Daily Papers

A new type of cooperativity termed temporal cooperativity [Biophys. Chem. 105 585-593 (2003), Annu. Rev. Phys. Chem. 58 113-142 (2007)], emerges in the signal transduction module of phosphorylation-dephosphorylation cycle (PdPC). It utilizes multiple kinetic cycles in time, in contrast to allosteric cooperativity that utilizes multiple subunits in a protein. In the present paper, we thoroughly investigate both the deterministic (microscopic) and stochastic (mesoscopic) models, and focus on the identification of the source of temporal cooperativity via comparing with allosteric cooperativity. A thermodynamic analysis confirms again the claim that the chemical equilibrium state exists if and only if the phosphorylation potential triangle G=0, in which case the amplification of sensitivity is completely abolished. Then we provide comprehensive theoretical and numerical analysis with the first-order and zero-order assumptions in phosphorylation-dephosphorylation cycle respectively. Furthermore, it is interestingly found that the underlying mathematics of temporal cooperativity and allosteric cooperativity are equivalent, and both of them can be expressed by "dissociation constants", which also characterizes the essential differences between the simple and ultrasensitive PdPC switches. Nevertheless, the degree of allosteric cooperativity is restricted by the total number of sites in a single enzyme molecule which can not be freely regulated, while temporal cooperativity is only restricted by the total number of molecules of the target protein which can be regulated in a wide range and gives rise to the ultrasensitivity phenomenon.

In 2000, Gillespie rehabilitated the chemical Langevin equation (CLE) by describing two conditions that must be satisfied for it yield a valid approximation of the chemical master equation (CME). In this work, we construct an original path integral description of the CME, and show how applying Gillespie's two conditions to it directly leads to a path integral equivalent to the CLE. We compare this approach to the path integral equivalent of a large system size derivation, and show that they are qualitatively different. In particular, both approaches involve converting many sums into many integrals, and the difference between the two methods is essentially the difference between using the Euler-Maclaurin formula and using Riemann sums. Our results shed light on how path integrals can be used to conceptualize coarse-graining biochemical systems, and are readily generalizable.

Applying the method of moments to the chemical master equation (CME) appearing in stochastic chemical kinetics often leads to the so-called closure problem. Recently, several authors showed that this problem can be partially overcome using moment-based semidefinite programs (SDPs). In particular, they showed that moment-based SDPs can be used to calculate rigorous bounds on various descriptions of the stochastic chemical kinetic system's stationary distribution(s) -- for example, mean molecular counts, variances in these counts, and so on. In this paper, we show that these ideas can be extended to the corresponding dynamic problem, calculating time-varying bounds on the same descriptions.

Approximations based on moment-closure (MA) are commonly used to obtain estimates of the mean molecule numbers and of the variance of fluctuations in the number of molecules of chemical systems. The advantage of this approach is that it can be far less computationally expensive than exact stochastic simulations of the chemical master equation. Here we numerically study the conditions under which the MA equations yield results reflecting the true stochastic dynamics of the system. We show that for bistable and oscillatory chemical systems with deterministic initial conditions, the solution of the MA equations can be interpreted as a valid approximation to the true moments of the CME, only when the steady-state mean molecule numbers obtained from the chemical master equation fall within a certain finite range. The same validity criterion for monostable systems implies that the steady-state mean molecule numbers obtained from the chemical master equation must be above a certain threshold. For mean molecule numbers outside of this range of validity, the MA equations lead to either qualitatively wrong oscillatory dynamics or to unphysical predictions such as negative variances in the molecule numbers or multiple steady-state moments of the stationary distribution as the initial conditions are varied. Our results clarify the range of validity of the MA approach and show that pitfalls in the interpretation of the results can only be overcome through the systematic comparison of the solutions of the MA equations of a certain order with those of higher orders.

Classical theories of chemical kinetics assume independent reactions in dilute solutions, whose rates are determined by mean concentrations. In condensed matter, strong interactions alter chemical activities and create inhomogeneities that can dramatically affect the reaction rate. The extreme case is that of a reaction coupled to a phase transformation, whose kinetics must depend on the order parameter -- and its gradients, at phase boundaries. This Account presents a general theory of chemical kinetics based on nonequilibrium thermodynamics. The reaction rate is a nonlinear function of the thermodynamic driving force (free energy of reaction) expressed in terms of variational chemical potentials. The Cahn-Hilliard and Allen-Cahn equations are unified and extended via a master equation for non-equilibrium chemical thermodynamics. For electrochemistry, both Marcus and Butler-Volmer kinetics are generalized for concentrated solutions and ionic solids. The theory is applied to intercalation dynamics in the phase separating Li-ion battery material Li_xFePO_4.

All known up to now models of chemical oscillations are based exclusively on kinetic considerations. The chemical gross-process equation is split usually by elementary steps, each step is supplied by an arrow and a differential equation, joint solution to such a construction under certain, often ad hoc chosen conditions and with ad hoc numerical coefficients leads to chemical oscillations. Kinetic perception of chemical oscillations reigns without exclusions. However, as it was recently shown by the author for the laser and for the electrochemical systems, chemical oscillations follow also from solutions to the basic expressions of discrete thermodynamics of chemical equilibria. Graphically those solutions are various fork bifurcation diagrams, and, in certain types of chemical systems, oscillations are well pronounced in the bistable bifurcation areas. In this work we describe a general thermodynamic approach to chemical oscillations as opposite to kinetic models, and depict some of their new features like spontaneity and fractality. The paper doubts exclusivity of the kinetic approach to chemical oscillations, and its aim is to discuss and exemplify thermodynamically predicted chemical oscillations in closed chemical systems.

Chemical reaction networks can undergo nonequilibrium phase transitions upon variation of external control parameters like the chemical potential of a species. We investigate the flux in the associated chemostats that is proportional to the entropy production and its critical fluctuations within the Schlögl model. Numerical simulations show that the corresponding diffusion coefficient diverges at the critical point as a function of system size. In the vicinity of the critical point, the diffusion coefficient follows a scaling form. We develop an analytical approach based on the chemical Langevin equation and van Kampen's system size expansion that yields the corresponding exponents in the monostable regime. In the bistable regime, we rely on a two-state approximation in order to analytically describe the critical behavior.

Macroscopic entropy production σ^{(tot)} in the general nonlinear isothermal chemical reaction system with mass action kinetics is decomposed into a free energy dissipation and a house-keeping heat: σ^{(tot)}=σ^{(fd)}+σ^{(hk)}; σ^{(fd)}=-rd A/rd t, where A is a generalized free energy function. This yields a novel nonequilibrium free energy balance equation rd A/rd t=-σ^{(tot)}+σ^{(hk)}, which is on a par with celebrated entropy balance equation rd S/rd t=σ^{(tot)}+η^{(ex)} where η^{(ex)} is the rate of entropy exchange with the environment.For kinetic systems with complex balance, σ^{(fd)} and σ^{(hk)} are the macroscopic limits of stochastic free energy dissipation and house-keeping heat, which are both nonnegative, in the Delbrück-Gillespie description of the stochastic chemical kinetics.Therefore, we show that a full kinetic and thermodynamic theory of chemical reaction systems that transcends mesoscopic and macroscopic levels emerges.

In this paper, a mathematical model is developed to describe the evolution of the concentration of compounds through a gas chromatography column. The model couples mass balances and kinetic equations for all components. Both single and multiple-component cases are considered with constant or variable velocity. Non-dimensionalisation indicates the small effect of diffusion. The system where diffusion is neglected is analysed using Laplace transforms. In the multiple-component case, it is demonstrated that the competition between the compounds is negligible and the equations may be decoupled. This reduces the problem to solving a single integral equation to determine the concentration profile for all components (since they are scaled versions of each other). For a given analyte, we then only two parameters need to be fitted to the data. To verify this approach, the full governing equations are also solved numerically using the finite difference method and a global adaptive quadrature method to integrate the Laplace transformation. Comparison with the Laplace solution verifies the high degree of accuracy of the simpler Laplace form. The Laplace solution is then verified against experimental data from BTEX chromatography. This novel method, which involves solving a single equation and fitting parameters in pairs for individual components, is highly efficient. It is significantly faster and simpler than the full numerical solution and avoids the computationally expensive methods that would normally be used to fit all curves at the same time.

Many examples of cooperation exist in biology. In chemical systems however, which can sometimes be quite complex, we do not appear to observe intricate cooperative interactions. A key question for the origin of life, is then how can molecular cooperation first arise in an abiotic system prior to the emergence of biological replication. We postulate that selection at the molecular level is a driving force behind the complexification of chemical systems, particularly during the origins of life. In the theory of multilevel selection the two selective forces are: within-group and between-group, where the former tends to favor "selfish" replication of individuals and the latter favor cooperation between individuals enhancing the replication of the group as a whole. These forces can be quantified using the Price equation, which is a standard tool used in evolutionary biology to quantify evolutionary change. Our central claim is that replication and heredity in chemical systems are subject to selection, and quantifiable using the multilevel Price equation. We demonstrate this using the Graded Autocatalysis Replication Domain computer model, describing simple protocell composed out of molecules and its replication, which respectively analogue to the group and the individuals. In contrast to previous treatments of this model, we treat the lipid molecules themselves as replicating individuals and the protocells they form as groups of individuals. Our goal is to demonstrate how evolutionary biology tools and concepts can be applied in chemistry and we suggest that molecular cooperation may arise as a result of group selection. Further, the biological relation of parent-progeny is proposed to be analogue to the reactant-product relation in chemistry, thus allowing for tools from evolutionary biology to be applied to chemistry and would deepen the connection between chemistry and biology.

We study an autonomous model of a Maxwell demon that works by rectifying thermal fluctuations of chemical reactions. It constitutes the chemical analog of a recently studied electronic demon. We characterize its scaling behavior in the macroscopic limit, its performances, and the impact of potential internal delays. We obtain analytical expressions for all quantities of interest, namely, the generated reverse chemical current, the output power, the transduction efficiency, and the correlations between the numbers of molecules. Due to a bound on the nonequilibrium response of its chemical reaction network, we find that, contrary to the electronic case, there is no way for the Maxwell demon to generate a finite output in the macroscopic limit. Finally, we analyze the information thermodynamics of the Maxwell demon from a bipartite perspective. In the limit of a fast demon, the information flow is obtained, its pattern in the state space is discussed, and the behavior of the partial efficiencies related to the measurement and the feedback processes is examined.

Can a micron sized sack of interacting molecules understand, and adapt to a constantly-fluctuating environment? Cellular life provides an existence proof in the affirmative, but the principles that allow for life's existence are far from being proven. One challenge in engineering and understanding biochemical computation is the intrinsic noise due to chemical fluctuations. In this paper, we draw insights from machine learning theory, chemical reaction network theory, and statistical physics to show that the broad and biologically relevant class of detailed balanced chemical reaction networks is capable of representing and conditioning complex distributions. These results illustrate how a biochemical computer can use intrinsic chemical noise to perform complex computations. Furthermore, we use our explicit physical model to derive thermodynamic costs of inference.

The principle of detailed balance states that in equilibrium each elementary process is equilibrated by its reverse process. For many real physico-chemical complex systems (e.g. homogeneous combustion, heterogeneous catalytic oxidation, most enzyme reactions etc), detailed mechanisms include both reversible and irreversible reactions. In this case, the principle of detailed balance cannot be applied directly. We represent irreversible reactions as limits of reversible steps and obtain the principle of detailed balance for complex mechanisms with some irreversible elementary processes. We proved two consequences of the detailed balance for these mechanisms: the structural condition and the algebraic condition that form together the extended form of detailed balance. The algebraic condition is the principle of detailed balance for the reversible part. The structural condition is: the convex hull of the stoichiometric vectors of the irreversible reactions has empty intersection with the linear span of the stoichiometric vectors of the reversible reaction. Physically, this means that the irreversible reactions cannot be included in oriented pathways. The systems with the extended form of detailed balance are also the limits of the reversible systems with detailed balance when some of the equilibrium concentrations (or activities) tend to zero. Surprisingly, the structure of the limit reaction mechanism crucially depends on the relative speeds of this tendency to zero.

The study demonstrates the capabilities of a vector-based approach for calculating stoichiometric coefficients in chemical equations, using black powder as an illustrative example. A method is proposed for selecting and constraining intermediate interactions between reactants, as well as for identifying final products. It is shown that even a small number of components can lead to a large number of final and intermediate products. Through concrete calculations, a correlation is established between the number of possible chemical equations and the number of reactants. A methodology is proposed for computing all possible chemical equations within a reaction system for arbitrary component ratios, enabling the derivation of all feasible chemical reactions. Additionally, a method is developed for calculating the chemical composition for a fixed set of reactants, allowing for the evaluation of the set of products resulting from all possible chemical interactions given a specified initial composition.

The paper sets forth comprehensive basics of Discrete Thermodynamics of Chemical Equilibria (DTD), developed by the author during the last decade and spread over series of publications. Based on the linear equations of irreversible thermodynamics, De Donder's definition of the thermodynamic force, and the Le Chatelier principle, DTD brings forward a notion of chemical equilibrium as a balance of internal and external thermodynamic forces, acting against a chemical system. The basic expression of DTD is a logistic map that ties together energetic characteristics of the chemical transformation in the system, its deviation from true thermodynamic equilibrium, and the sum of thermodynamic forces, causing that deviation. System deviation from thermodynamic equilibrium is the major variable of the theory. Solutions to the basic map define the chemical system domain of states comprising bifurcation diagrams with four areas, from true thermodynamic equilibrium to chaos, having specific distinctive meaning for chemical systems. The theory is derived from the currently recognized ideas of chemical thermodynamics and binds classical and contemporary thermodynamics of chemical equilibria into a unique concept. DTD opens new opportunities in understanding and analysis of equilibria in chemical systems. Some new results, included in the paper, have never been published before.

We investigate the fidelity of Grover's search algorithm by implementing it on an open quantum system. In particular, we study with what accuracy one can estimate that the algorithm would deliver the searched state. In reality, every system has some influence of its environment. We include the environmental effects on the system dynamics by using a recently reported fluctuation-regulated quantum master equation (FRQME). The FRQME indicates that in addition to the regular relaxation due to system-environment coupling, the applied drive also causes dissipation in the system dynamics. As a result, the fidelity is found to depend on both the drive-induced dissipative terms and the relaxation terms and we find that there exists a competition between them, leading to an optimum value of the drive amplitude for which the fidelity becomes maximum. For efficient implementation of the search algorithm, precise knowledge of this optimum drive amplitude is essential.

We discuss the use of tunneling electron current to control and catalyze chemical reactions. Assuming the separation of time scales for electronic and nuclear dynamics we employ the Langevin equation for the reaction coordinate. The Langevin equation contains current-induced forces and is used to define nonequilibrium, effective potential energy surface for current-carrying molecular systems. The current-induced forces are computed via Keldysh nonequilibrium Green's functions. Once the nonequilibrium, current-depended potential energy surface is defined, the chemical reaction is modeled as an escape of a Brownian particle from the potential well. We demonstrate that the barrier between the reactant and the product states can be controlled by the bias voltage. When the molecule is asymmetrically coupled to the electrodes, the reaction can be catalyzed or stopped depending on the polarity of the tunneling current.

Chemical transport models (CTMs), which simulate air pollution transport, transformation, and removal, are computationally expensive, largely because of the computational intensity of the chemical mechanisms: systems of coupled differential equations representing atmospheric chemistry. Here we investigate the potential for machine learning to reproduce the behavior of a chemical mechanism, yet with reduced computational expense. We create a 17-layer residual multi-target regression neural network to emulate the Carbon Bond Mechanism Z (CBM-Z) gas-phase chemical mechanism. We train the network to match CBM-Z predictions of changes in concentrations of 77 chemical species after one hour, given a range of chemical and meteorological input conditions, which it is able to do with root-mean-square error (RMSE) of less than 1.97 ppb (median RMSE = 0.02 ppb), while achieving a 250x computational speedup. An additional 17x speedup (total 4250x speedup) is achieved by running the neural network on a graphics-processing unit (GPU). The neural network is able to reproduce the emergent behavior of the chemical system over diurnal cycles using Euler integration, but additional work is needed to constrain the propagation of errors as simulation time progresses.

We show how to extract from a sufficiently long time series of stationary fluctuations of chemical reactions an estimate of the entropy production. This method, which is based on recent work on fluctuation theorems, is direct, non-invasive, does not require any knowledge about the underlying dynamics, and is applicable even when only partial information is available. We apply it to simple stochastic models of chemical reactions involving a finite number of states, and for this case, we study how the estimate of dissipation is affected by the degree of coarse-graining present in the input data.

We present an escape rate theory for current-induced chemical reactions. We use Keldysh nonequilibrium Green's functions to derive a Langevin equation for the reaction coordinate. Due to the out of equilibrium electronic degrees of freedom, the friction, noise, and effective temperature in the Langevin equation depend locally on the reaction coordinate. As an example, we consider the dissociation of diatomic molecules induced by the electronic current from a scanning tunnelling microscope tip. In the resonant tunnelling regime, the molecular dissociation involves two processes which are intricately interconnected: a modification of the potential energy barrier and heating of the molecule. The decrease of the molecular barrier (i.e. the current induced catalytic reduction of the barrier) accompanied by the appearance of the effective, reaction-coordinate-dependent temperature is an alternative mechanism for current-induced chemical reactions, which is distinctly different from the usual paradigm of pumping vibrational degrees of freedom.

A path-integral approach to quantum acoustics is developed here. In contrast to the commonly utilized particle perspective, this emerging field brings forth a long neglected but essential wave paradigm for lattice vibrations. Within the coherent state picture, we formulate a non-Markovian, stochastic master equation that captures the exact dynamics of any system with coupling linear in the bath coordinates and nonlinear in the system coordinates. We further demonstrate the capability of the presented master equation by applying the corresponding procedure to the eminent Fr\"ohlich model. In general, we establish a solid foundation for quantum acoustics as a kindred framework to quantum optics, while paving the way for deeper first-principle explorations of non-perturbative system dynamics driven by lattice vibrations.

We provide a concise framework for generalized ensemble theory through a matrix-based approach. By introducing an observation matrix, any discrete probability distribution, including those for non-equilibrium steady states, can be expressed as a generalized Boltzmann distribution, with observables and conjugate variables as the basis and coordinates in a linear space. In this framework, we identify the minimal sufficient statistics required for inferring the Boltzmann distribution. Furthermore, we show that the Hadamard and Vandermonde matrices are suitable observation matrices for spin systems and random walks. In master equation systems, the probability flux observation matrix facilitates the identification of detailed balance violations. Our findings provide a new approach to developing generalized ensemble theory for non-equilibrium steady-state systems.

This chapter provides a pedagogical introduction and overview of spatial and temporal correlation and fluctuation effects resulting from the fundamentally stochastic kinetics underlying chemical reactions and the dynamics of populations or epidemics. After reviewing the assumptions and mean-field type approximations involved in the construction of chemical rate equations for uniform reactant densities, we first discuss spatial clustering in birth-death systems, where non-linearities are introduced through either density-limiting pair reactions, or equivalently via local imposition of finite carrying capacities. The competition of offspring production, death, and non-linear inhibition induces a population extinction threshold, which represents a non-equilibrium phase transition that separates active from absorbing states. This continuous transition is characterized by the universal scaling exponents of critical directed percolation clusters. Next we focus on the emergence of depletion zones in single-species annihilation processes and spatial population segregation with the associated reaction fronts in two-species pair annihilation. These strong (anti-)correlation effects are dynamically generated by the underlying stochastic kinetics. Finally, we address noise-induced and fluctuation-stabilized spatio-temporal patterns in basic predator-prey systems, exemplified by spreading activity fronts in the two-species Lotka-Volterra model as well as spiral structures in the May-Leonard variant of cyclically competing three-species systems akin to rock-paper-scissors games.

We present a vector-based method to balance chemical reactions. The algorithm builds candidates in a deterministic way, removes duplicates, and always prints coefficients in the lowest whole-number form. For redox cases, electrons and protons/hydroxide are treated explicitly, so both mass and charge are balanced. We also outline the basic principles of the vector formulation of stoichiometry, interpreting reactions as integer vectors in composition space, this geometric view supports compact visualizations of reagent-product interactions and helps surface distinct reaction families. The method enumerates valid balances for arbitrary user-specified species lists without special-case balancing rules or symbolic tricks, and it provides a clean foundation for developing new algorithmic variants (e.g., alternative objectives or constraints). On representative examples (neutralization, double displacement, decomposition, classical redox, small multicomponent sets) and a negative control, the method produced correct integer balances. When multiple balances exist, we report a canonical one - minimizing the total coefficient sum with a simple tie-breaker - without claiming global optimality beyond the solutions the search enumerates. The procedure applies per reaction and extends to reaction networks via consistent per-reaction application. We do not report runtimes, broader benchmarking and code/data release are planned.

Central to our understanding of chemical reactivity is the principle of mass conservation, which is fundamental for ensuring physical consistency, balancing equations, and guiding reaction design. However, data-driven computational models for tasks such as reaction product prediction rarely abide by this most basic constraint. In this work, we recast the problem of reaction prediction as a problem of electron redistribution using the modern deep generative framework of flow matching. Our model, FlowER, overcomes limitations inherent in previous approaches by enforcing exact mass conservation, thereby resolving hallucinatory failure modes, recovering mechanistic reaction sequences for unseen substrate scaffolds, and generalizing effectively to out-of-domain reaction classes with extremely data-efficient fine-tuning. FlowER additionally enables estimation of thermodynamic or kinetic feasibility and manifests a degree of chemical intuition in reaction prediction tasks. This inherently interpretable framework represents a significant step in bridging the gap between predictive accuracy and mechanistic understanding in data-driven reaction outcome prediction.

Artificial intelligence is reshaping scientific exploration, but most methods automate procedural tasks without engaging in scientific reasoning, limiting autonomy in discovery. We introduce Materials Agents for Simulation and Theory in Electronic-structure Reasoning (MASTER), an active learning framework where large language models autonomously design, execute, and interpret atomistic simulations. In MASTER, a multimodal system translates natural language into density functional theory workflows, while higher-level reasoning agents guide discovery through a hierarchy of strategies, including a single agent baseline and three multi-agent approaches: peer review, triage-ranking, and triage-forms. Across two chemical applications, CO adsorption on Cu-surface transition metal (M) adatoms and on M-N-C catalysts, reasoning-driven exploration reduces required atomistic simulations by up to 90% relative to trial-and-error selection. Reasoning trajectories reveal chemically grounded decisions that cannot be explained by stochastic sampling or semantic bias. Altogether, multi-agent collaboration accelerates materials discovery and marks a new paradigm for autonomous scientific exploration.

We analyze a class of cell-bulk coupled PDE-ODE models, motivated by quorum and diffusion sensing phenomena in microbial systems, that characterize communication between localized spatially segregated dynamically active signaling compartments that have a permeable boundary. Each cell secretes a signaling chemical into the bulk region at a constant rate and receives a feedback of the bulk chemical from the entire collection of cells. This global feedback, which activates signaling pathways within the cells, modifies the intracellular dynamics according to the external environment. The cell secretion and global feedback are regulated by permeability parameters across the cell membrane. For arbitrary reaction-kinetics within each cell, the method of matched asymptotic expansions is used in the limit of small cell radius to construct steady-state solutions of the PDE-ODE model, and to derive a globally coupled nonlinear matrix eigenvalue problem (GCEP) that characterizes the linear stability properties of the steady-states. In the limit of large bulk diffusivity an asymptotic analysis of the PDE-ODE model leads to a limiting ODE system for the spatial average of the concentration in the bulk region that is coupled to the intracellular dynamics within the cells. Results from the linear stability theory and ODE dynamics are illustrated for Sel'kov reaction-kinetics, where the kinetic parameters are chosen so that each cell is quiescent when uncoupled from the bulk medium. For various specific spatial configurations of cells, the linear stability theory is used to construct phase diagrams in parameter space characterizing where a switch-like emergence of intracellular oscillations can occur through a Hopf bifurcation.

The paper has two goals: It presents basic ideas, notions, and methods for reduction of reaction kinetics models: quasi-steady-state, quasi-equilibrium, slow invariant manifolds, and limiting steps. It describes briefly the current state of the art and some latest achievements in the broad area of model reduction in chemical and biochemical kinetics, including new results in methods of invariant manifolds, computation singular perturbation, bottleneck methods, asymptotology, tropical equilibration, and reaction mechanism skeletonisation.

A theoretical approach to describing transport of an entire ensemble of clusters with different sizes as a single species in gas has been developed. The major assumption is an existence of local partial chemical equilibrium between the clusters. It is shown that thermal diffusion emerges in the collective description as a significant factor even if it is negligible when transport of the original molecular species is considered. Analytical expressions for the effective diffusion and thermal diffusion coefficients at temperature, pressure, and chemical composition gradients have been derived. The theory has been applied to a technology of H2S conversion in a centrifugal plasma-chemical reactor and has made it possible to account for sulfur clusters in numerical process modeling.

We theoretically identify the noise-induced coherent contribution to the ergotropy of a four-level quantum heat engine coupled to a unimodal quantum cavity. We utilize a protocol where the passive state's quasiprobabilities can be analytically identified from the population-coherence coupled reduced density matrix. The reduced density matrix elements are evaluated using a microscopic quantum master equation formalism. Multiple ergotropies within the same coherence interval, each characterized by a positive and pronounced coherent contribution, are observed. These ergotropies are a result of population inversion as well as quasiprobability-population inversion, controllable through the coherence measure parameters. The optimal flux and power of the engine are found to be at moderate values of ergotropy with increasing values of noise-induced coherence. The optimal power at different coherences is found to possess a constant ergotropy.

The Mean Spherical Approximation (MSA) is a commonly-used thermodynamic theory for computing the energetics of ions in the primitive model (i.e., charged hard-sphere ions in a background dielectric). For the excess chemical potential, however, the early MSA formulations (which were widely adopted) only included the terms needed to compute the mean excess chemical potential (or the mean activity coefficient). Other terms for the chemical potential μ_i of individual species i were not included because they sum to 0 in the mean chemical potential. Here, we derive these terms to give a complete MSA formulation of the chemical potential. The result is a simple additive term for μ_i that we show is a qualitative improvement over the previous MSA version. In addition, our derivation shows that the MSA's assumption of global charge neutrality is not strictly necessary, so that the MSA is also valid for systems close to neutrality.

The two-body problem of variational electrodynamics possesses differential-delay equations of motion with state-dependent delays of neutral type and solutions that can have velocity discontinuities on countable sets. From a periodic orbit possessing some mild properties at breaking points, we define a synchronization function in R x R3, which is further used to construct two bounded oscillatory functions vanishing at breaking points and whose first derivatives are continuous and defined everywhere but at breaking points. The oscillatory functions are associated with a PDE identity in H2(R3), and we postulate ordering conditions for the PDE identity to define a Fredholm-Schroedinger operator with an O(1/r2) spin-orbit forcing term belonging to L2(R3). As an application, we introduce the Chemical Principle criterion to select orbits with asymptotically vanishing far-fields and estimate the Bohr radius parameter of the Fredholm-Schroedinger PDE using the boundary-layer of orbits chosen according to the Chemical Principle criterion. Last, working backward, we derive a Chemical Principle-like condition from the ordering conditions.

The statistical mechanics of Gibbs is a juxtaposition of subjective, probabilistic ideas on the one hand and objective, mechanical ideas on the other. In this paper, we follow the path set out by Jaynes, including elements added subsequently to that original work, to explore the consequences of the purely statistical point of view. We show how standard methods in the equilibrium theory could have been derived simply from a description of the available problem information. In addition, our presentation leads to novel insights into questions associated with symmetry and non-equilibrium statistical mechanics. Two surprising consequences to be explored in further work are that (in)distinguishability factors are automatically predicted from the problem formulation and that a quantity related to the thermodynamic entropy production is found by considering information loss in non-equilibrium processes. Using the problem of ion channel thermodynamics as an example, we illustrate the idea of building up complexity by successively adding information to create progressively more complex descriptions of a physical system. Our result is that such statistical mechanical descriptions can be used to create transparent, computable, experimentally-relevant models that may be informed by more detailed atomistic simulations. We also derive a theory for the kinetic behavior of this system, identifying the nonequilibrium `process' free energy functional. The Gibbs relation for this functional is a fluctuation-dissipation theorem applicable arbitrarily far from equilibrium, that captures the effect of non-local and time-dependent behavior from transient driving forces. Based on this work, it is clear that statistical mechanics is a general tool for constructing the relationships between constraints on system information.

We present a perspective on molecular machine learning (ML) in the field of chemical process engineering. Recently, molecular ML has demonstrated great potential in (i) providing highly accurate predictions for properties of pure components and their mixtures, and (ii) exploring the chemical space for new molecular structures. We review current state-of-the-art molecular ML models and discuss research directions that promise further advancements. This includes ML methods, such as graph neural networks and transformers, which can be further advanced through the incorporation of physicochemical knowledge in a hybrid or physics-informed fashion. Then, we consider leveraging molecular ML at the chemical process scale, which is highly desirable yet rather unexplored. We discuss how molecular ML can be integrated into process design and optimization formulations, promising to accelerate the identification of novel molecules and processes. To this end, it will be essential to create molecule and process design benchmarks and practically validate proposed candidates, possibly in collaboration with the chemical industry.

Olympiad-level benchmarks in mathematics and physics are crucial testbeds for advanced AI reasoning, but chemistry, with its unique multimodal symbolic language, has remained an open challenge. We introduce ChemO, a new benchmark built from the International Chemistry Olympiad (IChO) 2025. ChemO features two key innovations for automated assessment: Assessment-Equivalent Reformulation (AER), which converts problems requiring visual outputs (e.g., drawing molecules) into computationally tractable formats, and Structured Visual Enhancement (SVE), a diagnostic mechanism to disentangle a model's visual perception capabilities from its core chemical reasoning. To tackle this benchmark, we propose ChemLabs, a hierarchical multi-agent framework that mimics human expert collaboration through specialized agents for problem decomposition, perception, reasoning, and auditing. Experiments on state-of-the-art multimodal models demonstrate that combining SVE with our multi-agent system yields dramatic performance gains. Our top configuration achieves a score of 93.6 out of 100, surpassing an estimated human gold medal threshold and establishing a new state-of-the-art in automated chemical problem-solving. ChemO Dataset: https://huggingface.co/datasets/IDEA-AI4SCI/ChemO

This paper presents a mathematical framework for optimizing drug delivery in cancer treatment using a nonlocal model of solid tumor growth. We present a coupled system of partial differential equations that incorporate long-range cellular interactions through integral terms and drug-induced cell death. The model accounts for spatial heterogeneity in both tumor cell density and drug concentration while capturing the complex dynamics of drug resistance development. We first establish the well-posedness of the coupled system by proving the existence and uniqueness of a solution under appropriate regularity conditions. The optimal control problem is then formulated to minimize tumor size while accounting for drug toxicity constraints. Using variational methods, we derive the necessary optimality conditions and characterize the optimal control through an adjoint system. Theoretical results can help to design effective chemotherapy schedules that balance treatment efficacy with adverse effects.

Hiding an object in a chemical gradient requires to suppress the distortions it would naturally cause on it. To do so, we propose a strategy based on coating the object with a chemical reaction-diffusion network which can act as an active cloaking device. By controlling the concentration of some species in its immediate surrounding, the chemical reactions redirect the gradient as if the object was not there. We also show that a substantial fraction of the energy required to cloak can be extracted from the chemical gradient itself.

Recent advances in language models have enabled framing molecule generation as sequence modeling. However, existing approaches often rely on single-objective reinforcement learning, limiting their applicability to real-world drug design, where multiple competing properties must be optimized. Traditional multi-objective reinforcement learning (MORL) methods require costly retraining for each new objective combination, making rapid exploration of trade-offs impractical. To overcome these limitations, we introduce Mol-MoE, a mixture-of-experts (MoE) architecture that enables efficient test-time steering of molecule generation without retraining. Central to our approach is a preference-based router training objective that incentivizes the router to combine experts in a way that aligns with user-specified trade-offs. This provides improved flexibility in exploring the chemical property space at test time, facilitating rapid trade-off exploration. Benchmarking against state-of-the-art methods, we show that Mol-MoE achieves superior sample quality and steerability.

In this work, we introduce a novel approach for predicting thermodynamic properties of binary mixtures, which we call the similarity-based method (SBM). The method is based on quantifying the pairwise similarity of components, which we achieve by comparing quantum-chemical descriptors of the components, namely σ-profiles. The basic idea behind the approach is that mixtures with similar pairs of components will have similar thermodynamic properties. The SBM is trained on a matrix that contains some data for a given property for different binary mixtures; the missing entries are then predicted by the SBM. As an example, we consider the prediction of isothermal activity coefficients at infinite dilution (γ^infty_{ij}) and show that the SBM outperforms the well-established physical methods modified UNIFAC (Dortmund) and COSMO-SAC-dsp. In this case, the matrix is only sparsely occupied, and it is shown that the SBM works also if only a limited number of data for similar mixtures is available. The SBM idea can be transferred to any mixture property and is a powerful tool for generating essential data for many applications.

Accurate prediction of atomistic, thermodynamic, and kinetic properties from molecular structures underpins materials innovation. Existing computational and experimental approaches lack the scalability required to efficiently navigate chemical space. Scientific foundation models trained on large unlabeled datasets offer a path toward exploring chemical space across diverse application domains. Here we develop MIST, a family of molecular foundation models with up to an order of magnitude more parameters and data than prior works. Trained using a novel tokenization scheme that comprehensively captures nuclear, electronic, and geometric information, MIST learns from a diverse range of molecules. MIST models have been fine-tuned to predict more than 400 structure -- property relationships and match or exceed state-of-the-art performance across benchmarks spanning physiology, electrochemistry, and quantum chemistry. We demonstrate the ability of these models to solve real-world problems across chemical space, including multiobjective electrolyte solvent screening, olfactory perception mapping, isotope half-life prediction, stereochemical reasoning for chiral organometallic compounds, and binary and multi-component mixture property prediction. Probing MIST models using mechanistic interpretability methods reveals identifiable patterns and trends not explicitly present in the training data, suggesting that the models learn generalizable scientific concepts. We formulate hyperparameter-penalized Bayesian neural scaling laws and use them to reduce the computational cost of model development by an order of magnitude. The methods and findings presented here represent a significant step toward accelerating materials discovery, design, and optimization using foundation models and provide valuable guidance for training compute-optimal scientific foundation models.

Tunnelling reactions of molecules embedded on cryogenic noble-gas matrices are being used in fundamental studies of how reactivity varies with the nature of the supposedly inert matrix as well as pointers to the chemistry occurring in the interstellar medium on ice-grains. To these ends we present chemical kinetic rate constants for the cis to trans isomerisation of seleno-, thio- and monomeric formic acids and that of their three dimeric species, based on multidimensional calculations in the gas-phase, from 10~K to 300~K as a guide to the matrix reactions.

The efficient exploration of chemical space to design molecules with intended properties enables the accelerated discovery of drugs, materials, and catalysts, and is one of the most important outstanding challenges in chemistry. Encouraged by the recent surge in computer power and artificial intelligence development, many algorithms have been developed to tackle this problem. However, despite the emergence of many new approaches in recent years, comparatively little progress has been made in developing realistic benchmarks that reflect the complexity of molecular design for real-world applications. In this work, we develop a set of practical benchmark tasks relying on physical simulation of molecular systems mimicking real-life molecular design problems for materials, drugs, and chemical reactions. Additionally, we demonstrate the utility and ease of use of our new benchmark set by demonstrating how to compare the performance of several well-established families of algorithms. Surprisingly, we find that model performance can strongly depend on the benchmark domain. We believe that our benchmark suite will help move the field towards more realistic molecular design benchmarks, and move the development of inverse molecular design algorithms closer to designing molecules that solve existing problems in both academia and industry alike.

Over the past three decades, numerous controllers have been developed to regulate complex chemical processes, but they have certain limitations. Traditional PI/PID controllers often require customized tuning for various set-point scenarios. On the other hand, MPC frameworks involve resource-intensive steps, and the utilization of black-box machine learning (ML) models can lead to issues such as local minima and infeasibility. Thus, there is a need for an alternative controller paradigm that combines the simplicity of a PI controller with the grade-to-grade (G2G) transferability of an MPC approach. To this end, we developed a novel LSTM controller (LSTMc) as a model-free data-driven controller framework. The LSTMc considers an augmented input tensor that incorporates information on state evolution and error dynamics for the current and previous W time steps, to predict the manipulated input at the next step (u_{t+1}). To demonstrate LSTMc, batch crystallization of dextrose was taken as a representative case study. The desired output for set-point tracking was the mean crystal size (L), with the manipulated input being the jacket temperature (T_j). Extensive training data, encompassing 7000+ different operating conditions, was compiled to ensure comprehensive training of LSTMc across a wide state space region. For comparison, we also designed a PI controller and an LSTM-MPC for different set-point tracking cases. The results consistently showed that LSTMc achieved the lowest set-point deviation (<2\%), three times lower than the MPC. Remarkably, LSTMc maintained this superior performance across all set points, even when sensor measurements contained noise levels of 10\% to 15\%. In summary, by effectively leveraging process data and utilizing sequential ML models, LSTMc offers a superior controller design approach.

Machine-learned force fields have transformed the atomistic modelling of materials by enabling simulations of ab initio quality on unprecedented time and length scales. However, they are currently limited by: (i) the significant computational and human effort that must go into development and validation of potentials for each particular system of interest; and (ii) a general lack of transferability from one chemical system to the next. Here, using the state-of-the-art MACE architecture we introduce a single general-purpose ML model, trained on a public database of 150k inorganic crystals, that is capable of running stable molecular dynamics on molecules and materials. We demonstrate the power of the MACE-MP-0 model -- and its qualitative and at times quantitative accuracy -- on a diverse set problems in the physical sciences, including the properties of solids, liquids, gases, and chemical reactions. The model can be applied out of the box and as a starting or "foundation model" for any atomistic system of interest and is thus a step towards democratising the revolution of ML force fields by lowering the barriers to entry.

Graph neural networks (GNNs) are one of the most popular research topics for deep learning. GNN methods typically have been designed on top of the graph signal processing theory. In particular, diffusion equations have been widely used for designing the core processing layer of GNNs, and therefore they are inevitably vulnerable to the notorious oversmoothing problem. Recently, a couple of papers paid attention to reaction equations in conjunctions with diffusion equations. However, they all consider limited forms of reaction equations. To this end, we present a reaction-diffusion equation-based GNN method that considers all popular types of reaction equations in addition to one special reaction equation designed by us. To our knowledge, our paper is one of the most comprehensive studies on reaction-diffusion equation-based GNNs. In our experiments with 9 datasets and 28 baselines, our method, called GREAD, outperforms them in a majority of cases. Further synthetic data experiments show that it mitigates the oversmoothing problem and works well for various homophily rates.

Markov jump processes are continuous-time stochastic processes which describe dynamical systems evolving in discrete state spaces. These processes find wide application in the natural sciences and machine learning, but their inference is known to be far from trivial. In this work we introduce a methodology for zero-shot inference of Markov jump processes (MJPs), on bounded state spaces, from noisy and sparse observations, which consists of two components. First, a broad probability distribution over families of MJPs, as well as over possible observation times and noise mechanisms, with which we simulate a synthetic dataset of hidden MJPs and their noisy observation process. Second, a neural network model that processes subsets of the simulated observations, and that is trained to output the initial condition and rate matrix of the target MJP in a supervised way. We empirically demonstrate that one and the same (pretrained) model can infer, in a zero-shot fashion, hidden MJPs evolving in state spaces of different dimensionalities. Specifically, we infer MJPs which describe (i) discrete flashing ratchet systems, which are a type of Brownian motors, and the conformational dynamics in (ii) molecular simulations, (iii) experimental ion channel data and (iv) simple protein folding models. What is more, we show that our model performs on par with state-of-the-art models which are finetuned to the target datasets.

Optimal operation of chemical processes is vital for energy, resource, and cost savings in chemical engineering. The problem of optimal operation can be tackled with reinforcement learning, but traditional reinforcement learning methods face challenges due to hard constraints related to quality and safety that must be strictly satisfied, and the large amount of required training data. Chemical processes often cannot provide sufficient experimental data, and while detailed dynamic models can be an alternative, their complexity makes it computationally intractable to generate the needed data. Optimal control methods, such as model predictive control, also struggle with the complexity of the underlying dynamic models. Consequently, many chemical processes rely on manually defined operation recipes combined with simple linear controllers, leading to suboptimal performance and limited flexibility. In this work, we propose a novel approach that leverages expert knowledge embedded in operation recipes. By using reinforcement learning to optimize the parameters of these recipes and their underlying linear controllers, we achieve an optimized operation recipe. This method requires significantly less data, handles constraints more effectively, and is more interpretable than traditional reinforcement learning methods due to the structured nature of the recipes. We demonstrate the potential of our approach through simulation results of an industrial batch polymerization reactor, showing that it can approach the performance of optimal controllers while addressing the limitations of existing methods.

In this paper, we present efficient quantum algorithms that are exponentially faster than classical algorithms for solving the quantum optimal control problem. This problem involves finding the control variable that maximizes a physical quantity at time T, where the system is governed by a time-dependent Schr\"odinger equation. This type of control problem also has an intricate relation with machine learning. Our algorithms are based on a time-dependent Hamiltonian simulation method and a fast gradient-estimation algorithm. We also provide a comprehensive error analysis to quantify the total error from various steps, such as the finite-dimensional representation of the control function, the discretization of the Schr\"odinger equation, the numerical quadrature, and optimization. Our quantum algorithms require fault-tolerant quantum computers.

Large language models (LLMs) have made impressive progress in chemistry applications, including molecular property prediction, molecular generation, experimental protocol design, etc. However, the community lacks a dialogue-based model specifically designed for chemistry. The challenge arises from the fact that most chemical data and scientific knowledge are primarily stored in structured databases, and the direct use of these structured data compromises the model's ability to maintain coherent dialogue. To tackle this issue, we develop a novel template-based instruction construction method that transforms structured knowledge into plain dialogue, making it suitable for language model training. By leveraging this approach, we develop ChemLLM, the first large language model dedicated to chemistry, capable of performing various tasks across chemical disciplines with smooth dialogue interaction. ChemLLM beats GPT-3.5 on all three principal tasks in chemistry, i.e., name conversion, molecular caption, and reaction prediction, and surpasses GPT-4 on two of them. Remarkably, ChemLLM also shows exceptional adaptability to related mathematical and physical tasks despite being trained mainly on chemical-centric corpora. Furthermore, ChemLLM demonstrates proficiency in specialized NLP tasks within chemistry, such as literature translation and cheminformatic programming. ChemLLM opens up a new avenue for exploration within chemical studies, while our method of integrating structured chemical knowledge into dialogue systems sets a new frontier for developing LLMs across various scientific fields. Codes, Datasets, and Model weights are publicly accessible at hf.co/AI4Chem/ChemLLM-7B-Chat.

In this note, we show that the Local Molecular Field theory of Weeks et. al. can be re-derived as an extremum problem for an approximate Helmholtz free energy. Using the resulting free energy as a classical, fluid density functional yields an implicit solvent method identical in form to the Molecular Density Functional theory of Borgis et. al., but with an explicit formula for the 'ideal' free energy term. This new expression for the ideal free energy term can be computed from all-atom molecular dynamics of a solvent with only short-range interactions. The key hypothesis required to make the theory valid is that all smooth (and hence long-range) energy functions obey Gaussian statistics. This is essentially a random phase approximation for perturbations from a short-range only, 'reference,' fluid. This single hypothesis is enough to prove that the self-consistent LMF procedure minimizes a novel density functional whose 'ideal' free energy is the molecular system under a specific, reference Hamiltonian, as opposed to the non-interacting gas of conventional density functionals. Implementation of this new functional into existing software should be straightforward and robust.

A physically motivated equation that determines the number of electrons of a molecule is proposed based on chemical common sense. It shows that all molecules are entangled in the number of electrons and results in the fundamental assumption of molecular energy convexity that underpins molecular quantum mechanics. The proposed physical principle includes the molecular size consistency principle as a special case. Application of wavefunction theory to the principle shows that an individual molecule with a noninteger number of electrons is locally physical albeit locally unreal. The energy of a molecule is piecewise linear with respect to its continuous number of electrons. The continuity of the number of electrons allows the definition of an electronic chemical potential of a single molecule. A state function equivalent to the energy of a molecule can be defined using the chemical potential as a variable. The aforementioned physical principle can alternatively be expressed as a simple additivity with the new state function. The latter also shows that the quantum entanglement in the number of electrons can be viewed as all molecules sharing the same chemical potential.

We describe and analyse Levenberg-Marquardt methods for solving systems of nonlinear equations. More specifically, we propose an adaptive formula for the Levenberg-Marquardt parameter and analyse the local convergence of the method under Hölder metric subregularity of the function defining the equation and Hölder continuity of its gradient mapping. Further, we analyse the local convergence of the method under the additional assumption that the Łojasiewicz gradient inequality holds. We finally report encouraging numerical results confirming the theoretical findings for the problem of computing moiety conserved steady states in biochemical reaction networks. This problem can be cast as finding a solution of a system of nonlinear equations, where the associated mapping satisfies the Łojasiewicz gradient inequality assumption.

Altering chemical reactivity and material structure in confined optical environments is on the rise, and yet, a conclusive understanding of the microscopic mechanisms remains elusive. This originates mostly from the fact that accurately predicting vibrational and reactive dynamics for soluted ensembles of realistic molecules is no small endeavor, and adding (collective) strong light-matter interaction does not simplify matters. Here, we establish a framework based on a combination of machine learning (ML) models, trained using density-functional theory calculations, and molecular dynamics to accelerate such simulations. We then apply this approach to evaluate strong coupling, changes in reaction rate constant, and their influence on enthalpy and entropy for the deprotection reaction of 1-phenyl-2-trimethylsilylacetylene, which has been studied previously both experimentally and using ab initio simulations. While we find qualitative agreement with critical experimental observations, especially with regard to the changes in kinetics, we also find differences in comparison with previous theoretical predictions. The features for which the ML-accelerated and ab initio simulations agree show the experimentally estimated kinetic behavior. Conflicting features indicate that a contribution of dynamic electronic polarization to the reaction process is more relevant then currently believed. Our work demonstrates the practical use of ML for polaritonic chemistry, discusses limitations of common approximations and paves the way for a more holistic description of polaritonic chemistry.

Many chemical concepts can be well defined in the context of quantum chemical theories. Examples are the electronegativity scale of Mulliken and Jaffe and the hard and soft acids and bases concept of Pearson. The sound theoretical basis allows for a systematic definition of such concepts. However, while they are often used to describe and compare chemical processes in terms of reactivity, their predictive power remains unclear. In this work, we elaborate on the predictive potential of chemical reactivity concepts, which can be crucial for autonomous reaction exploration protocols to guide them by first-principles heuristics that expoit these concepts.

Developing accurate models for chemical reactors is often challenging due to the complexity of reaction kinetics and process dynamics. Traditional approaches require retraining models for each new system, limiting generalizability and efficiency. In this work, we take a step toward foundation models for chemical reactor modeling by introducing a neural network framework that generalizes across diverse reactor types and rapidly adapts to new chemical processes. Our approach leverages meta-learning to pretrain the model on a broad set of reactor dynamics, enabling efficient adaptation to unseen reactions with minimal data. To further enhance generalizability, we incorporate physics-informed fine-tuning, ensuring physically consistent adaptation to new reactor conditions. Our framework is evaluated across three integer-order fundamental reactor types - continuous stirred tank reactors, batch reactors, and plug flow reactors - demonstrating superior few-shot adaptation compared to conventional data-driven, physics-informed, and transfer learning approaches. By combining meta-learning with physics-informed adaptation, this work lays the foundation for a generalizable modeling framework, advancing the development of foundation models for chemical engineering applications. Source code is available at https://github.com/killingbear999/chemical-reactor-foundation-model.

Language models are revolutionizing the biochemistry domain, assisting scientists in drug design and chemical synthesis with high efficiency. Yet current approaches struggle between small language models prone to hallucination and limited knowledge retention, and large cloud-based language models plagued by privacy risks and high inference costs. To bridge this gap, we introduce ChemCRAFT, a novel framework leveraging agentic reinforcement learning to decouple chemical reasoning from knowledge storage. Instead of forcing the model to memorize vast chemical data, our approach empowers the language model to interact with a sandbox for precise information retrieval. This externalization of knowledge allows a locally deployable small model to achieve superior performance with minimal inference costs. To enable small language models for agent-calling ability, we build an agentic trajectory construction pipeline and a comprehensive chemical-agent sandbox. Based on sandbox interactions, we constructed ChemToolDataset, the first large-scale chemical tool trajectory dataset. Simultaneously, we propose SMILES-GRPO to build a dense chemical reward function, promoting the model's ability to call chemical agents. Evaluations across diverse aspects of drug design show that ChemCRAFT outperforms current cloud-based LLMs in molecular structure analysis, molecular optimization, and synthesis pathway prediction, demonstrating that scientific reasoning is not solely an emergent ability of model scale, but a learnable policy of tool orchestration. This work establishes a cost-effective and privacy-preserving paradigm for AI-aided chemistry, opening new avenues for accelerating molecular discovery with locally deployable agents. Code available at https://github.com/HowardLi1984/ChemCraft.

We report a series of deep learning models to solve complex forward and inverse design problems in molecular modeling and design. Using both diffusion models inspired by nonequilibrium thermodynamics and attention-based transformer architectures, we demonstrate a flexible framework to capture complex chemical structures. First trained on the QM9 dataset and a series of quantum mechanical properties (e.g. homo, lumo, free energy, heat capacity, etc.), we then generalize the model to study and design key properties of deep eutectic solvents. In addition to separate forward and inverse models, we also report an integrated fully prompt-based multi-task generative pretrained transformer model that solves multiple forward, inverse design, and prediction tasks, flexibly and within one model. We show that the multi-task generative model has the overall best performance and allows for flexible integration of multiple objectives, within one model, and for distinct chemistries, suggesting that synergies emerge during training of this large language model. Trained jointly in tasks related to the QM9 dataset and deep eutectic solvents (DESs), the model can predict various quantum mechanical properties and critical properties to achieve deep eutectic solvent behavior. Several novel combinations of DESs are proposed based on this framework.

The Markov entropy decomposition (MED) is a recently-proposed, cluster-based simulation method for finite temperature quantum systems with arbitrary geometry. In this paper, we detail numerical algorithms for performing the required steps of the MED, principally solving a minimization problem with a preconditioned Newton's algorithm, as well as how to extract global susceptibilities and thermal responses. We demonstrate the power of the method with the spin-1/2 XXZ model on the 2D square lattice, including the extraction of critical points and details of each phase. Although the method shares some qualitative similarities with exact-diagonalization, we show the MED is both more accurate and significantly more flexible.

In contrast to entropy, which increases monotonically, the "complexity" or "interestingness" of closed systems seems intuitively to increase at first and then decrease as equilibrium is approached. For example, our universe lacked complex structures at the Big Bang and will also lack them after black holes evaporate and particles are dispersed. This paper makes an initial attempt to quantify this pattern. As a model system, we use a simple, two-dimensional cellular automaton that simulates the mixing of two liquids ("coffee" and "cream"). A plausible complexity measure is then the Kolmogorov complexity of a coarse-grained approximation of the automaton's state, which we dub the "apparent complexity." We study this complexity measure, and show analytically that it never becomes large when the liquid particles are non-interacting. By contrast, when the particles do interact, we give numerical evidence that the complexity reaches a maximum comparable to the "coffee cup's" horizontal dimension. We raise the problem of proving this behavior analytically.

Traditional AI methods often rely on task-specific model designs and training, which constrain both the scalability of model size and generalization across different tasks. Here, we introduce ChemFM, a large foundation model specifically developed for chemicals. By conducting a series of scaling experiments, we identify UniChem as the informative molecular database for pre-training the foundation model. ChemFM comprises 3 billion parameters and is pre-trained on 178 million molecules using self-supervised causal language modeling to extract generalizable molecular representations. This model can be adapted to diverse downstream chemical applications using either full-parameter or parameter-efficient fine-tuning methods. ChemFM consistently outperforms state-of-the-art task-specific AI models across all tested tasks. Notably, it achieves up to 67.48% performance improvement across 34 property prediction benchmarks, up to 33.80% reduction in mean average deviation between conditioned and actual properties of generated molecules in conditional molecular generation tasks, and up to 3.7% top-1 accuracy improvement across 4 reaction prediction datasets. Moreover, ChemFM demonstrates its superior performance in predicting antibiotic activity and cytotoxicity, highlighting its potential to advance the discovery of novel antibiotics. Furthermore, we demonstrate that, as a foundation model, ChemFM exhibits strong data efficiency, requiring significantly fewer labeled training samples to achieve state-of-the-art performance. We anticipate that ChemFM will significantly advance chemistry research by providing a foundation model capable of effectively generalizing across a broad range of tasks with minimal additional training.

We study the problem of the transformation of a given reactant species into an immiscible product species, as they flow through a chemically active porous medium. We derive the equation governing the evolution of the volume fraction of the species -- in a one-dimensional macroscopic description --, identify the relevant dimensionless numbers, and provide simple models for capillary pressure and relative permeabilities, which are quantities of crucial importance when tackling multiphase flows in porous media. We set the domain of validity of our models and discuss the importance of viscous coupling terms in the extended Darcy's law. We investigate numerically the steady regime and demonstrate that the spatial transformation rate of the species along the reactor is non-monotonous, as testified by the existence of an inflection point in the volume fraction profiles. We obtain the scaling of the location of this inflection point with the dimensionless lengths of the problem. Eventually, we provide key elements for optimization of the reactor.

Fundamental experimental measurements of quantities such as ignition delay times, laminar flame speeds, and species profiles (among others) serve important roles in understanding fuel chemistry and validating chemical kinetic models. However, despite both the importance and abundance of such information in the literature, the community lacks a widely adopted standard format for this data. This impedes both sharing and wide use by the community. Here we introduce a new chemical kinetics experimental data format, ChemKED, and the related Python-based package for validating and working with ChemKED-formatted files called PyKED. We also review past and related efforts, and motivate the need for a new solution. ChemKED currently supports the representation of autoignition delay time measurements from shock tubes and rapid compression machines. ChemKED-formatted files contain all of the information needed to simulate experimental data points, including the uncertainty of the data. ChemKED is based on the YAML data serialization language, and is intended as a human- and machine-readable standard for easy creation and automated use. Development of ChemKED and PyKED occurs openly on GitHub under the BSD 3-clause license, and contributions from the community are welcome. Plans for future development include support for experimental data from laminar flame, jet stirred reactor, and speciation measurements.

Knowledge of mixtures' phase equilibria is crucial in nature and technical chemistry. Phase equilibria calculations of mixtures require activity coefficients. However, experimental data on activity coefficients is often limited due to high cost of experiments. For an accurate and efficient prediction of activity coefficients, machine learning approaches have been recently developed. However, current machine learning approaches still extrapolate poorly for activity coefficients of unknown molecules. In this work, we introduce the SMILES-to-Properties-Transformer (SPT), a natural language processing network to predict binary limiting activity coefficients from SMILES codes. To overcome the limitations of available experimental data, we initially train our network on a large dataset of synthetic data sampled from COSMO-RS (10 Million data points) and then fine-tune the model on experimental data (20 870 data points). This training strategy enables SPT to accurately predict limiting activity coefficients even for unknown molecules, cutting the mean prediction error in half compared to state-of-the-art models for activity coefficient predictions such as COSMO-RS, UNIFAC, and improving on recent machine learning approaches.

Modern optimization in experimental chemistry employs algorithmic search through black-box parameter spaces. Here we demonstrate that pre-trained knowledge in large language models (LLMs) fundamentally changes this paradigm. Using six fully enumerated categorical reaction datasets (768 - 5,684 experiments), we benchmark LLM-guided optimization (LLM-GO) against Bayesian optimization (BO) and random sampling. Frontier LLMs consistently match or exceed BO performance across five single-objective datasets, with advantages growing as parameter complexity increases and high-performing conditions become scarce (<5% of space). BO retains superiority only for explicit multi-objective trade-offs. To understand these contrasting behaviors, we introduce a topology-agnostic information theory framework quantifying sampling diversity throughout optimization campaigns. This analysis reveals that LLMs maintain systematically higher exploration entropy than BO across all datasets while achieving superior performance, with advantages most pronounced in solution-scarce parameter spaces where high-entropy exploration typically fails - suggesting that pre-trained domain knowledge enables more effective navigation of chemical parameter space rather than replacing structured exploration strategies. To enable transparent benchmarking and community validation, we release Iron Mind (https://gomes.andrew.cmu.edu/iron-mind), a no-code platform for side-by-side evaluation of human, algorithmic, and LLM optimization campaigns with public leaderboards and complete trajectories. Our findings establish that LLM-GO excels precisely where traditional methods struggle: complex categorical spaces requiring domain understanding rather than mathematical optimization.

We study a discrete model for generalized exchange-driven growth in which the particle exchanged between two clusters is not limited to be of size one. This set of models include as special cases the usual exchange-driven growth system and the coagulation-fragmentation system with binary fragmentation. Under reasonable general condition on the rate coefficients we establish the existence of admissible solutions, meaning solutions that are obtained as appropriate limit of solutions to a finite-dimensional truncation of the infinite-dimensional ODE. For these solutions we prove that, in the class of models we call isolated both the total number of particles and the total mass are conserved, whereas in those models we can non-isolated only the mass is conserved. Additionally, under more restrictive growth conditions for the rate equations we obtain uniqueness of solutions to the initial value problems.

From a viewpoint of stochastic thermodynamics, we derive equations that describe the collective dynamics near the order-disorder transition in the globally coupled XY model and near the synchronization-desynchronization transition in the Kuramoto model. A new way of thinking is to interpret the deterministic time evolution of a macroscopic variable as an external operation to a thermodynamic system. We then find that the irreversible work determines the equation for the collective dynamics. When analyzing the Kuramoto model, we employ a generalized concept of irreversible work which originates from a non-equilibrium identity associated with steady state thermodynamics.

We investigate the time evolution of the Boltzmann entropy of a dilute gas of N particles, N>>1, as it undergoes a free expansion doubling its volume. The microstate of the system, a point in the 4N dimensional phase space, changes in time via Hamiltonian dynamics. Its entropy, at any time t, is given by the logarithm of the phase space volume of all the microstates giving rise to its macrostate at time t. The macrostates that we consider are defined by coarse graining the one-particle phase space into cells Δ_α. The initial and final macrostates of the system are equilibrium states in volumes V and 2V, with the same energy E and particle number N. Their entropy per particle is given, for sufficiently large systems, by the thermodynamic entropy as a function of the particle and energy density, whose leading term is independent of the size of the Δ_α. The intermediate (non-equilibrium) entropy does however depend on the size of the cells Δ_α. Its change with time is due to (i) dispersal in physical space from free motion and to (ii) the collisions between particles which change their velocities. The former depends strongly on the size of the velocity coarse graining Δv: it produces entropy at a rate proportional to Δv. This dependence is investigated numerically and analytically for a dilute two-dimensional gas of hard discs. It becomes significant when the mean free path between collisions is of the same order or larger than the length scale of the initial spatial inhomogeneity. In the opposite limit, the rate of entropy production is essentially independent of Δv and is given by the Boltzmann equation for the limit Δvrightarrow 0. We show that when both processes are active the time dependence of the entropy has a scaling form involving the ratio of the rates of its production by the two processes.

Collectives of actively-moving particles can spontaneously separate into dilute and dense phases -- a fascinating phenomenon known as motility-induced phase separation (MIPS). MIPS is well-studied for randomly-moving particles with no directional bias. However, many forms of active matter exhibit collective chemotaxis, directed motion along a chemical gradient that the constituent particles can generate themselves. Here, using theory and simulations, we demonstrate that collective chemotaxis strongly competes with MIPS -- in some cases, arresting or completely suppressing phase separation, or in other cases, generating fundamentally new dynamic instabilities. We establish quantitative principles describing this competition, thereby helping to reveal and clarify the rich physics underlying active matter systems that perform chemotaxis, ranging from cells to robots.

Over the last decades, excellent computational chemistry tools have been developed. Their full potential has not yet been reached as most are challenging to learn and exist in isolation. Recently, large-language models (LLMs) have shown strong performance in tasks across domains, but struggle with chemistry-related problems. Moreover, these models lack access to external knowledge sources, limiting their usefulness in scientific applications. In this study, we introduce ChemCrow, an LLM chemistry agent designed to accomplish tasks across organic synthesis, drug discovery, and materials design. By integrating 17 expert-designed tools, ChemCrow augments the LLM performance in chemistry, and new capabilities emerge. Our agent autonomously planned the syntheses of an insect repellent, three organocatalysts, as well as other relevant molecules. Our evaluation, including both LLM and expert assessments, demonstrates ChemCrow's effectiveness in automating a diverse set of chemical tasks. Surprisingly, we find that GPT-4 as an evaluator cannot distinguish between clearly wrong GPT-4 completions and Chemcrow's performance. There is a significant risk of misuse of tools like ChemCrow, and we discuss their potential harms. Employed responsibly, our work not only aids expert chemists and lowers barriers for non-experts, but also fosters scientific advancement by bridging the gap between experimental and computational chemistry. A subset of the code is publicly available at https://github.com/ur-whitelab/chemcrow-public.

Chemical language models (CLMs) have emerged as promising competitors to popular classical machine learning models for molecular property prediction (MPP) tasks. However, an increasing number of studies have reported inconsistent and contradictory results for the performance of CLMs across various MPP benchmark tasks. In this study, we conduct and analyze hundreds of meticulously controlled experiments to systematically investigate the effects of various factors, such as dataset size, model size, and standardization, on the pre-training and fine-tuning performance of CLMs for MPP. In the absence of well-established scaling laws for encoder-only masked language models, our aim is to provide comprehensive numerical evidence and a deeper understanding of the underlying mechanisms affecting the performance of CLMs for MPP tasks, some of which appear to be entirely overlooked in the literature.

Chemical reasoning usually involves complex, multi-step processes that demand precise calculations, where even minor errors can lead to cascading failures. Furthermore, large language models (LLMs) encounter difficulties handling domain-specific formulas, executing reasoning steps accurately, and integrating code effectively when tackling chemical reasoning tasks. To address these challenges, we present ChemAgent, a novel framework designed to improve the performance of LLMs through a dynamic, self-updating library. This library is developed by decomposing chemical tasks into sub-tasks and compiling these sub-tasks into a structured collection that can be referenced for future queries. Then, when presented with a new problem, ChemAgent retrieves and refines pertinent information from the library, which we call memory, facilitating effective task decomposition and the generation of solutions. Our method designs three types of memory and a library-enhanced reasoning component, enabling LLMs to improve over time through experience. Experimental results on four chemical reasoning datasets from SciBench demonstrate that ChemAgent achieves performance gains of up to 46% (GPT-4), significantly outperforming existing methods. Our findings suggest substantial potential for future applications, including tasks such as drug discovery and materials science. Our code can be found at https://github.com/gersteinlab/chemagent

We introduce a machine learning model to predict atomization energies of a diverse set of organic molecules, based on nuclear charges and atomic positions only. The problem of solving the molecular Schrödinger equation is mapped onto a non-linear statistical regression problem of reduced complexity. Regression models are trained on and compared to atomization energies computed with hybrid density-functional theory. Cross-validation over more than seven thousand small organic molecules yields a mean absolute error of ~10 kcal/mol. Applicability is demonstrated for the prediction of molecular atomization potential energy curves.

This paper studies the problem of solving complex chemistry problems with large language models (LLMs). Despite the extensive general knowledge in LLMs (such as GPT-4), they struggle with chemistry reasoning that requires faithful grounded reasoning with diverse chemical knowledge and an integrative understanding of chemical interactions. We propose InstructChem, a new structured reasoning approach that substantially boosts the LLMs' chemical reasoning capabilities. InstructChem explicitly decomposes the reasoning into three critical phrases, including chemical formulae generation by LLMs that offers the basis for subsequent grounded reasoning, step-by-step reasoning that makes multi-step derivations with the identified formulae for a preliminary answer, and iterative review-and-refinement that steers LLMs to progressively revise the previous phases for increasing confidence, leading to the final high-confidence answer. We conduct extensive experiments on four different chemistry challenges, including quantum chemistry, quantum mechanics, physical chemistry, and chemistry kinetics. Our approach significantly enhances GPT-4 on chemistry reasoning, yielding an 8% average absolute improvement and a 30% peak improvement. We further use the generated reasoning by GPT-4 to fine-tune smaller LMs (e.g., Vicuna) and observe strong improvement of the smaller LMs. This validates our approach and enables LLMs to generate high-quality reasoning.

We present a method for computing free-energy differences using thermodynamic integration with a neural network potential that interpolates between two target Hamiltonians. The interpolation is defined at the sample distribution level, and the neural network potential is optimized to match the corresponding equilibrium potential at every intermediate time-step. Once the interpolating potentials and samples are well-aligned, the free-energy difference can be estimated using (neural) thermodynamic integration. To target molecular systems, we simultaneously couple Lennard-Jones and electrostatic interactions and model the rigid-body rotation of molecules. We report accurate results for several benchmark systems: a Lennard-Jones particle in a Lennard-Jones fluid, as well as the insertion of both water and methane solutes in a water solvent at atomistic resolution using a simple three-body neural-network potential.

In this paper, we develop and implement an efficient asymptotic-preserving (AP) scheme to solve the gas mixture of Boltzmann equations under the disparate mass scaling relevant to the so-called "epochal relaxation" phenomenon. The disparity in molecular masses, ranging across several orders of magnitude, leads to significant challenges in both the evaluation of collision operators and the designing of time-stepping schemes to capture the multi-scale nature of the dynamics. A direct implementation of the spectral method faces prohibitive computational costs as the mass ratio increases due to the need to resolve vastly different thermal velocities. Unlike [I. M. Gamba, S. Jin, and L. Liu, Commun. Math. Sci., 17 (2019), pp. 1257-1289], we propose an alternative approach based on proper truncation of asymptotic expansions of the collision operators, which significantly reduces the computational complexity and works well for small varepsilon. By incorporating the separation of three time scales in the model's relaxation process [P. Degond and B. Lucquin-Desreux, Math. Models Methods Appl. Sci., 6 (1996), pp. 405-436], we design an AP scheme that captures the specific dynamics of the disparate mass model while maintaining computational efficiency. Numerical experiments demonstrate the effectiveness of the proposed scheme in handling large mass ratios of heavy and light species, as well as capturing the epochal relaxation phenomenon.

We formulate nonequilibrium thermodynamics in which intensive variables acquire operational meaning through measurement protocols consistent with local reciprocity. Using physical equilibrium as a reference, conjugate observables are constructed by continuously adjusting devices along the local tangent space of the statistical manifold. In this relativity of observation, Onsager reciprocity holds locally, allowing inference-based Lagrange multipliers to be directly measured. This provides a systematic method to extend operational definitions of intensive variables to nonequilibrium states, highlighting their context-dependent nature and offering a concrete experimental strategy.

Molecular Dynamics (MD) is a powerful computational microscope for probing protein functions. However, the need for fine-grained integration and the long timescales of biomolecular events make MD computationally expensive. To address this, several generative models have been proposed to generate surrogate trajectories at lower cost. Yet, these models typically learn a fixed-lag transition density, causing the training signal to be dominated by frequent but uninformative transitions. We introduce a new class of generative models, MSM Emulators, which instead learn to sample transitions across discrete states defined by an underlying Markov State Model (MSM). We instantiate this class with Markov Space Flow Matching (MarS-FM), whose sampling offers more than two orders of magnitude speedup compared to implicit- or explicit-solvent MD simulations. We benchmark Mars-FM ability to reproduce MD statistics through structural observables such as RMSD, radius of gyration, and secondary structure content. Our evaluation spans protein domains (up to 500 residues) with significant chemical and structural diversity, including unfolding events, and enforces strict sequence dissimilarity between training and test sets to assess generalization. Across all metrics, MarS-FM outperforms existing methods, often by a substantial margin.

While attaining external field control of bimolecular chemical reactions has long been a coveted goal of physics and chemistry, the role of hyperfine interactions and dc magnetic fields in achieving such control has remained elusive. We develop an extended coupled-channel statistical theory of barrierless atom-diatom chemical reactions, and apply it to elucidate the effects of magnetic fields and hyperfine interactions on the ultracold chemical reaction Li(^2S_{1/2}) + CaH(^2Σ^+) to LiH(^1Σ^+) + Ca(^1S_{0}) on a newly developed set of ab initio potential energy surfaces. We observe large field effects on the reaction cross sections, opening up the possibility of controlling ultracold barrierless chemical reactions by tuning selected hyperfine states of the reactants with an external magnetic field.

Despite the long history of electrochemistry, there is a lack of quantitative algorithms that rigorously correlate experiment with theory. Electrochemical modeling has had advanced across empirical, analytical, numerical, and data-driven paradigms. Data-driven machine learning and physics based electrochemical modeling, however, have not been explicitly linked. Here we introduce Differentiable Electrochemistry, a mew paradigm in electrochemical modeling that integrates thermodynamics, kinetics and mass transport with differentiable programming enabled by automatic differentiation. By making the entire electrochemical simulation end-to-end differentiable, this framework enables gradient-based optimization for mechanistic discovery from experimental and simulation data, achieving approximately one to two orders of improvement over gradient-free methods. We develop a rich repository of differentiable simulators across diverse mechanisms, and apply Differentiable Electrochemistry to bottleneck problems in kinetic analysis. Specifically, Differentiable Electrochemistry advances beyond Tafel and Nicholson method by removing several limitations including Tafel region selection, and identifies the electron transfer mechanism in Li metal electrodeposition/stripping by parameterizing the full Marcus-Hush-Chidsey formalism. In addition, Differentiable Electrochemistry interprets Operando X-ray measurements in concentrated electrolyte by coupling concentration and velocity theories. This framework resolves ambiguity when multiple electrochemical theories intertwine, and establishes a physics-consistent and data-efficient foundation for predictive electrochemical modeling.

Cavity optomechanical systems in the quantum regime consist of a cavity mode and mechanical element coupled together through radiation pressure. In the nonlinear optomechanical regime, open-system dynamics is generally challenging to treat analytically, since the noise terms do not commute with the optomechanical interaction term. Specifically, a general treatment of both Markovian and non-Markovian mechanical noise in the nonlinear optomechanical regime is still outstanding. Here we address this question by solving the full dynamics of an optomechanical system in the nonlinear regime where the mechanical element interacts with a bath of harmonic oscillators, representing full quantum Brownian motion. The solutions, which are exact and analytic, allow us to consider the strength of the optomechanical nonlinearity in the presence of both Markovian (Ohmic) and non-Markovian (sub-Ohmic and super-Ohmic) baths. We show that that while the strength of the nonlinearity is generally reduced by a Markovian bath spectrum, it can be enhanced by constructing a bath with a highly non-Markovian structure. The results have potential implications for future optomechanical experiments which seek to achieve a strong optomechanical nonlinearity.

We establish a fundamental connection between score-based diffusion models and non-equilibrium thermodynamics by deriving performance limits based on entropy rates. Our main theoretical contribution is a lower bound on the negative log-likelihood of the data that relates model performance to entropy rates of diffusion processes. We numerically validate this bound on a synthetic dataset and investigate its tightness. By building a bridge to entropy rates - system, intrinsic, and exchange entropy - we provide new insights into the thermodynamic operation of these models, drawing parallels to Maxwell's demon and implications for thermodynamic computing hardware. Our framework connects generative modeling performance to fundamental physical principles through stochastic thermodynamics.

We model and study the processes of excitation, absorption, and transfer in various networks. The model consists of a harmonic oscillator representing a single-mode radiation field, a qubit acting as an antenna, a network through which the excitation propagates, and a qubit at the end serving as a sink. We investigate how off-resonant excitations can be optimally absorbed and transmitted through the network. Three strategies are considered: optimising network energies, adjusting the couplings between the radiation field, the antenna, and the network, or introducing and optimising driving fields at the start and end of the network. These strategies are tested on three different types of network with increasing complexity: nearest-neighbour and star configurations, and one associated with the Fenna-Matthews-Olson complex. The results show that, among the various strategies, the introduction of driving fields is the most effective, leading to a significant increase in the probability of reaching the sink in a given time. This result remains stable across networks of varying dimensionalities and types, and the driving process requires only a few parameters to be effective.

We propose a simple auto-encoder framework for molecule generation. The molecular graph is first encoded into a continuous latent representation z, which is then decoded back to a molecule. The encoding process is easy, but the decoding process remains challenging. In this work, we introduce a simple two-step decoding process. In a first step, a fully connected neural network uses the latent vector z to produce a molecular formula, for example CO_2 (one carbon and two oxygen atoms). In a second step, a graph convolutional neural network uses the same latent vector z to place bonds between the atoms that were produced in the first step (for example a double bond will be placed between the carbon and each of the oxygens). This two-step process, in which a bag of atoms is first generated, and then assembled, provides a simple framework that allows us to develop an efficient molecule auto-encoder. Numerical experiments on basic tasks such as novelty, uniqueness, validity and optimized chemical property for the 250k ZINC molecules demonstrate the performances of the proposed system. Particularly, we achieve the highest reconstruction rate of 90.5\%, improving the previous rate of 76.7\%. We also report the best property improvement results when optimization is constrained by the molecular distance between the original and generated molecules.

Effectively leveraging data from multiple quantum-chemical methods is essential for building machine-learned force fields (MLFFs) that are applicable to a wide range of chemical systems. This study systematically investigates two multi-fidelity training strategies, pre-training/fine-tuning and multi-headed training, to elucidate the mechanisms underpinning their success. We identify key factors driving the efficacy of pre-training followed by fine-tuning, but find that internal representations learned during pre-training are inherently method-specific, requiring adaptation of the model backbone during fine-tuning. Multi-headed models offer an extensible alternative, enabling simultaneous training on multiple fidelities. We demonstrate that a multi-headed model learns method-agnostic representations that allow for accurate predictions across multiple label sources. While this approach introduces a slight accuracy compromise compared to sequential fine-tuning, it unlocks new cost-efficient data generation strategies and paves the way towards developing universal MLFFs.

Learning the continuous dynamics of a system from snapshots of its temporal marginals is a problem which appears throughout natural sciences and machine learning, including in quantum systems, single-cell biological data, and generative modeling. In these settings, we assume access to cross-sectional samples that are uncorrelated over time, rather than full trajectories of samples. In order to better understand the systems under observation, we would like to learn a model of the underlying process that allows us to propagate samples in time and thereby simulate entire individual trajectories. In this work, we propose Action Matching, a method for learning a rich family of dynamics using only independent samples from its time evolution. We derive a tractable training objective, which does not rely on explicit assumptions about the underlying dynamics and does not require back-propagation through differential equations or optimal transport solvers. Inspired by connections with optimal transport, we derive extensions of Action Matching to learn stochastic differential equations and dynamics involving creation and destruction of probability mass. Finally, we showcase applications of Action Matching by achieving competitive performance in a diverse set of experiments from biology, physics, and generative modeling.

Generating graph-structured data requires learning the underlying distribution of graphs. Yet, this is a challenging problem, and the previous graph generative methods either fail to capture the permutation-invariance property of graphs or cannot sufficiently model the complex dependency between nodes and edges, which is crucial for generating real-world graphs such as molecules. To overcome such limitations, we propose a novel score-based generative model for graphs with a continuous-time framework. Specifically, we propose a new graph diffusion process that models the joint distribution of the nodes and edges through a system of stochastic differential equations (SDEs). Then, we derive novel score matching objectives tailored for the proposed diffusion process to estimate the gradient of the joint log-density with respect to each component, and introduce a new solver for the system of SDEs to efficiently sample from the reverse diffusion process. We validate our graph generation method on diverse datasets, on which it either achieves significantly superior or competitive performance to the baselines. Further analysis shows that our method is able to generate molecules that lie close to the training distribution yet do not violate the chemical valency rule, demonstrating the effectiveness of the system of SDEs in modeling the node-edge relationships. Our code is available at https://github.com/harryjo97/GDSS.

The task of locating first order saddle points on high-dimensional surfaces describing the variation of energy as a function of atomic coordinates is an essential step for identifying the mechanism and estimating the rate of thermally activated events within the harmonic approximation of transition state theory. When combined directly with electronic structure calculations, the number of energy and atomic force evaluations needed for convergence is a primary issue. Here, we describe an efficient implementation of Gaussian process regression (GPR) acceleration of the minimum mode following method where a dimer is used to estimate the lowest eigenmode of the Hessian. A surrogate energy surface is constructed and updated after each electronic structure calculation. The method is applied to a test set of 500 molecular reactions previously generated by Hermez and coworkers [J. Chem. Theory Comput. 18, 6974 (2022)]. An order of magnitude reduction in the number of electronic structure calculations needed to reach the saddle point configurations is obtained by using the GPR compared to the dimer method. Despite the wide range in stiffness of the molecular degrees of freedom, the calculations are carried out using Cartesian coordinates and are found to require similar number of electronic structure calculations as an elaborate internal coordinate method implemented in the Sella software package. The present implementation of the GPR surrogate model in C++ is efficient enough for the wall time of the saddle point searches to be reduced in 3 out of 4 cases even though the calculations are carried out at a low Hartree-Fock level.

The classical Coulomb gas model has served as one of the most versatile frameworks in statistical physics, connecting a vast range of phenomena across many different areas. Nonequilibrium generalisations of this model have so far been studied much more scarcely. With the abundance of contemporary research into active and driven systems, one would naturally expect that such generalisations of systems with long-ranged Coulomb-like interactions will form a fertile playground for interesting developments. Here, we present two examples of novel macroscopic behaviour that arise from nonequilibrium fluctuations in long-range interacting systems, namely (1) unscreened long-ranged correlations in strong electrolytes driven by an external electric field and the associated fluctuation-induced forces in the confined Casimir geometry, and (2) out-of-equilibrium critical behaviour in self-chemotactic models that incorporate the particle polarity in the chemotactic response of the cells. Both of these systems have nonlocal Coulomb-like interactions among their constituent particles, namely, the electrostatic interactions in the case of the driven electrolyte, and the chemotactic forces mediated by fast-diffusing signals in the case of self-chemotactic systems. The results presented here hint to the rich phenomenology of nonequilibrium effects that can arise from strong fluctuations in Coulomb interacting systems, and a rich variety of potential future directions, which are discussed.

Machine learning algorithms relying on deep neural networks recently allowed a great leap forward in artificial intelligence. Despite the popularity of their applications, the efficiency of these algorithms remains largely unexplained from a theoretical point of view. The mathematical description of learning problems involves very large collections of interacting random variables, difficult to handle analytically as well as numerically. This complexity is precisely the object of study of statistical physics. Its mission, originally pointed towards natural systems, is to understand how macroscopic behaviors arise from microscopic laws. Mean-field methods are one type of approximation strategy developed in this view. We review a selection of classical mean-field methods and recent progress relevant for inference in neural networks. In particular, we remind the principles of derivations of high-temperature expansions, the replica method and message passing algorithms, highlighting their equivalences and complementarities. We also provide references for past and current directions of research on neural networks relying on mean-field methods.

Large language models (LLMs) have gained widespread interest due to their ability to process human language and perform tasks on which they have not been explicitly trained. This is relevant for the chemical sciences, which face the problem of small and diverse datasets that are frequently in the form of text. LLMs have shown promise in addressing these issues and are increasingly being harnessed to predict chemical properties, optimize reactions, and even design and conduct experiments autonomously. However, we still have only a very limited systematic understanding of the chemical reasoning capabilities of LLMs, which would be required to improve models and mitigate potential harms. Here, we introduce "ChemBench," an automated framework designed to rigorously evaluate the chemical knowledge and reasoning abilities of state-of-the-art LLMs against the expertise of human chemists. We curated more than 7,000 question-answer pairs for a wide array of subfields of the chemical sciences, evaluated leading open and closed-source LLMs, and found that the best models outperformed the best human chemists in our study on average. The models, however, struggle with some chemical reasoning tasks that are easy for human experts and provide overconfident, misleading predictions, such as about chemicals' safety profiles. These findings underscore the dual reality that, although LLMs demonstrate remarkable proficiency in chemical tasks, further research is critical to enhancing their safety and utility in chemical sciences. Our findings also indicate a need for adaptations to chemistry curricula and highlight the importance of continuing to develop evaluation frameworks to improve safe and useful LLMs.

This paper introduces Galactic Bioware's Life Support System, a semi-closed-circuit breathing apparatus designed for integration into a positive-pressure firefighting suit and governed by an AI control system. The breathing loop incorporates a soda lime CO2 scrubber, a silica gel dehumidifier, and pure O2 replenishment with finite consumables. One-way exhaust valves maintain positive pressure while creating a semi-closed system in which outward venting gradually depletes the gas inventory. Part I develops the physicochemical foundations from first principles, including state-consistent thermochemistry, stoichiometric capacity limits, adsorption isotherms, and oxygen-management constraints arising from both fire safety and toxicity. Part II introduces an AI control architecture that fuses three sensor tiers, external environmental sensing, internal suit atmosphere sensing (with triple-redundant O2 cells and median voting), and firefighter biometrics. The controller combines receding-horizon model-predictive control (MPC) with a learned metabolic model and a reinforcement learning (RL) policy advisor, with all candidate actuator commands passing through a final control-barrier-function safety filter before reaching the hardware. This architecture is intended to optimize performance under unknown mission duration and exertion profiles. In this paper we introduce an 18-state, 3-control nonlinear state-space formulation using only sensors viable in structural firefighting, with triple-redundant O2 sensing and median voting. Finally, we introduce an MPC framework with a dynamic resource scarcity multiplier, an RL policy advisor for warm-starting, and a final control-barrier-function safety filter through which all actuator commands must pass, demonstrating 18-34% endurance improvement in simulation over PID baselines while maintaining tighter physiological and fire-safety margins.

While large language models (LLMs) have achieved impressive progress, their application in scientific domains such as chemistry remains hindered by shallow domain understanding and limited reasoning capabilities. In this work, we focus on the specific field of chemistry and develop a Chemical Reasoner LLM, ChemDFM-R. We first construct a comprehensive dataset of atomized knowledge points to enhance the model's understanding of the fundamental principles and logical structure of chemistry. Then, we propose a mix-sourced distillation strategy that integrates expert-curated knowledge with general-domain reasoning skills, followed by domain-specific reinforcement learning to enhance chemical reasoning. Experiments on diverse chemical benchmarks demonstrate that ChemDFM-R achieves state-of-the-art performance while providing interpretable, rationale-driven outputs. Further case studies illustrate how explicit reasoning chains significantly improve the reliability, transparency, and practical utility of the model in real-world human-AI collaboration scenarios.

It is demonstrated that self-diffusion and shear viscosity data for the TIP4P/Ice water model reported recently [L. Baran, W. Rzysko and L. MacDowell, J. Chem. Phys. {\bf 158}, 064503 (2023)] obey the microscopic version of the Stokes-Einstein relation without the hydrodynamic diameter.

The study of the long-time dynamics of quantum systems can be a real challenge, especially in systems like ultracold gases, where the required timescales may be longer than the lifetime of the system itself. In this work, we show that it is possible to access the long-time dynamics of a strongly repulsive atomic gas mixture in shorter times. The shortcut-to-dynamics protocol that we propose does not modify the fate of the observables, but effectively jumps ahead in time without changing the system's inherent evolution. Just like the next-chapter button in a movie player that allows to quickly reach the part of the movie one wants to watch, it is a leap into the future.

While large language models (LLMs) with Chain-of-Thought (CoT) reasoning excel in mathematics and coding, their potential for systematic reasoning in chemistry, a domain demanding rigorous structural analysis for real-world tasks like drug design and reaction engineering, remains untapped. Current benchmarks focus on simple knowledge retrieval, neglecting step-by-step reasoning required for complex tasks such as molecular optimization and reaction prediction. To address this, we introduce ChemCoTBench, a reasoning framework that bridges molecular structure understanding with arithmetic-inspired operations, including addition, deletion, and substitution, to formalize chemical problem-solving into transparent, step-by-step workflows. By treating molecular transformations as modular "chemical operations", the framework enables slow-thinking reasoning, mirroring the logic of mathematical proofs while grounding solutions in real-world chemical constraints. We evaluate models on two high-impact tasks: Molecular Property Optimization and Chemical Reaction Prediction. These tasks mirror real-world challenges while providing structured evaluability. By providing annotated datasets, a reasoning taxonomy, and baseline evaluations, ChemCoTBench bridges the gap between abstract reasoning methods and practical chemical discovery, establishing a foundation for advancing LLMs as tools for AI-driven scientific innovation.

Active matter systems, from self-propelled colloids to motile bacteria, are characterized by the conversion of free energy into useful work at the microscopic scale. These systems generically involve physics beyond the reach of equilibrium statistical mechanics, and a persistent challenge has been to understand the nature of their nonequilibrium states. The entropy production rate and the magnitude of the steady-state probability current provide quantitative ways to do so by measuring the breakdown of time-reversal symmetry and the strength of nonequilibrium transport of measure. Yet, their efficient computation has remained elusive, as they depend on the system's unknown and high-dimensional probability density. Here, building upon recent advances in generative modeling, we develop a deep learning framework that estimates the score of this density. We show that the score, together with the microscopic equations of motion, gives direct access to the entropy production rate, the probability current, and their decomposition into local contributions from individual particles, spatial regions, and degrees of freedom. To represent the score, we introduce a novel, spatially-local transformer-based network architecture that learns high-order interactions between particles while respecting their underlying permutation symmetry. We demonstrate the broad utility and scalability of the method by applying it to several high-dimensional systems of interacting active particles undergoing motility-induced phase separation (MIPS). We show that a single instance of our network trained on a system of 4096 particles at one packing fraction can generalize to other regions of the phase diagram, including systems with as many as 32768 particles. We use this observation to quantify the spatial structure of the departure from equilibrium in MIPS as a function of the number of particles and the packing fraction.

Molecular dynamics (MD) provides insights into atomic-scale processes by integrating over time the equations that describe the motion of atoms under the action of interatomic forces. Machine learning models have substantially accelerated MD by providing inexpensive predictions of the forces, but they remain constrained to minuscule time integration steps, which are required by the fast time scale of atomic motion. In this work, we propose FlashMD, a method to predict the evolution of positions and momenta over strides that are between one and two orders of magnitude longer than typical MD time steps. We incorporate considerations on the mathematical and physical properties of Hamiltonian dynamics in the architecture, generalize the approach to allow the simulation of any thermodynamic ensemble, and carefully assess the possible failure modes of such a long-stride MD approach. We validate FlashMD's accuracy in reproducing equilibrium and time-dependent properties, using both system-specific and general-purpose models, extending the ability of MD simulation to reach the long time scales needed to model microscopic processes of high scientific and technological relevance.

Machine Learning Force Fields (MLFFs) are a promising alternative to expensive ab initio quantum mechanical molecular simulations. Given the diversity of chemical spaces that are of interest and the cost of generating new data, it is important to understand how MLFFs generalize beyond their training distributions. In order to characterize and better understand distribution shifts in MLFFs, we conduct diagnostic experiments on chemical datasets, revealing common shifts that pose significant challenges, even for large foundation models trained on extensive data. Based on these observations, we hypothesize that current supervised training methods inadequately regularize MLFFs, resulting in overfitting and learning poor representations of out-of-distribution systems. We then propose two new methods as initial steps for mitigating distribution shifts for MLFFs. Our methods focus on test-time refinement strategies that incur minimal computational cost and do not use expensive ab initio reference labels. The first strategy, based on spectral graph theory, modifies the edges of test graphs to align with graph structures seen during training. Our second strategy improves representations for out-of-distribution systems at test-time by taking gradient steps using an auxiliary objective, such as a cheap physical prior. Our test-time refinement strategies significantly reduce errors on out-of-distribution systems, suggesting that MLFFs are capable of and can move towards modeling diverse chemical spaces, but are not being effectively trained to do so. Our experiments establish clear benchmarks for evaluating the generalization capabilities of the next generation of MLFFs. Our code is available at https://tkreiman.github.io/projects/mlff_distribution_shifts/.

A longstanding goal of biology is to identify the key genes and species that critically impact evolution, ecology, and health. Network analysis has revealed keystone species that regulate ecosystems and master regulators that regulate cellular genetic networks. Yet these studies have focused on pairwise biological interactions, which can be affected by the context of genetic background and other species present generating higher-order interactions. The important regulators of higher-order interactions are unstudied. To address this, we applied a new high-dimensional geometry approach that quantifies epistasis in a fitness landscape to ask how individual genes and species influence the interactions in the rest of the biological network. We then generated and also reanalyzed 5-dimensional datasets (two genetic, two microbiome). We identified key genes (e.g. the rbs locus and pykF) and species (e.g. Lactobacilli) that control the interactions of many other genes and species. These higher-order master regulators can induce or suppress evolutionary and ecological diversification by controlling the topography of the fitness landscape. Thus, we provide mathematical intuition and justification for exploration of biological networks in higher dimensions.

We investigate a new dynamical system that describes tumor-host interaction. The equation that describes the untreated tumor growth is based on non-extensive statistical mechanics. Recently, this model has been shown to fit successfully exponential, Gompertz, logistic, and power-law tumor growths. We have been able to include as many hallmarks of cancer as possible. We study also the dynamic response of cancer under therapy. Using our model, we can make predictions about the different outcomes when we change the parameters, and/or the initial conditions. We can determine the importance of different factors to influence tumor growth. We discover synergistic therapeutic effects of different treatments and drugs. Cancer is generally untreatable using conventional monotherapy. We consider conventional therapies, oncogene-targeted therapies, tumor-suppressors gene-targeted therapies, immunotherapies, anti-angiogenesis therapies, virotherapy, among others. We need therapies with the potential to target both tumor cells and the tumors' microenvironment. Drugs that target oncogenes and tumor-suppressor genes can be effective in the treatment of some cancers. However, most tumors do reoccur. We have found that the success of the new therapeutic agents can be seen when used in combination with other cancer-cell-killing therapies. Our results have allowed us to design a combinational therapy that can lead to the complete eradication of cancer.

In this paper, we propose feedback designs for manipulating a quantum state to a target state by performing sequential measurements. In light of Belavkin's quantum feedback control theory, for a given set of (projective or non-projective) measurements and a given time horizon, we show that finding the measurement selection policy that maximizes the probability of successful state manipulation is an optimal control problem for a controlled Markovian process. The optimal policy is Markovian and can be solved by dynamical programming. Numerical examples indicate that making use of feedback information significantly improves the success probability compared to classical scheme without taking feedback. We also consider other objective functionals including maximizing the expected fidelity to the target state as well as minimizing the expected arrival time. The connections and differences among these objectives are also discussed.

Machine learning techniques are essential tools to compute efficient, yet accurate, force fields for atomistic simulations. This approach has recently been extended to incorporate quantum computational methods, making use of variational quantum learning models to predict potential energy surfaces and atomic forces from ab initio training data. However, the trainability and scalability of such models are still limited, due to both theoretical and practical barriers. Inspired by recent developments in geometric classical and quantum machine learning, here we design quantum neural networks that explicitly incorporate, as a data-inspired prior, an extensive set of physically relevant symmetries. We find that our invariant quantum learning models outperform their more generic counterparts on individual molecules of growing complexity. Furthermore, we study a water dimer as a minimal example of a system with multiple components, showcasing the versatility of our proposed approach and opening the way towards larger simulations. Our results suggest that molecular force fields generation can significantly profit from leveraging the framework of geometric quantum machine learning, and that chemical systems represent, in fact, an interesting and rich playground for the development and application of advanced quantum machine learning tools.

Generating new molecules is fundamental to advancing critical applications such as drug discovery and material synthesis. Flows can generate molecules effectively by inverting the encoding process, however, existing flow models either require artifactual dequantization or specific node/edge orderings, lack desiderata such as permutation invariance, or induce discrepancy between the encoding and the decoding steps that necessitates post hoc validity correction. We circumvent these issues with novel continuous normalizing E(3)-equivariant flows, based on a system of node ODEs coupled as a graph PDE, that repeatedly reconcile locally toward globally aligned densities. Our models can be cast as message-passing temporal networks, and result in superlative performance on the tasks of density estimation and molecular generation. In particular, our generated samples achieve state-of-the-art on both the standard QM9 and ZINC250K benchmarks.

Supervised learning on molecules has incredible potential to be useful in chemistry, drug discovery, and materials science. Luckily, several promising and closely related neural network models invariant to molecular symmetries have already been described in the literature. These models learn a message passing algorithm and aggregation procedure to compute a function of their entire input graph. At this point, the next step is to find a particularly effective variant of this general approach and apply it to chemical prediction benchmarks until we either solve them or reach the limits of the approach. In this paper, we reformulate existing models into a single common framework we call Message Passing Neural Networks (MPNNs) and explore additional novel variations within this framework. Using MPNNs we demonstrate state of the art results on an important molecular property prediction benchmark; these results are strong enough that we believe future work should focus on datasets with larger molecules or more accurate ground truth labels.

In recent years, diffusion-based models have demonstrated exceptional performance in searching for simultaneously stable, unique, and novel (S.U.N.) crystalline materials. However, most of these models don't have the ability to change the number of atoms in the crystal during the generation process, which limits the variability of model sampling trajectories. In this paper, we demonstrate the severity of this restriction and introduce a simple yet powerful technique, mirage infusion, which enables diffusion models to change the state of the atoms that make up the crystal from existent to non-existent (mirage) and vice versa. We show that this technique improves model quality by up to times2.5 compared to the same model without this modification. The resulting model, Mirage Atom Diffusion (MiAD), is an equivariant joint diffusion model for de novo crystal generation that is capable of altering the number of atoms during the generation process. MiAD achieves an 8.2% S.U.N. rate on the MP-20 dataset, which substantially exceeds existing state-of-the-art approaches. The source code can be found at https://github.com/andrey-okhotin/miad.git{github.com/andrey-okhotin/miad}.

Numerous biological and physical processes can be modeled as systems of interacting entities evolving continuously over time, e.g. the dynamics of communicating cells or physical particles. Learning the dynamics of such systems is essential for predicting the temporal evolution of populations across novel samples and unseen environments. Flow-based models allow for learning these dynamics at the population level - they model the evolution of the entire distribution of samples. However, current flow-based models are limited to a single initial population and a set of predefined conditions which describe different dynamics. We argue that multiple processes in natural sciences have to be represented as vector fields on the Wasserstein manifold of probability densities. That is, the change of the population at any moment in time depends on the population itself due to the interactions between samples. In particular, this is crucial for personalized medicine where the development of diseases and their respective treatment response depends on the microenvironment of cells specific to each patient. We propose Meta Flow Matching (MFM), a practical approach to integrating along these vector fields on the Wasserstein manifold by amortizing the flow model over the initial populations. Namely, we embed the population of samples using a Graph Neural Network (GNN) and use these embeddings to train a Flow Matching model. This gives MFM the ability to generalize over the initial distributions unlike previously proposed methods. We demonstrate the ability of MFM to improve prediction of individual treatment responses on a large scale multi-patient single-cell drug screen dataset.

Molecular representation is a foundational element in our understanding of the physical world. Its importance ranges from the fundamentals of chemical reactions to the design of new therapies and materials. Previous molecular machine learning models have employed strings, fingerprints, global features, and simple molecular graphs that are inherently information-sparse representations. However, as the complexity of prediction tasks increases, the molecular representation needs to encode higher fidelity information. This work introduces a novel approach to infusing quantum-chemical-rich information into molecular graphs via stereoelectronic effects. We show that the explicit addition of stereoelectronic interactions significantly improves the performance of molecular machine learning models. Furthermore, stereoelectronics-infused representations can be learned and deployed with a tailored double graph neural network workflow, enabling its application to any downstream molecular machine learning task. Finally, we show that the learned representations allow for facile stereoelectronic evaluation of previously intractable systems, such as entire proteins, opening new avenues of molecular design.

Retrosynthesis planning is a fundamental challenge in chemistry which aims at designing reaction pathways from commercially available starting materials to a target molecule. Each step in multi-step retrosynthesis planning requires accurate prediction of possible precursor molecules given the target molecule and confidence estimates to guide heuristic search algorithms. We model single-step retrosynthesis planning as a distribution learning problem in a discrete state space. First, we introduce the Markov Bridge Model, a generative framework aimed to approximate the dependency between two intractable discrete distributions accessible via a finite sample of coupled data points. Our framework is based on the concept of a Markov bridge, a Markov process pinned at its endpoints. Unlike diffusion-based methods, our Markov Bridge Model does not need a tractable noise distribution as a sampling proxy and directly operates on the input product molecules as samples from the intractable prior distribution. We then address the retrosynthesis planning problem with our novel framework and introduce RetroBridge, a template-free retrosynthesis modeling approach that achieves state-of-the-art results on standard evaluation benchmarks.

This paper introduces a continuous-time stochastic dynamical framework for understanding how large language models (LLMs) may self-amplify latent biases or toxicity through their own chain-of-thought reasoning. The model posits an instantaneous "severity" variable x(t) in [0,1] evolving under a stochastic differential equation (SDE) with a drift term μ(x) and diffusion σ(x). Crucially, such a process can be consistently analyzed via the Fokker--Planck approach if each incremental step behaves nearly Markovian in severity space. The analysis investigates critical phenomena, showing that certain parameter regimes create phase transitions from subcritical (self-correcting) to supercritical (runaway severity). The paper derives stationary distributions, first-passage times to harmful thresholds, and scaling laws near critical points. Finally, it highlights implications for agents and extended LLM reasoning models: in principle, these equations might serve as a basis for formal verification of whether a model remains stable or propagates bias over repeated inferences.

We seek to automate the design of molecules based on specific chemical properties. In computational terms, this task involves continuous embedding and generation of molecular graphs. Our primary contribution is the direct realization of molecular graphs, a task previously approached by generating linear SMILES strings instead of graphs. Our junction tree variational autoencoder generates molecular graphs in two phases, by first generating a tree-structured scaffold over chemical substructures, and then combining them into a molecule with a graph message passing network. This approach allows us to incrementally expand molecules while maintaining chemical validity at every step. We evaluate our model on multiple tasks ranging from molecular generation to optimization. Across these tasks, our model outperforms previous state-of-the-art baselines by a significant margin.

Graph neural networks (GNNs) have been used extensively for addressing problems in drug design and discovery. Both ligand and target molecules are represented as graphs with node and edge features encoding information about atomic elements and bonds respectively. Although existing deep learning models perform remarkably well at predicting physicochemical properties and binding affinities, the generation of new molecules with optimized properties remains challenging. Inherently, most GNNs perform poorly in whole-graph representation due to the limitations of the message-passing paradigm. Furthermore, step-by-step graph generation frameworks that use reinforcement learning or other sequential processing can be slow and result in a high proportion of invalid molecules with substantial post-processing needed in order to satisfy the principles of stoichiometry. To address these issues, we propose a representation-first approach to molecular graph generation. We guide the latent representation of an autoencoder by capturing graph structure information with the geometric scattering transform and apply penalties that structure the representation also by molecular properties. We show that this highly structured latent space can be directly used for molecular graph generation by the use of a GAN. We demonstrate that our architecture learns meaningful representations of drug datasets and provides a platform for goal-directed drug synthesis.

In this work, we generalize the reaction-diffusion equation in statistical physics, Schr\"odinger equation in quantum mechanics, Helmholtz equation in paraxial optics into the neural partial differential equations (NPDE), which can be considered as the fundamental equations in the field of artificial intelligence research. We take finite difference method to discretize NPDE for finding numerical solution, and the basic building blocks of deep neural network architecture, including multi-layer perceptron, convolutional neural network and recurrent neural networks, are generated. The learning strategies, such as Adaptive moment estimation, L-BFGS, pseudoinverse learning algorithms and partial differential equation constrained optimization, are also presented. We believe it is of significance that presented clear physical image of interpretable deep neural networks, which makes it be possible for applying to analog computing device design, and pave the road to physical artificial intelligence.

Large language models (LLMs) have recently demonstrated promising capabilities in chemistry tasks while still facing challenges due to outdated pretraining knowledge and the difficulty of incorporating specialized chemical expertise. To address these issues, we propose an LLM-based agent that synergistically integrates 137 external chemical tools created ranging from basic information retrieval to complex reaction predictions, and a dataset curation pipeline to generate the dataset ChemToolBench that facilitates both effective tool selection and precise parameter filling during fine-tuning and evaluation. We introduce a Hierarchical Evolutionary Monte Carlo Tree Search (HE-MCTS) framework, enabling independent optimization of tool planning and execution. By leveraging self-generated data, our approach supports step-level fine-tuning (FT) of the policy model and training task-adaptive PRM and ORM that surpass GPT-4o. Experimental evaluations demonstrate that our approach significantly improves performance in Chemistry QA and discovery tasks, offering a robust solution to integrate specialized tools with LLMs for advanced chemical applications. All datasets and code are available at https://github.com/AI4Chem/ChemistryAgent .

We study growth of solid tumors in a partial differential equation model introduced by Hillen et al for the interaction between tumor cells (TCs) and cancer stem cells (CSCs). We find that invasion into the cancer-free state may be separated into two regimes, depending on the death rate of tumor cells. In the first, staged invasion regime, invasion into the cancer-free state is lead by tumor cells, which are then subsequently invaded at a slower speed by cancer stem cells. In the second, TC extinction regime, cancer stem cells directly invade the cancer-free state. Relying on recent results establishing front selection propagation under marginal stability assumptions, we use geometric singular perturbation theory to establish existence and selection properties of front solutions which describe both the primary and secondary invasion processes. With rigorous predictions for the invasion speeds, we are then able to heuristically predict how the total cancer mass as a function of time depends on the TC death rate, finding in some situations a tumor invasion paradox, in which increasing the TC death rate leads to an increase in the total cancer mass. Our methods give a general approach for verifying linear determinacy of spreading speeds of invasion fronts in systems with fast-slow structure.

Astrochemical models of interstellar clouds, the sites of stars, and planet formation require information about spin-state chemistry to allow quantitative comparison with spectroscopic observations. In particular, it is important to know if full scrambling or H abstraction (also known as proton hopping) takes place in ion-neutral reactions. The reaction of Cl+ and HCl+ with H2 and isotopologues has been studied at cryogenic temperatures between 20 and 180 K using a 22 pole radio frequency ion trap. Isotopic exchange processes are used to probe the reaction mechanism of the HCl+ + H2 reaction. The results are compared with previous measurements and theoretical predictions. The rate coefficients for the Cl+ + H2 and HCl+ + H2 reactions are found to be constant in the range of temperatures studied, except for the DCl+ + D2 reaction, where a weak negative temperature dependence is observed, and reactions with D2 are found to be significantly slower than the Langevin rate. No isotopic exchange reactions are observed to occur for the H2Cl+ ion. The analysis of the products of the HCl+ + H2 isotopic system clearly indicates that the reaction proceeds via simple hydrogen atom abstraction.

Recent advances in diffusion models have shown remarkable potential in the conditional generation of novel molecules. These models can be guided in two ways: (i) explicitly, through additional features representing the condition, or (ii) implicitly, using a property predictor. However, training property predictors or conditional diffusion models requires an abundance of labeled data and is inherently challenging in real-world applications. We propose a novel approach that attenuates the limitations of acquiring large labeled datasets by leveraging domain knowledge from quantum chemistry as a non-differentiable oracle to guide an unconditional diffusion model. Instead of relying on neural networks, the oracle provides accurate guidance in the form of estimated gradients, allowing the diffusion process to sample from a conditional distribution specified by quantum chemistry. We show that this results in more precise conditional generation of novel and stable molecular structures. Our experiments demonstrate that our method: (1) significantly reduces atomic forces, enhancing the validity of generated molecules when used for stability optimization; (2) is compatible with both explicit and implicit guidance in diffusion models, enabling joint optimization of molecular properties and stability; and (3) generalizes effectively to molecular optimization tasks beyond stability optimization.

Dynamic Mode Decomposition (DMD) is an equation-free method that aims at reconstructing the best linear fit from temporal datasets. In this paper, we show that DMD does not provide accurate approximation for datasets describing oscillatory dynamics, like spiral waves and relaxation oscillations, or spatio-temporal Turing instability. Inspired from the classical "divide and conquer" approach, we propose a piecewise version of DMD (pDMD) to overcome this problem. The main idea is to split the original dataset in N submatrices and then apply the exact (randomized) DMD method in each subset of the obtained partition. We describe the pDMD algorithm in detail and we introduce some error indicators to evaluate its performance when N is increased. Numerical experiments show that very accurate reconstructions are obtained by pDMD for datasets arising from time snapshots of some reaction-diffusion PDE systems, like the FitzHugh-Nagumo model, the lambda-omega system and the DIB morpho-chemical system for battery modeling.

Liquid electrolytes are critical components of next-generation energy storage systems, enabling fast ion transport, minimizing interfacial resistance, and ensuring electrochemical stability for long-term battery performance. However, measuring electrolyte properties and designing formulations remain experimentally and computationally expensive. In this work, we present a unified framework for designing liquid electrolyte formulation, integrating a forward predictive model with an inverse generative approach. Leveraging both computational and experimental data collected from literature and extensive molecular simulations, we train a predictive model capable of accurately estimating electrolyte properties from ionic conductivity to solvation structure. Our physics-informed architecture preserves permutation invariance and incorporates empirical dependencies on temperature and salt concentration, making it broadly applicable to property prediction tasks across molecular mixtures. Furthermore, we introduce -- to the best of our knowledge -- the first generative machine learning framework for molecular mixture design, demonstrated on electrolyte systems. This framework supports multi-condition-constrained generation, addressing the inherently multi-objective nature of materials design. As a proof of concept, we experimentally identified three liquid electrolytes with both high ionic conductivity and anion-concentrated solvation structure. This unified framework advances data-driven electrolyte design and can be readily extended to other complex chemical systems beyond electrolytes.

In this technical report, we propose ChemVLM, the first open-source multimodal large language model dedicated to the fields of chemistry, designed to address the incompatibility between chemical image understanding and text analysis. Built upon the VIT-MLP-LLM architecture, we leverage ChemLLM-20B as the foundational large model, endowing our model with robust capabilities in understanding and utilizing chemical text knowledge. Additionally, we employ InternVIT-6B as a powerful image encoder. We have curated high-quality data from the chemical domain, including molecules, reaction formulas, and chemistry examination data, and compiled these into a bilingual multimodal question-answering dataset. We test the performance of our model on multiple open-source benchmarks and three custom evaluation sets. Experimental results demonstrate that our model achieves excellent performance, securing state-of-the-art results in five out of six involved tasks. Our model can be found at https://huggingface.co/AI4Chem/ChemVLM-26B.

Organosulfur species are potential major carriers of sulfur in the interstellar medium, as well as interesting ingredients in prebiotic chemistry. The most fundamental question regarding these species is under which conditions they reside in the gas versus solid phase. Here, we characterize the thermal desorption kinetics, binding energies, and entrapment of the organosulfur methyl mercaptan (CH_3SH, or MeSH) in different ice environments, comparing them with those of methanol (CH_3OH, or MeOH) ices. The derived multi-layer (pure MeSH-MeSH) and sub-monolayer (layered MeSH-H_2O) binding energies are surprisingly similar, corresponding to snow line locations where the disk midplane temperature is ~105 K. In both H_2O-dominated and more realistic H_2O:CO_2-dominated ices, 100% of the MeSH is entrapped, almost exclusively desorbing at the molecular volcano desorption peak, indicating that MeSH is retained at the water snow line if initially mixed with water ice during formation. Additionally, the presence of MeSH in an ice mixture enhances the entrapment of CO_2 and MeOH (up to 100%) until the onset of volcano desorption; without MeSH, both desorb at their respective pure desorption temperatures and also co-desorb with water. Compared to MeOH, MeSH binds less well to water, explaining why MeSH escapes during water ice crystallization rather than co-desorbing with water. These results show the larger relative size of MeSH compared to MeOH significantly impacts its ability to bind to water and its entrapment efficiency. Therefore, molecular size plays an important role in the adsorption and retention of S-bearing organics and, in turn, other volatiles in ices.