Formatting 9.6.1(18/2) Deallocate in System.Storage_Pools 13.11(8) in System.Storage_Pools.Subpools 13.11.4(15/3) Deallocate_Subpool in System.Storage_Pools.Subpools 13.11.4(12/3) Decode in Ada.Strings.UTF_Encoding.Strings A.4.11(26/3), in Ada.Containers.Ordered_Maps A.18.6(24/2), A.18.6(25/2) in Ada.Containers.Ordered_Sets A.18.9(23/2), A.18.9(24/2), A.18.9(68/2) in Ada.Containers.Vectors A.18.2(50/2), A.18.2(51/2) in Ada.Direct_IO A.8.4(8) in Ada.Sequential_IO A.8.1(8) in Ada.Streams.Stream_IO A.12.1(10) in Ada.Strings.Bounded A.4.4(64), A.4.4(65) in Ada.Strings.Fixed A.4.3(29), A.4.3(30) in Ada.Strings.Unbounded A.4.5(59), A.4.5(60) in Ada.Text_IO A.10.1(11) Delete_Children in Ada.Containers.Multiway_Trees A.18.10(53/3) Delete_Directory in Ada.Directories A.16(8/2) Delete_File in Ada.Directories A.16(11/2) Delete_First in Ada.Containers.Doubly_Linked_Lists A.18.3(25/2) in Ada.Containers.Ordered_Maps A.18.6(26/2) in Ada.Containers.Ordered_Sets A.18.9(25/2) in Ada.Containers.Vectors A.18.2(52/2) Delete_Last in Ada.Containers.Doubly_Linked_Lists A.18.3(26/2) in Ada.Containers.Ordered_Maps A.18.6(27/2) in Ada.Containers.Ordered_Sets A.18.9(26/2) in Ada.Containers.Vectors A.18.2(53/2) Delete_Leaf in Ada.Containers.Multiway_Trees A.18.10(35/3) Delete_Subtree in Ada.Containers.Multiway_Trees A.18.10(36/3) Delete_Tree in Ada.Directories A.16(10/2) Depth in Ada.Containers.Multiway_Trees A.18.10(19/3) Dequeue in Ada.Containers.Bounded_Priority_Queues A.18.31(5/3) in Ada.Containers.Bounded_Synchronized_Queues A.18.29(5/3) in Ada.Containers.Synchronized_Queue_Interfaces A.18.27(6/3) A.4.11(27/3), A.4.11(28/3) in Ada.Containers.Unbounded_Priority_Queues in Ada.Strings.UTF_Encoding.Wide_Strings A.4.11(34/3), A.18.30(5/3) A.4.11(35/3), A.4.11(36/3) in Ada.Containers.Unbounded_Synchronized_Queues in Ada.Strings.UTF_Encoding.Wide_Wide_Strings A.18.28(5/3) A.4.11(42/3), A.4.11(43/3), A.4.11(44/3) Decrement in Interfaces.C.Pointers B.3.2(11/3) Default_Modulus in Ada.Containers.Indefinite_Holders A.18.21(10/3), A.18.23(10/3) Default_Subpool_for_Pool in System.Storage_Pools.Subpools 13.11.4(13/3) Delay_Until_And_Set_CPU in System.Multiprocessors.Dispatching_Domains D.16.1(14/3) Delay_Until_And_Set_Deadline in Ada.Dispatching.EDF D.2.6(9/2) Delete in Ada.Containers.Doubly_Linked_Lists A.18.3(24/2) in Ada.Containers.Hashed_Maps A.18.5(25/2), A.18.5(26/2) in Ada.Containers.Hashed_Sets A.18.8(24/2), A.18.8(25/2), A.18.8(55/2) Dequeue_Only_High_Priority in Ada.Containers.Bounded_Priority_Queues A.18.31(6/3) in Ada.Containers.Unbounded_Priority_Queues A.18.30(6/3) Dereference_Error in Interfaces.C.Strings B.3.1(12) Descendant_Tag in Ada.Tags 3.9(7.1/2) Detach_Handler in Ada.Interrupts C.3.2(9) Determinant in Ada.Numerics.Generic_Complex_Arrays G.3.2(46/2) in Ada.Numerics.Generic_Real_Arrays G.3.1(24/2) Difference in Ada.Calendar.Arithmetic 9.6.1(12/2) in Ada.Containers.Hashed_Sets A.18.8(32/2), A.18.8(33/2) in Ada.Containers.Ordered_Sets A.18.9(33/2), A.18.9(34/2) Divide in Ada.Decimal F.2(6/3) Do_APC in System.RPC E.5(10) Q.3 Language-Defined Subprograms 13 December 2012 852 Ada Reference Manual — 2012 Edition Do_RPC in System.RPC E.5(9) Eigensystem in Ada.Numerics.Generic_Complex_Arrays G.3.2(49/2) in Ada.Numerics.Generic_Real_Arrays G.3.1(27/2) Eigenvalues in Ada.Numerics.Generic_Complex_Arrays G.3.2(48/2) in Ada.Numerics.Generic_Real_Arrays G.3.1(26/2) Element in Ada.Containers.Doubly_Linked_Lists A.18.3(14/2) in Ada.Containers.Hashed_Maps A.18.5(14/2), A.18.5(31/2) in Ada.Containers.Hashed_Sets A.18.8(15/2), A.18.8(52/2) in Ada.Containers.Indefinite_Holders A.18.18(12/3) in Ada.Containers.Multiway_Trees A.18.10(24/3) in Ada.Containers.Ordered_Maps A.18.6(13/2), A.18.6(39/2) in Ada.Containers.Ordered_Sets A.18.9(14/2), A.18.9(65/2) in Ada.Containers.Vectors A.18.2(27/2), A.18.2(28/2) in Ada.Strings.Bounded A.4.4(26) in Ada.Strings.Unbounded A.4.5(20) Encode in Ada.Strings.UTF_Encoding.Strings A.4.11(23/3), A.4.11(24/3), A.4.11(25/3) in Ada.Strings.UTF_Encoding.Wide_Strings A.4.11(31/3), A.4.11(32/3), A.4.11(33/3) in Ada.Strings.UTF_Encoding.Wide_Wide_Strings Equivalent_Keys in Ada.Containers.Hashed_Maps A.18.5(34/2), A.18.5(35/2), A.18.5(36/2) in Ada.Containers.Ordered_Maps A.18.6(3/2) in Ada.Containers.Ordered_Sets A.18.9(63/2) Equivalent_Sets in Ada.Containers.Hashed_Sets A.18.8(8/2) in Ada.Containers.Ordered_Sets A.18.9(9/2) Establish_RPC_Receiver in System.RPC E.5(12) Exception_Identity in Ada.Exceptions 11.4.1(5/2) Exception_Information in Ada.Exceptions 11.4.1(5/2) Exception_Message in Ada.Exceptions 11.4.1(4/3) Exception_Name in Ada.Exceptions 11.4.1(2/2), 11.4.1(5/2) Exchange_Handler in Ada.Interrupts C.3.2(8) Exclude in Ada.Containers.Hashed_Maps A.18.5(24/2) in Ada.Containers.Hashed_Sets A.18.8(23/2), A.18.8(54/2) in Ada.Containers.Ordered_Maps A.18.6(23/2) in Ada.Containers.Ordered_Sets A.18.9(22/2), A.18.9(67/2) Exists in Ada.Directories A.16(24/2) in Ada.Environment_Variables A.17(5/2) Exp in Ada.Numerics.Generic_Complex_Elementary_Functions A.4.11(39/3), A.4.11(40/3), A.4.11(41/3) G.1.2(3) Encoding in Ada.Strings.UTF_Encoding A.4.11(13/3) End_Of_File in Ada.Direct_IO A.8.4(16) in Ada.Sequential_IO A.8.1(13) in Ada.Streams.Stream_IO A.12.1(12) in Ada.Text_IO A.10.1(34) End_Of_Line in Ada.Text_IO A.10.1(30) End_Of_Page in Ada.Text_IO A.10.1(33) End_Search in Ada.Directories A.16(33/2) Enqueue in Ada.Containers.Bounded_Priority_Queues A.18.31(5/3) in Ada.Containers.Bounded_Synchronized_Queues A.18.29(5/3) in Ada.Containers.Synchronized_Queue_Interfaces A.18.27(5/3) in Ada.Containers.Unbounded_Priority_Queues A.18.30(5/3) in Ada.Containers.Unbounded_Synchronized_Queues A.18.28(5/3) Environment_Task in Ada.Task_Identification C.7.1(3/3) Equal_Case_Insensitive child of Ada.Strings A.4.10(2/3) child of Ada.Strings.Bounded A.4.10(7/3) child of Ada.Strings.Fixed A.4.10(5/3) child of Ada.Strings.Unbounded A.4.10(10/3) Equal_Subtree in Ada.Containers.Multiway_Trees A.18.10(14/3) Equivalent_Elements in Ada.Containers.Hashed_Sets A.18.8(46/2), A.18.8(47/2), A.18.8(48/2) in Ada.Containers.Ordered_Sets A.18.9(3/2) in Ada.Numerics.Generic_Elementary_Functions A.5.1(4) Expanded_Name in Ada.Tags 3.9(7/2) Extension in Ada.Directories A.16(18/2) External_Tag in Ada.Tags 3.9(7/2) Finalize in Ada.Finalization 7.6(6/2), 7.6(8/2) Find in Ada.Containers.Doubly_Linked_Lists A.18.3(41/2) in Ada.Containers.Hashed_Maps A.18.5(30/2) in Ada.Containers.Hashed_Sets A.18.8(43/2), A.18.8(56/2) in Ada.Containers.Multiway_Trees A.18.10(38/3) in Ada.Containers.Ordered_Maps A.18.6(38/2) in Ada.Containers.Ordered_Sets A.18.9(49/2), A.18.9(69/2) in Ada.Containers.Vectors A.18.2(68/2) Find_In_Subtree in Ada.Containers.Multiway_Trees A.18.10(39/3) Find_Index in Ada.Containers.Vectors A.18.2(67/2) Find_Token in Ada.Strings.Bounded A.4.4(50.1/3), A.4.4(51) in Ada.Strings.Fixed A.4.3(15.1/3), A.4.3(16) in Ada.Strings.Unbounded A.4.5(45.1/3), A.4.5(46) First in Ada.Containers.Doubly_Linked_Lists A.18.3(33/2) in Ada.Containers.Hashed_Maps A.18.5(27/2) in Ada.Containers.Hashed_Sets A.18.8(40/2) in Ada.Containers.Ordered_Maps A.18.6(28/2) in Ada.Containers.Ordered_Sets A.18.9(41/2) in Ada.Containers.Vectors A.18.2(58/2) in Ada.Iterator_Interfaces 5.5.1(3/3) First_Child in Ada.Containers.Multiway_Trees A.18.10(60/3) First_Child_Element in Ada.Containers.Multiway_Trees A.18.10(61/3) 853 13 December 2012 Language-Defined Subprograms Q.3 Ada Reference Manual — 2012 Edition First_Element in Ada.Containers.Doubly_Linked_Lists A.18.3(34/2) in Ada.Containers.Ordered_Maps A.18.6(29/2) in Ada.Containers.Ordered_Sets A.18.9(42/2) in Ada.Containers.Vectors A.18.2(59/2) First_Index in Ada.Containers.Vectors A.18.2(57/2) First_Key in Ada.Containers.Ordered_Maps A.18.6(30/2) Floor in Ada.Containers.Ordered_Maps A.18.6(40/2) in Ada.Containers.Ordered_Sets A.18.9(50/2), A.18.9(70/2) Flush in Ada.Streams.Stream_IO A.12.1(25/1) in Ada.Text_IO A.10.1(21/1) Form in Ada.Direct_IO A.8.4(9) in Ada.Sequential_IO A.8.1(9) in Ada.Streams.Stream_IO A.12.1(11) in Ada.Text_IO A.10.1(12) Free in Ada.Strings.Unbounded A.4.5(7) in Interfaces.C.Strings B.3.1(11) Full_Name in Ada.Directories A.16(15/2), A.16(39/2) Generic_Array_Sort child of Ada.Containers A.18.26(3/2) Generic_Constrained_Array_Sort child of Ada.Containers A.18.26(7/2) Generic_Sort child of Ada.Containers A.18.26(9.2/3) Get in Ada.Text_IO A.10.1(41), A.10.1(47), A.10.1(54), A.10.1(55), A.10.1(59), A.10.1(60), A.10.1(65), A.10.1(67), A.10.1(70), A.10.1(72), A.10.1(75), A.10.1(77), A.10.1(81), A.10.1(83) in Ada.Text_IO.Complex_IO G.1.3(6), G.1.3(8) Get_CPU in Ada.Interrupts C.3.2(10.1/3) in System.Multiprocessors.Dispatching_Domains D.16.1(13/3) Get_Deadline in Ada.Dispatching.EDF D.2.6(9/2) Get_Dispatching_Domain in System.Multiprocessors.Dispatching_Domains D.16.1(10/3) Get_First_CPU in System.Multiprocessors.Dispatching_Domains D.16.1(8/3) Get_Immediate in Ada.Text_IO A.10.1(44), A.10.1(45) Get_Last_CPU in System.Multiprocessors.Dispatching_Domains D.16.1(9/3) Get_Line in Ada.Text_IO A.10.1(49), A.10.1(49.1/2) in Ada.Text_IO.Bounded_IO A.10.11(8/2), A.10.11(9/2), A.10.11(10/2), A.10.11(11/2) in Ada.Text_IO.Unbounded_IO A.10.12(8/2), A.10.12(9/2), A.10.12(10/2), A.10.12(11/2) Get_Next_Entry in Ada.Directories A.16(35/2) Get_Priority in Ada.Dynamic_Priorities D.5.1(5) Has_Element in Ada.Containers.Doubly_Linked_Lists A.18.3(9.1/3) in Ada.Containers.Hashed_Maps A.18.5(6.1/3) in Ada.Containers.Hashed_Sets A.18.8(6.1/3) in Ada.Containers.Multiway_Trees A.18.10(12/3) in Ada.Containers.Ordered_Maps A.18.6(7.1/3) in Ada.Containers.Ordered_Sets A.18.9(7.1/3) in Ada.Containers.Vectors A.18.2(11.1/3) Hash child of Ada.Strings A.4.9(2/3) child of Ada.Strings.Bounded A.4.9(7/3) child of Ada.Strings.Unbounded A.4.9(10/3) Hash_Case_Insensitive child of Ada.Strings A.4.9(11.2/3) child of Ada.Strings.Bounded A.4.9(11.7/3) child of Ada.Strings.Fixed A.4.9(11.5/3) child of Ada.Strings.Unbounded A.4.9(11.10/3) Head in Ada.Strings.Bounded A.4.4(70), A.4.4(71) in Ada.Strings.Fixed A.4.3(35), A.4.3(36) in Ada.Strings.Unbounded A.4.5(65), A.4.5(66) Hold in Ada.Asynchronous_Task_Control D.11(3/2) Hour in Ada.Calendar.Formatting 9.6.1(24/2) Im in Ada.Numerics.Generic_Complex_Arrays G.3.2(7/2), G.3.2(27/2) in Ada.Numerics.Generic_Complex_Types G.1.1(6) Image in Ada.Calendar.Formatting 9.6.1(35/2), 9.6.1(37/2) in Ada.Numerics.Discrete_Random A.5.2(26) in Ada.Numerics.Float_Random A.5.2(14) in Ada.Task_Identification C.7.1(3/3) in Ada.Text_IO.Editing F.3.3(13) Include in Ada.Containers.Hashed_Maps A.18.5(22/2) in Ada.Containers.Hashed_Sets A.18.8(21/2) in Ada.Containers.Ordered_Maps A.18.6(21/2) in Ada.Containers.Ordered_Sets A.18.9(20/2) Increment in Interfaces.C.Pointers B.3.2(11/3) Index in Ada.Direct_IO A.8.4(15) in Ada.Streams.Stream_IO A.12.1(23) in Ada.Strings.Bounded A.4.4(43.1/2), A.4.4(43.2/2), A.4.4(44), A.4.4(45), A.4.4(45.1/2), A.4.4(46) in Ada.Strings.Fixed A.4.3(8.1/2), A.4.3(8.2/2), A.4.3(9), A.4.3(10), A.4.3(10.1/2), A.4.3(11) in Ada.Strings.Unbounded A.4.5(38.1/2), A.4.5(38.2/2), A.4.5(39), A.4.5(40), A.4.5(40.1/2), A.4.5(41) Index_Non_Blank in Ada.Strings.Bounded A.4.4(46.1/2), A.4.4(47) in Ada.Strings.Fixed A.4.3(11.1/2), A.4.3(12) in Ada.Strings.Unbounded A.4.5(41.1/2), A.4.5(42) Initial_Directory in Ada.Directories.Hierarchical_File_Names A.16.1(12/3) Initialize in Ada.Finalization 7.6(6/2), 7.6(8/2) Insert in Ada.Containers.Doubly_Linked_Lists A.18.3(19/2), A.18.3(20/2), A.18.3(21/2) in Ada.Containers.Hashed_Maps A.18.5(19/2), A.18.5(20/2), A.18.5(21/2) Q.3 Language-Defined Subprograms 13 December 2012 854 Ada Reference Manual — 2012 Edition in Ada.Containers.Hashed_Sets A.18.8(19/2), A.18.8(20/2) in Ada.Containers.Ordered_Maps A.18.6(18/2), A.18.6(19/2), A.18.6(20/2) in Ada.Containers.Ordered_Sets A.18.9(18/2), A.18.9(19/2) in Ada.Containers.Vectors A.18.2(36/2), A.18.2(37/2), A.18.2(38/2), A.18.2(39/2), A.18.2(40/2), A.18.2(41/2), A.18.2(42/2), A.18.2(43/2) in Ada.Strings.Bounded A.4.4(60), A.4.4(61) in Ada.Strings.Fixed A.4.3(25), A.4.3(26) in Ada.Strings.Unbounded A.4.5(55), A.4.5(56) Insert_Child in Ada.Containers.Multiway_Trees A.18.10(48/3), A.18.10(49/3), A.18.10(50/3) Insert_Space in Ada.Containers.Vectors A.18.2(48/2), A.18.2(49/2) Interface_Ancestor_Tags in Ada.Tags 3.9(7.4/2) Internal_Tag in Ada.Tags 3.9(7/2) Intersection in Ada.Containers.Hashed_Sets A.18.8(29/2), A.18.8(30/2) in Ada.Containers.Ordered_Sets A.18.9(30/2), A.18.9(31/2) Inverse in Ada.Numerics.Generic_Complex_Arrays G.3.2(46/2) in Ada.Numerics.Generic_Real_Arrays G.3.1(24/2) Is_A_Group_Member in Ada.Execution_Time.Group_Budgets D.14.2(8/2) Is_Abstract in Ada.Tags 3.9(7.5/3) Is_Alphanumeric in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(12/3) Is_Attached in Ada.Interrupts C.3.2(5) Is_Basic in Ada.Characters.Handling A.3.2(4/3) Is_Callable in Ada.Task_Identification C.7.1(4/3) Is_Character in Ada.Characters.Conversions A.3.4(3/2) Is_Control in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(5/3) Is_Current_Directory_Name in Ada.Directories.Hierarchical_File_Names A.16.1(7/3) Is_Decimal_Digit in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(10/3) Is_Descendant_At_Same_Level in Ada.Tags 3.9(7.1/2) Is_Digit in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(9/3) Is_Empty in Ada.Containers.Doubly_Linked_Lists A.18.3(12/2) in Ada.Containers.Hashed_Maps A.18.5(11/2) in Ada.Containers.Hashed_Sets A.18.8(13/2) in Ada.Containers.Indefinite_Holders A.18.18(10/3) in Ada.Containers.Multiway_Trees A.18.10(16/3) in Ada.Containers.Ordered_Maps A.18.6(10/2) in Ada.Containers.Ordered_Sets A.18.9(12/2) in Ada.Containers.Vectors A.18.2(23/2) Is_Full_Name in Ada.Directories.Hierarchical_File_Names A.16.1(8/3) Is_Graphic in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(19/3) Is_Held in Ada.Asynchronous_Task_Control D.11(3/2) Is_Hexadecimal_Digit in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(11/3) Is_In in Ada.Strings.Maps A.4.2(13) in Ada.Strings.Wide_Maps A.4.7(13) in Ada.Strings.Wide_Wide_Maps A.4.8(13/2) Is_ISO_646 in Ada.Characters.Handling A.3.2(10) Is_Leaf in Ada.Containers.Multiway_Trees A.18.10(21/3) Is_Letter in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(6/3) Is_Line_Terminator in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(14/3) Is_Lower in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(7/3) Is_Mark in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(15/3) Is_Member in Ada.Execution_Time.Group_Budgets D.14.2(8/2) Is_Nul_Terminated in Interfaces.C B.3(24), B.3(35), B.3(39.16/2), B.3(39.7/2) Is_Open in Ada.Direct_IO A.8.4(10) in Ada.Sequential_IO A.8.1(10) in Ada.Streams.Stream_IO A.12.1(12) in Ada.Text_IO A.10.1(13) Is_Other_Format in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(16/3) Is_Parent_Directory_Name in Ada.Directories.Hierarchical_File_Names A.16.1(6/3) Is_Punctuation_Connector in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(17/3) Is_Relative_Name in Ada.Directories.Hierarchical_File_Names A.16.1(9/3) Is_Reserved in Ada.Interrupts C.3.2(4) Is_Root in Ada.Containers.Multiway_Trees A.18.10(20/3) Is_Root_Directory_Name in Ada.Directories.Hierarchical_File_Names A.16.1(5/3) Is_Round_Robin in Ada.Dispatching.Round_Robin D.2.5(4/2) Is_Simple_Name in Ada.Directories.Hierarchical_File_Names A.16.1(4/3) Is_Sorted in Ada.Containers.Doubly_Linked_Lists A.18.3(48/2) in Ada.Containers.Vectors A.18.2(76/2) Is_Space in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(18/3) 855 13 December 2012 Language-Defined Subprograms Q.3 Ada Reference Manual — 2012 Edition Is_Special in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(13/3) Is_String in Ada.Characters.Conversions A.3.4(3/2) Is_Subset in Ada.Containers.Hashed_Sets A.18.8(39/2) in Ada.Containers.Ordered_Sets A.18.9(40/2) in Ada.Strings.Maps A.4.2(14) in Ada.Strings.Wide_Maps A.4.7(14) in Ada.Strings.Wide_Wide_Maps A.4.8(14/2) Is_Terminated in Ada.Task_Identification C.7.1(4/3) Is_Upper in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(8/3) Is_Wide_Character in Ada.Characters.Conversions A.3.4(3/2) Is_Wide_String in Ada.Characters.Conversions A.3.4(3/2) Iterate in Ada.Containers.Doubly_Linked_Lists A.18.3(45/2) in Ada.Containers.Hashed_Maps A.18.5(37/2) in Ada.Containers.Hashed_Sets A.18.8(49/2) in Ada.Containers.Multiway_Trees A.18.10(42/3), A.18.10(44/3) in Ada.Containers.Ordered_Maps A.18.6(50/2) in Ada.Containers.Ordered_Sets A.18.9(60/2) in Ada.Containers.Vectors A.18.2(73/2) in Ada.Environment_Variables A.17(8/3) Iterate_Children in Ada.Containers.Multiway_Trees A.18.10(68/3), A.18.10(70/3) Iterate_Subtree in Ada.Containers.Multiway_Trees A.18.10(43/3), A.18.10(45/3) Key in Ada.Containers.Hashed_Maps A.18.5(13/2) in Ada.Containers.Hashed_Sets A.18.8(51/2) in Ada.Containers.Ordered_Maps A.18.6(12/2) in Ada.Containers.Ordered_Sets A.18.9(64/2) Kind in Ada.Directories A.16(25/2), A.16(40/2) Language in Ada.Locales A.19(6/3) Last in Ada.Containers.Doubly_Linked_Lists A.18.3(35/2) in Ada.Containers.Ordered_Maps A.18.6(31/2) in Ada.Containers.Ordered_Sets A.18.9(43/2) in Ada.Containers.Vectors A.18.2(61/2) in Ada.Iterator_Interfaces 5.5.1(4/3) Last_Child in Ada.Containers.Multiway_Trees A.18.10(62/3) Last_Child_Element in Ada.Containers.Multiway_Trees A.18.10(63/3) Last_Element in Ada.Containers.Doubly_Linked_Lists A.18.3(36/2) in Ada.Containers.Ordered_Maps A.18.6(32/2) in Ada.Containers.Ordered_Sets A.18.9(44/2) in Ada.Containers.Vectors A.18.2(62/2) Last_Index in Ada.Containers.Vectors A.18.2(60/2) Last_Key in Ada.Containers.Ordered_Maps A.18.6(33/2) Length in Ada.Containers.Doubly_Linked_Lists A.18.3(11/2) in Ada.Containers.Hashed_Maps A.18.5(10/2) in Ada.Containers.Hashed_Sets A.18.8(12/2) in Ada.Containers.Ordered_Maps A.18.6(9/2) in Ada.Containers.Ordered_Sets A.18.9(11/2) in Ada.Containers.Vectors A.18.2(21/2) in Ada.Strings.Bounded A.4.4(9) in Ada.Strings.Unbounded A.4.5(6) in Ada.Text_IO.Editing F.3.3(11) in Interfaces.COBOL B.4(34), B.4(39), B.4(44) Less_Case_Insensitive child of Ada.Strings A.4.10(13/3) child of Ada.Strings.Bounded A.4.10(18/3) child of Ada.Strings.Fixed A.4.10(16/3) child of Ada.Strings.Unbounded A.4.10(21/3) Line in Ada.Text_IO A.10.1(38) Line_Length in Ada.Text_IO A.10.1(25) Log in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(3) in Ada.Numerics.Generic_Elementary_Functions A.5.1(4) Look_Ahead in Ada.Text_IO A.10.1(43) Members in Ada.Execution_Time.Group_Budgets D.14.2(8/2) Merge in Ada.Containers.Doubly_Linked_Lists A.18.3(50/2) in Ada.Containers.Vectors A.18.2(78/2) Microseconds in Ada.Real_Time D.8(14/2) Milliseconds in Ada.Real_Time D.8(14/2) Minute in Ada.Calendar.Formatting 9.6.1(25/2) Minutes in Ada.Real_Time D.8(14/2) Mode in Ada.Direct_IO A.8.4(9) in Ada.Sequential_IO A.8.1(9) in Ada.Streams.Stream_IO A.12.1(11) in Ada.Text_IO A.10.1(12) Modification_Time in Ada.Directories A.16(27/2), A.16(42/2) Modulus in Ada.Numerics.Generic_Complex_Arrays G.3.2(10/2), G.3.2(30/2) in Ada.Numerics.Generic_Complex_Types G.1.1(9) Month in Ada.Calendar 9.6(13) in Ada.Calendar.Formatting 9.6.1(22/2) More_Entries in Ada.Directories A.16(34/2) Move in Ada.Containers.Doubly_Linked_Lists A.18.3(18/2) in Ada.Containers.Hashed_Maps A.18.5(18/2) in Ada.Containers.Hashed_Sets A.18.8(18/2) in Ada.Containers.Indefinite_Holders A.18.18(22/3) in Ada.Containers.Multiway_Trees A.18.10(34/3) in Ada.Containers.Ordered_Maps A.18.6(17/2) in Ada.Containers.Ordered_Sets A.18.9(17/2) in Ada.Containers.Vectors A.18.2(35/2) in Ada.Strings.Fixed A.4.3(7) Name in Ada.Direct_IO A.8.4(9) Q.3 Language-Defined Subprograms 13 December 2012 856 in Ada.Sequential_IO A.8.1(9) in Ada.Streams.Stream_IO A.12.1(11) in Ada.Text_IO A.10.1(12) Name_Case_Equivalence in Ada.Directories A.16(20.2/3) Nanoseconds in Ada.Real_Time D.8(14/2) New_Char_Array in Interfaces.C.Strings B.3.1(9) New_Line in Ada.Text_IO A.10.1(28) New_Page in Ada.Text_IO A.10.1(31) New_String in Interfaces.C.Strings B.3.1(10) Next in Ada.Containers.Doubly_Linked_Lists A.18.3(37/2), A.18.3(39/2) in Ada.Containers.Hashed_Maps A.18.5(28/2), A.18.5(29/2) in Ada.Containers.Hashed_Sets A.18.8(41/2), A.18.8(42/2) in Ada.Containers.Ordered_Maps A.18.6(34/2), A.18.6(35/2) in Ada.Containers.Ordered_Sets A.18.9(45/2), A.18.9(46/2) in Ada.Containers.Vectors A.18.2(63/2), A.18.2(64/2) in Ada.Iterator_Interfaces 5.5.1(3/3) Next_Sibling in Ada.Containers.Multiway_Trees A.18.10(64/3), A.18.10(66/3) Node_Count in Ada.Containers.Multiway_Trees A.18.10(17/3) Null_Task_Id in Ada.Task_Identification C.7.1(2/2) Number_Of_CPUs in System.Multiprocessors D.16(5/3) Open in Ada.Direct_IO A.8.4(7) in Ada.Sequential_IO A.8.1(7) in Ada.Streams.Stream_IO A.12.1(9) in Ada.Text_IO A.10.1(10) Overlap in Ada.Containers.Hashed_Sets A.18.8(38/2) in Ada.Containers.Ordered_Sets A.18.9(39/2) Overwrite in Ada.Strings.Bounded A.4.4(62), A.4.4(63) in Ada.Strings.Fixed A.4.3(27), A.4.3(28) in Ada.Strings.Unbounded A.4.5(57), A.4.5(58) Page in Ada.Text_IO A.10.1(39) Page_Length in Ada.Text_IO A.10.1(26) Parent in Ada.Containers.Multiway_Trees A.18.10(59/3) Parent_Tag in Ada.Tags 3.9(7.2/2) Peak_Use in Ada.Containers.Bounded_Priority_Queues A.18.31(7/3) in Ada.Containers.Bounded_Synchronized_Queues A.18.29(6/3) in Ada.Containers.Synchronized_Queue_Interfaces A.18.27(7/3) in Ada.Containers.Unbounded_Priority_Queues A.18.30(7/3) Ada Reference Manual — 2012 Edition Prepend in Ada.Containers.Doubly_Linked_Lists A.18.3(22/2) in Ada.Containers.Vectors A.18.2(44/2), A.18.2(45/2) Prepend_Child in Ada.Containers.Multiway_Trees A.18.10(51/3) Previous in Ada.Containers.Doubly_Linked_Lists A.18.3(38/2), A.18.3(40/2) in Ada.Containers.Ordered_Maps A.18.6(36/2), A.18.6(37/2) in Ada.Containers.Ordered_Sets A.18.9(47/2), A.18.9(48/2) in Ada.Containers.Vectors A.18.2(65/2), A.18.2(66/2) in Ada.Iterator_Interfaces 5.5.1(4/3) Previous_Sibling in Ada.Containers.Multiway_Trees A.18.10(65/3), A.18.10(67/3) Put in Ada.Text_IO A.10.1(42), A.10.1(48), A.10.1(55), A.10.1(60), A.10.1(66), A.10.1(67), A.10.1(71), A.10.1(72), A.10.1(76), A.10.1(77), A.10.1(82), A.10.1(83) in Ada.Text_IO.Bounded_IO A.10.11(4/2), A.10.11(5/2) in Ada.Text_IO.Complex_IO G.1.3(7), G.1.3(8) in Ada.Text_IO.Editing F.3.3(14), F.3.3(15), F.3.3(16) in Ada.Text_IO.Unbounded_IO A.10.12(4/2), A.10.12(5/2) Put_Line in Ada.Text_IO A.10.1(50) in Ada.Text_IO.Bounded_IO A.10.11(6/2), A.10.11(7/2) in Ada.Text_IO.Unbounded_IO A.10.12(6/2), A.10.12(7/2) Query_Element in Ada.Containers.Doubly_Linked_Lists A.18.3(16/2) in Ada.Containers.Hashed_Maps A.18.5(16/2) in Ada.Containers.Hashed_Sets A.18.8(17/2) in Ada.Containers.Indefinite_Holders A.18.18(14/3) in Ada.Containers.Multiway_Trees A.18.10(26/3) in Ada.Containers.Ordered_Maps A.18.6(15/2) in Ada.Containers.Ordered_Sets A.18.9(16/2) in Ada.Containers.Vectors A.18.2(31/2), A.18.2(32/2) Raise_Exception in Ada.Exceptions 11.4.1(4/3) Random in Ada.Numerics.Discrete_Random A.5.2(20) in Ada.Numerics.Float_Random A.5.2(8) Re in Ada.Numerics.Generic_Complex_Arrays G.3.2(7/2), G.3.2(27/2) in Ada.Numerics.Generic_Complex_Types G.1.1(6) Read in Ada.Direct_IO A.8.4(12) in Ada.Sequential_IO A.8.1(12) in Ada.Storage_IO A.9(6) in Ada.Streams 13.13.1(5) in Ada.Streams.Stream_IO A.12.1(15), A.12.1(16) in System.RPC E.5(7) Reference in Ada.Containers.Doubly_Linked_Lists A.18.3(17.4/3) in Ada.Containers.Hashed_Maps A.18.5(17.4/3), in Ada.Containers.Unbounded_Synchronized_Queues A.18.5(17.6/3) A.18.28(6/3) Pic_String in Ada.Text_IO.Editing F.3.3(7) Pool_of_Subpool in System.Storage_Pools.Subpools 13.11.4(9/3) in Ada.Containers.Indefinite_Holders A.18.18(19/3) in Ada.Containers.Multiway_Trees A.18.10(31/3) in Ada.Containers.Ordered_Maps A.18.6(16.4/3), A.18.6(16.6/3) 857 13 December 2012 Language-Defined Subprograms Q.3 Ada Reference Manual — 2012 Edition in Ada.Containers.Vectors A.18.2(34.4/3), A.18.2(34.6/3) in Ada.Interrupts C.3.2(10) in Ada.Task_Attributes C.7.2(5) Reference_Preserving_Key in Ada.Containers.Hashed_Sets A.18.8(58.2/3), A.18.8(58.4/3) in Ada.Containers.Ordered_Sets A.18.9(73.2/3), A.18.9(73.4/3) Reinitialize in Ada.Task_Attributes C.7.2(6) Relative_Name in Ada.Directories.Hierarchical_File_Names A.16.1(13/3) Remove_Task in Ada.Execution_Time.Group_Budgets D.14.2(8/2) Rename in Ada.Directories A.16(12/2) Replace in Ada.Containers.Hashed_Maps A.18.5(23/2) in Ada.Containers.Hashed_Sets A.18.8(22/2), A.18.8(53/2) in Ada.Containers.Ordered_Maps A.18.6(22/2) in Ada.Containers.Ordered_Sets A.18.9(21/2), A.18.9(66/2) Replace_Element in Ada.Containers.Doubly_Linked_Lists A.18.3(15/2) in Ada.Containers.Hashed_Maps A.18.5(15/2) in Ada.Containers.Hashed_Sets A.18.8(16/2) in Ada.Containers.Indefinite_Holders A.18.18(13/3) in Ada.Containers.Multiway_Trees A.18.10(25/3) in Ada.Containers.Ordered_Maps A.18.6(14/2) in Ada.Containers.Ordered_Sets A.18.9(15/2) in Ada.Containers.Vectors A.18.2(29/2), A.18.2(30/2) in Ada.Strings.Bounded A.4.4(27) in Ada.Strings.Unbounded A.4.5(21) Replace_Slice in Ada.Strings.Bounded A.4.4(58), A.4.4(59) in Ada.Strings.Fixed A.4.3(23), A.4.3(24) in Ada.Strings.Unbounded A.4.5(53), A.4.5(54) Replenish in Ada.Execution_Time.Group_Budgets D.14.2(9/2) Replicate in Ada.Strings.Bounded A.4.4(78), A.4.4(79), A.4.4(80) Reraise_Occurrence in Ada.Exceptions 11.4.1(4/3) Reserve_Capacity in Ada.Containers.Hashed_Maps A.18.5(9/2) in Ada.Containers.Hashed_Sets A.18.8(11/2) in Ada.Containers.Vectors A.18.2(20/2) Reset in Ada.Direct_IO A.8.4(8) in Ada.Numerics.Discrete_Random A.5.2(21), A.5.2(24) in Ada.Numerics.Float_Random A.5.2(9), A.5.2(12) in Ada.Sequential_IO A.8.1(8) in Ada.Streams.Stream_IO A.12.1(10) in Ada.Text_IO A.10.1(11) Reverse_Elements in Ada.Containers.Doubly_Linked_Lists A.18.3(27/2) in Ada.Containers.Vectors A.18.2(54/2) Reverse_Find in Ada.Containers.Doubly_Linked_Lists A.18.3(42/2) in Ada.Containers.Vectors A.18.2(70/2) Reverse_Find_Index in Ada.Containers.Vectors A.18.2(69/2) Reverse_Iterate in Ada.Containers.Doubly_Linked_Lists A.18.3(46/2) in Ada.Containers.Ordered_Maps A.18.6(51/2) in Ada.Containers.Ordered_Sets A.18.9(61/2) in Ada.Containers.Vectors A.18.2(74/2) Reverse_Iterate_Children in Ada.Containers.Multiway_Trees A.18.10(69/3) Root in Ada.Containers.Multiway_Trees A.18.10(22/3) Save in Ada.Numerics.Discrete_Random A.5.2(24) in Ada.Numerics.Float_Random A.5.2(12) Save_Occurrence in Ada.Exceptions 11.4.1(6/2) Second in Ada.Calendar.Formatting 9.6.1(26/2) Seconds in Ada.Calendar 9.6(13) in Ada.Real_Time D.8(14/2) Seconds_Of in Ada.Calendar.Formatting 9.6.1(28/2) Set in Ada.Environment_Variables A.17(6/2) Set_Bounded_String in Ada.Strings.Bounded A.4.4(12.1/2) Set_Col in Ada.Text_IO A.10.1(35) Set_CPU in System.Multiprocessors.Dispatching_Domains D.16.1(12/3) Set_Deadline in Ada.Dispatching.EDF D.2.6(9/2) Set_Dependents_Fallback_Handler in Ada.Task_Termination C.7.3(5/2) Set_Directory in Ada.Directories A.16(6/2) Set_Error in Ada.Text_IO A.10.1(15) Set_Exit_Status in Ada.Command_Line A.15(9) Set_False in Ada.Synchronous_Task_Control D.10(4) Set_Handler in Ada.Execution_Time.Group_Budgets D.14.2(10/2) in Ada.Execution_Time.Timers D.14.1(7/2) in Ada.Real_Time.Timing_Events D.15(5/2) Set_Im in Ada.Numerics.Generic_Complex_Arrays G.3.2(8/2), G.3.2(28/2) in Ada.Numerics.Generic_Complex_Types G.1.1(7) Set_Index in Ada.Direct_IO A.8.4(14) in Ada.Streams.Stream_IO A.12.1(22) Set_Input in Ada.Text_IO A.10.1(15) Set_Length in Ada.Containers.Vectors A.18.2(22/2) Set_Line in Ada.Text_IO A.10.1(36) Set_Line_Length in Ada.Text_IO A.10.1(23) Set_Mode in Ada.Streams.Stream_IO A.12.1(24) Set_Output in Ada.Text_IO A.10.1(15) Set_Page_Length in Ada.Text_IO A.10.1(24) Set_Pool_of_Subpool in System.Storage_Pools.Subpools 13.11.4(10/3) Set_Priority in Ada.Dynamic_Priorities D.5.1(4) Set_Quantum in Ada.Dispatching.Round_Robin D.2.5(4/2) Set_Re in Ada.Numerics.Generic_Complex_Arrays G.3.2(8/2), G.3.2(28/2) in Ada.Numerics.Generic_Complex_Types G.1.1(7) Q.3 Language-Defined Subprograms 13 December 2012 858 Ada Reference Manual — 2012 Edition Set_Specific_Handler in Ada.Task_Termination C.7.3(6/2) Set_True in Ada.Synchronous_Task_Control D.10(4) Set_Unbounded_String in Ada.Strings.Unbounded A.4.5(11.1/2) Set_Value in Ada.Task_Attributes C.7.2(6) Simple_Name in Ada.Directories A.16(16/2), A.16(38/2) in Ada.Directories.Hierarchical_File_Names A.16.1(10/3) Sin in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(4) in Ada.Numerics.Generic_Elementary_Functions A.5.1(5) Sinh in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(6) in Ada.Numerics.Generic_Elementary_Functions A.5.1(7) Size in Ada.Direct_IO A.8.4(15) in Ada.Directories A.16(26/2), A.16(41/2) in Ada.Streams.Stream_IO A.12.1(23) Skip_Line in Ada.Text_IO A.10.1(29) Skip_Page in Ada.Text_IO A.10.1(32) Slice in Ada.Strings.Bounded A.4.4(28) in Ada.Strings.Unbounded A.4.5(22) Solve in Ada.Numerics.Generic_Complex_Arrays G.3.2(46/2) in Ada.Numerics.Generic_Real_Arrays G.3.1(24/2) Sort in Ada.Containers.Doubly_Linked_Lists A.18.3(49/2) in Ada.Containers.Vectors A.18.2(77/2) Specific_Handler in Ada.Task_Termination C.7.3(6/2) Splice in Ada.Containers.Doubly_Linked_Lists A.18.3(30/2), A.18.3(31/2), A.18.3(32/2) Splice_Children in Ada.Containers.Multiway_Trees A.18.10(57/3), A.18.10(58/3) Splice_Subtree in Ada.Containers.Multiway_Trees A.18.10(55/3), A.18.10(56/3) Split in Ada.Calendar 9.6(14) in Ada.Calendar.Formatting 9.6.1(29/2), 9.6.1(32/2), 9.6.1(33/2), 9.6.1(34/2) in Ada.Execution_Time D.14(8/2) in Ada.Real_Time D.8(16) Sqrt in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(3) in Ada.Numerics.Generic_Elementary_Functions A.5.1(4) Standard_Error in Ada.Text_IO A.10.1(16), A.10.1(19) Standard_Input in Ada.Text_IO A.10.1(16), A.10.1(19) Standard_Output in Ada.Text_IO A.10.1(16), A.10.1(19) Start_Search in Ada.Directories A.16(32/2) Storage_Size in System.Storage_Pools 13.11(9) in System.Storage_Pools.Subpools 13.11.4(16/3) Stream in Ada.Streams.Stream_IO A.12.1(13) in Ada.Text_IO.Text_Streams A.12.2(4) in Ada.Wide_Text_IO.Text_Streams A.12.3(4) in Ada.Wide_Wide_Text_IO.Text_Streams A.12.4(4/2) Strlen in Interfaces.C.Strings B.3.1(17) Sub_Second in Ada.Calendar.Formatting 9.6.1(27/2) Subtree_Node_Count in Ada.Containers.Multiway_Trees A.18.10(18/3) Supported in Ada.Execution_Time.Interrupts D.14.3(3/3) Suspend_Until_True in Ada.Synchronous_Task_Control D.10(4) Suspend_Until_True_And_Set_Deadline in Ada.Synchronous_Task_Control.EDF D.10(5.2/3) Swap in Ada.Containers.Doubly_Linked_Lists A.18.3(28/2) in Ada.Containers.Multiway_Trees A.18.10(37/3) in Ada.Containers.Vectors A.18.2(55/2), A.18.2(56/2) Swap_Links in Ada.Containers.Doubly_Linked_Lists A.18.3(29/2) Symmetric_Difference in Ada.Containers.Hashed_Sets A.18.8(35/2), A.18.8(36/2) in Ada.Containers.Ordered_Sets A.18.9(36/2), A.18.9(37/2) Tail in Ada.Strings.Bounded A.4.4(72), A.4.4(73) in Ada.Strings.Fixed A.4.3(37), A.4.3(38) in Ada.Strings.Unbounded A.4.5(67), A.4.5(68) Tan in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(4) in Ada.Numerics.Generic_Elementary_Functions A.5.1(5) Tanh in Ada.Numerics.Generic_Complex_Elementary_Functions G.1.2(6) in Ada.Numerics.Generic_Elementary_Functions A.5.1(7) Time_Of in Ada.Calendar 9.6(15) in Ada.Calendar.Formatting 9.6.1(30/2), 9.6.1(31/2) in Ada.Execution_Time D.14(9/2) in Ada.Real_Time D.8(16) Time_Of_Event in Ada.Real_Time.Timing_Events D.15(6/2) Time_Remaining in Ada.Execution_Time.Timers D.14.1(8/2) To_Ada in Interfaces.C B.3(22), B.3(26), B.3(28), B.3(32), B.3(37), B.3(39), B.3(39.10/2), B.3(39.13/2), B.3(39.17/2), B.3(39.19/2), B.3(39.4/2), B.3(39.8/2) in Interfaces.COBOL B.4(17), B.4(19) in Interfaces.Fortran B.5(13), B.5(14), B.5(16) To_Address in System.Address_To_Access_Conversions 13.7.2(3/3) in System.Storage_Elements 13.7.1(10/3) To_Basic in Ada.Characters.Handling A.3.2(6), A.3.2(7) To_Binary in Interfaces.COBOL B.4(45), B.4(48) To_Bounded_String in Ada.Strings.Bounded A.4.4(11) 859 13 December 2012 Language-Defined Subprograms Q.3 Ada Reference Manual — 2012 Edition To_C in Interfaces.C B.3(21), B.3(25), B.3(27), B.3(32), B.3(36), B.3(38), B.3(39.13/2), B.3(39.16/2), B.3(39.18/2), B.3(39.4/2), B.3(39.7/2), B.3(39.9/2) To_Character in Ada.Characters.Conversions A.3.4(5/2) To_Chars_Ptr in Interfaces.C.Strings B.3.1(8) To_COBOL in Interfaces.COBOL B.4(17), B.4(18) To_Cursor in Ada.Containers.Vectors A.18.2(25/2) To_Decimal in Interfaces.COBOL B.4(35), B.4(40), B.4(44), B.4(47) To_Display in Interfaces.COBOL B.4(36) To_Domain in Ada.Strings.Maps A.4.2(24) in Ada.Strings.Wide_Maps A.4.7(24) in Ada.Strings.Wide_Wide_Maps A.4.8(24/2) To_Duration in Ada.Real_Time D.8(13) To_Fortran in Interfaces.Fortran B.5(13), B.5(14), B.5(15) To_Holder in Ada.Containers.Indefinite_Holders A.18.18(9/3) To_Index in Ada.Containers.Vectors A.18.2(26/2) To_Integer in System.Storage_Elements 13.7.1(10/3) To_ISO_646 in Ada.Characters.Handling A.3.2(11), A.3.2(12) To_Long_Binary in Interfaces.COBOL B.4(48) To_Lower in Ada.Characters.Handling A.3.2(6), A.3.2(7) in Ada.Wide_Characters.Handling A.3.5(20/3), A.3.5(21/3) To_Mapping in Ada.Strings.Maps A.4.2(23) in Ada.Strings.Wide_Maps A.4.7(23) in Ada.Strings.Wide_Wide_Maps A.4.8(23/2) To_Packed in Interfaces.COBOL B.4(41) To_Picture in Ada.Text_IO.Editing F.3.3(6) To_Pointer in System.Address_To_Access_Conversions 13.7.2(3/3) To_Range in Ada.Strings.Maps A.4.2(24) in Ada.Strings.Wide_Maps A.4.7(25) in Ada.Strings.Wide_Wide_Maps A.4.8(25/2) To_Ranges in Ada.Strings.Maps A.4.2(10) in Ada.Strings.Wide_Maps A.4.7(10) in Ada.Strings.Wide_Wide_Maps A.4.8(10/2) To_Sequence in Ada.Strings.Maps A.4.2(19) in Ada.Strings.Wide_Maps A.4.7(19) in Ada.Strings.Wide_Wide_Maps A.4.8(19/2) To_Set in Ada.Containers.Hashed_Sets A.18.8(9/2) in Ada.Containers.Ordered_Sets A.18.9(10/2) in Ada.Strings.Maps A.4.2(8), A.4.2(9), A.4.2(17), A.4.2(18) in Ada.Strings.Wide_Maps A.4.7(8), A.4.7(9), A.4.7(17), A.4.7(18) in Ada.Strings.Wide_Wide_Maps A.4.8(8/2), A.4.8(9/2), A.4.8(17/2), A.4.8(18/2) To_String in Ada.Characters.Conversions A.3.4(5/2) in Ada.Strings.Bounded A.4.4(12) in Ada.Strings.Unbounded A.4.5(11) To_Time_Span in Ada.Real_Time D.8(13) A.4.4(56) A.4.3(21) A.4.5(51) To_Unbounded_String in Ada.Strings.Unbounded A.4.5(9), A.4.5(10) To_Upper in Ada.Characters.Handling A.3.2(6), A.3.2(7) in Ada.Wide_Characters.Handling A.3.5(20/3), A.3.5(21/3) To_Vector in Ada.Containers.Vectors A.18.2(13/2), A.18.2(14/2) To_Wide_Character in Ada.Characters.Conversions A.3.4(4/2), A.3.4(5/2) To_Wide_String in Ada.Characters.Conversions A.3.4(4/2), A.3.4(5/2) To_Wide_Wide_Character in Ada.Characters.Conversions A.3.4(4/2) To_Wide_Wide_String in Ada.Characters.Conversions A.3.4(4/2) Translate in Ada.Strings.Bounded A.4.4(53), A.4.4(54), A.4.4(55), in Ada.Strings.Fixed A.4.3(18), A.4.3(19), A.4.3(20), in Ada.Strings.Unbounded A.4.5(48), A.4.5(49), A.4.5(50), Transpose in Ada.Numerics.Generic_Complex_Arrays G.3.2(34/2) in Ada.Numerics.Generic_Real_Arrays G.3.1(17/2) Trim in Ada.Strings.Bounded A.4.4(67), A.4.4(68), A.4.4(69) in Ada.Strings.Fixed A.4.3(31), A.4.3(32), A.4.3(33), A.4.3(34) in Ada.Strings.Unbounded A.4.5(61), A.4.5(62), A.4.5(63), A.4.5(64) Unbounded_Slice in Ada.Strings.Unbounded A.4.5(22.1/2), A.4.5(22.2/2) Unchecked_Conversion child of Ada 13.9(3/3) Unchecked_Deallocation child of Ada 13.11.2(3/3) Union in Ada.Containers.Hashed_Sets A.18.8(26/2), A.18.8(27/2) in Ada.Containers.Ordered_Sets A.18.9(27/2), A.18.9(28/2) Unit_Matrix in Ada.Numerics.Generic_Complex_Arrays G.3.2(51/2) in Ada.Numerics.Generic_Real_Arrays G.3.1(29/2) Unit_Vector in Ada.Numerics.Generic_Complex_Arrays G.3.2(24/2) in Ada.Numerics.Generic_Real_Arrays G.3.1(14/2) Update in Interfaces.C.Strings B.3.1(18), B.3.1(19) Update_Element in Ada.Containers.Doubly_Linked_Lists A.18.3(17/2) in Ada.Containers.Hashed_Maps A.18.5(17/2) in Ada.Containers.Indefinite_Holders A.18.18(15/3) in Ada.Containers.Multiway_Trees A.18.10(27/3) in Ada.Containers.Ordered_Maps A.18.6(16/2) in Ada.Containers.Vectors A.18.2(33/2), A.18.2(34/2) Update_Element_Preserving_Key in Ada.Containers.Hashed_Sets A.18.8(58/2) in Ada.Containers.Ordered_Sets A.18.9(73/2) Update_Error in Interfaces.C.Strings B.3.1(20) UTC_Time_Offset in Ada.Calendar.Time_Zones 9.6.1(6/2) Q.3 Language-Defined Subprograms 13 December 2012 860 Valid in Ada.Text_IO.Editing F.3.3(5), F.3.3(12) in Interfaces.COBOL B.4(33), B.4(38), B.4(43) Value in Ada.Calendar.Formatting 9.6.1(36/2), 9.6.1(38/2) in Ada.Environment_Variables A.17(4.1/3), A.17(4/2) in Ada.Numerics.Discrete_Random A.5.2(26) in Ada.Numerics.Float_Random A.5.2(14) in Ada.Strings.Maps A.4.2(21) in Ada.Strings.Wide_Maps A.4.7(21) in Ada.Strings.Wide_Wide_Maps A.4.8(21/2) in Ada.Task_Attributes C.7.2(4) in Interfaces.C.Pointers B.3.2(6), B.3.2(7) in Interfaces.C.Strings B.3.1(13), B.3.1(14), B.3.1(15), B.3.1(16) Virtual_Length in Interfaces.C.Pointers B.3.2(13) Wait_For_Release in Ada.Synchronous_Barriers D.10.1(6/3) Wide_Equal_Case_Insensitive child of Ada.Strings.Wide_Bounded A.4.7(1/3) child of Ada.Strings.Wide_Fixed A.4.7(1/3) child of Ada.Strings.Wide_Unbounded A.4.7(1/3) Wide_Hash child of Ada.Strings.Wide_Bounded A.4.7(1/3) child of Ada.Strings.Wide_Fixed A.4.7(1/3) child of Ada.Strings.Wide_Unbounded A.4.7(1/3) Wide_Hash_Case_Insensitive child of Ada.Strings.Wide_Bounded A.4.7(1/3) child of Ada.Strings.Wide_Fixed A.4.7(1/3) child of Ada.Strings.Wide_Unbounded A.4.7(1/3) Wide_Exception_Name in Ada.Exceptions 11.4.1(2/2), 11.4.1(5/2) Ada Reference Manual — 2012 Edition Wide_Expanded_Name in Ada.Tags 3.9(7/2) Wide_Wide_Equal_Case_Insensitive child of Ada.Strings.Wide_Wide_Bounded A.4.8(1/3) child of Ada.Strings.Wide_Wide_Fixed A.4.8(1/3) child of Ada.Strings.Wide_Wide_Unbounded A.4.8(1/3) Wide_Wide_Hash child of Ada.Strings.Wide_Wide_Bounded A.4.8(1/3) child of Ada.Strings.Wide_Wide_Fixed A.4.8(1/3) child of Ada.Strings.Wide_Wide_Unbounded A.4.8(1/3) Wide_Wide_Hash_Case_Insensitive child of Ada.Strings.Wide_Wide_Bounded A.4.8(1/3) child of Ada.Strings.Wide_Wide_Fixed A.4.8(1/3) child of Ada.Strings.Wide_Wide_Unbounded A.4.8(1/3) Wide_Wide_Exception_Name in Ada.Exceptions 11.4.1(2/2), 11.4.1(5/2) Wide_Wide_Expanded_Name in Ada.Tags 3.9(7/2) Write in Ada.Direct_IO A.8.4(13) in Ada.Sequential_IO A.8.1(12) in Ada.Storage_IO A.9(7) in Ada.Streams 13.13.1(6) in Ada.Streams.Stream_IO A.12.1(18), A.12.1(19) in System.RPC E.5(8) Year in Ada.Calendar 9.6(13) in Ada.Calendar.Formatting 9.6.1(21/2) Yield in Ada.Dispatching D.2.1(1.3/3) Yield_To_Higher in Ada.Dispatching.Non_Preemptive D.2.4(2.2/3) Yield_To_Same_Or_Higher in Ada.Dispatching.Non_Preemptive D.2.4(2.2/3) Q.4 Language-Defined Exceptions This subclause lists all language-defined exceptions. 1/3 Argument_Error in Ada.Numerics A.5(3/2) Assertion_Error in Ada.Assertions 11.4.2(13/2) Capacity_Error in Ada.Containers A.18.1(5.1/3) Communication_Error in System.RPC E.5(5) Constraint_Error in Standard A.1(46) Conversion_Error in Interfaces.COBOL B.4(30) Data_Error in Ada.Direct_IO A.8.4(18) in Ada.IO_Exceptions A.13(4) in Ada.Sequential_IO A.8.1(15) in Ada.Storage_IO A.9(9) in Ada.Streams.Stream_IO A.12.1(26) in Ada.Text_IO A.10.1(85) Device_Error in Ada.Direct_IO A.8.4(18) in Ada.Directories A.16(43/2) in Ada.IO_Exceptions A.13(4) in Ada.Sequential_IO A.8.1(15) in Ada.Streams.Stream_IO A.12.1(26) in Ada.Text_IO A.10.1(85) Dispatching_Domain_Error in System.Multiprocessors.Dispatching_Domains D.16.1(4/3) Dispatching_Policy_Error in Ada.Dispatching D.2.1(1.4/3) Encoding_Error in Ada.Strings.UTF_Encoding A.4.11(8/3) End_Error in Ada.Direct_IO A.8.4(18) in Ada.IO_Exceptions A.13(4) 861 13 December 2012 Language-Defined Subprograms Q.3 Ada Reference Manual — 2012 Edition in Ada.Sequential_IO A.8.1(15) in Ada.Streams.Stream_IO A.12.1(26) in Ada.Text_IO A.10.1(85) Group_Budget_Error in Ada.Execution_Time.Group_Budgets D.14.2(11/2) Index_Error in Ada.Strings A.4.1(5) Layout_Error in Ada.IO_Exceptions A.13(4) in Ada.Text_IO A.10.1(85) Length_Error in Ada.Strings A.4.1(5) Mode_Error in Ada.Direct_IO A.8.4(18) in Ada.IO_Exceptions A.13(4) in Ada.Sequential_IO A.8.1(15) in Ada.Streams.Stream_IO A.12.1(26) in Ada.Text_IO A.10.1(85) Name_Error in Ada.Direct_IO A.8.4(18) in Ada.Directories A.16(43/2) in Ada.IO_Exceptions A.13(4) in Ada.Sequential_IO A.8.1(15) in Ada.Streams.Stream_IO A.12.1(26) in Ada.Text_IO A.10.1(85) Pattern_Error in Ada.Strings A.4.1(5) Picture_Error in Ada.Text_IO.Editing F.3.3(9) Pointer_Error in Interfaces.C.Pointers B.3.2(8) Program_Error in Standard A.1(46) Status_Error in Ada.Direct_IO A.8.4(18) in Ada.Directories A.16(43/2) in Ada.IO_Exceptions A.13(4) in Ada.Sequential_IO A.8.1(15) in Ada.Streams.Stream_IO A.12.1(26) in Ada.Text_IO A.10.1(85) Storage_Error in Standard A.1(46) Tag_Error in Ada.Tags 3.9(8) Tasking_Error in Standard A.1(46) Terminator_Error in Interfaces.C B.3(40) Time_Error in Ada.Calendar 9.6(18) Timer_Resource_Error in Ada.Execution_Time.Timers D.14.1(9/2) Translation_Error in Ada.Strings A.4.1(5) Unknown_Zone_Error in Ada.Calendar.Time_Zones 9.6.1(5/2) Use_Error in Ada.Direct_IO A.8.4(18) in Ada.Directories A.16(43/2) in Ada.IO_Exceptions A.13(4) in Ada.Sequential_IO A.8.1(15) in Ada.Streams.Stream_IO A.12.1(26) in Ada.Text_IO A.10.1(85) Q.5 Language-Defined Objects 1/3 This subclause lists all language-defined constants, variables, named numbers, and enumeration literals. ACK in Ada.Characters.Latin_1 A.3.3(5) Acute in Ada.Characters.Latin_1 A.3.3(22) Ada_To_COBOL in Interfaces.COBOL B.4(14) Alphanumeric_Set in Ada.Strings.Maps.Constants A.4.6(4) Ampersand in Ada.Characters.Latin_1 A.3.3(8) APC in Ada.Characters.Latin_1 A.3.3(19) Apostrophe in Ada.Characters.Latin_1 A.3.3(8) Asterisk in Ada.Characters.Latin_1 A.3.3(8) Basic_Map in Ada.Strings.Maps.Constants A.4.6(5) Basic_Set in Ada.Strings.Maps.Constants A.4.6(4) BEL in Ada.Characters.Latin_1 A.3.3(5) BOM_16 in Ada.Strings.UTF_Encoding A.4.11(12/3) BOM_16BE in Ada.Strings.UTF_Encoding A.4.11(10/3) BOM_16LE in Ada.Strings.UTF_Encoding A.4.11(11/3) BOM_8 in Ada.Strings.UTF_Encoding A.4.11(9/3) BPH in Ada.Characters.Latin_1 A.3.3(17) Broken_Bar in Ada.Characters.Latin_1 A.3.3(21/3) BS in Ada.Characters.Latin_1 A.3.3(5) Buffer_Size in Ada.Storage_IO A.9(4) CAN in Ada.Characters.Latin_1 A.3.3(6) CCH in Ada.Characters.Latin_1 A.3.3(18) Cedilla in Ada.Characters.Latin_1 A.3.3(22) Cent_Sign in Ada.Characters.Latin_1 A.3.3(21/3) char16_nul in Interfaces.C B.3(39.3/2) char32_nul in Interfaces.C B.3(39.12/2) CHAR_BIT in Interfaces.C B.3(6) Character_Set in Ada.Strings.Wide_Maps A.4.7(46/2) in Ada.Strings.Wide_Maps.Wide_Constants A.4.8(48/2) Circumflex in Ada.Characters.Latin_1 A.3.3(12) COBOL_To_Ada in Interfaces.COBOL B.4(15) Colon in Ada.Characters.Latin_1 A.3.3(10) Comma in Ada.Characters.Latin_1 A.3.3(8) Commercial_At in Ada.Characters.Latin_1 A.3.3(10) Q.4 Language-Defined Exceptions 13 December 2012 862 Ada Reference Manual — 2012 Edition Control_Set in Ada.Strings.Maps.Constants A.4.6(4) Copyright_Sign in Ada.Characters.Latin_1 A.3.3(21/3) Country_Unknown in Ada.Locales A.19(5/3) CPU_Tick in Ada.Execution_Time D.14(4/2) CPU_Time_First in Ada.Execution_Time D.14(4/2) CPU_Time_Last in Ada.Execution_Time D.14(4/2) CPU_Time_Unit in Ada.Execution_Time D.14(4/2) CR in Ada.Characters.Latin_1 A.3.3(5) CSI in Ada.Characters.Latin_1 A.3.3(19) Currency_Sign in Ada.Characters.Latin_1 A.3.3(21/3) DC1 in Ada.Characters.Latin_1 A.3.3(6) DC2 in Ada.Characters.Latin_1 A.3.3(6) DC3 in Ada.Characters.Latin_1 A.3.3(6) DC4 in Ada.Characters.Latin_1 A.3.3(6) DCS in Ada.Characters.Latin_1 A.3.3(18) Decimal_Digit_Set in Ada.Strings.Maps.Constants A.4.6(4) Default_Aft in Ada.Text_IO A.10.1(64), A.10.1(69), A.10.1(74) in Ada.Text_IO.Complex_IO G.1.3(5) Default_Base in Ada.Text_IO A.10.1(53), A.10.1(58) Default_Bit_Order in System 13.7(15/2) Default_Currency in Ada.Text_IO.Editing F.3.3(10) Default_Deadline in Ada.Dispatching.EDF D.2.6(9/2) Default_Exp in Ada.Text_IO A.10.1(64), A.10.1(69), A.10.1(74) in Ada.Text_IO.Complex_IO G.1.3(5) Default_Fill in Ada.Text_IO.Editing F.3.3(10) Default_Fore in Ada.Text_IO A.10.1(64), A.10.1(69), A.10.1(74) in Ada.Text_IO.Complex_IO G.1.3(5) Default_Priority in System 13.7(17) Default_Quantum in Ada.Dispatching.Round_Robin D.2.5(4/2) Default_Radix_Mark in Ada.Text_IO.Editing F.3.3(10) Default_Separator in Ada.Text_IO.Editing F.3.3(10) Default_Setting in Ada.Text_IO A.10.1(80) Default_Width in Ada.Text_IO A.10.1(53), A.10.1(58), A.10.1(80) Degree_Sign in Ada.Characters.Latin_1 A.3.3(22) DEL in Ada.Characters.Latin_1 A.3.3(14) Diaeresis in Ada.Characters.Latin_1 A.3.3(21/3) Division_Sign in Ada.Characters.Latin_1 A.3.3(26) DLE in Ada.Characters.Latin_1 A.3.3(6) Dollar_Sign in Ada.Characters.Latin_1 A.3.3(8) e in Ada.Numerics A.5(3/2) EM in Ada.Characters.Latin_1 A.3.3(6) Empty_Holder in Ada.Containers.Indefinite_Holders A.18.18(7/3) Empty_List in Ada.Containers.Doubly_Linked_Lists A.18.3(8/2) Empty_Map in Ada.Containers.Hashed_Maps A.18.5(5/2) in Ada.Containers.Ordered_Maps A.18.6(6/2) Empty_Set in Ada.Containers.Hashed_Sets A.18.8(5/2) in Ada.Containers.Ordered_Sets A.18.9(6/2) Empty_Tree in Ada.Containers.Multiway_Trees A.18.10(10/3) Empty_Vector in Ada.Containers.Vectors A.18.2(10/2) ENQ in Ada.Characters.Latin_1 A.3.3(5) EOT in Ada.Characters.Latin_1 A.3.3(5) EPA in Ada.Characters.Latin_1 A.3.3(18) Equals_Sign in Ada.Characters.Latin_1 A.3.3(10) ESA in Ada.Characters.Latin_1 A.3.3(17) ESC in Ada.Characters.Latin_1 A.3.3(6) ETB in Ada.Characters.Latin_1 A.3.3(6) ETX in Ada.Characters.Latin_1 A.3.3(5) Exclamation in Ada.Characters.Latin_1 A.3.3(8) Failure in Ada.Command_Line A.15(8) Feminine_Ordinal_Indicator in Ada.Characters.Latin_1 A.3.3(21/3) FF in Ada.Characters.Latin_1 A.3.3(5) Fine_Delta in System 13.7(9) Fraction_One_Half in Ada.Characters.Latin_1 A.3.3(22) Fraction_One_Quarter in Ada.Characters.Latin_1 A.3.3(22) Fraction_Three_Quarters in Ada.Characters.Latin_1 A.3.3(22) Friday in Ada.Calendar.Formatting 9.6.1(17/2) FS in Ada.Characters.Latin_1 A.3.3(6) Full_Stop in Ada.Characters.Latin_1 A.3.3(8) Graphic_Set in Ada.Strings.Maps.Constants A.4.6(4) Grave in Ada.Characters.Latin_1 A.3.3(13) Greater_Than_Sign in Ada.Characters.Latin_1 A.3.3(10) GS in Ada.Characters.Latin_1 A.3.3(6) Hexadecimal_Digit_Set in Ada.Strings.Maps.Constants A.4.6(4) High_Order_First in Interfaces.COBOL B.4(25) in System 13.7(15/2) HT in Ada.Characters.Latin_1 A.3.3(5) HTJ in Ada.Characters.Latin_1 A.3.3(17) HTS in Ada.Characters.Latin_1 A.3.3(17) Hyphen in Ada.Characters.Latin_1 A.3.3(8) i in Ada.Numerics.Generic_Complex_Types G.1.1(5) in Interfaces.Fortran B.5(10) Identity in Ada.Strings.Maps A.4.2(22) in Ada.Strings.Wide_Maps A.4.7(22) in Ada.Strings.Wide_Wide_Maps A.4.8(22/2) Interrupt_Clocks_Supported in Ada.Execution_Time D.14(9.1/3) Inverted_Exclamation in Ada.Characters.Latin_1 A.3.3(21/3) 863 13 December 2012 Language-Defined Objects Q.5 Ada Reference Manual — 2012 Edition Inverted_Question in Ada.Characters.Latin_1 A.3.3(22) IS1 in Ada.Characters.Latin_1 A.3.3(16) IS2 in Ada.Characters.Latin_1 A.3.3(16) IS3 in Ada.Characters.Latin_1 A.3.3(16) IS4 in Ada.Characters.Latin_1 A.3.3(16) ISO_646_Set in Ada.Strings.Maps.Constants A.4.6(4) j in Ada.Numerics.Generic_Complex_Types G.1.1(5) in Interfaces.Fortran B.5(10) Language_Unknown in Ada.Locales A.19(5/3) LC_A in Ada.Characters.Latin_1 A.3.3(13) LC_A_Acute in Ada.Characters.Latin_1 A.3.3(25) LC_A_Circumflex in Ada.Characters.Latin_1 A.3.3(25) LC_A_Diaeresis in Ada.Characters.Latin_1 A.3.3(25) LC_A_Grave in Ada.Characters.Latin_1 A.3.3(25) LC_A_Ring in Ada.Characters.Latin_1 A.3.3(25) LC_A_Tilde in Ada.Characters.Latin_1 A.3.3(25) LC_AE_Diphthong in Ada.Characters.Latin_1 A.3.3(25) LC_B in Ada.Characters.Latin_1 A.3.3(13) LC_C in Ada.Characters.Latin_1 A.3.3(13) LC_C_Cedilla in Ada.Characters.Latin_1 A.3.3(25) LC_D in Ada.Characters.Latin_1 A.3.3(13) LC_E in Ada.Characters.Latin_1 A.3.3(13) LC_E_Acute in Ada.Characters.Latin_1 A.3.3(25) LC_E_Circumflex in Ada.Characters.Latin_1 A.3.3(25) LC_E_Diaeresis in Ada.Characters.Latin_1 A.3.3(25) LC_E_Grave in Ada.Characters.Latin_1 A.3.3(25) LC_F in Ada.Characters.Latin_1 A.3.3(13) LC_G in Ada.Characters.Latin_1 A.3.3(13) LC_German_Sharp_S in Ada.Characters.Latin_1 A.3.3(24) LC_H in Ada.Characters.Latin_1 A.3.3(13) LC_I in Ada.Characters.Latin_1 A.3.3(13) LC_I_Acute in Ada.Characters.Latin_1 A.3.3(25) LC_I_Circumflex in Ada.Characters.Latin_1 A.3.3(25) LC_I_Diaeresis in Ada.Characters.Latin_1 A.3.3(25) LC_I_Grave in Ada.Characters.Latin_1 A.3.3(25) LC_Icelandic_Eth in Ada.Characters.Latin_1 A.3.3(26) LC_Icelandic_Thorn in Ada.Characters.Latin_1 A.3.3(26) LC_J in Ada.Characters.Latin_1 A.3.3(13) LC_K in Ada.Characters.Latin_1 A.3.3(13) LC_L in Ada.Characters.Latin_1 A.3.3(13) LC_M in Ada.Characters.Latin_1 A.3.3(13) LC_N in Ada.Characters.Latin_1 A.3.3(13) LC_N_Tilde in Ada.Characters.Latin_1 A.3.3(26) LC_O in Ada.Characters.Latin_1 A.3.3(13) LC_O_Acute in Ada.Characters.Latin_1 A.3.3(26) LC_O_Circumflex in Ada.Characters.Latin_1 A.3.3(26) LC_O_Diaeresis in Ada.Characters.Latin_1 A.3.3(26) LC_O_Grave in Ada.Characters.Latin_1 A.3.3(26) LC_O_Oblique_Stroke in Ada.Characters.Latin_1 A.3.3(26) LC_O_Tilde in Ada.Characters.Latin_1 A.3.3(26) LC_P in Ada.Characters.Latin_1 A.3.3(14) LC_Q in Ada.Characters.Latin_1 A.3.3(14) LC_R in Ada.Characters.Latin_1 A.3.3(14) LC_S in Ada.Characters.Latin_1 A.3.3(14) LC_T in Ada.Characters.Latin_1 A.3.3(14) LC_U in Ada.Characters.Latin_1 A.3.3(14) LC_U_Acute in Ada.Characters.Latin_1 A.3.3(26) LC_U_Circumflex in Ada.Characters.Latin_1 A.3.3(26) LC_U_Diaeresis in Ada.Characters.Latin_1 A.3.3(26) LC_U_Grave in Ada.Characters.Latin_1 A.3.3(26) LC_V in Ada.Characters.Latin_1 A.3.3(14) LC_W in Ada.Characters.Latin_1 A.3.3(14) LC_X in Ada.Characters.Latin_1 A.3.3(14) LC_Y in Ada.Characters.Latin_1 A.3.3(14) LC_Y_Acute in Ada.Characters.Latin_1 A.3.3(26) LC_Y_Diaeresis in Ada.Characters.Latin_1 A.3.3(26) LC_Z in Ada.Characters.Latin_1 A.3.3(14) Leading_Nonseparate in Interfaces.COBOL B.4(23) Leading_Separate in Interfaces.COBOL B.4(23) Left_Angle_Quotation in Ada.Characters.Latin_1 A.3.3(21/3) Left_Curly_Bracket in Ada.Characters.Latin_1 A.3.3(14) Left_Parenthesis in Ada.Characters.Latin_1 A.3.3(8) Left_Square_Bracket in Ada.Characters.Latin_1 A.3.3(12) Less_Than_Sign in Ada.Characters.Latin_1 A.3.3(10) Letter_Set in Ada.Strings.Maps.Constants A.4.6(4) LF in Ada.Characters.Latin_1 A.3.3(5) Low_Line in Ada.Characters.Latin_1 A.3.3(12) Low_Order_First in Interfaces.COBOL B.4(25) in System 13.7(15/2) Lower_Case_Map in Ada.Strings.Maps.Constants A.4.6(5) Lower_Set in Ada.Strings.Maps.Constants A.4.6(4) Macron in Ada.Characters.Latin_1 A.3.3(21/3) Masculine_Ordinal_Indicator in Ada.Characters.Latin_1 A.3.3(22) Max_Base_Digits in System 13.7(8) Max_Binary_Modulus in System 13.7(7) Max_Decimal_Digits in Ada.Decimal F.2(5) Max_Delta in Ada.Decimal F.2(4) Max_Digits in System 13.7(8) Q.5 Language-Defined Objects 13 December 2012 864 Ada Reference Manual — 2012 Edition Max_Digits_Binary in Interfaces.COBOL B.4(11) Max_Digits_Long_Binary in Interfaces.COBOL B.4(11) Max_Image_Width in Ada.Numerics.Discrete_Random A.5.2(25) in Ada.Numerics.Float_Random A.5.2(13) Max_Int in System 13.7(6) Max_Length in Ada.Strings.Bounded A.4.4(5) Max_Mantissa in System 13.7(9) Max_Nonbinary_Modulus in System 13.7(7) Max_Picture_Length in Ada.Text_IO.Editing F.3.3(8) Max_Scale in Ada.Decimal F.2(3) Memory_Size in System 13.7(13) Micro_Sign in Ada.Characters.Latin_1 A.3.3(22) Middle_Dot in Ada.Characters.Latin_1 A.3.3(22) Min_Delta in Ada.Decimal F.2(4) Min_Handler_Ceiling in Ada.Execution_Time.Group_Budgets D.14.2(7/2) in Ada.Execution_Time.Timers D.14.1(6/2) Min_Int in System 13.7(6) Min_Scale in Ada.Decimal F.2(3) Minus_Sign in Ada.Characters.Latin_1 A.3.3(8) Monday in Ada.Calendar.Formatting 9.6.1(17/2) Multiplication_Sign in Ada.Characters.Latin_1 A.3.3(24) MW in Ada.Characters.Latin_1 A.3.3(18) NAK in Ada.Characters.Latin_1 A.3.3(6) Native_Binary in Interfaces.COBOL B.4(25) NBH in Ada.Characters.Latin_1 A.3.3(17) NBSP in Ada.Characters.Latin_1 A.3.3(21/3) NEL in Ada.Characters.Latin_1 A.3.3(17) No_Break_Space in Ada.Characters.Latin_1 A.3.3(21/3) No_Element in Ada.Containers.Doubly_Linked_Lists A.18.3(9/2) in Ada.Containers.Hashed_Maps A.18.5(6/2) in Ada.Containers.Hashed_Sets A.18.8(6/2) in Ada.Containers.Multiway_Trees A.18.10(11/3) in Ada.Containers.Ordered_Maps A.18.6(7/2) in Ada.Containers.Ordered_Sets A.18.9(7/2) in Ada.Containers.Vectors A.18.2(11/2) No_Index in Ada.Containers.Vectors A.18.2(7/2) No_Tag in Ada.Tags 3.9(6.1/2) Not_A_Specific_CPU in System.Multiprocessors D.16(4/3) Not_Sign in Ada.Characters.Latin_1 A.3.3(21/3) NUL in Ada.Characters.Latin_1 A.3.3(5) in Interfaces.C B.3(20/1) Null_Address in System 13.7(12) Null_Bounded_String in Ada.Strings.Bounded A.4.4(7) Null_Id in Ada.Exceptions 11.4.1(2/2) Null_Occurrence in Ada.Exceptions 11.4.1(3/2) Null_Ptr in Interfaces.C.Strings B.3.1(7) Null_Set in Ada.Strings.Maps A.4.2(5) in Ada.Strings.Wide_Maps A.4.7(5) in Ada.Strings.Wide_Wide_Maps A.4.8(5/2) Null_Unbounded_String in Ada.Strings.Unbounded A.4.5(5) Number_Sign in Ada.Characters.Latin_1 A.3.3(8) OSC in Ada.Characters.Latin_1 A.3.3(19) Packed_Signed in Interfaces.COBOL B.4(27) Packed_Unsigned in Interfaces.COBOL B.4(27) Paragraph_Sign in Ada.Characters.Latin_1 A.3.3(22) Percent_Sign in Ada.Characters.Latin_1 A.3.3(8) Pi in Ada.Numerics A.5(3/2) Pilcrow_Sign in Ada.Characters.Latin_1 A.3.3(22) PLD in Ada.Characters.Latin_1 A.3.3(17) PLU in Ada.Characters.Latin_1 A.3.3(17) Plus_Minus_Sign in Ada.Characters.Latin_1 A.3.3(22) Plus_Sign in Ada.Characters.Latin_1 A.3.3(8) PM in Ada.Characters.Latin_1 A.3.3(19) Pound_Sign in Ada.Characters.Latin_1 A.3.3(21/3) PU1 in Ada.Characters.Latin_1 A.3.3(18) PU2 in Ada.Characters.Latin_1 A.3.3(18) Question in Ada.Characters.Latin_1 A.3.3(10) Quotation in Ada.Characters.Latin_1 A.3.3(8) Registered_Trade_Mark_Sign in Ada.Characters.Latin_1 A.3.3(21/3) Reserved_128 in Ada.Characters.Latin_1 A.3.3(17) Reserved_129 in Ada.Characters.Latin_1 A.3.3(17) Reserved_132 in Ada.Characters.Latin_1 A.3.3(17) Reserved_153 in Ada.Characters.Latin_1 A.3.3(19) Reverse_Solidus in Ada.Characters.Latin_1 A.3.3(12) RI in Ada.Characters.Latin_1 A.3.3(17) Right_Angle_Quotation in Ada.Characters.Latin_1 A.3.3(22) Right_Curly_Bracket in Ada.Characters.Latin_1 A.3.3(14) Right_Parenthesis in Ada.Characters.Latin_1 A.3.3(8) Right_Square_Bracket in Ada.Characters.Latin_1 A.3.3(12) Ring_Above in Ada.Characters.Latin_1 A.3.3(22) RS in Ada.Characters.Latin_1 A.3.3(6) Saturday in Ada.Calendar.Formatting 9.6.1(17/2) SCHAR_MAX in Interfaces.C B.3(6) SCHAR_MIN in Interfaces.C B.3(6) SCI in Ada.Characters.Latin_1 A.3.3(19) Section_Sign in Ada.Characters.Latin_1 A.3.3(21/3) Semicolon in Ada.Characters.Latin_1 A.3.3(10) Separate_Interrupt_Clocks_Supported in Ada.Execution_Time D.14(9.2/3) SI in Ada.Characters.Latin_1 A.3.3(5) SO in Ada.Characters.Latin_1 A.3.3(5) Soft_Hyphen in Ada.Characters.Latin_1 A.3.3(21/3) SOH in Ada.Characters.Latin_1 A.3.3(5) 865 13 December 2012 Language-Defined Objects Q.5 Ada Reference Manual — 2012 Edition Solidus in Ada.Characters.Latin_1 A.3.3(8) SOS in Ada.Characters.Latin_1 A.3.3(19) SPA in Ada.Characters.Latin_1 A.3.3(18) Space in Ada.Characters.Latin_1 A.3.3(8) in Ada.Strings A.4.1(4/2) Special_Set in Ada.Strings.Maps.Constants A.4.6(4) SS2 in Ada.Characters.Latin_1 A.3.3(17) SS3 in Ada.Characters.Latin_1 A.3.3(17) SSA in Ada.Characters.Latin_1 A.3.3(17) ST in Ada.Characters.Latin_1 A.3.3(19) Storage_Unit in System 13.7(13) STS in Ada.Characters.Latin_1 A.3.3(18) STX in Ada.Characters.Latin_1 A.3.3(5) SUB in Ada.Characters.Latin_1 A.3.3(6) Success in Ada.Command_Line A.15(8) Sunday in Ada.Calendar.Formatting 9.6.1(17/2) Superscript_One in Ada.Characters.Latin_1 A.3.3(22) Superscript_Three in Ada.Characters.Latin_1 A.3.3(22) Superscript_Two in Ada.Characters.Latin_1 A.3.3(22) SYN in Ada.Characters.Latin_1 A.3.3(6) System_Dispatching_Domain in System.Multiprocessors.Dispatching_Domains D.16.1(6/3) System_Name in System 13.7(4) Thursday in Ada.Calendar.Formatting 9.6.1(17/2) Tick in Ada.Real_Time D.8(6) in System 13.7(10) Tilde in Ada.Characters.Latin_1 A.3.3(14) Time_First in Ada.Real_Time D.8(4) Time_Last in Ada.Real_Time D.8(4) Time_Span_First in Ada.Real_Time D.8(5) Time_Span_Last in Ada.Real_Time D.8(5) Time_Span_Unit in Ada.Real_Time D.8(5) Time_Span_Zero in Ada.Real_Time D.8(5) Time_Unit in Ada.Real_Time D.8(4) Trailing_Nonseparate in Interfaces.COBOL B.4(23) Trailing_Separate in Interfaces.COBOL B.4(23) Tuesday in Ada.Calendar.Formatting 9.6.1(17/2) UC_A_Acute in Ada.Characters.Latin_1 A.3.3(23) UC_A_Circumflex in Ada.Characters.Latin_1 A.3.3(23) UC_A_Diaeresis in Ada.Characters.Latin_1 A.3.3(23) UC_A_Grave in Ada.Characters.Latin_1 A.3.3(23) UC_A_Ring in Ada.Characters.Latin_1 A.3.3(23) UC_A_Tilde in Ada.Characters.Latin_1 A.3.3(23) UC_AE_Diphthong in Ada.Characters.Latin_1 A.3.3(23) UC_C_Cedilla in Ada.Characters.Latin_1 A.3.3(23) UC_E_Acute in Ada.Characters.Latin_1 A.3.3(23) UC_E_Circumflex in Ada.Characters.Latin_1 A.3.3(23) UC_E_Diaeresis in Ada.Characters.Latin_1 A.3.3(23) UC_E_Grave in Ada.Characters.Latin_1 A.3.3(23) UC_I_Acute in Ada.Characters.Latin_1 A.3.3(23) UC_I_Circumflex in Ada.Characters.Latin_1 A.3.3(23) UC_I_Diaeresis in Ada.Characters.Latin_1 A.3.3(23) UC_I_Grave in Ada.Characters.Latin_1 A.3.3(23) UC_Icelandic_Eth in Ada.Characters.Latin_1 A.3.3(24) UC_Icelandic_Thorn in Ada.Characters.Latin_1 A.3.3(24) UC_N_Tilde in Ada.Characters.Latin_1 A.3.3(24) UC_O_Acute in Ada.Characters.Latin_1 A.3.3(24) UC_O_Circumflex in Ada.Characters.Latin_1 A.3.3(24) UC_O_Diaeresis in Ada.Characters.Latin_1 A.3.3(24) UC_O_Grave in Ada.Characters.Latin_1 A.3.3(24) UC_O_Oblique_Stroke in Ada.Characters.Latin_1 A.3.3(24) UC_O_Tilde in Ada.Characters.Latin_1 A.3.3(24) UC_U_Acute in Ada.Characters.Latin_1 A.3.3(24) UC_U_Circumflex in Ada.Characters.Latin_1 A.3.3(24) UC_U_Diaeresis in Ada.Characters.Latin_1 A.3.3(24) UC_U_Grave in Ada.Characters.Latin_1 A.3.3(24) UC_Y_Acute in Ada.Characters.Latin_1 A.3.3(24) UCHAR_MAX in Interfaces.C B.3(6) Unbounded in Ada.Text_IO A.10.1(5) Unsigned in Interfaces.COBOL B.4(23) Upper_Case_Map in Ada.Strings.Maps.Constants A.4.6(5) Upper_Set in Ada.Strings.Maps.Constants A.4.6(4) US in Ada.Characters.Latin_1 A.3.3(6) Vertical_Line in Ada.Characters.Latin_1 A.3.3(14) VT in Ada.Characters.Latin_1 A.3.3(5) VTS in Ada.Characters.Latin_1 A.3.3(17) Wednesday in Ada.Calendar.Formatting 9.6.1(17/2) Wide_Character_Set in Ada.Strings.Wide_Maps.Wide_Constants A.4.8(48/2) wide_nul in Interfaces.C B.3(31/1) Wide_Space in Ada.Strings A.4.1(4/2) Wide_Wide_Space in Ada.Strings A.4.1(4/2) Word_Size in System 13.7(13) Yen_Sign in Ada.Characters.Latin_1 A.3.3(21/3) Q.5 Language-Defined Objects 13 December 2012 866 Ada Reference Manual — 2012 Edition Index entries are given by paragraph number. Index & operator 4.4(1/3), 4.5.3(3) * operator 4.4(1/3), 4.5.5(1) ** operator 4.4(1/3), 4.5.6(7) + operator 4.4(1/3), 4.5.3(1), 4.5.4(1) - operator 4.4(1/3), 4.5.3(1), 4.5.4(1) / operator 4.4(1/3), 4.5.5(1) /= operator 4.4(1/3), 4.5.2(1), 6.6(6/3) 10646:2011, ISO/IEC standard 1.2(8/3) 14882:2011, ISO/IEC standard 1.2(9/3) 1539-1:2004, ISO/IEC standard 1.2(3/2) 19769:2004, ISO/IEC technical report 1.2(10/2) 1989:2002, ISO standard 1.2(4/2) 3166-1:2006, ISO/IEC standard 1.2(4.1/3) 639-3:2007, ISO standard 1.2(1.1/3) 6429:1992, ISO/IEC standard 1.2(5) 646:1991, ISO/IEC standard 1.2(2) used 5.1(4/2), P Abort_Task in Ada.Task_Identification C.7.1(3/3) abortable_part 9.7.4(5) used 9.7.4(2), P abs operator 4.4(1/3), 4.5.6(1) absolute value 4.4(1/3), 4.5.6(1) abstract data type (ADT) See private types and private access_to_subprogram_definition 3.10(5) used 3.10(2/2), P access_type_definition 3.10(2/2) used 3.2.1(4/2), 12.5.4(2), P accessibility distributed 3.10.2(32.1/3) from shared passive library units E.2.1(8) extensions 7.3(1) See also abstract type 3.9.3(1/2) abstract subprogram 3.9.3(1/2), accessibility level 3.10.2(3/2) accessibility rule Access attribute 3.10.2(28/3), 3.9.3(3/2) abstract type 3.9.3(1.2/2), 3.9.3(1/2), N(1.1/2) 3.10.2(32/3) requeue statement 9.5.4(6/3) type conversion 4.6(24.17/3), abstract_subprogram_declaration 4.6(24.21/2) 3.9.3(1.1/3) used 3.1(3/3), P accept_alternative 9.7.1(5) used 9.7.1(4), P accept_statement 9.5.2(3) used 5.1(5/2), 9.7.1(5), P acceptable interpretation 8.6(14) Access attribute 3.10.2(24/1), 3.10.2(32/3) See also Unchecked_Access attribute type conversion, array components 4.6(24.6/2) Accessibility_Check 11.5(19.1/2) [partial] 3.10.2(29), 4.6(39.1/2), 4.6(48/3), 4.8(10.1/3), 6.5(8/3), 6.5(21/3), 13.11.4(25/3), 13.11.4(26/3), E.4(18/1) accessible partition E.1(7) accuracy 4.6(32), G.2(1) ACK in Ada.Characters.Latin_1 A.3.3(5) acquire execution resource associated with protected object 9.5.1(5) activation of a task 9.2(1) activation failure 9.2(1) Activation_Is_Complete in Ada.Task_Identification C.7.1(4/3) activator of a task 9.2(5) active locale A.19(8/3) active partition 10.2(28/3), E.1(2) active priority D.1(15) actual 12.3(7/3) actual duration D.9(12) actual parameter for a formal parameter 6.4.1(3) actual subtype 3.3(23/3), 12.5(4) of an object 3.3.1(9/2) actual type 12.5(4) actual_parameter_part 6.4(4) used 4.1.6(10/3), 6.4(2), 6.4(3), 9.5.3(2), P 8859-1:1998, ISO/IEC standard 1.2(6/3) 13.10(3) 9899:2011, ISO/IEC standard 1.2(7/3) < operator 4.4(1/3), 4.5.2(1) <= operator 4.4(1/3), 4.5.2(1) = operator 4.4(1/3), 4.5.2(1) > operator 4.4(1/3), 4.5.2(1) >= operator 4.4(1/3), 4.5.2(1) A AARM 0.2(5/3) abnormal completion 7.6.1(2/2) abnormal state of an object 13.9.1(4) [partial] 9.8(21), 11.6(6/3), A.13(17) abnormal task 9.8(4) abort of a partition E.1(7) of a task 9.8(4) of the execution of a construct 9.8(5) abort completion point 9.8(15) abort-deferred operation 9.8(5) abort_statement 9.8(2) access discriminant 3.7(9/2) access parameter 6.1(24/2) access paths distinct 6.2(12/3) access result type 6.1(24/2) access type 3.10(1), N(2) subpool 13.11.4(22/3) access types input-output unspecified A.7(6) access value 3.10(1) access-to-constant type 3.10(10) access-to-object type 3.10(7/1) access-to-subprogram type 3.10(7/1), 3.10(11) access-to-variable type 3.10(10) Access_Check 11.5(11/2) [partial] 4.1(13), 4.1.5(8/3), 4.6(51/3), 4.8(10.4/3) access_definition 3.10(6/2) used 3.3.1(2/3), 3.6(7/2), 3.7(5/2), 6.1(13/2), 6.1(15/3), 6.5(2.3/2), 8.5.1(2/3), 12.4(2/3), P access_to_object_definition 3.10(3) used 3.10(2/2), P 867 13 December 2012 Index Ada Reference Manual — 2012 Edition Actual_Quantum in Ada.Dispatching.Round_Robin Ada.Containers.Synchronized_Queue_Inte Ada.Numerics.Generic_Elementary_- rfaces A.18.27(3/3) Functions A.5.1(3) D.2.5(4/2) Ada.Containers.Unbounded_Priority_Que Ada.Numerics.Generic_Real_Arrays ues A.18.30(2/3) G.3.1(2/2) Acute in Ada.Characters.Latin_1 A.3.3(22) Ada A.2(2) Ada calling convention 6.3.1(3/3) Ada.Ada.Unchecked_Deallocate_Subpool 13.11.5(3/3) Ada.Assertions 11.4.2(12/2) Ada.Asynchronous_Task_Control Ada.Containers.Unbounded_Synchronize d_Queues A.18.28(2/3) Ada.Containers.Vectors A.18.2(6/3) Ada.Decimal F.2(2) Ada.Direct_IO A.8.4(2) Ada.Directories A.16(3/2) Ada.Directories.Hierarchical_File_Names D.11(3/2) A.16.1(3/3) Ada.Numerics.Real_Arrays G.3.1(31/2) Ada.Real_Time D.8(3) Ada.Real_Time.Timing_Events D.15(3/2) Ada.Sequential_IO A.8.1(2) Ada.Storage_IO A.9(3) Ada.Streams 13.13.1(2) Ada.Streams.Stream_IO A.12.1(3/3) Ada.Strings A.4.1(3) Ada.Strings.Bounded A.4.4(3) Ada.Strings.Bounded.Equal_Case_Insensi tive A.4.10(7/3) Ada.Calendar 9.6(10) Ada.Calendar.Arithmetic 9.6.1(8/2) Ada.Calendar.Formatting 9.6.1(15/2) Ada.Calendar.Time_Zones 9.6.1(2/2) Ada.Characters A.3.1(2) Ada.Characters.Conversions A.3.4(2/2) Ada.Characters.Handling A.3.2(2/2) Ada.Characters.Latin_1 A.3.3(3) Ada.Command_Line A.15(3) Ada.Complex_Text_IO G.1.3(9.1/2) Ada.Containers A.18.1(3/2) Ada.Containers.Bounded_Priority_Queue Ada.Directories.Information A.16(124/2) Ada.Dispatching D.2.1(1.2/3) Ada.Dispatching.EDF D.2.6(9/2) Ada.Dispatching.Non_Preemptive D.2.4(2.2/3) Ada.Dispatching.Round_Robin Ada.Strings.Bounded.Hash A.4.9(7/3) Ada.Strings.Bounded.Hash_Case_Insensit D.2.5(4/2) ive A.4.9(11.7/3) Ada.Dynamic_Priorities D.5.1(3/2) Ada.Environment_Variables A.17(3/2) Ada.Exceptions 11.4.1(2/2) Ada.Execution_Time D.14(3/2) Ada.Execution_Time.Group_Budgets Ada.Strings.Bounded.Less_Case_Insensiti ve A.4.10(18/3) Ada.Strings.Equal_Case_Insensitive A.4.10(2/3) Ada.Strings.Fixed A.4.3(5) Ada.Strings.Fixed.Equal_Case_Insensitive s A.18.31(2/3) D.14.2(3/3) Ada.Containers.Bounded_Synchronized_ Ada.Execution_Time.Interrupts A.4.10(5/3) Queues A.18.29(2/3) D.14.3(3/3) Ada.Strings.Fixed.Hash_Case_Insensitive Ada.Containers.Doubly_Linked_Lists A.18.3(5/3) Ada.Containers.Generic_Array_Sort A.18.26(3/2) Ada.Containers.Generic_Constrained_Arr Ada.Execution_Time.Timers D.14.1(3/2) Ada.Finalization 7.6(4/3) Ada.Float_Text_IO A.10.9(33) Ada.Float_Wide_Text_IO A.11(2/2) Ada.Float_Wide_Wide_Text_IO ay_Sort A.18.26(7/2) Ada.Containers.Generic_Sort A.18.26(9.2/3) Ada.Containers.Hashed_Maps A.18.5(2/3) A.11(3/2) Ada.Integer_Text_IO A.10.8(21) Ada.Integer_Wide_Text_IO A.11(2/2) Ada.Integer_Wide_Wide_Text_IO A.11(3/2) Ada.Containers.Hashed_Sets A.18.8(2/3) Ada.Containers.Indefinite_Doubly_Linke d_Lists A.18.12(2/3) Ada.Containers.Indefinite_Hashed_Maps A.18.13(2/3) Ada.Containers.Indefinite_Hashed_Sets A.18.15(2/3) Ada.Interrupts C.3.2(2/3) Ada.Interrupts.Names C.3.2(12) Ada.IO_Exceptions A.13(3) Ada.Iterator_Interfaces 5.5.1(2/3) Ada.Locales A.19(3/3) Ada.Numerics A.5(3/2) Ada.Numerics.Complex_Arrays Ada.Strings.Fixed.Less_Case_Insensitive A.4.9(11.5/3) A.4.10(16/3) Ada.Strings.Hash A.4.9(2/3) Ada.Strings.Hash_Case_Insensitive A.4.9(11.2/3) Ada.Strings.Less_Case_Insensitive A.4.10(13/3) Ada.Strings.Maps A.4.2(3/2) Ada.Strings.Maps.Constants A.4.6(3/2) Ada.Strings.Unbounded A.4.5(3) Ada.Strings.Unbounded.Equal_Case_Inse nsitive A.4.10(10/3) Ada.Strings.Unbounded.Hash A.4.9(10/3) Ada.Strings.Unbounded.Hash_Case_Insen sitive A.4.9(11.10/3) Ada.Containers.Indefinite_Holders G.3.2(53/2) Ada.Strings.Unbounded.Less_Case_Insen A.18.18(5/3) Ada.Numerics.Complex_Elementary_- sitive A.4.10(21/3) Ada.Containers.Indefinite_Multiway_Tree Functions G.1.2(9/1) s A.18.17(2/3) Ada.Numerics.Complex_Types Ada.Strings.UTF_Encoding A.4.11(3/3) Ada.Strings.UTF_Encoding.Conversions Ada.Containers.Indefinite_Ordered_Maps G.1.1(25/1) A.4.11(15/3) A.18.14(2/3) Ada.Numerics.Discrete_Random Ada.Strings.UTF_Encoding.Strings Ada.Containers.Indefinite_Ordered_Sets A.5.2(17) A.4.11(22/3) A.18.16(2/3) Ada.Numerics.Elementary_Functions Ada.Strings.UTF_Encoding.Wide_Strings Ada.Containers.Indefinite_Vectors A.5.1(9/1) A.4.11(30/3) A.18.11(2/3) Ada.Containers.Multiway_Trees A.18.10(7/3) Ada.Numerics.Float_Random A.5.2(5) Ada.Numerics.Generic_Complex_Arrays G.3.2(2/2) Ada.Containers.Ordered_Maps Ada.Numerics.Generic_Complex_- Ada.Strings.UTF_Encoding.Wide_Wide_ Strings A.4.11(38/3) Ada.Strings.Wide_Bounded A.4.7(1/3) Ada.Strings.Wide_Bounded.Wide_- A.18.6(2/3) Ada.Containers.Ordered_Sets Elementary_Functions G.1.2(2/2) Ada.Numerics.Generic_Complex_Types Equal_Case_Insensitive A.4.7(1/3) Ada.Strings.Wide_Bounded.Wide_Hash A.18.9(2/3) G.1.1(2/1) A.4.7(1/3) Index 13 December 2012 868 Ada Reference Manual — 2012 Edition Ada.Strings.Wide_Bounded.Wide_- Ada.Strings.Wide_Wide_- Hash_Case_Insensitive A.4.7(1/3) Ada.Strings.Wide_- Unbounded.Wide_Wide_- Equal_Case_Insensitive A.4.8(1/3) Equal_Case_Insensitive A.4.7(1/3) Ada.Strings.Wide_Wide_- Ada.Strings.Wide_Fixed A.4.7(1/3) Ada.Strings.Wide_Fixed.Wide_- Unbounded.Wide_Wide_Hash A.4.8(1/3) Equal_Case_Insensitive A.4.7(1/3) Ada.Strings.Wide_Wide_- Ada.Strings.Wide_Fixed.Wide_Hash A.4.7(1/3) Ada.Strings.Wide_Fixed.Wide_- Hash_Case_Insensitive A.4.7(1/3) Ada.Strings.Wide_Hash A.4.7(1/3) Ada.Strings.Wide_- Hash_Case_Insensitive A.4.7(1/3) Ada.Strings.Wide_Maps A.4.7(3) Ada.Strings.Wide_Maps.Wide_- Constants A.4.7(1/3), A.4.8(28/2) Ada.Strings.Wide_Unbounded A.4.7(1/3) Ada.Strings.Wide_Unbounded.Wide_- Equal_Case_Insensitive A.4.7(1/3) Ada.Strings.Wide_Unbounded.Wide_- Hash A.4.7(1/3) Ada.Strings.Wide_Unbounded.Wide_- Hash_Case_Insensitive A.4.7(1/3) Ada.Strings.Wide_Wide_Bounded Unbounded.Wide_Wide_- Hash_Case_Insensitive A.4.8(1/3) Ada.Synchronous_Barriers D.10.1(3/3) Ada.Synchronous_Task_Control D.10(3/2) Ada.Synchronous_Task_Control.EDF D.10(5.2/3) Ada.Tags 3.9(6/2) Ada.Tags.Generic_Dispatching_- Constructor 3.9(18.2/3) Ada.Task_Attributes C.7.2(2) Ada.Task_Identification C.7.1(2/2) Ada.Task_Termination C.7.3(2/2) Ada.Text_IO A.10.1(2) Ada.Text_IO.Bounded_IO A.10.11(3/2) Ada.Text_IO.Complex_IO G.1.3(3) Ada.Text_IO.Editing F.3.3(3) Ada.Text_IO.Text_Streams A.12.2(3) Ada.Text_IO.Unbounded_IO A.4.8(1/3) A.10.12(3/2) Ada.Strings.Wide_Wide_- Bounded.Wide_Wide_- Equal_Case_Insensitive A.4.8(1/3) Ada.Strings.Wide_Wide_- Bounded.Wide_Wide_Hash A.4.8(1/3) Ada.Strings.Wide_Wide_- Bounded.Wide_Wide_- Hash_Case_Insensitive A.4.8(1/3) Ada.Strings.Wide_Wide_- Ada.Unchecked_Conversion 13.9(3/3) Ada.Unchecked_Deallocate_Subpool child of Ada 13.11.5(3/3) Ada.Unchecked_Deallocation 13.11.2(3/3) Ada.Wide_Characters A.3.1(4/2) Ada.Wide_Characters.Handling A.3.5(3/3) Ada.Wide_Text_IO A.11(2/2) Ada.Wide_Text_IO.Bounded_IO Equal_Case_Insensitive A.4.8(1/3) A.11(4/3) Ada.Strings.Wide_Wide_Fixed Ada.Wide_Text_IO.Complex_IO A.4.8(1/3) G.1.4(1) Ada.Strings.Wide_Wide_- Fixed.Wide_Wide_- Equal_Case_Insensitive A.4.8(1/3) Ada.Wide_Text_IO.Editing F.3.4(1) Ada.Wide_Text_IO.Text_Streams A.12.3(3) Ada.Strings.Wide_Wide_- Ada.Wide_Text_IO.Unbounded_IO Ada_To_COBOL in Interfaces.COBOL B.4(14) adafinal B.1(39/3) adainit B.1(39/3) Add in Ada.Execution_Time.Group_Budgets D.14.2(9/2) Add_Task in Ada.Execution_Time.Group_Budgets D.14.2(8/2) address arithmetic 13.7.1(6) comparison 13.7(14/3) in System 13.7(12) Address aspect 13.3(12) Address attribute 13.3(11), J.7.1(5) Address clause 13.3(7/2), 13.3(12) Address_To_Access_Conversions child of System 13.7.2(2) Adjacent attribute A.5.3(48) Adjust 7.6(2) in Ada.Finalization 7.6(6/2) adjusting the value of an object 7.6(15), 7.6(16/3) adjustment 7.6(15), 7.6(16/3) as part of assignment 5.2(14/3) ADT (abstract data type) See private types and private extensions 7.3(1) See also abstract type 3.9.3(1/2) advice 1.1.2(37) Aft attribute 3.5.10(5) aggregate 4.3(1), 4.3(2) used 4.4(7/3), 4.7(2), P See also composite type 3.2(2/2) aliased 3.10(9/3), N(3) aliasing See distinct access paths 6.2(12/3) Alignment in Ada.Strings A.4.1(6) Alignment (subtype) aspect 13.3(26.4/2) Alignment attribute 13.3(23/2), Fixed.Wide_Wide_Hash A.4.8(1/3) A.11(5/3) 13.3(26.2/2) Ada.Wide_Wide_Characters A.3.1(6/2) Ada.Wide_Wide_Characters.Handling Alignment clause 13.3(7/2), 13.3(25/2), 13.3(26.4/2) Ada.Strings.Wide_Wide_- Fixed.Wide_Wide_- Hash_Case_Insensitive A.4.8(1/3) Ada.Strings.Wide_Wide_Hash A.4.8(1/3) A.3.6(1/3) Ada.Wide_Wide_Text_IO A.11(3/2) Ada.Wide_Wide_Text_IO.Bounded_IO Ada.Strings.Wide_Wide_- A.11(4/3) Hash_Case_Insensitive A.4.8(1/3) Ada.Wide_Wide_Text_IO.Complex_IO Ada.Strings.Wide_Wide_Maps G.1.5(1/2) All_Calls_Remote aspect E.2.3(16/3) All_Calls_Remote pragma E.2.3(5), L(2) All_Checks 11.5(25/3) Allocate in System.Storage_Pools 13.11(7) in System.Storage_Pools.Subpools A.4.8(3/2) Ada.Wide_Wide_Text_IO.Editing 13.11.4(14/3) Ada.Strings.Wide_Wide_- F.3.5(1/2) Maps.Wide_Wide_Constants A.4.8(1/3) Ada.Strings.Wide_Wide_Unbounded Ada.Wide_Wide_Text_IO.Text_Streams A.12.4(3/2) Ada.Wide_Wide_- A.4.8(1/3) Text_IO.Unbounded_IO A.11(5/3) Allocate_From_Subpool in System.Storage_Pools.Subpools 13.11.4(11/3) Allocation_Check 11.5(19.2/2) [partial] 4.8(10.2/2), 4.8(10.3/2), 4.8(10.4/3), 13.11.4(30/3) 869 13 December 2012 Index Ada Reference Manual — 2012 Edition allocator 4.8(2/3) used 4.4(7/3), P Alphanumeric in Interfaces.COBOL B.4(16/3) alphanumeric character a category of Character A.3.2(31) Alphanumeric_Set in Ada.Strings.Maps.Constants A.4.6(4) ambiguous 8.6(30) ambiguous cursor of a vector A.18.2(240/2) ampersand 2.1(15/3) in Ada.Characters.Latin_1 A.3.3(8) ampersand operator 4.4(1/3), 4.5.3(3) ancestor N(3.1/2) of a library unit 10.1.1(11) of a tree node A.18.10(4/3) of a type 3.4.1(10/2) ultimate 3.4.1(10/2) ancestor subtype of a formal derived type 12.5.1(5/3) of a private_extension_declaration 7.3(8) ancestor type of an extension_aggregate 4.3.2(5/3) Ancestor_Find in Ada.Containers.Multiway_Trees A.18.10(40/3) ancestor_part 4.3.2(3) used 4.3.2(2), P and operator 4.4(1/3), 4.5.1(2) and then (short-circuit control form) 4.4(1/3), 4.5.1(1) angle threshold G.2.4(10) Annex informative 1.1.2(18) normative 1.1.2(14) Specialized Needs 1.1.2(7) Annotated Ada Reference Manual 0.2(5/3) anonymous access type 3.10(12/3) anonymous allocator 3.10.2(14/3) anonymous array type 3.3.1(1/3) anonymous protected type 3.3.1(1/3) anonymous task type 3.3.1(1/3) anonymous type 3.2.1(7/2) Any_Priority subtype of Integer in System 13.7(16) APC in Ada.Characters.Latin_1 A.3.3(19) apostrophe 2.1(15/3) in Ada.Characters.Latin_1 A.3.3(8) Append in Ada.Containers.Doubly_Linked_- Lists A.18.3(23/2) in Ada.Containers.Vectors A.18.2(46/2), A.18.2(47/2) in Ada.Strings.Bounded A.4.4(13), A.4.4(14), A.4.4(15), A.4.4(16), A.4.4(17), A.4.4(18), A.4.4(19), A.4.4(20) Arcsinh in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(7) in Ada.Numerics.Generic_Elementary_- in Ada.Strings.Unbounded A.4.5(12), Functions A.5.1(7) A.4.5(13), A.4.5(14) Append_Child in Ada.Containers.Multiway_Trees A.18.10(52/3) applicable index constraint 4.3.3(10) application areas 1.1.2(7) applies aspect 13.1.1(23/3), 13.1.1(27/3), 13.1.1(29/3), 13.1.1(30/3) apply to a callable construct by a return statement 6.5(4/2) to a loop_statement by an exit_statement 5.7(4) to a program unit by a program unit pragma 10.1.5(2) arbitrary order 1.1.4(18) allowed 2.8(12), 3.3.1(20/2), 3.5(9), 3.6(22/2), 3.11(10/1), 3.11(11/3), 3.11(13), 4.1.1(7), 4.1.2(7), 4.3(5), 4.3.1(19), 4.3.2(7), 4.3.3(22), 4.3.3(23), 4.5.2(27/3), 4.8(10/2), 5.2(7), 6.1.1(26/3), 6.1.1(34/3), 6.1.1(35/3), 6.4(10/2), 6.4.1(17), 7.6(12), 7.6(16/3), 7.6.1(9/3), 7.6.1(11.1/3), 7.6.1(20.2/3), 9.7.1(15), 9.8(4), 12.3(20), 13.11.5(7/3), K.2(164.2/3) Arccos in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(5) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(6) Arccosh in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(7) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(7) Arccot in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(5) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(6) Arccoth in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(7) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(7) Arcsin in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(5) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(6) Arctan in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(5) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(6) Arctanh in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(7) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(7) Argument in Ada.Command_Line A.15(5) in Ada.Numerics.Generic_Complex_- Arrays G.3.2(10/2), G.3.2(31/2) in Ada.Numerics.Generic_Complex_- Types G.1.1(10) argument of a pragma 2.8(9) Argument_Count in Ada.Command_Line A.15(4) Argument_Error in Ada.Numerics A.5(3/2) Arithmetic child of Ada.Calendar 9.6.1(8/2) array 3.6(1) array component expression 4.3.3(6) array component iterator 5.5.2(3/3) array for a loop 5.5.2(11/3) array indexing See indexed_component 4.1.1(1) array slice 4.1.2(1) array type 3.6(1), N(4) array_aggregate 4.3.3(2) used 4.3(2), 13.4(3), P array_component_association 4.3.3(5/2) used 4.3.3(4), P array_type_definition 3.6(2) used 3.2.1(4/2), 3.3.1(2/3), 12.5.3(2), P ASCII package physically nested within the declaration of Standard A.1(36.3/2) in Standard A.1(36.3/2) aspect 13.1(0.1/3), K.1(1/3), N(4.1/3) interfacing B.1(0.1/3) predicate 3.2.4(1/3) aspect of representation 13.1(8/3) aspect_clause 13.1(2/1) used 3.8(5/1), 3.11(4/1), 9.1(5/1), 9.4(5/1), 9.4(8/1), P aspect_definition 13.1.1(4/3) used 13.1.1(2/3), P aspect_mark 13.1.1(3/3) used 2.8(3/3), 11.4.2(6.1/3), 13.1.1(2/3), L(2.3/3), P aspect_specification 13.1.1(2/3) Index 13 December 2012 870 Ada Reference Manual — 2012 Edition used 3.2.1(3/3), 3.2.2(2/3), 3.3.1(2/3), 3.8(6/3), 3.9.3(1.1/3), 6.1(2/3), 6.3(2/3), 6.7(2/3), 6.8(2/3), 7.1(3/3), 7.2(2/3), 7.3(2/3), 7.3(3/3), 8.5.1(2/3), 8.5.2(2/3), 8.5.3(2/3), 8.5.4(2/3), 8.5.5(2/3), 9.1(2/3), 9.1(3/3), 9.1(6/3), 9.4(2/3), 9.4(3/3), 9.4(7/3), 9.5.2(2/3), 10.1.3(3/3), 10.1.3(4), 10.1.3(5), 10.1.3(6), 11.1(2/3), 12.1(3/3), 12.3(2/3), 12.4(2/3), 12.5(2.1/3), 12.6(2.1/3), 12.6(2.2/3), 12.7(2/3), P aspects Address 13.3(12) Alignment (subtype) 13.3(26.4/2) All_Calls_Remote E.2.3(16/3) Asynchronous E.4.1(8.1/3) Atomic C.6(6.2/3) Atomic_Components C.6(6.6/3) Attach_Handler C.3.1(6.3/3) Bit_Order 13.5.3(4) Coding 13.4(7) Component_Size 13.3(70) Constant_Indexing 4.1.6(2/3) Convention B.1(2/3) CPU D.16(8/3) Default_Component_Value 3.6(22.2/3) Default_Iterator 5.5.1(8/3) Default_Storage_Pool 13.11.3(5/3) Default_Value 3.5(56.3/3) Dispatching_Domain D.16.1(18/3) Dynamic_Predicate 3.2.4(1/3) Elaborate_Body 10.2.1(26.1/3) Export B.1(1/3) External_Name B.1(1/3) External_Tag 13.3(75/3), K.2(65) Implicit_Dereference 4.1.5(2/3) Import B.1(1/3) Independent C.6(6.3/3) Independent_Components C.6(6.9/3) Inline 6.3.2(5.1/3) Input 13.13.2(38/3) Interrupt_Handler C.3.1(6.2/3) Interrupt_Priority D.1(6.3/3) Iterator_Element 5.5.1(9/3) Layout 13.5(1) Link_Name B.1(1/3) Machine_Radix F.1(1) No_Return 6.5.1(3.2/3) Output 13.13.2(38/3) Pack 13.2(5.1/3) Post 6.1.1(4/3) Post'Class 6.1.1(5/3) Pre 6.1.1(2/3) Pre'Class 6.1.1(3/3) Preelaborate 10.2.1(11/3) Priority D.1(6.2/3) Pure 10.2.1(17/3) Read 13.13.2(38/3) Record layout 13.5(1) Relative_Deadline D.2.6(9.2/3) Remote_Call_Interface E.2.3(7/3) Remote_Types E.2.2(4/3) Shared_Passive E.2.1(4/3) Size (object) 13.3(41) Size (subtype) 13.3(48) Small 3.5.10(2/1) Static_Predicate 3.2.4(1/3) Storage_Pool 13.11(15) Storage_Size (access) 13.11(15) Storage_Size (task) 13.3(65.2/3) Stream_Size 13.13.2(1.5/2) Synchronization 9.5(12/3) Type_Invariant 7.3.2(2/3) Type_Invariant'Class 7.3.2(3/3) Unchecked_Union B.3.3(3.2/3) Variable_Indexing 4.1.6(3/3) Volatile C.6(6.4/3) Volatile_Components C.6(6.7/3) Write 13.13.2(38/3) assembly language C.1(4/3) Assert in Ada.Assertions 11.4.2(14/2) Assert pragma 11.4.2(3/2), L(2.1/2) assertion N(4.2/3) assertion expressions 11.4.2(1.1/3) assertion policy Assert pragma 11.4.2(18/3) Assertion_Error raised by failure of assertion 11.4.2(18/3) raised by failure of run-time check 3.2.4(31/3), 4.6(57/3), 6.1.1(32/3), 6.1.1(33/3), 6.1.1(35/3), 7.3.2(22/3) in Ada.Assertions 11.4.2(13/2) Assertion_Policy pragma 11.4.2(6.1/3), 11.4.2(6/2), L(2.2/2), L(2.3/3) assertions 11.4.2(1.1/3) child of Ada 11.4.2(12/2) Assign in Ada.Containers.Doubly_Linked_- Lists A.18.3(17.5/3) in Ada.Containers.Hashed_Maps in Ada.Containers.Hashed_Sets A.18.5(17.7/3) A.18.8(17.3/3) A.18.18(20/3) in Ada.Containers.Indefinite_Holders in Ada.Containers.Multiway_Trees assigning back of parameters 6.4.1(17) assignment user-defined 7.6(1) assignment operation 5.2(3), 5.2(12), 7.6(13) during elaboration of an object_declaration 3.3.1(18/2) during evaluation of a generic_association for a formal object of mode in 12.4(11) during evaluation of a parameter_association 6.4.1(11) during evaluation of an aggregate 4.3(5) during evaluation of an initialized allocator 4.8(7/2) during evaluation of an uninitialized allocator 4.8(9/2) during evaluation of concatenation 4.5.3(10) during execution of a for loop 5.5(9/3) during execution of an assignment_statement 5.2(12) during parameter copy back 6.4.1(17) assignment_statement 5.2(2) used 5.1(4/2), P associated components of a record_component_association 4.3.1(10) associated declaration of an aspect specification 13.1.1(1/3) associated discriminants of a named discriminant_association 3.7.1(5) of a positional discriminant_association 3.7.1(5) associated entity of an aspect specification 13.1.1(5/3) associated object of a value of a by-reference type 6.2(10/3) asterisk 2.1(15/3) in Ada.Characters.Latin_1 A.3.3(8) asynchronous remote procedure call E.4.1(9/3) Asynchronous aspect E.4.1(8.1/3) Asynchronous pragma J.15.13(2/3), L(3.1/3) A.18.10(32/3) asynchronous remote procedure call in Ada.Containers.Ordered_Maps in Ada.Containers.Ordered_Sets A.18.6(16.7/3) A.18.9(16.3/3) in Ada.Containers.Vectors A.18.2(34.7/3) See assignment operation 5.2(3) Assign_Task in System.Multiprocessors.Dispatching_ Domains D.16.1(11/3) E.4(1) asynchronous_select 9.7.4(2) used 9.7(2), P Asynchronous_Task_Control child of Ada D.11(3/2) at-most-once execution E.4(11) at_clause J.7(1) used 13.1(2/1), P atomic C.6(7/3) Atomic aspect C.6(6.2/3) Atomic pragma J.15.8(2/3), L(4.1/3) 871 13 December 2012 Index Ada Reference Manual — 2012 Edition Atomic_Components aspect C.6(6.6/3) Atomic_Components pragma J.15.8(5/3), L(5.1/3) Attach_Handler in Ada.Interrupts C.3.2(7) Attach_Handler aspect C.3.1(6.3/3) Attach_Handler pragma J.15.7(4/3), L(6.1/3) attaching to an interrupt C.3(2) attribute 4.1.4(1), K.2(1/3) representation 13.3(1/1) specifiable 13.3(5/3) specifying 13.3(1/1) attribute_definition_clause 13.3(2) used 13.1(2/1), P attribute_designator 4.1.4(3/2) used 4.1.4(2), 13.1(3), 13.3(2), P Attribute_Handle in Ada.Task_Attributes C.7.2(3) attribute_reference 4.1.4(2) used 4.1(2/3), P attributes Access 3.10.2(24/1), 3.10.2(32/3) Address 13.3(11), J.7.1(5) Adjacent A.5.3(48) Aft 3.5.10(5) Alignment 13.3(23/2), 13.3(26.2/2) Base 3.5(15) Bit_Order 13.5.3(4) Body_Version E.3(4) Callable 9.9(2) Caller C.7.1(14/3) Ceiling A.5.3(33) Class 3.9(14), 7.3.1(9), J.11(2/2) Component_Size 13.3(69) Compose A.5.3(24) Constrained 3.7.2(3/3), J.4(2) Copy_Sign A.5.3(51) Count 9.9(5) Definite 12.5.1(23/3) Delta 3.5.10(3) Denorm A.5.3(9) Digits 3.5.8(2/1), 3.5.10(7) Exponent A.5.3(18) External_Tag 13.3(75/3) First 3.5(12), 3.6.2(3) First(N) 3.6.2(4) First_Bit 13.5.2(3/2) First_Valid 3.5.5(7.2/3) Floor A.5.3(30) Fore 3.5.10(4) Fraction A.5.3(21) Has_Same_Storage 13.3(73.2/3) Identity 11.4.1(9), C.7.1(12) Image 3.5(35) Input 13.13.2(22), 13.13.2(32) Last 3.5(13), 3.6.2(5) Last(N) 3.6.2(6) Last_Bit 13.5.2(4/2) Last_Valid 3.5.5(7.3/3) Leading_Part A.5.3(54) Length 3.6.2(9) Length(N) 3.6.2(10) Machine A.5.3(60) Machine_Emax A.5.3(8) Machine_Emin A.5.3(7) Machine_Mantissa A.5.3(6) Machine_Overflows A.5.3(12), A.5.4(4) Machine_Radix A.5.3(2), A.5.4(2) Machine_Rounding A.5.3(41.1/2) Machine_Rounds A.5.3(11), A.5.4(3) Max 3.5(19) Max_Alignment_For_Allocation 13.11.1(4/3) Max_Size_In_Storage_Elements 13.11.1(3/3) Min 3.5(16) Mod 3.5.4(16.1/2) Model A.5.3(68), G.2.2(7) Model_Emin A.5.3(65), G.2.2(4) Model_Epsilon A.5.3(66) Model_Mantissa A.5.3(64), G.2.2(3/2) Model_Small A.5.3(67) Modulus 3.5.4(17) Old 6.1.1(26/3) Output 13.13.2(19), 13.13.2(29) Overlaps_Storage 13.3(73.6/3) Partition_Id E.1(9) Pos 3.5.5(2) Position 13.5.2(2/2) Pred 3.5(25) Priority D.5.2(3/2) Range 3.5(14), 3.6.2(7) Range(N) 3.6.2(8) Read 13.13.2(6), 13.13.2(14) Remainder A.5.3(45) Result 6.1.1(29/3) Round 3.5.10(12) Rounding A.5.3(36) Safe_First A.5.3(71), G.2.2(5) Safe_Last A.5.3(72), G.2.2(6) Scale 3.5.10(11) Scaling A.5.3(27) Signed_Zeros A.5.3(13) Size 13.3(40), 13.3(45) Small 3.5.10(2/1) Storage_Pool 13.11(13) Storage_Size 13.3(60/3), 13.11(14), J.9(2) Stream_Size 13.13.2(1.2/3) Succ 3.5(22) Tag 3.9(16), 3.9(18) Terminated 9.9(3) Truncation A.5.3(42) Unbiased_Rounding A.5.3(39) Unchecked_Access 13.10(3), H.4(18) Val 3.5.5(5) Valid 13.9.2(3/3), H(6) Value 3.5(52) Version E.3(3) Wide_Image 3.5(28) Wide_Value 3.5(40) Wide_Wide_Image 3.5(27.1/2) Wide_Wide_Value 3.5(39.1/2) Wide_Wide_Width 3.5(37.1/2) Wide_Width 3.5(38) Width 3.5(39) Write 13.13.2(3), 13.13.2(11) available stream attribute 13.13.2(39/2) B Backus-Naur Form (BNF) complete listing P cross reference P notation 1.1.4(3) under Syntax heading 1.1.2(25) Barrier_Limit subtype of Positive in Ada.Synchronous_Barriers D.10.1(4/3) base 2.4.2(3), 2.4.2(6) used 2.4.2(2), P base 16 literal 2.4.2(1) base 2 literal 2.4.2(1) base 8 literal 2.4.2(1) Base attribute 3.5(15) base decimal precision of a floating point type 3.5.7(9) of a floating point type 3.5.7(10) base priority D.1(15) base range of a decimal fixed point type 3.5.9(16) of a fixed point type 3.5.9(12) of a floating point type 3.5.7(8), 3.5.7(10) of a modular type 3.5.4(10) of a scalar type 3.5(6) of a signed integer type 3.5.4(9) of an ordinary fixed point type 3.5.9(13) base subtype of a type 3.5(15) Base_Name in Ada.Directories A.16(19/2) based_literal 2.4.2(2) used 2.4(2), P based_numeral 2.4.2(4) used 2.4.2(2), P basic letter a category of Character A.3.2(27) basic_declaration 3.1(3/3) used 3.11(4/1), P basic_declarative_item 3.11(4/1) used 3.11(3), 7.1(3/3), P Basic_Map in Ada.Strings.Maps.Constants A.4.6(5) Index 13 December 2012 872 Ada Reference Manual — 2012 Edition Basic_Set in Ada.Strings.Maps.Constants A.4.6(4) become nonlimited 7.3.1(5/1), 7.5(16) BEL in Ada.Characters.Latin_1 A.3.3(5) belong to a range 3.5(4) to a subtype 3.2(8/2) belongs subpool to a pool 13.11.4(20/3) bibliography 1.2(1/3) big endian 13.5.3(2) binary literal 2.4.2(1) in Interfaces.COBOL B.4(10) binary adding operator 4.5.3(1) binary literal 2.4.2(1) binary operator 4.5(9) binary_adding_operator 4.5(4) used 4.4(4), P Binary_Format in Interfaces.COBOL B.4(24) bit field See record_representation_clause 13.5.1(1) bit ordering 13.5.3(2) bit string See logical operators on boolean arrays Suspend_Until_True D.10(10) BMP 3.5.2(2/3), 3.5.2(3/3) BNF (Backus-Naur Form) complete listing P cross reference P notation 1.1.4(3) under Syntax heading 1.1.2(25) body 3.11(5), 3.11.1(1/3) used 3.11(3), P body_stub 10.1.3(2) used 3.11(5), P Body_Version attribute E.3(4) BOM_16 in Ada.Strings.UTF_Encoding A.4.11(12/3) BOM_16BE in Ada.Strings.UTF_Encoding A.4.11(10/3) BOM_16LE in Ada.Strings.UTF_Encoding A.4.11(11/3) BOM_8 in Ada.Strings.UTF_Encoding A.4.11(9/3) Boolean 3.5.3(1) in Standard A.1(5) boolean type 3.5.3(1) Bounded child of Ada.Strings A.4.4(3) bounded error 1.1.2(31), 1.1.5(8) cause 4.8(11.1/2), 6.2(12/3), 4.5.1(2) Bit_Order in System 13.7(15/2) Bit_Order aspect 13.5.3(4) Bit_Order attribute 13.5.3(4) Bit_Order clause 13.3(7/2), 13.5.3(4) blank in text input for enumeration and numeric types A.10.6(5/2) Blank_When_Zero in Ada.Text_IO.Editing F.3.3(7) block_statement 5.6(2) used 5.1(5/2), P blocked [partial] D.2.1(11/3) a task state 9(10) during an entry call 9.5.3(19) execution of a selective_accept 9.7.1(16) on a delay_statement 9.6(21) on an accept_statement 9.5.2(24) waiting for activations to complete 9.2(5) 7.6.1(14/1), 9.4(20.1/2), 9.5.1(8), 9.8(20/3), 10.2(26), 13.9.1(9), 13.11.2(11), A.17(25/2), A.18.2(238/3), A.18.2(239/2), A.18.2(243/2), A.18.3(152.1/3), A.18.3(152.2/3), A.18.3(152/2), A.18.4(75.1/3), A.18.4(75.2/3), A.18.7(96.13/3), A.18.7(96.14/3), A.18.10(220/3), A.18.10(221/3), A.18.18(68/3), A.18.18(69/3), A.18.19(10/3), A.18.20(14/3), A.18.21(15/3), A.18.22(12/3), A.18.23(15/3), A.18.24(12/3), A.18.25(14/3), C.7.1(17/3), C.7.2(13.2/1), D.2.6(30/2), D.3(13.1/2), E.1(10/2), E.3(6), J.7.1(11) Bounded_IO child of Ada.Text_IO A.10.11(3/2) child of Ada.Wide_Text_IO A.11(4/3) child of Ada.Wide_Wide_Text_IO waiting for dependents to terminate A.11(4/3) 9.3(5) blocked interrupt C.3(2) blocking, potentially 9.5.1(8) Abort_Task C.7.1(16) delay_statement 9.6(34), D.9(5) remote subprogram call E.4(17) RPC operations E.5(23) Bounded_Priority_Queues child of Ada.Containers A.18.31(2/3) Bounded_Slice in Ada.Strings.Bounded A.4.4(28.1/2), A.4.4(28.2/2) Bounded_String in Ada.Strings.Bounded A.4.4(6) Bounded_Synchronized_Queues child of Ada.Containers A.18.29(2/3) bounds of a discrete_range 3.6.1(6) of an array 3.6(13) of the index range of an array_aggregate 4.3.3(24) box compound delimiter 3.6(15) BPH in Ada.Characters.Latin_1 A.3.3(17) broadcast signal See protected object 9.4(1) See requeue 9.5.4(1) Broken_Bar in Ada.Characters.Latin_1 A.3.3(21/3) BS in Ada.Characters.Latin_1 A.3.3(5) budget D.14.2(14/2) Budget_Has_Expired in Ada.Execution_Time.Group_Budgets D.14.2(9/2) Budget_Remaining in Ada.Execution_Time.Group_Budgets D.14.2(9/2) Buffer_Size in Ada.Storage_IO A.9(4) Buffer_Type subtype of Storage_Array in Ada.Storage_IO A.9(4) build-in-place See built in place built in place 7.6(17.1/3) by copy parameter passing 6.2(2) by reference parameter passing 6.2(2) by-copy type 6.2(3/3) by-reference type 6.2(4) atomic or volatile C.6(18) Byte in Interfaces.COBOL B.4(29/3) See storage element 13.3(8) byte sex See ordering of storage elements in a word 13.5.3(5) Byte_Array in Interfaces.COBOL B.4(29/3) C C child of Interfaces B.3(4) C interface B.3(1/3) C standard 1.2(7/3) C++ standard 1.2(9/3) C_float in Interfaces.C B.3(15) Calendar child of Ada 9.6(10) call 6(2/3) 873 13 December 2012 Index Ada Reference Manual — 2012 Edition master of 3.10.2(10.1/3) call on a dispatching operation 3.9.2(2/3) callable 9.9(2) Callable attribute 9.9(2) callable construct 6(2/3) callable entity 6(2/3) called partition E.4(1) Caller attribute C.7.1(14/3) calling convention 6.3.1(2/1), B.1(11/3) Ada 6.3.1(3/3) associated with a designated profile 3.10(11) entry 6.3.1(13) Intrinsic 6.3.1(4) protected 6.3.1(12) calling partition E.4(1) calling stub E.4(10) CAN in Ada.Characters.Latin_1 A.3.3(6) Cancel_Handler in Ada.Execution_Time.Group_Budgets D.14.2(10/2) in Ada.Execution_Time.Timers D.14.1(7/2) in Ada.Real_Time.Timing_Events D.15(5/2) cancellation of a delay_statement 9.6(22/3) of an entry call 9.5.3(20) cancellation of a remote subprogram call E.4(13) canonical form A.5.3(3) canonical order of array components 5.5.2(11/3) canonical semantics 11.6(2/3) canonical-form representation A.5.3(10) capacity of a hashed map A.18.5(41/2) of a hashed set A.18.8(63/2) of a queue A.18.27(10/3) of a vector A.18.2(2/2) in Ada.Containers.Hashed_Maps A.18.5(8/2) in Ada.Containers.Hashed_Sets A.18.8(10/2) in Ada.Containers.Vectors A.18.2(19/2) Capacity_Error in Ada.Containers A.18.1(5.1/3) case insensitive 2.3(5/3) case_expression 4.5.7(5/3) used 4.5.7(2/3), P case_expression_alternative 4.5.7(6/3) used 4.5.7(5/3), P case_statement 5.4(2/3) used 5.1(5/2), P case_statement_alternative 5.4(3) used 5.4(2/3), P cast See type conversion 4.6(1/3) See unchecked type conversion 13.9(1) catch (an exception) See handle 11(1/3) categorization aspect E.2(2/3) categorization pragma E.2(2/3) Remote_Call_Interface E.2.3(2) Remote_Types E.2.2(2) Shared_Passive E.2.1(2) categorized library unit E.2(2/3) category of types 3.2(2/2), 3.4(1.1/2) category (of types) N(4.3/2) category determined for a formal type 12.5(6/3) catenation operator See concatenation operator 4.4(1/3) See concatenation operator 4.5.3(3) Cause_Of_Termination in Ada.Task_Termination C.7.3(3/2) CCH in Ada.Characters.Latin_1 A.3.3(18) cease to exist object 7.6.1(11/3), 13.11.2(10/2) type 7.6.1(11/3) Cedilla in Ada.Characters.Latin_1 A.3.3(22) Ceiling in Ada.Containers.Ordered_Maps CHAR_BIT in Interfaces.C B.3(6) Character 3.5.2(2/3) used 2.7(2), P in Standard A.1(35/3) character encoding A.4.11(46/3) character plane 2.1(1/3) character set 2.1(1/3) character set standard 16 and 32-bit 1.2(8/3) 7-bit 1.2(2) 8-bit 1.2(6/3) control functions 1.2(5) character type 3.5.2(1), N(5) character_literal 2.5(2) used 3.5.1(4), 4.1(2/3), 4.1.3(3), P Character_Mapping in Ada.Strings.Maps A.4.2(20/2) Character_Mapping_Function in Ada.Strings.Maps A.4.2(25) Character_Range in Ada.Strings.Maps A.4.2(6) Character_Ranges in Ada.Strings.Maps A.4.2(7) Character_Sequence subtype of String in Ada.Strings.Maps A.4.2(16) Character_Set in Ada.Strings.Maps A.4.2(4/2) in Ada.Strings.Wide_Maps A.4.7(46/2) in Ada.Strings.Wide_Maps.Wide_- A.18.6(41/2) in Ada.Containers.Ordered_Sets A.18.9(51/2), A.18.9(71/2) Ceiling attribute A.5.3(33) ceiling priority of a protected object D.3(8/3) Ceiling_Check [partial] C.3.1(11/3), D.3(13) Ceiling_Locking locking policy D.3(7) Cent_Sign in Ada.Characters.Latin_1 A.3.3(21/3) change of representation 13.6(1/3) char in Interfaces.C B.3(19) char16_array in Interfaces.C B.3(39.5/3) char16_nul in Interfaces.C B.3(39.3/2) char16_t in Interfaces.C B.3(39.2/2) char32_array in Interfaces.C B.3(39.14/3) char32_nul in Interfaces.C B.3(39.12/2) char32_t in Interfaces.C B.3(39.11/2) char_array in Interfaces.C B.3(23/3) char_array_access in Interfaces.C.Strings B.3.1(4) Constants A.4.8(48/2) in Interfaces.Fortran B.5(11) Character_Set_Version in Ada.Wide_Characters.Handling A.3.5(4/3) characteristics [partial] 3.4(7/3) Characters child of Ada A.3.1(2) chars_ptr in Interfaces.C.Strings B.3.1(5/2) chars_ptr_array in Interfaces.C.Strings B.3.1(6/2) check language-defined 11.5(2/3), 11.6(1/3) check, language-defined Access_Check 4.1(13), 4.1.5(8/3), 4.6(51/3), 4.8(10.4/3) Accessibility_Check 3.10.2(29), 4.6(39.1/2), 4.6(48/3), 4.8(10.1/3), 6.5(8/3), 6.5(21/3), 13.11.4(25/3), 13.11.4(26/3), E.4(18/1) Allocation_Check 4.8(10.2/2), 4.8(10.3/2), 4.8(10.4/3), 13.11.4(30/3) Ceiling_Check C.3.1(11/3), D.3(13) controlled by assertion policy 3.2.4(31/3), 4.6(51/3), 6.1.1(32/3), 6.1.1(33/3), 6.1.1(35/3), 7.3.2(9/3) Index 13 December 2012 874 Ada Reference Manual — 2012 Edition Discriminant_Check 4.1.3(15), 4.3(6), 4.3.2(8/3), 4.6(43), 4.6(45), 4.6(51/3), 4.6(52), 4.7(4), 4.8(10/2), 6.5(5.11/3) Division_Check 3.5.4(20), 4.5.5(22), A.5.1(28), A.5.3(47), G.1.1(40), G.1.2(28), K.2(202) Elaboration_Check 3.11(9) Index_Check 4.1.1(7), 4.1.2(7), 4.3.3(29/3), 4.3.3(30), 4.5.3(8), 4.6(51/3), 4.7(4), 4.8(10/2) Length_Check 4.5.1(8), 4.6(37), 4.6(52) class-wide postcondition expression 6.1.1(5/3) class-wide precondition expression 6.1.1(3/3) class-wide type 3.4.1(4), 3.7(26) cleanup See finalization 7.6.1(1) clear execution timer object D.14.1(12/2) group budget object D.14.2(15/2) timing event object D.15(9/2) in Ada.Containers.Doubly_Linked_- Overflow_Check 3.5.4(20), 4.4(11), 4.5.7(21/3), 5.4(13), G.2.1(11), G.2.2(7), G.2.3(25), G.2.4(2), G.2.6(3) Lists A.18.3(13/2) in Ada.Containers.Hashed_Maps A.18.5(12/2) Partition_Check E.4(19) Range_Check 3.2.2(11), 3.5(24), in Ada.Containers.Hashed_Sets A.18.8(14/2) 3.5(27), 3.5(39.12/3), 3.5(39.4/3), 3.5(39.5/3), 3.5(43/3), 3.5(55/3), 3.5.5(7), 3.5.9(19), 4.2(11), 4.3.3(28), 4.5.1(8), 4.5.6(6), 4.5.6(13), 4.6(28), 4.6(38), 4.6(46), 4.6(51/3), 4.7(4), 13.13.2(35/3), A.5.2(39), A.5.3(26), A.5.3(29), A.5.3(50), A.5.3(53), A.5.3(59), A.5.3(62), K.2(11), K.2(114), K.2(122), K.2(184), K.2(220), K.2(241), K.2(41), K.2(47) Reserved_Check C.3.1(10/3) Storage_Check 11.1(6), 13.3(67), 13.11(17), D.7(17/1), D.7(18/1), D.7(19/1) Tag_Check 3.9.2(16), 4.6(42), 4.6(52), 5.2(10), 6.5(8.1/3) checking pragmas 11.5(1/2) child of a library unit 10.1.1(1) Child_Count in Ada.Containers.Multiway_Trees A.18.10(46/3) Child_Depth in Ada.Containers.Multiway_Trees A.18.10(47/3) choice parameter 11.2(9) choice_expression 4.4(2.1/3) used 3.8.1(5/3), 4.4(3.2/3), P choice_parameter_specification 11.2(4) used 11.2(3), P choice_relation 4.4(2.2/3) used 4.4(2.1/3), P Circumflex in Ada.Characters.Latin_1 A.3.3(12) class of types 3.2(2/2), 3.4(1.1/2) See also package 7(1) See also tag 3.9(3) class (of types) N(6/2) Class attribute 3.9(14), 7.3.1(9), J.11(2/2) class factory 3.9(30/2) in Ada.Containers.Indefinite_Holders A.18.18(11/3) in Ada.Containers.Multiway_Trees A.18.10(23/3) in Ada.Containers.Ordered_Maps A.18.6(11/2) in Ada.Containers.Ordered_Sets A.18.9(13/2) in Ada.Containers.Vectors A.18.2(24/2) in Ada.Environment_Variables A.17(7/2) cleared termination handler C.7.3(9/2) clock 9.6(6/3) in Ada.Calendar 9.6(12) in Ada.Execution_Time D.14(5/2) in Ada.Execution_Time.Interrupts D.14.3(3/3) in Ada.Real_Time D.8(6) clock jump D.8(32) clock tick D.8(23) Clock_For_Interrupts in Ada.Execution_Time D.14(9.3/3) Close in Ada.Direct_IO A.8.4(8) in Ada.Sequential_IO A.8.1(8) in Ada.Streams.Stream_IO A.12.1(10) in Ada.Text_IO A.10.1(11) close result set G.2.3(5) closed entry 9.5.3(5) of a protected object 9.5.3(7/3) of a task 9.5.3(6/3) closed under derivation 3.4(28), N(6/2) closure downward 3.10.2(37/2) COBOL child of Interfaces B.4(7) COBOL interface B.4(1/3) COBOL standard 1.2(4/2) COBOL_Character in Interfaces.COBOL B.4(13) COBOL_To_Ada in Interfaces.COBOL B.4(15) code point for characters 3.5.2(2/3) code_statement 13.8(2) used 5.1(4/2), P Coding aspect 13.4(7) coextension of an object 3.10.2(14.4/3) Col in Ada.Text_IO A.10.1(37) collection of an access type 7.6.1(11.1/3) colon 2.1(15/3) in Ada.Characters.Latin_1 A.3.3(10) column number A.10(9) comma 2.1(15/3) in Ada.Characters.Latin_1 A.3.3(8) Command_Line child of Ada A.15(3) Command_Name in Ada.Command_Line A.15(6) comment 2.7(2) comments, instructions for submission 0.2(58/1) Commercial_At in Ada.Characters.Latin_1 A.3.3(10) Communication_Error in System.RPC E.5(5) comparison operator See relational operator 4.5.2(1) compatibility composite_constraint with an access subtype 3.10(15/2) constraint with a subtype 3.2.2(12) delta_constraint with an ordinary fixed point subtype J.3(9) digits_constraint with a decimal fixed point subtype 3.5.9(18) digits_constraint with a floating point subtype J.3(10) discriminant constraint with a subtype 3.7.1(10) index constraint with a subtype 3.6.1(7) range with a scalar subtype 3.5(8) range_constraint with a scalar subtype 3.5(8) compatible a type, with a convention B.1(12) compilation 10.1.1(2) separate 10.1(1) Compilation unit 10.1(2), 10.1.1(9), N(7) compilation units needed by a compilation unit 10.2(2) remote call interface E.2.3(18) shared passive library unit E.2.1(11) compilation_unit 10.1.1(3) used 10.1.1(2), P compile-time error 1.1.2(27), 1.1.5(4) compile-time semantics 1.1.2(28) 875 13 December 2012 Index Ada Reference Manual — 2012 Edition complete context 8.6(4) completely defined 3.11.1(8) completion abnormal 7.6.1(2/2) compile-time concept 3.11.1(1/3) normal 7.6.1(2/2) run-time concept 7.6.1(2/2) completion and leaving (completed and left) 7.6.1(2/2) completion legality [partial] 3.10.1(13) entry_body 9.5.2(16) Complex in Ada.Numerics.Generic_Complex_- Types G.1.1(3) in Interfaces.Fortran B.5(9) Complex_Arrays child of Ada.Numerics G.3.2(53/2) Complex_Elementary_Functions child of Ada.Numerics G.1.2(9/1) Complex_IO child of Ada.Text_IO G.1.3(3) child of Ada.Wide_Text_IO G.1.4(1) child of Ada.Wide_Wide_Text_IO G.1.5(1/2) Complex_Matrix in Ada.Numerics.Generic_Complex_- Arrays G.3.2(4/2) Complex_Text_IO child of Ada G.1.3(9.1/2) Complex_Types child of Ada.Numerics G.1.1(25/1) Complex_Vector in Ada.Numerics.Generic_Complex_- Arrays G.3.2(4/2) component 3.2(2/2) of a type 3.2(6/2) component subtype 3.6(10) component_choice_list 4.3.1(5) used 4.3.1(4/2), P component_clause 13.5.1(3) used 13.5.1(2), P component_declaration 3.8(6/3) used 3.8(5/1), 9.4(6), P component_definition 3.6(7/2) used 3.6(3), 3.6(5), 3.8(6/3), P component_item 3.8(5/1) used 3.8(4), P component_list 3.8(4) used 3.8(3), 3.8.1(3), P Component_Size aspect 13.3(70) Component_Size attribute 13.3(69) Component_Size clause 13.3(7/2), 13.3(70) components of a record type 3.8(9/2) Compose in Ada.Directories A.16(20/2) in of an implementation with the Standard 1.1.3(1) See also full conformance, mode Ada.Directories.Hierarchical_File_Na mes A.16.1(14/3) conformance, subtype conformance, type conformance Compose attribute A.5.3(24) Compose_From_Cartesian in Ada.Numerics.Generic_Complex_- Arrays G.3.2(9/2), G.3.2(29/2) in Ada.Numerics.Generic_Complex_- Types G.1.1(8) Compose_From_Polar in Ada.Numerics.Generic_Complex_- Arrays G.3.2(11/2), G.3.2(32/2) in Ada.Numerics.Generic_Complex_- Types G.1.1(11) composite type 3.2(2/2), N(8/2) composite_constraint 3.2.2(7) used 3.2.2(5), P compound delimiter 2.2(10) compound_statement 5.1(5/2) used 5.1(3), P concatenation operator 4.4(1/3), 4.5.3(3) concrete subprogram See nonabstract subprogram 3.9.3(1/2) concrete type See nonabstract type 3.9.3(1/2) concurrent processing See task 9(1/3) condition 4.5.7(4/3) used 4.5.7(3/3), 5.3(2), 5.5(3/3), 5.7(2), Conjugate in Ada.Numerics.Generic_Complex_- Arrays G.3.2(13/2), G.3.2(34/2) in Ada.Numerics.Generic_Complex_- Types G.1.1(12), G.1.1(15) consistency among compilation units 10.1.4(5) constant 3.3(13/3) result of a function_call 6.4(12/2) See also literal 4.2(1) See also static 4.9(1) constant indexing 4.1.6(12/3) constant object 3.3(13/3) constant view 3.3(13/3) Constant_Indexing aspect 4.1.6(2/3) Constant_Reference in Ada.Containers.Doubly_Linked_- Lists A.18.3(17.3/3) in Ada.Containers.Hashed_Maps A.18.5(17.3/3), A.18.5(17.5/3) in Ada.Containers.Hashed_Sets A.18.8(17.2/3), A.18.8(58.3/3) in Ada.Containers.Indefinite_Holders in Ada.Containers.Multiway_Trees A.18.18(18/3) A.18.10(30/3) 9.5.2(7), 9.7.1(3), P See also exception 11(1/3) conditional_entry_call 9.7.3(2) used 9.7(2), P conditional_expression 4.5.7(2/3) used 4.4(7/3), P configuration of the partitions of a program E(4) configuration pragma 10.1.5(8) Assertion_Policy 11.4.2(7/3) Detect_Blocking H.5(4/2) Discard_Names C.5(4) Locking_Policy D.3(5) Normalize_Scalars H.1(4) Partition_Elaboration_Policy H.6(5/2) Priority_Specific_Dispatching D.2.2(5/2) Profile 13.12(14/3) Queuing_Policy D.4(5) Restrictions 13.12(8/3) Reviewable H.3.1(4) Suppress 11.5(5/2) Task_Dispatching_Policy D.2.2(5/2) Unsuppress 11.5(5/2) confirming aspect specification 13.1(18.2/3) representation item 13.1(18.2/3) representation value 13.1(18.2/3) conformance 6.3.1(1) in Ada.Containers.Ordered_Maps A.18.6(16.3/3), A.18.6(16.5/3) in Ada.Containers.Ordered_Sets A.18.9(16.2/3), A.18.9(73.3/3) in Ada.Containers.Vectors A.18.2(34.3/3), A.18.2(34.5/3) Constant_Reference_Type in Ada.Containers.Indefinite_Holders A.18.18(16/3) in Ada.Containers.Multiway_Trees A.18.10(28/3) Constants child of Ada.Strings.Maps A.4.6(3/2) constituent of a construct 1.1.4(17) constrained 3.2(9) known to be 3.3(23.1/3) object 3.3.1(9/2) object 6.4.1(16) subtype 3.2(9), 3.4(6), 3.5(7), 3.5.1(10), 3.5.4(9), 3.5.4(10), 3.5.7(11), 3.5.9(13), 3.5.9(16), 3.6(15), 3.6(16), 3.7(26), 3.9(15) subtype 3.10(14/3) subtype K.2(33) Constrained attribute 3.7.2(3/3), J.4(2) constrained by its initial value 3.3.1(9/2) [partial] 4.8(6/3), 6.5(5.11/3) constrained_array_definition 3.6(5) Index 13 December 2012 876 Ada Reference Manual — 2012 Edition used 3.6(2), P constraint 3.2.2(5) [partial] 3.2(7/2) of a first array subtype 3.6(16) of a subtype 3.2(8/2) of an object 3.3.1(9/2) used 3.2.2(3/2), P Constraint_Error raised by failure of run-time check Contains in Ada.Containers.Doubly_Linked_- Lists A.18.3(43/2) in Ada.Containers.Hashed_Maps A.18.5(32/2) in Ada.Containers.Hashed_Sets A.18.8(44/2), A.18.8(57/2) in Ada.Containers.Multiway_Trees A.18.10(41/3) 3.2.2(12), 3.5(24), 3.5(27), 3.5(39.12/3), 3.5(39.4/3), 3.5(39.5/3), 3.5(43/3), 3.5(55/3), 3.5.4(20), 3.5.5(7), 3.5.9(19), 3.9.2(16), 4.1(13), 4.1.1(7), 4.1.2(7), 4.1.3(15), 4.1.5(8/3), 4.2(11), 4.3(6), 4.3.2(8/3), 4.3.3(31), 4.4(11), 4.5(10), 4.5(11), 4.5(12), 4.5.1(8), 4.5.3(8), 4.5.5(22), 4.5.6(6), 4.5.6(12), 4.5.6(13), 4.5.7(21/3), 4.6(28), 4.6(57/3), 4.6(60), 4.7(4), 4.8(10.4/3), 4.8(10/2), 5.2(10), 5.4(13), 6.5(5.11/3), 6.5(8.1/3), 11.1(4), 11.4.1(14/2), 11.5(10), 13.9.1(9), 13.13.2(35/3), A.4.3(109), A.4.7(47), A.4.8(51/2), A.5.1(28), A.5.1(34), A.5.2(39), A.5.2(40.1/1), A.5.3(26), A.5.3(29), A.5.3(47), A.5.3(50), A.5.3(53), A.5.3(59), A.5.3(62), A.15(14), B.3(53), B.3(54), B.4(58), E.4(19), G.1.1(40), G.1.2(28), G.2.1(12), G.2.2(7), G.2.3(26), G.2.4(3), G.2.6(4), K.2(11), K.2(114), K.2(122), K.2(184), K.2(202), K.2(220), K.2(241), K.2(261), K.2(41), K.2(47) in Ada.Containers.Ordered_Maps A.18.6(42/2) in Ada.Containers.Ordered_Sets A.18.9(52/2), A.18.9(72/2) in Ada.Containers.Vectors A.18.2(71/2) context free grammar complete listing P cross reference P notation 1.1.4(3) under Syntax heading 1.1.2(25) context_clause 10.1.2(2) used 10.1.1(3), P context_item 10.1.2(3) used 10.1.2(2), P contiguous representation [partial] 13.5.2(5), 13.7.1(12), 13.9(9), 13.9(17/3), 13.11(21.6/3) Continue in Ada.Asynchronous_Task_Control D.11(3/2) control character a category of Character A.3.2(22) a category of Character A.3.3(4), A.3.3(15) in Standard A.1(46) Construct 1.1.4(16), N(9) constructor See initialization 3.3.1(18/2) See initialization 7.6(1) See initialization expression 3.3.1(4) See Initialize 7.6(1) See initialized allocator 4.8(4) container N(9.1/3) cursor A.18(2/2) list A.18.3(1/2) map A.18.4(1/2) set A.18.7(1/2) vector A.18.2(1/2) container element iterator 5.5.2(3/3) Containers child of Ada A.18.1(3/2) Containing_Directory in Ada.Directories A.16(17/2) in Ada.Directories.Hierarchical_File_Na mes A.16.1(11/3) See also format_effector 2.1(13/3) Control_Set in Ada.Strings.Maps.Constants A.4.6(4) Controlled in Ada.Finalization 7.6(5/2) controlled type 7.6(2), 7.6(9/2), N(10) controlling access result 3.9.2(2/3) controlling formal parameter 3.9.2(2/3) controlling operand 3.9.2(2/3) controlling result 3.9.2(2/3) controlling tag for a call on a dispatching operation 3.9.2(1/2) controlling tag value 3.9.2(14) for the expression in an assignment_statement 5.2(9) controlling type of a formal_abstract_subprogram_declarati on 12.6(8.4/3) convention 6.3.1(2/1), B.1(11/3) Convention aspect B.1(2/3) Convention pragma J.15.5(4/3), L(8.1/3) conversion 4.6(1/3), 4.6(28) access 4.6(24.11/2), 4.6(24.18/2), 4.6(24.19/2), 4.6(47) arbitrary order 1.1.4(18) array 4.6(24.2/2), 4.6(36) composite (non-array) 4.6(21/3), 4.6(40) enumeration 4.6(21.1/2), 4.6(34) numeric 4.6(24.1/2), 4.6(29) unchecked 13.9(1) value 4.6(5/2) view 4.6(5/2) Conversion_Error in Interfaces.COBOL B.4(30) Conversions child of Ada.Characters A.3.4(2/2) child of Ada.Strings.UTF_Encoding A.4.11(15/3) Convert in Ada.Strings.UTF_Encoding.Conversio ns A.4.11(16/3), A.4.11(17/3), A.4.11(18/3), A.4.11(19/3), A.4.11(20/3) convertible 4.6(4/3) required 4.6(24.13/2), 4.6(24.4/2), 8.6(27.1/3) Copy in Ada.Containers.Doubly_Linked_- Lists A.18.3(17.6/3) in Ada.Containers.Hashed_Maps A.18.5(17.8/3) in Ada.Containers.Hashed_Sets A.18.8(17.4/3) in Ada.Containers.Indefinite_Holders A.18.18(21/3), A.18.20(10/3), A.18.21(13/3), A.18.22(10/3), A.18.23(13/3), A.18.24(10/3) in Ada.Containers.Multiway_Trees A.18.10(33/3) in Ada.Containers.Ordered_Maps A.18.6(16.8/3) in Ada.Containers.Ordered_Sets A.18.9(16.4/3) in Ada.Containers.Vectors A.18.2(34.8/3) copy back of parameters 6.4.1(17) copy parameter passing 6.2(2) Copy_Array in Interfaces.C.Pointers B.3.2(15) Copy_File in Ada.Directories A.16(13/2) Copy_Sign attribute A.5.3(51) Copy_Subtree in Ada.Containers.Multiway_Trees A.18.10(54/3) Copy_Terminated_Array in Interfaces.C.Pointers B.3.2(14) Copyright_Sign in Ada.Characters.Latin_1 A.3.3(21/3) core language 1.1.2(2) 877 13 December 2012 Index Ada Reference Manual — 2012 Edition corresponding constraint 3.4(6) corresponding discriminants 3.7(18) corresponding index for an array_aggregate 4.3.3(8) corresponding subtype 3.4(18/3) corresponding value of the target type of a conversion 4.6(28) Cos in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(4) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(5) Cosh in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(6) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(7) Cot in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(4) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(5) Coth in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(6) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(7) Count in Ada.Direct_IO A.8.4(4) in Ada.Streams.Stream_IO A.12.1(7) in Ada.Strings.Bounded A.4.4(48), A.4.4(49), A.4.4(50) in Ada.Strings.Fixed A.4.3(13), A.4.3(14), A.4.3(15) in Ada.Strings.Unbounded A.4.5(43), A.4.5(44), A.4.5(45) in Ada.Text_IO A.10.1(5) Count attribute 9.9(5) Count_Type in Ada.Containers A.18.1(5/2) Country in Ada.Locales A.19(6/3) Country code standard 1.2(4.1/3) Country_Code in Ada.Locales A.19(4/3) Country_Unknown in Ada.Locales A.19(5/3) cover a type 3.4.1(9) of a choice and an exception 11.2(6) cover a value by a discrete_choice 3.8.1(9) by a discrete_choice_list 3.8.1(13) CPU aspect D.16(8/3) CPU clock tick D.14(15/2) CPU pragma J.15.9(2/3), L(8.2/3) CPU subtype of CPU_Range in System.Multiprocessors D.16(4/3) CPU time of a task D.14(11/3) CPU_Range in System.Multiprocessors D.16(4/3) CPU_Tick in Ada.Execution_Time D.14(4/2) CPU_Time in Ada.Execution_Time D.14(4/2) CPU_Time_First in Ada.Execution_Time D.14(4/2) CPU_Time_Last in Ada.Execution_Time D.14(4/2) CPU_Time_Unit in Ada.Execution_Time D.14(4/2) CR in Ada.Characters.Latin_1 A.3.3(5) create 3.1(12) in Ada.Direct_IO A.8.4(6) in Ada.Sequential_IO A.8.1(6) in Ada.Streams.Stream_IO A.12.1(8) in Ada.Text_IO A.10.1(9) in System.Multiprocessors.Dispatching_ Domains D.16.1(7/3) Create_Directory in Ada.Directories A.16(7/2) Create_Path in Ada.Directories A.16(9/2) Create_Subpool in System.Storage_Pools.Subpools 13.11.4(7/3) creation of a protected object C.3.1(10/3) of a return object 6.5(5.11/3) of a tag 13.14(20/2) of a task object D.1(17/3) of an object 3.3(1) critical section See intertask communication 9.5(1) CSI in Ada.Characters.Latin_1 A.3.3(19) Currency_Sign in Ada.Characters.Latin_1 A.3.3(21/3) current column number A.10(9) current index of an open direct file A.8(4) of an open stream file A.12.1(1.1/1) current instance of a generic unit 8.6(18) of a type 8.6(17/3) current line number A.10(9) current mode of an open file A.7(7) current page number A.10(9) Current size of a stream file A.12.1(1.1/1) of an external file A.8(3) Current_Directory in Ada.Directories A.16(5/2) Current_Error in Ada.Text_IO A.10.1(17), A.10.1(20) Current_Handler in Ada.Execution_Time.Group_Budgets D.14.2(10/2) in Ada.Execution_Time.Timers D.14.1(7/2) in Ada.Interrupts C.3.2(6) in Ada.Real_Time.Timing_Events D.15(5/2) Current_Input in Ada.Text_IO A.10.1(17), A.10.1(20) Current_Output in Ada.Text_IO A.10.1(17), A.10.1(20) Current_State in Ada.Synchronous_Task_Control D.10(4) Current_Task in Ada.Task_Identification C.7.1(3/3) Current_Task_Fallback_Handler in Ada.Task_Termination C.7.3(5/2) Current_Use in Ada.Containers.Bounded_Priority_Qu eues A.18.31(7/3) in Ada.Containers.Bounded_Synchronize d_Queues A.18.29(6/3) in Ada.Containers.Synchronized_Queue_ Interfaces A.18.27(7/3) in Ada.Containers.Unbounded_Priority_ Queues A.18.30(7/3) in Ada.Containers.Unbounded_Synchron ized_Queues A.18.28(6/3) cursor ambiguous A.18.2(240/2) for a container A.18(2/2) invalid A.18.2(248/2), A.18.3(153/2), A.18.4(76/2), A.18.7(97/2), A.18.10(222/3) in Ada.Containers.Doubly_Linked_- Lists A.18.3(7/2) in Ada.Containers.Hashed_Maps A.18.5(4/2) in Ada.Containers.Hashed_Sets A.18.8(4/2) in Ada.Containers.Multiway_Trees A.18.10(9/3) in Ada.Containers.Ordered_Maps A.18.6(5/2) in Ada.Containers.Ordered_Sets A.18.9(5/2) in Ada.Containers.Vectors A.18.2(9/2) D Index 13 December 2012 878 Ada Reference Manual — 2012 Edition dangling references prevention via accessibility rules 3.10.2(3/2) Data_Error in Ada.Direct_IO A.8.4(18) in Ada.IO_Exceptions A.13(4) in Ada.Sequential_IO A.8.1(15) in Ada.Storage_IO A.9(9) in Ada.Streams.Stream_IO A.12.1(26) in Ada.Text_IO A.10.1(85) date and time formatting standard 1.2(5.1/2) Day in Ada.Calendar 9.6(13) in Ada.Calendar.Formatting 9.6.1(23/2) Day_Count in Ada.Calendar.Arithmetic 9.6.1(10/2) Day_Duration subtype of Duration in Ada.Calendar 9.6(11/2) Day_Name in Ada.Calendar.Formatting 9.6.1(17/2) Day_Number subtype of Integer in Ada.Calendar 9.6(11/2) Day_of_Week in Ada.Calendar.Formatting 9.6.1(18/2) in DC1 in Ada.Characters.Latin_1 A.3.3(6) DC2 in Ada.Characters.Latin_1 A.3.3(6) DC3 in Ada.Characters.Latin_1 A.3.3(6) DC4 in Ada.Characters.Latin_1 A.3.3(6) DCS in Ada.Characters.Latin_1 A.3.3(18) Deadline subtype of Time in Ada.Dispatching.EDF D.2.6(9/2) Deallocate in System.Storage_Pools 13.11(8) in System.Storage_Pools.Subpools 13.11.4(15/3) Deallocate_Subpool in System.Storage_Pools.Subpools 13.11.4(12/3) deallocation of storage 13.11.2(1) Decimal child of Ada F.2(2) decimal digit a category of Character A.3.2(28) decimal fixed point type 3.5.9(1), 3.5.9(6) Decimal_Conversions in Interfaces.COBOL B.4(31) Decimal_Digit_Set in Ada.Strings.Maps.Constants A.4.6(4) Decimal_Element in Interfaces.COBOL B.4(12/3) decimal_fixed_point_definition 3.5.9(4) used 3.5.9(2), P Decimal_IO in Ada.Text_IO A.10.1(73) decimal_literal 2.4.1(2) used 2.4(2), P Decimal_Output in Ada.Text_IO.Editing F.3.3(11) Declaration 3.1(5), 3.1(6/3), N(11) declaration list declarative_part 3.11(6.1/2) package_specification 7.1(6/2) declarative region of a construct 8.1(1) declarative_item 3.11(3) used 3.11(2), P declarative_part 3.11(2) used 5.6(2), 6.3(2/3), 7.2(2/3), 9.1(6/3), 9.5.2(5), P declare 3.1(8), 3.1(12) declared pure 10.2.1(17/3) Decode in Ada.Strings.UTF_Encoding.Strings A.4.11(26/3), A.4.11(27/3), A.4.11(28/3) Ada.Strings.UTF_Encoding.Wide_Stri ngs A.4.11(34/3), A.4.11(35/3), A.4.11(36/3) in Ada.Strings.UTF_Encoding.Wide_Wi de_Strings A.4.11(42/3), A.4.11(43/3), A.4.11(44/3) Decrement in Interfaces.C.Pointers B.3.2(11/3) deeper accessibility level 3.10.2(3/2) statically 3.10.2(4), 3.10.2(17) default constant indexing function 5.5.1(16/3) default cursor subtype 5.5.1(8/3) default directory A.16(48/2) default element subtype 5.5.1(9/3) default entry queuing policy 9.5.3(17) default iterator function 5.5.1(8/3) default iterator subtype 5.5.1(8/3) default pool 13.11.3(4.1/3) default treatment C.3(5) default variable indexing function 5.5.1(21/3) Default_Aft in Ada.Text_IO A.10.1(64), A.10.1(69), A.10.1(74) in Ada.Text_IO.Complex_IO G.1.3(5) Default_Base in Ada.Text_IO A.10.1(53), A.10.1(58) Default_Bit_Order in System 13.7(15/2) Default_Component_Value aspect 3.6(22.2/3) Default_Currency in Ada.Text_IO.Editing F.3.3(10) Default_Deadline in Ada.Dispatching.EDF D.2.6(9/2) Default_Exp in Ada.Text_IO A.10.1(64), A.10.1(69), A.10.1(74) in Ada.Text_IO.Complex_IO G.1.3(5) default_expression 3.7(6) used 3.7(5/2), 3.8(6/3), 6.1(15/3), 12.4(2/3), P Default_Fill in Ada.Text_IO.Editing F.3.3(10) Default_Fore in Ada.Text_IO A.10.1(64), A.10.1(69), A.10.1(74) in Ada.Text_IO.Complex_IO G.1.3(5) Default_Iterator aspect 5.5.1(8/3) Default_Modulus in Ada.Containers.Indefinite_Holders A.18.21(10/3), A.18.23(10/3) default_name 12.6(4) used 12.6(3/2), P Default_Priority in System 13.7(17) Default_Quantum in Ada.Dispatching.Round_Robin D.2.5(4/2) Default_Radix_Mark in Ada.Text_IO.Editing F.3.3(10) Default_Separator in Ada.Text_IO.Editing F.3.3(10) Default_Setting in Ada.Text_IO A.10.1(80) Default_Storage_Pool aspect 13.11.3(5/3) Default_Storage_Pool pragma 13.11.3(3/3), L(8.3/3) Default_Subpool_for_Pool in System.Storage_Pools.Subpools 13.11.4(13/3) Default_Value aspect 3.5(56.3/3) Default_Width in Ada.Text_IO A.10.1(53), A.10.1(58), A.10.1(80) deferred constant 7.4(2/3) deferred constant declaration 3.3.1(6/3), 7.4(2/3) defining name 3.1(10) defining_character_literal 3.5.1(4) used 3.5.1(3), P defining_designator 6.1(6) used 6.1(4.2/2), 12.3(2/3), P defining_identifier 3.1(4) 879 13 December 2012 Index Ada Reference Manual — 2012 Edition used 3.2.1(3/3), 3.2.2(2/3), 3.3.1(3), in Ada.Strings.Fixed A.4.3(29), 3.5.1(3), 3.10.1(2/2), 5.5(4), 5.5.2(2/3), 6.1(7), 6.5(2.1/3), 7.3(2/3), 7.3(3/3), 8.5.1(2/3), 8.5.2(2/3), 9.1(2/3), 9.1(3/3), 9.1(6/3), 9.4(2/3), 9.4(3/3), 9.4(7/3), 9.5.2(2/3), 9.5.2(5), 9.5.2(8), 10.1.3(4), 10.1.3(5), 10.1.3(6), 11.2(4), 12.5(2.1/3), 12.5(2.2/3), 12.7(2/3), P defining_identifier_list 3.3.1(3) used 3.3.1(2/3), 3.3.2(2), 3.7(5/2), 3.8(6/3), 6.1(15/3), 11.1(2/3), 12.4(2/3), P defining_operator_symbol 6.1(11) used 6.1(6), P defining_program_unit_name 6.1(7) used 6.1(4.1/2), 6.1(6), 7.1(3/3), 7.2(2/3), 8.5.3(2/3), 8.5.5(2/3), 12.3(2/3), P Definite attribute 12.5.1(23/3) definite subtype 3.3(23/3) definition 3.1(7) Degree_Sign in Ada.Characters.Latin_1 A.3.3(22) DEL in Ada.Characters.Latin_1 A.3.3(14) delay_alternative 9.7.1(6) used 9.7.1(4), 9.7.2(2), P delay_relative_statement 9.6(4) used 9.6(2), P delay_statement 9.6(2) used 5.1(4/2), 9.7.1(6), 9.7.4(4/2), P Delay_Until_And_Set_CPU in System.Multiprocessors.Dispatching_ Domains D.16.1(14/3) Delay_Until_And_Set_Deadline in Ada.Dispatching.EDF D.2.6(9/2) delay_until_statement 9.6(3) used 9.6(2), P Delete in Ada.Containers.Doubly_Linked_- Lists A.18.3(24/2) in Ada.Containers.Hashed_Maps A.18.5(25/2), A.18.5(26/2) in Ada.Containers.Hashed_Sets A.18.8(24/2), A.18.8(25/2), A.18.8(55/2) in Ada.Containers.Ordered_Maps A.18.6(24/2), A.18.6(25/2) in Ada.Containers.Ordered_Sets A.18.9(23/2), A.18.9(24/2), A.18.9(68/2) in Ada.Containers.Vectors A.18.2(50/2), A.18.2(51/2) in Ada.Direct_IO A.8.4(8) in Ada.Sequential_IO A.8.1(8) in Ada.Streams.Stream_IO A.12.1(10) in Ada.Strings.Bounded A.4.4(64), A.4.4(65) A.4.3(30) in Ada.Strings.Unbounded A.4.5(59), A.4.5(60) in Ada.Text_IO A.10.1(11) Delete_Children in Ada.Containers.Multiway_Trees A.18.10(53/3) Delete_Directory in Ada.Directories A.16(8/2) Delete_File in Ada.Directories A.16(11/2) Delete_First in Ada.Containers.Doubly_Linked_- Lists A.18.3(25/2) in Ada.Containers.Ordered_Maps semantic 10.1.1(26/2) depth accessibility level 3.10.2(3/2) in Ada.Containers.Multiway_Trees A.18.10(19/3) depth-first order A.18.10(5/3) Dequeue in Ada.Containers.Bounded_Priority_Qu eues A.18.31(5/3) in Ada.Containers.Bounded_Synchronize d_Queues A.18.29(5/3) in Ada.Containers.Synchronized_Queue_ Interfaces A.18.27(6/3) A.18.6(26/2) in in Ada.Containers.Ordered_Sets A.18.9(25/2) Ada.Containers.Unbounded_Priority_ Queues A.18.30(5/3) in Ada.Containers.Vectors in A.18.2(52/2) Delete_Last in Ada.Containers.Doubly_Linked_- Lists A.18.3(26/2) in Ada.Containers.Ordered_Maps A.18.6(27/2) Ada.Containers.Unbounded_Synchron ized_Queues A.18.28(5/3) Dequeue_Only_High_Priority in Ada.Containers.Bounded_Priority_Qu eues A.18.31(6/3) in Ada.Containers.Ordered_Sets in A.18.9(26/2) in Ada.Containers.Vectors A.18.2(53/2) Delete_Leaf in Ada.Containers.Multiway_Trees A.18.10(35/3) Delete_Subtree in Ada.Containers.Multiway_Trees A.18.10(36/3) Delete_Tree in Ada.Directories A.16(10/2) delimiter 2.2(8/2) delivery of an interrupt C.3(2) delta of a fixed point type 3.5.9(1) Delta attribute 3.5.10(3) delta_constraint J.3(2) used 3.2.2(6), P Denorm attribute A.5.3(9) denormalized number A.5.3(10) denote 8.6(16) informal definition 3.1(8) name used as a pragma argument 8.6(32) depend on a discriminant for a component 3.7(20) for a constraint or component_definition 3.7(19) dependence elaboration 10.2(9) of a task on a master 9.3(1) of a task on another task 9.3(4) Ada.Containers.Unbounded_Priority_ Queues A.18.30(6/3) dereference 4.1(8) Dereference_Error in Interfaces.C.Strings B.3.1(12) derivation class for a type 3.4.1(2/2) derived from directly or indirectly 3.4.1(2/2) derived type 3.4(1/2), N(13/2) [partial] 3.4(24) derived_type_definition 3.4(2/2) used 3.2.1(4/2), P descendant 10.1.1(11), N(13.1/2) at run-time 3.9(12.3/3) of a tree node A.18.10(4/3) of a type 3.4.1(10/2) of an incomplete view 7.3.1(5.2/3) of the full view of a type 7.3.1(5.1/3) relationship with scope 8.2(4) Descendant_Tag in Ada.Tags 3.9(7.1/2) designate 3.10(1) designated profile of an access-to-subprogram type 3.10(11) of an anonymous access type 3.10(12/3) designated subtype of a named access type 3.10(10) of an anonymous access type 3.10(12/3) Index 13 December 2012 880 Ada Reference Manual — 2012 Edition designated type of a named access type 3.10(10) of an anonymous access type 3.10(12/3) designator 6.1(5) used 6.3(2/3), P destructor See finalization 7.6(1) See finalization 7.6.1(1) Detach_Handler in Ada.Interrupts C.3.2(9) Detect_Blocking pragma H.5(3/2), L(8.4/2) Determinant in Ada.Numerics.Generic_Complex_- directly specified of a representation aspect of an entity 13.1(8/3) of an operational aspect of an entity 13.1(8.1/3) directly visible 8.3(2), 8.3(21) within a pragma in a context_clause 10.1.6(3) within a pragma that appears at the place of a compilation unit 10.1.6(5) within a use_clause in a context_clause 10.1.6(3) within a with_clause 10.1.6(2/2) within the parent_unit_name of a library unit 10.1.6(2/2) Arrays G.3.2(46/2) within the parent_unit_name of a in Ada.Numerics.Generic_Real_Arrays subunit 10.1.6(4) G.3.1(24/2) determined category for a formal type 12.5(6/3) determines a type by a subtype_mark 3.2.2(8) Device_Error in Ada.Direct_IO A.8.4(18) in Ada.Directories A.16(43/2) in Ada.IO_Exceptions A.13(4) in Ada.Sequential_IO A.8.1(15) in Ada.Streams.Stream_IO A.12.1(26) in Ada.Text_IO A.10.1(85) Diaeresis in Ada.Characters.Latin_1 A.3.3(21/3) Difference in Ada.Calendar.Arithmetic 9.6.1(12/2) in Ada.Containers.Hashed_Sets A.18.8(32/2), A.18.8(33/2) in Ada.Containers.Ordered_Sets A.18.9(33/2), A.18.9(34/2) digit 2.4.1(4.1/2) used 2.4.1(3), 2.4.2(5), P digits of a decimal fixed point subtype 3.5.9(6), 3.5.10(7) Digits attribute 3.5.8(2/1), 3.5.10(7) digits_constraint 3.5.9(5) used 3.2.2(6), P dimensionality of an array 3.6(12) direct access A.8(3) direct file A.8(1/2) Direct_IO child of Ada A.8.4(2) direct_name 4.1(3) used 3.8.1(2), 4.1(2/3), 5.1(8), 9.5.2(3), 10.2.1(4.2/2), 13.1(3), J.7(1), L(25.2/2), P Direction in Ada.Strings A.4.1(6) Directories child of Ada A.16(3/2) directory A.16(45/2) directory entry A.16(49/2) directory name A.16(46/2) Directory_Entry_Type in Ada.Directories A.16(29/2) disabled predicate checks 3.2.4(7/3) Discard_Names pragma C.5(3), L(9) discontiguous representation [partial] 13.5.2(5), 13.7.1(12), 13.9(9), 13.9(17/3), 13.11(21.6/3) discrete array type 4.5.2(1) discrete type 3.2(3), 3.5(1), N(14) discrete_choice 3.8.1(5/3) used 3.8.1(4), P discrete_choice_list 3.8.1(4) used 3.8.1(3), 4.3.3(5/2), 4.5.7(6/3), 5.4(3), P Discrete_Random child of Ada.Numerics A.5.2(17) discrete_range 3.6.1(3) used 3.6.1(2), 4.1.2(2), P discrete_subtype_definition 3.6(6) used 3.6(5), 5.5(4), 9.5.2(2/3), 9.5.2(8), P discriminant 3.2(5/2), 3.7(1/2), N(15/2) of a variant_part 3.8.1(6) use in a record definition 3.8(12/3) discriminant_association 3.7.1(3) used 3.7.1(2), P Discriminant_Check 11.5(12) [partial] 4.1.3(15), 4.3(6), 4.3.2(8/3), 4.6(43), 4.6(45), 4.6(51/3), 4.6(52), 4.7(4), 4.8(10/2), 6.5(5.11/3) discriminant_constraint 3.7.1(2) used 3.2.2(7), P discriminant_part 3.7(2/2) used 3.10.1(2/2), 7.3(2/3), 7.3(3/3), 12.5(2.1/3), 12.5(2.2/3), P discriminant_specification 3.7(5/2) used 3.7(4), P discriminants known 3.7(26) unknown 3.7(26) discriminated type 3.7(8/2) dispatching 3.9(3) child of Ada D.2.1(1.2/3) dispatching call on a dispatching operation 3.9.2(1/2) dispatching operation 3.9.2(1/2), 3.9.2(2/3) [partial] 3.9(1) dispatching point D.2.1(4/2) [partial] D.2.3(8/2), D.2.4(9/3) dispatching policy for tasks [partial] D.2.1(5/2) dispatching, task D.2.1(4/2) Dispatching_Domain in System.Multiprocessors.Dispatching_ Domains D.16.1(5/3) Dispatching_Domain aspect D.16.1(18/3) Dispatching_Domain pragma J.15.10(2/3), L(9.1/3) Dispatching_Domain_Error in System.Multiprocessors.Dispatching_ Domains D.16.1(4/3) Dispatching_Domains child of System.Multiprocessors D.16.1(3/3) Dispatching_Policy_Error in Ada.Dispatching D.2.1(1.4/3) Display_Format in Interfaces.COBOL B.4(22) displayed magnitude (of a decimal value) disruption of an assignment 9.8(21), F.3.2(14) 13.9.1(5) [partial] 11.6(6/3) distinct access paths 6.2(12/3) distributed accessibility 3.10.2(32.1/3) distributed program E(3) distributed system E(2) distributed systems C(1) divide 2.1(15/3) in Ada.Decimal F.2(6/3) divide operator 4.4(1/3), 4.5.5(1) Division_Check 11.5(13/2) [partial] 3.5.4(20), 4.5.5(22), A.5.1(28), A.5.3(47), G.1.1(40), G.1.2(28), K.2(202) Division_Sign in Ada.Characters.Latin_1 A.3.3(26) DLE in Ada.Characters.Latin_1 A.3.3(6) Do_APC in System.RPC E.5(10) Do_RPC in System.RPC E.5(9) 881 13 December 2012 Index Ada Reference Manual — 2012 Edition documentation (required of an implementation) 1.1.3(18), M.1(1/2), M.2(1/2), M.3(1/2) documentation requirements 1.1.2(34), Eigenvalues in Ada.Numerics.Generic_Complex_- Arrays G.3.2(48/2) in Ada.Numerics.Generic_Real_Arrays M(1/3) G.3.1(26/2) summary of requirements M.1(1/2) Dollar_Sign in Ada.Characters.Latin_1 A.3.3(8) dot 2.1(15/3) dot selection See selected_component 4.1.3(1) double in Interfaces.C B.3(16) Double_Precision in Interfaces.Fortran B.5(6) Doubly_Linked_Lists child of Ada.Containers A.18.3(5/3) downward closure 3.10.2(37/2) drift rate D.8(41) Duration in Standard A.1(43) dynamic binding See dispatching operation 3.9(1) dynamic semantics 1.1.2(30) Dynamic_Predicate aspect 3.2.4(1/3) Dynamic_Priorities child of Ada D.5.1(3/2) dynamically determined tag 3.9.2(1/2) dynamically enclosing of one execution by another 11.4(2) dynamically tagged 3.9.2(5/2) E e in Ada.Numerics A.5(3/2) EDF child of Ada.Dispatching D.2.6(9/2) child of Ada.Synchronous_Task_Control D.10(5.2/3) EDF_Across_Priorities task dispatching policy D.2.6(7/2) edited output F.3(1/2) Editing child of Ada.Text_IO F.3.3(3) child of Ada.Wide_Text_IO F.3.4(1) child of Ada.Wide_Wide_Text_IO F.3.5(1/2) effect external 1.1.3(8) efficiency 11.5(29), 11.6(1/3) Eigensystem in Ada.Numerics.Generic_Complex_- Arrays G.3.2(49/2) in Ada.Numerics.Generic_Real_Arrays G.3.1(27/2) per-object constraint 3.8(18.1/1) pragma 2.8(12) private_extension_declaration 7.3(17) private_type_declaration 7.3(17) protected declaration 9.4(12) protected_body 9.4(15) protected_definition 9.4(13) range_constraint 3.5(9) real_type_definition 3.5.6(5) record_definition 3.8(16) record_extension_part 3.9.1(5) record_type_definition 3.8(16) renaming_declaration 8.5(3) single_protected_declaration 9.4(12) single_task_declaration 9.1(10) subprogram_declaration 6.1(31/2) subtype_declaration 3.2.2(9) subtype_indication 3.2.2(9) task declaration 9.1(10) task_body 9.1(13) task_definition 9.1(11) use_clause 8.4(12) variant_part 3.8.1(22) elaboration control 10.2.1(1) elaboration dependence library_item on another 10.2(9) Elaboration_Check 11.5(20) [partial] 3.11(9) element of a storage pool 13.11(11) in Ada.Containers.Doubly_Linked_- Lists A.18.3(14/2) in Ada.Containers.Hashed_Maps A.18.5(14/2), A.18.5(31/2) in Ada.Containers.Hashed_Sets A.18.8(15/2), A.18.8(52/2) Elaborate pragma 10.2.1(20), L(10) Elaborate_All pragma 10.2.1(21), L(11) Elaborate_Body aspect 10.2.1(26.1/3) Elaborate_Body pragma 10.2.1(22), L(12) elaborated 3.11(8) elaboration 3.1(11), N(15.1/2), N(19) abstract_subprogram_declaration 3.9.3(11.1/2) access_definition 3.10(17/2) access_type_definition 3.10(16) array_type_definition 3.6(21) aspect_clause 13.1(19/1) choice_parameter_specification 11.4(7) component_declaration 3.8(17) component_definition 3.6(22/2), 3.8(18/2) component_list 3.8(17) declaration with a True Import aspect B.1(38/3) declarative_part 3.11(7) deferred constant declaration 7.4(10/3) delta_constraint J.3(11) derived_type_definition 3.4(26) digits_constraint 3.5.9(19) discrete_subtype_definition 3.6(22/2) discriminant_constraint 3.7.1(12) entry_declaration 9.5.2(22/1) enumeration_type_definition 3.5.1(10) exception_declaration 11.1(5) expression_function_declaration 6.8(8/3) in Ada.Containers.Indefinite_Holders fixed_point_definition 3.5.9(17) floating_point_definition 3.5.7(13) full type definition 3.2.1(11) full_type_declaration 3.2.1(11) generic body 12.2(2) generic_declaration 12.1(10) generic_instantiation 12.3(20) incomplete_type_declaration 3.10.1(12) index_constraint 3.6.1(8) integer_type_definition 3.5.4(18) loop_parameter_specification 5.5(9/3) nongeneric package_body 7.2(6) nongeneric subprogram_body 6.3(6) null_procedure_declaration 6.7(5/3) number_declaration 3.3.2(7) object_declaration 3.3.1(15) of library units for a foreign language main subprogram B.1(39/3) package_body of Standard A.1(50) package_declaration 7.1(8) partition E.1(6) partition E.5(21) A.18.18(12/3) in Ada.Containers.Multiway_Trees A.18.10(24/3) in Ada.Containers.Ordered_Maps A.18.6(13/2), A.18.6(39/2) in Ada.Containers.Ordered_Sets A.18.9(14/2), A.18.9(65/2) in Ada.Containers.Vectors A.18.2(27/2), A.18.2(28/2) in Ada.Strings.Bounded A.4.4(26) in Ada.Strings.Unbounded A.4.5(20) elementary type 3.2(2/2), N(16) Elementary_Functions child of Ada.Numerics A.5.1(9/1) eligible a type, for a convention B.1(14/3) else part of a selective_accept 9.7.1(11) EM in Ada.Characters.Latin_1 A.3.3(6) embedded systems C(1), D(1) empty element of a vector A.18.2(4/2) Index 13 December 2012 882 Ada Reference Manual — 2012 Edition empty holder A.18.18(3/3) Empty_Holder in Ada.Containers.Indefinite_Holders A.18.18(7/3) Empty_List in Ada.Containers.Doubly_Linked_- Lists A.18.3(8/2) Empty_Map in Ada.Containers.Hashed_Maps A.18.5(5/2) in Ada.Containers.Ordered_Maps A.18.6(6/2) Empty_Set in Ada.Containers.Hashed_Sets A.18.8(5/2) in Ada.Containers.Ordered_Sets A.18.9(6/2) Empty_Tree in Ada.Containers.Multiway_Trees A.18.10(10/3) Empty_Vector in Ada.Containers.Vectors A.18.2(10/2) enabled invariant expression 7.3.2(21/3) postcondition expression 6.1.1(19/3) precondition expression 6.1.1(19/3) predicate checks 3.2.4(7/3) encapsulation See package 7(1) enclosing immediately 8.1(13) Encode in Ada.Strings.UTF_Encoding.Strings A.4.11(23/3), A.4.11(24/3), A.4.11(25/3) in Ada.Strings.UTF_Encoding.Wide_Stri ngs A.4.11(31/3), A.4.11(32/3), A.4.11(33/3) in Ada.Strings.UTF_Encoding.Wide_Wi de_Strings A.4.11(39/3), A.4.11(40/3), A.4.11(41/3) Encoding in Ada.Strings.UTF_Encoding A.4.11(13/3) encoding scheme A.4.11(46/3) Encoding_Error in Ada.Strings.UTF_Encoding A.4.11(8/3) Encoding_Scheme in Ada.Strings.UTF_Encoding A.4.11(4/3) end of a line 2.2(2/3) End_Error raised by failure of run-time check 13.13.2(37/1) in Ada.Direct_IO A.8.4(18) in Ada.IO_Exceptions A.13(4) in Ada.Sequential_IO A.8.1(15) in Ada.Streams.Stream_IO A.12.1(26) in Ada.Text_IO A.10.1(85) End_Of_File in Ada.Direct_IO A.8.4(16) in Ada.Sequential_IO A.8.1(13) in Ada.Streams.Stream_IO A.12.1(12) in Ada.Text_IO A.10.1(34) End_Of_Line in Ada.Text_IO A.10.1(30) End_Of_Page in Ada.Text_IO A.10.1(33) End_Search in Ada.Directories A.16(33/2) endian big 13.5.3(2) little 13.5.3(2) ENQ in Ada.Characters.Latin_1 A.3.3(5) Enqueue in Ada.Containers.Bounded_Priority_Qu eues A.18.31(5/3) in Ada.Containers.Bounded_Synchronize d_Queues A.18.29(5/3) in Ada.Containers.Synchronized_Queue_ Interfaces A.18.27(5/3) in Ada.Containers.Unbounded_Priority_ Queues A.18.30(5/3) in Ada.Containers.Unbounded_Synchron ized_Queues A.18.28(5/3) entity [partial] 3.1(1) entry closed 9.5.3(5) open 9.5.3(5) single 9.5.2(20) entry call 9.5.3(1) simple 9.5.3(1) entry calling convention 6.3.1(13) entry family 9.5.2(20) entry index subtype 3.8(18/2), 9.5.2(20) entry queue 9.5.3(12) entry queuing policy 9.5.3(17) default policy 9.5.3(17) entry_barrier 9.5.2(7) used 9.5.2(5), P entry_body 9.5.2(5) used 9.4(8/1), P entry_body_formal_part 9.5.2(6) used 9.5.2(5), P entry_call_alternative 9.7.2(3/2) used 9.7.2(2), 9.7.3(2), P entry_call_statement 9.5.3(2) used 5.1(4/2), 9.7.2(3.1/2), P entry_declaration 9.5.2(2/3) used 9.1(5/1), 9.4(5/1), P entry_index 9.5.2(4) used 9.5.2(3), P entry_index_specification 9.5.2(8) used 9.5.2(6), P enumeration literal 3.5.1(6/3) enumeration type 3.2(3), 3.5.1(1), N(17) enumeration_aggregate 13.4(3) used 13.4(2), P Enumeration_IO in Ada.Text_IO A.10.1(79) enumeration_literal_specification 3.5.1(3) used 3.5.1(2), P enumeration_representation_clause 13.4(2) used 13.1(2/1), P enumeration_type_definition 3.5.1(2) used 3.2.1(4/2), P environment 10.1.4(1) environment declarative_part 10.1.4(1) for the environment task of a partition 10.2(13) environment task 10.2(8) environment variable A.17(1/2) Environment_Task in Ada.Task_Identification C.7.1(3/3) Environment_Variables child of Ada A.17(3/2) EOT in Ada.Characters.Latin_1 A.3.3(5) EPA in Ada.Characters.Latin_1 A.3.3(18) epoch D.8(19) equal operator 4.4(1/3), 4.5.2(1) Equal_Case_Insensitive child of Ada.Strings A.4.10(2/3) child of Ada.Strings.Bounded A.4.10(7/3) child of Ada.Strings.Fixed A.4.10(5/3) child of Ada.Strings.Unbounded A.4.10(10/3) Equal_Subtree in Ada.Containers.Multiway_Trees A.18.10(14/3) equality operator 4.5.2(1) special inheritance rule for tagged types 3.4(17/2), 4.5.2(14/3) equals sign 2.1(15/3) Equals_Sign in Ada.Characters.Latin_1 A.3.3(10) equivalent element of a hashed set A.18.8(64/2) of an ordered set A.18.9(78/2) equivalent key of a hashed map A.18.5(42/2) of an ordered map A.18.6(55/2) 883 13 December 2012 Index Ada Reference Manual — 2012 Edition Equivalent_Elements in Ada.Containers.Hashed_Sets A.18.8(46/2), A.18.8(47/2), A.18.8(48/2) in Ada.Containers.Ordered_Sets A.18.9(3/2) Equivalent_Keys in Ada.Containers.Hashed_Maps A.18.5(34/2), A.18.5(35/2), A.18.5(36/2) in Ada.Containers.Ordered_Maps A.18.6(3/2) in Ada.Containers.Ordered_Sets A.18.9(63/2) Equivalent_Sets in Ada.Containers.Hashed_Sets A.18.8(8/2) in Ada.Containers.Ordered_Sets A.18.9(9/2) erroneous execution 1.1.2(32), 1.1.5(10) cause 3.7.2(4), 3.9(25.3/2), 6.4.1(18/3), 9.8(21), 9.10(11), 11.5(26), 13.3(13/3), 13.3(27), 13.3(28/2), 13.9.1(8), 13.9.1(12/3), 13.9.1(13/3), 13.11(21), 13.11.2(16/3), 13.13.2(53/2), A.10.3(22/1), A.12.1(36.1/1), A.13(17), A.17(28/2), A.18.2(252/2), A.18.3(157/2), A.18.4(80/2), A.18.7(101/2), A.18.18(70/3), A.18.19(11/3), A.18.20(15/3), A.18.21(16/3), A.18.22(13/3), A.18.23(16/3), A.18.24(13/3), A.18.25(15/3), B.1(38.1/3), B.3.1(51), B.3.1(55), B.3.1(56), B.3.1(57), B.3.2(35), B.3.2(36), B.3.2(37), B.3.2(38), B.3.2(39), B.3.2(42), C.3.1(14), C.3.1(14.1/3), C.7.1(18), C.7.2(14), C.7.2(15), C.7.2(15.1/2), D.2.6(31/2), D.5.1(12), D.11(9), D.14(19/2), D.14.1(25/2), D.14.2(35/2), H.4(26), H.4(27) error compile-time 1.1.2(27), 1.1.5(4) link-time 1.1.2(29), 1.1.5(4) run-time 1.1.2(30), 1.1.5(6), 11.5(2/3), 11.6(1/3) See also bounded error, erroneous execution ESA in Ada.Characters.Latin_1 A.3.3(17) ESC in Ada.Characters.Latin_1 A.3.3(6) Establish_RPC_Receiver in System.RPC E.5(12) ETB in Ada.Characters.Latin_1 A.3.3(6) ETX in Ada.Characters.Latin_1 A.3.3(5) evaluation 3.1(11), N(17.1/2), N(19) aggregate 4.3(5) allocator 4.8(7/2) array_aggregate 4.3.3(21) attribute_reference 4.1.4(11) case_expression 4.5.7(21/3) concatenation 4.5.3(5) dereference 4.1(13) discrete_range 3.6.1(8) extension_aggregate 4.3.2(7) generalized_reference 4.1.5(8/3) generic_association 12.3(21) generic_association for a formal object of mode in 12.4(11) if_expression 4.5.7(20/3) indexed_component 4.1.1(7) initialized allocator 4.8(7/2) membership test 4.5.2(27/3) name 4.1(11/2) name that has a prefix 4.1(12) null literal 4.2(9) numeric literal 4.2(9) parameter_association 6.4.1(7) prefix 4.1(12) primary that is a name 4.4(10) qualified_expression 4.7(4) quantified_expression 4.5.8(6/3) range 3.5(9) range_attribute_reference 4.1.4(11) record_aggregate 4.3.1(18) record_component_association_list 4.3.1(19) selected_component 4.1.3(14) short-circuit control form 4.5.1(7) slice 4.1.2(7) string_literal 4.2(10) uninitialized allocator 4.8(8) Val 3.5.5(7), K.2(261) Value 3.5(55/3) value conversion 4.6(28) view conversion 4.6(52) Wide_Value 3.5(43/3) Wide_Wide_Value 3.5(39.4/3) Exception 11(1/3), 11.1(1), N(18) exception function 6.8(6/3) exception occurrence 11(1/3) exception_choice 11.2(5) used 11.2(3), P exception_declaration 11.1(2/3) used 3.1(3/3), P exception_handler 11.2(3) used 11.2(2), P Exception_Id in Ada.Exceptions 11.4.1(2/2) Exception_Identity in Ada.Exceptions 11.4.1(5/2) Exception_Information in Ada.Exceptions 11.4.1(5/2) Exception_Message in Ada.Exceptions 11.4.1(4/3) Exception_Name in Ada.Exceptions 11.4.1(2/2), 11.4.1(5/2) Exception_Occurrence in Ada.Exceptions 11.4.1(3/2) Exception_Occurrence_Access in Ada.Exceptions 11.4.1(3/2) exception_renaming_declaration 8.5.2(2/3) used 8.5(2), P Exceptions child of Ada 11.4.1(2/2) Exchange_Handler in Ada.Interrupts C.3.2(8) Exclamation in Ada.Characters.Latin_1 A.3.3(8) exclamation point 2.1(15/3) Exclude in Ada.Containers.Hashed_Maps A.18.5(24/2) in Ada.Containers.Hashed_Sets A.18.8(23/2), A.18.8(54/2) in Ada.Containers.Ordered_Maps A.18.6(23/2) in Ada.Containers.Ordered_Sets A.18.9(22/2), A.18.9(67/2) excludes null subtype 3.10(13.1/2) execution 3.1(11), N(19) abort_statement 9.8(4) aborting the execution of a construct 9.8(5) accept_statement 9.5.2(24) Ada program 9(1/3) assignment_statement 5.2(7), 7.6(17), 7.6.1(12/2) asynchronous_select with a delay_statement trigger 9.7.4(7) asynchronous_select with a procedure call trigger 9.7.4(6/2) asynchronous_select with an entry call trigger 9.7.4(6/2) block_statement 5.6(5) call on a dispatching operation 3.9.2(14) call on an inherited subprogram 3.4(27/2) case_statement 5.4(11/3) conditional_entry_call 9.7.3(3) delay_statement 9.6(20) dynamically enclosing 11.4(2) entry_body 9.5.2(26) entry_call_statement 9.5.3(8) exit_statement 5.7(5) extended_return_statement 6.5(5.11/3) goto_statement 5.8(5) handled_sequence_of_statements 11.2(10) handler 11.4(7) if_statement 5.3(5/3) Index 13 December 2012 884 instance of Unchecked_Deallocation attribute_definition_clause name discriminant_association expression Ada Reference Manual — 2012 Edition 7.6.1(10) loop_statement 5.5(7) loop_statement with a for iteration_scheme 5.5(9/3) loop_statement with a while iteration_scheme 5.5(8) null_statement 5.1(13) partition 10.2(25) pragma 2.8(12) program 10.2(25) protected subprogram call 9.5.1(3) raise_statement with an exception_name 11.3(4/2) re-raise statement 11.3(4/2) remote subprogram call E.4(9) requeue protected entry 9.5.4(9) requeue task entry 9.5.4(8) requeue_statement 9.5.4(7/3) selective_accept 9.7.1(15) sequence_of_statements 5.1(15) simple_return_statement 6.5(6/2) subprogram call 6.4(10/2) subprogram_body 6.3(7) task 9.2(1) task_body 9.2(1) timed_entry_call 9.7.2(4/2) execution resource associated with a protected object 9.4(18) required for a task to run 9(10) execution time of a task D.14(11/3) Execution_Time child of Ada D.14(3/2) exhaust a budget D.14.2(14/2) exist cease to 7.6.1(11/3), 13.11.2(10/2) Exists in Ada.Directories A.16(24/2) in Ada.Environment_Variables A.17(5/2) exit_statement 5.7(2) used 5.1(4/2), P Exit_Status in Ada.Command_Line A.15(7) Exp in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(3) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(4) expanded name 4.1.3(4) Expanded_Name in Ada.Tags 3.9(7/2) expected profile 8.6(26) accept_statement entry_direct_name 9.5.2(11) 13.3(4) 3.7.1(6) character_literal 4.2(3) formal subprogram actual 12.6(6) formal subprogram default_name 12.6(5) Dispatching_Domains pragma argument J.15.10(3/3) entry_index 9.5.2(11) enumeration_representation_clause name in an aspect_specification expressions 13.4(4) 13.1.1(8/3) expression in an aspect_specification subprogram_renaming_declaration 8.5.4(3) 13.1.1(7/3) expression of a expected type 8.6(20/2) abort_statement task_name 9.8(3) access attribute_reference 3.10.2(2/2) Access attribute_reference prefix Default_Component_Value aspect 3.6(22.4/3) expression of a Default_Value aspect 3.5(56.5/3) 3.10.2(2.3/2) expression of a predicate aspect actual parameter 6.4.1(3) aggregate 4.3(3/2) allocator 4.8(3/3) array_aggregate 4.3.3(7/2) array_aggregate component expression 4.3.3(7/2) 3.2.4(2/3) expression of expression function 6.8(3/3) expression of extended_return_statement 6.5(3/2) expression of simple_return_statement array_aggregate discrete_choice 6.5(3/2) 4.3.3(8) assignment_statement expression 5.2(4/2) assignment_statement variable_name 5.2(4/2) Attach_Handler pragma second argument J.15.7(6/3) attribute_definition_clause expression or extension_aggregate 4.3.2(4/2) extension_aggregate ancestor expression 4.3.2(4/2) external name J.15.5(6/3) first_bit 13.5.1(7) fixed point type delta 3.5.9(6) generic formal in object actual 12.4(4) generic formal object name 13.3(4) attribute_designator expression default_expression 12.4(3) index_constraint discrete_range 4.1.4(7) 3.6.1(4) case_expression selecting_expression indexable_container_object_prefix 4.5.7(15/3) 4.1.6(11/3) case_expression_alternative indexed_component expression discrete_choice 4.5.7(15/3) 4.1.1(4) case_statement selecting_expression Interrupt_Priority pragma argument 5.4(4/3) case_statement_alternative discrete_choice 5.4(4/3) character_literal 4.2(3) code_statement 13.8(4) component_clause expressions 13.5.1(7) component_declaration default_expression 3.8(7) condition 4.5.7(14/3) CPU pragma argument J.15.9(3/3) decimal fixed point type digits 3.5.9(6) delay_relative_statement expression 9.6(5) J.15.11(5/3) invariant expression 7.3.2(4/3) iterable_name 5.5.2(3/3) iterator_name 5.5.2(3/3) last_bit 13.5.1(7) link name J.15.5(6/3) linker options B.1(10.1/3) membership test simple_expression 4.5.2(3/3) modular_type_definition expression 3.5.4(5) name in an aspect_specification 13.1.1(7/3) number_declaration expression delay_until_statement expression 3.3.2(3) 9.6(5) delta_constraint expression J.3(3) dependent_expression 4.5.7(8/3) dereference name 4.1(8) discrete_subtype_definition range object in an aspect_specification 13.1.1(6/3) object_declaration initialization expression 3.3.1(4) parameter default_expression 6.1(17) position 13.5.1(7) postcondition expression 6.1.1(6/3) Access attribute_reference prefix 3.6(8) 3.10.2(2.3/2) discriminant default_expression 3.7(7) 885 13 December 2012 Index Ada Reference Manual — 2012 Edition precondition expression 6.1.1(6/3) Priority pragma argument J.15.11(5/3) quantified_expression 4.5.8(5/3) range simple_expressions 3.5(5) range_attribute_designator expression 4.1.4(7) range_constraint range 3.5(5) real_range_specification bounds 3.5.7(5) record_aggregate 4.3.1(8/2) record_component_association expression 4.3.1(10) reference_object_name 4.1.5(5/3) Relative_Deadline pragma argument J.15.12(3/3) requested decimal precision 3.5.7(4) restriction parameter expression 13.12(5) selecting_expression case_expression 4.5.7(15/3) selecting_expression case_statement 5.4(4/3) short-circuit control form relation 4.5.1(1) signed_integer_type_definition simple_expression 3.5.4(5) slice discrete_range 4.1.2(4) Storage_Size pragma argument J.15.4(4/3) string_literal 4.2(4) subpool_handle_name 4.8(3/3) type_conversion operand 4.6(6) variant_part discrete_choice 3.8.1(6) expiration time [partial] 9.6(1) for a delay_relative_statement 9.6(20) for a delay_until_statement 9.6(20) expires execution timer D.14.1(15/3) explicit declaration 3.1(5), N(11) explicit initial value 3.3.1(1/3) explicit_actual_parameter 6.4(6) used 6.4(5), P explicit_dereference 4.1(5) used 4.1(2/3), P explicit_generic_actual_parameter 12.3(5) used 12.3(4), P explicitly aliased parameter 6.1(23.1/3) explicitly assign 10.2(2) explicitly limited record 3.8(13.1/3) exponent 2.4.1(4), 4.5.6(11/3) used 2.4.1(2), 2.4.2(2), P Exponent attribute A.5.3(18) exponentiation operator 4.4(1/3), 4.5.6(7) Export aspect B.1(1/3) Export pragma J.15.5(3/3), L(13.1/3) exported entity B.1(23/3) expression 4.4(1/3), 4.4(2) predicate-static 3.2.4(15/3) used 2.8(3/3), 3.3.1(2/3), 3.3.2(2), F 3.5.4(4), 3.5.7(2), 3.5.9(3), 3.5.9(4), 3.5.9(5), 3.7(6), 3.7.1(3), 4.1.1(2), 4.1.4(3/2), 4.1.4(5), 4.3.1(4/2), 4.3.2(3), 4.3.3(3/2), 4.3.3(5/2), 4.4(7/3), 4.5.7(3/3), 4.5.7(4/3), 4.5.7(5/3), 4.5.7(6/3), 4.5.8(3/3), 4.6(2), 4.7(2), 5.2(2), 5.4(2/3), 6.4(6), 6.5(2.1/3), 6.5(2/2), 6.8(2/3), 9.5.2(4), 9.6(3), 9.6(4), 11.3(2/2), 11.4.2(3/2), 12.3(5), 13.1.1(4/3), 13.3(2), 13.5.1(4), 13.12(4.1/2), B.1(8), B.1(10.1/3), D.2.2(3.2/2), J.3(2), J.7(1), J.8(1), J.15.4(2/3), J.15.5(2/3), J.15.5(3/3), J.15.7(4/3), J.15.9(2/3), L(2.1/2), L(6.1/3), L(8.2/3), L(13.1/3), L(14.1/3), L(19), L(27.2/2), L(35.1/3), P expression_function_declaration 6.8(2/3) used 3.1(3/3), P extended_digit 2.4.2(5) used 2.4.2(4), P Extended_Index subtype of Index_Type'Base in Ada.Containers.Vectors A.18.2(7/2) extended_return_object_declaration 6.5(2.1/3) used 6.5(2.2/3), P extended_return_statement 6.5(2.2/3) used 5.1(5/2), P extension of a private type 3.9(2.1/2), 3.9.1(1/2) of a record type 3.9(2.1/2), 3.9.1(1/2) of a type 3.9(2/2), 3.9.1(1/2) in Ada.Directories A.16(18/2) extension_aggregate 4.3.2(2) used 4.3(2), P external call 9.5(4/3) external effect of the execution of an Ada program 1.1.3(8) volatile/atomic objects C.6(20) external file A.7(1) external interaction 1.1.3(8) external name B.1(34) external requeue 9.5(7) external streaming type supports 13.13.2(52/3) External_Name aspect B.1(1/3) External_Tag in Ada.Tags 3.9(7/2) External_Tag aspect 13.3(75/3), K.2(65) External_Tag attribute 13.3(75/3) External_Tag clause 13.3(7/2), 13.3(75/3), K.2(65) extra permission to avoid raising factor 4.4(6) used 4.4(5), P factory 3.9(30/2) failure of a language-defined check 11.5(2/3) in Ada.Command_Line A.15(8) fall-back handler C.7.3(9/2) False 3.5.3(1) family entry 9.5.2(20) Feminine_Ordinal_Indicator in Ada.Characters.Latin_1 A.3.3(21/3) FF in Ada.Characters.Latin_1 A.3.3(5) Field subtype of Integer in Ada.Text_IO A.10.1(6) FIFO_Queuing queuing policy D.4(7/2) FIFO_Within_Priorities task dispatching policy D.2.3(2/2) file as file object A.7(2/3) file name A.16(46/2) file terminator A.10(7) File_Access in Ada.Text_IO A.10.1(18) File_Kind in Ada.Directories A.16(22/2) File_Mode in Ada.Direct_IO A.8.4(4) in Ada.Sequential_IO A.8.1(4) in Ada.Streams.Stream_IO A.12.1(6) in Ada.Text_IO A.10.1(4) File_Size in Ada.Directories A.16(23/2) File_Type in Ada.Direct_IO A.8.4(3) in Ada.Sequential_IO A.8.1(3) in Ada.Streams.Stream_IO A.12.1(5) in Ada.Text_IO A.10.1(3) Filter_Type in Ada.Directories A.16(30/2) finalization of a master 7.6.1(4) of a protected object 9.4(20) of a protected object C.3.1(12/3) of a task object J.7.1(8) of an object 7.6.1(5) of environment task for a foreign language main subprogram B.1(39/3) child of Ada 7.6(4/3) Finalize 7.6(2) in Ada.Finalization 7.6(6/2), 7.6(8/2) Find in Ada.Containers.Doubly_Linked_- exceptions 11.6(5) Lists A.18.3(41/2) extra permission to reorder actions 11.6(6/3) in Ada.Containers.Hashed_Maps A.18.5(30/2) Index 13 December 2012 886 in Ada.Containers.Hashed_Sets A.18.8(43/2), A.18.8(56/2) First_Element in Ada.Containers.Doubly_Linked_- in Ada.Containers.Multiway_Trees Lists A.18.3(34/2) A.18.10(38/3) in Ada.Containers.Ordered_Maps in Ada.Containers.Ordered_Maps A.18.6(29/2) Ada Reference Manual — 2012 Edition formal parameter of a subprogram 6.1(17) formal subprogram, generic 12.6(1) formal subtype 12.5(5) formal type 12.5(5) formal_abstract_subprogram_declaration 12.6(2.2/3) used 12.6(2/2), P formal_access_type_definition 12.5.4(2) used 12.5(3/2), P formal_array_type_definition 12.5.3(2) used 12.5(3/2), P formal_complete_type_declaration 12.5(2.1/3) used 12.5(2/3), P formal_concrete_subprogram_declaration 12.6(2.1/3) used 12.6(2/2), P formal_decimal_fixed_point_definition 12.5.2(7) used 12.5(3/2), P formal_derived_type_definition 12.5.1(3/2) used 12.5(3/2), P formal_discrete_type_definition 12.5.2(2) used 12.5(3/2), P formal_floating_point_definition 12.5.2(5) used 12.5(3/2), P formal_incomplete_type_declaration 12.5(2.2/3) used 12.5(2/3), P formal_interface_type_definition 12.5.5(2/2) used 12.5(3/2), P formal_modular_type_definition 12.5.2(4) used 12.5(3/2), P formal_object_declaration 12.4(2/3) used 12.1(6), P formal_ordinary_fixed_point_definition in Ada.Containers.Ordered_Sets A.18.9(42/2) in Ada.Containers.Vectors A.18.2(59/2) First_Index in Ada.Containers.Vectors A.18.2(57/2) First_Key in Ada.Containers.Ordered_Maps A.18.6(30/2) First_Valid attribute 3.5.5(7.2/3) Fixed child of Ada.Strings A.4.3(5) fixed point type 3.5.9(1) Fixed_IO in Ada.Text_IO A.10.1(68) fixed_point_definition 3.5.9(2) used 3.5.6(2), P Float 3.5.7(12), 3.5.7(14) in Standard A.1(21) Float_IO in Ada.Text_IO A.10.1(63) Float_Random child of Ada.Numerics A.5.2(5) Float_Text_IO child of Ada A.10.9(33) Float_Wide_Text_IO child of Ada A.11(2/2) Float_Wide_Wide_Text_IO child of Ada A.11(3/2) Floating in Interfaces.COBOL B.4(9) floating point type 3.5.7(1) floating_point_definition 3.5.7(2) used 3.5.6(2), P Floor in Ada.Containers.Ordered_Maps A.18.6(40/2) 12.5.2(6) in Ada.Containers.Ordered_Sets A.18.9(50/2), A.18.9(70/2) Floor attribute A.5.3(30) Flush in Ada.Streams.Stream_IO A.12.1(25/1) in Ada.Text_IO A.10.1(21/1) Fore attribute 3.5.10(4) form of an external file A.7(1) in Ada.Direct_IO A.8.4(9) in Ada.Sequential_IO A.8.1(9) in Ada.Streams.Stream_IO A.12.1(11) in Ada.Text_IO A.10.1(12) formal object, generic 12.4(1) formal package, generic 12.7(1) used 12.5(3/2), P formal_package_actual_part 12.7(3/2) used 12.7(2/3), P formal_package_association 12.7(3.1/2) used 12.7(3/2), P formal_package_declaration 12.7(2/3) used 12.1(6), P formal_part 6.1(14) used 6.1(12), 6.1(13/2), P formal_private_type_definition 12.5.1(2) used 12.5(3/2), P formal_signed_integer_type_definition 12.5.2(3) used 12.5(3/2), P formal_subprogram_declaration 12.6(2/2) used 12.1(6), P A.18.6(38/2) in Ada.Containers.Ordered_Sets A.18.9(49/2), A.18.9(69/2) in Ada.Containers.Vectors A.18.2(68/2) Find_In_Subtree in Ada.Containers.Multiway_Trees A.18.10(39/3) Find_Index in Ada.Containers.Vectors A.18.2(67/2) Find_Token in Ada.Strings.Bounded A.4.4(50.1/3), A.4.4(51) in Ada.Strings.Fixed A.4.3(15.1/3), A.4.3(16) in Ada.Strings.Unbounded A.4.5(45.1/3), A.4.5(46) Fine_Delta in System 13.7(9) First in Ada.Containers.Doubly_Linked_- Lists A.18.3(33/2) in Ada.Containers.Hashed_Maps A.18.5(27/2) in Ada.Containers.Hashed_Sets A.18.8(40/2) in Ada.Containers.Ordered_Maps A.18.6(28/2) in Ada.Containers.Ordered_Sets A.18.9(41/2) in Ada.Containers.Vectors A.18.2(58/2) in Ada.Iterator_Interfaces 5.5.1(3/3) First attribute 3.5(12), 3.6.2(3) first element of a hashed set A.18.8(68/2) of a set A.18.7(6/2) of an ordered set A.18.9(81/3) first node of a hashed map A.18.5(46/2) of a map A.18.4(6/2) of an ordered map A.18.6(58/3) first subtype 3.2.1(6), 3.4.1(5) First(N) attribute 3.6.2(4) first_bit 13.5.1(5) used 13.5.1(3), P First_Bit attribute 13.5.2(3/2) First_Child in Ada.Containers.Multiway_Trees A.18.10(60/3) First_Child_Element in Ada.Containers.Multiway_Trees A.18.10(61/3) 887 13 December 2012 Index Ada Reference Manual — 2012 Edition formal_type_declaration 12.5(2/3) used 12.1(6), P formal_type_definition 12.5(3/2) used 12.5(2.1/3), P format_effector 2.1(13/3) Formatting child of Ada.Calendar 9.6.1(15/2) Fortran child of Interfaces B.5(4) Fortran interface B.5(1/3) Fortran standard 1.2(3/2) Fortran_Character in Interfaces.Fortran B.5(12/3) Fortran_Integer in Interfaces.Fortran B.5(5) forward iterator 5.5.2(4/3) Forward_Iterator in Ada.Iterator_Interfaces 5.5.1(3/3) Fraction attribute A.5.3(21) Fraction_One_Half in Ada.Characters.Latin_1 A.3.3(22) Fraction_One_Quarter in Ada.Characters.Latin_1 A.3.3(22) Fraction_Three_Quarters in Ada.Characters.Latin_1 A.3.3(22) Free in Ada.Strings.Unbounded A.4.5(7) in Interfaces.C.Strings B.3.1(11) freed See nonexistent 13.11.2(10/2) freeing storage 13.11.2(1) freezing by a constituent of a construct 13.14(4/1) by an expression 13.14(8/3) by an implicit call 13.14(8.1/3) by an object name 13.14(8/3) class-wide type caused by the freezing of the specific type 13.14(15) constituents of a full type definition 13.14(15) designated subtype caused by an allocator 13.14(13) entity 13.14(2) entity caused by a body 13.14(3/3) entity caused by a construct 13.14(4/1) entity caused by a name 13.14(11) entity caused by the end of an enclosing construct 13.14(3/3) expression of an expression function by object_declaration 13.14(6) profile 13.14(2.1/3) profile of a callable entity by an instantiation 13.14(10.2/3) profile of a function call 13.14(10.1/3) specific type caused by the freezing of the class-wide type 13.14(15) subtype caused by a record extension 13.14(7) subtype caused by an implicit conversion 13.14(8.2/1) subtype caused by an implicit dereference 13.14(11.1/1) subtypes of the profile of a callable entity 13.14(14/3) type caused by a range 13.14(12) type caused by an expression 13.14(10) type caused by the freezing of a subtype 13.14(15) freezing points entity 13.14(2) Friday in Ada.Calendar.Formatting 9.6.1(17/2) FS in Ada.Characters.Latin_1 A.3.3(6) full conformance for discrete_subtype_definitions 6.3.1(24) for expressions 6.3.1(19) for known_discriminant_parts 6.3.1(23) for profiles 6.3.1(18/3) required 3.10.1(4/3), 6.3(4), 6.7(2.1/3), 6.8(4/3), 7.3(9), 8.3(12.3/2), 8.5.4(5/3), 9.5.2(14), 9.5.2(16), 9.5.2(17), 10.1.3(11), 10.1.3(12) full constant declaration 3.3.1(6/3) corresponding to a formal object of mode in 12.4(10/2) full declaration 7.4(2/3) full name of a file A.16(47/2) full stop 2.1(15/3) full type 3.2.1(8/2) full type definition 3.2.1(8/2) full view of a type 3.2.1(8/2) Full_Name in Ada.Directories A.16(15/2), a call 13.14(10.1/3) A.16(39/2) expression of an expression function by Access attribute 13.14(10.3/3) expression of an expression function by an instantiation 13.14(10.2/3) first subtype caused by the freezing of the type 13.14(15) generic_instantiation 13.14(5/3) nominal subtype caused by a name Full_Stop in Ada.Characters.Latin_1 A.3.3(8) full_type_declaration 3.2.1(3/3) used 3.2.1(2), P function 6(1), N(19.1/2) expression 6.8(6/3) with a controlling access result 3.9.2(2/3) 13.14(11) with a controlling result 3.9.2(2/3) function call master of 3.10.2(10.1/3) function instance 12.3(13) function_call 6.4(3) used 4.1(2/3), P function_specification 6.1(4.2/2) used 6.1(4/2), 6.8(2/3), P G general access type 3.10(7/1), 3.10(8) general_access_modifier 3.10(4) used 3.10(3), P generalized iterator 5.5.2(3/3) generalized_indexing 4.1.6(10/3) used 4.1(2/3), P generalized_reference 4.1.5(4/3) used 4.1(2/3), P generation of an interrupt C.3(2) Generator in Ada.Numerics.Discrete_Random A.5.2(19) in Ada.Numerics.Float_Random A.5.2(7) generic actual 12.3(7/3) generic actual parameter 12.3(7/3) generic actual subtype 12.5(4) generic actual type 12.5(4) generic body 12.2(1) generic contract issue 10.2.1(10/2) [partial] 3.2.4(29/3), 3.4(5.1/3), 3.7(10/3), 3.7.1(7/3), 3.9.1(3/2), 3.9.4(17/2), 3.10.2(28.1/3), 3.10.2(32/3), 4.1.6(9/3), 4.5.2(9.8/3), 4.6(24.17/3), 4.6(24.21/2), 4.8(5.6/3), 4.9(37/2), 6.5.1(6/2), 7.3(8), 8.3(26/2), 8.3.1(7/2), 8.5.1(4.6/2), 8.5.1(5/3), 8.5.4(4.3/2), 9.1(9.9/2), 9.4(11.13/2), 9.4(11.8/2), 9.5(17/3), 9.5.2(13.4/2), 10.2.1(11.7/3), 10.2.1(11/3), 10.2.1(17/3), 12.4(8.5/2), 12.6(8.3/2), 13.11.2(3.1/3), 13.11.4(23/3), B.3.3(10/3), C.3.1(7/3), J.15.7(7/3) generic formal 12.1(9) generic formal object 12.4(1) generic formal package 12.7(1) generic formal subprogram 12.6(1) generic formal subtype 12.5(5) generic formal type 12.5(5) generic function 12.1(8/2) generic package 12.1(8/2) generic procedure 12.1(8/2) generic subprogram 12.1(8/2) generic unit 12(1), N(20) See also dispatching operation 3.9(1) generic_actual_part 12.3(3) used 12.3(2/3), 12.7(3/2), P Generic_Array_Sort child of Ada.Containers A.18.26(3/2) Index 13 December 2012 888 generic_association 12.3(4) used 12.3(3), 12.7(3.1/2), P Generic_Bounded_Length in Ada.Strings.Bounded A.4.4(4) Generic_Complex_Arrays child of Ada.Numerics G.3.2(2/2) Generic_Complex_Elementary_Functions child of Ada.Numerics G.1.2(2/2) Generic_Complex_Types child of Ada.Numerics G.1.1(2/1) Generic_Constrained_Array_Sort child of Ada.Containers A.18.26(7/2) generic_declaration 12.1(2) used 3.1(3/3), 10.1.1(5), P Generic_Dispatching_Constructor child of Ada.Tags 3.9(18.2/3) Generic_Elementary_Functions child of Ada.Numerics A.5.1(3) generic_formal_parameter_declaration 12.1(6) used 12.1(5), P generic_formal_part 12.1(5) used 12.1(3/3), 12.1(4), P generic_instantiation 12.3(2/3) used 3.1(3/3), 10.1.1(5), P Generic_Keys in Ada.Containers.Hashed_Sets A.18.8(50/2) in Ada.Containers.Ordered_Sets A.18.9(62/2) generic_package_declaration 12.1(4) used 12.1(2), P Generic_Real_Arrays child of Ada.Numerics G.3.1(2/2) generic_renaming_declaration 8.5.5(2/3) used 8.5(2), 10.1.1(6), P Generic_Sort child of Ada.Containers A.18.26(9.2/3) Generic_Sorting in Ada.Containers.Doubly_Linked_- Lists A.18.3(47/2) in Ada.Containers.Vectors A.18.2(75/2) generic_subprogram_declaration 12.1(3/3) used 12.1(2), P Get in Ada.Text_IO A.10.1(41), A.10.1(47), A.10.1(54), A.10.1(55), A.10.1(59), A.10.1(60), A.10.1(65), A.10.1(67), A.10.1(70), A.10.1(72), A.10.1(75), A.10.1(77), A.10.1(81), A.10.1(83) in Ada.Text_IO.Complex_IO G.1.3(6), G.1.3(8) Get_CPU in Ada.Interrupts C.3.2(10.1/3) in System.Multiprocessors.Dispatching_ Domains D.16.1(13/3) Ada Reference Manual — 2012 Edition Get_Deadline in Ada.Dispatching.EDF D.2.6(9/2) Get_Dispatching_Domain in Group_Budget_Error in Ada.Execution_Time.Group_Budgets D.14.2(11/2) System.Multiprocessors.Dispatching_ Domains D.16.1(10/3) Group_Budget_Handler in Get_First_CPU in System.Multiprocessors.Dispatching_ Domains D.16.1(8/3) Ada.Execution_Time.Group_Budgets D.14.2(5/2) Group_Budgets child of Ada.Execution_Time Get_Immediate in Ada.Text_IO A.10.1(44), A.10.1(45) Get_Last_CPU in System.Multiprocessors.Dispatching_ Domains D.16.1(9/3) Get_Line in Ada.Text_IO A.10.1(49), A.10.1(49.1/2) in Ada.Text_IO.Bounded_IO A.10.11(8/2), A.10.11(9/2), A.10.11(10/2), A.10.11(11/2) in Ada.Text_IO.Unbounded_IO A.10.12(8/2), A.10.12(9/2), A.10.12(10/2), A.10.12(11/2) Get_Next_Entry in Ada.Directories A.16(35/2) Get_Priority in Ada.Dynamic_Priorities D.5.1(5) global to 8.1(15) Glossary N(1/2) goto_statement 5.8(2) used 5.1(4/2), P govern a variant 3.8.1(20) govern a variant_part 3.8.1(20) grammar complete listing P cross reference P notation 1.1.4(3) resolution of ambiguity 8.6(3) under Syntax heading 1.1.2(25) graphic character a category of Character A.3.2(23) graphic_character 2.1(14/3) used 2.5(2), 2.6(3), P Graphic_Set in Ada.Strings.Maps.Constants A.4.6(4) Grave in Ada.Characters.Latin_1 A.3.3(13) greater than operator 4.4(1/3), 4.5.2(1) greater than or equal operator 4.4(1/3), 4.5.2(1) greater-than sign 2.1(15/3) Greater_Than_Sign in Ada.Characters.Latin_1 A.3.3(10) Group_Budget in D.14.2(3/3) GS in Ada.Characters.Latin_1 A.3.3(6) guard 9.7.1(3) used 9.7.1(2), P H handle an exception 11(1/3), N(18) an exception occurrence 11.4(1), 11.4(7) subpool 13.11.4(18/3) handled_sequence_of_statements 11.2(2) used 5.6(2), 6.3(2/3), 6.5(2.2/3), 7.2(2/3), 9.1(6/3), 9.5.2(3), 9.5.2(5), P handler execution timer D.14.1(13/2) group budget D.14.2(14/2) interrupt C.3(2) termination C.7.3(8/3) timing event D.15(10/2) Handling child of Ada.Characters A.3.2(2/2) child of Ada.Wide_Characters A.3.5(3/3) child of Ada.Wide_Wide_Characters A.3.6(1/3) Has_Element in Ada.Containers.Doubly_Linked_- Lists A.18.3(9.1/3) in Ada.Containers.Hashed_Maps A.18.5(6.1/3) in Ada.Containers.Hashed_Sets A.18.8(6.1/3) in Ada.Containers.Multiway_Trees A.18.10(12/3) in Ada.Containers.Ordered_Maps A.18.6(7.1/3) in Ada.Containers.Ordered_Sets A.18.9(7.1/3) in Ada.Containers.Vectors A.18.2(11.1/3) Has_Same_Storage attribute 13.3(73.2/3) Hash child of Ada.Strings A.4.9(2/3) child of Ada.Strings.Bounded A.4.9(7/3) child of Ada.Strings.Unbounded Ada.Execution_Time.Group_Budgets D.14.2(4/3) A.4.9(10/3) 889 13 December 2012 Index Ada Reference Manual — 2012 Edition Hash_Case_Insensitive child of Ada.Strings A.4.9(11.2/3) child of Ada.Strings.Bounded A.4.9(11.7/3) child of Ada.Strings.Fixed A.4.9(11.5/3) child of Ada.Strings.Unbounded A.4.9(11.10/3) Hash_Type in Ada.Containers A.18.1(4/2) Hashed_Maps child of Ada.Containers A.18.5(2/3) Hashed_Sets child of Ada.Containers A.18.8(2/3) Head in Ada.Strings.Bounded A.4.4(70), A.4.4(71) in Ada.Strings.Fixed A.4.3(35), A.4.3(36) in Ada.Strings.Unbounded A.4.5(65), A.4.5(66) head (of a queue) D.2.1(5/2) heap management user-defined 13.11(1) See also allocator 4.8(1) held priority D.11(4/2) heterogeneous input-output A.12.1(1) hexadecimal literal 2.4.2(1) hexadecimal digit a category of Character A.3.2(30) hexadecimal literal 2.4.2(1) Hexadecimal_Digit_Set in Ada.Strings.Maps.Constants A.4.6(4) hidden from all visibility 8.3(5), 8.3(14) by lack of a with_clause 8.3(20/2) for a declaration completed by a subsequent declaration 8.3(19) for overridden declaration 8.3(15) within the declaration itself 8.3(16) hidden from direct visibility 8.3(5), 8.3(21) by an inner homograph 8.3(22) where hidden from all visibility 8.3(23) hiding 8.3(5) Hierarchical_File_Names child of Ada.Directories A.16.1(3/3) High_Order_First 13.5.3(2) in Interfaces.COBOL B.4(25) in System 13.7(15/2) highest precedence operator 4.5.6(1) highest_precedence_operator 4.5(7) Hold in Ada.Asynchronous_Task_Control D.11(3/2) Holder in Ada.Containers.Indefinite_Holders A.18.18(6/3) homograph 8.3(8) Hour in Ada.Calendar.Formatting 9.6.1(24/2) Hour_Number subtype of Natural in Ada.Calendar.Formatting 9.6.1(20/2) HT in Ada.Characters.Latin_1 A.3.3(5) HTJ in Ada.Characters.Latin_1 A.3.3(17) HTS in Ada.Characters.Latin_1 A.3.3(17) Hyphen in Ada.Characters.Latin_1 A.3.3(8) hyphen-minus 2.1(15/3) I i in Ada.Numerics.Generic_Complex_- Types G.1.1(5) in Interfaces.Fortran B.5(10) identifier 2.3(2/2) used 2.8(2), 2.8(3/3), 2.8(21), 2.8(23), 3.1(4), 4.1(3), 4.1.3(3), 4.1.4(3/2), 5.5(2), 5.6(2), 6.1(5), 7.1(3/3), 7.2(2/3), 9.1(4), 9.1(6/3), 9.4(4), 9.4(7/3), 9.5.2(3), 9.5.2(5), 11.4.2(6.1/3), 11.4.2(6/2), 11.5(4.1/2), 11.5(4/2), 13.1.1(3/3), 13.1.1(4/3), 13.12(4/2), 13.12(11/3), D.2.2(3), D.2.2(3.2/2), D.3(3), D.3(4), D.4(3), D.4(4), H.6(3/2), J.10(3/2), J.15.5(2/3), J.15.5(3/3), J.15.5(4/3), L(2.2/2), L(2.3/3), L(8.1/3), L(13.1/3), L(14.1/3), L(20), L(21), L(23), L(25.1/2), L(27.2/2), L(27.3/3), L(29), L(36), L(37), L(37.3/2), M.2(98), P identifier specific to a pragma 2.8(10/3) identifier_extend 2.3(3.1/3) used 2.3(2/2), P identifier_start 2.3(3/2) used 2.3(2/2), P Identity in Ada.Strings.Maps A.4.2(22) in Ada.Strings.Wide_Maps A.4.7(22) in Ada.Strings.Wide_Wide_Maps A.4.8(22/2) Identity attribute 11.4.1(9), C.7.1(12) idle task D.11(4/2) if_expression 4.5.7(3/3) used 4.5.7(2/3), P if_statement 5.3(2) used 5.1(5/2), P illegal construct 1.1.2(27) partition 1.1.2(29) Im in Ada.Numerics.Generic_Complex_- Arrays G.3.2(7/2), G.3.2(27/2) in Ada.Numerics.Generic_Complex_- Types G.1.1(6) image of a value 3.5(27.3/2), 3.5(30/3), K.2(273/3), K.2(277.4/2) in Ada.Calendar.Formatting 9.6.1(35/2), 9.6.1(37/2) in Ada.Numerics.Discrete_Random A.5.2(26) in Ada.Numerics.Float_Random A.5.2(14) in Ada.Task_Identification C.7.1(3/3) in Ada.Text_IO.Editing F.3.3(13) Image attribute 3.5(35) Imaginary in Ada.Numerics.Generic_Complex_- Types G.1.1(4/2) Imaginary subtype of Imaginary in Interfaces.Fortran B.5(10) immediate scope of (a view of) an entity 8.2(11) of a declaration 8.2(2) Immediate_Reclamation restriction H.4(10) immediately enclosing 8.1(13) immediately visible 8.3(4), 8.3(21) immediately within 8.1(13) immutably limited 7.5(8.1/3) implementation advice 1.1.2(37) summary of advice M.3(1/2) implementation defined 1.1.3(18) summary of characteristics M.2(1/2) implementation permissions 1.1.2(36) implementation requirements 1.1.2(33) implementation-dependent See unspecified 1.1.3(18) implemented by a protected entry 9.4(11.1/3) by a protected subprogram 9.4(11.1/3) by a task entry 9.1(9.2/3) implicit conversion legality 8.6(27.1/3) implicit declaration 3.1(5), N(11) implicit initial values for a subtype 3.3.1(10) implicit subtype conversion 4.6(59), 4.6(60) Access attribute 3.10.2(30) access discriminant 3.7(27/2) array bounds 4.6(38) array index 4.1.1(7) assignment to view conversion 4.6(55) assignment_statement 5.2(11) bounds of a decimal fixed point type 3.5.9(16) bounds of a fixed point type 3.5.9(14) bounds of a range 3.5(9), 3.6(18) Index 13 December 2012 890 Ada Reference Manual — 2012 Edition choices of aggregate 4.3.3(22) component defaults 3.3.1(13/3) default value of a scalar 3.3.1(11.1/3) delay expression 9.6(20) derived type discriminants 3.4(21) discriminant values 3.7.1(12) entry index 9.5.2(24) expressions in aggregate 4.3.1(19) expressions of aggregate 4.3.3(23) function return 6.5(5.11/3), 6.5(6/2) generic formal object of mode in 12.4(11) inherited enumeration literal 3.4(29) initialization expression 3.3.1(17) initialization expression of allocator 4.8(7/2) Interrupt_Priority aspect D.1(17/3), Indefinite_Hashed_Sets child of Ada.Containers A.18.15(2/3) Indefinite_Holders child of Ada.Containers A.18.18(5/3) Indefinite_Multiway_Trees child of Ada.Containers A.18.17(2/3) Indefinite_Ordered_Maps child of Ada.Containers A.18.14(2/3) Indefinite_Ordered_Sets child of Ada.Containers A.18.16(2/3) Indefinite_Vectors child of Ada.Containers A.18.11(2/3) Independent aspect C.6(6.3/3) Independent pragma J.15.8(4/3), L(14.2/3) independent subprogram 11.6(6/3) Independent_Components aspect D.3(6.1/3) C.6(6.9/3) named number value 3.3.2(6) operand of concatenation 4.5.3(9) parameter passing 6.4.1(10), 6.4.1(11), 6.4.1(17) Priority aspect D.1(17/3), D.3(6.1/3) qualified_expression 4.7(4) reading a view conversion 4.6(56) result of inherited function 3.4(27/2) implicit_dereference 4.1(6) used 4.1(4), P Implicit_Dereference aspect 4.1.5(2/3) Import aspect B.1(1/3) Import pragma J.15.5(2/3), L(14.1/3) imported entity B.1(23/3) in (membership test) 4.4(1/3), 4.5.2(2/3) inaccessible partition E.1(7) inactive a task state 9(10) Include in Ada.Containers.Hashed_Maps A.18.5(22/2) in Ada.Containers.Hashed_Sets A.18.8(21/2) in Ada.Containers.Ordered_Maps A.18.6(21/2) in Ada.Containers.Ordered_Sets A.18.9(20/2) included one range in another 3.5(4) incomplete type 3.2(4.1/2), 3.10.1(2.1/2), N(20.1/2) incomplete view 3.10.1(2.1/2) tagged 3.10.1(2.1/2) incomplete_type_declaration 3.10.1(2/2) used 3.2.1(2), P Increment in Interfaces.C.Pointers B.3.2(11/3) indefinite subtype 3.3(23/3), 3.7(26) Indefinite_Doubly_Linked_Lists child of Ada.Containers A.18.12(2/3) Indefinite_Hashed_Maps child of Ada.Containers A.18.13(2/3) Independent_Components pragma J.15.8(7/3), L(14.3/3) independently addressable 9.10(1/3) specified C.6(8.1/3) index of an element of an open direct file A.8(3) in Ada.Direct_IO A.8.4(15) in Ada.Streams.Stream_IO A.12.1(23) in Ada.Strings.Bounded A.4.4(43.1/2), A.4.4(43.2/2), A.4.4(44), A.4.4(45), A.4.4(45.1/2), A.4.4(46) in Ada.Strings.Fixed A.4.3(8.1/2), A.4.3(8.2/2), A.4.3(9), A.4.3(10), A.4.3(10.1/2), A.4.3(11) in Ada.Strings.Unbounded A.4.5(38.1/2), A.4.5(38.2/2), A.4.5(39), A.4.5(40), A.4.5(40.1/2), A.4.5(41) index range 3.6(13) index subtype 3.6(9) index type 3.6(9) Index_Check 11.5(14) [partial] 4.1.1(7), 4.1.2(7), 4.3.3(29/3), 4.3.3(30), 4.5.3(8), 4.6(51/3), 4.7(4), 4.8(10/2) index_constraint 3.6.1(2) used 3.2.2(7), P Index_Error in Ada.Strings A.4.1(5) Index_Non_Blank in Ada.Strings.Bounded A.4.4(46.1/2), A.4.4(47) in Ada.Strings.Fixed A.4.3(11.1/2), A.4.3(12) in Ada.Strings.Unbounded A.4.5(41.1/2), A.4.5(42) index_subtype_definition 3.6(4) used 3.6(3), P indexable container object 4.1.6(5/3) indexable container type 4.1.6(5/3), N(20.2/3) indexed_component 4.1.1(2) used 4.1(2/3), P indexing constant 4.1.6(12/3) variable 4.1.6(16/3) individual membership test 4.5.2(26.1/3) indivisible C.6(10/3) inferable discriminants B.3.3(20/2) Information child of Ada.Directories A.16(124/2) information hiding See package 7(1) See private types and private extensions 7.3(1) information systems C(1), F(1) informative 1.1.2(18) inherently mutable object 3.3(13/3) inheritance See derived types and classes 3.4(1/2) See also tagged types and type extension 3.9(1) inherited from an ancestor type 3.4.1(11) inherited component 3.4(11), 3.4(12) inherited discriminant 3.4(11) inherited entry 3.4(12) inherited protected subprogram 3.4(12) inherited subprogram 3.4(17/2) Initial_Directory in Ada.Directories.Hierarchical_File_Na mes A.16.1(12/3) initialization of a protected object 9.4(14) of a protected object C.3.1(10/3), C.3.1(11/3) of a task object 9.1(12/1), J.7.1(7) of an object 3.3.1(18/2) initialization expression 3.3.1(1/3), 3.3.1(4) Initialize 7.6(2) in Ada.Finalization 7.6(6/2), 7.6(8/2) initialized allocator 4.8(4) initialized by default 3.3.1(18/2) Inline aspect 6.3.2(5.1/3) Inline pragma J.15.1(2/3), L(15.1/3) innermost dynamically enclosing 11.4(2) input A.6(1/2) Input aspect 13.13.2(38/3) Input attribute 13.13.2(22), 13.13.2(32) Input clause 13.3(7/2), 13.13.2(38/3) input-output unspecified for access types A.7(6) Insert in Ada.Containers.Doubly_Linked_- Lists A.18.3(19/2), A.18.3(20/2), A.18.3(21/2) in Ada.Containers.Hashed_Maps A.18.5(19/2), A.18.5(20/2), A.18.5(21/2) 891 13 December 2012 Index Ada Reference Manual — 2012 Edition in Ada.Containers.Hashed_Sets A.18.8(19/2), A.18.8(20/2) in Ada.Containers.Ordered_Maps A.18.6(18/2), A.18.6(19/2), A.18.6(20/2) in Ada.Containers.Ordered_Sets A.18.9(18/2), A.18.9(19/2) in Ada.Containers.Vectors A.18.2(36/2), A.18.2(37/2), A.18.2(38/2), A.18.2(39/2), A.18.2(40/2), A.18.2(41/2), A.18.2(42/2), A.18.2(43/2) in Ada.Strings.Bounded A.4.4(60), A.4.4(61) in Ada.Strings.Fixed A.4.3(25), A.4.3(26) in Ada.Strings.Unbounded A.4.5(55), A.4.5(56) Insert_Child in Ada.Containers.Multiway_Trees A.18.10(48/3), A.18.10(49/3), A.18.10(50/3) Insert_Space in Ada.Containers.Vectors A.18.2(48/2), A.18.2(49/2) inspectable object H.3.2(5/2) inspection point H.3.2(5/2) Inspection_Point pragma H.3.2(3), L(16) instance of a generic function 12.3(13) of a generic package 12.3(13) of a generic procedure 12.3(13) of a generic subprogram 12.3(13) of a generic unit 12.3(1) instructions for comment submission 0.2(58/1) int in Interfaces.C B.3(7) Integer 3.5.4(11), 3.5.4(21) in Standard A.1(12) integer literal 2.4(1) integer literals 3.5.4(14), 3.5.4(30) integer type 3.5.4(1), N(21) Integer_Address in System.Storage_Elements 13.7.1(10/3) Integer_IO in Ada.Text_IO A.10.1(52) Integer_Text_IO child of Ada A.10.8(21) integer_type_definition 3.5.4(2) used 3.2.1(4/2), P Integer_Wide_Text_IO child of Ada A.11(2/2) Integer_Wide_Wide_Text_IO child of Ada A.11(3/2) interaction between tasks 9(1/3) interface 3.9.4(4/2) limited 3.9.4(5/2) nonlimited 3.9.4(5/2) protected 3.9.4(5/2) synchronized 3.9.4(5/2) task 3.9.4(5/2) type 3.9.4(4/2) interface to assembly language C.1(4/3) interface to C B.3(1/3) interface to COBOL B.4(1/3) interface to Fortran B.5(1/3) interface to other languages B(1) interface type N(21.1/2) Interface_Ancestor_Tags in Ada.Tags 3.9(7.4/2) interface_list 3.9.4(3/2) used 3.4(2/2), 3.9.4(2/2), 7.3(3/3), 9.1(2/3), 9.1(3/3), 9.4(2/3), 9.4(3/3), 12.5.1(3/2), P interface_type_definition 3.9.4(2/2) used 3.2.1(4/2), 12.5.5(2/2), P Interfaces B.2(3) Interfaces.C B.3(4) Interfaces.C.Pointers B.3.2(4) Interfaces.C.Strings B.3.1(3) Interfaces.COBOL B.4(7) Interfaces.Fortran B.5(4) interfacing aspect B.1(0.1/3) interfacing pragma J.15.5(1/3) Convention J.15.5(1/3) Export J.15.5(1/3) Import J.15.5(1/3) internal call 9.5(3/3) internal code 13.4(7) internal requeue 9.5(7) Internal_Tag in Ada.Tags 3.9(7/2) interpretation of a complete context 8.6(10) of a constituent of a complete context 8.6(15) overload resolution 8.6(14) interrupt C.3(2) example using asynchronous_select 9.7.4(10), 9.7.4(12) interrupt entry J.7.1(5) interrupt handler C.3(2) Interrupt_Clocks_Supported in Ada.Execution_Time D.14(9.1/3) Interrupt_Handler aspect C.3.1(6.2/3) Interrupt_Handler pragma J.15.7(2/3), L(17.1/3) Interrupt_Id in Ada.Interrupts C.3.2(2/3) Interrupt_Priority aspect D.1(6.3/3) Interrupt_Priority pragma J.15.11(4/3), L(18.1/3) Interrupt_Priority subtype of Any_Priority in System 13.7(16) Interrupts child of Ada C.3.2(2/3) child of Ada.Execution_Time D.14.3(3/3) Intersection in Ada.Containers.Hashed_Sets A.18.8(29/2), A.18.8(30/2) in Ada.Containers.Ordered_Sets A.18.9(30/2), A.18.9(31/2) intertask communication 9.5(1) See also task 9(1/3) Intrinsic calling convention 6.3.1(4) invalid cursor of a list container A.18.3(153/2) of a map A.18.4(76/2) of a set A.18.7(97/2) of a tree A.18.10(222/3) of a vector A.18.2(248/2) invalid representation 13.9.1(9) invariant N(21.2/3) invariant check 7.3.2(9/3) invariant expression 7.3.2(2/3) Inverse in Ada.Numerics.Generic_Complex_- Arrays G.3.2(46/2) in Ada.Numerics.Generic_Real_Arrays G.3.1(24/2) Inverted_Exclamation in Ada.Characters.Latin_1 A.3.3(21/3) Inverted_Question in Ada.Characters.Latin_1 A.3.3(22) involve an inner product complex G.3.2(56/2) real G.3.1(34/2) IO_Exceptions child of Ada A.13(3) IS1 in Ada.Characters.Latin_1 A.3.3(16) IS2 in Ada.Characters.Latin_1 A.3.3(16) IS3 in Ada.Characters.Latin_1 A.3.3(16) IS4 in Ada.Characters.Latin_1 A.3.3(16) Is_A_Group_Member in Ada.Execution_Time.Group_Budgets D.14.2(8/2) Is_Abstract in Ada.Tags 3.9(7.5/3) Is_Alphanumeric in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(12/3) Is_Attached in Ada.Interrupts C.3.2(5) Is_Basic in Ada.Characters.Handling A.3.2(4/3) Is_Callable in Ada.Task_Identification C.7.1(4/3) Index 13 December 2012 892 Ada Reference Manual — 2012 Edition Is_Character in Ada.Characters.Conversions Is_Leaf in Ada.Containers.Multiway_Trees Is_Simple_Name in A.3.4(3/2) A.18.10(21/3) Is_Control in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling Is_Letter in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling Ada.Directories.Hierarchical_File_Na mes A.16.1(4/3) Is_Sorted in Ada.Containers.Doubly_Linked_- A.3.5(5/3) Is_Current_Directory_Name in Ada.Directories.Hierarchical_File_Na mes A.16.1(7/3) A.3.5(6/3) Is_Line_Terminator in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(14/3) Is_Decimal_Digit in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling Is_Lower in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(10/3) A.3.5(7/3) Lists A.18.3(48/2) in Ada.Containers.Vectors A.18.2(76/2) Is_Space in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(18/3) Is_Special in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(13/3) Is_String in Ada.Characters.Conversions A.3.4(3/2) Is_Subset in Ada.Containers.Hashed_Sets in Ada.Containers.Ordered_Sets A.18.8(39/2) A.18.9(40/2) Is_Mark in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(15/3) Is_Member in Ada.Execution_Time.Group_Budgets D.14.2(8/2) Is_Nul_Terminated in Interfaces.C B.3(24), B.3(35), B.3(39.16/2), B.3(39.7/2) Is_Open in Ada.Direct_IO A.8.4(10) in Ada.Sequential_IO A.8.1(10) in Ada.Streams.Stream_IO A.12.1(12) in Ada.Text_IO A.10.1(13) Is_Other_Format in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling in Ada.Strings.Maps A.4.2(14) in Ada.Strings.Wide_Maps A.4.7(14) in Ada.Strings.Wide_Wide_Maps A.4.8(14/2) Is_Terminated in Ada.Task_Identification C.7.1(4/3) Is_Upper in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling Is_Descendant_At_Same_Level in Ada.Tags 3.9(7.1/2) Is_Digit in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(9/3) Is_Empty in Ada.Containers.Doubly_Linked_- Lists A.18.3(12/2) in Ada.Containers.Hashed_Maps A.18.5(11/2) in Ada.Containers.Hashed_Sets A.18.8(13/2) in Ada.Containers.Indefinite_Holders A.18.18(10/3) in Ada.Containers.Multiway_Trees A.18.10(16/3) in Ada.Containers.Ordered_Maps A.18.6(10/2) in Ada.Containers.Ordered_Sets A.3.5(16/3) A.18.9(12/2) in Ada.Containers.Vectors Is_Parent_Directory_Name in A.18.2(23/2) Is_Full_Name in Ada.Directories.Hierarchical_File_Na mes A.16.1(8/3) Ada.Directories.Hierarchical_File_Na mes A.16.1(6/3) Is_Punctuation_Connector in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling Is_Graphic in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(17/3) Is_Relative_Name in A.3.5(8/3) Is_Wide_Character in Ada.Characters.Conversions A.3.4(3/2) Is_Wide_String in Ada.Characters.Conversions A.3.4(3/2) ISO 1989:2002 1.2(4/2) ISO 639-3:2007 1.2(1.1/3) ISO 8601:2004 1.2(5.1/2) ISO/IEC 10646:2011 1.2(8/3), A.3.5(19/3) Is_Held in Ada.Asynchronous_Task_Control D.11(3/2) Is_Hexadecimal_Digit in Ada.Characters.Handling A.3.2(4/3) in Ada.Wide_Characters.Handling A.3.5(11/3) Is_In in Ada.Strings.Maps A.4.2(13) in Ada.Strings.Wide_Maps A.4.7(13) in Ada.Strings.Wide_Wide_Maps A.4.8(13/2) Ada.Directories.Hierarchical_File_Na mes A.16.1(9/3) Is_Reserved in Ada.Interrupts C.3.2(4) Is_Root in Ada.Containers.Multiway_Trees A.18.10(20/3) Is_Root_Directory_Name in Ada.Directories.Hierarchical_File_Na mes A.16.1(5/3) Is_Round_Robin in Ada.Dispatching.Round_Robin Is_ISO_646 in Ada.Characters.Handling A.3.2(10) D.2.5(4/2) 3.5.2(2/3), 3.5.2(3/3), 3.5.2(4/3) ISO/IEC 14882:2011 1.2(9/3) ISO/IEC 1539-1:2004 1.2(3/2) ISO/IEC 3166-1:2006 1.2(4.1/3) ISO/IEC 6429:1992 1.2(5) ISO/IEC 646:1991 1.2(2) ISO/IEC 8859-1:1998 1.2(6/3) ISO/IEC 9899:2011 1.2(7/3) ISO/IEC TR 19769:2004 1.2(10/2) ISO_646 subtype of Character in Ada.Characters.Handling A.3.2(9) ISO_646_Set in Ada.Strings.Maps.Constants A.4.6(4) 893 13 December 2012 Index K Key in Ada.Containers.Hashed_Maps Last in Ada.Containers.Doubly_Linked_- Lists A.18.3(35/2) in Ada.Containers.Ordered_Maps A.18.5(13/2) A.18.6(31/2) in Ada.Containers.Hashed_Sets in Ada.Containers.Ordered_Sets A.18.8(51/2) A.18.9(43/2) in Ada.Containers.Ordered_Maps in Ada.Containers.Vectors A.18.6(12/2) A.18.2(61/2) Ada Reference Manual — 2012 Edition issue an entry call 9.5.3(8) italics nongraphic characters 3.5.2(2/3) pseudo-names of anonymous types 3.2.1(7/2), A.1(2) syntax rules 1.1.4(14) terms introduced or defined 1.3(1/2) iterable container object 5.5.1(11/3) iterable container object for a loop 5.5.2(12/3) iterable container type 5.5.1(11/3), N(21.3/3) Iterate in Ada.Containers.Doubly_Linked_- Lists A.18.3(45/2) in Ada.Containers.Hashed_Maps in Ada.Containers.Ordered_Sets A.18.9(64/2) Kind in Ada.Directories A.16(25/2), A.16(40/2) known discriminants 3.7(26) known to be constrained 3.3(23.1/3) known to denote the same object A.18.5(37/2) 6.4.1(6.4/3) in Ada.Containers.Hashed_Sets known to refer to the same object A.18.8(49/2) 6.4.1(6.11/3) in Ada.Containers.Multiway_Trees A.18.10(42/3), A.18.10(44/3) in Ada.Containers.Ordered_Maps A.18.6(50/2) in Ada.Containers.Ordered_Sets A.18.9(60/2) in Ada.Containers.Vectors A.18.2(73/2) in Ada.Environment_Variables A.17(8/3) Iterate_Children in Ada.Containers.Multiway_Trees A.18.10(68/3), A.18.10(70/3) Iterate_Subtree in Ada.Containers.Multiway_Trees A.18.10(43/3), A.18.10(45/3) iteration cursor subtype 5.5.1(6/3) iteration_scheme 5.5(3/3) used 5.5(2), P iterator N(21.4/3) array component 5.5.2(3/3) container element 5.5.2(3/3) forward 5.5.2(4/3) generalized 5.5.2(3/3) reverse 5.5.2(4/3) iterator object 5.5.1(6/3) iterator type 5.5.1(6/3) Iterator_Element aspect 5.5.1(9/3) Iterator_Interfaces child of Ada 5.5.1(2/3) iterator_specification 5.5.2(2/3) used 4.5.8(1/3), 5.5(3/3), P J j in Ada.Numerics.Generic_Complex_- Types G.1.1(5) in Interfaces.Fortran B.5(10) known_discriminant_part 3.7(4) used 3.2.1(3/3), 3.7(2/2), 9.1(2/3), 9.4(2/3), P L label 5.1(7) used 5.1(2/3), 5.1(3), P Landau symbol O(X) A.18(3/2) language interface to assembly C.1(4/3) interface to non-Ada B(1) in Ada.Locales A.19(6/3) Language code standard 1.2(1.1/3) language-defined categories [partial] 3.2(10/2) language-defined category of types 3.2(2/2) language-defined check 11.5(2/3), 11.6(1/3) language-defined class [partial] 3.2(10/2) of types 3.2(2/2) Language-defined constants Q.5(1/3) Language-defined exceptions Q.4(1/3) Language-Defined Library Units A(1) Language-defined objects Q.5(1/3) Language-defined packages Q.1(1/3) Language-defined subprograms Q.3(1/3) Language-defined subtypes Q.2(1/3) Language-defined types Q.2(1/3) Language-defined values Q.5(1/3) Language_Code in Ada.Locales A.19(4/3) Language_Unknown in Ada.Locales A.19(5/3) in Ada.Iterator_Interfaces 5.5.1(4/3) Last attribute 3.5(13), 3.6.2(5) last element of a hashed set A.18.8(68/2) of a set A.18.7(6/2) of an ordered set A.18.9(81/3) last node of a hashed map A.18.5(46/2) of a map A.18.4(6/2) of an ordered map A.18.6(58/3) Last(N) attribute 3.6.2(6) last_bit 13.5.1(6) used 13.5.1(3), P Last_Bit attribute 13.5.2(4/2) Last_Child in Ada.Containers.Multiway_Trees A.18.10(62/3) Last_Child_Element in Ada.Containers.Multiway_Trees A.18.10(63/3) Last_Element in Ada.Containers.Doubly_Linked_- Lists A.18.3(36/2) in Ada.Containers.Ordered_Maps A.18.6(32/2) in Ada.Containers.Ordered_Sets A.18.9(44/2) in Ada.Containers.Vectors A.18.2(62/2) Last_Index in Ada.Containers.Vectors A.18.2(60/2) Last_Key in Ada.Containers.Ordered_Maps A.18.6(33/2) Last_Valid attribute 3.5.5(7.3/3) lateness D.9(12) Latin-1 3.5.2(2/3) Latin_1 child of Ada.Characters A.3.3(3) Layout aspect 13.5(1) Layout_Error in Ada.IO_Exceptions A.13(4) in Ada.Text_IO A.10.1(85) LC_A in Ada.Characters.Latin_1 A.3.3(13) LC_A_Acute in Ada.Characters.Latin_1 A.3.3(25) LC_A_Circumflex in Ada.Characters.Latin_1 A.3.3(25) Index 13 December 2012 894 Ada Reference Manual — 2012 Edition LC_A_Diaeresis in Ada.Characters.Latin_1 A.3.3(25) LC_A_Grave in Ada.Characters.Latin_1 A.3.3(25) LC_A_Ring in Ada.Characters.Latin_1 A.3.3(25) LC_A_Tilde in Ada.Characters.Latin_1 A.3.3(25) LC_AE_Diphthong in Ada.Characters.Latin_1 A.3.3(25) LC_B in Ada.Characters.Latin_1 A.3.3(13) LC_C in Ada.Characters.Latin_1 A.3.3(13) LC_C_Cedilla in Ada.Characters.Latin_1 A.3.3(25) LC_D in Ada.Characters.Latin_1 A.3.3(13) LC_E in Ada.Characters.Latin_1 A.3.3(13) LC_E_Acute in Ada.Characters.Latin_1 A.3.3(25) LC_E_Circumflex in Ada.Characters.Latin_1 A.3.3(25) LC_E_Diaeresis in Ada.Characters.Latin_1 A.3.3(25) LC_E_Grave in Ada.Characters.Latin_1 A.3.3(25) LC_F in Ada.Characters.Latin_1 A.3.3(13) LC_G in Ada.Characters.Latin_1 A.3.3(13) LC_German_Sharp_S in Ada.Characters.Latin_1 A.3.3(24) LC_H in Ada.Characters.Latin_1 A.3.3(13) LC_I in Ada.Characters.Latin_1 A.3.3(13) LC_I_Acute in Ada.Characters.Latin_1 A.3.3(25) LC_I_Circumflex in Ada.Characters.Latin_1 A.3.3(25) LC_I_Diaeresis in Ada.Characters.Latin_1 A.3.3(25) LC_I_Grave in Ada.Characters.Latin_1 A.3.3(25) LC_Icelandic_Eth in Ada.Characters.Latin_1 A.3.3(26) LC_Icelandic_Thorn in Ada.Characters.Latin_1 A.3.3(26) LC_J in Ada.Characters.Latin_1 A.3.3(13) LC_K in Ada.Characters.Latin_1 A.3.3(13) LC_L in Ada.Characters.Latin_1 A.3.3(13) LC_M in Ada.Characters.Latin_1 A.3.3(13) LC_N in Ada.Characters.Latin_1 A.3.3(13) LC_N_Tilde in Ada.Characters.Latin_1 A.3.3(26) LC_O in Ada.Characters.Latin_1 A.3.3(13) LC_O_Acute in Ada.Characters.Latin_1 A.3.3(26) LC_O_Circumflex in Ada.Characters.Latin_1 A.3.3(26) LC_O_Diaeresis in Ada.Characters.Latin_1 A.3.3(26) LC_O_Grave in Ada.Characters.Latin_1 A.3.3(26) LC_O_Oblique_Stroke in Ada.Characters.Latin_1 A.3.3(26) LC_O_Tilde in Ada.Characters.Latin_1 A.3.3(26) LC_P in Ada.Characters.Latin_1 A.3.3(14) LC_Q in Ada.Characters.Latin_1 A.3.3(14) LC_R in Ada.Characters.Latin_1 A.3.3(14) LC_S in Ada.Characters.Latin_1 A.3.3(14) LC_T in Ada.Characters.Latin_1 A.3.3(14) LC_U in Ada.Characters.Latin_1 A.3.3(14) LC_U_Acute in Ada.Characters.Latin_1 A.3.3(26) LC_U_Circumflex in Ada.Characters.Latin_1 A.3.3(26) LC_U_Diaeresis in Ada.Characters.Latin_1 A.3.3(26) LC_U_Grave in Ada.Characters.Latin_1 A.3.3(26) LC_V in Ada.Characters.Latin_1 A.3.3(14) LC_W in Ada.Characters.Latin_1 A.3.3(14) LC_X in Ada.Characters.Latin_1 A.3.3(14) LC_Y in Ada.Characters.Latin_1 A.3.3(14) LC_Y_Acute in Ada.Characters.Latin_1 A.3.3(26) LC_Y_Diaeresis in Ada.Characters.Latin_1 A.3.3(26) LC_Z in Ada.Characters.Latin_1 A.3.3(14) Leading_Nonseparate in Interfaces.COBOL B.4(23) Leading_Part attribute A.5.3(54) Leading_Separate in Interfaces.COBOL B.4(23) leaf node of a tree A.18.10(4/3) Leap_Seconds_Count subtype of Integer in Ada.Calendar.Arithmetic 9.6.1(11/2) leaving 7.6.1(3/2) left 7.6.1(3/2) left parenthesis 2.1(15/3) Left_Angle_Quotation in Ada.Characters.Latin_1 A.3.3(21/3) Left_Curly_Bracket in Ada.Characters.Latin_1 A.3.3(14) Left_Parenthesis in Ada.Characters.Latin_1 A.3.3(8) Left_Square_Bracket in Ada.Characters.Latin_1 A.3.3(12) legal construct 1.1.2(27) partition 1.1.2(29) legality rules 1.1.2(27) length of a dimension of an array 3.6(13) of a list container A.18.3(3/2) of a map A.18.4(5/2) of a one-dimensional array 3.6(13) of a set A.18.7(5/2) of a vector container A.18.2(2/2) in Ada.Containers.Doubly_Linked_- Lists A.18.3(11/2) in Ada.Containers.Hashed_Maps in Ada.Containers.Hashed_Sets in Ada.Containers.Ordered_Maps in Ada.Containers.Ordered_Sets A.18.5(10/2) A.18.8(12/2) A.18.6(9/2) A.18.9(11/2) A.18.2(21/2) in Ada.Containers.Vectors in Ada.Strings.Bounded A.4.4(9) in Ada.Strings.Unbounded A.4.5(6) in Ada.Text_IO.Editing F.3.3(11) in Interfaces.COBOL B.4(34), B.4(39), B.4(44) Length attribute 3.6.2(9) Length(N) attribute 3.6.2(10) Length_Check 11.5(15) [partial] 4.5.1(8), 4.6(37), 4.6(52) Length_Error in Ada.Strings A.4.1(5) Length_Range subtype of Natural in Ada.Strings.Bounded A.4.4(8) less than operator 4.4(1/3), 4.5.2(1) less than or equal operator 4.4(1/3), 4.5.2(1) less-than sign 2.1(15/3) Less_Case_Insensitive child of Ada.Strings A.4.10(13/3) child of Ada.Strings.Bounded child of Ada.Strings.Fixed A.4.10(18/3) A.4.10(16/3) child of Ada.Strings.Unbounded A.4.10(21/3) Less_Than_Sign in Ada.Characters.Latin_1 A.3.3(10) 895 13 December 2012 Index Ada Reference Manual — 2012 Edition letter a category of Character A.3.2(24) letter_lowercase 2.1(9/2) used 2.3(3/2), P letter_modifier 2.1(9.2/2) used 2.3(3/2), P letter_other 2.1(9.3/2) used 2.3(3/2), P Letter_Set in Ada.Strings.Maps.Constants A.4.6(4) letter_titlecase 2.1(9.1/2) used 2.3(3/2), P letter_uppercase 2.1(8/2) used 2.3(3/2), P level accessibility 3.10.2(3/2) library 3.10.2(22) lexical element 2.2(1) lexicographic order 4.5.2(26/3) LF in Ada.Characters.Latin_1 A.3.3(5) library 10.1.4(9) [partial] 10.1.1(9) informal introduction 10(2) See also library level, library unit, library_item library level 3.10.2(22) Library unit 10.1(3), 10.1.1(9), N(22) informal introduction 10(2) See also language-defined library units library unit pragma 10.1.5(7/3) All_Calls_Remote E.2.3(6) categorization pragmas E.2(2/3) Elaborate_Body 10.2.1(24) Preelaborate 10.2.1(4) Pure 10.2.1(15) library_item 10.1.1(4) informal introduction 10(2) used 10.1.1(3), P library_unit_body 10.1.1(7) used 10.1.1(4), P library_unit_declaration 10.1.1(5) used 10.1.1(4), P library_unit_renaming_declaration 10.1.1(6) used 10.1.1(4), P lifetime 3.10.2(3/2) limited interface 3.9.4(5/2) limited type 7.5(3/3), N(23/2) becoming nonlimited 7.3.1(5/1), 7.5(16) immutably 7.5(8.1/3) limited view 10.1.1(12.1/2) Limited_Controlled in Ada.Finalization 7.6(7/2) limited_with_clause 10.1.2(4.1/2) used 10.1.2(4/2), P line 2.2(2/3) in Ada.Text_IO A.10.1(38) line terminator A.10(7) Line_Length in Ada.Text_IO A.10.1(25) link name B.1(35) link-time error See post-compilation error 1.1.2(29) See post-compilation error 1.1.5(4) Link_Name aspect B.1(1/3) Linker_Options pragma B.1(8), L(19) linking See partition building 10.2(2) List in Ada.Containers.Doubly_Linked_- Lists A.18.3(6/3) list container A.18.3(1/2) List pragma 2.8(21), L(20) List_Iterator_Interfaces in Ada.Containers.Doubly_Linked_- Lists A.18.3(9.2/3) literal 4.2(1) based 2.4.2(1) decimal 2.4.1(1) numeric 2.4(1) See also aggregate 4.3(1) little endian 13.5.3(2) load time C.4(3) local to 8.1(14) local_name 13.1(3) used 13.3(2), 13.4(2), 13.5.1(2), 13.5.1(3), C.5(3), J.15.2(2/3), J.15.3(2/3), J.15.5(2/3), J.15.5(3/3), J.15.5(4/3), J.15.6(2/3), J.15.8(2/3), J.15.8(3/3), J.15.8(4/3), J.15.8(5/3), J.15.8(6/3), J.15.8(7/3), J.15.13(2/3), L(3.1/3), L(4.1/3), L(5.1/3), L(8.1/3), L(9), L(13.1/3), L(14.1/3), L(14.2/3), L(14.3/3), L(21.2/3), L(24.1/3), L(37.2/3), L(38.1/3), L(39.1/3), P locale A.19(1/3) active A.19(8/3) Locales child of Ada A.19(3/3) locking policy D.3(6/2) Ceiling_Locking D.3(7) Locking_Policy pragma D.3(3), L(21) Log in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(3) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(4) Logical in Interfaces.Fortran B.5(7) logical operator 4.5.1(2) See also not operator 4.5.6(3) logical_operator 4.5(2) long in Interfaces.C B.3(7) Long_Binary in Interfaces.COBOL B.4(10) long_double in Interfaces.C B.3(17) Long_Float 3.5.7(15), 3.5.7(16), 3.5.7(17) Long_Floating in Interfaces.COBOL B.4(9) Long_Integer 3.5.4(22), 3.5.4(25), 3.5.4(28) Look_Ahead in Ada.Text_IO A.10.1(43) loop cursor 5.5.2(12/3) loop iterator 5.5.2(10/3) container element iterator 5.5.2(12/3) loop parameter 5.5(6), 5.5.2(7/3) loop_parameter_specification 5.5(4) used 4.5.8(1/3), 5.5(3/3), P loop_statement 5.5(2) used 5.1(5/2), P low line 2.1(15/3) low-level programming C(1) Low_Line in Ada.Characters.Latin_1 A.3.3(12) Low_Order_First 13.5.3(2) in Interfaces.COBOL B.4(25) in System 13.7(15/2) lower bound of a range 3.5(4) lower-case letter a category of Character A.3.2(25) Lower_Case_Map in Ada.Strings.Maps.Constants A.4.6(5) Lower_Set in Ada.Strings.Maps.Constants A.4.6(4) M Machine attribute A.5.3(60) machine code insertion 13.8(1), C.1(2) machine numbers of a fixed point type 3.5.9(8/2) of a floating point type 3.5.7(8) machine scalar 13.3(8.1/3) Machine_Code child of System 13.8(7) Machine_Emax attribute A.5.3(8) Machine_Emin attribute A.5.3(7) Machine_Mantissa attribute A.5.3(6) Machine_Overflows attribute A.5.3(12), A.5.4(4) Machine_Radix aspect F.1(1) Machine_Radix attribute A.5.3(2), A.5.4(2) Machine_Radix clause 13.3(7/2), F.1(1) Machine_Rounding attribute A.5.3(41.1/2) Machine_Rounds attribute A.5.3(11), A.5.4(3) Index 13 December 2012 896 Ada Reference Manual — 2012 Edition macro See generic unit 12(1) Macron in Ada.Characters.Latin_1 A.3.3(21/3) main subprogram for a partition 10.2(7) malloc See allocator 4.8(1) Map in Ada.Containers.Hashed_Maps A.18.5(3/3) in Ada.Containers.Ordered_Maps A.18.6(4/3) map container A.18.4(1/2) Map_Iterator_Interfaces in Ada.Containers.Hashed_Maps A.18.5(6.2/3) in Ada.Containers.Ordered_Maps A.18.6(7.2/3) Maps child of Ada.Strings A.4.2(3/2) mark_non_spacing 2.1(9.4/2), 2.1(9.5/2) used 2.3(3.1/3), P mark_spacing_combining used 2.3(3.1/3), P marshalling E.4(9) Masculine_Ordinal_Indicator in Ada.Characters.Latin_1 A.3.3(22) master 7.6.1(3/2) master of a call 3.10.2(10.1/3) match a character to a pattern character A.4.2(54) a character to a pattern character, with respect to a character mapping function A.4.2(64) a string to a pattern string A.4.2(54) matching components 4.5.2(16) Max attribute 3.5(19) Max_Alignment_For_Allocation attribute 13.11.1(4/3) Max_Asynchronous_Select_Nesting restriction D.7(18/1) Max_Base_Digits 3.5.7(6) in System 13.7(8) Max_Binary_Modulus 3.5.4(7) in System 13.7(7) Max_Decimal_Digits in Ada.Decimal F.2(5) Max_Delta in Ada.Decimal F.2(4) Max_Digits 3.5.7(6) in System 13.7(8) Max_Digits_Binary in Interfaces.COBOL B.4(11) Max_Digits_Long_Binary in Interfaces.COBOL B.4(11) Max_Entry_Queue_Length restriction D.7(19.1/2) Max_Image_Width in Ada.Numerics.Discrete_Random A.5.2(25) in Ada.Numerics.Float_Random A.5.2(13) Max_Int 3.5.4(14) in System 13.7(6) Max_Length in Ada.Strings.Bounded A.4.4(5) Max_Mantissa in System 13.7(9) Max_Nonbinary_Modulus 3.5.4(7) in System 13.7(7) Max_Picture_Length in Ada.Text_IO.Editing F.3.3(8) Max_Protected_Entries restriction D.7(14) Max_Scale in Ada.Decimal F.2(3) Max_Select_Alternatives restriction D.7(12) Max_Size_In_Storage_Elements attribute 13.11.1(3/3) Max_Storage_At_Blocking restriction D.7(17/1) Max_Task_Entries restriction D.7(13) Max_Tasks restriction D.7(19/1) maximum box error for a component of the result of evaluating a complex function G.2.6(3) maximum line length A.10(11) maximum page length A.10(11) maximum relative error for a component of the result of evaluating a complex function G.2.6(3) for the evaluation of an elementary function G.2.4(2) Members in Ada.Execution_Time.Group_Budgets D.14.2(8/2) Membership in Ada.Strings A.4.1(6) membership test 4.5.2(2/3) membership_choice 4.4(3.2/3) used 4.4(3.1/3), P membership_choice_list 4.4(3.1/3) used 4.4(3/3), P Memory_Size in System 13.7(13) mentioned in a with_clause 10.1.2(6/2) Merge in Ada.Containers.Doubly_Linked_- Lists A.18.3(50/2) in Ada.Containers.Vectors A.18.2(78/2) message See dispatching call 3.9.2(1/2) method See dispatching subprogram 3.9.2(1/2) metrics 1.1.2(35) Micro_Sign in Ada.Characters.Latin_1 A.3.3(22) Microseconds in Ada.Real_Time D.8(14/2) Middle_Dot in Ada.Characters.Latin_1 A.3.3(22) Milliseconds in Ada.Real_Time D.8(14/2) Min attribute 3.5(16) Min_Delta in Ada.Decimal F.2(4) Min_Handler_Ceiling in Ada.Execution_Time.Group_Budgets D.14.2(7/2) in Ada.Execution_Time.Timers D.14.1(6/2) Min_Int 3.5.4(14) in System 13.7(6) Min_Scale in Ada.Decimal F.2(3) minus 2.1(15/3) minus operator 4.4(1/3), 4.5.3(1), 4.5.4(1) Minus_Sign in Ada.Characters.Latin_1 A.3.3(8) Minute in Ada.Calendar.Formatting 9.6.1(25/2) Minute_Number subtype of Natural in Ada.Calendar.Formatting 9.6.1(20/2) Minutes in Ada.Real_Time D.8(14/2) mixed-language programs B(1), C.1(4/3) Mod attribute 3.5.4(16.1/2) mod operator 4.4(1/3), 4.5.5(1) mod_clause J.8(1) used 13.5.1(2), P mode 6.1(16) used 6.1(15/3), 12.4(2/3), P in Ada.Direct_IO A.8.4(9) in Ada.Sequential_IO A.8.1(9) in Ada.Streams.Stream_IO A.12.1(11) in Ada.Text_IO A.10.1(12) mode conformance 6.3.1(16/3) required 8.5.4(4/3), 8.5.4(5/3), 12.6(7/3), 12.6(8/3), 13.3(6) mode of operation nonstandard 1.1.5(11) standard 1.1.5(11) Mode_Error in Ada.Direct_IO A.8.4(18) in Ada.IO_Exceptions A.13(4) in Ada.Sequential_IO A.8.1(15) 897 13 December 2012 Index Ada Reference Manual — 2012 Edition in Ada.Streams.Stream_IO A.12.1(26) in Ada.Text_IO A.10.1(85) Model attribute A.5.3(68), G.2.2(7) model interval G.2.1(4) associated with a value G.2.1(4) model number G.2.1(3) model-oriented attributes of a floating point subtype A.5.3(63) Model_Emin attribute A.5.3(65), G.2.2(4) Model_Epsilon attribute A.5.3(66) Model_Mantissa attribute A.5.3(64), G.2.2(3/2) Model_Small attribute A.5.3(67) Modification_Time in Ada.Directories A.16(27/2), A.16(42/2) modular type 3.5.4(1) Modular_IO in Ada.Text_IO A.10.1(57) modular_type_definition 3.5.4(4) used 3.5.4(2), P module See package 7(1) modulus of a modular type 3.5.4(7) in Ada.Numerics.Generic_Complex_- Arrays G.3.2(10/2), G.3.2(30/2) in Ada.Numerics.Generic_Complex_- Types G.1.1(9) Modulus attribute 3.5.4(17) Monday in Ada.Calendar.Formatting 9.6.1(17/2) Month in Ada.Calendar 9.6(13) in Ada.Calendar.Formatting 9.6.1(22/2) Month_Number subtype of Integer in Ada.Calendar 9.6(11/2) More_Entries in Ada.Directories A.16(34/2) Move in Ada.Containers.Doubly_Linked_- Lists A.18.3(18/2) in Ada.Containers.Hashed_Maps A.18.5(18/2) in Ada.Containers.Hashed_Sets A.18.8(18/2) in Ada.Containers.Indefinite_Holders A.18.18(22/3) in Ada.Containers.Multiway_Trees A.18.10(34/3) in Ada.Containers.Ordered_Maps A.18.6(17/2) in Ada.Containers.Ordered_Sets A.18.9(17/2) in Ada.Containers.Vectors A.18.2(35/2) in Ada.Strings.Fixed A.4.3(7) multi-dimensional array 3.6(12) Multiplication_Sign in Ada.Characters.Latin_1 A.3.3(24) multiply 2.1(15/3) multiply operator 4.4(1/3), 4.5.5(1) multiplying operator 4.5.5(1) multiplying_operator 4.5(6) used 4.4(5), P Multiprocessors child of System D.16(3/3) Multiway_Trees child of Ada.Containers A.18.10(7/3) mutates 7.6(17.6/3) MW in Ada.Characters.Latin_1 A.3.3(18) N n-dimensional array_aggregate 4.3.3(6) NAK in Ada.Characters.Latin_1 A.3.3(6) name 4.1(2/3) [partial] 3.1(1) of (a view of) an entity 3.1(8) of a pragma 2.8(9) of an external file A.7(1) used 2.8(3/3), 3.2.2(4), 4.1(4), 4.1(5), 4.1(6), 4.1.5(4/3), 4.4(7/3), 4.6(2), 4.8(2.1/3), 5.2(2), 5.5.2(2/3), 5.7(2), 5.8(2), 6.4(2), 6.4(3), 6.4(6), 8.4(3), 8.5.1(2/3), 8.5.2(2/3), 8.5.3(2/3), 8.5.4(2/3), 8.5.5(2/3), 9.5.3(2), 9.5.4(2/3), 9.8(2), 10.1.1(8), 10.1.2(4.1/2), 10.1.2(4.2/2), 10.2.1(3), 10.2.1(14), 10.2.1(20), 10.2.1(21), 10.2.1(22), 11.2(5), 11.3(2/2), 12.3(2/3), 12.3(5), 12.6(4), 12.7(2/3), 13.1(3), 13.1.1(4/3), 13.3(2), 13.11.3(3.1/3), 13.12(4.1/2), E.2.1(3), E.2.2(3), E.2.3(3), E.2.3(5), H.3.2(3), J.10(3/2), J.15.1(2/3), J.15.7(2/3), J.15.7(4/3), L(2), L(6.1/3), L(10), L(11), L(12), L(15.1/3), L(16), L(17.1/3), L(26), L(28), L(30), L(31), L(34), P in Ada.Direct_IO A.8.4(9) in Ada.Sequential_IO A.8.1(9) in Ada.Streams.Stream_IO A.12.1(11) in Ada.Text_IO A.10.1(12) in System 13.7(4) name resolution rules 1.1.2(26/3) Name_Case_Equivalence in Ada.Directories A.16(20.2/3) Name_Case_Kind in Ada.Directories A.16(20.1/3) Name_Error in Ada.Direct_IO A.8.4(18) in Ada.Directories A.16(43/2) in Ada.IO_Exceptions A.13(4) in Ada.Sequential_IO A.8.1(15) in Ada.Streams.Stream_IO A.12.1(26) in Ada.Text_IO A.10.1(85) named in a use clause 8.4(7.1/2) in a with_clause 10.1.2(6/2) named association 6.4(7), 6.4.1(2/3), 12.3(6) named component association 4.3.1(6) named discriminant association 3.7.1(4) named entry index 9.5.2(21) named number 3.3(24) named parameter association 6.4.1(2/3) named type 3.2.1(7/2) named_array_aggregate 4.3.3(4) used 4.3.3(2), P Names child of Ada.Interrupts C.3.2(12) Nanoseconds in Ada.Real_Time D.8(14/2) Native_Binary in Interfaces.COBOL B.4(25) Natural 3.5.4(12) Natural subtype of Integer in Standard A.1(13) NBH in Ada.Characters.Latin_1 A.3.3(17) NBSP in Ada.Characters.Latin_1 A.3.3(21/3) needed of a compilation unit by another 10.2(2) remote call interface E.2.3(18) shared passive library unit E.2.1(11) needed component extension_aggregate record_component_association_list 4.3.2(6) record_aggregate record_component_association_list 4.3.1(9) needs finalization 7.6(9.1/2) language-defined type A.4.5(72.1/2), A.5.2(15.1/2), A.5.2(27.1/2), A.8.1(17/2), A.8.4(20/2), A.10.1(86/2), A.12.1(27.1/2), A.16(102/2), A.18.2(147.3/3), A.18.2(84/2), A.18.3(56/2), A.18.3(86.3/3), A.18.4(4/2), A.18.4(41.3/3), A.18.7(4/2), A.18.7(36.2/3), A.18.7(96.2/3), A.18.10(124/3), A.18.10(73/3), A.18.18(27/3), A.18.18(54/3), D.14.2(13/2), D.15(8/2) NEL in Ada.Characters.Latin_1 A.3.3(17) new See allocator 4.8(1) New_Char_Array in Interfaces.C.Strings B.3.1(9) Index 13 December 2012 898 New_Line in Ada.Text_IO A.10.1(28) New_Page in Ada.Text_IO A.10.1(31) New_String in Interfaces.C.Strings B.3.1(10) Next in Ada.Containers.Doubly_Linked_- Lists A.18.3(37/2), A.18.3(39/2) in Ada.Containers.Hashed_Maps A.18.5(28/2), A.18.5(29/2) in Ada.Containers.Hashed_Sets A.18.8(41/2), A.18.8(42/2) in Ada.Containers.Ordered_Maps A.18.6(34/2), A.18.6(35/2) in Ada.Containers.Ordered_Sets A.18.9(45/2), A.18.9(46/2) in Ada.Containers.Vectors A.18.2(63/2), A.18.2(64/2) in Ada.Iterator_Interfaces 5.5.1(3/3) Next_Sibling in Ada.Containers.Multiway_Trees A.18.10(64/3), A.18.10(66/3) No_Abort_Statements restriction D.7(5/3) No_Access_Parameter_Allocators restriction H.4(8.3/3) No_Access_Subprograms restriction H.4(17) No_Allocators restriction H.4(7) No_Anonymous_Allocators restriction H.4(8.1/3) No_Break_Space in Ada.Characters.Latin_1 A.3.3(21/3) No_Coextensions restriction H.4(8.2/3) No_Delay restriction H.4(21) No_Dependence restriction 13.12.1(6/2) No_Dispatch restriction H.4(19) No_Dynamic_Attachment restriction D.7(10/3) No_Dynamic_Priorities restriction D.7(9/2) No_Element in Ada.Containers.Doubly_Linked_- Lists A.18.3(9/2) in Ada.Containers.Hashed_Maps A.18.5(6/2) in Ada.Containers.Hashed_Sets Ada Reference Manual — 2012 Edition No_Implementation_Aspect_Specification s restriction 13.12.1(1.1/3) No_Implementation_Attributes restriction 13.12.1(2/2) No_Implementation_Identifiers restriction 13.12.1(2.1/3) No_Implementation_Pragmas restriction of a tree A.18.10(2/3) Node_Count in Ada.Containers.Multiway_Trees A.18.10(17/3) nominal subtype 3.3(23/3), 3.3.1(8/2) associated with a dereference 4.1(9/3) associated with a type_conversion 13.12.1(3/2) 4.6(27) No_Implementation_Units restriction associated with an indexed_component 13.12.1(3.1/3) No_Implicit_Heap_Allocations restriction D.7(8) No_Index in Ada.Containers.Vectors A.18.2(7/2) No_IO restriction H.4(20/2) No_Local_Allocators restriction H.4(8/1) No_Local_Protected_Objects restriction D.7(10.1/3) No_Local_Timing_Events restriction D.7(10.2/3) 4.1.1(5) of a component 3.6(20) of a formal parameter 6.1(23/2) of a function result 6.1(23/2) of a generic formal object 12.4(9/2) of a record component 3.8(14) of the result of a function_call 6.4(12/2) Non_Preemptive child of Ada.Dispatching D.2.4(2.2/3) Non_Preemptive_FIFO_Within_Priorities No_Nested_Finalization restriction task disp. policy D.2.4(2/2) D.7(4/3) No_Obsolescent_Features restriction 13.12.1(4/3) No_Protected_Type_Allocators restriction D.7(10.3/2) No_Protected_Types restriction H.4(5) No_Recursion restriction H.4(22) No_Reentrancy restriction H.4(23) No_Relative_Delay restriction D.7(10.5/3) No_Requeue_Statements restriction nonconfirming aspect specification 13.1(18.2/3) representation item 13.1(18.2/3) representation value 13.1(18.2/3) nondispatching call on a dispatching operation 3.9.2(1/2) nonexistent 13.11.2(10/2), 13.11.2(16/3) nongraphic character 3.5(27.5/2) nonlimited interface 3.9.4(5/2) nonlimited type 7.5(7) becoming nonlimited 7.3.1(5/1), D.7(10.6/3) 7.5(16) No_Return aspect 6.5.1(3.2/3) No_Return pragma J.15.2(2/3), L(21.2/3) No_Select_Statements restriction D.7(10.7/3) No_Specific_Termination_Handlers restriction D.7(10.8/3) No_Specification_of_Aspect restriction 13.12.1(6.1/3) No_Standard_Allocators_After_Elaborati on restriction D.7(19.2/3) No_Tag in Ada.Tags 3.9(6.1/2) No_Task_Allocators restriction D.7(7) No_Task_Hierarchy restriction D.7(3/3) No_Task_Termination restriction nonlimited_with_clause 10.1.2(4.2/2) used 10.1.2(4/2), P nonnormative See informative 1.1.2(18) nonreturning 6.5.1(3.2/3) nonstandard integer type 3.5.4(26) nonstandard mode 1.1.5(11) nonstandard real type 3.5.6(8) normal completion 7.6.1(2/2) normal library unit E.2(4/3) normal state of an object 11.6(6/3), 13.9.1(4) [partial] 9.8(21), A.13(17) Normalize_Scalars pragma H.1(3), L(22) normalized exponent A.5.3(14) normalized number A.5.3(10) normative 1.1.2(14) not equal operator 4.4(1/3), 4.5.2(1) not in (membership test) 4.4(1/3), A.18.8(6/2) D.7(15.1/2) in Ada.Containers.Multiway_Trees No_Terminate_Alternatives restriction A.18.10(11/3) D.7(6) in Ada.Containers.Ordered_Maps No_Unchecked_Access restriction A.18.6(7/2) H.4(18) 4.5.2(2/3) in Ada.Containers.Ordered_Sets No_Use_Of_Attribute restriction A.18.9(7/2) 13.12.1(6.2/3) in Ada.Containers.Vectors No_Use_Of_Pragma restriction A.18.2(11/2) 13.12.1(6.3/3) No_Exceptions restriction H.4(12) No_Fixed_Point restriction H.4(15) No_Floating_Point restriction H.4(14) node of a list A.18.3(2/2) of a map A.18.4(5/2) not operator 4.4(1/3), 4.5.6(3) Not_A_Specific_CPU in System.Multiprocessors D.16(4/3) Not_Sign in Ada.Characters.Latin_1 A.3.3(21/3) notes 1.1.2(38) 899 13 December 2012 Index Ada Reference Manual — 2012 Edition notwithstanding 7.6(17.5/3), 10.1.6(6/2), B.1(22/3), B.1(38/3), C.3.1(19/3), E.2.1(8), E.2.1(11), E.2.3(18), H.6(7/2), J.3(6) [partial] J.15.5(8/3) NUL in Ada.Characters.Latin_1 A.3.3(5) in Interfaces.C B.3(20/1) null access value 4.2(9) null array 3.6.1(7) null constraint 3.2(7/2) null extension 3.9.1(4.1/2) null pointer See null access value 4.2(9) null procedure 6.7(3/3) null range 3.5(4) null record 3.8(15) null slice 4.1.2(7) null string literal 2.6(6) null value of an access type 3.10(13/2) Null_Address in System 13.7(12) Null_Bounded_String in Ada.Strings.Bounded A.4.4(7) null_exclusion 3.10(5.1/2) used 3.2.2(3/2), 3.7(5/2), 3.10(2/2), 3.10(6/2), 6.1(13/2), 6.1(15/3), 8.5.1(2/3), 12.4(2/3), P Null_Id in Ada.Exceptions 11.4.1(2/2) Null_Occurrence in Ada.Exceptions 11.4.1(3/2) null_procedure_declaration 6.7(2/3) used 3.1(3/3), P Null_Ptr in Interfaces.C.Strings B.3.1(7) Null_Set in Ada.Strings.Maps A.4.2(5) in Ada.Strings.Wide_Maps A.4.7(5) in Ada.Strings.Wide_Wide_Maps A.4.8(5/2) null_statement 5.1(6) used 5.1(4/2), P Null_Task_Id in Ada.Task_Identification C.7.1(2/2) Null_Unbounded_String in Ada.Strings.Unbounded A.4.5(5) number sign 2.1(15/3) Number_Base subtype of Integer in Ada.Text_IO A.10.1(6) number_decimal 2.1(10/2) used 2.3(3.1/3), P number_declaration 3.3.2(2) used 3.1(3/3), P number_letter 2.1(10.1/2) used 2.3(3/2), P Number_Of_CPUs in System.Multiprocessors D.16(5/3) Number_Sign in Ada.Characters.Latin_1 A.3.3(8) numeral 2.4.1(3) used 2.4.1(2), 2.4.1(4), 2.4.2(3), P Numeric in Interfaces.COBOL B.4(20/3) numeric type 3.5(1) numeric_literal 2.4(2) used 4.4(7/3), P numerics G(1) child of Ada A.5(3/2) O O(f(N)) A.18(3/2) object 3.3(2), N(24) [partial] 3.2(1) object-oriented programming (OOP) See dispatching operations of tagged types 3.9.2(1/2) See tagged types and type extensions 3.9(1) object_declaration 3.3.1(2/3) used 3.1(3/3), P object_renaming_declaration 8.5.1(2/3) used 8.5(2), P obsolescent feature J(1/2) occur immediately within 8.1(13) occurrence of an interrupt C.3(2) octal literal 2.4.2(1) octal literal 2.4.2(1) Old attribute 6.1.1(26/3) one's complement modular types 3.5.4(27) one-dimensional array 3.6(12) only as a completion entry_body 9.5.2(16) OOP (object-oriented programming) See dispatching operations of tagged types 3.9.2(1/2) See tagged types and type extensions 3.9(1) opaque type See private types and private extensions 7.3(1) Open in Ada.Direct_IO A.8.4(7) in Ada.Sequential_IO A.8.1(7) in Ada.Streams.Stream_IO A.12.1(9) in Ada.Text_IO A.10.1(10) open alternative 9.7.1(14) open entry 9.5.3(5) of a protected object 9.5.3(7/3) of a task 9.5.3(6/3) operand of a qualified_expression 4.7(3) of a type_conversion 4.6(3) operand interval G.2.1(6) operand type of a type_conversion 4.6(3) operates on a type 3.2.3(1/2) operational aspect 13.1(8.1/3) specifiable attributes 13.3(5/3) operational item 13.1(1.1/1) operator 6.6(1) & 4.4(1/3), 4.5.3(3) * 4.4(1/3), 4.5.5(1) ** 4.4(1/3), 4.5.6(7) + 4.4(1/3), 4.5.3(1), 4.5.4(1) - 4.4(1/3), 4.5.3(1), 4.5.4(1) / 4.4(1/3), 4.5.5(1) /= 4.4(1/3), 4.5.2(1) < 4.4(1/3), 4.5.2(1) <= 4.4(1/3), 4.5.2(1) = 4.4(1/3), 4.5.2(1) > 4.4(1/3), 4.5.2(1) >= 4.4(1/3), 4.5.2(1) abs 4.4(1/3), 4.5.6(1) ampersand 4.4(1/3), 4.5.3(3) and 4.4(1/3), 4.5.1(2) binary 4.5(9) binary adding 4.5.3(1) concatenation 4.4(1/3), 4.5.3(3) divide 4.4(1/3), 4.5.5(1) equal 4.4(1/3), 4.5.2(1) equality 4.5.2(1) exponentiation 4.4(1/3), 4.5.6(7) greater than 4.4(1/3), 4.5.2(1) greater than or equal 4.4(1/3), 4.5.2(1) highest precedence 4.5.6(1) less than 4.4(1/3), 4.5.2(1) less than or equal 4.4(1/3), 4.5.2(1) logical 4.5.1(2) minus 4.4(1/3), 4.5.3(1), 4.5.4(1) mod 4.4(1/3), 4.5.5(1) multiply 4.4(1/3), 4.5.5(1) multiplying 4.5.5(1) not 4.4(1/3), 4.5.6(3) not equal 4.4(1/3), 4.5.2(1) or 4.4(1/3), 4.5.1(2) ordering 4.5.2(1) plus 4.4(1/3), 4.5.3(1), 4.5.4(1) predefined 4.5(9) relational 4.5.2(1) rem 4.4(1/3), 4.5.5(1) times 4.4(1/3), 4.5.5(1) unary 4.5(9) unary adding 4.5.4(1) user-defined 6.6(1) xor 4.4(1/3), 4.5.1(2) operator precedence 4.5(1) operator_symbol 6.1(9) used 4.1(3), 4.1.3(3), 6.1(5), 6.1(11), P optimization 11.5(29), 11.6(1/3) Optimize pragma 2.8(23), L(23) or else (short-circuit control form) 4.4(1/3), 4.5.1(1) or operator 4.4(1/3), 4.5.1(2) Index 13 December 2012 900 Ada Reference Manual — 2012 Edition Ordered_Maps child of Ada.Containers A.18.6(2/3) Ordered_Sets child of Ada.Containers A.18.9(2/3) ordering operator 4.5.2(1) ordinary file A.16(45/2) ordinary fixed point type 3.5.9(1), 3.5.9(8/2) package instance 12.3(13) package_body 7.2(2/3) used 3.11(6), 10.1.1(7), P package_body_stub 10.1.3(4) used 10.1.3(2), P package_declaration 7.1(2) used 3.1(3/3), 10.1.1(5), P package_renaming_declaration ordinary_fixed_point_definition 3.5.9(3) used 3.5.9(2), P OSC in Ada.Characters.Latin_1 A.3.3(19) other_control 2.1(13.1/2) other_format 2.1(10.3/2) other_private_use 2.1(13.2/2) other_surrogate 2.1(13.3/2) output A.6(1/2) Output aspect 13.13.2(38/3) Output attribute 13.13.2(19), 13.13.2(29) Output clause 13.3(7/2), 13.13.2(38/3) overall interpretation of a complete context 8.6(10) Overflow_Check 11.5(16) [partial] 3.5.4(20), 4.4(11), 4.5.7(21/3), 5.4(13), G.2.1(11), G.2.2(7), G.2.3(25), G.2.4(2), G.2.6(3) Overlap in Ada.Containers.Hashed_Sets A.18.8(38/2) in Ada.Containers.Ordered_Sets A.18.9(39/2) Overlaps_Storage attribute 13.3(73.6/3) overload resolution 8.6(1/3) overloadable 8.3(7) overloaded 8.3(6) enumeration literal 3.5.1(9) overloading rules 1.1.2(26/3), 8.6(2) overridable 8.3(9/1) override 8.3(9/1), 12.3(17) a primitive subprogram 3.2.3(7/2) when implemented by 9.1(9.2/3), 9.4(11.1/3) overriding operation N(24.1/2) overriding_indicator 8.3.1(2/2) used 3.9.3(1.1/3), 6.1(2/3), 6.3(2/3), 6.7(2/3), 6.8(2/3), 8.5.4(2/3), 9.5.2(2/3), 10.1.3(3/3), 12.3(2/3), P Overwrite in Ada.Strings.Bounded A.4.4(62), A.4.4(63) in Ada.Strings.Fixed A.4.3(27), A.4.3(28) in Ada.Strings.Unbounded A.4.5(57), A.4.5(58) P 8.5.3(2/3) used 8.5(2), 10.1.1(6), P package_specification 7.1(3/3) used 7.1(2), 12.1(4), P packed 13.2(5.1/3) Packed_Decimal in Interfaces.COBOL B.4(12/3) Packed_Format in Interfaces.COBOL B.4(26) Packed_Signed in Interfaces.COBOL B.4(27) Packed_Unsigned in Interfaces.COBOL B.4(27) padding bits 13.1(7/2) Page in Ada.Text_IO A.10.1(39) Page pragma 2.8(22), L(25) page terminator A.10(7) Page_Length in Ada.Text_IO A.10.1(26) Paragraph_Sign in Ada.Characters.Latin_1 A.3.3(22) parallel processing See task 9(1/3) parameter explicitly aliased 6.1(23.1/3) See formal parameter 6.1(17) See generic formal parameter 12(1) See also discriminant 3.7(1/2) See also loop parameter 5.5(6) parameter assigning back 6.4.1(17) parameter copy back 6.4.1(17) parameter mode 6.1(18/3) parameter passing 6.4.1(1) parameter_and_result_profile 6.1(13/2) used 3.10(5), 3.10(6/2), 6.1(4.2/2), P parameter_association 6.4(5) used 6.4(4), P parameter_profile 6.1(12) used 3.10(5), 3.10(6/2), 6.1(4.1/2), 9.5.2(2/3), 9.5.2(3), 9.5.2(6), P parameter_specification 6.1(15/3) used 6.1(14), P Parameterless_Handler in Ada.Interrupts C.3.2(2/3) Params_Stream_Type in System.RPC E.5(6) parent N(25.1/2) in Ada.Containers.Multiway_Trees Pack aspect 13.2(5.1/3) Pack pragma J.15.3(2/3), L(24.1/3) Package 7(1), N(25) A.18.10(59/3) parent body of a subunit 10.1.3(8/2) parent declaration of a library unit 10.1.1(10) of a library_item 10.1.1(10) parent subtype 3.4(3/2) parent type 3.4(3/2) parent unit of a library unit 10.1.1(10) Parent_Tag in Ada.Tags 3.9(7.2/2) parent_unit_name 10.1.1(8) used 6.1(5), 6.1(7), 7.1(3/3), 7.2(2/3), 10.1.3(7), P part of a type 3.2(6/2) of an object or value 3.2(6/2) partial view of a type 7.3(4) partition 10.2(2), N(26) partition building 10.2(2) partition communication subsystem (PCS) E.5(1/2) Partition_Check [partial] E.4(19) Partition_Elaboration_Policy pragma H.6(3/2), L(25.1/2) Partition_Id in System.RPC E.5(4) Partition_Id attribute E.1(9) pass by copy 6.2(2) pass by reference 6.2(2) passive partition E.1(2) Pattern_Error in Ada.Strings A.4.1(5) PCS (partition communication subsystem) E.5(1/2) Peak_Use in Ada.Containers.Bounded_Priority_Qu eues A.18.31(7/3) in Ada.Containers.Bounded_Synchronize d_Queues A.18.29(6/3) in Ada.Containers.Synchronized_Queue_ Interfaces A.18.27(7/3) in Ada.Containers.Unbounded_Priority_ Queues A.18.30(7/3) in Ada.Containers.Unbounded_Synchron ized_Queues A.18.28(6/3) pending interrupt occurrence C.3(2) per-object constraint 3.8(18/2) per-object expression 3.8(18/2) percent sign 2.1(15/3) Percent_Sign in Ada.Characters.Latin_1 A.3.3(8) perfect result set G.2.3(5) 901 13 December 2012 Index Ada Reference Manual — 2012 Edition periodic task example 9.6(39) See delay_until_statement 9.6(39) Pi in Ada.Numerics A.5(3/2) Pic_String in Ada.Text_IO.Editing F.3.3(7) Picture in Ada.Text_IO.Editing F.3.3(4) picture String for edited output F.3.1(1/3) Picture_Error in Ada.Text_IO.Editing F.3.3(9) Pilcrow_Sign in Ada.Characters.Latin_1 A.3.3(22) plain_char in Interfaces.C B.3(11) plane character 2.1(1/3) PLD in Ada.Characters.Latin_1 A.3.3(17) PLU in Ada.Characters.Latin_1 A.3.3(17) plus operator 4.4(1/3), 4.5.3(1), 4.5.4(1) plus sign 2.1(15/3) Plus_Minus_Sign in Ada.Characters.Latin_1 A.3.3(22) Plus_Sign in Ada.Characters.Latin_1 A.3.3(8) PM in Ada.Characters.Latin_1 A.3.3(19) point 2.1(15/3) Pointer in Interfaces.C.Pointers B.3.2(5) See access value 3.10(1) See type System.Address 13.7(34/2) pointer type See access type 3.10(1) Pointer_Error in Interfaces.C.Pointers B.3.2(8) Pointers child of Interfaces.C B.3.2(4) polymorphism 3.9(1), 3.9.2(1/2) pool default 13.11.3(4.1/3) subpool 13.11.4(18/3) pool element 3.10(7/1), 13.11(11) pool type 13.11(11) pool-specific access type 3.10(7/1), 3.10(8) Pool_of_Subpool in System.Storage_Pools.Subpools 13.11.4(9/3) Pos attribute 3.5.5(2) position 13.5.1(4) used 13.5.1(3), P Position attribute 13.5.2(2/2) position number 3.5(1) of an enumeration value 3.5.1(7) of an integer value 3.5.4(15) positional association 6.4(7), 6.4.1(2/3), 12.3(6) positional component association 4.3.1(6) positional discriminant association 3.7.1(4) positional parameter association 6.4.1(2/3) positional_array_aggregate 4.3.3(3/2) used 4.3.3(2), P Positive 3.5.4(12) Positive subtype of Integer in Standard A.1(13) Positive_Count subtype of Count in Ada.Direct_IO A.8.4(4) in Ada.Streams.Stream_IO A.12.1(7) in Ada.Text_IO A.10.1(5) possible interpretation 8.6(14) for direct_names 8.3(24) for selector_names 8.3(24) Post aspect 6.1.1(4/3) Post'Class aspect 6.1.1(5/3) post-compilation error 1.1.2(29) post-compilation rules 1.1.2(29) postcondition N(26.1/3) postcondition check 6.1.1(35/3) postcondition expression class-wide 6.1.1(5/3) specific 6.1.1(4/3) potentially blocking operation 9.5.1(8) Abort_Task C.7.1(16) delay_statement 9.6(34), D.9(5) remote subprogram call E.4(17) RPC operations E.5(23) Suspend_Until_True D.10(10) potentially unevaluated expression 6.1.1(20/3) potentially use-visible 8.4(8/3) [partial] 12.6(9.2/3) Pound_Sign in Ada.Characters.Latin_1 A.3.3(21/3) Pragma 2.8(1), 2.8(2), L(1), N(27) pragma argument 2.8(9) pragma name 2.8(9) pragma, categorization E.2(2/3) Remote_Call_Interface E.2.3(2) Remote_Types E.2.2(2) Shared_Passive E.2.1(2) pragma, configuration 10.1.5(8) Assertion_Policy 11.4.2(7/3) Detect_Blocking H.5(4/2) Discard_Names C.5(4) Locking_Policy D.3(5) Normalize_Scalars H.1(4) Partition_Elaboration_Policy H.6(5/2) Priority_Specific_Dispatching D.2.2(5/2) Profile 13.12(14/3) Queuing_Policy D.4(5) Restrictions 13.12(8/3) Reviewable H.3.1(4) Suppress 11.5(5/2) Task_Dispatching_Policy D.2.2(5/2) Unsuppress 11.5(5/2) pragma, identifier specific to 2.8(10/3) pragma, interfacing Convention J.15.5(1/3) Export J.15.5(1/3) Import J.15.5(1/3) pragma, library unit 10.1.5(7/3) All_Calls_Remote E.2.3(6) categorization pragmas E.2(2/3) Elaborate_Body 10.2.1(24) Preelaborate 10.2.1(4) Pure 10.2.1(15) pragma, program unit 10.1.5(2) Inline J.15.1(1/3) library unit pragmas 10.1.5(7/3) pragma, representation 13.1(1/1) Asynchronous J.15.13(1/3) Atomic J.15.8(9/3) Atomic_Components J.15.8(9/3) Convention J.15.5(1/3) Discard_Names C.5(6) Export J.15.5(1/3) Import J.15.5(1/3) Independent J.15.8(9/3) Independent_Components J.15.8(9/3) No_Return J.15.2(1/3) Pack J.15.3(1/3) Unchecked_Union J.15.6(1/3) Volatile J.15.8(9/3) Volatile_Components J.15.8(9/3) pragma_argument_association 2.8(3/3) used 2.8(2), 13.12(11/3), L(27.3/3), P pragmas All_Calls_Remote E.2.3(5), L(2) Assert 11.4.2(3/2), L(2.1/2) Assertion_Policy 11.4.2(6.1/3), 11.4.2(6/2), L(2.2/2), L(2.3/3) Asynchronous J.15.13(2/3), L(3.1/3) Atomic J.15.8(2/3), L(4.1/3) Atomic_Components J.15.8(5/3), L(5.1/3) Attach_Handler J.15.7(4/3), L(6.1/3) Convention J.15.5(4/3), L(8.1/3) CPU J.15.9(2/3), L(8.2/3) Default_Storage_Pool 13.11.3(3/3), L(8.3/3) Detect_Blocking H.5(3/2), L(8.4/2) Discard_Names C.5(3), L(9) Dispatching_Domain J.15.10(2/3), L(9.1/3) Elaborate 10.2.1(20), L(10) Elaborate_All 10.2.1(21), L(11) Elaborate_Body 10.2.1(22), L(12) Export J.15.5(3/3), L(13.1/3) Import J.15.5(2/3), L(14.1/3) Independent J.15.8(4/3), L(14.2/3) Index 13 December 2012 902 Independent_Components J.15.8(7/3), L(14.3/3) Inline J.15.1(2/3), L(15.1/3) Inspection_Point H.3.2(3), L(16) Interrupt_Handler J.15.7(2/3), L(17.1/3) Interrupt_Priority J.15.11(4/3), L(18.1/3) Linker_Options B.1(8), L(19) List 2.8(21), L(20) Locking_Policy D.3(3), L(21) No_Return J.15.2(2/3), L(21.2/3) Normalize_Scalars H.1(3), L(22) Optimize 2.8(23), L(23) Pack J.15.3(2/3), L(24.1/3) Page 2.8(22), L(25) Partition_Elaboration_Policy H.6(3/2), L(25.1/2) Preelaborable_Initialization 10.2.1(4.2/2), L(25.2/2) Preelaborate 10.2.1(3), L(26) Priority J.15.11(2/3), L(27.1/3) Priority_Specific_Dispatching D.2.2(3.2/2), L(27.2/2) Profile 13.12(11/3), L(27.3/3) Pure 10.2.1(14), L(28) Queuing_Policy D.4(3), L(29) Relative_Deadline J.15.12(2/3), L(29.2/3) Remote_Call_Interface E.2.3(3), L(30) Remote_Types E.2.2(3), L(31) Restrictions 13.12(3), L(32) Reviewable H.3.1(3), L(33) Shared_Passive E.2.1(3), L(34) Storage_Size J.15.4(2/3), L(35.1/3) Suppress 11.5(4/2), J.10(3/2), L(36) Task_Dispatching_Policy D.2.2(3), L(37) Unchecked_Union J.15.6(2/3), L(37.2/3) Unsuppress 11.5(4.1/2), L(37.3/2) Volatile J.15.8(3/3), L(38.1/3) Volatile_Components J.15.8(6/3), L(39.1/3) Pre aspect 6.1.1(2/3) Pre'Class aspect 6.1.1(3/3) precedence of operators 4.5(1) precondition N(27.1/3) precondition check class-wide 6.1.1(33/3) specific 6.1.1(32/3) precondition expression class-wide 6.1.1(3/3) specific 6.1.1(2/3) Pred attribute 3.5(25) predecessor element of an ordered set A.18.9(81/3) predecessor node of an ordered map A.18.6(58/3) predefined environment A(1) 903 13 December 2012 Ada Reference Manual — 2012 Edition predefined exception 11.1(4) predefined library unit See language-defined library units predefined operation of a type 3.2.3(1/2) predefined operations of a discrete type 3.5.5(10/3) of a fixed point type 3.5.10(17) of a floating point type 3.5.8(3) of a record type 3.8(24) of an access type 3.10.2(34/2) of an array type 3.6.2(15) predefined operator 4.5(9) [partial] 3.2.1(9) predefined type 3.2.1(10) See language-defined types predicate 4.5.8(3/3), N(27.2/3) of a subtype 3.2.4(6/3) used 4.5.8(1/3), P predicate aspect 3.2.4(1/3) predicate check allocator 3.2.4(31/3) enabled 3.2.4(7/3) in out parameters 3.2.4(31/3) object_declaration 3.2.4(31/3) subtype conversion 4.6(51/3) predicate evaluated membership 4.5.2(29/3) Valid attribute 13.9.2(3/3), K.2(263/3) predicate specification 3.2.4(1/3) predicate-static 3.2.4(15/3) preelaborable of an elaborable construct 10.2.1(5) preelaborable initialization 10.2.1(11.1/2) Preelaborable_Initialization pragma 10.2.1(4.2/2), L(25.2/2) Preelaborate aspect 10.2.1(11/3) Preelaborate pragma 10.2.1(3), L(26) preelaborated 10.2.1(11/3) [partial] 10.2.1(11/3), E.2.1(9) preempt a running task D.2.3(9/2) preference for root numeric operators and ranges 8.6(29) for universal access equality operators 8.6(29.1/3) preference control See requeue 9.5.4(1) prefix 4.1(4) of a prefixed view 4.1.3(9.2/3) used 4.1.1(2), 4.1.2(2), 4.1.3(2), 4.1.4(2), 4.1.4(4), 4.1.6(10/3), 6.4(2), 6.4(3), P prefixed view 4.1.3(9.2/3) prefixed view profile 6.3.1(24.1/2) Prepend in Ada.Containers.Doubly_Linked_- Lists A.18.3(22/2) in Ada.Containers.Vectors A.18.2(44/2), A.18.2(45/2) Prepend_Child in Ada.Containers.Multiway_Trees A.18.10(51/3) prescribed result for the evaluation of a complex arithmetic operation G.1.1(42) for the evaluation of a complex elementary function G.1.2(35) for the evaluation of an elementary function A.5.1(37) Previous in Ada.Containers.Doubly_Linked_- Lists A.18.3(38/2), A.18.3(40/2) in Ada.Containers.Ordered_Maps A.18.6(36/2), A.18.6(37/2) in Ada.Containers.Ordered_Sets A.18.9(47/2), A.18.9(48/2) in Ada.Containers.Vectors A.18.2(65/2), A.18.2(66/2) in Ada.Iterator_Interfaces 5.5.1(4/3) Previous_Sibling in Ada.Containers.Multiway_Trees A.18.10(65/3), A.18.10(67/3) primary 4.4(7/3) used 4.4(6), P primitive function A.5.3(17) primitive operation [partial] 3.2(1) primitive operations N(28) of a type 3.2.3(1/2) primitive operator of a type 3.2.3(8) primitive subprograms of a type 3.2.3(2) priority D.1(15) of a protected object D.3(6/2) Priority aspect D.1(6.2/3) Priority attribute D.5.2(3/2) priority inheritance D.1(15) priority inversion D.2.3(11/2) priority of an entry call D.4(9) Priority pragma J.15.11(2/3), L(27.1/3) Priority subtype of Any_Priority in System 13.7(16) Priority_Queuing queuing policy D.4(8) Priority_Specific_Dispatching pragma D.2.2(3.2/2), L(27.2/2) private declaration of a library unit 10.1.1(12) private descendant of a library unit 10.1.1(12) private extension 3.2(4.1/2), 3.9(2.1/2), 3.9.1(1/2), N(29/2) [partial] 7.3(14), 12.5.1(5/3) private library unit 10.1.1(12) Index Ada Reference Manual — 2012 Edition private operations 7.3.1(1) private part 8.2(5) of a package 7.1(6/2) of a protected unit 9.4(11/2) of a task unit 9.1(9) private type 3.2(4.1/2), N(30/2) [partial] 7.3(14) private types and private extensions 7.3(1) private_extension_declaration 7.3(3/3) used 3.2.1(2), P private_type_declaration 7.3(2/3) used 3.2.1(2), P procedure 6(1), N(30.1/2) null 6.7(3/3) procedure instance 12.3(13) procedure_call_statement 6.4(2) used 5.1(4/2), 9.7.2(3.1/2), P procedure_or_entry_call 9.7.2(3.1/2) used 9.7.2(3/2), 9.7.4(4/2), P procedure_specification 6.1(4.1/2) used 6.1(4/2), 6.7(2/3), P processing node E(2) profile 6.1(22) associated with a dereference 4.1(10) fully conformant 6.3.1(18/3) mode conformant 6.3.1(16/3) No_Implementation_Extensions 13.12.1(10/3) subtype conformant 6.3.1(17/3) type conformant 6.3.1(15/2) Profile pragma 13.12(11/3), L(27.3/3) profile resolution rule name with a given expected profile 8.6(26) progenitor N(30.2/2) progenitor subtype 3.9.4(9/2) progenitor type 3.9.4(9/2) program 10.2(1), N(31) program execution 10.2(1) program library See library 10(2) See library 10.1.4(9) Program unit 10.1(1), N(32) program unit pragma 10.1.5(2) Inline J.15.1(1/3) library unit pragmas 10.1.5(7/3) Program_Error raised by failure of run-time check 1.1.3(20), 1.1.5(8), 1.1.5(12), 3.5.5(8), 3.10.2(29), 3.11(14), 4.6(57/3), 4.8(10.1/3), 4.8(10.2/2), 4.8(10.3/2), 4.8(10.4/3), 6.2(12/3), 6.4(11/2), 6.5(8/3), 6.5(21/3), 6.5.1(9/2), 7.6.1(15), 7.6.1(16/2), 7.6.1(17), 7.6.1(17.2/1), 7.6.1(18/2), 8.5.4(8.1/1), 9.4(20), 9.5.1(17), 9.5.3(7/3), 9.7.1(21), 9.8(20/3), 10.2(26), 11.1(4), 11.5(19), 12.5.1(23.3/2), 13.7.1(16), 13.9.1(9), 13.11.2(13), 13.11.2(14), 13.11.4(27/3), 13.11.4(30/3), A.5.2(40.1/1), A.7(14/3), B.3.3(22/2), C.3.1(10/3), C.3.1(11/3), C.3.2(17/3), C.3.2(20), C.3.2(21/3), C.3.2(22/2), C.7.1(15), C.7.1(17/3), C.7.2(13), D.3(13), D.3(13.2/2), D.3(13.4/2), D.5.1(9), D.5.2(6/3), D.7(7.1/3), D.7(10.4/3), D.7(19.1/2), D.10(10), D.11(8), E.1(10/2), E.3(6), E.4(18/1), J.7.1(7) protected_operation_declaration 9.4(5/1) used 9.4(4), 9.4(6), P protected_operation_item 9.4(8/1) used 9.4(7/3), P protected_type_declaration 9.4(2/3) used 3.2.1(3/3), P ptrdiff_t in Interfaces.C B.3(12) PU1 in Ada.Characters.Latin_1 A.3.3(18) PU2 in Ada.Characters.Latin_1 A.3.3(18) public declaration of a library unit 10.1.1(12) public descendant of a library unit 10.1.1(12) public library unit 10.1.1(12) punctuation_connector 2.1(10.2/2) used 2.3(3.1/3), P pure 10.2.1(15.1/3) Pure aspect 10.2.1(17/3) Pure pragma 10.2.1(14), L(28) Put in Ada.Text_IO A.10.1(42), in Standard A.1(46) prohibited tampering with a holder A.18.18(35/3) tampering with a list A.18.3(69.1/3) tampering with a map A.18.4(15.1/3) tampering with a set A.18.7(14.1/3) tampering with a tree A.18.10(90/3) tampering with a vector A.18.2(97.1/3) propagate 11.4(1) an exception occurrence by an A.10.1(48), A.10.1(55), A.10.1(60), A.10.1(66), A.10.1(67), A.10.1(71), A.10.1(72), A.10.1(76), A.10.1(77), A.10.1(82), A.10.1(83) in Ada.Text_IO.Bounded_IO A.10.11(4/2), A.10.11(5/2) in Ada.Text_IO.Complex_IO G.1.3(7), G.1.3(8) in Ada.Text_IO.Editing F.3.3(14), execution, to a dynamically enclosing execution 11.4(6) proper_body 3.11(6) used 3.11(5), 10.1.3(7), P protected action 9.5.1(4) complete 9.5.1(6) start 9.5.1(5) protected calling convention 6.3.1(12) protected declaration 9.4(1) protected entry 9.4(1) protected function 9.5.1(1) protected interface 3.9.4(5/2) protected object 9(3), 9.4(1) protected operation 9.4(1) protected procedure 9.5.1(1) protected subprogram 9.4(1), 9.5.1(1) protected tagged type 3.9.4(6/2) protected type N(33/2) protected unit 9.4(1) protected_body 9.4(7/3) used 3.11(6), P protected_body_stub 10.1.3(6) used 10.1.3(2), P protected_definition 9.4(4) used 9.4(2/3), 9.4(3/3), P protected_element_declaration 9.4(6) used 9.4(4), P F.3.3(15), F.3.3(16) in Ada.Text_IO.Unbounded_IO A.10.12(4/2), A.10.12(5/2) Put_Line in Ada.Text_IO A.10.1(50) in Ada.Text_IO.Bounded_IO A.10.11(6/2), A.10.11(7/2) in Ada.Text_IO.Unbounded_IO A.10.12(6/2), A.10.12(7/2) Q qualified_expression 4.7(2) used 4.1(2/3), 4.8(2/3), 13.8(2), P quantified expressions 4.5.8(5/3) quantified_expression 4.5.8(1/3) used 4.4(7/3), P quantifier 4.5.8(2/3) used 4.5.8(1/3), P Query_Element in Ada.Containers.Doubly_Linked_- Lists A.18.3(16/2) in Ada.Containers.Hashed_Maps A.18.5(16/2) in Ada.Containers.Hashed_Sets A.18.8(17/2) Index 13 December 2012 904 Ada Reference Manual — 2012 Edition in Ada.Containers.Indefinite_Holders A.18.18(14/3) in Ada.Containers.Multiway_Trees A.18.10(26/3) in Ada.Containers.Ordered_Maps A.18.6(15/2) in Ada.Containers.Ordered_Sets A.18.9(16/2) in Ada.Containers.Vectors A.18.2(31/2), A.18.2(32/2) Question in Ada.Characters.Latin_1 A.3.3(10) Queue in Ada.Containers.Bounded_Priority_Qu eues A.18.31(4/3) in Ada.Containers.Bounded_Synchronize d_Queues A.18.29(4/3) in Ada.Containers.Synchronized_Queue_ Interfaces A.18.27(4/3) in Ada.Containers.Unbounded_Priority_ Queues A.18.30(4/3) in Ada.Containers.Unbounded_Synchron ized_Queues A.18.28(4/3) queuing policy D.4(1/3), D.4(6) FIFO_Queuing D.4(7/2) Priority_Queuing D.4(8) Queuing_Policy pragma D.4(3), L(29) Quotation in Ada.Characters.Latin_1 A.3.3(8) quotation mark 2.1(15/3) quoted string See string_literal 2.6(1) R raise an exception 11(1/3) an exception 11.3(4/2) an exception N(18) an exception occurrence 11.4(3) Raise_Exception in Ada.Exceptions 11.4.1(4/3) raise_statement 11.3(2/2) used 5.1(4/2), P Random in Ada.Numerics.Discrete_Random A.5.2(20) in Ada.Numerics.Float_Random A.5.2(8) random number A.5.2(1) range 3.5(3), 3.5(4) of a scalar subtype 3.5(7) used 3.5(2), 3.6(6), 3.6.1(3), 3.8.1(5/3), Range(N) attribute 3.6.2(8) range_attribute_designator 4.1.4(5) used 4.1.4(4), P range_attribute_reference 4.1.4(4) used 3.5(3), P Range_Check 11.5(17) [partial] 3.2.2(11), 3.5(24), 3.5(27), 3.5(39.12/3), 3.5(39.4/3), 3.5(39.5/3), 3.5(43/3), 3.5(55/3), 3.5.5(7), 3.5.9(19), 4.2(11), 4.3.3(28), 4.5.1(8), 4.5.6(6), 4.5.6(13), 4.6(28), 4.6(38), 4.6(46), 4.6(51/3), 4.7(4), 13.13.2(35/3), A.5.2(39), A.5.3(26), A.5.3(29), A.5.3(50), A.5.3(53), A.5.3(59), A.5.3(62), K.2(11), K.2(114), K.2(122), K.2(184), K.2(220), K.2(241), K.2(41), K.2(47) range_constraint 3.5(2) used 3.2.2(6), 3.5.9(5), J.3(2), P Ravenscar D.13(1/3) RCI generic E.2.3(7/3) library unit E.2.3(7/3) package E.2.3(7/3) Re in Ada.Numerics.Generic_Complex_- Arrays G.3.2(7/2), G.3.2(27/2) in Ada.Numerics.Generic_Complex_- Types G.1.1(6) re-raise statement 11.3(3) read the value of an object 3.3(14) in Ada.Direct_IO A.8.4(12) in Ada.Sequential_IO A.8.1(12) in Ada.Storage_IO A.9(6) in Ada.Streams 13.13.1(5) in Ada.Streams.Stream_IO A.12.1(15), A.12.1(16) in System.RPC E.5(7) Read aspect 13.13.2(38/3) Read attribute 13.13.2(6), 13.13.2(14) Read clause 13.3(7/2), 13.13.2(38/3) ready a task state 9(10) ready queue D.2.1(5/2) ready task D.2.1(5/2) Real in Interfaces.Fortran B.5(6) real literal 2.4(1) real literals 3.5.6(4) real time D.8(18) real type 3.2(3), 3.5.6(1), N(34) real-time systems C(1), D(1) Real_Arrays child of Ada.Numerics G.3.1(31/2) Real_Matrix in Ada.Numerics.Generic_Real_Arrays Real_Time child of Ada D.8(3) real_type_definition 3.5.6(2) used 3.2.1(4/2), P Real_Vector in Ada.Numerics.Generic_Real_Arrays G.3.1(4/2) receiving stub E.4(10) reclamation of storage 13.11.2(1) recommended level of support 13.1(20/3) Address attribute 13.3(15) Alignment attribute for objects 13.3(33) Alignment attribute for subtypes 13.3(29) aspect Pack 13.2(7/3) bit ordering 13.5.3(7) Component_Size attribute 13.3(71) enumeration_representation_clause 13.4(9) record_representation_clause 13.5.1(17) required in Systems Programming Annex C.2(2/3) Size attribute 13.3(42/2), 13.3(54) Stream_Size attribute 13.13.2(1.7/2) unchecked conversion 13.9(16) with respect to nonstatic expressions 13.1(21/3) record 3.8(1) explicitly limited 3.8(13.1/3) record extension 3.4(5/2), 3.9.1(1/2), N(35) Record layout aspect 13.5(1) record type 3.8(1), N(36) record_aggregate 4.3.1(2) used 4.3(2), P record_component_association 4.3.1(4/2) used 4.3.1(3), P record_component_association_list 4.3.1(3) used 4.3.1(2), 4.3.2(2), P record_definition 3.8(3) used 3.8(2), 3.9.1(2), P record_extension_part 3.9.1(2) used 3.4(2/2), P record_representation_clause 13.5.1(2) used 13.1(2/1), P record_type_definition 3.8(2) used 3.2.1(4/2), P reentrant A(3/2) Reference in Ada.Containers.Doubly_Linked_- Lists A.18.3(17.4/3) in Ada.Containers.Hashed_Maps A.18.5(17.4/3), A.18.5(17.6/3) in Ada.Containers.Indefinite_Holders G.3.1(4/2) A.18.18(19/3) 4.4(3.2/3), P Range attribute 3.5(14), 3.6.2(7) real_range_specification 3.5.7(3) used 3.5.7(2), 3.5.9(3), 3.5.9(4), P in Ada.Containers.Multiway_Trees A.18.10(31/3) 905 13 December 2012 Index Ada Reference Manual — 2012 Edition in Ada.Containers.Ordered_Maps A.18.6(16.4/3), A.18.6(16.6/3) in Ada.Containers.Vectors A.18.2(34.4/3), A.18.2(34.6/3) in Ada.Interrupts C.3.2(10) in Ada.Task_Attributes C.7.2(5) reference discriminant 4.1.5(3/3) reference object 4.1.5(3/3) reference parameter passing 6.2(2) reference type 4.1.5(3/3), N(36.1/3) Reference_Preserving_Key in Ada.Containers.Hashed_Sets A.18.8(58.2/3), A.18.8(58.4/3) in Ada.Containers.Ordered_Sets A.18.9(73.2/3), A.18.9(73.4/3) Reference_Type in Ada.Containers.Doubly_Linked_- Lists A.18.3(17.2/3) in Ada.Containers.Hashed_Maps A.18.5(17.2/3) in Ada.Containers.Hashed_Sets A.18.8(58.1/3) in Ada.Containers.Indefinite_Holders A.18.18(17/3) in Ada.Containers.Multiway_Trees A.18.10(29/3) in Ada.Containers.Ordered_Maps A.18.6(16.2/3) in Ada.Containers.Ordered_Sets A.18.9(73.1/3) in Ada.Containers.Vectors A.18.2(34.2/3) references 1.2(1/3) Registered_Trade_Mark_Sign in Ada.Characters.Latin_1 A.3.3(21/3) Reinitialize in Ada.Task_Attributes C.7.2(6) relation 4.4(3/3) used 4.4(2), P relational operator 4.5.2(1) relational_operator 4.5(3) used 4.4(2.2/3), 4.4(3/3), P Relative_Deadline aspect D.2.6(9.2/3) Relative_Deadline pragma J.15.12(2/3), L(29.2/3) Relative_Name in Ada.Directories.Hierarchical_File_Na mes A.16.1(13/3) relaxed mode G.2(1) release execution resource associated with protected object 9.5.1(6) rem operator 4.4(1/3), 4.5.5(1) Remainder attribute A.5.3(45) remote access E.1(5) remote access type E.2.2(9/3) remote access-to-class-wide type E.2.2(9/3) remote access-to-subprogram type E.2.2(9/3) remote call interface E.2(4/3), E.2.3(7/3) remote procedure call asynchronous E.4.1(9/3) remote subprogram E.2.3(7/3) remote subprogram binding E.4(1) remote subprogram call E.4(1) remote types library unit E.2(4/3), E.2.2(4/3) Remote_Call_Interface aspect E.2.3(7/3) Remote_Call_Interface pragma E.2.3(3), L(30) Remote_Types aspect E.2.2(4/3) Remote_Types pragma E.2.2(3), L(31) Remove_Task in Ada.Execution_Time.Group_Budgets D.14.2(8/2) Replace_Slice in Ada.Strings.Bounded A.4.4(58), A.4.4(59) in Ada.Strings.Fixed A.4.3(23), A.4.3(24) in Ada.Strings.Unbounded A.4.5(53), A.4.5(54) Replenish in Ada.Execution_Time.Group_Budgets D.14.2(9/2) Replicate in Ada.Strings.Bounded A.4.4(78), A.4.4(79), A.4.4(80) representation change of 13.6(1/3) representation aspect 13.1(8/3) coding 13.4(7) convention, calling convention Rename in Ada.Directories A.16(12/2) renamed entity 8.5(3) renamed view 8.5(3) renaming N(36.2/2) renaming-as-body 8.5.4(1/3) renaming-as-declaration 8.5.4(1/3) renaming_declaration 8.5(2) used 3.1(3/3), P rendezvous 9.5.2(25) Replace in Ada.Containers.Hashed_Maps A.18.5(23/2) in Ada.Containers.Hashed_Sets A.18.8(22/2), A.18.8(53/2) in Ada.Containers.Ordered_Maps A.18.6(22/2) in Ada.Containers.Ordered_Sets A.18.9(21/2), A.18.9(66/2) Replace_Element in Ada.Containers.Doubly_Linked_- Lists A.18.3(15/2) in Ada.Containers.Hashed_Maps A.18.5(15/2) in Ada.Containers.Hashed_Sets A.18.8(16/2) in Ada.Containers.Indefinite_Holders A.18.18(13/3) in Ada.Containers.Multiway_Trees A.18.10(25/3) in Ada.Containers.Ordered_Maps A.18.6(14/2) in Ada.Containers.Ordered_Sets A.18.9(15/2) in Ada.Containers.Vectors A.18.2(29/2), A.18.2(30/2) in Ada.Strings.Bounded A.4.4(27) in Ada.Strings.Unbounded A.4.5(21) B.1(1/3) export B.1(1/3) external_name B.1(1/3) import B.1(1/3) layout 13.5(1) link_name B.1(1/3) record layout 13.5(1) specifiable attributes 13.3(5/3) storage place 13.5(1) representation attribute 13.3(1/1) representation item 13.1(1/1) representation of an object 13.1(7/2) representation pragma 13.1(1/1) Asynchronous J.15.13(1/3) Atomic J.15.8(9/3) Atomic_Components J.15.8(9/3) Convention J.15.5(1/3) Discard_Names C.5(6) Export J.15.5(1/3) Import J.15.5(1/3) Independent J.15.8(9/3) Independent_Components J.15.8(9/3) No_Return J.15.2(1/3) Pack J.15.3(1/3) Unchecked_Union J.15.6(1/3) Volatile J.15.8(9/3) Volatile_Components J.15.8(9/3) representation-oriented attributes of a fixed point subtype A.5.4(1) of a floating point subtype A.5.3(1) representation_clause See aspect_clause 13.1(4/1) represented in canonical form A.5.3(10) requested decimal precision of a floating point type 3.5.7(4) requeue 9.5.4(1) requeue target 9.5.4(3/3) requeue-with-abort 9.5.4(13) requeue_statement 9.5.4(2/3) used 5.1(4/2), P require overriding 3.9.3(6/2) Index 13 December 2012 906 Ada Reference Manual — 2012 Edition requires a completion 3.11.1(1/3), 3.11.1(6/3) declaration for which aspect restrictions Immediate_Reclamation H.4(10) Max_Asynchronous_Select_Nesting Elaborate_Body is True 10.2.1(25/3) D.7(18/1) declaration of a partial view 7.3(4) declaration to which a pragma Elaborate_Body applies 10.2.1(25/3) deferred constant declaration 7.4(2/3) generic_package_declaration 7.1(5/2) generic_subprogram_declaration 6.1(20/3) incomplete_type_declaration 3.10.1(3/3) package_declaration 7.1(5/2) protected entry_declaration 9.5.2(16) protected_declaration 9.4(11.2/2) subprogram_declaration 6.1(20/3) task_declaration 9.1(9.3/2) requires late initialization 3.3.1(8.1/2) requires overriding [partial] 6.1.1(16/3) Reraise_Occurrence in Ada.Exceptions 11.4.1(4/3) Reserve_Capacity in Ada.Containers.Hashed_Maps A.18.5(9/2) in Ada.Containers.Hashed_Sets A.18.8(11/2) Max_Entry_Queue_Length D.7(19.1/2) Max_Protected_Entries D.7(14) Max_Select_Alternatives D.7(12) Max_Storage_At_Blocking D.7(17/1) Max_Task_Entries D.7(13) Max_Tasks D.7(19/1) No_Abort_Statements D.7(5/3) No_Access_Parameter_Allocators H.4(8.3/3) No_Access_Subprograms H.4(17) No_Allocators H.4(7) No_Anonymous_Allocators H.4(8.1/3) No_Asynchronous_Control J.13(3/2) No_Coextensions H.4(8.2/3) No_Delay H.4(21) No_Dependence 13.12.1(6/2) No_Dispatch H.4(19) No_Dynamic_Attachment D.7(10/3) No_Dynamic_Priorities D.7(9/2) No_Exceptions H.4(12) No_Fixed_Point H.4(15) No_Floating_Point H.4(14) No_Implementation_Aspect_Specificati ons 13.12.1(1.1/3) in Ada.Containers.Vectors No_Implementation_Attributes A.18.2(20/2) 13.12.1(2/2) reserved interrupt C.3(2) reserved word 2.9(2/3) Reserved_128 in Ada.Characters.Latin_1 A.3.3(17) Reserved_129 in Ada.Characters.Latin_1 A.3.3(17) Reserved_132 in Ada.Characters.Latin_1 A.3.3(17) Reserved_153 in Ada.Characters.Latin_1 A.3.3(19) Reserved_Check [partial] C.3.1(10/3) Reset in Ada.Direct_IO A.8.4(8) in Ada.Numerics.Discrete_Random No_Implementation_Identifiers 13.12.1(2.1/3) No_Implementation_Pragmas 13.12.1(3/2) No_Implementation_Units 13.12.1(3.1/3) No_Implicit_Heap_Allocations D.7(8) No_IO H.4(20/2) No_Local_Allocators H.4(8/1) No_Local_Protected_Objects D.7(10.1/3) No_Local_Timing_Events D.7(10.2/3) No_Nested_Finalization D.7(4/3) No_Obsolescent_Features 13.12.1(4/3) No_Protected_Type_Allocators No_Task_Termination D.7(15.1/2) No_Terminate_Alternatives D.7(6) No_Unchecked_Access H.4(18) No_Unchecked_Conversion J.13(4/2) No_Unchecked_Deallocation J.13(5/2) No_Use_Of_Attribute 13.12.1(6.2/3) No_Use_Of_Pragma 13.12.1(6.3/3) Simple_Barriers D.7(10.9/3) Restrictions pragma 13.12(3), L(32) Result attribute 6.1.1(29/3) result interval for a component of the result of evaluating a complex function G.2.6(3) for the evaluation of a predefined arithmetic operation G.2.1(8) for the evaluation of an elementary function G.2.4(2) result subtype of a function 6.5(3/2) return object extended_return_statement 6.5(5.10/3) simple_return_statement 6.5(6/2) return statement 6.5(1/2) return_subtype_indication 6.5(2.3/2) used 6.5(2.1/3), P reverse iterator 5.5.2(4/3) Reverse_Elements in Ada.Containers.Doubly_Linked_- Lists A.18.3(27/2) in Ada.Containers.Vectors A.18.2(54/2) Reverse_Find in Ada.Containers.Doubly_Linked_- Lists A.18.3(42/2) in Ada.Containers.Vectors A.18.2(70/2) Reverse_Find_Index in Ada.Containers.Vectors A.18.2(69/2) Reverse_Iterate in Ada.Containers.Doubly_Linked_- Lists A.18.3(46/2) in Ada.Containers.Ordered_Maps A.18.6(51/2) A.5.2(21), A.5.2(24) D.7(10.3/2) in Ada.Containers.Ordered_Sets in Ada.Numerics.Float_Random A.5.2(9), A.5.2(12) in Ada.Sequential_IO A.8.1(8) in Ada.Streams.Stream_IO A.12.1(10) in Ada.Text_IO A.10.1(11) resolution rules 1.1.2(26/3) resolve overload resolution 8.6(14) restriction 13.12(4/2) used 13.12(3), L(32) restriction_parameter_argument 13.12(4.1/2) used 13.12(4/2), P No_Protected_Types H.4(5) No_Recursion H.4(22) No_Reentrancy H.4(23) No_Relative_Delay D.7(10.5/3) No_Requeue_Statements D.7(10.6/3) No_Select_Statements D.7(10.7/3) No_Specific_Termination_Handlers D.7(10.8/3) No_Specification_of_Aspect 13.12.1(6.1/3) A.18.9(61/2) in Ada.Containers.Vectors A.18.2(74/2) Reverse_Iterate_Children in Ada.Containers.Multiway_Trees A.18.10(69/3) Reverse_Solidus in Ada.Characters.Latin_1 A.3.3(12) reversible iterable container object 5.5.1(11/3) No_Standard_Allocators_After_Elabora reversible iterable container type tion D.7(19.2/3) 5.5.1(11/3) No_Task_Allocators D.7(7) No_Task_Hierarchy D.7(3/3) reversible iterator object 5.5.1(6/3) reversible iterator type 5.5.1(6/3) 907 13 December 2012 Index Ada Reference Manual — 2012 Edition Reversible_Iterator in Ada.Iterator_Interfaces 5.5.1(4/3) Reviewable pragma H.3.1(3), L(33) RI in Ada.Characters.Latin_1 A.3.3(17) right parenthesis 2.1(15/3) Right_Angle_Quotation in Ada.Characters.Latin_1 A.3.3(22) Right_Curly_Bracket in Ada.Characters.Latin_1 A.3.3(14) Right_Parenthesis in Ada.Characters.Latin_1 A.3.3(8) Right_Square_Bracket in Ada.Characters.Latin_1 A.3.3(12) Ring_Above in Ada.Characters.Latin_1 A.3.3(22) root of a tree A.18.10(3/3) in Ada.Containers.Multiway_Trees A.18.10(22/3) root library unit 10.1.1(10) root node of a tree A.18.10(3/3) root type of a class 3.4.1(2/2) root_integer 3.5.4(14) [partial] 3.4.1(8) root_real 3.5.6(3) [partial] 3.4.1(8) Root_Storage_Pool in System.Storage_Pools 13.11(6/2) Root_Storage_Pool_With_Subpools in System.Storage_Pools.Subpools 13.11.4(4/3) Root_Stream_Type in Ada.Streams 13.13.1(3/2) Root_Subpool in System.Storage_Pools.Subpools 13.11.4(5/3) rooted at a type 3.4.1(2/2) roots the subtree A.18.10(3/3) rotate B.2(9) Round attribute 3.5.10(12) Round_Robin child of Ada.Dispatching D.2.5(4/2) Round_Robin_Within_Priorities task dispatching policy D.2.5(2/2) Rounding attribute A.5.3(36) RPC child of System E.5(3) RPC-receiver E.5(21) RPC_Receiver in System.RPC E.5(11) RS in Ada.Characters.Latin_1 A.3.3(6) run-time check See language-defined check 11.5(2/3) run-time error 1.1.2(30), 1.1.5(6), run-time semantics 1.1.2(30) run-time type See tag 3.9(3) running a program See program execution 10.2(1) running task D.2.1(6/2) S safe range of a floating point type 3.5.7(9) of a floating point type 3.5.7(10) Safe_First attribute A.5.3(71), G.2.2(5) Safe_Last attribute A.5.3(72), G.2.2(6) safety-critical systems H(1/2) satisfies a discriminant constraint 3.7.1(11) a range constraint 3.5(4) a subtype predicate 3.2.4(32/3) an index constraint 3.6.1(7) for an access value 3.10(15/2) Saturday in Ada.Calendar.Formatting 9.6.1(17/2) Save in Ada.Numerics.Discrete_Random A.5.2(24) in Ada.Numerics.Float_Random A.5.2(12) Save_Occurrence in Ada.Exceptions 11.4.1(6/2) scalar type 3.2(3), 3.5(1), N(37) scalar_constraint 3.2.2(6) used 3.2.2(5), P scale of a decimal fixed point subtype 3.5.10(11), K.2(216) Scale attribute 3.5.10(11) Scaling attribute A.5.3(27) SCHAR_MAX in Interfaces.C B.3(6) SCHAR_MIN in Interfaces.C B.3(6) SCI in Ada.Characters.Latin_1 A.3.3(19) scope informal definition 3.1(8) of (a view of) an entity 8.2(11) of a declaration 8.2(10) of a use_clause 8.4(6) of a with_clause 10.1.2(5) of an aspect_specification 8.2(10.1/3) of an attribute_definition_clause 8.2(10.1/3) Search_Type in Ada.Directories A.16(31/2) Second in Ada.Calendar.Formatting 11.5(2/3), 11.6(1/3) 9.6.1(26/2) run-time polymorphism 3.9.2(1/2) Second_Duration subtype of Day_Duration in Ada.Calendar.Formatting 9.6.1(20/2) Second_Number subtype of Natural in Ada.Calendar.Formatting 9.6.1(20/2) Seconds in Ada.Calendar 9.6(13) in Ada.Real_Time D.8(14/2) Seconds_Count in Ada.Real_Time D.8(15) Seconds_Of in Ada.Calendar.Formatting 9.6.1(28/2) Section_Sign in Ada.Characters.Latin_1 A.3.3(21/3) secure systems H(1/2) select an entry call from an entry queue 9.5.3(13), 9.5.3(16) immediately 9.5.3(8) select_alternative 9.7.1(4) used 9.7.1(2), P select_statement 9.7(2) used 5.1(5/2), P selected_component 4.1.3(2) used 4.1(2/3), P selection of an entry caller 9.5.2(24) selective_accept 9.7.1(2) used 9.7(2), P selector_name 4.1.3(3) used 3.7.1(3), 4.1.3(2), 4.3.1(5), 6.4(5), 12.3(4), 12.7(3.1/2), P semantic dependence of one compilation unit upon another 10.1.1(26/2) semicolon 2.1(15/3) in Ada.Characters.Latin_1 A.3.3(10) separate compilation 10.1(1) Separate_Interrupt_Clocks_Supported in Ada.Execution_Time D.14(9.2/3) separator 2.2(3/2) separator_line 2.1(12/2) separator_paragraph 2.1(12.1/2) separator_space 2.1(11/2) sequence of characters of a string_literal 2.6(5) sequence_of_statements 5.1(2/3) used 5.3(2), 5.4(3), 5.5(2), 9.7.1(2), 9.7.1(5), 9.7.1(6), 9.7.2(3/2), 9.7.3(2), 9.7.4(3), 9.7.4(5), 11.2(2), 11.2(3), P sequential actions 9.10(11), C.6(17) sequential access A.8(2) sequential file A.8(1/2) Sequential_IO child of Ada A.8.1(2) Index 13 December 2012 908 Ada Reference Manual — 2012 Edition service an entry queue 9.5.3(13) set execution timer object D.14.1(12/2) group budget object D.14.2(15/2) termination handler C.7.3(9/2) timing event object D.15(9/2) in Ada.Containers.Hashed_Sets A.18.8(3/3) in Ada.Containers.Ordered_Sets A.18.9(4/3) in Ada.Environment_Variables A.17(6/2) set container A.18.7(1/2) Set_Bounded_String in Ada.Strings.Bounded A.4.4(12.1/2) Set_Col in Ada.Text_IO A.10.1(35) Set_CPU in System.Multiprocessors.Dispatching_ Domains D.16.1(12/3) Set_Deadline in Ada.Dispatching.EDF D.2.6(9/2) Set_Dependents_Fallback_Handler in Ada.Task_Termination C.7.3(5/2) Set_Directory in Ada.Directories A.16(6/2) Set_Error in Ada.Text_IO A.10.1(15) Set_Exit_Status in Ada.Command_Line A.15(9) Set_False in Ada.Synchronous_Task_Control D.10(4) Set_Handler in Set_Length in Ada.Containers.Vectors A.18.2(22/2) Set_Line in Ada.Text_IO A.10.1(36) Set_Line_Length in Ada.Text_IO A.10.1(23) Set_Mode in Ada.Streams.Stream_IO A.12.1(24) Set_Output in Ada.Text_IO A.10.1(15) Set_Page_Length in Ada.Text_IO A.10.1(24) Set_Pool_of_Subpool in System.Storage_Pools.Subpools 13.11.4(10/3) Set_Priority in Ada.Dynamic_Priorities D.5.1(4) Set_Quantum in Ada.Dispatching.Round_Robin D.2.5(4/2) Set_Re in Ada.Numerics.Generic_Complex_- Arrays G.3.2(8/2), G.3.2(28/2) in Ada.Numerics.Generic_Complex_- Types G.1.1(7) Set_Specific_Handler in Ada.Task_Termination C.7.3(6/2) Set_True in Ada.Synchronous_Task_Control D.10(4) Set_Unbounded_String in Ada.Strings.Unbounded A.4.5(11.1/2) Set_Value in Ada.Task_Attributes C.7.2(6) shared passive library unit E.2(4/3), Ada.Execution_Time.Group_Budgets D.14.2(10/2) in Ada.Execution_Time.Timers D.14.1(7/2) in Ada.Real_Time.Timing_Events D.15(5/2) Set_Im in Ada.Numerics.Generic_Complex_- Arrays G.3.2(8/2), G.3.2(28/2) in Ada.Numerics.Generic_Complex_- Types G.1.1(7) Set_Index in Ada.Direct_IO A.8.4(14) in Ada.Streams.Stream_IO A.12.1(22) Set_Input in Ada.Text_IO A.10.1(15) Set_Iterator_Interfaces in Ada.Containers.Hashed_Sets A.18.8(6.2/3) in Ada.Containers.Ordered_Sets A.18.9(7.2/3) E.2.1(4/3) shared variable protection of 9.10(1/3) Shared_Passive aspect E.2.1(4/3) Shared_Passive pragma E.2.1(3), L(34) shift B.2(9) short in Interfaces.C B.3(7) short-circuit control form 4.5.1(1) Short_Float 3.5.7(16) Short_Integer 3.5.4(25) SI in Ada.Characters.Latin_1 A.3.3(5) signal as defined between actions 9.10(2) See interrupt C.3(1/3) signal (an exception) See raise 11(1/3) signal handling example 9.7.4(10) signed integer type 3.5.4(1) signed_char in Interfaces.C B.3(8) signed_integer_type_definition 3.5.4(3) used 3.5.4(2), P Signed_Zeros attribute A.5.3(13) simple entry call 9.5.3(1) simple name of a file A.16(47/2) Simple_Barriers restriction D.7(10.9/3) simple_expression 4.4(4) used 3.5(3), 3.5.4(3), 3.5.7(3), 4.4(2.2/3), 4.4(3/3), 13.5.1(5), 13.5.1(6), P Simple_Name in Ada.Directories A.16(16/2), A.16(38/2) in Ada.Directories.Hierarchical_File_Na mes A.16.1(10/3) simple_return_statement 6.5(2/2) used 5.1(4/2), P simple_statement 5.1(4/2) used 5.1(3), P Sin in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(4) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(5) single class expected type 8.6(27/2) single entry 9.5.2(20) Single_Precision_Complex_Types in Interfaces.Fortran B.5(8) single_protected_declaration 9.4(3/3) used 3.3.1(2/3), P single_task_declaration 9.1(3/3) used 3.3.1(2/3), P Sinh in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(6) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(7) size of an object 13.1(7/2) in Ada.Direct_IO A.8.4(15) in Ada.Directories A.16(26/2), A.16(41/2) in Ada.Streams.Stream_IO A.12.1(23) Size (object) aspect 13.3(41) Size (subtype) aspect 13.3(48) Size attribute 13.3(40), 13.3(45) Size clause 13.3(7/2), 13.3(41), 13.3(48) size_t in Interfaces.C B.3(13) Skip_Line in Ada.Text_IO A.10.1(29) Skip_Page in Ada.Text_IO A.10.1(32) slice 4.1.2(2) used 4.1(2/3), P in Ada.Strings.Bounded A.4.4(28) in Ada.Strings.Unbounded A.4.5(22) 909 13 December 2012 Index Ada Reference Manual — 2012 Edition small of a fixed point type 3.5.9(8/2) Small aspect 3.5.10(2/1) Small attribute 3.5.10(2/1) Small clause 3.5.10(2/1), 13.3(7/2) SO in Ada.Characters.Latin_1 A.3.3(5) Soft_Hyphen in Ada.Characters.Latin_1 A.3.3(21/3) SOH in Ada.Characters.Latin_1 A.3.3(5) solidus 2.1(15/3) in Ada.Characters.Latin_1 A.3.3(8) Solve in Ada.Numerics.Generic_Complex_- Arrays G.3.2(46/2) in Ada.Numerics.Generic_Real_Arrays G.3.1(24/2) Sort in Ada.Containers.Doubly_Linked_- Lists A.18.3(49/2) in Ada.Containers.Vectors A.18.2(77/2) SOS in Ada.Characters.Latin_1 A.3.3(19) SPA in Ada.Characters.Latin_1 A.3.3(18) Space in Ada.Characters.Latin_1 A.3.3(8) in Ada.Strings A.4.1(4/2) special file A.16(45/2) special graphic character a category of Character A.3.2(32) Special_Set in Ada.Strings.Maps.Constants A.4.6(4) Specialized Needs Annexes 1.1.2(7) specifiable of Address for entries J.7.1(6) of Address for stand-alone objects and for program units 13.3(12) of Alignment for first subtypes 13.3(26.4/2) of Alignment for objects 13.3(25/2) of Bit_Order for record types and record extensions 13.5.3(4) of Component_Size for array types of Storage_Pool for a nonderived access-to-object type 13.11(15) of Storage_Size for a nonderived access- to-object type 13.11(15) of Storage_Size for a task first subtype J.9(3/3) of Write for a type 13.13.2(38/3) specifiable (of an attribute and for an entity) 13.3(5/3) specific handler C.7.3(9/2) specific postcondition expression 6.1.1(4/3) specific precondition expression 6.1.1(2/3) specific type 3.4.1(3/2) Specific_Handler in Ada.Task_Termination C.7.3(6/2) specified of an aspect of representation of an entity 13.1(17) of an operational aspect of an entity 13.1(18.1/1) specified (not!) 1.1.3(18) specified as independently addressable C.6(8.1/3) specified discriminant 3.7(18) Splice in Ada.Containers.Doubly_Linked_- Lists A.18.3(30/2), A.18.3(31/2), A.18.3(32/2) Splice_Children in Ada.Containers.Multiway_Trees A.18.10(57/3), A.18.10(58/3) Splice_Subtree in Ada.Containers.Multiway_Trees A.18.10(55/3), A.18.10(56/3) Split in Ada.Calendar 9.6(14) in Ada.Calendar.Formatting 9.6.1(29/2), 9.6.1(32/2), 9.6.1(33/2), 9.6.1(34/2) in Ada.Execution_Time D.14(8/2) in Ada.Real_Time D.8(16) Sqrt in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(3) in Ada.Numerics.Generic_Elementary_- 13.3(70) Functions A.5.1(4) of External_Tag for a tagged type 13.3(75/3), K.2(65) of Input for a type 13.13.2(38/3) of Machine_Radix for decimal first subtypes F.1(1) of Output for a type 13.13.2(38/3) of Read for a type 13.13.2(38/3) of Size for first subtypes 13.3(48) of Size for stand-alone objects 13.3(41) of Small for fixed point types SS2 in Ada.Characters.Latin_1 A.3.3(17) SS3 in Ada.Characters.Latin_1 A.3.3(17) SSA in Ada.Characters.Latin_1 A.3.3(17) ST in Ada.Characters.Latin_1 A.3.3(19) stand-alone constant 3.3.1(23/3) corresponding to a formal object of 3.5.10(2/1) Index mode in 12.4(10/2) stand-alone object 3.3.1(1/3) [partial] 12.4(10/2) stand-alone variable 3.3.1(23/3) Standard A.1(4) standard error file A.10(6) standard input file A.10(5) standard mode 1.1.5(11) standard output file A.10(5) standard storage pool 13.11(17) Standard_Error in Ada.Text_IO A.10.1(16), A.10.1(19) Standard_Input in Ada.Text_IO A.10.1(16), A.10.1(19) Standard_Output in Ada.Text_IO A.10.1(16), A.10.1(19) Start_Search in Ada.Directories A.16(32/2) State in Ada.Numerics.Discrete_Random A.5.2(23) in Ada.Numerics.Float_Random A.5.2(11) statement 5.1(3) used 5.1(2/3), P statement_identifier 5.1(8) used 5.1(7), 5.5(2), 5.6(2), P static 4.9(1) constant 4.9(24) constraint 4.9(27) delta constraint 4.9(29) digits constraint 4.9(29) discrete_range 4.9(25) discriminant constraint 4.9(31) expression 4.9(2) function 4.9(18) index constraint 4.9(30) range 4.9(25) range constraint 4.9(29) scalar subtype 4.9(26/3) string subtype 4.9(26/3) subtype 4.9(26/3) subtype 12.4(9/2) static semantics 1.1.2(28) Static_Predicate aspect 3.2.4(1/3) statically constrained 4.9(32) denote 4.9(14) statically compatible for a constraint and a scalar subtype 4.9.1(4/3) for a constraint and an access or composite subtype 4.9.1(4/3) for two subtypes 4.9.1(5/3) statically deeper 3.10.2(4), 3.10.2(17) statically determined tag 3.9.2(1/2) [partial] 3.9.2(15), 3.9.2(19) statically matching effect on subtype-specific aspects 13.1(14) for constraints 4.9.1(1/2) for ranges 4.9.1(3) 13 December 2012 910 Ada Reference Manual — 2012 Edition for subtypes 4.9.1(2/3) required 3.9.2(10/2), 3.10.2(27.1/2), 4.6(24.15/2), 4.6(24.5/2), 6.3.1(16.3/3), 6.3.1(17/3), 6.3.1(23), 6.5(5.2/3), 7.3(13), 8.5.1(4.2/2), 12.4(8.1/2), 12.5.1(14), 12.5.3(6), 12.5.3(7), 12.5.4(3), 12.7(7) statically tagged 3.9.2(4/2) statically unevaluated 4.9(32.1/3) Status_Error in Ada.Direct_IO A.8.4(18) in Ada.Directories A.16(43/2) in Ada.IO_Exceptions A.13(4) in Ada.Sequential_IO A.8.1(15) in Ada.Streams.Stream_IO A.12.1(26) in Ada.Text_IO A.10.1(85) storage deallocation unchecked 13.11.2(1) storage element 13.3(8) storage management user-defined 13.11(1) storage node E(2) storage place of a component 13.5(1) representation aspect 13.5(1) storage place attributes of a component 13.5.2(1) storage pool 3.10(7/1), N(37.1/3) default 13.11.3(4.1/3) storage pool element 13.11(11) storage pool that supports subpools Storage_Pools child of System 13.11(5) Storage_Size in System.Storage_Pools 13.11(9) in System.Storage_Pools.Subpools 13.11.4(16/3) Storage_Size (access) aspect 13.11(15) Storage_Size (task) aspect 13.3(65.2/3) Storage_Size attribute 13.3(60/3), 13.11(14), J.9(2) Storage_Size clause 13.3(7/2), 13.11(15) Storage_Size pragma J.15.4(2/3), L(35.1/3) Storage_Unit in System 13.7(13) stream 13.13(1), N(37.2/3) in Ada.Streams.Stream_IO A.12.1(13) in Ada.Text_IO.Text_Streams A.12.2(4) in Ada.Wide_Text_IO.Text_Streams A.12.3(4) in Ada.Wide_Wide_Text_IO.Text_- Streams A.12.4(4/2) stream file A.8(1/2) stream type 13.13(1) Stream_Access in Ada.Streams.Stream_IO A.12.1(4) in Ada.Text_IO.Text_Streams A.12.2(3) in Ada.Wide_Text_IO.Text_Streams A.12.3(3) Strings child of Ada A.4.1(3) child of Ada.Strings.UTF_Encoding A.4.11(22/3) child of Interfaces.C B.3.1(3) Strlen in Interfaces.C.Strings B.3.1(17) structure See record type 3.8(1) STS in Ada.Characters.Latin_1 A.3.3(18) STX in Ada.Characters.Latin_1 A.3.3(5) SUB in Ada.Characters.Latin_1 A.3.3(6) Sub_Second in Ada.Calendar.Formatting 9.6.1(27/2) subaggregate of an array_aggregate 4.3.3(6) subcomponent 3.2(6/2) subpool 13.11.4(18/3) subpool access type 13.11.4(22/3) subpool handle 13.11.4(18/3) Subpool_Handle in System.Storage_Pools.Subpools 13.11.4(6/3) subpool_specification 4.8(2.1/3) used 4.8(2/3), P Subpools child of System.Storage_Pools 13.11.4(18/3) in Ada.Wide_Wide_Text_IO.Text_- 13.11.4(3/3) storage pool type 13.11(11) Storage_Array in System.Storage_Elements 13.7.1(5) Storage_Check 11.5(23) [partial] 11.1(6), 13.3(67), 13.11(17), D.7(17/1), D.7(18/1), D.7(19/1) Storage_Count subtype of Storage_Offset in System.Storage_Elements 13.7.1(4) Storage_Element in System.Storage_Elements 13.7.1(5) Storage_Elements child of System 13.7.1(2/2) Storage_Error raised by failure of run-time check 4.8(14), 8.5.4(8.1/1), 11.1(4), 11.1(6), 11.5(23), 13.3(67), 13.11(17), 13.11(18), A.7(14/3), D.7(17/1), D.7(18/1), D.7(19.3/3), D.7(19/1) in Standard A.1(46) Storage_IO child of Ada A.9(3) Storage_Offset in System.Storage_Elements 13.7.1(3) Storage_Pool aspect 13.11(15) Storage_Pool attribute 13.11(13) Storage_Pool clause 13.3(7/2), 13.11(15) storage_pool_indicator 13.11.3(3.1/3) used 13.11.3(3/3), L(8.3/3) Streams A.12.4(3/2) Stream_Element in Ada.Streams 13.13.1(4/1) Stream_Element_Array in Ada.Streams 13.13.1(4/1) Stream_Element_Count subtype of Stream_Element_Offset in Ada.Streams 13.13.1(4/1) Stream_Element_Offset in Ada.Streams 13.13.1(4/1) Stream_IO child of Ada.Streams A.12.1(3/3) Stream_Size aspect 13.13.2(1.5/2) Stream_Size attribute 13.13.2(1.2/3) Stream_Size clause 13.3(7/2) Streams child of Ada 13.13.1(2) strict mode G.2(1) strict weak ordering A.18(5/3) String in Standard A.1(37/3) string type 3.6.3(1) String_Access in Ada.Strings.Unbounded A.4.5(7) string_element 2.6(3) used 2.6(2), P string_literal 2.6(2) used 4.4(7/3), 6.1(9), P subprogram 6(1), N(37.3/2) abstract 3.9.3(3/2) subprogram call 6.4(1) subprogram instance 12.3(13) subprogram_body 6.3(2/3) used 3.11(6), 9.4(8/1), 10.1.1(7), P subprogram_body_stub 10.1.3(3/3) used 10.1.3(2), P subprogram_declaration 6.1(2/3) used 3.1(3/3), 9.4(5/1), 9.4(8/1), 10.1.1(5), P subprogram_default 12.6(3/2) used 12.6(2.1/3), 12.6(2.2/3), P subprogram_renaming_declaration 8.5.4(2/3) used 8.5(2), 10.1.1(6), P subprogram_specification 6.1(4/2) used 3.9.3(1.1/3), 6.1(2/3), 6.3(2/3), 8.5.4(2/3), 10.1.3(3/3), 12.1(3/3), 12.6(2.1/3), 12.6(2.2/3), P subsystem 10.1(3), N(22) subtree node which roots A.18.10(3/3) of a tree A.18.10(3/3) Subtree_Node_Count in Ada.Containers.Multiway_Trees A.18.10(18/3) subtype 3.2(8/2), N(38/3) 911 13 December 2012 Index Ada Reference Manual — 2012 Edition constraint of 3.2(8/2) type of 3.2(8/2) values belonging to 3.2(8/2) subtype (of an object) See actual subtype of an object 3.3(23/3) Superscript_Two in Ada.Characters.Latin_1 A.3.3(22) support external streaming 13.13.2(52/3) Supported in Ada.Execution_Time.Interrupts D.14.3(3/3) See actual subtype of an object Suppress pragma 11.5(4/2), J.10(3/2), 3.3.1(9/2) L(36) System.Machine_Code 13.8(7) System.Multiprocessors D.16(3/3) System.Multiprocessors.Dispatching_Do mains D.16.1(3/3) System.RPC E.5(3) System.Storage_Elements 13.7.1(2/2) System.Storage_Pools 13.11(5) System.Storage_Pools.Subpools subtype conformance 6.3.1(17/3) [partial] 3.10.2(34/2), 9.5.4(17) required 3.9.2(10/2), 3.10.2(32/3), suppressed check 11.5(8/2) Suspend_Until_True in Ada.Synchronous_Task_Control 13.11.4(3/3) System_Dispatching_Domain in 4.6(24.20/3), 8.5.1(4.3/2), 8.5.4(5/3), 9.1(9.7/2), 9.1(9.8/2), 9.4(11.6/2), 9.4(11.7/2), 9.5.4(5/3), 12.4(8.2/2), 12.5.4(5/3) subtype conversion See type conversion 4.6(1/3) See also implicit subtype conversion 4.6(1/3) subtype-specific of a representation item 13.1(8/3) of an aspect 13.1(8/3) subtype_declaration 3.2.2(2/3) used 3.1(3/3), P subtype_indication 3.2.2(3/2) used 3.2.2(2/3), 3.3.1(2/3), 3.4(2/2), 3.6(6), 3.6(7/2), 3.6.1(3), 3.8.1(5/3), 3.10(3), 4.8(2/3), 5.5.2(2/3), 6.5(2.3/2), 7.3(3/3), P subtype_mark 3.2.2(4) used 3.2.2(3/2), 3.6(4), 3.7(5/2), 3.9.4(3/2), 3.10(6/2), 4.3.2(3), 4.4(3.2/3), 4.6(2), 4.7(2), 6.1(13/2), 6.1(15/3), 8.4(4/3), 8.5.1(2/3), 12.3(5), 12.4(2/3), 12.5.1(3/2), P subtypes of a profile 6.1(25) subunit 10.1.3(7), 10.1.3(8/2) of a program unit 10.1.3(8/2) used 10.1.1(3), P Succ attribute 3.5(22) Success in Ada.Command_Line A.15(8) successor element of a hashed set A.18.8(68/2) of a set A.18.7(6/2) of an ordered set A.18.9(81/3) successor node of a hashed map A.18.5(46/2) of a map A.18.4(6/2) of an ordered map A.18.6(58/3) Sunday in Ada.Calendar.Formatting 9.6.1(17/2) super See view conversion 4.6(5/2) Superscript_One in Ada.Characters.Latin_1 A.3.3(22) Superscript_Three in Ada.Characters.Latin_1 A.3.3(22) D.10(4) Suspend_Until_True_And_Set_Deadline in Ada.Synchronous_Task_Control.EDF D.10(5.2/3) Suspension_Object in Ada.Synchronous_Task_Control D.10(4) Swap in Ada.Containers.Doubly_Linked_- Lists A.18.3(28/2) in Ada.Containers.Multiway_Trees A.18.10(37/3) in Ada.Containers.Vectors A.18.2(55/2), A.18.2(56/2) Swap_Links in Ada.Containers.Doubly_Linked_- Lists A.18.3(29/2) Symmetric_Difference in Ada.Containers.Hashed_Sets A.18.8(35/2), A.18.8(36/2) in Ada.Containers.Ordered_Sets A.18.9(36/2), A.18.9(37/2) SYN in Ada.Characters.Latin_1 A.3.3(6) synchronization 9(1/3) Synchronization aspect 9.5(12/3) synchronization_kind 9.5(10/3) synchronized N(38.1/2) synchronized interface 3.9.4(5/2) synchronized tagged type 3.9.4(6/2) Synchronized_Queue_Interfaces child of Ada.Containers A.18.27(3/3) Synchronous_Barrier in Ada.Synchronous_Barriers D.10.1(5/3) Synchronous_Barriers child of Ada D.10.1(3/3) Synchronous_Task_Control child of Ada D.10(3/2) syntactic category 1.1.4(15) syntax complete listing P(1) cross reference P(1) notation 1.1.4(3) under Syntax heading 1.1.2(25) System 13.7(3/2) System.Address_To_Access_- Conversions 13.7.2(2) System.Multiprocessors.Dispatching_ Domains D.16.1(6/3) System_Name in System 13.7(4) systems programming C(1) T Tag in Ada.Tags 3.9(6/2) Tag attribute 3.9(16), 3.9(18) tag indeterminate 3.9.2(6/2) tag of an object 3.9(3) class-wide object 3.9(22) object created by an allocator 3.9(21) preserved by type conversion and parameter passing 3.9(25) returned by a function 3.9(23), 3.9(24/2) stand-alone object, component, or aggregate 3.9(20) Tag_Array in Ada.Tags 3.9(7.3/2) Tag_Check 11.5(18) [partial] 3.9.2(16), 4.6(42), 4.6(52), 5.2(10), 6.5(8.1/3) Tag_Error in Ada.Tags 3.9(8) tagged incomplete view 3.10.1(2.1/2) tagged type 3.9(2/2), N(39) protected 3.9.4(6/2) synchronized 3.9.4(6/2) task 3.9.4(6/2) Tags child of Ada 3.9(6/2) Tail in Ada.Strings.Bounded A.4.4(72), A.4.4(73) in Ada.Strings.Fixed A.4.3(37), A.4.3(38) in Ada.Strings.Unbounded A.4.5(67), A.4.5(68) tail (of a queue) D.2.1(5/2) tamper with cursors of a list A.18.3(62/2) of a map A.18.4(8/2) of a set A.18.7(8/2) of a tree A.18.10(81/3) of a vector A.18.2(91/2) Index 13 December 2012 912 tamper with elements of a holder A.18.18(30/3) of a list A.18.3(67/2) of a map A.18.4(13/2) of a set A.18.7(13/2) of a tree A.18.10(87/3) of a vector A.18.2(95/2) tampering prohibited for a holder A.18.18(35/3) prohibited for a list A.18.3(69.1/3) prohibited for a map A.18.4(15.1/3) prohibited for a set A.18.7(14.1/3) prohibited for a tree A.18.10(90/3) prohibited for a vector A.18.2(97.1/3) Tan in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(4) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(5) Tanh in Ada.Numerics.Generic_Complex_- Elementary_Functions G.1.2(6) in Ada.Numerics.Generic_Elementary_- Functions A.5.1(7) target of an assignment operation 5.2(3) of an assignment_statement 5.2(3) target object of a requeue_statement 9.5(7) of the name of an entry or a protected subprogram 9.5(2/3) target statement of a goto_statement 5.8(3) target subtype of a type_conversion 4.6(3) task 9(1/3) activation 9.2(1) completion 9.3(1) dependence 9.3(1) execution 9.2(1) termination 9.3(1) task declaration 9.1(1) task dispatching D.2.1(4/2) task dispatching point D.2.1(4/2) [partial] D.2.3(8/2), D.2.4(9/3) task dispatching policy D.2.2(7/2) [partial] D.2.1(5/2) EDF_Across_Priorities D.2.6(7/2) FIFO_Within_Priorities D.2.3(2/2) Non_Preemptive_FIFO_Within_- Priorities D.2.4(2/2) Round_Robin_Within_Priorities D.2.5(2/2) task interface 3.9.4(5/2) task priority D.1(15) task state abnormal 9.8(4) blocked 9(10) callable 9.9(2) held D.11(4/2) Ada Reference Manual — 2012 Edition Text_IO child of Ada A.10.1(2) Text_Streams child of Ada.Text_IO A.12.2(3) child of Ada.Wide_Text_IO A.12.3(3) child of Ada.Wide_Wide_Text_IO inactive 9(10) ready 9(10) terminated 9(10) task tagged type 3.9.4(6/2) task type N(40/2) task unit 9(9) Task_Array in Ada.Execution_Time.Group_Budgets D.14.2(6/2) Task_Attributes child of Ada C.7.2(2) task_body 9.1(6/3) used 3.11(6), P task_body_stub 10.1.3(5) used 10.1.3(2), P task_definition 9.1(4) used 9.1(2/3), 9.1(3/3), P Task_Dispatching_Policy pragma D.2.2(3), L(37) Task_Id in Ada.Task_Identification C.7.1(2/2) Task_Identification child of Ada C.7.1(2/2) task_item 9.1(5/1) used 9.1(4), P Task_Termination child of Ada C.7.3(2/2) task_type_declaration 9.1(2/3) used 3.2.1(3/3), P Tasking_Error raised by failure of run-time check 9.2(5), 9.5.3(21), 11.1(4), 13.11.2(13), 13.11.2(14), C.7.2(13), D.5.1(8), D.11(8) in Standard A.1(46) template 12(1) for a formal package 12.7(4) See generic unit 12(1) term 4.4(5) used 4.4(4), P terminal interrupt example 9.7.4(10) terminate_alternative 9.7.1(7) used 9.7.1(4), P terminated a task state 9(10) Terminated attribute 9.9(3) termination of a partition E.1(7) termination handler C.7.3(8/3) fall-back C.7.3(9/2) specific C.7.3(9/2) Termination_Handler in Ada.Task_Termination C.7.3(4/2) Terminator_Error in Interfaces.C B.3(40) tested type of a membership test 4.5.2(3/3) text of a program 2.2(1) A.12.4(3/2) throw (an exception) See raise 11(1/3) Thursday in Ada.Calendar.Formatting 9.6.1(17/2) tick 2.1(15/3) in Ada.Real_Time D.8(6) in System 13.7(10) Tilde in Ada.Characters.Latin_1 A.3.3(14) Time in Ada.Calendar 9.6(10) in Ada.Real_Time D.8(4) time base 9.6(6/3) time limit example 9.7.4(12) time type 9.6(6/3) Time-dependent Reset procedure of the random number generator A.5.2(34) time-out example 9.7.4(12) See asynchronous_select 9.7.4(12) See selective_accept 9.7.1(1) See timed_entry_call 9.7.2(1/2) Time_Error in Ada.Calendar 9.6(18) Time_First in Ada.Real_Time D.8(4) Time_Last in Ada.Real_Time D.8(4) Time_Of in Ada.Calendar 9.6(15) in Ada.Calendar.Formatting 9.6.1(30/2), 9.6.1(31/2) in Ada.Execution_Time D.14(9/2) in Ada.Real_Time D.8(16) Time_Of_Event in Ada.Real_Time.Timing_Events D.15(6/2) Time_Offset in Ada.Calendar.Time_Zones 9.6.1(4/2) Time_Remaining in Ada.Execution_Time.Timers D.14.1(8/2) Time_Span in Ada.Real_Time D.8(5) Time_Span_First in Ada.Real_Time D.8(5) Time_Span_Last in Ada.Real_Time D.8(5) 913 13 December 2012 Index Ada Reference Manual — 2012 Edition Time_Span_Unit in Ada.Real_Time D.8(5) Time_Span_Zero in Ada.Real_Time D.8(5) Time_Unit in Ada.Real_Time D.8(4) Time_Zones child of Ada.Calendar 9.6.1(2/2) timed_entry_call 9.7.2(2) used 9.7(2), P Timer in Ada.Execution_Time.Timers D.14.1(4/2) timer interrupt example 9.7.4(12) Timer_Handler in Ada.Execution_Time.Timers D.14.1(5/2) Timer_Resource_Error in Ada.Execution_Time.Timers D.14.1(9/2) Timers child of Ada.Execution_Time D.14.1(3/2) times operator 4.4(1/3), 4.5.5(1) timing See delay_statement 9.6(1) Timing_Event in Ada.Real_Time.Timing_Events D.15(4/2) Timing_Event_Handler in Ada.Real_Time.Timing_Events D.15(4/2) Timing_Events child of Ada.Real_Time D.15(3/2) To_Ada in Interfaces.C B.3(22), B.3(26), B.3(28), B.3(32), B.3(37), B.3(39), B.3(39.10/2), B.3(39.13/2), B.3(39.17/2), B.3(39.19/2), B.3(39.4/2), B.3(39.8/2) in Interfaces.COBOL B.4(17), B.4(19) in Interfaces.Fortran B.5(13), B.5(14), B.5(16) To_Address in System.Address_To_Access_- Conversions 13.7.2(3/3) in System.Storage_Elements 13.7.1(10/3) To_Basic in Ada.Characters.Handling A.3.2(6), A.3.2(7) To_Binary in Interfaces.COBOL B.4(45), B.4(48) To_Bounded_String in Ada.Strings.Bounded A.4.4(11) To_C in Interfaces.C B.3(21), B.3(25), B.3(27), B.3(32), B.3(36), B.3(38), B.3(39.13/2), B.3(39.16/2), B.3(39.18/2), B.3(39.4/2), B.3(39.7/2), B.3(39.9/2) To_Character in Ada.Characters.Conversions A.3.4(5/2) To_Chars_Ptr in Interfaces.C.Strings B.3.1(8) To_COBOL in Interfaces.COBOL B.4(17), B.4(18) To_Cursor in Ada.Containers.Vectors A.18.2(25/2) To_Decimal in Interfaces.COBOL B.4(35), B.4(40), To_Pointer in System.Address_To_Access_- Conversions 13.7.2(3/3) To_Range in Ada.Strings.Maps A.4.2(24) in Ada.Strings.Wide_Maps A.4.7(25) in Ada.Strings.Wide_Wide_Maps A.4.8(25/2) To_Ranges in Ada.Strings.Maps A.4.2(10) in Ada.Strings.Wide_Maps A.4.7(10) in Ada.Strings.Wide_Wide_Maps A.4.8(10/2) To_Sequence in Ada.Strings.Maps A.4.2(19) in Ada.Strings.Wide_Maps A.4.7(19) in Ada.Strings.Wide_Wide_Maps A.4.8(19/2) B.4(44), B.4(47) To_Display in Interfaces.COBOL B.4(36) To_Domain in Ada.Strings.Maps A.4.2(24) in Ada.Strings.Wide_Maps A.4.7(24) in Ada.Strings.Wide_Wide_Maps A.4.8(24/2) To_Duration in Ada.Real_Time D.8(13) To_Fortran in Interfaces.Fortran B.5(13), B.5(14), B.5(15) To_Holder in Ada.Containers.Indefinite_Holders A.18.18(9/3) To_Index in Ada.Containers.Vectors A.18.2(26/2) To_Integer in System.Storage_Elements 13.7.1(10/3) To_Set in Ada.Containers.Hashed_Sets A.18.8(9/2) in Ada.Containers.Ordered_Sets A.18.9(10/2) in Ada.Strings.Maps A.4.2(8), A.4.2(9), A.4.2(17), A.4.2(18) in Ada.Strings.Wide_Maps A.4.7(8), A.4.7(9), A.4.7(17), A.4.7(18) in Ada.Strings.Wide_Wide_Maps A.4.8(8/2), A.4.8(9/2), A.4.8(17/2), A.4.8(18/2) To_String in Ada.Characters.Conversions A.3.4(5/2) in Ada.Strings.Bounded A.4.4(12) in Ada.Strings.Unbounded A.4.5(11) To_Time_Span in Ada.Real_Time D.8(13) To_Unbounded_String in Ada.Strings.Unbounded A.4.5(9), A.4.5(10) To_ISO_646 in Ada.Characters.Handling A.3.2(11), To_Upper in Ada.Characters.Handling A.3.2(6), A.3.2(12) To_Long_Binary in Interfaces.COBOL B.4(48) To_Lower in Ada.Characters.Handling A.3.2(6), A.3.2(7) in Ada.Wide_Characters.Handling A.3.5(20/3), A.3.5(21/3) To_Mapping in Ada.Strings.Maps A.4.2(23) in Ada.Strings.Wide_Maps A.4.7(23) in Ada.Strings.Wide_Wide_Maps A.4.8(23/2) To_Packed in Interfaces.COBOL B.4(41) To_Picture in Ada.Text_IO.Editing F.3.3(6) A.3.2(7) in Ada.Wide_Characters.Handling A.3.5(20/3), A.3.5(21/3) To_Vector in Ada.Containers.Vectors A.18.2(13/2), A.18.2(14/2) To_Wide_Character in Ada.Characters.Conversions A.3.4(4/2), A.3.4(5/2) To_Wide_String in Ada.Characters.Conversions A.3.4(4/2), A.3.4(5/2) To_Wide_Wide_Character in Ada.Characters.Conversions A.3.4(4/2) To_Wide_Wide_String in Ada.Characters.Conversions A.3.4(4/2) Index 13 December 2012 914 Ada Reference Manual — 2012 Edition token See lexical element 2.2(1) Trailing_Nonseparate in Interfaces.COBOL B.4(23) Trailing_Separate in Interfaces.COBOL B.4(23) transfer of control 5.1(14/2) Translate in Ada.Strings.Bounded A.4.4(53), A.4.4(54), A.4.4(55), A.4.4(56) in Ada.Strings.Fixed A.4.3(18), A.4.3(19), A.4.3(20), A.4.3(21) in Ada.Strings.Unbounded A.4.5(48), A.4.5(49), A.4.5(50), A.4.5(51) Translation_Error in Ada.Strings A.4.1(5) Transpose in Ada.Numerics.Generic_Complex_- Arrays G.3.2(34/2) in Ada.Numerics.Generic_Real_Arrays G.3.1(17/2) Tree in Ada.Containers.Multiway_Trees A.18.10(8/3) Tree_Iterator_Interfaces in Ada.Containers.Multiway_Trees A.18.10(13/3) triggering_alternative 9.7.4(3) used 9.7.4(2), P triggering_statement 9.7.4(4/2) used 9.7.4(3), P Trim in Ada.Strings.Bounded A.4.4(67), A.4.4(68), A.4.4(69) in Ada.Strings.Fixed A.4.3(31), A.4.3(32), A.4.3(33), A.4.3(34) in Ada.Strings.Unbounded A.4.5(61), A.4.5(62), A.4.5(63), A.4.5(64) Trim_End in Ada.Strings A.4.1(6) True 3.5.3(1) Truncation in Ada.Strings A.4.1(6) Truncation attribute A.5.3(42) Tuesday in Ada.Calendar.Formatting 9.6.1(17/2) two's complement modular types 3.5.4(29) type 3.2(1), N(41/2) abstract 3.9.3(1.2/2) needs finalization 7.6(9.1/2) of a subtype 3.2(8/2) synchronized tagged 3.9.4(6/2) See also tag 3.9(3) See also language-defined types type conformance 6.3.1(15/2) [partial] 3.4(17/2), 8.3(8), 8.3(26/2), 10.1.4(4/3) required 3.11.1(5), 4.1.4(14/2), 8.6(26), 9.1(9.2/3), 9.1(9.5/3), 9.4(11.1/3), 9.4(11.4/3), 9.5.4(3/3), 12.4(5/2) type conversion 4.6(1/3) access 4.6(24.11/2), 4.6(24.18/2), 4.6(24.19/2), 4.6(47) arbitrary order 1.1.4(18) array 4.6(24.2/2), 4.6(36) composite (non-array) 4.6(21/3), 4.6(40) enumeration 4.6(21.1/2), 4.6(34) numeric 4.6(24.1/2), 4.6(29) unchecked 13.9(1) See also qualified_expression 4.7(1) type conversion, implicit See implicit subtype conversion 4.6(1/3) type extension 3.9(2/2), 3.9.1(1/2) type of a discrete_range 3.6.1(4) type of a range 3.5(4) type parameter See discriminant 3.7(1/2) type profile See profile, type conformant 6.3.1(15/2) type resolution rules 8.6(20/2) if any type in a specified class of types is expected 8.6(21) if expected type is specific 8.6(22) if expected type is universal or class- wide 8.6(21) type tag See tag 3.9(3) type-related aspect 13.1(8.1/3) aspect 13.1(8/3) operational item 13.1(8.1/3) representation item 13.1(8/3) type_conversion 4.6(2) used 4.1(2/3), P See also unchecked type conversion 13.9(1) type_declaration 3.2.1(2) used 3.1(3/3), P type_definition 3.2.1(4/2) used 3.2.1(3/3), P Type_Invariant aspect 7.3.2(2/3) Type_Invariant'Class aspect 7.3.2(3/3) Type_Set in Ada.Text_IO A.10.1(7) types of a profile 6.1(29) U UC_A_Acute in Ada.Characters.Latin_1 A.3.3(23) UC_A_Circumflex in Ada.Characters.Latin_1 A.3.3(23) UC_A_Diaeresis in Ada.Characters.Latin_1 A.3.3(23) UC_A_Grave in Ada.Characters.Latin_1 A.3.3(23) UC_A_Ring in Ada.Characters.Latin_1 A.3.3(23) UC_A_Tilde in Ada.Characters.Latin_1 A.3.3(23) UC_AE_Diphthong in Ada.Characters.Latin_1 A.3.3(23) UC_C_Cedilla in Ada.Characters.Latin_1 A.3.3(23) UC_E_Acute in Ada.Characters.Latin_1 A.3.3(23) UC_E_Circumflex in Ada.Characters.Latin_1 A.3.3(23) UC_E_Diaeresis in Ada.Characters.Latin_1 A.3.3(23) UC_E_Grave in Ada.Characters.Latin_1 A.3.3(23) UC_I_Acute in Ada.Characters.Latin_1 A.3.3(23) UC_I_Circumflex in Ada.Characters.Latin_1 A.3.3(23) UC_I_Diaeresis in Ada.Characters.Latin_1 A.3.3(23) UC_I_Grave in Ada.Characters.Latin_1 A.3.3(23) UC_Icelandic_Eth in Ada.Characters.Latin_1 A.3.3(24) UC_Icelandic_Thorn in Ada.Characters.Latin_1 A.3.3(24) UC_N_Tilde in Ada.Characters.Latin_1 A.3.3(24) UC_O_Acute in Ada.Characters.Latin_1 A.3.3(24) UC_O_Circumflex in Ada.Characters.Latin_1 A.3.3(24) UC_O_Diaeresis in Ada.Characters.Latin_1 A.3.3(24) UC_O_Grave in Ada.Characters.Latin_1 A.3.3(24) UC_O_Oblique_Stroke in Ada.Characters.Latin_1 A.3.3(24) UC_O_Tilde in Ada.Characters.Latin_1 A.3.3(24) UC_U_Acute in Ada.Characters.Latin_1 A.3.3(24) UC_U_Circumflex in Ada.Characters.Latin_1 A.3.3(24) UC_U_Diaeresis in Ada.Characters.Latin_1 A.3.3(24) UC_U_Grave in Ada.Characters.Latin_1 A.3.3(24) UC_Y_Acute in Ada.Characters.Latin_1 A.3.3(24) UCHAR_MAX in Interfaces.C B.3(6) ultimate ancestor of a type 3.4.1(10/2) 915 13 December 2012 Index Ada Reference Manual — 2012 Edition unary adding operator 4.5.4(1) unary operator 4.5(9) unary_adding_operator 4.5(5) used 4.4(4), P Unbiased_Rounding attribute A.5.3(39) Unbounded child of Ada.Strings A.4.5(3) in Ada.Text_IO A.10.1(5) Unbounded_IO child of Ada.Text_IO A.10.12(3/2) child of Ada.Wide_Text_IO A.11(5/3) child of Ada.Wide_Wide_Text_IO A.11(5/3) Unbounded_Priority_Queues child of Ada.Containers A.18.30(2/3) Unbounded_Slice in Ada.Strings.Unbounded union C B.3.3(1/3) in Ada.Containers.Hashed_Sets A.18.8(26/2), A.18.8(27/2) in Ada.Containers.Ordered_Sets A.18.9(27/2), A.18.9(28/2) unit consistency E.3(6) unit matrix complex matrix G.3.2(148/2) real matrix G.3.1(80/2) unit vector complex vector G.3.2(90/2) real vector G.3.1(48/2) Unit_Matrix in Ada.Numerics.Generic_Complex_- Arrays G.3.2(51/2) A.4.5(22.1/2), A.4.5(22.2/2) G.3.1(29/2) in Ada.Numerics.Generic_Real_Arrays Unit_Vector in Ada.Numerics.Generic_Complex_- Arrays G.3.2(24/2) in Ada.Numerics.Generic_Real_Arrays G.3.1(14/2) universal type 3.4.1(6/2) universal_access [partial] 3.4.1(6/2), 4.2(8/2) universal_fixed [partial] 3.4.1(6/2), 3.5.6(4) universal_integer [partial] 3.4.1(6/2), 3.5.4(14), 3.5.4(30), 4.2(8/2) universal_real [partial] 3.4.1(6/2), 3.5.6(4), 4.2(8/2) unknown discriminants 3.7(26) unknown_discriminant_part 3.7(3) used 3.7(2/2), P Unknown_Zone_Error in Ada.Calendar.Time_Zones 9.6.1(5/2) unmarshalling E.4(9) unpolluted 13.13.1(2) unsigned in Interfaces.C B.3(9) in Interfaces.COBOL B.4(23) unsigned type See modular type 3.5.4(1) unsigned_char in Interfaces.C B.3(10) unsigned_long in Interfaces.C B.3(9) unsigned_short in Interfaces.C B.3(9) unspecified 1.1.3(18) Unbounded_String in Ada.Strings.Unbounded A.4.5(4/2) Unbounded_Synchronized_Queues child of Ada.Containers A.18.28(2/3) unchecked storage deallocation 13.11.2(1) unchecked type conversion 13.9(1) unchecked union object B.3.3(6/3) unchecked union subtype B.3.3(6/3) unchecked union type B.3.3(6/3) Unchecked_Access attribute 13.10(3), H.4(18) See also Access attribute 3.10.2(24/1) Unchecked_Conversion child of Ada 13.9(3/3) Unchecked_Deallocation child of Ada 13.11.2(3/3) Unchecked_Union aspect B.3.3(3.2/3) Unchecked_Union pragma J.15.6(2/3), L(37.2/3) unconstrained 3.2(9) object 3.3.1(9/2) object 6.4.1(16) subtype 3.2(9), 3.4(6), 3.5(7), 3.5.1(10), 3.5.4(9), 3.5.4(10), 3.5.7(11), 3.5.9(13), 3.5.9(16), 3.6(15), 3.6(16), 3.7(26), 3.9(15) subtype 3.10(14/3) subtype K.2(33) unconstrained_array_definition 3.6(3) used 3.6(2), P undefined result 11.6(5) underline 2.1(15/3) used 2.4.1(3), 2.4.2(4), P Uniformly_Distributed subtype of Float in Ada.Numerics.Float_Random A.5.2(8) uninitialized allocator 4.8(4) uninitialized variables 13.9.1(2) [partial] 3.3.1(21/3) [partial] 2.1(5/3), 3.9(4/2), 3.9(12.5/3), 4.5.2(13), 4.5.2(24.2/1), 4.5.5(21), 6.1.1(34/3), 6.1.1(35/3), 6.2(11/3), 7.2(5/3), 7.6(17.4/3), 9.8(14), 9.10(1/3), 10.2(26), 11.1(6), 11.4.1(10.1/3), 11.5(27/2), 13.1(18), 13.7.2(5/2), 13.9.1(7), 13.11(20), 13.11(21.6/3), 13.13.2(36/2), A.1(1/3), A.5.1(34), A.5.2(28), A.5.2(34), A.5.3(41.3/2), A.7(6), A.10(8), A.10.7(8/3), A.10.7(12/3), A.10.7(17.3/2), A.10.7(19), A.14(1), A.18.2(231/3), A.18.2(252/2), A.18.2(83/2), A.18.3(145/3), A.18.3(157/2), A.18.3(55/2), A.18.4(3/2), A.18.4(80/2), A.18.5(43/2), A.18.5(44/2), A.18.5(45/2), A.18.5(46/2), A.18.6(56/3), A.18.6(57/2), A.18.7(3/2), A.18.7(101/2), A.18.7(87/2), A.18.7(88/2), A.18.8(65/2), A.18.8(66.1/3), A.18.8(66/2), A.18.8(67/2), A.18.8(68/2), A.18.8(86/2), A.18.8(87/2), A.18.9(114/2), A.18.9(79.1/3), A.18.9(79/3), A.18.9(80/2), A.18.10(227/3), A.18.10(72/3), A.18.26(5/3), A.18.26(9.4/3), A.18.26(9/3), D.2.2(7.1/2), D.8(19), E.3(5/1), G.1.1(40), G.1.2(33), G.1.2(48), H(4.1), H.2(1), K.2(136.4/2) Unsuppress pragma 11.5(4.1/2), L(37.3/2) update the value of an object 3.3(14) in Interfaces.C.Strings B.3.1(18), B.3.1(19) Update_Element in Ada.Containers.Doubly_Linked_- Lists A.18.3(17/2) in Ada.Containers.Hashed_Maps A.18.5(17/2) in Ada.Containers.Indefinite_Holders A.18.18(15/3) in Ada.Containers.Multiway_Trees A.18.10(27/3) in Ada.Containers.Ordered_Maps A.18.6(16/2) in Ada.Containers.Vectors A.18.2(33/2), A.18.2(34/2) Update_Element_Preserving_Key in Ada.Containers.Hashed_Sets A.18.8(58/2) in Ada.Containers.Ordered_Sets A.18.9(73/2) Update_Error in Interfaces.C.Strings B.3.1(20) upper bound of a range 3.5(4) Index 13 December 2012 916 Ada Reference Manual — 2012 Edition upper-case letter a category of Character A.3.2(26) Upper_Case_Map in Ada.Strings.Maps.Constants A.4.6(5) Value in Ada.Calendar.Formatting 9.6.1(36/2), 9.6.1(38/2) in Ada.Environment_Variables A.17(4.1/3), A.17(4/2) visible 8.3(2), 8.3(14) aspect_specification 8.3(23.1/3) attribute_definition_clause 8.3(23.1/3) within a pragma in a context_clause 10.1.6(3) Upper_Set in Ada.Strings.Maps.Constants in Ada.Numerics.Discrete_Random within a pragma that appears at the place A.5.2(26) of a compilation unit 10.1.6(5) A.4.6(4) in Ada.Numerics.Float_Random within a use_clause in a context_clause US in Ada.Characters.Latin_1 A.3.3(6) usage name 3.1(10) use-visible 8.3(4), 8.4(9) use_clause 8.4(2) used 3.11(4/1), 10.1.2(3), 12.1(5), P Use_Error in Ada.Direct_IO A.8.4(18) in Ada.Directories A.16(43/2) in Ada.IO_Exceptions A.13(4) in Ada.Sequential_IO A.8.1(15) in Ada.Streams.Stream_IO A.12.1(26) in Ada.Text_IO A.10.1(85) use_package_clause 8.4(3) used 8.4(2), P use_type_clause 8.4(4/3) used 8.4(2), P user-defined assignment 7.6(1) user-defined heap management 13.11(1) user-defined operator 6.6(1) user-defined storage management 13.11(1) UTC_Time_Offset in Ada.Calendar.Time_Zones 9.6.1(6/2) UTF-16 A.4.11(46/3) UTF-8 A.4.11(46/3) UTF_16_Wide_String subtype of Wide_String A.4.11(7/3) UTF_8_String subtype of String in Ada.Strings.UTF_Encoding A.4.11(6/3) UTF_Encoding child of Ada.Strings A.4.11(3/3) UTF_String subtype of String in Ada.Strings.UTF_Encoding A.4.11(5/3) V Val attribute 3.5.5(5) Valid in Ada.Text_IO.Editing F.3.3(5), F.3.3(12) in Interfaces.COBOL B.4(33), B.4(38), B.4(43) Valid attribute 13.9.2(3/3), H(6) A.5.2(14) 10.1.6(3) in Ada.Strings.Maps A.4.2(21) in Ada.Strings.Wide_Maps A.4.7(21) in Ada.Strings.Wide_Wide_Maps A.4.8(21/2) in Ada.Task_Attributes C.7.2(4) in Interfaces.C.Pointers B.3.2(6), B.3.2(7) in Interfaces.C.Strings B.3.1(13), B.3.1(14), B.3.1(15), B.3.1(16) Value attribute 3.5(52) value conversion 4.6(5/2) values belonging to a subtype 3.2(8/2) variable 3.3(13/3) variable indexing 4.1.6(16/3) variable object 3.3(13/3) variable view 3.3(13/3) Variable_Indexing aspect 4.1.6(3/3) variant 3.8.1(3) used 3.8.1(2), P See also tagged type 3.9(1) variant_part 3.8.1(2) used 3.8(4), P Vector in Ada.Containers.Vectors A.18.2(8/3) vector container A.18.2(1/2) Vector_Iterator_Interfaces in Ada.Containers.Vectors Vectors child of Ada.Containers A.18.2(6/3) version of a compilation unit E.3(5/1) Version attribute E.3(3) vertical line 2.1(15/3) Vertical_Line in Ada.Characters.Latin_1 A.3.3(14) view 3.1(7), N(42/2) of a subtype (implied) 3.1(7.1/3) of a type (implied) 3.1(7.1/3) of an object (implied) 3.1(7.1/3) view conversion 4.6(5/2) virtual function See dispatching subprogram 3.9.2(1/2) Virtual_Length in Interfaces.C.Pointers B.3.2(13) visibility direct 8.3(2), 8.3(21) immediate 8.3(4), 8.3(21) use clause 8.3(4), 8.4(9) visibility rules 8.3(1) within a with_clause 10.1.6(2/2) within the parent_unit_name of a library unit 10.1.6(2/2) within the parent_unit_name of a subunit 10.1.6(4) visible part 8.2(5) of a formal package 12.7(10/2) of a generic unit 8.2(8) of a package (other than a generic formal package) 7.1(6/2) of a protected unit 9.4(11/2) of a task unit 9.1(9) of a view of a callable entity 8.2(6) of a view of a composite type 8.2(7) volatile C.6(8/3) Volatile aspect C.6(6.4/3) Volatile pragma J.15.8(3/3), L(38.1/3) Volatile_Components aspect C.6(6.7/3) Volatile_Components pragma J.15.8(6/3), L(39.1/3) VT in Ada.Characters.Latin_1 A.3.3(5) VTS in Ada.Characters.Latin_1 A.3.3(17) W Wait_For_Release in Ada.Synchronous_Barriers D.10.1(6/3) wchar_array in Interfaces.C B.3(33/3) wchar_t in Interfaces.C B.3(30/1) Wednesday in Ada.Calendar.Formatting 9.6.1(17/2) well-formed picture String for edited output F.3.1(1/3) Wide_Bounded child of Ada.Strings A.4.7(1/3) Wide_Character 3.5.2(3/3) in Standard A.1(36.1/3) Wide_Character_Mapping in Ada.Strings.Wide_Maps A.4.7(20/2) Wide_Character_Mapping_Function in Ada.Strings.Wide_Maps A.4.7(26) Wide_Character_Range in Ada.Strings.Wide_Maps A.4.7(6) Wide_Character_Ranges in Ada.Strings.Wide_Maps A.4.7(7) in Ada.Strings.UTF_Encoding A.18.2(11.2/3) 917 13 December 2012 Index Ada Reference Manual — 2012 Edition Wide_Character_Sequence subtype of Wide_String in Ada.Strings.Wide_Maps A.4.7(16) Wide_Character_Set in Ada.Strings.Wide_Maps A.4.7(4/2) in Ada.Strings.Wide_Maps.Wide_- Wide_Wide_Bounded child of Ada.Strings A.4.8(1/3) Wide_Wide_Character 3.5.2(4/3) in Standard A.1(36.2/3) Wide_Wide_Character_Mapping in Ada.Strings.Wide_Wide_Maps Constants A.4.8(48/2) A.4.8(20/2) Wide_Characters child of Ada A.3.1(4/2) Wide_Constants child of Ada.Strings.Wide_Maps A.4.7(1/3), A.4.8(28/2) Wide_Equal_Case_Insensitive child of Ada.Strings A.4.7(1/3) child of Ada.Strings.Wide_Bounded A.4.7(1/3) Wide_Wide_Character_Mapping_Functio n in Ada.Strings.Wide_Wide_Maps A.4.8(26/2) Wide_Wide_Character_Range in Ada.Strings.Wide_Wide_Maps A.4.8(6/2) Wide_Wide_Character_Ranges in Ada.Strings.Wide_Wide_Maps child of Ada.Strings.Wide_Fixed A.4.8(7/2) A.4.7(1/3) Wide_Wide_Character_Sequence subtype child of Ada.Strings.Wide_Unbounded of Wide_Wide_String A.4.7(1/3) in Ada.Strings.Wide_Wide_Maps Wide_Exception_Name in Ada.Exceptions 11.4.1(2/2), 11.4.1(5/2) Wide_Expanded_Name in Ada.Tags 3.9(7/2) Wide_Fixed child of Ada.Strings A.4.7(1/3) Wide_Hash child of Ada.Strings A.4.7(1/3) child of Ada.Strings.Wide_Bounded A.4.7(1/3) child of Ada.Strings.Wide_Fixed A.4.7(1/3) A.4.8(16/2) Wide_Wide_Character_Set in Ada.Strings.Wide_Wide_Maps A.4.8(4/2) Wide_Wide_Characters child of Ada A.3.1(6/2) Wide_Wide_Constants child of Ada.Strings.Wide_Wide_Maps A.4.8(1/3) Wide_Wide_Equal_Case_Insensitive child of Ada.Strings A.4.8(1/3) child of Ada.Strings.Wide_Wide_- Bounded A.4.8(1/3) Wide_Wide_Image attribute 3.5(27.1/2) Wide_Wide_Maps child of Ada.Strings A.4.8(3/2) Wide_Wide_Space in Ada.Strings A.4.1(4/2) Wide_Wide_String in Standard A.1(42.1/3) Wide_Wide_Strings child of Ada.Strings.UTF_Encoding A.4.11(38/3) Wide_Wide_Text_IO child of Ada A.11(3/2) Wide_Wide_Unbounded child of Ada.Strings A.4.8(1/3) Wide_Wide_Value attribute 3.5(39.1/2) Wide_Wide_Width attribute 3.5(37.1/2) Wide_Width attribute 3.5(38) Width attribute 3.5(39) with_clause 10.1.2(4/2) mentioned in 10.1.2(6/2) named in 10.1.2(6/2) used 10.1.2(3), P within immediately 8.1(13) word 13.3(8) Word_Size in System 13.7(13) Write in Ada.Direct_IO A.8.4(13) in Ada.Sequential_IO A.8.1(12) in Ada.Storage_IO A.9(7) in Ada.Streams 13.13.1(6) in Ada.Streams.Stream_IO A.12.1(18), child of Ada.Strings.Wide_Unbounded child of Ada.Strings.Wide_Wide_Fixed A.12.1(19) A.4.7(1/3) A.4.8(1/3) Wide_Hash_Case_Insensitive child of Ada.Strings A.4.7(1/3) child of Ada.Strings.Wide_Bounded A.4.7(1/3) child of Ada.Strings.Wide_Wide_- Unbounded A.4.8(1/3) Wide_Wide_Exception_Name in Ada.Exceptions 11.4.1(2/2), child of Ada.Strings.Wide_Fixed 11.4.1(5/2) A.4.7(1/3) child of Ada.Strings.Wide_Unbounded A.4.7(1/3) Wide_Image attribute 3.5(28) Wide_Maps child of Ada.Strings A.4.7(3) wide_nul in Interfaces.C B.3(31/1) Wide_Space in Ada.Strings A.4.1(4/2) Wide_String in Standard A.1(41/3) Wide_Strings child of Ada.Strings.UTF_Encoding A.4.11(30/3) Wide_Text_IO child of Ada A.11(2/2) Wide_Unbounded child of Ada.Strings A.4.7(1/3) Wide_Value attribute 3.5(40) Wide_Wide_Expanded_Name in Ada.Tags 3.9(7/2) Wide_Wide_Fixed child of Ada.Strings A.4.8(1/3) Wide_Wide_Hash child of Ada.Strings A.4.8(1/3) child of Ada.Strings.Wide_Wide_- Bounded A.4.8(1/3) A.4.8(1/3) child of Ada.Strings.Wide_Wide_- Unbounded A.4.8(1/3) Wide_Wide_Hash_Case_Insensitive child of Ada.Strings A.4.8(1/3) child of Ada.Strings.Wide_Wide_- Bounded A.4.8(1/3) in System.RPC E.5(8) Write aspect 13.13.2(38/3) Write attribute 13.13.2(3), 13.13.2(11) Write clause 13.3(7/2), 13.13.2(38/3) X xor operator 4.4(1/3), 4.5.1(2) Y Year in Ada.Calendar 9.6(13) in Ada.Calendar.Formatting Year_Number subtype of Integer in Ada.Calendar 9.6(11/2) Yen_Sign in Ada.Characters.Latin_1 A.3.3(21/3) Yield in Ada.Dispatching D.2.1(1.3/3) Yield_To_Higher in Ada.Dispatching.Non_Preemptive child of Ada.Strings.Wide_Wide_Fixed A.4.8(1/3) D.2.4(2.2/3) child of Ada.Strings.Wide_Wide_- Unbounded A.4.8(1/3) child of Ada.Strings.Wide_Wide_Fixed 9.6.1(21/2) Index 13 December 2012 918 Yield_To_Same_Or_Higher in Ada.Dispatching.Non_Preemptive D.2.4(2.2/3) Ada Reference Manual — 2012 Edition 919 13 December 2012 Index