Jackellie/QR_Bocca

** Controlnet QR Bocca for SD-1.5 **控制網QR Bocca適用於SD-1.5

Model Description

The development of this model primarily focuses on beautification and scanning stability. While this model has good stability, it can still be influenced by the choice of models used in combination.

How to Use

1、For QR codes, it is recommended to use version 5 or 6,and process the area outside the QR code into gray,This will extend the image more efficiently.. 2、You can set the parameters according to the original A1111 settings: Step 20 / CFG 7 / Use Euler A for sampling and DPM++ 2M SDE Karras for relative stability. 3、A smaller size might lead to a reduction in scanning rate or image quality. It is recommended to use a minimum size of 768x768. 4、Please try with low weights first, then gradually increase the control net weights using the same seed to achieve an excellent final product. 5、This is very important. Please input a QR code that has not been deformed to ensure stability in the output

Example Outputs

Here are some examples of creative, yet scannable QR codes produced by our model:

If you have any other requests, feel free to let me know. YT: https://www.youtube.com/@JackEllie DC: https://discord.gg/TM5d89YNwA

模型說明

此模型的開發主要著重於多風格的美化及加強掃描穩定性 雖然這個模型的穩定性遠優於從前，但是依然會受到選擇使用搭配的模型影響

如何使用

1、QRcode版本建議使用5或6，並將QR code以外的區域改成灰色，這將能更有效的將畫面延伸。 2、參數可依照A1111原始參數設定就好(步數 20 / CFG 7 / 取樣方式使用Euler a 和DPM++ 2M SDE Karras相對穩定) 3、較小的尺寸可能會導致掃描率或是畫面品質降低，建議最少使用768*768尺寸 4、請以低權重嘗試後再使用相同種子將控制網權重慢慢往上調整，以獲得優秀的成品 5、這非常的重要，請輸入沒有變形過的qrcode，以保證輸出的穩定度

此模型製作範例圖

以下是我們的模型生成的一些美化且可掃描的二維碼示例：

開心地玩耍吧!!!有任何有趣的想法記得到杰克艾粒的yt或dc找我們喔~~~ YT: https://www.youtube.com/@JackEllie DC: https://discord.gg/TM5d89YNwA