{ "language": "Solidity", "sources": { "GhostEyeTaoist.sol": { "content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.17;\nimport \"@openzeppelin/contracts/utils/cryptography/ECDSA.sol\";\nimport \"erc721a/contracts/ERC721A.sol\";\nimport \"erc721a/contracts/extensions/ERC721AQueryable.sol\";\nimport \"erc721a/contracts/extensions/ERC4907A.sol\";\nimport \"@openzeppelin/contracts/access/Ownable.sol\";\nimport \"@openzeppelin/contracts/security/Pausable.sol\";\nimport \"@openzeppelin/contracts/security/ReentrancyGuard.sol\";\nimport \"@openzeppelin/contracts/token/common/ERC2981.sol\";\n\n/**\n * @author Created with HeyMint Launchpad https://launchpad.heymint.xyz\n * @notice This contract handles minting Ghost eye Taoist tokens.\n */\ncontract GhostEyeTaoist is\n ERC721A,\n ERC721AQueryable,\n ERC4907A,\n Ownable,\n Pausable,\n ReentrancyGuard,\n ERC2981\n{\n using ECDSA for bytes32;\n\n // Used to validate authorized presale mint addresses\n address private presaleSignerAddress =\n 0x863E31FD8D828Ccfb775E746168D53C9A9E25C08;\n // Address of the smart contract used to check if an operator address is from a blocklisted exchange\n address public blocklistContractAddress;\n address public royaltyAddress = 0x9e2FD7b712A60150bADc48f6679efb1C1e6BA3b3;\n address[] public payoutAddresses = [\n 0x9e2FD7b712A60150bADc48f6679efb1C1e6BA3b3\n ];\n // Permanently disable the blocklist so all exchanges are allowed\n bool public blocklistPermanentlyDisabled;\n bool public isPresaleActive;\n bool public isPublicSaleActive;\n // Permanently freezes metadata so it can never be changed\n bool public metadataFrozen;\n // If true, payout addresses and basis points are permanently frozen and can never be updated\n bool public payoutAddressesFrozen;\n // If true, the exchange represented by a uint256 integer is blocklisted and cannot be used to transfer tokens\n mapping(uint256 => bool) public isExchangeBlocklisted;\n string public baseTokenURI =\n \"ipfs://bafybeicdr4g4qbjul6rbh4ar3b7u5lk7ff3neyrtp44xnmxjkgbsiiri2u/\";\n // Maximum supply of tokens that can be minted\n uint256 public MAX_SUPPLY = 1111;\n // Total number of tokens available for minting in the presale\n uint256 public PRESALE_MAX_SUPPLY = 1111;\n uint256 public presaleMintsAllowedPerAddress = 2;\n uint256 public presaleMintsAllowedPerTransaction = 2;\n uint256 public presalePrice = 0.0066 ether;\n uint256 public publicMintsAllowedPerAddress = 2;\n uint256 public publicMintsAllowedPerTransaction = 2;\n uint256 public publicPrice = 0.01 ether;\n // The respective share of funds to be sent to each address in payoutAddresses in basis points\n uint256[] public payoutBasisPoints = [10000];\n uint96 public royaltyFee = 500;\n\n constructor(address _blocklistContractAddress)\n ERC721A(\"Ghost eye Taoist\", \"GET\")\n {\n blocklistContractAddress = _blocklistContractAddress;\n _setDefaultRoyalty(royaltyAddress, royaltyFee);\n require(\n payoutAddresses.length == payoutBasisPoints.length,\n \"PAYOUT_ARRAYS_NOT_SAME_LENGTH\"\n );\n uint256 totalPayoutBasisPoints = 0;\n for (uint256 i = 0; i < payoutBasisPoints.length; i++) {\n totalPayoutBasisPoints += payoutBasisPoints[i];\n }\n require(\n totalPayoutBasisPoints == 10000,\n \"TOTAL_BASIS_POINTS_MUST_BE_10000\"\n );\n }\n\n modifier originalUser() {\n require(tx.origin == msg.sender, \"CANNOT_CALL_FROM_CONTRACT\");\n _;\n }\n\n function _baseURI() internal view virtual override returns (string memory) {\n return baseTokenURI;\n }\n\n /**\n * @dev Overrides the default ERC721A _startTokenId() so tokens begin at 1 instead of 0\n */\n function _startTokenId() internal view virtual override returns (uint256) {\n return 1;\n }\n\n /**\n * @notice Change the royalty fee for the collection\n */\n function setRoyaltyFee(uint96 _feeNumerator) external onlyOwner {\n royaltyFee = _feeNumerator;\n _setDefaultRoyalty(royaltyAddress, royaltyFee);\n }\n\n /**\n * @notice Change the royalty address where royalty payouts are sent\n */\n function setRoyaltyAddress(address _royaltyAddress) external onlyOwner {\n royaltyAddress = _royaltyAddress;\n _setDefaultRoyalty(royaltyAddress, royaltyFee);\n }\n\n /**\n * @notice Wraps and exposes publicly _numberMinted() from ERC721A\n */\n function numberMinted(address owner) public view returns (uint256) {\n return _numberMinted(owner);\n }\n\n /**\n * @notice Update the base token URI\n */\n function setBaseURI(string calldata _newBaseURI) external onlyOwner {\n require(!metadataFrozen, \"METADATA_HAS_BEEN_FROZEN\");\n baseTokenURI = _newBaseURI;\n }\n\n /**\n * @notice Reduce the max supply of tokens\n * @param _newMaxSupply The new maximum supply of tokens available to mint\n */\n function reduceMaxSupply(uint256 _newMaxSupply) external onlyOwner {\n require(_newMaxSupply < MAX_SUPPLY, \"NEW_MAX_SUPPLY_TOO_HIGH\");\n require(\n _newMaxSupply >= totalSupply(),\n \"SUPPLY_LOWER_THAN_MINTED_TOKENS\"\n );\n MAX_SUPPLY = _newMaxSupply;\n }\n\n /**\n * @notice Freeze metadata so it can never be changed again\n */\n function freezeMetadata() external onlyOwner {\n require(!metadataFrozen, \"METADATA_HAS_ALREADY_BEEN_FROZEN\");\n metadataFrozen = true;\n }\n\n function pause() external onlyOwner {\n _pause();\n }\n\n function unpause() external onlyOwner {\n _unpause();\n }\n\n // https://chiru-labs.github.io/ERC721A/#/migration?id=supportsinterface\n function supportsInterface(bytes4 interfaceId)\n public\n view\n virtual\n override(ERC721A, IERC721A, ERC2981, ERC4907A)\n returns (bool)\n {\n // Supports the following interfaceIds:\n // - IERC165: 0x01ffc9a7\n // - IERC721: 0x80ac58cd\n // - IERC721Metadata: 0x5b5e139f\n // - IERC2981: 0x2a55205a\n // - IERC4907: 0xad092b5c\n return\n ERC721A.supportsInterface(interfaceId) ||\n ERC2981.supportsInterface(interfaceId) ||\n ERC4907A.supportsInterface(interfaceId);\n }\n\n /**\n * @notice Allow owner to send 'mintNumber' tokens without cost to multiple addresses\n */\n function gift(address[] calldata receivers, uint256[] calldata mintNumber)\n external\n onlyOwner\n {\n require(\n receivers.length == mintNumber.length,\n \"ARRAYS_MUST_BE_SAME_LENGTH\"\n );\n uint256 totalMint = 0;\n for (uint256 i = 0; i < mintNumber.length; i++) {\n totalMint += mintNumber[i];\n }\n require(totalSupply() + totalMint <= MAX_SUPPLY, \"MINT_TOO_LARGE\");\n for (uint256 i = 0; i < receivers.length; i++) {\n _safeMint(receivers[i], mintNumber[i]);\n }\n }\n\n /**\n * @notice To be updated by contract owner to allow public sale minting\n */\n function setPublicSaleState(bool _saleActiveState) external onlyOwner {\n require(\n isPublicSaleActive != _saleActiveState,\n \"NEW_STATE_IDENTICAL_TO_OLD_STATE\"\n );\n isPublicSaleActive = _saleActiveState;\n }\n\n /**\n * @notice Update the public mint price\n */\n function setPublicPrice(uint256 _publicPrice) external onlyOwner {\n publicPrice = _publicPrice;\n }\n\n /**\n * @notice Set the maximum mints allowed per a given address in the public sale\n */\n function setPublicMintsAllowedPerAddress(uint256 _mintsAllowed)\n external\n onlyOwner\n {\n publicMintsAllowedPerAddress = _mintsAllowed;\n }\n\n /**\n * @notice Set the maximum public mints allowed per a given transaction\n */\n function setPublicMintsAllowedPerTransaction(uint256 _mintsAllowed)\n external\n onlyOwner\n {\n publicMintsAllowedPerTransaction = _mintsAllowed;\n }\n\n /**\n * @notice Allow for public minting of tokens\n */\n function mint(uint256 numTokens)\n external\n payable\n nonReentrant\n originalUser\n {\n require(isPublicSaleActive, \"PUBLIC_SALE_IS_NOT_ACTIVE\");\n\n require(\n numTokens <= publicMintsAllowedPerTransaction,\n \"MAX_MINTS_PER_TX_EXCEEDED\"\n );\n require(\n _numberMinted(msg.sender) + numTokens <=\n publicMintsAllowedPerAddress,\n \"MAX_MINTS_EXCEEDED\"\n );\n require(totalSupply() + numTokens <= MAX_SUPPLY, \"MAX_SUPPLY_EXCEEDED\");\n require(msg.value == publicPrice * numTokens, \"PAYMENT_INCORRECT\");\n\n _safeMint(msg.sender, numTokens);\n\n if (totalSupply() >= MAX_SUPPLY) {\n isPublicSaleActive = false;\n }\n }\n\n /**\n * @notice To be updated by contract owner to allow presale minting\n */\n function setPresaleState(bool _saleActiveState) external onlyOwner {\n require(\n isPresaleActive != _saleActiveState,\n \"NEW_STATE_IDENTICAL_TO_OLD_STATE\"\n );\n isPresaleActive = _saleActiveState;\n }\n\n /**\n * @notice Update the presale mint price\n */\n function setPresalePrice(uint256 _presalePrice) external onlyOwner {\n presalePrice = _presalePrice;\n }\n\n /**\n * @notice Set the maximum mints allowed per a given address in the presale\n */\n function setPresaleMintsAllowedPerAddress(uint256 _mintsAllowed)\n external\n onlyOwner\n {\n presaleMintsAllowedPerAddress = _mintsAllowed;\n }\n\n /**\n * @notice Set the maximum presale mints allowed per a given transaction\n */\n function setPresaleMintsAllowedPerTransaction(uint256 _mintsAllowed)\n external\n onlyOwner\n {\n presaleMintsAllowedPerTransaction = _mintsAllowed;\n }\n\n /**\n * @notice Reduce the max supply of tokens available to mint in the presale\n * @param _newPresaleMaxSupply The new maximum supply of presale tokens available to mint\n */\n function reducePresaleMaxSupply(uint256 _newPresaleMaxSupply)\n external\n onlyOwner\n {\n require(\n _newPresaleMaxSupply < PRESALE_MAX_SUPPLY,\n \"NEW_MAX_SUPPLY_TOO_HIGH\"\n );\n PRESALE_MAX_SUPPLY = _newPresaleMaxSupply;\n }\n\n /**\n * @notice Set the signer address used to verify presale minting\n */\n function setPresaleSignerAddress(address _presaleSignerAddress)\n external\n onlyOwner\n {\n require(_presaleSignerAddress != address(0));\n presaleSignerAddress = _presaleSignerAddress;\n }\n\n /**\n * @notice Verify that a signed message is validly signed by the presaleSignerAddress\n */\n function verifySignerAddress(bytes32 messageHash, bytes calldata signature)\n private\n view\n returns (bool)\n {\n return\n presaleSignerAddress ==\n messageHash.toEthSignedMessageHash().recover(signature);\n }\n\n /**\n * @notice Allow for allowlist minting of tokens\n */\n function presaleMint(\n bytes32 messageHash,\n bytes calldata signature,\n uint256 numTokens,\n uint256 maximumAllowedMints\n ) external payable nonReentrant originalUser {\n require(isPresaleActive, \"PRESALE_IS_NOT_ACTIVE\");\n\n require(\n numTokens <= presaleMintsAllowedPerTransaction,\n \"MAX_MINTS_PER_TX_EXCEEDED\"\n );\n require(\n _numberMinted(msg.sender) + numTokens <=\n presaleMintsAllowedPerAddress,\n \"MAX_MINTS_PER_ADDRESS_EXCEEDED\"\n );\n require(\n _numberMinted(msg.sender) + numTokens <= maximumAllowedMints,\n \"MAX_MINTS_EXCEEDED\"\n );\n require(\n totalSupply() + numTokens <= PRESALE_MAX_SUPPLY,\n \"MAX_SUPPLY_EXCEEDED\"\n );\n require(msg.value == presalePrice * numTokens, \"PAYMENT_INCORRECT\");\n require(\n keccak256(abi.encode(msg.sender, maximumAllowedMints)) ==\n messageHash,\n \"MESSAGE_INVALID\"\n );\n require(\n verifySignerAddress(messageHash, signature),\n \"SIGNATURE_VALIDATION_FAILED\"\n );\n\n _safeMint(msg.sender, numTokens);\n\n if (totalSupply() >= PRESALE_MAX_SUPPLY) {\n isPresaleActive = false;\n }\n }\n\n /**\n * @notice Freeze all payout addresses and percentages so they can never be changed again\n */\n function freezePayoutAddresses() external onlyOwner {\n require(!payoutAddressesFrozen, \"PAYOUT_ADDRESSES_ALREADY_FROZEN\");\n payoutAddressesFrozen = true;\n }\n\n /**\n * @notice Update payout addresses and basis points for each addresses' respective share of contract funds\n */\n function updatePayoutAddressesAndBasisPoints(\n address[] calldata _payoutAddresses,\n uint256[] calldata _payoutBasisPoints\n ) external onlyOwner {\n require(!payoutAddressesFrozen, \"PAYOUT_ADDRESSES_FROZEN\");\n require(\n _payoutAddresses.length == _payoutBasisPoints.length,\n \"ARRAY_LENGTHS_MUST_MATCH\"\n );\n uint256 totalBasisPoints = 0;\n for (uint256 i = 0; i < _payoutBasisPoints.length; i++) {\n totalBasisPoints += _payoutBasisPoints[i];\n }\n require(totalBasisPoints == 10000, \"TOTAL_BASIS_POINTS_MUST_BE_10000\");\n payoutAddresses = _payoutAddresses;\n payoutBasisPoints = _payoutBasisPoints;\n }\n\n /**\n * @notice Withdraws all funds held within contract\n */\n function withdraw() external nonReentrant onlyOwner {\n require(address(this).balance > 0, \"CONTRACT_HAS_NO_BALANCE\");\n uint256 balance = address(this).balance;\n for (uint256 i = 0; i < payoutAddresses.length; i++) {\n uint256 amount = (balance * payoutBasisPoints[i]) / 10000;\n (bool success, ) = payoutAddresses[i].call{value: amount}(\"\");\n require(success, \"Transfer failed.\");\n }\n }\n\n /**\n * @dev Require that the address being approved is not from a blocklisted exchange\n */\n modifier onlyAllowedOperatorApproval(address operator) {\n uint256 operatorExchangeId = IExchangeOperatorAddressList(\n blocklistContractAddress\n ).operatorAddressToExchange(operator);\n require(\n blocklistPermanentlyDisabled ||\n !isExchangeBlocklisted[operatorExchangeId],\n \"BLOCKLISTED_EXCHANGE\"\n );\n _;\n }\n\n /**\n * @notice Update blocklist contract address to a custom contract address if desired for custom functionality\n */\n function updateBlocklistContractAddress(address _blocklistContractAddress)\n external\n onlyOwner\n {\n blocklistContractAddress = _blocklistContractAddress;\n }\n\n /**\n * @notice Permanently disable the blocklist so all exchanges are allowed forever\n */\n function permanentlyDisableBlocklist() external onlyOwner {\n require(!blocklistPermanentlyDisabled, \"BLOCKLIST_ALREADY_DISABLED\");\n blocklistPermanentlyDisabled = true;\n }\n\n /**\n * @notice Set or unset an exchange contract address as blocklisted\n */\n function updateBlocklistedExchanges(\n uint256[] calldata exchanges,\n bool[] calldata blocklisted\n ) external onlyOwner {\n require(\n exchanges.length == blocklisted.length,\n \"ARRAYS_MUST_BE_SAME_LENGTH\"\n );\n for (uint256 i = 0; i < exchanges.length; i++) {\n isExchangeBlocklisted[exchanges[i]] = blocklisted[i];\n }\n }\n\n function _beforeTokenTransfers(\n address from,\n address to,\n uint256 tokenId,\n uint256 quantity\n ) internal override(ERC721A) whenNotPaused {\n uint256 operatorExchangeId = IExchangeOperatorAddressList(\n blocklistContractAddress\n ).operatorAddressToExchange(msg.sender);\n require(\n blocklistPermanentlyDisabled ||\n !isExchangeBlocklisted[operatorExchangeId],\n \"BLOCKLISTED_EXCHANGE\"\n );\n super._beforeTokenTransfers(from, to, tokenId, quantity);\n }\n}\n\ninterface IExchangeOperatorAddressList {\n function operatorAddressToExchange(address operatorAddress)\n external\n view\n returns (uint256);\n}\n" }, "@openzeppelin/contracts/utils/cryptography/ECDSA.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.3) (utils/cryptography/ECDSA.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../Strings.sol\";\n\n/**\n * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.\n *\n * These functions can be used to verify that a message was signed by the holder\n * of the private keys of a given address.\n */\nlibrary ECDSA {\n enum RecoverError {\n NoError,\n InvalidSignature,\n InvalidSignatureLength,\n InvalidSignatureS,\n InvalidSignatureV\n }\n\n function _throwError(RecoverError error) private pure {\n if (error == RecoverError.NoError) {\n return; // no error: do nothing\n } else if (error == RecoverError.InvalidSignature) {\n revert(\"ECDSA: invalid signature\");\n } else if (error == RecoverError.InvalidSignatureLength) {\n revert(\"ECDSA: invalid signature length\");\n } else if (error == RecoverError.InvalidSignatureS) {\n revert(\"ECDSA: invalid signature 's' value\");\n } else if (error == RecoverError.InvalidSignatureV) {\n revert(\"ECDSA: invalid signature 'v' value\");\n }\n }\n\n /**\n * @dev Returns the address that signed a hashed message (`hash`) with\n * `signature` or error string. This address can then be used for verification purposes.\n *\n * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:\n * this function rejects them by requiring the `s` value to be in the lower\n * half order, and the `v` value to be either 27 or 28.\n *\n * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n * verification to be secure: it is possible to craft signatures that\n * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n * this is by receiving a hash of the original message (which may otherwise\n * be too long), and then calling {toEthSignedMessageHash} on it.\n *\n * Documentation for signature generation:\n * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]\n * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]\n *\n * _Available since v4.3._\n */\n function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {\n if (signature.length == 65) {\n bytes32 r;\n bytes32 s;\n uint8 v;\n // ecrecover takes the signature parameters, and the only way to get them\n // currently is to use assembly.\n /// @solidity memory-safe-assembly\n assembly {\n r := mload(add(signature, 0x20))\n s := mload(add(signature, 0x40))\n v := byte(0, mload(add(signature, 0x60)))\n }\n return tryRecover(hash, v, r, s);\n } else {\n return (address(0), RecoverError.InvalidSignatureLength);\n }\n }\n\n /**\n * @dev Returns the address that signed a hashed message (`hash`) with\n * `signature`. This address can then be used for verification purposes.\n *\n * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:\n * this function rejects them by requiring the `s` value to be in the lower\n * half order, and the `v` value to be either 27 or 28.\n *\n * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n * verification to be secure: it is possible to craft signatures that\n * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n * this is by receiving a hash of the original message (which may otherwise\n * be too long), and then calling {toEthSignedMessageHash} on it.\n */\n function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {\n (address recovered, RecoverError error) = tryRecover(hash, signature);\n _throwError(error);\n return recovered;\n }\n\n /**\n * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.\n *\n * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]\n *\n * _Available since v4.3._\n */\n function tryRecover(\n bytes32 hash,\n bytes32 r,\n bytes32 vs\n ) internal pure returns (address, RecoverError) {\n bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);\n uint8 v = uint8((uint256(vs) >> 255) + 27);\n return tryRecover(hash, v, r, s);\n }\n\n /**\n * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.\n *\n * _Available since v4.2._\n */\n function recover(\n bytes32 hash,\n bytes32 r,\n bytes32 vs\n ) internal pure returns (address) {\n (address recovered, RecoverError error) = tryRecover(hash, r, vs);\n _throwError(error);\n return recovered;\n }\n\n /**\n * @dev Overload of {ECDSA-tryRecover} that receives the `v`,\n * `r` and `s` signature fields separately.\n *\n * _Available since v4.3._\n */\n function tryRecover(\n bytes32 hash,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) internal pure returns (address, RecoverError) {\n // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature\n // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines\n // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most\n // signatures from current libraries generate a unique signature with an s-value in the lower half order.\n //\n // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value\n // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or\n // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept\n // these malleable signatures as well.\n if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {\n return (address(0), RecoverError.InvalidSignatureS);\n }\n if (v != 27 && v != 28) {\n return (address(0), RecoverError.InvalidSignatureV);\n }\n\n // If the signature is valid (and not malleable), return the signer address\n address signer = ecrecover(hash, v, r, s);\n if (signer == address(0)) {\n return (address(0), RecoverError.InvalidSignature);\n }\n\n return (signer, RecoverError.NoError);\n }\n\n /**\n * @dev Overload of {ECDSA-recover} that receives the `v`,\n * `r` and `s` signature fields separately.\n */\n function recover(\n bytes32 hash,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) internal pure returns (address) {\n (address recovered, RecoverError error) = tryRecover(hash, v, r, s);\n _throwError(error);\n return recovered;\n }\n\n /**\n * @dev Returns an Ethereum Signed Message, created from a `hash`. This\n * produces hash corresponding to the one signed with the\n * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]\n * JSON-RPC method as part of EIP-191.\n *\n * See {recover}.\n */\n function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {\n // 32 is the length in bytes of hash,\n // enforced by the type signature above\n return keccak256(abi.encodePacked(\"\\x19Ethereum Signed Message:\\n32\", hash));\n }\n\n /**\n * @dev Returns an Ethereum Signed Message, created from `s`. This\n * produces hash corresponding to the one signed with the\n * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]\n * JSON-RPC method as part of EIP-191.\n *\n * See {recover}.\n */\n function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {\n return keccak256(abi.encodePacked(\"\\x19Ethereum Signed Message:\\n\", Strings.toString(s.length), s));\n }\n\n /**\n * @dev Returns an Ethereum Signed Typed Data, created from a\n * `domainSeparator` and a `structHash`. This produces hash corresponding\n * to the one signed with the\n * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]\n * JSON-RPC method as part of EIP-712.\n *\n * See {recover}.\n */\n function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {\n return keccak256(abi.encodePacked(\"\\x19\\x01\", domainSeparator, structHash));\n }\n}\n" }, "erc721a/contracts/ERC721A.sol": { "content": "// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.2\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\nimport './IERC721A.sol';\n\n/**\n * @dev Interface of ERC721 token receiver.\n */\ninterface ERC721A__IERC721Receiver {\n function onERC721Received(\n address operator,\n address from,\n uint256 tokenId,\n bytes calldata data\n ) external returns (bytes4);\n}\n\n/**\n * @title ERC721A\n *\n * @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)\n * Non-Fungible Token Standard, including the Metadata extension.\n * Optimized for lower gas during batch mints.\n *\n * Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)\n * starting from `_startTokenId()`.\n *\n * Assumptions:\n *\n * - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.\n * - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).\n */\ncontract ERC721A is IERC721A {\n // Reference type for token approval.\n struct TokenApprovalRef {\n address value;\n }\n\n // =============================================================\n // CONSTANTS\n // =============================================================\n\n // Mask of an entry in packed address data.\n uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;\n\n // The bit position of `numberMinted` in packed address data.\n uint256 private constant _BITPOS_NUMBER_MINTED = 64;\n\n // The bit position of `numberBurned` in packed address data.\n uint256 private constant _BITPOS_NUMBER_BURNED = 128;\n\n // The bit position of `aux` in packed address data.\n uint256 private constant _BITPOS_AUX = 192;\n\n // Mask of all 256 bits in packed address data except the 64 bits for `aux`.\n uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;\n\n // The bit position of `startTimestamp` in packed ownership.\n uint256 private constant _BITPOS_START_TIMESTAMP = 160;\n\n // The bit mask of the `burned` bit in packed ownership.\n uint256 private constant _BITMASK_BURNED = 1 << 224;\n\n // The bit position of the `nextInitialized` bit in packed ownership.\n uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;\n\n // The bit mask of the `nextInitialized` bit in packed ownership.\n uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;\n\n // The bit position of `extraData` in packed ownership.\n uint256 private constant _BITPOS_EXTRA_DATA = 232;\n\n // Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.\n uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;\n\n // The mask of the lower 160 bits for addresses.\n uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;\n\n // The maximum `quantity` that can be minted with {_mintERC2309}.\n // This limit is to prevent overflows on the address data entries.\n // For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}\n // is required to cause an overflow, which is unrealistic.\n uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;\n\n // The `Transfer` event signature is given by:\n // `keccak256(bytes(\"Transfer(address,address,uint256)\"))`.\n bytes32 private constant _TRANSFER_EVENT_SIGNATURE =\n 0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;\n\n // =============================================================\n // STORAGE\n // =============================================================\n\n // The next token ID to be minted.\n uint256 private _currentIndex;\n\n // The number of tokens burned.\n uint256 private _burnCounter;\n\n // Token name\n string private _name;\n\n // Token symbol\n string private _symbol;\n\n // Mapping from token ID to ownership details\n // An empty struct value does not necessarily mean the token is unowned.\n // See {_packedOwnershipOf} implementation for details.\n //\n // Bits Layout:\n // - [0..159] `addr`\n // - [160..223] `startTimestamp`\n // - [224] `burned`\n // - [225] `nextInitialized`\n // - [232..255] `extraData`\n mapping(uint256 => uint256) private _packedOwnerships;\n\n // Mapping owner address to address data.\n //\n // Bits Layout:\n // - [0..63] `balance`\n // - [64..127] `numberMinted`\n // - [128..191] `numberBurned`\n // - [192..255] `aux`\n mapping(address => uint256) private _packedAddressData;\n\n // Mapping from token ID to approved address.\n mapping(uint256 => TokenApprovalRef) private _tokenApprovals;\n\n // Mapping from owner to operator approvals\n mapping(address => mapping(address => bool)) private _operatorApprovals;\n\n // =============================================================\n // CONSTRUCTOR\n // =============================================================\n\n constructor(string memory name_, string memory symbol_) {\n _name = name_;\n _symbol = symbol_;\n _currentIndex = _startTokenId();\n }\n\n // =============================================================\n // TOKEN COUNTING OPERATIONS\n // =============================================================\n\n /**\n * @dev Returns the starting token ID.\n * To change the starting token ID, please override this function.\n */\n function _startTokenId() internal view virtual returns (uint256) {\n return 0;\n }\n\n /**\n * @dev Returns the next token ID to be minted.\n */\n function _nextTokenId() internal view virtual returns (uint256) {\n return _currentIndex;\n }\n\n /**\n * @dev Returns the total number of tokens in existence.\n * Burned tokens will reduce the count.\n * To get the total number of tokens minted, please see {_totalMinted}.\n */\n function totalSupply() public view virtual override returns (uint256) {\n // Counter underflow is impossible as _burnCounter cannot be incremented\n // more than `_currentIndex - _startTokenId()` times.\n unchecked {\n return _currentIndex - _burnCounter - _startTokenId();\n }\n }\n\n /**\n * @dev Returns the total amount of tokens minted in the contract.\n */\n function _totalMinted() internal view virtual returns (uint256) {\n // Counter underflow is impossible as `_currentIndex` does not decrement,\n // and it is initialized to `_startTokenId()`.\n unchecked {\n return _currentIndex - _startTokenId();\n }\n }\n\n /**\n * @dev Returns the total number of tokens burned.\n */\n function _totalBurned() internal view virtual returns (uint256) {\n return _burnCounter;\n }\n\n // =============================================================\n // ADDRESS DATA OPERATIONS\n // =============================================================\n\n /**\n * @dev Returns the number of tokens in `owner`'s account.\n */\n function balanceOf(address owner) public view virtual override returns (uint256) {\n if (owner == address(0)) revert BalanceQueryForZeroAddress();\n return _packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;\n }\n\n /**\n * Returns the number of tokens minted by `owner`.\n */\n function _numberMinted(address owner) internal view returns (uint256) {\n return (_packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;\n }\n\n /**\n * Returns the number of tokens burned by or on behalf of `owner`.\n */\n function _numberBurned(address owner) internal view returns (uint256) {\n return (_packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;\n }\n\n /**\n * Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).\n */\n function _getAux(address owner) internal view returns (uint64) {\n return uint64(_packedAddressData[owner] >> _BITPOS_AUX);\n }\n\n /**\n * Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).\n * If there are multiple variables, please pack them into a uint64.\n */\n function _setAux(address owner, uint64 aux) internal virtual {\n uint256 packed = _packedAddressData[owner];\n uint256 auxCasted;\n // Cast `aux` with assembly to avoid redundant masking.\n assembly {\n auxCasted := aux\n }\n packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);\n _packedAddressData[owner] = packed;\n }\n\n // =============================================================\n // IERC165\n // =============================================================\n\n /**\n * @dev Returns true if this contract implements the interface defined by\n * `interfaceId`. See the corresponding\n * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)\n * to learn more about how these ids are created.\n *\n * This function call must use less than 30000 gas.\n */\n function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n // The interface IDs are constants representing the first 4 bytes\n // of the XOR of all function selectors in the interface.\n // See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)\n // (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)\n return\n interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.\n interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.\n interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.\n }\n\n // =============================================================\n // IERC721Metadata\n // =============================================================\n\n /**\n * @dev Returns the token collection name.\n */\n function name() public view virtual override returns (string memory) {\n return _name;\n }\n\n /**\n * @dev Returns the token collection symbol.\n */\n function symbol() public view virtual override returns (string memory) {\n return _symbol;\n }\n\n /**\n * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n */\n function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {\n if (!_exists(tokenId)) revert URIQueryForNonexistentToken();\n\n string memory baseURI = _baseURI();\n return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';\n }\n\n /**\n * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n * by default, it can be overridden in child contracts.\n */\n function _baseURI() internal view virtual returns (string memory) {\n return '';\n }\n\n // =============================================================\n // OWNERSHIPS OPERATIONS\n // =============================================================\n\n /**\n * @dev Returns the owner of the `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function ownerOf(uint256 tokenId) public view virtual override returns (address) {\n return address(uint160(_packedOwnershipOf(tokenId)));\n }\n\n /**\n * @dev Gas spent here starts off proportional to the maximum mint batch size.\n * It gradually moves to O(1) as tokens get transferred around over time.\n */\n function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {\n return _unpackedOwnership(_packedOwnershipOf(tokenId));\n }\n\n /**\n * @dev Returns the unpacked `TokenOwnership` struct at `index`.\n */\n function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {\n return _unpackedOwnership(_packedOwnerships[index]);\n }\n\n /**\n * @dev Initializes the ownership slot minted at `index` for efficiency purposes.\n */\n function _initializeOwnershipAt(uint256 index) internal virtual {\n if (_packedOwnerships[index] == 0) {\n _packedOwnerships[index] = _packedOwnershipOf(index);\n }\n }\n\n /**\n * Returns the packed ownership data of `tokenId`.\n */\n function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {\n uint256 curr = tokenId;\n\n unchecked {\n if (_startTokenId() <= curr)\n if (curr < _currentIndex) {\n uint256 packed = _packedOwnerships[curr];\n // If not burned.\n if (packed & _BITMASK_BURNED == 0) {\n // Invariant:\n // There will always be an initialized ownership slot\n // (i.e. `ownership.addr != address(0) && ownership.burned == false`)\n // before an unintialized ownership slot\n // (i.e. `ownership.addr == address(0) && ownership.burned == false`)\n // Hence, `curr` will not underflow.\n //\n // We can directly compare the packed value.\n // If the address is zero, packed will be zero.\n while (packed == 0) {\n packed = _packedOwnerships[--curr];\n }\n return packed;\n }\n }\n }\n revert OwnerQueryForNonexistentToken();\n }\n\n /**\n * @dev Returns the unpacked `TokenOwnership` struct from `packed`.\n */\n function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {\n ownership.addr = address(uint160(packed));\n ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);\n ownership.burned = packed & _BITMASK_BURNED != 0;\n ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);\n }\n\n /**\n * @dev Packs ownership data into a single uint256.\n */\n function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {\n assembly {\n // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.\n owner := and(owner, _BITMASK_ADDRESS)\n // `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.\n result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))\n }\n }\n\n /**\n * @dev Returns the `nextInitialized` flag set if `quantity` equals 1.\n */\n function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {\n // For branchless setting of the `nextInitialized` flag.\n assembly {\n // `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.\n result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))\n }\n }\n\n // =============================================================\n // APPROVAL OPERATIONS\n // =============================================================\n\n /**\n * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n * The approval is cleared when the token is transferred.\n *\n * Only a single account can be approved at a time, so approving the\n * zero address clears previous approvals.\n *\n * Requirements:\n *\n * - The caller must own the token or be an approved operator.\n * - `tokenId` must exist.\n *\n * Emits an {Approval} event.\n */\n function approve(address to, uint256 tokenId) public virtual override {\n address owner = ownerOf(tokenId);\n\n if (_msgSenderERC721A() != owner)\n if (!isApprovedForAll(owner, _msgSenderERC721A())) {\n revert ApprovalCallerNotOwnerNorApproved();\n }\n\n _tokenApprovals[tokenId].value = to;\n emit Approval(owner, to, tokenId);\n }\n\n /**\n * @dev Returns the account approved for `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function getApproved(uint256 tokenId) public view virtual override returns (address) {\n if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();\n\n return _tokenApprovals[tokenId].value;\n }\n\n /**\n * @dev Approve or remove `operator` as an operator for the caller.\n * Operators can call {transferFrom} or {safeTransferFrom}\n * for any token owned by the caller.\n *\n * Requirements:\n *\n * - The `operator` cannot be the caller.\n *\n * Emits an {ApprovalForAll} event.\n */\n function setApprovalForAll(address operator, bool approved) public virtual override {\n if (operator == _msgSenderERC721A()) revert ApproveToCaller();\n\n _operatorApprovals[_msgSenderERC721A()][operator] = approved;\n emit ApprovalForAll(_msgSenderERC721A(), operator, approved);\n }\n\n /**\n * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n *\n * See {setApprovalForAll}.\n */\n function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {\n return _operatorApprovals[owner][operator];\n }\n\n /**\n * @dev Returns whether `tokenId` exists.\n *\n * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.\n *\n * Tokens start existing when they are minted. See {_mint}.\n */\n function _exists(uint256 tokenId) internal view virtual returns (bool) {\n return\n _startTokenId() <= tokenId &&\n tokenId < _currentIndex && // If within bounds,\n _packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.\n }\n\n /**\n * @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.\n */\n function _isSenderApprovedOrOwner(\n address approvedAddress,\n address owner,\n address msgSender\n ) private pure returns (bool result) {\n assembly {\n // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.\n owner := and(owner, _BITMASK_ADDRESS)\n // Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.\n msgSender := and(msgSender, _BITMASK_ADDRESS)\n // `msgSender == owner || msgSender == approvedAddress`.\n result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))\n }\n }\n\n /**\n * @dev Returns the storage slot and value for the approved address of `tokenId`.\n */\n function _getApprovedSlotAndAddress(uint256 tokenId)\n private\n view\n returns (uint256 approvedAddressSlot, address approvedAddress)\n {\n TokenApprovalRef storage tokenApproval = _tokenApprovals[tokenId];\n // The following is equivalent to `approvedAddress = _tokenApprovals[tokenId]`.\n assembly {\n approvedAddressSlot := tokenApproval.slot\n approvedAddress := sload(approvedAddressSlot)\n }\n }\n\n // =============================================================\n // TRANSFER OPERATIONS\n // =============================================================\n\n /**\n * @dev Transfers `tokenId` from `from` to `to`.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must be owned by `from`.\n * - If the caller is not `from`, it must be approved to move this token\n * by either {approve} or {setApprovalForAll}.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(\n address from,\n address to,\n uint256 tokenId\n ) public virtual override {\n uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);\n\n if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();\n\n (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);\n\n // The nested ifs save around 20+ gas over a compound boolean condition.\n if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))\n if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();\n\n if (to == address(0)) revert TransferToZeroAddress();\n\n _beforeTokenTransfers(from, to, tokenId, 1);\n\n // Clear approvals from the previous owner.\n assembly {\n if approvedAddress {\n // This is equivalent to `delete _tokenApprovals[tokenId]`.\n sstore(approvedAddressSlot, 0)\n }\n }\n\n // Underflow of the sender's balance is impossible because we check for\n // ownership above and the recipient's balance can't realistically overflow.\n // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.\n unchecked {\n // We can directly increment and decrement the balances.\n --_packedAddressData[from]; // Updates: `balance -= 1`.\n ++_packedAddressData[to]; // Updates: `balance += 1`.\n\n // Updates:\n // - `address` to the next owner.\n // - `startTimestamp` to the timestamp of transfering.\n // - `burned` to `false`.\n // - `nextInitialized` to `true`.\n _packedOwnerships[tokenId] = _packOwnershipData(\n to,\n _BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)\n );\n\n // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .\n if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {\n uint256 nextTokenId = tokenId + 1;\n // If the next slot's address is zero and not burned (i.e. packed value is zero).\n if (_packedOwnerships[nextTokenId] == 0) {\n // If the next slot is within bounds.\n if (nextTokenId != _currentIndex) {\n // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.\n _packedOwnerships[nextTokenId] = prevOwnershipPacked;\n }\n }\n }\n }\n\n emit Transfer(from, to, tokenId);\n _afterTokenTransfers(from, to, tokenId, 1);\n }\n\n /**\n * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId\n ) public virtual override {\n safeTransferFrom(from, to, tokenId, '');\n }\n\n /**\n * @dev Safely transfers `tokenId` token from `from` to `to`.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must exist and be owned by `from`.\n * - If the caller is not `from`, it must be approved to move this token\n * by either {approve} or {setApprovalForAll}.\n * - If `to` refers to a smart contract, it must implement\n * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n *\n * Emits a {Transfer} event.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId,\n bytes memory _data\n ) public virtual override {\n transferFrom(from, to, tokenId);\n if (to.code.length != 0)\n if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {\n revert TransferToNonERC721ReceiverImplementer();\n }\n }\n\n /**\n * @dev Hook that is called before a set of serially-ordered token IDs\n * are about to be transferred. This includes minting.\n * And also called before burning one token.\n *\n * `startTokenId` - the first token ID to be transferred.\n * `quantity` - the amount to be transferred.\n *\n * Calling conditions:\n *\n * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be\n * transferred to `to`.\n * - When `from` is zero, `tokenId` will be minted for `to`.\n * - When `to` is zero, `tokenId` will be burned by `from`.\n * - `from` and `to` are never both zero.\n */\n function _beforeTokenTransfers(\n address from,\n address to,\n uint256 startTokenId,\n uint256 quantity\n ) internal virtual {}\n\n /**\n * @dev Hook that is called after a set of serially-ordered token IDs\n * have been transferred. This includes minting.\n * And also called after one token has been burned.\n *\n * `startTokenId` - the first token ID to be transferred.\n * `quantity` - the amount to be transferred.\n *\n * Calling conditions:\n *\n * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been\n * transferred to `to`.\n * - When `from` is zero, `tokenId` has been minted for `to`.\n * - When `to` is zero, `tokenId` has been burned by `from`.\n * - `from` and `to` are never both zero.\n */\n function _afterTokenTransfers(\n address from,\n address to,\n uint256 startTokenId,\n uint256 quantity\n ) internal virtual {}\n\n /**\n * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.\n *\n * `from` - Previous owner of the given token ID.\n * `to` - Target address that will receive the token.\n * `tokenId` - Token ID to be transferred.\n * `_data` - Optional data to send along with the call.\n *\n * Returns whether the call correctly returned the expected magic value.\n */\n function _checkContractOnERC721Received(\n address from,\n address to,\n uint256 tokenId,\n bytes memory _data\n ) private returns (bool) {\n try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (\n bytes4 retval\n ) {\n return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;\n } catch (bytes memory reason) {\n if (reason.length == 0) {\n revert TransferToNonERC721ReceiverImplementer();\n } else {\n assembly {\n revert(add(32, reason), mload(reason))\n }\n }\n }\n }\n\n // =============================================================\n // MINT OPERATIONS\n // =============================================================\n\n /**\n * @dev Mints `quantity` tokens and transfers them to `to`.\n *\n * Requirements:\n *\n * - `to` cannot be the zero address.\n * - `quantity` must be greater than 0.\n *\n * Emits a {Transfer} event for each mint.\n */\n function _mint(address to, uint256 quantity) internal virtual {\n uint256 startTokenId = _currentIndex;\n if (quantity == 0) revert MintZeroQuantity();\n\n _beforeTokenTransfers(address(0), to, startTokenId, quantity);\n\n // Overflows are incredibly unrealistic.\n // `balance` and `numberMinted` have a maximum limit of 2**64.\n // `tokenId` has a maximum limit of 2**256.\n unchecked {\n // Updates:\n // - `balance += quantity`.\n // - `numberMinted += quantity`.\n //\n // We can directly add to the `balance` and `numberMinted`.\n _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);\n\n // Updates:\n // - `address` to the owner.\n // - `startTimestamp` to the timestamp of minting.\n // - `burned` to `false`.\n // - `nextInitialized` to `quantity == 1`.\n _packedOwnerships[startTokenId] = _packOwnershipData(\n to,\n _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)\n );\n\n uint256 toMasked;\n uint256 end = startTokenId + quantity;\n\n // Use assembly to loop and emit the `Transfer` event for gas savings.\n assembly {\n // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.\n toMasked := and(to, _BITMASK_ADDRESS)\n // Emit the `Transfer` event.\n log4(\n 0, // Start of data (0, since no data).\n 0, // End of data (0, since no data).\n _TRANSFER_EVENT_SIGNATURE, // Signature.\n 0, // `address(0)`.\n toMasked, // `to`.\n startTokenId // `tokenId`.\n )\n\n for {\n let tokenId := add(startTokenId, 1)\n } iszero(eq(tokenId, end)) {\n tokenId := add(tokenId, 1)\n } {\n // Emit the `Transfer` event. Similar to above.\n log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)\n }\n }\n if (toMasked == 0) revert MintToZeroAddress();\n\n _currentIndex = end;\n }\n _afterTokenTransfers(address(0), to, startTokenId, quantity);\n }\n\n /**\n * @dev Mints `quantity` tokens and transfers them to `to`.\n *\n * This function is intended for efficient minting only during contract creation.\n *\n * It emits only one {ConsecutiveTransfer} as defined in\n * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),\n * instead of a sequence of {Transfer} event(s).\n *\n * Calling this function outside of contract creation WILL make your contract\n * non-compliant with the ERC721 standard.\n * For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309\n * {ConsecutiveTransfer} event is only permissible during contract creation.\n *\n * Requirements:\n *\n * - `to` cannot be the zero address.\n * - `quantity` must be greater than 0.\n *\n * Emits a {ConsecutiveTransfer} event.\n */\n function _mintERC2309(address to, uint256 quantity) internal virtual {\n uint256 startTokenId = _currentIndex;\n if (to == address(0)) revert MintToZeroAddress();\n if (quantity == 0) revert MintZeroQuantity();\n if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();\n\n _beforeTokenTransfers(address(0), to, startTokenId, quantity);\n\n // Overflows are unrealistic due to the above check for `quantity` to be below the limit.\n unchecked {\n // Updates:\n // - `balance += quantity`.\n // - `numberMinted += quantity`.\n //\n // We can directly add to the `balance` and `numberMinted`.\n _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);\n\n // Updates:\n // - `address` to the owner.\n // - `startTimestamp` to the timestamp of minting.\n // - `burned` to `false`.\n // - `nextInitialized` to `quantity == 1`.\n _packedOwnerships[startTokenId] = _packOwnershipData(\n to,\n _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)\n );\n\n emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);\n\n _currentIndex = startTokenId + quantity;\n }\n _afterTokenTransfers(address(0), to, startTokenId, quantity);\n }\n\n /**\n * @dev Safely mints `quantity` tokens and transfers them to `to`.\n *\n * Requirements:\n *\n * - If `to` refers to a smart contract, it must implement\n * {IERC721Receiver-onERC721Received}, which is called for each safe transfer.\n * - `quantity` must be greater than 0.\n *\n * See {_mint}.\n *\n * Emits a {Transfer} event for each mint.\n */\n function _safeMint(\n address to,\n uint256 quantity,\n bytes memory _data\n ) internal virtual {\n _mint(to, quantity);\n\n unchecked {\n if (to.code.length != 0) {\n uint256 end = _currentIndex;\n uint256 index = end - quantity;\n do {\n if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {\n revert TransferToNonERC721ReceiverImplementer();\n }\n } while (index < end);\n // Reentrancy protection.\n if (_currentIndex != end) revert();\n }\n }\n }\n\n /**\n * @dev Equivalent to `_safeMint(to, quantity, '')`.\n */\n function _safeMint(address to, uint256 quantity) internal virtual {\n _safeMint(to, quantity, '');\n }\n\n // =============================================================\n // BURN OPERATIONS\n // =============================================================\n\n /**\n * @dev Equivalent to `_burn(tokenId, false)`.\n */\n function _burn(uint256 tokenId) internal virtual {\n _burn(tokenId, false);\n }\n\n /**\n * @dev Destroys `tokenId`.\n * The approval is cleared when the token is burned.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n *\n * Emits a {Transfer} event.\n */\n function _burn(uint256 tokenId, bool approvalCheck) internal virtual {\n uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);\n\n address from = address(uint160(prevOwnershipPacked));\n\n (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);\n\n if (approvalCheck) {\n // The nested ifs save around 20+ gas over a compound boolean condition.\n if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))\n if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();\n }\n\n _beforeTokenTransfers(from, address(0), tokenId, 1);\n\n // Clear approvals from the previous owner.\n assembly {\n if approvedAddress {\n // This is equivalent to `delete _tokenApprovals[tokenId]`.\n sstore(approvedAddressSlot, 0)\n }\n }\n\n // Underflow of the sender's balance is impossible because we check for\n // ownership above and the recipient's balance can't realistically overflow.\n // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.\n unchecked {\n // Updates:\n // - `balance -= 1`.\n // - `numberBurned += 1`.\n //\n // We can directly decrement the balance, and increment the number burned.\n // This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.\n _packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;\n\n // Updates:\n // - `address` to the last owner.\n // - `startTimestamp` to the timestamp of burning.\n // - `burned` to `true`.\n // - `nextInitialized` to `true`.\n _packedOwnerships[tokenId] = _packOwnershipData(\n from,\n (_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)\n );\n\n // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .\n if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {\n uint256 nextTokenId = tokenId + 1;\n // If the next slot's address is zero and not burned (i.e. packed value is zero).\n if (_packedOwnerships[nextTokenId] == 0) {\n // If the next slot is within bounds.\n if (nextTokenId != _currentIndex) {\n // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.\n _packedOwnerships[nextTokenId] = prevOwnershipPacked;\n }\n }\n }\n }\n\n emit Transfer(from, address(0), tokenId);\n _afterTokenTransfers(from, address(0), tokenId, 1);\n\n // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.\n unchecked {\n _burnCounter++;\n }\n }\n\n // =============================================================\n // EXTRA DATA OPERATIONS\n // =============================================================\n\n /**\n * @dev Directly sets the extra data for the ownership data `index`.\n */\n function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {\n uint256 packed = _packedOwnerships[index];\n if (packed == 0) revert OwnershipNotInitializedForExtraData();\n uint256 extraDataCasted;\n // Cast `extraData` with assembly to avoid redundant masking.\n assembly {\n extraDataCasted := extraData\n }\n packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);\n _packedOwnerships[index] = packed;\n }\n\n /**\n * @dev Called during each token transfer to set the 24bit `extraData` field.\n * Intended to be overridden by the cosumer contract.\n *\n * `previousExtraData` - the value of `extraData` before transfer.\n *\n * Calling conditions:\n *\n * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be\n * transferred to `to`.\n * - When `from` is zero, `tokenId` will be minted for `to`.\n * - When `to` is zero, `tokenId` will be burned by `from`.\n * - `from` and `to` are never both zero.\n */\n function _extraData(\n address from,\n address to,\n uint24 previousExtraData\n ) internal view virtual returns (uint24) {}\n\n /**\n * @dev Returns the next extra data for the packed ownership data.\n * The returned result is shifted into position.\n */\n function _nextExtraData(\n address from,\n address to,\n uint256 prevOwnershipPacked\n ) private view returns (uint256) {\n uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);\n return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;\n }\n\n // =============================================================\n // OTHER OPERATIONS\n // =============================================================\n\n /**\n * @dev Returns the message sender (defaults to `msg.sender`).\n *\n * If you are writing GSN compatible contracts, you need to override this function.\n */\n function _msgSenderERC721A() internal view virtual returns (address) {\n return msg.sender;\n }\n\n /**\n * @dev Converts a uint256 to its ASCII string decimal representation.\n */\n function _toString(uint256 value) internal pure virtual returns (string memory str) {\n assembly {\n // The maximum value of a uint256 contains 78 digits (1 byte per digit),\n // but we allocate 0x80 bytes to keep the free memory pointer 32-byte word aliged.\n // We will need 1 32-byte word to store the length,\n // and 3 32-byte words to store a maximum of 78 digits. Total: 0x20 + 3 * 0x20 = 0x80.\n str := add(mload(0x40), 0x80)\n // Update the free memory pointer to allocate.\n mstore(0x40, str)\n\n // Cache the end of the memory to calculate the length later.\n let end := str\n\n // We write the string from rightmost digit to leftmost digit.\n // The following is essentially a do-while loop that also handles the zero case.\n // prettier-ignore\n for { let temp := value } 1 {} {\n str := sub(str, 1)\n // Write the character to the pointer.\n // The ASCII index of the '0' character is 48.\n mstore8(str, add(48, mod(temp, 10)))\n // Keep dividing `temp` until zero.\n temp := div(temp, 10)\n // prettier-ignore\n if iszero(temp) { break }\n }\n\n let length := sub(end, str)\n // Move the pointer 32 bytes leftwards to make room for the length.\n str := sub(str, 0x20)\n // Store the length.\n mstore(str, length)\n }\n }\n}\n" }, "erc721a/contracts/extensions/ERC721AQueryable.sol": { "content": "// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.2\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\nimport './IERC721AQueryable.sol';\nimport '../ERC721A.sol';\n\n/**\n * @title ERC721AQueryable.\n *\n * @dev ERC721A subclass with convenience query functions.\n */\nabstract contract ERC721AQueryable is ERC721A, IERC721AQueryable {\n /**\n * @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.\n *\n * If the `tokenId` is out of bounds:\n *\n * - `addr = address(0)`\n * - `startTimestamp = 0`\n * - `burned = false`\n * - `extraData = 0`\n *\n * If the `tokenId` is burned:\n *\n * - `addr =
`\n * - `startTimestamp = `\n * - `burned = true`\n * - `extraData = `\n *\n * Otherwise:\n *\n * - `addr =
`\n * - `startTimestamp = `\n * - `burned = false`\n * - `extraData = `\n */\n function explicitOwnershipOf(uint256 tokenId) public view virtual override returns (TokenOwnership memory) {\n TokenOwnership memory ownership;\n if (tokenId < _startTokenId() || tokenId >= _nextTokenId()) {\n return ownership;\n }\n ownership = _ownershipAt(tokenId);\n if (ownership.burned) {\n return ownership;\n }\n return _ownershipOf(tokenId);\n }\n\n /**\n * @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.\n * See {ERC721AQueryable-explicitOwnershipOf}\n */\n function explicitOwnershipsOf(uint256[] calldata tokenIds)\n external\n view\n virtual\n override\n returns (TokenOwnership[] memory)\n {\n unchecked {\n uint256 tokenIdsLength = tokenIds.length;\n TokenOwnership[] memory ownerships = new TokenOwnership[](tokenIdsLength);\n for (uint256 i; i != tokenIdsLength; ++i) {\n ownerships[i] = explicitOwnershipOf(tokenIds[i]);\n }\n return ownerships;\n }\n }\n\n /**\n * @dev Returns an array of token IDs owned by `owner`,\n * in the range [`start`, `stop`)\n * (i.e. `start <= tokenId < stop`).\n *\n * This function allows for tokens to be queried if the collection\n * grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.\n *\n * Requirements:\n *\n * - `start < stop`\n */\n function tokensOfOwnerIn(\n address owner,\n uint256 start,\n uint256 stop\n ) external view virtual override returns (uint256[] memory) {\n unchecked {\n if (start >= stop) revert InvalidQueryRange();\n uint256 tokenIdsIdx;\n uint256 stopLimit = _nextTokenId();\n // Set `start = max(start, _startTokenId())`.\n if (start < _startTokenId()) {\n start = _startTokenId();\n }\n // Set `stop = min(stop, stopLimit)`.\n if (stop > stopLimit) {\n stop = stopLimit;\n }\n uint256 tokenIdsMaxLength = balanceOf(owner);\n // Set `tokenIdsMaxLength = min(balanceOf(owner), stop - start)`,\n // to cater for cases where `balanceOf(owner)` is too big.\n if (start < stop) {\n uint256 rangeLength = stop - start;\n if (rangeLength < tokenIdsMaxLength) {\n tokenIdsMaxLength = rangeLength;\n }\n } else {\n tokenIdsMaxLength = 0;\n }\n uint256[] memory tokenIds = new uint256[](tokenIdsMaxLength);\n if (tokenIdsMaxLength == 0) {\n return tokenIds;\n }\n // We need to call `explicitOwnershipOf(start)`,\n // because the slot at `start` may not be initialized.\n TokenOwnership memory ownership = explicitOwnershipOf(start);\n address currOwnershipAddr;\n // If the starting slot exists (i.e. not burned), initialize `currOwnershipAddr`.\n // `ownership.address` will not be zero, as `start` is clamped to the valid token ID range.\n if (!ownership.burned) {\n currOwnershipAddr = ownership.addr;\n }\n for (uint256 i = start; i != stop && tokenIdsIdx != tokenIdsMaxLength; ++i) {\n ownership = _ownershipAt(i);\n if (ownership.burned) {\n continue;\n }\n if (ownership.addr != address(0)) {\n currOwnershipAddr = ownership.addr;\n }\n if (currOwnershipAddr == owner) {\n tokenIds[tokenIdsIdx++] = i;\n }\n }\n // Downsize the array to fit.\n assembly {\n mstore(tokenIds, tokenIdsIdx)\n }\n return tokenIds;\n }\n }\n\n /**\n * @dev Returns an array of token IDs owned by `owner`.\n *\n * This function scans the ownership mapping and is O(`totalSupply`) in complexity.\n * It is meant to be called off-chain.\n *\n * See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into\n * multiple smaller scans if the collection is large enough to cause\n * an out-of-gas error (10K collections should be fine).\n */\n function tokensOfOwner(address owner) external view virtual override returns (uint256[] memory) {\n unchecked {\n uint256 tokenIdsIdx;\n address currOwnershipAddr;\n uint256 tokenIdsLength = balanceOf(owner);\n uint256[] memory tokenIds = new uint256[](tokenIdsLength);\n TokenOwnership memory ownership;\n for (uint256 i = _startTokenId(); tokenIdsIdx != tokenIdsLength; ++i) {\n ownership = _ownershipAt(i);\n if (ownership.burned) {\n continue;\n }\n if (ownership.addr != address(0)) {\n currOwnershipAddr = ownership.addr;\n }\n if (currOwnershipAddr == owner) {\n tokenIds[tokenIdsIdx++] = i;\n }\n }\n return tokenIds;\n }\n }\n}\n" }, "erc721a/contracts/extensions/ERC4907A.sol": { "content": "// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.2\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\nimport './IERC4907A.sol';\nimport '../ERC721A.sol';\n\n/**\n * @title ERC4907A\n *\n * @dev [ERC4907](https://eips.ethereum.org/EIPS/eip-4907) compliant\n * extension of ERC721A, which allows owners and authorized addresses\n * to add a time-limited role with restricted permissions to ERC721 tokens.\n */\nabstract contract ERC4907A is ERC721A, IERC4907A {\n // The bit position of `expires` in packed user info.\n uint256 private constant _BITPOS_EXPIRES = 160;\n\n // Mapping from token ID to user info.\n //\n // Bits Layout:\n // - [0..159] `user`\n // - [160..223] `expires`\n mapping(uint256 => uint256) private _packedUserInfo;\n\n /**\n * @dev Sets the `user` and `expires` for `tokenId`.\n * The zero address indicates there is no user.\n *\n * Requirements:\n *\n * - The caller must own `tokenId` or be an approved operator.\n */\n function setUser(\n uint256 tokenId,\n address user,\n uint64 expires\n ) public virtual override {\n // Require the caller to be either the token owner or an approved operator.\n address owner = ownerOf(tokenId);\n if (_msgSenderERC721A() != owner)\n if (!isApprovedForAll(owner, _msgSenderERC721A()))\n if (getApproved(tokenId) != _msgSenderERC721A()) revert SetUserCallerNotOwnerNorApproved();\n\n _packedUserInfo[tokenId] = (uint256(expires) << _BITPOS_EXPIRES) | uint256(uint160(user));\n\n emit UpdateUser(tokenId, user, expires);\n }\n\n /**\n * @dev Returns the user address for `tokenId`.\n * The zero address indicates that there is no user or if the user is expired.\n */\n function userOf(uint256 tokenId) public view virtual override returns (address) {\n uint256 packed = _packedUserInfo[tokenId];\n assembly {\n // Branchless `packed *= (block.timestamp <= expires ? 1 : 0)`.\n // If the `block.timestamp == expires`, the `lt` clause will be true\n // if there is a non-zero user address in the lower 160 bits of `packed`.\n packed := mul(\n packed,\n // `block.timestamp <= expires ? 1 : 0`.\n lt(shl(_BITPOS_EXPIRES, timestamp()), packed)\n )\n }\n return address(uint160(packed));\n }\n\n /**\n * @dev Returns the user's expires of `tokenId`.\n */\n function userExpires(uint256 tokenId) public view virtual override returns (uint256) {\n return _packedUserInfo[tokenId] >> _BITPOS_EXPIRES;\n }\n\n /**\n * @dev Override of {IERC165-supportsInterface}.\n */\n function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721A, IERC721A) returns (bool) {\n // The interface ID for ERC4907 is `0xad092b5c`,\n // as defined in [ERC4907](https://eips.ethereum.org/EIPS/eip-4907).\n return super.supportsInterface(interfaceId) || interfaceId == 0xad092b5c;\n }\n\n /**\n * @dev Returns the user address for `tokenId`, ignoring the expiry status.\n */\n function _explicitUserOf(uint256 tokenId) internal view virtual returns (address) {\n return address(uint160(_packedUserInfo[tokenId]));\n }\n}\n" }, "@openzeppelin/contracts/access/Ownable.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n address private _owner;\n\n event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n /**\n * @dev Initializes the contract setting the deployer as the initial owner.\n */\n constructor() {\n _transferOwnership(_msgSender());\n }\n\n /**\n * @dev Throws if called by any account other than the owner.\n */\n modifier onlyOwner() {\n _checkOwner();\n _;\n }\n\n /**\n * @dev Returns the address of the current owner.\n */\n function owner() public view virtual returns (address) {\n return _owner;\n }\n\n /**\n * @dev Throws if the sender is not the owner.\n */\n function _checkOwner() internal view virtual {\n require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n }\n\n /**\n * @dev Leaves the contract without owner. It will not be possible to call\n * `onlyOwner` functions anymore. Can only be called by the current owner.\n *\n * NOTE: Renouncing ownership will leave the contract without an owner,\n * thereby removing any functionality that is only available to the owner.\n */\n function renounceOwnership() public virtual onlyOwner {\n _transferOwnership(address(0));\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Can only be called by the current owner.\n */\n function transferOwnership(address newOwner) public virtual onlyOwner {\n require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n _transferOwnership(newOwner);\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Internal function without access restriction.\n */\n function _transferOwnership(address newOwner) internal virtual {\n address oldOwner = _owner;\n _owner = newOwner;\n emit OwnershipTransferred(oldOwner, newOwner);\n }\n}\n" }, "@openzeppelin/contracts/security/Pausable.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which allows children to implement an emergency stop\n * mechanism that can be triggered by an authorized account.\n *\n * This module is used through inheritance. It will make available the\n * modifiers `whenNotPaused` and `whenPaused`, which can be applied to\n * the functions of your contract. Note that they will not be pausable by\n * simply including this module, only once the modifiers are put in place.\n */\nabstract contract Pausable is Context {\n /**\n * @dev Emitted when the pause is triggered by `account`.\n */\n event Paused(address account);\n\n /**\n * @dev Emitted when the pause is lifted by `account`.\n */\n event Unpaused(address account);\n\n bool private _paused;\n\n /**\n * @dev Initializes the contract in unpaused state.\n */\n constructor() {\n _paused = false;\n }\n\n /**\n * @dev Modifier to make a function callable only when the contract is not paused.\n *\n * Requirements:\n *\n * - The contract must not be paused.\n */\n modifier whenNotPaused() {\n _requireNotPaused();\n _;\n }\n\n /**\n * @dev Modifier to make a function callable only when the contract is paused.\n *\n * Requirements:\n *\n * - The contract must be paused.\n */\n modifier whenPaused() {\n _requirePaused();\n _;\n }\n\n /**\n * @dev Returns true if the contract is paused, and false otherwise.\n */\n function paused() public view virtual returns (bool) {\n return _paused;\n }\n\n /**\n * @dev Throws if the contract is paused.\n */\n function _requireNotPaused() internal view virtual {\n require(!paused(), \"Pausable: paused\");\n }\n\n /**\n * @dev Throws if the contract is not paused.\n */\n function _requirePaused() internal view virtual {\n require(paused(), \"Pausable: not paused\");\n }\n\n /**\n * @dev Triggers stopped state.\n *\n * Requirements:\n *\n * - The contract must not be paused.\n */\n function _pause() internal virtual whenNotPaused {\n _paused = true;\n emit Paused(_msgSender());\n }\n\n /**\n * @dev Returns to normal state.\n *\n * Requirements:\n *\n * - The contract must be paused.\n */\n function _unpause() internal virtual whenPaused {\n _paused = false;\n emit Unpaused(_msgSender());\n }\n}\n" }, "@openzeppelin/contracts/security/ReentrancyGuard.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Contract module that helps prevent reentrant calls to a function.\n *\n * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier\n * available, which can be applied to functions to make sure there are no nested\n * (reentrant) calls to them.\n *\n * Note that because there is a single `nonReentrant` guard, functions marked as\n * `nonReentrant` may not call one another. This can be worked around by making\n * those functions `private`, and then adding `external` `nonReentrant` entry\n * points to them.\n *\n * TIP: If you would like to learn more about reentrancy and alternative ways\n * to protect against it, check out our blog post\n * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].\n */\nabstract contract ReentrancyGuard {\n // Booleans are more expensive than uint256 or any type that takes up a full\n // word because each write operation emits an extra SLOAD to first read the\n // slot's contents, replace the bits taken up by the boolean, and then write\n // back. This is the compiler's defense against contract upgrades and\n // pointer aliasing, and it cannot be disabled.\n\n // The values being non-zero value makes deployment a bit more expensive,\n // but in exchange the refund on every call to nonReentrant will be lower in\n // amount. Since refunds are capped to a percentage of the total\n // transaction's gas, it is best to keep them low in cases like this one, to\n // increase the likelihood of the full refund coming into effect.\n uint256 private constant _NOT_ENTERED = 1;\n uint256 private constant _ENTERED = 2;\n\n uint256 private _status;\n\n constructor() {\n _status = _NOT_ENTERED;\n }\n\n /**\n * @dev Prevents a contract from calling itself, directly or indirectly.\n * Calling a `nonReentrant` function from another `nonReentrant`\n * function is not supported. It is possible to prevent this from happening\n * by making the `nonReentrant` function external, and making it call a\n * `private` function that does the actual work.\n */\n modifier nonReentrant() {\n // On the first call to nonReentrant, _notEntered will be true\n require(_status != _ENTERED, \"ReentrancyGuard: reentrant call\");\n\n // Any calls to nonReentrant after this point will fail\n _status = _ENTERED;\n\n _;\n\n // By storing the original value once again, a refund is triggered (see\n // https://eips.ethereum.org/EIPS/eip-2200)\n _status = _NOT_ENTERED;\n }\n}\n" }, "@openzeppelin/contracts/token/common/ERC2981.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (token/common/ERC2981.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../../interfaces/IERC2981.sol\";\nimport \"../../utils/introspection/ERC165.sol\";\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n *\n * _Available since v4.5._\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n struct RoyaltyInfo {\n address receiver;\n uint96 royaltyFraction;\n }\n\n RoyaltyInfo private _defaultRoyaltyInfo;\n mapping(uint256 => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n /**\n * @dev See {IERC165-supportsInterface}.\n */\n function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n }\n\n /**\n * @inheritdoc IERC2981\n */\n function royaltyInfo(uint256 _tokenId, uint256 _salePrice) public view virtual override returns (address, uint256) {\n RoyaltyInfo memory royalty = _tokenRoyaltyInfo[_tokenId];\n\n if (royalty.receiver == address(0)) {\n royalty = _defaultRoyaltyInfo;\n }\n\n uint256 royaltyAmount = (_salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n return (royalty.receiver, royaltyAmount);\n }\n\n /**\n * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n * override.\n */\n function _feeDenominator() internal pure virtual returns (uint96) {\n return 10000;\n }\n\n /**\n * @dev Sets the royalty information that all ids in this contract will default to.\n *\n * Requirements:\n *\n * - `receiver` cannot be the zero address.\n * - `feeNumerator` cannot be greater than the fee denominator.\n */\n function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n require(feeNumerator <= _feeDenominator(), \"ERC2981: royalty fee will exceed salePrice\");\n require(receiver != address(0), \"ERC2981: invalid receiver\");\n\n _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n }\n\n /**\n * @dev Removes default royalty information.\n */\n function _deleteDefaultRoyalty() internal virtual {\n delete _defaultRoyaltyInfo;\n }\n\n /**\n * @dev Sets the royalty information for a specific token id, overriding the global default.\n *\n * Requirements:\n *\n * - `receiver` cannot be the zero address.\n * - `feeNumerator` cannot be greater than the fee denominator.\n */\n function _setTokenRoyalty(\n uint256 tokenId,\n address receiver,\n uint96 feeNumerator\n ) internal virtual {\n require(feeNumerator <= _feeDenominator(), \"ERC2981: royalty fee will exceed salePrice\");\n require(receiver != address(0), \"ERC2981: Invalid parameters\");\n\n _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n }\n\n /**\n * @dev Resets royalty information for the token id back to the global default.\n */\n function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n delete _tokenRoyaltyInfo[tokenId];\n }\n}\n" }, "@openzeppelin/contracts/utils/Context.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n function _msgSender() internal view virtual returns (address) {\n return msg.sender;\n }\n\n function _msgData() internal view virtual returns (bytes calldata) {\n return msg.data;\n }\n}\n" }, "@openzeppelin/contracts/interfaces/IERC2981.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.6.0) (interfaces/IERC2981.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/introspection/IERC165.sol\";\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n *\n * _Available since v4.5._\n */\ninterface IERC2981 is IERC165 {\n /**\n * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n */\n function royaltyInfo(uint256 tokenId, uint256 salePrice)\n external\n view\n returns (address receiver, uint256 royaltyAmount);\n}\n" }, "@openzeppelin/contracts/utils/introspection/ERC165.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./IERC165.sol\";\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n * return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n *\n * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.\n */\nabstract contract ERC165 is IERC165 {\n /**\n * @dev See {IERC165-supportsInterface}.\n */\n function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n return interfaceId == type(IERC165).interfaceId;\n }\n}\n" }, "@openzeppelin/contracts/utils/Strings.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n bytes16 private constant _HEX_SYMBOLS = \"0123456789abcdef\";\n uint8 private constant _ADDRESS_LENGTH = 20;\n\n /**\n * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n */\n function toString(uint256 value) internal pure returns (string memory) {\n // Inspired by OraclizeAPI's implementation - MIT licence\n // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol\n\n if (value == 0) {\n return \"0\";\n }\n uint256 temp = value;\n uint256 digits;\n while (temp != 0) {\n digits++;\n temp /= 10;\n }\n bytes memory buffer = new bytes(digits);\n while (value != 0) {\n digits -= 1;\n buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));\n value /= 10;\n }\n return string(buffer);\n }\n\n /**\n * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n */\n function toHexString(uint256 value) internal pure returns (string memory) {\n if (value == 0) {\n return \"0x00\";\n }\n uint256 temp = value;\n uint256 length = 0;\n while (temp != 0) {\n length++;\n temp >>= 8;\n }\n return toHexString(value, length);\n }\n\n /**\n * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n */\n function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n bytes memory buffer = new bytes(2 * length + 2);\n buffer[0] = \"0\";\n buffer[1] = \"x\";\n for (uint256 i = 2 * length + 1; i > 1; --i) {\n buffer[i] = _HEX_SYMBOLS[value & 0xf];\n value >>= 4;\n }\n require(value == 0, \"Strings: hex length insufficient\");\n return string(buffer);\n }\n\n /**\n * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.\n */\n function toHexString(address addr) internal pure returns (string memory) {\n return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);\n }\n}\n" }, "erc721a/contracts/IERC721A.sol": { "content": "// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.2\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\n/**\n * @dev Interface of ERC721A.\n */\ninterface IERC721A {\n /**\n * The caller must own the token or be an approved operator.\n */\n error ApprovalCallerNotOwnerNorApproved();\n\n /**\n * The token does not exist.\n */\n error ApprovalQueryForNonexistentToken();\n\n /**\n * The caller cannot approve to their own address.\n */\n error ApproveToCaller();\n\n /**\n * Cannot query the balance for the zero address.\n */\n error BalanceQueryForZeroAddress();\n\n /**\n * Cannot mint to the zero address.\n */\n error MintToZeroAddress();\n\n /**\n * The quantity of tokens minted must be more than zero.\n */\n error MintZeroQuantity();\n\n /**\n * The token does not exist.\n */\n error OwnerQueryForNonexistentToken();\n\n /**\n * The caller must own the token or be an approved operator.\n */\n error TransferCallerNotOwnerNorApproved();\n\n /**\n * The token must be owned by `from`.\n */\n error TransferFromIncorrectOwner();\n\n /**\n * Cannot safely transfer to a contract that does not implement the\n * ERC721Receiver interface.\n */\n error TransferToNonERC721ReceiverImplementer();\n\n /**\n * Cannot transfer to the zero address.\n */\n error TransferToZeroAddress();\n\n /**\n * The token does not exist.\n */\n error URIQueryForNonexistentToken();\n\n /**\n * The `quantity` minted with ERC2309 exceeds the safety limit.\n */\n error MintERC2309QuantityExceedsLimit();\n\n /**\n * The `extraData` cannot be set on an unintialized ownership slot.\n */\n error OwnershipNotInitializedForExtraData();\n\n // =============================================================\n // STRUCTS\n // =============================================================\n\n struct TokenOwnership {\n // The address of the owner.\n address addr;\n // Stores the start time of ownership with minimal overhead for tokenomics.\n uint64 startTimestamp;\n // Whether the token has been burned.\n bool burned;\n // Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.\n uint24 extraData;\n }\n\n // =============================================================\n // TOKEN COUNTERS\n // =============================================================\n\n /**\n * @dev Returns the total number of tokens in existence.\n * Burned tokens will reduce the count.\n * To get the total number of tokens minted, please see {_totalMinted}.\n */\n function totalSupply() external view returns (uint256);\n\n // =============================================================\n // IERC165\n // =============================================================\n\n /**\n * @dev Returns true if this contract implements the interface defined by\n * `interfaceId`. See the corresponding\n * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)\n * to learn more about how these ids are created.\n *\n * This function call must use less than 30000 gas.\n */\n function supportsInterface(bytes4 interfaceId) external view returns (bool);\n\n // =============================================================\n // IERC721\n // =============================================================\n\n /**\n * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n */\n event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n /**\n * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n */\n event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n /**\n * @dev Emitted when `owner` enables or disables\n * (`approved`) `operator` to manage all of its assets.\n */\n event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n /**\n * @dev Returns the number of tokens in `owner`'s account.\n */\n function balanceOf(address owner) external view returns (uint256 balance);\n\n /**\n * @dev Returns the owner of the `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function ownerOf(uint256 tokenId) external view returns (address owner);\n\n /**\n * @dev Safely transfers `tokenId` token from `from` to `to`,\n * checking first that contract recipients are aware of the ERC721 protocol\n * to prevent tokens from being forever locked.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must exist and be owned by `from`.\n * - If the caller is not `from`, it must be have been allowed to move\n * this token by either {approve} or {setApprovalForAll}.\n * - If `to` refers to a smart contract, it must implement\n * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n *\n * Emits a {Transfer} event.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId,\n bytes calldata data\n ) external;\n\n /**\n * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId\n ) external;\n\n /**\n * @dev Transfers `tokenId` from `from` to `to`.\n *\n * WARNING: Usage of this method is discouraged, use {safeTransferFrom}\n * whenever possible.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must be owned by `from`.\n * - If the caller is not `from`, it must be approved to move this token\n * by either {approve} or {setApprovalForAll}.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(\n address from,\n address to,\n uint256 tokenId\n ) external;\n\n /**\n * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n * The approval is cleared when the token is transferred.\n *\n * Only a single account can be approved at a time, so approving the\n * zero address clears previous approvals.\n *\n * Requirements:\n *\n * - The caller must own the token or be an approved operator.\n * - `tokenId` must exist.\n *\n * Emits an {Approval} event.\n */\n function approve(address to, uint256 tokenId) external;\n\n /**\n * @dev Approve or remove `operator` as an operator for the caller.\n * Operators can call {transferFrom} or {safeTransferFrom}\n * for any token owned by the caller.\n *\n * Requirements:\n *\n * - The `operator` cannot be the caller.\n *\n * Emits an {ApprovalForAll} event.\n */\n function setApprovalForAll(address operator, bool _approved) external;\n\n /**\n * @dev Returns the account approved for `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function getApproved(uint256 tokenId) external view returns (address operator);\n\n /**\n * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n *\n * See {setApprovalForAll}.\n */\n function isApprovedForAll(address owner, address operator) external view returns (bool);\n\n // =============================================================\n // IERC721Metadata\n // =============================================================\n\n /**\n * @dev Returns the token collection name.\n */\n function name() external view returns (string memory);\n\n /**\n * @dev Returns the token collection symbol.\n */\n function symbol() external view returns (string memory);\n\n /**\n * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n */\n function tokenURI(uint256 tokenId) external view returns (string memory);\n\n // =============================================================\n // IERC2309\n // =============================================================\n\n /**\n * @dev Emitted when tokens in `fromTokenId` to `toTokenId`\n * (inclusive) is transferred from `from` to `to`, as defined in the\n * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.\n *\n * See {_mintERC2309} for more details.\n */\n event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);\n}\n" }, "erc721a/contracts/extensions/IERC4907A.sol": { "content": "// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.2\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\nimport '../IERC721A.sol';\n\n/**\n * @dev Interface of ERC4907A.\n */\ninterface IERC4907A is IERC721A {\n /**\n * The caller must own the token or be an approved operator.\n */\n error SetUserCallerNotOwnerNorApproved();\n\n /**\n * @dev Emitted when the `user` of an NFT or the `expires` of the `user` is changed.\n * The zero address for user indicates that there is no user address.\n */\n event UpdateUser(uint256 indexed tokenId, address indexed user, uint64 expires);\n\n /**\n * @dev Sets the `user` and `expires` for `tokenId`.\n * The zero address indicates there is no user.\n *\n * Requirements:\n *\n * - The caller must own `tokenId` or be an approved operator.\n */\n function setUser(\n uint256 tokenId,\n address user,\n uint64 expires\n ) external;\n\n /**\n * @dev Returns the user address for `tokenId`.\n * The zero address indicates that there is no user or if the user is expired.\n */\n function userOf(uint256 tokenId) external view returns (address);\n\n /**\n * @dev Returns the user's expires of `tokenId`.\n */\n function userExpires(uint256 tokenId) external view returns (uint256);\n}\n" }, "erc721a/contracts/extensions/IERC721AQueryable.sol": { "content": "// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.2\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\nimport '../IERC721A.sol';\n\n/**\n * @dev Interface of ERC721AQueryable.\n */\ninterface IERC721AQueryable is IERC721A {\n /**\n * Invalid query range (`start` >= `stop`).\n */\n error InvalidQueryRange();\n\n /**\n * @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.\n *\n * If the `tokenId` is out of bounds:\n *\n * - `addr = address(0)`\n * - `startTimestamp = 0`\n * - `burned = false`\n * - `extraData = 0`\n *\n * If the `tokenId` is burned:\n *\n * - `addr =
`\n * - `startTimestamp = `\n * - `burned = true`\n * - `extraData = `\n *\n * Otherwise:\n *\n * - `addr =
`\n * - `startTimestamp = `\n * - `burned = false`\n * - `extraData = `\n */\n function explicitOwnershipOf(uint256 tokenId) external view returns (TokenOwnership memory);\n\n /**\n * @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.\n * See {ERC721AQueryable-explicitOwnershipOf}\n */\n function explicitOwnershipsOf(uint256[] memory tokenIds) external view returns (TokenOwnership[] memory);\n\n /**\n * @dev Returns an array of token IDs owned by `owner`,\n * in the range [`start`, `stop`)\n * (i.e. `start <= tokenId < stop`).\n *\n * This function allows for tokens to be queried if the collection\n * grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.\n *\n * Requirements:\n *\n * - `start < stop`\n */\n function tokensOfOwnerIn(\n address owner,\n uint256 start,\n uint256 stop\n ) external view returns (uint256[] memory);\n\n /**\n * @dev Returns an array of token IDs owned by `owner`.\n *\n * This function scans the ownership mapping and is O(`totalSupply`) in complexity.\n * It is meant to be called off-chain.\n *\n * See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into\n * multiple smaller scans if the collection is large enough to cause\n * an out-of-gas error (10K collections should be fine).\n */\n function tokensOfOwner(address owner) external view returns (uint256[] memory);\n}\n" }, "@openzeppelin/contracts/utils/introspection/IERC165.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n /**\n * @dev Returns true if this contract implements the interface defined by\n * `interfaceId`. See the corresponding\n * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n * to learn more about how these ids are created.\n *\n * This function call must use less than 30 000 gas.\n */\n function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n" } }, "settings": { "optimizer": { "runs": 200, "enabled": true }, "outputSelection": { "*": { "*": [ "evm.bytecode", "evm.deployedBytecode", "devdoc", "userdoc", "metadata", "abi" ] } } } }