| { | |
| "language": "Solidity", | |
| "sources": { | |
| "contracts/swapimpls/zeroXImpl.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\npragma solidity >=0.8.0;\n\nimport \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport \"../MiddlewareImplBase.sol\";\nimport \"../helpers/errors.sol\";\n\n/**\n// @title 0X Implementation\n// @notice Called by the registry before cross chain transfers if the user requests\n// for a swap\n// @dev Follows the interface of Swap Impl Base\n// @author Movr Network\n*/\ncontract ZeroXSwapImpl is MiddlewareImplBase {\n using SafeERC20 for IERC20;\n address payable public zeroXExchangeProxy;\n event UpdateZeroXExchangeProxyAddress(address indexed zeroXExchangeProxy);\n event AmountRecieved(\n uint256 amount,\n address tokenAddress,\n address receiver\n );\n address private constant NATIVE_TOKEN_ADDRESS =\n address(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE);\n\n /// one inch aggregator contract is payable to allow ethereum swaps\n constructor(address registry, address _zeroXExchangeProxy)\n MiddlewareImplBase(registry)\n {\n zeroXExchangeProxy = payable(_zeroXExchangeProxy);\n }\n\n /// @notice Sets zeroXExchangeProxy address\n /// @param _zeroXExchangeProxy is the address for oneInchAggreagtor\n function setZeroXExchangeProxy(address _zeroXExchangeProxy)\n external\n onlyOwner\n {\n zeroXExchangeProxy = payable(_zeroXExchangeProxy);\n emit UpdateZeroXExchangeProxyAddress(zeroXExchangeProxy);\n (_zeroXExchangeProxy);\n }\n\n receive() external payable {}\n\n fallback() external payable {}\n\n /**\n // @notice Function responsible for swapping from one token to a different token\n // @dev This is called only when there is a request for a swap. \n // @param from userAddress or sending address.\n // @param fromToken token to be swapped\n // @param amount amount to be swapped \n // param to not required. This is there only to follow the MiddlewareImplBase\n // @param swapExtraData data required for zeroX Exchange to get the swap done\n */\n function performAction(\n address from,\n address fromToken,\n uint256 amount,\n address receiverAddress, // receiverAddress\n bytes memory swapExtraData\n ) external payable override onlyRegistry returns (uint256) {\n require(fromToken != address(0), MovrErrors.ADDRESS_0_PROVIDED);\n (address payable toTokenAddress, bytes memory swapCallData) = abi\n .decode(swapExtraData, (address, bytes));\n\n uint256 _initialBalanceTokenOut;\n uint256 _finalBalanceTokenOut;\n\n if (toTokenAddress != NATIVE_TOKEN_ADDRESS)\n _initialBalanceTokenOut = IERC20(toTokenAddress).balanceOf(\n address(this)\n );\n else _initialBalanceTokenOut = address(this).balance;\n\n if (fromToken != NATIVE_TOKEN_ADDRESS) {\n IERC20(fromToken).safeTransferFrom(from, address(this), amount);\n IERC20(fromToken).safeIncreaseAllowance(zeroXExchangeProxy, amount);\n\n // solhint-disable-next-line\n (bool success, ) = zeroXExchangeProxy.call(swapCallData);\n IERC20(fromToken).safeApprove(zeroXExchangeProxy, 0);\n require(success, MovrErrors.MIDDLEWARE_ACTION_FAILED);\n } else {\n (bool success, ) = zeroXExchangeProxy.call{value: amount}(\n swapCallData\n );\n require(success, MovrErrors.MIDDLEWARE_ACTION_FAILED);\n }\n if (toTokenAddress != NATIVE_TOKEN_ADDRESS)\n _finalBalanceTokenOut = IERC20(toTokenAddress).balanceOf(\n address(this)\n );\n else _finalBalanceTokenOut = address(this).balance;\n\n uint256 returnAmount = _finalBalanceTokenOut - _initialBalanceTokenOut;\n if (toTokenAddress == NATIVE_TOKEN_ADDRESS)\n payable(receiverAddress).transfer(returnAmount);\n else IERC20(toTokenAddress).transfer(receiverAddress, returnAmount);\n return returnAmount;\n }\n\n /**\n // @notice Function responsible for swapping from one token to a different token directly\n // @dev This is called only when there is a request for a swap. \n // @param fromToken token to be swapped\n // @param amount amount to be swapped \n // @param swapExtraData data required for the one inch aggregator to get the swap done\n */\n function performDirectAction(\n address fromToken,\n address toToken,\n address receiver,\n uint256 amount,\n bytes memory swapExtraData\n ) external payable {\n uint256 _initialBalanceTokenOut;\n uint256 _finalBalanceTokenOut;\n\n if (toToken != NATIVE_TOKEN_ADDRESS)\n _initialBalanceTokenOut = IERC20(toToken).balanceOf(address(this));\n else _initialBalanceTokenOut = address(this).balance;\n\n if (fromToken != NATIVE_TOKEN_ADDRESS) {\n IERC20(fromToken).safeTransferFrom(\n msg.sender,\n address(this),\n amount\n );\n IERC20(fromToken).safeIncreaseAllowance(zeroXExchangeProxy, amount);\n\n // solhint-disable-next-line\n (bool success, ) = zeroXExchangeProxy.call(swapExtraData);\n IERC20(fromToken).safeApprove(zeroXExchangeProxy, 0);\n require(success, MovrErrors.MIDDLEWARE_ACTION_FAILED);\n } else {\n (bool success, ) = zeroXExchangeProxy.call{value: amount}(\n swapExtraData\n );\n require(success, MovrErrors.MIDDLEWARE_ACTION_FAILED);\n }\n\n if (toToken != NATIVE_TOKEN_ADDRESS)\n _finalBalanceTokenOut = IERC20(toToken).balanceOf(address(this));\n else _finalBalanceTokenOut = address(this).balance;\n\n uint256 returnAmount = _finalBalanceTokenOut - _initialBalanceTokenOut;\n if (toToken == NATIVE_TOKEN_ADDRESS)\n payable(receiver).transfer(returnAmount);\n else IERC20(toToken).transfer(receiver, returnAmount);\n emit AmountRecieved(returnAmount, toToken, receiver);\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/token/ERC20/IERC20.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20 {\n /**\n * @dev Emitted when `value` tokens are moved from one account (`from`) to\n * another (`to`).\n *\n * Note that `value` may be zero.\n */\n event Transfer(address indexed from, address indexed to, uint256 value);\n\n /**\n * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n * a call to {approve}. `value` is the new allowance.\n */\n event Approval(address indexed owner, address indexed spender, uint256 value);\n\n /**\n * @dev Returns the amount of tokens in existence.\n */\n function totalSupply() external view returns (uint256);\n\n /**\n * @dev Returns the amount of tokens owned by `account`.\n */\n function balanceOf(address account) external view returns (uint256);\n\n /**\n * @dev Moves `amount` tokens from the caller's account to `to`.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transfer(address to, uint256 amount) external returns (bool);\n\n /**\n * @dev Returns the remaining number of tokens that `spender` will be\n * allowed to spend on behalf of `owner` through {transferFrom}. This is\n * zero by default.\n *\n * This value changes when {approve} or {transferFrom} are called.\n */\n function allowance(address owner, address spender) external view returns (uint256);\n\n /**\n * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * IMPORTANT: Beware that changing an allowance with this method brings the risk\n * that someone may use both the old and the new allowance by unfortunate\n * transaction ordering. One possible solution to mitigate this race\n * condition is to first reduce the spender's allowance to 0 and set the\n * desired value afterwards:\n * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n *\n * Emits an {Approval} event.\n */\n function approve(address spender, uint256 amount) external returns (bool);\n\n /**\n * @dev Moves `amount` tokens from `from` to `to` using the\n * allowance mechanism. `amount` is then deducted from the caller's\n * allowance.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(\n address from,\n address to,\n uint256 amount\n ) external returns (bool);\n}\n" | |
| }, | |
| "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../IERC20.sol\";\nimport \"../extensions/draft-IERC20Permit.sol\";\nimport \"../../../utils/Address.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n using Address for address;\n\n function safeTransfer(\n IERC20 token,\n address to,\n uint256 value\n ) internal {\n _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));\n }\n\n function safeTransferFrom(\n IERC20 token,\n address from,\n address to,\n uint256 value\n ) internal {\n _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));\n }\n\n /**\n * @dev Deprecated. This function has issues similar to the ones found in\n * {IERC20-approve}, and its usage is discouraged.\n *\n * Whenever possible, use {safeIncreaseAllowance} and\n * {safeDecreaseAllowance} instead.\n */\n function safeApprove(\n IERC20 token,\n address spender,\n uint256 value\n ) internal {\n // safeApprove should only be called when setting an initial allowance,\n // or when resetting it to zero. To increase and decrease it, use\n // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'\n require(\n (value == 0) || (token.allowance(address(this), spender) == 0),\n \"SafeERC20: approve from non-zero to non-zero allowance\"\n );\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));\n }\n\n function safeIncreaseAllowance(\n IERC20 token,\n address spender,\n uint256 value\n ) internal {\n uint256 newAllowance = token.allowance(address(this), spender) + value;\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n }\n\n function safeDecreaseAllowance(\n IERC20 token,\n address spender,\n uint256 value\n ) internal {\n unchecked {\n uint256 oldAllowance = token.allowance(address(this), spender);\n require(oldAllowance >= value, \"SafeERC20: decreased allowance below zero\");\n uint256 newAllowance = oldAllowance - value;\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n }\n }\n\n function safePermit(\n IERC20Permit token,\n address owner,\n address spender,\n uint256 value,\n uint256 deadline,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) internal {\n uint256 nonceBefore = token.nonces(owner);\n token.permit(owner, spender, value, deadline, v, r, s);\n uint256 nonceAfter = token.nonces(owner);\n require(nonceAfter == nonceBefore + 1, \"SafeERC20: permit did not succeed\");\n }\n\n /**\n * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n * on the return value: the return value is optional (but if data is returned, it must not be false).\n * @param token The token targeted by the call.\n * @param data The call data (encoded using abi.encode or one of its variants).\n */\n function _callOptionalReturn(IERC20 token, bytes memory data) private {\n // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since\n // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that\n // the target address contains contract code and also asserts for success in the low-level call.\n\n bytes memory returndata = address(token).functionCall(data, \"SafeERC20: low-level call failed\");\n if (returndata.length > 0) {\n // Return data is optional\n require(abi.decode(returndata, (bool)), \"SafeERC20: ERC20 operation did not succeed\");\n }\n }\n}\n" | |
| }, | |
| "contracts/MiddlewareImplBase.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.4;\nimport \"@openzeppelin/contracts/access/Ownable.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport \"./helpers/errors.sol\";\n\n/**\n// @title Abstract Contract for middleware services.\n// @notice All middleware services will follow this interface. \n*/\nabstract contract MiddlewareImplBase is Ownable {\n using SafeERC20 for IERC20;\n address public immutable registry;\n\n /// @notice only registry address is required.\n constructor(address _registry) Ownable() {\n registry = _registry;\n }\n\n modifier onlyRegistry() {\n require(msg.sender == registry, MovrErrors.INVALID_SENDER);\n _;\n }\n\n function performAction(\n address from,\n address fromToken,\n uint256 amount,\n address receiverAddress,\n bytes memory data\n ) external payable virtual returns (uint256);\n\n function rescueFunds(\n address token,\n address userAddress,\n uint256 amount\n ) external onlyOwner {\n IERC20(token).safeTransfer(userAddress, amount);\n }\n\n function rescueEther(address payable userAddress, uint256 amount)\n external\n onlyOwner\n {\n userAddress.transfer(amount);\n }\n}\n" | |
| }, | |
| "contracts/helpers/errors.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\npragma solidity >=0.8.0;\n\nlibrary MovrErrors {\n string internal constant ADDRESS_0_PROVIDED = \"ADDRESS_0_PROVIDED\";\n string internal constant EMPTY_INPUT = \"EMPTY_INPUT\";\n string internal constant LENGTH_MISMATCH = \"LENGTH_MISMATCH\";\n string internal constant INVALID_VALUE = \"INVALID_VALUE\";\n string internal constant INVALID_AMT = \"INVALID_AMT\";\n\n string internal constant IMPL_NOT_FOUND = \"IMPL_NOT_FOUND\";\n string internal constant ROUTE_NOT_FOUND = \"ROUTE_NOT_FOUND\";\n string internal constant IMPL_NOT_ALLOWED = \"IMPL_NOT_ALLOWED\";\n string internal constant ROUTE_NOT_ALLOWED = \"ROUTE_NOT_ALLOWED\";\n string internal constant INVALID_CHAIN_DATA = \"INVALID_CHAIN_DATA\";\n string internal constant CHAIN_NOT_SUPPORTED = \"CHAIN_NOT_SUPPORTED\";\n string internal constant TOKEN_NOT_SUPPORTED = \"TOKEN_NOT_SUPPORTED\";\n string internal constant NOT_IMPLEMENTED = \"NOT_IMPLEMENTED\";\n string internal constant INVALID_SENDER = \"INVALID_SENDER\";\n string internal constant INVALID_BRIDGE_ID = \"INVALID_BRIDGE_ID\";\n string internal constant MIDDLEWARE_ACTION_FAILED =\n \"MIDDLEWARE_ACTION_FAILED\";\n string internal constant VALUE_SHOULD_BE_ZERO = \"VALUE_SHOULD_BE_ZERO\";\n string internal constant VALUE_SHOULD_NOT_BE_ZERO =\n \"VALUE_SHOULD_NOT_BE_ZERO\";\n string internal constant VALUE_NOT_ENOUGH = \"VALUE_NOT_ENOUGH\";\n string internal constant VALUE_NOT_EQUAL_TO_AMOUNT =\n \"VALUE_NOT_EQUAL_TO_AMOUNT\";\n string internal constant UNSUPPORTED_INTERFACE_ID =\n \"UNSUPPORTED INTERFACE ID\";\n}\n" | |
| }, | |
| "@openzeppelin/contracts/token/ERC20/extensions/draft-IERC20Permit.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n */\ninterface IERC20Permit {\n /**\n * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,\n * given ``owner``'s signed approval.\n *\n * IMPORTANT: The same issues {IERC20-approve} has related to transaction\n * ordering also apply here.\n *\n * Emits an {Approval} event.\n *\n * Requirements:\n *\n * - `spender` cannot be the zero address.\n * - `deadline` must be a timestamp in the future.\n * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`\n * over the EIP712-formatted function arguments.\n * - the signature must use ``owner``'s current nonce (see {nonces}).\n *\n * For more information on the signature format, see the\n * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP\n * section].\n */\n function permit(\n address owner,\n address spender,\n uint256 value,\n uint256 deadline,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) external;\n\n /**\n * @dev Returns the current nonce for `owner`. This value must be\n * included whenever a signature is generated for {permit}.\n *\n * Every successful call to {permit} increases ``owner``'s nonce by one. This\n * prevents a signature from being used multiple times.\n */\n function nonces(address owner) external view returns (uint256);\n\n /**\n * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.\n */\n // solhint-disable-next-line func-name-mixedcase\n function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n" | |
| }, | |
| "@openzeppelin/contracts/utils/Address.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n /**\n * @dev Returns true if `account` is a contract.\n *\n * [IMPORTANT]\n * ====\n * It is unsafe to assume that an address for which this function returns\n * false is an externally-owned account (EOA) and not a contract.\n *\n * Among others, `isContract` will return false for the following\n * types of addresses:\n *\n * - an externally-owned account\n * - a contract in construction\n * - an address where a contract will be created\n * - an address where a contract lived, but was destroyed\n * ====\n *\n * [IMPORTANT]\n * ====\n * You shouldn't rely on `isContract` to protect against flash loan attacks!\n *\n * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n * constructor.\n * ====\n */\n function isContract(address account) internal view returns (bool) {\n // This method relies on extcodesize/address.code.length, which returns 0\n // for contracts in construction, since the code is only stored at the end\n // of the constructor execution.\n\n return account.code.length > 0;\n }\n\n /**\n * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n * `recipient`, forwarding all available gas and reverting on errors.\n *\n * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n * of certain opcodes, possibly making contracts go over the 2300 gas limit\n * imposed by `transfer`, making them unable to receive funds via\n * `transfer`. {sendValue} removes this limitation.\n *\n * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n *\n * IMPORTANT: because control is transferred to `recipient`, care must be\n * taken to not create reentrancy vulnerabilities. Consider using\n * {ReentrancyGuard} or the\n * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n */\n function sendValue(address payable recipient, uint256 amount) internal {\n require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n (bool success, ) = recipient.call{value: amount}(\"\");\n require(success, \"Address: unable to send value, recipient may have reverted\");\n }\n\n /**\n * @dev Performs a Solidity function call using a low level `call`. A\n * plain `call` is an unsafe replacement for a function call: use this\n * function instead.\n *\n * If `target` reverts with a revert reason, it is bubbled up by this\n * function (like regular Solidity function calls).\n *\n * Returns the raw returned data. To convert to the expected return value,\n * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n *\n * Requirements:\n *\n * - `target` must be a contract.\n * - calling `target` with `data` must not revert.\n *\n * _Available since v3.1._\n */\n function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionCall(target, data, \"Address: low-level call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n * `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, 0, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but also transferring `value` wei to `target`.\n *\n * Requirements:\n *\n * - the calling contract must have an ETH balance of at least `value`.\n * - the called Solidity function must be `payable`.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n * with `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value,\n string memory errorMessage\n ) internal returns (bytes memory) {\n require(address(this).balance >= value, \"Address: insufficient balance for call\");\n require(isContract(target), \"Address: call to non-contract\");\n\n (bool success, bytes memory returndata) = target.call{value: value}(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n return functionStaticCall(target, data, \"Address: low-level static call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal view returns (bytes memory) {\n require(isContract(target), \"Address: static call to non-contract\");\n\n (bool success, bytes memory returndata) = target.staticcall(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a delegate call.\n *\n * _Available since v3.4._\n */\n function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a delegate call.\n *\n * _Available since v3.4._\n */\n function functionDelegateCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal returns (bytes memory) {\n require(isContract(target), \"Address: delegate call to non-contract\");\n\n (bool success, bytes memory returndata) = target.delegatecall(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the\n * revert reason using the provided one.\n *\n * _Available since v4.3._\n */\n function verifyCallResult(\n bool success,\n bytes memory returndata,\n string memory errorMessage\n ) internal pure returns (bytes memory) {\n if (success) {\n return returndata;\n } else {\n // Look for revert reason and bubble it up if present\n if (returndata.length > 0) {\n // The easiest way to bubble the revert reason is using memory via assembly\n /// @solidity memory-safe-assembly\n assembly {\n let returndata_size := mload(returndata)\n revert(add(32, returndata), returndata_size)\n }\n } else {\n revert(errorMessage);\n }\n }\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/access/Ownable.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n address private _owner;\n\n event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n /**\n * @dev Initializes the contract setting the deployer as the initial owner.\n */\n constructor() {\n _transferOwnership(_msgSender());\n }\n\n /**\n * @dev Throws if called by any account other than the owner.\n */\n modifier onlyOwner() {\n _checkOwner();\n _;\n }\n\n /**\n * @dev Returns the address of the current owner.\n */\n function owner() public view virtual returns (address) {\n return _owner;\n }\n\n /**\n * @dev Throws if the sender is not the owner.\n */\n function _checkOwner() internal view virtual {\n require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n }\n\n /**\n * @dev Leaves the contract without owner. It will not be possible to call\n * `onlyOwner` functions anymore. Can only be called by the current owner.\n *\n * NOTE: Renouncing ownership will leave the contract without an owner,\n * thereby removing any functionality that is only available to the owner.\n */\n function renounceOwnership() public virtual onlyOwner {\n _transferOwnership(address(0));\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Can only be called by the current owner.\n */\n function transferOwnership(address newOwner) public virtual onlyOwner {\n require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n _transferOwnership(newOwner);\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Internal function without access restriction.\n */\n function _transferOwnership(address newOwner) internal virtual {\n address oldOwner = _owner;\n _owner = newOwner;\n emit OwnershipTransferred(oldOwner, newOwner);\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/utils/Context.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n function _msgSender() internal view virtual returns (address) {\n return msg.sender;\n }\n\n function _msgData() internal view virtual returns (bytes calldata) {\n return msg.data;\n }\n}\n" | |
| } | |
| }, | |
| "settings": { | |
| "metadata": { | |
| "bytecodeHash": "none", | |
| "useLiteralContent": true | |
| }, | |
| "optimizer": { | |
| "enabled": true, | |
| "runs": 800 | |
| }, | |
| "outputSelection": { | |
| "*": { | |
| "*": [ | |
| "evm.bytecode", | |
| "evm.deployedBytecode", | |
| "devdoc", | |
| "userdoc", | |
| "metadata", | |
| "abi" | |
| ] | |
| } | |
| }, | |
| "libraries": {} | |
| } | |
| } |