organized_contracts/31/310b146027d0f8e84a210ae9e3f266dde0a022568c535c275b7b9d209fa88a11/contract.json

{
  "language": "Solidity",
  "sources": {
    "@chiru-labs/erc721a/contracts/ERC721A.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.3\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\nimport './IERC721A.sol';\n\n/**\n * @dev Interface of ERC721 token receiver.\n */\ninterface ERC721A__IERC721Receiver {\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n/**\n * @title ERC721A\n *\n * @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)\n * Non-Fungible Token Standard, including the Metadata extension.\n * Optimized for lower gas during batch mints.\n *\n * Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)\n * starting from `_startTokenId()`.\n *\n * Assumptions:\n *\n * - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.\n * - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).\n */\ncontract ERC721A is IERC721A {\n    // Bypass for a `--via-ir` bug (https://github.com/chiru-labs/ERC721A/pull/364).\n    struct TokenApprovalRef {\n        address value;\n    }\n\n    // =============================================================\n    //                           CONSTANTS\n    // =============================================================\n\n    // Mask of an entry in packed address data.\n    uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;\n\n    // The bit position of `numberMinted` in packed address data.\n    uint256 private constant _BITPOS_NUMBER_MINTED = 64;\n\n    // The bit position of `numberBurned` in packed address data.\n    uint256 private constant _BITPOS_NUMBER_BURNED = 128;\n\n    // The bit position of `aux` in packed address data.\n    uint256 private constant _BITPOS_AUX = 192;\n\n    // Mask of all 256 bits in packed address data except the 64 bits for `aux`.\n    uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;\n\n    // The bit position of `startTimestamp` in packed ownership.\n    uint256 private constant _BITPOS_START_TIMESTAMP = 160;\n\n    // The bit mask of the `burned` bit in packed ownership.\n    uint256 private constant _BITMASK_BURNED = 1 << 224;\n\n    // The bit position of the `nextInitialized` bit in packed ownership.\n    uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;\n\n    // The bit mask of the `nextInitialized` bit in packed ownership.\n    uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;\n\n    // The bit position of `extraData` in packed ownership.\n    uint256 private constant _BITPOS_EXTRA_DATA = 232;\n\n    // Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.\n    uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;\n\n    // The mask of the lower 160 bits for addresses.\n    uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;\n\n    // The maximum `quantity` that can be minted with {_mintERC2309}.\n    // This limit is to prevent overflows on the address data entries.\n    // For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}\n    // is required to cause an overflow, which is unrealistic.\n    uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;\n\n    // The `Transfer` event signature is given by:\n    // `keccak256(bytes(\"Transfer(address,address,uint256)\"))`.\n    bytes32 private constant _TRANSFER_EVENT_SIGNATURE =\n        0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;\n\n    // =============================================================\n    //                            STORAGE\n    // =============================================================\n\n    // The next token ID to be minted.\n    uint256 private _currentIndex;\n\n    // The number of tokens burned.\n    uint256 private _burnCounter;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    // Mapping from token ID to ownership details\n    // An empty struct value does not necessarily mean the token is unowned.\n    // See {_packedOwnershipOf} implementation for details.\n    //\n    // Bits Layout:\n    // - [0..159]   `addr`\n    // - [160..223] `startTimestamp`\n    // - [224]      `burned`\n    // - [225]      `nextInitialized`\n    // - [232..255] `extraData`\n    mapping(uint256 => uint256) private _packedOwnerships;\n\n    // Mapping owner address to address data.\n    //\n    // Bits Layout:\n    // - [0..63]    `balance`\n    // - [64..127]  `numberMinted`\n    // - [128..191] `numberBurned`\n    // - [192..255] `aux`\n    mapping(address => uint256) private _packedAddressData;\n\n    // Mapping from token ID to approved address.\n    mapping(uint256 => TokenApprovalRef) private _tokenApprovals;\n\n    // Mapping from owner to operator approvals\n    mapping(address => mapping(address => bool)) private _operatorApprovals;\n\n    // =============================================================\n    //                          CONSTRUCTOR\n    // =============================================================\n\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n        _currentIndex = _startTokenId();\n    }\n\n    // =============================================================\n    //                   TOKEN COUNTING OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Returns the starting token ID.\n     * To change the starting token ID, please override this function.\n     */\n    function _startTokenId() internal view virtual returns (uint256) {\n        return 0;\n    }\n\n    /**\n     * @dev Returns the next token ID to be minted.\n     */\n    function _nextTokenId() internal view virtual returns (uint256) {\n        return _currentIndex;\n    }\n\n    /**\n     * @dev Returns the total number of tokens in existence.\n     * Burned tokens will reduce the count.\n     * To get the total number of tokens minted, please see {_totalMinted}.\n     */\n    function totalSupply() public view virtual override returns (uint256) {\n        // Counter underflow is impossible as _burnCounter cannot be incremented\n        // more than `_currentIndex - _startTokenId()` times.\n        unchecked {\n            return _currentIndex - _burnCounter - _startTokenId();\n        }\n    }\n\n    /**\n     * @dev Returns the total amount of tokens minted in the contract.\n     */\n    function _totalMinted() internal view virtual returns (uint256) {\n        // Counter underflow is impossible as `_currentIndex` does not decrement,\n        // and it is initialized to `_startTokenId()`.\n        unchecked {\n            return _currentIndex - _startTokenId();\n        }\n    }\n\n    /**\n     * @dev Returns the total number of tokens burned.\n     */\n    function _totalBurned() internal view virtual returns (uint256) {\n        return _burnCounter;\n    }\n\n    // =============================================================\n    //                    ADDRESS DATA OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Returns the number of tokens in `owner`'s account.\n     */\n    function balanceOf(address owner) public view virtual override returns (uint256) {\n        if (owner == address(0)) revert BalanceQueryForZeroAddress();\n        return _packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;\n    }\n\n    /**\n     * Returns the number of tokens minted by `owner`.\n     */\n    function _numberMinted(address owner) internal view returns (uint256) {\n        return (_packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;\n    }\n\n    /**\n     * Returns the number of tokens burned by or on behalf of `owner`.\n     */\n    function _numberBurned(address owner) internal view returns (uint256) {\n        return (_packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;\n    }\n\n    /**\n     * Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).\n     */\n    function _getAux(address owner) internal view returns (uint64) {\n        return uint64(_packedAddressData[owner] >> _BITPOS_AUX);\n    }\n\n    /**\n     * Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).\n     * If there are multiple variables, please pack them into a uint64.\n     */\n    function _setAux(address owner, uint64 aux) internal virtual {\n        uint256 packed = _packedAddressData[owner];\n        uint256 auxCasted;\n        // Cast `aux` with assembly to avoid redundant masking.\n        assembly {\n            auxCasted := aux\n        }\n        packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);\n        _packedAddressData[owner] = packed;\n    }\n\n    // =============================================================\n    //                            IERC165\n    // =============================================================\n\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n        // The interface IDs are constants representing the first 4 bytes\n        // of the XOR of all function selectors in the interface.\n        // See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)\n        // (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)\n        return\n            interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.\n            interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.\n            interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.\n    }\n\n    // =============================================================\n    //                        IERC721Metadata\n    // =============================================================\n\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() public view virtual override returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() public view virtual override returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {\n        if (!_exists(tokenId)) revert URIQueryForNonexistentToken();\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, it can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return '';\n    }\n\n    // =============================================================\n    //                     OWNERSHIPS OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) public view virtual override returns (address) {\n        return address(uint160(_packedOwnershipOf(tokenId)));\n    }\n\n    /**\n     * @dev Gas spent here starts off proportional to the maximum mint batch size.\n     * It gradually moves to O(1) as tokens get transferred around over time.\n     */\n    function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {\n        return _unpackedOwnership(_packedOwnershipOf(tokenId));\n    }\n\n    /**\n     * @dev Returns the unpacked `TokenOwnership` struct at `index`.\n     */\n    function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {\n        return _unpackedOwnership(_packedOwnerships[index]);\n    }\n\n    /**\n     * @dev Initializes the ownership slot minted at `index` for efficiency purposes.\n     */\n    function _initializeOwnershipAt(uint256 index) internal virtual {\n        if (_packedOwnerships[index] == 0) {\n            _packedOwnerships[index] = _packedOwnershipOf(index);\n        }\n    }\n\n    /**\n     * Returns the packed ownership data of `tokenId`.\n     */\n    function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {\n        uint256 curr = tokenId;\n\n        unchecked {\n            if (_startTokenId() <= curr)\n                if (curr < _currentIndex) {\n                    uint256 packed = _packedOwnerships[curr];\n                    // If not burned.\n                    if (packed & _BITMASK_BURNED == 0) {\n                        // Invariant:\n                        // There will always be an initialized ownership slot\n                        // (i.e. `ownership.addr != address(0) && ownership.burned == false`)\n                        // before an unintialized ownership slot\n                        // (i.e. `ownership.addr == address(0) && ownership.burned == false`)\n                        // Hence, `curr` will not underflow.\n                        //\n                        // We can directly compare the packed value.\n                        // If the address is zero, packed will be zero.\n                        while (packed == 0) {\n                            packed = _packedOwnerships[--curr];\n                        }\n                        return packed;\n                    }\n                }\n        }\n        revert OwnerQueryForNonexistentToken();\n    }\n\n    /**\n     * @dev Returns the unpacked `TokenOwnership` struct from `packed`.\n     */\n    function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {\n        ownership.addr = address(uint160(packed));\n        ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);\n        ownership.burned = packed & _BITMASK_BURNED != 0;\n        ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);\n    }\n\n    /**\n     * @dev Packs ownership data into a single uint256.\n     */\n    function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {\n        assembly {\n            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.\n            owner := and(owner, _BITMASK_ADDRESS)\n            // `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.\n            result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))\n        }\n    }\n\n    /**\n     * @dev Returns the `nextInitialized` flag set if `quantity` equals 1.\n     */\n    function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {\n        // For branchless setting of the `nextInitialized` flag.\n        assembly {\n            // `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.\n            result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))\n        }\n    }\n\n    // =============================================================\n    //                      APPROVAL OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the\n     * zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) public payable virtual override {\n        address owner = ownerOf(tokenId);\n\n        if (_msgSenderERC721A() != owner)\n            if (!isApprovedForAll(owner, _msgSenderERC721A())) {\n                revert ApprovalCallerNotOwnerNorApproved();\n            }\n\n        _tokenApprovals[tokenId].value = to;\n        emit Approval(owner, to, tokenId);\n    }\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) public view virtual override returns (address) {\n        if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();\n\n        return _tokenApprovals[tokenId].value;\n    }\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom}\n     * for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the caller.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual override {\n        _operatorApprovals[_msgSenderERC721A()][operator] = approved;\n        emit ApprovalForAll(_msgSenderERC721A(), operator, approved);\n    }\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev Returns whether `tokenId` exists.\n     *\n     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.\n     *\n     * Tokens start existing when they are minted. See {_mint}.\n     */\n    function _exists(uint256 tokenId) internal view virtual returns (bool) {\n        return\n            _startTokenId() <= tokenId &&\n            tokenId < _currentIndex && // If within bounds,\n            _packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.\n    }\n\n    /**\n     * @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.\n     */\n    function _isSenderApprovedOrOwner(\n        address approvedAddress,\n        address owner,\n        address msgSender\n    ) private pure returns (bool result) {\n        assembly {\n            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.\n            owner := and(owner, _BITMASK_ADDRESS)\n            // Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.\n            msgSender := and(msgSender, _BITMASK_ADDRESS)\n            // `msgSender == owner || msgSender == approvedAddress`.\n            result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))\n        }\n    }\n\n    /**\n     * @dev Returns the storage slot and value for the approved address of `tokenId`.\n     */\n    function _getApprovedSlotAndAddress(uint256 tokenId)\n        private\n        view\n        returns (uint256 approvedAddressSlot, address approvedAddress)\n    {\n        TokenApprovalRef storage tokenApproval = _tokenApprovals[tokenId];\n        // The following is equivalent to `approvedAddress = _tokenApprovals[tokenId].value`.\n        assembly {\n            approvedAddressSlot := tokenApproval.slot\n            approvedAddress := sload(approvedAddressSlot)\n        }\n    }\n\n    // =============================================================\n    //                      TRANSFER OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token\n     * by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(\n        address from,\n        address to,\n        uint256 tokenId\n    ) public payable virtual override {\n        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);\n\n        if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();\n\n        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);\n\n        // The nested ifs save around 20+ gas over a compound boolean condition.\n        if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))\n            if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();\n\n        if (to == address(0)) revert TransferToZeroAddress();\n\n        _beforeTokenTransfers(from, to, tokenId, 1);\n\n        // Clear approvals from the previous owner.\n        assembly {\n            if approvedAddress {\n                // This is equivalent to `delete _tokenApprovals[tokenId]`.\n                sstore(approvedAddressSlot, 0)\n            }\n        }\n\n        // Underflow of the sender's balance is impossible because we check for\n        // ownership above and the recipient's balance can't realistically overflow.\n        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.\n        unchecked {\n            // We can directly increment and decrement the balances.\n            --_packedAddressData[from]; // Updates: `balance -= 1`.\n            ++_packedAddressData[to]; // Updates: `balance += 1`.\n\n            // Updates:\n            // - `address` to the next owner.\n            // - `startTimestamp` to the timestamp of transfering.\n            // - `burned` to `false`.\n            // - `nextInitialized` to `true`.\n            _packedOwnerships[tokenId] = _packOwnershipData(\n                to,\n                _BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)\n            );\n\n            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .\n            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {\n                uint256 nextTokenId = tokenId + 1;\n                // If the next slot's address is zero and not burned (i.e. packed value is zero).\n                if (_packedOwnerships[nextTokenId] == 0) {\n                    // If the next slot is within bounds.\n                    if (nextTokenId != _currentIndex) {\n                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.\n                        _packedOwnerships[nextTokenId] = prevOwnershipPacked;\n                    }\n                }\n            }\n        }\n\n        emit Transfer(from, to, tokenId);\n        _afterTokenTransfers(from, to, tokenId, 1);\n    }\n\n    /**\n     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.\n     */\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 tokenId\n    ) public payable virtual override {\n        safeTransferFrom(from, to, tokenId, '');\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token\n     * by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement\n     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 tokenId,\n        bytes memory _data\n    ) public payable virtual override {\n        transferFrom(from, to, tokenId);\n        if (to.code.length != 0)\n            if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {\n                revert TransferToNonERC721ReceiverImplementer();\n            }\n    }\n\n    /**\n     * @dev Hook that is called before a set of serially-ordered token IDs\n     * are about to be transferred. This includes minting.\n     * And also called before burning one token.\n     *\n     * `startTokenId` - the first token ID to be transferred.\n     * `quantity` - the amount to be transferred.\n     *\n     * Calling conditions:\n     *\n     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be\n     * transferred to `to`.\n     * - When `from` is zero, `tokenId` will be minted for `to`.\n     * - When `to` is zero, `tokenId` will be burned by `from`.\n     * - `from` and `to` are never both zero.\n     */\n    function _beforeTokenTransfers(\n        address from,\n        address to,\n        uint256 startTokenId,\n        uint256 quantity\n    ) internal virtual {}\n\n    /**\n     * @dev Hook that is called after a set of serially-ordered token IDs\n     * have been transferred. This includes minting.\n     * And also called after one token has been burned.\n     *\n     * `startTokenId` - the first token ID to be transferred.\n     * `quantity` - the amount to be transferred.\n     *\n     * Calling conditions:\n     *\n     * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been\n     * transferred to `to`.\n     * - When `from` is zero, `tokenId` has been minted for `to`.\n     * - When `to` is zero, `tokenId` has been burned by `from`.\n     * - `from` and `to` are never both zero.\n     */\n    function _afterTokenTransfers(\n        address from,\n        address to,\n        uint256 startTokenId,\n        uint256 quantity\n    ) internal virtual {}\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.\n     *\n     * `from` - Previous owner of the given token ID.\n     * `to` - Target address that will receive the token.\n     * `tokenId` - Token ID to be transferred.\n     * `_data` - Optional data to send along with the call.\n     *\n     * Returns whether the call correctly returned the expected magic value.\n     */\n    function _checkContractOnERC721Received(\n        address from,\n        address to,\n        uint256 tokenId,\n        bytes memory _data\n    ) private returns (bool) {\n        try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (\n            bytes4 retval\n        ) {\n            return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;\n        } catch (bytes memory reason) {\n            if (reason.length == 0) {\n                revert TransferToNonERC721ReceiverImplementer();\n            } else {\n                assembly {\n                    revert(add(32, reason), mload(reason))\n                }\n            }\n        }\n    }\n\n    // =============================================================\n    //                        MINT OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Mints `quantity` tokens and transfers them to `to`.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `quantity` must be greater than 0.\n     *\n     * Emits a {Transfer} event for each mint.\n     */\n    function _mint(address to, uint256 quantity) internal virtual {\n        uint256 startTokenId = _currentIndex;\n        if (quantity == 0) revert MintZeroQuantity();\n\n        _beforeTokenTransfers(address(0), to, startTokenId, quantity);\n\n        // Overflows are incredibly unrealistic.\n        // `balance` and `numberMinted` have a maximum limit of 2**64.\n        // `tokenId` has a maximum limit of 2**256.\n        unchecked {\n            // Updates:\n            // - `balance += quantity`.\n            // - `numberMinted += quantity`.\n            //\n            // We can directly add to the `balance` and `numberMinted`.\n            _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);\n\n            // Updates:\n            // - `address` to the owner.\n            // - `startTimestamp` to the timestamp of minting.\n            // - `burned` to `false`.\n            // - `nextInitialized` to `quantity == 1`.\n            _packedOwnerships[startTokenId] = _packOwnershipData(\n                to,\n                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)\n            );\n\n            uint256 toMasked;\n            uint256 end = startTokenId + quantity;\n\n            // Use assembly to loop and emit the `Transfer` event for gas savings.\n            // The duplicated `log4` removes an extra check and reduces stack juggling.\n            // The assembly, together with the surrounding Solidity code, have been\n            // delicately arranged to nudge the compiler into producing optimized opcodes.\n            assembly {\n                // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.\n                toMasked := and(to, _BITMASK_ADDRESS)\n                // Emit the `Transfer` event.\n                log4(\n                    0, // Start of data (0, since no data).\n                    0, // End of data (0, since no data).\n                    _TRANSFER_EVENT_SIGNATURE, // Signature.\n                    0, // `address(0)`.\n                    toMasked, // `to`.\n                    startTokenId // `tokenId`.\n                )\n\n                // The `iszero(eq(,))` check ensures that large values of `quantity`\n                // that overflows uint256 will make the loop run out of gas.\n                // The compiler will optimize the `iszero` away for performance.\n                for {\n                    let tokenId := add(startTokenId, 1)\n                } iszero(eq(tokenId, end)) {\n                    tokenId := add(tokenId, 1)\n                } {\n                    // Emit the `Transfer` event. Similar to above.\n                    log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)\n                }\n            }\n            if (toMasked == 0) revert MintToZeroAddress();\n\n            _currentIndex = end;\n        }\n        _afterTokenTransfers(address(0), to, startTokenId, quantity);\n    }\n\n    /**\n     * @dev Mints `quantity` tokens and transfers them to `to`.\n     *\n     * This function is intended for efficient minting only during contract creation.\n     *\n     * It emits only one {ConsecutiveTransfer} as defined in\n     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),\n     * instead of a sequence of {Transfer} event(s).\n     *\n     * Calling this function outside of contract creation WILL make your contract\n     * non-compliant with the ERC721 standard.\n     * For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309\n     * {ConsecutiveTransfer} event is only permissible during contract creation.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `quantity` must be greater than 0.\n     *\n     * Emits a {ConsecutiveTransfer} event.\n     */\n    function _mintERC2309(address to, uint256 quantity) internal virtual {\n        uint256 startTokenId = _currentIndex;\n        if (to == address(0)) revert MintToZeroAddress();\n        if (quantity == 0) revert MintZeroQuantity();\n        if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();\n\n        _beforeTokenTransfers(address(0), to, startTokenId, quantity);\n\n        // Overflows are unrealistic due to the above check for `quantity` to be below the limit.\n        unchecked {\n            // Updates:\n            // - `balance += quantity`.\n            // - `numberMinted += quantity`.\n            //\n            // We can directly add to the `balance` and `numberMinted`.\n            _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);\n\n            // Updates:\n            // - `address` to the owner.\n            // - `startTimestamp` to the timestamp of minting.\n            // - `burned` to `false`.\n            // - `nextInitialized` to `quantity == 1`.\n            _packedOwnerships[startTokenId] = _packOwnershipData(\n                to,\n                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)\n            );\n\n            emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);\n\n            _currentIndex = startTokenId + quantity;\n        }\n        _afterTokenTransfers(address(0), to, startTokenId, quantity);\n    }\n\n    /**\n     * @dev Safely mints `quantity` tokens and transfers them to `to`.\n     *\n     * Requirements:\n     *\n     * - If `to` refers to a smart contract, it must implement\n     * {IERC721Receiver-onERC721Received}, which is called for each safe transfer.\n     * - `quantity` must be greater than 0.\n     *\n     * See {_mint}.\n     *\n     * Emits a {Transfer} event for each mint.\n     */\n    function _safeMint(\n        address to,\n        uint256 quantity,\n        bytes memory _data\n    ) internal virtual {\n        _mint(to, quantity);\n\n        unchecked {\n            if (to.code.length != 0) {\n                uint256 end = _currentIndex;\n                uint256 index = end - quantity;\n                do {\n                    if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {\n                        revert TransferToNonERC721ReceiverImplementer();\n                    }\n                } while (index < end);\n                // Reentrancy protection.\n                if (_currentIndex != end) revert();\n            }\n        }\n    }\n\n    /**\n     * @dev Equivalent to `_safeMint(to, quantity, '')`.\n     */\n    function _safeMint(address to, uint256 quantity) internal virtual {\n        _safeMint(to, quantity, '');\n    }\n\n    // =============================================================\n    //                        BURN OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Equivalent to `_burn(tokenId, false)`.\n     */\n    function _burn(uint256 tokenId) internal virtual {\n        _burn(tokenId, false);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId, bool approvalCheck) internal virtual {\n        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);\n\n        address from = address(uint160(prevOwnershipPacked));\n\n        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);\n\n        if (approvalCheck) {\n            // The nested ifs save around 20+ gas over a compound boolean condition.\n            if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))\n                if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();\n        }\n\n        _beforeTokenTransfers(from, address(0), tokenId, 1);\n\n        // Clear approvals from the previous owner.\n        assembly {\n            if approvedAddress {\n                // This is equivalent to `delete _tokenApprovals[tokenId]`.\n                sstore(approvedAddressSlot, 0)\n            }\n        }\n\n        // Underflow of the sender's balance is impossible because we check for\n        // ownership above and the recipient's balance can't realistically overflow.\n        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.\n        unchecked {\n            // Updates:\n            // - `balance -= 1`.\n            // - `numberBurned += 1`.\n            //\n            // We can directly decrement the balance, and increment the number burned.\n            // This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.\n            _packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;\n\n            // Updates:\n            // - `address` to the last owner.\n            // - `startTimestamp` to the timestamp of burning.\n            // - `burned` to `true`.\n            // - `nextInitialized` to `true`.\n            _packedOwnerships[tokenId] = _packOwnershipData(\n                from,\n                (_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)\n            );\n\n            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .\n            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {\n                uint256 nextTokenId = tokenId + 1;\n                // If the next slot's address is zero and not burned (i.e. packed value is zero).\n                if (_packedOwnerships[nextTokenId] == 0) {\n                    // If the next slot is within bounds.\n                    if (nextTokenId != _currentIndex) {\n                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.\n                        _packedOwnerships[nextTokenId] = prevOwnershipPacked;\n                    }\n                }\n            }\n        }\n\n        emit Transfer(from, address(0), tokenId);\n        _afterTokenTransfers(from, address(0), tokenId, 1);\n\n        // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.\n        unchecked {\n            _burnCounter++;\n        }\n    }\n\n    // =============================================================\n    //                     EXTRA DATA OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Directly sets the extra data for the ownership data `index`.\n     */\n    function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {\n        uint256 packed = _packedOwnerships[index];\n        if (packed == 0) revert OwnershipNotInitializedForExtraData();\n        uint256 extraDataCasted;\n        // Cast `extraData` with assembly to avoid redundant masking.\n        assembly {\n            extraDataCasted := extraData\n        }\n        packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);\n        _packedOwnerships[index] = packed;\n    }\n\n    /**\n     * @dev Called during each token transfer to set the 24bit `extraData` field.\n     * Intended to be overridden by the cosumer contract.\n     *\n     * `previousExtraData` - the value of `extraData` before transfer.\n     *\n     * Calling conditions:\n     *\n     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be\n     * transferred to `to`.\n     * - When `from` is zero, `tokenId` will be minted for `to`.\n     * - When `to` is zero, `tokenId` will be burned by `from`.\n     * - `from` and `to` are never both zero.\n     */\n    function _extraData(\n        address from,\n        address to,\n        uint24 previousExtraData\n    ) internal view virtual returns (uint24) {}\n\n    /**\n     * @dev Returns the next extra data for the packed ownership data.\n     * The returned result is shifted into position.\n     */\n    function _nextExtraData(\n        address from,\n        address to,\n        uint256 prevOwnershipPacked\n    ) private view returns (uint256) {\n        uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);\n        return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;\n    }\n\n    // =============================================================\n    //                       OTHER OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Returns the message sender (defaults to `msg.sender`).\n     *\n     * If you are writing GSN compatible contracts, you need to override this function.\n     */\n    function _msgSenderERC721A() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    /**\n     * @dev Converts a uint256 to its ASCII string decimal representation.\n     */\n    function _toString(uint256 value) internal pure virtual returns (string memory str) {\n        assembly {\n            // The maximum value of a uint256 contains 78 digits (1 byte per digit), but\n            // we allocate 0xa0 bytes to keep the free memory pointer 32-byte word aligned.\n            // We will need 1 word for the trailing zeros padding, 1 word for the length,\n            // and 3 words for a maximum of 78 digits. Total: 5 * 0x20 = 0xa0.\n            let m := add(mload(0x40), 0xa0)\n            // Update the free memory pointer to allocate.\n            mstore(0x40, m)\n            // Assign the `str` to the end.\n            str := sub(m, 0x20)\n            // Zeroize the slot after the string.\n            mstore(str, 0)\n\n            // Cache the end of the memory to calculate the length later.\n            let end := str\n\n            // We write the string from rightmost digit to leftmost digit.\n            // The following is essentially a do-while loop that also handles the zero case.\n            // prettier-ignore\n            for { let temp := value } 1 {} {\n                str := sub(str, 1)\n                // Write the character to the pointer.\n                // The ASCII index of the '0' character is 48.\n                mstore8(str, add(48, mod(temp, 10)))\n                // Keep dividing `temp` until zero.\n                temp := div(temp, 10)\n                // prettier-ignore\n                if iszero(temp) { break }\n            }\n\n            let length := sub(end, str)\n            // Move the pointer 32 bytes leftwards to make room for the length.\n            str := sub(str, 0x20)\n            // Store the length.\n            mstore(str, length)\n        }\n    }\n}\n"
    },
    "@chiru-labs/erc721a/contracts/IERC721A.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.3\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\n/**\n * @dev Interface of ERC721A.\n */\ninterface IERC721A {\n    /**\n     * The caller must own the token or be an approved operator.\n     */\n    error ApprovalCallerNotOwnerNorApproved();\n\n    /**\n     * The token does not exist.\n     */\n    error ApprovalQueryForNonexistentToken();\n\n    /**\n     * Cannot query the balance for the zero address.\n     */\n    error BalanceQueryForZeroAddress();\n\n    /**\n     * Cannot mint to the zero address.\n     */\n    error MintToZeroAddress();\n\n    /**\n     * The quantity of tokens minted must be more than zero.\n     */\n    error MintZeroQuantity();\n\n    /**\n     * The token does not exist.\n     */\n    error OwnerQueryForNonexistentToken();\n\n    /**\n     * The caller must own the token or be an approved operator.\n     */\n    error TransferCallerNotOwnerNorApproved();\n\n    /**\n     * The token must be owned by `from`.\n     */\n    error TransferFromIncorrectOwner();\n\n    /**\n     * Cannot safely transfer to a contract that does not implement the\n     * ERC721Receiver interface.\n     */\n    error TransferToNonERC721ReceiverImplementer();\n\n    /**\n     * Cannot transfer to the zero address.\n     */\n    error TransferToZeroAddress();\n\n    /**\n     * The token does not exist.\n     */\n    error URIQueryForNonexistentToken();\n\n    /**\n     * The `quantity` minted with ERC2309 exceeds the safety limit.\n     */\n    error MintERC2309QuantityExceedsLimit();\n\n    /**\n     * The `extraData` cannot be set on an unintialized ownership slot.\n     */\n    error OwnershipNotInitializedForExtraData();\n\n    // =============================================================\n    //                            STRUCTS\n    // =============================================================\n\n    struct TokenOwnership {\n        // The address of the owner.\n        address addr;\n        // Stores the start time of ownership with minimal overhead for tokenomics.\n        uint64 startTimestamp;\n        // Whether the token has been burned.\n        bool burned;\n        // Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.\n        uint24 extraData;\n    }\n\n    // =============================================================\n    //                         TOKEN COUNTERS\n    // =============================================================\n\n    /**\n     * @dev Returns the total number of tokens in existence.\n     * Burned tokens will reduce the count.\n     * To get the total number of tokens minted, please see {_totalMinted}.\n     */\n    function totalSupply() external view returns (uint256);\n\n    // =============================================================\n    //                            IERC165\n    // =============================================================\n\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n\n    // =============================================================\n    //                            IERC721\n    // =============================================================\n\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables\n     * (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in `owner`'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`,\n     * checking first that contract recipients are aware of the ERC721 protocol\n     * to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be have been allowed to move\n     * this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement\n     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 tokenId,\n        bytes calldata data\n    ) external payable;\n\n    /**\n     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.\n     */\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 tokenId\n    ) external payable;\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {safeTransferFrom}\n     * whenever possible.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token\n     * by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(\n        address from,\n        address to,\n        uint256 tokenId\n    ) external payable;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the\n     * zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external payable;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom}\n     * for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the caller.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool _approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n\n    // =============================================================\n    //                        IERC721Metadata\n    // =============================================================\n\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n\n    // =============================================================\n    //                           IERC2309\n    // =============================================================\n\n    /**\n     * @dev Emitted when tokens in `fromTokenId` to `toTokenId`\n     * (inclusive) is transferred from `from` to `to`, as defined in the\n     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.\n     *\n     * See {_mintERC2309} for more details.\n     */\n    event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);\n}\n"
    },
    "@opensea/operator-filter-registry/src/IOperatorFilterRegistry.sol": {
      "content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.13;\n\ninterface IOperatorFilterRegistry {\n    function isOperatorAllowed(address registrant, address operator) external view returns (bool);\n    function register(address registrant) external;\n    function registerAndSubscribe(address registrant, address subscription) external;\n    function registerAndCopyEntries(address registrant, address registrantToCopy) external;\n    function unregister(address addr) external;\n    function updateOperator(address registrant, address operator, bool filtered) external;\n    function updateOperators(address registrant, address[] calldata operators, bool filtered) external;\n    function updateCodeHash(address registrant, bytes32 codehash, bool filtered) external;\n    function updateCodeHashes(address registrant, bytes32[] calldata codeHashes, bool filtered) external;\n    function subscribe(address registrant, address registrantToSubscribe) external;\n    function unsubscribe(address registrant, bool copyExistingEntries) external;\n    function subscriptionOf(address addr) external returns (address registrant);\n    function subscribers(address registrant) external returns (address[] memory);\n    function subscriberAt(address registrant, uint256 index) external returns (address);\n    function copyEntriesOf(address registrant, address registrantToCopy) external;\n    function isOperatorFiltered(address registrant, address operator) external returns (bool);\n    function isCodeHashOfFiltered(address registrant, address operatorWithCode) external returns (bool);\n    function isCodeHashFiltered(address registrant, bytes32 codeHash) external returns (bool);\n    function filteredOperators(address addr) external returns (address[] memory);\n    function filteredCodeHashes(address addr) external returns (bytes32[] memory);\n    function filteredOperatorAt(address registrant, uint256 index) external returns (address);\n    function filteredCodeHashAt(address registrant, uint256 index) external returns (bytes32);\n    function isRegistered(address addr) external returns (bool);\n    function codeHashOf(address addr) external returns (bytes32);\n}\n"
    },
    "@opensea/operator-filter-registry/src/upgradeable/DefaultOperatorFiltererUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.13;\n\nimport {OperatorFiltererUpgradeable} from \"./OperatorFiltererUpgradeable.sol\";\n\nabstract contract DefaultOperatorFiltererUpgradeable is OperatorFiltererUpgradeable {\n    address constant DEFAULT_SUBSCRIPTION = address(0x3cc6CddA760b79bAfa08dF41ECFA224f810dCeB6);\n\n    function __DefaultOperatorFilterer_init() internal onlyInitializing {\n        OperatorFiltererUpgradeable.__OperatorFilterer_init(DEFAULT_SUBSCRIPTION, true);\n    }\n}\n"
    },
    "@opensea/operator-filter-registry/src/upgradeable/OperatorFiltererUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.13;\n\nimport {IOperatorFilterRegistry} from \"../IOperatorFilterRegistry.sol\";\nimport {Initializable} from \"openzeppelin-contracts-upgradeable/proxy/utils/Initializable.sol\";\n\nabstract contract OperatorFiltererUpgradeable is Initializable {\n    error OperatorNotAllowed(address operator);\n\n    IOperatorFilterRegistry constant operatorFilterRegistry =\n        IOperatorFilterRegistry(0x000000000000AAeB6D7670E522A718067333cd4E);\n\n    function __OperatorFilterer_init(address subscriptionOrRegistrantToCopy, bool subscribe)\n        internal\n        onlyInitializing\n    {\n        // If an inheriting token contract is deployed to a network without the registry deployed, the modifier\n        // will not revert, but the contract will need to be registered with the registry once it is deployed in\n        // order for the modifier to filter addresses.\n        if (address(operatorFilterRegistry).code.length > 0) {\n            if (!operatorFilterRegistry.isRegistered(address(this))) {\n                if (subscribe) {\n                    operatorFilterRegistry.registerAndSubscribe(address(this), subscriptionOrRegistrantToCopy);\n                } else {\n                    if (subscriptionOrRegistrantToCopy != address(0)) {\n                        operatorFilterRegistry.registerAndCopyEntries(address(this), subscriptionOrRegistrantToCopy);\n                    } else {\n                        operatorFilterRegistry.register(address(this));\n                    }\n                }\n            }\n        }\n    }\n\n    modifier onlyAllowedOperator(address from) virtual {\n        // Check registry code length to facilitate testing in environments without a deployed registry.\n        if (address(operatorFilterRegistry).code.length > 0) {\n            // Allow spending tokens from addresses with balance\n            // Note that this still allows listings and marketplaces with escrow to transfer tokens if transferred\n            // from an EOA.\n            if (from == msg.sender) {\n                _;\n                return;\n            }\n            if (!operatorFilterRegistry.isOperatorAllowed(address(this), msg.sender)) {\n                revert OperatorNotAllowed(msg.sender);\n            }\n        }\n        _;\n    }\n\n    modifier onlyAllowedOperatorApproval(address operator) virtual {\n        // Check registry code length to facilitate testing in environments without a deployed registry.\n        if (address(operatorFilterRegistry).code.length > 0) {\n            if (!operatorFilterRegistry.isOperatorAllowed(address(this), operator)) {\n                revert OperatorNotAllowed(operator);\n            }\n        }\n        _;\n    }\n}\n"
    },
    "@openzeppelin/contracts/contracts/interfaces/IERC2981.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.6.0) (interfaces/IERC2981.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/introspection/IERC165.sol\";\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n *\n * _Available since v4.5._\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice)\n        external\n        view\n        returns (address receiver, uint256 royaltyAmount);\n}\n"
    },
    "@openzeppelin/contracts/contracts/token/common/ERC2981.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (token/common/ERC2981.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../../interfaces/IERC2981.sol\";\nimport \"../../utils/introspection/ERC165.sol\";\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n *\n * _Available since v4.5._\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 _tokenId, uint256 _salePrice) public view virtual override returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[_tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (_salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        require(feeNumerator <= _feeDenominator(), \"ERC2981: royalty fee will exceed salePrice\");\n        require(receiver != address(0), \"ERC2981: invalid receiver\");\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(\n        uint256 tokenId,\n        address receiver,\n        uint96 feeNumerator\n    ) internal virtual {\n        require(feeNumerator <= _feeDenominator(), \"ERC2981: royalty fee will exceed salePrice\");\n        require(receiver != address(0), \"ERC2981: Invalid parameters\");\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n"
    },
    "@openzeppelin/contracts/contracts/utils/Address.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n    /**\n     * @dev Returns true if `account` is a contract.\n     *\n     * [IMPORTANT]\n     * ====\n     * It is unsafe to assume that an address for which this function returns\n     * false is an externally-owned account (EOA) and not a contract.\n     *\n     * Among others, `isContract` will return false for the following\n     * types of addresses:\n     *\n     *  - an externally-owned account\n     *  - a contract in construction\n     *  - an address where a contract will be created\n     *  - an address where a contract lived, but was destroyed\n     * ====\n     *\n     * [IMPORTANT]\n     * ====\n     * You shouldn't rely on `isContract` to protect against flash loan attacks!\n     *\n     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n     * constructor.\n     * ====\n     */\n    function isContract(address account) internal view returns (bool) {\n        // This method relies on extcodesize/address.code.length, which returns 0\n        // for contracts in construction, since the code is only stored at the end\n        // of the constructor execution.\n\n        return account.code.length > 0;\n    }\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n        (bool success, ) = recipient.call{value: amount}(\"\");\n        require(success, \"Address: unable to send value, recipient may have reverted\");\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason, it is bubbled up by this\n     * function (like regular Solidity function calls).\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, \"Address: low-level call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n     * `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n     * with `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        require(address(this).balance >= value, \"Address: insufficient balance for call\");\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        return functionStaticCall(target, data, \"Address: low-level static call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal view returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling\n     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.\n     *\n     * _Available since v4.8._\n     */\n    function verifyCallResultFromTarget(\n        address target,\n        bool success,\n        bytes memory returndata,\n        string memory errorMessage\n    ) internal view returns (bytes memory) {\n        if (success) {\n            if (returndata.length == 0) {\n                // only check isContract if the call was successful and the return data is empty\n                // otherwise we already know that it was a contract\n                require(isContract(target), \"Address: call to non-contract\");\n            }\n            return returndata;\n        } else {\n            _revert(returndata, errorMessage);\n        }\n    }\n\n    /**\n     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the\n     * revert reason or using the provided one.\n     *\n     * _Available since v4.3._\n     */\n    function verifyCallResult(\n        bool success,\n        bytes memory returndata,\n        string memory errorMessage\n    ) internal pure returns (bytes memory) {\n        if (success) {\n            return returndata;\n        } else {\n            _revert(returndata, errorMessage);\n        }\n    }\n\n    function _revert(bytes memory returndata, string memory errorMessage) private pure {\n        // Look for revert reason and bubble it up if present\n        if (returndata.length > 0) {\n            // The easiest way to bubble the revert reason is using memory via assembly\n            /// @solidity memory-safe-assembly\n            assembly {\n                let returndata_size := mload(returndata)\n                revert(add(32, returndata), returndata_size)\n            }\n        } else {\n            revert(errorMessage);\n        }\n    }\n}\n"
    },
    "@openzeppelin/contracts/contracts/utils/cryptography/ECDSA.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/ECDSA.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../Strings.sol\";\n\n/**\n * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.\n *\n * These functions can be used to verify that a message was signed by the holder\n * of the private keys of a given address.\n */\nlibrary ECDSA {\n    enum RecoverError {\n        NoError,\n        InvalidSignature,\n        InvalidSignatureLength,\n        InvalidSignatureS,\n        InvalidSignatureV // Deprecated in v4.8\n    }\n\n    function _throwError(RecoverError error) private pure {\n        if (error == RecoverError.NoError) {\n            return; // no error: do nothing\n        } else if (error == RecoverError.InvalidSignature) {\n            revert(\"ECDSA: invalid signature\");\n        } else if (error == RecoverError.InvalidSignatureLength) {\n            revert(\"ECDSA: invalid signature length\");\n        } else if (error == RecoverError.InvalidSignatureS) {\n            revert(\"ECDSA: invalid signature 's' value\");\n        }\n    }\n\n    /**\n     * @dev Returns the address that signed a hashed message (`hash`) with\n     * `signature` or error string. This address can then be used for verification purposes.\n     *\n     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:\n     * this function rejects them by requiring the `s` value to be in the lower\n     * half order, and the `v` value to be either 27 or 28.\n     *\n     * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n     * verification to be secure: it is possible to craft signatures that\n     * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n     * this is by receiving a hash of the original message (which may otherwise\n     * be too long), and then calling {toEthSignedMessageHash} on it.\n     *\n     * Documentation for signature generation:\n     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]\n     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]\n     *\n     * _Available since v4.3._\n     */\n    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {\n        if (signature.length == 65) {\n            bytes32 r;\n            bytes32 s;\n            uint8 v;\n            // ecrecover takes the signature parameters, and the only way to get them\n            // currently is to use assembly.\n            /// @solidity memory-safe-assembly\n            assembly {\n                r := mload(add(signature, 0x20))\n                s := mload(add(signature, 0x40))\n                v := byte(0, mload(add(signature, 0x60)))\n            }\n            return tryRecover(hash, v, r, s);\n        } else {\n            return (address(0), RecoverError.InvalidSignatureLength);\n        }\n    }\n\n    /**\n     * @dev Returns the address that signed a hashed message (`hash`) with\n     * `signature`. This address can then be used for verification purposes.\n     *\n     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:\n     * this function rejects them by requiring the `s` value to be in the lower\n     * half order, and the `v` value to be either 27 or 28.\n     *\n     * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n     * verification to be secure: it is possible to craft signatures that\n     * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n     * this is by receiving a hash of the original message (which may otherwise\n     * be too long), and then calling {toEthSignedMessageHash} on it.\n     */\n    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {\n        (address recovered, RecoverError error) = tryRecover(hash, signature);\n        _throwError(error);\n        return recovered;\n    }\n\n    /**\n     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.\n     *\n     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]\n     *\n     * _Available since v4.3._\n     */\n    function tryRecover(\n        bytes32 hash,\n        bytes32 r,\n        bytes32 vs\n    ) internal pure returns (address, RecoverError) {\n        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);\n        uint8 v = uint8((uint256(vs) >> 255) + 27);\n        return tryRecover(hash, v, r, s);\n    }\n\n    /**\n     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.\n     *\n     * _Available since v4.2._\n     */\n    function recover(\n        bytes32 hash,\n        bytes32 r,\n        bytes32 vs\n    ) internal pure returns (address) {\n        (address recovered, RecoverError error) = tryRecover(hash, r, vs);\n        _throwError(error);\n        return recovered;\n    }\n\n    /**\n     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,\n     * `r` and `s` signature fields separately.\n     *\n     * _Available since v4.3._\n     */\n    function tryRecover(\n        bytes32 hash,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) internal pure returns (address, RecoverError) {\n        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature\n        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines\n        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most\n        // signatures from current libraries generate a unique signature with an s-value in the lower half order.\n        //\n        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value\n        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or\n        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept\n        // these malleable signatures as well.\n        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {\n            return (address(0), RecoverError.InvalidSignatureS);\n        }\n\n        // If the signature is valid (and not malleable), return the signer address\n        address signer = ecrecover(hash, v, r, s);\n        if (signer == address(0)) {\n            return (address(0), RecoverError.InvalidSignature);\n        }\n\n        return (signer, RecoverError.NoError);\n    }\n\n    /**\n     * @dev Overload of {ECDSA-recover} that receives the `v`,\n     * `r` and `s` signature fields separately.\n     */\n    function recover(\n        bytes32 hash,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) internal pure returns (address) {\n        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);\n        _throwError(error);\n        return recovered;\n    }\n\n    /**\n     * @dev Returns an Ethereum Signed Message, created from a `hash`. This\n     * produces hash corresponding to the one signed with the\n     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]\n     * JSON-RPC method as part of EIP-191.\n     *\n     * See {recover}.\n     */\n    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {\n        // 32 is the length in bytes of hash,\n        // enforced by the type signature above\n        return keccak256(abi.encodePacked(\"\\x19Ethereum Signed Message:\\n32\", hash));\n    }\n\n    /**\n     * @dev Returns an Ethereum Signed Message, created from `s`. This\n     * produces hash corresponding to the one signed with the\n     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]\n     * JSON-RPC method as part of EIP-191.\n     *\n     * See {recover}.\n     */\n    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {\n        return keccak256(abi.encodePacked(\"\\x19Ethereum Signed Message:\\n\", Strings.toString(s.length), s));\n    }\n\n    /**\n     * @dev Returns an Ethereum Signed Typed Data, created from a\n     * `domainSeparator` and a `structHash`. This produces hash corresponding\n     * to the one signed with the\n     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]\n     * JSON-RPC method as part of EIP-712.\n     *\n     * See {recover}.\n     */\n    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {\n        return keccak256(abi.encodePacked(\"\\x19\\x01\", domainSeparator, structHash));\n    }\n}\n"
    },
    "@openzeppelin/contracts/contracts/utils/introspection/ERC165.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./IERC165.sol\";\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n *\n * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n"
    },
    "@openzeppelin/contracts/contracts/utils/introspection/IERC165.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n"
    },
    "@openzeppelin/contracts/contracts/utils/math/Math.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    enum Rounding {\n        Down, // Toward negative infinity\n        Up, // Toward infinity\n        Zero // Toward zero\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds up instead\n     * of rounding down.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)\n     * with further edits by Uniswap Labs also under MIT license.\n     */\n    function mulDiv(\n        uint256 x,\n        uint256 y,\n        uint256 denominator\n    ) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod0 := mul(x, y)\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            require(denominator > prod1);\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.\n            // See https://cs.stackexchange.com/q/138556/92363.\n\n            // Does not overflow because the denominator cannot be zero at this stage in the function.\n            uint256 twos = denominator & (~denominator + 1);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works\n            // in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(\n        uint256 x,\n        uint256 y,\n        uint256 denominator,\n        Rounding rounding\n    ) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2, rounded down, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10, rounded down, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10**64) {\n                value /= 10**64;\n                result += 64;\n            }\n            if (value >= 10**32) {\n                value /= 10**32;\n                result += 32;\n            }\n            if (value >= 10**16) {\n                value /= 10**16;\n                result += 16;\n            }\n            if (value >= 10**8) {\n                value /= 10**8;\n                result += 8;\n            }\n            if (value >= 10**4) {\n                value /= 10**4;\n                result += 4;\n            }\n            if (value >= 10**2) {\n                value /= 10**2;\n                result += 2;\n            }\n            if (value >= 10**1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256, rounded down, of a positive value.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);\n        }\n    }\n}\n"
    },
    "@openzeppelin/contracts/contracts/utils/math/SafeCast.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SafeCast.sol)\n// This file was procedurally generated from scripts/generate/templates/SafeCast.js.\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow\n * checks.\n *\n * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can\n * easily result in undesired exploitation or bugs, since developers usually\n * assume that overflows raise errors. `SafeCast` restores this intuition by\n * reverting the transaction when such an operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it's recommended to use it always.\n *\n * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing\n * all math on `uint256` and `int256` and then downcasting.\n */\nlibrary SafeCast {\n    /**\n     * @dev Returns the downcasted uint248 from uint256, reverting on\n     * overflow (when the input is greater than largest uint248).\n     *\n     * Counterpart to Solidity's `uint248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint248(uint256 value) internal pure returns (uint248) {\n        require(value <= type(uint248).max, \"SafeCast: value doesn't fit in 248 bits\");\n        return uint248(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint240 from uint256, reverting on\n     * overflow (when the input is greater than largest uint240).\n     *\n     * Counterpart to Solidity's `uint240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint240(uint256 value) internal pure returns (uint240) {\n        require(value <= type(uint240).max, \"SafeCast: value doesn't fit in 240 bits\");\n        return uint240(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint232 from uint256, reverting on\n     * overflow (when the input is greater than largest uint232).\n     *\n     * Counterpart to Solidity's `uint232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint232(uint256 value) internal pure returns (uint232) {\n        require(value <= type(uint232).max, \"SafeCast: value doesn't fit in 232 bits\");\n        return uint232(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint224 from uint256, reverting on\n     * overflow (when the input is greater than largest uint224).\n     *\n     * Counterpart to Solidity's `uint224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     *\n     * _Available since v4.2._\n     */\n    function toUint224(uint256 value) internal pure returns (uint224) {\n        require(value <= type(uint224).max, \"SafeCast: value doesn't fit in 224 bits\");\n        return uint224(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint216 from uint256, reverting on\n     * overflow (when the input is greater than largest uint216).\n     *\n     * Counterpart to Solidity's `uint216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint216(uint256 value) internal pure returns (uint216) {\n        require(value <= type(uint216).max, \"SafeCast: value doesn't fit in 216 bits\");\n        return uint216(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint208 from uint256, reverting on\n     * overflow (when the input is greater than largest uint208).\n     *\n     * Counterpart to Solidity's `uint208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint208(uint256 value) internal pure returns (uint208) {\n        require(value <= type(uint208).max, \"SafeCast: value doesn't fit in 208 bits\");\n        return uint208(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint200 from uint256, reverting on\n     * overflow (when the input is greater than largest uint200).\n     *\n     * Counterpart to Solidity's `uint200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint200(uint256 value) internal pure returns (uint200) {\n        require(value <= type(uint200).max, \"SafeCast: value doesn't fit in 200 bits\");\n        return uint200(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint192 from uint256, reverting on\n     * overflow (when the input is greater than largest uint192).\n     *\n     * Counterpart to Solidity's `uint192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint192(uint256 value) internal pure returns (uint192) {\n        require(value <= type(uint192).max, \"SafeCast: value doesn't fit in 192 bits\");\n        return uint192(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint184 from uint256, reverting on\n     * overflow (when the input is greater than largest uint184).\n     *\n     * Counterpart to Solidity's `uint184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint184(uint256 value) internal pure returns (uint184) {\n        require(value <= type(uint184).max, \"SafeCast: value doesn't fit in 184 bits\");\n        return uint184(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint176 from uint256, reverting on\n     * overflow (when the input is greater than largest uint176).\n     *\n     * Counterpart to Solidity's `uint176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint176(uint256 value) internal pure returns (uint176) {\n        require(value <= type(uint176).max, \"SafeCast: value doesn't fit in 176 bits\");\n        return uint176(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint168 from uint256, reverting on\n     * overflow (when the input is greater than largest uint168).\n     *\n     * Counterpart to Solidity's `uint168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint168(uint256 value) internal pure returns (uint168) {\n        require(value <= type(uint168).max, \"SafeCast: value doesn't fit in 168 bits\");\n        return uint168(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint160 from uint256, reverting on\n     * overflow (when the input is greater than largest uint160).\n     *\n     * Counterpart to Solidity's `uint160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint160(uint256 value) internal pure returns (uint160) {\n        require(value <= type(uint160).max, \"SafeCast: value doesn't fit in 160 bits\");\n        return uint160(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint152 from uint256, reverting on\n     * overflow (when the input is greater than largest uint152).\n     *\n     * Counterpart to Solidity's `uint152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint152(uint256 value) internal pure returns (uint152) {\n        require(value <= type(uint152).max, \"SafeCast: value doesn't fit in 152 bits\");\n        return uint152(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint144 from uint256, reverting on\n     * overflow (when the input is greater than largest uint144).\n     *\n     * Counterpart to Solidity's `uint144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint144(uint256 value) internal pure returns (uint144) {\n        require(value <= type(uint144).max, \"SafeCast: value doesn't fit in 144 bits\");\n        return uint144(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint136 from uint256, reverting on\n     * overflow (when the input is greater than largest uint136).\n     *\n     * Counterpart to Solidity's `uint136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint136(uint256 value) internal pure returns (uint136) {\n        require(value <= type(uint136).max, \"SafeCast: value doesn't fit in 136 bits\");\n        return uint136(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint128 from uint256, reverting on\n     * overflow (when the input is greater than largest uint128).\n     *\n     * Counterpart to Solidity's `uint128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint128(uint256 value) internal pure returns (uint128) {\n        require(value <= type(uint128).max, \"SafeCast: value doesn't fit in 128 bits\");\n        return uint128(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint120 from uint256, reverting on\n     * overflow (when the input is greater than largest uint120).\n     *\n     * Counterpart to Solidity's `uint120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint120(uint256 value) internal pure returns (uint120) {\n        require(value <= type(uint120).max, \"SafeCast: value doesn't fit in 120 bits\");\n        return uint120(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint112 from uint256, reverting on\n     * overflow (when the input is greater than largest uint112).\n     *\n     * Counterpart to Solidity's `uint112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint112(uint256 value) internal pure returns (uint112) {\n        require(value <= type(uint112).max, \"SafeCast: value doesn't fit in 112 bits\");\n        return uint112(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint104 from uint256, reverting on\n     * overflow (when the input is greater than largest uint104).\n     *\n     * Counterpart to Solidity's `uint104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint104(uint256 value) internal pure returns (uint104) {\n        require(value <= type(uint104).max, \"SafeCast: value doesn't fit in 104 bits\");\n        return uint104(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint96 from uint256, reverting on\n     * overflow (when the input is greater than largest uint96).\n     *\n     * Counterpart to Solidity's `uint96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     *\n     * _Available since v4.2._\n     */\n    function toUint96(uint256 value) internal pure returns (uint96) {\n        require(value <= type(uint96).max, \"SafeCast: value doesn't fit in 96 bits\");\n        return uint96(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint88 from uint256, reverting on\n     * overflow (when the input is greater than largest uint88).\n     *\n     * Counterpart to Solidity's `uint88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint88(uint256 value) internal pure returns (uint88) {\n        require(value <= type(uint88).max, \"SafeCast: value doesn't fit in 88 bits\");\n        return uint88(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint80 from uint256, reverting on\n     * overflow (when the input is greater than largest uint80).\n     *\n     * Counterpart to Solidity's `uint80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint80(uint256 value) internal pure returns (uint80) {\n        require(value <= type(uint80).max, \"SafeCast: value doesn't fit in 80 bits\");\n        return uint80(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint72 from uint256, reverting on\n     * overflow (when the input is greater than largest uint72).\n     *\n     * Counterpart to Solidity's `uint72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint72(uint256 value) internal pure returns (uint72) {\n        require(value <= type(uint72).max, \"SafeCast: value doesn't fit in 72 bits\");\n        return uint72(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint64 from uint256, reverting on\n     * overflow (when the input is greater than largest uint64).\n     *\n     * Counterpart to Solidity's `uint64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint64(uint256 value) internal pure returns (uint64) {\n        require(value <= type(uint64).max, \"SafeCast: value doesn't fit in 64 bits\");\n        return uint64(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint56 from uint256, reverting on\n     * overflow (when the input is greater than largest uint56).\n     *\n     * Counterpart to Solidity's `uint56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint56(uint256 value) internal pure returns (uint56) {\n        require(value <= type(uint56).max, \"SafeCast: value doesn't fit in 56 bits\");\n        return uint56(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint48 from uint256, reverting on\n     * overflow (when the input is greater than largest uint48).\n     *\n     * Counterpart to Solidity's `uint48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint48(uint256 value) internal pure returns (uint48) {\n        require(value <= type(uint48).max, \"SafeCast: value doesn't fit in 48 bits\");\n        return uint48(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint40 from uint256, reverting on\n     * overflow (when the input is greater than largest uint40).\n     *\n     * Counterpart to Solidity's `uint40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint40(uint256 value) internal pure returns (uint40) {\n        require(value <= type(uint40).max, \"SafeCast: value doesn't fit in 40 bits\");\n        return uint40(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint32 from uint256, reverting on\n     * overflow (when the input is greater than largest uint32).\n     *\n     * Counterpart to Solidity's `uint32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint32(uint256 value) internal pure returns (uint32) {\n        require(value <= type(uint32).max, \"SafeCast: value doesn't fit in 32 bits\");\n        return uint32(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint24 from uint256, reverting on\n     * overflow (when the input is greater than largest uint24).\n     *\n     * Counterpart to Solidity's `uint24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint24(uint256 value) internal pure returns (uint24) {\n        require(value <= type(uint24).max, \"SafeCast: value doesn't fit in 24 bits\");\n        return uint24(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint16 from uint256, reverting on\n     * overflow (when the input is greater than largest uint16).\n     *\n     * Counterpart to Solidity's `uint16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint16(uint256 value) internal pure returns (uint16) {\n        require(value <= type(uint16).max, \"SafeCast: value doesn't fit in 16 bits\");\n        return uint16(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint8 from uint256, reverting on\n     * overflow (when the input is greater than largest uint8).\n     *\n     * Counterpart to Solidity's `uint8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint8(uint256 value) internal pure returns (uint8) {\n        require(value <= type(uint8).max, \"SafeCast: value doesn't fit in 8 bits\");\n        return uint8(value);\n    }\n\n    /**\n     * @dev Converts a signed int256 into an unsigned uint256.\n     *\n     * Requirements:\n     *\n     * - input must be greater than or equal to 0.\n     *\n     * _Available since v3.0._\n     */\n    function toUint256(int256 value) internal pure returns (uint256) {\n        require(value >= 0, \"SafeCast: value must be positive\");\n        return uint256(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int248 from int256, reverting on\n     * overflow (when the input is less than smallest int248 or\n     * greater than largest int248).\n     *\n     * Counterpart to Solidity's `int248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt248(int256 value) internal pure returns (int248 downcasted) {\n        downcasted = int248(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 248 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int240 from int256, reverting on\n     * overflow (when the input is less than smallest int240 or\n     * greater than largest int240).\n     *\n     * Counterpart to Solidity's `int240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt240(int256 value) internal pure returns (int240 downcasted) {\n        downcasted = int240(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 240 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int232 from int256, reverting on\n     * overflow (when the input is less than smallest int232 or\n     * greater than largest int232).\n     *\n     * Counterpart to Solidity's `int232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt232(int256 value) internal pure returns (int232 downcasted) {\n        downcasted = int232(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 232 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int224 from int256, reverting on\n     * overflow (when the input is less than smallest int224 or\n     * greater than largest int224).\n     *\n     * Counterpart to Solidity's `int224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt224(int256 value) internal pure returns (int224 downcasted) {\n        downcasted = int224(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 224 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int216 from int256, reverting on\n     * overflow (when the input is less than smallest int216 or\n     * greater than largest int216).\n     *\n     * Counterpart to Solidity's `int216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt216(int256 value) internal pure returns (int216 downcasted) {\n        downcasted = int216(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 216 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int208 from int256, reverting on\n     * overflow (when the input is less than smallest int208 or\n     * greater than largest int208).\n     *\n     * Counterpart to Solidity's `int208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt208(int256 value) internal pure returns (int208 downcasted) {\n        downcasted = int208(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 208 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int200 from int256, reverting on\n     * overflow (when the input is less than smallest int200 or\n     * greater than largest int200).\n     *\n     * Counterpart to Solidity's `int200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt200(int256 value) internal pure returns (int200 downcasted) {\n        downcasted = int200(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 200 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int192 from int256, reverting on\n     * overflow (when the input is less than smallest int192 or\n     * greater than largest int192).\n     *\n     * Counterpart to Solidity's `int192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt192(int256 value) internal pure returns (int192 downcasted) {\n        downcasted = int192(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 192 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int184 from int256, reverting on\n     * overflow (when the input is less than smallest int184 or\n     * greater than largest int184).\n     *\n     * Counterpart to Solidity's `int184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt184(int256 value) internal pure returns (int184 downcasted) {\n        downcasted = int184(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 184 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int176 from int256, reverting on\n     * overflow (when the input is less than smallest int176 or\n     * greater than largest int176).\n     *\n     * Counterpart to Solidity's `int176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt176(int256 value) internal pure returns (int176 downcasted) {\n        downcasted = int176(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 176 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int168 from int256, reverting on\n     * overflow (when the input is less than smallest int168 or\n     * greater than largest int168).\n     *\n     * Counterpart to Solidity's `int168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt168(int256 value) internal pure returns (int168 downcasted) {\n        downcasted = int168(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 168 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int160 from int256, reverting on\n     * overflow (when the input is less than smallest int160 or\n     * greater than largest int160).\n     *\n     * Counterpart to Solidity's `int160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt160(int256 value) internal pure returns (int160 downcasted) {\n        downcasted = int160(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 160 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int152 from int256, reverting on\n     * overflow (when the input is less than smallest int152 or\n     * greater than largest int152).\n     *\n     * Counterpart to Solidity's `int152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt152(int256 value) internal pure returns (int152 downcasted) {\n        downcasted = int152(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 152 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int144 from int256, reverting on\n     * overflow (when the input is less than smallest int144 or\n     * greater than largest int144).\n     *\n     * Counterpart to Solidity's `int144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt144(int256 value) internal pure returns (int144 downcasted) {\n        downcasted = int144(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 144 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int136 from int256, reverting on\n     * overflow (when the input is less than smallest int136 or\n     * greater than largest int136).\n     *\n     * Counterpart to Solidity's `int136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt136(int256 value) internal pure returns (int136 downcasted) {\n        downcasted = int136(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 136 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int128 from int256, reverting on\n     * overflow (when the input is less than smallest int128 or\n     * greater than largest int128).\n     *\n     * Counterpart to Solidity's `int128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt128(int256 value) internal pure returns (int128 downcasted) {\n        downcasted = int128(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 128 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int120 from int256, reverting on\n     * overflow (when the input is less than smallest int120 or\n     * greater than largest int120).\n     *\n     * Counterpart to Solidity's `int120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt120(int256 value) internal pure returns (int120 downcasted) {\n        downcasted = int120(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 120 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int112 from int256, reverting on\n     * overflow (when the input is less than smallest int112 or\n     * greater than largest int112).\n     *\n     * Counterpart to Solidity's `int112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt112(int256 value) internal pure returns (int112 downcasted) {\n        downcasted = int112(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 112 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int104 from int256, reverting on\n     * overflow (when the input is less than smallest int104 or\n     * greater than largest int104).\n     *\n     * Counterpart to Solidity's `int104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt104(int256 value) internal pure returns (int104 downcasted) {\n        downcasted = int104(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 104 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int96 from int256, reverting on\n     * overflow (when the input is less than smallest int96 or\n     * greater than largest int96).\n     *\n     * Counterpart to Solidity's `int96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt96(int256 value) internal pure returns (int96 downcasted) {\n        downcasted = int96(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 96 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int88 from int256, reverting on\n     * overflow (when the input is less than smallest int88 or\n     * greater than largest int88).\n     *\n     * Counterpart to Solidity's `int88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt88(int256 value) internal pure returns (int88 downcasted) {\n        downcasted = int88(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 88 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int80 from int256, reverting on\n     * overflow (when the input is less than smallest int80 or\n     * greater than largest int80).\n     *\n     * Counterpart to Solidity's `int80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt80(int256 value) internal pure returns (int80 downcasted) {\n        downcasted = int80(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 80 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int72 from int256, reverting on\n     * overflow (when the input is less than smallest int72 or\n     * greater than largest int72).\n     *\n     * Counterpart to Solidity's `int72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt72(int256 value) internal pure returns (int72 downcasted) {\n        downcasted = int72(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 72 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int64 from int256, reverting on\n     * overflow (when the input is less than smallest int64 or\n     * greater than largest int64).\n     *\n     * Counterpart to Solidity's `int64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt64(int256 value) internal pure returns (int64 downcasted) {\n        downcasted = int64(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 64 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int56 from int256, reverting on\n     * overflow (when the input is less than smallest int56 or\n     * greater than largest int56).\n     *\n     * Counterpart to Solidity's `int56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt56(int256 value) internal pure returns (int56 downcasted) {\n        downcasted = int56(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 56 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int48 from int256, reverting on\n     * overflow (when the input is less than smallest int48 or\n     * greater than largest int48).\n     *\n     * Counterpart to Solidity's `int48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt48(int256 value) internal pure returns (int48 downcasted) {\n        downcasted = int48(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 48 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int40 from int256, reverting on\n     * overflow (when the input is less than smallest int40 or\n     * greater than largest int40).\n     *\n     * Counterpart to Solidity's `int40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt40(int256 value) internal pure returns (int40 downcasted) {\n        downcasted = int40(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 40 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int32 from int256, reverting on\n     * overflow (when the input is less than smallest int32 or\n     * greater than largest int32).\n     *\n     * Counterpart to Solidity's `int32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt32(int256 value) internal pure returns (int32 downcasted) {\n        downcasted = int32(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 32 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int24 from int256, reverting on\n     * overflow (when the input is less than smallest int24 or\n     * greater than largest int24).\n     *\n     * Counterpart to Solidity's `int24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt24(int256 value) internal pure returns (int24 downcasted) {\n        downcasted = int24(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 24 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int16 from int256, reverting on\n     * overflow (when the input is less than smallest int16 or\n     * greater than largest int16).\n     *\n     * Counterpart to Solidity's `int16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt16(int256 value) internal pure returns (int16 downcasted) {\n        downcasted = int16(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 16 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int8 from int256, reverting on\n     * overflow (when the input is less than smallest int8 or\n     * greater than largest int8).\n     *\n     * Counterpart to Solidity's `int8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt8(int256 value) internal pure returns (int8 downcasted) {\n        downcasted = int8(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 8 bits\");\n    }\n\n    /**\n     * @dev Converts an unsigned uint256 into a signed int256.\n     *\n     * Requirements:\n     *\n     * - input must be less than or equal to maxInt256.\n     *\n     * _Available since v3.0._\n     */\n    function toInt256(uint256 value) internal pure returns (int256) {\n        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive\n        require(value <= uint256(type(int256).max), \"SafeCast: value doesn't fit in an int256\");\n        return int256(value);\n    }\n}\n"
    },
    "@openzeppelin/contracts/contracts/utils/Strings.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./math/Math.sol\";\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant _SYMBOLS = \"0123456789abcdef\";\n    uint8 private constant _ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = _SYMBOLS[value & 0xf];\n            value >>= 4;\n        }\n        require(value == 0, \"Strings: hex length insufficient\");\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);\n    }\n}\n"
    },
    "contracts/Dorado721A.sol": {
      "content": "// SPDX-License-Identifier: GPL-3.0\npragma solidity ^0.8.13;\n\nimport \"@chiru-labs/erc721a/contracts/ERC721A.sol\";\nimport \"@openzeppelin/contracts/contracts/token/common/ERC2981.sol\";\nimport \"@openzeppelin/contracts/contracts/utils/introspection/ERC165.sol\";\nimport \"@openzeppelin/contracts/contracts/utils/cryptography/ECDSA.sol\";\nimport \"@openzeppelin/contracts/contracts/utils/Address.sol\";\nimport \"@openzeppelin/contracts/contracts/utils/math/SafeCast.sol\";\nimport \"@opensea/operator-filter-registry/src/upgradeable/DefaultOperatorFiltererUpgradeable.sol\";\nimport \"./interfaces/IDoradoLogic.sol\";\nimport \"./interfaces/IDorado.sol\";\n\nstring constant UNRECOGNIZABLE_HASH_ERROR = \"Unrecognizable Hash\";\nstring constant WALLET_LIMIT_EXCEEDED = \"Wallet Limit Exceeded\";\nstring constant WALLET_STAGE_LIMIT_EXCEEDED = \"Wallet Stage Limit Exceeded\";\nstring constant STAGE_EXCEEDED = \"Stage exceeded\";\nstring constant STAGE_LIMIT_EXCEEDED = \"Stage Limit Exceeded\";\nstring constant STAGE_OUT_TOTAL = \"Stage Quantity Exceeded\";\nstring constant CANNOT_USE_ZERO = \"Cannot use 0 address\";\nstring constant OWNER_ERROR = \"Ownable: caller is not the owner\";\nstring constant ETH_NOT_ENOUGH = \"Sent ETH not enough\";\nstring constant TOKEN_QUANTITY_EXCEEDED = \"Token's quantity exceeded\";\n\n// DefaultOperatorFiltererUpgradeable check https://etherscan.io/address/0x000000000000AAeB6D7670E522A718067333cd4E#code\ncontract Dorado721A is ERC721A, ERC165, ERC2981, DefaultOperatorFiltererUpgradeable, IDoradoLogic {\n    uint256 private constant _MINT_BITS_TOTAL = 200;\n    uint256 private constant _MINT_BITS_LENGTH = 20;\n    uint256 private constant _MINT_BITS = 0xFFFFF; // stage max mint = 20 bits = 0xFFFFF = 1048575.\n\n    // don't change name. It's used as xxx.owner()\n    address public owner; // Owner is specified by DoradoKit.sol's call initialize.\n    address private _pendingOwner; // use for owner step.\n\n    modifier onlyOwner() {\n        require(msg.sender == owner, OWNER_ERROR);\n        _;\n    }\n\n    modifier onlyOwnerOrPlatform() {\n        require((msg.sender == owner) || (msg.sender == viewWithdraw()), OWNER_ERROR);\n        _;\n    }\n\n    string private _name; // override ERC721A's private name.\n    string private _symbol; // override ERC721A's private symbol.\n\n    string public baseURI; // real resource uri.\n    string public revealURI; // reveal resource uri.\n    string public contractURI; // (https://docs.opensea.io/docs/contract-level-metadata)\n\n    uint256 public maxTokens;\n    uint256 private _airdropCount;\n\n    mapping(bytes32 => bool) private _usedHashes; // signature filter.\n    mapping(address => uint256) private addressStageMint;\n\n    address private _doradoKit; // Dorado Kit.\n    address private _treasury; // Collection's treasury.\n\n    bool public burnable;\n    bool public lockURI;\n\n    modifier onlyUser() {\n        require(!Address.isContract(msg.sender), \"Don't support contract\");\n        _;\n    }\n\n    modifier saleIsOpen(MintData memory ms, bytes calldata signature) {\n        // hard check\n        {\n            require(ms.stage > 0 && ms.stage <= 10, STAGE_EXCEEDED);\n            require(block.number <= ms.nonce + 20, \"Time limit has passed\");\n            require(ms.quantity <= 20, TOKEN_QUANTITY_EXCEEDED);\n            require(msg.value >= ms.price * ms.quantity, ETH_NOT_ENOUGH);\n\n            bytes32 messageHash = hashTransaction(address(this), msg.sender, ms);\n            address signerAddress = viewSigner();\n            require(ECDSA.recover(messageHash, signature) == signerAddress, UNRECOGNIZABLE_HASH_ERROR);\n            // reject reused signature.\n            require(!_usedHashes[messageHash], \"Reused Hash\");\n            _usedHashes[messageHash] = true;\n        }\n        _;\n    }\n\n    // =============================================================\n    //                        EVENTS\n    // =============================================================\n    event OwnershipTransferred(address indexed prevOwner, address indexed newOwner);\n    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);\n    event TokenURIChanged(string oldURI, string newURI, uint8 typeid);\n    event BalanceChanged(uint256 feeAmount, uint256 transferAmount);\n    event Mint(address to, uint8 stage, uint256 startTokenId, uint256 quantity, uint256 price);\n    event TreasuryChanged(address indexed newTreasuryAddress);\n\n    constructor() payable ERC721A(\"\", \"\") {\n        _name = \"Dorado721A\";\n        _symbol = \"Dorado\";\n    }\n\n    function initialize(\n        string calldata name_,\n        string calldata symbol_,\n        uint64 maxTokens_,\n        bool burnable_,\n        uint96 feeNumerator_,\n        address treasury_,\n        string[] calldata uris\n    ) external initializer {\n        address creator = tx.origin;\n        _doradoKit = msg.sender;\n        owner = creator;\n        _name = name_;\n        _symbol = symbol_;\n        maxTokens = maxTokens_;\n        burnable = burnable_;\n        if (treasury_ != address(0)) {\n            _treasury = treasury_;\n        }\n        baseURI = uris[0];\n        revealURI = uris[1];\n        contractURI = uris[2];\n\n        _setDefaultRoyalty(creator, feeNumerator_);\n        __DefaultOperatorFilterer_init();\n        // start token id must be 0.\n        // otherwise should init _currentIndex\n        // _currentIndex = _startTokenId();\n    }\n\n    // =============================================================\n    //                        Wallet\n    // =============================================================\n    receive() external payable {}\n\n    function setTreasury(address newTreasury) external onlyOwner {\n        require(newTreasury != address(0), CANNOT_USE_ZERO);\n        _treasury = newTreasury;\n        emit TreasuryChanged(newTreasury);\n    }\n\n    function viewSigner() public view returns (address returnSigner) {\n        returnSigner = IDorado(_doradoKit).viewSigner();\n    }\n\n    function viewWithdraw() public view returns (address returnWithdraw) {\n        returnWithdraw = IDorado(_doradoKit).viewWithdraw();\n    }\n\n    function getFeeRate() public view returns (uint96 feeRate) {\n        feeRate = IDorado(_doradoKit).getFeeRateOf(address(this));\n    }\n\n    // =============================================================\n    //                        IERC721Metadata\n    // =============================================================\n    function name() public view virtual override returns (string memory) {\n        return _name;\n    }\n\n    function symbol() public view virtual override returns (string memory) {\n        return _symbol;\n    }\n\n    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {\n        require(_exists(tokenId), \"ERC721Metadata: URI query for nonexistent token\");\n        string memory uri = baseURI;\n        // if baseURI is empty uri, use reveal uri.\n        if (bytes(uri).length == 0) {\n            return revealURI;\n        }\n        return string(abi.encodePacked(uri, Strings.toString(tokenId)));\n    }\n\n    // =============================================================\n    //                        ERC2981\n    // =============================================================\n    function setDefaultRoyalty(address receiver, uint96 feeNumerator) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeNumerator);\n    }\n\n    function setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) external onlyOwner {\n        _setTokenRoyalty(tokenId, receiver, feeNumerator);\n    }\n\n    function resetTokenRoyalty(uint256 tokenId) external onlyOwner {\n        _resetTokenRoyalty(tokenId);\n    }\n\n    // =============================================================\n    //                        IERC165\n    // =============================================================\n    function supportsInterface(\n        bytes4 interfaceId\n    ) public view virtual override(ERC721A, ERC165, ERC2981) returns (bool) {\n        return (ERC721A).supportsInterface(interfaceId) || (ERC2981).supportsInterface(interfaceId);\n    }\n\n    // =============================================================\n    //                      TRANSFER OPERATIONS\n    // =============================================================\n    function airdrop(address[] calldata address_, uint64 quantity) external onlyOwner {\n        require(\n            totalMinted() + address_.length * quantity <= maxTokens,\n            \"This exceeds the maximum number of NFTs on sale!\"\n        );\n\n        uint256 beginTokenId = nextTokenId();\n        for (uint256 i = 0; i < address_.length; ) {\n            address to = address_[i];\n            _safeMint(to, uint256(quantity));\n            emit Mint(to, 0, beginTokenId, quantity, 0);\n            unchecked {\n                beginTokenId = beginTokenId + quantity;\n                ++i;\n            }\n        }\n\n        unchecked {\n            _airdropCount += address_.length * quantity;\n        }\n    }\n\n    function mint(MintData memory ms, bytes calldata signature) external payable saleIsOpen(ms, signature) onlyUser {\n        uint256 beginTokenId = nextTokenId();\n        uint256 alreadyMinted = beginTokenId - startTokenId();\n        uint256 stageIdx = ms.stage - 1;\n\n        uint256 availableCount = ms.quantity;\n        {\n            // if has airdrop , stageLimit must contains airdrop nums;\n            // for example, airdrop 10 tokens, owner set stage limit 20\n            // now, beginTokenId = 10 (0..9 has been minted), stageLimit = 30\n            uint256 stageLimit = _airdropCount + ms.stageLimit;\n            require(stageLimit > alreadyMinted, STAGE_LIMIT_EXCEEDED);\n            require(stageLimit <= maxTokens, STAGE_OUT_TOTAL);\n\n            uint256 mintValue = addressStageMint[msg.sender];\n            uint256 alreadyMintedByWallet = (mintValue >> _MINT_BITS_TOTAL) & _MINT_BITS;\n            if (ms.walletMaxLimit > 0) {\n                // remaining count = (wallet's max count) - minted\n                require(ms.walletMaxLimit > alreadyMintedByWallet, WALLET_LIMIT_EXCEEDED);\n                if (alreadyMintedByWallet + availableCount > ms.walletMaxLimit) {\n                    unchecked {\n                        availableCount = ms.walletMaxLimit - alreadyMintedByWallet;\n                    }\n                }\n            }\n\n            uint256 minterStageAlreadyMinted = (mintValue >> (stageIdx * _MINT_BITS_LENGTH)) & _MINT_BITS;\n\n            if (ms.walletStageLimit > 0) {\n                require(ms.walletStageLimit > minterStageAlreadyMinted, WALLET_STAGE_LIMIT_EXCEEDED);\n                if (minterStageAlreadyMinted + availableCount > ms.walletStageLimit) {\n                    unchecked {\n                        availableCount = ms.walletStageLimit - minterStageAlreadyMinted;\n                    }\n                }\n            }\n\n            if (alreadyMinted + availableCount > stageLimit) {\n                unchecked {\n                    availableCount = stageLimit - alreadyMinted;\n                }\n            }\n\n            minterStageAlreadyMinted = minterStageAlreadyMinted + availableCount;\n            alreadyMintedByWallet = alreadyMintedByWallet + availableCount;\n\n            uint256 newValue = (alreadyMintedByWallet << _MINT_BITS_TOTAL) |\n                (minterStageAlreadyMinted << (stageIdx * _MINT_BITS_LENGTH));\n            uint256 mask = (_MINT_BITS << _MINT_BITS_TOTAL) | (_MINT_BITS << (stageIdx * _MINT_BITS_LENGTH));\n            addressStageMint[msg.sender] = ((~mask) & mintValue) | newValue;\n        }\n\n        _mint(msg.sender, availableCount);\n\n        unchecked {\n            uint256 reimbursement = (ms.quantity - availableCount) * ms.price;\n            if (0 < reimbursement && reimbursement < msg.value) {\n                (bool sent, ) = msg.sender.call{value: reimbursement}(\"\");\n                require(sent, \"Failed to send Ether\");\n            }\n        }\n\n        // Mint(address to, uint8 stage, uint256 startTokenId, uint256 quantity, uint256 price)\n        emit Mint(msg.sender, ms.stage, beginTokenId, availableCount, ms.price);\n    }\n\n    function getStageMintedCount(address minter, uint8 stage) external view returns (uint256) {\n        require(stage > 0 && stage <= 10, STAGE_EXCEEDED);\n        return ((addressStageMint[minter] >> ((stage - 1) * _MINT_BITS_LENGTH)) & _MINT_BITS);\n    }\n\n    function burn(uint256 tokenId) external {\n        require(burnable, \"The collection doesn't permit burned.\");\n        require(msg.sender == ownerOf(tokenId), OWNER_ERROR);\n        _burn(tokenId);\n    }\n\n    function hashTransaction(address address_, address sender, MintData memory ms) private pure returns (bytes32) {\n        bytes32 hash = keccak256(\n            abi.encodePacked(\n                \"\\x19Ethereum Signed Message:\\n32\",\n                keccak256(\n                    abi.encodePacked(\n                        address_,\n                        sender,\n                        ms.walletMaxLimit,\n                        ms.stage,\n                        ms.stageLimit,\n                        ms.walletStageLimit,\n                        ms.quantity,\n                        ms.price,\n                        ms.nonce\n                    )\n                )\n            )\n        );\n        return hash;\n    }\n\n    // =============================================================\n    //                          OWNERSHIP\n    // =============================================================\n    function transferOwnership(address newOwner) external onlyOwner {\n        _pendingOwner = newOwner;\n        emit OwnershipTransferStarted(owner, newOwner);\n    }\n\n    function pendingOwner() public view virtual returns (address) {\n        return _pendingOwner;\n    }\n\n    function acceptOwnership() external {\n        address sender = msg.sender;\n        require(pendingOwner() == sender, OWNER_ERROR);\n\n        delete _pendingOwner;\n\n        address oldOwner = owner;\n        owner = sender;\n        emit OwnershipTransferred(oldOwner, sender);\n    }\n\n    // =============================================================\n    //                           WITHDRAW\n    // =============================================================\n    function withdraw() external payable onlyOwnerOrPlatform {\n        address feeTreasury = viewWithdraw();\n        require(feeTreasury != address(0), CANNOT_USE_ZERO);\n\n        uint96 feeRate = getFeeRate();\n\n        uint256 feeAmount = (address(this).balance * feeRate) / 10000;\n        (bool success, ) = payable(feeTreasury).call{value: feeAmount}(\"\");\n        require(success, \"withdraw may have reverted\");\n\n        uint256 transferAmount = address(this).balance;\n        address treasury = _treasury == address(0) ? owner : _treasury;\n        payable(treasury).transfer(transferAmount);\n\n        emit BalanceChanged(feeAmount, transferAmount);\n    }\n\n    // =============================================================\n    //                       VARIABLES EDIT\n    // =============================================================\n    function setBaseURI(string calldata baseURI_) external onlyOwner {\n        if (!lockURI) {\n            emit TokenURIChanged(baseURI, baseURI_, 0);\n            baseURI = baseURI_;\n        }\n    }\n\n    function setRevealURI(string calldata revealURI_) external onlyOwner {\n        if (!lockURI) {\n            emit TokenURIChanged(revealURI, revealURI_, 1);\n            revealURI = revealURI_;\n        }\n    }\n\n    function setContractURI(string calldata contractURI_) external onlyOwner {\n        if (!lockURI) {\n            contractURI = contractURI_;\n        }\n    }\n\n    // =============================================================\n    //                           OTHERS\n    // =============================================================\n    function lockURIForever() external onlyOwner {\n        lockURI = true;\n    }\n\n    // =============================================================\n    //                     Proxy Public Methods.\n    // =============================================================\n    function numberMinted(address owner_) public view returns (uint256) {\n        return _numberMinted(owner_);\n    }\n\n    function numberBurned(address owner_) public view returns (uint256) {\n        return _numberBurned(owner_);\n    }\n\n    function totalMinted() public view returns (uint256) {\n        return _totalMinted();\n    }\n\n    function totalBurned() public view returns (uint256) {\n        return _totalBurned();\n    }\n\n    function startTokenId() public view returns (uint256) {\n        return _startTokenId();\n    }\n\n    function nextTokenId() public view returns (uint256) {\n        return _nextTokenId();\n    }\n\n    // =============================================================\n    //                     Override Methods For OpenSea Operator.\n    // =============================================================\n    function setApprovalForAll(address operator, bool approved) public override onlyAllowedOperatorApproval(operator) {\n        super.setApprovalForAll(operator, approved);\n    }\n\n    function approve(address operator, uint256 tokenId) public payable override onlyAllowedOperatorApproval(operator) {\n        super.approve(operator, tokenId);\n    }\n\n    function transferFrom(address from, address to, uint256 tokenId) public payable override onlyAllowedOperator(from) {\n        super.transferFrom(from, to, tokenId);\n    }\n\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 tokenId\n    ) public payable override onlyAllowedOperator(from) {\n        super.safeTransferFrom(from, to, tokenId);\n    }\n\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 tokenId,\n        bytes memory data\n    ) public payable override onlyAllowedOperator(from) {\n        super.safeTransferFrom(from, to, tokenId, data);\n    }\n}\n"
    },
    "contracts/interfaces/IDorado.sol": {
      "content": "// SPDX-License-Identifier: GPL-3.0\npragma solidity ^0.8.13;\n\ninterface IDorado {\n    function viewSigner() external view returns (address);\n\n    function viewWithdraw() external view returns (address);\n\n    function getFeeRateOf(address collection) external view returns (uint16);\n}\n"
    },
    "contracts/interfaces/IDoradoLogic.sol": {
      "content": "// SPDX-License-Identifier: GPL-3.0\npragma solidity ^0.8.13;\n\ninterface IDoradoLogic {\n    struct MintData {\n        uint64 walletMaxLimit;\n        uint8 stage;\n        uint64 stageLimit;\n        uint64 walletStageLimit;\n        uint64 quantity;\n        uint256 price;\n        uint256 nonce;\n    }\n\n    function initialize(\n        string calldata name_,\n        string calldata symbol_,\n        uint64 maxTokens_,\n        bool burnable_,\n        uint96 feeNumerator_,\n        address treasury_,\n        string[] calldata uris\n    ) external;\n}\n"
    },
    "openzeppelin-contracts-upgradeable/proxy/utils/Initializable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (proxy/utils/Initializable.sol)\n\npragma solidity ^0.8.2;\n\nimport \"../../utils/AddressUpgradeable.sol\";\n\n/**\n * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be\n * reused. This mechanism prevents re-execution of each \"step\" but allows the creation of new initialization steps in\n * case an upgrade adds a module that needs to be initialized.\n *\n * For example:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * contract MyToken is ERC20Upgradeable {\n *     function initialize() initializer public {\n *         __ERC20_init(\"MyToken\", \"MTK\");\n *     }\n * }\n * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {\n *     function initializeV2() reinitializer(2) public {\n *         __ERC20Permit_init(\"MyToken\");\n *     }\n * }\n * ```\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n *\n * [CAUTION]\n * ====\n * Avoid leaving a contract uninitialized.\n *\n * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation\n * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke\n * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * /// @custom:oz-upgrades-unsafe-allow constructor\n * constructor() {\n *     _disableInitializers();\n * }\n * ```\n * ====\n */\nabstract contract Initializable {\n    /**\n     * @dev Indicates that the contract has been initialized.\n     * @custom:oz-retyped-from bool\n     */\n    uint8 private _initialized;\n\n    /**\n     * @dev Indicates that the contract is in the process of being initialized.\n     */\n    bool private _initializing;\n\n    /**\n     * @dev Triggered when the contract has been initialized or reinitialized.\n     */\n    event Initialized(uint8 version);\n\n    /**\n     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,\n     * `onlyInitializing` functions can be used to initialize parent contracts.\n     *\n     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a\n     * constructor.\n     *\n     * Emits an {Initialized} event.\n     */\n    modifier initializer() {\n        bool isTopLevelCall = !_initializing;\n        require(\n            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),\n            \"Initializable: contract is already initialized\"\n        );\n        _initialized = 1;\n        if (isTopLevelCall) {\n            _initializing = true;\n        }\n        _;\n        if (isTopLevelCall) {\n            _initializing = false;\n            emit Initialized(1);\n        }\n    }\n\n    /**\n     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the\n     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be\n     * used to initialize parent contracts.\n     *\n     * A reinitializer may be used after the original initialization step. This is essential to configure modules that\n     * are added through upgrades and that require initialization.\n     *\n     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`\n     * cannot be nested. If one is invoked in the context of another, execution will revert.\n     *\n     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in\n     * a contract, executing them in the right order is up to the developer or operator.\n     *\n     * WARNING: setting the version to 255 will prevent any future reinitialization.\n     *\n     * Emits an {Initialized} event.\n     */\n    modifier reinitializer(uint8 version) {\n        require(!_initializing && _initialized < version, \"Initializable: contract is already initialized\");\n        _initialized = version;\n        _initializing = true;\n        _;\n        _initializing = false;\n        emit Initialized(version);\n    }\n\n    /**\n     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\n     * {initializer} and {reinitializer} modifiers, directly or indirectly.\n     */\n    modifier onlyInitializing() {\n        require(_initializing, \"Initializable: contract is not initializing\");\n        _;\n    }\n\n    /**\n     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.\n     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized\n     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called\n     * through proxies.\n     *\n     * Emits an {Initialized} event the first time it is successfully executed.\n     */\n    function _disableInitializers() internal virtual {\n        require(!_initializing, \"Initializable: contract is initializing\");\n        if (_initialized < type(uint8).max) {\n            _initialized = type(uint8).max;\n            emit Initialized(type(uint8).max);\n        }\n    }\n\n    /**\n     * @dev Internal function that returns the initialized version. Returns `_initialized`\n     */\n    function _getInitializedVersion() internal view returns (uint8) {\n        return _initialized;\n    }\n\n    /**\n     * @dev Internal function that returns the initialized version. Returns `_initializing`\n     */\n    function _isInitializing() internal view returns (bool) {\n        return _initializing;\n    }\n}\n"
    },
    "openzeppelin-contracts-upgradeable/utils/AddressUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary AddressUpgradeable {\n    /**\n     * @dev Returns true if `account` is a contract.\n     *\n     * [IMPORTANT]\n     * ====\n     * It is unsafe to assume that an address for which this function returns\n     * false is an externally-owned account (EOA) and not a contract.\n     *\n     * Among others, `isContract` will return false for the following\n     * types of addresses:\n     *\n     *  - an externally-owned account\n     *  - a contract in construction\n     *  - an address where a contract will be created\n     *  - an address where a contract lived, but was destroyed\n     * ====\n     *\n     * [IMPORTANT]\n     * ====\n     * You shouldn't rely on `isContract` to protect against flash loan attacks!\n     *\n     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n     * constructor.\n     * ====\n     */\n    function isContract(address account) internal view returns (bool) {\n        // This method relies on extcodesize/address.code.length, which returns 0\n        // for contracts in construction, since the code is only stored at the end\n        // of the constructor execution.\n\n        return account.code.length > 0;\n    }\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n        (bool success, ) = recipient.call{value: amount}(\"\");\n        require(success, \"Address: unable to send value, recipient may have reverted\");\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason, it is bubbled up by this\n     * function (like regular Solidity function calls).\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, \"Address: low-level call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n     * `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n     * with `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        require(address(this).balance >= value, \"Address: insufficient balance for call\");\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        return functionStaticCall(target, data, \"Address: low-level static call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal view returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling\n     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.\n     *\n     * _Available since v4.8._\n     */\n    function verifyCallResultFromTarget(\n        address target,\n        bool success,\n        bytes memory returndata,\n        string memory errorMessage\n    ) internal view returns (bytes memory) {\n        if (success) {\n            if (returndata.length == 0) {\n                // only check isContract if the call was successful and the return data is empty\n                // otherwise we already know that it was a contract\n                require(isContract(target), \"Address: call to non-contract\");\n            }\n            return returndata;\n        } else {\n            _revert(returndata, errorMessage);\n        }\n    }\n\n    /**\n     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the\n     * revert reason or using the provided one.\n     *\n     * _Available since v4.3._\n     */\n    function verifyCallResult(\n        bool success,\n        bytes memory returndata,\n        string memory errorMessage\n    ) internal pure returns (bytes memory) {\n        if (success) {\n            return returndata;\n        } else {\n            _revert(returndata, errorMessage);\n        }\n    }\n\n    function _revert(bytes memory returndata, string memory errorMessage) private pure {\n        // Look for revert reason and bubble it up if present\n        if (returndata.length > 0) {\n            // The easiest way to bubble the revert reason is using memory via assembly\n            /// @solidity memory-safe-assembly\n            assembly {\n                let returndata_size := mload(returndata)\n                revert(add(32, returndata), returndata_size)\n            }\n        } else {\n            revert(errorMessage);\n        }\n    }\n}\n"
    }
  },
  "settings": {
    "optimizer": {
      "enabled": true,
      "runs": 1000
    },
    "outputSelection": {
      "*": {
        "*": [
          "evm.bytecode",
          "evm.deployedBytecode",
          "devdoc",
          "userdoc",
          "metadata",
          "abi"
        ]
      }
    },
    "libraries": {}
  }
}