organized_contracts/18/1808dac5483a3d066faf9b73c9d5f5910d50e3b3a61ad9c6fd71b0c33326268d/contract.json

{
  "language": "Solidity",
  "sources": {
    "contracts/AmplificationUtils.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity 0.6.12;\n\nimport \"@openzeppelin/contracts/token/ERC20/SafeERC20.sol\";\nimport \"./SwapUtils.sol\";\n\n/**\n * @title AmplificationUtils library\n * @notice A library to calculate and ramp the A parameter of a given `SwapUtils.Swap` struct.\n * This library assumes the struct is fully validated.\n */\nlibrary AmplificationUtils {\n    using SafeMath for uint256;\n\n    event RampA(\n        uint256 oldA,\n        uint256 newA,\n        uint256 initialTime,\n        uint256 futureTime\n    );\n    event StopRampA(uint256 currentA, uint256 time);\n\n    // Constant values used in ramping A calculations\n    uint256 public constant A_PRECISION = 100;\n    uint256 public constant MAX_A = 10**6;\n    uint256 private constant MAX_A_CHANGE = 2;\n    uint256 private constant MIN_RAMP_TIME = 14 days;\n\n    /**\n     * @notice Return A, the amplification coefficient * n * (n - 1)\n     * @dev See the StableSwap paper for details\n     * @param self Swap struct to read from\n     * @return A parameter\n     */\n    function getA(SwapUtils.Swap storage self) external view returns (uint256) {\n        return _getAPrecise(self).div(A_PRECISION);\n    }\n\n    /**\n     * @notice Return A in its raw precision\n     * @dev See the StableSwap paper for details\n     * @param self Swap struct to read from\n     * @return A parameter in its raw precision form\n     */\n    function getAPrecise(SwapUtils.Swap storage self)\n        external\n        view\n        returns (uint256)\n    {\n        return _getAPrecise(self);\n    }\n\n    /**\n     * @notice Return A in its raw precision\n     * @dev See the StableSwap paper for details\n     * @param self Swap struct to read from\n     * @return A parameter in its raw precision form\n     */\n    function _getAPrecise(SwapUtils.Swap storage self)\n        internal\n        view\n        returns (uint256)\n    {\n        uint256 t1 = self.futureATime; // time when ramp is finished\n        uint256 a1 = self.futureA; // final A value when ramp is finished\n\n        if (block.timestamp < t1) {\n            uint256 t0 = self.initialATime; // time when ramp is started\n            uint256 a0 = self.initialA; // initial A value when ramp is started\n            if (a1 > a0) {\n                // a0 + (a1 - a0) * (block.timestamp - t0) / (t1 - t0)\n                return\n                    a0.add(\n                        a1.sub(a0).mul(block.timestamp.sub(t0)).div(t1.sub(t0))\n                    );\n            } else {\n                // a0 - (a0 - a1) * (block.timestamp - t0) / (t1 - t0)\n                return\n                    a0.sub(\n                        a0.sub(a1).mul(block.timestamp.sub(t0)).div(t1.sub(t0))\n                    );\n            }\n        } else {\n            return a1;\n        }\n    }\n\n    /**\n     * @notice Start ramping up or down A parameter towards given futureA_ and futureTime_\n     * Checks if the change is too rapid, and commits the new A value only when it falls under\n     * the limit range.\n     * @param self Swap struct to update\n     * @param futureA_ the new A to ramp towards\n     * @param futureTime_ timestamp when the new A should be reached\n     */\n    function rampA(\n        SwapUtils.Swap storage self,\n        uint256 futureA_,\n        uint256 futureTime_\n    ) external {\n        require(\n            block.timestamp >= self.initialATime.add(1 days),\n            \"Wait 1 day before starting ramp\"\n        );\n        require(\n            futureTime_ >= block.timestamp.add(MIN_RAMP_TIME),\n            \"Insufficient ramp time\"\n        );\n        require(\n            futureA_ > 0 && futureA_ < MAX_A,\n            \"futureA_ must be > 0 and < MAX_A\"\n        );\n\n        uint256 initialAPrecise = _getAPrecise(self);\n        uint256 futureAPrecise = futureA_.mul(A_PRECISION);\n\n        if (futureAPrecise < initialAPrecise) {\n            require(\n                futureAPrecise.mul(MAX_A_CHANGE) >= initialAPrecise,\n                \"futureA_ is too small\"\n            );\n        } else {\n            require(\n                futureAPrecise <= initialAPrecise.mul(MAX_A_CHANGE),\n                \"futureA_ is too large\"\n            );\n        }\n\n        self.initialA = initialAPrecise;\n        self.futureA = futureAPrecise;\n        self.initialATime = block.timestamp;\n        self.futureATime = futureTime_;\n\n        emit RampA(\n            initialAPrecise,\n            futureAPrecise,\n            block.timestamp,\n            futureTime_\n        );\n    }\n\n    /**\n     * @notice Stops ramping A immediately. Once this function is called, rampA()\n     * cannot be called for another 24 hours\n     * @param self Swap struct to update\n     */\n    function stopRampA(SwapUtils.Swap storage self) external {\n        require(self.futureATime > block.timestamp, \"Ramp is already stopped\");\n\n        uint256 currentA = _getAPrecise(self);\n        self.initialA = currentA;\n        self.futureA = currentA;\n        self.initialATime = block.timestamp;\n        self.futureATime = block.timestamp;\n\n        emit StopRampA(currentA, block.timestamp);\n    }\n}\n"
    },
    "contracts/SwapUtils.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity 0.6.12;\n\nimport \"@openzeppelin/contracts/math/SafeMath.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/SafeERC20.sol\";\nimport \"./AmplificationUtils.sol\";\nimport \"./LPToken.sol\";\nimport \"./MathUtils.sol\";\n\n/**\n * @title SwapUtils library\n * @notice A library to be used within Swap.sol. Contains functions responsible for custody and AMM functionalities.\n * @dev Contracts relying on this library must initialize SwapUtils.Swap struct then use this library\n * for SwapUtils.Swap struct. Note that this library contains both functions called by users and admins.\n * Admin functions should be protected within contracts using this library.\n */\nlibrary SwapUtils {\n    using SafeERC20 for IERC20;\n    using SafeMath for uint256;\n    using MathUtils for uint256;\n\n    /*** EVENTS ***/\n\n    event TokenSwap(\n        address indexed buyer,\n        uint256 tokensSold,\n        uint256 tokensBought,\n        uint128 soldId,\n        uint128 boughtId\n    );\n    event AddLiquidity(\n        address indexed provider,\n        uint256[] tokenAmounts,\n        uint256[] fees,\n        uint256 invariant,\n        uint256 lpTokenSupply\n    );\n    event RemoveLiquidity(\n        address indexed provider,\n        uint256[] tokenAmounts,\n        uint256 lpTokenSupply\n    );\n    event RemoveLiquidityOne(\n        address indexed provider,\n        uint256 lpTokenAmount,\n        uint256 lpTokenSupply,\n        uint256 boughtId,\n        uint256 tokensBought\n    );\n    event RemoveLiquidityImbalance(\n        address indexed provider,\n        uint256[] tokenAmounts,\n        uint256[] fees,\n        uint256 invariant,\n        uint256 lpTokenSupply\n    );\n    event NewAdminFee(uint256 newAdminFee);\n    event NewSwapFee(uint256 newSwapFee);\n\n    struct Swap {\n        // variables around the ramp management of A,\n        // the amplification coefficient * n * (n - 1)\n        // see https://www.curve.fi/stableswap-paper.pdf for details\n        uint256 initialA;\n        uint256 futureA;\n        uint256 initialATime;\n        uint256 futureATime;\n        // fee calculation\n        uint256 swapFee;\n        uint256 adminFee;\n        LPToken lpToken;\n        // contract references for all tokens being pooled\n        IERC20[] pooledTokens;\n        // multipliers for each pooled token's precision to get to POOL_PRECISION_DECIMALS\n        // for example, TBTC has 18 decimals, so the multiplier should be 1. WBTC\n        // has 8, so the multiplier should be 10 ** 18 / 10 ** 8 => 10 ** 10\n        uint256[] tokenPrecisionMultipliers;\n        // the pool balance of each token, in the token's precision\n        // the contract's actual token balance might differ\n        uint256[] balances;\n    }\n\n    // Struct storing variables used in calculations in the\n    // calculateWithdrawOneTokenDY function to avoid stack too deep errors\n    struct CalculateWithdrawOneTokenDYInfo {\n        uint256 d0;\n        uint256 d1;\n        uint256 newY;\n        uint256 feePerToken;\n        uint256 preciseA;\n    }\n\n    // Struct storing variables used in calculations in the\n    // {add,remove}Liquidity functions to avoid stack too deep errors\n    struct ManageLiquidityInfo {\n        uint256 d0;\n        uint256 d1;\n        uint256 d2;\n        uint256 preciseA;\n        LPToken lpToken;\n        uint256 totalSupply;\n        uint256[] balances;\n        uint256[] multipliers;\n    }\n\n    // the precision all pools tokens will be converted to\n    uint8 public constant POOL_PRECISION_DECIMALS = 18;\n\n    // the denominator used to calculate admin and LP fees. For example, an\n    // LP fee might be something like tradeAmount.mul(fee).div(FEE_DENOMINATOR)\n    uint256 private constant FEE_DENOMINATOR = 10**10;\n\n    // Max swap fee is 1% or 100bps of each swap\n    uint256 public constant MAX_SWAP_FEE = 10**8;\n\n    // Max adminFee is 100% of the swapFee\n    // adminFee does not add additional fee on top of swapFee\n    // Instead it takes a certain % of the swapFee. Therefore it has no impact on the\n    // users but only on the earnings of LPs\n    uint256 public constant MAX_ADMIN_FEE = 10**10;\n\n    // Constant value used as max loop limit\n    uint256 private constant MAX_LOOP_LIMIT = 256;\n\n    /*** VIEW & PURE FUNCTIONS ***/\n\n    function _getAPrecise(Swap storage self) internal view returns (uint256) {\n        return AmplificationUtils._getAPrecise(self);\n    }\n\n    /**\n     * @notice Calculate the dy, the amount of selected token that user receives and\n     * the fee of withdrawing in one token\n     * @param tokenAmount the amount to withdraw in the pool's precision\n     * @param tokenIndex which token will be withdrawn\n     * @param self Swap struct to read from\n     * @return the amount of token user will receive\n     */\n    function calculateWithdrawOneToken(\n        Swap storage self,\n        uint256 tokenAmount,\n        uint8 tokenIndex\n    ) external view returns (uint256) {\n        (uint256 availableTokenAmount, ) = _calculateWithdrawOneToken(\n            self,\n            tokenAmount,\n            tokenIndex,\n            self.lpToken.totalSupply()\n        );\n        return availableTokenAmount;\n    }\n\n    function _calculateWithdrawOneToken(\n        Swap storage self,\n        uint256 tokenAmount,\n        uint8 tokenIndex,\n        uint256 totalSupply\n    ) internal view returns (uint256, uint256) {\n        uint256 dy;\n        uint256 newY;\n        uint256 currentY;\n\n        (dy, newY, currentY) = calculateWithdrawOneTokenDY(\n            self,\n            tokenIndex,\n            tokenAmount,\n            totalSupply\n        );\n\n        // dy_0 (without fees)\n        // dy, dy_0 - dy\n\n        uint256 dySwapFee = currentY\n            .sub(newY)\n            .div(self.tokenPrecisionMultipliers[tokenIndex])\n            .sub(dy);\n\n        return (dy, dySwapFee);\n    }\n\n    /**\n     * @notice Calculate the dy of withdrawing in one token\n     * @param self Swap struct to read from\n     * @param tokenIndex which token will be withdrawn\n     * @param tokenAmount the amount to withdraw in the pools precision\n     * @return the d and the new y after withdrawing one token\n     */\n    function calculateWithdrawOneTokenDY(\n        Swap storage self,\n        uint8 tokenIndex,\n        uint256 tokenAmount,\n        uint256 totalSupply\n    )\n        internal\n        view\n        returns (\n            uint256,\n            uint256,\n            uint256\n        )\n    {\n        // Get the current D, then solve the stableswap invariant\n        // y_i for D - tokenAmount\n        uint256[] memory xp = _xp(self);\n\n        require(tokenIndex < xp.length, \"Token index out of range\");\n\n        CalculateWithdrawOneTokenDYInfo\n            memory v = CalculateWithdrawOneTokenDYInfo(0, 0, 0, 0, 0);\n        v.preciseA = _getAPrecise(self);\n        v.d0 = getD(xp, v.preciseA);\n        v.d1 = v.d0.sub(tokenAmount.mul(v.d0).div(totalSupply));\n\n        require(tokenAmount <= xp[tokenIndex], \"Withdraw exceeds available\");\n\n        v.newY = getYD(v.preciseA, tokenIndex, xp, v.d1);\n\n        uint256[] memory xpReduced = new uint256[](xp.length);\n\n        v.feePerToken = _feePerToken(self.swapFee, xp.length);\n        for (uint256 i = 0; i < xp.length; i++) {\n            uint256 xpi = xp[i];\n            // if i == tokenIndex, dxExpected = xp[i] * d1 / d0 - newY\n            // else dxExpected = xp[i] - (xp[i] * d1 / d0)\n            // xpReduced[i] -= dxExpected * fee / FEE_DENOMINATOR\n            xpReduced[i] = xpi.sub(\n                (\n                    (i == tokenIndex)\n                        ? xpi.mul(v.d1).div(v.d0).sub(v.newY)\n                        : xpi.sub(xpi.mul(v.d1).div(v.d0))\n                ).mul(v.feePerToken).div(FEE_DENOMINATOR)\n            );\n        }\n\n        uint256 dy = xpReduced[tokenIndex].sub(\n            getYD(v.preciseA, tokenIndex, xpReduced, v.d1)\n        );\n        dy = dy.sub(1).div(self.tokenPrecisionMultipliers[tokenIndex]);\n\n        return (dy, v.newY, xp[tokenIndex]);\n    }\n\n    /**\n     * @notice Calculate the price of a token in the pool with given\n     * precision-adjusted balances and a particular D.\n     *\n     * @dev This is accomplished via solving the invariant iteratively.\n     * See the StableSwap paper and Curve.fi implementation for further details.\n     *\n     * x_1**2 + x1 * (sum' - (A*n**n - 1) * D / (A * n**n)) = D ** (n + 1) / (n ** (2 * n) * prod' * A)\n     * x_1**2 + b*x_1 = c\n     * x_1 = (x_1**2 + c) / (2*x_1 + b)\n     *\n     * @param a the amplification coefficient * n * (n - 1). See the StableSwap paper for details.\n     * @param tokenIndex Index of token we are calculating for.\n     * @param xp a precision-adjusted set of pool balances. Array should be\n     * the same cardinality as the pool.\n     * @param d the stableswap invariant\n     * @return the price of the token, in the same precision as in xp\n     */\n    function getYD(\n        uint256 a,\n        uint8 tokenIndex,\n        uint256[] memory xp,\n        uint256 d\n    ) internal pure returns (uint256) {\n        uint256 numTokens = xp.length;\n        require(tokenIndex < numTokens, \"Token not found\");\n\n        uint256 c = d;\n        uint256 s;\n        uint256 nA = a.mul(numTokens);\n\n        for (uint256 i = 0; i < numTokens; i++) {\n            if (i != tokenIndex) {\n                s = s.add(xp[i]);\n                c = c.mul(d).div(xp[i].mul(numTokens));\n                // If we were to protect the division loss we would have to keep the denominator separate\n                // and divide at the end. However this leads to overflow with large numTokens or/and D.\n                // c = c * D * D * D * ... overflow!\n            }\n        }\n        c = c.mul(d).mul(AmplificationUtils.A_PRECISION).div(nA.mul(numTokens));\n\n        uint256 b = s.add(d.mul(AmplificationUtils.A_PRECISION).div(nA));\n        uint256 yPrev;\n        uint256 y = d;\n        for (uint256 i = 0; i < MAX_LOOP_LIMIT; i++) {\n            yPrev = y;\n            y = y.mul(y).add(c).div(y.mul(2).add(b).sub(d));\n            if (y.within1(yPrev)) {\n                return y;\n            }\n        }\n        revert(\"Approximation did not converge\");\n    }\n\n    /**\n     * @notice Get D, the StableSwap invariant, based on a set of balances and a particular A.\n     * @param xp a precision-adjusted set of pool balances. Array should be the same cardinality\n     * as the pool.\n     * @param a the amplification coefficient * n * (n - 1) in A_PRECISION.\n     * See the StableSwap paper for details\n     * @return the invariant, at the precision of the pool\n     */\n    function getD(uint256[] memory xp, uint256 a)\n        internal\n        pure\n        returns (uint256)\n    {\n        uint256 numTokens = xp.length;\n        uint256 s;\n        for (uint256 i = 0; i < numTokens; i++) {\n            s = s.add(xp[i]);\n        }\n        if (s == 0) {\n            return 0;\n        }\n\n        uint256 prevD;\n        uint256 d = s;\n        uint256 nA = a.mul(numTokens);\n\n        for (uint256 i = 0; i < MAX_LOOP_LIMIT; i++) {\n            uint256 dP = d;\n            for (uint256 j = 0; j < numTokens; j++) {\n                dP = dP.mul(d).div(xp[j].mul(numTokens));\n                // If we were to protect the division loss we would have to keep the denominator separate\n                // and divide at the end. However this leads to overflow with large numTokens or/and D.\n                // dP = dP * D * D * D * ... overflow!\n            }\n            prevD = d;\n            d = nA\n                .mul(s)\n                .div(AmplificationUtils.A_PRECISION)\n                .add(dP.mul(numTokens))\n                .mul(d)\n                .div(\n                    nA\n                        .sub(AmplificationUtils.A_PRECISION)\n                        .mul(d)\n                        .div(AmplificationUtils.A_PRECISION)\n                        .add(numTokens.add(1).mul(dP))\n                );\n            if (d.within1(prevD)) {\n                return d;\n            }\n        }\n\n        // Convergence should occur in 4 loops or less. If this is reached, there may be something wrong\n        // with the pool. If this were to occur repeatedly, LPs should withdraw via `removeLiquidity()`\n        // function which does not rely on D.\n        revert(\"D does not converge\");\n    }\n\n    /**\n     * @notice Given a set of balances and precision multipliers, return the\n     * precision-adjusted balances.\n     *\n     * @param balances an array of token balances, in their native precisions.\n     * These should generally correspond with pooled tokens.\n     *\n     * @param precisionMultipliers an array of multipliers, corresponding to\n     * the amounts in the balances array. When multiplied together they\n     * should yield amounts at the pool's precision.\n     *\n     * @return an array of amounts \"scaled\" to the pool's precision\n     */\n    function _xp(\n        uint256[] memory balances,\n        uint256[] memory precisionMultipliers\n    ) internal pure returns (uint256[] memory) {\n        uint256 numTokens = balances.length;\n        require(\n            numTokens == precisionMultipliers.length,\n            \"Balances must match multipliers\"\n        );\n        uint256[] memory xp = new uint256[](numTokens);\n        for (uint256 i = 0; i < numTokens; i++) {\n            xp[i] = balances[i].mul(precisionMultipliers[i]);\n        }\n        return xp;\n    }\n\n    /**\n     * @notice Return the precision-adjusted balances of all tokens in the pool\n     * @param self Swap struct to read from\n     * @return the pool balances \"scaled\" to the pool's precision, allowing\n     * them to be more easily compared.\n     */\n    function _xp(Swap storage self) internal view returns (uint256[] memory) {\n        return _xp(self.balances, self.tokenPrecisionMultipliers);\n    }\n\n    /**\n     * @notice Get the virtual price, to help calculate profit\n     * @param self Swap struct to read from\n     * @return the virtual price, scaled to precision of POOL_PRECISION_DECIMALS\n     */\n    function getVirtualPrice(Swap storage self)\n        external\n        view\n        returns (uint256)\n    {\n        uint256 d = getD(_xp(self), _getAPrecise(self));\n        LPToken lpToken = self.lpToken;\n        uint256 supply = lpToken.totalSupply();\n        if (supply > 0) {\n            return d.mul(10**uint256(POOL_PRECISION_DECIMALS)).div(supply);\n        }\n        return 0;\n    }\n\n    /**\n     * @notice Calculate the new balances of the tokens given the indexes of the token\n     * that is swapped from (FROM) and the token that is swapped to (TO).\n     * This function is used as a helper function to calculate how much TO token\n     * the user should receive on swap.\n     *\n     * @param preciseA precise form of amplification coefficient\n     * @param tokenIndexFrom index of FROM token\n     * @param tokenIndexTo index of TO token\n     * @param x the new total amount of FROM token\n     * @param xp balances of the tokens in the pool\n     * @return the amount of TO token that should remain in the pool\n     */\n    function getY(\n        uint256 preciseA,\n        uint8 tokenIndexFrom,\n        uint8 tokenIndexTo,\n        uint256 x,\n        uint256[] memory xp\n    ) internal pure returns (uint256) {\n        uint256 numTokens = xp.length;\n        require(\n            tokenIndexFrom != tokenIndexTo,\n            \"Can't compare token to itself\"\n        );\n        require(\n            tokenIndexFrom < numTokens && tokenIndexTo < numTokens,\n            \"Tokens must be in pool\"\n        );\n\n        uint256 d = getD(xp, preciseA);\n        uint256 c = d;\n        uint256 s;\n        uint256 nA = numTokens.mul(preciseA);\n\n        uint256 _x;\n        for (uint256 i = 0; i < numTokens; i++) {\n            if (i == tokenIndexFrom) {\n                _x = x;\n            } else if (i != tokenIndexTo) {\n                _x = xp[i];\n            } else {\n                continue;\n            }\n            s = s.add(_x);\n            c = c.mul(d).div(_x.mul(numTokens));\n            // If we were to protect the division loss we would have to keep the denominator separate\n            // and divide at the end. However this leads to overflow with large numTokens or/and D.\n            // c = c * D * D * D * ... overflow!\n        }\n        c = c.mul(d).mul(AmplificationUtils.A_PRECISION).div(nA.mul(numTokens));\n        uint256 b = s.add(d.mul(AmplificationUtils.A_PRECISION).div(nA));\n        uint256 yPrev;\n        uint256 y = d;\n\n        // iterative approximation\n        for (uint256 i = 0; i < MAX_LOOP_LIMIT; i++) {\n            yPrev = y;\n            y = y.mul(y).add(c).div(y.mul(2).add(b).sub(d));\n            if (y.within1(yPrev)) {\n                return y;\n            }\n        }\n        revert(\"Approximation did not converge\");\n    }\n\n    /**\n     * @notice Externally calculates a swap between two tokens.\n     * @param self Swap struct to read from\n     * @param tokenIndexFrom the token to sell\n     * @param tokenIndexTo the token to buy\n     * @param dx the number of tokens to sell. If the token charges a fee on transfers,\n     * use the amount that gets transferred after the fee.\n     * @return dy the number of tokens the user will get\n     */\n    function calculateSwap(\n        Swap storage self,\n        uint8 tokenIndexFrom,\n        uint8 tokenIndexTo,\n        uint256 dx\n    ) external view returns (uint256 dy) {\n        (dy, ) = _calculateSwap(\n            self,\n            tokenIndexFrom,\n            tokenIndexTo,\n            dx,\n            self.balances\n        );\n    }\n\n    /**\n     * @notice Internally calculates a swap between two tokens.\n     *\n     * @dev The caller is expected to transfer the actual amounts (dx and dy)\n     * using the token contracts.\n     *\n     * @param self Swap struct to read from\n     * @param tokenIndexFrom the token to sell\n     * @param tokenIndexTo the token to buy\n     * @param dx the number of tokens to sell. If the token charges a fee on transfers,\n     * use the amount that gets transferred after the fee.\n     * @return dy the number of tokens the user will get\n     * @return dyFee the associated fee\n     */\n    function _calculateSwap(\n        Swap storage self,\n        uint8 tokenIndexFrom,\n        uint8 tokenIndexTo,\n        uint256 dx,\n        uint256[] memory balances\n    ) internal view returns (uint256 dy, uint256 dyFee) {\n        uint256[] memory multipliers = self.tokenPrecisionMultipliers;\n        uint256[] memory xp = _xp(balances, multipliers);\n        require(\n            tokenIndexFrom < xp.length && tokenIndexTo < xp.length,\n            \"Token index out of range\"\n        );\n        uint256 x = dx.mul(multipliers[tokenIndexFrom]).add(xp[tokenIndexFrom]);\n        uint256 y = getY(\n            _getAPrecise(self),\n            tokenIndexFrom,\n            tokenIndexTo,\n            x,\n            xp\n        );\n        dy = xp[tokenIndexTo].sub(y).sub(1);\n        dyFee = dy.mul(self.swapFee).div(FEE_DENOMINATOR);\n        dy = dy.sub(dyFee).div(multipliers[tokenIndexTo]);\n    }\n\n    /**\n     * @notice A simple method to calculate amount of each underlying\n     * tokens that is returned upon burning given amount of\n     * LP tokens\n     *\n     * @param amount the amount of LP tokens that would to be burned on\n     * withdrawal\n     * @return array of amounts of tokens user will receive\n     */\n    function calculateRemoveLiquidity(Swap storage self, uint256 amount)\n        external\n        view\n        returns (uint256[] memory)\n    {\n        return\n            _calculateRemoveLiquidity(\n                self.balances,\n                amount,\n                self.lpToken.totalSupply()\n            );\n    }\n\n    function _calculateRemoveLiquidity(\n        uint256[] memory balances,\n        uint256 amount,\n        uint256 totalSupply\n    ) internal pure returns (uint256[] memory) {\n        require(amount <= totalSupply, \"Cannot exceed total supply\");\n\n        uint256[] memory amounts = new uint256[](balances.length);\n\n        for (uint256 i = 0; i < balances.length; i++) {\n            amounts[i] = balances[i].mul(amount).div(totalSupply);\n        }\n        return amounts;\n    }\n\n    /**\n     * @notice A simple method to calculate prices from deposits or\n     * withdrawals, excluding fees but including slippage. This is\n     * helpful as an input into the various \"min\" parameters on calls\n     * to fight front-running\n     *\n     * @dev This shouldn't be used outside frontends for user estimates.\n     *\n     * @param self Swap struct to read from\n     * @param amounts an array of token amounts to deposit or withdrawal,\n     * corresponding to pooledTokens. The amount should be in each\n     * pooled token's native precision. If a token charges a fee on transfers,\n     * use the amount that gets transferred after the fee.\n     * @param deposit whether this is a deposit or a withdrawal\n     * @return if deposit was true, total amount of lp token that will be minted and if\n     * deposit was false, total amount of lp token that will be burned\n     */\n    function calculateTokenAmount(\n        Swap storage self,\n        uint256[] calldata amounts,\n        bool deposit\n    ) external view returns (uint256) {\n        uint256 a = _getAPrecise(self);\n        uint256[] memory balances = self.balances;\n        uint256[] memory multipliers = self.tokenPrecisionMultipliers;\n\n        uint256 d0 = getD(_xp(balances, multipliers), a);\n        for (uint256 i = 0; i < balances.length; i++) {\n            if (deposit) {\n                balances[i] = balances[i].add(amounts[i]);\n            } else {\n                balances[i] = balances[i].sub(\n                    amounts[i],\n                    \"Cannot withdraw more than available\"\n                );\n            }\n        }\n        uint256 d1 = getD(_xp(balances, multipliers), a);\n        uint256 totalSupply = self.lpToken.totalSupply();\n\n        if (deposit) {\n            return d1.sub(d0).mul(totalSupply).div(d0);\n        } else {\n            return d0.sub(d1).mul(totalSupply).div(d0);\n        }\n    }\n\n    /**\n     * @notice return accumulated amount of admin fees of the token with given index\n     * @param self Swap struct to read from\n     * @param index Index of the pooled token\n     * @return admin balance in the token's precision\n     */\n    function getAdminBalance(Swap storage self, uint256 index)\n        external\n        view\n        returns (uint256)\n    {\n        require(index < self.pooledTokens.length, \"Token index out of range\");\n        return\n            self.pooledTokens[index].balanceOf(address(this)).sub(\n                self.balances[index]\n            );\n    }\n\n    /**\n     * @notice internal helper function to calculate fee per token multiplier used in\n     * swap fee calculations\n     * @param swapFee swap fee for the tokens\n     * @param numTokens number of tokens pooled\n     */\n    function _feePerToken(uint256 swapFee, uint256 numTokens)\n        internal\n        pure\n        returns (uint256)\n    {\n        return swapFee.mul(numTokens).div(numTokens.sub(1).mul(4));\n    }\n\n    /*** STATE MODIFYING FUNCTIONS ***/\n\n    /**\n     * @notice swap two tokens in the pool\n     * @param self Swap struct to read from and write to\n     * @param tokenIndexFrom the token the user wants to sell\n     * @param tokenIndexTo the token the user wants to buy\n     * @param dx the amount of tokens the user wants to sell\n     * @param minDy the min amount the user would like to receive, or revert.\n     * @return amount of token user received on swap\n     */\n    function swap(\n        Swap storage self,\n        uint8 tokenIndexFrom,\n        uint8 tokenIndexTo,\n        uint256 dx,\n        uint256 minDy\n    ) external returns (uint256) {\n        {\n            IERC20 tokenFrom = self.pooledTokens[tokenIndexFrom];\n            require(\n                dx <= tokenFrom.balanceOf(msg.sender),\n                \"Cannot swap more than you own\"\n            );\n            // Transfer tokens first to see if a fee was charged on transfer\n            uint256 beforeBalance = tokenFrom.balanceOf(address(this));\n            tokenFrom.safeTransferFrom(msg.sender, address(this), dx);\n\n            // Use the actual transferred amount for AMM math\n            dx = tokenFrom.balanceOf(address(this)).sub(beforeBalance);\n        }\n\n        uint256 dy;\n        uint256 dyFee;\n        uint256[] memory balances = self.balances;\n        (dy, dyFee) = _calculateSwap(\n            self,\n            tokenIndexFrom,\n            tokenIndexTo,\n            dx,\n            balances\n        );\n        require(dy >= minDy, \"Swap didn't result in min tokens\");\n\n        uint256 dyAdminFee = dyFee.mul(self.adminFee).div(FEE_DENOMINATOR).div(\n            self.tokenPrecisionMultipliers[tokenIndexTo]\n        );\n\n        self.balances[tokenIndexFrom] = balances[tokenIndexFrom].add(dx);\n        self.balances[tokenIndexTo] = balances[tokenIndexTo].sub(dy).sub(\n            dyAdminFee\n        );\n\n        self.pooledTokens[tokenIndexTo].safeTransfer(msg.sender, dy);\n\n        emit TokenSwap(msg.sender, dx, dy, tokenIndexFrom, tokenIndexTo);\n\n        return dy;\n    }\n\n    /**\n     * @notice Add liquidity to the pool\n     * @param self Swap struct to read from and write to\n     * @param amounts the amounts of each token to add, in their native precision\n     * @param minToMint the minimum LP tokens adding this amount of liquidity\n     * should mint, otherwise revert. Handy for front-running mitigation\n     * allowed addresses. If the pool is not in the guarded launch phase, this parameter will be ignored.\n     * @return amount of LP token user received\n     */\n    function addLiquidity(\n        Swap storage self,\n        uint256[] memory amounts,\n        uint256 minToMint\n    ) external returns (uint256) {\n        IERC20[] memory pooledTokens = self.pooledTokens;\n        require(\n            amounts.length == pooledTokens.length,\n            \"Amounts must match pooled tokens\"\n        );\n\n        // current state\n        ManageLiquidityInfo memory v = ManageLiquidityInfo(\n            0,\n            0,\n            0,\n            _getAPrecise(self),\n            self.lpToken,\n            0,\n            self.balances,\n            self.tokenPrecisionMultipliers\n        );\n        v.totalSupply = v.lpToken.totalSupply();\n\n        if (v.totalSupply != 0) {\n            v.d0 = getD(_xp(v.balances, v.multipliers), v.preciseA);\n        }\n\n        uint256[] memory newBalances = new uint256[](pooledTokens.length);\n\n        for (uint256 i = 0; i < pooledTokens.length; i++) {\n            require(\n                v.totalSupply != 0 || amounts[i] > 0,\n                \"Must supply all tokens in pool\"\n            );\n\n            // Transfer tokens first to see if a fee was charged on transfer\n            if (amounts[i] != 0) {\n                uint256 beforeBalance = pooledTokens[i].balanceOf(\n                    address(this)\n                );\n                pooledTokens[i].safeTransferFrom(\n                    msg.sender,\n                    address(this),\n                    amounts[i]\n                );\n\n                // Update the amounts[] with actual transfer amount\n                amounts[i] = pooledTokens[i].balanceOf(address(this)).sub(\n                    beforeBalance\n                );\n            }\n\n            newBalances[i] = v.balances[i].add(amounts[i]);\n        }\n\n        // invariant after change\n        v.d1 = getD(_xp(newBalances, v.multipliers), v.preciseA);\n        require(v.d1 > v.d0, \"D should increase\");\n\n        // updated to reflect fees and calculate the user's LP tokens\n        v.d2 = v.d1;\n        uint256[] memory fees = new uint256[](pooledTokens.length);\n\n        if (v.totalSupply != 0) {\n            uint256 feePerToken = _feePerToken(\n                self.swapFee,\n                pooledTokens.length\n            );\n            for (uint256 i = 0; i < pooledTokens.length; i++) {\n                uint256 idealBalance = v.d1.mul(v.balances[i]).div(v.d0);\n                fees[i] = feePerToken\n                    .mul(idealBalance.difference(newBalances[i]))\n                    .div(FEE_DENOMINATOR);\n                self.balances[i] = newBalances[i].sub(\n                    fees[i].mul(self.adminFee).div(FEE_DENOMINATOR)\n                );\n                newBalances[i] = newBalances[i].sub(fees[i]);\n            }\n            v.d2 = getD(_xp(newBalances, v.multipliers), v.preciseA);\n        } else {\n            // the initial depositor doesn't pay fees\n            self.balances = newBalances;\n        }\n\n        uint256 toMint;\n        if (v.totalSupply == 0) {\n            toMint = v.d1;\n        } else {\n            toMint = v.d2.sub(v.d0).mul(v.totalSupply).div(v.d0);\n        }\n\n        require(toMint >= minToMint, \"Couldn't mint min requested\");\n\n        // mint the user's LP tokens\n        v.lpToken.mint(msg.sender, toMint);\n\n        emit AddLiquidity(\n            msg.sender,\n            amounts,\n            fees,\n            v.d1,\n            v.totalSupply.add(toMint)\n        );\n\n        return toMint;\n    }\n\n    /**\n     * @notice Burn LP tokens to remove liquidity from the pool.\n     * @dev Liquidity can always be removed, even when the pool is paused.\n     * @param self Swap struct to read from and write to\n     * @param amount the amount of LP tokens to burn\n     * @param minAmounts the minimum amounts of each token in the pool\n     * acceptable for this burn. Useful as a front-running mitigation\n     * @return amounts of tokens the user received\n     */\n    function removeLiquidity(\n        Swap storage self,\n        uint256 amount,\n        uint256[] calldata minAmounts\n    ) external returns (uint256[] memory) {\n        LPToken lpToken = self.lpToken;\n        IERC20[] memory pooledTokens = self.pooledTokens;\n        require(amount <= lpToken.balanceOf(msg.sender), \">LP.balanceOf\");\n        require(\n            minAmounts.length == pooledTokens.length,\n            \"minAmounts must match poolTokens\"\n        );\n\n        uint256[] memory balances = self.balances;\n        uint256 totalSupply = lpToken.totalSupply();\n\n        uint256[] memory amounts = _calculateRemoveLiquidity(\n            balances,\n            amount,\n            totalSupply\n        );\n\n        for (uint256 i = 0; i < amounts.length; i++) {\n            require(amounts[i] >= minAmounts[i], \"amounts[i] < minAmounts[i]\");\n            self.balances[i] = balances[i].sub(amounts[i]);\n            pooledTokens[i].safeTransfer(msg.sender, amounts[i]);\n        }\n\n        lpToken.burnFrom(msg.sender, amount);\n\n        emit RemoveLiquidity(msg.sender, amounts, totalSupply.sub(amount));\n\n        return amounts;\n    }\n\n    /**\n     * @notice Remove liquidity from the pool all in one token.\n     * @param self Swap struct to read from and write to\n     * @param tokenAmount the amount of the lp tokens to burn\n     * @param tokenIndex the index of the token you want to receive\n     * @param minAmount the minimum amount to withdraw, otherwise revert\n     * @return amount chosen token that user received\n     */\n    function removeLiquidityOneToken(\n        Swap storage self,\n        uint256 tokenAmount,\n        uint8 tokenIndex,\n        uint256 minAmount\n    ) external returns (uint256) {\n        LPToken lpToken = self.lpToken;\n        IERC20[] memory pooledTokens = self.pooledTokens;\n\n        require(tokenAmount <= lpToken.balanceOf(msg.sender), \">LP.balanceOf\");\n        require(tokenIndex < pooledTokens.length, \"Token not found\");\n\n        uint256 totalSupply = lpToken.totalSupply();\n\n        (uint256 dy, uint256 dyFee) = _calculateWithdrawOneToken(\n            self,\n            tokenAmount,\n            tokenIndex,\n            totalSupply\n        );\n\n        require(dy >= minAmount, \"dy < minAmount\");\n\n        self.balances[tokenIndex] = self.balances[tokenIndex].sub(\n            dy.add(dyFee.mul(self.adminFee).div(FEE_DENOMINATOR))\n        );\n        lpToken.burnFrom(msg.sender, tokenAmount);\n        pooledTokens[tokenIndex].safeTransfer(msg.sender, dy);\n\n        emit RemoveLiquidityOne(\n            msg.sender,\n            tokenAmount,\n            totalSupply,\n            tokenIndex,\n            dy\n        );\n\n        return dy;\n    }\n\n    /**\n     * @notice Remove liquidity from the pool, weighted differently than the\n     * pool's current balances.\n     *\n     * @param self Swap struct to read from and write to\n     * @param amounts how much of each token to withdraw\n     * @param maxBurnAmount the max LP token provider is willing to pay to\n     * remove liquidity. Useful as a front-running mitigation.\n     * @return actual amount of LP tokens burned in the withdrawal\n     */\n    function removeLiquidityImbalance(\n        Swap storage self,\n        uint256[] memory amounts,\n        uint256 maxBurnAmount\n    ) public returns (uint256) {\n        ManageLiquidityInfo memory v = ManageLiquidityInfo(\n            0,\n            0,\n            0,\n            _getAPrecise(self),\n            self.lpToken,\n            0,\n            self.balances,\n            self.tokenPrecisionMultipliers\n        );\n        v.totalSupply = v.lpToken.totalSupply();\n\n        IERC20[] memory pooledTokens = self.pooledTokens;\n\n        require(\n            amounts.length == pooledTokens.length,\n            \"Amounts should match pool tokens\"\n        );\n\n        require(\n            maxBurnAmount <= v.lpToken.balanceOf(msg.sender) &&\n                maxBurnAmount != 0,\n            \">LP.balanceOf\"\n        );\n\n        uint256 feePerToken = _feePerToken(self.swapFee, pooledTokens.length);\n        uint256[] memory fees = new uint256[](pooledTokens.length);\n        {\n            uint256[] memory balances1 = new uint256[](pooledTokens.length);\n            v.d0 = getD(_xp(v.balances, v.multipliers), v.preciseA);\n            for (uint256 i = 0; i < pooledTokens.length; i++) {\n                balances1[i] = v.balances[i].sub(\n                    amounts[i],\n                    \"Cannot withdraw more than available\"\n                );\n            }\n            v.d1 = getD(_xp(balances1, v.multipliers), v.preciseA);\n\n            for (uint256 i = 0; i < pooledTokens.length; i++) {\n                uint256 idealBalance = v.d1.mul(v.balances[i]).div(v.d0);\n                uint256 difference = idealBalance.difference(balances1[i]);\n                fees[i] = feePerToken.mul(difference).div(FEE_DENOMINATOR);\n                self.balances[i] = balances1[i].sub(\n                    fees[i].mul(self.adminFee).div(FEE_DENOMINATOR)\n                );\n                balances1[i] = balances1[i].sub(fees[i]);\n            }\n\n            v.d2 = getD(_xp(balances1, v.multipliers), v.preciseA);\n        }\n        uint256 tokenAmount = v.d0.sub(v.d2).mul(v.totalSupply).div(v.d0);\n        require(tokenAmount != 0, \"Burnt amount cannot be zero\");\n        tokenAmount = tokenAmount.add(1);\n\n        require(tokenAmount <= maxBurnAmount, \"tokenAmount > maxBurnAmount\");\n\n        v.lpToken.burnFrom(msg.sender, tokenAmount);\n\n        for (uint256 i = 0; i < pooledTokens.length; i++) {\n            pooledTokens[i].safeTransfer(msg.sender, amounts[i]);\n        }\n\n        emit RemoveLiquidityImbalance(\n            msg.sender,\n            amounts,\n            fees,\n            v.d1,\n            v.totalSupply.sub(tokenAmount)\n        );\n\n        return tokenAmount;\n    }\n\n    /**\n     * @notice withdraw all admin fees to a given address\n     * @param self Swap struct to withdraw fees from\n     * @param to Address to send the fees to\n     */\n    function withdrawAdminFees(Swap storage self, address to) external {\n        IERC20[] memory pooledTokens = self.pooledTokens;\n        for (uint256 i = 0; i < pooledTokens.length; i++) {\n            IERC20 token = pooledTokens[i];\n            uint256 balance = token.balanceOf(address(this)).sub(\n                self.balances[i]\n            );\n            if (balance != 0) {\n                token.safeTransfer(to, balance);\n            }\n        }\n    }\n\n    /**\n     * @notice Sets the admin fee\n     * @dev adminFee cannot be higher than 100% of the swap fee\n     * @param self Swap struct to update\n     * @param newAdminFee new admin fee to be applied on future transactions\n     */\n    function setAdminFee(Swap storage self, uint256 newAdminFee) external {\n        require(newAdminFee <= MAX_ADMIN_FEE, \"Fee is too high\");\n        self.adminFee = newAdminFee;\n\n        emit NewAdminFee(newAdminFee);\n    }\n\n    /**\n     * @notice update the swap fee\n     * @dev fee cannot be higher than 1% of each swap\n     * @param self Swap struct to update\n     * @param newSwapFee new swap fee to be applied on future transactions\n     */\n    function setSwapFee(Swap storage self, uint256 newSwapFee) external {\n        require(newSwapFee <= MAX_SWAP_FEE, \"Fee is too high\");\n        self.swapFee = newSwapFee;\n\n        emit NewSwapFee(newSwapFee);\n    }\n}\n"
    },
    "@openzeppelin/contracts/token/ERC20/SafeERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\n\nimport \"./IERC20.sol\";\nimport \"../../math/SafeMath.sol\";\nimport \"../../utils/Address.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n    using SafeMath for uint256;\n    using Address for address;\n\n    function safeTransfer(IERC20 token, address to, uint256 value) internal {\n        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));\n    }\n\n    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {\n        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));\n    }\n\n    /**\n     * @dev Deprecated. This function has issues similar to the ones found in\n     * {IERC20-approve}, and its usage is discouraged.\n     *\n     * Whenever possible, use {safeIncreaseAllowance} and\n     * {safeDecreaseAllowance} instead.\n     */\n    function safeApprove(IERC20 token, address spender, uint256 value) internal {\n        // safeApprove should only be called when setting an initial allowance,\n        // or when resetting it to zero. To increase and decrease it, use\n        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'\n        // solhint-disable-next-line max-line-length\n        require((value == 0) || (token.allowance(address(this), spender) == 0),\n            \"SafeERC20: approve from non-zero to non-zero allowance\"\n        );\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));\n    }\n\n    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n        uint256 newAllowance = token.allowance(address(this), spender).add(value);\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n    }\n\n    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n        uint256 newAllowance = token.allowance(address(this), spender).sub(value, \"SafeERC20: decreased allowance below zero\");\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n    }\n\n    /**\n     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n     * on the return value: the return value is optional (but if data is returned, it must not be false).\n     * @param token The token targeted by the call.\n     * @param data The call data (encoded using abi.encode or one of its variants).\n     */\n    function _callOptionalReturn(IERC20 token, bytes memory data) private {\n        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since\n        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that\n        // the target address contains contract code and also asserts for success in the low-level call.\n\n        bytes memory returndata = address(token).functionCall(data, \"SafeERC20: low-level call failed\");\n        if (returndata.length > 0) { // Return data is optional\n            // solhint-disable-next-line max-line-length\n            require(abi.decode(returndata, (bool)), \"SafeERC20: ERC20 operation did not succeed\");\n        }\n    }\n}\n"
    },
    "contracts/MathUtils.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity 0.6.12;\n\nimport \"@openzeppelin/contracts/math/SafeMath.sol\";\n\n/**\n * @title MathUtils library\n * @notice A library to be used in conjunction with SafeMath. Contains functions for calculating\n * differences between two uint256.\n */\nlibrary MathUtils {\n    /**\n     * @notice Compares a and b and returns true if the difference between a and b\n     *         is less than 1 or equal to each other.\n     * @param a uint256 to compare with\n     * @param b uint256 to compare with\n     * @return True if the difference between a and b is less than 1 or equal,\n     *         otherwise return false\n     */\n    function within1(uint256 a, uint256 b) internal pure returns (bool) {\n        return (difference(a, b) <= 1);\n    }\n\n    /**\n     * @notice Calculates absolute difference between a and b\n     * @param a uint256 to compare with\n     * @param b uint256 to compare with\n     * @return Difference between a and b\n     */\n    function difference(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (a > b) {\n            return a - b;\n        }\n        return b - a;\n    }\n}\n"
    },
    "contracts/LPToken.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity 0.6.12;\n\nimport \"@openzeppelin/contracts-upgradeable/token/ERC20/ERC20BurnableUpgradeable.sol\";\nimport \"@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol\";\nimport \"./interfaces/ISwap.sol\";\n\n/**\n * @title Liquidity Provider Token\n * @notice This token is an ERC20 detailed token with added capability to be minted by the owner.\n * It is used to represent user's shares when providing liquidity to swap contracts.\n * @dev Only Swap contracts should initialize and own LPToken contracts.\n */\ncontract LPToken is ERC20BurnableUpgradeable, OwnableUpgradeable {\n    using SafeMathUpgradeable for uint256;\n\n    /**\n     * @notice Initializes this LPToken contract with the given name and symbol\n     * @dev The caller of this function will become the owner. A Swap contract should call this\n     * in its initializer function.\n     * @param name name of this token\n     * @param symbol symbol of this token\n     */\n    function initialize(string memory name, string memory symbol)\n        external\n        initializer\n        returns (bool)\n    {\n        __Context_init_unchained();\n        __ERC20_init_unchained(name, symbol);\n        __Ownable_init_unchained();\n        return true;\n    }\n\n    /**\n     * @notice Mints the given amount of LPToken to the recipient.\n     * @dev only owner can call this mint function\n     * @param recipient address of account to receive the tokens\n     * @param amount amount of tokens to mint\n     */\n    function mint(address recipient, uint256 amount) external onlyOwner {\n        require(amount != 0, \"LPToken: cannot mint 0\");\n        _mint(recipient, amount);\n    }\n\n    /**\n     * @dev Overrides ERC20._beforeTokenTransfer() which get called on every transfers including\n     * minting and burning. This ensures that Swap.updateUserWithdrawFees are called everytime.\n     * This assumes the owner is set to a Swap contract's address.\n     */\n    function _beforeTokenTransfer(\n        address from,\n        address to,\n        uint256 amount\n    ) internal virtual override(ERC20Upgradeable) {\n        super._beforeTokenTransfer(from, to, amount);\n        require(to != address(this), \"LPToken: cannot send to itself\");\n    }\n}\n"
    },
    "@openzeppelin/contracts/math/SafeMath.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\n\n/**\n * @dev Wrappers over Solidity's arithmetic operations with added overflow\n * checks.\n *\n * Arithmetic operations in Solidity wrap on overflow. This can easily result\n * in bugs, because programmers usually assume that an overflow raises an\n * error, which is the standard behavior in high level programming languages.\n * `SafeMath` restores this intuition by reverting the transaction when an\n * operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it's recommended to use it always.\n */\nlibrary SafeMath {\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        uint256 c = a + b;\n        if (c < a) return (false, 0);\n        return (true, c);\n    }\n\n    /**\n     * @dev Returns the substraction of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        if (b > a) return (false, 0);\n        return (true, a - b);\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n        // benefit is lost if 'b' is also tested.\n        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n        if (a == 0) return (true, 0);\n        uint256 c = a * b;\n        if (c / a != b) return (false, 0);\n        return (true, c);\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        if (b == 0) return (false, 0);\n        return (true, a / b);\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        if (b == 0) return (false, 0);\n        return (true, a % b);\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, reverting on\n     * overflow.\n     *\n     * Counterpart to Solidity's `+` operator.\n     *\n     * Requirements:\n     *\n     * - Addition cannot overflow.\n     */\n    function add(uint256 a, uint256 b) internal pure returns (uint256) {\n        uint256 c = a + b;\n        require(c >= a, \"SafeMath: addition overflow\");\n        return c;\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, reverting on\n     * overflow (when the result is negative).\n     *\n     * Counterpart to Solidity's `-` operator.\n     *\n     * Requirements:\n     *\n     * - Subtraction cannot overflow.\n     */\n    function sub(uint256 a, uint256 b) internal pure returns (uint256) {\n        require(b <= a, \"SafeMath: subtraction overflow\");\n        return a - b;\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, reverting on\n     * overflow.\n     *\n     * Counterpart to Solidity's `*` operator.\n     *\n     * Requirements:\n     *\n     * - Multiplication cannot overflow.\n     */\n    function mul(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (a == 0) return 0;\n        uint256 c = a * b;\n        require(c / a == b, \"SafeMath: multiplication overflow\");\n        return c;\n    }\n\n    /**\n     * @dev Returns the integer division of two unsigned integers, reverting on\n     * division by zero. The result is rounded towards zero.\n     *\n     * Counterpart to Solidity's `/` operator. Note: this function uses a\n     * `revert` opcode (which leaves remaining gas untouched) while Solidity\n     * uses an invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function div(uint256 a, uint256 b) internal pure returns (uint256) {\n        require(b > 0, \"SafeMath: division by zero\");\n        return a / b;\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),\n     * reverting when dividing by zero.\n     *\n     * Counterpart to Solidity's `%` operator. This function uses a `revert`\n     * opcode (which leaves remaining gas untouched) while Solidity uses an\n     * invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function mod(uint256 a, uint256 b) internal pure returns (uint256) {\n        require(b > 0, \"SafeMath: modulo by zero\");\n        return a % b;\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on\n     * overflow (when the result is negative).\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {trySub}.\n     *\n     * Counterpart to Solidity's `-` operator.\n     *\n     * Requirements:\n     *\n     * - Subtraction cannot overflow.\n     */\n    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        require(b <= a, errorMessage);\n        return a - b;\n    }\n\n    /**\n     * @dev Returns the integer division of two unsigned integers, reverting with custom message on\n     * division by zero. The result is rounded towards zero.\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {tryDiv}.\n     *\n     * Counterpart to Solidity's `/` operator. Note: this function uses a\n     * `revert` opcode (which leaves remaining gas untouched) while Solidity\n     * uses an invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        require(b > 0, errorMessage);\n        return a / b;\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),\n     * reverting with custom message when dividing by zero.\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {tryMod}.\n     *\n     * Counterpart to Solidity's `%` operator. This function uses a `revert`\n     * opcode (which leaves remaining gas untouched) while Solidity uses an\n     * invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        require(b > 0, errorMessage);\n        return a % b;\n    }\n}\n"
    },
    "contracts/interfaces/ISwap.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity 0.6.12;\n\nimport \"@openzeppelin/contracts/token/ERC20/ERC20.sol\";\nimport \"./IAllowlist.sol\";\n\ninterface ISwap {\n    // pool data view functions\n    function getA() external view returns (uint256);\n\n    function getAPrecise() external view returns (uint256);\n\n    function getAllowlist() external view returns (IAllowlist);\n\n    function getToken(uint8 index) external view returns (IERC20);\n\n    function getTokenIndex(address tokenAddress) external view returns (uint8);\n\n    function getTokenBalance(uint8 index) external view returns (uint256);\n\n    function getVirtualPrice() external view returns (uint256);\n\n    function owner() external view returns (address);\n\n    function isGuarded() external view returns (bool);\n\n    function paused() external view returns (bool);\n\n    function swapStorage()\n        external\n        view\n        returns (\n            uint256,\n            uint256,\n            uint256,\n            uint256,\n            uint256,\n            uint256,\n            address\n        );\n\n    // min return calculation functions\n    function calculateSwap(\n        uint8 tokenIndexFrom,\n        uint8 tokenIndexTo,\n        uint256 dx\n    ) external view returns (uint256);\n\n    function calculateTokenAmount(uint256[] calldata amounts, bool deposit)\n        external\n        view\n        returns (uint256);\n\n    function calculateRemoveLiquidity(uint256 amount)\n        external\n        view\n        returns (uint256[] memory);\n\n    function calculateRemoveLiquidityOneToken(\n        uint256 tokenAmount,\n        uint8 tokenIndex\n    ) external view returns (uint256 availableTokenAmount);\n\n    // state modifying functions\n    function initialize(\n        IERC20[] memory pooledTokens,\n        uint8[] memory decimals,\n        string memory lpTokenName,\n        string memory lpTokenSymbol,\n        uint256 a,\n        uint256 fee,\n        uint256 adminFee,\n        address lpTokenTargetAddress\n    ) external;\n\n    function swap(\n        uint8 tokenIndexFrom,\n        uint8 tokenIndexTo,\n        uint256 dx,\n        uint256 minDy,\n        uint256 deadline\n    ) external returns (uint256);\n\n    function addLiquidity(\n        uint256[] calldata amounts,\n        uint256 minToMint,\n        uint256 deadline\n    ) external returns (uint256);\n\n    function removeLiquidity(\n        uint256 amount,\n        uint256[] calldata minAmounts,\n        uint256 deadline\n    ) external returns (uint256[] memory);\n\n    function removeLiquidityOneToken(\n        uint256 tokenAmount,\n        uint8 tokenIndex,\n        uint256 minAmount,\n        uint256 deadline\n    ) external returns (uint256);\n\n    function removeLiquidityImbalance(\n        uint256[] calldata amounts,\n        uint256 maxBurnAmount,\n        uint256 deadline\n    ) external returns (uint256);\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20BurnableUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\n\nimport \"../../utils/ContextUpgradeable.sol\";\nimport \"./ERC20Upgradeable.sol\";\nimport \"../../proxy/Initializable.sol\";\n\n/**\n * @dev Extension of {ERC20} that allows token holders to destroy both their own\n * tokens and those that they have an allowance for, in a way that can be\n * recognized off-chain (via event analysis).\n */\nabstract contract ERC20BurnableUpgradeable is Initializable, ContextUpgradeable, ERC20Upgradeable {\n    function __ERC20Burnable_init() internal initializer {\n        __Context_init_unchained();\n        __ERC20Burnable_init_unchained();\n    }\n\n    function __ERC20Burnable_init_unchained() internal initializer {\n    }\n    using SafeMathUpgradeable for uint256;\n\n    /**\n     * @dev Destroys `amount` tokens from the caller.\n     *\n     * See {ERC20-_burn}.\n     */\n    function burn(uint256 amount) public virtual {\n        _burn(_msgSender(), amount);\n    }\n\n    /**\n     * @dev Destroys `amount` tokens from `account`, deducting from the caller's\n     * allowance.\n     *\n     * See {ERC20-_burn} and {ERC20-allowance}.\n     *\n     * Requirements:\n     *\n     * - the caller must have allowance for ``accounts``'s tokens of at least\n     * `amount`.\n     */\n    function burnFrom(address account, uint256 amount) public virtual {\n        uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, \"ERC20: burn amount exceeds allowance\");\n\n        _approve(account, _msgSender(), decreasedAllowance);\n        _burn(account, amount);\n    }\n    uint256[50] private __gap;\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\n\nimport \"../utils/ContextUpgradeable.sol\";\nimport \"../proxy/Initializable.sol\";\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {\n    address private _owner;\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the deployer as the initial owner.\n     */\n    function __Ownable_init() internal initializer {\n        __Context_init_unchained();\n        __Ownable_init_unchained();\n    }\n\n    function __Ownable_init_unchained() internal initializer {\n        address msgSender = _msgSender();\n        _owner = msgSender;\n        emit OwnershipTransferred(address(0), msgSender);\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n        _;\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions anymore. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby removing any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        emit OwnershipTransferred(_owner, address(0));\n        _owner = address(0);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n        emit OwnershipTransferred(_owner, newOwner);\n        _owner = newOwner;\n    }\n    uint256[49] private __gap;\n}\n"
    },
    "contracts/interfaces/IAllowlist.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity 0.6.12;\n\ninterface IAllowlist {\n    function getPoolAccountLimit(address poolAddress)\n        external\n        view\n        returns (uint256);\n\n    function getPoolCap(address poolAddress) external view returns (uint256);\n\n    function verifyAddress(address account, bytes32[] calldata merkleProof)\n        external\n        returns (bool);\n}\n"
    },
    "@openzeppelin/contracts/token/ERC20/ERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\n\nimport \"../../utils/Context.sol\";\nimport \"./IERC20.sol\";\nimport \"../../math/SafeMath.sol\";\n\n/**\n * @dev Implementation of the {IERC20} interface.\n *\n * This implementation is agnostic to the way tokens are created. This means\n * that a supply mechanism has to be added in a derived contract using {_mint}.\n * For a generic mechanism see {ERC20PresetMinterPauser}.\n *\n * TIP: For a detailed writeup see our guide\n * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How\n * to implement supply mechanisms].\n *\n * We have followed general OpenZeppelin guidelines: functions revert instead\n * of returning `false` on failure. This behavior is nonetheless conventional\n * and does not conflict with the expectations of ERC20 applications.\n *\n * Additionally, an {Approval} event is emitted on calls to {transferFrom}.\n * This allows applications to reconstruct the allowance for all accounts just\n * by listening to said events. Other implementations of the EIP may not emit\n * these events, as it isn't required by the specification.\n *\n * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}\n * functions have been added to mitigate the well-known issues around setting\n * allowances. See {IERC20-approve}.\n */\ncontract ERC20 is Context, IERC20 {\n    using SafeMath for uint256;\n\n    mapping (address => uint256) private _balances;\n\n    mapping (address => mapping (address => uint256)) private _allowances;\n\n    uint256 private _totalSupply;\n\n    string private _name;\n    string private _symbol;\n    uint8 private _decimals;\n\n    /**\n     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with\n     * a default value of 18.\n     *\n     * To select a different value for {decimals}, use {_setupDecimals}.\n     *\n     * All three of these values are immutable: they can only be set once during\n     * construction.\n     */\n    constructor (string memory name_, string memory symbol_) public {\n        _name = name_;\n        _symbol = symbol_;\n        _decimals = 18;\n    }\n\n    /**\n     * @dev Returns the name of the token.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev Returns the symbol of the token, usually a shorter version of the\n     * name.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev Returns the number of decimals used to get its user representation.\n     * For example, if `decimals` equals `2`, a balance of `505` tokens should\n     * be displayed to a user as `5,05` (`505 / 10 ** 2`).\n     *\n     * Tokens usually opt for a value of 18, imitating the relationship between\n     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is\n     * called.\n     *\n     * NOTE: This information is only used for _display_ purposes: it in\n     * no way affects any of the arithmetic of the contract, including\n     * {IERC20-balanceOf} and {IERC20-transfer}.\n     */\n    function decimals() public view virtual returns (uint8) {\n        return _decimals;\n    }\n\n    /**\n     * @dev See {IERC20-totalSupply}.\n     */\n    function totalSupply() public view virtual override returns (uint256) {\n        return _totalSupply;\n    }\n\n    /**\n     * @dev See {IERC20-balanceOf}.\n     */\n    function balanceOf(address account) public view virtual override returns (uint256) {\n        return _balances[account];\n    }\n\n    /**\n     * @dev See {IERC20-transfer}.\n     *\n     * Requirements:\n     *\n     * - `recipient` cannot be the zero address.\n     * - the caller must have a balance of at least `amount`.\n     */\n    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {\n        _transfer(_msgSender(), recipient, amount);\n        return true;\n    }\n\n    /**\n     * @dev See {IERC20-allowance}.\n     */\n    function allowance(address owner, address spender) public view virtual override returns (uint256) {\n        return _allowances[owner][spender];\n    }\n\n    /**\n     * @dev See {IERC20-approve}.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     */\n    function approve(address spender, uint256 amount) public virtual override returns (bool) {\n        _approve(_msgSender(), spender, amount);\n        return true;\n    }\n\n    /**\n     * @dev See {IERC20-transferFrom}.\n     *\n     * Emits an {Approval} event indicating the updated allowance. This is not\n     * required by the EIP. See the note at the beginning of {ERC20}.\n     *\n     * Requirements:\n     *\n     * - `sender` and `recipient` cannot be the zero address.\n     * - `sender` must have a balance of at least `amount`.\n     * - the caller must have allowance for ``sender``'s tokens of at least\n     * `amount`.\n     */\n    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {\n        _transfer(sender, recipient, amount);\n        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, \"ERC20: transfer amount exceeds allowance\"));\n        return true;\n    }\n\n    /**\n     * @dev Atomically increases the allowance granted to `spender` by the caller.\n     *\n     * This is an alternative to {approve} that can be used as a mitigation for\n     * problems described in {IERC20-approve}.\n     *\n     * Emits an {Approval} event indicating the updated allowance.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     */\n    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {\n        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));\n        return true;\n    }\n\n    /**\n     * @dev Atomically decreases the allowance granted to `spender` by the caller.\n     *\n     * This is an alternative to {approve} that can be used as a mitigation for\n     * problems described in {IERC20-approve}.\n     *\n     * Emits an {Approval} event indicating the updated allowance.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     * - `spender` must have allowance for the caller of at least\n     * `subtractedValue`.\n     */\n    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {\n        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, \"ERC20: decreased allowance below zero\"));\n        return true;\n    }\n\n    /**\n     * @dev Moves tokens `amount` from `sender` to `recipient`.\n     *\n     * This is internal function is equivalent to {transfer}, and can be used to\n     * e.g. implement automatic token fees, slashing mechanisms, etc.\n     *\n     * Emits a {Transfer} event.\n     *\n     * Requirements:\n     *\n     * - `sender` cannot be the zero address.\n     * - `recipient` cannot be the zero address.\n     * - `sender` must have a balance of at least `amount`.\n     */\n    function _transfer(address sender, address recipient, uint256 amount) internal virtual {\n        require(sender != address(0), \"ERC20: transfer from the zero address\");\n        require(recipient != address(0), \"ERC20: transfer to the zero address\");\n\n        _beforeTokenTransfer(sender, recipient, amount);\n\n        _balances[sender] = _balances[sender].sub(amount, \"ERC20: transfer amount exceeds balance\");\n        _balances[recipient] = _balances[recipient].add(amount);\n        emit Transfer(sender, recipient, amount);\n    }\n\n    /** @dev Creates `amount` tokens and assigns them to `account`, increasing\n     * the total supply.\n     *\n     * Emits a {Transfer} event with `from` set to the zero address.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     */\n    function _mint(address account, uint256 amount) internal virtual {\n        require(account != address(0), \"ERC20: mint to the zero address\");\n\n        _beforeTokenTransfer(address(0), account, amount);\n\n        _totalSupply = _totalSupply.add(amount);\n        _balances[account] = _balances[account].add(amount);\n        emit Transfer(address(0), account, amount);\n    }\n\n    /**\n     * @dev Destroys `amount` tokens from `account`, reducing the\n     * total supply.\n     *\n     * Emits a {Transfer} event with `to` set to the zero address.\n     *\n     * Requirements:\n     *\n     * - `account` cannot be the zero address.\n     * - `account` must have at least `amount` tokens.\n     */\n    function _burn(address account, uint256 amount) internal virtual {\n        require(account != address(0), \"ERC20: burn from the zero address\");\n\n        _beforeTokenTransfer(account, address(0), amount);\n\n        _balances[account] = _balances[account].sub(amount, \"ERC20: burn amount exceeds balance\");\n        _totalSupply = _totalSupply.sub(amount);\n        emit Transfer(account, address(0), amount);\n    }\n\n    /**\n     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.\n     *\n     * This internal function is equivalent to `approve`, and can be used to\n     * e.g. set automatic allowances for certain subsystems, etc.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `owner` cannot be the zero address.\n     * - `spender` cannot be the zero address.\n     */\n    function _approve(address owner, address spender, uint256 amount) internal virtual {\n        require(owner != address(0), \"ERC20: approve from the zero address\");\n        require(spender != address(0), \"ERC20: approve to the zero address\");\n\n        _allowances[owner][spender] = amount;\n        emit Approval(owner, spender, amount);\n    }\n\n    /**\n     * @dev Sets {decimals} to a value other than the default one of 18.\n     *\n     * WARNING: This function should only be called from the constructor. Most\n     * applications that interact with token contracts will not expect\n     * {decimals} to ever change, and may work incorrectly if it does.\n     */\n    function _setupDecimals(uint8 decimals_) internal virtual {\n        _decimals = decimals_;\n    }\n\n    /**\n     * @dev Hook that is called before any transfer of tokens. This includes\n     * minting and burning.\n     *\n     * Calling conditions:\n     *\n     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens\n     * will be to transferred to `to`.\n     * - when `from` is zero, `amount` tokens will be minted for `to`.\n     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.\n     * - `from` and `to` are never both zero.\n     *\n     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].\n     */\n    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }\n}\n"
    },
    "@openzeppelin/contracts/utils/Context.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\n\n/*\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with GSN meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address payable) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes memory) {\n        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691\n        return msg.data;\n    }\n}\n"
    },
    "@openzeppelin/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20 {\n    /**\n     * @dev Returns the amount of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the amount of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves `amount` tokens from the caller's account to `recipient`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address recipient, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender's allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Moves `amount` tokens from `sender` to `recipient` using the\n     * allowance mechanism. `amount` is then deducted from the caller's\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/proxy/Initializable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\n// solhint-disable-next-line compiler-version\npragma solidity >=0.4.24 <0.8.0;\n\nimport \"../utils/AddressUpgradeable.sol\";\n\n/**\n * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed\n * behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {UpgradeableProxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n */\nabstract contract Initializable {\n\n    /**\n     * @dev Indicates that the contract has been initialized.\n     */\n    bool private _initialized;\n\n    /**\n     * @dev Indicates that the contract is in the process of being initialized.\n     */\n    bool private _initializing;\n\n    /**\n     * @dev Modifier to protect an initializer function from being invoked twice.\n     */\n    modifier initializer() {\n        require(_initializing || _isConstructor() || !_initialized, \"Initializable: contract is already initialized\");\n\n        bool isTopLevelCall = !_initializing;\n        if (isTopLevelCall) {\n            _initializing = true;\n            _initialized = true;\n        }\n\n        _;\n\n        if (isTopLevelCall) {\n            _initializing = false;\n        }\n    }\n\n    /// @dev Returns true if and only if the function is running in the constructor\n    function _isConstructor() private view returns (bool) {\n        return !AddressUpgradeable.isContract(address(this));\n    }\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\nimport \"../proxy/Initializable.sol\";\n\n/*\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with GSN meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract ContextUpgradeable is Initializable {\n    function __Context_init() internal initializer {\n        __Context_init_unchained();\n    }\n\n    function __Context_init_unchained() internal initializer {\n    }\n    function _msgSender() internal view virtual returns (address payable) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes memory) {\n        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691\n        return msg.data;\n    }\n    uint256[50] private __gap;\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\n\nimport \"../../utils/ContextUpgradeable.sol\";\nimport \"./IERC20Upgradeable.sol\";\nimport \"../../math/SafeMathUpgradeable.sol\";\nimport \"../../proxy/Initializable.sol\";\n\n/**\n * @dev Implementation of the {IERC20} interface.\n *\n * This implementation is agnostic to the way tokens are created. This means\n * that a supply mechanism has to be added in a derived contract using {_mint}.\n * For a generic mechanism see {ERC20PresetMinterPauser}.\n *\n * TIP: For a detailed writeup see our guide\n * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How\n * to implement supply mechanisms].\n *\n * We have followed general OpenZeppelin guidelines: functions revert instead\n * of returning `false` on failure. This behavior is nonetheless conventional\n * and does not conflict with the expectations of ERC20 applications.\n *\n * Additionally, an {Approval} event is emitted on calls to {transferFrom}.\n * This allows applications to reconstruct the allowance for all accounts just\n * by listening to said events. Other implementations of the EIP may not emit\n * these events, as it isn't required by the specification.\n *\n * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}\n * functions have been added to mitigate the well-known issues around setting\n * allowances. See {IERC20-approve}.\n */\ncontract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable {\n    using SafeMathUpgradeable for uint256;\n\n    mapping (address => uint256) private _balances;\n\n    mapping (address => mapping (address => uint256)) private _allowances;\n\n    uint256 private _totalSupply;\n\n    string private _name;\n    string private _symbol;\n    uint8 private _decimals;\n\n    /**\n     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with\n     * a default value of 18.\n     *\n     * To select a different value for {decimals}, use {_setupDecimals}.\n     *\n     * All three of these values are immutable: they can only be set once during\n     * construction.\n     */\n    function __ERC20_init(string memory name_, string memory symbol_) internal initializer {\n        __Context_init_unchained();\n        __ERC20_init_unchained(name_, symbol_);\n    }\n\n    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal initializer {\n        _name = name_;\n        _symbol = symbol_;\n        _decimals = 18;\n    }\n\n    /**\n     * @dev Returns the name of the token.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev Returns the symbol of the token, usually a shorter version of the\n     * name.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev Returns the number of decimals used to get its user representation.\n     * For example, if `decimals` equals `2`, a balance of `505` tokens should\n     * be displayed to a user as `5,05` (`505 / 10 ** 2`).\n     *\n     * Tokens usually opt for a value of 18, imitating the relationship between\n     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is\n     * called.\n     *\n     * NOTE: This information is only used for _display_ purposes: it in\n     * no way affects any of the arithmetic of the contract, including\n     * {IERC20-balanceOf} and {IERC20-transfer}.\n     */\n    function decimals() public view virtual returns (uint8) {\n        return _decimals;\n    }\n\n    /**\n     * @dev See {IERC20-totalSupply}.\n     */\n    function totalSupply() public view virtual override returns (uint256) {\n        return _totalSupply;\n    }\n\n    /**\n     * @dev See {IERC20-balanceOf}.\n     */\n    function balanceOf(address account) public view virtual override returns (uint256) {\n        return _balances[account];\n    }\n\n    /**\n     * @dev See {IERC20-transfer}.\n     *\n     * Requirements:\n     *\n     * - `recipient` cannot be the zero address.\n     * - the caller must have a balance of at least `amount`.\n     */\n    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {\n        _transfer(_msgSender(), recipient, amount);\n        return true;\n    }\n\n    /**\n     * @dev See {IERC20-allowance}.\n     */\n    function allowance(address owner, address spender) public view virtual override returns (uint256) {\n        return _allowances[owner][spender];\n    }\n\n    /**\n     * @dev See {IERC20-approve}.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     */\n    function approve(address spender, uint256 amount) public virtual override returns (bool) {\n        _approve(_msgSender(), spender, amount);\n        return true;\n    }\n\n    /**\n     * @dev See {IERC20-transferFrom}.\n     *\n     * Emits an {Approval} event indicating the updated allowance. This is not\n     * required by the EIP. See the note at the beginning of {ERC20}.\n     *\n     * Requirements:\n     *\n     * - `sender` and `recipient` cannot be the zero address.\n     * - `sender` must have a balance of at least `amount`.\n     * - the caller must have allowance for ``sender``'s tokens of at least\n     * `amount`.\n     */\n    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {\n        _transfer(sender, recipient, amount);\n        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, \"ERC20: transfer amount exceeds allowance\"));\n        return true;\n    }\n\n    /**\n     * @dev Atomically increases the allowance granted to `spender` by the caller.\n     *\n     * This is an alternative to {approve} that can be used as a mitigation for\n     * problems described in {IERC20-approve}.\n     *\n     * Emits an {Approval} event indicating the updated allowance.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     */\n    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {\n        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));\n        return true;\n    }\n\n    /**\n     * @dev Atomically decreases the allowance granted to `spender` by the caller.\n     *\n     * This is an alternative to {approve} that can be used as a mitigation for\n     * problems described in {IERC20-approve}.\n     *\n     * Emits an {Approval} event indicating the updated allowance.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     * - `spender` must have allowance for the caller of at least\n     * `subtractedValue`.\n     */\n    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {\n        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, \"ERC20: decreased allowance below zero\"));\n        return true;\n    }\n\n    /**\n     * @dev Moves tokens `amount` from `sender` to `recipient`.\n     *\n     * This is internal function is equivalent to {transfer}, and can be used to\n     * e.g. implement automatic token fees, slashing mechanisms, etc.\n     *\n     * Emits a {Transfer} event.\n     *\n     * Requirements:\n     *\n     * - `sender` cannot be the zero address.\n     * - `recipient` cannot be the zero address.\n     * - `sender` must have a balance of at least `amount`.\n     */\n    function _transfer(address sender, address recipient, uint256 amount) internal virtual {\n        require(sender != address(0), \"ERC20: transfer from the zero address\");\n        require(recipient != address(0), \"ERC20: transfer to the zero address\");\n\n        _beforeTokenTransfer(sender, recipient, amount);\n\n        _balances[sender] = _balances[sender].sub(amount, \"ERC20: transfer amount exceeds balance\");\n        _balances[recipient] = _balances[recipient].add(amount);\n        emit Transfer(sender, recipient, amount);\n    }\n\n    /** @dev Creates `amount` tokens and assigns them to `account`, increasing\n     * the total supply.\n     *\n     * Emits a {Transfer} event with `from` set to the zero address.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     */\n    function _mint(address account, uint256 amount) internal virtual {\n        require(account != address(0), \"ERC20: mint to the zero address\");\n\n        _beforeTokenTransfer(address(0), account, amount);\n\n        _totalSupply = _totalSupply.add(amount);\n        _balances[account] = _balances[account].add(amount);\n        emit Transfer(address(0), account, amount);\n    }\n\n    /**\n     * @dev Destroys `amount` tokens from `account`, reducing the\n     * total supply.\n     *\n     * Emits a {Transfer} event with `to` set to the zero address.\n     *\n     * Requirements:\n     *\n     * - `account` cannot be the zero address.\n     * - `account` must have at least `amount` tokens.\n     */\n    function _burn(address account, uint256 amount) internal virtual {\n        require(account != address(0), \"ERC20: burn from the zero address\");\n\n        _beforeTokenTransfer(account, address(0), amount);\n\n        _balances[account] = _balances[account].sub(amount, \"ERC20: burn amount exceeds balance\");\n        _totalSupply = _totalSupply.sub(amount);\n        emit Transfer(account, address(0), amount);\n    }\n\n    /**\n     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.\n     *\n     * This internal function is equivalent to `approve`, and can be used to\n     * e.g. set automatic allowances for certain subsystems, etc.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `owner` cannot be the zero address.\n     * - `spender` cannot be the zero address.\n     */\n    function _approve(address owner, address spender, uint256 amount) internal virtual {\n        require(owner != address(0), \"ERC20: approve from the zero address\");\n        require(spender != address(0), \"ERC20: approve to the zero address\");\n\n        _allowances[owner][spender] = amount;\n        emit Approval(owner, spender, amount);\n    }\n\n    /**\n     * @dev Sets {decimals} to a value other than the default one of 18.\n     *\n     * WARNING: This function should only be called from the constructor. Most\n     * applications that interact with token contracts will not expect\n     * {decimals} to ever change, and may work incorrectly if it does.\n     */\n    function _setupDecimals(uint8 decimals_) internal virtual {\n        _decimals = decimals_;\n    }\n\n    /**\n     * @dev Hook that is called before any transfer of tokens. This includes\n     * minting and burning.\n     *\n     * Calling conditions:\n     *\n     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens\n     * will be to transferred to `to`.\n     * - when `from` is zero, `amount` tokens will be minted for `to`.\n     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.\n     * - `from` and `to` are never both zero.\n     *\n     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].\n     */\n    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }\n    uint256[44] private __gap;\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.2 <0.8.0;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary AddressUpgradeable {\n    /**\n     * @dev Returns true if `account` is a contract.\n     *\n     * [IMPORTANT]\n     * ====\n     * It is unsafe to assume that an address for which this function returns\n     * false is an externally-owned account (EOA) and not a contract.\n     *\n     * Among others, `isContract` will return false for the following\n     * types of addresses:\n     *\n     *  - an externally-owned account\n     *  - a contract in construction\n     *  - an address where a contract will be created\n     *  - an address where a contract lived, but was destroyed\n     * ====\n     */\n    function isContract(address account) internal view returns (bool) {\n        // This method relies on extcodesize, which returns 0 for contracts in\n        // construction, since the code is only stored at the end of the\n        // constructor execution.\n\n        uint256 size;\n        // solhint-disable-next-line no-inline-assembly\n        assembly { size := extcodesize(account) }\n        return size > 0;\n    }\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value\n        (bool success, ) = recipient.call{ value: amount }(\"\");\n        require(success, \"Address: unable to send value, recipient may have reverted\");\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain`call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason, it is bubbled up by this\n     * function (like regular Solidity function calls).\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n      return functionCall(target, data, \"Address: low-level call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n     * `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n     * with `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {\n        require(address(this).balance >= value, \"Address: insufficient balance for call\");\n        require(isContract(target), \"Address: call to non-contract\");\n\n        // solhint-disable-next-line avoid-low-level-calls\n        (bool success, bytes memory returndata) = target.call{ value: value }(data);\n        return _verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        return functionStaticCall(target, data, \"Address: low-level static call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {\n        require(isContract(target), \"Address: static call to non-contract\");\n\n        // solhint-disable-next-line avoid-low-level-calls\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return _verifyCallResult(success, returndata, errorMessage);\n    }\n\n    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {\n        if (success) {\n            return returndata;\n        } else {\n            // Look for revert reason and bubble it up if present\n            if (returndata.length > 0) {\n                // The easiest way to bubble the revert reason is using memory via assembly\n\n                // solhint-disable-next-line no-inline-assembly\n                assembly {\n                    let returndata_size := mload(returndata)\n                    revert(add(32, returndata), returndata_size)\n                }\n            } else {\n                revert(errorMessage);\n            }\n        }\n    }\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/math/SafeMathUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\n\n/**\n * @dev Wrappers over Solidity's arithmetic operations with added overflow\n * checks.\n *\n * Arithmetic operations in Solidity wrap on overflow. This can easily result\n * in bugs, because programmers usually assume that an overflow raises an\n * error, which is the standard behavior in high level programming languages.\n * `SafeMath` restores this intuition by reverting the transaction when an\n * operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it's recommended to use it always.\n */\nlibrary SafeMathUpgradeable {\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        uint256 c = a + b;\n        if (c < a) return (false, 0);\n        return (true, c);\n    }\n\n    /**\n     * @dev Returns the substraction of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        if (b > a) return (false, 0);\n        return (true, a - b);\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n        // benefit is lost if 'b' is also tested.\n        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n        if (a == 0) return (true, 0);\n        uint256 c = a * b;\n        if (c / a != b) return (false, 0);\n        return (true, c);\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        if (b == 0) return (false, 0);\n        return (true, a / b);\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        if (b == 0) return (false, 0);\n        return (true, a % b);\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, reverting on\n     * overflow.\n     *\n     * Counterpart to Solidity's `+` operator.\n     *\n     * Requirements:\n     *\n     * - Addition cannot overflow.\n     */\n    function add(uint256 a, uint256 b) internal pure returns (uint256) {\n        uint256 c = a + b;\n        require(c >= a, \"SafeMath: addition overflow\");\n        return c;\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, reverting on\n     * overflow (when the result is negative).\n     *\n     * Counterpart to Solidity's `-` operator.\n     *\n     * Requirements:\n     *\n     * - Subtraction cannot overflow.\n     */\n    function sub(uint256 a, uint256 b) internal pure returns (uint256) {\n        require(b <= a, \"SafeMath: subtraction overflow\");\n        return a - b;\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, reverting on\n     * overflow.\n     *\n     * Counterpart to Solidity's `*` operator.\n     *\n     * Requirements:\n     *\n     * - Multiplication cannot overflow.\n     */\n    function mul(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (a == 0) return 0;\n        uint256 c = a * b;\n        require(c / a == b, \"SafeMath: multiplication overflow\");\n        return c;\n    }\n\n    /**\n     * @dev Returns the integer division of two unsigned integers, reverting on\n     * division by zero. The result is rounded towards zero.\n     *\n     * Counterpart to Solidity's `/` operator. Note: this function uses a\n     * `revert` opcode (which leaves remaining gas untouched) while Solidity\n     * uses an invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function div(uint256 a, uint256 b) internal pure returns (uint256) {\n        require(b > 0, \"SafeMath: division by zero\");\n        return a / b;\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),\n     * reverting when dividing by zero.\n     *\n     * Counterpart to Solidity's `%` operator. This function uses a `revert`\n     * opcode (which leaves remaining gas untouched) while Solidity uses an\n     * invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function mod(uint256 a, uint256 b) internal pure returns (uint256) {\n        require(b > 0, \"SafeMath: modulo by zero\");\n        return a % b;\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on\n     * overflow (when the result is negative).\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {trySub}.\n     *\n     * Counterpart to Solidity's `-` operator.\n     *\n     * Requirements:\n     *\n     * - Subtraction cannot overflow.\n     */\n    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        require(b <= a, errorMessage);\n        return a - b;\n    }\n\n    /**\n     * @dev Returns the integer division of two unsigned integers, reverting with custom message on\n     * division by zero. The result is rounded towards zero.\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {tryDiv}.\n     *\n     * Counterpart to Solidity's `/` operator. Note: this function uses a\n     * `revert` opcode (which leaves remaining gas untouched) while Solidity\n     * uses an invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        require(b > 0, errorMessage);\n        return a / b;\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),\n     * reverting with custom message when dividing by zero.\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {tryMod}.\n     *\n     * Counterpart to Solidity's `%` operator. This function uses a `revert`\n     * opcode (which leaves remaining gas untouched) while Solidity uses an\n     * invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        require(b > 0, errorMessage);\n        return a % b;\n    }\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20Upgradeable {\n    /**\n     * @dev Returns the amount of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the amount of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves `amount` tokens from the caller's account to `recipient`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address recipient, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender's allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Moves `amount` tokens from `sender` to `recipient` using the\n     * allowance mechanism. `amount` is then deducted from the caller's\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n}\n"
    },
    "@openzeppelin/contracts/utils/Address.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.2 <0.8.0;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n    /**\n     * @dev Returns true if `account` is a contract.\n     *\n     * [IMPORTANT]\n     * ====\n     * It is unsafe to assume that an address for which this function returns\n     * false is an externally-owned account (EOA) and not a contract.\n     *\n     * Among others, `isContract` will return false for the following\n     * types of addresses:\n     *\n     *  - an externally-owned account\n     *  - a contract in construction\n     *  - an address where a contract will be created\n     *  - an address where a contract lived, but was destroyed\n     * ====\n     */\n    function isContract(address account) internal view returns (bool) {\n        // This method relies on extcodesize, which returns 0 for contracts in\n        // construction, since the code is only stored at the end of the\n        // constructor execution.\n\n        uint256 size;\n        // solhint-disable-next-line no-inline-assembly\n        assembly { size := extcodesize(account) }\n        return size > 0;\n    }\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value\n        (bool success, ) = recipient.call{ value: amount }(\"\");\n        require(success, \"Address: unable to send value, recipient may have reverted\");\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain`call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason, it is bubbled up by this\n     * function (like regular Solidity function calls).\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n      return functionCall(target, data, \"Address: low-level call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n     * `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n     * with `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {\n        require(address(this).balance >= value, \"Address: insufficient balance for call\");\n        require(isContract(target), \"Address: call to non-contract\");\n\n        // solhint-disable-next-line avoid-low-level-calls\n        (bool success, bytes memory returndata) = target.call{ value: value }(data);\n        return _verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        return functionStaticCall(target, data, \"Address: low-level static call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {\n        require(isContract(target), \"Address: static call to non-contract\");\n\n        // solhint-disable-next-line avoid-low-level-calls\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return _verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {\n        require(isContract(target), \"Address: delegate call to non-contract\");\n\n        // solhint-disable-next-line avoid-low-level-calls\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return _verifyCallResult(success, returndata, errorMessage);\n    }\n\n    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {\n        if (success) {\n            return returndata;\n        } else {\n            // Look for revert reason and bubble it up if present\n            if (returndata.length > 0) {\n                // The easiest way to bubble the revert reason is using memory via assembly\n\n                // solhint-disable-next-line no-inline-assembly\n                assembly {\n                    let returndata_size := mload(returndata)\n                    revert(add(32, returndata), returndata_size)\n                }\n            } else {\n                revert(errorMessage);\n            }\n        }\n    }\n}\n"
    }
  },
  "settings": {
    "optimizer": {
      "enabled": true,
      "runs": 10000
    },
    "outputSelection": {
      "*": {
        "*": [
          "evm.bytecode",
          "evm.deployedBytecode",
          "devdoc",
          "userdoc",
          "metadata",
          "abi"
        ]
      }
    },
    "metadata": {
      "useLiteralContent": true
    },
    "libraries": {}
  }
}